MIBs Depot

UBQS-IP-MIB

Registered at
1.3.6.1.4.1.7800.100.14
Last updated
2010-12-28 00:00
Organization
Ubiquoss Corp.
Namespace
ubiquoss
Source file
UBQS-IP-MIB
Digest
sha256:9fb02fe569036e54f798444311655480116c82cac88de64136d53021af9ba21b

Description

This MIB module defines IP information.

Contact

Ubiquoss Customer Service Postal: 24F Milennium B/D, 467-12, Dogok-Dong, GangNam-Gu, Seoul 135-270 Korea Tel: 82-2-2190-3100

Imports

FromSymbols
IF-MIBInterfaceIndex
INET-ADDRESS-MIBInetAddress, InetAddressPrefixLength, InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue
UBQS-SMIubiMgmtv2

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
UBQS-IP-MIB
UBQS-SMI

Objects

NameOIDSyntaxAccessStatus
ubiIpMIBNotificationPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.14.0
ubiIpMIBNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.14.0.1
ubiPingMIBNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.14.0.2
ubiIpMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.14.1
ubiIpAddrTable
OBJECT-TYPE
The table of addressing information relevant to this entity's IP addresses.
1.3.6.1.4.1.7800.100.14.1.1not-accessiblecurrent
ubiIpAddrEntry
OBJECT-TYPE
The addressing information for one of this entity's IP addresses.
1.3.6.1.4.1.7800.100.14.1.1.1not-accessiblecurrent
ubiIpAddrType
OBJECT-TYPE
The IP address type. ipv4(1) An IPv4 address as defined by the InetAddressIPv4 textual convention. ipv6(2) An IPv6 address as defined by the InetAddressIPv6 textual convention.
1.3.6.1.4.1.7800.100.14.1.1.1.1InetAddressTyperead-onlycurrent
ubiIpAddress
OBJECT-TYPE
The IP address to which this entry's addressing information pertains.
1.3.6.1.4.1.7800.100.14.1.1.1.2InetAddressread-onlycurrent
ubiIpAddrPrefixLen
OBJECT-TYPE
The prefix length associated with the IP address.
1.3.6.1.4.1.7800.100.14.1.1.1.3InetAddressPrefixLengthread-onlycurrent
ubiIpAddrIfIndex
OBJECT-TYPE
The index value which uniquely identifies the interface to which this entry is applicable.
1.3.6.1.4.1.7800.100.14.1.1.1.4InterfaceIndexread-createcurrent
ubiIpAddrStatus
OBJECT-TYPE
Indicate whether this entry is primary or not.
1.3.6.1.4.1.7800.100.14.1.1.1.5INTEGER {primary(1), secondary(2)}read-createcurrent
ubiIpAddrRowstatus
OBJECT-TYPE
This object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.7800.100.14.1.1.1.6RowStatusread-createcurrent
ubiInetRouteTable
OBJECT-TYPE
The table of addressing information relevant to this entity's IP addresses.
1.3.6.1.4.1.7800.100.14.1.2not-accessiblecurrent
ubiInetRouteEntry
OBJECT-TYPE
The addressing information for one of this entity's IP addresses.
1.3.6.1.4.1.7800.100.14.1.2.1not-accessiblecurrent
ubiInetRouteInstance
OBJECT-TYPE
The instance identifier of the (conceptual) routing table containing this route.
1.3.6.1.4.1.7800.100.14.1.2.1.1Unsigned32read-onlycurrent
ubiInetRouteDestType
OBJECT-TYPE
The destination address type. ipv4(1) An IPv4 address as defined by the InetAddressIPv4 textual convention. ipv6(2) An IPv6 address as defined by the InetAddressIPv6 textual convention.
1.3.6.1.4.1.7800.100.14.1.2.1.2InetAddressTyperead-onlycurrent
ubiInetRouteDest
OBJECT-TYPE
The destination IP address of this route.
1.3.6.1.4.1.7800.100.14.1.2.1.3InetAddressread-onlycurrent
ubiInetRouteDestPfxLen
OBJECT-TYPE
1.3.6.1.4.1.7800.100.14.1.2.1.4InetAddressPrefixLengthread-onlycurrent
ubiInetRouteNextHopType
OBJECT-TYPE
1.3.6.1.4.1.7800.100.14.1.2.1.5InetAddressTyperead-onlycurrent
ubiInetRouteNextHop
OBJECT-TYPE
1.3.6.1.4.1.7800.100.14.1.2.1.6InetAddressread-onlycurrent
ubiInetRouteIfIndex
OBJECT-TYPE
1.3.6.1.4.1.7800.100.14.1.2.1.7InterfaceIndexread-onlycurrent
ubiInetRoutetype
OBJECT-TYPE
1.3.6.1.4.1.7800.100.14.1.2.1.8INTEGER {other(1), invalid(2), direct(3), indirect(4)}read-onlycurrent
ubiInetRouteProto
OBJECT-TYPE
1.3.6.1.4.1.7800.100.14.1.2.1.9INTEGER {other(1), local(2), netmgmt(3), icmp(4), egp(5), ggp(6), hello(7), rip(8), isis(9), esis(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14)}read-onlycurrent
ubiInetRouteMetric1
OBJECT-TYPE
1.3.6.1.4.1.7800.100.14.1.2.1.10Integer32read-onlycurrent
ubiInetRouteMetric2
OBJECT-TYPE
1.3.6.1.4.1.7800.100.14.1.2.1.11Integer32read-onlycurrent
ubiInetRouteMetric3
OBJECT-TYPE
1.3.6.1.4.1.7800.100.14.1.2.1.12Integer32read-onlycurrent
ubiInetRouteMetric4
OBJECT-TYPE
1.3.6.1.4.1.7800.100.14.1.2.1.13Integer32read-onlycurrent
ubiInetRouteMetric5
OBJECT-TYPE
1.3.6.1.4.1.7800.100.14.1.2.1.14Integer32read-onlycurrent
ubiInetRouteStatus
OBJECT-TYPE
1.3.6.1.4.1.7800.100.14.1.2.1.15INTEGER {active(1), inactive(2)}read-onlycurrent
ubiInetRouteDistance
OBJECT-TYPE
1.3.6.1.4.1.7800.100.14.1.2.1.16Integer32 (1..255)read-writecurrent
ubiInetRouteTag
OBJECT-TYPE
1.3.6.1.4.1.7800.100.14.1.2.1.17Unsigned32read-writecurrent
ubiInetRouteNextHopName
OBJECT-TYPE
1.3.6.1.4.1.7800.100.14.1.2.1.18DisplayStringread-writecurrent
ubiInetRouteRowstatus
OBJECT-TYPE
1.3.6.1.4.1.7800.100.14.1.2.1.19RowStatusread-createcurrent
ubiIpv6NeighborTable
OBJECT-TYPE
The table of addressing information relevant to this entity's IPv6 addresses.
1.3.6.1.4.1.7800.100.14.1.3not-accessiblecurrent
ubiIpv6NeighborEntry
OBJECT-TYPE
The addressing information for one of this entity's IPv6 addresses.
1.3.6.1.4.1.7800.100.14.1.3.1not-accessiblecurrent
ubiIpv6NeighborIfIndex
OBJECT-TYPE
The inde value which uniquely identifies the interface to which this entry is applicable
1.3.6.1.4.1.7800.100.14.1.3.1.1InterfaceIndexread-onlycurrent
ubiIpv6NeighborPhysAddress
OBJECT-TYPE
The media-dependent `physical' address. This object should return 0 when this entry is in the 'incomplete' state. As the entries in this table are typically not persistent when this object is written the entity should not save the change to non-volatile storage. Note: a stronger requirement is not used because this object was previously defined.
1.3.6.1.4.1.7800.100.14.1.3.1.2PhysAddress (SIZE(0..65535))read-createcurrent
ubiIpv6NeighborNetAddress
OBJECT-TYPE
The Ipv6Address corresponding to the media-dependent `physical' address. This object predates the rule limiting index objects to a max access value of 'not-accessible' and so continues to use a value of 'read-create'.
1.3.6.1.4.1.7800.100.14.1.3.1.3InetAddressread-onlycurrent
ubiIpv6NeighborType
OBJECT-TYPE
The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ubiIpv6NeighborTable. That is, it effectively dis-associates the interface identified with said entry from the mapping identified with said entry. It is an implementation- specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ubiIpv6NeighborType object. As the entries in this table are typically not persistent when this object is written the entity should not save the change to non-volatile storage. Note: a stronger requirement is not used because this object was previously defined.
1.3.6.1.4.1.7800.100.14.1.3.1.4INTEGER {dynamic(0), static(1)}read-onlycurrent
ubiIpv6NeighborState
OBJECT-TYPE
The Neighbor Unreachability Detection [3] state for the interface when the address mapping in this entry is used. If Neighbor Unreachability Detection is not in use, this object is always unknown(6).
1.3.6.1.4.1.7800.100.14.1.3.1.5INTEGER {reachable(1), stale(2), delay(3), probe(4), invalid(5), unknown(6), incomplete(7)}read-onlycurrent
ubiIpv6NeighborLastUpdated
OBJECT-TYPE
The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
1.3.6.1.4.1.7800.100.14.1.3.1.6TimeStampread-onlycurrent
ubiIpv6NeighborRowstatus
OBJECT-TYPE
The status of this conceptual row. As all objects in this conceptual row have default values, a row can be created and made active by setting this object appropriately. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effect on whether other objects in this conceptual row can be modified.
1.3.6.1.4.1.7800.100.14.1.3.1.7RowStatusread-createcurrent
ubiPingMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.14.2
ubiPingGlobal
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.14.2.1
ubiPingSend
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.14.2.2
ubiPingSendProto
OBJECT-TYPE
The protocol to use.
1.3.6.1.4.1.7800.100.14.2.2.1INTEGER {other(1), ip(2), ipv6(3)}read-writecurrent
ubiPingSendTarget
OBJECT-TYPE
The address of the device to be pinged.
1.3.6.1.4.1.7800.100.14.2.2.2DisplayStringread-writecurrent
ubiPingSendRepeat
OBJECT-TYPE
Specifies the number of ping packets to send to the target.
1.3.6.1.4.1.7800.100.14.2.2.3Integer32read-writecurrent
ubiPingSendPacketSize
OBJECT-TYPE
Specifies the size of ping packets to send to the target.
1.3.6.1.4.1.7800.100.14.2.2.4Integer32 (0..60000)read-writecurrent
ubiPingSendTimeout
OBJECT-TYPE
Specifies the amount of time to wait for a response.
1.3.6.1.4.1.7800.100.14.2.2.5Integer32read-writecurrent
ubiPingSendInterval
OBJECT-TYPE
Specifies the amount of time to wait before sending the next packet.
1.3.6.1.4.1.7800.100.14.2.2.6Integer32read-writecurrent
ubiPingSendSrcAddr
OBJECT-TYPE
Specifies the sender IP address for sending packets.
1.3.6.1.4.1.7800.100.14.2.2.7DisplayStringread-writecurrent
ubiPingSendTTL
OBJECT-TYPE
Specifies the TTL.
1.3.6.1.4.1.7800.100.14.2.2.8Integer32read-writecurrent
ubiPingSendTos
OBJECT-TYPE
Specifies the Type Of Service.
1.3.6.1.4.1.7800.100.14.2.2.9Integer32read-writecurrent
ubiPingSendDF
OBJECT-TYPE
Specifies the DF bit in IP header. dont(2) means a packet cannot be fragmented.
1.3.6.1.4.1.7800.100.14.2.2.10INTEGER {none(0), do(1), dont(2)}read-writecurrent
ubiPingSendExecute
OBJECT-TYPE
Send the ping packets when value is set to send(1).
1.3.6.1.4.1.7800.100.14.2.2.15INTEGER {send(1)}read-writecurrent
ubiPingResults
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.14.2.3
ubiPingSendCompleted
OBJECT-TYPE
Set to true when all the packets in this sequence have been either responded to or timed out.
1.3.6.1.4.1.7800.100.14.2.3.1TruthValueaccessible-for-notifycurrent
ubiPingSendPackets
OBJECT-TYPE
The total number of the sending ping.
1.3.6.1.4.1.7800.100.14.2.3.2Counter32accessible-for-notifycurrent
ubiPingReceivedPackets
OBJECT-TYPE
The total number of the received ping.
1.3.6.1.4.1.7800.100.14.2.3.3Counter32accessible-for-notifycurrent
ubiIpMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.14.3
ubiIpMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.14.3.1
ubiIpMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.7800.100.14.3.2

Notifications

NameOIDStatus
ubiPingSendCompletion
NOTIFICATION-TYPE
This notification is sent at the completion of the sequence of pings.
1.3.6.1.4.1.7800.100.14.0.2.1current

Conformance

NameOIDStatus
ubiIpMIBCompliance
MODULE-COMPLIANCE
The compliance statement for entities which implement the UBQS-IP-MIB
1.3.6.1.4.1.7800.100.14.3.1.2current
ubiIpAddrGroup
OBJECT-GROUP
A collection of objects containing information about the address information of system.
1.3.6.1.4.1.7800.100.14.3.2.1current
ubiPingGroup
OBJECT-GROUP
A collection of objects containing information about the ping.
1.3.6.1.4.1.7800.100.14.3.2.2current