SYNSO-UPSMIB
- Registered at
- 1.3.6.1.4.1.9557
- Namespace
- synso
- Source file
SYNSO-UPSMIB- Digest
sha256:44b822415dc74cf3ff277dd37d7c1c9822002574de19c984a3c06b8a8bfeff96
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
SNMPv2-CONF SNMPv2-SMI SNMPv2-TC SYNSO-UPSMIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| synso OBJECT-IDENTITY | 1.3.6.1.4.1.9557 | |||
| synsoUpsSoftware OBJECT-IDENTITY | 1.3.6.1.4.1.9557.1 | |||
| syupsBasicSetting OBJECT-IDENTITY | 1.3.6.1.4.1.9557.1.1 | |||
| syupsPlatForm OBJECT-TYPE The platform which the UPS software is running on. | 1.3.6.1.4.1.9557.1.1.1 | DisplayString (SIZE(0..31)) | read-only | mandatory |
| syupsFeatureTable OBJECT-TYPE A table containing the supported features. | 1.3.6.1.4.1.9557.1.1.2 | not-accessible | mandatory | |
| syupsFeatureEntry OBJECT-TYPE An entry representing the support information for a feature. | 1.3.6.1.4.1.9557.1.1.2.1 | not-accessible | mandatory | |
| syupsFeature OBJECT-TYPE The string representing a feature. | 1.3.6.1.4.1.9557.1.1.2.1.1 | INTEGER | read-only | mandatory |
| syupsSupportInfo OBJECT-TYPE The string containing the support information for a feature. | 1.3.6.1.4.1.9557.1.1.2.1.2 | DisplayString | read-only | mandatory |
| syupsSystemStartTime OBJECT-TYPE The time that the UPS software starts. It is the number of seconds elapsed since 00:00:00, January 1, 1970. | 1.3.6.1.4.1.9557.1.1.3 | INTEGER | read-only | mandatory |
| syupsSignalType OBJECT-TYPE The signaling method between the UPS and software. When the basicSignal used, the UPS changes the voltage level of some specific pins to notify the software of what critical event occurs. Usually, the UPS will inform software when a power failure or a low battery condition occurs. On the other hand, the software can change the voltage signal of a specific pin to ask the UPS to shut down (turn off). When the smartSignal used, the UPS asks like a standard communication device (such as mouse or modem). That means the UPS and software communicate with each other using a pre-defined protocol. The protocol should include at least the following commands: - query the power status of the UPS - query the power data of the UPS - command the UPS to shut down | 1.3.6.1.4.1.9557.1.1.4 | INTEGER {basicSignal(0), smartSignal(1)} | read-write | mandatory |
| syupsBasicSignalDefinition OBJECT-TYPE The signal definitions for the basic signaling UPS. The value can be the following bit combinations: SG_POWER_FAILURE_ENABLE 0x01 SG_BATTERY_LOW_ENABLE 0x02 SG_SHUTDOWN_ENABLE 0x04 SG_POWER_FAILURE_VOLTHIGH 0x10 SG_BATTERY_LOW_VOLTHIGH 0x20 SG_SHUTDOWN_VOLTHIGH 0x40 SG_POWER_FAILURE_ENABLE, SG_BATTERY_LOW_ENABLE, and SG_SHUTDOWN_ENABLE indicate whether the signals for a power failure , a low battery condition, and the UPS shutdown are enabled. SG_POWER_FAILURE_VOLTHIGH, SG_BATTERY_LOW_VOLTHIGH, and SG_SHUTDOWN_VOLTHIGH indicate whether the voltage level for these signals are high or low. | 1.3.6.1.4.1.9557.1.1.5 | INTEGER | read-only | mandatory |
| syupsUpsComPort OBJECT-TYPE The serial port which the UPS software use to communicate with the UPS. The format varies from platform to platform. For DOS program, the format is 'portNo, portAddress, portIRQ' (e.g. '1, 0x2f8, 3' for COM2). For Windows program, it is 'portNo'. For NetWare program, it is 'portType, boardNo, portNo'. For UNIX, it is 'device name'. | 1.3.6.1.4.1.9557.1.1.6 | DisplayString (SIZE(0..31)) | read-write | mandatory |
| syupsModemComPort OBJECT-TYPE The serial port which the UPS software use to dial out when some particular events occur. The format varies from platform to platform. For DOS program, the format is 'portNo, portAddress, portIRQ' (e.g. '1, 0x2f8, 3' for COM2). For Windows program, it is 'portNo'. For NetWare program, it is 'portType, boardNo, portNo'. For UNIX, it is 'device name'. | 1.3.6.1.4.1.9557.1.1.7 | DisplayString (SIZE(0..31)) | read-write | mandatory |
| syupsUpsExtension OBJECT-IDENTITY | 1.3.6.1.4.1.9557.1.2 | |||
| syupsUpsAlarm OBJECT-TYPE It is used internally. Each bit indicates a critical event, such as input bad, on battery, communications lost, ...,etc. | 1.3.6.1.4.1.9557.1.2.1 | INTEGER | read-only | mandatory |
| syupsSerialNo OBJECT-TYPE The serial number of the UPS connected to the UPS software. | 1.3.6.1.4.1.9557.1.2.2 | DisplayString (SIZE(0..63)) | read-only | mandatory |
| syupsConfigBatteryVoltage OBJECT-TYPE The nominal battery voltage. | 1.3.6.1.4.1.9557.1.2.3 | INTEGER | read-only | mandatory |
| syupsBatteryReplaceDate OBJECT-TYPE The last battery replacement date. It represents the number of days elapsed since January 1, 1901. | 1.3.6.1.4.1.9557.1.2.4 | INTEGER | read-write | mandatory |
| syupsNoOutlet OBJECT-TYPE The total number of controllable outlets. | 1.3.6.1.4.1.9557.1.2.5 | INTEGER | read-only | mandatory |
| syupsOutletParamter OBJECT-TYPE This object is not used any more. | 1.3.6.1.4.1.9557.1.2.6 | DisplayString | read-write | mandatory |
| syupsShutdownDepend OBJECT-TYPE A string containing those who should perform their shutdown procedure before the UPS turns off. The agent will inform each one in the list to begin their shutdown procedure before it turns off the power of the UPS. | 1.3.6.1.4.1.9557.1.2.7 | DisplayString (SIZE(0..255)) | read-write | mandatory |
| syupsEnableAutoSave OBJECT-TYPE Setting it to 1, the agent will try to save all files opened by applications before shutting down the operation system. Setting it to 0 will disable the auto save feature. | 1.3.6.1.4.1.9557.1.2.8 | INTEGER | read-write | mandatory |
| syupsShutdownOsDelay OBJECT-TYPE The delay time before shutting down the operation system. When it is necessary to shut down the operation system, the agent will run the specified command file and try to save all files opened by applications before shutting down the OS. This delay time is used to do such things. | 1.3.6.1.4.1.9557.1.2.9 | INTEGER | read-write | mandatory |
| syupsShutdownUpsDelay OBJECT-TYPE The delay time before shutting down the UPS. Before shutting down the operation system, the agent will send a command to tell the UPS to shut down. This delay time is used to allow the agent to shut down the operation system safely. | 1.3.6.1.4.1.9557.1.2.10 | INTEGER | read-write | mandatory |
| syupsSaveConfig OBJECT-TYPE Used to inform the agnet to save the configurations. Its value indicates which group to be saved. For example, a 1 indicates group 1 (syupsBasicSetting) to be saved, a 6 1 indicates group 6 (syupsCoworker) to be saved. You have to use it to save configurations after changing settings, or the settings may be lost. | 1.3.6.1.4.1.9557.1.2.11 | INTEGER | read-write | mandatory |
| syupsNoOutlets OBJECT-TYPE The number of controllable outlets. | 1.3.6.1.4.1.9557.1.2.12 | INTEGER | read-only | mandatory |
| syupsOutletTable OBJECT-TYPE A list of outlet table entries. The number of entries is given by the value of syupsNoOutlets. | 1.3.6.1.4.1.9557.1.2.13 | not-accessible | mandatory | |
| syupsOutletEntry OBJECT-TYPE An entry containing information applicable to a particular controllable outlet. | 1.3.6.1.4.1.9557.1.2.13.1 | not-accessible | mandatory | |
| syupsOutletIndex OBJECT-TYPE The outlet identifier. | 1.3.6.1.4.1.9557.1.2.13.1.1 | INTEGER | not-accessible | mandatory |
| syupsOutletDescription OBJECT-TYPE The outlet description. | 1.3.6.1.4.1.9557.1.2.13.1.2 | DisplayString (SIZE(0..15)) | read-write | mandatory |
| syupsOutletShutdownDelay OBJECT-TYPE The delay time (in seconds) before turning off the outlet. Before turning off the outlet, the agent will send a shutdown command to anyone specified in the syupsOutletShutdownDepend, telling them to start their shutdown procedure. This delay time is used to allow those cmputers to be shut down safely. | 1.3.6.1.4.1.9557.1.2.13.1.3 | INTEGER | read-write | mandatory |
| syupsOutletShutdownDepend OBJECT-TYPE A string containing those who should perform their shutdown procedure before the outlet turns off. The agent will inform each one in the list to begin their shutdown procedure before it turns off the power of the outlet. | 1.3.6.1.4.1.9557.1.2.13.1.4 | DisplayString (SIZE(0..63)) | read-write | mandatory |
| syupsOutletOperator OBJECT-TYPE The operator is used to control the outlets. There are two commands: 1. 'SWITCH: OutletNo, OnOff'. The OutletNo specify the outlet. The OnOff can be 0 (off) or 1 (on). For example, 'SWITCH: 2, 1' means turning on (1) the outlet #2. 'SWITCH: 4, 0' means turning off (0) the outlet #4. 2. 'SET: OutletNo, Desc, DelayTime, Depend'. The OutletNo specify the outlet. The Desc specifies the outlet description. The DelayTime specifies the shutdown delay time for the outlet. The Depend specifies the shutdown dependent list for the outlet. For example, 'SET: 3, My Printer, 20, 192.168.1.9' means setting the description of outlet #3 to 'My Printer', the shutdown delay time to 20 seconds and the Shutdown Dependent to '192.168.1.9'. | 1.3.6.1.4.1.9557.1.2.14 | DisplayString | read-write | mandatory |
| syupsEventAction OBJECT-IDENTITY | 1.3.6.1.4.1.9557.1.3 | |||
| syupsNoEventActionEntries OBJECT-TYPE The number of event-action items. This variable indicates the number of rows in the event-action table. | 1.3.6.1.4.1.9557.1.3.1 | INTEGER | read-only | mandatory |
| syupsEventActionTable OBJECT-TYPE A list of event action entries. The number of entries is given by the value of syupsNoEventActionEntries. | 1.3.6.1.4.1.9557.1.3.2 | not-accessible | mandatory | |
| syupsEventActionEntry OBJECT-TYPE An entry containing information applicable to a particular event action. | 1.3.6.1.4.1.9557.1.3.2.1 | not-accessible | mandatory | |
| syupsEventId OBJECT-TYPE The event ID. | 1.3.6.1.4.1.9557.1.3.2.1.1 | INTEGER | read-only | mandatory |
| syupsLogEnable OBJECT-TYPE Whether to log the event in the log file when it occurs. A 1 indicates enable, a 0 indicates disable. | 1.3.6.1.4.1.9557.1.3.2.1.2 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| syupsNotifyEnable OBJECT-TYPE Whether to notify users when the event occurs. A 1 indicates enable, a 0 indicates disable. | 1.3.6.1.4.1.9557.1.3.2.1.3 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| syupsNotifyDelay OBJECT-TYPE How long the event must last before notifying users. | 1.3.6.1.4.1.9557.1.3.2.1.4 | INTEGER | read-write | mandatory |
| syupsNotifyMessage OBJECT-TYPE The message which will be sent when the event occurs. | 1.3.6.1.4.1.9557.1.3.2.1.5 | DisplayString (SIZE(0..63)) | read-write | mandatory |
| syupsNotifyPeriod OBJECT-TYPE How often (in seconds) to send the message. The -1 means once. | 1.3.6.1.4.1.9557.1.3.2.1.6 | INTEGER | read-write | mandatory |
| syupsNotifyUsers OBJECT-TYPE Who will receive the message when the event occurs. | 1.3.6.1.4.1.9557.1.3.2.1.7 | DisplayString (SIZE(0..255)) | read-write | mandatory |
| syupsEmailEnable OBJECT-TYPE Whether to email users when the event occurs. A 1 indicates enable, a 0 indicates disable. | 1.3.6.1.4.1.9557.1.3.2.1.8 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| syupsEmailDelay OBJECT-TYPE How long the event must last before emailing users. | 1.3.6.1.4.1.9557.1.3.2.1.9 | INTEGER | read-write | mandatory |
| syupsEmailMessage OBJECT-TYPE The additional message which will be sent when the event occurs. | 1.3.6.1.4.1.9557.1.3.2.1.10 | DisplayString (SIZE(0..63)) | read-write | mandatory |
| syupsEmailUsers OBJECT-TYPE Who will receive the mail when the event occurs. | 1.3.6.1.4.1.9557.1.3.2.1.11 | DisplayString (SIZE(0..255)) | read-write | mandatory |
| syupsPageEnable OBJECT-TYPE Whether to page users when the event occurs. A 1 indicates enable, a 0 indicates disable. | 1.3.6.1.4.1.9557.1.3.2.1.12 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| syupsPageDelay OBJECT-TYPE How long the event must last before paging users. | 1.3.6.1.4.1.9557.1.3.2.1.13 | INTEGER | read-write | mandatory |
| syupsPageMessage OBJECT-TYPE The message which will be sent when the event occurs. | 1.3.6.1.4.1.9557.1.3.2.1.14 | DisplayString (SIZE(0..15)) | read-write | mandatory |
| syupsPageUsers OBJECT-TYPE Who will receive the code when the event occurs. | 1.3.6.1.4.1.9557.1.3.2.1.15 | DisplayString (SIZE(0..255)) | read-write | mandatory |
| syupsCommandEnable OBJECT-TYPE Whether to execute the external command file when the event occurs. A 1 indicates enable, a 0 indicates disable. | 1.3.6.1.4.1.9557.1.3.2.1.16 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| syupsCommandDelay OBJECT-TYPE How long the event must last before executing the external command file. | 1.3.6.1.4.1.9557.1.3.2.1.17 | INTEGER | read-write | mandatory |
| syupsCommandFile OBJECT-TYPE The external command file which will be executed when the event occurs. | 1.3.6.1.4.1.9557.1.3.2.1.18 | DisplayString (SIZE(0..63)) | read-write | mandatory |
| syupsShutdownEnable OBJECT-TYPE Whether to shut down the system when the event occurs. A 1 indicates enable, a 0 indicates disable. | 1.3.6.1.4.1.9557.1.3.2.1.19 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| syupsShutdownDelay OBJECT-TYPE How long the event must last before shutting down the system. | 1.3.6.1.4.1.9557.1.3.2.1.20 | INTEGER | read-write | mandatory |
| syupsHistory OBJECT-IDENTITY | 1.3.6.1.4.1.9557.1.4 | |||
| syupsMaxEventFileLength OBJECT-TYPE The maximum length (in bytes) of the event log file. UPS software will cut the first half of the file whenever the file exceeds this maximum length. | 1.3.6.1.4.1.9557.1.4.1 | INTEGER | read-write | mandatory |
| syupsEventNumRecords OBJECT-TYPE The total number of records in the event log file. | 1.3.6.1.4.1.9557.1.4.2 | INTEGER | read-only | mandatory |
| syupsEventTable OBJECT-TYPE A list of event entries. Each entry represents a record in the event log file. | 1.3.6.1.4.1.9557.1.4.3 | not-accessible | mandatory | |
| syupsEventEntry OBJECT-TYPE An entry representing a record in the event log file. | 1.3.6.1.4.1.9557.1.4.3.1 | not-accessible | mandatory | |
| syupsEventIndex OBJECT-TYPE The record number of an event entry. | 1.3.6.1.4.1.9557.1.4.3.1.1 | INTEGER | read-only | mandatory |
| syupsEventRecord OBJECT-TYPE The string containing an event entry. | 1.3.6.1.4.1.9557.1.4.3.1.2 | DisplayString | read-only | mandatory |
| syupsDataRecordInterval OBJECT-TYPE The number of minutes to wait between each recording to the data log file. | 1.3.6.1.4.1.9557.1.4.4 | INTEGER | read-write | mandatory |
| syupsMaxDataFileLength OBJECT-TYPE The maximum length (in bytes) of the data log file. UPS software will cut the first half of the file whenever the file exceeds this maximum length. | 1.3.6.1.4.1.9557.1.4.5 | INTEGER | read-write | mandatory |
| syupsDataNumRecords OBJECT-TYPE The total number of records in the data log file. | 1.3.6.1.4.1.9557.1.4.6 | INTEGER | read-only | mandatory |
| syupsDataTable OBJECT-TYPE A list of data entries. Each entry represents a record in the data log file. | 1.3.6.1.4.1.9557.1.4.7 | not-accessible | mandatory | |
| syupsDataEntry OBJECT-TYPE An entry representing a record in the data log file. | 1.3.6.1.4.1.9557.1.4.7.1 | not-accessible | mandatory | |
| syupsDataIndex OBJECT-TYPE The record number of a data entry. | 1.3.6.1.4.1.9557.1.4.7.1.1 | INTEGER | read-only | mandatory |
| syupsDataRecord OBJECT-TYPE The string containing a data entry. | 1.3.6.1.4.1.9557.1.4.7.1.2 | DisplayString | read-only | mandatory |
| syupsHistoryOperator OBJECT-TYPE The operator which is used to operate on the history file. The command format is 'Command, File, Range'. So far, Command can be PURGE, File can be EVENT or DATA, and Range can be ALL or 'mm/dd/year..mm/dd/year'. For example, 'PURGE, EVENT, ALL' tells the UPS software to purge all entries in the event log file. And 'PURGE, DATA, 03/20/1995..07/02/1995' tells the UPS software to purge the entries which are recorded form 03/20/1995 to 07/20/1995 from the event log file. | 1.3.6.1.4.1.9557.1.4.8 | DisplayString | read-write | mandatory |
| syupsScopeSettings OBJECT-TYPE The string contains the settings for UPS Scope Chart, including Value Original Point, Value Unit, Time Unit, Time Interval, and Display Items. The format for the settings string is '%d, %d, %d, %d, %d'. Display Items can be any one or any combination of the following items: SCOPE_INPUT_VOLT 0x0001 SCOPE_OUTPUT_VOLT 0x0010 SCOPE_INPUT_FREQ 0x0100 SCOPE_OUTPUT_FREQ 0x1000 | 1.3.6.1.4.1.9557.1.4.9 | DisplayString | read-write | mandatory |
| syupsSchedule OBJECT-IDENTITY | 1.3.6.1.4.1.9557.1.5 | |||
| syupsNoSchEntries OBJECT-TYPE The total number of schedule entries. | 1.3.6.1.4.1.9557.1.5.1 | INTEGER | read-only | mandatory |
| syupsSchOperator OBJECT-TYPE The operator which is used to operate on the schedule table. There are three commands: 1. 'ADD: action, mm/dd/yyyy, hh:mm:ss, week_day, repeat' indicates to add a new entry to the schedule list. 2. 'REPLACE: i, action, mm/dd/yyyy, hh:mm:ss, week_day, repeat' indicates to replace the i-th entry in the table with the new settings. 3. 'DELETE:n1, n2' indicates to delete the entries ranging from number n1 to number n2 from the schedule table. 'action' could be the following: General System Test (1) Quick Battery Test (2) Deep Battery Test (3) Turn On UPS (11) Turn Off UPS (21) Turn On Outlet (100+x) Turn Off Outlet (200+x) where x indicates the outlet number. 'mm/dd/year' and 'hh:mm:ss' specify the action's starting time. 'repeat' indicates the frequency of the action, it could be Once(1), Daily(2), Weekly(3) and Monthly(4). 'week_day' indicating the day of week is meaningful only when the repeat is set to Weekly, and it could be Sun(0), Mon(1), ..., and Sat(6). For example, '1, 07/08/1994, 15:30:00, 0, 4' indicates that the UPS will do a General System Test at 3:30 PM every month from July 8, 1994. '203, 06/20/1995, 07:00:00, 0, 1' indicates that the UPS will turn off outlet #3 at 7 o'clock on June 20, 1995 and do it only once. | 1.3.6.1.4.1.9557.1.5.2 | DisplayString | read-write | mandatory |
| syupsSchTable OBJECT-TYPE A list of schedule entries. | 1.3.6.1.4.1.9557.1.5.3 | not-accessible | mandatory | |
| syupsSchEntry OBJECT-TYPE A schedule entry. | 1.3.6.1.4.1.9557.1.5.3.1 | not-accessible | mandatory | |
| syupsSchIndex OBJECT-TYPE The entry number of a schedule setting. | 1.3.6.1.4.1.9557.1.5.3.1.1 | INTEGER | read-only | mandatory |
| syupsSchStartDate OBJECT-TYPE The starting date (mm/dd/yyyy) of the schedule entry. | 1.3.6.1.4.1.9557.1.5.3.1.2 | DisplayString | read-only | mandatory |
| syupsSchStartTime OBJECT-TYPE The starting time (hh:mm:ss) of the schedule entry. | 1.3.6.1.4.1.9557.1.5.3.1.3 | DisplayString | read-only | mandatory |
| syupsSchWeekDay OBJECT-TYPE The starting day of week for the schedule entry. It could be Sun(0), Mon(1), ..., and Sat(6). It is used when syupsSchRepeat is set to weekly. | 1.3.6.1.4.1.9557.1.5.3.1.4 | INTEGER {sunday(0), monday(1), tuesday(2), wednesday(3), thursday(4), friday(5), saturday(6)} | read-only | mandatory |
| syupsSchAction OBJECT-TYPE The action of the schedule entry. It could be: General System Test (1) Quick Battery Test (2) Deep Battery Test (3) Turn On UPS (11) Turn Off UPS (21) Turn On Outlet (100+x) Turn Off Outlet (200+x) where x indicates the outlet number. | 1.3.6.1.4.1.9557.1.5.3.1.5 | INTEGER | read-only | mandatory |
| syupsSchRepeat OBJECT-TYPE It indicates the frequency of the action, it could be Once(1), Daily(2), Weekly(3) and Monthly(4). | 1.3.6.1.4.1.9557.1.5.3.1.6 | INTEGER {once(1), daily(2), weekly(3), monthly(4)} | read-only | mandatory |
| syupsCoworker OBJECT-IDENTITY | 1.3.6.1.4.1.9557.1.6 | |||
| syupsNoAccessControl OBJECT-TYPE The total number of access control entries. | 1.3.6.1.4.1.9557.1.6.1 | INTEGER | read-only | mandatory |
| syupsAccessControlOperator OBJECT-TYPE The operator which is used to operate on the access control table. There are three commands: 1. 'ADD: community' indicates to add a new entry to the access control list. 2. 'REPLACE: x, community' indicates to replace the x-th entry in the table with the new settings. 3. 'DELETE:n1, n2' indicates to delete the entries from number n1 to number n2 from the access control table. | 1.3.6.1.4.1.9557.1.6.2 | DisplayString | read-write | mandatory |
| syupsAccessControlTable OBJECT-TYPE A list of access control entries. Only entries in this list can have access to the agent. | 1.3.6.1.4.1.9557.1.6.3 | not-accessible | mandatory | |
| syupsAccessControlEntry OBJECT-TYPE An access control entry. | 1.3.6.1.4.1.9557.1.6.3.1 | not-accessible | mandatory | |
| syupsAccessControlIndex OBJECT-TYPE The entry number of a access control setting. | 1.3.6.1.4.1.9557.1.6.3.1.1 | INTEGER | read-only | mandatory |
| syupsAccessControlSetting OBJECT-TYPE A string containing the community name. | 1.3.6.1.4.1.9557.1.6.3.1.2 | DisplayString | read-only | mandatory |
| syupsNoTrapReceiver OBJECT-TYPE The total number of trap receiver entries. | 1.3.6.1.4.1.9557.1.6.4 | INTEGER | read-only | mandatory |
| syupsTrapReceiverOperator OBJECT-TYPE The operator which is used to operate on the trap receiver table. There are three commands: 1. 'ADD: ipAddress' indicates to add a new entry to the trap receiver list. 2. 'REPLACE: x, ipAddress' indicates to replace the x-th entry in the table with the new settings. 3. 'DELETE:n1, n2' indicates to delete the entries from number n1 to number n2 from the trap receiver table. | 1.3.6.1.4.1.9557.1.6.5 | DisplayString | read-write | mandatory |
| syupsTrapReceiverTable OBJECT-TYPE A list of trap receiver entries. When an important event occurs, the agent will send traps to all the entries in the list. | 1.3.6.1.4.1.9557.1.6.6 | not-accessible | mandatory | |
| syupsTrapReceiverEntry OBJECT-TYPE An trap receiver entry. | 1.3.6.1.4.1.9557.1.6.6.1 | not-accessible | mandatory | |
| syupsTrapReceiverIndex OBJECT-TYPE The entry number of a trap receiver setting. | 1.3.6.1.4.1.9557.1.6.6.1.1 | INTEGER | read-only | mandatory |
| syupsTrapReceiverSetting OBJECT-TYPE A string containing a trap receiver's IP address. | 1.3.6.1.4.1.9557.1.6.6.1.2 | DisplayString | read-only | mandatory |
| syupsTraps OBJECT-IDENTITY | 1.3.6.1.4.1.9557.1.7 |
Notifications
| Name | OID | Status |
|---|---|---|
| syupsTrapOverTemperature NOTIFICATION-TYPE The battery temperature is too high. This trap is persistent and is resent at one minute intervals until the UPS either turns off or the status is no longer present. | 1.3.6.1.4.1.9557.1.7.1 | current |
| syupsTrapOverCurrent NOTIFICATION-TYPE The current is too high. This trap is persistent and is resent at one minute intervals until the UPS either turns off or the status is no longer present. | 1.3.6.1.4.1.9557.1.7.2 | current |
| syupsTrapOverVoltage NOTIFICATION-TYPE The voltage is too high. This trap is persistent and is resent at one minute intervals until the UPS either turns off or the status is no longer present. | 1.3.6.1.4.1.9557.1.7.3 | current |
| syupsTrapUnderVoltage NOTIFICATION-TYPE The voltage is too low. This trap is persistent and is resent at one minute intervals until the UPS either turns off or the status is no longer present. | 1.3.6.1.4.1.9557.1.7.4 | current |
| syupsOffFrequency NOTIFICATION-TYPE The frequency is abnormal. This trap is persistent and is resent at one minute intervals until the UPS either turns off or the status is no longer present. | 1.3.6.1.4.1.9557.1.7.5 | current |
| syupsLowBattery NOTIFICATION-TYPE The battery is too low. This trap is persistent and is resent at one minute intervals until the UPS either turns off or the status is no longer present. | 1.3.6.1.4.1.9557.1.7.6 | current |
| syupsBadBattery NOTIFICATION-TYPE The battery is bad. This trap is persistent and is resent at one minute intervals until the UPS either turns off or the status is no longer present. | 1.3.6.1.4.1.9557.1.7.7 | current |