TRAPEZE-NETWORKS-AP-CONFIG-MIB
- Registered at
- 1.3.6.1.4.1.14525.4.14
- Last updated
- 2013-06-21 03:24
- Organization
- Trapeze Networks
- Revisions
- 2013-06-21 03:24, 2012-12-21 03:23, 2012-10-16 03:22, 2012-08-06 03:13, 2012-08-05 03:02, 2012-03-08 03:01, 2011-02-03 02:00, 2010-03-05 01:21, 2009-11-19 01:08
- Namespace
- juniper
- Source file
TRAPEZE-NETWORKS-AP-CONFIG-MIB- Digest
sha256:abd33110934b1f194b0c9ab7a3781bc683f42509c8036526dda7f17b4e72b009
Description
AP Configuration objects for Trapeze Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2009-2013 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Contact
Trapeze Networks Technical Support www.trapezenetworks.com US: 866.TRPZ.TAC International: 925.474.2400 support@trapezenetworks.com
Imports
| From | Symbols |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| TRAPEZE-NETWORKS-AP-TC | TrpzApAttachType, TrpzApBias, TrpzApFingerprint, TrpzApLedMode, TrpzApNum, TrpzApPowerMode, TrpzApRadioIndex, TrpzApSerialNum, TrpzChannelNum, TrpzPowerLevel, TrpzRadioAntennaLocation, TrpzRadioChannelWidth, TrpzRadioMode, TrpzRadioType |
| TRAPEZE-NETWORKS-BASIC-TC | TrpzPhysPortNumberOrZero |
| TRAPEZE-NETWORKS-EXTERNAL-SERVER-TC | TrpzSyslogSeverity |
| TRAPEZE-NETWORKS-ROOT-MIB | trpzMibs |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
INET-ADDRESS-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC TRAPEZE-NETWORKS-AP-CONFIG-MIB TRAPEZE-NETWORKS-AP-TC TRAPEZE-NETWORKS-BASIC-TC TRAPEZE-NETWORKS-EXTERNAL-SERVER-TC TRAPEZE-NETWORKS-ROOT-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| TrpzApLldpMode TEXTUAL-CONVENTION Enumeration of LLDP modes for an AP. | current | |||
| TrpzApRadiusNasIdType TEXTUAL-CONVENTION Enumeration of NAS-ID values for the RADIUS server group of a remote site. | current | |||
| TrpzApTemplateName TEXTUAL-CONVENTION AP Template Name, consists of printable ASCII characters between 0x21 (!), and 0x7d (}) with no leading, embedded, or trailing space. Cannot be a zero length string. | current | |||
| TrpzBackupSsidMode TEXTUAL-CONVENTION Enumeration of remote-site backup SSID modes. | current | |||
| TrpzRadioProfileAutoTuneChannelRange TEXTUAL-CONVENTION Enumeration of Auto-Tune channel ranges for a radio profile. Obsoleted: not supported anymore. | obsolete | |||
| TrpzRadioProfileCountermeasuresMode TEXTUAL-CONVENTION Enumeration of the Countermeasure modes for a radio profile. | current | |||
| TrpzRadioProfileName TEXTUAL-CONVENTION Radio Profile Name, consists of printable ASCII characters between 0x21 (!), and 0x7e (~) with no leading, embedded, or trailing space. Cannot be a zero length string. Deprecated by TrpzRadioProfileName32, which allows Radio Profile Names up to 32 characters long. Radio Profile Names longer than 16 characters will be truncated, last four characters will be replaced by tilde (~) and three digits. Example: '12345678901234567890' will appear as '123456789012~001' '12345678901234569999' will appear as '123456789012~002' etc. In case of a name collision, for example if '123456789012~002' is the full name of another Radio Profile, the next available three-digit suffix will be used: '12345678901234569999' will appear as '123456789012~003' instead. | deprecated | |||
| TrpzRadioProfileName32 TEXTUAL-CONVENTION Radio Profile Name, consists of printable ASCII characters between 0x21 (!), and 0x7e (~) with no leading, embedded, or trailing space. Cannot be a zero length string. Deprecates TrpzRadioProfileName. | current | |||
| TrpzRadioProfileRFScanChannelScope TEXTUAL-CONVENTION Enumeration of RF scanning channel scopes for a radio profile. | current | |||
| TrpzRadioProfileRFScanMode TEXTUAL-CONVENTION Enumeration of RF scanning modes for a radio profile. | current | |||
| TrpzRadioProfileRFSpectralScanPriority TEXTUAL-CONVENTION Enumeration of Spectral Scan Priorities for a radio profile. | current | |||
| TrpzServiceProfile11nFrameAggregationType TEXTUAL-CONVENTION Enumeration of 802.11n frame aggregation types for a service profile. | current | |||
| TrpzServiceProfile11nMode TEXTUAL-CONVENTION Enumeration of 802.11n modes for a service profile. | current | |||
| TrpzServiceProfile11nMpduMaxLength TEXTUAL-CONVENTION Enumeration of 802.11n A-MPDU maximum lengths for a service profile. | current | |||
| TrpzServiceProfile11nMsduMaxLength TEXTUAL-CONVENTION Enumeration of 802.11n A-MSDU maximum lengths for a service profile. | current | |||
| TrpzServiceProfileAuthFallthruType TEXTUAL-CONVENTION Enumeration of Authentication Fallthrough types for a service profile. | current | |||
| TrpzServiceProfileCacMode TEXTUAL-CONVENTION Enumeration of Call Admission Control types for a service profile. | current | |||
| TrpzServiceProfileName TEXTUAL-CONVENTION Service Profile Name, consists of printable ASCII characters between 0x21 (!), and 0x7d (}) with no leading, embedded, or trailing space. Cannot be a zero length string. | current | |||
| TrpzServiceProfileSsidType TEXTUAL-CONVENTION Enumeration of Service Types provided on a service profile. | current | |||
| TrpzSnoopFilterName TEXTUAL-CONVENTION Snoop Filter Name, consists of printable ASCII characters between 0x21 (!), and 0x7d (}) with no leading, embedded, or trailing space. Cannot be a zero length string. | current | |||
| TrpzSnoopObserverTxMode TEXTUAL-CONVENTION Enumeration of transmission modes for snoop packets. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| trpzApConfigMibObjects OBJECT-IDENTITY | 1.3.6.1.4.1.14525.4.14.1 | |||
| trpzApConfApConfigTable OBJECT-TYPE A table describing all the APs currently configured on this AC. | 1.3.6.1.4.1.14525.4.14.1.2 | not-accessible | current | |
| trpzApConfApConfigEntry OBJECT-TYPE Configuration for a particular AP that could be attached to the AC. | 1.3.6.1.4.1.14525.4.14.1.2.1 | not-accessible | current | |
| trpzApConfApConfigApNum OBJECT-TYPE The Number of this AP (administratively assigned). | 1.3.6.1.4.1.14525.4.14.1.2.1.1 | TrpzApNum | not-accessible | current |
| trpzApConfApConfigApAttachType OBJECT-TYPE How this AP is attached to the AC (directly or via L2/L3 network). | 1.3.6.1.4.1.14525.4.14.1.2.1.2 | TrpzApAttachType | read-only | current |
| trpzApConfApConfigPhysPortNum OBJECT-TYPE Identifies the physical port used to attach this AP. Only valid for directly attached APs, otherwise will be zero. | 1.3.6.1.4.1.14525.4.14.1.2.1.3 | TrpzPhysPortNumberOrZero | read-only | current |
| trpzApConfApConfigApSerialNum OBJECT-TYPE The Serial Number used to identify this AP. Only valid for network attached APs, otherwise will be a zero length string. | 1.3.6.1.4.1.14525.4.14.1.2.1.4 | TrpzApSerialNum | read-only | current |
| trpzApConfApConfigApModelName OBJECT-TYPE The Model name of this AP. | 1.3.6.1.4.1.14525.4.14.1.2.1.5 | DisplayString (SIZE(0..24)) | read-only | current |
| trpzApConfApConfigFingerprint OBJECT-TYPE The RSA key fingerprint configured on this AP (binary value: it is the MD5 hash of the public key of the RSA key pair). For directly attached APs the fingerprint is a zero length string. | 1.3.6.1.4.1.14525.4.14.1.2.1.6 | TrpzApFingerprint | read-only | current |
| trpzApConfApConfigBias OBJECT-TYPE Bias (high/low/sticky). | 1.3.6.1.4.1.14525.4.14.1.2.1.7 | TrpzApBias | read-only | current |
| trpzApConfApConfigApTimeout OBJECT-TYPE The communication timeout for this AP, in seconds. | 1.3.6.1.4.1.14525.4.14.1.2.1.8 | Unsigned32 | read-only | current |
| trpzApConfApConfigApName OBJECT-TYPE The configured Name for this AP. Names longer than 16 characters will be truncated (example: 'APNamelongerthan16chars' will be shown as 'APNamelongertha~'). Deprecated by trpzApConfApConfigApName2, which allows AP Names longer than 16 characters. | 1.3.6.1.4.1.14525.4.14.1.2.1.9 | DisplayString (SIZE(0..16)) | read-only | deprecated |
| trpzApConfApConfigContact OBJECT-TYPE The Contact information for this AP. | 1.3.6.1.4.1.14525.4.14.1.2.1.10 | DisplayString (SIZE(0..255)) | read-only | current |
| trpzApConfApConfigLocation OBJECT-TYPE The Location information for this AP. | 1.3.6.1.4.1.14525.4.14.1.2.1.11 | DisplayString (SIZE(0..255)) | read-only | current |
| trpzApConfApConfigBlinkEnabled OBJECT-TYPE Indicates whether the LED blink mode is enabled on this AP. | 1.3.6.1.4.1.14525.4.14.1.2.1.12 | TruthValue | read-only | current |
| trpzApConfApConfigForceImageDownloadEnabled OBJECT-TYPE Indicates whether this AP is forced to always download an image from the AC upon boot. | 1.3.6.1.4.1.14525.4.14.1.2.1.13 | TruthValue | read-only | current |
| trpzApConfApConfigFirmwareUpgradeEnabled OBJECT-TYPE Indicates whether automatic boot firmware upgrade is enabled on this AP. | 1.3.6.1.4.1.14525.4.14.1.2.1.14 | TruthValue | read-only | current |
| trpzApConfApConfigLocalSwitchingEnabled OBJECT-TYPE Indicates whether local switching is enabled on this AP. | 1.3.6.1.4.1.14525.4.14.1.2.1.15 | TruthValue | read-only | current |
| trpzApConfApConfigPowerMode OBJECT-TYPE The mode in which this AP is supplying power to its radios. | 1.3.6.1.4.1.14525.4.14.1.2.1.16 | TrpzApPowerMode | read-only | current |
| trpzApConfApConfigLedMode OBJECT-TYPE LED Mode (auto/static/off). | 1.3.6.1.4.1.14525.4.14.1.2.1.17 | TrpzApLedMode | read-only | current |
| trpzApConfApConfigDescription OBJECT-TYPE The configured Description for this AP. | 1.3.6.1.4.1.14525.4.14.1.2.1.18 | DisplayString (SIZE(0..256)) | read-only | current |
| trpzApConfApConfigLldpMode OBJECT-TYPE LLDP Mode (tx/disabled). | 1.3.6.1.4.1.14525.4.14.1.2.1.19 | TrpzApLldpMode | read-only | current |
| trpzApConfApConfigLldpMedEnabled OBJECT-TYPE Indicates whether LLDP-MED is enabled for this AP. | 1.3.6.1.4.1.14525.4.14.1.2.1.20 | TruthValue | read-only | current |
| trpzApConfApConfigLldpMedExtPowerViaMdiTlvSelected OBJECT-TYPE Indicates whether LLDP-MED Extended Power via MDI TLV is selected for this AP. | 1.3.6.1.4.1.14525.4.14.1.2.1.21 | TruthValue | read-only | current |
| trpzApConfApConfigLldpMedInventoryTlvSelected OBJECT-TYPE Indicates whether LLDP-MED Inventory TLV is selected for this AP. | 1.3.6.1.4.1.14525.4.14.1.2.1.22 | TruthValue | read-only | current |
| trpzApConfApConfigApTunnelEnabled OBJECT-TYPE Indicates whether AP to AP tunnels are enabled for this AP. | 1.3.6.1.4.1.14525.4.14.1.2.1.23 | TruthValue | read-only | current |
| trpzApConfApConfigDataSecurityEnabled OBJECT-TYPE Indicates whether Data Security is enabled for this AP. | 1.3.6.1.4.1.14525.4.14.1.2.1.24 | TruthValue | read-only | current |
| trpzApConfApConfigWanOutageModeEnabled OBJECT-TYPE Indicates whether WAN Outage (remote) Mode is enabled for this AP. | 1.3.6.1.4.1.14525.4.14.1.2.1.25 | TruthValue | read-only | current |
| trpzApConfApConfigWanOutageExtendedTimeout OBJECT-TYPE The duration for which the AP can stay in WAN outage mode, in hours. A value of zero means the AP can stay in outage mode indefinitely. | 1.3.6.1.4.1.14525.4.14.1.2.1.26 | Unsigned32 | read-only | current |
| trpzApConfApConfigWanOutageEvaluationPeriod OBJECT-TYPE The AC connection Evaluation Period for APs in WAN Outage mode, in seconds. | 1.3.6.1.4.1.14525.4.14.1.2.1.27 | Unsigned32 | read-only | current |
| trpzApConfApConfigRemoteSiteName OBJECT-TYPE The name of the remote site that the AP is part of. An empty string means that the AP is not part of any remote site. | 1.3.6.1.4.1.14525.4.14.1.2.1.28 | DisplayString (SIZE(0..32)) | read-only | current |
| trpzApConfApConfigPathMtu OBJECT-TYPE The configured Maximum Transmission Unit (in bytes) for communication between AP and AC. The value 0 means that the MTU was not administratively configured. | 1.3.6.1.4.1.14525.4.14.1.2.1.29 | Unsigned32 | read-only | current |
| trpzApConfApConfigHighLatencyModeEnabled OBJECT-TYPE Indicates whether the high-latency mode is enabled for the AP. | 1.3.6.1.4.1.14525.4.14.1.2.1.30 | TruthValue | read-only | current |
| trpzApConfApConfigApName2 OBJECT-TYPE The configured Name for this AP; defaults to AP<Number> (examples: 'AP01', 'AP22', 'AP333', 'AP4444'); could have been changed from CLI to a meaningful name, for example the location of the AP (example: 'MeetingRoom73'). Deprecates trpzApConfApConfigApName. | 1.3.6.1.4.1.14525.4.14.1.2.1.31 | DisplayString | read-only | current |
| trpzApConfApConfigCacheConfigEnabled OBJECT-TYPE Indicates whether the configuration of the AP is saved on the AP itself, so that it won't be lost after reboot. To enable this setting, the AP must have outage mode enabled. | 1.3.6.1.4.1.14525.4.14.1.2.1.32 | TruthValue | read-only | current |
| trpzApConfRadioConfigTable OBJECT-TYPE A table describing the radios on all the APs currently configured on this AC. | 1.3.6.1.4.1.14525.4.14.1.3 | not-accessible | current | |
| trpzApConfRadioConfigEntry OBJECT-TYPE Configuration for a particular Radio on a particular AP that could be attached to the AC. | 1.3.6.1.4.1.14525.4.14.1.3.1 | not-accessible | current | |
| trpzApConfRadioConfigApNum OBJECT-TYPE The Number of the AP (administratively assigned). | 1.3.6.1.4.1.14525.4.14.1.3.1.1 | TrpzApNum | not-accessible | current |
| trpzApConfRadioConfigRadioIndex OBJECT-TYPE The number of this Radio on the AP. | 1.3.6.1.4.1.14525.4.14.1.3.1.2 | TrpzApRadioIndex | not-accessible | current |
| trpzApConfRadioConfigRadioType OBJECT-TYPE The configured Type of this radio (typeA, typeB, typeG, typeNA, typeNG) | 1.3.6.1.4.1.14525.4.14.1.3.1.3 | TrpzRadioType | read-only | current |
| trpzApConfRadioConfigRadioMode OBJECT-TYPE The configured Mode of this radio (enabled/disabled/sentry) | 1.3.6.1.4.1.14525.4.14.1.3.1.4 | TrpzRadioMode | read-only | current |
| trpzApConfRadioConfigRadioProfileName OBJECT-TYPE Identifies the Radio Profile to be applied this radio, by short name, as it appears in the legacy Radio Profile table (trpzApConfRadioProfileTable). Deprecated by trpzApConfRadioConfigRadioProfileName2, which allows Radio Profile Names longer than 16 characters. | 1.3.6.1.4.1.14525.4.14.1.3.1.5 | TrpzRadioProfileName | read-only | deprecated |
| trpzApConfRadioConfigChannel OBJECT-TYPE The configured Channel Number of this radio. | 1.3.6.1.4.1.14525.4.14.1.3.1.6 | TrpzChannelNum | read-only | current |
| trpzApConfRadioConfigTxPower OBJECT-TYPE The configured Tx Power level of this radio. | 1.3.6.1.4.1.14525.4.14.1.3.1.7 | TrpzPowerLevel | read-only | current |
| trpzApConfRadioConfigAutoTuneMaxTxPower OBJECT-TYPE The Maximum Tx Power that Auto Tune is allowed to set for this radio. Obsoleted: not supported anymore. | 1.3.6.1.4.1.14525.4.14.1.3.1.8 | TrpzPowerLevel | read-only | obsolete |
| trpzApConfRadioConfigAntennaType OBJECT-TYPE The configured Antenna Type for this radio. | 1.3.6.1.4.1.14525.4.14.1.3.1.9 | DisplayString (SIZE(0..16)) | read-only | current |
| trpzApConfRadioConfigAntennaLocation OBJECT-TYPE The configured Antenna Location for this radio. | 1.3.6.1.4.1.14525.4.14.1.3.1.10 | TrpzRadioAntennaLocation | read-only | current |
| trpzApConfRadioConfigLoadBalancingEnabled OBJECT-TYPE Indicates whether RF Load Balancing is enabled on this radio. | 1.3.6.1.4.1.14525.4.14.1.3.1.11 | TruthValue | read-only | current |
| trpzApConfRadioConfigLoadBalancingGroup OBJECT-TYPE Indicates the RF Load Balancing group that this radio is assigned to. | 1.3.6.1.4.1.14525.4.14.1.3.1.12 | DisplayString (SIZE(0..32)) | read-only | current |
| trpzApConfRadioConfigLoadRebalancingEnabled OBJECT-TYPE Indicates whether RF Load Rebalancing is enabled for this radio. | 1.3.6.1.4.1.14525.4.14.1.3.1.13 | TruthValue | read-only | current |
| trpzApConfRadioConfigRadioProfileName2 OBJECT-TYPE Identifies the Radio Profile to be applied to this radio. Deprecates trpzApConfRadioConfigRadioProfileName. | 1.3.6.1.4.1.14525.4.14.1.3.1.14 | DisplayString | read-only | current |
| trpzApConfApTemplateConfigTable OBJECT-TYPE A table describing all the AP Templates currently configured on this AC. | 1.3.6.1.4.1.14525.4.14.1.4 | not-accessible | current | |
| trpzApConfApTemplateConfigEntry OBJECT-TYPE Template configuration for APs that could be attached to the AC. | 1.3.6.1.4.1.14525.4.14.1.4.1 | not-accessible | current | |
| trpzApConfApTemplConfApTemplateName OBJECT-TYPE AP Template Name. | 1.3.6.1.4.1.14525.4.14.1.4.1.1 | TrpzApTemplateName | not-accessible | current |
| trpzApConfApTemplConfApTemplateEnabled OBJECT-TYPE Indicates whether this AP Template is Enabled (can be used for bringing up APs). | 1.3.6.1.4.1.14525.4.14.1.4.1.2 | TruthValue | read-only | current |
| trpzApConfApTemplConfBias OBJECT-TYPE Bias (high/low/sticky). | 1.3.6.1.4.1.14525.4.14.1.4.1.3 | TrpzApBias | read-only | current |
| trpzApConfApTemplConfApTimeout OBJECT-TYPE The communication timeout for this AP Template, in seconds. | 1.3.6.1.4.1.14525.4.14.1.4.1.4 | Unsigned32 | read-only | current |
| trpzApConfApTemplConfBlinkEnabled OBJECT-TYPE Indicates whether the LED blink mode is enabled on this AP Template. | 1.3.6.1.4.1.14525.4.14.1.4.1.5 | TruthValue | read-only | current |
| trpzApConfApTemplConfForceImageDownloadEnabled OBJECT-TYPE Indicates whether this AP is forced to always download an image from the AC upon boot. | 1.3.6.1.4.1.14525.4.14.1.4.1.6 | TruthValue | read-only | current |
| trpzApConfApTemplConfFirmwareUpgradeEnabled OBJECT-TYPE Indicates whether automatic boot firmware upgrade is enabled on this AP Template. | 1.3.6.1.4.1.14525.4.14.1.4.1.7 | TruthValue | read-only | current |
| trpzApConfApTemplConfLocalSwitchingEnabled OBJECT-TYPE Indicates whether local switching is enabled on this AP Template. | 1.3.6.1.4.1.14525.4.14.1.4.1.8 | TruthValue | read-only | current |
| trpzApConfApTemplConfPowerMode OBJECT-TYPE The mode in which an AP using this Template will be supplying power to its radios. | 1.3.6.1.4.1.14525.4.14.1.4.1.9 | TrpzApPowerMode | read-only | current |
| trpzApConfApTemplConfLedMode OBJECT-TYPE The LED Mode (auto/static/off) for an AP using this Template. | 1.3.6.1.4.1.14525.4.14.1.4.1.10 | TrpzApLedMode | read-only | current |
| trpzApConfApTemplateRadioConfigTable OBJECT-TYPE A table describing the radios for all the AP Templates currently configured on this AC. | 1.3.6.1.4.1.14525.4.14.1.5 | not-accessible | current | |
| trpzApConfApTemplateRadioConfigEntry OBJECT-TYPE Template configuration for a particular Radio index on an AP Template configured on this AC. | 1.3.6.1.4.1.14525.4.14.1.5.1 | not-accessible | current | |
| trpzApConfApTemRadioConfApTemplateName OBJECT-TYPE AP Template Name. | 1.3.6.1.4.1.14525.4.14.1.5.1.1 | TrpzApTemplateName | not-accessible | current |
| trpzApConfApTemRadioConfRadioIndex OBJECT-TYPE The number of this Radio on the AP Template. | 1.3.6.1.4.1.14525.4.14.1.5.1.2 | TrpzApRadioIndex | not-accessible | current |
| trpzApConfApTemRadioConfRadioMode OBJECT-TYPE The configured mode of a radio using this Template (enabled/disabled/sentry) | 1.3.6.1.4.1.14525.4.14.1.5.1.3 | TrpzRadioMode | read-only | current |
| trpzApConfApTemRadioConfRadioProfileName OBJECT-TYPE Identifies the Radio Profile to be applied to a radio using this Template, by short name, as it appears in the legacy Radio Profile table (trpzApConfRadioProfileTable). Deprecated by trpzApConfApTemRadioConfRadioProfileName2, which allows Radio Profile Names longer than 16 characters. | 1.3.6.1.4.1.14525.4.14.1.5.1.4 | TrpzRadioProfileName | read-only | deprecated |
| trpzApConfApTemRadioConfAutoTuneMaxTxPower OBJECT-TYPE The Maximum Tx Power that Auto Tune will be allowed to set for a radio using this Template. Obsoleted: not supported anymore. | 1.3.6.1.4.1.14525.4.14.1.5.1.5 | TrpzPowerLevel | read-only | obsolete |
| trpzApConfApTemRadioConfLoadBalancingEnabled OBJECT-TYPE Indicates whether RF Load Balancing will be enabled on a radio using this Template. | 1.3.6.1.4.1.14525.4.14.1.5.1.6 | TruthValue | read-only | current |
| trpzApConfApTemRadioConfLoadBalancingGroup OBJECT-TYPE Indicates the RF Load Balancing group that a radio using this Template will be assigned to. | 1.3.6.1.4.1.14525.4.14.1.5.1.7 | DisplayString (SIZE(0..32)) | read-only | current |
| trpzApConfApTemRadioConfLoadRebalancingEnabled OBJECT-TYPE Indicates whether RF Load Rebalancing will be enabled for a radio using this Template. | 1.3.6.1.4.1.14525.4.14.1.5.1.8 | TruthValue | read-only | current |
| trpzApConfApTemRadioConfRadioProfileName2 OBJECT-TYPE Identifies the Radio Profile to be applied to a radio using this Template. Deprecates trpzApConfApTemRadioConfRadioProfileName. | 1.3.6.1.4.1.14525.4.14.1.5.1.9 | DisplayString | read-only | current |
| trpzApConfRadioProfileTable OBJECT-TYPE A table describing the Radio Profiles currently configured on this AC. Deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6 | not-accessible | deprecated | |
| trpzApConfRadioProfileEntry OBJECT-TYPE Configuration for a particular Radio Profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1 | not-accessible | deprecated | |
| trpzApConfRadioProfRadioProfileName OBJECT-TYPE Name of this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.1 | TrpzRadioProfileName | not-accessible | deprecated |
| trpzApConfRadioProfBeaconInterval OBJECT-TYPE Beacon Interval, time in thousandths of a second, for this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.2 | Unsigned32 | read-write | deprecated |
| trpzApConfRadioProfDtimInterval OBJECT-TYPE The number of times after every beacon that each AP radio in a radio profile sends a delivery traffic indication map (DTIM), for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.3 | Unsigned32 | read-only | deprecated |
| trpzApConfRadioProfChannelWidth11na OBJECT-TYPE 802.11n Channel Width for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.4 | TrpzRadioChannelWidth | read-only | deprecated |
| trpzApConfRadioProfMaxTxLifetime OBJECT-TYPE The maximum transmit threshold for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.5 | Unsigned32 | read-only | deprecated |
| trpzApConfRadioProfMaxRxLifetime OBJECT-TYPE The maximum receive threshold for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.6 | Unsigned32 | read-only | deprecated |
| trpzApConfRadioProfRtsThreshold OBJECT-TYPE The RTS threshold for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.7 | Unsigned32 | read-write | deprecated |
| trpzApConfRadioProfFragThreshold OBJECT-TYPE The fragmentation threshold for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.8 | Unsigned32 | read-write | deprecated |
| trpzApConfRadioProfLongXmitPreambleEnabled OBJECT-TYPE Indicates whether an 802.11b/g AP radio using this radio profile transmits Long Preamble. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.9 | TruthValue | read-only | deprecated |
| trpzApConfRadioProfCountermeasuresMode OBJECT-TYPE Countermeasures Mode for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.10 | TrpzRadioProfileCountermeasuresMode | read-only | deprecated |
| trpzApConfRadioProfRFScanMode OBJECT-TYPE RF Scanning Mode for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.11 | TrpzRadioProfileRFScanMode | read-only | deprecated |
| trpzApConfRadioProfRFScanChannelScope OBJECT-TYPE RF scanning Channel Scope for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.12 | TrpzRadioProfileRFScanChannelScope | read-only | deprecated |
| trpzApConfRadioProfRFScanCTSEnabled OBJECT-TYPE Indicates whether the AP radios using this radio profile send CTS To Self packet before going off channel. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.13 | TruthValue | read-only | deprecated |
| trpzApConfRadioProfAutoTune11aChannelRange OBJECT-TYPE The allowable 802.11a Channel Range used by Auto-Tune for the AP radios using this radio profile. Obsoleted: not supported anymore. | 1.3.6.1.4.1.14525.4.14.1.6.1.14 | TrpzRadioProfileAutoTuneChannelRange | read-only | obsolete |
| trpzApConfRadioProfAutoTuneIgnoreClientsEnabled OBJECT-TYPE Indicates whether the AP radios using this radio profile Ignore Client connections in Auto-Tune channel selections. Obsoleted: not supported anymore. | 1.3.6.1.4.1.14525.4.14.1.6.1.15 | TruthValue | read-only | obsolete |
| trpzApConfRadioProfAutoTuneChannelEnabled OBJECT-TYPE Indicates whether Channel Auto-Tuning is enabled for the AP radios using this radio profile. Obsoleted: not supported anymore. | 1.3.6.1.4.1.14525.4.14.1.6.1.16 | TruthValue | read-only | obsolete |
| trpzApConfRadioProfAutoTuneChannelHolddownInterval OBJECT-TYPE Minimum Interval (in seconds) between Channel changes due to Auto-Tuning, for the AP radios using this radio profile. Obsoleted: not supported anymore. | 1.3.6.1.4.1.14525.4.14.1.6.1.17 | Unsigned32 | read-only | obsolete |
| trpzApConfRadioProfAutoTuneChannelChangeInterval OBJECT-TYPE The interval (in seconds) at which RF Auto-Tuning decides whether to Change the Channel for the AP radios using this radio profile. Obsoleted: not supported anymore. | 1.3.6.1.4.1.14525.4.14.1.6.1.18 | Unsigned32 | read-only | obsolete |
| trpzApConfRadioProfAutoTunePowerEnabled OBJECT-TYPE Indicates whether Power Auto-Tuning is enabled for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.19 | TruthValue | read-only | deprecated |
| trpzApConfRadioProfAutoTunePowerRampInterval OBJECT-TYPE Minimum Interval (in seconds) between Power changes due to Auto-Tuning, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.20 | Unsigned32 | read-only | deprecated |
| trpzApConfRadioProfAutoTunePowerChangeInterval OBJECT-TYPE The interval (in seconds) at which RF Auto-Tuning decides whether to Change the Power for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.21 | Unsigned32 | read-only | deprecated |
| trpzApConfRadioProfFairQueuingEnabled OBJECT-TYPE Indicates whether weighted Fair Queuing is enabled for this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.22 | TruthValue | read-only | deprecated |
| trpzApConfRadioProfCacBackgroundACMandatory OBJECT-TYPE Indicates whether Admission Control for Background traffic is Mandatory for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.23 | TruthValue | read-only | deprecated |
| trpzApConfRadioProfCacBackgroundMaxUtilization OBJECT-TYPE Maximum admission control limit for Background traffic, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.24 | Unsigned32 | read-only | deprecated |
| trpzApConfRadioProfCacBackgroundPolicingEnabled OBJECT-TYPE Indicates that admission control Policing for Background traffic is enabled, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.25 | TruthValue | read-only | deprecated |
| trpzApConfRadioProfCacBestEffortACMandatory OBJECT-TYPE Indicates that Admission Control for Best Effort traffic is Mandatory for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.26 | TruthValue | read-only | deprecated |
| trpzApConfRadioProfCacBestEffortMaxUtilization OBJECT-TYPE Maximum admission control limit for Best Effort traffic, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.27 | Unsigned32 | read-only | deprecated |
| trpzApConfRadioProfCacBestEffortPolicingEnabled OBJECT-TYPE Indicates that admission control Policing for Best Effort traffic is enabled, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.28 | TruthValue | read-only | deprecated |
| trpzApConfRadioProfCacVideoACMandatory OBJECT-TYPE Indicates that Admission Control for Video traffic is Mandatory for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.29 | TruthValue | read-only | deprecated |
| trpzApConfRadioProfCacVideoMaxUtilization OBJECT-TYPE Maximum admission control limit for Video traffic, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.30 | Unsigned32 | read-only | deprecated |
| trpzApConfRadioProfCacVideoPolicingEnabled OBJECT-TYPE Indicates that admission control Policing for Video traffic is enabled, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.31 | TruthValue | read-only | deprecated |
| trpzApConfRadioProfCacVoiceACMandatory OBJECT-TYPE Indicates that Admission Control for Voice traffic is Mandatory for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.32 | TruthValue | read-only | deprecated |
| trpzApConfRadioProfCacVoiceMaxUtilization OBJECT-TYPE Maximum admission control limit for Voice traffic, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.33 | Unsigned32 | read-only | deprecated |
| trpzApConfRadioProfCacVoicePolicingEnabled OBJECT-TYPE Indicates that admission control Policing for Voice traffic is enabled, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.34 | TruthValue | read-only | deprecated |
| trpzApConfRadioProfRfidTagEnabled OBJECT-TYPE Indicates whether an AP radio using this radio profile is enabled to function as location receivers in an AeroScout Visibility System. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.35 | TruthValue | read-only | deprecated |
| trpzApConfRadioProfWmmPowerSaveEnabled OBJECT-TYPE Indicates whether the AP radios using this radio profile enable power save mode on WMM clients. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.36 | TruthValue | read-only | deprecated |
| trpzApConfRadioProfRateEnforcementEnabled OBJECT-TYPE Indicates whether data rates are enforced for the AP radios using this radio profile, which means that a connecting client must transmit at one of the mandatory or standard rates in order to associate with the AP. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.37 | TruthValue | read-only | deprecated |
| trpzApConfRadioProfDfsChannelsEnabled OBJECT-TYPE Indicates that the AP radios using this radio profile use DFS channels to meet regulatory requirements. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.38 | TruthValue | read-only | deprecated |
| trpzApConfRadioProfRFSpectralScanModeEnabled OBJECT-TYPE Indicates whether Spectral Scanning Mode is enabled for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.39 | TruthValue | read-only | deprecated |
| trpzApConfRadioProfRFSpectralScanPriority OBJECT-TYPE The Priority when a Spectral Scan sample time arrives for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long. | 1.3.6.1.4.1.14525.4.14.1.6.1.40 | TrpzRadioProfileRFSpectralScanPriority | read-only | deprecated |
| trpzApConfRadioProfRadioProfileFullName OBJECT-TYPE The full name of the Radio Profile. Indicates the entry in the new Radio Profile table (trpzApConfRadioProfile32Table). | 1.3.6.1.4.1.14525.4.14.1.6.1.41 | DisplayString | read-only | deprecated |
| trpzApConfRadioProfServiceProfileTable OBJECT-TYPE A table describing the currently configured connections between Radio Profiles and Service Profiles. Deprecated by trpzApConfRadioProf32ServiceProfileTable, which allows 32 characters long Radio Profile Names in the index. | 1.3.6.1.4.1.14525.4.14.1.7 | not-accessible | deprecated | |
| trpzApConfRadioProfServiceProfileEntry OBJECT-TYPE Connection between a Radio Profile and a Service Profile, currently configured on the AC. This table (trpzApConfRadioProfServiceProfileTable) has been deprecated by trpzApConfRadioProf32ServiceProfileTable, which allows 32 characters long Radio Profile Names in the index. | 1.3.6.1.4.1.14525.4.14.1.7.1 | not-accessible | deprecated | |
| trpzApConfRpServpRadioProfileName OBJECT-TYPE Name of this Radio Profile. This table (trpzApConfRadioProfServiceProfileTable) has been deprecated by trpzApConfRadioProf32ServiceProfileTable, which allows 32 characters long Radio Profile Names in the index. | 1.3.6.1.4.1.14525.4.14.1.7.1.1 | TrpzRadioProfileName | not-accessible | deprecated |
| trpzApConfRpServpServiceProfileName OBJECT-TYPE Name of a Service Profile connected to this Radio Profile. This table (trpzApConfRadioProfServiceProfileTable) has been deprecated by trpzApConfRadioProf32ServiceProfileTable, which allows 32 characters long Radio Profile Names in the index. | 1.3.6.1.4.1.14525.4.14.1.7.1.2 | TrpzServiceProfileName | not-accessible | deprecated |
| trpzApConfRpServpRowStatus OBJECT-TYPE This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. Only these two values 'createAndGo' and 'destroy' will be accepted. This table (trpzApConfRadioProfServiceProfileTable) has been deprecated by trpzApConfRadioProf32ServiceProfileTable, which allows 32 characters long Radio Profile Names in the index. | 1.3.6.1.4.1.14525.4.14.1.7.1.3 | RowStatus | read-create | deprecated |
| trpzApConfRadioProfSnoopFilterTable OBJECT-TYPE A table describing the currently configured connections between Radio Profiles and Snoop Filters. Deprecated by trpzApConfRadioProf32SnoopFilterTable, which allows 32 characters long Radio Profile Names in the index. | 1.3.6.1.4.1.14525.4.14.1.8 | not-accessible | deprecated | |
| trpzApConfRadioProfSnoopFilterEntry OBJECT-TYPE Connection between a Radio Profile and a Snoop Filter, currently configured on the AC. This table (trpzApConfRadioProfSnoopFilterTable) has been deprecated by trpzApConfRadioProf32SnoopFilterTable, which allows 32 characters long Radio Profile Names in the index. | 1.3.6.1.4.1.14525.4.14.1.8.1 | not-accessible | deprecated | |
| trpzApConfRpSnoopfRadioProfileName OBJECT-TYPE Name of this Radio Profile. This table (trpzApConfRadioProfSnoopFilterTable) has been deprecated by trpzApConfRadioProf32SnoopFilterTable, which allows 32 characters long Radio Profile Names in the index. | 1.3.6.1.4.1.14525.4.14.1.8.1.1 | TrpzRadioProfileName | not-accessible | deprecated |
| trpzApConfRpSnoopfSnoopFilterName OBJECT-TYPE Name of a Snoop Filter connected to this Radio Profile. This table (trpzApConfRadioProfSnoopFilterTable) has been deprecated by trpzApConfRadioProf32SnoopFilterTable, which allows 32 characters long Radio Profile Names in the index. | 1.3.6.1.4.1.14525.4.14.1.8.1.2 | TrpzSnoopFilterName | not-accessible | deprecated |
| trpzApConfRpSnoopfRowStatus OBJECT-TYPE This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. Only these two values 'createAndGo' and 'destroy' will be accepted. This table (trpzApConfRadioProfSnoopFilterTable) has been deprecated by trpzApConfRadioProf32SnoopFilterTable, which allows 32 characters long Radio Profile Names in the index. | 1.3.6.1.4.1.14525.4.14.1.8.1.3 | RowStatus | read-create | deprecated |
| trpzApConfServiceProfileTable OBJECT-TYPE A table describing the Service Profiles currently configured on this AC. | 1.3.6.1.4.1.14525.4.14.1.9 | not-accessible | current | |
| trpzApConfServiceProfileEntry OBJECT-TYPE Configuration for a particular Service Profile. | 1.3.6.1.4.1.14525.4.14.1.9.1 | not-accessible | current | |
| trpzApConfServProfServiceProfileName OBJECT-TYPE Name of this service profile | 1.3.6.1.4.1.14525.4.14.1.9.1.1 | TrpzServiceProfileName | not-accessible | current |
| trpzApConfServProfSsidType OBJECT-TYPE The type of this service profile (clear/crypto). | 1.3.6.1.4.1.14525.4.14.1.9.1.2 | TrpzServiceProfileSsidType | read-only | current |
| trpzApConfServProfBeaconEnabled OBJECT-TYPE Indicates whether beacons are enabled for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.3 | TruthValue | read-only | current |
| trpzApConfServProf11naMode OBJECT-TYPE Indicates the 802.11n (na) mode for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.4 | TrpzServiceProfile11nMode | read-only | current |
| trpzApConfServProf11ngMode OBJECT-TYPE Indicates the 802.11n (ng) mode for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.5 | TrpzServiceProfile11nMode | read-only | current |
| trpzApConfServProf11nShortGuardIntervalEnabled OBJECT-TYPE Indicates whether short guard interval is enabled for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.6 | TruthValue | read-only | current |
| trpzApConfServProf11nFrameAggregation OBJECT-TYPE Indicates the Frame Aggregation mode for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.7 | TrpzServiceProfile11nFrameAggregationType | read-only | current |
| trpzApConfServProf11nMsduMaxLength OBJECT-TYPE The maximum MSDU length for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.8 | TrpzServiceProfile11nMsduMaxLength | read-only | current |
| trpzApConfServProf11nMpduMaxLength OBJECT-TYPE The maximum MPDU length for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.9 | TrpzServiceProfile11nMpduMaxLength | read-only | current |
| trpzApConfServProfAuthFallthru OBJECT-TYPE The authentication type to be attempted for users who do not match a 802.1X or MAC authentication rule, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.10 | TrpzServiceProfileAuthFallthruType | read-only | current |
| trpzApConfServProfWebAAAForm OBJECT-TYPE The custom login page that loads for WebAAA users, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.11 | DisplayString (SIZE(0..64)) | read-only | current |
| trpzApConfServProfSharedKeyAuthEnabled OBJECT-TYPE Indicates whether shared-key authentication is enabled for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.12 | TruthValue | read-only | current |
| trpzApConfServProfWpaIeEnabled OBJECT-TYPE Indicates whether WPA IE beaconing is enabled for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.13 | TruthValue | read-only | current |
| trpzApConfServProfWpaIeCipherTkipEnabled OBJECT-TYPE Indicates whether TKIP cipher is advertised in WPA IE, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.14 | TruthValue | read-only | current |
| trpzApConfServProfWpaIeCipherCcmpEnabled OBJECT-TYPE Indicates whether CCMP cipher is advertised in WPA IE, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.15 | TruthValue | read-only | current |
| trpzApConfServProfWpaIeCipherWep40Enabled OBJECT-TYPE Indicates whether WEP-40 cipher is advertised in WPA IE, for this service profile. Obsoleted: not supported anymore. | 1.3.6.1.4.1.14525.4.14.1.9.1.16 | TruthValue | read-only | obsolete |
| trpzApConfServProfWpaIeCipherWep104Enabled OBJECT-TYPE Indicates whether WEP-104 cipher is advertised in WPA IE, for this service profile. Obsoleted: not supported anymore. | 1.3.6.1.4.1.14525.4.14.1.9.1.17 | TruthValue | read-only | obsolete |
| trpzApConfServProfWpaIeAuthDot1xEnabled OBJECT-TYPE Indicates whether 802.1X authentication is advertised in WPA IE, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.18 | TruthValue | read-only | current |
| trpzApConfServProfWpaIeAuthPskEnabled OBJECT-TYPE Indicates whether Pre-Shared Key authentication is advertised in WPA IE, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.19 | TruthValue | read-only | current |
| trpzApConfServProfRsnIeEnabled OBJECT-TYPE Indicates whether RSN IE beaconing is enabled for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.20 | TruthValue | read-only | current |
| trpzApConfServProfRsnIeCipherTkipEnabled OBJECT-TYPE Indicates whether TKIP cipher is advertised in RSN IE, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.21 | TruthValue | read-only | current |
| trpzApConfServProfRsnIeCipherCcmpEnabled OBJECT-TYPE Indicates whether CCMP cipher is advertised in RSN IE, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.22 | TruthValue | read-only | current |
| trpzApConfServProfRsnIeCipherWep40Enabled OBJECT-TYPE Indicates whether WEP-40 cipher is advertised in RSN IE, for this service profile. Obsoleted: not supported anymore. | 1.3.6.1.4.1.14525.4.14.1.9.1.23 | TruthValue | read-only | obsolete |
| trpzApConfServProfRsnIeCipherWep104Enabled OBJECT-TYPE Indicates whether WEP-104 cipher is advertised in RSN IE, for this service profile. Obsoleted: not supported anymore. | 1.3.6.1.4.1.14525.4.14.1.9.1.24 | TruthValue | read-only | obsolete |
| trpzApConfServProfRsnIeAuthDot1xEnabled OBJECT-TYPE Indicates whether 802.1X authentication is advertised in RSN IE, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.25 | TruthValue | read-only | current |
| trpzApConfServProfRsnIeAuthPskEnabled OBJECT-TYPE Indicates whether Pre-Shared Key authentication is advertised in RSN IE, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.26 | TruthValue | read-only | current |
| trpzApConfServProfTkipMicCountermeasuresTime OBJECT-TYPE Indicates the TKIP MIC countermeasures time in milliseconds for this service profile. This is the length of time that AP radios use countermeasures if two Message Integrity Code (MIC) failures occur within 60 seconds. | 1.3.6.1.4.1.14525.4.14.1.9.1.27 | Unsigned32 | read-only | current |
| trpzApConfServProfMaxBandwidthKbps OBJECT-TYPE The bandwidth limit for this service profile, in Kbits/second. A value of zero means unlimited. | 1.3.6.1.4.1.14525.4.14.1.9.1.28 | Unsigned32 | read-only | current |
| trpzApConfServProfCacMode OBJECT-TYPE The Call Admission Control (CAC) mode, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.29 | TrpzServiceProfileCacMode | read-only | current |
| trpzApConfServProfCacSessCount OBJECT-TYPE The maximum number of active sessions a radio can have when session-based CAC is enabled, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.30 | Unsigned32 | read-only | current |
| trpzApConfServProfUserIdleTimeout OBJECT-TYPE The number of seconds MSS has a session available for a client not sending data and is not responding to keepalives (idle-client probes). If the timer expires, the client session is changed to the Dissociated state, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.31 | Unsigned32 | read-only | current |
| trpzApConfServProfIdleClientProbingEnabled OBJECT-TYPE Indicates whether the AC radio sends a unicast null-data frame to each client every 10 seconds, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.32 | TruthValue | read-only | current |
| trpzApConfServProfShortRetryCount OBJECT-TYPE The number of times a radio can send a short unicast frame without receiving an acknowledgment, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.33 | Unsigned32 | read-only | current |
| trpzApConfServProfLongRetryCount OBJECT-TYPE The number of times a radio can send a long unicast frame without receiving an acknowledgment, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.34 | Unsigned32 | read-only | current |
| trpzApConfServProfProxyArpEnabled OBJECT-TYPE Indicates whether proxy ARP is enabled for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.35 | TruthValue | read-only | current |
| trpzApConfServProfDhcpRestrictEnabled OBJECT-TYPE Indicates whether only DHCP traffic is allowed until a newly associated client has been authenticated and authorized, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.36 | TruthValue | read-only | current |
| trpzApConfServProfNoBroadcastEnabled OBJECT-TYPE Indicates whether broadcast ARP and DHCP packets are converted to unicast for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.37 | TruthValue | read-only | current |
| trpzApConfServProfSygateOnDemandEnabled OBJECT-TYPE Indicates whether Sygate On-Demand Manager (SODA Manager) is enabled for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.38 | TruthValue | read-only | current |
| trpzApConfServProfEnforceChecksEnabled OBJECT-TYPE Indicates whether Enforcement of the SODA security checks is enabled for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.39 | TruthValue | read-only | current |
| trpzApConfServProfSodaRemediationAcl OBJECT-TYPE Remediation page ACL to apply to the client when the failure page is loaded, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.40 | DisplayString (SIZE(0..255)) | read-only | current |
| trpzApConfServProfSodaSuccessPage OBJECT-TYPE Success page that is displayed on the client when a client successfully runs the checks performed by the SODA agent, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.41 | DisplayString (SIZE(0..255)) | read-only | current |
| trpzApConfServProfSodaFailurePage OBJECT-TYPE Failure page that is displayed on the client when the SODA agent checks fail, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.42 | DisplayString (SIZE(0..255)) | read-only | current |
| trpzApConfServProfSodaLogoutPage OBJECT-TYPE The page to load when a client closes the SODA virtual desktop and logs out of the network, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.43 | DisplayString (SIZE(0..255)) | read-only | current |
| trpzApConfServProfSodaAgentDirectory OBJECT-TYPE Specifies a different directory for the SODA agent files used for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.44 | DisplayString (SIZE(0..255)) | read-only | current |
| trpzApConfServProfWebPortalSessionTimeout OBJECT-TYPE Time interval, in seconds, for which a Web Portal WebAAA session remains in the Deassociated state before being terminated automatically, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.45 | Unsigned32 | read-only | current |
| trpzApConfServProfWebPortalAcl OBJECT-TYPE Name of ACL used for filtering traffic for Web Portal users during authentication, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.46 | DisplayString (SIZE(0..255)) | read-only | current |
| trpzApConfServProfWebPortalLogoutEnabled OBJECT-TYPE Indicates whether the Web Portal logout functionality is enabled for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.47 | TruthValue | read-only | current |
| trpzApConfServProfWebPortalLogoutUrl OBJECT-TYPE Indicates the Web Portal Logout URL for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.48 | DisplayString (SIZE(0..64)) | read-only | current |
| trpzApConfServProfKeepInitialVlanEnabled OBJECT-TYPE Indicates whether, after roaming, the user keeps the VLAN assigned from the first connection, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.49 | TruthValue | read-only | current |
| trpzApConfServProfMeshModeEnabled OBJECT-TYPE Indicates whether wireless mesh between APs is enabled for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.50 | TruthValue | read-only | current |
| trpzApConfServProfBridgingEnabled OBJECT-TYPE Indicates whether wireless bridging of traffic between APs is enabled for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.51 | TruthValue | read-only | current |
| trpzApConfServProfLoadBalanceExemptEnabled OBJECT-TYPE Indicates whether this service profile is exempted from load balancing. | 1.3.6.1.4.1.14525.4.14.1.9.1.52 | TruthValue | read-only | current |
| trpzApConfServProfM2UConversionEnabled OBJECT-TYPE Indicates whether multicast IPv4 traffic on the wire is converted to unicast traffic for the wireless clients, for this service profile. | 1.3.6.1.4.1.14525.4.14.1.9.1.53 | TruthValue | read-only | current |
| trpzApConfServProfBackupSsidMode OBJECT-TYPE Indicates the availability of backup SSIDs at a remote site. Backup SSIDs allow access to new clients when central site outage occurs. | 1.3.6.1.4.1.14525.4.14.1.9.1.54 | TrpzBackupSsidMode | read-only | current |
| trpzApConfServProfBackupSsidTimeout OBJECT-TYPE Indicates how many seconds the backup SSIDs at a remote site will stay up after the outage ends. Value 0 means that the backup SSIDs will stay up indefinitely. | 1.3.6.1.4.1.14525.4.14.1.9.1.55 | Unsigned32 | read-only | current |
| trpzApConfServProfBackupSsidKeepClients OBJECT-TYPE Indicates whether the existing client sessions at a remote site will be kept or not when central site outage occurs. | 1.3.6.1.4.1.14525.4.14.1.9.1.56 | TruthValue | read-only | current |
| trpzApConfServProfWebPortalLogoutForm OBJECT-TYPE The custom logout page that will be displayed for Web Portal users, for this service profile. An empty string means that the default page will be displayed. | 1.3.6.1.4.1.14525.4.14.1.9.1.57 | DisplayString (SIZE(0..64)) | read-only | current |
| trpzApConfSnoopFilterTable OBJECT-TYPE A table describing the Snoop Filters currently configured on this AC. | 1.3.6.1.4.1.14525.4.14.1.10 | not-accessible | current | |
| trpzApConfSnoopFilterEntry OBJECT-TYPE Configuration for a particular Snoop Filter. | 1.3.6.1.4.1.14525.4.14.1.10.1 | not-accessible | current | |
| trpzApConfSnoopFilterName OBJECT-TYPE Name of this snoop filter. | 1.3.6.1.4.1.14525.4.14.1.10.1.1 | TrpzSnoopFilterName | not-accessible | current |
| trpzApConfSnoopFilterEnabled OBJECT-TYPE Indicates whether this snoop filter is enabled. | 1.3.6.1.4.1.14525.4.14.1.10.1.2 | TruthValue | read-only | current |
| trpzApConfSnoopFilterObserverAddrType OBJECT-TYPE The address type of 'trpzApConfSnoopFilterObserverAddr'. If no snoop observer is configured for a particular filter, this object will return 'unknown(0)' for that filter. | 1.3.6.1.4.1.14525.4.14.1.10.1.3 | InetAddressType | read-only | current |
| trpzApConfSnoopFilterObserverAddr OBJECT-TYPE The IP address of the snoop observer. If no observer is configured for a particular snoop filter, this object will return an empty string for that filter. The type of this address is specified in 'trpzApConfSnoopFilterObserverAddrType'. | 1.3.6.1.4.1.14525.4.14.1.10.1.4 | InetAddress | read-only | current |
| trpzApConfRadioSnoopFilterTable OBJECT-TYPE A table describing the associations of Snoop Filters with AP radios. | 1.3.6.1.4.1.14525.4.14.1.11 | not-accessible | current | |
| trpzApConfRadioSnoopFilterEntry OBJECT-TYPE Multiple snoop filters can be associated with one AP radio. A snoop filter can be associated with multiple AP radios. A combination of an AP number, a radio number and a filter name uniquely identifies the mapping of a filter to a specific radio. | 1.3.6.1.4.1.14525.4.14.1.11.1 | not-accessible | current | |
| trpzApConfRadioSnoopFilterRowStatus OBJECT-TYPE This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. Only these two values 'createAndGo' and 'destroy' will be accepted. | 1.3.6.1.4.1.14525.4.14.1.11.1.1 | RowStatus | read-create | current |
| trpzApConfSnoopObserverTable OBJECT-TYPE A table describing the snoop observers currently configured on the AC. Snoop observers are hosts where snooped packets are sent. | 1.3.6.1.4.1.14525.4.14.1.12 | not-accessible | current | |
| trpzApConfSnoopObserverEntry OBJECT-TYPE The configuration of a particular snoop observer. | 1.3.6.1.4.1.14525.4.14.1.12.1 | not-accessible | current | |
| trpzApConfSnoopObserverTargetAddrType OBJECT-TYPE The address type of 'trpzApConfSnoopObserverTargetAddr'. | 1.3.6.1.4.1.14525.4.14.1.12.1.1 | InetAddressType | not-accessible | current |
| trpzApConfSnoopObserverTargetAddr OBJECT-TYPE The IP address of the snoop observer. The type of this address is specified in 'trpzApConfSnoopObserverTargetAddrType'. | 1.3.6.1.4.1.14525.4.14.1.12.1.2 | InetAddress (SIZE(4 | 16)) | not-accessible | current |
| trpzApConfSnoopObserverSnapLength OBJECT-TYPE Indicates the maximum number of bytes from a filtered packet to be encapsulated in TZSP and sent to the observer. Value 0 means that the entire packet is copied and sent to the observer. | 1.3.6.1.4.1.14525.4.14.1.12.1.3 | Unsigned32 | read-only | current |
| trpzApConfSnoopObserverInterval OBJECT-TYPE Indicates the snooping interval, in milliseconds, for the packets with the same source. Value 0 means no rate limit. | 1.3.6.1.4.1.14525.4.14.1.12.1.4 | Unsigned32 | read-only | current |
| trpzApConfSnoopObserverTxMode OBJECT-TYPE The mode of transmission of snoop packets to this observer. | 1.3.6.1.4.1.14525.4.14.1.12.1.5 | TrpzSnoopObserverTxMode | read-only | current |
| trpzApConfRemoteSiteTable OBJECT-TYPE A table describing the remote sites currently configured on the AC. A remote site is a group of APs situated in the same location (site/branch), other than the location of the controller. | 1.3.6.1.4.1.14525.4.14.1.13 | not-accessible | current | |
| trpzApConfRemoteSiteEntry OBJECT-TYPE Description of a remote site currently configured on the AC. | 1.3.6.1.4.1.14525.4.14.1.13.1 | not-accessible | current | |
| trpzApConfRemoteSiteName OBJECT-TYPE The name of the remote site. | 1.3.6.1.4.1.14525.4.14.1.13.1.1 | DisplayString (SIZE(1..32)) | not-accessible | current |
| trpzApConfRemoteSiteCountryCode OBJECT-TYPE Indicates the country code used for the configuration of the APs at the remote site. The system country code is used by default, in which case this object will return the special value 'NONE'. | 1.3.6.1.4.1.14525.4.14.1.13.1.2 | DisplayString (SIZE(2 | 4)) | read-only | current |
| trpzApConfRemoteSitePathMtu OBJECT-TYPE The configured MTU between the APs at the remote site and the ACs at the central site. The value 0 means that the MTU was not administratively configured. | 1.3.6.1.4.1.14525.4.14.1.13.1.3 | Unsigned32 | read-only | current |
| trpzApConfRemoteSiteBackupSsidsEnabled OBJECT-TYPE Indicates whether the backup SSIDs at this remote site are enabled or not. Backup SSIDs allow access to new clients when central site outage occurs. | 1.3.6.1.4.1.14525.4.14.1.13.1.4 | TruthValue | read-only | current |
| trpzApConfRemoteSiteLogServerEnabled OBJECT-TYPE Indicates whether the APs at the remote site will send syslog messages to a log server. | 1.3.6.1.4.1.14525.4.14.1.13.1.5 | TruthValue | read-only | current |
| trpzApConfRemoteSiteLogServerAddrType OBJECT-TYPE The address type of 'trpzApConfRemoteSiteLogServerAddr'. | 1.3.6.1.4.1.14525.4.14.1.13.1.6 | InetAddressType | read-only | current |
| trpzApConfRemoteSiteLogServerAddr OBJECT-TYPE The address of the log server used by the APs in the remote site. The type of this address is specified in 'trpzApConfRemoteSiteLogServerAddrType'. | 1.3.6.1.4.1.14525.4.14.1.13.1.7 | InetAddress | read-only | current |
| trpzApConfRemoteSiteLogServerPort OBJECT-TYPE The port number of the log server used by the APs in the remote site. | 1.3.6.1.4.1.14525.4.14.1.13.1.8 | Unsigned32 (1..65535) | read-only | current |
| trpzApConfRemoteSiteLogServerSeverity OBJECT-TYPE The minimum severity of the messages sent by the APs in the remote site to the syslog server. | 1.3.6.1.4.1.14525.4.14.1.13.1.9 | TrpzSyslogSeverity | read-only | current |
| trpzApConfRemoteSiteAcPollingEnabled OBJECT-TYPE Indicates whether the AC can poll the APs in this remote site to obtain full information about the AP-managed client sessions. When it is 'false(2)', the AC has limited information about the AP-managed sessions in this remote site. | 1.3.6.1.4.1.14525.4.14.1.13.1.10 | TruthValue | read-only | current |
| trpzApConfRemoteSiteRadiusServerGroupName OBJECT-TYPE Indicates the name of the group of RADIUS servers used in the remote site. An empty string means that no RADIUS server group has been configured for the remote site. | 1.3.6.1.4.1.14525.4.14.1.13.1.11 | DisplayString | read-only | current |
| trpzApConfRemoteSiteRadiusDeadtime OBJECT-TYPE The deadtime value configured for the RADIUS server group of this remote site. This value has precedence over the individual deadtime values of each server in the server group. If RADIUS deadtime is not configured for this remote site, this object will not have an instance in the current row. | 1.3.6.1.4.1.14525.4.14.1.13.1.12 | Unsigned32 | read-only | current |
| trpzApConfRemoteSiteRadiusTimeout OBJECT-TYPE The timeout value configured for the RADIUS server group of this remote site. This value has precedence over the individual timeout values of each server in the server group. If RADIUS timeout is not configured for this remote site, this object will not have an instance in the current row. | 1.3.6.1.4.1.14525.4.14.1.13.1.13 | Unsigned32 | read-only | current |
| trpzApConfRemoteSiteRadiusRetransmit OBJECT-TYPE The retransmit value configured for the RADIUS server group of this remote site. This value has precedence over the individual retransmit values of each server in the server group. If RADIUS retransmit is not configured for this remote site, this object will not have an instance in the current row. | 1.3.6.1.4.1.14525.4.14.1.13.1.14 | Unsigned32 | read-only | current |
| trpzApConfRemoteSiteRadiusNasIdType OBJECT-TYPE The NAS-ID type configured for the RADIUS server group of this remote site. | 1.3.6.1.4.1.14525.4.14.1.13.1.15 | TrpzApRadiusNasIdType | read-only | current |
| trpzApConfRadioProfile32Table OBJECT-TYPE A table describing the Radio Profiles currently configured on this AC. Deprecates trpzApConfRadioProfileTable. | 1.3.6.1.4.1.14525.4.14.1.14 | not-accessible | current | |
| trpzApConfRadioProfile32Entry OBJECT-TYPE Configuration for a particular Radio Profile. | 1.3.6.1.4.1.14525.4.14.1.14.1 | not-accessible | current | |
| trpzApConfRadioProf32RadioProfileName OBJECT-TYPE Name of this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.1 | TrpzRadioProfileName32 | not-accessible | current |
| trpzApConfRadioProf32BeaconInterval OBJECT-TYPE Beacon Interval, time in thousandths of a second, for this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.2 | Unsigned32 | read-only | current |
| trpzApConfRadioProf32DtimInterval OBJECT-TYPE The number of times after every beacon that each AP radio in a radio profile sends a delivery traffic indication map (DTIM), for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.3 | Unsigned32 | read-only | current |
| trpzApConfRadioProf32ChannelWidth11na OBJECT-TYPE 802.11n Channel Width for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.4 | TrpzRadioChannelWidth | read-only | current |
| trpzApConfRadioProf32MaxTxLifetime OBJECT-TYPE The maximum transmit threshold for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.5 | Unsigned32 | read-only | current |
| trpzApConfRadioProf32MaxRxLifetime OBJECT-TYPE The maximum receive threshold for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.6 | Unsigned32 | read-only | current |
| trpzApConfRadioProf32RtsThreshold OBJECT-TYPE The RTS threshold for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.7 | Unsigned32 | read-only | current |
| trpzApConfRadioProf32FragThreshold OBJECT-TYPE The fragmentation threshold for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.8 | Unsigned32 | read-only | current |
| trpzApConfRadioProf32LongXmitPreambleEnabled OBJECT-TYPE Indicates whether an 802.11b/g AP radio using this radio profile transmits Long Preamble. | 1.3.6.1.4.1.14525.4.14.1.14.1.9 | TruthValue | read-only | current |
| trpzApConfRadioProf32CountermeasuresMode OBJECT-TYPE Countermeasures Mode for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.10 | TrpzRadioProfileCountermeasuresMode | read-only | current |
| trpzApConfRadioProf32RFScanMode OBJECT-TYPE RF Scanning Mode for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.11 | TrpzRadioProfileRFScanMode | read-only | current |
| trpzApConfRadioProf32RFScanChannelScope OBJECT-TYPE RF scanning Channel Scope for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.12 | TrpzRadioProfileRFScanChannelScope | read-only | current |
| trpzApConfRadioProf32RFScanCTSEnabled OBJECT-TYPE Indicates whether the AP radios using this radio profile send CTS To Self packet before going off channel. | 1.3.6.1.4.1.14525.4.14.1.14.1.13 | TruthValue | read-only | current |
| trpzApConfRadioProf32AutoTunePowerEnabled OBJECT-TYPE Indicates whether Power Auto-Tuning is enabled for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.14 | TruthValue | read-only | current |
| trpzApConfRadioProf32AutoTunePowerRampInterval OBJECT-TYPE Minimum Interval (in seconds) between Power changes due to Auto-Tuning, for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.15 | Unsigned32 | read-only | current |
| trpzApConfRadioProf32AutoTunePowerChangeInterval OBJECT-TYPE The interval (in seconds) at which RF Auto-Tuning decides whether to Change the Power for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.16 | Unsigned32 | read-only | current |
| trpzApConfRadioProf32FairQueuingEnabled OBJECT-TYPE Indicates whether weighted Fair Queuing is enabled for this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.17 | TruthValue | read-only | current |
| trpzApConfRadioProf32CacBackgroundACMandatory OBJECT-TYPE Indicates whether Admission Control for Background traffic is Mandatory for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.18 | TruthValue | read-only | current |
| trpzApConfRadioProf32CacBackgroundMaxUtilization OBJECT-TYPE Maximum admission control limit for Background traffic, for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.19 | Unsigned32 | read-only | current |
| trpzApConfRadioProf32CacBackgroundPolicingEnabled OBJECT-TYPE Indicates that admission control Policing for Background traffic is enabled, for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.20 | TruthValue | read-only | current |
| trpzApConfRadioProf32CacBestEffortACMandatory OBJECT-TYPE Indicates that Admission Control for Best Effort traffic is Mandatory for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.21 | TruthValue | read-only | current |
| trpzApConfRadioProf32CacBestEffortMaxUtilization OBJECT-TYPE Maximum admission control limit for Best Effort traffic, for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.22 | Unsigned32 | read-only | current |
| trpzApConfRadioProf32CacBestEffortPolicingEnabled OBJECT-TYPE Indicates that admission control Policing for Best Effort traffic is enabled, for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.23 | TruthValue | read-only | current |
| trpzApConfRadioProf32CacVideoACMandatory OBJECT-TYPE Indicates that Admission Control for Video traffic is Mandatory for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.24 | TruthValue | read-only | current |
| trpzApConfRadioProf32CacVideoMaxUtilization OBJECT-TYPE Maximum admission control limit for Video traffic, for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.25 | Unsigned32 | read-only | current |
| trpzApConfRadioProf32CacVideoPolicingEnabled OBJECT-TYPE Indicates that admission control Policing for Video traffic is enabled, for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.26 | TruthValue | read-only | current |
| trpzApConfRadioProf32CacVoiceACMandatory OBJECT-TYPE Indicates that Admission Control for Voice traffic is Mandatory for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.27 | TruthValue | read-only | current |
| trpzApConfRadioProf32CacVoiceMaxUtilization OBJECT-TYPE Maximum admission control limit for Voice traffic, for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.28 | Unsigned32 | read-only | current |
| trpzApConfRadioProf32CacVoicePolicingEnabled OBJECT-TYPE Indicates that admission control Policing for Voice traffic is enabled, for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.29 | TruthValue | read-only | current |
| trpzApConfRadioProf32RfidTagEnabled OBJECT-TYPE Indicates whether an AP radio using this radio profile is enabled to function as location receivers in an AeroScout Visibility System. | 1.3.6.1.4.1.14525.4.14.1.14.1.30 | TruthValue | read-only | current |
| trpzApConfRadioProf32WmmPowerSaveEnabled OBJECT-TYPE Indicates whether the AP radios using this radio profile enable power save mode on WMM clients. | 1.3.6.1.4.1.14525.4.14.1.14.1.31 | TruthValue | read-only | current |
| trpzApConfRadioProf32RateEnforcementEnabled OBJECT-TYPE Indicates whether data rates are enforced for the AP radios using this radio profile, which means that a connecting client must transmit at one of the mandatory or standard rates in order to associate with the AP. | 1.3.6.1.4.1.14525.4.14.1.14.1.32 | TruthValue | read-only | current |
| trpzApConfRadioProf32DfsChannelsEnabled OBJECT-TYPE Indicates that the AP radios using this radio profile use DFS channels to meet regulatory requirements. | 1.3.6.1.4.1.14525.4.14.1.14.1.33 | TruthValue | read-only | current |
| trpzApConfRadioProf32RFSpectralScanModeEnabled OBJECT-TYPE Indicates whether Spectral Scanning Mode is enabled for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.34 | TruthValue | read-only | current |
| trpzApConfRadioProf32RFSpectralScanPriority OBJECT-TYPE The Priority when a Spectral Scan sample time arrives for the AP radios using this radio profile. | 1.3.6.1.4.1.14525.4.14.1.14.1.35 | TrpzRadioProfileRFSpectralScanPriority | read-only | current |
| trpzApConfRadioProf32ServiceProfileTable OBJECT-TYPE A table describing the currently configured connections between Radio Profiles and Service Profiles. Deprecates trpzApConfRadioProfServiceProfileTable. | 1.3.6.1.4.1.14525.4.14.1.15 | not-accessible | current | |
| trpzApConfRadioProf32ServiceProfileEntry OBJECT-TYPE Connection between a Radio Profile and a Service Profile, currently configured on the AC. | 1.3.6.1.4.1.14525.4.14.1.15.1 | not-accessible | current | |
| trpzApConfRp32ServpRadioProfileName OBJECT-TYPE Name of this Radio Profile. | 1.3.6.1.4.1.14525.4.14.1.15.1.1 | TrpzRadioProfileName32 | not-accessible | current |
| trpzApConfRp32ServpServiceProfileName OBJECT-TYPE Name of a Service Profile connected to this Radio Profile. | 1.3.6.1.4.1.14525.4.14.1.15.1.2 | TrpzServiceProfileName | not-accessible | current |
| trpzApConfRp32ServpRowStatus OBJECT-TYPE This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. Only these two values 'createAndGo' and 'destroy' will be accepted. | 1.3.6.1.4.1.14525.4.14.1.15.1.3 | RowStatus | read-create | current |
| trpzApConfRadioProf32SnoopFilterTable OBJECT-TYPE A table describing the currently configured connections between Radio Profiles and Snoop Filters. Deprecates trpzApConfRadioProfSnoopFilterTable. | 1.3.6.1.4.1.14525.4.14.1.16 | not-accessible | current | |
| trpzApConfRadioProf32SnoopFilterEntry OBJECT-TYPE Connection between a Radio Profile and a Snoop Filter, currently configured on the AC. | 1.3.6.1.4.1.14525.4.14.1.16.1 | not-accessible | current | |
| trpzApConfRp32SnoopfRadioProfileName OBJECT-TYPE Name of this Radio Profile. | 1.3.6.1.4.1.14525.4.14.1.16.1.1 | TrpzRadioProfileName32 | not-accessible | current |
| trpzApConfRp32SnoopfSnoopFilterName OBJECT-TYPE Name of a Snoop Filter connected to this Radio Profile. | 1.3.6.1.4.1.14525.4.14.1.16.1.2 | TrpzSnoopFilterName | not-accessible | current |
| trpzApConfRp32SnoopfRowStatus OBJECT-TYPE This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. Only these two values 'createAndGo' and 'destroy' will be accepted. | 1.3.6.1.4.1.14525.4.14.1.16.1.3 | RowStatus | read-create | current |
| trpzApConfigConformance OBJECT-IDENTITY | 1.3.6.1.4.1.14525.4.14.2 | |||
| trpzApConfigCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.14525.4.14.2.1 | |||
| trpzApConfigGroups OBJECT-IDENTITY | 1.3.6.1.4.1.14525.4.14.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| trpzApConfigCompliance MODULE-COMPLIANCE The compliance statement for devices that implement AP Config MIB. | 1.3.6.1.4.1.14525.4.14.2.1.1 | obsolete |
| trpzApConfigComplianceRev2 MODULE-COMPLIANCE The compliance statement for devices that implement AP Config MIB. This compliance statement is for releases 7.5 to 7.6 of AC (wireless switch) software. This compliance statement is replaced by trpzApConfigComplianceRev3. | 1.3.6.1.4.1.14525.4.14.2.1.2 | obsolete |
| trpzApConfigComplianceRev3 MODULE-COMPLIANCE The compliance statement for devices that implement AP Config MIB. This compliance statement is for release 7.7 of AC (wireless switch) software. This compliance statement is replaced by trpzApConfigComplianceRev4. | 1.3.6.1.4.1.14525.4.14.2.1.3 | obsolete |
| trpzApConfigComplianceRev4 MODULE-COMPLIANCE The compliance statement for devices that implement AP Config MIB. This compliance statement is for release 8.0 of AC (wireless switch) software. This compliance statement is replaced by trpzApConfigComplianceRev5. | 1.3.6.1.4.1.14525.4.14.2.1.4 | obsolete |
| trpzApConfigComplianceRev5 MODULE-COMPLIANCE The compliance statement for devices that implement AP Config MIB. This compliance statement is for releases 9.0 and greater of AC (wireless switch) software. | 1.3.6.1.4.1.14525.4.14.2.1.5 | current |
| trpzApConfApConfigTableGroup OBJECT-GROUP Group of columnar objects implemented to provide AP Configuration info in releases 7.1 to 7.6. Replaced by trpzApConfApConfigTableGroupRev2. | 1.3.6.1.4.1.14525.4.14.2.2.1 | obsolete |
| trpzApConfRadioConfigTableGroup OBJECT-GROUP Group of columnar objects implemented to provide Radio Configuration info in releases 7.1 to 8.0. Replaced by trpzApConfRadioConfigTableGroupRev2. | 1.3.6.1.4.1.14525.4.14.2.2.2 | obsolete |
| trpzApConfApTemplateConfigTableGroup OBJECT-GROUP Group of columnar objects implemented to provide AP Configuration Template info in releases 7.1 and greater. | 1.3.6.1.4.1.14525.4.14.2.2.3 | current |
| trpzApConfApTemplateRadioConfigTableGroup OBJECT-GROUP Group of columnar objects implemented to provide Radio Configuration Template info in releases 7.1 to 8.0. Replaced by trpzApConfApTemplateRadioConfigTableGroupRev2. | 1.3.6.1.4.1.14525.4.14.2.2.4 | obsolete |
| trpzApConfRadioProfileTableGroup OBJECT-GROUP Group of columnar objects implemented to provide Radio Profile configuration info in releases 7.1 to 7.7. Replaced by trpzApConfRadioProfileTableGroupRev2. | 1.3.6.1.4.1.14525.4.14.2.2.5 | obsolete |
| trpzApConfRadioProfServiceProfileTableGroup OBJECT-GROUP Group of columnar objects implemented to provide Service Profiles associated to each Radio Profile in releases 7.1 to 8.0. Replaced by trpzApConfRadioProf32ServiceProfileTableGroup. | 1.3.6.1.4.1.14525.4.14.2.2.6 | obsolete |
| trpzApConfRadioProfSnoopFilterTableGroup OBJECT-GROUP Group of columnar objects implemented to provide Snoop Filters associated to each Radio Profile in releases 7.1 to 8.0. Replaced by trpzApConfRadioProf32SnoopFilterTableGroup. | 1.3.6.1.4.1.14525.4.14.2.2.7 | obsolete |
| trpzApConfServiceProfileTableGroup OBJECT-GROUP Group of columnar objects implemented to provide Service Profile configuration info in releases 7.1 and greater. | 1.3.6.1.4.1.14525.4.14.2.2.8 | obsolete |
| trpzApConfSnoopFilterTableGroup OBJECT-GROUP Group of columnar objects implemented to provide Snoop Filter configuration info in releases 7.1 to 7.6. Replaced by trpzApConfSnoopFilterTableGroupRev2. | 1.3.6.1.4.1.14525.4.14.2.2.9 | obsolete |
| trpzApConfServiceProfileTableGroupRev2 OBJECT-GROUP Group of columnar objects implemented to provide Service Profile configuration info in releases 7.5 to 7.6. Replaced by trpzApConfServiceProfileTableGroupRev3. | 1.3.6.1.4.1.14525.4.14.2.2.10 | obsolete |
| trpzApConfApConfigLldpGroup OBJECT-GROUP Group of columnar objects implemented to provide AP LLDP Configuration info in releases 7.5 and greater. | 1.3.6.1.4.1.14525.4.14.2.2.11 | current |
| trpzApConfApConfigTunnelGroup OBJECT-GROUP Group of columnar objects implemented to provide AP to AP tunnel Configuration info in releases 7.5 and greater. | 1.3.6.1.4.1.14525.4.14.2.2.12 | current |
| trpzApConfApConfigRemoteApGroup OBJECT-GROUP Group of columnar objects implemented to provide remote AP related Configuration info in releases 7.5 and greater. | 1.3.6.1.4.1.14525.4.14.2.2.13 | current |
| trpzApConfRadioProfileRFSpectralScanGroup OBJECT-GROUP Group of columnar objects implemented to provide Radio Profile RF Spectral Scanning configuration info in releases 7.5 to 8.0. Replaced by trpzApConfRadioProfileRFSpectralScanGroupRev2. | 1.3.6.1.4.1.14525.4.14.2.2.14 | obsolete |
| trpzApConfApConfigTableGroupRev2 OBJECT-GROUP Group of columnar objects implemented to provide AP Configuration info in releases 7.7 to 8.0. Replaced by trpzApConfApConfigTableGroupRev3. | 1.3.6.1.4.1.14525.4.14.2.2.15 | obsolete |
| trpzApConfSnoopFilterTableGroupRev2 OBJECT-GROUP Group of columnar objects implemented to provide Snoop Filter configuration info in releases 7.7 and greater. | 1.3.6.1.4.1.14525.4.14.2.2.16 | current |
| trpzApConfSnoopObserverTableGroup OBJECT-GROUP Group of columnar objects implemented to provide Snoop Observer configuration info in releases 7.7 and greater. | 1.3.6.1.4.1.14525.4.14.2.2.17 | current |
| trpzApConfRadioSnoopFilterTableGroup OBJECT-GROUP Group of columnar objects implemented to provide info about the associations of Snoop Filters with AP Radios in releases 7.7 and greater. | 1.3.6.1.4.1.14525.4.14.2.2.18 | current |
| trpzApConfServiceProfileTableGroupRev3 OBJECT-GROUP Group of columnar objects implemented to provide Service Profile configuration info in releases 7.7 and greater. | 1.3.6.1.4.1.14525.4.14.2.2.19 | current |
| trpzApConfRemoteSiteTableGroup OBJECT-GROUP Group of columnar objects implemented to provide Remote Site configuration info in releases 7.7 to 8.0. Replaced by trpzApConfRemoteSiteTableGroupRev2. | 1.3.6.1.4.1.14525.4.14.2.2.20 | obsolete |
| trpzApConfRadioProfileTableGroupRev2 OBJECT-GROUP Group of columnar objects implemented to provide Radio Profile configuration info in release 8.0. Replaced by trpzApConfRadioProfile32TableGroup. | 1.3.6.1.4.1.14525.4.14.2.2.21 | obsolete |
| trpzApConfApConfigTableGroupRev3 OBJECT-GROUP Group of columnar objects implemented to provide AP Configuration info in releases 9.0 and greater. | 1.3.6.1.4.1.14525.4.14.2.2.22 | current |
| trpzApConfRadioConfigTableGroupRev2 OBJECT-GROUP Group of columnar objects implemented to provide Radio Configuration info in releases 9.0 and greater. | 1.3.6.1.4.1.14525.4.14.2.2.23 | current |
| trpzApConfApTemplateRadioConfigTableGroupRev2 OBJECT-GROUP Group of columnar objects implemented to provide Radio Configuration Template info in releases 9.0 and greater. | 1.3.6.1.4.1.14525.4.14.2.2.24 | current |
| trpzApConfRadioProfile32TableGroup OBJECT-GROUP Group of columnar objects implemented to provide Radio Profile configuration info in releases 9.0 and greater. | 1.3.6.1.4.1.14525.4.14.2.2.25 | current |
| trpzApConfRadioProfileRFSpectralScanGroupRev2 OBJECT-GROUP Group of columnar objects implemented to provide Radio Profile RF Spectral Scanning configuration info in releases 9.0 and greater. | 1.3.6.1.4.1.14525.4.14.2.2.26 | current |
| trpzApConfRadioProf32ServiceProfileTableGroup OBJECT-GROUP Group of columnar objects implemented to provide Service Profiles associated to each Radio Profile in releases 9.0 and greater. | 1.3.6.1.4.1.14525.4.14.2.2.27 | current |
| trpzApConfRadioProf32SnoopFilterTableGroup OBJECT-GROUP Group of columnar objects implemented to provide Snoop Filters associated to each Radio Profile in releases 9.0 and greater. | 1.3.6.1.4.1.14525.4.14.2.2.28 | current |
| trpzApConfRemoteSiteTableGroupRev2 OBJECT-GROUP Group of columnar objects implemented to provide Remote Site configuration info in releases 9.0 and greater. | 1.3.6.1.4.1.14525.4.14.2.2.29 | current |