TRANGOP5830S-MU-MIB
- Registered at
- 1.3.6.1.4.1.5454.1.22
- Namespace
- trango
- Source file
TRANGOP5830S-MU-MIB- Digest
sha256:5772fc75ae937e359e0e7ffb0fd9c1151056bf272a3503fa7a6ece9a5004676d
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
SNMPv2-CONF SNMPv2-SMI SNMPv2-TC TRANGOP5830S-MU-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| DisplayString type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| trango OBJECT-IDENTITY | 1.3.6.1.4.1.5454 | |||
| tbw OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1 | |||
| p5830smu OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.22 | |||
| musys OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.22.1 | |||
| muversion OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.22.1.1 | |||
| muversionHW OBJECT-TYPE Hardware version. | 1.3.6.1.4.1.5454.1.22.1.1.1 | OCTET STRING (SIZE(2)) | read-only | mandatory |
| muversionFW OBJECT-TYPE Main firmware version. Format: <code version>H<hardware version>D<date>. | 1.3.6.1.4.1.5454.1.22.1.1.2 | DisplayString (SIZE(0..80)) | read-only | mandatory |
| muversionFPGA OBJECT-TYPE FPGA firmware version. | 1.3.6.1.4.1.5454.1.22.1.1.3 | OCTET STRING (SIZE(4)) | read-only | mandatory |
| muversionFWChecksum OBJECT-TYPE Master unit firmware checksum. | 1.3.6.1.4.1.5454.1.22.1.1.4 | OCTET STRING (SIZE(4)) | read-only | mandatory |
| muversionFPGAChecksum OBJECT-TYPE Master unit FPGA checksum. | 1.3.6.1.4.1.5454.1.22.1.1.5 | OCTET STRING (SIZE(4)) | read-only | mandatory |
| musysDeviceId OBJECT-TYPE Master unit device Id. Each master unit in a cluster shall have unique ID. | 1.3.6.1.4.1.5454.1.22.1.2 | OCTET STRING (SIZE(6)) | read-only | mandatory |
| musysDefOpMode OBJECT-TYPE The operation mode (on or off) the master unit is on after reboot/power cycle. | 1.3.6.1.4.1.5454.1.22.1.3 | INTEGER {off(0), on(16)} | read-write | mandatory |
| musysCurOpMode OBJECT-TYPE Master unit's current operation mode. | 1.3.6.1.4.1.5454.1.22.1.4 | INTEGER {off(0), on(16)} | read-only | mandatory |
| musysActivateOpmode OBJECT-TYPE Engage master unit to on operation mode. | 1.3.6.1.4.1.5454.1.22.1.5 | INTEGER {deactivated(0), activated(1)} | read-write | mandatory |
| musysReadCommStr OBJECT-TYPE SNMP agent read community string. It is used for authentication purpose. | 1.3.6.1.4.1.5454.1.22.1.6 | DisplayString (SIZE(0..32)) | read-write | mandatory |
| musysWriteCommStr OBJECT-TYPE SNMP agent write community string. It is used for authentication purpose. | 1.3.6.1.4.1.5454.1.22.1.7 | DisplayString (SIZE(0..32)) | read-write | mandatory |
| muswitches OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.22.1.8 | |||
| muswitchesBlockBroadcastMulticast OBJECT-TYPE This switch enables or disables the blocking of Ethernet control packet except ICMP and ARP to reduce the amount of uneccessary overhead introduced to the wireless link. | 1.3.6.1.4.1.5454.1.22.1.8.1 | INTEGER {passed(0), blocked(1)} | read-write | mandatory |
| muswitchesHTTPD OBJECT-TYPE When it is turned on, then the master unit is accessible for configuring via web browser (e.g. IE or Nescape). | 1.3.6.1.4.1.5454.1.22.1.8.5 | INTEGER {disabled(0), enabled(1)} | read-write | mandatory |
| muswitchesAutoPowerLevelRemoteUnit OBJECT-TYPE When it is turned on, then the master unit will command the remote unit to do power leveling. | 1.3.6.1.4.1.5454.1.22.1.8.7 | INTEGER {disabled(0), enabled(1)} | read-write | mandatory |
| mutraffic OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.22.1.9 | |||
| mutrafficEthInOctets OBJECT-TYPE Number of payload octets received on Ethernet port. | 1.3.6.1.4.1.5454.1.22.1.9.1 | Counter | read-only | mandatory |
| mutrafficEthOutOctets OBJECT-TYPE Number of payload octets transmitted on Ethernet port. | 1.3.6.1.4.1.5454.1.22.1.9.2 | Counter | read-only | mandatory |
| mutrafficRfInOctets OBJECT-TYPE Number of octets of remote's payload received from RF port. | 1.3.6.1.4.1.5454.1.22.1.9.3 | Counter | read-only | mandatory |
| mutrafficRfOutOctets OBJECT-TYPE Number of octets of remote's payload transmitted to RF port. | 1.3.6.1.4.1.5454.1.22.1.9.4 | Counter | read-only | mandatory |
| musysTemperature OBJECT-TYPE Current master unit's temperature value (in Celsius). | 1.3.6.1.4.1.5454.1.22.1.10 | INTEGER (-128..127) | read-only | mandatory |
| musysUpdateFlashAndActivate OBJECT-TYPE Save system setting values to Flash and activate the settings. | 1.3.6.1.4.1.5454.1.22.1.11 | INTEGER {no(0), yes(1)} | read-write | mandatory |
| musysReboot OBJECT-TYPE Reboot the master unit. | 1.3.6.1.4.1.5454.1.22.1.12 | INTEGER {deactivated(0), activated(1)} | read-write | mandatory |
| muipconfig OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.22.1.13 | |||
| muipconfigIpAddress OBJECT-TYPE New IP address. It will be saved to non-volatile memory and activated in 5 secs. | 1.3.6.1.4.1.5454.1.22.1.13.1 | IpAddress | read-write | mandatory |
| muipconfigSubnet OBJECT-TYPE New Subnet mask. It will be saved to non-volatile memory and activated in 5 secs. | 1.3.6.1.4.1.5454.1.22.1.13.2 | IpAddress | read-write | mandatory |
| muipconfigDefaultGateway OBJECT-TYPE New Default gateway. It will be saved to non-volatile memory and activated in 5 secs. | 1.3.6.1.4.1.5454.1.22.1.13.3 | IpAddress | read-write | mandatory |
| murf OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.22.2 | |||
| murfRSSI OBJECT-TYPE Remote unit RSSI (in dBm). | 1.3.6.1.4.1.5454.1.22.2.1 | INTEGER (-128..127) | read-only | mandatory |
| murfActiveChannel OBJECT-TYPE It specifies the current channel number the master unit operates on. | 1.3.6.1.4.1.5454.1.22.2.2 | INTEGER (1..30) | read-write | mandatory |
| murfActivePolarization OBJECT-TYPE It specifies the current polarization the master unit operates on. | 1.3.6.1.4.1.5454.1.22.2.3 | DisplayString (SIZE(1)) | read-write | mandatory |
| murftable OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.22.2.4 | |||
| murftableChannel1 OBJECT-TYPE RF channel 1 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.1 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel2 OBJECT-TYPE RF channel 2 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.2 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel3 OBJECT-TYPE RF channel 3 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.3 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel4 OBJECT-TYPE RF channel 4 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.4 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel5 OBJECT-TYPE RF channel 5 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.5 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel6 OBJECT-TYPE RF channel 6 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.6 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel7 OBJECT-TYPE RF channel 7 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.7 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel8 OBJECT-TYPE RF channel 8 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.8 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel9 OBJECT-TYPE RF channel 9 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.9 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel10 OBJECT-TYPE RF channel 10 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.10 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel11 OBJECT-TYPE RF channel 11 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.11 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel12 OBJECT-TYPE RF channel 12 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.12 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel13 OBJECT-TYPE RF channel 13 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.13 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel14 OBJECT-TYPE RF channel 14 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.14 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel15 OBJECT-TYPE RF channel 15 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.15 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel16 OBJECT-TYPE RF channel 16 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.16 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel17 OBJECT-TYPE RF channel 17 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.17 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel18 OBJECT-TYPE RF channel 18 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.18 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel19 OBJECT-TYPE RF channel 19 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.19 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel20 OBJECT-TYPE RF channel 20 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.20 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel21 OBJECT-TYPE RF channel 21 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.21 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel22 OBJECT-TYPE RF channel 22 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.22 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel23 OBJECT-TYPE RF channel 23 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.23 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel24 OBJECT-TYPE RF channel 24 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.24 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel25 OBJECT-TYPE RF channel 25 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.25 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel26 OBJECT-TYPE RF channel 26 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.26 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel27 OBJECT-TYPE RF channel 27 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.27 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel28 OBJECT-TYPE RF channel 28 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.28 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel29 OBJECT-TYPE RF channel 29 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.29 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| murftableChannel30 OBJECT-TYPE RF channel 30 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio. | 1.3.6.1.4.1.5454.1.22.2.4.30 | INTEGER (5260..5340 | 5736..5836) | read-write | mandatory |
| muism OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.22.2.5 | |||
| muismTxPowerMax OBJECT-TYPE The maximum ISM Tx power value can be set (in dBm). | 1.3.6.1.4.1.5454.1.22.2.5.1 | INTEGER (-128..127) | read-only | mandatory |
| muismTxPowerMin OBJECT-TYPE The minimum ISM Tx power value can be set (in dBm). | 1.3.6.1.4.1.5454.1.22.2.5.2 | INTEGER (-128..127) | read-only | mandatory |
| muismTxPower OBJECT-TYPE ISM RF tx power (in dBm). It specifies the power output of the radio, excluding the antenna gain. Check parameters muismTxPowerMax and masterismTxPowerMin for power setting range. | 1.3.6.1.4.1.5454.1.22.2.5.3 | INTEGER (-128..127) | read-write | mandatory |
| muismRxThreshold OBJECT-TYPE ISM RF rx threshold (in dBm). It specifies the receiver sensitivity of the master. By default, the radio's sensitivity is -82dBm. The higher the threshold is, the less sensitive the radio will be. In M5800S, the value -90 represents the rfrxthreshold is disabled. | 1.3.6.1.4.1.5454.1.22.2.5.4 | INTEGER (-90 | -85 | -80 | -75 | -70 | -65) | read-write | mandatory |
| muismTargetRSSI OBJECT-TYPE ISM RF RSSI (in dBm). It specifies the target RSSI from the remote unit to the master unit. Based on this parameter, the master unit can power level the remote unit so that it receives same level of signal strength from the remote unit, regardless far or near. Note that when you set the Target RSSI from the remote unit, you need to consider master unit's RF Rx Threshold value. The Target RSSI from the remote unit must be 5dB higher than the RF Rx Threshold. When the RF Rx Threshold is disabled, the setting of the Target RSSI from remote unit shall be no less than -75dBm. | 1.3.6.1.4.1.5454.1.22.2.5.5 | INTEGER (-85..-45) | read-write | mandatory |
| muunii OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.22.2.6 | |||
| muuniiTxPowerMax OBJECT-TYPE This object is only applicable to M5830S/P5830S radio. The maximum UNII Tx power value can be set (in dBm). | 1.3.6.1.4.1.5454.1.22.2.6.1 | INTEGER (-128..127) | read-only | mandatory |
| muuniiTxPowerMin OBJECT-TYPE This object is only applicable to M5830S/P5830S radio. The minimum UNII Tx power value can be set (in dBm). | 1.3.6.1.4.1.5454.1.22.2.6.2 | INTEGER (-128..127) | read-only | mandatory |
| muuniiTxPower OBJECT-TYPE This object is only applicable to M5830S/P5830S radio. UNII RF tx power (in dBm). It specifies the power output of the radio, excluding the antenna gain. Check parameters apuniiTxPowerMax and apuniiTxPowerMin for power setting range. | 1.3.6.1.4.1.5454.1.22.2.6.3 | INTEGER (-128..127) | read-write | mandatory |
| muuniiRxThreshold OBJECT-TYPE This object is only applicable to M5830S/P5830S radio. UNII RF rx threshold (in dBm). It specifies the receiver sensitivity of the master. | 1.3.6.1.4.1.5454.1.22.2.6.4 | INTEGER (-90 | -85 | -80 | -75 | -70 | -65) | read-write | mandatory |
| muuniiTargetRSSI OBJECT-TYPE This object is only applicable to M5830S/P5830S radio. UNII RF target RSSI (in dBm). It specifies the target RSSI from remote unit to the master unit. Based on this parameter, the master can power level the remote unit so that it receives same level of signal strength from the remote unit, regardless far or near. Note that when you set the Target RSSI from the remote unit, you need to consider remote unit's RF Rx Threshold value. The Target RSSI from the remote unit must be 5dB higher than the RF Rx Threshold. | 1.3.6.1.4.1.5454.1.22.2.6.5 | INTEGER (-85..-45) | read-write | mandatory |
| ru OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.22.3 | |||
| ruDeviceId OBJECT-TYPE Remote unit device ID. | 1.3.6.1.4.1.5454.1.22.3.1 | OCTET STRING (SIZE(4)) | read-write | mandatory |
| ruUpstreamMIR OBJECT-TYPE It is the Maximum Information Rate (in Kbps) the master unit allocates to remote unit. | 1.3.6.1.4.1.5454.1.22.3.2 | INTEGER (100..10000) | read-write | mandatory |
| remoteDownstreamMIR OBJECT-TYPE It is the Maximum Information Rate (in Kbps) the master unit allocates to the remote unit. | 1.3.6.1.4.1.5454.1.22.3.3 | INTEGER (100..10000) | read-write | mandatory |
| ruPowerLvl OBJECT-TYPE It is a feature that is typically found in more elaborate mobile systems such as cellular CDMA networks. Using this feature, the remote unit have its RF power output adjusted until its signal strength received in the master unit is roughly the same. | 1.3.6.1.4.1.5454.1.22.3.4 | INTEGER {deactivated(0), activated(1)} | read-write | mandatory |
| ruReboot OBJECT-TYPE Master unit issues reboot command to remote unit. | 1.3.6.1.4.1.5454.1.22.3.5 | INTEGER {deactivated(0), activated(1)} | read-write | mandatory |
| ruAssociation OBJECT-TYPE Remote unit association status. | 1.3.6.1.4.1.5454.1.22.3.6 | INTEGER {notAssociated(0), associated(1)} | read-only | mandatory |
| ruDistance OBJECT-TYPE Distance of remote unit (in mile). | 1.3.6.1.4.1.5454.1.22.3.7 | INTEGER (0..40) | read-only | mandatory |
| trapconfig OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.22.4 | |||
| trapconfigDest1IPAddress OBJECT-TYPE Trap destination 1 IP address. | 1.3.6.1.4.1.5454.1.22.4.2 | IpAddress | read-write | mandatory |
| trapconfigDest2IPAddress OBJECT-TYPE Trap destination 2 IP address. | 1.3.6.1.4.1.5454.1.22.4.3 | IpAddress | read-write | mandatory |
| mibinfo OBJECT-IDENTITY | 1.3.6.1.4.1.5454.1.22.5 | |||
| mibinfoVersion OBJECT-TYPE Trango master unit MIB Version. | 1.3.6.1.4.1.5454.1.22.5.1 | DisplayString (SIZE(0..32)) | read-only | mandatory |