UBQS-MPLS-LDP-MIB
- Registered at
- 1.3.6.1.4.1.7800.100.24.3
- Last updated
- 2011-06-22 00:00
- Organization
- Ubiquoss Corp.
- Namespace
- ubiquoss
- Source file
UBQS-MPLS-LDP-MIB- Digest
sha256:e3961402a921fde9e3ea32636f6543f1615c5ee2fd6496bd5ebb803275c62c1f
Contact
Ubiquoss Customer Service Postal: 24F Milennium B/D, 467-12, Dogok-Dong, GangNam-Gu, Seoul 135-270 Korea Tel: 82-2-2190-3100
Imports
| From | Symbols |
|---|---|
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressPrefixLength, InetAddressType |
| MPLS-TC-STD-MIB | MplsLSPID, MplsOwner, MplsTunnelIndex, MplsTunnelInstanceIndex, TeHopAddressType, mplsStdMIB |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, IpAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
| UBQS-SMI | ubiMplsGroupMIB |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB INET-ADDRESS-MIB MPLS-TC-STD-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC UBQS-MPLS-LDP-MIB UBQS-SMI
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ubiLdpMIBNotificationPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.7800.100.24.3.0 | |||
| ubiLdpMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.7800.100.24.3.1 | |||
| ubiLdpConfig OBJECT-IDENTITY | 1.3.6.1.4.1.7800.100.24.3.1.1 | |||
| ubiLdpEnable OBJECT-TYPE Set the global attribute of LDP whether the LDP performs the operations. If this attribute is not set, then the LDP does not send any kinds of packets. | 1.3.6.1.4.1.7800.100.24.3.1.1.1 | TruthValue | read-write | current |
| ubiLdpRouterId OBJECT-TYPE This entry set the router-id to the supplied IP address. The router uses this address to generate the LDP-ID. If you does not set this feild and the ubiLdpEnable attribute is enabled, then LDP Module automatically generate the LDP-ID. The algorithm for making ID is not covered in this description. please refer to RFC 5036 2.2.2. LDP Identifiers. | 1.3.6.1.4.1.7800.100.24.3.1.1.2 | IpAddress | read-write | current |
| ubiLdpFailoverCfmEnable OBJECT-TYPE set the attribute of Connectivity Fault Management(CFM) in LDP. If you set this field, LDP creates the socket (AF_CFM) to detect whether the link associated with the peer is UP or DOWN. After set this attribute, You MUST enable the property for CFM in the interface which you want to check the connectivity. | 1.3.6.1.4.1.7800.100.24.3.1.1.3 | TruthValue | read-write | current |
| ubiLdpTargetedPeerHelloReceiptEnable OBJECT-TYPE Enable whether LDP accepts the packets from the targeted peer and cerate the instance for peer. If you want to configure the targeted-peer in network, then MUST enable this field at first. | 1.3.6.1.4.1.7800.100.24.3.1.1.4 | TruthValue | read-write | current |
| ubiLdpAcUpSignalEnable OBJECT-TYPE Enable the field to notify the interface of binded vpls to the neighbors for VPLS. If this is reset, then does not quickly send the signal to neighbors. | 1.3.6.1.4.1.7800.100.24.3.1.1.5 | TruthValue | read-write | current |
| ubiLdpExceedInitSessionNotiEnable OBJECT-TYPE | 1.3.6.1.4.1.7800.100.24.3.1.1.6 | TruthValue | read-write | current |
| ubiLdpPathVectorLimitMismatchNotiEnable OBJECT-TYPE | 1.3.6.1.4.1.7800.100.24.3.1.1.7 | TruthValue | read-write | current |
| ubiLdpLdpSessionUpDownNotiEnable OBJECT-TYPE | 1.3.6.1.4.1.7800.100.24.3.1.1.8 | TruthValue | read-write | current |
| ubiLdpInterfaceTable OBJECT-TYPE This table specifies the LDP information for each interface. | 1.3.6.1.4.1.7800.100.24.3.1.2 | not-accessible | current | |
| ubiLdpInterfaceEntry OBJECT-TYPE A row in this table represents an LDP enable/disable status for each interface. | 1.3.6.1.4.1.7800.100.24.3.1.2.1 | not-accessible | current | |
| ubiLdpIfEnable OBJECT-TYPE If this object is set to ipv4, ipv6, or both, then it is possible to transmit Hello packet through a specified interface. And LDP adjacencies and session can be created. | 1.3.6.1.4.1.7800.100.24.3.1.2.1.1 | INTEGER {none(0), ipv4(1), ipv6(2), both(3)} | read-write | current |
| ubiLdpMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.7800.100.24.3.2 | |||
| ubiLdpMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.7800.100.24.3.2.1 | |||
| ubiLdpMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.7800.100.24.3.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| ubiLdpMIBCompliance MODULE-COMPLIANCE The compliance statement for entities which implement the UBQS-MPLS-LDP-MIB | 1.3.6.1.4.1.7800.100.24.3.2.1.1 | current |
| ubiLdpMIBGroup OBJECT-GROUP A collection of objects containing information about the LDP information. | 1.3.6.1.4.1.7800.100.24.3.2.2.1 | current |