TRANGOP5830S-RU-MIB
- Registered at
- 1.3.6.1.4.1.5454.1.24
- Namespace
- trango
- Source file
TRANGOP5830S-RU-MIB- Digest
sha256:9ca96a523e66980a31b35715c9bab0f27ec8e69be3cdd05ed19ad04f127a2bd0
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
SNMPv2-CONF SNMPv2-SMI SNMPv2-TC TRANGOP5830S-RU-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| DisplayString type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| trango OBJECT-IDENTITY | 1.3.6.1.4.1.5454 | |||
| tbw OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1 | |||
| p5830sru OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.24 | |||
| rusys OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.24.1 | |||
| ruversion OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.24.1.1 | |||
| ruversionHW OBJECT-TYPE Hardware version. | 1.3.6.1.4.1.5454.1.24.1.1.1 | OCTET STRING (SIZE(2)) | read-only | mandatory |
| ruversionFW OBJECT-TYPE Main firmware version. Format: <code version>H<hardware version>D<date>. | 1.3.6.1.4.1.5454.1.24.1.1.2 | DisplayString (SIZE(0..80)) | read-only | mandatory |
| ruversionFPGA OBJECT-TYPE FPGA firmware version. | 1.3.6.1.4.1.5454.1.24.1.1.3 | OCTET STRING (SIZE(4)) | read-only | mandatory |
| ruversionFWChecksum OBJECT-TYPE Remote unit firmware checksum. | 1.3.6.1.4.1.5454.1.24.1.1.4 | OCTET STRING (SIZE(4)) | read-only | mandatory |
| ruversionFPGAChecksum OBJECT-TYPE Remote unit FPGA checksum. | 1.3.6.1.4.1.5454.1.24.1.1.5 | OCTET STRING (SIZE(4)) | read-only | mandatory |
| rusysDeviceId OBJECT-TYPE Remote unit device Id. Each remote unit in a cluster shall have unique ID. | 1.3.6.1.4.1.5454.1.24.1.2 | OCTET STRING (SIZE(6)) | read-only | mandatory |
| rusysDefOpMode OBJECT-TYPE The operation mode (on or off) the remote unit is on after reboot/power cycle. | 1.3.6.1.4.1.5454.1.24.1.3 | INTEGER {off(0), on(16)} | read-write | mandatory |
| rusysCurOpMode OBJECT-TYPE Remote unit's current operation mode. | 1.3.6.1.4.1.5454.1.24.1.4 | INTEGER {off(0), on(16)} | read-only | mandatory |
| rusysActivateOpmode OBJECT-TYPE Engage remote unit to on operation mode. | 1.3.6.1.4.1.5454.1.24.1.5 | INTEGER {deactivated(0), activated(1)} | read-write | mandatory |
| rusysReadCommStr OBJECT-TYPE SNMP agent read community string. It is used for authenticcation purpose. | 1.3.6.1.4.1.5454.1.24.1.6 | DisplayString (SIZE(0..32)) | read-write | mandatory |
| rusysWriteCommStr OBJECT-TYPE SNMP agent write community string. It is used for authentication purpose. | 1.3.6.1.4.1.5454.1.24.1.7 | DisplayString (SIZE(0..32)) | read-write | mandatory |
| ruswitches OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.24.1.8 | |||
| ruswitchesBlockBroadcastMulticast OBJECT-TYPE This switch enables or disables the blocking of Ethernet control packet except ICMP and ARP to reduce the amount of uneccessary overhead introduced to the wireless link. | 1.3.6.1.4.1.5454.1.24.1.8.1 | INTEGER {passed(0), blocked(1)} | read-write | mandatory |
| ruswitchesHTTPD OBJECT-TYPE When it is turned on, then the remote unit is accessible for configuring via web browser (e.g. IE or Nescape). | 1.3.6.1.4.1.5454.1.24.1.8.5 | INTEGER {disabled(0), enabled(1)} | read-write | mandatory |
| ruswitchesAutoScanMasterSignal OBJECT-TYPE This switch enables or disables the auto scan master unit signal operation on the remote unit only. | 1.3.6.1.4.1.5454.1.24.1.8.6 | INTEGER {disabled(0), enabled(1)} | read-write | mandatory |
| rutraffic OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.24.1.9 | |||
| rutrafficEthInOctets OBJECT-TYPE Number of octets of remote unit's payload received on Ethernet port. | 1.3.6.1.4.1.5454.1.24.1.9.1 | Counter | read-only | mandatory |
| rutrafficEthOutOctets OBJECT-TYPE Number of octets of remote unit's payload transmitted on Ethernet port. | 1.3.6.1.4.1.5454.1.24.1.9.2 | Counter | read-only | mandatory |
| rutrafficRfInOctets OBJECT-TYPE Number of octets of remote unit's payload received from RF port. | 1.3.6.1.4.1.5454.1.24.1.9.3 | Counter | read-only | mandatory |
| rutrafficRfOutOctets OBJECT-TYPE Number of octets of remote unit's payload transmitted to RF port. | 1.3.6.1.4.1.5454.1.24.1.9.4 | Counter | read-only | mandatory |
| rusysTemperature OBJECT-TYPE Current remote unit temperature value (in Celsius). | 1.3.6.1.4.1.5454.1.24.1.10 | INTEGER (-128..127) | read-only | mandatory |
| rusysUpdateFlashAndActivate OBJECT-TYPE Save system setting values to Flash and activate the settings. | 1.3.6.1.4.1.5454.1.24.1.11 | INTEGER {no(0), yes(1)} | read-write | mandatory |
| rusysReboot OBJECT-TYPE Reboot the remote unit. | 1.3.6.1.4.1.5454.1.24.1.12 | INTEGER {deactivated(0), activated(1)} | read-write | mandatory |
| ruipconfig OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.24.1.13 | |||
| ruipconfigIpAddress OBJECT-TYPE New IP address. It will be saved to non-volatile memory and activated in 5 secs. | 1.3.6.1.4.1.5454.1.24.1.13.1 | IpAddress | read-write | mandatory |
| ruipconfigSubnet OBJECT-TYPE New Subnet mask. It will be saved to non-volatile memory and activated in 5 secs. | 1.3.6.1.4.1.5454.1.24.1.13.2 | IpAddress | read-write | mandatory |
| ruipconfigDefaultGateway OBJECT-TYPE New Default gateway. It will be saved to non-volatile memory and activated in 5 secs. | 1.3.6.1.4.1.5454.1.24.1.13.3 | IpAddress | read-write | mandatory |
| rurf OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.24.2 | |||
| rurfRSSI OBJECT-TYPE Remote unit RSSI (in dBm). | 1.3.6.1.4.1.5454.1.24.2.1 | INTEGER (-128..127) | read-only | mandatory |
| rurftable OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.24.2.4 | |||
| rurftableChannel1 OBJECT-TYPE RF channel 1 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.1 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel2 OBJECT-TYPE RF channel 2 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.2 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel3 OBJECT-TYPE RF channel 3 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.3 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel4 OBJECT-TYPE RF channel 4 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.4 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel5 OBJECT-TYPE RF channel 5 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.5 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel6 OBJECT-TYPE RF channel 6 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.6 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel7 OBJECT-TYPE RF channel 7 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.7 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel8 OBJECT-TYPE RF channel 8 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.8 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel9 OBJECT-TYPE RF channel 9 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.9 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel10 OBJECT-TYPE RF channel 10 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.10 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel11 OBJECT-TYPE RF channel 11 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.11 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel12 OBJECT-TYPE RF channel 12 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.12 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel13 OBJECT-TYPE RF channel 13 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.13 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel14 OBJECT-TYPE RF channel 14 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.14 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel15 OBJECT-TYPE RF channel 15 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.15 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel16 OBJECT-TYPE RF channel 16 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.16 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel17 OBJECT-TYPE RF channel 17 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.17 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel18 OBJECT-TYPE RF channel 18 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.18 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel19 OBJECT-TYPE RF channel 19 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.19 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel20 OBJECT-TYPE RF channel 20 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.20 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel21 OBJECT-TYPE RF channel 21 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.21 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel22 OBJECT-TYPE RF channel 22 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.22 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel23 OBJECT-TYPE RF channel 23 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.23 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel24 OBJECT-TYPE RF channel 24 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.24 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel25 OBJECT-TYPE RF channel 25 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.25 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel26 OBJECT-TYPE RF channel 26 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.26 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel27 OBJECT-TYPE RF channel 27 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.27 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel28 OBJECT-TYPE RF channel 28 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.28 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel29 OBJECT-TYPE RF channel 29 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.29 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| rurftableChannel30 OBJECT-TYPE RF channel 30 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.24.2.4.30 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| ruism OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.24.2.5 | |||
| ruismTxPowerMax OBJECT-TYPE The maximum ISM Tx power value can be set (in dBm). | 1.3.6.1.4.1.5454.1.24.2.5.1 | INTEGER (-128..127) | read-only | mandatory |
| ruismTxPowerMin OBJECT-TYPE The minimum ISM Tx power value can be set (in dBm). | 1.3.6.1.4.1.5454.1.24.2.5.2 | INTEGER (-128..127) | read-only | mandatory |
| ruismTxPower OBJECT-TYPE ISM RF tx power (in dBm). It specifies the power output of the radio, excluding the antenna gain. Check parameters remoteismTxPowerMax and remoteismTxPowerMin for power setting range. | 1.3.6.1.4.1.5454.1.24.2.5.3 | INTEGER (-128..127) | read-write | mandatory |
| ruismRxThreshold OBJECT-TYPE ISM RF rx threshold (in dBm). It specifies the receiver sensitivity of the remote. By default, the radio's sensitivity is -82dBm. The higher the threshold is, the less sensitive the radio will be. In M5800S, the value -90 represents the rfrxthreshold is disabled. | 1.3.6.1.4.1.5454.1.24.2.5.4 | INTEGER (-90 | -85 | -80 | -75 | -70 | -65) | read-write | mandatory |
| ruunii OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.24.2.6 | |||
| ruuniiTxPowerMax OBJECT-TYPE This object is only applicable to M5830S/P5830S radio. The maximum UNII Tx power value can be set (in dBm). | 1.3.6.1.4.1.5454.1.24.2.6.1 | INTEGER (-128..127) | read-only | mandatory |
| ruuniiTxPowerMin OBJECT-TYPE This object is only applicable to M5830S/P5830S radio. The minimum UNII Tx power value can be set (in dBm). | 1.3.6.1.4.1.5454.1.24.2.6.2 | INTEGER (-128..127) | read-only | mandatory |
| ruuniiTxPower OBJECT-TYPE This object is only applicable to M5830S/P5830S radio. UNII RF tx power (in dBm). It specifies the power output of the radio, excluding the antenna gain. Check parameters apuniiTxPowerMax and apuniiTxPowerMin for power setting range. | 1.3.6.1.4.1.5454.1.24.2.6.3 | INTEGER (-128..127) | read-write | mandatory |
| ruuniiRxThreshold OBJECT-TYPE This object is only applicable to M5830S/P5830S radio. UNII RF rx threshold (in dBm). It specifies the receiver sensitivity of the master unit. | 1.3.6.1.4.1.5454.1.24.2.6.4 | INTEGER (-90 | -85 | -80 | -75 | -70 | -65) | read-write | mandatory |
| mibinfo OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.24.5 | |||
| mibinfoVersion OBJECT-TYPE Trango remote unit MIB Version. | 1.3.6.1.4.1.5454.1.24.5.1 | DisplayString (SIZE(0..32)) | read-only | mandatory |