MIBs Depot

WEBMON-EDGE-MATRIX-MIB

Registered at
1.3.6.1.4.1.994
Last updated
2015-08-04 18:50
Organization
Dantel, Inc.
Revisions
2015-08-04 18:50
Namespace
dantel
Source file
WEBMON-EDGE-MATRIX-MIB
Digest
sha256:98841e4103cb322cc8b25115a72f63c7ff08cbe79da0b66bca817ce557607b6b

Description

WebMon Edge-Matrix MIB.

Contact

Dantel, Inc. P.O. Box 55013 Fresno, CA 93747-5013 For customer support, call: 1-800-4-DANTEL

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
WEBMON-EDGE-MATRIX-MIB

Textual conventions

NameOIDSyntaxAccessStatus
AnalogState
TEXTUAL-CONVENTION
Defines states for an analog input.
current
BaudRate
TEXTUAL-CONVENTION
Defines baud rates for serial communication.
current
Boolean
TEXTUAL-CONVENTION
A type with only two states.
current
CameraStyle
TEXTUAL-CONVENTION
Defines the different types of IP cameras supported.
current
Configured
TEXTUAL-CONVENTION
In use
current
ConfiguredState
TEXTUAL-CONVENTION
current
ConnectivityState
TEXTUAL-CONVENTION
Used for the state of a connection.
current
ContactStyle
TEXTUAL-CONVENTION
Defines the different types of discrete alarm contacts.
current
DataBits
TEXTUAL-CONVENTION
Defines the number of data bits in a byte for serial communication.
current
DayOfWeek
TEXTUAL-CONVENTION
Day of the week
current
DescriptionString
TEXTUAL-CONVENTION
A character string used for descriptions.
current
DigitalState
TEXTUAL-CONVENTION
A type with only two states, used specifically to represent the state of a digital reading.
current
DiscreteFormula
TEXTUAL-CONVENTION
Defines the type of formula used for derived discretes.
current
EthernetRate
TEXTUAL-CONVENTION
Ethernet Rate
current
EthernetType
TEXTUAL-CONVENTION
Ethernet Type
current
IOFormat
TEXTUAL-CONVENTION
Defines the physical pin layout of slot cards.
current
Level
TEXTUAL-CONVENTION
Describes a priority or level.
current
MODBUSCommand
TEXTUAL-CONVENTION
Function code
current
MeasureStyle
TEXTUAL-CONVENTION
Defines state of measurement style English or Metic.
current
OutputMode
TEXTUAL-CONVENTION
Defines the different ways a control point can be activated.
current
OutputState
TEXTUAL-CONVENTION
Defines states for an output.
current
Parity
TEXTUAL-CONVENTION
Defines the parity for serial communication.
current
PortType
TEXTUAL-CONVENTION
Defines the type of serial port.
current
ProductType
TEXTUAL-CONVENTION
Defines the type of device.
current
Protocol
TEXTUAL-CONVENTION
Defines different protocols used for communication.
current
SNMPAccess
TEXTUAL-CONVENTION
Auth/Priv type
current
SNMPCommandType
TEXTUAL-CONVENTION
Command type
current
SNMPVarbindType
TEXTUAL-CONVENTION
Value type
current
SensorType
TEXTUAL-CONVENTION
Sensor Type
current
SerialCTS
TEXTUAL-CONVENTION
Defines the different CTS states for serial communication.
current
SerialRTS
TEXTUAL-CONVENTION
Defines the different RTS states for serial communication.
current
SlotId
TEXTUAL-CONVENTION
Defines the different types of slot types available.
current
SnmpVersion
TEXTUAL-CONVENTION
Defines which version of SNMP is used for traps.
current
StopBits
TEXTUAL-CONVENTION
Defines the number of stop bits in a byte for serial communication.
current
TL1Dirn
TEXTUAL-CONVENTION
Direction
current
TL1Issue
TEXTUAL-CONVENTION
TL1 Issue
current
TL1Locn
TEXTUAL-CONVENTION
Location
current
TL1Srveff
TEXTUAL-CONVENTION
Service Effecting
current
UseDialout
TEXTUAL-CONVENTION
Use Dialout
current
VoltageRange
TEXTUAL-CONVENTION
Defines the valid voltage ranges.
current

Objects

NameOIDSyntaxAccessStatus
dantel
OBJECT-IDENTITY
1.3.6.1.4.1.994
dantelProducts
OBJECT-IDENTITY
1.3.6.1.4.1.994.3
webMon
OBJECT-IDENTITY
The parent node representing the WebMon device.
1.3.6.1.4.1.994.3.4current
traps
OBJECT-IDENTITY
Category containing all the traps. Each trap has sibling data nodes that contain the data associated with the most recently sent trap of that particular type. A GET-REQUEST sent to the WebMon for those data nodes will allow you to verify the data received in a recent trap.
1.3.6.1.4.1.994.3.4.6current
analogInputs
OBJECT-IDENTITY
Subtree containing trap and associated data for analog inputs. Analog inputs measure a value. The input always has a live reading, but traps are only sent on events, which are defined as the live reading crossing (or passing) one of the user-defined thresholds.
1.3.6.1.4.1.994.3.4.6.1current
analogInputDescription
OBJECT-TYPE
Description of the analog input.
1.3.6.1.4.1.994.3.4.6.1.2DescriptionStringread-onlycurrent
analogLiveLevel
OBJECT-TYPE
The level associated with the analogLiveReading for this input.
1.3.6.1.4.1.994.3.4.6.1.3Levelread-onlycurrent
analogLiveReading
OBJECT-TYPE
The reading from the analog input described by analogInputDescription at the time the trap was sent. It is in the units described in analogUnitsOfMeasurement.
1.3.6.1.4.1.994.3.4.6.1.5DescriptionStringread-onlycurrent
analogUnitsOfMeasurement
OBJECT-TYPE
The units of measurement associated with the analogLiveReading.
1.3.6.1.4.1.994.3.4.6.1.6DescriptionStringread-onlycurrent
analogLiveState
OBJECT-TYPE
The state associated with analogLiveReading.
1.3.6.1.4.1.994.3.4.6.1.7AnalogStateread-onlycurrent
analogLiveStateDescription
OBJECT-TYPE
The description of the range in which the analogLiveReading is.
1.3.6.1.4.1.994.3.4.6.1.8DescriptionStringread-onlycurrent
analogAlarmState
OBJECT-TYPE
If true this field indicates the alarmed state. If false this field indicates the not alarmed state.
1.3.6.1.4.1.994.3.4.6.1.9Booleanread-onlycurrent
analogSourceDescription
OBJECT-TYPE
Description of the event source.
1.3.6.1.4.1.994.3.4.6.1.101DescriptionStringnot-accessiblecurrent
analogSourceIndex
OBJECT-TYPE
Index of the event source.
1.3.6.1.4.1.994.3.4.6.1.102Integer32not-accessiblecurrent
digitalInputs
OBJECT-IDENTITY
Subtree containing trap and associated data for digital inputs. Digital inputs monitor a binary state. The input is always in one of two states. Traps are sent on events, which are defined as a change in the live state.
1.3.6.1.4.1.994.3.4.6.2current
digitalInputDescription
OBJECT-TYPE
Description of the digital input.
1.3.6.1.4.1.994.3.4.6.2.2DescriptionStringread-onlycurrent
digitalLiveLevel
OBJECT-TYPE
The level associated with digitalLiveState for this input.
1.3.6.1.4.1.994.3.4.6.2.3Levelread-onlycurrent
digitalLiveState
OBJECT-TYPE
The state of the digital input described by digitalInputDescription at the time the trap was sent.
1.3.6.1.4.1.994.3.4.6.2.4DigitalStateread-onlycurrent
digitalLiveStateDescription
OBJECT-TYPE
The description of the digitalLiveState.
1.3.6.1.4.1.994.3.4.6.2.5DescriptionStringread-onlycurrent
digitalAlarmState
OBJECT-TYPE
If true this field indicates the alarmed state. If false this field indicates the not alarmed state.
1.3.6.1.4.1.994.3.4.6.2.6Booleanread-onlycurrent
digitalSourceDescription
OBJECT-TYPE
Description of the event source.
1.3.6.1.4.1.994.3.4.6.2.101DescriptionStringnot-accessiblecurrent
digitalSourceIndex
OBJECT-TYPE
Index of the event source.
1.3.6.1.4.1.994.3.4.6.2.102Integer32not-accessiblecurrent
remoteDevices
OBJECT-IDENTITY
Subtree containing trap and associated data for monitored remote devices. Remote devices are monitored for network connectivity. The device's live state is always either online or offline. Traps are sent on events, which are defined as a change in the live state.
1.3.6.1.4.1.994.3.4.6.3current
remoteDeviceDescription
OBJECT-TYPE
Description of the remote device.
1.3.6.1.4.1.994.3.4.6.3.2DescriptionStringread-onlycurrent
remoteDeviceLiveLevel
OBJECT-TYPE
The level associated with remoteDeviceLiveState.
1.3.6.1.4.1.994.3.4.6.3.3Levelread-onlycurrent
remoteDeviceLiveState
OBJECT-TYPE
The state of the remote device described by remoteDeviceDescription at the time the trap was sent. Online indicates connected, offline indicates not connected.
1.3.6.1.4.1.994.3.4.6.3.4ConnectivityStateread-onlycurrent
remoteDeviceAlarmState
OBJECT-TYPE
If true this field indicates the alarmed state. If false this field indicates the not alarmed state.
1.3.6.1.4.1.994.3.4.6.3.5Booleanread-onlycurrent
remoteDeviceSourceDescription
OBJECT-TYPE
Description of the event source.
1.3.6.1.4.1.994.3.4.6.3.101DescriptionStringnot-accessiblecurrent
remoteDeviceSourceIndex
OBJECT-TYPE
Index of the event source.
1.3.6.1.4.1.994.3.4.6.3.102Integer32not-accessiblecurrent
faults
OBJECT-IDENTITY
Subtree containing trap and associated data for faults. Faults are conditions internal to the WebMon. The only data associated with this trap is a string that describes the condition.
1.3.6.1.4.1.994.3.4.6.4current
faultDescription
OBJECT-TYPE
Description of the condition at the WebMon.
1.3.6.1.4.1.994.3.4.6.4.2DescriptionStringread-onlycurrent
faultLiveLevel
OBJECT-TYPE
The level associated with faultStateDescription.
1.3.6.1.4.1.994.3.4.6.4.3Levelread-onlycurrent
faultStateDescription
OBJECT-TYPE
The description of the state of this fault.
1.3.6.1.4.1.994.3.4.6.4.4DescriptionStringread-onlycurrent
faultAlarmState
OBJECT-TYPE
If true this field indicates the alarmed state. If false this field indicates the not alarmed state.
1.3.6.1.4.1.994.3.4.6.4.5Booleanread-onlycurrent
faultSourceDescription
OBJECT-TYPE
Description of the event source.
1.3.6.1.4.1.994.3.4.6.4.101DescriptionStringnot-accessiblecurrent
faultSourceIndex
OBJECT-TYPE
Index of the event source.
1.3.6.1.4.1.994.3.4.6.4.102Integer32not-accessiblecurrent
configuration
OBJECT-IDENTITY
1.3.6.1.4.1.994.3.4.7
systemGeneral
OBJECT-IDENTITY
1.3.6.1.4.1.994.3.4.7.1
systemGeneralLocation
OBJECT-TYPE
Location on the device.
1.3.6.1.4.1.994.3.4.7.1.2DescriptionStringread-writecurrent
systemGeneralDescription
OBJECT-TYPE
Description of the device.
1.3.6.1.4.1.994.3.4.7.1.3DescriptionStringread-writecurrent
systemGeneralIpAddress
OBJECT-TYPE
IP Address of the device. If changed, the new IP address will only take effect after a reset.
1.3.6.1.4.1.994.3.4.7.1.14IpAddressread-writecurrent
systemGeneralSubnetMask
OBJECT-TYPE
Subnet Mask of the device. If changed, the new IP address will only take effect after a reset.
1.3.6.1.4.1.994.3.4.7.1.15IpAddressread-writecurrent
systemGeneralGatewayAddress
OBJECT-TYPE
Gateway Address of the device. If changed, the new IP address will only take effect after a reset.
1.3.6.1.4.1.994.3.4.7.1.16IpAddressread-writecurrent
systemGeneralReadPeriod
OBJECT-TYPE
The number of minutes until the WebMon resets itself.
1.3.6.1.4.1.994.3.4.7.1.23Integer32read-writecurrent
systemGeneralMeasureStyle
OBJECT-TYPE
Determines if units are displayed in English or Metric.
1.3.6.1.4.1.994.3.4.7.1.45MeasureStyleread-writecurrent
systemGeneralMacAddress
OBJECT-TYPE
The MAC address of the device.
1.3.6.1.4.1.994.3.4.7.1.54DescriptionStringread-onlycurrent
systemGeneralProductType
OBJECT-TYPE
Describes the type of device.
1.3.6.1.4.1.994.3.4.7.1.70ProductTyperead-onlycurrent
systemGeneralIPPortNum
OBJECT-TYPE
IP port number to use when connecting to the web page (HTTP).
1.3.6.1.4.1.994.3.4.7.1.73Integer32read-writecurrent
systemGeneralVersion
OBJECT-TYPE
The version of the running software.
1.3.6.1.4.1.994.3.4.7.1.82DescriptionStringread-onlycurrent
systemGeneralUseResetTime
OBJECT-TYPE
If enabled, the WebMon will reset periodically.
1.3.6.1.4.1.994.3.4.7.1.98Booleanread-writecurrent
systemGeneralEthernetType
OBJECT-TYPE
Ethernet duplex type of the device. If changed, the new duplex type will only take effect after a reset.
1.3.6.1.4.1.994.3.4.7.1.147EthernetTyperead-writecurrent
systemGeneralEthernetRate
OBJECT-TYPE
Ethernet rate of the device. If changed, the new rate will only take effect after a reset.
1.3.6.1.4.1.994.3.4.7.1.148EthernetRateread-writecurrent
systemGeneralContact
OBJECT-TYPE
SNMP contact information.
1.3.6.1.4.1.994.3.4.7.1.149DescriptionStringread-writecurrent
pTrapTargetTable
OBJECT-TYPE
Table for configuration of TrapTarget
1.3.6.1.4.1.994.3.4.7.2not-accessiblecurrent
pTrapTargetEntry
OBJECT-TYPE
Entry for configuration table of TrapTarget
1.3.6.1.4.1.994.3.4.7.2.1not-accessiblecurrent
pTrapTargetDescription
OBJECT-TYPE
Description of the trap target.
1.3.6.1.4.1.994.3.4.7.2.1.3DescriptionStringread-writecurrent
pTrapTargetConfigured
OBJECT-TYPE
Determines if traps will be sent to trap target with given IP address.
1.3.6.1.4.1.994.3.4.7.2.1.10Configuredread-writecurrent
pTrapTargetIpAddress
OBJECT-TYPE
SNMP traps are sent to this IP address.
1.3.6.1.4.1.994.3.4.7.2.1.14IpAddressread-writecurrent
pTrapTargetSnmpVersion
OBJECT-TYPE
Indicates the version of SNMP trap to use.
1.3.6.1.4.1.994.3.4.7.2.1.42SnmpVersionread-writecurrent
pTrapTargetIPPortNum
OBJECT-TYPE
SNMP traps are sent to this network port.
1.3.6.1.4.1.994.3.4.7.2.1.73Integer32read-writecurrent
pTrapTargetBackupIPAddress
OBJECT-TYPE
Used only when dialing out as backup.
1.3.6.1.4.1.994.3.4.7.2.1.78IpAddressread-writecurrent
pTrapTargetUseDialout
OBJECT-TYPE
Determines if traps will be sent only when dialed out.
1.3.6.1.4.1.994.3.4.7.2.1.125UseDialoutread-writecurrent
pTrapTargetDialoutTarget
OBJECT-TYPE
Determines which target to dial out to when sending traps.
1.3.6.1.4.1.994.3.4.7.2.1.126Integer32read-writecurrent
pTrapTargetAuthKey
OBJECT-TYPE
1.3.6.1.4.1.994.3.4.7.2.1.140DescriptionStringread-writecurrent
pTrapTargetPrivKey
OBJECT-TYPE
1.3.6.1.4.1.994.3.4.7.2.1.141DescriptionStringread-writecurrent
pTrapTargetSNMPAccess
OBJECT-TYPE
1.3.6.1.4.1.994.3.4.7.2.1.142SNMPAccessread-writecurrent
pTrapTargetEngineID
OBJECT-TYPE
1.3.6.1.4.1.994.3.4.7.2.1.143DescriptionStringread-writecurrent
pTrapTargetIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.2.1.999Integer32 (1..16)read-onlycurrent
pEmailTable
OBJECT-TYPE
Table for configuration of Email
1.3.6.1.4.1.994.3.4.7.3not-accessiblecurrent
pEmailEntry
OBJECT-TYPE
Entry for configuration table of Email
1.3.6.1.4.1.994.3.4.7.3.1not-accessiblecurrent
pEmailAddress
OBJECT-TYPE
Email events will be sent to this address.
1.3.6.1.4.1.994.3.4.7.3.1.1DescriptionStringread-writecurrent
pEmailDescription
OBJECT-TYPE
Description of the Email target.
1.3.6.1.4.1.994.3.4.7.3.1.3DescriptionStringread-writecurrent
pEmailConfigured
OBJECT-TYPE
If set to true, email events will be sent to given address. If set to false, email will not be sent.
1.3.6.1.4.1.994.3.4.7.3.1.10Configuredread-writecurrent
pEmailIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.3.1.999Integer32 (1..16)read-onlycurrent
pRemoteSensorTable
OBJECT-TYPE
Table for configuration of RemoteSensor
1.3.6.1.4.1.994.3.4.7.5not-accessiblecurrent
pRemoteSensorEntry
OBJECT-TYPE
Entry for configuration table of RemoteSensor
1.3.6.1.4.1.994.3.4.7.5.1not-accessiblecurrent
pRemoteSensorDescription
OBJECT-TYPE
Description of the Analog device.
1.3.6.1.4.1.994.3.4.7.5.1.3DescriptionStringread-writecurrent
pRemoteSensorDesc0
OBJECT-TYPE
The description for values between threshold 0 and threshold 1.
1.3.6.1.4.1.994.3.4.7.5.1.4DescriptionStringread-writecurrent
pRemoteSensorDesc1
OBJECT-TYPE
The description for values between threshold 1 and threshold 2.
1.3.6.1.4.1.994.3.4.7.5.1.5DescriptionStringread-writecurrent
pRemoteSensorDesc2
OBJECT-TYPE
The description for values between threshold 2 and threshold 3.
1.3.6.1.4.1.994.3.4.7.5.1.6DescriptionStringread-writecurrent
pRemoteSensorDesc3
OBJECT-TYPE
The description for values between threshold 3 and threshold 4.
1.3.6.1.4.1.994.3.4.7.5.1.7DescriptionStringread-writecurrent
pRemoteSensorDesc4
OBJECT-TYPE
The description for values between threshold 4 and threshold 5.
1.3.6.1.4.1.994.3.4.7.5.1.8DescriptionStringread-writecurrent
pRemoteSensorDesc5
OBJECT-TYPE
Description for a communications failure to the remote analog device.
1.3.6.1.4.1.994.3.4.7.5.1.9DescriptionStringread-writecurrent
pRemoteSensorConfigured
OBJECT-TYPE
If set to true analog values will be monitored. If set to false no values will be monitored.
1.3.6.1.4.1.994.3.4.7.5.1.10Configuredread-writecurrent
pRemoteSensorSendEmail
OBJECT-TYPE
If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent.
1.3.6.1.4.1.994.3.4.7.5.1.11Booleanread-writecurrent
pRemoteSensorSendSNMPTrap
OBJECT-TYPE
If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent.
1.3.6.1.4.1.994.3.4.7.5.1.12Booleanread-writecurrent
pRemoteSensorLevel0
OBJECT-TYPE
The level for values between threshold 0 and threshold 1.
1.3.6.1.4.1.994.3.4.7.5.1.17Levelread-writecurrent
pRemoteSensorLevel1
OBJECT-TYPE
The level for values between threshold 1 and threshold 2.
1.3.6.1.4.1.994.3.4.7.5.1.18Levelread-writecurrent
pRemoteSensorLevel2
OBJECT-TYPE
The level for values between threshold 2 and threshold 3.
1.3.6.1.4.1.994.3.4.7.5.1.19Levelread-writecurrent
pRemoteSensorLevel3
OBJECT-TYPE
The level for values between threshold 3 and threshold 4.
1.3.6.1.4.1.994.3.4.7.5.1.20Levelread-writecurrent
pRemoteSensorLevel4
OBJECT-TYPE
The level for values between threshold 4 and threshold 5.
1.3.6.1.4.1.994.3.4.7.5.1.21Levelread-writecurrent
pRemoteSensorLevel5
OBJECT-TYPE
Level of a communications failure to the remote analog device.
1.3.6.1.4.1.994.3.4.7.5.1.22Levelread-writecurrent
pRemoteSensorThresh0
OBJECT-TYPE
This is the maximum analog value.
1.3.6.1.4.1.994.3.4.7.5.1.28DescriptionStringread-writecurrent
pRemoteSensorThresh1
OBJECT-TYPE
This is the first threshold value.
1.3.6.1.4.1.994.3.4.7.5.1.29DescriptionStringread-writecurrent
pRemoteSensorThresh2
OBJECT-TYPE
This is the second threshold value.
1.3.6.1.4.1.994.3.4.7.5.1.30DescriptionStringread-writecurrent
pRemoteSensorThresh3
OBJECT-TYPE
This is the third threshold value.
1.3.6.1.4.1.994.3.4.7.5.1.31DescriptionStringread-writecurrent
pRemoteSensorThresh4
OBJECT-TYPE
This is the fourth threshold value.
1.3.6.1.4.1.994.3.4.7.5.1.32DescriptionStringread-writecurrent
pRemoteSensorThresh5
OBJECT-TYPE
This is the minimum threshold value.
1.3.6.1.4.1.994.3.4.7.5.1.33DescriptionStringread-writecurrent
pRemoteSensorUnits
OBJECT-TYPE
Description of the units of measurement.
1.3.6.1.4.1.994.3.4.7.5.1.46DescriptionStringread-writecurrent
pRemoteSensorPollAddress
OBJECT-TYPE
The polling address of the analog device.
1.3.6.1.4.1.994.3.4.7.5.1.56Integer32read-writecurrent
pRemoteSensorLiveDescription
OBJECT-TYPE
The description of the current state of the analog device
1.3.6.1.4.1.994.3.4.7.5.1.64DescriptionStringread-onlycurrent
pRemoteSensorLiveLevel
OBJECT-TYPE
The level of the current state of the analog device.
1.3.6.1.4.1.994.3.4.7.5.1.65DescriptionStringread-onlycurrent
pRemoteSensorLiveRaw
OBJECT-TYPE
The current reading from the analog device. This value will always be between the threshold 0 and threshold 5 values.
1.3.6.1.4.1.994.3.4.7.5.1.66DescriptionStringread-onlycurrent
pRemoteSensorLiveTime
OBJECT-TYPE
The time of the last event.
1.3.6.1.4.1.994.3.4.7.5.1.67DescriptionStringread-onlycurrent
pRemoteSensorTL1SID
OBJECT-TYPE
(TL1) System ID associated with this item.
1.3.6.1.4.1.994.3.4.7.5.1.116DescriptionStringread-writecurrent
pRemoteSensorTL1COND
OBJECT-TYPE
(TL1) Condition text associated with this item.
1.3.6.1.4.1.994.3.4.7.5.1.117DescriptionStringread-writecurrent
pRemoteSensorTL1Eqpt
OBJECT-TYPE
(TL1) EQPT field associated with this item.
1.3.6.1.4.1.994.3.4.7.5.1.118DescriptionStringread-writecurrent
pRemoteSensorTL1Env
OBJECT-TYPE
(TL1) Environmental field associated with this item.
1.3.6.1.4.1.994.3.4.7.5.1.119Booleanread-writecurrent
pRemoteSensorTL1Srveff
OBJECT-TYPE
(TL1) Service Effecting field associated with this item.
1.3.6.1.4.1.994.3.4.7.5.1.120TL1Srveffread-writecurrent
pRemoteSensorTL1Locn
OBJECT-TYPE
(TL1) Location field associated with this item.
1.3.6.1.4.1.994.3.4.7.5.1.121TL1Locnread-writecurrent
pRemoteSensorTL1Dirn
OBJECT-TYPE
(TL1) Direction field associated with this item.
1.3.6.1.4.1.994.3.4.7.5.1.122TL1Dirnread-writecurrent
pRemoteSensorMODBUSCommand
OBJECT-TYPE
The polling command for the analog device.
1.3.6.1.4.1.994.3.4.7.5.1.144MODBUSCommandread-writecurrent
pRemoteSensorStartRegister
OBJECT-TYPE
The MODBUS register for the analog device.
1.3.6.1.4.1.994.3.4.7.5.1.145Integer32read-writecurrent
pRemoteSensorIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.5.1.999Integer32 (1..32)read-onlycurrent
pOnboardSensorTable
OBJECT-TYPE
Table for configuration of OnboardSensor
1.3.6.1.4.1.994.3.4.7.6not-accessiblecurrent
pOnboardSensorEntry
OBJECT-TYPE
Entry for configuration table of OnboardSensor
1.3.6.1.4.1.994.3.4.7.6.1not-accessiblecurrent
pOnboardSensorDescription
OBJECT-TYPE
Description of the onboard sensor input.
1.3.6.1.4.1.994.3.4.7.6.1.3DescriptionStringread-onlycurrent
pOnboardSensorDesc0
OBJECT-TYPE
The description for values between threshold 0 and threshold 1.
1.3.6.1.4.1.994.3.4.7.6.1.4DescriptionStringread-writecurrent
pOnboardSensorDesc1
OBJECT-TYPE
The description for values between threshold 1 and threshold 2.
1.3.6.1.4.1.994.3.4.7.6.1.5DescriptionStringread-writecurrent
pOnboardSensorDesc2
OBJECT-TYPE
The description for values between threshold 2 and threshold 3.
1.3.6.1.4.1.994.3.4.7.6.1.6DescriptionStringread-writecurrent
pOnboardSensorDesc3
OBJECT-TYPE
The description for values between threshold 3 and threshold 4.
1.3.6.1.4.1.994.3.4.7.6.1.7DescriptionStringread-writecurrent
pOnboardSensorDesc4
OBJECT-TYPE
The description for values between threshold 4 and threshold 5.
1.3.6.1.4.1.994.3.4.7.6.1.8DescriptionStringread-writecurrent
pOnboardSensorDesc5
OBJECT-TYPE
Description for a communications failure to the sensor.
1.3.6.1.4.1.994.3.4.7.6.1.9DescriptionStringread-writecurrent
pOnboardSensorConfigured
OBJECT-TYPE
If set to true, the sensor input will be usable. If set to false the sensor input will be ignored.
1.3.6.1.4.1.994.3.4.7.6.1.10Configuredread-writecurrent
pOnboardSensorSendEmail
OBJECT-TYPE
If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent.
1.3.6.1.4.1.994.3.4.7.6.1.11Booleanread-writecurrent
pOnboardSensorSendSNMPTrap
OBJECT-TYPE
If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent.
1.3.6.1.4.1.994.3.4.7.6.1.12Booleanread-writecurrent
pOnboardSensorLevel0
OBJECT-TYPE
The level for values between threshold 0 and threshold 1.
1.3.6.1.4.1.994.3.4.7.6.1.17Levelread-writecurrent
pOnboardSensorLevel1
OBJECT-TYPE
The level for values between threshold 1 and threshold 2.
1.3.6.1.4.1.994.3.4.7.6.1.18Levelread-writecurrent
pOnboardSensorLevel2
OBJECT-TYPE
The level for values between threshold 2 and threshold 3.
1.3.6.1.4.1.994.3.4.7.6.1.19Levelread-writecurrent
pOnboardSensorLevel3
OBJECT-TYPE
The level for values between threshold 3 and threshold 4.
1.3.6.1.4.1.994.3.4.7.6.1.20Levelread-writecurrent
pOnboardSensorLevel4
OBJECT-TYPE
The level for values between threshold 4 and threshold 5.
1.3.6.1.4.1.994.3.4.7.6.1.21Levelread-writecurrent
pOnboardSensorLevel5
OBJECT-TYPE
Level of a communications failure to the sensor.
1.3.6.1.4.1.994.3.4.7.6.1.22Levelread-writecurrent
pOnboardSensorThresh0
OBJECT-TYPE
This is the minimun analog value.
1.3.6.1.4.1.994.3.4.7.6.1.28DescriptionStringread-onlycurrent
pOnboardSensorThresh1
OBJECT-TYPE
This is the first threshold value.
1.3.6.1.4.1.994.3.4.7.6.1.29DescriptionStringread-writecurrent
pOnboardSensorThresh2
OBJECT-TYPE
This is the second threshold value.
1.3.6.1.4.1.994.3.4.7.6.1.30DescriptionStringread-writecurrent
pOnboardSensorThresh3
OBJECT-TYPE
This is the third threshold value.
1.3.6.1.4.1.994.3.4.7.6.1.31DescriptionStringread-writecurrent
pOnboardSensorThresh4
OBJECT-TYPE
This is the fourth threshold value.
1.3.6.1.4.1.994.3.4.7.6.1.32DescriptionStringread-writecurrent
pOnboardSensorThresh5
OBJECT-TYPE
This is the maximum threshold value.
1.3.6.1.4.1.994.3.4.7.6.1.33DescriptionStringread-onlycurrent
pOnboardSensorUnits
OBJECT-TYPE
Description of the units of measurement.
1.3.6.1.4.1.994.3.4.7.6.1.46DescriptionStringread-onlycurrent
pOnboardSensorLiveDescription
OBJECT-TYPE
The description of the current state of the onboard sensor
1.3.6.1.4.1.994.3.4.7.6.1.64DescriptionStringread-onlycurrent
pOnboardSensorLiveLevel
OBJECT-TYPE
The level of the current state of the onboard sensor.
1.3.6.1.4.1.994.3.4.7.6.1.65DescriptionStringread-onlycurrent
pOnboardSensorLiveRaw
OBJECT-TYPE
The current reading from the onboard sensor. This value will always be between the threshold 0 and threshold 5 values.
1.3.6.1.4.1.994.3.4.7.6.1.66DescriptionStringread-onlycurrent
pOnboardSensorLiveTime
OBJECT-TYPE
The time of the last event.
1.3.6.1.4.1.994.3.4.7.6.1.67DescriptionStringread-onlycurrent
pOnboardSensorTL1SID
OBJECT-TYPE
(TL1) System ID associated with this item.
1.3.6.1.4.1.994.3.4.7.6.1.116DescriptionStringread-writecurrent
pOnboardSensorTL1COND
OBJECT-TYPE
(TL1) Condition text associated with this item.
1.3.6.1.4.1.994.3.4.7.6.1.117DescriptionStringread-writecurrent
pOnboardSensorTL1Eqpt
OBJECT-TYPE
(TL1) EQPT field associated with this item.
1.3.6.1.4.1.994.3.4.7.6.1.118DescriptionStringread-writecurrent
pOnboardSensorTL1Env
OBJECT-TYPE
(TL1) Environmental field associated with this item.
1.3.6.1.4.1.994.3.4.7.6.1.119Booleanread-writecurrent
pOnboardSensorTL1Srveff
OBJECT-TYPE
(TL1) Service Effecting field associated with this item.
1.3.6.1.4.1.994.3.4.7.6.1.120TL1Srveffread-writecurrent
pOnboardSensorTL1Locn
OBJECT-TYPE
(TL1) Location field associated with this item.
1.3.6.1.4.1.994.3.4.7.6.1.121TL1Locnread-writecurrent
pOnboardSensorTL1Dirn
OBJECT-TYPE
(TL1) Direction field associated with this item.
1.3.6.1.4.1.994.3.4.7.6.1.122TL1Dirnread-writecurrent
pOnboardSensorSensorType
OBJECT-TYPE
The type of sensor.
1.3.6.1.4.1.994.3.4.7.6.1.131SensorTyperead-onlycurrent
pOnboardSensorIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.6.1.999Integer32 (1..2)read-onlycurrent
pNetDevicesTable
OBJECT-TYPE
Table for configuration of NetDevices
1.3.6.1.4.1.994.3.4.7.7not-accessiblecurrent
pNetDevicesEntry
OBJECT-TYPE
Entry for configuration table of NetDevices
1.3.6.1.4.1.994.3.4.7.7.1not-accessiblecurrent
pNetDevicesDescription
OBJECT-TYPE
Description of the network device.
1.3.6.1.4.1.994.3.4.7.7.1.3DescriptionStringread-writecurrent
pNetDevicesDesc0
OBJECT-TYPE
Text description of online state.
1.3.6.1.4.1.994.3.4.7.7.1.4DescriptionStringread-writecurrent
pNetDevicesDesc1
OBJECT-TYPE
Text description of offline state.
1.3.6.1.4.1.994.3.4.7.7.1.5DescriptionStringread-writecurrent
pNetDevicesConfigured
OBJECT-TYPE
If set to true, net device will be pinged, If set to false, no action will be taken.
1.3.6.1.4.1.994.3.4.7.7.1.10Configuredread-writecurrent
pNetDevicesSendEmail
OBJECT-TYPE
If set to true, an email will be sent when a change of state is detected. If set to false, no email will be sent.
1.3.6.1.4.1.994.3.4.7.7.1.11Booleanread-writecurrent
pNetDevicesSendSNMPTrap
OBJECT-TYPE
If set to true, an SNMP trap will be sent when a change of state is detected. If set to false, no SNMP trap will be sent.
1.3.6.1.4.1.994.3.4.7.7.1.12Booleanread-writecurrent
pNetDevicesIpAddress
OBJECT-TYPE
The IP address of the net device to ping.
1.3.6.1.4.1.994.3.4.7.7.1.14IpAddressread-writecurrent
pNetDevicesLevel0
OBJECT-TYPE
Alarm level associated with the online state.
1.3.6.1.4.1.994.3.4.7.7.1.17Levelread-writecurrent
pNetDevicesLevel1
OBJECT-TYPE
Alarm level associated with the offline state.
1.3.6.1.4.1.994.3.4.7.7.1.18Levelread-writecurrent
pNetDevicesLiveDescription
OBJECT-TYPE
The description of the current state of the net device
1.3.6.1.4.1.994.3.4.7.7.1.64DescriptionStringread-onlycurrent
pNetDevicesLiveLevel
OBJECT-TYPE
The level of the current state of the net device.
1.3.6.1.4.1.994.3.4.7.7.1.65DescriptionStringread-onlycurrent
pNetDevicesLiveRaw
OBJECT-TYPE
The current reading from the net device. This value will always be between the threshold 0 and threshold 5 values.
1.3.6.1.4.1.994.3.4.7.7.1.66DescriptionStringread-onlycurrent
pNetDevicesLiveTime
OBJECT-TYPE
The time of the last event.
1.3.6.1.4.1.994.3.4.7.7.1.67DescriptionStringread-onlycurrent
pNetDevicesTL1SID
OBJECT-TYPE
(TL1) System ID associated with this item.
1.3.6.1.4.1.994.3.4.7.7.1.116DescriptionStringread-writecurrent
pNetDevicesTL1COND
OBJECT-TYPE
(TL1) Condition text associated with this item.
1.3.6.1.4.1.994.3.4.7.7.1.117DescriptionStringread-writecurrent
pNetDevicesTL1Eqpt
OBJECT-TYPE
(TL1) EQPT field associated with this item.
1.3.6.1.4.1.994.3.4.7.7.1.118DescriptionStringread-writecurrent
pNetDevicesTL1Env
OBJECT-TYPE
(TL1) Environmental field associated with this item.
1.3.6.1.4.1.994.3.4.7.7.1.119Booleanread-writecurrent
pNetDevicesTL1Srveff
OBJECT-TYPE
(TL1) Service Effecting field associated with this item.
1.3.6.1.4.1.994.3.4.7.7.1.120TL1Srveffread-writecurrent
pNetDevicesTL1Locn
OBJECT-TYPE
(TL1) Location field associated with this item.
1.3.6.1.4.1.994.3.4.7.7.1.121TL1Locnread-writecurrent
pNetDevicesTL1Dirn
OBJECT-TYPE
(TL1) Direction field associated with this item.
1.3.6.1.4.1.994.3.4.7.7.1.122TL1Dirnread-writecurrent
pNetDevicesIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.7.1.999Integer32 (1..32)read-onlycurrent
pAccountsTable
OBJECT-TYPE
Table for configuration of Accounts
1.3.6.1.4.1.994.3.4.7.9not-accessiblecurrent
pAccountsEntry
OBJECT-TYPE
Entry for configuration table of Accounts
1.3.6.1.4.1.994.3.4.7.9.1not-accessiblecurrent
pAccountsConfigured
OBJECT-TYPE
If set to true, this account can be used to login.
1.3.6.1.4.1.994.3.4.7.9.1.10Configuredread-writecurrent
pAccountsName
OBJECT-TYPE
Name associated with this account.
1.3.6.1.4.1.994.3.4.7.9.1.25DescriptionStringread-writecurrent
pAccountsEncPassword
OBJECT-TYPE
Password for this account. When reading, an encrypted version of password will be displayed. When writing, use plain text.
1.3.6.1.4.1.994.3.4.7.9.1.27DescriptionStringread-writecurrent
pAccountsUserLevel
OBJECT-TYPE
The user level for this account. One of the following masks from each group are used: No FTP access 0x0000 0 FTP read-only 0x0001 1 FTP Full access 0x0003 3 No Web access 0x0000 0 Monitor 0x0010 16 Config 0x0030 48 Config + Accounts 0x00B0 176 The masks are added together to create a permission value.
1.3.6.1.4.1.994.3.4.7.9.1.55Unsigned32read-writecurrent
pAccountsUnsecured
OBJECT-TYPE
Allow secured configuration for SNMP through this account.
1.3.6.1.4.1.994.3.4.7.9.1.77Booleanread-writecurrent
pAccountsAuthKey
OBJECT-TYPE
1.3.6.1.4.1.994.3.4.7.9.1.140DescriptionStringread-writecurrent
pAccountsPrivKey
OBJECT-TYPE
1.3.6.1.4.1.994.3.4.7.9.1.141DescriptionStringread-writecurrent
pAccountsSNMPAccess
OBJECT-TYPE
1.3.6.1.4.1.994.3.4.7.9.1.142SNMPAccessread-writecurrent
pAccountsIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.9.1.999Integer32 (1..16)read-onlycurrent
camera
OBJECT-IDENTITY
1.3.6.1.4.1.994.3.4.7.10
cameraConfigured
OBJECT-TYPE
If set to true, camera view will be used in main webpage. If set to false, camera view will not be used.
1.3.6.1.4.1.994.3.4.7.10.10Configuredread-writecurrent
cameraIpAddress
OBJECT-TYPE
IP address of the camera.
1.3.6.1.4.1.994.3.4.7.10.14IpAddressread-writecurrent
cameraCameraStyle
OBJECT-TYPE
Type of camera used.
1.3.6.1.4.1.994.3.4.7.10.43CameraStyleread-writecurrent
snmpGeneral
OBJECT-IDENTITY
1.3.6.1.4.1.994.3.4.7.12
snmpGeneralConfigured
OBJECT-TYPE
Resend standing alarms at a given interval
1.3.6.1.4.1.994.3.4.7.12.10Configuredread-writecurrent
snmpGeneralReadPeriod
OBJECT-TYPE
Period in minutes between resend of standing alarms
1.3.6.1.4.1.994.3.4.7.12.23Integer32read-writecurrent
snmpGeneralGet
OBJECT-TYPE
Get community name for SNMP.
1.3.6.1.4.1.994.3.4.7.12.39DescriptionStringread-writecurrent
snmpGeneralSet
OBJECT-TYPE
Set community name for SNMP.
1.3.6.1.4.1.994.3.4.7.12.40DescriptionStringread-writecurrent
snmpGeneralTrap
OBJECT-TYPE
Trap community name for SNMP.
1.3.6.1.4.1.994.3.4.7.12.41DescriptionStringread-writecurrent
snmpGeneralIPPortNum
OBJECT-TYPE
SNMP configuration is done on this network port.
1.3.6.1.4.1.994.3.4.7.12.73Integer32read-writecurrent
snmpGeneralEngineID
OBJECT-TYPE
SNMP v3 engine ID
1.3.6.1.4.1.994.3.4.7.12.143DescriptionStringread-onlycurrent
emailGeneral
OBJECT-IDENTITY
1.3.6.1.4.1.994.3.4.7.13
emailGeneralAddress
OBJECT-TYPE
Login name to use if logging into email server is true.
1.3.6.1.4.1.994.3.4.7.13.1DescriptionStringread-writecurrent
emailGeneralConfigured
OBJECT-TYPE
If set to true, the device will log onto the email server before sending and email event. If set to false, the device will not log onto email server.
1.3.6.1.4.1.994.3.4.7.13.10Configuredread-writecurrent
emailGeneralIpAddress
OBJECT-TYPE
IP address of email server.
1.3.6.1.4.1.994.3.4.7.13.14IpAddressread-writecurrent
emailGeneralPassword
OBJECT-TYPE
Password to use if logging into email server is true.
1.3.6.1.4.1.994.3.4.7.13.26DescriptionStringread-writecurrent
emailGeneralIPPortNum
OBJECT-TYPE
Port number address of email server.
1.3.6.1.4.1.994.3.4.7.13.73Integer32read-writecurrent
pSerialTable
OBJECT-TYPE
Table for configuration of Serial
1.3.6.1.4.1.994.3.4.7.14not-accessiblecurrent
pSerialEntry
OBJECT-TYPE
Entry for configuration table of Serial
1.3.6.1.4.1.994.3.4.7.14.1not-accessiblecurrent
pSerialDescription
OBJECT-TYPE
Description of the serial port.
1.3.6.1.4.1.994.3.4.7.14.1.3DescriptionStringread-onlycurrent
pSerialConfigured
OBJECT-TYPE
If set to true, this serial port will be usable. If set to false the port will not be usable.
1.3.6.1.4.1.994.3.4.7.14.1.10Configuredread-writecurrent
pSerialIpAddress
OBJECT-TYPE
IP Address of the target device.
1.3.6.1.4.1.994.3.4.7.14.1.14IpAddressread-writecurrent
pSerialReadPeriod
OBJECT-TYPE
Inactivity timeout (in minutes).
1.3.6.1.4.1.994.3.4.7.14.1.23Integer32read-writecurrent
pSerialBaudRate
OBJECT-TYPE
Baud rate of the serial port.
1.3.6.1.4.1.994.3.4.7.14.1.57BaudRateread-writecurrent
pSerialDataBits
OBJECT-TYPE
Number of data bit for the serial port.
1.3.6.1.4.1.994.3.4.7.14.1.58DataBitsread-writecurrent
pSerialParity
OBJECT-TYPE
Parity of the serial port.
1.3.6.1.4.1.994.3.4.7.14.1.59Parityread-writecurrent
pSerialStopBits
OBJECT-TYPE
Number of stop bits for the serial port.
1.3.6.1.4.1.994.3.4.7.14.1.60StopBitsread-writecurrent
pSerialProtocol
OBJECT-TYPE
Protocol the serial port is speaking.
1.3.6.1.4.1.994.3.4.7.14.1.61Protocolread-writecurrent
pSerialSerialRTS
OBJECT-TYPE
Request To Send (RTS) setting for the serial port.
1.3.6.1.4.1.994.3.4.7.14.1.62SerialRTSread-writecurrent
pSerialSerialCTS
OBJECT-TYPE
Clear To Send (CTS) setting for the serial port.
1.3.6.1.4.1.994.3.4.7.14.1.63SerialCTSread-writecurrent
pSerialPresent
OBJECT-TYPE
If set to true, the serial port exists. If set to false the serial port does not exist.
1.3.6.1.4.1.994.3.4.7.14.1.68Booleanread-onlycurrent
pSerialIPPortNum
OBJECT-TYPE
IP port number of the target device.
1.3.6.1.4.1.994.3.4.7.14.1.73Integer32read-writecurrent
pSerialPortType
OBJECT-TYPE
The type of serial port.
1.3.6.1.4.1.994.3.4.7.14.1.76PortTyperead-onlycurrent
pSerialIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.14.1.999Integer32 (1..5)read-onlycurrent
pSelfTestTable
OBJECT-TYPE
Table for configuration of SelfTest
1.3.6.1.4.1.994.3.4.7.15not-accessiblecurrent
pSelfTestEntry
OBJECT-TYPE
Entry for configuration table of SelfTest
1.3.6.1.4.1.994.3.4.7.15.1not-accessiblecurrent
pSelfTestDescription
OBJECT-TYPE
Description of the Power On Self Test (POST).
1.3.6.1.4.1.994.3.4.7.15.1.3DescriptionStringread-writecurrent
pSelfTestConfigured
OBJECT-TYPE
If set to true, this POST has passed. If set to false, it has failed.
1.3.6.1.4.1.994.3.4.7.15.1.10Configuredread-writecurrent
pSelfTestIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.15.1.999Integer32 (1..7)read-onlycurrent
pInternalFaultsTable
OBJECT-TYPE
Table for configuration of InternalFaults
1.3.6.1.4.1.994.3.4.7.16not-accessiblecurrent
pInternalFaultsEntry
OBJECT-TYPE
Entry for configuration table of InternalFaults
1.3.6.1.4.1.994.3.4.7.16.1not-accessiblecurrent
pInternalFaultsDescription
OBJECT-TYPE
Description of the internal fault.
1.3.6.1.4.1.994.3.4.7.16.1.3DescriptionStringread-onlycurrent
pInternalFaultsDesc0
OBJECT-TYPE
Text description of the healthy state.
1.3.6.1.4.1.994.3.4.7.16.1.4DescriptionStringread-onlycurrent
pInternalFaultsDesc1
OBJECT-TYPE
Text description of a non-normal state.
1.3.6.1.4.1.994.3.4.7.16.1.5DescriptionStringread-onlycurrent
pInternalFaultsDesc2
OBJECT-TYPE
Text description of a non-normal state.
1.3.6.1.4.1.994.3.4.7.16.1.6DescriptionStringread-onlycurrent
pInternalFaultsDesc3
OBJECT-TYPE
Text description of a non-normal state.
1.3.6.1.4.1.994.3.4.7.16.1.7DescriptionStringread-onlycurrent
pInternalFaultsSendEmail
OBJECT-TYPE
If set to true an email event will be set when a change occurs. If set to false no email event will be sent.
1.3.6.1.4.1.994.3.4.7.16.1.11Booleanread-writecurrent
pInternalFaultsSendSNMPTrap
OBJECT-TYPE
If set to true an SNMP trap will be set when a change occurs. If set to false no SNMP trap will be sent.
1.3.6.1.4.1.994.3.4.7.16.1.12Booleanread-writecurrent
pInternalFaultsLevel0
OBJECT-TYPE
Alarm level associated with the healthy state.
1.3.6.1.4.1.994.3.4.7.16.1.17Levelread-writecurrent
pInternalFaultsLevel1
OBJECT-TYPE
Alarm level associated with this non-normal state.
1.3.6.1.4.1.994.3.4.7.16.1.18Levelread-writecurrent
pInternalFaultsLevel2
OBJECT-TYPE
Alarm level associated with this non-normal state.
1.3.6.1.4.1.994.3.4.7.16.1.19Levelread-writecurrent
pInternalFaultsLevel3
OBJECT-TYPE
Alarm level associated with this non-normal state.
1.3.6.1.4.1.994.3.4.7.16.1.20Levelread-writecurrent
pInternalFaultsReadPeriod
OBJECT-TYPE
Dwell time required in milliseconds.
1.3.6.1.4.1.994.3.4.7.16.1.23Integer32read-writecurrent
pInternalFaultsIgnoreOff
OBJECT-TYPE
If true, no event is generated for a change to the healty state.
1.3.6.1.4.1.994.3.4.7.16.1.50Booleanread-writecurrent
pInternalFaultsLiveDescription
OBJECT-TYPE
The current condition of the internal fault.
1.3.6.1.4.1.994.3.4.7.16.1.64DescriptionStringread-onlycurrent
pInternalFaultsLiveLevel
OBJECT-TYPE
The current level of the internal fault.
1.3.6.1.4.1.994.3.4.7.16.1.65DescriptionStringread-onlycurrent
pInternalFaultsLiveTime
OBJECT-TYPE
The time of the fault event.
1.3.6.1.4.1.994.3.4.7.16.1.67DescriptionStringread-onlycurrent
pInternalFaultsUseResetTime
OBJECT-TYPE
When true the configured dwell time is used internally.
1.3.6.1.4.1.994.3.4.7.16.1.98Booleanread-onlycurrent
pInternalFaultsIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.16.1.999Integer32 (1..11)read-onlycurrent
pSlotInfoTable
OBJECT-TYPE
Table for configuration of SlotInfo
1.3.6.1.4.1.994.3.4.7.17not-accessiblecurrent
pSlotInfoEntry
OBJECT-TYPE
Entry for configuration table of SlotInfo
1.3.6.1.4.1.994.3.4.7.17.1not-accessiblecurrent
pSlotInfoDescription
OBJECT-TYPE
Description of the slot contents.
1.3.6.1.4.1.994.3.4.7.17.1.3DescriptionStringread-onlycurrent
pSlotInfoRecord
OBJECT-TYPE
The number of records for this slot.
1.3.6.1.4.1.994.3.4.7.17.1.35Integer32read-onlycurrent
pSlotInfoPresent
OBJECT-TYPE
If true indicates a card is in the slot. If false indicates that no card is present in the slot.
1.3.6.1.4.1.994.3.4.7.17.1.68Booleanread-onlycurrent
pSlotInfoSlotId
OBJECT-TYPE
Identifies the type of card in slot.
1.3.6.1.4.1.994.3.4.7.17.1.69SlotIdread-onlycurrent
pSlotInfoIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.17.1.999Integer32 (1..6)read-onlycurrent
pSlot1Table
OBJECT-TYPE
Table for configuration of Slot1
1.3.6.1.4.1.994.3.4.7.18not-accessiblecurrent
pSlot1Entry
OBJECT-TYPE
Entry for configuration table of Slot1
1.3.6.1.4.1.994.3.4.7.18.1not-accessiblecurrent
pSlot1Description
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Description of the alarm point. discrete-outputs - Description of the control point. serial-ports - Description of the serial port. onboard-sensors - Description of the onboard device. analog-Inputs - Description of the analog input device. analog-Sensors - Description of the sensor input device.
1.3.6.1.4.1.994.3.4.7.18.1.3DescriptionStringread-writecurrent
pSlot1Desc0
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Description of the off state. discrete-outputs - Description when the control point is open. onboard-sensors - The description for values between threshold 0 and threshold 1. analog-Inputs - The description for values between threshold 0 and threshold 1. analog-Sensors - The description for values between threshold 0 and threshold 1.
1.3.6.1.4.1.994.3.4.7.18.1.4DescriptionStringread-writecurrent
pSlot1Desc1
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Description of the on state. discrete-outputs - Description when the control point is closed. onboard-sensors - The description for values between threshold 1 and threshold 2. analog-Inputs - The description for values between threshold 1 and threshold 2. analog-Sensors - The description for values between threshold 1 and threshold 2.
1.3.6.1.4.1.994.3.4.7.18.1.5DescriptionStringread-writecurrent
pSlot1Desc2
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The description for values between threshold 2 and threshold 3. analog-Inputs - The description for values between threshold 2 and threshold 3. analog-Sensors - The description for values between threshold 2 and threshold 3.
1.3.6.1.4.1.994.3.4.7.18.1.6DescriptionStringread-writecurrent
pSlot1Desc3
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The description for values between threshold 3 and threshold 4. analog-Inputs - The description for values between threshold 3 and threshold 4. analog-Sensors - The description for values between threshold 3 and threshold 4.
1.3.6.1.4.1.994.3.4.7.18.1.7DescriptionStringread-writecurrent
pSlot1Desc4
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The description for values between threshold 4 and threshold 5. analog-Inputs - The description for values between threshold 4 and threshold 5. analog-Sensors - The description for values between threshold 4 and threshold 5.
1.3.6.1.4.1.994.3.4.7.18.1.8DescriptionStringread-writecurrent
pSlot1Desc5
OBJECT-TYPE
This field is used in the following card types: analog-Inputs - Description for a communications failure to the sensor. analog-Sensors - Description for a communications failure to the sensor.
1.3.6.1.4.1.994.3.4.7.18.1.9DescriptionStringread-writecurrent
pSlot1Configured
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - If set to true, changes of state will be reported. If set to false, not change of states will be reported. discrete-outputs - If set to true, the control point will operate. If false, it will not operate. serial-ports - If set to true, this serial port will be usable. If set to false the port will not be usable. onboard-sensors - If set to true, the onboard sensors will be used. If set to false the will be ignored. analog-Inputs - If set to true, the analog inputs will be usable. If set to false the analog inputs will be ignored. analog-Sensors - If set to true, the sensor inputs will be usable. If set to false the sensor inputs will be ignored.
1.3.6.1.4.1.994.3.4.7.18.1.10Configuredread-writecurrent
pSlot1SendEmail
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - If set to true, an email will be sent on a change of state. If false, no email will be sent. onboard-sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Inputs - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent.
1.3.6.1.4.1.994.3.4.7.18.1.11Booleanread-writecurrent
pSlot1SendSNMPTrap
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - If set to true, an SNMP trap will be sent on a change of state. If false, no SNMP trap will be sent. onboard-sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Inputs - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent.
1.3.6.1.4.1.994.3.4.7.18.1.12Booleanread-writecurrent
pSlot1IpAddress
OBJECT-TYPE
This field is used in the following card types: serial-ports - IP Address of the target device.
1.3.6.1.4.1.994.3.4.7.18.1.14IpAddressread-writecurrent
pSlot1Level0
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Level of the off state. discrete-outputs - Level of the control point when open. onboard-sensors - The level for values between threshold 0 and threshold 1. analog-Inputs - The level for values between threshold 0 and threshold 1. analog-Sensors - The level for values between threshold 0 and threshold 1.
1.3.6.1.4.1.994.3.4.7.18.1.17Levelread-writecurrent
pSlot1Level1
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Level of the on state. discrete-outputs - Level of the control point when closed. onboard-sensors - The level for values between threshold 1 and threshold 2. analog-Inputs - The level for values between threshold 1 and threshold 2. analog-Sensors - The level for values between threshold 1 and threshold 2.
1.3.6.1.4.1.994.3.4.7.18.1.18Levelread-writecurrent
pSlot1Level2
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The level for values between threshold 2 and threshold 3. analog-Inputs - The level for values between threshold 2 and threshold 3. analog-Sensors - The level for values between threshold 2 and threshold 3.
1.3.6.1.4.1.994.3.4.7.18.1.19Levelread-writecurrent
pSlot1Level3
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The level for values between threshold 3 and threshold 4. analog-Inputs - The level for values between threshold 3 and threshold 4. analog-Sensors - The level for values between threshold 3 and threshold 4.
1.3.6.1.4.1.994.3.4.7.18.1.20Levelread-writecurrent
pSlot1Level4
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The level for values between threshold 4 and threshold 5. analog-Inputs - The level for values between threshold 4 and threshold 5. analog-Sensors - The level for values between threshold 4 and threshold 5.
1.3.6.1.4.1.994.3.4.7.18.1.21Levelread-writecurrent
pSlot1Level5
OBJECT-TYPE
This field is used in the following card types: analog-Inputs - Level of a communications failure to the sensor. analog-Sensors - Level of a communications failure to the sensor.
1.3.6.1.4.1.994.3.4.7.18.1.22Levelread-writecurrent
pSlot1ReadPeriod
OBJECT-TYPE
This field is used in the following card types: serial-ports - Inactivity timeout (in minutes).
1.3.6.1.4.1.994.3.4.7.18.1.23Integer32read-writecurrent
pSlot1Thresh0
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the minimun analog value. analog-Inputs - This is the maximum analog value. analog-Sensors - This is the maximum analog value.
1.3.6.1.4.1.994.3.4.7.18.1.28DescriptionStringread-onlycurrent
pSlot1Thresh1
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the first threshold value. analog-Inputs - This is the first threshold value. analog-Sensors - This is the first threshold value.
1.3.6.1.4.1.994.3.4.7.18.1.29DescriptionStringread-writecurrent
pSlot1Thresh2
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the second threshold value. analog-Inputs - This is the second threshold value. analog-Sensors - This is the second threshold value.
1.3.6.1.4.1.994.3.4.7.18.1.30DescriptionStringread-writecurrent
pSlot1Thresh3
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the third threshold value. analog-Inputs - This is the third threshold value. analog-Sensors - This is the third threshold value.
1.3.6.1.4.1.994.3.4.7.18.1.31DescriptionStringread-writecurrent
pSlot1Thresh4
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the fourth threshold value. analog-Inputs - This is the fourth threshold value. analog-Sensors - This is the fourth threshold value.
1.3.6.1.4.1.994.3.4.7.18.1.32DescriptionStringread-writecurrent
pSlot1Thresh5
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the maximum threshold value. analog-Inputs - This is the minimum threshold value. analog-Sensors - This is the minimum threshold value.
1.3.6.1.4.1.994.3.4.7.18.1.33DescriptionStringread-onlycurrent
pSlot1ContactStyle
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Determines the type of contact.
1.3.6.1.4.1.994.3.4.7.18.1.44ContactStyleread-writecurrent
pSlot1Units
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - Description of the units of measurement. analog-Inputs - Description of the units of measurement. analog-Sensors - Description of the units of measurement.
1.3.6.1.4.1.994.3.4.7.18.1.46DescriptionStringread-onlycurrent
pSlot1OutputMode
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - Defines the different ways a control point can be activated.
1.3.6.1.4.1.994.3.4.7.18.1.47OutputModeread-writecurrent
pSlot1OutputState
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - A value of 0 will open the control point. A value of 1 will close the control point.
1.3.6.1.4.1.994.3.4.7.18.1.48OutputStateread-writecurrent
pSlot1OutputAuto
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - When this control point is opened, this alarm point will change state to the on state.
1.3.6.1.4.1.994.3.4.7.18.1.49Integer32read-writecurrent
pSlot1BaudRate
OBJECT-TYPE
This field is used in the following card types: serial-ports - Baud rate of the serial port.
1.3.6.1.4.1.994.3.4.7.18.1.57BaudRateread-writecurrent
pSlot1DataBits
OBJECT-TYPE
This field is used in the following card types: serial-ports - Number of data bit for the serial port.
1.3.6.1.4.1.994.3.4.7.18.1.58DataBitsread-writecurrent
pSlot1Parity
OBJECT-TYPE
This field is used in the following card types: serial-ports - Parity of the serial port.
1.3.6.1.4.1.994.3.4.7.18.1.59Parityread-writecurrent
pSlot1StopBits
OBJECT-TYPE
This field is used in the following card types: serial-ports - Number of stop bits for the serial port.
1.3.6.1.4.1.994.3.4.7.18.1.60StopBitsread-writecurrent
pSlot1Protocol
OBJECT-TYPE
This field is used in the following card types: serial-ports - Protocol the serial port is speaking.
1.3.6.1.4.1.994.3.4.7.18.1.61Protocolread-writecurrent
pSlot1SerialRTS
OBJECT-TYPE
This field is used in the following card types: serial-ports - Request To Send (RTS) setting for the serial port.
1.3.6.1.4.1.994.3.4.7.18.1.62SerialRTSread-writecurrent
pSlot1SerialCTS
OBJECT-TYPE
This field is used in the following card types: serial-ports - Clear To Send (CTS) setting for the serial port.
1.3.6.1.4.1.994.3.4.7.18.1.63SerialCTSread-writecurrent
pSlot1LiveDescription
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The current description of the alarm state. onboard-sensors - The description of the current state of the onboard sensor analog-Inputs - The description of the current state of the analog input. analog-Sensors - The description of the current state of the sensor input.
1.3.6.1.4.1.994.3.4.7.18.1.64DescriptionStringread-onlycurrent
pSlot1LiveLevel
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The current level of the alarm. onboard-sensors - The level of the current state of the onboard sensor. analog-Inputs - The level of the current state of the analog input. analog-Sensors - The level of the current state of the sensor input.
1.3.6.1.4.1.994.3.4.7.18.1.65DescriptionStringread-onlycurrent
pSlot1LiveRaw
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The current reading from the onboard sensor. This value will always be between the threshold 0 and threshold 5 values. analog-Inputs - The current reading from the analog input. This value will always be between the threshold 0 and threshold 5 values. analog-Sensors - The current reading from the sensor input. This value will always be between the threshold 0 and threshold 5 values.
1.3.6.1.4.1.994.3.4.7.18.1.66DescriptionStringread-onlycurrent
pSlot1LiveTime
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The time of the last change of state. onboard-sensors - The time of the last event. analog-Inputs - The time of the last event. analog-Sensors - The time of the last event.
1.3.6.1.4.1.994.3.4.7.18.1.67DescriptionStringread-onlycurrent
pSlot1Present
OBJECT-TYPE
This field is used in the following card types: serial-ports - If set to true, the serial port exists. If set to false the serial port does not exist.
1.3.6.1.4.1.994.3.4.7.18.1.68Booleanread-onlycurrent
pSlot1OutputAutoPkg
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - When this control point is opened, this is the package that the alarm point is located.
1.3.6.1.4.1.994.3.4.7.18.1.71Integer32read-writecurrent
pSlot1VoltageRange
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The voltage range. analog-Inputs - The voltage range. analog-Sensors - The voltage range.
1.3.6.1.4.1.994.3.4.7.18.1.72VoltageRangeread-onlycurrent
pSlot1IPPortNum
OBJECT-TYPE
This field is used in the following card types: serial-ports - IP port number of the target device.
1.3.6.1.4.1.994.3.4.7.18.1.73Integer32read-writecurrent
pSlot1IOFormat
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The io format of discrete inputs. discrete-outputs - The io format of discrete outputs. serial-ports - The io format of serial ports. onboard-sensors - The io format of onboard sensors. analog-Inputs - The io format of analog inputs. analog-Sensors - The io format of analog sensors.
1.3.6.1.4.1.994.3.4.7.18.1.75IOFormatread-onlycurrent
pSlot1PortType
OBJECT-TYPE
This field is used in the following card types: serial-ports - The type of serial port.
1.3.6.1.4.1.994.3.4.7.18.1.76PortTyperead-onlycurrent
pSlot1TL1SID
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.18.1.116DescriptionStringread-writecurrent
pSlot1TL1COND
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.18.1.117DescriptionStringread-writecurrent
pSlot1TL1Eqpt
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.18.1.118DescriptionStringread-writecurrent
pSlot1TL1Env
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.18.1.119Booleanread-writecurrent
pSlot1TL1Srveff
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.18.1.120TL1Srveffread-writecurrent
pSlot1TL1Locn
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.18.1.121TL1Locnread-writecurrent
pSlot1TL1Dirn
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.18.1.122TL1Dirnread-writecurrent
pSlot1SensorType
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The type of sensor. analog-Inputs - The type of sensor. analog-Sensors - The type of sensor.
1.3.6.1.4.1.994.3.4.7.18.1.131SensorTyperead-onlycurrent
pSlot1Index
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.18.1.999Integer32 (1..32)read-onlycurrent
pSlot2Table
OBJECT-TYPE
Table for configuration of Slot2
1.3.6.1.4.1.994.3.4.7.19not-accessiblecurrent
pSlot2Entry
OBJECT-TYPE
Entry for configuration table of Slot2
1.3.6.1.4.1.994.3.4.7.19.1not-accessiblecurrent
pSlot2Description
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Description of the alarm point. discrete-outputs - Description of the control point. serial-ports - Description of the serial port. onboard-sensors - Description of the onboard device. analog-Inputs - Description of the analog input device. analog-Sensors - Description of the sensor input device.
1.3.6.1.4.1.994.3.4.7.19.1.3DescriptionStringread-writecurrent
pSlot2Desc0
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Description of the off state. discrete-outputs - Description when the control point is open. onboard-sensors - The description for values between threshold 0 and threshold 1. analog-Inputs - The description for values between threshold 0 and threshold 1. analog-Sensors - The description for values between threshold 0 and threshold 1.
1.3.6.1.4.1.994.3.4.7.19.1.4DescriptionStringread-writecurrent
pSlot2Desc1
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Description of the on state. discrete-outputs - Description when the control point is closed. onboard-sensors - The description for values between threshold 1 and threshold 2. analog-Inputs - The description for values between threshold 1 and threshold 2. analog-Sensors - The description for values between threshold 1 and threshold 2.
1.3.6.1.4.1.994.3.4.7.19.1.5DescriptionStringread-writecurrent
pSlot2Desc2
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The description for values between threshold 2 and threshold 3. analog-Inputs - The description for values between threshold 2 and threshold 3. analog-Sensors - The description for values between threshold 2 and threshold 3.
1.3.6.1.4.1.994.3.4.7.19.1.6DescriptionStringread-writecurrent
pSlot2Desc3
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The description for values between threshold 3 and threshold 4. analog-Inputs - The description for values between threshold 3 and threshold 4. analog-Sensors - The description for values between threshold 3 and threshold 4.
1.3.6.1.4.1.994.3.4.7.19.1.7DescriptionStringread-writecurrent
pSlot2Desc4
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The description for values between threshold 4 and threshold 5. analog-Inputs - The description for values between threshold 4 and threshold 5. analog-Sensors - The description for values between threshold 4 and threshold 5.
1.3.6.1.4.1.994.3.4.7.19.1.8DescriptionStringread-writecurrent
pSlot2Desc5
OBJECT-TYPE
This field is used in the following card types: analog-Inputs - Description for a communications failure to the sensor. analog-Sensors - Description for a communications failure to the sensor.
1.3.6.1.4.1.994.3.4.7.19.1.9DescriptionStringread-writecurrent
pSlot2Configured
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - If set to true, changes of state will be reported. If set to false, not change of states will be reported. discrete-outputs - If set to true, the control point will operate. If false, it will not operate. serial-ports - If set to true, this serial port will be usable. If set to false the port will not be usable. onboard-sensors - If set to true, the onboard sensors will be used. If set to false the will be ignored. analog-Inputs - If set to true, the analog inputs will be usable. If set to false the analog inputs will be ignored. analog-Sensors - If set to true, the sensor inputs will be usable. If set to false the sensor inputs will be ignored.
1.3.6.1.4.1.994.3.4.7.19.1.10Configuredread-writecurrent
pSlot2SendEmail
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - If set to true, an email will be sent on a change of state. If false, no email will be sent. onboard-sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Inputs - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent.
1.3.6.1.4.1.994.3.4.7.19.1.11Booleanread-writecurrent
pSlot2SendSNMPTrap
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - If set to true, an SNMP trap will be sent on a change of state. If false, no SNMP trap will be sent. onboard-sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Inputs - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent.
1.3.6.1.4.1.994.3.4.7.19.1.12Booleanread-writecurrent
pSlot2IpAddress
OBJECT-TYPE
This field is used in the following card types: serial-ports - IP Address of the target device.
1.3.6.1.4.1.994.3.4.7.19.1.14IpAddressread-writecurrent
pSlot2Level0
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Level of the off state. discrete-outputs - Level of the control point when open. onboard-sensors - The level for values between threshold 0 and threshold 1. analog-Inputs - The level for values between threshold 0 and threshold 1. analog-Sensors - The level for values between threshold 0 and threshold 1.
1.3.6.1.4.1.994.3.4.7.19.1.17Levelread-writecurrent
pSlot2Level1
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Level of the on state. discrete-outputs - Level of the control point when closed. onboard-sensors - The level for values between threshold 1 and threshold 2. analog-Inputs - The level for values between threshold 1 and threshold 2. analog-Sensors - The level for values between threshold 1 and threshold 2.
1.3.6.1.4.1.994.3.4.7.19.1.18Levelread-writecurrent
pSlot2Level2
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The level for values between threshold 2 and threshold 3. analog-Inputs - The level for values between threshold 2 and threshold 3. analog-Sensors - The level for values between threshold 2 and threshold 3.
1.3.6.1.4.1.994.3.4.7.19.1.19Levelread-writecurrent
pSlot2Level3
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The level for values between threshold 3 and threshold 4. analog-Inputs - The level for values between threshold 3 and threshold 4. analog-Sensors - The level for values between threshold 3 and threshold 4.
1.3.6.1.4.1.994.3.4.7.19.1.20Levelread-writecurrent
pSlot2Level4
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The level for values between threshold 4 and threshold 5. analog-Inputs - The level for values between threshold 4 and threshold 5. analog-Sensors - The level for values between threshold 4 and threshold 5.
1.3.6.1.4.1.994.3.4.7.19.1.21Levelread-writecurrent
pSlot2Level5
OBJECT-TYPE
This field is used in the following card types: analog-Inputs - Level of a communications failure to the sensor. analog-Sensors - Level of a communications failure to the sensor.
1.3.6.1.4.1.994.3.4.7.19.1.22Levelread-writecurrent
pSlot2ReadPeriod
OBJECT-TYPE
This field is used in the following card types: serial-ports - Inactivity timeout (in minutes).
1.3.6.1.4.1.994.3.4.7.19.1.23Integer32read-writecurrent
pSlot2Thresh0
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the minimun analog value. analog-Inputs - This is the maximum analog value. analog-Sensors - This is the maximum analog value.
1.3.6.1.4.1.994.3.4.7.19.1.28DescriptionStringread-onlycurrent
pSlot2Thresh1
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the first threshold value. analog-Inputs - This is the first threshold value. analog-Sensors - This is the first threshold value.
1.3.6.1.4.1.994.3.4.7.19.1.29DescriptionStringread-writecurrent
pSlot2Thresh2
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the second threshold value. analog-Inputs - This is the second threshold value. analog-Sensors - This is the second threshold value.
1.3.6.1.4.1.994.3.4.7.19.1.30DescriptionStringread-writecurrent
pSlot2Thresh3
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the third threshold value. analog-Inputs - This is the third threshold value. analog-Sensors - This is the third threshold value.
1.3.6.1.4.1.994.3.4.7.19.1.31DescriptionStringread-writecurrent
pSlot2Thresh4
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the fourth threshold value. analog-Inputs - This is the fourth threshold value. analog-Sensors - This is the fourth threshold value.
1.3.6.1.4.1.994.3.4.7.19.1.32DescriptionStringread-writecurrent
pSlot2Thresh5
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the maximum threshold value. analog-Inputs - This is the minimum threshold value. analog-Sensors - This is the minimum threshold value.
1.3.6.1.4.1.994.3.4.7.19.1.33DescriptionStringread-onlycurrent
pSlot2ContactStyle
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Determines the type of contact.
1.3.6.1.4.1.994.3.4.7.19.1.44ContactStyleread-writecurrent
pSlot2Units
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - Description of the units of measurement. analog-Inputs - Description of the units of measurement. analog-Sensors - Description of the units of measurement.
1.3.6.1.4.1.994.3.4.7.19.1.46DescriptionStringread-onlycurrent
pSlot2OutputMode
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - Defines the different ways a control point can be activated.
1.3.6.1.4.1.994.3.4.7.19.1.47OutputModeread-writecurrent
pSlot2OutputState
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - A value of 0 will open the control point. A value of 1 will close the control point.
1.3.6.1.4.1.994.3.4.7.19.1.48OutputStateread-writecurrent
pSlot2OutputAuto
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - When this control point is opened, this alarm point will change state to the on state.
1.3.6.1.4.1.994.3.4.7.19.1.49Integer32read-writecurrent
pSlot2BaudRate
OBJECT-TYPE
This field is used in the following card types: serial-ports - Baud rate of the serial port.
1.3.6.1.4.1.994.3.4.7.19.1.57BaudRateread-writecurrent
pSlot2DataBits
OBJECT-TYPE
This field is used in the following card types: serial-ports - Number of data bit for the serial port.
1.3.6.1.4.1.994.3.4.7.19.1.58DataBitsread-writecurrent
pSlot2Parity
OBJECT-TYPE
This field is used in the following card types: serial-ports - Parity of the serial port.
1.3.6.1.4.1.994.3.4.7.19.1.59Parityread-writecurrent
pSlot2StopBits
OBJECT-TYPE
This field is used in the following card types: serial-ports - Number of stop bits for the serial port.
1.3.6.1.4.1.994.3.4.7.19.1.60StopBitsread-writecurrent
pSlot2Protocol
OBJECT-TYPE
This field is used in the following card types: serial-ports - Protocol the serial port is speaking.
1.3.6.1.4.1.994.3.4.7.19.1.61Protocolread-writecurrent
pSlot2SerialRTS
OBJECT-TYPE
This field is used in the following card types: serial-ports - Request To Send (RTS) setting for the serial port.
1.3.6.1.4.1.994.3.4.7.19.1.62SerialRTSread-writecurrent
pSlot2SerialCTS
OBJECT-TYPE
This field is used in the following card types: serial-ports - Clear To Send (CTS) setting for the serial port.
1.3.6.1.4.1.994.3.4.7.19.1.63SerialCTSread-writecurrent
pSlot2LiveDescription
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The current description of the alarm state. onboard-sensors - The description of the current state of the onboard sensor analog-Inputs - The description of the current state of the analog input. analog-Sensors - The description of the current state of the sensor input.
1.3.6.1.4.1.994.3.4.7.19.1.64DescriptionStringread-onlycurrent
pSlot2LiveLevel
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The current level of the alarm. onboard-sensors - The level of the current state of the onboard sensor. analog-Inputs - The level of the current state of the analog input. analog-Sensors - The level of the current state of the sensor input.
1.3.6.1.4.1.994.3.4.7.19.1.65DescriptionStringread-onlycurrent
pSlot2LiveRaw
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The current reading from the onboard sensor. This value will always be between the threshold 0 and threshold 5 values. analog-Inputs - The current reading from the analog input. This value will always be between the threshold 0 and threshold 5 values. analog-Sensors - The current reading from the sensor input. This value will always be between the threshold 0 and threshold 5 values.
1.3.6.1.4.1.994.3.4.7.19.1.66DescriptionStringread-onlycurrent
pSlot2LiveTime
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The time of the last change of state. onboard-sensors - The time of the last event. analog-Inputs - The time of the last event. analog-Sensors - The time of the last event.
1.3.6.1.4.1.994.3.4.7.19.1.67DescriptionStringread-onlycurrent
pSlot2Present
OBJECT-TYPE
This field is used in the following card types: serial-ports - If set to true, the serial port exists. If set to false the serial port does not exist.
1.3.6.1.4.1.994.3.4.7.19.1.68Booleanread-onlycurrent
pSlot2OutputAutoPkg
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - When this control point is opened, this is the package that the alarm point is located.
1.3.6.1.4.1.994.3.4.7.19.1.71Integer32read-writecurrent
pSlot2VoltageRange
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The voltage range. analog-Inputs - The voltage range. analog-Sensors - The voltage range.
1.3.6.1.4.1.994.3.4.7.19.1.72VoltageRangeread-onlycurrent
pSlot2IPPortNum
OBJECT-TYPE
This field is used in the following card types: serial-ports - IP port number of the target device.
1.3.6.1.4.1.994.3.4.7.19.1.73Integer32read-writecurrent
pSlot2IOFormat
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The io format of discrete inputs. discrete-outputs - The io format of discrete outputs. serial-ports - The io format of serial ports. onboard-sensors - The io format of onboard sensors. analog-Inputs - The io format of analog inputs. analog-Sensors - The io format of analog sensors.
1.3.6.1.4.1.994.3.4.7.19.1.75IOFormatread-onlycurrent
pSlot2PortType
OBJECT-TYPE
This field is used in the following card types: serial-ports - The type of serial port.
1.3.6.1.4.1.994.3.4.7.19.1.76PortTyperead-onlycurrent
pSlot2TL1SID
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.19.1.116DescriptionStringread-writecurrent
pSlot2TL1COND
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.19.1.117DescriptionStringread-writecurrent
pSlot2TL1Eqpt
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.19.1.118DescriptionStringread-writecurrent
pSlot2TL1Env
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.19.1.119Booleanread-writecurrent
pSlot2TL1Srveff
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.19.1.120TL1Srveffread-writecurrent
pSlot2TL1Locn
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.19.1.121TL1Locnread-writecurrent
pSlot2TL1Dirn
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.19.1.122TL1Dirnread-writecurrent
pSlot2SensorType
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The type of sensor. analog-Inputs - The type of sensor. analog-Sensors - The type of sensor.
1.3.6.1.4.1.994.3.4.7.19.1.131SensorTyperead-onlycurrent
pSlot2Index
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.19.1.999Integer32 (1..32)read-onlycurrent
pSlot3Table
OBJECT-TYPE
Table for configuration of Slot3
1.3.6.1.4.1.994.3.4.7.20not-accessiblecurrent
pSlot3Entry
OBJECT-TYPE
Entry for configuration table of Slot3
1.3.6.1.4.1.994.3.4.7.20.1not-accessiblecurrent
pSlot3Description
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Description of the alarm point. discrete-outputs - Description of the control point. serial-ports - Description of the serial port. onboard-sensors - Description of the onboard device. analog-Inputs - Description of the analog input device. analog-Sensors - Description of the sensor input device.
1.3.6.1.4.1.994.3.4.7.20.1.3DescriptionStringread-writecurrent
pSlot3Desc0
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Description of the off state. discrete-outputs - Description when the control point is open. onboard-sensors - The description for values between threshold 0 and threshold 1. analog-Inputs - The description for values between threshold 0 and threshold 1. analog-Sensors - The description for values between threshold 0 and threshold 1.
1.3.6.1.4.1.994.3.4.7.20.1.4DescriptionStringread-writecurrent
pSlot3Desc1
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Description of the on state. discrete-outputs - Description when the control point is closed. onboard-sensors - The description for values between threshold 1 and threshold 2. analog-Inputs - The description for values between threshold 1 and threshold 2. analog-Sensors - The description for values between threshold 1 and threshold 2.
1.3.6.1.4.1.994.3.4.7.20.1.5DescriptionStringread-writecurrent
pSlot3Desc2
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The description for values between threshold 2 and threshold 3. analog-Inputs - The description for values between threshold 2 and threshold 3. analog-Sensors - The description for values between threshold 2 and threshold 3.
1.3.6.1.4.1.994.3.4.7.20.1.6DescriptionStringread-writecurrent
pSlot3Desc3
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The description for values between threshold 3 and threshold 4. analog-Inputs - The description for values between threshold 3 and threshold 4. analog-Sensors - The description for values between threshold 3 and threshold 4.
1.3.6.1.4.1.994.3.4.7.20.1.7DescriptionStringread-writecurrent
pSlot3Desc4
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The description for values between threshold 4 and threshold 5. analog-Inputs - The description for values between threshold 4 and threshold 5. analog-Sensors - The description for values between threshold 4 and threshold 5.
1.3.6.1.4.1.994.3.4.7.20.1.8DescriptionStringread-writecurrent
pSlot3Desc5
OBJECT-TYPE
This field is used in the following card types: analog-Inputs - Description for a communications failure to the sensor. analog-Sensors - Description for a communications failure to the sensor.
1.3.6.1.4.1.994.3.4.7.20.1.9DescriptionStringread-writecurrent
pSlot3Configured
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - If set to true, changes of state will be reported. If set to false, not change of states will be reported. discrete-outputs - If set to true, the control point will operate. If false, it will not operate. serial-ports - If set to true, this serial port will be usable. If set to false the port will not be usable. onboard-sensors - If set to true, the onboard sensors will be used. If set to false the will be ignored. analog-Inputs - If set to true, the analog inputs will be usable. If set to false the analog inputs will be ignored. analog-Sensors - If set to true, the sensor inputs will be usable. If set to false the sensor inputs will be ignored.
1.3.6.1.4.1.994.3.4.7.20.1.10Configuredread-writecurrent
pSlot3SendEmail
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - If set to true, an email will be sent on a change of state. If false, no email will be sent. onboard-sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Inputs - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent.
1.3.6.1.4.1.994.3.4.7.20.1.11Booleanread-writecurrent
pSlot3SendSNMPTrap
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - If set to true, an SNMP trap will be sent on a change of state. If false, no SNMP trap will be sent. onboard-sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Inputs - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent.
1.3.6.1.4.1.994.3.4.7.20.1.12Booleanread-writecurrent
pSlot3IpAddress
OBJECT-TYPE
This field is used in the following card types: serial-ports - IP Address of the target device.
1.3.6.1.4.1.994.3.4.7.20.1.14IpAddressread-writecurrent
pSlot3Level0
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Level of the off state. discrete-outputs - Level of the control point when open. onboard-sensors - The level for values between threshold 0 and threshold 1. analog-Inputs - The level for values between threshold 0 and threshold 1. analog-Sensors - The level for values between threshold 0 and threshold 1.
1.3.6.1.4.1.994.3.4.7.20.1.17Levelread-writecurrent
pSlot3Level1
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Level of the on state. discrete-outputs - Level of the control point when closed. onboard-sensors - The level for values between threshold 1 and threshold 2. analog-Inputs - The level for values between threshold 1 and threshold 2. analog-Sensors - The level for values between threshold 1 and threshold 2.
1.3.6.1.4.1.994.3.4.7.20.1.18Levelread-writecurrent
pSlot3Level2
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The level for values between threshold 2 and threshold 3. analog-Inputs - The level for values between threshold 2 and threshold 3. analog-Sensors - The level for values between threshold 2 and threshold 3.
1.3.6.1.4.1.994.3.4.7.20.1.19Levelread-writecurrent
pSlot3Level3
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The level for values between threshold 3 and threshold 4. analog-Inputs - The level for values between threshold 3 and threshold 4. analog-Sensors - The level for values between threshold 3 and threshold 4.
1.3.6.1.4.1.994.3.4.7.20.1.20Levelread-writecurrent
pSlot3Level4
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The level for values between threshold 4 and threshold 5. analog-Inputs - The level for values between threshold 4 and threshold 5. analog-Sensors - The level for values between threshold 4 and threshold 5.
1.3.6.1.4.1.994.3.4.7.20.1.21Levelread-writecurrent
pSlot3Level5
OBJECT-TYPE
This field is used in the following card types: analog-Inputs - Level of a communications failure to the sensor. analog-Sensors - Level of a communications failure to the sensor.
1.3.6.1.4.1.994.3.4.7.20.1.22Levelread-writecurrent
pSlot3ReadPeriod
OBJECT-TYPE
This field is used in the following card types: serial-ports - Inactivity timeout (in minutes).
1.3.6.1.4.1.994.3.4.7.20.1.23Integer32read-writecurrent
pSlot3Thresh0
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the minimun analog value. analog-Inputs - This is the maximum analog value. analog-Sensors - This is the maximum analog value.
1.3.6.1.4.1.994.3.4.7.20.1.28DescriptionStringread-onlycurrent
pSlot3Thresh1
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the first threshold value. analog-Inputs - This is the first threshold value. analog-Sensors - This is the first threshold value.
1.3.6.1.4.1.994.3.4.7.20.1.29DescriptionStringread-writecurrent
pSlot3Thresh2
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the second threshold value. analog-Inputs - This is the second threshold value. analog-Sensors - This is the second threshold value.
1.3.6.1.4.1.994.3.4.7.20.1.30DescriptionStringread-writecurrent
pSlot3Thresh3
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the third threshold value. analog-Inputs - This is the third threshold value. analog-Sensors - This is the third threshold value.
1.3.6.1.4.1.994.3.4.7.20.1.31DescriptionStringread-writecurrent
pSlot3Thresh4
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the fourth threshold value. analog-Inputs - This is the fourth threshold value. analog-Sensors - This is the fourth threshold value.
1.3.6.1.4.1.994.3.4.7.20.1.32DescriptionStringread-writecurrent
pSlot3Thresh5
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the maximum threshold value. analog-Inputs - This is the minimum threshold value. analog-Sensors - This is the minimum threshold value.
1.3.6.1.4.1.994.3.4.7.20.1.33DescriptionStringread-onlycurrent
pSlot3ContactStyle
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Determines the type of contact.
1.3.6.1.4.1.994.3.4.7.20.1.44ContactStyleread-writecurrent
pSlot3Units
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - Description of the units of measurement. analog-Inputs - Description of the units of measurement. analog-Sensors - Description of the units of measurement.
1.3.6.1.4.1.994.3.4.7.20.1.46DescriptionStringread-onlycurrent
pSlot3OutputMode
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - Defines the different ways a control point can be activated.
1.3.6.1.4.1.994.3.4.7.20.1.47OutputModeread-writecurrent
pSlot3OutputState
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - A value of 0 will open the control point. A value of 1 will close the control point.
1.3.6.1.4.1.994.3.4.7.20.1.48OutputStateread-writecurrent
pSlot3OutputAuto
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - When this control point is opened, this alarm point will change state to the on state.
1.3.6.1.4.1.994.3.4.7.20.1.49Integer32read-writecurrent
pSlot3BaudRate
OBJECT-TYPE
This field is used in the following card types: serial-ports - Baud rate of the serial port.
1.3.6.1.4.1.994.3.4.7.20.1.57BaudRateread-writecurrent
pSlot3DataBits
OBJECT-TYPE
This field is used in the following card types: serial-ports - Number of data bit for the serial port.
1.3.6.1.4.1.994.3.4.7.20.1.58DataBitsread-writecurrent
pSlot3Parity
OBJECT-TYPE
This field is used in the following card types: serial-ports - Parity of the serial port.
1.3.6.1.4.1.994.3.4.7.20.1.59Parityread-writecurrent
pSlot3StopBits
OBJECT-TYPE
This field is used in the following card types: serial-ports - Number of stop bits for the serial port.
1.3.6.1.4.1.994.3.4.7.20.1.60StopBitsread-writecurrent
pSlot3Protocol
OBJECT-TYPE
This field is used in the following card types: serial-ports - Protocol the serial port is speaking.
1.3.6.1.4.1.994.3.4.7.20.1.61Protocolread-writecurrent
pSlot3SerialRTS
OBJECT-TYPE
This field is used in the following card types: serial-ports - Request To Send (RTS) setting for the serial port.
1.3.6.1.4.1.994.3.4.7.20.1.62SerialRTSread-writecurrent
pSlot3SerialCTS
OBJECT-TYPE
This field is used in the following card types: serial-ports - Clear To Send (CTS) setting for the serial port.
1.3.6.1.4.1.994.3.4.7.20.1.63SerialCTSread-writecurrent
pSlot3LiveDescription
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The current description of the alarm state. onboard-sensors - The description of the current state of the onboard sensor analog-Inputs - The description of the current state of the analog input. analog-Sensors - The description of the current state of the sensor input.
1.3.6.1.4.1.994.3.4.7.20.1.64DescriptionStringread-onlycurrent
pSlot3LiveLevel
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The current level of the alarm. onboard-sensors - The level of the current state of the onboard sensor. analog-Inputs - The level of the current state of the analog input. analog-Sensors - The level of the current state of the sensor input.
1.3.6.1.4.1.994.3.4.7.20.1.65DescriptionStringread-onlycurrent
pSlot3LiveRaw
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The current reading from the onboard sensor. This value will always be between the threshold 0 and threshold 5 values. analog-Inputs - The current reading from the analog input. This value will always be between the threshold 0 and threshold 5 values. analog-Sensors - The current reading from the sensor input. This value will always be between the threshold 0 and threshold 5 values.
1.3.6.1.4.1.994.3.4.7.20.1.66DescriptionStringread-onlycurrent
pSlot3LiveTime
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The time of the last change of state. onboard-sensors - The time of the last event. analog-Inputs - The time of the last event. analog-Sensors - The time of the last event.
1.3.6.1.4.1.994.3.4.7.20.1.67DescriptionStringread-onlycurrent
pSlot3Present
OBJECT-TYPE
This field is used in the following card types: serial-ports - If set to true, the serial port exists. If set to false the serial port does not exist.
1.3.6.1.4.1.994.3.4.7.20.1.68Booleanread-onlycurrent
pSlot3OutputAutoPkg
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - When this control point is opened, this is the package that the alarm point is located.
1.3.6.1.4.1.994.3.4.7.20.1.71Integer32read-writecurrent
pSlot3VoltageRange
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The voltage range. analog-Inputs - The voltage range. analog-Sensors - The voltage range.
1.3.6.1.4.1.994.3.4.7.20.1.72VoltageRangeread-onlycurrent
pSlot3IPPortNum
OBJECT-TYPE
This field is used in the following card types: serial-ports - IP port number of the target device.
1.3.6.1.4.1.994.3.4.7.20.1.73Integer32read-writecurrent
pSlot3IOFormat
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The io format of discrete inputs. discrete-outputs - The io format of discrete outputs. serial-ports - The io format of serial ports. onboard-sensors - The io format of onboard sensors. analog-Inputs - The io format of analog inputs. analog-Sensors - The io format of analog sensors.
1.3.6.1.4.1.994.3.4.7.20.1.75IOFormatread-onlycurrent
pSlot3PortType
OBJECT-TYPE
This field is used in the following card types: serial-ports - The type of serial port.
1.3.6.1.4.1.994.3.4.7.20.1.76PortTyperead-onlycurrent
pSlot3TL1SID
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.20.1.116DescriptionStringread-writecurrent
pSlot3TL1COND
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.20.1.117DescriptionStringread-writecurrent
pSlot3TL1Eqpt
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.20.1.118DescriptionStringread-writecurrent
pSlot3TL1Env
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.20.1.119Booleanread-writecurrent
pSlot3TL1Srveff
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.20.1.120TL1Srveffread-writecurrent
pSlot3TL1Locn
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.20.1.121TL1Locnread-writecurrent
pSlot3TL1Dirn
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.20.1.122TL1Dirnread-writecurrent
pSlot3SensorType
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The type of sensor. analog-Inputs - The type of sensor. analog-Sensors - The type of sensor.
1.3.6.1.4.1.994.3.4.7.20.1.131SensorTyperead-onlycurrent
pSlot3Index
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.20.1.999Integer32 (1..32)read-onlycurrent
pSlot4Table
OBJECT-TYPE
Table for configuration of Slot4
1.3.6.1.4.1.994.3.4.7.21not-accessiblecurrent
pSlot4Entry
OBJECT-TYPE
Entry for configuration table of Slot4
1.3.6.1.4.1.994.3.4.7.21.1not-accessiblecurrent
pSlot4Description
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Description of the alarm point. discrete-outputs - Description of the control point. serial-ports - Description of the serial port. onboard-sensors - Description of the onboard device. analog-Inputs - Description of the analog input device. analog-Sensors - Description of the sensor input device.
1.3.6.1.4.1.994.3.4.7.21.1.3DescriptionStringread-writecurrent
pSlot4Desc0
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Description of the off state. discrete-outputs - Description when the control point is open. onboard-sensors - The description for values between threshold 0 and threshold 1. analog-Inputs - The description for values between threshold 0 and threshold 1. analog-Sensors - The description for values between threshold 0 and threshold 1.
1.3.6.1.4.1.994.3.4.7.21.1.4DescriptionStringread-writecurrent
pSlot4Desc1
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Description of the on state. discrete-outputs - Description when the control point is closed. onboard-sensors - The description for values between threshold 1 and threshold 2. analog-Inputs - The description for values between threshold 1 and threshold 2. analog-Sensors - The description for values between threshold 1 and threshold 2.
1.3.6.1.4.1.994.3.4.7.21.1.5DescriptionStringread-writecurrent
pSlot4Desc2
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The description for values between threshold 2 and threshold 3. analog-Inputs - The description for values between threshold 2 and threshold 3. analog-Sensors - The description for values between threshold 2 and threshold 3.
1.3.6.1.4.1.994.3.4.7.21.1.6DescriptionStringread-writecurrent
pSlot4Desc3
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The description for values between threshold 3 and threshold 4. analog-Inputs - The description for values between threshold 3 and threshold 4. analog-Sensors - The description for values between threshold 3 and threshold 4.
1.3.6.1.4.1.994.3.4.7.21.1.7DescriptionStringread-writecurrent
pSlot4Desc4
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The description for values between threshold 4 and threshold 5. analog-Inputs - The description for values between threshold 4 and threshold 5. analog-Sensors - The description for values between threshold 4 and threshold 5.
1.3.6.1.4.1.994.3.4.7.21.1.8DescriptionStringread-writecurrent
pSlot4Desc5
OBJECT-TYPE
This field is used in the following card types: analog-Inputs - Description for a communications failure to the sensor. analog-Sensors - Description for a communications failure to the sensor.
1.3.6.1.4.1.994.3.4.7.21.1.9DescriptionStringread-writecurrent
pSlot4Configured
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - If set to true, changes of state will be reported. If set to false, not change of states will be reported. discrete-outputs - If set to true, the control point will operate. If false, it will not operate. serial-ports - If set to true, this serial port will be usable. If set to false the port will not be usable. onboard-sensors - If set to true, the onboard sensors will be used. If set to false the will be ignored. analog-Inputs - If set to true, the analog inputs will be usable. If set to false the analog inputs will be ignored. analog-Sensors - If set to true, the sensor inputs will be usable. If set to false the sensor inputs will be ignored.
1.3.6.1.4.1.994.3.4.7.21.1.10Configuredread-writecurrent
pSlot4SendEmail
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - If set to true, an email will be sent on a change of state. If false, no email will be sent. onboard-sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Inputs - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent.
1.3.6.1.4.1.994.3.4.7.21.1.11Booleanread-writecurrent
pSlot4SendSNMPTrap
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - If set to true, an SNMP trap will be sent on a change of state. If false, no SNMP trap will be sent. onboard-sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Inputs - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent.
1.3.6.1.4.1.994.3.4.7.21.1.12Booleanread-writecurrent
pSlot4IpAddress
OBJECT-TYPE
This field is used in the following card types: serial-ports - IP Address of the target device.
1.3.6.1.4.1.994.3.4.7.21.1.14IpAddressread-writecurrent
pSlot4Level0
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Level of the off state. discrete-outputs - Level of the control point when open. onboard-sensors - The level for values between threshold 0 and threshold 1. analog-Inputs - The level for values between threshold 0 and threshold 1. analog-Sensors - The level for values between threshold 0 and threshold 1.
1.3.6.1.4.1.994.3.4.7.21.1.17Levelread-writecurrent
pSlot4Level1
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Level of the on state. discrete-outputs - Level of the control point when closed. onboard-sensors - The level for values between threshold 1 and threshold 2. analog-Inputs - The level for values between threshold 1 and threshold 2. analog-Sensors - The level for values between threshold 1 and threshold 2.
1.3.6.1.4.1.994.3.4.7.21.1.18Levelread-writecurrent
pSlot4Level2
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The level for values between threshold 2 and threshold 3. analog-Inputs - The level for values between threshold 2 and threshold 3. analog-Sensors - The level for values between threshold 2 and threshold 3.
1.3.6.1.4.1.994.3.4.7.21.1.19Levelread-writecurrent
pSlot4Level3
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The level for values between threshold 3 and threshold 4. analog-Inputs - The level for values between threshold 3 and threshold 4. analog-Sensors - The level for values between threshold 3 and threshold 4.
1.3.6.1.4.1.994.3.4.7.21.1.20Levelread-writecurrent
pSlot4Level4
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The level for values between threshold 4 and threshold 5. analog-Inputs - The level for values between threshold 4 and threshold 5. analog-Sensors - The level for values between threshold 4 and threshold 5.
1.3.6.1.4.1.994.3.4.7.21.1.21Levelread-writecurrent
pSlot4Level5
OBJECT-TYPE
This field is used in the following card types: analog-Inputs - Level of a communications failure to the sensor. analog-Sensors - Level of a communications failure to the sensor.
1.3.6.1.4.1.994.3.4.7.21.1.22Levelread-writecurrent
pSlot4ReadPeriod
OBJECT-TYPE
This field is used in the following card types: serial-ports - Inactivity timeout (in minutes).
1.3.6.1.4.1.994.3.4.7.21.1.23Integer32read-writecurrent
pSlot4Thresh0
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the minimun analog value. analog-Inputs - This is the maximum analog value. analog-Sensors - This is the maximum analog value.
1.3.6.1.4.1.994.3.4.7.21.1.28DescriptionStringread-onlycurrent
pSlot4Thresh1
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the first threshold value. analog-Inputs - This is the first threshold value. analog-Sensors - This is the first threshold value.
1.3.6.1.4.1.994.3.4.7.21.1.29DescriptionStringread-writecurrent
pSlot4Thresh2
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the second threshold value. analog-Inputs - This is the second threshold value. analog-Sensors - This is the second threshold value.
1.3.6.1.4.1.994.3.4.7.21.1.30DescriptionStringread-writecurrent
pSlot4Thresh3
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the third threshold value. analog-Inputs - This is the third threshold value. analog-Sensors - This is the third threshold value.
1.3.6.1.4.1.994.3.4.7.21.1.31DescriptionStringread-writecurrent
pSlot4Thresh4
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the fourth threshold value. analog-Inputs - This is the fourth threshold value. analog-Sensors - This is the fourth threshold value.
1.3.6.1.4.1.994.3.4.7.21.1.32DescriptionStringread-writecurrent
pSlot4Thresh5
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the maximum threshold value. analog-Inputs - This is the minimum threshold value. analog-Sensors - This is the minimum threshold value.
1.3.6.1.4.1.994.3.4.7.21.1.33DescriptionStringread-onlycurrent
pSlot4ContactStyle
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Determines the type of contact.
1.3.6.1.4.1.994.3.4.7.21.1.44ContactStyleread-writecurrent
pSlot4Units
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - Description of the units of measurement. analog-Inputs - Description of the units of measurement. analog-Sensors - Description of the units of measurement.
1.3.6.1.4.1.994.3.4.7.21.1.46DescriptionStringread-onlycurrent
pSlot4OutputMode
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - Defines the different ways a control point can be activated.
1.3.6.1.4.1.994.3.4.7.21.1.47OutputModeread-writecurrent
pSlot4OutputState
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - A value of 0 will open the control point. A value of 1 will close the control point.
1.3.6.1.4.1.994.3.4.7.21.1.48OutputStateread-writecurrent
pSlot4OutputAuto
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - When this control point is opened, this alarm point will change state to the on state.
1.3.6.1.4.1.994.3.4.7.21.1.49Integer32read-writecurrent
pSlot4BaudRate
OBJECT-TYPE
This field is used in the following card types: serial-ports - Baud rate of the serial port.
1.3.6.1.4.1.994.3.4.7.21.1.57BaudRateread-writecurrent
pSlot4DataBits
OBJECT-TYPE
This field is used in the following card types: serial-ports - Number of data bit for the serial port.
1.3.6.1.4.1.994.3.4.7.21.1.58DataBitsread-writecurrent
pSlot4Parity
OBJECT-TYPE
This field is used in the following card types: serial-ports - Parity of the serial port.
1.3.6.1.4.1.994.3.4.7.21.1.59Parityread-writecurrent
pSlot4StopBits
OBJECT-TYPE
This field is used in the following card types: serial-ports - Number of stop bits for the serial port.
1.3.6.1.4.1.994.3.4.7.21.1.60StopBitsread-writecurrent
pSlot4Protocol
OBJECT-TYPE
This field is used in the following card types: serial-ports - Protocol the serial port is speaking.
1.3.6.1.4.1.994.3.4.7.21.1.61Protocolread-writecurrent
pSlot4SerialRTS
OBJECT-TYPE
This field is used in the following card types: serial-ports - Request To Send (RTS) setting for the serial port.
1.3.6.1.4.1.994.3.4.7.21.1.62SerialRTSread-writecurrent
pSlot4SerialCTS
OBJECT-TYPE
This field is used in the following card types: serial-ports - Clear To Send (CTS) setting for the serial port.
1.3.6.1.4.1.994.3.4.7.21.1.63SerialCTSread-writecurrent
pSlot4LiveDescription
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The current description of the alarm state. onboard-sensors - The description of the current state of the onboard sensor analog-Inputs - The description of the current state of the analog input. analog-Sensors - The description of the current state of the sensor input.
1.3.6.1.4.1.994.3.4.7.21.1.64DescriptionStringread-onlycurrent
pSlot4LiveLevel
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The current level of the alarm. onboard-sensors - The level of the current state of the onboard sensor. analog-Inputs - The level of the current state of the analog input. analog-Sensors - The level of the current state of the sensor input.
1.3.6.1.4.1.994.3.4.7.21.1.65DescriptionStringread-onlycurrent
pSlot4LiveRaw
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The current reading from the onboard sensor. This value will always be between the threshold 0 and threshold 5 values. analog-Inputs - The current reading from the analog input. This value will always be between the threshold 0 and threshold 5 values. analog-Sensors - The current reading from the sensor input. This value will always be between the threshold 0 and threshold 5 values.
1.3.6.1.4.1.994.3.4.7.21.1.66DescriptionStringread-onlycurrent
pSlot4LiveTime
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The time of the last change of state. onboard-sensors - The time of the last event. analog-Inputs - The time of the last event. analog-Sensors - The time of the last event.
1.3.6.1.4.1.994.3.4.7.21.1.67DescriptionStringread-onlycurrent
pSlot4Present
OBJECT-TYPE
This field is used in the following card types: serial-ports - If set to true, the serial port exists. If set to false the serial port does not exist.
1.3.6.1.4.1.994.3.4.7.21.1.68Booleanread-onlycurrent
pSlot4OutputAutoPkg
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - When this control point is opened, this is the package that the alarm point is located.
1.3.6.1.4.1.994.3.4.7.21.1.71Integer32read-writecurrent
pSlot4VoltageRange
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The voltage range. analog-Inputs - The voltage range. analog-Sensors - The voltage range.
1.3.6.1.4.1.994.3.4.7.21.1.72VoltageRangeread-onlycurrent
pSlot4IPPortNum
OBJECT-TYPE
This field is used in the following card types: serial-ports - IP port number of the target device.
1.3.6.1.4.1.994.3.4.7.21.1.73Integer32read-writecurrent
pSlot4IOFormat
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The io format of discrete inputs. discrete-outputs - The io format of discrete outputs. serial-ports - The io format of serial ports. onboard-sensors - The io format of onboard sensors. analog-Inputs - The io format of analog inputs. analog-Sensors - The io format of analog sensors.
1.3.6.1.4.1.994.3.4.7.21.1.75IOFormatread-onlycurrent
pSlot4PortType
OBJECT-TYPE
This field is used in the following card types: serial-ports - The type of serial port.
1.3.6.1.4.1.994.3.4.7.21.1.76PortTyperead-onlycurrent
pSlot4TL1SID
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.21.1.116DescriptionStringread-writecurrent
pSlot4TL1COND
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.21.1.117DescriptionStringread-writecurrent
pSlot4TL1Eqpt
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.21.1.118DescriptionStringread-writecurrent
pSlot4TL1Env
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.21.1.119Booleanread-writecurrent
pSlot4TL1Srveff
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.21.1.120TL1Srveffread-writecurrent
pSlot4TL1Locn
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.21.1.121TL1Locnread-writecurrent
pSlot4TL1Dirn
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.21.1.122TL1Dirnread-writecurrent
pSlot4SensorType
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The type of sensor. analog-Inputs - The type of sensor. analog-Sensors - The type of sensor.
1.3.6.1.4.1.994.3.4.7.21.1.131SensorTyperead-onlycurrent
pSlot4Index
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.21.1.999Integer32 (1..32)read-onlycurrent
pSlot5Table
OBJECT-TYPE
Table for configuration of Slot5
1.3.6.1.4.1.994.3.4.7.22not-accessiblecurrent
pSlot5Entry
OBJECT-TYPE
Entry for configuration table of Slot5
1.3.6.1.4.1.994.3.4.7.22.1not-accessiblecurrent
pSlot5Description
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Description of the alarm point. discrete-outputs - Description of the control point. serial-ports - Description of the serial port. onboard-sensors - Description of the onboard device. analog-Inputs - Description of the analog input device. analog-Sensors - Description of the sensor input device.
1.3.6.1.4.1.994.3.4.7.22.1.3DescriptionStringread-writecurrent
pSlot5Desc0
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Description of the off state. discrete-outputs - Description when the control point is open. onboard-sensors - The description for values between threshold 0 and threshold 1. analog-Inputs - The description for values between threshold 0 and threshold 1. analog-Sensors - The description for values between threshold 0 and threshold 1.
1.3.6.1.4.1.994.3.4.7.22.1.4DescriptionStringread-writecurrent
pSlot5Desc1
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Description of the on state. discrete-outputs - Description when the control point is closed. onboard-sensors - The description for values between threshold 1 and threshold 2. analog-Inputs - The description for values between threshold 1 and threshold 2. analog-Sensors - The description for values between threshold 1 and threshold 2.
1.3.6.1.4.1.994.3.4.7.22.1.5DescriptionStringread-writecurrent
pSlot5Desc2
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The description for values between threshold 2 and threshold 3. analog-Inputs - The description for values between threshold 2 and threshold 3. analog-Sensors - The description for values between threshold 2 and threshold 3.
1.3.6.1.4.1.994.3.4.7.22.1.6DescriptionStringread-writecurrent
pSlot5Desc3
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The description for values between threshold 3 and threshold 4. analog-Inputs - The description for values between threshold 3 and threshold 4. analog-Sensors - The description for values between threshold 3 and threshold 4.
1.3.6.1.4.1.994.3.4.7.22.1.7DescriptionStringread-writecurrent
pSlot5Desc4
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The description for values between threshold 4 and threshold 5. analog-Inputs - The description for values between threshold 4 and threshold 5. analog-Sensors - The description for values between threshold 4 and threshold 5.
1.3.6.1.4.1.994.3.4.7.22.1.8DescriptionStringread-writecurrent
pSlot5Desc5
OBJECT-TYPE
This field is used in the following card types: analog-Inputs - Description for a communications failure to the sensor. analog-Sensors - Description for a communications failure to the sensor.
1.3.6.1.4.1.994.3.4.7.22.1.9DescriptionStringread-writecurrent
pSlot5Configured
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - If set to true, changes of state will be reported. If set to false, not change of states will be reported. discrete-outputs - If set to true, the control point will operate. If false, it will not operate. serial-ports - If set to true, this serial port will be usable. If set to false the port will not be usable. onboard-sensors - If set to true, the onboard sensors will be used. If set to false the will be ignored. analog-Inputs - If set to true, the analog inputs will be usable. If set to false the analog inputs will be ignored. analog-Sensors - If set to true, the sensor inputs will be usable. If set to false the sensor inputs will be ignored.
1.3.6.1.4.1.994.3.4.7.22.1.10Configuredread-writecurrent
pSlot5SendEmail
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - If set to true, an email will be sent on a change of state. If false, no email will be sent. onboard-sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Inputs - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent.
1.3.6.1.4.1.994.3.4.7.22.1.11Booleanread-writecurrent
pSlot5SendSNMPTrap
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - If set to true, an SNMP trap will be sent on a change of state. If false, no SNMP trap will be sent. onboard-sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Inputs - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent.
1.3.6.1.4.1.994.3.4.7.22.1.12Booleanread-writecurrent
pSlot5IpAddress
OBJECT-TYPE
This field is used in the following card types: serial-ports - IP Address of the target device.
1.3.6.1.4.1.994.3.4.7.22.1.14IpAddressread-writecurrent
pSlot5Level0
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Level of the off state. discrete-outputs - Level of the control point when open. onboard-sensors - The level for values between threshold 0 and threshold 1. analog-Inputs - The level for values between threshold 0 and threshold 1. analog-Sensors - The level for values between threshold 0 and threshold 1.
1.3.6.1.4.1.994.3.4.7.22.1.17Levelread-writecurrent
pSlot5Level1
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Level of the on state. discrete-outputs - Level of the control point when closed. onboard-sensors - The level for values between threshold 1 and threshold 2. analog-Inputs - The level for values between threshold 1 and threshold 2. analog-Sensors - The level for values between threshold 1 and threshold 2.
1.3.6.1.4.1.994.3.4.7.22.1.18Levelread-writecurrent
pSlot5Level2
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The level for values between threshold 2 and threshold 3. analog-Inputs - The level for values between threshold 2 and threshold 3. analog-Sensors - The level for values between threshold 2 and threshold 3.
1.3.6.1.4.1.994.3.4.7.22.1.19Levelread-writecurrent
pSlot5Level3
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The level for values between threshold 3 and threshold 4. analog-Inputs - The level for values between threshold 3 and threshold 4. analog-Sensors - The level for values between threshold 3 and threshold 4.
1.3.6.1.4.1.994.3.4.7.22.1.20Levelread-writecurrent
pSlot5Level4
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The level for values between threshold 4 and threshold 5. analog-Inputs - The level for values between threshold 4 and threshold 5. analog-Sensors - The level for values between threshold 4 and threshold 5.
1.3.6.1.4.1.994.3.4.7.22.1.21Levelread-writecurrent
pSlot5Level5
OBJECT-TYPE
This field is used in the following card types: analog-Inputs - Level of a communications failure to the sensor. analog-Sensors - Level of a communications failure to the sensor.
1.3.6.1.4.1.994.3.4.7.22.1.22Levelread-writecurrent
pSlot5ReadPeriod
OBJECT-TYPE
This field is used in the following card types: serial-ports - Inactivity timeout (in minutes).
1.3.6.1.4.1.994.3.4.7.22.1.23Integer32read-writecurrent
pSlot5Thresh0
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the minimun analog value. analog-Inputs - This is the maximum analog value. analog-Sensors - This is the maximum analog value.
1.3.6.1.4.1.994.3.4.7.22.1.28DescriptionStringread-onlycurrent
pSlot5Thresh1
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the first threshold value. analog-Inputs - This is the first threshold value. analog-Sensors - This is the first threshold value.
1.3.6.1.4.1.994.3.4.7.22.1.29DescriptionStringread-writecurrent
pSlot5Thresh2
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the second threshold value. analog-Inputs - This is the second threshold value. analog-Sensors - This is the second threshold value.
1.3.6.1.4.1.994.3.4.7.22.1.30DescriptionStringread-writecurrent
pSlot5Thresh3
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the third threshold value. analog-Inputs - This is the third threshold value. analog-Sensors - This is the third threshold value.
1.3.6.1.4.1.994.3.4.7.22.1.31DescriptionStringread-writecurrent
pSlot5Thresh4
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the fourth threshold value. analog-Inputs - This is the fourth threshold value. analog-Sensors - This is the fourth threshold value.
1.3.6.1.4.1.994.3.4.7.22.1.32DescriptionStringread-writecurrent
pSlot5Thresh5
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the maximum threshold value. analog-Inputs - This is the minimum threshold value. analog-Sensors - This is the minimum threshold value.
1.3.6.1.4.1.994.3.4.7.22.1.33DescriptionStringread-onlycurrent
pSlot5ContactStyle
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Determines the type of contact.
1.3.6.1.4.1.994.3.4.7.22.1.44ContactStyleread-writecurrent
pSlot5Units
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - Description of the units of measurement. analog-Inputs - Description of the units of measurement. analog-Sensors - Description of the units of measurement.
1.3.6.1.4.1.994.3.4.7.22.1.46DescriptionStringread-onlycurrent
pSlot5OutputMode
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - Defines the different ways a control point can be activated.
1.3.6.1.4.1.994.3.4.7.22.1.47OutputModeread-writecurrent
pSlot5OutputState
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - A value of 0 will open the control point. A value of 1 will close the control point.
1.3.6.1.4.1.994.3.4.7.22.1.48OutputStateread-writecurrent
pSlot5OutputAuto
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - When this control point is opened, this alarm point will change state to the on state.
1.3.6.1.4.1.994.3.4.7.22.1.49Integer32read-writecurrent
pSlot5BaudRate
OBJECT-TYPE
This field is used in the following card types: serial-ports - Baud rate of the serial port.
1.3.6.1.4.1.994.3.4.7.22.1.57BaudRateread-writecurrent
pSlot5DataBits
OBJECT-TYPE
This field is used in the following card types: serial-ports - Number of data bit for the serial port.
1.3.6.1.4.1.994.3.4.7.22.1.58DataBitsread-writecurrent
pSlot5Parity
OBJECT-TYPE
This field is used in the following card types: serial-ports - Parity of the serial port.
1.3.6.1.4.1.994.3.4.7.22.1.59Parityread-writecurrent
pSlot5StopBits
OBJECT-TYPE
This field is used in the following card types: serial-ports - Number of stop bits for the serial port.
1.3.6.1.4.1.994.3.4.7.22.1.60StopBitsread-writecurrent
pSlot5Protocol
OBJECT-TYPE
This field is used in the following card types: serial-ports - Protocol the serial port is speaking.
1.3.6.1.4.1.994.3.4.7.22.1.61Protocolread-writecurrent
pSlot5SerialRTS
OBJECT-TYPE
This field is used in the following card types: serial-ports - Request To Send (RTS) setting for the serial port.
1.3.6.1.4.1.994.3.4.7.22.1.62SerialRTSread-writecurrent
pSlot5SerialCTS
OBJECT-TYPE
This field is used in the following card types: serial-ports - Clear To Send (CTS) setting for the serial port.
1.3.6.1.4.1.994.3.4.7.22.1.63SerialCTSread-writecurrent
pSlot5LiveDescription
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The current description of the alarm state. onboard-sensors - The description of the current state of the onboard sensor analog-Inputs - The description of the current state of the analog input. analog-Sensors - The description of the current state of the sensor input.
1.3.6.1.4.1.994.3.4.7.22.1.64DescriptionStringread-onlycurrent
pSlot5LiveLevel
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The current level of the alarm. onboard-sensors - The level of the current state of the onboard sensor. analog-Inputs - The level of the current state of the analog input. analog-Sensors - The level of the current state of the sensor input.
1.3.6.1.4.1.994.3.4.7.22.1.65DescriptionStringread-onlycurrent
pSlot5LiveRaw
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The current reading from the onboard sensor. This value will always be between the threshold 0 and threshold 5 values. analog-Inputs - The current reading from the analog input. This value will always be between the threshold 0 and threshold 5 values. analog-Sensors - The current reading from the sensor input. This value will always be between the threshold 0 and threshold 5 values.
1.3.6.1.4.1.994.3.4.7.22.1.66DescriptionStringread-onlycurrent
pSlot5LiveTime
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The time of the last change of state. onboard-sensors - The time of the last event. analog-Inputs - The time of the last event. analog-Sensors - The time of the last event.
1.3.6.1.4.1.994.3.4.7.22.1.67DescriptionStringread-onlycurrent
pSlot5Present
OBJECT-TYPE
This field is used in the following card types: serial-ports - If set to true, the serial port exists. If set to false the serial port does not exist.
1.3.6.1.4.1.994.3.4.7.22.1.68Booleanread-onlycurrent
pSlot5OutputAutoPkg
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - When this control point is opened, this is the package that the alarm point is located.
1.3.6.1.4.1.994.3.4.7.22.1.71Integer32read-writecurrent
pSlot5VoltageRange
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The voltage range. analog-Inputs - The voltage range. analog-Sensors - The voltage range.
1.3.6.1.4.1.994.3.4.7.22.1.72VoltageRangeread-onlycurrent
pSlot5IPPortNum
OBJECT-TYPE
This field is used in the following card types: serial-ports - IP port number of the target device.
1.3.6.1.4.1.994.3.4.7.22.1.73Integer32read-writecurrent
pSlot5IOFormat
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The io format of discrete inputs. discrete-outputs - The io format of discrete outputs. serial-ports - The io format of serial ports. onboard-sensors - The io format of onboard sensors. analog-Inputs - The io format of analog inputs. analog-Sensors - The io format of analog sensors.
1.3.6.1.4.1.994.3.4.7.22.1.75IOFormatread-onlycurrent
pSlot5PortType
OBJECT-TYPE
This field is used in the following card types: serial-ports - The type of serial port.
1.3.6.1.4.1.994.3.4.7.22.1.76PortTyperead-onlycurrent
pSlot5TL1SID
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.22.1.116DescriptionStringread-writecurrent
pSlot5TL1COND
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.22.1.117DescriptionStringread-writecurrent
pSlot5TL1Eqpt
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.22.1.118DescriptionStringread-writecurrent
pSlot5TL1Env
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.22.1.119Booleanread-writecurrent
pSlot5TL1Srveff
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.22.1.120TL1Srveffread-writecurrent
pSlot5TL1Locn
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.22.1.121TL1Locnread-writecurrent
pSlot5TL1Dirn
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.22.1.122TL1Dirnread-writecurrent
pSlot5SensorType
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The type of sensor. analog-Inputs - The type of sensor. analog-Sensors - The type of sensor.
1.3.6.1.4.1.994.3.4.7.22.1.131SensorTyperead-onlycurrent
pSlot5Index
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.22.1.999Integer32 (1..32)read-onlycurrent
pSlot6Table
OBJECT-TYPE
Table for configuration of Slot6
1.3.6.1.4.1.994.3.4.7.23not-accessiblecurrent
pSlot6Entry
OBJECT-TYPE
Entry for configuration table of Slot6
1.3.6.1.4.1.994.3.4.7.23.1not-accessiblecurrent
pSlot6Description
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Description of the alarm point. discrete-outputs - Description of the control point. serial-ports - Description of the serial port. onboard-sensors - Description of the onboard device. analog-Inputs - Description of the analog input device. analog-Sensors - Description of the sensor input device.
1.3.6.1.4.1.994.3.4.7.23.1.3DescriptionStringread-writecurrent
pSlot6Desc0
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Description of the off state. discrete-outputs - Description when the control point is open. onboard-sensors - The description for values between threshold 0 and threshold 1. analog-Inputs - The description for values between threshold 0 and threshold 1. analog-Sensors - The description for values between threshold 0 and threshold 1.
1.3.6.1.4.1.994.3.4.7.23.1.4DescriptionStringread-writecurrent
pSlot6Desc1
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Description of the on state. discrete-outputs - Description when the control point is closed. onboard-sensors - The description for values between threshold 1 and threshold 2. analog-Inputs - The description for values between threshold 1 and threshold 2. analog-Sensors - The description for values between threshold 1 and threshold 2.
1.3.6.1.4.1.994.3.4.7.23.1.5DescriptionStringread-writecurrent
pSlot6Desc2
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The description for values between threshold 2 and threshold 3. analog-Inputs - The description for values between threshold 2 and threshold 3. analog-Sensors - The description for values between threshold 2 and threshold 3.
1.3.6.1.4.1.994.3.4.7.23.1.6DescriptionStringread-writecurrent
pSlot6Desc3
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The description for values between threshold 3 and threshold 4. analog-Inputs - The description for values between threshold 3 and threshold 4. analog-Sensors - The description for values between threshold 3 and threshold 4.
1.3.6.1.4.1.994.3.4.7.23.1.7DescriptionStringread-writecurrent
pSlot6Desc4
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The description for values between threshold 4 and threshold 5. analog-Inputs - The description for values between threshold 4 and threshold 5. analog-Sensors - The description for values between threshold 4 and threshold 5.
1.3.6.1.4.1.994.3.4.7.23.1.8DescriptionStringread-writecurrent
pSlot6Desc5
OBJECT-TYPE
This field is used in the following card types: analog-Inputs - Description for a communications failure to the sensor. analog-Sensors - Description for a communications failure to the sensor.
1.3.6.1.4.1.994.3.4.7.23.1.9DescriptionStringread-writecurrent
pSlot6Configured
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - If set to true, changes of state will be reported. If set to false, not change of states will be reported. discrete-outputs - If set to true, the control point will operate. If false, it will not operate. serial-ports - If set to true, this serial port will be usable. If set to false the port will not be usable. onboard-sensors - If set to true, the onboard sensors will be used. If set to false the will be ignored. analog-Inputs - If set to true, the analog inputs will be usable. If set to false the analog inputs will be ignored. analog-Sensors - If set to true, the sensor inputs will be usable. If set to false the sensor inputs will be ignored.
1.3.6.1.4.1.994.3.4.7.23.1.10Configuredread-writecurrent
pSlot6SendEmail
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - If set to true, an email will be sent on a change of state. If false, no email will be sent. onboard-sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Inputs - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent.
1.3.6.1.4.1.994.3.4.7.23.1.11Booleanread-writecurrent
pSlot6SendSNMPTrap
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - If set to true, an SNMP trap will be sent on a change of state. If false, no SNMP trap will be sent. onboard-sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Inputs - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent.
1.3.6.1.4.1.994.3.4.7.23.1.12Booleanread-writecurrent
pSlot6IpAddress
OBJECT-TYPE
This field is used in the following card types: serial-ports - IP Address of the target device.
1.3.6.1.4.1.994.3.4.7.23.1.14IpAddressread-writecurrent
pSlot6Level0
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Level of the off state. discrete-outputs - Level of the control point when open. onboard-sensors - The level for values between threshold 0 and threshold 1. analog-Inputs - The level for values between threshold 0 and threshold 1. analog-Sensors - The level for values between threshold 0 and threshold 1.
1.3.6.1.4.1.994.3.4.7.23.1.17Levelread-writecurrent
pSlot6Level1
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Level of the on state. discrete-outputs - Level of the control point when closed. onboard-sensors - The level for values between threshold 1 and threshold 2. analog-Inputs - The level for values between threshold 1 and threshold 2. analog-Sensors - The level for values between threshold 1 and threshold 2.
1.3.6.1.4.1.994.3.4.7.23.1.18Levelread-writecurrent
pSlot6Level2
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The level for values between threshold 2 and threshold 3. analog-Inputs - The level for values between threshold 2 and threshold 3. analog-Sensors - The level for values between threshold 2 and threshold 3.
1.3.6.1.4.1.994.3.4.7.23.1.19Levelread-writecurrent
pSlot6Level3
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The level for values between threshold 3 and threshold 4. analog-Inputs - The level for values between threshold 3 and threshold 4. analog-Sensors - The level for values between threshold 3 and threshold 4.
1.3.6.1.4.1.994.3.4.7.23.1.20Levelread-writecurrent
pSlot6Level4
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The level for values between threshold 4 and threshold 5. analog-Inputs - The level for values between threshold 4 and threshold 5. analog-Sensors - The level for values between threshold 4 and threshold 5.
1.3.6.1.4.1.994.3.4.7.23.1.21Levelread-writecurrent
pSlot6Level5
OBJECT-TYPE
This field is used in the following card types: analog-Inputs - Level of a communications failure to the sensor. analog-Sensors - Level of a communications failure to the sensor.
1.3.6.1.4.1.994.3.4.7.23.1.22Levelread-writecurrent
pSlot6ReadPeriod
OBJECT-TYPE
This field is used in the following card types: serial-ports - Inactivity timeout (in minutes).
1.3.6.1.4.1.994.3.4.7.23.1.23Integer32read-writecurrent
pSlot6Thresh0
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the minimun analog value. analog-Inputs - This is the maximum analog value. analog-Sensors - This is the maximum analog value.
1.3.6.1.4.1.994.3.4.7.23.1.28DescriptionStringread-onlycurrent
pSlot6Thresh1
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the first threshold value. analog-Inputs - This is the first threshold value. analog-Sensors - This is the first threshold value.
1.3.6.1.4.1.994.3.4.7.23.1.29DescriptionStringread-writecurrent
pSlot6Thresh2
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the second threshold value. analog-Inputs - This is the second threshold value. analog-Sensors - This is the second threshold value.
1.3.6.1.4.1.994.3.4.7.23.1.30DescriptionStringread-writecurrent
pSlot6Thresh3
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the third threshold value. analog-Inputs - This is the third threshold value. analog-Sensors - This is the third threshold value.
1.3.6.1.4.1.994.3.4.7.23.1.31DescriptionStringread-writecurrent
pSlot6Thresh4
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the fourth threshold value. analog-Inputs - This is the fourth threshold value. analog-Sensors - This is the fourth threshold value.
1.3.6.1.4.1.994.3.4.7.23.1.32DescriptionStringread-writecurrent
pSlot6Thresh5
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - This is the maximum threshold value. analog-Inputs - This is the minimum threshold value. analog-Sensors - This is the minimum threshold value.
1.3.6.1.4.1.994.3.4.7.23.1.33DescriptionStringread-onlycurrent
pSlot6ContactStyle
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - Determines the type of contact.
1.3.6.1.4.1.994.3.4.7.23.1.44ContactStyleread-writecurrent
pSlot6Units
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - Description of the units of measurement. analog-Inputs - Description of the units of measurement. analog-Sensors - Description of the units of measurement.
1.3.6.1.4.1.994.3.4.7.23.1.46DescriptionStringread-onlycurrent
pSlot6OutputMode
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - Defines the different ways a control point can be activated.
1.3.6.1.4.1.994.3.4.7.23.1.47OutputModeread-writecurrent
pSlot6OutputState
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - A value of 0 will open the control point. A value of 1 will close the control point.
1.3.6.1.4.1.994.3.4.7.23.1.48OutputStateread-writecurrent
pSlot6OutputAuto
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - When this control point is opened, this alarm point will change state to the on state.
1.3.6.1.4.1.994.3.4.7.23.1.49Integer32read-writecurrent
pSlot6BaudRate
OBJECT-TYPE
This field is used in the following card types: serial-ports - Baud rate of the serial port.
1.3.6.1.4.1.994.3.4.7.23.1.57BaudRateread-writecurrent
pSlot6DataBits
OBJECT-TYPE
This field is used in the following card types: serial-ports - Number of data bit for the serial port.
1.3.6.1.4.1.994.3.4.7.23.1.58DataBitsread-writecurrent
pSlot6Parity
OBJECT-TYPE
This field is used in the following card types: serial-ports - Parity of the serial port.
1.3.6.1.4.1.994.3.4.7.23.1.59Parityread-writecurrent
pSlot6StopBits
OBJECT-TYPE
This field is used in the following card types: serial-ports - Number of stop bits for the serial port.
1.3.6.1.4.1.994.3.4.7.23.1.60StopBitsread-writecurrent
pSlot6Protocol
OBJECT-TYPE
This field is used in the following card types: serial-ports - Protocol the serial port is speaking.
1.3.6.1.4.1.994.3.4.7.23.1.61Protocolread-writecurrent
pSlot6SerialRTS
OBJECT-TYPE
This field is used in the following card types: serial-ports - Request To Send (RTS) setting for the serial port.
1.3.6.1.4.1.994.3.4.7.23.1.62SerialRTSread-writecurrent
pSlot6SerialCTS
OBJECT-TYPE
This field is used in the following card types: serial-ports - Clear To Send (CTS) setting for the serial port.
1.3.6.1.4.1.994.3.4.7.23.1.63SerialCTSread-writecurrent
pSlot6LiveDescription
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The current description of the alarm state. onboard-sensors - The description of the current state of the onboard sensor analog-Inputs - The description of the current state of the analog input. analog-Sensors - The description of the current state of the sensor input.
1.3.6.1.4.1.994.3.4.7.23.1.64DescriptionStringread-onlycurrent
pSlot6LiveLevel
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The current level of the alarm. onboard-sensors - The level of the current state of the onboard sensor. analog-Inputs - The level of the current state of the analog input. analog-Sensors - The level of the current state of the sensor input.
1.3.6.1.4.1.994.3.4.7.23.1.65DescriptionStringread-onlycurrent
pSlot6LiveRaw
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The current reading from the onboard sensor. This value will always be between the threshold 0 and threshold 5 values. analog-Inputs - The current reading from the analog input. This value will always be between the threshold 0 and threshold 5 values. analog-Sensors - The current reading from the sensor input. This value will always be between the threshold 0 and threshold 5 values.
1.3.6.1.4.1.994.3.4.7.23.1.66DescriptionStringread-onlycurrent
pSlot6LiveTime
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The time of the last change of state. onboard-sensors - The time of the last event. analog-Inputs - The time of the last event. analog-Sensors - The time of the last event.
1.3.6.1.4.1.994.3.4.7.23.1.67DescriptionStringread-onlycurrent
pSlot6Present
OBJECT-TYPE
This field is used in the following card types: serial-ports - If set to true, the serial port exists. If set to false the serial port does not exist.
1.3.6.1.4.1.994.3.4.7.23.1.68Booleanread-onlycurrent
pSlot6OutputAutoPkg
OBJECT-TYPE
This field is used in the following card types: discrete-outputs - When this control point is opened, this is the package that the alarm point is located.
1.3.6.1.4.1.994.3.4.7.23.1.71Integer32read-writecurrent
pSlot6VoltageRange
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The voltage range. analog-Inputs - The voltage range. analog-Sensors - The voltage range.
1.3.6.1.4.1.994.3.4.7.23.1.72VoltageRangeread-onlycurrent
pSlot6IPPortNum
OBJECT-TYPE
This field is used in the following card types: serial-ports - IP port number of the target device.
1.3.6.1.4.1.994.3.4.7.23.1.73Integer32read-writecurrent
pSlot6IOFormat
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - The io format of discrete inputs. discrete-outputs - The io format of discrete outputs. serial-ports - The io format of serial ports. onboard-sensors - The io format of onboard sensors. analog-Inputs - The io format of analog inputs. analog-Sensors - The io format of analog sensors.
1.3.6.1.4.1.994.3.4.7.23.1.75IOFormatread-onlycurrent
pSlot6PortType
OBJECT-TYPE
This field is used in the following card types: serial-ports - The type of serial port.
1.3.6.1.4.1.994.3.4.7.23.1.76PortTyperead-onlycurrent
pSlot6TL1SID
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.23.1.116DescriptionStringread-writecurrent
pSlot6TL1COND
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.23.1.117DescriptionStringread-writecurrent
pSlot6TL1Eqpt
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.23.1.118DescriptionStringread-writecurrent
pSlot6TL1Env
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.23.1.119Booleanread-writecurrent
pSlot6TL1Srveff
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.23.1.120TL1Srveffread-writecurrent
pSlot6TL1Locn
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.23.1.121TL1Locnread-writecurrent
pSlot6TL1Dirn
OBJECT-TYPE
This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors -
1.3.6.1.4.1.994.3.4.7.23.1.122TL1Dirnread-writecurrent
pSlot6SensorType
OBJECT-TYPE
This field is used in the following card types: onboard-sensors - The type of sensor. analog-Inputs - The type of sensor. analog-Sensors - The type of sensor.
1.3.6.1.4.1.994.3.4.7.23.1.131SensorTyperead-onlycurrent
pSlot6Index
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.23.1.999Integer32 (1..32)read-onlycurrent
pNetPortsTable
OBJECT-TYPE
Table for configuration of NetPorts
1.3.6.1.4.1.994.3.4.7.24not-accessiblecurrent
pNetPortsEntry
OBJECT-TYPE
Entry for configuration table of NetPorts
1.3.6.1.4.1.994.3.4.7.24.1not-accessiblecurrent
pNetPortsDescription
OBJECT-TYPE
Description of the static network ports.
1.3.6.1.4.1.994.3.4.7.24.1.3DescriptionStringread-onlycurrent
pNetPortsReadPeriod
OBJECT-TYPE
Inactivity timeout (in minutes).
1.3.6.1.4.1.994.3.4.7.24.1.23Integer32read-writecurrent
pNetPortsIPPortNum
OBJECT-TYPE
IP port number to use when connecting to this network port.
1.3.6.1.4.1.994.3.4.7.24.1.73Integer32read-writecurrent
pNetPortsIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.24.1.999Integer32 (1..5)read-onlycurrent
wirelessModem
OBJECT-IDENTITY
1.3.6.1.4.1.994.3.4.7.25
wirelessModemBackupIPAddress
OBJECT-TYPE
Wireless Modem IP Address.
1.3.6.1.4.1.994.3.4.7.25.78IpAddressread-onlycurrent
wirelessModemTime
OBJECT-TYPE
Wireless modem 24 hour reset time (hh:mm:ss)
1.3.6.1.4.1.994.3.4.7.25.81DescriptionStringread-writecurrent
wirelessModemTransmit
OBJECT-TYPE
The string that will be sent to the modem.
1.3.6.1.4.1.994.3.4.7.25.96DescriptionStringread-writecurrent
wirelessModemUseWirelessNetwork
OBJECT-TYPE
Determines if modem tries to connect to wireless network.
1.3.6.1.4.1.994.3.4.7.25.97Booleanread-writecurrent
wirelessModemUseResetTime
OBJECT-TYPE
Determines if the modem resets at reset time.
1.3.6.1.4.1.994.3.4.7.25.98Booleanread-writecurrent
wirelessModemResponseWaitTime
OBJECT-TYPE
Response Timeout (s)
1.3.6.1.4.1.994.3.4.7.25.99DescriptionStringread-writecurrent
wirelessModemSecondary
OBJECT-TYPE
Determines if the modem can use accept a dynamic (local) IP.
1.3.6.1.4.1.994.3.4.7.25.115Booleanread-writecurrent
webmonSecurity
OBJECT-IDENTITY
1.3.6.1.4.1.994.3.4.7.26
webmonSecurityUserLevel
OBJECT-TYPE
This is the default user level. Anyone who has access to this device will have these permissions without logging in. One of the following masks from each group are used: No FTP access 0x0000 0 FTP read-only 0x0001 1 FTP Full access 0x0003 3 No Web access 0x0000 0 Monitor 0x0010 16 Config 0x0030 48 Config + Accounts 0x00B0 176 The masks are added together to create a permission value.
1.3.6.1.4.1.994.3.4.7.26.55Unsigned32read-writecurrent
webmonSecurityUnsecured
OBJECT-TYPE
Allow unsecured configuration for SNMP.
1.3.6.1.4.1.994.3.4.7.26.77Booleanread-writecurrent
dateTime
OBJECT-IDENTITY
1.3.6.1.4.1.994.3.4.7.27
dateTimeConfigured
OBJECT-TYPE
Determines whether or not NTP will be used to set system time.
1.3.6.1.4.1.994.3.4.7.27.10Configuredread-writecurrent
dateTimeIpAddress
OBJECT-TYPE
Time Server IP Address
1.3.6.1.4.1.994.3.4.7.27.14IpAddressread-writecurrent
dateTimeDaylightSaving
OBJECT-TYPE
Determines if Daylight Savings is automatically adjusted.
1.3.6.1.4.1.994.3.4.7.27.53Booleanread-writecurrent
dateTimeDate
OBJECT-TYPE
This is the system date.
1.3.6.1.4.1.994.3.4.7.27.80DescriptionStringread-writecurrent
dateTimeTime
OBJECT-TYPE
This is the system time.
1.3.6.1.4.1.994.3.4.7.27.81DescriptionStringread-writecurrent
dateTimeNegOffset
OBJECT-TYPE
True if a negative offset from UTC is desired
1.3.6.1.4.1.994.3.4.7.27.88Booleanread-writecurrent
dateTimeUTCOffset
OBJECT-TYPE
Time offset of local time compared to UTC
1.3.6.1.4.1.994.3.4.7.27.89DescriptionStringread-writecurrent
pDCMProtocolTable
OBJECT-TYPE
Table for configuration of DCMProtocol
1.3.6.1.4.1.994.3.4.7.28not-accessiblecurrent
pDCMProtocolEntry
OBJECT-TYPE
Entry for configuration table of DCMProtocol
1.3.6.1.4.1.994.3.4.7.28.1not-accessiblecurrent
pDCMProtocolDescription
OBJECT-TYPE
Description of the input device that DCM will poll.
1.3.6.1.4.1.994.3.4.7.28.1.3DescriptionStringread-onlycurrent
pDCMProtocolConfigured
OBJECT-TYPE
If set to true, this input will be polled in DCM. If set to false, it will not be polled.
1.3.6.1.4.1.994.3.4.7.28.1.10Configuredread-writecurrent
pDCMProtocolBaseDCMAddress
OBJECT-TYPE
Base DCM address for this input device.
1.3.6.1.4.1.994.3.4.7.28.1.83Integer32read-writecurrent
pDCMProtocolIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.28.1.999Integer32 (1..27)read-onlycurrent
pdialOutTable
OBJECT-TYPE
Table for configuration of dialOut
1.3.6.1.4.1.994.3.4.7.29not-accessiblecurrent
pdialOutEntry
OBJECT-TYPE
Entry for configuration table of dialOut
1.3.6.1.4.1.994.3.4.7.29.1not-accessiblecurrent
pdialOutConfigured
OBJECT-TYPE
Determines whether or not dial ou will be used to send SNMP traps.
1.3.6.1.4.1.994.3.4.7.29.1.10Configuredread-writecurrent
pdialOutName
OBJECT-TYPE
Dial out Username
1.3.6.1.4.1.994.3.4.7.29.1.25DescriptionStringread-writecurrent
pdialOutPassword
OBJECT-TYPE
Password to use when dialing out
1.3.6.1.4.1.994.3.4.7.29.1.26DescriptionStringread-writecurrent
pdialOutDialOutNumber
OBJECT-TYPE
Number to dial for dial out
1.3.6.1.4.1.994.3.4.7.29.1.79DescriptionStringread-writecurrent
pdialOutIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.29.1.999Integer32 (1..4)read-onlycurrent
pderivedDiscreteTable
OBJECT-TYPE
Table for configuration of derivedDiscrete
1.3.6.1.4.1.994.3.4.7.30not-accessiblecurrent
pderivedDiscreteEntry
OBJECT-TYPE
Entry for configuration table of derivedDiscrete
1.3.6.1.4.1.994.3.4.7.30.1not-accessiblecurrent
pderivedDiscreteDescription
OBJECT-TYPE
Description of the derived alarm point.
1.3.6.1.4.1.994.3.4.7.30.1.3DescriptionStringread-writecurrent
pderivedDiscreteDesc0
OBJECT-TYPE
Description of the off state.
1.3.6.1.4.1.994.3.4.7.30.1.4DescriptionStringread-writecurrent
pderivedDiscreteDesc1
OBJECT-TYPE
Description of the on state.
1.3.6.1.4.1.994.3.4.7.30.1.5DescriptionStringread-writecurrent
pderivedDiscreteConfigured
OBJECT-TYPE
If set to true, changes of state will be reported. If set to false, not change of states will be reported.
1.3.6.1.4.1.994.3.4.7.30.1.10Configuredread-writecurrent
pderivedDiscreteSendEmail
OBJECT-TYPE
If set to true, an email will be sent on a change of state. If false, no email will be sent.
1.3.6.1.4.1.994.3.4.7.30.1.11Booleanread-writecurrent
pderivedDiscreteSendSNMPTrap
OBJECT-TYPE
If set to true, an SNMP trap will be sent on a change of state. If false, no SNMP trap will be sent.
1.3.6.1.4.1.994.3.4.7.30.1.12Booleanread-writecurrent
pderivedDiscreteLevel0
OBJECT-TYPE
Level of the off state.
1.3.6.1.4.1.994.3.4.7.30.1.17Levelread-writecurrent
pderivedDiscreteLevel1
OBJECT-TYPE
Level of the on state.
1.3.6.1.4.1.994.3.4.7.30.1.18Levelread-writecurrent
pderivedDiscreteLiveDescription
OBJECT-TYPE
The current description of the alarm state.
1.3.6.1.4.1.994.3.4.7.30.1.64DescriptionStringread-onlycurrent
pderivedDiscreteLiveLevel
OBJECT-TYPE
The current level of the alarm.
1.3.6.1.4.1.994.3.4.7.30.1.65DescriptionStringread-onlycurrent
pderivedDiscreteLiveTime
OBJECT-TYPE
The time of the last change of state.
1.3.6.1.4.1.994.3.4.7.30.1.67DescriptionStringread-onlycurrent
pderivedDiscreteElementAPkg
OBJECT-TYPE
Package where the alarm point is located for element A.
1.3.6.1.4.1.994.3.4.7.30.1.90Integer32read-writecurrent
pderivedDiscreteElementAPoint
OBJECT-TYPE
Alarm point for element A.
1.3.6.1.4.1.994.3.4.7.30.1.91Integer32read-writecurrent
pderivedDiscreteElementBPkg
OBJECT-TYPE
Package where the alarm point is located for element B.
1.3.6.1.4.1.994.3.4.7.30.1.92Integer32read-writecurrent
pderivedDiscreteElementBPoint
OBJECT-TYPE
Alarm point for element B.
1.3.6.1.4.1.994.3.4.7.30.1.93Integer32read-writecurrent
pderivedDiscreteDiscreteFormula
OBJECT-TYPE
The formula that will be used to compute the derived alarm.
1.3.6.1.4.1.994.3.4.7.30.1.94DiscreteFormularead-writecurrent
pderivedDiscreteTL1SID
OBJECT-TYPE
(TL1) System ID associated with this item.
1.3.6.1.4.1.994.3.4.7.30.1.116DescriptionStringread-writecurrent
pderivedDiscreteTL1COND
OBJECT-TYPE
(TL1) Condition text associated with this item.
1.3.6.1.4.1.994.3.4.7.30.1.117DescriptionStringread-writecurrent
pderivedDiscreteTL1Eqpt
OBJECT-TYPE
(TL1) EQPT field associated with this item.
1.3.6.1.4.1.994.3.4.7.30.1.118DescriptionStringread-writecurrent
pderivedDiscreteTL1Env
OBJECT-TYPE
(TL1) Environmental field associated with this item.
1.3.6.1.4.1.994.3.4.7.30.1.119Booleanread-writecurrent
pderivedDiscreteTL1Srveff
OBJECT-TYPE
(TL1) Service Effecting field associated with this item.
1.3.6.1.4.1.994.3.4.7.30.1.120TL1Srveffread-writecurrent
pderivedDiscreteTL1Locn
OBJECT-TYPE
(TL1) Location field associated with this item.
1.3.6.1.4.1.994.3.4.7.30.1.121TL1Locnread-writecurrent
pderivedDiscreteTL1Dirn
OBJECT-TYPE
(TL1) Direction field associated with this item.
1.3.6.1.4.1.994.3.4.7.30.1.122TL1Dirnread-writecurrent
pderivedDiscreteIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.30.1.999Integer32 (1..16)read-onlycurrent
license
OBJECT-IDENTITY
1.3.6.1.4.1.994.3.4.7.31
licenseDescription
OBJECT-TYPE
This describes the status of the license
1.3.6.1.4.1.994.3.4.7.31.3DescriptionStringread-onlycurrent
licenseLicenseKey
OBJECT-TYPE
This is the License Key.
1.3.6.1.4.1.994.3.4.7.31.84DescriptionStringread-writecurrent
licenseExpires
OBJECT-TYPE
This is the date the current License will expire.
1.3.6.1.4.1.994.3.4.7.31.85DescriptionStringread-onlycurrent
licenseAllowTL1
OBJECT-TYPE
This describes the status of TL1 support in the license
1.3.6.1.4.1.994.3.4.7.31.124Booleanread-onlycurrent
pe2aHostTable
OBJECT-TYPE
Table for configuration of e2aHost
1.3.6.1.4.1.994.3.4.7.32not-accessiblecurrent
pe2aHostEntry
OBJECT-TYPE
Entry for configuration table of e2aHost
1.3.6.1.4.1.994.3.4.7.32.1not-accessiblecurrent
pe2aHostDescription
OBJECT-TYPE
Description of the connection.
1.3.6.1.4.1.994.3.4.7.32.1.3DescriptionStringread-writecurrent
pe2aHostConfigured
OBJECT-TYPE
If set to true, this route will be used by E2A.
1.3.6.1.4.1.994.3.4.7.32.1.10Configuredread-writecurrent
pe2aHostIpAddress
OBJECT-TYPE
The IP address of the remote device.
1.3.6.1.4.1.994.3.4.7.32.1.14IpAddressread-writecurrent
pe2aHostLevel0
OBJECT-TYPE
Alarm level associated with the online state.
1.3.6.1.4.1.994.3.4.7.32.1.17Levelread-writecurrent
pe2aHostLevel1
OBJECT-TYPE
Alarm level associated with the offline state.
1.3.6.1.4.1.994.3.4.7.32.1.18Levelread-writecurrent
pe2aHostLevel2
OBJECT-TYPE
Alarm level associated with the connecting state.
1.3.6.1.4.1.994.3.4.7.32.1.19Levelread-writecurrent
pe2aHostRosterID
OBJECT-TYPE
Serial port number to use when connecting to WebMon.
1.3.6.1.4.1.994.3.4.7.32.1.37Integer32read-writecurrent
pe2aHostPollAddress
OBJECT-TYPE
The E2A address of the remote device.
1.3.6.1.4.1.994.3.4.7.32.1.56Integer32read-writecurrent
pe2aHostIPPortNum
OBJECT-TYPE
IP port number to use when connecting to the remote device.
1.3.6.1.4.1.994.3.4.7.32.1.73Integer32read-writecurrent
pe2aHostTL1SID
OBJECT-TYPE
(TL1) System ID associated with this item.
1.3.6.1.4.1.994.3.4.7.32.1.116DescriptionStringread-writecurrent
pe2aHostTL1COND
OBJECT-TYPE
(TL1) Condition text associated with this item.
1.3.6.1.4.1.994.3.4.7.32.1.117DescriptionStringread-writecurrent
pe2aHostTL1Eqpt
OBJECT-TYPE
(TL1) EQPT field associated with this item.
1.3.6.1.4.1.994.3.4.7.32.1.118DescriptionStringread-writecurrent
pe2aHostTL1Env
OBJECT-TYPE
(TL1) Environmental field associated with this item.
1.3.6.1.4.1.994.3.4.7.32.1.119Booleanread-writecurrent
pe2aHostTL1Srveff
OBJECT-TYPE
(TL1) Service Effecting field associated with this item.
1.3.6.1.4.1.994.3.4.7.32.1.120TL1Srveffread-writecurrent
pe2aHostTL1Locn
OBJECT-TYPE
(TL1) Location field associated with this item.
1.3.6.1.4.1.994.3.4.7.32.1.121TL1Locnread-writecurrent
pe2aHostTL1Dirn
OBJECT-TYPE
(TL1) Direction field associated with this item.
1.3.6.1.4.1.994.3.4.7.32.1.122TL1Dirnread-writecurrent
pe2aHostIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.32.1.999Integer32 (1..256)read-onlycurrent
pderivedAnalogTable
OBJECT-TYPE
Table for configuration of derivedAnalog
1.3.6.1.4.1.994.3.4.7.33not-accessiblecurrent
pderivedAnalogEntry
OBJECT-TYPE
Entry for configuration table of derivedAnalog
1.3.6.1.4.1.994.3.4.7.33.1not-accessiblecurrent
pderivedAnalogDescription
OBJECT-TYPE
Description of the derived alarm point.
1.3.6.1.4.1.994.3.4.7.33.1.3DescriptionStringread-writecurrent
pderivedAnalogDesc0
OBJECT-TYPE
The description for derived values between threshold 0 and threshold 1.
1.3.6.1.4.1.994.3.4.7.33.1.4DescriptionStringread-writecurrent
pderivedAnalogDesc1
OBJECT-TYPE
The description for derived values between threshold 1 and threshold 2.
1.3.6.1.4.1.994.3.4.7.33.1.5DescriptionStringread-writecurrent
pderivedAnalogDesc2
OBJECT-TYPE
The description for derived values between threshold 2 and threshold 3.
1.3.6.1.4.1.994.3.4.7.33.1.6DescriptionStringread-writecurrent
pderivedAnalogDesc3
OBJECT-TYPE
The description for derived values between threshold 3 and threshold 4.
1.3.6.1.4.1.994.3.4.7.33.1.7DescriptionStringread-writecurrent
pderivedAnalogDesc4
OBJECT-TYPE
The description for derived values between threshold 4 and threshold 5.
1.3.6.1.4.1.994.3.4.7.33.1.8DescriptionStringread-writecurrent
pderivedAnalogConfigured
OBJECT-TYPE
If set to true, changes of state will be reported. If set to false, not change of states will be reported.
1.3.6.1.4.1.994.3.4.7.33.1.10Configuredread-writecurrent
pderivedAnalogSendEmail
OBJECT-TYPE
If set to true, an email will be sent on a change of state. If false, no email will be sent.
1.3.6.1.4.1.994.3.4.7.33.1.11Booleanread-writecurrent
pderivedAnalogSendSNMPTrap
OBJECT-TYPE
If set to true, an SNMP trap will be sent on a change of state. If false, no SNMP trap will be sent.
1.3.6.1.4.1.994.3.4.7.33.1.12Booleanread-writecurrent
pderivedAnalogLevel0
OBJECT-TYPE
The level for derived values between threshold 0 and threshold 1.
1.3.6.1.4.1.994.3.4.7.33.1.17Levelread-writecurrent
pderivedAnalogLevel1
OBJECT-TYPE
The level for derived values between threshold 1 and threshold 2.
1.3.6.1.4.1.994.3.4.7.33.1.18Levelread-writecurrent
pderivedAnalogLevel2
OBJECT-TYPE
The level for derived values between threshold 2 and threshold 3.
1.3.6.1.4.1.994.3.4.7.33.1.19Levelread-writecurrent
pderivedAnalogLevel3
OBJECT-TYPE
The level for derived values between threshold 3 and threshold 4.
1.3.6.1.4.1.994.3.4.7.33.1.20Levelread-writecurrent
pderivedAnalogLevel4
OBJECT-TYPE
The level for derived values between threshold 4 and threshold 5.
1.3.6.1.4.1.994.3.4.7.33.1.21Levelread-writecurrent
pderivedAnalogThresh0
OBJECT-TYPE
This is the maximum analog derived value.
1.3.6.1.4.1.994.3.4.7.33.1.28DescriptionStringread-writecurrent
pderivedAnalogThresh1
OBJECT-TYPE
This is the first threshold derived value.
1.3.6.1.4.1.994.3.4.7.33.1.29DescriptionStringread-writecurrent
pderivedAnalogThresh2
OBJECT-TYPE
This is the second threshold derived value.
1.3.6.1.4.1.994.3.4.7.33.1.30DescriptionStringread-writecurrent
pderivedAnalogThresh3
OBJECT-TYPE
This is the third threshold derived value.
1.3.6.1.4.1.994.3.4.7.33.1.31DescriptionStringread-writecurrent
pderivedAnalogThresh4
OBJECT-TYPE
This is the fourth threshold derived value.
1.3.6.1.4.1.994.3.4.7.33.1.32DescriptionStringread-writecurrent
pderivedAnalogThresh5
OBJECT-TYPE
This is the minimum threshold derived value.
1.3.6.1.4.1.994.3.4.7.33.1.33DescriptionStringread-writecurrent
pderivedAnalogUnits
OBJECT-TYPE
Description of the units of measurement.
1.3.6.1.4.1.994.3.4.7.33.1.46DescriptionStringread-writecurrent
pderivedAnalogLiveDescription
OBJECT-TYPE
The current description of the alarm state.
1.3.6.1.4.1.994.3.4.7.33.1.64DescriptionStringread-onlycurrent
pderivedAnalogLiveLevel
OBJECT-TYPE
The current level of the alarm.
1.3.6.1.4.1.994.3.4.7.33.1.65DescriptionStringread-onlycurrent
pderivedAnalogLiveRaw
OBJECT-TYPE
The current derived reading from the analog devices. This value will alwaysbe between the threshold 0 and threshold 5 values.
1.3.6.1.4.1.994.3.4.7.33.1.66DescriptionStringread-onlycurrent
pderivedAnalogLiveTime
OBJECT-TYPE
The time of the last change of state.
1.3.6.1.4.1.994.3.4.7.33.1.67DescriptionStringread-onlycurrent
pderivedAnalogElementAPkg
OBJECT-TYPE
Package where the alarm point is located for element A.
1.3.6.1.4.1.994.3.4.7.33.1.90Integer32read-writecurrent
pderivedAnalogElementAPoint
OBJECT-TYPE
Alarm point for element A.
1.3.6.1.4.1.994.3.4.7.33.1.91Integer32read-writecurrent
pderivedAnalogElementBPkg
OBJECT-TYPE
Package where the alarm point is located for element B.
1.3.6.1.4.1.994.3.4.7.33.1.92Integer32read-writecurrent
pderivedAnalogElementBPoint
OBJECT-TYPE
Alarm point for element B.
1.3.6.1.4.1.994.3.4.7.33.1.93Integer32read-writecurrent
pderivedAnalogFormula
OBJECT-TYPE
The formula that will be used to compute the derived alarm.
1.3.6.1.4.1.994.3.4.7.33.1.95DescriptionStringread-writecurrent
pderivedAnalogTL1SID
OBJECT-TYPE
(TL1) System ID associated with this item.
1.3.6.1.4.1.994.3.4.7.33.1.116DescriptionStringread-writecurrent
pderivedAnalogTL1COND
OBJECT-TYPE
(TL1) Condition text associated with this item.
1.3.6.1.4.1.994.3.4.7.33.1.117DescriptionStringread-writecurrent
pderivedAnalogTL1Eqpt
OBJECT-TYPE
(TL1) EQPT field associated with this item.
1.3.6.1.4.1.994.3.4.7.33.1.118DescriptionStringread-writecurrent
pderivedAnalogTL1Env
OBJECT-TYPE
(TL1) Environmental field associated with this item.
1.3.6.1.4.1.994.3.4.7.33.1.119Booleanread-writecurrent
pderivedAnalogTL1Srveff
OBJECT-TYPE
(TL1) Service Effecting field associated with this item.
1.3.6.1.4.1.994.3.4.7.33.1.120TL1Srveffread-writecurrent
pderivedAnalogTL1Locn
OBJECT-TYPE
(TL1) Location field associated with this item.
1.3.6.1.4.1.994.3.4.7.33.1.121TL1Locnread-writecurrent
pderivedAnalogTL1Dirn
OBJECT-TYPE
(TL1) Direction field associated with this item.
1.3.6.1.4.1.994.3.4.7.33.1.122TL1Dirnread-writecurrent
pderivedAnalogIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.33.1.999Integer32 (1..24)read-onlycurrent
pgpsTable
OBJECT-TYPE
Table for configuration of gps
1.3.6.1.4.1.994.3.4.7.34not-accessiblecurrent
pgpsEntry
OBJECT-TYPE
Entry for configuration table of gps
1.3.6.1.4.1.994.3.4.7.34.1not-accessiblecurrent
pgpsDescription
OBJECT-TYPE
Description of the onboard device.
1.3.6.1.4.1.994.3.4.7.34.1.3DescriptionStringread-onlycurrent
pgpsDesc0
OBJECT-TYPE
The description for values between threshold 0 and threshold 1.
1.3.6.1.4.1.994.3.4.7.34.1.4DescriptionStringread-writecurrent
pgpsDesc1
OBJECT-TYPE
The description for values between threshold 1 and threshold 2.
1.3.6.1.4.1.994.3.4.7.34.1.5DescriptionStringread-writecurrent
pgpsDesc2
OBJECT-TYPE
The description for values between threshold 2 and threshold 3.
1.3.6.1.4.1.994.3.4.7.34.1.6DescriptionStringread-writecurrent
pgpsDesc3
OBJECT-TYPE
The description for values between threshold 3 and threshold 4.
1.3.6.1.4.1.994.3.4.7.34.1.7DescriptionStringread-writecurrent
pgpsDesc4
OBJECT-TYPE
The description for values between threshold 4 and threshold 5.
1.3.6.1.4.1.994.3.4.7.34.1.8DescriptionStringread-writecurrent
pgpsConfigured
OBJECT-TYPE
If set to true, the onboard sensors will be used. If set to false the will be ignored.
1.3.6.1.4.1.994.3.4.7.34.1.10Configuredread-writecurrent
pgpsSendEmail
OBJECT-TYPE
If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent.
1.3.6.1.4.1.994.3.4.7.34.1.11Booleanread-writecurrent
pgpsSendSNMPTrap
OBJECT-TYPE
If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent.
1.3.6.1.4.1.994.3.4.7.34.1.12Booleanread-writecurrent
pgpsLevel0
OBJECT-TYPE
The level for values between threshold 0 and threshold 1.
1.3.6.1.4.1.994.3.4.7.34.1.17Levelread-writecurrent
pgpsLevel1
OBJECT-TYPE
The level for values between threshold 1 and threshold 2.
1.3.6.1.4.1.994.3.4.7.34.1.18Levelread-writecurrent
pgpsLevel2
OBJECT-TYPE
The level for values between threshold 2 and threshold 3.
1.3.6.1.4.1.994.3.4.7.34.1.19Levelread-writecurrent
pgpsLevel3
OBJECT-TYPE
The level for values between threshold 3 and threshold 4.
1.3.6.1.4.1.994.3.4.7.34.1.20Levelread-writecurrent
pgpsLevel4
OBJECT-TYPE
The level for values between threshold 4 and threshold 5.
1.3.6.1.4.1.994.3.4.7.34.1.21Levelread-writecurrent
pgpsThresh0
OBJECT-TYPE
This is the minimun analog value.
1.3.6.1.4.1.994.3.4.7.34.1.28DescriptionStringread-onlycurrent
pgpsThresh1
OBJECT-TYPE
This is the first threshold value.
1.3.6.1.4.1.994.3.4.7.34.1.29DescriptionStringread-writecurrent
pgpsThresh2
OBJECT-TYPE
This is the second threshold value.
1.3.6.1.4.1.994.3.4.7.34.1.30DescriptionStringread-writecurrent
pgpsThresh3
OBJECT-TYPE
This is the third threshold value.
1.3.6.1.4.1.994.3.4.7.34.1.31DescriptionStringread-writecurrent
pgpsThresh4
OBJECT-TYPE
This is the fourth threshold value.
1.3.6.1.4.1.994.3.4.7.34.1.32DescriptionStringread-writecurrent
pgpsThresh5
OBJECT-TYPE
This is the maximum threshold value.
1.3.6.1.4.1.994.3.4.7.34.1.33DescriptionStringread-onlycurrent
pgpsUnits
OBJECT-TYPE
Description of the units of measurement.
1.3.6.1.4.1.994.3.4.7.34.1.46DescriptionStringread-onlycurrent
pgpsLiveDescription
OBJECT-TYPE
The description of the current state of the onboard sensor
1.3.6.1.4.1.994.3.4.7.34.1.64DescriptionStringread-onlycurrent
pgpsLiveLevel
OBJECT-TYPE
The level of the current state of the onboard sensor.
1.3.6.1.4.1.994.3.4.7.34.1.65DescriptionStringread-onlycurrent
pgpsLiveRaw
OBJECT-TYPE
The current reading from the onboard sensor. This value will always be between the threshold 0 and threshold 5 values.
1.3.6.1.4.1.994.3.4.7.34.1.66DescriptionStringread-onlycurrent
pgpsLiveTime
OBJECT-TYPE
The time of the last event.
1.3.6.1.4.1.994.3.4.7.34.1.67DescriptionStringread-onlycurrent
pgpsTL1SID
OBJECT-TYPE
(TL1) System ID associated with this item.
1.3.6.1.4.1.994.3.4.7.34.1.116DescriptionStringread-writecurrent
pgpsTL1COND
OBJECT-TYPE
(TL1) Condition text associated with this item.
1.3.6.1.4.1.994.3.4.7.34.1.117DescriptionStringread-writecurrent
pgpsTL1Eqpt
OBJECT-TYPE
(TL1) EQPT field associated with this item.
1.3.6.1.4.1.994.3.4.7.34.1.118DescriptionStringread-writecurrent
pgpsTL1Env
OBJECT-TYPE
(TL1) Environmental field associated with this item.
1.3.6.1.4.1.994.3.4.7.34.1.119Booleanread-writecurrent
pgpsTL1Srveff
OBJECT-TYPE
(TL1) Service Effecting field associated with this item.
1.3.6.1.4.1.994.3.4.7.34.1.120TL1Srveffread-writecurrent
pgpsTL1Locn
OBJECT-TYPE
(TL1) Location field associated with this item.
1.3.6.1.4.1.994.3.4.7.34.1.121TL1Locnread-writecurrent
pgpsTL1Dirn
OBJECT-TYPE
(TL1) Direction field associated with this item.
1.3.6.1.4.1.994.3.4.7.34.1.122TL1Dirnread-writecurrent
pgpsIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.34.1.999Integer32 (1..3)read-onlycurrent
pportRedirectTable
OBJECT-TYPE
Table for configuration of portRedirect
1.3.6.1.4.1.994.3.4.7.35not-accessiblecurrent
pportRedirectEntry
OBJECT-TYPE
Entry for configuration table of portRedirect
1.3.6.1.4.1.994.3.4.7.35.1not-accessiblecurrent
pportRedirectDescription
OBJECT-TYPE
Description of the connection.
1.3.6.1.4.1.994.3.4.7.35.1.3DescriptionStringread-writecurrent
pportRedirectConfigured
OBJECT-TYPE
If set to true, this route will be allowed.
1.3.6.1.4.1.994.3.4.7.35.1.10Configuredread-writecurrent
pportRedirectIpAddress
OBJECT-TYPE
The IP address of the remote device.
1.3.6.1.4.1.994.3.4.7.35.1.14IpAddressread-writecurrent
pportRedirectReadPeriod
OBJECT-TYPE
Inactivity timeout (in minutes).
1.3.6.1.4.1.994.3.4.7.35.1.23Integer32read-writecurrent
pportRedirectRosterID
OBJECT-TYPE
IP port number to use when connecting to the remote device.
1.3.6.1.4.1.994.3.4.7.35.1.37Integer32read-writecurrent
pportRedirectIPPortNum
OBJECT-TYPE
IP port number to use when connecting to WebMon.
1.3.6.1.4.1.994.3.4.7.35.1.73Integer32read-writecurrent
pportRedirectIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.35.1.999Integer32 (1..16)read-onlycurrent
pscheduleATable
OBJECT-TYPE
Table for configuration of scheduleA
1.3.6.1.4.1.994.3.4.7.36not-accessiblecurrent
pscheduleAEntry
OBJECT-TYPE
Entry for configuration table of scheduleA
1.3.6.1.4.1.994.3.4.7.36.1not-accessiblecurrent
pscheduleADayOfWeek
OBJECT-TYPE
The day of the week
1.3.6.1.4.1.994.3.4.7.36.1.102DayOfWeekread-onlycurrent
pscheduleAConfiguredState
OBJECT-TYPE
The state of the schedule at the beginning of the day.
1.3.6.1.4.1.994.3.4.7.36.1.103ConfiguredStateread-writecurrent
pscheduleAConfigured1
OBJECT-TYPE
The state of the schedule between time markers 1 and 2.
1.3.6.1.4.1.994.3.4.7.36.1.104ConfiguredStateread-writecurrent
pscheduleAConfigured2
OBJECT-TYPE
The state of the schedule between time markers 2 and 3.
1.3.6.1.4.1.994.3.4.7.36.1.105ConfiguredStateread-writecurrent
pscheduleAConfigured3
OBJECT-TYPE
The state of the schedule between time markers 3 and 4.
1.3.6.1.4.1.994.3.4.7.36.1.106ConfiguredStateread-writecurrent
pscheduleAConfigured4
OBJECT-TYPE
The state of the schedule at the end of the day.
1.3.6.1.4.1.994.3.4.7.36.1.107ConfiguredStateread-writecurrent
pscheduleATime0
OBJECT-TYPE
Time marker 0, the beginning of the day.
1.3.6.1.4.1.994.3.4.7.36.1.108DescriptionStringread-onlycurrent
pscheduleATime1
OBJECT-TYPE
Time marker 1.
1.3.6.1.4.1.994.3.4.7.36.1.109DescriptionStringread-writecurrent
pscheduleATime2
OBJECT-TYPE
Time marker 2.
1.3.6.1.4.1.994.3.4.7.36.1.110DescriptionStringread-writecurrent
pscheduleATime3
OBJECT-TYPE
Time marker 3.
1.3.6.1.4.1.994.3.4.7.36.1.111DescriptionStringread-writecurrent
pscheduleATime4
OBJECT-TYPE
Time marker 4.
1.3.6.1.4.1.994.3.4.7.36.1.112DescriptionStringread-writecurrent
pscheduleATime5
OBJECT-TYPE
Time marker 5, the end of the day.
1.3.6.1.4.1.994.3.4.7.36.1.113DescriptionStringread-onlycurrent
pscheduleAIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.36.1.999Integer32 (1..7)read-onlycurrent
pscheduleBTable
OBJECT-TYPE
Table for configuration of scheduleB
1.3.6.1.4.1.994.3.4.7.37not-accessiblecurrent
pscheduleBEntry
OBJECT-TYPE
Entry for configuration table of scheduleB
1.3.6.1.4.1.994.3.4.7.37.1not-accessiblecurrent
pscheduleBDayOfWeek
OBJECT-TYPE
The day of the week
1.3.6.1.4.1.994.3.4.7.37.1.102DayOfWeekread-onlycurrent
pscheduleBConfiguredState
OBJECT-TYPE
The state of the schedule at the beginning of the day.
1.3.6.1.4.1.994.3.4.7.37.1.103ConfiguredStateread-writecurrent
pscheduleBConfigured1
OBJECT-TYPE
The state of the schedule between time markers 1 and 2.
1.3.6.1.4.1.994.3.4.7.37.1.104ConfiguredStateread-writecurrent
pscheduleBConfigured2
OBJECT-TYPE
The state of the schedule between time markers 2 and 3.
1.3.6.1.4.1.994.3.4.7.37.1.105ConfiguredStateread-writecurrent
pscheduleBConfigured3
OBJECT-TYPE
The state of the schedule between time markers 3 and 4.
1.3.6.1.4.1.994.3.4.7.37.1.106ConfiguredStateread-writecurrent
pscheduleBConfigured4
OBJECT-TYPE
The state of the schedule at the end of the day.
1.3.6.1.4.1.994.3.4.7.37.1.107ConfiguredStateread-writecurrent
pscheduleBTime0
OBJECT-TYPE
Time marker 0, the beginning of the day.
1.3.6.1.4.1.994.3.4.7.37.1.108DescriptionStringread-onlycurrent
pscheduleBTime1
OBJECT-TYPE
Time marker 1.
1.3.6.1.4.1.994.3.4.7.37.1.109DescriptionStringread-writecurrent
pscheduleBTime2
OBJECT-TYPE
Time marker 2.
1.3.6.1.4.1.994.3.4.7.37.1.110DescriptionStringread-writecurrent
pscheduleBTime3
OBJECT-TYPE
Time marker 3.
1.3.6.1.4.1.994.3.4.7.37.1.111DescriptionStringread-writecurrent
pscheduleBTime4
OBJECT-TYPE
Time marker 4.
1.3.6.1.4.1.994.3.4.7.37.1.112DescriptionStringread-writecurrent
pscheduleBTime5
OBJECT-TYPE
Time marker 5, the end of the day.
1.3.6.1.4.1.994.3.4.7.37.1.113DescriptionStringread-onlycurrent
pscheduleBIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.37.1.999Integer32 (1..7)read-onlycurrent
pscheduleCTable
OBJECT-TYPE
Table for configuration of scheduleC
1.3.6.1.4.1.994.3.4.7.38not-accessiblecurrent
pscheduleCEntry
OBJECT-TYPE
Entry for configuration table of scheduleC
1.3.6.1.4.1.994.3.4.7.38.1not-accessiblecurrent
pscheduleCDayOfWeek
OBJECT-TYPE
The day of the week
1.3.6.1.4.1.994.3.4.7.38.1.102DayOfWeekread-onlycurrent
pscheduleCConfiguredState
OBJECT-TYPE
The state of the schedule at the beginning of the day.
1.3.6.1.4.1.994.3.4.7.38.1.103ConfiguredStateread-writecurrent
pscheduleCConfigured1
OBJECT-TYPE
The state of the schedule between time markers 1 and 2.
1.3.6.1.4.1.994.3.4.7.38.1.104ConfiguredStateread-writecurrent
pscheduleCConfigured2
OBJECT-TYPE
The state of the schedule between time markers 2 and 3.
1.3.6.1.4.1.994.3.4.7.38.1.105ConfiguredStateread-writecurrent
pscheduleCConfigured3
OBJECT-TYPE
The state of the schedule between time markers 3 and 4.
1.3.6.1.4.1.994.3.4.7.38.1.106ConfiguredStateread-writecurrent
pscheduleCConfigured4
OBJECT-TYPE
The state of the schedule at the end of the day.
1.3.6.1.4.1.994.3.4.7.38.1.107ConfiguredStateread-writecurrent
pscheduleCTime0
OBJECT-TYPE
Time marker 0, the beginning of the day.
1.3.6.1.4.1.994.3.4.7.38.1.108DescriptionStringread-onlycurrent
pscheduleCTime1
OBJECT-TYPE
Time marker 1.
1.3.6.1.4.1.994.3.4.7.38.1.109DescriptionStringread-writecurrent
pscheduleCTime2
OBJECT-TYPE
Time marker 2.
1.3.6.1.4.1.994.3.4.7.38.1.110DescriptionStringread-writecurrent
pscheduleCTime3
OBJECT-TYPE
Time marker 3.
1.3.6.1.4.1.994.3.4.7.38.1.111DescriptionStringread-writecurrent
pscheduleCTime4
OBJECT-TYPE
Time marker 4.
1.3.6.1.4.1.994.3.4.7.38.1.112DescriptionStringread-writecurrent
pscheduleCTime5
OBJECT-TYPE
Time marker 5, the end of the day.
1.3.6.1.4.1.994.3.4.7.38.1.113DescriptionStringread-onlycurrent
pscheduleCIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.38.1.999Integer32 (1..7)read-onlycurrent
pscheduleDTable
OBJECT-TYPE
Table for configuration of scheduleD
1.3.6.1.4.1.994.3.4.7.39not-accessiblecurrent
pscheduleDEntry
OBJECT-TYPE
Entry for configuration table of scheduleD
1.3.6.1.4.1.994.3.4.7.39.1not-accessiblecurrent
pscheduleDDayOfWeek
OBJECT-TYPE
The day of the week
1.3.6.1.4.1.994.3.4.7.39.1.102DayOfWeekread-onlycurrent
pscheduleDConfiguredState
OBJECT-TYPE
The state of the schedule at the beginning of the day.
1.3.6.1.4.1.994.3.4.7.39.1.103ConfiguredStateread-writecurrent
pscheduleDConfigured1
OBJECT-TYPE
The state of the schedule between time markers 1 and 2.
1.3.6.1.4.1.994.3.4.7.39.1.104ConfiguredStateread-writecurrent
pscheduleDConfigured2
OBJECT-TYPE
The state of the schedule between time markers 2 and 3.
1.3.6.1.4.1.994.3.4.7.39.1.105ConfiguredStateread-writecurrent
pscheduleDConfigured3
OBJECT-TYPE
The state of the schedule between time markers 3 and 4.
1.3.6.1.4.1.994.3.4.7.39.1.106ConfiguredStateread-writecurrent
pscheduleDConfigured4
OBJECT-TYPE
The state of the schedule at the end of the day.
1.3.6.1.4.1.994.3.4.7.39.1.107ConfiguredStateread-writecurrent
pscheduleDTime0
OBJECT-TYPE
Time marker 0, the beginning of the day.
1.3.6.1.4.1.994.3.4.7.39.1.108DescriptionStringread-onlycurrent
pscheduleDTime1
OBJECT-TYPE
Time marker 1.
1.3.6.1.4.1.994.3.4.7.39.1.109DescriptionStringread-writecurrent
pscheduleDTime2
OBJECT-TYPE
Time marker 2.
1.3.6.1.4.1.994.3.4.7.39.1.110DescriptionStringread-writecurrent
pscheduleDTime3
OBJECT-TYPE
Time marker 3.
1.3.6.1.4.1.994.3.4.7.39.1.111DescriptionStringread-writecurrent
pscheduleDTime4
OBJECT-TYPE
Time marker 4.
1.3.6.1.4.1.994.3.4.7.39.1.112DescriptionStringread-writecurrent
pscheduleDTime5
OBJECT-TYPE
Time marker 5, the end of the day.
1.3.6.1.4.1.994.3.4.7.39.1.113DescriptionStringread-onlycurrent
pscheduleDIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.39.1.999Integer32 (1..7)read-onlycurrent
tl1Settings
OBJECT-IDENTITY
1.3.6.1.4.1.994.3.4.7.40
tl1SettingsTL1Issue
OBJECT-TYPE
(TL1) TL1 issue associated with this device.
1.3.6.1.4.1.994.3.4.7.40.123TL1Issueread-writecurrent
pDCPFProtocolTable
OBJECT-TYPE
Table for configuration of DCPFProtocol
1.3.6.1.4.1.994.3.4.7.41not-accessiblecurrent
pDCPFProtocolEntry
OBJECT-TYPE
Entry for configuration table of DCPFProtocol
1.3.6.1.4.1.994.3.4.7.41.1not-accessiblecurrent
pDCPFProtocolDescription
OBJECT-TYPE
Description of the input device that DCPF will poll.
1.3.6.1.4.1.994.3.4.7.41.1.3DescriptionStringread-onlycurrent
pDCPFProtocolConfigured
OBJECT-TYPE
If set to true, this input will be polled in DCPF. If set to false, it will not be polled.
1.3.6.1.4.1.994.3.4.7.41.1.10Configuredread-writecurrent
pDCPFProtocolBaseDCPFDisplay
OBJECT-TYPE
Base DCPF display for this input device.
1.3.6.1.4.1.994.3.4.7.41.1.127Integer32read-writecurrent
pDCPFProtocolIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.41.1.999Integer32 (1..27)read-onlycurrent
dcpfSettings
OBJECT-IDENTITY
1.3.6.1.4.1.994.3.4.7.42
dcpfSettingsDCPFAddress
OBJECT-TYPE
Base DCPF Address.
1.3.6.1.4.1.994.3.4.7.42.128Integer32read-writecurrent
pTABSProtocolTable
OBJECT-TYPE
Table for configuration of TABSProtocol
1.3.6.1.4.1.994.3.4.7.43not-accessiblecurrent
pTABSProtocolEntry
OBJECT-TYPE
Entry for configuration table of TABSProtocol
1.3.6.1.4.1.994.3.4.7.43.1not-accessiblecurrent
pTABSProtocolDescription
OBJECT-TYPE
Description of the input device that TABS will poll.
1.3.6.1.4.1.994.3.4.7.43.1.3DescriptionStringread-onlycurrent
pTABSProtocolConfigured
OBJECT-TYPE
If set to true, this input will be polled in TABS. If set to false, it will not be polled.
1.3.6.1.4.1.994.3.4.7.43.1.10Configuredread-writecurrent
pTABSProtocolBaseTABSDisplay
OBJECT-TYPE
Base TABS display for this input device.
1.3.6.1.4.1.994.3.4.7.43.1.129Integer32read-writecurrent
pTABSProtocolIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.43.1.999Integer32 (1..27)read-onlycurrent
tabsSettings
OBJECT-IDENTITY
1.3.6.1.4.1.994.3.4.7.44
tabsSettingsTABSAddress
OBJECT-TYPE
Base TABS Address.
1.3.6.1.4.1.994.3.4.7.44.130Integer32read-writecurrent
psnmpCommandsTable
OBJECT-TYPE
Table for configuration of snmpCommands
1.3.6.1.4.1.994.3.4.7.45not-accessiblecurrent
psnmpCommandsEntry
OBJECT-TYPE
Entry for configuration table of snmpCommands
1.3.6.1.4.1.994.3.4.7.45.1not-accessiblecurrent
psnmpCommandsDescription
OBJECT-TYPE
Name for this SNMP command.
1.3.6.1.4.1.994.3.4.7.45.1.3DescriptionStringread-writecurrent
psnmpCommandsConfigured
OBJECT-TYPE
If set to true, this command will be sent for matching events. If set to false, it will not be sent.
1.3.6.1.4.1.994.3.4.7.45.1.10Configuredread-writecurrent
psnmpCommandsIpAddress
OBJECT-TYPE
Target (receiver) IP address of this SNMP command.
1.3.6.1.4.1.994.3.4.7.45.1.14IpAddressread-writecurrent
psnmpCommandsGet
OBJECT-TYPE
SNMP community used with this command.
1.3.6.1.4.1.994.3.4.7.45.1.39DescriptionStringread-writecurrent
psnmpCommandsSnmpVersion
OBJECT-TYPE
SNMP version to be used with this command.
1.3.6.1.4.1.994.3.4.7.45.1.42SnmpVersionread-writecurrent
psnmpCommandsOutputAuto
OBJECT-TYPE
Source alarm point for this SNMP command.
1.3.6.1.4.1.994.3.4.7.45.1.49Integer32read-writecurrent
psnmpCommandsOutputAutoPkg
OBJECT-TYPE
Package where the source alarm point is located.
1.3.6.1.4.1.994.3.4.7.45.1.71Integer32read-writecurrent
psnmpCommandsIPPortNum
OBJECT-TYPE
Target (receiver) IP port of this SNMP command.
1.3.6.1.4.1.994.3.4.7.45.1.73Integer32read-writecurrent
psnmpCommandsOID
OBJECT-TYPE
Target OID used with this command
1.3.6.1.4.1.994.3.4.7.45.1.132DescriptionStringread-writecurrent
psnmpCommandsSNMPVarbindType
OBJECT-TYPE
Type of value sent to target, if this is a set command.
1.3.6.1.4.1.994.3.4.7.45.1.134SNMPVarbindTyperead-writecurrent
psnmpCommandsTextNormal
OBJECT-TYPE
Value sent to target for normal condition for a set command.
1.3.6.1.4.1.994.3.4.7.45.1.135DescriptionStringread-writecurrent
psnmpCommandsTextCritical
OBJECT-TYPE
Value sent to target for critical condition for a set command.
1.3.6.1.4.1.994.3.4.7.45.1.136DescriptionStringread-writecurrent
psnmpCommandsTextMajor
OBJECT-TYPE
Value sent to target for major condition for a set command.
1.3.6.1.4.1.994.3.4.7.45.1.137DescriptionStringread-writecurrent
psnmpCommandsTextMinor
OBJECT-TYPE
Value sent to target for minor condition for a set command.
1.3.6.1.4.1.994.3.4.7.45.1.138DescriptionStringread-writecurrent
psnmpCommandsTextStatus
OBJECT-TYPE
Value sent to target for status condition for a set command.
1.3.6.1.4.1.994.3.4.7.45.1.139DescriptionStringread-writecurrent
psnmpCommandsIndex
OBJECT-TYPE
Index.
1.3.6.1.4.1.994.3.4.7.45.1.999Integer32 (1..16)read-onlycurrent
battMon
OBJECT-IDENTITY
1.3.6.1.4.1.994.3.4.7.46
battMonConfigured
OBJECT-TYPE
If set to true, this command will be sent for matching events. If set to false, it will not be sent.
1.3.6.1.4.1.994.3.4.7.46.10Configuredread-writecurrent
battMonOutputAuto
OBJECT-TYPE
Source alarm point for this SNMP command.
1.3.6.1.4.1.994.3.4.7.46.49Integer32read-writecurrent
battMonOutputAutoPkg
OBJECT-TYPE
Package where the source alarm point is located.
1.3.6.1.4.1.994.3.4.7.46.71Integer32read-writecurrent
triggers
OBJECT-IDENTITY
1.3.6.1.4.1.994.3.4.8
resetDevice
OBJECT-TYPE
Setting this item to true will cause a reset of the device. Setting this item to false will have no effect.
1.3.6.1.4.1.994.3.4.8.1Booleanread-writecurrent
commitAccountChanges
OBJECT-TYPE
Setting this item to true will cause any user account changes to go into effect immediatly. Setting this item to false will have no effect.
1.3.6.1.4.1.994.3.4.8.2Booleanread-writecurrent
resendEvents
OBJECT-TYPE
Setting this item to true will cause the device to resend traps for any standing alarms. Setting this item to false will have no effect.
1.3.6.1.4.1.994.3.4.8.3Booleanread-writecurrent

Notifications

NameOIDStatus
analogEventTrap
NOTIFICATION-TYPE
Notification sent upon an analog input reading crossing a threshold.
1.3.6.1.4.1.994.3.4.6.1.1current
digitalEventTrap
NOTIFICATION-TYPE
Notification sent upon change of state on a digital input.
1.3.6.1.4.1.994.3.4.6.2.1current
remoteDeviceEventTrap
NOTIFICATION-TYPE
Notification sent upon change of state of a remote device.
1.3.6.1.4.1.994.3.4.6.3.1current
faultTrap
NOTIFICATION-TYPE
Notification sent when a fault is encountered.
1.3.6.1.4.1.994.3.4.6.4.1current

Conformance

NameOIDStatus
notificationGroup
NOTIFICATION-GROUP
Group containing all the notification types.
1.3.6.1.4.1.994.3.4.4current
objectGroup
OBJECT-GROUP
Group containing all the objects.
1.3.6.1.4.1.994.3.4.5current
configObjectGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.994.3.4.7.999current