TPLINK-IPV6ADDR-MIB
- Registered at
- 1.3.6.1.4.1.11863.6.50
- Last updated
- 2015-12-13 09:30
- Organization
- TPLINK
- Revisions
- 2012-12-13 09:30
- Namespace
- tplink
- Source file
TPLINK-IPV6ADDR-MIB- Digest
sha256:05e7b241e340d431697c30e3cae62ba0a111aa0eefe6e44df31f765f58ce00c1
Description
Private MIB for IPv6 address configuration.
Contact
www.tplink.com
Imports
| From | Symbols |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION |
| TPLINK-MIB | tplinkMgmt |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
INET-ADDRESS-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC TPLINK-IPV6ADDR-MIB TPLINK-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| tplinkIpv6AddrMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11863.6.50.1 | |||
| ipv6ParaConfigAddrTable OBJECT-TYPE The table of address information is relevant to the switch's IPv6 addresses. | 1.3.6.1.4.1.11863.6.50.1.1 | not-accessible | current | |
| ipv6ParaConfigAddrEntry OBJECT-TYPE Define the IPv6 address information. | 1.3.6.1.4.1.11863.6.50.1.1.1 | not-accessible | current | |
| ipv6ParaConfigIfIndex OBJECT-TYPE The IfIndex of the interface | 1.3.6.1.4.1.11863.6.50.1.1.1.1 | INTEGER | read-only | current |
| ipv6ParaConfigIfDescription OBJECT-TYPE The description of the interface. | 1.3.6.1.4.1.11863.6.50.1.1.1.2 | DisplayString | read-only | current |
| ipv6ParaConfigAddrType OBJECT-TYPE The IP address type of the switch. The value must be ipv6. | 1.3.6.1.4.1.11863.6.50.1.1.1.3 | InetAddressType | read-only | current |
| ipv6ParaConfigAddress OBJECT-TYPE The IPv6 address of the switch. | 1.3.6.1.4.1.11863.6.50.1.1.1.4 | InetAddress | read-only | current |
| ipv6ParaConfigPrefixLength OBJECT-TYPE The length of the prefix (in bits) associated with the IPv6 address of the switch. | 1.3.6.1.4.1.11863.6.50.1.1.1.5 | INTEGER (1..128) | read-create | current |
| ipv6ParaConfigSourceType OBJECT-TYPE Indicate the type of source of IPv6 address. The value can be one of following: 'assignedIp': Assigned global/site-local IPv6 address; 'assignedEUI64Ip': Assigned global/site-local IPv6 address by using EUI-64 interface identifier; 'assignedLinklocalIp': Assigned link-local IPv6 address. 'autoIp': Auto generated IPv6 address as a result of non-linklocal anycast/unicast address configuration; 'dhcpv6': Assigned IPv6 address through DHCPv6 protocol; 'negotiate': Assigned IPv6 address through negotiation; | 1.3.6.1.4.1.11863.6.50.1.1.1.6 | INTEGER {assignedIp(1), assignedEUI64Ip(2), assignedLinklocalIp(3), autoIp(4), dhcpv6(5), negotiate(6)} | read-only | current |
| ipv6ParaConfigRowStatus OBJECT-TYPE the following values are states: these values may be used as follow: active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),destory the entry. createAndGo(4),not being used createAndWait(5),creat a new entry destroy(6),destory the entry. When you create a new user,the default password is admin. | 1.3.6.1.4.1.11863.6.50.1.1.1.7 | RowStatus | read-create | current |
| ipv6ParaConfigCfgTable OBJECT-TYPE The table of configuration information is relevant to the switch's IPv6 addresses. | 1.3.6.1.4.1.11863.6.50.1.2 | not-accessible | current | |
| ipv6ParaConfigCfgEntry OBJECT-TYPE Define the IPv6 address information. | 1.3.6.1.4.1.11863.6.50.1.2.1 | not-accessible | current | |
| ipv6ParaConfigCfgIfIndex OBJECT-TYPE The IfIndex of the interface | 1.3.6.1.4.1.11863.6.50.1.2.1.1 | INTEGER | read-only | current |
| ipv6ParaConfigCfgIfDescription OBJECT-TYPE The description of the interface. | 1.3.6.1.4.1.11863.6.50.1.2.1.2 | DisplayString | read-only | current |
| ipv6ParaConfigAutoLinkLocalEnable OBJECT-TYPE 0. disable 1. enable Enable/Disable IPv6 link-local address auto configuration mode. | 1.3.6.1.4.1.11863.6.50.1.2.1.3 | INTEGER {disable(0), enable(1)} | read-write | current |
| ipv6ParaConfigDhcpEnable OBJECT-TYPE 0. disable 1. enable Enable/Disable IPv6 global address auto configuration via DHCPv6 Server. | 1.3.6.1.4.1.11863.6.50.1.2.1.4 | INTEGER {disable(0), enable(1)} | read-write | current |
| ipv6ParaConfigNegotiateEnable OBJECT-TYPE 0. disable 1. enable Enable/Disable IPv6 global address auto configuration via RA message. | 1.3.6.1.4.1.11863.6.50.1.2.1.5 | INTEGER {disable(0), enable(1)} | read-write | current |
| ipv6ParaConfigIPv6Enable OBJECT-TYPE 0. disable 1. enable Enable/Disable IPv6 function on the interface of switch. | 1.3.6.1.4.1.11863.6.50.1.2.1.6 | INTEGER {disable(0), enable(1)} | read-write | current |
| ipv6GatewayConfig OBJECT-IDENTITY | 1.3.6.1.4.1.11863.6.50.1.3 | |||
| ipv6Gateway OBJECT-TYPE The gateway of the ipv6 interface. Set '0' to delete the gateway. | 1.3.6.1.4.1.11863.6.50.1.3.1 | OCTET STRING (SIZE(46)) | read-write | current |
| tplinkIpv6RoutingConfig OBJECT-IDENTITY | 1.3.6.1.4.1.11863.6.50.2 | |||
| tpIpv6Routing OBJECT-TYPE 0. disable 1. enable | 1.3.6.1.4.1.11863.6.50.2.1 | INTEGER {disable(0), enable(1)} | read-write | current |
| tplinkIpv6AddrNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.11863.6.50.3 |