TIMETRA-ETH-TUNNEL-MIB
- Registered at
- 1.3.6.1.4.1.6527.1.1.3.641.3.6.1.4.1.6527.3.1.1.641.3.6.1.4.1.6527.3.1.2.641.3.6.1.4.1.6527.3.1.3.64
- Last updated
- 1909-02-28 00:00
- Organization
- Alcatel-Lucent
- Revisions
- 1909-02-28 00:00
- Namespace
- nokia
- Source file
TIMETRA-ETH-TUNNEL-MIB- Digest
sha256:26918f6abc3c7ccdbe3a58751a4919caf7a44b2d9dab4a591e3a5064050b3377
Description
This document is the SNMP MIB module to manage and provision the Ethernet Tunnel components of the Alcatel-Lucent SROS device. Copyright (c) 2009-2011 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Contact
Alcatel-Lucent SROS Support Web: http://support.alcatel-lucent.com
Imports
| From | Symbols |
|---|---|
| IF-MIB | InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
| TIMETRA-CHASSIS-MIB | TmnxChassisIndex |
| TIMETRA-GLOBAL-MIB | timetraSRMIBModules, tmnxSRConfs, tmnxSRNotifyPrefix, tmnxSRObjs |
| TIMETRA-SAP-MIB | sapEncapValue, sapPortId |
| TIMETRA-SERV-MIB | svcId |
| TIMETRA-TC-MIB | TItemDescription, TmnxAdminState, TmnxEncapVal, TmnxOperState |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ATM-TC-MIB IANAifType-MIB IEEE8021-PAE-MIB IF-MIB INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TIMETRA-CHASSIS-MIB TIMETRA-ETH-TUNNEL-MIB TIMETRA-FILTER-MIB TIMETRA-GLOBAL-MIB TIMETRA-PORT-MIB TIMETRA-QOS-MIB TIMETRA-SAP-MIB TIMETRA-SERV-MIB TIMETRA-TC-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| TmnxEthTunnelApsPduType TEXTUAL-CONVENTION The TmnxEthTunnelApsPduType specifies the 4 byte APS-specific information within each APS PDU. The information is encoded as shown below. 32 29|28 25|24 17|16 9|8 1| +-------+---------+--------+--------+--------+ |Request|Prot.Type|Request |Bridge |Reserved| | State| A|B|D|R | Signal| Signal| | +-------+---------+--------+--------+--------+ | current | |||
| TmnxEthTunnelIndex TEXTUAL-CONVENTION The TmnxEthTunnelIndex specifies the unique Ethernet Tunnel Identifier for an Ethernet Tunnel Group. The value of zero (0) is only used by objects which may reference a tmnxEthTunnelConfigEntry. The value zero (0) is an invalid index that specifies that the object is not associated with any Ethernet Tunnel Group. | current | |||
| TmnxEthTunnelMemberIndex TEXTUAL-CONVENTION The TmnxEthTunnelMemberIndex specifies the unique Ethernet Tunnel Member Identifier. Along with an Object of type TmnxEthTunnelIndex, an Object of this type references a specific member on a specific ethernet tunnel group. The value of zero (0), is only used by objects which may reference a tmnxEthTunnelMemberEntry. The value of zero (0) is an invalid index that specifies that the object is not associated with any Ethernet Tunnel Member. | current | |||
| TmnxEthTunnelMemberList TEXTUAL-CONVENTION The TmnxEthTunnelMemberList specifies a bit-mask of the members associated with a particular object. Each bit represents a specific tmnxEthTunnelMemberEntry. Bit 0 (first bit) represents the member with the tmnxEthTunnelMemberIndex value of 1. Bit 1, represents the member with the tmnxEthTunnelMemberIndex value of 2, and so forth. member1 (0) -- represents member 1. member2 (1) -- represents member 2. etc. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| tmnxEthTunnelConformance OBJECT-IDENTITY | 1.3.6.1.4.1.6527.3.1.1.64 | |||
| tmnxEthTunnelCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.6527.3.1.1.64.1 | |||
| tmnxEthTunnelGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6527.3.1.1.64.2 | |||
| tmnxEthTunnelTSGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6527.3.1.1.64.2.0 | |||
| tmnxEthTunnelConfigGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6527.3.1.1.64.2.1 | |||
| tmnxEthTunnelOperGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6527.3.1.1.64.2.2 | |||
| tmnxEthTunnelMemberGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6527.3.1.1.64.2.3 | |||
| tmnxEthTunnelAPSGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6527.3.1.1.64.2.4 | |||
| tmnxEthTunnelNotifyGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6527.3.1.1.64.2.5 | |||
| tmnxEthTunnelSAPGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6527.3.1.1.64.2.6 | |||
| tmnxEthTunnelLEGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6527.3.1.1.64.2.7 | |||
| tmnxEthTunnelObjs OBJECT-IDENTITY | 1.3.6.1.4.1.6527.3.1.2.64 | |||
| tmnxEthTunnelConfigTimeStamps OBJECT-IDENTITY | 1.3.6.1.4.1.6527.3.1.2.64.0 | |||
| tmnxEthTunnelCfgTblLastChanged OBJECT-TYPE The tmnxEthTunnelCfgTblLastChanged indicates the time, since system startup, when a row in the tmnxEthTunnelConfigTable last changed. | 1.3.6.1.4.1.6527.3.1.2.64.0.1 | TimeStamp | read-only | current |
| tmnxEthTunnelMbrTblLastChanged OBJECT-TYPE The tmnxEthTunnelMbrTblLastChanged indicates the time, since system startup, when a row in the tmnxEthTunnelMemberTable last changed. | 1.3.6.1.4.1.6527.3.1.2.64.0.2 | TimeStamp | read-only | current |
| tmnxEthTunnelLETableChanged OBJECT-TYPE The value of tmnxEthTunnelLETableChanged indicates the time, since system startup, when a row in the tmnxEthTunnelLETable last changed. | 1.3.6.1.4.1.6527.3.1.2.64.0.3 | TimeStamp | read-only | current |
| tmnxEthTunnelSAPMbrTblChanged OBJECT-TYPE The tmnxEthTunnelSAPMbrTblChanged indicates the time, since system startup, when a row in the tmnxEthTunnelSAPMemberTable last changed. | 1.3.6.1.4.1.6527.3.1.2.64.0.4 | TimeStamp | read-only | current |
| tmnxEthTunnelConfigurations OBJECT-IDENTITY | 1.3.6.1.4.1.6527.3.1.2.64.1 | |||
| tmnxEthTunnelConfigTable OBJECT-TYPE The tmnxEthTunnelConfigTable consists of the Ethernet Tunnel Group configuration information. | 1.3.6.1.4.1.6527.3.1.2.64.1.1 | not-accessible | current | |
| tmnxEthTunnelConfigEntry OBJECT-TYPE The tmnxEthTunnelConfigEntry contains information pertaining to an individual Ethernet Tunnel Group. Rows in this table are created and destroyed using the tmnxEthTunnelRowStatus object. A corresponding row in the tmnxPortTable will exist for each row in this table, based on the tmnxEthTunnelOperEntry tmnxEthTunnelChassisIndex and tmnxEthTunnelIfIndex object pair. The tmnxPortEntry corresponding to this entry manages the administration, description, MAC address and other port related configuration. | 1.3.6.1.4.1.6527.3.1.2.64.1.1.1 | not-accessible | current | |
| tmnxEthTunnelIndex OBJECT-TYPE The tmnxEthTunnelIndex specifies the row index of the Ethernet Tunnel Group. | 1.3.6.1.4.1.6527.3.1.2.64.1.1.1.1 | TmnxEthTunnelIndex (1..4294967295) | not-accessible | current |
| tmnxEthTunnelRowStatus OBJECT-TYPE The tmnxEthTunnelRowStatus controls the creation and deletion of row entries in the tmnxEthTunnelConfigTable. A corresponding row in the tmnxPortTable is created by the system when a tmnxEthTunnelRowStatus value of 'createAndGo (4)' is issued on a new row in the tmnxEthTunnelConfigTable. The corresponding row in the tmnxPortTable will be destroyed by the system when the tmnxEthTunnelRowStatus value of 'destroy (6)' is issued. | 1.3.6.1.4.1.6527.3.1.2.64.1.1.1.2 | RowStatus | read-create | current |
| tmnxEthTunnelTimeStamp OBJECT-TYPE The tmnxEthTunnelTimeStamp indicates the time, since system startup, of the last change to this row. | 1.3.6.1.4.1.6527.3.1.2.64.1.1.1.3 | TimeStamp | read-only | current |
| tmnxEthTunnelHoldDownTimeMember OBJECT-TYPE The value of tmnxEthTunnelHoldDownTimeMember specifies the time, in centiseconds, used for the hold-timer for associated Continuity Check (CC) Session down event dampening. This guards against reporting excessive member operational state transitions. This is implemented by not advertising subsequent transitions of the CC state to the Ethernet Tunnel Group until the configured timer has expired. A value of zero (0) specifies that a down transition is reported immediately. | 1.3.6.1.4.1.6527.3.1.2.64.1.1.1.4 | Unsigned32 (0..1000) | read-create | current |
| tmnxEthTunnelProtectionType OBJECT-TYPE The value of tmnxEthTunnelProtectionType specifies the model used for determining which members are actively receiving and transmitting data. When the value is set to 'g8031-1to1 (1)', as per G.8031 spec, only two members are allowed, and only one of them can be active at one point in time. When the value is set to 'loadsharing (2)', multiple members can be active at one point in time. The value of tmnxEthTunnelProtectionType can only be changed when the corresponding tmnxPortEntry row object tmnxPortAdminStatus is set to 'outOfService (3)' | 1.3.6.1.4.1.6527.3.1.2.64.1.1.1.5 | INTEGER {g8031-1to1(1), loadsharing(2)} | read-create | current |
| tmnxEthTunnelRevertTime OBJECT-TYPE The value of tmnxEthTunnelRevertTime specifies the time, in seconds, that the tunnel waits to restore the working member. A value of zero (0) sets the behavior of the Ethernet Tunnel Group to be non-revertive, while a positive value specifies the wait time. After clearing of a condition that necessitated an automatic switch, the wait to restore period, indicated by reading the tmnxEthTunnelRevertTimeCountDn object, must elapse before reverting. This is intended to avoid rapid switch oscillations. This object is only applicable when the tmnxEthTunnelProtectionType is set to 'g8031-1to1 (1)'. | 1.3.6.1.4.1.6527.3.1.2.64.1.1.1.6 | Unsigned32 (0 | 1..720) | read-create | current |
| tmnxEthTunnelHoldUpTimeMember OBJECT-TYPE The value of tmnxEthTunnelHoldUpTimeMember specifies the time, in deciseconds, used for the hold-timer for associated Continuity Check (CC) Session up event dampening. This guards against reporting excessive member operational state transitions. This is implemented by not advertising subsequent transitions of the CC state to the Ethernet Tunnel Group until the configured timer has expired. A value of zero (0) specifies that an up transition is reported immediately. | 1.3.6.1.4.1.6527.3.1.2.64.1.1.1.7 | Unsigned32 (0..5000) | read-create | current |
| tmnxEthTunnelOperTable OBJECT-TYPE The tmnxEthTunnelOperTable consists of the Ethernet Tunnel Group operational information. This table augments the tmnxEthTunnelConfigTable. | 1.3.6.1.4.1.6527.3.1.2.64.1.2 | not-accessible | current | |
| tmnxEthTunnelOperEntry OBJECT-TYPE The tmnxEthTunnelOperEntry contains information pertaining to an individual Ethernet Tunnel Group's operational state. | 1.3.6.1.4.1.6527.3.1.2.64.1.2.1 | not-accessible | current | |
| tmnxEthTunnelChassisIndex OBJECT-TYPE The tmnxEthTunnelChassisIndex indicates the chassis index for the Ethernet Tunnel Group. The tmnxEthTunnelChassisIndex along with the tmnxEthTunnelIfIndex specifies the row in tmnxPortEntry that corresponds to the Ethernet Tunnel Group. | 1.3.6.1.4.1.6527.3.1.2.64.1.2.1.1 | TmnxChassisIndex | read-only | current |
| tmnxEthTunnelIfIndex OBJECT-TYPE The tmnxEthTunnelIfIndex indicates the tmnxPortPortID for the Ethernet Tunnel Group. The tmnxEthTunnelChassisIndex along with the tmnxEthTunnelIfIndex specifies the row in tmnxPortEntry that corresponds to the Ethernet Tunnel Group. | 1.3.6.1.4.1.6527.3.1.2.64.1.2.1.2 | InterfaceIndexOrZero | read-only | current |
| tmnxEthTunnelMgmtMemberIfIndex OBJECT-TYPE The tmnxEthTunnelMgmtMemberIfIndex indicates the tmnxEthTunnelMemberIfIndex of the Ethernet Tunnel Group member with which the Ethernet Tunnel Group port (tmnxEthTunnelIfIndex) inherits its port configurations. The management member is set to the first member added to the Ethernet Tunnel or the next higher member in the case of removing the first member from the group. If no members are configured for the group, the tmnxEthTunnelMgmtMemberIfIndex is set to zero (0). | 1.3.6.1.4.1.6527.3.1.2.64.1.2.1.3 | InterfaceIndexOrZero | read-only | current |
| tmnxEthTunnelActiveMembers OBJECT-TYPE The tmnxEthTunnelActiveMembers indicates which members are actively receiving and transmitting data for the Ethernet Tunnel Group. | 1.3.6.1.4.1.6527.3.1.2.64.1.2.1.4 | TmnxEthTunnelMemberList | read-only | current |
| tmnxEthTunnelRevertTimeCountDn OBJECT-TYPE The tmnxEthTunnelRevertTimeCountDn indicates the remaining time, in seconds, before the Ethernet Tunnel Group reverts back to the working member. A tmnxEthTunnelRevertTimeCountDn value of '0' indicates that the Ethernet Tunnel Group is not in a revertive wait state. | 1.3.6.1.4.1.6527.3.1.2.64.1.2.1.5 | Unsigned32 | read-only | current |
| tmnxEthTunnelMemberTable OBJECT-TYPE The tmnxEthTunnelMemberTable consists of the members associated with the corresponding tmnxEthTunnelConfigEntry. | 1.3.6.1.4.1.6527.3.1.2.64.1.3 | not-accessible | current | |
| tmnxEthTunnelMemberEntry OBJECT-TYPE The tmnxEthTunnelMemberEntry contains information pertaining to an individual member interface associated with a tmnxEthTunnelConfigEntry. Rows in this table are created and destroyed using the tmnxEthTunnelMemberRowStatus object. | 1.3.6.1.4.1.6527.3.1.2.64.1.3.1 | not-accessible | current | |
| tmnxEthTunnelMemberIndex OBJECT-TYPE The tmnxEthTunnelMemberIndex specifies the row index of the member. | 1.3.6.1.4.1.6527.3.1.2.64.1.3.1.1 | TmnxEthTunnelMemberIndex (1..4294967295) | not-accessible | current |
| tmnxEthTunnelMemberRowStatus OBJECT-TYPE The tmnxEthTunnelMemberRowStatus controls the creation and deletion of row entries in the tmnxEthTunnelMemberTable. | 1.3.6.1.4.1.6527.3.1.2.64.1.3.1.2 | RowStatus | read-create | current |
| tmnxEthTunnelMemberTimeStamp OBJECT-TYPE The value of tmnxEthTunnelMemberTimeStamp indicates the time, since system startup, of the last change to this row. | 1.3.6.1.4.1.6527.3.1.2.64.1.3.1.3 | TimeStamp | read-only | current |
| tmnxEthTunnelMemberIfIndex OBJECT-TYPE The value of tmnxEthTunnelMemberIfIndex specifies the member's port tmnxPortPortID associated with the tmnxEthTunnelConfigEntry. Once specified, the tmnxEthTunnelMemberIfIndex can not be changed; the row must be destroyed and re-created. | 1.3.6.1.4.1.6527.3.1.2.64.1.3.1.4 | InterfaceIndexOrZero | read-create | current |
| tmnxEthTunnelMemberIfCtlTag OBJECT-TYPE The value of tmnxEthTunnelMemberIfCtlTag specifies the member's encapsulation. Once specified, the tmnxEthTunnelMemberIfCtlTag can not be changed; the row must be destroyed and re-created. The default value of all ones (0xFFFFFFFF) represents an invalid, unspecified, control tag. | 1.3.6.1.4.1.6527.3.1.2.64.1.3.1.5 | TmnxEncapVal | read-create | current |
| tmnxEthTunnelMemberDescription OBJECT-TYPE The value of tmnxEthTunnelMemberDescription specifies a detailed description of the Ethernet Tunnel member. | 1.3.6.1.4.1.6527.3.1.2.64.1.3.1.6 | TItemDescription | read-create | current |
| tmnxEthTunnelMemberAdminStatus OBJECT-TYPE The value of tmnxEthTunnelMemberAdminStatus specifies the administrative state of the member. 'outOfService (3)' specifies that the member will not partake in Tunnel Redundancy or load sharing. | 1.3.6.1.4.1.6527.3.1.2.64.1.3.1.7 | TmnxAdminState | read-create | current |
| tmnxEthTunnelMemberOperStatus OBJECT-TYPE The tmnxEthTunnelMemberOperStatus indicates the operational state of of the member. The tmnxEthTunnelMemberOperStatus supports the following two TmnxOperState values: inService (2) outOfService (3) | 1.3.6.1.4.1.6527.3.1.2.64.1.3.1.8 | TmnxOperState | read-only | current |
| tmnxEthTunnelMemberPrecedence OBJECT-TYPE The value of tmnxEthTunnelMemberPrecedence specifies the precedence level of the Member. When tmnxEthTunnelProtectionType of the group is set to 'g8031-1to1 (1)', only two precedence values are valid, and each member MUST have a different precedence. 0 - This is considered the primary member, or the working member. 1 - This is considered the secondary member, or the protection member. When tmnxEthTunnelProtectionType is set to the value 'loadsharing (2)' the precedence of all members should be the same. | 1.3.6.1.4.1.6527.3.1.2.64.1.3.1.9 | Unsigned32 (0..7) | read-create | current |
| tmnxEthTunnelAPSConfigs OBJECT-IDENTITY | 1.3.6.1.4.1.6527.3.1.2.64.1.4 | |||
| tmnxEthTunnelApsTable OBJECT-TYPE The tmnxEthTunnelApsTable consists of APS configuration for Ethernet Tunnel Groups configured with a tmnxEthTunnelProtectionType set to 'g8031-1to1 (1)'. | 1.3.6.1.4.1.6527.3.1.2.64.1.4.1 | not-accessible | current | |
| tmnxEthTunnelApsEntry OBJECT-TYPE The tmnxEthTunnelApsEntry contains APS information for an individual Ethernet Tunnel Group. Entries in the tmnxEthTunnelApsTable are created and destroyed by the system by changing the tmnxEthTunnelProtectionType object. | 1.3.6.1.4.1.6527.3.1.2.64.1.4.1.1 | not-accessible | current | |
| tmnxEthTunnelApsRxPdu OBJECT-TYPE The value of tmnxEthTunnelApsRxPdu indicates the PDU last received on the Ethernet Tunnel Group. | 1.3.6.1.4.1.6527.3.1.2.64.1.4.1.1.1 | TmnxEthTunnelApsPduType | read-only | current |
| tmnxEthTunnelApsTxPdu OBJECT-TYPE The value of tmnxEthTunnelApsTxPdu indicates the PDU last transmitted on the Ethernet Tunnel Group. | 1.3.6.1.4.1.6527.3.1.2.64.1.4.1.1.2 | TmnxEthTunnelApsPduType | read-only | current |
| tmnxEthTunnelApsDefectStatus OBJECT-TYPE The value of tmnxEthTunnelApsDefectStatus indicates what defects are active on the Ethernet Tunnel Group. The Defects are defined as: dFopCM -- Configuration Mismatch dFopPM -- Provisioning Mismatch dFopNR -- Protocol No Response | 1.3.6.1.4.1.6527.3.1.2.64.1.4.1.1.3 | Bits {dFopCM(0), dFopPM(1), dFopNR(2)} | read-only | current |
| tmnxEthTunnelApsSwitchoverTime OBJECT-TYPE The value of tmnxEthTunnelApsSwitchoverTime indicates the time that the Ethernet Tunnel Group last experienced an APS switchover. | 1.3.6.1.4.1.6527.3.1.2.64.1.4.1.1.4 | TimeStamp | read-only | current |
| tmnxEthTunnelApsMemberTable OBJECT-TYPE The tmnxEthTunnelApsMemberTable consists of Ethernet Tunnel Group members which are associated with an Ethernet Tunnel Group where the tmnxEthTunnelProtectionType is set to 'g8031-1to1 (1)'. | 1.3.6.1.4.1.6527.3.1.2.64.1.4.2 | not-accessible | current | |
| tmnxEthTunnelApsMemberEntry OBJECT-TYPE The tmnxEthTunnelApsMemberEntry contains the APS information pertaining to an Ethernet Tunnel Group member. Entries in the tmnxEthTunnelApsMemberTable are created and destroyed by the system, when the Ethernet Tunnel Group object tmnxEthTunnelProtectionType is changed. | 1.3.6.1.4.1.6527.3.1.2.64.1.4.2.1 | not-accessible | current | |
| tmnxEthTunnelApsMemberActCount OBJECT-TYPE The value of tmnxEthTunnelApsMemberActCount indicates the number of times, since system startup, that the Ethernet Tunnel Group member has been active. | 1.3.6.1.4.1.6527.3.1.2.64.1.4.2.1.1 | Counter32 | read-only | current |
| tmnxEthTunnelApsMemberActTime OBJECT-TYPE The value of tmnxEthTunnelApsMemberActTime indicates the accumulative time (in seconds) that the Ethernet Tunnel Group member has been active. | 1.3.6.1.4.1.6527.3.1.2.64.1.4.2.1.2 | Counter32 | read-only | current |
| tmnxEthTunnelApsCommandTable OBJECT-TYPE The tmnxEthTunnelApsCommandTable consists of the one-shot action commands that effect state of Ethernet Tunnel APS configuration. | 1.3.6.1.4.1.6527.3.1.2.64.1.4.3 | not-accessible | current | |
| tmnxEthTunnelApsCommandEntry OBJECT-TYPE The tmnxEthTunnelApsCommandEntry contains the commands available to exist on an existing Ethernet Tunnel APS Group Member. Rows in this table are created and destroyed by the system. | 1.3.6.1.4.1.6527.3.1.2.64.1.4.3.1 | not-accessible | current | |
| tmnxEthTunnelApsCommandSwitch OBJECT-TYPE The value of tmnxEthTunnelApsCommandSwitch specifies the switch command to initiate on an Ethernet Tunnel APS Group. When read, this object returns the last command written or 'noCmd (0)' if no command has been written to this Ethernet Tunnel APS Group since initialization. The return of the last command written does not imply that this command is currently in effect. This request may be preempted by a higher priority local or remote request. In order to determine the current state of the group it is necessary to read the objects tmnxEthTunnelApsRxPdu and tmnxEthTunnelApsTxPdu. The value 'noCmd (0)' may not be used in a write command. The value 'clear (1)' clears all the switch commands listed below for the specified member. In addition, if tmnxEthTunnelRevertTime is a non-zero value (revertive mode) the active WTR (Wait To Restore) state is also cleared. The value 'lockoutOfSecondary (2)' prevents the primary (working) member from switching to the secondary (protection) member. The specified member should be the secondary member index, otherwise an inconsistentValue error is returned. The value 'forceSwitchPrimaryToSecondary (3)' switches the primary member to the secondary member. If the secondary member is specified an inconsistentValue error is returned. The value 'manualSwitchPrimaryToSecondary (4)' switches the specified primary member ot the secondary member. If the secondary member is specified an inconsistentValue error is returned. The value 'exercise (5)' exercises the protocol for a protection switch of the specified member by issuing an Exercise request for that member and checking the response on the APS member. | 1.3.6.1.4.1.6527.3.1.2.64.1.4.3.1.1 | INTEGER {noCmd(0), clear(1), lockoutOfSecondary(2), forceSwitchPrimaryToSecondary(3), manualSwitchPrimaryToSecondary(4), exercise(5)} | read-write | current |
| tmnxEthTunnelApsCommandExsResult OBJECT-TYPE The value of tmnxEthTunnelApsCommandExsResult indicates the result of the last 'excerise (5)' command issued from the tmnxEthTunnelApsCommandSwitch object. When this object returns 'unknown (4)' no 'excersie (5)' command has been written to this Ethernet Tunnel Group Member since initialization. | 1.3.6.1.4.1.6527.3.1.2.64.1.4.3.1.2 | INTEGER {passed(1), failed(2), preempted(3), unknown(4)} | read-only | current |
| tmnxEthTunnelLEConfigs OBJECT-IDENTITY | 1.3.6.1.4.1.6527.3.1.2.64.1.5 | |||
| tmnxEthTunnelLETable OBJECT-TYPE The tmnxEthTunnelLETable consists of the configuration for Ethernet Tunnel Groups that have tmnxEthTunnelProtectionType set to 'loadsharing (2)'. | 1.3.6.1.4.1.6527.3.1.2.64.1.5.1 | not-accessible | current | |
| tmnxEthTunnelLEEntry OBJECT-TYPE The tmnxEthTunnelLEEntry contains the load sharing information pertaining to an Ethernet Tunnel Group. Entries in the tmnxEthTunnelLETable are created or destroyed by setting the tmnxEthTunnelProtectionType to or from 'loadsharing (2)'. | 1.3.6.1.4.1.6527.3.1.2.64.1.5.1.1 | not-accessible | current | |
| tmnxEthTunnelLEAccessAdaptQos OBJECT-TYPE The value of tmnxEthTunnelLEAccessAdaptQos specifies how the Ethernet Tunnel Group SAP queue and virtual scheduler buffering and rate parameters are adapted over multiple active MDAs. link (1) - The Ethernet Tunnel Group will create the SAP queues and virtual schedulers with the actual parameters on each MDA. distribute(2) - Each MDA will receive a fraction of the SAP and scheduler parameters. | 1.3.6.1.4.1.6527.3.1.2.64.1.5.1.1.1 | INTEGER {link(1), distribute(2)} | read-write | current |
| tmnxEthTunnelLEPerFpIngQueueing OBJECT-TYPE The value of tmnxEthTunnelLEPerFpIngQueueing specifies whether a more efficient method of queue allocation for Ethernet Tunnel Group SAPs should be utilized. An 'inconsistentValue' error is returned if this object is set to a different value when there are existing members in the Ethernet Tunnel Group. | 1.3.6.1.4.1.6527.3.1.2.64.1.5.1.1.2 | TruthValue | read-write | current |
| tmnxEthTunnelLEMbrThreshold OBJECT-TYPE The value of tmnxEthTunnelLEMbrThreshold specifies the threshold for the Ethernet Tunnel Group. When a physical port member state changes and the number of operational physical port members is less than or equal to tmnxEthTunnelLEMbrThreshold, the Ethernet Tunnel Group is set operationally down. When the number of operational physical members become greater than tmnxEthTunnelLEMbrThreshold, the Ethernet Tunnel Group is set operationally up The value of zero specifies to bring the Ethernet Tunnel Group operationally down only when all members are operationally down, and bring the Ethernet Tunnel Group operationally up when at least one member is operationally up. | 1.3.6.1.4.1.6527.3.1.2.64.1.5.1.1.3 | Unsigned32 | read-write | current |
| tmnxEthTunnelSAPConfigs OBJECT-IDENTITY | 1.3.6.1.4.1.6527.3.1.2.64.1.6 | |||
| tmnxEthTunnelSAPMemberTable OBJECT-TYPE The tmnxEthTunnelSAPMemberTable consists of the configuration for Ethernet Tunnel Group members associated to SAPs. | 1.3.6.1.4.1.6527.3.1.2.64.1.6.1 | not-accessible | current | |
| tmnxEthTunnelSAPMemberEntry OBJECT-TYPE The tmnxEthTunnelSAPMemberEntry contains the SAP information pertaining to an Ethernet Tunnel Group member. Entries in the tmnxEthTunnelSAPMemberTable are created and destroyed by setting the tmnxEthTunnelSAPMemberRowStatus object. Entries in this table corresponding to control SAPs, those with the index sapEncapValue set to 8191 (0x1FFF), are not writable. For a data SAP that is sharing the fate of a control SAP, these entries allow the configuration of the tag values for the corresponding path in the Ethernet Tunnel port. | 1.3.6.1.4.1.6527.3.1.2.64.1.6.1.1 | not-accessible | current | |
| tmnxEthTunnelSAPMemberRowStatus OBJECT-TYPE The tmnxEthTunnelSAPMemberRowStatus controls the creation and deletion of row entries in the tmnxEthTunnelSAPMemberTable. | 1.3.6.1.4.1.6527.3.1.2.64.1.6.1.1.1 | RowStatus | read-create | current |
| tmnxEthTunnelSAPMemberTagValue OBJECT-TYPE The value of tmnxEthTunnelSAPMemberTagValue specifies the members' encapsulation for the SAP. The default value of all ones (0xFFFFFFFF) represents an invalid or unspecified tag. | 1.3.6.1.4.1.6527.3.1.2.64.1.6.1.1.2 | TmnxEncapVal | read-create | current |
| tmnxEthTunnelStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.6527.3.1.2.64.2 | |||
| tmnxEthTunnelNotifyPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.6527.3.1.3.64 | |||
| tmnxEthTunnelNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.6527.3.1.3.64.0 | |||
| tmnxEthTunnelApsNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.6527.3.1.3.64.0.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| tmnxEthTunnelApsCfgRaiseAlarm NOTIFICATION-TYPE The tmnxEthTunnelApsCfgRaiseAlarm is generated when an Ethernet Tunnel Group working and protection configuration mismatch is detected, at the ETH layer, by detecting the reception of APS protocol from the working transport entity. | 1.3.6.1.4.1.6527.3.1.3.64.0.2.1 | current |
| tmnxEthTunnelApsCfgClearAlarm NOTIFICATION-TYPE The tmnxEthTunnelApsCfgClearAlarm is generated when an Ethernet Tunnel Group working and protection configuration mismatch is cleared. | 1.3.6.1.4.1.6527.3.1.3.64.0.2.2 | current |
| tmnxEthTunnelApsPrvsnRaiseAlarm NOTIFICATION-TYPE The tmnxEthTunnelApsPrvsnRaiseAlarm is generated when an Ethernet Tunnel Group provisioning mismatch is detected, at the ETH layer, by comparing A, B and D bits of the transmitted and received APS protocol. The provision mismatch state is considered as if there is a signal failure on the protection member. This ensures that the working member is kept as active member in the provision mismatch state. | 1.3.6.1.4.1.6527.3.1.3.64.0.2.3 | current |
| tmnxEthTunnelApsPrvsnClearAlarm NOTIFICATION-TYPE The tmnxEthTunnelApsPrvsnClearAlarm is generated when an Ethernet Tunnel Group provisioning mismatch is cleared. | 1.3.6.1.4.1.6527.3.1.3.64.0.2.4 | current |
| tmnxEthTunnelApsNoRspRaiseAlarm NOTIFICATION-TYPE The tmnxEthTunnelApsNoRspRaiseAlarm is generated when an Ethernet Tunnel Group experiences an incompletion of protection switching, at the ETH layer, by comparing the transmitted 'Requested Signal' values and the received 'Bridged Signal' in the APS protocol. | 1.3.6.1.4.1.6527.3.1.3.64.0.2.5 | current |
| tmnxEthTunnelApsNoRspClearAlarm NOTIFICATION-TYPE The tmnxEthTunnelApsNoRspClearAlarm is generated when an Ethernet Tunnel Group no longer experiences an incompletion of protection switching at the ETH layer. | 1.3.6.1.4.1.6527.3.1.3.64.0.2.6 | current |
| tmnxEthTunnelApsSwitchoverAlarm NOTIFICATION-TYPE The tmnxEthTunnelApsSwitchoverAlarm is generated when an Ethernet Tunnel Group experiences a member activity switchover. The tmnxEthTunnelMemberPrecedence always specifies the active member. | 1.3.6.1.4.1.6527.3.1.3.64.0.2.7 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| tmnxEthTunnelCompliance MODULE-COMPLIANCE The compliance statement for revision 1.0 of TIMETRA-ETH-TUNNEL-MIB. | 1.3.6.1.4.1.6527.3.1.1.64.1.1 | obsolete |
| tmnxEthTunnelV8v0Compliance MODULE-COMPLIANCE The compliance statement for revision 2.0 of TIMETRA-ETH-TUNNEL-MIB. | 1.3.6.1.4.1.6527.3.1.1.64.1.2 | current |
| tmnxEthTunnelTimeStampGroup OBJECT-GROUP The group of objects that track configuration changes for the maintenance of Ethernet Tunnels for the 7x50. | 1.3.6.1.4.1.6527.3.1.1.64.2.0.1 | current |
| tmnxEthTunnelTimeStampV8v0Group OBJECT-GROUP The group of objects that track configuration changes for the maintenance of Ethernet Tunnels for Release 8.0 of the 7x50. | 1.3.6.1.4.1.6527.3.1.1.64.2.0.2 | current |
| tmnxEthTunnelBaseConfigGroup OBJECT-GROUP The group of objects for management of Ethernet Tunnel Group configurations for the 7x50. | 1.3.6.1.4.1.6527.3.1.1.64.2.1.1 | current |
| tmnxEthTunnelBaseConfigV8v0Group OBJECT-GROUP The group of objects for management of Ethernet Tunnel Group configurations for Release 8.0 of the 7x50. | 1.3.6.1.4.1.6527.3.1.1.64.2.1.2 | current |
| tmnxEthTunnelBaseOperGroup OBJECT-GROUP The group of objects for management of Ethernet Tunnel Group operations for the 7x50. | 1.3.6.1.4.1.6527.3.1.1.64.2.2.1 | current |
| tmnxEthTunnelBaseMemberGroup OBJECT-GROUP The group of objects for management of Ethernet Tunnel Group Member configurations for the 7x50. | 1.3.6.1.4.1.6527.3.1.1.64.2.3.1 | current |
| tmnxEthTunnelBaseAPSGroup OBJECT-GROUP The group of objects for management of Ethernet Tunnel Group APS configurations for the 7x50. | 1.3.6.1.4.1.6527.3.1.1.64.2.4.1 | current |
| tmnxEthTunnelBaseAPSV8v0Group OBJECT-GROUP The group of objects for management of Ethernet Tunnel Group APS configurations for the 7x50 in release 8.0. | 1.3.6.1.4.1.6527.3.1.1.64.2.4.2 | current |
| tmnxEthTunnelAPSNotifyGroup NOTIFICATION-GROUP The group of notifications supporting the management of Ethernet Tunnel Group configuration for the 7x50. | 1.3.6.1.4.1.6527.3.1.1.64.2.5.1 | current |
| tmnxEthTunnelSAPMemberGroup OBJECT-GROUP The group of objects added in Release 8.0 to support configuration and maintenance of Ethernet Tunnel Groups on SAPs for the 7x50. | 1.3.6.1.4.1.6527.3.1.1.64.2.6.1 | current |
| tmnxEthTunnelLEGroup OBJECT-GROUP The group of objects added in Release 8.0 to support configuration and maintenance of Ethernet Tunnel Groups for loadsharing (LAG) for the 7x50. | 1.3.6.1.4.1.6527.3.1.1.64.2.7.1 | current |