MIBs Depot

WATCHGUARD-HA-MIB

Registered at
1.3.6.1.4.1.3097.6.6
Last updated
2007-01-25 12:00
Organization
WatchGuard Technologies, Inc.
Revisions
2007-01-25 12:00
Namespace
watchguard
Source file
WATCHGUARD-HA-MIB
Digest
sha256:a265e28afc004b2dd4d117b1cf6d50e16ae5867e2b06a444dd48c6312c67ecce

Description

The MIB module describes general information of WatchGuard system. Mainly, the information obtained from this MIB is used by wgInfoSystemMIB, wgClientMIB, wgSystemStatisticsMIB, wgIpsecTunnelMIB, wgHAMIB.

Contact

Ella Yu WatchGuard Technologies, Inc. 1841 Zanker Road San Jose, CA 95112 USA 408-519-4888 ella.yu@watchguard.com

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso
SNMPv2-TCDateAndTime, DisplayString, TEXTUAL-CONVENTION
WATCHGUARD-MIBwatchguard

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
WATCHGUARD-HA-MIB
WATCHGUARD-MIB

Objects

NameOIDSyntaxAccessStatus
wgHAMIB
OBJECT-IDENTITY
This is the base object identifier for all HA related branches.
1.3.6.1.4.1.3097.6.6current
wgHALocal
OBJECT-IDENTITY
This is the base object identifier for all objects which are belong to local appliance.
1.3.6.1.4.1.3097.6.6.1current
wgHAStatus
OBJECT-TYPE
Indicates current status of local appliance. disabled: The local appliance of HA system is not enabled. unknown: The local appliance of HA system is in initialization as-primary-active: The local appliance that is the primary appliance of HA/AS system is in active mode. This status is also called MASTER in some systems. as-secondary-active: The local appliance that is the secondary appliance of HA/AS system is in active mode. This status is also called BACKUP in some systems. aa-primary-ative: The local appliance that is the primary appliance of HA/AA system is in active mode. aa-secondary-active: The local appliance that is the secondary appliance of HA/AA system is in active mode. aa-primary-takeover: The local appliance that is the primary appliance of HA/AA system has taken over the peer's duty. aa-secondary-takeover: The local appliance of the secondary appliance of HA/AA system has taken over the peer's duty. standby: The local appliance of HA/AS system is in standby mode. admin: The local appliance of HA system detects an mismatched configuration and waits for system administrator to reslove the conflict. failed: The local appliance of the HA system is down due to forced failover or other reasons. unavailable: It's reported when local appliance of HA system is unabled to get status information.
1.3.6.1.4.1.3097.6.6.1.1INTEGER {disabled(0), unknown(1), as-primary-active(2), as-secondary-active(3), aa-primary-ative(4), aa-secondary-active(5), aa-primary-takeover(6), aa-secondary-takeover(7), standby(8), admin(9), failed(10), unavailable(11)}read-onlycurrent
wgHAPeerStatus
OBJECT-TYPE
Indicates current status of peer appliance. unavailable: It's reported when peer appliance of HA system is unabled to get status information. active: The peer applicance of HA system is in active mode. standby: The peer applicance of HA system is in standby mode. admin: The peer applicance of HA system dectects an mismatched configuration and waits for system administrator to reslove the conflict. failed: The peer appliance of HA system is down due to forced failover or other reasons.
1.3.6.1.4.1.3097.6.6.1.2INTEGER {unavailable(0), active(1), standby(2), admin(3), failed(4)}read-onlycurrent
wgHALastDBSyncTime
OBJECT-TYPE
The last DB synchronized time of local appliance.
1.3.6.1.4.1.3097.6.6.1.3DateAndTimeread-onlycurrent
wgHAError
OBJECT-TYPE
Reports the current error that occurred in local appliance .
1.3.6.1.4.1.3097.6.6.1.4INTEGER {no-error(0), mismatched-ha-id(1), mismatched-software(2), mismatched-database(3), mismatched-hardware(4), forced-fail(5), invalid-ha-role(6), link-down(7), lost-mia-heartbeat(8), mia-not-responding(9), admin-command-failed(10), detect-ha-error(11), unavailable(12), hotsync-failed(13), config-sync-failed(14)}read-onlycurrent
wgHAPeerError
OBJECT-TYPE
Reports the current error that occurred in peer appliance.
1.3.6.1.4.1.3097.6.6.1.5INTEGER {no-error(0), mismatched-ha-id(1), mismatched-software(2), mismatched-database(3), mismatched-hardware(4), forced-fail(5), invalid-ha-role(6), link-down(7), lost-mia-heartbeat(8), mia-not-responding(9), admin-command-failed(10), detect-ha-error(11), unavailable(12), hotsync-failed(13), config-sync-failed(14)}read-onlycurrent
wgHAPeer
OBJECT-IDENTITY
This is the base object identifier for all objects which are belong to peer appliance.
1.3.6.1.4.1.3097.6.6.2current
wgHAPeerSerialNumber
OBJECT-TYPE
The serial number of peer appliance.
1.3.6.1.4.1.3097.6.6.2.1OCTET STRINGread-onlycurrent
wgHAPeerLastDBSyncTime
OBJECT-TYPE
The last DB synchronized time of peer appliance.
1.3.6.1.4.1.3097.6.6.2.2DateAndTimeread-onlycurrent
wgHAPeerDevice
OBJECT-IDENTITY
This is the base object for parameters and configuration data of devices in this entity.
1.3.6.1.4.1.3097.6.6.2.3current
wgHAPeerIfNumber
OBJECT-TYPE
The number of RapidCard installed in this entity.
1.3.6.1.4.1.3097.6.6.2.3.1Unsigned32read-onlycurrent
wgHAPeerIfTable
OBJECT-TYPE
A list of RapidCard entries. The number of entries is given by the value of wgHAPeerDeviceNumber.
1.3.6.1.4.1.3097.6.6.2.3.2not-accessiblecurrent
wgHAPeerIfEntry
OBJECT-TYPE
A RapidCard entry containing objects for a particular RapidCard.
1.3.6.1.4.1.3097.6.6.2.3.2.1not-accessiblecurrent
wgHAPeerIfIndex
OBJECT-TYPE
The unique value for each interface.
1.3.6.1.4.1.3097.6.6.2.3.2.1.1Unsigned32read-onlycurrent
wgHAPeerIfIpAddr
OBJECT-TYPE
The ip address of the interface.
1.3.6.1.4.1.3097.6.6.2.3.2.1.4IpAddressread-onlycurrent
wgHAPeerIfLinkStatus
OBJECT-TYPE
The current state of the interface.
1.3.6.1.4.1.3097.6.6.2.3.2.1.9INTEGER {down(0), up(1), other(2)}read-onlycurrent
wgHAPeerCounters
OBJECT-IDENTITY
This is the base object for parameters and configuration data of devices in this entity.
1.3.6.1.4.1.3097.6.6.2.4current
wgHAPeerSystemCpuUtil
OBJECT-TYPE
The CPU utilization of the peer system in last 5 seconds.
1.3.6.1.4.1.3097.6.6.2.4.1Gauge32read-onlycurrent
wgHAPeerSystemTotalSendBytes
OBJECT-TYPE
The total number of bytes sent since peer system is up.
1.3.6.1.4.1.3097.6.6.2.4.2Counter64read-onlycurrent
wgHAPeerSystemTotalRecvBytes
OBJECT-TYPE
The total number of bytes received since peer system is up.
1.3.6.1.4.1.3097.6.6.2.4.3Counter64read-onlycurrent
wgHAPeerSystemTotalSendPackets
OBJECT-TYPE
The total number of packets sent since peer system is up.
1.3.6.1.4.1.3097.6.6.2.4.4Counter64read-onlycurrent
wgHAPeerSystemTotalRecvPackets
OBJECT-TYPE
The total number of packets received since peer system is up.
1.3.6.1.4.1.3097.6.6.2.4.5Counter64read-onlycurrent
wgHAPeerSystemStreamReqTotal
OBJECT-TYPE
The total number of the connection requests since system is up.
1.3.6.1.4.1.3097.6.6.2.4.6Counter64read-onlycurrent
wgHAPeerSystemStreamReqDrop
OBJECT-TYPE
The total number of the connection requests being dropped since system is up.
1.3.6.1.4.1.3097.6.6.2.4.7Counter64read-onlycurrent
wgHAPeerSystemCurrIpsecTunnels
OBJECT-TYPE
The number of ipsec tunnels in the peer system currently.
1.3.6.1.4.1.3097.6.6.2.4.8Counter64read-onlycurrent
wgHAPeerSystemCpuUtil1
OBJECT-TYPE
The CPU utilization of the peer system in last 1 minute.
1.3.6.1.4.1.3097.6.6.2.4.9Gauge32read-onlycurrent
wgHAPeerSystemCpuUtil5
OBJECT-TYPE
The CPU utilization of the peer system in last 5 minutes.
1.3.6.1.4.1.3097.6.6.2.4.10Gauge32read-onlycurrent
wgHAPeerSystemCpuUtil15
OBJECT-TYPE
The CPU utilization of the peer system in last 15 minutes.
1.3.6.1.4.1.3097.6.6.2.4.11Gauge32read-onlycurrent