TRAPEZE-NETWORKS-TRAP-MIB
- Registered at
- 1.3.6.1.4.1.14525.4.11.3.6.1.4.1.14525.5.0
- Last updated
- 2012-07-31 04:06
- Organization
- Trapeze Networks
- Revisions
- 2012-07-31 04:06, 2012-04-20 04:05, 2012-04-09 04:03, 2012-03-15 03:10, 2011-10-18 03:00, 2011-01-11 02:50, 2010-12-21 02:40, 2010-12-21 02:28, 2008-12-19 02:27, 2008-10-30 02:25, 2008-05-15 02:15, 2008-05-07 02:12, 2008-04-22 02:02, 2008-04-10 02:01, 2008-04-08 01:58, 2008-02-18 01:57, 2007-12-03 01:53, 2007-11-15 01:52, 2007-11-01 01:45, 2007-10-01 01:41, 2007-08-31 01:40, 2007-08-24 01:22, 2007-07-06 01:10, 2007-06-05 01:07, 2007-05-17 01:06, 2007-05-04 01:03, 2007-04-19 01:00, 2007-03-27 00:54, 2007-02-15 00:53, 2007-01-09 00:52, 2007-01-09 00:51, 2007-01-09 00:50, 2006-09-28 00:45, 2006-08-08 00:42, 2006-07-31 00:40, 2006-07-28 00:32, 2006-07-23 00:29, 2006-07-12 00:28, 2006-07-07 00:26, 2006-07-07 00:25, 2006-07-06 00:23, 2006-04-19 00:22, 2006-04-19 00:21, 2005-01-01 00:00
- Namespace
- juniper
- Source file
TRAPEZE-NETWORKS-TRAP-MIB- Digest
sha256:b6b3106a6a1937111c0babea706b07df96fca6bf2492c64cfaab5537cbab7d36
Description
Notifications emitted by Trapeze Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2004-2012 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Contact
Trapeze Networks Technical Support www.trapezenetworks.com US: 866.TRPZ.TAC International: 925.474.2400 support@trapezenetworks.com
Imports
| From | Symbols |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressIPv4, InetAddressIPv6, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, TEXTUAL-CONVENTION |
| TRAPEZE-NETWORKS-AP-TC | TrpzAccessType, TrpzApAttachType, TrpzApConnectSecurityType, TrpzApFailDetail, TrpzApFingerprint, TrpzApNum, TrpzApPortOrDapNum, TrpzApRadioIndex, TrpzApSerialNum, TrpzApServiceAvailability, TrpzApTransition, TrpzApWasOperational, TrpzChannelChangeType, TrpzChannelNum, TrpzCryptoType, TrpzPowerLevel, TrpzRadioChannelWidth, TrpzRadioConfigState, TrpzRadioMimoState, TrpzRadioMode, TrpzRadioNum, TrpzRadioPowerChangeType, TrpzRadioType, TrpzRssi |
| TRAPEZE-NETWORKS-BASIC-TC | TrpzIpPort, TrpzPhysPortNumberOrZero |
| TRAPEZE-NETWORKS-CLIENT-SESSION-TC | TrpzClientAccessMode, TrpzClientAuthenProtocolType, TrpzClientDeviceGroupName, TrpzClientDeviceProfileName, TrpzClientDeviceType, TrpzClientDot1xState, TrpzClientSessionState, TrpzUserAccessType |
| TRAPEZE-NETWORKS-RF-DETECT-TC | TrpzRFDetectClassificationReason |
| TRAPEZE-NETWORKS-RF-NOISE-TC-MIB | TrpzRFNoiseSourceID, TrpzRFNoiseSourceType |
| TRAPEZE-NETWORKS-ROOT-MIB | trpzMibs, trpzTemporary, trpzTraps |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
INET-ADDRESS-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC TRAPEZE-NETWORKS-AP-TC TRAPEZE-NETWORKS-BASIC-TC TRAPEZE-NETWORKS-CLIENT-SESSION-TC TRAPEZE-NETWORKS-RF-DETECT-TC TRAPEZE-NETWORKS-RF-NOISE-TC-MIB TRAPEZE-NETWORKS-ROOT-MIB TRAPEZE-NETWORKS-TRAP-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| TrpzApMgrChangeReason TEXTUAL-CONVENTION Enumeration of the reasons why AP is switching to its secondary link: failover: AP's primary link failed. load-balancing: AP's primary link is overloaded. | current | |||
| TrpzAssociationFailureType TEXTUAL-CONVENTION Enumeration of the reasons for an AP to fail a client's 802.11 association | current | |||
| TrpzAuthenticationFailureType TEXTUAL-CONVENTION Enumeration of the reasons for AAA authentication to fail user-glob-mismatch - auth rule/user not found for console login user-does-not-exist - login failed because user not found invalid-password - login failed because of invalid password server-timeout - unable to contact a AAA server signature-failed - incorrect password for mschapv2 local-certificate-error - certificate error all-servers-down - unable to contact any AAA server in the group authentication-type-mismatch - client and switch are using different authentication methods server-rejected - received reject from AAA server fallthru-auth-misconfig - problem with fallthru authentication no-lastresort-auth - problem with last-resort authentication exceeded-max-attempts - local user failed to login within allowed number of attempts resulting in account lockout password-expired - user's password expired | current | |||
| TrpzAuthorizationFailureType TEXTUAL-CONVENTION Enumeration of the reasons for AAA authorization failure | current | |||
| TrpzAutoTuneFailureReason TEXTUAL-CONVENTION Enumeration of the reasons why an auto-tune operation failed: ap-conn-lost: The connection with an AP involved in the auto-tune process was lost. ws-conn-lost: The connection with a wireless switch involved in the auto-tune process was lost. | current | |||
| TrpzBlacklistingCause TEXTUAL-CONVENTION Enumeration of reasons for blacklisting a transmitter: bl-configured: administrative action (explicitly added to the Black List), bl-associate-pkt-flood: Association request flood detected, bl-re-associate-pkt-flood: Re-association request flood detected, bl-de-associate-pkt-flood: De-association request flood detected. (The leading 'bl-' stands for 'Black-Listed'; reading it as 'Blocked' would also make sense). | current | |||
| TrpzClientAuthorizationReason TEXTUAL-CONVENTION Enumeration of the reasons for AAA authorization. | current | |||
| TrpzClientClearedReason TEXTUAL-CONVENTION Enumeration of the reasons for clearing a session: normal: Session was cleared from the switch as the last step in the normal session termination process. backup-failure: The backup switch could not activate a session from a failed MX. | current | |||
| TrpzClientDeviceProfileChangeReason TEXTUAL-CONVENTION Enumeration of the reasons for device profile changes. aaa-policy: The device profile has changed due to an AAA policy, after authentication. device-type-changed: The device type has changed. | current | |||
| TrpzClientIpAddrChangeReason TEXTUAL-CONVENTION Describes the reasons for client IP address changes: client-connected-ipv4: an IPv4 address was assigned on the initial connection of an IPv4 client, or when an IPv6 client activated the IPv4 stack; other: IPv4 address changed after initial connection; dhcp-to-static: erroneous condition where client IPv4 address is changed to a static address while the dhcp-restrict option is enabled; ipv6-global-addr: a new IPv6 global address was assigned to the client. | current | |||
| TrpzClusterFailureReason TEXTUAL-CONVENTION Enumeration of the reasons why the AC goes into cluster failure state: validation-error: Cluster configuration rejected due to validation error. | current | |||
| TrpzConfigSaveInitiatorType TEXTUAL-CONVENTION Enumeration of the sources that can initiate a configuration save: cli-console: configuration save requested from serial console administrative session. cli-remote: configuration save requested from telnet or ssh administrative session. https: configuration save requested via HTTPS API (RingMaster or WebView). snmp-set: configuration saved as a result of performing a SNMP SET operation. | current | |||
| TrpzDot1xFailureType TEXTUAL-CONVENTION Enumeration of the dot1x failure reasons. quiet-period occurs when client is denied access for a period of time after a failed connection attempt administrative-kill means that the session was cleared using the 'clear dot1x client' command bad-rsnie means that client sent an invalid IE timeout is when there are excessive retransmissions max-sessions-exceeded means the maximum allowed wired clients has been exceeded on the switch fourway-hs-failure is for failures occuring the 4-way key handshake user-glob-mismatch means the name received in the dot1x identity request does not match any configured userglobs in the system reauth-disabled means that the client is trying to reauthenticate but reauthentication is disabled gkhs-failure means that either there was no response from the client during the GKHS or the response did not have an IE force-unauth-configured means that the client is trying to connect through a port which is configured as force-unauth cert-not-installed means that there is no certificate installed on the switch | current | |||
| TrpzM2UConvNotPossibleReason TEXTUAL-CONVENTION Enumeration of the reasons why multicast to unicast conversion cannot be performed. max-conv-limit: The number of required conversions is higher than the defined limit. | current | |||
| TrpzMichaelMICFailureCause TEXTUAL-CONVENTION Describes the cause/source of Michael MIC Failure detection. | current | |||
| TrpzMobilityDomainResiliencyStatus TEXTUAL-CONVENTION Enumeration of the current resilient capacity status for a mobility domain: resilient: Every AP in the mobility domain has a secondary backup link. If the primary switch of an AP failed, the AP and its sessions would fail over to its backup link. degraded: Some APs only have a primary link. If the primary switch of an AP without a backup link failed, the AP would reboot and its sessions would be lost. | current | |||
| TrpzMultimediaCallDirection TEXTUAL-CONVENTION Enumeration of the multimedia call direction. | current | |||
| TrpzMultimediaCallFailureReason TEXTUAL-CONVENTION Enumeration of the reasons why a multimedia call fails. | current | |||
| TrpzMultimediaSignalingProtocol TEXTUAL-CONVENTION Enumeration of Multimedia Signaling Protocols: protocols for creating, modifying, terminating sessions. The first signaling protocol supported is: sip = Session Initiation Protocol. | current | |||
| TrpzRFDetectDoSType TEXTUAL-CONVENTION The types of denial of service (DoS) attacks | current | |||
| TrpzRadioBand TEXTUAL-CONVENTION Enumeration of the 802.11 radio bands. 802.11 a/n use the 5 GHz band. 802.11 b/g/n use the 2.4 GHz band. | current | |||
| TrpzSessionDisconnectType TEXTUAL-CONVENTION Enumeration of the sources that can initiate the termination of a session: admin-disconnect: session terminated by administrative action (from console, telnet session, WebView, or RingMaster). dyn-auth-disconnect: session terminated by dynamic authorization client; description will have the IP address of the dynamic authorization client which sent the request. | current | |||
| TrpzUserAttributeList TEXTUAL-CONVENTION Display string listing AAA attributes and their values. These strings can be used, for example, in change of authorization notifications. The syntax is: attribute_name1=value1, attribute_name2=value2, ... where attribute_name can be one of the following: vlan-name, in-acl, out-acl, mobility-prof, time-of-day, end-date, sess-timeout, acct-interval, service-type. Example: vlan-name=red, in-acl=in_acl_1 | current | |||
| TrpzWsTunnelLimitType TEXTUAL-CONVENTION Enumeration of the type of limit exceeded that caused the AC (wireless switch) to reject a tunnel creation request. The value 'platform-tunnel-limit' (2) corresponds to the maximum tunnel capacity of a switch, which depends on the platform. Some of the available tunnel capacity for each switch is reserved for switch-to-switch tunnels. The remaining tunnel capacity is used for AP-to-switch tunnels. The switch-to-switch tunnel reservations can increase or decrease depending on factors such as: - the current number of members in the mobility domain, - the current number of members in the network domain, - network resiliency status. The value 'ap-ws-tunnel-limit' (3) corresponds to the available number of AP-to-switch tunnels, which depends on the current situation of the switch. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| trpzDeviceId OBJECT-TYPE Enumeration of devices as indicated in registration MIB. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.1 | OBJECT IDENTIFIER | accessible-for-notify | current |
| trpzMobilityDomainIp OBJECT-TYPE IP address of the other switch which the send switch is reporting on. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.2 | IpAddress | accessible-for-notify | current |
| trpzAPMACAddress OBJECT-TYPE MAC address of the AP of interest. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.3 | MacAddress | accessible-for-notify | current |
| trpzClientMACAddress OBJECT-TYPE MAC address of the client of interest. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.4 | MacAddress | accessible-for-notify | current |
| trpzRFDetectXmtrMacAddr OBJECT-TYPE Describes the transmitter's MAC address. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.5 | MacAddress | accessible-for-notify | current |
| trpzPortNum OBJECT-TYPE Port number on the AC which reported this rogue during a detection sweep. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.6 | INTEGER (1..22) | accessible-for-notify | current |
| trpzAPRadioNum OBJECT-TYPE Radio number of the AP which reported this rogue during a detection sweep. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.7 | TrpzRadioNum | accessible-for-notify | current |
| trpzRadioRssi OBJECT-TYPE The received signal strength as measured by the AP radio which reported this rogue during a detection sweep. This object is used within notifications and is not accessible. Not used by any notification. | 1.3.6.1.4.1.14525.2.8 | INTEGER (0..1024) | accessible-for-notify | obsolete |
| trpzRadioBSSID OBJECT-TYPE The basic service set identifier of the rogue from the beacon frame reported by the AP during a detection sweep. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.9 | OCTET STRING (SIZE(6)) | accessible-for-notify | current |
| trpzUserName OBJECT-TYPE The client user name as learned from the AAA process. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.10 | DisplayString (SIZE(0..32)) | accessible-for-notify | current |
| trpzClientAuthServerIp OBJECT-TYPE The client authentication server ip address. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.11 | IpAddress | accessible-for-notify | current |
| trpzClientSessionState OBJECT-TYPE The state for a client session. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.12 | TrpzClientSessionState | accessible-for-notify | current |
| trpzDAPNum OBJECT-TYPE The DAP number on the wireless switch. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.13 | INTEGER (1..100) | accessible-for-notify | current |
| trpzClientIp OBJECT-TYPE The client ip address. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.14 | IpAddress | accessible-for-notify | obsolete |
| trpzClientSessionId OBJECT-TYPE The unique global id for a client session. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.15 | DisplayString (SIZE(0..32)) | accessible-for-notify | current |
| trpzClientAuthenProtocolType OBJECT-TYPE The authentication protocol for a client. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.16 | TrpzClientAuthenProtocolType | accessible-for-notify | current |
| trpzClientVLANName OBJECT-TYPE The vlan name a client is on. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.17 | DisplayString (SIZE(0..32)) | accessible-for-notify | current |
| trpzClientSessionStartTime OBJECT-TYPE The start time of a client session, relative to the sysUptime. This object is used within notifications and is not accessible. Obsolete. Do not use it because it's not vital information and often *cannot* be implemented to match the declared semantics: a client session might have been created on another wireless switch, *before* the current switch booted (the local zero of sysUptime). | 1.3.6.1.4.1.14525.2.18 | TimeTicks | accessible-for-notify | obsolete |
| trpzClientFailureCause OBJECT-TYPE Display string for possible failure cause for a client session. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.19 | DisplayString (SIZE(0..255)) | accessible-for-notify | current |
| trpzClientRoamedFromPortNum OBJECT-TYPE The port number on the AC a client has roamed from. This object is used within notifications and is not accessible. Obsoleted by 'trpzClientRoamedFromPhysPortNum'. | 1.3.6.1.4.1.14525.2.20 | INTEGER (1..20) | accessible-for-notify | obsolete |
| trpzClientRoamedFromRadioNum OBJECT-TYPE The radio number of the AP the client is roamed from. This object is used within notifications and is not accessible. Obsoleted by 'trpzClientRoamedFromRadioIndex'. | 1.3.6.1.4.1.14525.2.21 | TrpzRadioNum | accessible-for-notify | obsolete |
| trpzClientRoamedFromDAPNum OBJECT-TYPE The DAP number on the AC which reported this rogue during roam. This object is used within notifications and is not accessible. Obsoleted by 'trpzClientRoamedFromApNum'. | 1.3.6.1.4.1.14525.2.22 | INTEGER (1..100) | accessible-for-notify | obsolete |
| trpzUserParams OBJECT-TYPE A display string of User Parameters for client user authorization attributes learned through AAA and/or used by the system. Note that the syntax will be (name=value, name=value,..) for the parsing purpose. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.23 | DisplayString (SIZE(0..255)) | accessible-for-notify | current |
| trpzClientLocationPolicyIndex OBJECT-TYPE Index of the Location Policy rule applied to a user. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.24 | INTEGER (0..1024) | accessible-for-notify | current |
| trpzClientAssociationFailureCause OBJECT-TYPE The client association failure cause. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.25 | TrpzAssociationFailureType | accessible-for-notify | current |
| trpzClientAuthenticationFailureCause OBJECT-TYPE The client authentication failure cause. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.26 | TrpzAuthenticationFailureType | accessible-for-notify | current |
| trpzClientAuthorizationFailureCause OBJECT-TYPE The client authorization failure cause. Note that if it is the user-param, we would additionally expect the failure cause description to list the user attribute value that caused the failure. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.27 | TrpzAuthorizationFailureType | accessible-for-notify | current |
| trpzClientFailureCauseDescription OBJECT-TYPE Display string for describing the client failure cause. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.28 | DisplayString (SIZE(0..255)) | accessible-for-notify | current |
| trpzClientRoamedFromWsIp OBJECT-TYPE The system IP address of the AC (wireless switch) a client roamed from. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.29 | IpAddress | accessible-for-notify | obsolete |
| trpzClientRoamedFromAccessType OBJECT-TYPE The client access type (ap, dap, wired) that a client roamed from. This object is used within notifications and is not accessible. Obsoleted by 'trpzClientRoamedFromAccessMode'. | 1.3.6.1.4.1.14525.2.30 | TrpzAccessType | accessible-for-notify | obsolete |
| trpzClientAccessType OBJECT-TYPE The client access type (ap, dap, wired). This object is used within notifications and is not accessible. For new traps, use trpzClientAccessMode instead of this object. | 1.3.6.1.4.1.14525.2.31 | TrpzAccessType | accessible-for-notify | current |
| trpzRadioMACAddress OBJECT-TYPE AP Radio MAC address. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.32 | MacAddress | accessible-for-notify | current |
| trpzRadioPowerChangeReason OBJECT-TYPE The type of event that caused an AP radio power change; occurs due to auto-tune operation. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.33 | TrpzRadioPowerChangeType | accessible-for-notify | current |
| trpzNewChannelNum OBJECT-TYPE New channel number of the AP radio used after an auto tune event. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.34 | INTEGER (1..1024) | accessible-for-notify | current |
| trpzOldChannelNum OBJECT-TYPE Old channel number of the AP radio used before an auto tune event. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.35 | INTEGER (1..1024) | accessible-for-notify | current |
| trpzChannelChangeReason OBJECT-TYPE The type of event that caused an AP radio channel change; occurs due to auto-tune operation. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.36 | TrpzChannelChangeType | accessible-for-notify | current |
| trpzRFDetectListenerListInfo OBJECT-TYPE The RF Detection Listener list info including a list of (listener mac, rssi, channel, ssid, time). There will be a maximum of 6 entries in the list. Formats: MAC: 18 bytes: %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X RSSI: 10 bytes: %10d CHANNEL: 3 bytes: %3d SSID: 32 bytes: %s TIME: 26 bytes: %s Maximum size per entry is 89+4+2 = 95 bytes. Maximum size of the string is 6*95= 571 bytes (include NULL). This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.37 | OCTET STRING (SIZE(0..571)) | accessible-for-notify | current |
| trpzRadioSSID OBJECT-TYPE The radio SSID string This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.38 | DisplayString (SIZE(0..32)) | accessible-for-notify | current |
| trpzNewPowerLevel OBJECT-TYPE New power level of the AP radio used after an auto tune event. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.39 | TrpzPowerLevel | accessible-for-notify | current |
| trpzOldPowerLevel OBJECT-TYPE Old power level of the AP radio used before an auto tune event. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.40 | TrpzPowerLevel | accessible-for-notify | current |
| trpzRadioPowerChangeDescription OBJECT-TYPE The radio power change description. In the case of reason being dup-pkts-threshold-exceed(1), and retransmit-threshold-exceed(2), clientMacAddress will be included in the description. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.41 | DisplayString (SIZE(0..255)) | accessible-for-notify | current |
| trpzCounterMeasurePerformerListInfo OBJECT-TYPE A list of information for APs performing Counter Measures including a list of performer mac addresses. This object is used within notifications and is not accessible. Not used by any notification. | 1.3.6.1.4.1.14525.2.42 | DisplayString (SIZE(0..255)) | accessible-for-notify | obsolete |
| trpzClientDot1xState OBJECT-TYPE The state for a client 802.1X. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.43 | TrpzClientDot1xState | accessible-for-notify | current |
| trpzClientDot1xFailureCause OBJECT-TYPE The client 802.1X failure cause. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.44 | TrpzDot1xFailureType | accessible-for-notify | current |
| trpzAPAccessType OBJECT-TYPE The access point access type (ap, dap,). This object is used within notifications and is not accessible. Not used by any notification. | 1.3.6.1.4.1.14525.2.45 | TrpzAccessType | accessible-for-notify | obsolete |
| trpzUserAccessType OBJECT-TYPE The user access type (MAC, WEB, DOT1X, LAST-RESORT). This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.46 | TrpzUserAccessType | accessible-for-notify | current |
| trpzClientSessionElapsedTime OBJECT-TYPE The elapsed time for a client session. Obsoleted because session time is usually reported in seconds. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.47 | TimeTicks | accessible-for-notify | obsolete |
| trpzLocalId OBJECT-TYPE Local Id for the session. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.48 | INTEGER (1..65000) | accessible-for-notify | current |
| trpzRFDetectDoSType OBJECT-TYPE The type of denial of service (DoS) attack. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.49 | TrpzRFDetectDoSType | accessible-for-notify | current |
| trpzSourceWsIp OBJECT-TYPE IP address of another AC (wireless switch). This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.50 | IpAddress | accessible-for-notify | current |
| trpzClientVLANid OBJECT-TYPE VLAN ID used by client traffic. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.51 | INTEGER (0..4095) | accessible-for-notify | current |
| trpzClientVLANtag OBJECT-TYPE VLAN tag used by client traffic. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.52 | INTEGER (0..4095) | accessible-for-notify | current |
| trpzDeviceModel OBJECT-TYPE The model of a device in printable US-ASCII. If unknown (or not available), then the value is a zero length string. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.53 | DisplayString | accessible-for-notify | current |
| trpzDeviceSerNum OBJECT-TYPE The serial number of an AP in printable US-ASCII. If unknown (or not available), then the value is a zero length string. Should NOT be used to identify other devices, for example an AC (wireless switch). This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.54 | TrpzApSerialNum | accessible-for-notify | current |
| trpzRsaPubKeyFingerPrint OBJECT-TYPE The hash of the RSA public key (of a key pair) in binary form that uniquely identifies the public key of an AP. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.55 | TrpzApFingerprint | accessible-for-notify | current |
| trpzDAPconnectWarningType OBJECT-TYPE The type of DAP connect warning. The values are: not-configured-fingerprint-connect(1)...a DAP, which has an RSA keypair but did not have its fingerprint configured on the AC, has connected to the AC when 'dap security' set to 'OPTIONAL' secure-handshake-failure(2).............a DAP tried to connect to the AC with security, but the handshake failed not-configured-fingerprint-required(3)..a DAP tried to connect to the AC with security, but 'dap security' set to 'REQUIRED', and no fingerprint was configured for the DAP fingerprint-mismatch(4).................a DAP tried to connect to the AC with security and its fingerprint was configured, but the fingerprint did not match the computed one This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.56 | INTEGER {not-configured-fingerprint-connect(1), secure-handshake-failure(2), not-configured-fingerprint-required(3), fingerprint-mismatch(4)} | accessible-for-notify | current |
| trpzClientMACAddress2 OBJECT-TYPE MAC address of the second client of interest. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.57 | MacAddress | accessible-for-notify | current |
| trpzApAttachType OBJECT-TYPE How the AP is attached to the AC (directly or via L2/L3 network). This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.58 | TrpzApAttachType | accessible-for-notify | current |
| trpzApPortOrDapNum OBJECT-TYPE The Port Number if the AP is directly attached, or the CLI-assigned DAP Number if attached via L2/L3 network. This object is used within notifications and is not accessible. Obsoleted by trpzApNum. (In 6.0, direct- and network-attached APs were unified.) | 1.3.6.1.4.1.14525.2.59 | TrpzApPortOrDapNum | accessible-for-notify | obsolete |
| trpzApName OBJECT-TYPE The name of the AP, as assigned in AC's CLI; defaults to AP<Number> (examples: 'AP01', 'AP22', 'AP333', 'AP4444'); could have been changed from CLI to a meaningful name, for example the location of the AP (example: 'MeetingRoom73'). This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.60 | DisplayString | accessible-for-notify | current |
| trpzApTransition OBJECT-TYPE AP state Transition, as seen by the AC. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.61 | TrpzApTransition | accessible-for-notify | current |
| trpzApFailDetail OBJECT-TYPE Detailed failure code for some of the transitions specified in 'trpzApTransition' object. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.62 | TrpzApFailDetail | accessible-for-notify | current |
| trpzRadioType OBJECT-TYPE Indicates the AP Radio Type, as seen by AC. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.63 | TrpzRadioType | accessible-for-notify | current |
| trpzRadioConfigState OBJECT-TYPE Indicates the Radio State, as seen by the AC. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.64 | TrpzRadioConfigState | accessible-for-notify | current |
| trpzApConnectSecurityType OBJECT-TYPE Indicates the security level of the connection between AP and AC. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.65 | TrpzApConnectSecurityType | accessible-for-notify | current |
| trpzApServiceAvailability OBJECT-TYPE Indicates the level of wireless service availability. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.66 | TrpzApServiceAvailability | accessible-for-notify | current |
| trpzApWasOperational OBJECT-TYPE Indicates whether the AP was operational before a transition occurred. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.67 | TrpzApWasOperational | accessible-for-notify | current |
| trpzClientTimeSinceLastRoam OBJECT-TYPE The time in seconds since the most recent roam of a given client. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.68 | Unsigned32 | accessible-for-notify | current |
| trpzClientIpAddrChangeReason OBJECT-TYPE Indicates the reason why client IP address changed. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.69 | TrpzClientIpAddrChangeReason | accessible-for-notify | current |
| trpzRFDetectRogueAPMacAddr OBJECT-TYPE Describes the MAC address of the Rogue AP the transmitter is connected to. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.70 | MacAddress | accessible-for-notify | current |
| trpzBlacklistingRemainingTime OBJECT-TYPE The time in seconds remaining until a given transmitter could be removed from the Black List. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.71 | Unsigned32 | accessible-for-notify | current |
| trpzBlacklistingCause OBJECT-TYPE Indicates the reason why a given transmitter is blacklisted. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.72 | TrpzBlacklistingCause | accessible-for-notify | current |
| trpzNumLicensedActiveAPs OBJECT-TYPE Indicates the maximum (licensed) number of active APs for this AC. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.73 | Unsigned32 | accessible-for-notify | current |
| trpzClientDynAuthorClientIp OBJECT-TYPE The dynamic authorization client IP address which caused the change of authorization. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.74 | IpAddress | accessible-for-notify | current |
| trpzChangedUserParamOldValues OBJECT-TYPE A display string listing the changed AAA attributes and their values, before the change of authorization was executed. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.75 | TrpzUserAttributeList | accessible-for-notify | current |
| trpzChangedUserParamNewValues OBJECT-TYPE A display string listing the changed AAA attributes and their values, after the change of authorization was executed. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.76 | TrpzUserAttributeList | accessible-for-notify | current |
| trpzClientDisconnectSource OBJECT-TYPE The external source that initiated the termination of a session. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.77 | TrpzSessionDisconnectType | accessible-for-notify | current |
| trpzClientDisconnectDescription OBJECT-TYPE Display string for providing available information related to the external source that initiated a session termination. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.78 | DisplayString (SIZE(0..255)) | accessible-for-notify | current |
| trpzMobilityDomainSecondarySeedIp OBJECT-TYPE The secondary seed IP address to which the Mobility Domain has failed over. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.79 | IpAddress | accessible-for-notify | current |
| trpzMobilityDomainPrimarySeedIp OBJECT-TYPE The primary seed IP address to which the Mobility Domain has failed back. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.80 | IpAddress | accessible-for-notify | current |
| trpzRFDetectClassificationReason OBJECT-TYPE Indicates the reason why a RF device is classified the way it is. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.81 | TrpzRFDetectClassificationReason | accessible-for-notify | current |
| trpzConfigSaveFileName OBJECT-TYPE Display string listing the name of the file to which the running configuration was saved. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.82 | DisplayString (SIZE(0..255)) | accessible-for-notify | current |
| trpzConfigSaveInitiatorType OBJECT-TYPE Indicates the source that initiated a configuration save. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.83 | TrpzConfigSaveInitiatorType | accessible-for-notify | current |
| trpzConfigSaveInitiatorIp OBJECT-TYPE The IP address of the source that initiated a configuration save. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.84 | IpAddress | accessible-for-notify | current |
| trpzConfigSaveInitiatorDetails OBJECT-TYPE Display string listing additional information regarding the source that initiated a configuration save, when available. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.85 | DisplayString (SIZE(0..255)) | accessible-for-notify | current |
| trpzConfigSaveGeneration OBJECT-TYPE Indicates the number of configuration changes since the last system boot. The generation count is used to track the number of times the running configuration has been changed due to administrative actions (set/clear), SNMP requests (SET), XML requests (e.g. RingMaster). This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.86 | Counter32 | accessible-for-notify | current |
| trpzApNum OBJECT-TYPE The administratively assigned AP Number, unique on same AC (switch), regardless of how APs are attached to the AC. This object is used within notifications and is not accessible. Obsoletes trpzApPortOrDapNum. For clarity, use this object to identify an AP since in 6.0 directly attached APs and DAPs were unified. | 1.3.6.1.4.1.14525.2.87 | TrpzApNum | accessible-for-notify | current |
| trpzRadioMode OBJECT-TYPE Indicates the administratively controlled Radio Mode (enabled/disabled/sentry). This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.88 | TrpzRadioMode | accessible-for-notify | current |
| trpzMichaelMICFailureCause OBJECT-TYPE Indicates the Michael MIC Failure cause / who detected it. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.89 | TrpzMichaelMICFailureCause | accessible-for-notify | current |
| trpzClientAccessMode OBJECT-TYPE The client access mode (ap, wired). This object is used within notifications and is not accessible. Intended to replace trpzClientAccessType. (In 6.0, direct- and network-attached APs were unified.) | 1.3.6.1.4.1.14525.2.90 | TrpzClientAccessMode | accessible-for-notify | current |
| trpzClientAuthorizationReason OBJECT-TYPE Indicates the reason why client performed AAA authorization. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.91 | TrpzClientAuthorizationReason | accessible-for-notify | current |
| trpzPhysPortNum OBJECT-TYPE Physical Port Number on the AC. Zero means the port is unknown or not applicable (for example, when trpzClientAccessMode = 'ap'). This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.92 | TrpzPhysPortNumberOrZero | accessible-for-notify | current |
| trpzApMgrOldIp OBJECT-TYPE The IP address of the AP's former primary manager switch. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.93 | IpAddress | accessible-for-notify | current |
| trpzApMgrNewIp OBJECT-TYPE The IP address of the AP's new primary manager switch. This address was formerly the AP's secondary backup link. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.94 | IpAddress | accessible-for-notify | current |
| trpzApMgrChangeReason OBJECT-TYPE Indicates the reason why the AP's primary manager changed. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.95 | TrpzApMgrChangeReason | accessible-for-notify | current |
| trpzClientClearedReason OBJECT-TYPE Indicates the reason why client was cleared. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.96 | TrpzClientClearedReason | accessible-for-notify | current |
| trpzMobilityDomainResiliencyStatus OBJECT-TYPE Indicates the current resilient capacity status for a mobility domain. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.97 | TrpzMobilityDomainResiliencyStatus | accessible-for-notify | current |
| trpzClientSessionElapsedSeconds OBJECT-TYPE Indicates the time in seconds elapsed since the start of the Client Session. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.98 | Unsigned32 | accessible-for-notify | current |
| trpzRadioChannelWidth OBJECT-TYPE Indicates the administratively controlled Channel Width (20MHz/40MHz). This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.99 | TrpzRadioChannelWidth | accessible-for-notify | current |
| trpzRadioMimoState OBJECT-TYPE Indicates the Radio MIMO State, as seen by the AC (1x1/2x3/3x3). This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.100 | TrpzRadioMimoState | accessible-for-notify | current |
| trpzClientRadioType OBJECT-TYPE Indicates the Client Radio Type, as detected by an attached AP and reported to the AC. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.101 | TrpzRadioType | accessible-for-notify | current |
| trpzRFDetectXmtrRadioType OBJECT-TYPE Indicates the Radio Type of the Transmitter, as detected by an attached AP and reported to the AC. The Transmitter may be a wireless client or an AP. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.102 | TrpzRadioType | accessible-for-notify | current |
| trpzRFDetectXmtrCryptoType OBJECT-TYPE Indicates the Crypto Type used by the Transmitter, as detected by an attached AP and reported to the AC. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.103 | TrpzCryptoType | accessible-for-notify | current |
| trpzClusterFailureReason OBJECT-TYPE Indicates the reason why cluster configuration failed to apply. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.104 | TrpzClusterFailureReason | accessible-for-notify | current |
| trpzClusterFailureDescription OBJECT-TYPE Display string for describing the cluster configuration failure cause. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.105 | DisplayString (SIZE(0..255)) | accessible-for-notify | current |
| trpzMultimediaCommunicationServerID OBJECT-TYPE The multimedia communication server ID. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.106 | DisplayString (SIZE(0..255)) | accessible-for-notify | current |
| trpzMultimediaLocalStationIp OBJECT-TYPE The local multimedia station IP address. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.107 | IpAddress | accessible-for-notify | current |
| trpzMultimediaLocalStationPort OBJECT-TYPE The local multimedia station UDP port. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.108 | TrpzIpPort | accessible-for-notify | current |
| trpzMultimediaLocalStationEndpointID OBJECT-TYPE The local multimedia station endpoint ID. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.109 | DisplayString (SIZE(0..255)) | accessible-for-notify | current |
| trpzMultimediaRemoteStationIp OBJECT-TYPE The remote multimedia station IP address. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.110 | IpAddress | accessible-for-notify | current |
| trpzMultimediaRemoteStationPort OBJECT-TYPE The remote multimedia station UDP port. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.111 | TrpzIpPort | accessible-for-notify | current |
| trpzMultimediaRemoteStationEndpointID OBJECT-TYPE The remote multimedia station endpoint ID. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.112 | DisplayString (SIZE(0..255)) | accessible-for-notify | current |
| trpzMultimediaSignalingProtocol OBJECT-TYPE The multimedia signaling protocol that was used for initiating this call (session). This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.113 | TrpzMultimediaSignalingProtocol | accessible-for-notify | current |
| trpzMultimediaCallBandwidthAndCodec OBJECT-TYPE Display string providing information about the multimedia call codec and bandwidth. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.114 | DisplayString (SIZE(0..255)) | accessible-for-notify | current |
| trpzMultimediaCallDataRate OBJECT-TYPE The data rate, in Kbps. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.115 | Unsigned32 | accessible-for-notify | current |
| trpzMultimediaCallRssi OBJECT-TYPE The client RSSI (Received Signal Strength Indicator), in decibels referred to 1 milliwatt (dBm). A higher value indicates a stronger signal. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.116 | TrpzRssi | accessible-for-notify | current |
| trpzMultimediaCallFailureReason OBJECT-TYPE Indicates the reason why the multimedia call has failed. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.117 | TrpzMultimediaCallFailureReason | accessible-for-notify | current |
| trpzMultimediaCallDirection OBJECT-TYPE Indicates the multimedia call direction (incoming/outgoing). This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.118 | TrpzMultimediaCallDirection | accessible-for-notify | current |
| trpzApTunnelLimit OBJECT-TYPE Indicates the maximum number of tunnels supported for an AP. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.119 | Unsigned32 | accessible-for-notify | current |
| trpzWsTunnelLimit OBJECT-TYPE Indicates the maximum number of tunnels supported for an AC (wireless switch). This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.120 | Unsigned32 | accessible-for-notify | current |
| trpzWsTunnelLimitType OBJECT-TYPE Indicates the type of limit exceeded that caused the AC (wireless switch) to reject a tunnel creation request. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.121 | TrpzWsTunnelLimitType | accessible-for-notify | current |
| trpzRFNoiseSourceID OBJECT-TYPE RF Noise Source ID. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.122 | TrpzRFNoiseSourceID | accessible-for-notify | current |
| trpzRFNoiseSourceType OBJECT-TYPE RF Noise Source Type. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.123 | TrpzRFNoiseSourceType | accessible-for-notify | current |
| trpzRFNoiseChannel OBJECT-TYPE Channel number. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.124 | TrpzChannelNum | accessible-for-notify | current |
| trpzRFNoiseRssi OBJECT-TYPE The noise RSSI (Received Signal Strength Indicator), in decibels referred to 1 milliwatt (dBm). A higher value indicates stronger noise. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.125 | TrpzRssi | accessible-for-notify | current |
| trpzRFNoiseDutyCycle OBJECT-TYPE Estimated Duty Cycle: fraction of time that a noise source is transmitting. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.126 | Unsigned32 | accessible-for-notify | current |
| trpzRFNoiseChannelInterferenceMeasure OBJECT-TYPE Severity of channel interference attributed to a noise source. A higher value indicates more severe interference. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.127 | Unsigned32 | accessible-for-notify | current |
| trpzRFNoiseAge OBJECT-TYPE Age of noise in seconds. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.128 | Unsigned32 | accessible-for-notify | current |
| trpzM2UMulticastAddrType OBJECT-TYPE The address type of 'trpzM2UMulticastAddr'. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.129 | InetAddressType | accessible-for-notify | current |
| trpzM2UMulticastAddr OBJECT-TYPE The multicast address for which conversion to unicast is performed. The type of this address is specified in 'trpzM2UMulticastAddrType'. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.130 | InetAddress | accessible-for-notify | current |
| trpzM2UConvNotPossibleReason OBJECT-TYPE Indicates the reason why multicast to unicast conversion cannot be performed on an AP with this feature enabled. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.131 | TrpzM2UConvNotPossibleReason | accessible-for-notify | current |
| trpzRadioBand OBJECT-TYPE Indicates the radio band used in an auto-tune operation. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.132 | TrpzRadioBand | accessible-for-notify | current |
| trpzRadiosTunedCount OBJECT-TYPE Indicates how many radios had their operational characteristics changed as a result of an auto-tune process. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.133 | Unsigned32 | accessible-for-notify | current |
| trpzAutoTuneFailureReason OBJECT-TYPE Indicates the reason why an auto-tune operation failed to complete. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.134 | TrpzAutoTuneFailureReason | accessible-for-notify | current |
| trpzClientAuthServerAddrType OBJECT-TYPE The address type of 'trpzClientAuthServerAddr'. Only the value 'ipv4(1)' is reported as of release 8.0. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.135 | InetAddressType | accessible-for-notify | current |
| trpzClientAuthServerAddr OBJECT-TYPE The Internet address of the client authentication server. The type of this address is specified in 'trpzClientAuthServerAddrType'. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.136 | InetAddress | accessible-for-notify | current |
| trpzClientRoamedFromWsAddrType OBJECT-TYPE The address type of 'trpzClientRoamedFromWsAddr'. Only the value 'ipv4(1)' is reported as of release 8.0. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.137 | InetAddressType | accessible-for-notify | current |
| trpzClientRoamedFromWsAddr OBJECT-TYPE The system IP address of the AC (wireless switch) a client roamed from. The type of this address is specified in 'trpzClientRoamedFromWsAddrType'. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.138 | InetAddress | accessible-for-notify | current |
| trpzClientDynAuthorClientAddrType OBJECT-TYPE The address type of 'trpzClientDynAuthorClientAddr'. Only the value 'ipv4(1)' is reported as of release 8.0. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.139 | InetAddressType | accessible-for-notify | current |
| trpzClientDynAuthorClientAddr OBJECT-TYPE The dynamic authorization client IP address which caused the change of authorization. The type of this address is specified in 'trpzClientDynAuthorClientAddrType'. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.140 | InetAddress | accessible-for-notify | current |
| trpzClientIpAddrType OBJECT-TYPE The address type of 'trpzClientIpAddr'. Only the values 'ipv4(1)' and 'ipv6(2)' are reported. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.141 | InetAddressType | accessible-for-notify | current |
| trpzClientIpAddr OBJECT-TYPE Indicates an IP address of the client. The type of this address is specified in 'trpzClientIpAddrType'. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.142 | InetAddress | accessible-for-notify | current |
| trpzClientIPv4Addr OBJECT-TYPE The IPv4 address of the client. If the client does not use the IPv4 stack, or its IPv4 address has not yet been detected, then all octets will have the value 0. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.143 | InetAddressIPv4 | accessible-for-notify | current |
| trpzClientIPv6LinkLocalAddr OBJECT-TYPE The IPv6 link-local address of the client. If the client does not use the IPv6 stack, or its IPv6 link-local address has not yet been detected, then all octets will have the value 0. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.144 | InetAddressIPv6 | accessible-for-notify | current |
| trpzApRadioIndex OBJECT-TYPE AP Radio index. Intended to replace 'trpzAPRadioNum'. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.145 | TrpzApRadioIndex | accessible-for-notify | current |
| trpzClientRoamedFromAccessMode OBJECT-TYPE The client access mode (ap, wired) that a client roamed from. This object is used within notifications and is not accessible. Obsoletes 'trpzClientRoamedFromAccessType'. (In 6.0, direct- and network-attached APs were unified.) | 1.3.6.1.4.1.14525.2.146 | TrpzClientAccessMode | accessible-for-notify | current |
| trpzClientRoamedFromApNum OBJECT-TYPE The number of the AP the client roamed from. Obsoletes 'trpzClientRoamedFromDAPNum'. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.147 | TrpzApNum | accessible-for-notify | current |
| trpzClientRoamedFromRadioIndex OBJECT-TYPE The index of the AP Radio the client roamed from. Obsoletes 'trpzClientRoamedFromRadioNum'. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.148 | TrpzApRadioIndex | accessible-for-notify | current |
| trpzClientRoamedFromPhysPortNum OBJECT-TYPE Identifies the physical port on the AC used by the wired-auth client, before roam. Zero means the port is unknown or not applicable (for example, when trpzClientRoamedFromAccessMode = 'ap'). Obsoletes 'trpzClientRoamedFromPortNum'. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.149 | TrpzPhysPortNumberOrZero | accessible-for-notify | current |
| trpzClientDeviceType OBJECT-TYPE The type of the client device. Is a zero length string if unknown. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.150 | TrpzClientDeviceType | accessible-for-notify | current |
| trpzClientDeviceTypeOld OBJECT-TYPE The type of the client device, before change. Is a zero length string if unknown. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.151 | TrpzClientDeviceType | accessible-for-notify | current |
| trpzClientDeviceGroup OBJECT-TYPE The group that the detected client device type belongs to. Is a zero length string if the device type is unknown. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.152 | TrpzClientDeviceGroupName | accessible-for-notify | current |
| trpzClientDeviceProfileName OBJECT-TYPE The name of the device profile associated with the detected client device. A device profile is a collection of policies that apply to one or more types of client devices. Is a zero length string in 'detect-only' mode or if not set. In 'detect-only' mode policy enforcement is disabled. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.153 | TrpzClientDeviceProfileName | accessible-for-notify | current |
| trpzClientDeviceProfileNameOld OBJECT-TYPE The name of the device profile associated with the detected client device, before change. A device profile is a collection of policies that apply to one or more types of client devices. Is a zero length string in 'detect-only' mode or if not set. In 'detect-only' mode policy enforcement is disabled. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.154 | TrpzClientDeviceProfileName | accessible-for-notify | current |
| trpzClientDeviceProfileChangeReason OBJECT-TYPE The reason why the device profile changed. This object is used within notifications and is not accessible. | 1.3.6.1.4.1.14525.2.155 | TrpzClientDeviceProfileChangeReason | accessible-for-notify | current |
| trpzTrapsV2 OBJECT-IDENTITY | 1.3.6.1.4.1.14525.5.0 |
Notifications
| Name | OID | Status |
|---|---|---|
| trpzDeviceFailTrap NOTIFICATION-TYPE The device has a failure indication | 1.3.6.1.4.1.14525.5.0.1 | current |
| trpzDeviceOkayTrap NOTIFICATION-TYPE The device has recovered | 1.3.6.1.4.1.14525.5.0.2 | current |
| trpzPoEFailTrap NOTIFICATION-TYPE PoE has failed on the indicated port | 1.3.6.1.4.1.14525.5.0.3 | current |
| trpzApTimeoutTrap NOTIFICATION-TYPE The AP entering the AC at port trpzPortNum with MAC trpzRadioMacAddress and of the access type (ap or dap) has not responded. Replaced by trpzApNonOperStatusTrap2, with trpzApTransition = 'timeout'. | 1.3.6.1.4.1.14525.5.0.4 | obsolete |
| trpzAPBootTrap NOTIFICATION-TYPE The AP entering the AC at port trpzPortNum with MAC trpzRadioMacAddress and of the access type (ap or dap) has booted. Replaced by trpzApNonOperStatusTrap2, with trpzApTransition = 'bootSuccess'. | 1.3.6.1.4.1.14525.5.0.5 | obsolete |
| trpzMobilityDomainJoinTrap NOTIFICATION-TYPE The mobility domain member has received an UP notice from the remote address. | 1.3.6.1.4.1.14525.5.0.6 | current |
| trpzMobilityDomainTimeoutTrap NOTIFICATION-TYPE The mobility domain member has declared the remote address to be DOWN. | 1.3.6.1.4.1.14525.5.0.7 | current |
| trpzMpMichaelMICFailure NOTIFICATION-TYPE Two Michael MIC failures were seen within 60 seconds of each other. Obsoleted by trpzMichaelMICFailure. | 1.3.6.1.4.1.14525.5.0.8 | obsolete |
| trpzRFDetectRogueAPTrap NOTIFICATION-TYPE This trap is sent when RF detection finds a rogue AP. XmtrMacAddr is the radio MAC address from the beacon. ListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectRogueDeviceTrap2. | 1.3.6.1.4.1.14525.5.0.9 | obsolete |
| trpzRFDetectAdhocUserTrap NOTIFICATION-TYPE This trap is sent when RF detection sweep finds a ad-hoc user. trpzRFDetectXmtrMacAddr is the MAC address of the ad-hoc user. trpzRFDetectListenerListInfo is a display string of a list of listener information. | 1.3.6.1.4.1.14525.5.0.10 | current |
| trpzRFDetectRogueDisappearTrap NOTIFICATION-TYPE This trap is sent when a rogue has disappeared. Obsoleted by trpzRFDetectRogueDeviceDisappearTrap. | 1.3.6.1.4.1.14525.5.0.11 | obsolete |
| trpzClientAuthenticationFailureTrap NOTIFICATION-TYPE This trap is sent if a client authentication fails. | 1.3.6.1.4.1.14525.5.0.12 | current |
| trpzClientAuthorizationFailureTrap NOTIFICATION-TYPE This trap is sent if a client authorization fails. | 1.3.6.1.4.1.14525.5.0.13 | current |
| trpzClientAssociationFailureTrap NOTIFICATION-TYPE This trap is sent if a client association fails. | 1.3.6.1.4.1.14525.5.0.14 | current |
| trpzClientAuthorizationSuccessTrap NOTIFICATION-TYPE This trap is sent when a client authorizes. Obsoleted by trpzClientAuthorizationSuccessTrap5. | 1.3.6.1.4.1.14525.5.0.15 | obsolete |
| trpzClientDeAssociationTrap NOTIFICATION-TYPE This trap is sent if a client de-association occurred. Obsoleted by trpzClientDeAssociationTrap2. | 1.3.6.1.4.1.14525.5.0.16 | obsolete |
| trpzClientRoamingTrap NOTIFICATION-TYPE This trap is sent if a client roams from one location to another. Obsoleted by trpzClientRoamingTrap2. | 1.3.6.1.4.1.14525.5.0.17 | obsolete |
| trpzAutoTuneRadioPowerChangeTrap NOTIFICATION-TYPE This trap is sent if a radio's power level has changed based on auto-tune. | 1.3.6.1.4.1.14525.5.0.18 | current |
| trpzAutoTuneRadioChannelChangeTrap NOTIFICATION-TYPE This trap is sent if a radio's channel has changed based on auto-tune. | 1.3.6.1.4.1.14525.5.0.19 | current |
| trpzCounterMeasureStartTrap NOTIFICATION-TYPE This trap is sent when counter measures are started against a rogue. trpzRFDetectXmtrMacAddr is the mac address of the rogue we are doing counter measures against. trpzRadioMACAddress identifies the radio performing the countermeasures. | 1.3.6.1.4.1.14525.5.0.20 | current |
| trpzCounterMeasureStopTrap NOTIFICATION-TYPE This trap is sent when counter measures are stopped against a rogue. trpzRFDetectXmtrMacAddr is the mac address of the rogue we were doing counter measures against. trpzRadioMACAddress identifies the radio performing the countermeasures. | 1.3.6.1.4.1.14525.5.0.21 | current |
| trpzClientDot1xFailureTrap NOTIFICATION-TYPE This trap is sent if a client failed 802.1X. | 1.3.6.1.4.1.14525.5.0.22 | current |
| trpzClientClearedTrap NOTIFICATION-TYPE This trap is sent when a client session is cleared. Obsoleted by trpzClientClearedTrap3. | 1.3.6.1.4.1.14525.5.0.23 | obsolete |
| trpzClientAuthorizationSuccessTrap2 NOTIFICATION-TYPE This trap is sent when a client authorizes. Obsoleted by trpzClientAuthorizationSuccessTrap5. | 1.3.6.1.4.1.14525.5.0.24 | obsolete |
| trpzRFDetectSpoofedMacAPTrap NOTIFICATION-TYPE This trap is sent when RF detection finds an AP using the MAC of the listener. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectDoSTrap and trpzRFDetectRogueDeviceTrap2. One of the two traps will be sent depending on the type of AP MAC spoofing detected. | 1.3.6.1.4.1.14525.5.0.25 | obsolete |
| trpzRFDetectSpoofedSsidAPTrap NOTIFICATION-TYPE This trap is sent when RF detection finds an AP using the SSID of the listener, and the AP is not in the mobility domain. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectRogueDeviceTrap2 and trpzRFDetectSuspectDeviceTrap2. One of the two traps will be sent, depending on RF detection classification rules. | 1.3.6.1.4.1.14525.5.0.26 | obsolete |
| trpzRFDetectDoSTrap NOTIFICATION-TYPE This trap is sent when RF detection finds a denial of service (DoS) occurring. trpzRFDetectDoSType specifies the type of DoS. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. | 1.3.6.1.4.1.14525.5.0.27 | current |
| trpzRFDetectClientViaRogueWiredAPTrap NOTIFICATION-TYPE This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. trpzSourceWsIp is the IP address of the AC (switch) with the wired port. trpzPortNum is the port on the AC. trpzClientVLANid is the VLAN ID of the client's traffic. trpzClientVLANtag is the VLAN tag of the client's traffic. trpzRFDetectXmtrMacAddr is the MAC address of the client. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectClientViaRogueWiredAPTrap3. | 1.3.6.1.4.1.14525.5.0.28 | obsolete |
| trpzRFDetectInterferingRogueAPTrap NOTIFICATION-TYPE This trap is sent when RF detection finds an interfering rogue AP. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectSuspectDeviceTrap2. | 1.3.6.1.4.1.14525.5.0.29 | obsolete |
| trpzRFDetectInterferingRogueDisappearTrap NOTIFICATION-TYPE This trap is sent when an interfering rogue has disappeared. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. Obsoleted by trpzRFDetectSuspectDeviceDisappearTrap. | 1.3.6.1.4.1.14525.5.0.30 | obsolete |
| trpzRFDetectUnAuthorizedSsidTrap NOTIFICATION-TYPE This trap is sent when RF detection finds use of an unauthorized SSID. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectRogueDeviceTrap2 and trpzRFDetectSuspectDeviceTrap2. One of the two traps will be sent if the device having an unauthorized SSID is classified as rogue or suspect because of this. | 1.3.6.1.4.1.14525.5.0.31 | obsolete |
| trpzRFDetectUnAuthorizedOuiTrap NOTIFICATION-TYPE This trap is sent when RF detection finds use of an unauthorized OUI. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectRogueDeviceTrap2 and trpzRFDetectSuspectDeviceTrap2. One of the two traps will be sent if the device having an unauthorized OUI is classified as rogue or suspect because of this. | 1.3.6.1.4.1.14525.5.0.32 | obsolete |
| trpzRFDetectUnAuthorizedAPTrap NOTIFICATION-TYPE This trap is sent when RF detection finds operation of an unauthorized AP. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectRogueDeviceTrap2. | 1.3.6.1.4.1.14525.5.0.33 | obsolete |
| trpzDAPConnectWarningTrap NOTIFICATION-TYPE A DAP, tried to connect to the AC. trpzDeviceModel provides the model of the DAP. trpzDeviceSerNum provides the serial number of the DAP. trpzRsaPubKeyFingerPrint provides the computed fingerprint of the DAP. trpzDAPconnectWarningType provides the type of connect warning. Replaced by trpzApNonOperStatusTrap2, with trpzApTransition = 'connectFail'. | 1.3.6.1.4.1.14525.5.0.34 | obsolete |
| trpzRFDetectDoSPortTrap NOTIFICATION-TYPE This trap is sent when RF detection finds a denial of service (DoS) occurring. This has port and AP info instead of 'Listener info'. trpzRFDetectDoSType specifies the type of DoS. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzClientAccessType specifies whether wired, AP, or DAP. trpzPortNum (for wired or AP), the port that is used. trpzDAPNum (for a DAP), the ID of the DAP. | 1.3.6.1.4.1.14525.5.0.35 | current |
| trpzMpMichaelMICFailure2 NOTIFICATION-TYPE Two Michael MIC failures were seen within 60 seconds of each other. Object trpzClientMACAddress is the source of the first failure, and object trpzClientMACAddress2 source of the second failure. Obsoleted by trpzMichaelMICFailure. | 1.3.6.1.4.1.14525.5.0.36 | obsolete |
| trpzApNonOperStatusTrap NOTIFICATION-TYPE This trap is sent when the AP changes state and the new one is a non-operational state. Obsoleted by trpzApNonOperStatusTrap2. | 1.3.6.1.4.1.14525.5.0.37 | obsolete |
| trpzApOperRadioStatusTrap NOTIFICATION-TYPE This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availability. Obsoleted by trpzApOperRadioStatusTrap3. | 1.3.6.1.4.1.14525.5.0.38 | obsolete |
| trpzClientIpAddrChangeTrap NOTIFICATION-TYPE This trap is sent when a client's IP address changes. The most likely case for this is when the client first connects to the network. Obsoleted by trpzClientIpAddrChangeTrap2. | 1.3.6.1.4.1.14525.5.0.39 | obsolete |
| trpzClientAssociationSuccessTrap NOTIFICATION-TYPE This trap is sent if a client association succeeds. WARNING: DO NOT enable it in normal use. It may impair switch performance! Only recommended for debugging network issues. | 1.3.6.1.4.1.14525.5.0.40 | current |
| trpzClientAuthenticationSuccessTrap NOTIFICATION-TYPE This trap is sent if a client authentication succeeds. | 1.3.6.1.4.1.14525.5.0.41 | current |
| trpzClientDeAuthenticationTrap NOTIFICATION-TYPE This trap is sent if a client de-authentication occurred. Obsoleted by trpzClientDeAuthenticationTrap2. | 1.3.6.1.4.1.14525.5.0.42 | obsolete |
| trpzRFDetectBlacklistedTrap NOTIFICATION-TYPE This trap is sent if an association, re-association or de-association request (packet) is detected from a blacklisted transmitter (identified by MAC: 'trpzRFDetectXmtrMacAddr'). If 'trpzBlacklistingCause' is 'configured', then 'trpzBlacklistingRemainingTime' will be zero, meaning indefinite time (depending on administrative actions on the Black List). Otherwise, 'trpzBlacklistingRemainingTime' will indicate the time in seconds until this transmitter's requests could be allowed. | 1.3.6.1.4.1.14525.5.0.43 | current |
| trpzRFDetectClientViaRogueWiredAPTrap2 NOTIFICATION-TYPE This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. trpzSourceWsIp is the IP address of the AC (switch) with the wired port. trpzPortNum is the port on the AC. trpzClientVLANid is the VLAN ID of the client's traffic. trpzClientVLANtag is the VLAN tag of the client's traffic. trpzRFDetectXmtrMacAddr is the MAC address of the client. trpzRFDetectListenerListInfo is a display string of a list of listener information. trpzRFDetectRogueAPMacAddr is the MAC address of the Rogue AP (wired) the client is connected to. Obsoleted by trpzRFDetectClientViaRogueWiredAPTrap3. | 1.3.6.1.4.1.14525.5.0.44 | obsolete |
| trpzRFDetectAdhocUserDisappearTrap NOTIFICATION-TYPE This trap is sent when RF detection sweep finds that an ad-hoc user disappeared. trpzRFDetectXmtrMacAddr is the MAC address of the ad-hoc user. | 1.3.6.1.4.1.14525.5.0.45 | current |
| trpzApRejectLicenseExceededTrap NOTIFICATION-TYPE This trap is sent when an AC (wireless switch) receives a packet from an inactive AP and attaching that AP would make the AC exceed the maximum (licensed) number of active APs. | 1.3.6.1.4.1.14525.5.0.46 | current |
| trpzClientDynAuthorChangeSuccessTrap NOTIFICATION-TYPE This trap is sent when the authorization attributes for a user are dynamically changed by an authorized dynamic authorization client. Obsoleted by trpzClientDynAuthorChangeSuccessTrap2. | 1.3.6.1.4.1.14525.5.0.47 | obsolete |
| trpzClientDynAuthorChangeFailureTrap NOTIFICATION-TYPE This trap is sent if a change of authorization request sent by an authorized dynamic authorization client is unsuccessful. | 1.3.6.1.4.1.14525.5.0.48 | current |
| trpzClientDisconnectTrap NOTIFICATION-TYPE This trap is sent when a client session is terminated administratively. Obsoleted by trpzClientDisconnectTrap2. | 1.3.6.1.4.1.14525.5.0.49 | obsolete |
| trpzMobilityDomainFailOverTrap NOTIFICATION-TYPE This trap is sent when the Mobility Domain fails over to the secondary seed. | 1.3.6.1.4.1.14525.5.0.50 | current |
| trpzMobilityDomainFailBackTrap NOTIFICATION-TYPE This trap is sent when the Mobility Domain fails back to the primary seed. | 1.3.6.1.4.1.14525.5.0.51 | current |
| trpzRFDetectRogueDeviceTrap NOTIFICATION-TYPE This trap is sent when RF detection finds a rogue device. XmtrMacAddr is the radio MAC address from the beacon. ListenerListInfo is a display string of a list of listener information. ClassificationReason indicates the reason why the device is classified as rogue. Obsoleted by trpzRFDetectRogueDeviceTrap2. | 1.3.6.1.4.1.14525.5.0.52 | obsolete |
| trpzRFDetectRogueDeviceDisappearTrap NOTIFICATION-TYPE This trap is sent when a rogue device has disappeared. This trap obsoletes the trpzRFDetectRogueDisappearTrap. | 1.3.6.1.4.1.14525.5.0.53 | current |
| trpzRFDetectSuspectDeviceTrap NOTIFICATION-TYPE This trap is sent when RF detection finds a suspect device. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. ClassificationReason indicates the reason why the device is classified as suspect. Obsoleted by trpzRFDetectSuspectDeviceTrap2. | 1.3.6.1.4.1.14525.5.0.54 | obsolete |
| trpzRFDetectSuspectDeviceDisappearTrap NOTIFICATION-TYPE This trap is sent when a suspect device has disappeared. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. This trap obsoletes the trpzRFDetectInterferingRogueDisappearTrap. | 1.3.6.1.4.1.14525.5.0.55 | current |
| trpzRFDetectClientViaRogueWiredAPTrap3 NOTIFICATION-TYPE This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. trpzSourceWsIp is the IP address of the AC (switch) with the wired port. trpzPortNum is the port on the AC. trpzClientVLANid is the VLAN ID of the client's traffic. trpzClientVLANtag is the VLAN tag of the client's traffic. trpzRFDetectXmtrMacAddr is the MAC address of the client. trpzRFDetectListenerListInfo is a display string of a list of listener information. trpzRFDetectRogueAPMacAddr is the MAC address of the Rogue AP (wired) the client is connected to. ClassificationReason indicates the reason why the AP is classified as rogue. This trap obsoletes the trpzRFDetectClientViaRogueWiredAPTrap and trpzRFDetectClientViaRogueWiredAPTrap2. | 1.3.6.1.4.1.14525.5.0.56 | current |
| trpzRFDetectClassificationChangeTrap NOTIFICATION-TYPE This trap is sent when RF detection classification rules change. | 1.3.6.1.4.1.14525.5.0.57 | current |
| trpzConfigurationSavedTrap NOTIFICATION-TYPE This trap is sent when the running configuration of the switch is written to a configuration file. | 1.3.6.1.4.1.14525.5.0.58 | current |
| trpzApNonOperStatusTrap2 NOTIFICATION-TYPE This trap is sent when the AP changes state and the new one is a non-operational state. Obsoletes trpzApNonOperStatusTrap. | 1.3.6.1.4.1.14525.5.0.59 | current |
| trpzApOperRadioStatusTrap2 NOTIFICATION-TYPE This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availability. Obsoleted by trpzApOperRadioStatusTrap3. | 1.3.6.1.4.1.14525.5.0.60 | obsolete |
| trpzMichaelMICFailure NOTIFICATION-TYPE Two Michael MIC failures were seen within 60 seconds of each other. Object trpzClientMACAddress indicates the source of the first failure, and object trpzClientMACAddress2 indicates the source of the second failure. Service is interrupted for 60 seconds on the radio due to TKIP countermeasures having commenced. The radio is identified by trpzApNum and trpzAPRadioNum. An alternative way to identify the radio is trpzRadioMACAddress. Obsoletes trpzMpMichaelMICFailure and trpzMpMichaelMICFailure2. | 1.3.6.1.4.1.14525.5.0.61 | current |
| trpzClientAuthorizationSuccessTrap3 NOTIFICATION-TYPE This trap is sent when a client authorizes. If trpzClientAccessMode = 'ap': trpzApNum, trpzAPRadioNum, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent. If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoleted by trpzClientAuthorizationSuccessTrap5. | 1.3.6.1.4.1.14525.5.0.62 | obsolete |
| trpzApManagerChangeTrap NOTIFICATION-TYPE This trap is sent when the AP's secondary link becomes its primary link. | 1.3.6.1.4.1.14525.5.0.63 | current |
| trpzClientClearedTrap2 NOTIFICATION-TYPE This trap is sent when a client session is cleared. Obsoleted by trpzClientClearedTrap3. | 1.3.6.1.4.1.14525.5.0.64 | obsolete |
| trpzMobilityDomainResiliencyStatusTrap NOTIFICATION-TYPE This trap is sent by a mobility domain seed to announce changes in resilient capacity status. | 1.3.6.1.4.1.14525.5.0.65 | current |
| trpzApOperRadioStatusTrap3 NOTIFICATION-TYPE This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availability. Obsoletes trpzApOperRadioStatusTrap and trpzApOperRadioStatusTrap2. | 1.3.6.1.4.1.14525.5.0.66 | current |
| trpzClientAuthorizationSuccessTrap4 NOTIFICATION-TYPE This trap is sent when a client authorizes. If trpzClientAccessMode = 'ap': trpzApNum, trpzAPRadioNum, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; trpzClientRadioType gives the type of radio used by this client. If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoleted by trpzClientAuthorizationSuccessTrap5. | 1.3.6.1.4.1.14525.5.0.67 | obsolete |
| trpzRFDetectRogueDeviceTrap2 NOTIFICATION-TYPE This trap is sent when RF detection finds a rogue device. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectXmtrRadioType indicates the Type of Radio used by the transmitter (rogue device). trpzRFDetectXmtrCryptoType indicates the Type of Crypto used by the transmitter (rogue device). trpzRFDetectListenerListInfo is a display string of a list of listener information. trpzRFDetectClassificationReason indicates the reason why the device is classified as rogue. Obsoletes trpzRFDetectRogueAPTrap, trpzRFDetectUnAuthorizedAPTrap, trpzRFDetectRogueDeviceTrap. | 1.3.6.1.4.1.14525.5.0.68 | current |
| trpzRFDetectSuspectDeviceTrap2 NOTIFICATION-TYPE This trap is sent when RF detection finds a suspect device. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectXmtrRadioType indicates the Type of Radio used by the transmitter (suspect device). trpzRFDetectXmtrCryptoType indicates the Type of Crypto used by the transmitter (suspect device). trpzRFDetectListenerListInfo is a display string of a list of listener information. trpzRFDetectClassificationReason indicates the reason why the device is classified as suspect. Obsoletes trpzRFDetectInterferingRogueAPTrap, trpzRFDetectSuspectDeviceTrap. | 1.3.6.1.4.1.14525.5.0.69 | current |
| trpzClusterFailureTrap NOTIFICATION-TYPE This trap is sent when the cluster configuration failed to apply. If trpzClusterFailureReason = 'validation-error': The validation error is reported by the receiving end of the configuration updates. The receiving end can be any AC (switch) in the mobility domain: member, secondary seed or primary seed. - Primary seed will be the receiving end of configuration updates when Primary seed is joining the cluster and Secondary seed has preempt mode enabled. - Both Secondary seed and member will be at the receiving end when Primary seed is active. | 1.3.6.1.4.1.14525.5.0.70 | current |
| trpzMultimediaCallFailureTrap NOTIFICATION-TYPE This trap is sent when a multimedia call fails. | 1.3.6.1.4.1.14525.5.0.71 | current |
| trpzApTunnelLimitExceededTrap NOTIFICATION-TYPE This trap is sent by the AP primary controller (PAM) when an AP rejects a tunnel creation request because it has already created the maximum number of tunnels it can support. | 1.3.6.1.4.1.14525.5.0.72 | current |
| trpzWsTunnelLimitExceededTrap NOTIFICATION-TYPE This trap is sent when the AC (wireless switch) rejects a tunnel creation request because it has reached the maximum number of tunnels supported (indicated by 'trpzWsTunnelLimit'). When trpzWsTunnelLimitType = 'platform-tunnel-limit' (2) the AC has reached the maximum tunnel capacity, which depends on the platform. When trpzWsTunnelLimitType = 'ap-ws-tunnel-limit' (3) the AC has reached the AP-to-switch tunnels limit, which depends on the current situation of the AC (mobility domain, network domain, network resiliency status). | 1.3.6.1.4.1.14525.5.0.73 | current |
| trpzRFNoiseSourceTrap NOTIFICATION-TYPE This trap is sent upon the appearance of a new noise source. 'trpzRadioMACAddress' indicates the listener (the AP radio reporting the noise). A given combination of noise source ID, listener and channel should trigger this trap at most once every 15 minutes. | 1.3.6.1.4.1.14525.5.0.74 | current |
| trpzM2UConvNotPossibleTrap NOTIFICATION-TYPE This trap is sent when multicast to unicast conversion is enabled on the AP, but cannot be performed. | 1.3.6.1.4.1.14525.5.0.75 | current |
| trpzM2UConvAvailabilityRestoredTrap NOTIFICATION-TYPE This trap is sent when the multicast to unicast conversion can be resumed on the AP, after disruption. | 1.3.6.1.4.1.14525.5.0.76 | current |
| trpzAutoTuneSuccessTrap NOTIFICATION-TYPE This trap is sent when an auto-tune operation completed successfully. | 1.3.6.1.4.1.14525.5.0.77 | current |
| trpzAutoTuneFailureTrap NOTIFICATION-TYPE This trap is sent when an auto-tune operation failed to complete. | 1.3.6.1.4.1.14525.5.0.78 | current |
| trpzClientDeAssociationTrap2 NOTIFICATION-TYPE This trap is sent if a client de-association occurred. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client before deassociation; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientDeAssociationTrap. | 1.3.6.1.4.1.14525.5.0.79 | current |
| trpzClientRoamingTrap2 NOTIFICATION-TYPE This trap is sent if a client roams from one location to another. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client, after roam; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client, after roam. Obsoletes trpzClientRoamingTrap. | 1.3.6.1.4.1.14525.5.0.80 | current |
| trpzClientIpAddrChangeTrap2 NOTIFICATION-TYPE This trap is sent when an IP address of a client changes. The most likely cases for this are when the client first connects to the network and when a new IPv6 global address is assigned to the client. The pair of objects trpzClientIpAddrType/trpzClientIpAddr indicates the type and the value of the new IP address. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientIpAddrChangeTrap. | 1.3.6.1.4.1.14525.5.0.81 | current |
| trpzClientDeAuthenticationTrap2 NOTIFICATION-TYPE This trap is sent if a client de-authentication occurred. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientDeAuthenticationTrap. | 1.3.6.1.4.1.14525.5.0.82 | current |
| trpzClientDynAuthorChangeSuccessTrap2 NOTIFICATION-TYPE This trap is sent when the authorization attributes for a user are dynamically changed by an authorized dynamic authorization client. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientDynAuthorChangeSuccessTrap. | 1.3.6.1.4.1.14525.5.0.83 | current |
| trpzClientDisconnectTrap2 NOTIFICATION-TYPE This trap is sent when a client session is terminated administratively. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientDisconnectTrap. | 1.3.6.1.4.1.14525.5.0.84 | current |
| trpzClientClearedTrap3 NOTIFICATION-TYPE This trap is sent when a client session is cleared. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientClearedTrap, trpzClientClearedTrap2. | 1.3.6.1.4.1.14525.5.0.85 | current |
| trpzClientAuthorizationSuccessTrap5 NOTIFICATION-TYPE This trap is sent when a client authorizes. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; trpzClientRadioType gives the type of radio used by this client. If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientAuthorizationSuccessTrap, trpzClientAuthorizationSuccessTrap2, trpzClientAuthorizationSuccessTrap3, trpzClientAuthorizationSuccessTrap4. | 1.3.6.1.4.1.14525.5.0.86 | current |
| trpzClientDeviceTypeChangeTrap NOTIFICATION-TYPE This trap is sent when the detected device type of a client changes. The new device type is indicated by trpzClientDeviceType. trpzClientDeviceGroup indicates the group that the new device type belongs to. As of release 8.0, device detection is done only for wireless clients (trpzClientAccessMode = 'ap'). | 1.3.6.1.4.1.14525.5.0.87 | current |
| trpzClientDeviceProfileChangeTrap NOTIFICATION-TYPE This trap is sent when the device profile for a client device changes. The new device profile is indicated by trpzClientDeviceProfileName. trpzClientDeviceProfileChangeReason indicates the reason why the device profile changed. As of release 8.0, device detection is done only for wireless clients (trpzClientAccessMode = 'ap'). | 1.3.6.1.4.1.14525.5.0.88 | current |