SYSTEM-RESOURCE-MIB
- Registered at
- 1.3.6.1.4.1.52.4.1.1.12.11.3.6.1.4.1.52.4.1.1.12.2
- Namespace
- enterasys
- Source file
SYSTEM-RESOURCE-MIB- Digest
sha256:f9a377b2453e5425ef72771c74e6fb669b9d39a3e4b7f463b8518b4cad2051ab
Imports
| From | Symbols |
|---|---|
| CTRON-MIB-NAMES | ctResource |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CTRON-MIB-NAMES CTRON-OIDS SNMPv2-CONF SNMPv2-SMI SNMPv2-TC SYSTEM-RESOURCE-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| sysResourceInstalled OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.12.1 | |||
| sysResourceCpuTable OBJECT-TYPE This table defines the CPus present within the system. | 1.3.6.1.4.1.52.4.1.1.12.1.1 | not-accessible | mandatory | |
| sysResourceCpuEntry OBJECT-TYPE Defines a particular CPU entry. | 1.3.6.1.4.1.52.4.1.1.12.1.1.1 | not-accessible | mandatory | |
| sysResSlotID OBJECT-TYPE The slot for which this CPU information pertains. | 1.3.6.1.4.1.52.4.1.1.12.1.1.1.1 | INTEGER | read-only | mandatory |
| sysResCpuIndex OBJECT-TYPE An identifier for the CPU on a per slot basis. | 1.3.6.1.4.1.52.4.1.1.12.1.1.1.2 | INTEGER | read-only | mandatory |
| sysResCpuType OBJECT-TYPE The processor (CPU) type. | 1.3.6.1.4.1.52.4.1.1.12.1.1.1.3 | OBJECT IDENTIFIER | read-only | mandatory |
| sysResCpuSpeed OBJECT-TYPE The speed of the processor in mega-hertz. | 1.3.6.1.4.1.52.4.1.1.12.1.1.1.4 | INTEGER | read-only | mandatory |
| sysResCpuID OBJECT-TYPE A system wide unique identifier for each CPU. | 1.3.6.1.4.1.52.4.1.1.12.1.1.1.5 | INTEGER | read-only | mandatory |
| sysResInstalledLocalMemory OBJECT-TYPE Total installed local memory 'DRAM' used for code and data. This is reported in mega-bytes. | 1.3.6.1.4.1.52.4.1.1.12.1.1.1.6 | INTEGER | read-only | mandatory |
| sysResUsedLocalMemory OBJECT-TYPE The current amount of local memory 'DRAM' that is currently being used for code and data. This is reported in bytes. | 1.3.6.1.4.1.52.4.1.1.12.1.1.1.7 | INTEGER | read-only | mandatory |
| sysResourceTable OBJECT-TYPE This table describes total installed system resources. | 1.3.6.1.4.1.52.4.1.1.12.1.2 | not-accessible | mandatory | |
| sysResourceEntry OBJECT-TYPE Describes a particular installed set of system resources. | 1.3.6.1.4.1.52.4.1.1.12.1.2.1 | not-accessible | mandatory | |
| sysResInstalledNvram OBJECT-TYPE The total installed non-volatile memory 'NVRAM'. This is reported in K-bytes. | 1.3.6.1.4.1.52.4.1.1.12.1.2.1.1 | INTEGER | read-only | mandatory |
| sysResInstalledFlash OBJECT-TYPE The total installed flash memory. This is reported in K-bytes. | 1.3.6.1.4.1.52.4.1.1.12.1.2.1.2 | INTEGER | read-only | mandatory |
| sysResInstalledSharedMemory OBJECT-TYPE The total amount of shared memory that is installed. This is reported in K-bytes. | 1.3.6.1.4.1.52.4.1.1.12.1.2.1.3 | INTEGER | read-only | mandatory |
| sysResUsedNvram OBJECT-TYPE The current amount of non-volatile memory 'NVRAM' that is currently being used for data. This is reported in bytes. | 1.3.6.1.4.1.52.4.1.1.12.1.2.1.4 | INTEGER | read-only | mandatory |
| sysResUsedFlash OBJECT-TYPE The current amount of flash memory that is currently being used for code and data. This is reported in bytes. | 1.3.6.1.4.1.52.4.1.1.12.1.2.1.5 | INTEGER | read-only | mandatory |
| sysResUsedSharedMemory OBJECT-TYPE The current amount of shared memory that is currently being used for data. This is reported in bytes. | 1.3.6.1.4.1.52.4.1.1.12.1.2.1.6 | INTEGER | read-only | mandatory |
| sysResourceSwitch OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.12.2 | |||
| sysResManagementCpuResource OBJECT-TYPE The desired amount of CPU bandwith reserved for management purposes. For example, in the default state (1), the device will devote all CPU bandwith to switching if necessary therefore possibly dropping management frames. If limited (2) is selected, management of the device may appear slow while under maximum switching capabilities although management will still be possible which may result in dropped frames. If full (3) is selected, management of the device is always possible and acts as if there is no switching load on the device, which may result in dropped frames. | 1.3.6.1.4.1.52.4.1.1.12.2.1 | INTEGER {none(1), limited(2), full(3)} | read-write | mandatory |
| switchLoad OBJECT-TYPE The returned value represents the current switch load based upon a percentage of maximum switching capacity where maximum switching capacity is 100%. | 1.3.6.1.4.1.52.4.1.1.12.2.2 | INTEGER | read-only | mandatory |
| peakSwitchload OBJECT-TYPE The peak load which has occured on this switch. The value returned represents The peak percentage of switch load based upon a percentage of maximum switch load which is 100%. | 1.3.6.1.4.1.52.4.1.1.12.2.3 | INTEGER | read-only | mandatory |
| peakSwitchLoadTime OBJECT-TYPE The time at which the peak switch load occured. The value returned will represent system up time at which the peak occured. | 1.3.6.1.4.1.52.4.1.1.12.2.4 | TimeTicks | read-only | mandatory |
| peakSwitchClear OBJECT-TYPE This object is used to clear the values found in peakSwitchload and peakSwitchLoadTime. When set with a value of clear(1) the values will be cleared. When read, a value of noClear(2) will be returned. A set of noClear(2) will have no effect. | 1.3.6.1.4.1.52.4.1.1.12.2.5 | INTEGER {clear(1), noClear(2)} | read-write | mandatory |