TRANZEO-ENROUTE-MUNIWIFI-MIB
- Registered at
- 1.3.6.1.4.1.24350
- Last updated
- 2008-07-01 12:00
- Organization
- www.tranzeo.com
- Revisions
- 2008-07-01 12:00
- Namespace
- tranzeo
- Source file
TRANZEO-ENROUTE-MUNIWIFI-MIB- Digest
sha256:dcc31c705ded4cf5673e6f893d0f5e8116e1d8d6de1e7fae43a1d979d72b3868
Description
The Tranzeo EnRoute platform MIB.
Contact
postal: Ron Dippold Tranzeo Wireless USA 15950 Bernardo Center Drive, Suite J San Diego, CA 92127-1829 email: rdippold@tranzeo.com
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, enterprises, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
SNMPv2-CONF SNMPv2-SMI SNMPv2-TC TRANZEO-ENROUTE-MUNIWIFI-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| version OBJECT-IDENTITY | 1.3.6.1.4.1.24350.1 | |||
| versionDriver80211 OBJECT-TYPE 80211 driver release version | 1.3.6.1.4.1.24350.1.1 | OCTET STRING | read-only | current |
| versionFirmware OBJECT-TYPE firmware release version | 1.3.6.1.4.1.24350.1.2 | OCTET STRING | read-only | current |
| versionLoaded_profile OBJECT-TYPE last mcm cfg-load or cfg-save profile | 1.3.6.1.4.1.24350.1.3 | OCTET STRING | read-only | current |
| versionMcm OBJECT-TYPE mcm version | 1.3.6.1.4.1.24350.1.4 | OCTET STRING | read-only | current |
| versionPatches OBJECT-TYPE applied patches | 1.3.6.1.4.1.24350.1.5 | OCTET STRING | read-only | current |
| versionQos OBJECT-TYPE QoS version | 1.3.6.1.4.1.24350.1.6 | OCTET STRING | read-only | current |
| versionRelease OBJECT-TYPE software release version | 1.3.6.1.4.1.24350.1.7 | OCTET STRING | read-only | current |
| sys OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2 | |||
| sysApply OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.1 | |||
| sysApplyEffect OBJECT-TYPE approximate severity of applying outstanding changes | 1.3.6.1.4.1.24350.2.1.1 | OCTET STRING | read-only | current |
| sysApplyTime OBJECT-TYPE time in seconds to apply outstanding changes | 1.3.6.1.4.1.24350.2.1.2 | INTEGER | read-only | current |
| sysDev OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.2 | |||
| sysDevBattery OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.2.1 | |||
| sysDevBatteryEnable OBJECT-TYPE enable battery | 1.3.6.1.4.1.24350.2.2.1.1 | OCTET STRING | read-write | current |
| sysDevBatteryInstalled OBJECT-TYPE battery hardware could be installed | 1.3.6.1.4.1.24350.2.2.1.2 | OCTET STRING | read-only | current |
| sysDevLed OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.2.2 | |||
| sysDevLedEnable OBJECT-TYPE enable led display | 1.3.6.1.4.1.24350.2.2.2.1 | OCTET STRING | read-write | current |
| sysDevPoe OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.2.3 | |||
| sysDevPoeEnable OBJECT-TYPE supply power over ethernet | 1.3.6.1.4.1.24350.2.2.3.1 | OCTET STRING | read-write | current |
| sysDevPoeInstalled OBJECT-TYPE poe hardware is installed | 1.3.6.1.4.1.24350.2.2.3.2 | OCTET STRING | read-only | current |
| sysDevPoeVoltage OBJECT-TYPE power over ethernet voltage - 24 or 48 | 1.3.6.1.4.1.24350.2.2.3.3 | OCTET STRING | read-write | current |
| sysDevWlan OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.2.4 | |||
| sysDevWlanCountry OBJECT-TYPE ansi country code - 124=canada, 840=us, 826=uk | 1.3.6.1.4.1.24350.2.2.4.1 | INTEGER | read-write | current |
| sysDhcp OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.3 | |||
| sysDhcpArgs OBJECT-TYPE dhcp server arguments | 1.3.6.1.4.1.24350.2.3.1 | OCTET STRING | read-only | current |
| sysDhcpEnableserver OBJECT-TYPE enable dhcp server if any of the interfaces require it | 1.3.6.1.4.1.24350.2.3.2 | OCTET STRING | read-write | current |
| sysDhcpRelay OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.3.3 | |||
| sysDhcpRelayAgent OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.3.3.1 | |||
| sysDhcpRelayAgentBase OBJECT-TYPE base octet to use for alias VAP IP addresses | 1.3.6.1.4.1.24350.2.3.3.1.1 | OCTET STRING | read-write | current |
| sysDhcpRelayArgs OBJECT-TYPE roamd arguments except for -D and -a | 1.3.6.1.4.1.24350.2.3.3.2 | OCTET STRING | read-write | current |
| sysDhcpRelayArpnumbc OBJECT-TYPE number of unsolicited arp broadcasts to establish ips | 1.3.6.1.4.1.24350.2.3.3.3 | INTEGER | read-write | current |
| sysDhcpRelayBindretries OBJECT-TYPE number of interface bind attempts | 1.3.6.1.4.1.24350.2.3.3.4 | INTEGER | read-write | current |
| sysDhcpRelayEnable OBJECT-TYPE use remote dhcp server instead of local | 1.3.6.1.4.1.24350.2.3.3.5 | OCTET STRING | read-write | current |
| sysDhcpRelayExtrahosts OBJECT-TYPE space separated list of extra host ip addresses to consider external | 1.3.6.1.4.1.24350.2.3.3.6 | OCTET STRING | read-write | current |
| sysDhcpRelayGateway OBJECT-TYPE base address to use VAP IP addresses globally | 1.3.6.1.4.1.24350.2.3.3.7 | OCTET STRING | read-write | current |
| sysDhcpRelayImr OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.3.3.8 | |||
| sysDhcpRelayImrNumbc OBJECT-TYPE notification broadcast count | 1.3.6.1.4.1.24350.2.3.3.8.1 | INTEGER | read-write | current |
| sysDhcpRelayProxy OBJECT-TYPE redirect all dhcp traffic to relay on gateway | 1.3.6.1.4.1.24350.2.3.3.9 | OCTET STRING | read-write | current |
| sysDhcpRelayServer OBJECT-TYPE numeric ip address of the external DHCP server | 1.3.6.1.4.1.24350.2.3.3.10 | OCTET STRING | read-write | current |
| sysDhcpRelayStalecheckinterval OBJECT-TYPE check for stale route (seconds) | 1.3.6.1.4.1.24350.2.3.3.11 | INTEGER | read-write | current |
| sysDhcpRelayStatic OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.3.3.12 | |||
| sysDhcpRelayStaticBegin OBJECT-TYPE beginning of statif ip range | 1.3.6.1.4.1.24350.2.3.3.12.1 | OCTET STRING | read-write | current |
| sysDhcpRelayStaticEnable OBJECT-TYPE allow static allocation range | 1.3.6.1.4.1.24350.2.3.3.12.2 | OCTET STRING | read-write | current |
| sysDhcpRelayStaticEnd OBJECT-TYPE end of static ip range | 1.3.6.1.4.1.24350.2.3.3.12.3 | OCTET STRING | read-write | current |
| sysDhcpRelaySubnet OBJECT-TYPE subnet for roamd | 1.3.6.1.4.1.24350.2.3.3.13 | OCTET STRING | read-write | current |
| sysDhcpRelayTunnel OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.3.3.14 | |||
| sysDhcpRelayTunnelEndpoint OBJECT-TYPE tunnel subnet for roamd | 1.3.6.1.4.1.24350.2.3.3.14.1 | OCTET STRING | read-write | current |
| sysDhcpRelayTunnelKeepalive OBJECT-TYPE tunnel keepalive interval in seconds | 1.3.6.1.4.1.24350.2.3.3.14.2 | INTEGER | read-write | current |
| sysDhcpRelayTunnelTimeoutfactor OBJECT-TYPE tunnel timeout factor | 1.3.6.1.4.1.24350.2.3.3.14.3 | INTEGER | read-write | current |
| sysDns OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.4 | |||
| sysDnsServers OBJECT-TYPE space separated DNS server list | 1.3.6.1.4.1.24350.2.4.1 | OCTET STRING | read-write | current |
| sysDnsUpdatestyle OBJECT-TYPE dns update style ('ad-hoc', 'interim', 'none' ) | 1.3.6.1.4.1.24350.2.4.2 | OCTET STRING | read-write | current |
| sysDnsproxy OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.5 | |||
| sysDnsproxyEnable OBJECT-TYPE enable dns proxy | 1.3.6.1.4.1.24350.2.5.1 | OCTET STRING | read-write | current |
| sysDnsproxyHosts OBJECT-TYPE <hostname>=<ip>;<hostname>=<ip>; (etc) | 1.3.6.1.4.1.24350.2.5.2 | OCTET STRING | read-write | current |
| sysDomain OBJECT-TYPE domain for this node | 1.3.6.1.4.1.24350.2.6 | OCTET STRING | read-write | current |
| sysGui OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.7 | |||
| sysGuiUpgrade OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.7.1 | |||
| sysGuiUpgradeForce OBJECT-TYPE gui defaults to forcing upgrade | 1.3.6.1.4.1.24350.2.7.1.1 | OCTET STRING | read-write | current |
| sysHostname OBJECT-TYPE hostname (also set if you change id.node) | 1.3.6.1.4.1.24350.2.8 | OCTET STRING | read-write | current |
| sysHosts OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.9 | |||
| sysHostsNms OBJECT-TYPE hostname or ip address of the network management station (snmp) | 1.3.6.1.4.1.24350.2.9.1 | OCTET STRING | read-write | current |
| sysId OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.10 | |||
| sysIdLanprefix OBJECT-TYPE first octet for non-mesh interfaces | 1.3.6.1.4.1.24350.2.10.1 | OCTET STRING | read-write | current |
| sysIdMesh OBJECT-TYPE 3rd mesh octet (2nd octet for other interfaces in implicit mode) | 1.3.6.1.4.1.24350.2.10.2 | OCTET STRING | read-write | current |
| sysIdMeshprefix OBJECT-TYPE first two octets for mesh | 1.3.6.1.4.1.24350.2.10.3 | OCTET STRING | read-write | current |
| sysIdNode OBJECT-TYPE 4th mesh octet (3rd octet for other interfaces in implicit mode) | 1.3.6.1.4.1.24350.2.10.4 | OCTET STRING | read-write | current |
| sysImplicit OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.11 | |||
| sysImplicitEnable OBJECT-TYPE use implicit addressing scheme - limits ap ranges | 1.3.6.1.4.1.24350.2.11.1 | OCTET STRING | read-write | current |
| sysInfo OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.12 | |||
| sysInfoCluster OBJECT-TYPE freeform string which will be displayed on web pages | 1.3.6.1.4.1.24350.2.12.1 | OCTET STRING | read-write | current |
| sysL2 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.13 | |||
| sysL2Bridge OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.13.1 | |||
| sysL2BridgeEnable OBJECT-TYPE enable level 2 bridge mode | 1.3.6.1.4.1.24350.2.13.1.1 | OCTET STRING | read-write | current |
| sysL2Clientmacfwd OBJECT-TYPE preserve client source mac to gateway and enable gateway proxy_arp | 1.3.6.1.4.1.24350.2.13.2 | OCTET STRING | read-write | current |
| sysL2Hideinternal OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.13.3 | |||
| sysL2HideinternalEnable OBJECT-TYPE hide internal subnets from proxy arps | 1.3.6.1.4.1.24350.2.13.3.1 | OCTET STRING | read-write | current |
| sysL2HideinternalGateway OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.13.3.2 | |||
| sysL2HideinternalGatewayAllow OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.13.3.2.1 | |||
| sysL2HideinternalGatewayAllowRelaydhcp OBJECT-TYPE arp for dhcp relay subnet | 1.3.6.1.4.1.24350.2.13.3.2.1.1 | OCTET STRING | read-write | current |
| sysL2HideinternalGatewayDeny OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.13.3.2.2 | |||
| sysL2HideinternalGatewayDenyAll OBJECT-TYPE deny all proxy arps from gateway, unless .allowed | 1.3.6.1.4.1.24350.2.13.3.2.2.1 | OCTET STRING | read-write | current |
| sysL2HideinternalGatewayDenyMesh OBJECT-TYPE hide mesh from proxy arp | 1.3.6.1.4.1.24350.2.13.3.2.2.2 | OCTET STRING | read-write | current |
| sysLocation OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.14 | |||
| sysLocationGps OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.14.1 | |||
| sysLocationGpsAltitude OBJECT-TYPE gps altitude in meters | 1.3.6.1.4.1.24350.2.14.1.1 | OCTET STRING | read-write | current |
| sysLocationGpsLatitude OBJECT-TYPE gps latitude in decimal degrees | 1.3.6.1.4.1.24350.2.14.1.2 | OCTET STRING | read-write | current |
| sysLocationGpsLongitude OBJECT-TYPE gps longitude in decimal degrees | 1.3.6.1.4.1.24350.2.14.1.3 | OCTET STRING | read-write | current |
| sysLocationPostal OBJECT-TYPE useful description of node's physical location | 1.3.6.1.4.1.24350.2.14.2 | OCTET STRING | read-write | current |
| sysMainstub OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.15 | |||
| sysMainstubIf OBJECT-TYPE interface to multicast network | 1.3.6.1.4.1.24350.2.15.1 | OCTET STRING | read-write | current |
| sysMainstubProxyarp OBJECT-TYPE proxy arp on multicast interface? | 1.3.6.1.4.1.24350.2.15.2 | OCTET STRING | read-write | current |
| sysMonitor OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.16 | |||
| sysMonitorHealth OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.16.1 | |||
| sysMonitorHealthEnable OBJECT-TYPE enable health monitoring for gateway failover | 1.3.6.1.4.1.24350.2.16.1.1 | OCTET STRING | read-write | current |
| sysMonitorHealthHost OBJECT-TYPE host to ping | 1.3.6.1.4.1.24350.2.16.1.2 | OCTET STRING | read-write | current |
| sysNat OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.17 | |||
| sysNatEnable OBJECT-TYPE masquerading (on eth0, if gateway) | 1.3.6.1.4.1.24350.2.17.1 | OCTET STRING | read-write | current |
| sysNetbios OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.18 | |||
| sysNetbiosServers OBJECT-TYPE space separated netbios server list | 1.3.6.1.4.1.24350.2.18.1 | OCTET STRING | read-write | current |
| sysNets OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.19 | |||
| sysNetsExternal OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.19.1 | |||
| sysNetsExternalCombined OBJECT-TYPE coalesced .external.default, external.roamd, and .external.extra subnets | 1.3.6.1.4.1.24350.2.19.1.1 | OCTET STRING | read-only | current |
| sysNetsExternalDefault OBJECT-TYPE subnets considered external to the mesh by default | 1.3.6.1.4.1.24350.2.19.1.2 | OCTET STRING | read-only | current |
| sysNetsExternalExtra OBJECT-TYPE extra subnets to be considered external to the mesh | 1.3.6.1.4.1.24350.2.19.1.3 | OCTET STRING | read-write | current |
| sysNetsInternal OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.19.2 | |||
| sysNetsInternalCombined OBJECT-TYPE coalesced .internal.default and internal.extra internal subnets | 1.3.6.1.4.1.24350.2.19.2.1 | OCTET STRING | read-only | current |
| sysNetsInternalDefault OBJECT-TYPE default mesh-internal subnets | 1.3.6.1.4.1.24350.2.19.2.2 | OCTET STRING | read-only | current |
| sysNetsInternalExtra OBJECT-TYPE added to .default internal subnets | 1.3.6.1.4.1.24350.2.19.2.3 | OCTET STRING | read-write | current |
| sysNetsInternalFlexipdefault OBJECT-TYPE override the .nets.internal.default for flexip | 1.3.6.1.4.1.24350.2.19.2.4 | OCTET STRING | read-write | current |
| sysOrganization OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.20 | |||
| sysOrganizationCity OBJECT-TYPE city or locality | 1.3.6.1.4.1.24350.2.20.1 | OCTET STRING | read-write | current |
| sysOrganizationCountry OBJECT-TYPE 2 letter country code | 1.3.6.1.4.1.24350.2.20.2 | OCTET STRING | read-write | current |
| sysOrganizationName OBJECT-TYPE organization name | 1.3.6.1.4.1.24350.2.20.3 | OCTET STRING | read-write | current |
| sysOrganizationState OBJECT-TYPE state or province | 1.3.6.1.4.1.24350.2.20.4 | OCTET STRING | read-write | current |
| sysPassword OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.21 | |||
| sysPasswordAdmin OBJECT-TYPE admin account password | 1.3.6.1.4.1.24350.2.21.1 | OCTET STRING | read-write | current |
| sysPasswordMonitor OBJECT-TYPE monitor account password | 1.3.6.1.4.1.24350.2.21.2 | OCTET STRING | read-write | current |
| sysPlatform OBJECT-TYPE hardware platform | 1.3.6.1.4.1.24350.2.22 | OCTET STRING | read-only | current |
| sysProvisioning OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.23 | |||
| sysProvisioningEnable OBJECT-TYPE enable OnRamp provisioning | 1.3.6.1.4.1.24350.2.23.1 | OCTET STRING | read-write | current |
| sysRouting OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.24 | |||
| sysRoutingOspf OBJECT-TYPE enable OSPF dynamic routing | 1.3.6.1.4.1.24350.2.24.1 | OCTET STRING | read-write | current |
| sysRoutingRip OBJECT-TYPE enable RIP dynamic routing | 1.3.6.1.4.1.24350.2.24.2 | OCTET STRING | read-write | current |
| sysScheme OBJECT-TYPE wireless node type | 1.3.6.1.4.1.24350.2.25 | OCTET STRING | read-write | current |
| sysShell OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.26 | |||
| sysShellTimeout OBJECT-TYPE shell inactivity timeout | 1.3.6.1.4.1.24350.2.26.1 | INTEGER | read-write | current |
| sysSnmp OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.27 | |||
| sysSnmpCommunity OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.27.1 | |||
| sysSnmpCommunityRo OBJECT-TYPE ro community password | 1.3.6.1.4.1.24350.2.27.1.1 | OCTET STRING | read-write | current |
| sysSnmpCommunityRw OBJECT-TYPE rw community password | 1.3.6.1.4.1.24350.2.27.1.2 | OCTET STRING | read-write | current |
| sysSnmpCommunityTrap OBJECT-TYPE trap community password | 1.3.6.1.4.1.24350.2.27.1.3 | OCTET STRING | read-write | current |
| sysSnmpContact OBJECT-TYPE snmp contact | 1.3.6.1.4.1.24350.2.27.2 | OCTET STRING | read-write | current |
| sysSnmpLocation OBJECT-TYPE location (taken from sys.location.postal) | 1.3.6.1.4.1.24350.2.27.3 | OCTET STRING | read-write | current |
| sysSnmpPort OBJECT-TYPE snmp port | 1.3.6.1.4.1.24350.2.27.4 | INTEGER | read-write | current |
| sysSnmpTrap OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.27.5 | |||
| sysSnmpTrapHost OBJECT-TYPE trap host (trapsink) | 1.3.6.1.4.1.24350.2.27.5.1 | OCTET STRING | read-write | current |
| sysSplash OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.28 | |||
| sysSplashAuth OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.28.1 | |||
| sysSplashAuthServer OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.28.1.1 | |||
| sysSplashAuthServerWlan1 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.28.1.1.1 | |||
| sysSplashAuthServerWlan1Enable OBJECT-TYPE require authentication | 1.3.6.1.4.1.24350.2.28.1.1.1.1 | OCTET STRING | read-write | current |
| sysSplashAuthServerWlan1Host OBJECT-TYPE host for remote radius authentication | 1.3.6.1.4.1.24350.2.28.1.1.1.2 | OCTET STRING | read-write | current |
| sysSplashAuthServerWlan1Port OBJECT-TYPE port for remote radius authentication | 1.3.6.1.4.1.24350.2.28.1.1.1.3 | INTEGER | read-write | current |
| sysSplashAuthServerWlan1Secret OBJECT-TYPE shared secret for remote radius authentication | 1.3.6.1.4.1.24350.2.28.1.1.1.4 | OCTET STRING | read-write | current |
| sysSplashAuthServerWlan2 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.28.1.1.2 | |||
| sysSplashAuthServerWlan2Enable OBJECT-TYPE require authentication | 1.3.6.1.4.1.24350.2.28.1.1.2.1 | OCTET STRING | read-write | current |
| sysSplashAuthServerWlan2Host OBJECT-TYPE host for remote radius authentication | 1.3.6.1.4.1.24350.2.28.1.1.2.2 | OCTET STRING | read-write | current |
| sysSplashAuthServerWlan2Port OBJECT-TYPE port for remote radius authentication | 1.3.6.1.4.1.24350.2.28.1.1.2.3 | INTEGER | read-write | current |
| sysSplashAuthServerWlan2Secret OBJECT-TYPE shared secret for remote radius authentication | 1.3.6.1.4.1.24350.2.28.1.1.2.4 | OCTET STRING | read-write | current |
| sysSplashAuthServerWlan3 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.28.1.1.3 | |||
| sysSplashAuthServerWlan3Enable OBJECT-TYPE require authentication | 1.3.6.1.4.1.24350.2.28.1.1.3.1 | OCTET STRING | read-write | current |
| sysSplashAuthServerWlan3Host OBJECT-TYPE host for remote radius authentication | 1.3.6.1.4.1.24350.2.28.1.1.3.2 | OCTET STRING | read-write | current |
| sysSplashAuthServerWlan3Port OBJECT-TYPE port for remote radius authentication | 1.3.6.1.4.1.24350.2.28.1.1.3.3 | INTEGER | read-write | current |
| sysSplashAuthServerWlan3Secret OBJECT-TYPE shared secret for remote radius authentication | 1.3.6.1.4.1.24350.2.28.1.1.3.4 | OCTET STRING | read-write | current |
| sysSplashAuthServerWlan4 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.28.1.1.4 | |||
| sysSplashAuthServerWlan4Enable OBJECT-TYPE require authentication | 1.3.6.1.4.1.24350.2.28.1.1.4.1 | OCTET STRING | read-write | current |
| sysSplashAuthServerWlan4Host OBJECT-TYPE host for remote radius authentication | 1.3.6.1.4.1.24350.2.28.1.1.4.2 | OCTET STRING | read-write | current |
| sysSplashAuthServerWlan4Port OBJECT-TYPE port for remote radius authentication | 1.3.6.1.4.1.24350.2.28.1.1.4.3 | INTEGER | read-write | current |
| sysSplashAuthServerWlan4Secret OBJECT-TYPE shared secret for remote radius authentication | 1.3.6.1.4.1.24350.2.28.1.1.4.4 | OCTET STRING | read-write | current |
| sysSplashBypasshosts OBJECT-TYPE comma separated list of hosts to bypass sign in | 1.3.6.1.4.1.24350.2.28.2 | OCTET STRING | read-write | current |
| sysSplashEnable OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.28.3 | |||
| sysSplashEnableWlan1 OBJECT-TYPE enable splash screen for wlan1 | 1.3.6.1.4.1.24350.2.28.3.1 | OCTET STRING | read-write | current |
| sysSplashEnableWlan2 OBJECT-TYPE enable splash screen for wlan2 | 1.3.6.1.4.1.24350.2.28.3.2 | OCTET STRING | read-write | current |
| sysSplashEnableWlan3 OBJECT-TYPE enable splash screen for wlan3 | 1.3.6.1.4.1.24350.2.28.3.3 | OCTET STRING | read-write | current |
| sysSplashEnableWlan4 OBJECT-TYPE enable splash screen for wlan4 | 1.3.6.1.4.1.24350.2.28.3.4 | OCTET STRING | read-write | current |
| sysSplashExternal OBJECT-TYPE external network device, set by sys.scheme | 1.3.6.1.4.1.24350.2.28.4 | OCTET STRING | read-write | current |
| sysSplashInternal OBJECT-TYPE internal network devices, set by sys.scheme | 1.3.6.1.4.1.24350.2.28.5 | OCTET STRING | read-only | current |
| sysSplashTrustedmacs OBJECT-TYPE comma separated list of mac addresses than can pass | 1.3.6.1.4.1.24350.2.28.6 | OCTET STRING | read-write | current |
| sysSplashUrl OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.28.7 | |||
| sysSplashUrlWlan1 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.28.7.1 | |||
| sysSplashUrlWlan1Error OBJECT-TYPE full url to page shown on login (internal) error | 1.3.6.1.4.1.24350.2.28.7.1.1 | OCTET STRING | read-write | current |
| sysSplashUrlWlan1Fail OBJECT-TYPE full url to page shown on failed login | 1.3.6.1.4.1.24350.2.28.7.1.2 | OCTET STRING | read-write | current |
| sysSplashUrlWlan1Login OBJECT-TYPE full url to desired login page | 1.3.6.1.4.1.24350.2.28.7.1.3 | OCTET STRING | read-write | current |
| sysSplashUrlWlan1Success OBJECT-TYPE full url to page shown on successful login | 1.3.6.1.4.1.24350.2.28.7.1.4 | OCTET STRING | read-write | current |
| sysSplashUrlWlan2 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.28.7.2 | |||
| sysSplashUrlWlan2Error OBJECT-TYPE full url to page shown on login (internal) error | 1.3.6.1.4.1.24350.2.28.7.2.1 | OCTET STRING | read-write | current |
| sysSplashUrlWlan2Fail OBJECT-TYPE full url to page shown on failed login | 1.3.6.1.4.1.24350.2.28.7.2.2 | OCTET STRING | read-write | current |
| sysSplashUrlWlan2Login OBJECT-TYPE full url to desired login page | 1.3.6.1.4.1.24350.2.28.7.2.3 | OCTET STRING | read-write | current |
| sysSplashUrlWlan2Success OBJECT-TYPE full url to page shown on successful login | 1.3.6.1.4.1.24350.2.28.7.2.4 | OCTET STRING | read-write | current |
| sysSplashUrlWlan3 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.28.7.3 | |||
| sysSplashUrlWlan3Error OBJECT-TYPE full url to page shown on login (internal) error | 1.3.6.1.4.1.24350.2.28.7.3.1 | OCTET STRING | read-write | current |
| sysSplashUrlWlan3Fail OBJECT-TYPE full url to page shown on failed login | 1.3.6.1.4.1.24350.2.28.7.3.2 | OCTET STRING | read-write | current |
| sysSplashUrlWlan3Login OBJECT-TYPE full url to desired login page | 1.3.6.1.4.1.24350.2.28.7.3.3 | OCTET STRING | read-write | current |
| sysSplashUrlWlan3Success OBJECT-TYPE full url to page shown on successful login | 1.3.6.1.4.1.24350.2.28.7.3.4 | OCTET STRING | read-write | current |
| sysSplashUrlWlan4 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.28.7.4 | |||
| sysSplashUrlWlan4Error OBJECT-TYPE full url to page shown on login (internal) error | 1.3.6.1.4.1.24350.2.28.7.4.1 | OCTET STRING | read-write | current |
| sysSplashUrlWlan4Fail OBJECT-TYPE full url to page shown on failed login | 1.3.6.1.4.1.24350.2.28.7.4.2 | OCTET STRING | read-write | current |
| sysSplashUrlWlan4Login OBJECT-TYPE full url to desired login page | 1.3.6.1.4.1.24350.2.28.7.4.3 | OCTET STRING | read-write | current |
| sysSplashUrlWlan4Success OBJECT-TYPE full url to page shown on successful login | 1.3.6.1.4.1.24350.2.28.7.4.4 | OCTET STRING | read-write | current |
| sysTime OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.29 | |||
| sysTimeRfc868 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.2.29.1 | |||
| sysTimeRfc868Server OBJECT-TYPE RFC868 time server name or address for gateway nodes | 1.3.6.1.4.1.24350.2.29.1.1 | OCTET STRING | read-write | current |
| sysTimeSyncdelay OBJECT-TYPE how many seconds repeaters should delay syncing to gateway | 1.3.6.1.4.1.24350.2.29.2 | INTEGER | read-write | current |
| sysUnits OBJECT-TYPE imperial (feet) or metric (meters) | 1.3.6.1.4.1.24350.2.30 | OCTET STRING | read-write | current |
| firewall OBJECT-IDENTITY | 1.3.6.1.4.1.24350.3 | |||
| firewallConntrack OBJECT-IDENTITY | 1.3.6.1.4.1.24350.3.1 | |||
| firewallConntrackConnlimit OBJECT-IDENTITY | 1.3.6.1.4.1.24350.3.1.1 | |||
| firewallConntrackConnlimitConnections OBJECT-TYPE number of connections allowed per client | 1.3.6.1.4.1.24350.3.1.1.1 | INTEGER | read-write | current |
| firewallConntrackConnlimitEnable OBJECT-TYPE limit the number of tcp connections per client | 1.3.6.1.4.1.24350.3.1.1.2 | OCTET STRING | read-write | current |
| firewallConntrackTablesize OBJECT-TYPE size of connection tracking table | 1.3.6.1.4.1.24350.3.1.2 | INTEGER | read-write | current |
| firewallConntrackTcptimeoutestablished OBJECT-TYPE tcp connections completely idle this many seconds can be dropped | 1.3.6.1.4.1.24350.3.1.3 | INTEGER | read-write | current |
| firewallGateway OBJECT-IDENTITY | 1.3.6.1.4.1.24350.3.2 | |||
| firewallGatewayEnable OBJECT-TYPE prevent incoming connections past gateway node | 1.3.6.1.4.1.24350.3.2.1 | OCTET STRING | read-write | current |
| firewallNode OBJECT-IDENTITY | 1.3.6.1.4.1.24350.3.3 | |||
| firewallNodeAllowc2c OBJECT-IDENTITY | 1.3.6.1.4.1.24350.3.3.1 | |||
| firewallNodeAllowc2cEth0 OBJECT-TYPE allow clients to see each other if eth0.role=access | 1.3.6.1.4.1.24350.3.3.1.1 | OCTET STRING | read-write | current |
| firewallNodeAllowc2cWlan1 OBJECT-TYPE allow clients to see each other if wlan1.role=access | 1.3.6.1.4.1.24350.3.3.1.2 | OCTET STRING | read-write | current |
| firewallNodeAllowc2cWlan2 OBJECT-TYPE allow clients to see each other if wlan2.role=access | 1.3.6.1.4.1.24350.3.3.1.3 | OCTET STRING | read-write | current |
| firewallNodeAllowc2cWlan3 OBJECT-TYPE allow clients to see each other if wlan3.role=access | 1.3.6.1.4.1.24350.3.3.1.4 | OCTET STRING | read-write | current |
| firewallNodeAllowc2cWlan4 OBJECT-TYPE allow clients to see each other if wlan4.role=access | 1.3.6.1.4.1.24350.3.3.1.5 | OCTET STRING | read-write | current |
| firewallNodeEnable OBJECT-TYPE enable firewall on the node | 1.3.6.1.4.1.24350.3.3.2 | OCTET STRING | read-write | current |
| firewallNodeTcp OBJECT-IDENTITY | 1.3.6.1.4.1.24350.3.3.3 | |||
| firewallNodeTcpAllow OBJECT-IDENTITY | 1.3.6.1.4.1.24350.3.3.3.1 | |||
| firewallNodeTcpAllowDest OBJECT-TYPE tcp dest ports (space separated) to allow to this node | 1.3.6.1.4.1.24350.3.3.3.1.1 | OCTET STRING | read-write | current |
| firewallNodeTcpAllowSource OBJECT-TYPE tcp source ports (space separated) to allow to this node | 1.3.6.1.4.1.24350.3.3.3.1.2 | OCTET STRING | read-write | current |
| firewallNodeUdp OBJECT-IDENTITY | 1.3.6.1.4.1.24350.3.3.4 | |||
| firewallNodeUdpAllow OBJECT-IDENTITY | 1.3.6.1.4.1.24350.3.3.4.1 | |||
| firewallNodeUdpAllowDest OBJECT-TYPE udp dest ports (space separated) to allow to this node | 1.3.6.1.4.1.24350.3.3.4.1.1 | OCTET STRING | read-write | current |
| firewallNodeUdpAllowSource OBJECT-TYPE udp source ports (space separated) to allow to this node | 1.3.6.1.4.1.24350.3.3.4.1.2 | OCTET STRING | read-write | current |
| qos OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4 | |||
| qosEnable OBJECT-TYPE qos enabled? if not, nothing else here matters. | 1.3.6.1.4.1.24350.4.1 | OCTET STRING | read-write | current |
| qosExtra OBJECT-TYPE space separated list of extra <key>=<limit> qos values | 1.3.6.1.4.1.24350.4.2 | OCTET STRING | read-write | current |
| qosIn OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.3 | |||
| qosInDefault OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.3.1 | |||
| qosInDefaultFlowpriority OBJECT-TYPE input flow priority 0-99 or 'inherit' (higher is higher priority) | 1.3.6.1.4.1.24350.4.3.1.1 | OCTET STRING | read-write | current |
| qosInDefaultHwpri OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.3.1.2 | |||
| qosInDefaultHwpriMax OBJECT-TYPE max hardware priority on output (1-4, 0 for default, or 'inherit') | 1.3.6.1.4.1.24350.4.3.1.2.1 | OCTET STRING | read-write | current |
| qosInDefaultHwpriMin OBJECT-TYPE min hardware priority on output (1-4, 0 for default, or 'inherit') | 1.3.6.1.4.1.24350.4.3.1.2.2 | OCTET STRING | read-write | current |
| qosInEth0 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.3.2 | |||
| qosInEth0Flowpriority OBJECT-TYPE input flow priority 0-99 or 'inherit' (higher is higher priority) | 1.3.6.1.4.1.24350.4.3.2.1 | OCTET STRING | read-write | current |
| qosInEth0Hwpri OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.3.2.2 | |||
| qosInEth0HwpriMax OBJECT-TYPE max hardware priority on output (1-4, 0 for default, or 'inherit') | 1.3.6.1.4.1.24350.4.3.2.2.1 | OCTET STRING | read-write | current |
| qosInEth0HwpriMin OBJECT-TYPE min hardware priority on output (1-4, 0 for default, or 'inherit') | 1.3.6.1.4.1.24350.4.3.2.2.2 | OCTET STRING | read-write | current |
| qosInLocal OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.3.3 | |||
| qosInLocalFlowpriority OBJECT-TYPE input flow priority 0-99 or 'inherit' (higher is higher priority) | 1.3.6.1.4.1.24350.4.3.3.1 | OCTET STRING | read-write | current |
| qosInLocalHwpri OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.3.3.2 | |||
| qosInLocalHwpriMax OBJECT-TYPE max hardware priority on output (1-4, 0 for default, or 'inherit') | 1.3.6.1.4.1.24350.4.3.3.2.1 | OCTET STRING | read-write | current |
| qosInLocalHwpriMin OBJECT-TYPE min hardware priority on output (1-4, 0 for default, or 'inherit') | 1.3.6.1.4.1.24350.4.3.3.2.2 | OCTET STRING | read-write | current |
| qosInWlan0 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.3.4 | |||
| qosInWlan0Flowpriority OBJECT-TYPE input flow priority 0-99 or 'inherit' (higher is higher priority) | 1.3.6.1.4.1.24350.4.3.4.1 | OCTET STRING | read-write | current |
| qosInWlan0Hwpri OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.3.4.2 | |||
| qosInWlan0HwpriMax OBJECT-TYPE max hardware priority on output (1-4, 0 for default, or 'inherit') | 1.3.6.1.4.1.24350.4.3.4.2.1 | OCTET STRING | read-write | current |
| qosInWlan0HwpriMin OBJECT-TYPE min hardware priority on output (1-4, 0 for default, or 'inherit') | 1.3.6.1.4.1.24350.4.3.4.2.2 | OCTET STRING | read-write | current |
| qosInWlan1 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.3.5 | |||
| qosInWlan1Flowpriority OBJECT-TYPE input flow priority 0-99 or 'inherit' (higher is higher priority) | 1.3.6.1.4.1.24350.4.3.5.1 | OCTET STRING | read-write | current |
| qosInWlan1Hwpri OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.3.5.2 | |||
| qosInWlan1HwpriMax OBJECT-TYPE max hardware priority on output (1-4, 0 for default, or 'inherit') | 1.3.6.1.4.1.24350.4.3.5.2.1 | OCTET STRING | read-write | current |
| qosInWlan1HwpriMin OBJECT-TYPE min hardware priority on output (1-4, 0 for default, or 'inherit') | 1.3.6.1.4.1.24350.4.3.5.2.2 | OCTET STRING | read-write | current |
| qosInWlan2 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.3.6 | |||
| qosInWlan2Flowpriority OBJECT-TYPE input flow priority 0-99 or 'inherit' (higher is higher priority) | 1.3.6.1.4.1.24350.4.3.6.1 | OCTET STRING | read-write | current |
| qosInWlan2Hwpri OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.3.6.2 | |||
| qosInWlan2HwpriMax OBJECT-TYPE max hardware priority on output (1-4, 0 for default, or 'inherit') | 1.3.6.1.4.1.24350.4.3.6.2.1 | OCTET STRING | read-write | current |
| qosInWlan2HwpriMin OBJECT-TYPE min hardware priority on output (1-4, 0 for default, or 'inherit') | 1.3.6.1.4.1.24350.4.3.6.2.2 | OCTET STRING | read-write | current |
| qosInWlan3 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.3.7 | |||
| qosInWlan3Flowpriority OBJECT-TYPE input flow priority 0-99 or 'inherit' (higher is higher priority) | 1.3.6.1.4.1.24350.4.3.7.1 | OCTET STRING | read-write | current |
| qosInWlan3Hwpri OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.3.7.2 | |||
| qosInWlan3HwpriMax OBJECT-TYPE max hardware priority on output (1-4, 0 for default, or 'inherit') | 1.3.6.1.4.1.24350.4.3.7.2.1 | OCTET STRING | read-write | current |
| qosInWlan3HwpriMin OBJECT-TYPE min hardware priority on output (1-4, 0 for default, or 'inherit') | 1.3.6.1.4.1.24350.4.3.7.2.2 | OCTET STRING | read-write | current |
| qosInWlan4 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.3.8 | |||
| qosInWlan4Flowpriority OBJECT-TYPE input flow priority 0-99 or 'inherit' (higher is higher priority) | 1.3.6.1.4.1.24350.4.3.8.1 | OCTET STRING | read-write | current |
| qosInWlan4Hwpri OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.3.8.2 | |||
| qosInWlan4HwpriMax OBJECT-TYPE max hardware priority on output (1-4, 0 for default, or 'inherit') | 1.3.6.1.4.1.24350.4.3.8.2.1 | OCTET STRING | read-write | current |
| qosInWlan4HwpriMin OBJECT-TYPE min hardware priority on output (1-4, 0 for default, or 'inherit') | 1.3.6.1.4.1.24350.4.3.8.2.2 | OCTET STRING | read-write | current |
| qosOut OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4 | |||
| qosOutDefault OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.1 | |||
| qosOutDefaultDefault OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.1.1 | |||
| qosOutDefaultDefaultLimit OBJECT-TYPE max bw for all data coming from default | 1.3.6.1.4.1.24350.4.4.1.1.1 | OCTET STRING | read-write | current |
| qosOutDefaultDefaultReserve OBJECT-TYPE reserved bw for all data coming from default | 1.3.6.1.4.1.24350.4.4.1.1.2 | OCTET STRING | read-write | current |
| qosOutDefaultEth0 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.1.2 | |||
| qosOutDefaultEth0Limit OBJECT-TYPE max bw for all data coming from eth0 | 1.3.6.1.4.1.24350.4.4.1.2.1 | OCTET STRING | read-write | current |
| qosOutDefaultEth0Reserve OBJECT-TYPE reserved bw for all data coming from eth0 | 1.3.6.1.4.1.24350.4.4.1.2.2 | OCTET STRING | read-write | current |
| qosOutDefaultLimit OBJECT-TYPE limit total output rate. *if blank, no other rates are used* | 1.3.6.1.4.1.24350.4.4.1.3 | OCTET STRING | read-write | current |
| qosOutDefaultLocal OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.1.4 | |||
| qosOutDefaultLocalLimit OBJECT-TYPE max bw for all data coming from local | 1.3.6.1.4.1.24350.4.4.1.4.1 | OCTET STRING | read-write | current |
| qosOutDefaultLocalReserve OBJECT-TYPE reserved bw for all data coming from local | 1.3.6.1.4.1.24350.4.4.1.4.2 | OCTET STRING | read-write | current |
| qosOutDefaultWlan0 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.1.5 | |||
| qosOutDefaultWlan0Limit OBJECT-TYPE max bw for all data coming from wlan0 | 1.3.6.1.4.1.24350.4.4.1.5.1 | OCTET STRING | read-write | current |
| qosOutDefaultWlan0Reserve OBJECT-TYPE reserved bw for all data coming from wlan0 | 1.3.6.1.4.1.24350.4.4.1.5.2 | OCTET STRING | read-write | current |
| qosOutDefaultWlan1 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.1.6 | |||
| qosOutDefaultWlan1Limit OBJECT-TYPE max bw for all data coming from wlan1 | 1.3.6.1.4.1.24350.4.4.1.6.1 | OCTET STRING | read-write | current |
| qosOutDefaultWlan1Reserve OBJECT-TYPE reserved bw for all data coming from wlan1 | 1.3.6.1.4.1.24350.4.4.1.6.2 | OCTET STRING | read-write | current |
| qosOutDefaultWlan2 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.1.7 | |||
| qosOutDefaultWlan2Limit OBJECT-TYPE max bw for all data coming from wlan2 | 1.3.6.1.4.1.24350.4.4.1.7.1 | OCTET STRING | read-write | current |
| qosOutDefaultWlan2Reserve OBJECT-TYPE reserved bw for all data coming from wlan2 | 1.3.6.1.4.1.24350.4.4.1.7.2 | OCTET STRING | read-write | current |
| qosOutDefaultWlan3 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.1.8 | |||
| qosOutDefaultWlan3Limit OBJECT-TYPE max bw for all data coming from wlan3 | 1.3.6.1.4.1.24350.4.4.1.8.1 | OCTET STRING | read-write | current |
| qosOutDefaultWlan3Reserve OBJECT-TYPE reserved bw for all data coming from wlan3 | 1.3.6.1.4.1.24350.4.4.1.8.2 | OCTET STRING | read-write | current |
| qosOutDefaultWlan4 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.1.9 | |||
| qosOutDefaultWlan4Limit OBJECT-TYPE max bw for all data coming from wlan4 | 1.3.6.1.4.1.24350.4.4.1.9.1 | OCTET STRING | read-write | current |
| qosOutDefaultWlan4Reserve OBJECT-TYPE reserved bw for all data coming from wlan4 | 1.3.6.1.4.1.24350.4.4.1.9.2 | OCTET STRING | read-write | current |
| qosOutWlan0 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2 | |||
| qosOutWlan0Default OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.1 | |||
| qosOutWlan0DefaultBe OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.1.1 | |||
| qosOutWlan0DefaultBeLimit OBJECT-TYPE max bw for BE data coming from default | 1.3.6.1.4.1.24350.4.4.2.1.1.1 | OCTET STRING | read-write | current |
| qosOutWlan0DefaultBeReserve OBJECT-TYPE reserved bw for BE data coming from default | 1.3.6.1.4.1.24350.4.4.2.1.1.2 | OCTET STRING | read-write | current |
| qosOutWlan0DefaultBk OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.1.2 | |||
| qosOutWlan0DefaultBkLimit OBJECT-TYPE max bw for BK data coming from default | 1.3.6.1.4.1.24350.4.4.2.1.2.1 | OCTET STRING | read-write | current |
| qosOutWlan0DefaultBkReserve OBJECT-TYPE reserved bw for BK data coming from default | 1.3.6.1.4.1.24350.4.4.2.1.2.2 | OCTET STRING | read-write | current |
| qosOutWlan0DefaultLimit OBJECT-TYPE max bw for all data coming from default | 1.3.6.1.4.1.24350.4.4.2.1.3 | OCTET STRING | read-write | current |
| qosOutWlan0DefaultReserve OBJECT-TYPE reserved bw for all data coming from default | 1.3.6.1.4.1.24350.4.4.2.1.4 | OCTET STRING | read-write | current |
| qosOutWlan0DefaultVi OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.1.5 | |||
| qosOutWlan0DefaultViLimit OBJECT-TYPE max bw for VI data coming from default | 1.3.6.1.4.1.24350.4.4.2.1.5.1 | OCTET STRING | read-write | current |
| qosOutWlan0DefaultViReserve OBJECT-TYPE reserved bw for VI data coming from default | 1.3.6.1.4.1.24350.4.4.2.1.5.2 | OCTET STRING | read-write | current |
| qosOutWlan0DefaultVo OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.1.6 | |||
| qosOutWlan0DefaultVoLimit OBJECT-TYPE max bw for VO data coming from default | 1.3.6.1.4.1.24350.4.4.2.1.6.1 | OCTET STRING | read-write | current |
| qosOutWlan0DefaultVoReserve OBJECT-TYPE reserved bw for VO data coming from default | 1.3.6.1.4.1.24350.4.4.2.1.6.2 | OCTET STRING | read-write | current |
| qosOutWlan0Eth0 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.2 | |||
| qosOutWlan0Eth0Be OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.2.1 | |||
| qosOutWlan0Eth0BeLimit OBJECT-TYPE max bw for BE data coming from eth0 | 1.3.6.1.4.1.24350.4.4.2.2.1.1 | OCTET STRING | read-write | current |
| qosOutWlan0Eth0BeReserve OBJECT-TYPE reserved bw for BE data coming from eth0 | 1.3.6.1.4.1.24350.4.4.2.2.1.2 | OCTET STRING | read-write | current |
| qosOutWlan0Eth0Bk OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.2.2 | |||
| qosOutWlan0Eth0BkLimit OBJECT-TYPE max bw for BK data coming from eth0 | 1.3.6.1.4.1.24350.4.4.2.2.2.1 | OCTET STRING | read-write | current |
| qosOutWlan0Eth0BkReserve OBJECT-TYPE reserved bw for BK data coming from eth0 | 1.3.6.1.4.1.24350.4.4.2.2.2.2 | OCTET STRING | read-write | current |
| qosOutWlan0Eth0Limit OBJECT-TYPE max bw for all data coming from eth0 | 1.3.6.1.4.1.24350.4.4.2.2.3 | OCTET STRING | read-write | current |
| qosOutWlan0Eth0Reserve OBJECT-TYPE reserved bw for all data coming from eth0 | 1.3.6.1.4.1.24350.4.4.2.2.4 | OCTET STRING | read-write | current |
| qosOutWlan0Eth0Vi OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.2.5 | |||
| qosOutWlan0Eth0ViLimit OBJECT-TYPE max bw for VI data coming from eth0 | 1.3.6.1.4.1.24350.4.4.2.2.5.1 | OCTET STRING | read-write | current |
| qosOutWlan0Eth0ViReserve OBJECT-TYPE reserved bw for VI data coming from eth0 | 1.3.6.1.4.1.24350.4.4.2.2.5.2 | OCTET STRING | read-write | current |
| qosOutWlan0Eth0Vo OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.2.6 | |||
| qosOutWlan0Eth0VoLimit OBJECT-TYPE max bw for VO data coming from eth0 | 1.3.6.1.4.1.24350.4.4.2.2.6.1 | OCTET STRING | read-write | current |
| qosOutWlan0Eth0VoReserve OBJECT-TYPE reserved bw for VO data coming from eth0 | 1.3.6.1.4.1.24350.4.4.2.2.6.2 | OCTET STRING | read-write | current |
| qosOutWlan0Limit OBJECT-TYPE limit total output rate. *if blank, no other rates are used* | 1.3.6.1.4.1.24350.4.4.2.3 | OCTET STRING | read-write | current |
| qosOutWlan0Local OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.4 | |||
| qosOutWlan0LocalBe OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.4.1 | |||
| qosOutWlan0LocalBeLimit OBJECT-TYPE max bw for BE data coming from local | 1.3.6.1.4.1.24350.4.4.2.4.1.1 | OCTET STRING | read-write | current |
| qosOutWlan0LocalBeReserve OBJECT-TYPE reserved bw for BE data coming from local | 1.3.6.1.4.1.24350.4.4.2.4.1.2 | OCTET STRING | read-write | current |
| qosOutWlan0LocalBk OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.4.2 | |||
| qosOutWlan0LocalBkLimit OBJECT-TYPE max bw for BK data coming from local | 1.3.6.1.4.1.24350.4.4.2.4.2.1 | OCTET STRING | read-write | current |
| qosOutWlan0LocalBkReserve OBJECT-TYPE reserved bw for BK data coming from local | 1.3.6.1.4.1.24350.4.4.2.4.2.2 | OCTET STRING | read-write | current |
| qosOutWlan0LocalLimit OBJECT-TYPE max bw for all data coming from local | 1.3.6.1.4.1.24350.4.4.2.4.3 | OCTET STRING | read-write | current |
| qosOutWlan0LocalReserve OBJECT-TYPE reserved bw for all data coming from local | 1.3.6.1.4.1.24350.4.4.2.4.4 | OCTET STRING | read-write | current |
| qosOutWlan0LocalVi OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.4.5 | |||
| qosOutWlan0LocalViLimit OBJECT-TYPE max bw for VI data coming from local | 1.3.6.1.4.1.24350.4.4.2.4.5.1 | OCTET STRING | read-write | current |
| qosOutWlan0LocalViReserve OBJECT-TYPE reserved bw for VI data coming from local | 1.3.6.1.4.1.24350.4.4.2.4.5.2 | OCTET STRING | read-write | current |
| qosOutWlan0LocalVo OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.4.6 | |||
| qosOutWlan0LocalVoLimit OBJECT-TYPE max bw for VO data coming from local | 1.3.6.1.4.1.24350.4.4.2.4.6.1 | OCTET STRING | read-write | current |
| qosOutWlan0LocalVoReserve OBJECT-TYPE reserved bw for VO data coming from local | 1.3.6.1.4.1.24350.4.4.2.4.6.2 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan0 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.5 | |||
| qosOutWlan0Wlan0Be OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.5.1 | |||
| qosOutWlan0Wlan0BeLimit OBJECT-TYPE max bw for BE data coming from wlan0 | 1.3.6.1.4.1.24350.4.4.2.5.1.1 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan0BeReserve OBJECT-TYPE reserved bw for BE data coming from wlan0 | 1.3.6.1.4.1.24350.4.4.2.5.1.2 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan0Bk OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.5.2 | |||
| qosOutWlan0Wlan0BkLimit OBJECT-TYPE max bw for BK data coming from wlan0 | 1.3.6.1.4.1.24350.4.4.2.5.2.1 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan0BkReserve OBJECT-TYPE reserved bw for BK data coming from wlan0 | 1.3.6.1.4.1.24350.4.4.2.5.2.2 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan0Limit OBJECT-TYPE max bw for all data coming from wlan0 | 1.3.6.1.4.1.24350.4.4.2.5.3 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan0Reserve OBJECT-TYPE reserved bw for all data coming from wlan0 | 1.3.6.1.4.1.24350.4.4.2.5.4 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan0Vi OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.5.5 | |||
| qosOutWlan0Wlan0ViLimit OBJECT-TYPE max bw for VI data coming from wlan0 | 1.3.6.1.4.1.24350.4.4.2.5.5.1 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan0ViReserve OBJECT-TYPE reserved bw for VI data coming from wlan0 | 1.3.6.1.4.1.24350.4.4.2.5.5.2 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan0Vo OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.5.6 | |||
| qosOutWlan0Wlan0VoLimit OBJECT-TYPE max bw for VO data coming from wlan0 | 1.3.6.1.4.1.24350.4.4.2.5.6.1 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan0VoReserve OBJECT-TYPE reserved bw for VO data coming from wlan0 | 1.3.6.1.4.1.24350.4.4.2.5.6.2 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan1 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.6 | |||
| qosOutWlan0Wlan1Be OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.6.1 | |||
| qosOutWlan0Wlan1BeLimit OBJECT-TYPE max bw for BE data coming from wlan1 | 1.3.6.1.4.1.24350.4.4.2.6.1.1 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan1BeReserve OBJECT-TYPE reserved bw for BE data coming from wlan1 | 1.3.6.1.4.1.24350.4.4.2.6.1.2 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan1Bk OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.6.2 | |||
| qosOutWlan0Wlan1BkLimit OBJECT-TYPE max bw for BK data coming from wlan1 | 1.3.6.1.4.1.24350.4.4.2.6.2.1 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan1BkReserve OBJECT-TYPE reserved bw for BK data coming from wlan1 | 1.3.6.1.4.1.24350.4.4.2.6.2.2 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan1Limit OBJECT-TYPE max bw for all data coming from wlan1 | 1.3.6.1.4.1.24350.4.4.2.6.3 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan1Reserve OBJECT-TYPE reserved bw for all data coming from wlan1 | 1.3.6.1.4.1.24350.4.4.2.6.4 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan1Vi OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.6.5 | |||
| qosOutWlan0Wlan1ViLimit OBJECT-TYPE max bw for VI data coming from wlan1 | 1.3.6.1.4.1.24350.4.4.2.6.5.1 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan1ViReserve OBJECT-TYPE reserved bw for VI data coming from wlan1 | 1.3.6.1.4.1.24350.4.4.2.6.5.2 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan1Vo OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.6.6 | |||
| qosOutWlan0Wlan1VoLimit OBJECT-TYPE max bw for VO data coming from wlan1 | 1.3.6.1.4.1.24350.4.4.2.6.6.1 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan1VoReserve OBJECT-TYPE reserved bw for VO data coming from wlan1 | 1.3.6.1.4.1.24350.4.4.2.6.6.2 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan2 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.7 | |||
| qosOutWlan0Wlan2Be OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.7.1 | |||
| qosOutWlan0Wlan2BeLimit OBJECT-TYPE max bw for BE data coming from wlan2 | 1.3.6.1.4.1.24350.4.4.2.7.1.1 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan2BeReserve OBJECT-TYPE reserved bw for BE data coming from wlan2 | 1.3.6.1.4.1.24350.4.4.2.7.1.2 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan2Bk OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.7.2 | |||
| qosOutWlan0Wlan2BkLimit OBJECT-TYPE max bw for BK data coming from wlan2 | 1.3.6.1.4.1.24350.4.4.2.7.2.1 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan2BkReserve OBJECT-TYPE reserved bw for BK data coming from wlan2 | 1.3.6.1.4.1.24350.4.4.2.7.2.2 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan2Limit OBJECT-TYPE max bw for all data coming from wlan2 | 1.3.6.1.4.1.24350.4.4.2.7.3 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan2Reserve OBJECT-TYPE reserved bw for all data coming from wlan2 | 1.3.6.1.4.1.24350.4.4.2.7.4 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan2Vi OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.7.5 | |||
| qosOutWlan0Wlan2ViLimit OBJECT-TYPE max bw for VI data coming from wlan2 | 1.3.6.1.4.1.24350.4.4.2.7.5.1 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan2ViReserve OBJECT-TYPE reserved bw for VI data coming from wlan2 | 1.3.6.1.4.1.24350.4.4.2.7.5.2 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan2Vo OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.7.6 | |||
| qosOutWlan0Wlan2VoLimit OBJECT-TYPE max bw for VO data coming from wlan2 | 1.3.6.1.4.1.24350.4.4.2.7.6.1 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan2VoReserve OBJECT-TYPE reserved bw for VO data coming from wlan2 | 1.3.6.1.4.1.24350.4.4.2.7.6.2 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan3 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.8 | |||
| qosOutWlan0Wlan3Be OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.8.1 | |||
| qosOutWlan0Wlan3BeLimit OBJECT-TYPE max bw for BE data coming from wlan3 | 1.3.6.1.4.1.24350.4.4.2.8.1.1 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan3BeReserve OBJECT-TYPE reserved bw for BE data coming from wlan3 | 1.3.6.1.4.1.24350.4.4.2.8.1.2 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan3Bk OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.8.2 | |||
| qosOutWlan0Wlan3BkLimit OBJECT-TYPE max bw for BK data coming from wlan3 | 1.3.6.1.4.1.24350.4.4.2.8.2.1 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan3BkReserve OBJECT-TYPE reserved bw for BK data coming from wlan3 | 1.3.6.1.4.1.24350.4.4.2.8.2.2 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan3Limit OBJECT-TYPE max bw for all data coming from wlan3 | 1.3.6.1.4.1.24350.4.4.2.8.3 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan3Reserve OBJECT-TYPE reserved bw for all data coming from wlan3 | 1.3.6.1.4.1.24350.4.4.2.8.4 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan3Vi OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.8.5 | |||
| qosOutWlan0Wlan3ViLimit OBJECT-TYPE max bw for VI data coming from wlan3 | 1.3.6.1.4.1.24350.4.4.2.8.5.1 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan3ViReserve OBJECT-TYPE reserved bw for VI data coming from wlan3 | 1.3.6.1.4.1.24350.4.4.2.8.5.2 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan3Vo OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.8.6 | |||
| qosOutWlan0Wlan3VoLimit OBJECT-TYPE max bw for VO data coming from wlan3 | 1.3.6.1.4.1.24350.4.4.2.8.6.1 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan3VoReserve OBJECT-TYPE reserved bw for VO data coming from wlan3 | 1.3.6.1.4.1.24350.4.4.2.8.6.2 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan4 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.9 | |||
| qosOutWlan0Wlan4Be OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.9.1 | |||
| qosOutWlan0Wlan4BeLimit OBJECT-TYPE max bw for BE data coming from wlan4 | 1.3.6.1.4.1.24350.4.4.2.9.1.1 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan4BeReserve OBJECT-TYPE reserved bw for BE data coming from wlan4 | 1.3.6.1.4.1.24350.4.4.2.9.1.2 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan4Bk OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.9.2 | |||
| qosOutWlan0Wlan4BkLimit OBJECT-TYPE max bw for BK data coming from wlan4 | 1.3.6.1.4.1.24350.4.4.2.9.2.1 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan4BkReserve OBJECT-TYPE reserved bw for BK data coming from wlan4 | 1.3.6.1.4.1.24350.4.4.2.9.2.2 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan4Limit OBJECT-TYPE max bw for all data coming from wlan4 | 1.3.6.1.4.1.24350.4.4.2.9.3 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan4Reserve OBJECT-TYPE reserved bw for all data coming from wlan4 | 1.3.6.1.4.1.24350.4.4.2.9.4 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan4Vi OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.9.5 | |||
| qosOutWlan0Wlan4ViLimit OBJECT-TYPE max bw for VI data coming from wlan4 | 1.3.6.1.4.1.24350.4.4.2.9.5.1 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan4ViReserve OBJECT-TYPE reserved bw for VI data coming from wlan4 | 1.3.6.1.4.1.24350.4.4.2.9.5.2 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan4Vo OBJECT-IDENTITY | 1.3.6.1.4.1.24350.4.4.2.9.6 | |||
| qosOutWlan0Wlan4VoLimit OBJECT-TYPE max bw for VO data coming from wlan4 | 1.3.6.1.4.1.24350.4.4.2.9.6.1 | OCTET STRING | read-write | current |
| qosOutWlan0Wlan4VoReserve OBJECT-TYPE reserved bw for VO data coming from wlan4 | 1.3.6.1.4.1.24350.4.4.2.9.6.2 | OCTET STRING | read-write | current |
| logs OBJECT-IDENTITY | 1.3.6.1.4.1.24350.5 | |||
| logsMconfd OBJECT-IDENTITY | 1.3.6.1.4.1.24350.5.1 | |||
| logsMconfdFiles OBJECT-TYPE number of old files kept | 1.3.6.1.4.1.24350.5.1.1 | INTEGER | read-write | current |
| logsMconfdSize OBJECT-TYPE maximum file size in bytes | 1.3.6.1.4.1.24350.5.1.2 | OCTET STRING | read-write | current |
| logsSecure OBJECT-IDENTITY | 1.3.6.1.4.1.24350.5.2 | |||
| logsSecureFiles OBJECT-TYPE number of old files kept | 1.3.6.1.4.1.24350.5.2.1 | INTEGER | read-write | current |
| logsSecureSize OBJECT-TYPE maximum file size in bytes | 1.3.6.1.4.1.24350.5.2.2 | OCTET STRING | read-write | current |
| logsSnmp OBJECT-IDENTITY | 1.3.6.1.4.1.24350.5.3 | |||
| logsSnmpFiles OBJECT-TYPE number of old files kept | 1.3.6.1.4.1.24350.5.3.1 | INTEGER | read-write | current |
| logsSnmpSize OBJECT-TYPE maximum file size in bytes | 1.3.6.1.4.1.24350.5.3.2 | OCTET STRING | read-write | current |
| logsSyslog OBJECT-IDENTITY | 1.3.6.1.4.1.24350.5.4 | |||
| logsSyslogFiles OBJECT-TYPE number of old files kept | 1.3.6.1.4.1.24350.5.4.1 | INTEGER | read-write | current |
| logsSyslogSize OBJECT-TYPE maximum file size in bytes | 1.3.6.1.4.1.24350.5.4.2 | OCTET STRING | read-write | current |
| eth0 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.6 | |||
| eth0Acl OBJECT-IDENTITY | 1.3.6.1.4.1.24350.6.1 | |||
| eth0AclMode OBJECT-TYPE access control list mode ( 'none', 'whitelist', 'blacklist' ) | 1.3.6.1.4.1.24350.6.1.1 | OCTET STRING | read-write | current |
| eth0Dhcp OBJECT-IDENTITY | 1.3.6.1.4.1.24350.6.2 | |||
| eth0DhcpAlwaysbroadcast OBJECT-TYPE always broadcast dhcp responses | 1.3.6.1.4.1.24350.6.2.1 | OCTET STRING | read-write | current |
| eth0DhcpDefaultleasetime OBJECT-TYPE default dhcp lease expiration in seconds | 1.3.6.1.4.1.24350.6.2.2 | INTEGER | read-write | current |
| eth0DhcpMaxleasetime OBJECT-TYPE maximum requestable dhcp lease expiration in seconds | 1.3.6.1.4.1.24350.6.2.3 | INTEGER | read-write | current |
| eth0DhcpRelay OBJECT-IDENTITY | 1.3.6.1.4.1.24350.6.2.4 | |||
| eth0DhcpRelayEnable OBJECT-TYPE use dhcp relay (if sys.dhcp.relay.enable=yes) | 1.3.6.1.4.1.24350.6.2.4.1 | OCTET STRING | read-write | current |
| eth0DhcpReserve OBJECT-TYPE ip addresses to reserve at bottom of range for static assignments | 1.3.6.1.4.1.24350.6.2.5 | INTEGER | read-write | current |
| eth0DhcpRole OBJECT-TYPE interface dhcp role (none, client, server) | 1.3.6.1.4.1.24350.6.2.6 | OCTET STRING | read-write | current |
| eth0Enable OBJECT-TYPE interface is enabled | 1.3.6.1.4.1.24350.6.3 | OCTET STRING | read-write | current |
| eth0If OBJECT-TYPE interface associated with this module | 1.3.6.1.4.1.24350.6.4 | OCTET STRING | read-only | current |
| eth0Ip OBJECT-IDENTITY | 1.3.6.1.4.1.24350.6.5 | |||
| eth0IpAddress OBJECT-TYPE ip address | 1.3.6.1.4.1.24350.6.5.1 | OCTET STRING | read-only | current |
| eth0IpAddressforce OBJECT-TYPE override .ip.address (or blank) | 1.3.6.1.4.1.24350.6.5.2 | OCTET STRING | read-write | current |
| eth0IpBroadcast OBJECT-TYPE broadcast address | 1.3.6.1.4.1.24350.6.5.3 | OCTET STRING | read-only | current |
| eth0IpBroadcastforce OBJECT-TYPE override .ip.broadcast (or blank) | 1.3.6.1.4.1.24350.6.5.4 | OCTET STRING | read-write | current |
| eth0IpGateway OBJECT-TYPE gateway address | 1.3.6.1.4.1.24350.6.5.5 | OCTET STRING | read-only | current |
| eth0IpGatewayforce OBJECT-TYPE override .ip.gateway (or blank) | 1.3.6.1.4.1.24350.6.5.6 | OCTET STRING | read-write | current |
| eth0IpImplicit OBJECT-IDENTITY | 1.3.6.1.4.1.24350.6.5.7 | |||
| eth0IpImplicitSize OBJECT-IDENTITY | 1.3.6.1.4.1.24350.6.5.7.1 | |||
| eth0IpImplicitSizeActual OBJECT-TYPE actual size of assigned address range | 1.3.6.1.4.1.24350.6.5.7.1.1 | INTEGER | read-only | current |
| eth0IpImplicitSizeRequested OBJECT-TYPE requested size of address range (multiple of 32 minus 1) | 1.3.6.1.4.1.24350.6.5.7.1.2 | OCTET STRING | read-write | current |
| eth0IpImplicitStart OBJECT-IDENTITY | 1.3.6.1.4.1.24350.6.5.7.2 | |||
| eth0IpImplicitStartActual OBJECT-TYPE actual assigned fourth octet | 1.3.6.1.4.1.24350.6.5.7.2.1 | INTEGER | read-only | current |
| eth0IpImplicitStartRequested OBJECT-TYPE requested interface fourth octet (multiple of 32 plus 1) | 1.3.6.1.4.1.24350.6.5.7.2.2 | OCTET STRING | read-write | current |
| eth0IpNetmask OBJECT-TYPE network mask | 1.3.6.1.4.1.24350.6.5.8 | OCTET STRING | read-only | current |
| eth0IpNetmaskforce OBJECT-TYPE override .ip.netmask (or blank) | 1.3.6.1.4.1.24350.6.5.9 | OCTET STRING | read-write | current |
| eth0Role OBJECT-TYPE intended interface role (gateway, access, bridge) | 1.3.6.1.4.1.24350.6.6 | OCTET STRING | read-write | current |
| eth0Routes OBJECT-IDENTITY | 1.3.6.1.4.1.24350.6.7 | |||
| eth0RoutesStatic OBJECT-TYPE static routes for this interface | 1.3.6.1.4.1.24350.6.7.1 | OCTET STRING | read-write | current |
| eth0Vlan OBJECT-IDENTITY | 1.3.6.1.4.1.24350.6.8 | |||
| eth0VlanEnable OBJECT-TYPE use a vlan for this interface | 1.3.6.1.4.1.24350.6.8.1 | OCTET STRING | read-write | current |
| eth0VlanId OBJECT-TYPE vlan id (0 and 1 are usually reserved) | 1.3.6.1.4.1.24350.6.8.2 | INTEGER | read-write | current |
| eth0Vpn OBJECT-IDENTITY | 1.3.6.1.4.1.24350.6.9 | |||
| eth0VpnDevice OBJECT-TYPE device type (tap or tun) | 1.3.6.1.4.1.24350.6.9.1 | OCTET STRING | read-write | current |
| eth0VpnEnable OBJECT-TYPE enable vpn on gateway node | 1.3.6.1.4.1.24350.6.9.2 | OCTET STRING | read-write | current |
| eth0VpnKeyfile OBJECT-TYPE base name of crt/key files | 1.3.6.1.4.1.24350.6.9.3 | OCTET STRING | read-write | current |
| eth0VpnPort OBJECT-TYPE port number at vpn server | 1.3.6.1.4.1.24350.6.9.4 | INTEGER | read-write | current |
| eth0VpnProtocol OBJECT-TYPE protocol used for vpn | 1.3.6.1.4.1.24350.6.9.5 | OCTET STRING | read-write | current |
| eth0VpnServer OBJECT-TYPE hostname or ip address of the vpn server | 1.3.6.1.4.1.24350.6.9.6 | OCTET STRING | read-write | current |
| br0 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.7 | |||
| br0Acl OBJECT-IDENTITY | 1.3.6.1.4.1.24350.7.1 | |||
| br0AclMode OBJECT-TYPE access control list mode ( 'none', 'whitelist', 'blacklist' ) | 1.3.6.1.4.1.24350.7.1.1 | OCTET STRING | read-write | current |
| br0Dhcp OBJECT-IDENTITY | 1.3.6.1.4.1.24350.7.2 | |||
| br0DhcpAlwaysbroadcast OBJECT-TYPE always broadcast dhcp responses | 1.3.6.1.4.1.24350.7.2.1 | OCTET STRING | read-write | current |
| br0DhcpDefaultleasetime OBJECT-TYPE default dhcp lease expiration in seconds | 1.3.6.1.4.1.24350.7.2.2 | INTEGER | read-write | current |
| br0DhcpMaxleasetime OBJECT-TYPE maximum requestable dhcp lease expiration in seconds | 1.3.6.1.4.1.24350.7.2.3 | INTEGER | read-write | current |
| br0DhcpRelay OBJECT-IDENTITY | 1.3.6.1.4.1.24350.7.2.4 | |||
| br0DhcpRelayEnable OBJECT-TYPE use dhcp relay (if sys.dhcp.relay.enable=yes) | 1.3.6.1.4.1.24350.7.2.4.1 | OCTET STRING | read-write | current |
| br0DhcpReserve OBJECT-TYPE ip addresses to reserve at bottom of range for static assignments | 1.3.6.1.4.1.24350.7.2.5 | INTEGER | read-write | current |
| br0DhcpRole OBJECT-TYPE interface dhcp role (none, client, server) | 1.3.6.1.4.1.24350.7.2.6 | OCTET STRING | read-write | current |
| br0Enable OBJECT-TYPE interface is enabled | 1.3.6.1.4.1.24350.7.3 | OCTET STRING | read-write | current |
| br0Forwardingdelay OBJECT-TYPE how long bridge watches traffic before participating | 1.3.6.1.4.1.24350.7.4 | INTEGER | read-write | current |
| br0If OBJECT-TYPE interface associated with this module | 1.3.6.1.4.1.24350.7.5 | OCTET STRING | read-only | current |
| br0Ip OBJECT-IDENTITY | 1.3.6.1.4.1.24350.7.6 | |||
| br0IpAddress OBJECT-TYPE ip address | 1.3.6.1.4.1.24350.7.6.1 | OCTET STRING | read-only | current |
| br0IpAddressforce OBJECT-TYPE override .ip.address (or blank) | 1.3.6.1.4.1.24350.7.6.2 | OCTET STRING | read-write | current |
| br0IpBroadcast OBJECT-TYPE broadcast address | 1.3.6.1.4.1.24350.7.6.3 | OCTET STRING | read-only | current |
| br0IpBroadcastforce OBJECT-TYPE override .ip.broadcast (or blank) | 1.3.6.1.4.1.24350.7.6.4 | OCTET STRING | read-write | current |
| br0IpGateway OBJECT-TYPE gateway address | 1.3.6.1.4.1.24350.7.6.5 | OCTET STRING | read-only | current |
| br0IpGatewayforce OBJECT-TYPE override .ip.gateway (or blank) | 1.3.6.1.4.1.24350.7.6.6 | OCTET STRING | read-write | current |
| br0IpNetmask OBJECT-TYPE network mask | 1.3.6.1.4.1.24350.7.6.7 | OCTET STRING | read-only | current |
| br0IpNetmaskforce OBJECT-TYPE override .ip.netmask (or blank) | 1.3.6.1.4.1.24350.7.6.8 | OCTET STRING | read-write | current |
| br0Role OBJECT-TYPE intended interface role (bridge) | 1.3.6.1.4.1.24350.7.7 | OCTET STRING | read-only | current |
| br0Routes OBJECT-IDENTITY | 1.3.6.1.4.1.24350.7.8 | |||
| br0RoutesStatic OBJECT-TYPE static routes for this interface | 1.3.6.1.4.1.24350.7.8.1 | OCTET STRING | read-write | current |
| br0Stp OBJECT-IDENTITY | 1.3.6.1.4.1.24350.7.9 | |||
| br0StpEnable OBJECT-TYPE enable spanning tree protocol | 1.3.6.1.4.1.24350.7.9.1 | OCTET STRING | read-write | current |
| alias99 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.8 | |||
| alias99If OBJECT-TYPE interface associated with this module | 1.3.6.1.4.1.24350.8.1 | OCTET STRING | read-only | current |
| alias99Ip OBJECT-IDENTITY | 1.3.6.1.4.1.24350.8.2 | |||
| alias99IpAddress OBJECT-TYPE ip address | 1.3.6.1.4.1.24350.8.2.1 | OCTET STRING | read-write | current |
| alias99IpBroadcast OBJECT-TYPE broadcast address | 1.3.6.1.4.1.24350.8.2.2 | OCTET STRING | read-write | current |
| alias99IpGateway OBJECT-TYPE gateway address | 1.3.6.1.4.1.24350.8.2.3 | OCTET STRING | read-write | current |
| alias99IpNetmask OBJECT-TYPE network mask | 1.3.6.1.4.1.24350.8.2.4 | OCTET STRING | read-write | current |
| radio0 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.9 | |||
| radio0Channel OBJECT-TYPE wireless channel | 1.3.6.1.4.1.24350.9.1 | INTEGER | read-write | current |
| radio0Chansize OBJECT-TYPE wireless channel size - 1=full, 2=half, 4=quarter | 1.3.6.1.4.1.24350.9.2 | OCTET STRING | read-write | current |
| radio0Distance OBJECT-TYPE distance (in miles or km, see sys.units) of maximum link distance, or blank | 1.3.6.1.4.1.24350.9.3 | OCTET STRING | read-write | current |
| radio0Distancemeters OBJECT-TYPE distance in meters | 1.3.6.1.4.1.24350.9.4 | OCTET STRING | read-write | current |
| radio0Frequency OBJECT-TYPE wireless frequency (overrides radio0.channel) | 1.3.6.1.4.1.24350.9.5 | OCTET STRING | read-write | current |
| radio0Mode OBJECT-TYPE 802.11 mode (0=auto, 1=802.11a, 2=802.11b, 3=802.11g) | 1.3.6.1.4.1.24350.9.6 | INTEGER | read-write | current |
| radio0Modes OBJECT-TYPE 802.11 modes supported by this card | 1.3.6.1.4.1.24350.9.7 | OCTET STRING | read-only | current |
| radio0Pureg OBJECT-TYPE 802.11g only mode (no 802.11b) | 1.3.6.1.4.1.24350.9.8 | OCTET STRING | read-write | current |
| radio0Ratectl OBJECT-TYPE rate control algorithm (sample, minstrel) | 1.3.6.1.4.1.24350.9.9 | OCTET STRING | read-write | current |
| radio0Rts OBJECT-TYPE rts threshold | 1.3.6.1.4.1.24350.9.10 | OCTET STRING | read-write | current |
| radio0Shortpreamble OBJECT-TYPE allow short preamble - buggy old clients may need this off | 1.3.6.1.4.1.24350.9.11 | OCTET STRING | read-write | current |
| radio0Turbo OBJECT-TYPE 802.11g turbo mode | 1.3.6.1.4.1.24350.9.12 | OCTET STRING | read-write | current |
| radio0Txpower OBJECT-TYPE max transmit power in dBm (0-30) | 1.3.6.1.4.1.24350.9.13 | OCTET STRING | read-write | current |
| radio0Wlans OBJECT-TYPE wlans mapped to this radio | 1.3.6.1.4.1.24350.9.14 | OCTET STRING | read-only | current |
| radio0Wlansextra OBJECT-TYPE | 1.3.6.1.4.1.24350.9.15 | OCTET STRING | read-only | current |
| radio1 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.10 | |||
| radio1Channel OBJECT-TYPE wireless channel | 1.3.6.1.4.1.24350.10.1 | INTEGER | read-write | current |
| radio1Chansize OBJECT-TYPE wireless channel size - 1=full, 2=half, 4=quarter | 1.3.6.1.4.1.24350.10.2 | OCTET STRING | read-write | current |
| radio1Distance OBJECT-TYPE distance (in miles or km, see sys.units) of maximum link distance, or blank | 1.3.6.1.4.1.24350.10.3 | OCTET STRING | read-write | current |
| radio1Distancemeters OBJECT-TYPE distance in meters | 1.3.6.1.4.1.24350.10.4 | OCTET STRING | read-write | current |
| radio1Frequency OBJECT-TYPE wireless frequency (overrides radio1.channel) | 1.3.6.1.4.1.24350.10.5 | OCTET STRING | read-write | current |
| radio1Mode OBJECT-TYPE 802.11 mode (0=auto, 1=802.11a, 2=802.11b, 3=802.11g) | 1.3.6.1.4.1.24350.10.6 | INTEGER | read-write | current |
| radio1Modes OBJECT-TYPE 802.11 modes supported by this card | 1.3.6.1.4.1.24350.10.7 | OCTET STRING | read-only | current |
| radio1Pureg OBJECT-TYPE 802.11g only mode (no 802.11b) | 1.3.6.1.4.1.24350.10.8 | OCTET STRING | read-write | current |
| radio1Ratectl OBJECT-TYPE rate control algorithm (sample, minstrel) | 1.3.6.1.4.1.24350.10.9 | OCTET STRING | read-write | current |
| radio1Rts OBJECT-TYPE rts threshold | 1.3.6.1.4.1.24350.10.10 | OCTET STRING | read-write | current |
| radio1Shortpreamble OBJECT-TYPE allow short preamble - buggy old clients may need this off | 1.3.6.1.4.1.24350.10.11 | OCTET STRING | read-write | current |
| radio1Turbo OBJECT-TYPE 802.11g turbo mode | 1.3.6.1.4.1.24350.10.12 | OCTET STRING | read-write | current |
| radio1Txpower OBJECT-TYPE max transmit power in dBm (0-30) | 1.3.6.1.4.1.24350.10.13 | OCTET STRING | read-write | current |
| radio1Wlans OBJECT-TYPE wlans mapped to this radio | 1.3.6.1.4.1.24350.10.14 | OCTET STRING | read-only | current |
| radio1Wlansextra OBJECT-TYPE | 1.3.6.1.4.1.24350.10.15 | OCTET STRING | read-only | current |
| wlan0 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.11 | |||
| wlan0Acl OBJECT-IDENTITY | 1.3.6.1.4.1.24350.11.1 | |||
| wlan0AclMode OBJECT-TYPE access control list mode ( 'none', 'whitelist', 'blacklist' ) | 1.3.6.1.4.1.24350.11.1.1 | OCTET STRING | read-write | current |
| wlan0Beaconinterval OBJECT-TYPE beacon interval in milliseconds | 1.3.6.1.4.1.24350.11.2 | INTEGER | read-write | current |
| wlan0Cellid OBJECT-TYPE adhoc cell id | 1.3.6.1.4.1.24350.11.3 | OCTET STRING | read-only | current |
| wlan0Dhcp OBJECT-IDENTITY | 1.3.6.1.4.1.24350.11.4 | |||
| wlan0DhcpAlwaysbroadcast OBJECT-TYPE always broadcast dhcp responses | 1.3.6.1.4.1.24350.11.4.1 | OCTET STRING | read-write | current |
| wlan0DhcpDefaultleasetime OBJECT-TYPE default dhcp lease expiration in seconds | 1.3.6.1.4.1.24350.11.4.2 | INTEGER | read-write | current |
| wlan0DhcpMaxleasetime OBJECT-TYPE maximum requestable dhcp lease expiration in seconds | 1.3.6.1.4.1.24350.11.4.3 | INTEGER | read-write | current |
| wlan0DhcpRelay OBJECT-IDENTITY | 1.3.6.1.4.1.24350.11.4.4 | |||
| wlan0DhcpRelayEnable OBJECT-TYPE use dhcp relay (if sys.dhcp.relay.enable=yes) | 1.3.6.1.4.1.24350.11.4.4.1 | OCTET STRING | read-write | current |
| wlan0DhcpReserve OBJECT-TYPE ip addresses to reserve at bottom of range for static assignments | 1.3.6.1.4.1.24350.11.4.5 | INTEGER | read-write | current |
| wlan0DhcpRole OBJECT-TYPE interface dhcp role (none, client, server) | 1.3.6.1.4.1.24350.11.4.6 | OCTET STRING | read-write | current |
| wlan0Enable OBJECT-TYPE interface is enabled | 1.3.6.1.4.1.24350.11.5 | OCTET STRING | read-write | current |
| wlan0Enhsec OBJECT-TYPE ignore clients that specify 'ANY' ssid | 1.3.6.1.4.1.24350.11.6 | OCTET STRING | read-write | current |
| wlan0Essid OBJECT-TYPE essid for this ap | 1.3.6.1.4.1.24350.11.7 | OCTET STRING | read-write | current |
| wlan0Fabric OBJECT-IDENTITY | 1.3.6.1.4.1.24350.11.8 | |||
| wlan0FabricArgs OBJECT-TYPE mesh fabric arguments - touch at your peril! | 1.3.6.1.4.1.24350.11.8.1 | OCTET STRING | read-write | current |
| wlan0FabricBridge OBJECT-TYPE bridge argument | 1.3.6.1.4.1.24350.11.8.2 | OCTET STRING | read-write | current |
| wlan0FabricCmd1 OBJECT-TYPE command to activate mesh fabric part 1 | 1.3.6.1.4.1.24350.11.8.3 | OCTET STRING | read-write | current |
| wlan0FabricCmd2 OBJECT-TYPE command to activate mesh part 2 | 1.3.6.1.4.1.24350.11.8.4 | OCTET STRING | read-write | current |
| wlan0FabricEnable OBJECT-TYPE run mesh fabric? | 1.3.6.1.4.1.24350.11.8.5 | OCTET STRING | read-write | current |
| wlan0FabricGateway OBJECT-IDENTITY | 1.3.6.1.4.1.24350.11.8.6 | |||
| wlan0FabricGatewayEnable OBJECT-TYPE is this node a gateway | 1.3.6.1.4.1.24350.11.8.6.1 | OCTET STRING | read-only | current |
| wlan0FabricGatewayIf OBJECT-TYPE interface acting as mesh gateway, if any | 1.3.6.1.4.1.24350.11.8.6.2 | OCTET STRING | read-only | current |
| wlan0FabricMargin OBJECT-TYPE if rssi drops this far below .join, drop the neighbor | 1.3.6.1.4.1.24350.11.8.7 | INTEGER | read-write | current |
| wlan0FabricRouteadvert OBJECT-TYPE route advertisement arguments | 1.3.6.1.4.1.24350.11.8.8 | OCTET STRING | read-write | current |
| wlan0FabricRssi OBJECT-IDENTITY | 1.3.6.1.4.1.24350.11.8.9 | |||
| wlan0FabricRssiJoin OBJECT-TYPE rssi level to join neighbor | 1.3.6.1.4.1.24350.11.8.9.1 | INTEGER | read-write | current |
| wlan0FabricRssiMargin OBJECT-TYPE if rssi drops this far below .join, drop neighbor | 1.3.6.1.4.1.24350.11.8.9.2 | INTEGER | read-write | current |
| wlan0Frag OBJECT-TYPE fragmentation threshold | 1.3.6.1.4.1.24350.11.9 | OCTET STRING | read-write | current |
| wlan0Hideessid OBJECT-TYPE don't broadcast the essid | 1.3.6.1.4.1.24350.11.10 | OCTET STRING | read-write | current |
| wlan0If OBJECT-TYPE interface associated with this module | 1.3.6.1.4.1.24350.11.11 | OCTET STRING | read-only | current |
| wlan0Ip OBJECT-IDENTITY | 1.3.6.1.4.1.24350.11.12 | |||
| wlan0IpAddress OBJECT-TYPE ip address | 1.3.6.1.4.1.24350.11.12.1 | OCTET STRING | read-only | current |
| wlan0IpAddressforce OBJECT-TYPE override .ip.address (or blank) | 1.3.6.1.4.1.24350.11.12.2 | OCTET STRING | read-only | current |
| wlan0IpBroadcast OBJECT-TYPE broadcast address | 1.3.6.1.4.1.24350.11.12.3 | OCTET STRING | read-only | current |
| wlan0IpBroadcastforce OBJECT-TYPE override .ip.broadcast (or blank) | 1.3.6.1.4.1.24350.11.12.4 | OCTET STRING | read-only | current |
| wlan0IpGateway OBJECT-TYPE gateway address | 1.3.6.1.4.1.24350.11.12.5 | OCTET STRING | read-only | current |
| wlan0IpGatewayforce OBJECT-TYPE override .ip.gateway (or blank) | 1.3.6.1.4.1.24350.11.12.6 | OCTET STRING | read-only | current |
| wlan0IpNetmask OBJECT-TYPE network mask | 1.3.6.1.4.1.24350.11.12.7 | OCTET STRING | read-write | current |
| wlan0IpNetmaskforce OBJECT-TYPE override .ip.netmask (or blank) | 1.3.6.1.4.1.24350.11.12.8 | OCTET STRING | read-only | current |
| wlan0Iwconfig OBJECT-IDENTITY | 1.3.6.1.4.1.24350.11.13 | |||
| wlan0IwconfigCmd OBJECT-TYPE parameters to pass to iwconfig after all other settings | 1.3.6.1.4.1.24350.11.13.1 | OCTET STRING | read-write | current |
| wlan0Iwpriv OBJECT-IDENTITY | 1.3.6.1.4.1.24350.11.14 | |||
| wlan0IwprivCmd OBJECT-TYPE parameters to pass to iwpriv after all other settings | 1.3.6.1.4.1.24350.11.14.1 | OCTET STRING | read-write | current |
| wlan0Key OBJECT-TYPE wep key - if present, overrides .keys | 1.3.6.1.4.1.24350.11.15 | OCTET STRING | read-write | current |
| wlan0Keys OBJECT-IDENTITY | 1.3.6.1.4.1.24350.11.16 | |||
| wlan0Keys1 OBJECT-TYPE one of four keys selected with .keys.default | 1.3.6.1.4.1.24350.11.16.1 | OCTET STRING | read-write | current |
| wlan0Keys2 OBJECT-TYPE one of four keys selected with .keys.default | 1.3.6.1.4.1.24350.11.16.2 | OCTET STRING | read-write | current |
| wlan0Keys3 OBJECT-TYPE one of four keys selected with .keys.default | 1.3.6.1.4.1.24350.11.16.3 | OCTET STRING | read-write | current |
| wlan0Keys4 OBJECT-TYPE one of four keys selected with .keys.default | 1.3.6.1.4.1.24350.11.16.4 | OCTET STRING | read-write | current |
| wlan0KeysDefault OBJECT-TYPE 1 to 4 to choose which of wlan0.keys.1-4 to use | 1.3.6.1.4.1.24350.11.16.5 | OCTET STRING | read-write | current |
| wlan0Mconfd OBJECT-IDENTITY | 1.3.6.1.4.1.24350.11.17 | |||
| wlan0MconfdEnable OBJECT-TYPE run mconfd daemon? distributed mesh configuration | 1.3.6.1.4.1.24350.11.17.1 | OCTET STRING | read-write | current |
| wlan0MconfdExternalhosts OBJECT-TYPE list of external hosts we try to make external | 1.3.6.1.4.1.24350.11.17.2 | OCTET STRING | read-only | current |
| wlan0Mode OBJECT-TYPE operating mode ( ap/master, adhoc, adhoc-demo, sta/client ) | 1.3.6.1.4.1.24350.11.18 | OCTET STRING | read-write | current |
| wlan0Mroute OBJECT-IDENTITY | 1.3.6.1.4.1.24350.11.19 | |||
| wlan0MrouteArgs OBJECT-TYPE mroute arguments | 1.3.6.1.4.1.24350.11.19.1 | OCTET STRING | read-write | current |
| wlan0MrouteCmd OBJECT-TYPE mroute command | 1.3.6.1.4.1.24350.11.19.2 | OCTET STRING | read-write | current |
| wlan0MrouteEnable OBJECT-TYPE run mroute daemon - IGMP query utility | 1.3.6.1.4.1.24350.11.19.3 | OCTET STRING | read-write | current |
| wlan0Mtu OBJECT-TYPE maximum transmission unit - may cause serious problems if set too low | 1.3.6.1.4.1.24350.11.20 | INTEGER | read-write | current |
| wlan0Radio OBJECT-TYPE which physical radio this vap is on (0 or 1) | 1.3.6.1.4.1.24350.11.21 | OCTET STRING | read-write | current |
| wlan0Rate OBJECT-TYPE communications rate | 1.3.6.1.4.1.24350.11.22 | OCTET STRING | read-write | current |
| wlan0Role OBJECT-TYPE intended interface role (mesh, pxp (point to point), bridge) | 1.3.6.1.4.1.24350.11.23 | OCTET STRING | read-write | current |
| wlan0Routes OBJECT-IDENTITY | 1.3.6.1.4.1.24350.11.24 | |||
| wlan0RoutesAddprivnets OBJECT-TYPE add sys.nets.internal.combined to mesh static routes? | 1.3.6.1.4.1.24350.11.24.1 | OCTET STRING | read-write | current |
| wlan0RoutesStatic OBJECT-TYPE static routes for this interface | 1.3.6.1.4.1.24350.11.24.2 | OCTET STRING | read-write | current |
| wlan0Topomc OBJECT-IDENTITY | 1.3.6.1.4.1.24350.11.25 | |||
| wlan0TopomcArgs OBJECT-TYPE topomc arguments | 1.3.6.1.4.1.24350.11.25.1 | OCTET STRING | read-write | current |
| wlan0TopomcCmd OBJECT-TYPE topomc command | 1.3.6.1.4.1.24350.11.25.2 | OCTET STRING | read-write | current |
| wlan0TopomcEnable OBJECT-TYPE run topomc daemon? - network topology reporting | 1.3.6.1.4.1.24350.11.25.3 | OCTET STRING | read-write | current |
| wlan1 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.12 | |||
| wlan1Acl OBJECT-IDENTITY | 1.3.6.1.4.1.24350.12.1 | |||
| wlan1AclMode OBJECT-TYPE access control list mode ( 'none', 'whitelist', 'blacklist' ) | 1.3.6.1.4.1.24350.12.1.1 | OCTET STRING | read-write | current |
| wlan1Beaconinterval OBJECT-TYPE beacon interval in milliseconds | 1.3.6.1.4.1.24350.12.2 | INTEGER | read-write | current |
| wlan1Cellid OBJECT-TYPE cell id for adhoc mode | 1.3.6.1.4.1.24350.12.3 | OCTET STRING | read-write | current |
| wlan1Dhcp OBJECT-IDENTITY | 1.3.6.1.4.1.24350.12.4 | |||
| wlan1DhcpAlwaysbroadcast OBJECT-TYPE always broadcast dhcp responses | 1.3.6.1.4.1.24350.12.4.1 | OCTET STRING | read-write | current |
| wlan1DhcpDefaultleasetime OBJECT-TYPE default dhcp lease expiration in seconds | 1.3.6.1.4.1.24350.12.4.2 | INTEGER | read-write | current |
| wlan1DhcpMaxleasetime OBJECT-TYPE maximum requestable dhcp lease expiration in seconds | 1.3.6.1.4.1.24350.12.4.3 | INTEGER | read-write | current |
| wlan1DhcpRelay OBJECT-IDENTITY | 1.3.6.1.4.1.24350.12.4.4 | |||
| wlan1DhcpRelayEnable OBJECT-TYPE use dhcp relay (if sys.dhcp.relay.enable=yes) | 1.3.6.1.4.1.24350.12.4.4.1 | OCTET STRING | read-write | current |
| wlan1DhcpReserve OBJECT-TYPE ip addresses to reserve at bottom of range for static assignments | 1.3.6.1.4.1.24350.12.4.5 | INTEGER | read-write | current |
| wlan1DhcpRole OBJECT-TYPE interface dhcp role (none, client, server) | 1.3.6.1.4.1.24350.12.4.6 | OCTET STRING | read-write | current |
| wlan1Enable OBJECT-TYPE interface is enabled | 1.3.6.1.4.1.24350.12.5 | OCTET STRING | read-write | current |
| wlan1Enhsec OBJECT-TYPE ignore clients that specify 'ANY' ssid | 1.3.6.1.4.1.24350.12.6 | OCTET STRING | read-write | current |
| wlan1Essid OBJECT-TYPE essid for this ap | 1.3.6.1.4.1.24350.12.7 | OCTET STRING | read-write | current |
| wlan1Frag OBJECT-TYPE fragmentation threshold | 1.3.6.1.4.1.24350.12.8 | OCTET STRING | read-write | current |
| wlan1Hideessid OBJECT-TYPE don't broadcast the essid | 1.3.6.1.4.1.24350.12.9 | OCTET STRING | read-write | current |
| wlan1If OBJECT-TYPE interface associated with this module | 1.3.6.1.4.1.24350.12.10 | OCTET STRING | read-only | current |
| wlan1Ip OBJECT-IDENTITY | 1.3.6.1.4.1.24350.12.11 | |||
| wlan1IpAddress OBJECT-TYPE ip address | 1.3.6.1.4.1.24350.12.11.1 | OCTET STRING | read-only | current |
| wlan1IpAddressforce OBJECT-TYPE override .ip.address (or blank) | 1.3.6.1.4.1.24350.12.11.2 | OCTET STRING | read-write | current |
| wlan1IpBroadcast OBJECT-TYPE broadcast address | 1.3.6.1.4.1.24350.12.11.3 | OCTET STRING | read-only | current |
| wlan1IpBroadcastforce OBJECT-TYPE override .ip.broadcast (or blank) | 1.3.6.1.4.1.24350.12.11.4 | OCTET STRING | read-write | current |
| wlan1IpGateway OBJECT-TYPE gateway address | 1.3.6.1.4.1.24350.12.11.5 | OCTET STRING | read-only | current |
| wlan1IpGatewayforce OBJECT-TYPE override .ip.gateway (or blank) | 1.3.6.1.4.1.24350.12.11.6 | OCTET STRING | read-write | current |
| wlan1IpImplicit OBJECT-IDENTITY | 1.3.6.1.4.1.24350.12.11.7 | |||
| wlan1IpImplicitSize OBJECT-IDENTITY | 1.3.6.1.4.1.24350.12.11.7.1 | |||
| wlan1IpImplicitSizeActual OBJECT-TYPE actual size of assigned address range | 1.3.6.1.4.1.24350.12.11.7.1.1 | INTEGER | read-only | current |
| wlan1IpImplicitSizeRequested OBJECT-TYPE requested size of address range (multiple of 32 minus 1) | 1.3.6.1.4.1.24350.12.11.7.1.2 | OCTET STRING | read-write | current |
| wlan1IpImplicitStart OBJECT-IDENTITY | 1.3.6.1.4.1.24350.12.11.7.2 | |||
| wlan1IpImplicitStartActual OBJECT-TYPE actual assigned fourth octet | 1.3.6.1.4.1.24350.12.11.7.2.1 | INTEGER | read-only | current |
| wlan1IpImplicitStartRequested OBJECT-TYPE requested interface fourth octet (multiple of 32 plus 1) | 1.3.6.1.4.1.24350.12.11.7.2.2 | OCTET STRING | read-write | current |
| wlan1IpNetmask OBJECT-TYPE network mask | 1.3.6.1.4.1.24350.12.11.8 | OCTET STRING | read-only | current |
| wlan1IpNetmaskforce OBJECT-TYPE override .ip.netmask (or blank) | 1.3.6.1.4.1.24350.12.11.9 | OCTET STRING | read-write | current |
| wlan1Iwconfig OBJECT-IDENTITY | 1.3.6.1.4.1.24350.12.12 | |||
| wlan1IwconfigCmd OBJECT-TYPE parameters to pass to iwconfig after all other settings | 1.3.6.1.4.1.24350.12.12.1 | OCTET STRING | read-write | current |
| wlan1Iwpriv OBJECT-IDENTITY | 1.3.6.1.4.1.24350.12.13 | |||
| wlan1IwprivCmd OBJECT-TYPE parameters to pass to iwpriv after all other settings | 1.3.6.1.4.1.24350.12.13.1 | OCTET STRING | read-write | current |
| wlan1Key OBJECT-TYPE wep key - if present, overrides .keys | 1.3.6.1.4.1.24350.12.14 | OCTET STRING | read-write | current |
| wlan1Keys OBJECT-IDENTITY | 1.3.6.1.4.1.24350.12.15 | |||
| wlan1Keys1 OBJECT-TYPE one of four keys selected with .keys.default | 1.3.6.1.4.1.24350.12.15.1 | OCTET STRING | read-write | current |
| wlan1Keys2 OBJECT-TYPE one of four keys selected with .keys.default | 1.3.6.1.4.1.24350.12.15.2 | OCTET STRING | read-write | current |
| wlan1Keys3 OBJECT-TYPE one of four keys selected with .keys.default | 1.3.6.1.4.1.24350.12.15.3 | OCTET STRING | read-write | current |
| wlan1Keys4 OBJECT-TYPE one of four keys selected with .keys.default | 1.3.6.1.4.1.24350.12.15.4 | OCTET STRING | read-write | current |
| wlan1KeysDefault OBJECT-TYPE 1 to 4 to choose which of wlan1.keys.1-4 to use | 1.3.6.1.4.1.24350.12.15.5 | OCTET STRING | read-write | current |
| wlan1Mode OBJECT-TYPE operating mode ( ap/master, adhoc, adhoc-demo, sta/client ) | 1.3.6.1.4.1.24350.12.16 | OCTET STRING | read-write | current |
| wlan1Mtu OBJECT-TYPE maximum transmission unit - may cause serious problems if set too low | 1.3.6.1.4.1.24350.12.17 | INTEGER | read-write | current |
| wlan1Radio OBJECT-TYPE which physical radio this vap is on (0 or 1) | 1.3.6.1.4.1.24350.12.18 | OCTET STRING | read-write | current |
| wlan1Rate OBJECT-TYPE communications rate | 1.3.6.1.4.1.24350.12.19 | OCTET STRING | read-write | current |
| wlan1Role OBJECT-TYPE intended interface role (access, bridge) | 1.3.6.1.4.1.24350.12.20 | OCTET STRING | read-write | current |
| wlan1Routes OBJECT-IDENTITY | 1.3.6.1.4.1.24350.12.21 | |||
| wlan1RoutesStatic OBJECT-TYPE static routes for this interface | 1.3.6.1.4.1.24350.12.21.1 | OCTET STRING | read-write | current |
| wlan1Vlan OBJECT-IDENTITY | 1.3.6.1.4.1.24350.12.22 | |||
| wlan1VlanEnable OBJECT-TYPE use a vlan for this interface | 1.3.6.1.4.1.24350.12.22.1 | OCTET STRING | read-write | current |
| wlan1VlanId OBJECT-TYPE vlan id (0 and 1 are usually reserved) | 1.3.6.1.4.1.24350.12.22.2 | INTEGER | read-write | current |
| wlan1Wpa OBJECT-IDENTITY | 1.3.6.1.4.1.24350.12.23 | |||
| wlan1WpaAuth OBJECT-IDENTITY | 1.3.6.1.4.1.24350.12.23.1 | |||
| wlan1WpaAuthArgs OBJECT-TYPE arguments passed to authenticator | 1.3.6.1.4.1.24350.12.23.1.1 | OCTET STRING | read-write | current |
| wlan1WpaAuthCustom OBJECT-TYPE command used to start authenticator if .wpa.auth.type is 'custom' | 1.3.6.1.4.1.24350.12.23.1.2 | OCTET STRING | read-write | current |
| wlan1WpaAuthInternal OBJECT-TYPE 0 for external, 1 for internal | 1.3.6.1.4.1.24350.12.23.1.3 | OCTET STRING | read-write | current |
| wlan1WpaAuthServer OBJECT-IDENTITY | 1.3.6.1.4.1.24350.12.23.1.4 | |||
| wlan1WpaAuthServerAddr OBJECT-TYPE authentication server address | 1.3.6.1.4.1.24350.12.23.1.4.1 | OCTET STRING | read-write | current |
| wlan1WpaAuthServerPort OBJECT-TYPE authentication server port | 1.3.6.1.4.1.24350.12.23.1.4.2 | INTEGER | read-write | current |
| wlan1WpaAuthServerSharedsecret OBJECT-TYPE shared secret | 1.3.6.1.4.1.24350.12.23.1.4.3 | OCTET STRING | read-write | current |
| wlan1WpaAuthType OBJECT-TYPE 'hostapd' or 'custom' | 1.3.6.1.4.1.24350.12.23.1.5 | OCTET STRING | read-write | current |
| wlan1WpaBridge OBJECT-TYPE bridge if any, set by sys.l2.bridge.enable | 1.3.6.1.4.1.24350.12.23.2 | OCTET STRING | read-only | current |
| wlan1WpaCa OBJECT-IDENTITY | 1.3.6.1.4.1.24350.12.23.3 | |||
| wlan1WpaCaCert OBJECT-IDENTITY | 1.3.6.1.4.1.24350.12.23.3.1 | |||
| wlan1WpaCaCertFile OBJECT-TYPE ca_cert file | 1.3.6.1.4.1.24350.12.23.3.1.1 | OCTET STRING | read-write | current |
| wlan1WpaEapol OBJECT-IDENTITY | 1.3.6.1.4.1.24350.12.23.4 | |||
| wlan1WpaEapolVersion OBJECT-TYPE 2 is default, but some older clients need 1 | 1.3.6.1.4.1.24350.12.23.4.1 | OCTET STRING | read-write | current |
| wlan1WpaEnable OBJECT-TYPE wpa support enabled? | 1.3.6.1.4.1.24350.12.23.5 | OCTET STRING | read-write | current |
| wlan1WpaEssid OBJECT-TYPE essid for wpa authentication | 1.3.6.1.4.1.24350.12.23.6 | OCTET STRING | read-write | current |
| wlan1WpaIf OBJECT-TYPE management frame interface, same as wlan1.if | 1.3.6.1.4.1.24350.12.23.7 | OCTET STRING | read-only | current |
| wlan1WpaKeymgmt OBJECT-TYPE WPA-PSK and/or WPA-EAP | 1.3.6.1.4.1.24350.12.23.8 | OCTET STRING | read-write | current |
| wlan1WpaMode OBJECT-TYPE wpa modes: 1=wpa1, 2=wpa2, 3=both | 1.3.6.1.4.1.24350.12.23.9 | INTEGER | read-write | current |
| wlan1WpaNode OBJECT-IDENTITY | 1.3.6.1.4.1.24350.12.23.10 | |||
| wlan1WpaNodeCert OBJECT-IDENTITY | 1.3.6.1.4.1.24350.12.23.10.1 | |||
| wlan1WpaNodeCertFile OBJECT-TYPE server_cert file | 1.3.6.1.4.1.24350.12.23.10.1.1 | OCTET STRING | read-write | current |
| wlan1WpaNodeKey OBJECT-IDENTITY | 1.3.6.1.4.1.24350.12.23.10.2 | |||
| wlan1WpaNodeKeyFile OBJECT-TYPE private_key file | 1.3.6.1.4.1.24350.12.23.10.2.1 | OCTET STRING | read-write | current |
| wlan1WpaNodeKeyPassphrase OBJECT-TYPE passphrase for the node's private key | 1.3.6.1.4.1.24350.12.23.10.2.2 | OCTET STRING | read-write | current |
| wlan1WpaPairwise OBJECT-TYPE accepted cipher suites - CCMP and/or TKIP | 1.3.6.1.4.1.24350.12.23.11 | OCTET STRING | read-write | current |
| wlan1WpaPassphrase OBJECT-TYPE wpa passphrase | 1.3.6.1.4.1.24350.12.23.12 | OCTET STRING | read-write | current |
| wlan2 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.13 | |||
| wlan2Acl OBJECT-IDENTITY | 1.3.6.1.4.1.24350.13.1 | |||
| wlan2AclMode OBJECT-TYPE access control list mode ( 'none', 'whitelist', 'blacklist' ) | 1.3.6.1.4.1.24350.13.1.1 | OCTET STRING | read-write | current |
| wlan2Beaconinterval OBJECT-TYPE beacon interval in milliseconds | 1.3.6.1.4.1.24350.13.2 | INTEGER | read-write | current |
| wlan2Cellid OBJECT-TYPE cell id for adhoc mode | 1.3.6.1.4.1.24350.13.3 | OCTET STRING | read-write | current |
| wlan2Dhcp OBJECT-IDENTITY | 1.3.6.1.4.1.24350.13.4 | |||
| wlan2DhcpAlwaysbroadcast OBJECT-TYPE always broadcast dhcp responses | 1.3.6.1.4.1.24350.13.4.1 | OCTET STRING | read-write | current |
| wlan2DhcpDefaultleasetime OBJECT-TYPE default dhcp lease expiration in seconds | 1.3.6.1.4.1.24350.13.4.2 | INTEGER | read-write | current |
| wlan2DhcpMaxleasetime OBJECT-TYPE maximum requestable dhcp lease expiration in seconds | 1.3.6.1.4.1.24350.13.4.3 | INTEGER | read-write | current |
| wlan2DhcpRelay OBJECT-IDENTITY | 1.3.6.1.4.1.24350.13.4.4 | |||
| wlan2DhcpRelayEnable OBJECT-TYPE use dhcp relay (if sys.dhcp.relay.enable=yes) | 1.3.6.1.4.1.24350.13.4.4.1 | OCTET STRING | read-write | current |
| wlan2DhcpReserve OBJECT-TYPE ip addresses to reserve at bottom of range for static assignments | 1.3.6.1.4.1.24350.13.4.5 | INTEGER | read-write | current |
| wlan2DhcpRole OBJECT-TYPE interface dhcp role (none, client, server) | 1.3.6.1.4.1.24350.13.4.6 | OCTET STRING | read-write | current |
| wlan2Enable OBJECT-TYPE interface is enabled | 1.3.6.1.4.1.24350.13.5 | OCTET STRING | read-write | current |
| wlan2Enhsec OBJECT-TYPE ignore clients that specify 'ANY' ssid | 1.3.6.1.4.1.24350.13.6 | OCTET STRING | read-write | current |
| wlan2Essid OBJECT-TYPE essid for this ap | 1.3.6.1.4.1.24350.13.7 | OCTET STRING | read-write | current |
| wlan2Frag OBJECT-TYPE fragmentation threshold | 1.3.6.1.4.1.24350.13.8 | OCTET STRING | read-write | current |
| wlan2Hideessid OBJECT-TYPE don't broadcast the essid | 1.3.6.1.4.1.24350.13.9 | OCTET STRING | read-write | current |
| wlan2If OBJECT-TYPE interface associated with this module | 1.3.6.1.4.1.24350.13.10 | OCTET STRING | read-only | current |
| wlan2Ip OBJECT-IDENTITY | 1.3.6.1.4.1.24350.13.11 | |||
| wlan2IpAddress OBJECT-TYPE ip address | 1.3.6.1.4.1.24350.13.11.1 | OCTET STRING | read-only | current |
| wlan2IpAddressforce OBJECT-TYPE override .ip.address (or blank) | 1.3.6.1.4.1.24350.13.11.2 | OCTET STRING | read-write | current |
| wlan2IpBroadcast OBJECT-TYPE broadcast address | 1.3.6.1.4.1.24350.13.11.3 | OCTET STRING | read-only | current |
| wlan2IpBroadcastforce OBJECT-TYPE override .ip.broadcast (or blank) | 1.3.6.1.4.1.24350.13.11.4 | OCTET STRING | read-write | current |
| wlan2IpGateway OBJECT-TYPE gateway address | 1.3.6.1.4.1.24350.13.11.5 | OCTET STRING | read-only | current |
| wlan2IpGatewayforce OBJECT-TYPE override .ip.gateway (or blank) | 1.3.6.1.4.1.24350.13.11.6 | OCTET STRING | read-write | current |
| wlan2IpImplicit OBJECT-IDENTITY | 1.3.6.1.4.1.24350.13.11.7 | |||
| wlan2IpImplicitSize OBJECT-IDENTITY | 1.3.6.1.4.1.24350.13.11.7.1 | |||
| wlan2IpImplicitSizeActual OBJECT-TYPE actual size of assigned address range | 1.3.6.1.4.1.24350.13.11.7.1.1 | INTEGER | read-only | current |
| wlan2IpImplicitSizeRequested OBJECT-TYPE requested size of address range (multiple of 32 minus 1) | 1.3.6.1.4.1.24350.13.11.7.1.2 | OCTET STRING | read-write | current |
| wlan2IpImplicitStart OBJECT-IDENTITY | 1.3.6.1.4.1.24350.13.11.7.2 | |||
| wlan2IpImplicitStartActual OBJECT-TYPE actual assigned fourth octet | 1.3.6.1.4.1.24350.13.11.7.2.1 | INTEGER | read-only | current |
| wlan2IpImplicitStartRequested OBJECT-TYPE requested interface fourth octet (multiple of 32 plus 1) | 1.3.6.1.4.1.24350.13.11.7.2.2 | OCTET STRING | read-write | current |
| wlan2IpNetmask OBJECT-TYPE network mask | 1.3.6.1.4.1.24350.13.11.8 | OCTET STRING | read-only | current |
| wlan2IpNetmaskforce OBJECT-TYPE override .ip.netmask (or blank) | 1.3.6.1.4.1.24350.13.11.9 | OCTET STRING | read-write | current |
| wlan2Iwconfig OBJECT-IDENTITY | 1.3.6.1.4.1.24350.13.12 | |||
| wlan2IwconfigCmd OBJECT-TYPE parameters to pass to iwconfig after all other settings | 1.3.6.1.4.1.24350.13.12.1 | OCTET STRING | read-write | current |
| wlan2Iwpriv OBJECT-IDENTITY | 1.3.6.1.4.1.24350.13.13 | |||
| wlan2IwprivCmd OBJECT-TYPE parameters to pass to iwpriv after all other settings | 1.3.6.1.4.1.24350.13.13.1 | OCTET STRING | read-write | current |
| wlan2Key OBJECT-TYPE wep key - if present, overrides .keys | 1.3.6.1.4.1.24350.13.14 | OCTET STRING | read-write | current |
| wlan2Keys OBJECT-IDENTITY | 1.3.6.1.4.1.24350.13.15 | |||
| wlan2Keys1 OBJECT-TYPE one of four keys selected with .keys.default | 1.3.6.1.4.1.24350.13.15.1 | OCTET STRING | read-write | current |
| wlan2Keys2 OBJECT-TYPE one of four keys selected with .keys.default | 1.3.6.1.4.1.24350.13.15.2 | OCTET STRING | read-write | current |
| wlan2Keys3 OBJECT-TYPE one of four keys selected with .keys.default | 1.3.6.1.4.1.24350.13.15.3 | OCTET STRING | read-write | current |
| wlan2Keys4 OBJECT-TYPE one of four keys selected with .keys.default | 1.3.6.1.4.1.24350.13.15.4 | OCTET STRING | read-write | current |
| wlan2KeysDefault OBJECT-TYPE 1 to 4 to choose which of wlan2.keys.1-4 to use | 1.3.6.1.4.1.24350.13.15.5 | OCTET STRING | read-write | current |
| wlan2Mode OBJECT-TYPE operating mode ( ap/master, adhoc, adhoc-demo, sta/client ) | 1.3.6.1.4.1.24350.13.16 | OCTET STRING | read-write | current |
| wlan2Mtu OBJECT-TYPE maximum transmission unit - may cause serious problems if set too low | 1.3.6.1.4.1.24350.13.17 | INTEGER | read-write | current |
| wlan2Radio OBJECT-TYPE which physical radio this vap is on (0 or 1) | 1.3.6.1.4.1.24350.13.18 | OCTET STRING | read-write | current |
| wlan2Rate OBJECT-TYPE communications rate | 1.3.6.1.4.1.24350.13.19 | OCTET STRING | read-write | current |
| wlan2Role OBJECT-TYPE intended interface role (access, bridge) | 1.3.6.1.4.1.24350.13.20 | OCTET STRING | read-write | current |
| wlan2Routes OBJECT-IDENTITY | 1.3.6.1.4.1.24350.13.21 | |||
| wlan2RoutesStatic OBJECT-TYPE static routes for this interface | 1.3.6.1.4.1.24350.13.21.1 | OCTET STRING | read-write | current |
| wlan2Vlan OBJECT-IDENTITY | 1.3.6.1.4.1.24350.13.22 | |||
| wlan2VlanEnable OBJECT-TYPE use a vlan for this interface | 1.3.6.1.4.1.24350.13.22.1 | OCTET STRING | read-write | current |
| wlan2VlanId OBJECT-TYPE vlan id (0 and 1 are usually reserved) | 1.3.6.1.4.1.24350.13.22.2 | INTEGER | read-write | current |
| wlan2Wpa OBJECT-IDENTITY | 1.3.6.1.4.1.24350.13.23 | |||
| wlan2WpaAuth OBJECT-IDENTITY | 1.3.6.1.4.1.24350.13.23.1 | |||
| wlan2WpaAuthArgs OBJECT-TYPE arguments passed to authenticator | 1.3.6.1.4.1.24350.13.23.1.1 | OCTET STRING | read-write | current |
| wlan2WpaAuthCustom OBJECT-TYPE command used to start authenticator if .wpa.auth.type is 'custom' | 1.3.6.1.4.1.24350.13.23.1.2 | OCTET STRING | read-write | current |
| wlan2WpaAuthInternal OBJECT-TYPE 0 for external, 1 for internal | 1.3.6.1.4.1.24350.13.23.1.3 | OCTET STRING | read-write | current |
| wlan2WpaAuthServer OBJECT-IDENTITY | 1.3.6.1.4.1.24350.13.23.1.4 | |||
| wlan2WpaAuthServerAddr OBJECT-TYPE authentication server address | 1.3.6.1.4.1.24350.13.23.1.4.1 | OCTET STRING | read-write | current |
| wlan2WpaAuthServerPort OBJECT-TYPE authentication server port | 1.3.6.1.4.1.24350.13.23.1.4.2 | INTEGER | read-write | current |
| wlan2WpaAuthServerSharedsecret OBJECT-TYPE shared secret | 1.3.6.1.4.1.24350.13.23.1.4.3 | OCTET STRING | read-write | current |
| wlan2WpaAuthType OBJECT-TYPE 'hostapd' or 'custom' | 1.3.6.1.4.1.24350.13.23.1.5 | OCTET STRING | read-write | current |
| wlan2WpaBridge OBJECT-TYPE bridge if any, set by sys.l2.bridge.enable | 1.3.6.1.4.1.24350.13.23.2 | OCTET STRING | read-only | current |
| wlan2WpaCa OBJECT-IDENTITY | 1.3.6.1.4.1.24350.13.23.3 | |||
| wlan2WpaCaCert OBJECT-IDENTITY | 1.3.6.1.4.1.24350.13.23.3.1 | |||
| wlan2WpaCaCertFile OBJECT-TYPE ca_cert file | 1.3.6.1.4.1.24350.13.23.3.1.1 | OCTET STRING | read-write | current |
| wlan2WpaEapol OBJECT-IDENTITY | 1.3.6.1.4.1.24350.13.23.4 | |||
| wlan2WpaEapolVersion OBJECT-TYPE 2 is default, but some older clients need 1 | 1.3.6.1.4.1.24350.13.23.4.1 | OCTET STRING | read-write | current |
| wlan2WpaEnable OBJECT-TYPE wpa support enabled? | 1.3.6.1.4.1.24350.13.23.5 | OCTET STRING | read-write | current |
| wlan2WpaEssid OBJECT-TYPE essid for wpa authentication | 1.3.6.1.4.1.24350.13.23.6 | OCTET STRING | read-write | current |
| wlan2WpaIf OBJECT-TYPE management frame interface, same as wlan2.if | 1.3.6.1.4.1.24350.13.23.7 | OCTET STRING | read-only | current |
| wlan2WpaKeymgmt OBJECT-TYPE WPA-PSK and/or WPA-EAP | 1.3.6.1.4.1.24350.13.23.8 | OCTET STRING | read-write | current |
| wlan2WpaMode OBJECT-TYPE wpa modes: 1=wpa1, 2=wpa2, 3=both | 1.3.6.1.4.1.24350.13.23.9 | INTEGER | read-write | current |
| wlan2WpaNode OBJECT-IDENTITY | 1.3.6.1.4.1.24350.13.23.10 | |||
| wlan2WpaNodeCert OBJECT-IDENTITY | 1.3.6.1.4.1.24350.13.23.10.1 | |||
| wlan2WpaNodeCertFile OBJECT-TYPE server_cert file | 1.3.6.1.4.1.24350.13.23.10.1.1 | OCTET STRING | read-write | current |
| wlan2WpaNodeKey OBJECT-IDENTITY | 1.3.6.1.4.1.24350.13.23.10.2 | |||
| wlan2WpaNodeKeyFile OBJECT-TYPE private_key file | 1.3.6.1.4.1.24350.13.23.10.2.1 | OCTET STRING | read-write | current |
| wlan2WpaNodeKeyPassphrase OBJECT-TYPE passphrase for the node's private key | 1.3.6.1.4.1.24350.13.23.10.2.2 | OCTET STRING | read-write | current |
| wlan2WpaPairwise OBJECT-TYPE accepted cipher suites - CCMP and/or TKIP | 1.3.6.1.4.1.24350.13.23.11 | OCTET STRING | read-write | current |
| wlan2WpaPassphrase OBJECT-TYPE wpa passphrase | 1.3.6.1.4.1.24350.13.23.12 | OCTET STRING | read-write | current |
| wlan3 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.14 | |||
| wlan3Acl OBJECT-IDENTITY | 1.3.6.1.4.1.24350.14.1 | |||
| wlan3AclMode OBJECT-TYPE access control list mode ( 'none', 'whitelist', 'blacklist' ) | 1.3.6.1.4.1.24350.14.1.1 | OCTET STRING | read-write | current |
| wlan3Beaconinterval OBJECT-TYPE beacon interval in milliseconds | 1.3.6.1.4.1.24350.14.2 | INTEGER | read-write | current |
| wlan3Cellid OBJECT-TYPE cell id for adhoc mode | 1.3.6.1.4.1.24350.14.3 | OCTET STRING | read-write | current |
| wlan3Dhcp OBJECT-IDENTITY | 1.3.6.1.4.1.24350.14.4 | |||
| wlan3DhcpAlwaysbroadcast OBJECT-TYPE always broadcast dhcp responses | 1.3.6.1.4.1.24350.14.4.1 | OCTET STRING | read-write | current |
| wlan3DhcpDefaultleasetime OBJECT-TYPE default dhcp lease expiration in seconds | 1.3.6.1.4.1.24350.14.4.2 | INTEGER | read-write | current |
| wlan3DhcpMaxleasetime OBJECT-TYPE maximum requestable dhcp lease expiration in seconds | 1.3.6.1.4.1.24350.14.4.3 | INTEGER | read-write | current |
| wlan3DhcpRelay OBJECT-IDENTITY | 1.3.6.1.4.1.24350.14.4.4 | |||
| wlan3DhcpRelayEnable OBJECT-TYPE use dhcp relay (if sys.dhcp.relay.enable=yes) | 1.3.6.1.4.1.24350.14.4.4.1 | OCTET STRING | read-write | current |
| wlan3DhcpReserve OBJECT-TYPE ip addresses to reserve at bottom of range for static assignments | 1.3.6.1.4.1.24350.14.4.5 | INTEGER | read-write | current |
| wlan3DhcpRole OBJECT-TYPE interface dhcp role (none, client, server) | 1.3.6.1.4.1.24350.14.4.6 | OCTET STRING | read-write | current |
| wlan3Enable OBJECT-TYPE interface is enabled | 1.3.6.1.4.1.24350.14.5 | OCTET STRING | read-write | current |
| wlan3Enhsec OBJECT-TYPE ignore clients that specify 'ANY' ssid | 1.3.6.1.4.1.24350.14.6 | OCTET STRING | read-write | current |
| wlan3Essid OBJECT-TYPE essid for this ap | 1.3.6.1.4.1.24350.14.7 | OCTET STRING | read-write | current |
| wlan3Frag OBJECT-TYPE fragmentation threshold | 1.3.6.1.4.1.24350.14.8 | OCTET STRING | read-write | current |
| wlan3Hideessid OBJECT-TYPE don't broadcast the essid | 1.3.6.1.4.1.24350.14.9 | OCTET STRING | read-write | current |
| wlan3If OBJECT-TYPE interface associated with this module | 1.3.6.1.4.1.24350.14.10 | OCTET STRING | read-only | current |
| wlan3Ip OBJECT-IDENTITY | 1.3.6.1.4.1.24350.14.11 | |||
| wlan3IpAddress OBJECT-TYPE ip address | 1.3.6.1.4.1.24350.14.11.1 | OCTET STRING | read-only | current |
| wlan3IpAddressforce OBJECT-TYPE override .ip.address (or blank) | 1.3.6.1.4.1.24350.14.11.2 | OCTET STRING | read-write | current |
| wlan3IpBroadcast OBJECT-TYPE broadcast address | 1.3.6.1.4.1.24350.14.11.3 | OCTET STRING | read-only | current |
| wlan3IpBroadcastforce OBJECT-TYPE override .ip.broadcast (or blank) | 1.3.6.1.4.1.24350.14.11.4 | OCTET STRING | read-write | current |
| wlan3IpGateway OBJECT-TYPE gateway address | 1.3.6.1.4.1.24350.14.11.5 | OCTET STRING | read-only | current |
| wlan3IpGatewayforce OBJECT-TYPE override .ip.gateway (or blank) | 1.3.6.1.4.1.24350.14.11.6 | OCTET STRING | read-write | current |
| wlan3IpImplicit OBJECT-IDENTITY | 1.3.6.1.4.1.24350.14.11.7 | |||
| wlan3IpImplicitSize OBJECT-IDENTITY | 1.3.6.1.4.1.24350.14.11.7.1 | |||
| wlan3IpImplicitSizeActual OBJECT-TYPE actual size of assigned address range | 1.3.6.1.4.1.24350.14.11.7.1.1 | INTEGER | read-only | current |
| wlan3IpImplicitSizeRequested OBJECT-TYPE requested size of address range (multiple of 32 minus 1) | 1.3.6.1.4.1.24350.14.11.7.1.2 | OCTET STRING | read-write | current |
| wlan3IpImplicitStart OBJECT-IDENTITY | 1.3.6.1.4.1.24350.14.11.7.2 | |||
| wlan3IpImplicitStartActual OBJECT-TYPE actual assigned fourth octet | 1.3.6.1.4.1.24350.14.11.7.2.1 | INTEGER | read-only | current |
| wlan3IpImplicitStartRequested OBJECT-TYPE requested interface fourth octet (multiple of 32 plus 1) | 1.3.6.1.4.1.24350.14.11.7.2.2 | OCTET STRING | read-write | current |
| wlan3IpNetmask OBJECT-TYPE network mask | 1.3.6.1.4.1.24350.14.11.8 | OCTET STRING | read-only | current |
| wlan3IpNetmaskforce OBJECT-TYPE override .ip.netmask (or blank) | 1.3.6.1.4.1.24350.14.11.9 | OCTET STRING | read-write | current |
| wlan3Iwconfig OBJECT-IDENTITY | 1.3.6.1.4.1.24350.14.12 | |||
| wlan3IwconfigCmd OBJECT-TYPE parameters to pass to iwconfig after all other settings | 1.3.6.1.4.1.24350.14.12.1 | OCTET STRING | read-write | current |
| wlan3Iwpriv OBJECT-IDENTITY | 1.3.6.1.4.1.24350.14.13 | |||
| wlan3IwprivCmd OBJECT-TYPE parameters to pass to iwpriv after all other settings | 1.3.6.1.4.1.24350.14.13.1 | OCTET STRING | read-write | current |
| wlan3Key OBJECT-TYPE wep key - if present, overrides .keys | 1.3.6.1.4.1.24350.14.14 | OCTET STRING | read-write | current |
| wlan3Keys OBJECT-IDENTITY | 1.3.6.1.4.1.24350.14.15 | |||
| wlan3Keys1 OBJECT-TYPE one of four keys selected with .keys.default | 1.3.6.1.4.1.24350.14.15.1 | OCTET STRING | read-write | current |
| wlan3Keys2 OBJECT-TYPE one of four keys selected with .keys.default | 1.3.6.1.4.1.24350.14.15.2 | OCTET STRING | read-write | current |
| wlan3Keys3 OBJECT-TYPE one of four keys selected with .keys.default | 1.3.6.1.4.1.24350.14.15.3 | OCTET STRING | read-write | current |
| wlan3Keys4 OBJECT-TYPE one of four keys selected with .keys.default | 1.3.6.1.4.1.24350.14.15.4 | OCTET STRING | read-write | current |
| wlan3KeysDefault OBJECT-TYPE 1 to 4 to choose which of wlan3.keys.1-4 to use | 1.3.6.1.4.1.24350.14.15.5 | OCTET STRING | read-write | current |
| wlan3Mode OBJECT-TYPE operating mode ( ap/master, adhoc, adhoc-demo, sta/client ) | 1.3.6.1.4.1.24350.14.16 | OCTET STRING | read-write | current |
| wlan3Mtu OBJECT-TYPE maximum transmission unit - may cause serious problems if set too low | 1.3.6.1.4.1.24350.14.17 | INTEGER | read-write | current |
| wlan3Radio OBJECT-TYPE which physical radio this vap is on (0 or 1) | 1.3.6.1.4.1.24350.14.18 | OCTET STRING | read-write | current |
| wlan3Rate OBJECT-TYPE communications rate | 1.3.6.1.4.1.24350.14.19 | OCTET STRING | read-write | current |
| wlan3Role OBJECT-TYPE intended interface role (access, bridge) | 1.3.6.1.4.1.24350.14.20 | OCTET STRING | read-write | current |
| wlan3Routes OBJECT-IDENTITY | 1.3.6.1.4.1.24350.14.21 | |||
| wlan3RoutesStatic OBJECT-TYPE static routes for this interface | 1.3.6.1.4.1.24350.14.21.1 | OCTET STRING | read-write | current |
| wlan3Vlan OBJECT-IDENTITY | 1.3.6.1.4.1.24350.14.22 | |||
| wlan3VlanEnable OBJECT-TYPE use a vlan for this interface | 1.3.6.1.4.1.24350.14.22.1 | OCTET STRING | read-write | current |
| wlan3VlanId OBJECT-TYPE vlan id (0 and 1 are usually reserved) | 1.3.6.1.4.1.24350.14.22.2 | INTEGER | read-write | current |
| wlan3Wpa OBJECT-IDENTITY | 1.3.6.1.4.1.24350.14.23 | |||
| wlan3WpaAuth OBJECT-IDENTITY | 1.3.6.1.4.1.24350.14.23.1 | |||
| wlan3WpaAuthArgs OBJECT-TYPE arguments passed to authenticator | 1.3.6.1.4.1.24350.14.23.1.1 | OCTET STRING | read-write | current |
| wlan3WpaAuthCustom OBJECT-TYPE command used to start authenticator if .wpa.auth.type is 'custom' | 1.3.6.1.4.1.24350.14.23.1.2 | OCTET STRING | read-write | current |
| wlan3WpaAuthInternal OBJECT-TYPE 0 for external, 1 for internal | 1.3.6.1.4.1.24350.14.23.1.3 | OCTET STRING | read-write | current |
| wlan3WpaAuthServer OBJECT-IDENTITY | 1.3.6.1.4.1.24350.14.23.1.4 | |||
| wlan3WpaAuthServerAddr OBJECT-TYPE authentication server address | 1.3.6.1.4.1.24350.14.23.1.4.1 | OCTET STRING | read-write | current |
| wlan3WpaAuthServerPort OBJECT-TYPE authentication server port | 1.3.6.1.4.1.24350.14.23.1.4.2 | INTEGER | read-write | current |
| wlan3WpaAuthServerSharedsecret OBJECT-TYPE shared secret | 1.3.6.1.4.1.24350.14.23.1.4.3 | OCTET STRING | read-write | current |
| wlan3WpaAuthType OBJECT-TYPE 'hostapd' or 'custom' | 1.3.6.1.4.1.24350.14.23.1.5 | OCTET STRING | read-write | current |
| wlan3WpaBridge OBJECT-TYPE bridge if any, set by sys.l2.bridge.enable | 1.3.6.1.4.1.24350.14.23.2 | OCTET STRING | read-only | current |
| wlan3WpaCa OBJECT-IDENTITY | 1.3.6.1.4.1.24350.14.23.3 | |||
| wlan3WpaCaCert OBJECT-IDENTITY | 1.3.6.1.4.1.24350.14.23.3.1 | |||
| wlan3WpaCaCertFile OBJECT-TYPE ca_cert file | 1.3.6.1.4.1.24350.14.23.3.1.1 | OCTET STRING | read-write | current |
| wlan3WpaEapol OBJECT-IDENTITY | 1.3.6.1.4.1.24350.14.23.4 | |||
| wlan3WpaEapolVersion OBJECT-TYPE 2 is default, but some older clients need 1 | 1.3.6.1.4.1.24350.14.23.4.1 | OCTET STRING | read-write | current |
| wlan3WpaEnable OBJECT-TYPE wpa support enabled? | 1.3.6.1.4.1.24350.14.23.5 | OCTET STRING | read-write | current |
| wlan3WpaEssid OBJECT-TYPE essid for wpa authentication | 1.3.6.1.4.1.24350.14.23.6 | OCTET STRING | read-write | current |
| wlan3WpaIf OBJECT-TYPE management frame interface, same as wlan3.if | 1.3.6.1.4.1.24350.14.23.7 | OCTET STRING | read-only | current |
| wlan3WpaKeymgmt OBJECT-TYPE WPA-PSK and/or WPA-EAP | 1.3.6.1.4.1.24350.14.23.8 | OCTET STRING | read-write | current |
| wlan3WpaMode OBJECT-TYPE wpa modes: 1=wpa1, 2=wpa2, 3=both | 1.3.6.1.4.1.24350.14.23.9 | INTEGER | read-write | current |
| wlan3WpaNode OBJECT-IDENTITY | 1.3.6.1.4.1.24350.14.23.10 | |||
| wlan3WpaNodeCert OBJECT-IDENTITY | 1.3.6.1.4.1.24350.14.23.10.1 | |||
| wlan3WpaNodeCertFile OBJECT-TYPE server_cert file | 1.3.6.1.4.1.24350.14.23.10.1.1 | OCTET STRING | read-write | current |
| wlan3WpaNodeKey OBJECT-IDENTITY | 1.3.6.1.4.1.24350.14.23.10.2 | |||
| wlan3WpaNodeKeyFile OBJECT-TYPE private_key file | 1.3.6.1.4.1.24350.14.23.10.2.1 | OCTET STRING | read-write | current |
| wlan3WpaNodeKeyPassphrase OBJECT-TYPE passphrase for the node's private key | 1.3.6.1.4.1.24350.14.23.10.2.2 | OCTET STRING | read-write | current |
| wlan3WpaPairwise OBJECT-TYPE accepted cipher suites - CCMP and/or TKIP | 1.3.6.1.4.1.24350.14.23.11 | OCTET STRING | read-write | current |
| wlan3WpaPassphrase OBJECT-TYPE wpa passphrase | 1.3.6.1.4.1.24350.14.23.12 | OCTET STRING | read-write | current |
| wlan4 OBJECT-IDENTITY | 1.3.6.1.4.1.24350.15 | |||
| wlan4Acl OBJECT-IDENTITY | 1.3.6.1.4.1.24350.15.1 | |||
| wlan4AclMode OBJECT-TYPE access control list mode ( 'none', 'whitelist', 'blacklist' ) | 1.3.6.1.4.1.24350.15.1.1 | OCTET STRING | read-write | current |
| wlan4Beaconinterval OBJECT-TYPE beacon interval in milliseconds | 1.3.6.1.4.1.24350.15.2 | INTEGER | read-write | current |
| wlan4Cellid OBJECT-TYPE cell id for adhoc mode | 1.3.6.1.4.1.24350.15.3 | OCTET STRING | read-write | current |
| wlan4Dhcp OBJECT-IDENTITY | 1.3.6.1.4.1.24350.15.4 | |||
| wlan4DhcpAlwaysbroadcast OBJECT-TYPE always broadcast dhcp responses | 1.3.6.1.4.1.24350.15.4.1 | OCTET STRING | read-write | current |
| wlan4DhcpDefaultleasetime OBJECT-TYPE default dhcp lease expiration in seconds | 1.3.6.1.4.1.24350.15.4.2 | INTEGER | read-write | current |
| wlan4DhcpMaxleasetime OBJECT-TYPE maximum requestable dhcp lease expiration in seconds | 1.3.6.1.4.1.24350.15.4.3 | INTEGER | read-write | current |
| wlan4DhcpRelay OBJECT-IDENTITY | 1.3.6.1.4.1.24350.15.4.4 | |||
| wlan4DhcpRelayEnable OBJECT-TYPE use dhcp relay (if sys.dhcp.relay.enable=yes) | 1.3.6.1.4.1.24350.15.4.4.1 | OCTET STRING | read-write | current |
| wlan4DhcpReserve OBJECT-TYPE ip addresses to reserve at bottom of range for static assignments | 1.3.6.1.4.1.24350.15.4.5 | INTEGER | read-write | current |
| wlan4DhcpRole OBJECT-TYPE interface dhcp role (none, client, server) | 1.3.6.1.4.1.24350.15.4.6 | OCTET STRING | read-write | current |
| wlan4Enable OBJECT-TYPE interface is enabled | 1.3.6.1.4.1.24350.15.5 | OCTET STRING | read-write | current |
| wlan4Enhsec OBJECT-TYPE ignore clients that specify 'ANY' ssid | 1.3.6.1.4.1.24350.15.6 | OCTET STRING | read-write | current |
| wlan4Essid OBJECT-TYPE essid for this ap | 1.3.6.1.4.1.24350.15.7 | OCTET STRING | read-write | current |
| wlan4Frag OBJECT-TYPE fragmentation threshold | 1.3.6.1.4.1.24350.15.8 | OCTET STRING | read-write | current |
| wlan4Hideessid OBJECT-TYPE don't broadcast the essid | 1.3.6.1.4.1.24350.15.9 | OCTET STRING | read-write | current |
| wlan4If OBJECT-TYPE interface associated with this module | 1.3.6.1.4.1.24350.15.10 | OCTET STRING | read-only | current |
| wlan4Ip OBJECT-IDENTITY | 1.3.6.1.4.1.24350.15.11 | |||
| wlan4IpAddress OBJECT-TYPE ip address | 1.3.6.1.4.1.24350.15.11.1 | OCTET STRING | read-only | current |
| wlan4IpAddressforce OBJECT-TYPE override .ip.address (or blank) | 1.3.6.1.4.1.24350.15.11.2 | OCTET STRING | read-write | current |
| wlan4IpBroadcast OBJECT-TYPE broadcast address | 1.3.6.1.4.1.24350.15.11.3 | OCTET STRING | read-only | current |
| wlan4IpBroadcastforce OBJECT-TYPE override .ip.broadcast (or blank) | 1.3.6.1.4.1.24350.15.11.4 | OCTET STRING | read-write | current |
| wlan4IpGateway OBJECT-TYPE gateway address | 1.3.6.1.4.1.24350.15.11.5 | OCTET STRING | read-only | current |
| wlan4IpGatewayforce OBJECT-TYPE override .ip.gateway (or blank) | 1.3.6.1.4.1.24350.15.11.6 | OCTET STRING | read-write | current |
| wlan4IpImplicit OBJECT-IDENTITY | 1.3.6.1.4.1.24350.15.11.7 | |||
| wlan4IpImplicitSize OBJECT-IDENTITY | 1.3.6.1.4.1.24350.15.11.7.1 | |||
| wlan4IpImplicitSizeActual OBJECT-TYPE actual size of assigned address range | 1.3.6.1.4.1.24350.15.11.7.1.1 | INTEGER | read-only | current |
| wlan4IpImplicitSizeRequested OBJECT-TYPE requested size of address range (multiple of 32 minus 1) | 1.3.6.1.4.1.24350.15.11.7.1.2 | OCTET STRING | read-write | current |
| wlan4IpImplicitStart OBJECT-IDENTITY | 1.3.6.1.4.1.24350.15.11.7.2 | |||
| wlan4IpImplicitStartActual OBJECT-TYPE actual assigned fourth octet | 1.3.6.1.4.1.24350.15.11.7.2.1 | INTEGER | read-only | current |
| wlan4IpImplicitStartRequested OBJECT-TYPE requested interface fourth octet (multiple of 32 plus 1) | 1.3.6.1.4.1.24350.15.11.7.2.2 | OCTET STRING | read-write | current |
| wlan4IpNetmask OBJECT-TYPE network mask | 1.3.6.1.4.1.24350.15.11.8 | OCTET STRING | read-only | current |
| wlan4IpNetmaskforce OBJECT-TYPE override .ip.netmask (or blank) | 1.3.6.1.4.1.24350.15.11.9 | OCTET STRING | read-write | current |
| wlan4Iwconfig OBJECT-IDENTITY | 1.3.6.1.4.1.24350.15.12 | |||
| wlan4IwconfigCmd OBJECT-TYPE parameters to pass to iwconfig after all other settings | 1.3.6.1.4.1.24350.15.12.1 | OCTET STRING | read-write | current |
| wlan4Iwpriv OBJECT-IDENTITY | 1.3.6.1.4.1.24350.15.13 | |||
| wlan4IwprivCmd OBJECT-TYPE parameters to pass to iwpriv after all other settings | 1.3.6.1.4.1.24350.15.13.1 | OCTET STRING | read-write | current |
| wlan4Key OBJECT-TYPE wep key - if present, overrides .keys | 1.3.6.1.4.1.24350.15.14 | OCTET STRING | read-write | current |
| wlan4Keys OBJECT-IDENTITY | 1.3.6.1.4.1.24350.15.15 | |||
| wlan4Keys1 OBJECT-TYPE one of four keys selected with .keys.default | 1.3.6.1.4.1.24350.15.15.1 | OCTET STRING | read-write | current |
| wlan4Keys2 OBJECT-TYPE one of four keys selected with .keys.default | 1.3.6.1.4.1.24350.15.15.2 | OCTET STRING | read-write | current |
| wlan4Keys3 OBJECT-TYPE one of four keys selected with .keys.default | 1.3.6.1.4.1.24350.15.15.3 | OCTET STRING | read-write | current |
| wlan4Keys4 OBJECT-TYPE one of four keys selected with .keys.default | 1.3.6.1.4.1.24350.15.15.4 | OCTET STRING | read-write | current |
| wlan4KeysDefault OBJECT-TYPE 1 to 4 to choose which of wlan4.keys.1-4 to use | 1.3.6.1.4.1.24350.15.15.5 | OCTET STRING | read-write | current |
| wlan4Mode OBJECT-TYPE operating mode ( ap/master, adhoc, adhoc-demo, sta/client ) | 1.3.6.1.4.1.24350.15.16 | OCTET STRING | read-write | current |
| wlan4Mtu OBJECT-TYPE maximum transmission unit - may cause serious problems if set too low | 1.3.6.1.4.1.24350.15.17 | INTEGER | read-write | current |
| wlan4Radio OBJECT-TYPE which physical radio this vap is on (0 or 1) | 1.3.6.1.4.1.24350.15.18 | OCTET STRING | read-write | current |
| wlan4Rate OBJECT-TYPE communications rate | 1.3.6.1.4.1.24350.15.19 | OCTET STRING | read-write | current |
| wlan4Role OBJECT-TYPE intended interface role (access, bridge) | 1.3.6.1.4.1.24350.15.20 | OCTET STRING | read-write | current |
| wlan4Routes OBJECT-IDENTITY | 1.3.6.1.4.1.24350.15.21 | |||
| wlan4RoutesStatic OBJECT-TYPE static routes for this interface | 1.3.6.1.4.1.24350.15.21.1 | OCTET STRING | read-write | current |
| wlan4Vlan OBJECT-IDENTITY | 1.3.6.1.4.1.24350.15.22 | |||
| wlan4VlanEnable OBJECT-TYPE use a vlan for this interface | 1.3.6.1.4.1.24350.15.22.1 | OCTET STRING | read-write | current |
| wlan4VlanId OBJECT-TYPE vlan id (0 and 1 are usually reserved) | 1.3.6.1.4.1.24350.15.22.2 | INTEGER | read-write | current |
| wlan4Wpa OBJECT-IDENTITY | 1.3.6.1.4.1.24350.15.23 | |||
| wlan4WpaAuth OBJECT-IDENTITY | 1.3.6.1.4.1.24350.15.23.1 | |||
| wlan4WpaAuthArgs OBJECT-TYPE arguments passed to authenticator | 1.3.6.1.4.1.24350.15.23.1.1 | OCTET STRING | read-write | current |
| wlan4WpaAuthCustom OBJECT-TYPE command used to start authenticator if .wpa.auth.type is 'custom' | 1.3.6.1.4.1.24350.15.23.1.2 | OCTET STRING | read-write | current |
| wlan4WpaAuthInternal OBJECT-TYPE 0 for external, 1 for internal | 1.3.6.1.4.1.24350.15.23.1.3 | OCTET STRING | read-write | current |
| wlan4WpaAuthServer OBJECT-IDENTITY | 1.3.6.1.4.1.24350.15.23.1.4 | |||
| wlan4WpaAuthServerAddr OBJECT-TYPE authentication server address | 1.3.6.1.4.1.24350.15.23.1.4.1 | OCTET STRING | read-write | current |
| wlan4WpaAuthServerPort OBJECT-TYPE authentication server port | 1.3.6.1.4.1.24350.15.23.1.4.2 | INTEGER | read-write | current |
| wlan4WpaAuthServerSharedsecret OBJECT-TYPE shared secret | 1.3.6.1.4.1.24350.15.23.1.4.3 | OCTET STRING | read-write | current |
| wlan4WpaAuthType OBJECT-TYPE 'hostapd' or 'custom' | 1.3.6.1.4.1.24350.15.23.1.5 | OCTET STRING | read-write | current |
| wlan4WpaBridge OBJECT-TYPE bridge if any, set by sys.l2.bridge.enable | 1.3.6.1.4.1.24350.15.23.2 | OCTET STRING | read-only | current |
| wlan4WpaCa OBJECT-IDENTITY | 1.3.6.1.4.1.24350.15.23.3 | |||
| wlan4WpaCaCert OBJECT-IDENTITY | 1.3.6.1.4.1.24350.15.23.3.1 | |||
| wlan4WpaCaCertFile OBJECT-TYPE ca_cert file | 1.3.6.1.4.1.24350.15.23.3.1.1 | OCTET STRING | read-write | current |
| wlan4WpaEapol OBJECT-IDENTITY | 1.3.6.1.4.1.24350.15.23.4 | |||
| wlan4WpaEapolVersion OBJECT-TYPE 2 is default, but some older clients need 1 | 1.3.6.1.4.1.24350.15.23.4.1 | OCTET STRING | read-write | current |
| wlan4WpaEnable OBJECT-TYPE wpa support enabled? | 1.3.6.1.4.1.24350.15.23.5 | OCTET STRING | read-write | current |
| wlan4WpaEssid OBJECT-TYPE essid for wpa authentication | 1.3.6.1.4.1.24350.15.23.6 | OCTET STRING | read-write | current |
| wlan4WpaIf OBJECT-TYPE management frame interface, same as wlan4.if | 1.3.6.1.4.1.24350.15.23.7 | OCTET STRING | read-only | current |
| wlan4WpaKeymgmt OBJECT-TYPE WPA-PSK and/or WPA-EAP | 1.3.6.1.4.1.24350.15.23.8 | OCTET STRING | read-write | current |
| wlan4WpaMode OBJECT-TYPE wpa modes: 1=wpa1, 2=wpa2, 3=both | 1.3.6.1.4.1.24350.15.23.9 | INTEGER | read-write | current |
| wlan4WpaNode OBJECT-IDENTITY | 1.3.6.1.4.1.24350.15.23.10 | |||
| wlan4WpaNodeCert OBJECT-IDENTITY | 1.3.6.1.4.1.24350.15.23.10.1 | |||
| wlan4WpaNodeCertFile OBJECT-TYPE server_cert file | 1.3.6.1.4.1.24350.15.23.10.1.1 | OCTET STRING | read-write | current |
| wlan4WpaNodeKey OBJECT-IDENTITY | 1.3.6.1.4.1.24350.15.23.10.2 | |||
| wlan4WpaNodeKeyFile OBJECT-TYPE private_key file | 1.3.6.1.4.1.24350.15.23.10.2.1 | OCTET STRING | read-write | current |
| wlan4WpaNodeKeyPassphrase OBJECT-TYPE passphrase for the node's private key | 1.3.6.1.4.1.24350.15.23.10.2.2 | OCTET STRING | read-write | current |
| wlan4WpaPairwise OBJECT-TYPE accepted cipher suites - CCMP and/or TKIP | 1.3.6.1.4.1.24350.15.23.11 | OCTET STRING | read-write | current |
| wlan4WpaPassphrase OBJECT-TYPE wpa passphrase | 1.3.6.1.4.1.24350.15.23.12 | OCTET STRING | read-write | current |
| enRouteTraps OBJECT-IDENTITY | 1.3.6.1.4.1.24350.100 |
Notifications
| Name | OID | Status |
|---|---|---|
| enRouteConfigChange NOTIFICATION-TYPE This trap is triggered when any modification is done in the node configuration. Important note: modifying interface status on a node does not send a linkDown or linkUp trap to the NMS because the change occurs at a node reboot. Only a config change trap (this one) is sent. | 1.3.6.1.4.1.24350.100.0.1 | |
| enRouteConfigReset NOTIFICATION-TYPE This trap is triggered when the node configuration is reloaded | 1.3.6.1.4.1.24350.100.0.2 |