SYMBOL-AP-MIB

type

type

TEXTUAL-CONVENTION

A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present.

type

type

TEXTUAL-CONVENTION

Represents Ethernet Types.

type

type

type

type

type

type

TEXTUAL-CONVENTION

The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of [2].) The status column has six defined values: - `active', which indicates that the conceptual row is available for use by the managed device; - `notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - `notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - `createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - `createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - `destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Whereas five of the six values (all except `notReady') may be specified in a management protocol set operation, only three values will be returned in response to a management protocol retrieval operation: `notReady', `notInService' or `active'. That is, when queried, an existing conceptual row has only three states: it is either available for use by the managed device (the status column has value `active'); it is not available for use by the managed device, though the agent has sufficient information to make it so (the status column has value `notInService'); or, it is not available for use by the managed device, and an attempt to make it so would fail because the agent has insufficient information (the state column has value `notReady'). NOTE WELL This textual convention may be used for a MIB table, irrespective of whether the values of that table's conceptual rows are able to be modified while it is active, or whether its conceptual rows must be taken out of service in order to be modified. That is, it is the responsibility of the DESCRIPTION clause of the status column to specify whether the status column must not be `active' in order for the value of some other column of the same conceptual row to be modified. If such a specification is made, affected columns may be changed by an SNMP set PDU if the RowStatus would not be equal to `active' either immediately before or after processing the PDU. In other words, if the PDU also contained a varbind that would change the RowStatus value, the column in question may be changed if the RowStatus was not equal to `active' as the PDU was received, or if the varbind sets the status to a value other than 'active'. Also note that whenever any elements of a row exist, the RowStatus column must also exist. To summarize the effect of having a conceptual row with a status column having a SYNTAX clause value of RowStatus, consider the following state diagram: STATE +--------------+-----------+-------------+------------- | A | B | C | D | |status col.|status column| |status column | is | is |status column ACTION |does not exist| notReady | notInService| is active --------------+--------------+-----------+-------------+------------- set status |noError ->D|inconsist- |inconsistent-|inconsistent- column to | or | entValue| Value| Value createAndGo |inconsistent- | | | | Value| | | --------------+--------------+-----------+-------------+------------- set status |noError see 1|inconsist- |inconsistent-|inconsistent- column to | or | entValue| Value| Value createAndWait |wrongValue | | | --------------+--------------+-----------+-------------+------------- set status |inconsistent- |inconsist- |noError |noError column to | Value| entValue| | active | | | | | | or | | | | | | | |see 2 ->D| ->D| ->D --------------+--------------+-----------+-------------+------------- set status |inconsistent- |inconsist- |noError |noError ->C column to | Value| entValue| | notInService | | | | | | or | | or | | | | | |see 3 ->C| ->C|wrongValue --------------+--------------+-----------+-------------+------------- set status |noError |noError |noError |noError column to | | | | destroy | ->A| ->A| ->A| ->A --------------+--------------+-----------+-------------+------------- set any other |see 4 |noError |noError |see 5 column to some| | | | value | | see 1| ->C| ->D --------------+--------------+-----------+-------------+------------- (1) goto B or C, depending on information available to the agent. (2) if other variable bindings included in the same PDU, provide values for all columns which are missing but required, then return noError and goto D. (3) if other variable bindings included in the same PDU, provide values for all columns which are missing but required, then return noError and goto C. (4) at the discretion of the agent, the return value may be either: inconsistentName: because the agent does not choose to create such an instance when the corresponding RowStatus instance does not exist, or inconsistentValue: if the supplied value is inconsistent with the state of some other MIB object's value, or noError: because the agent chooses to create the instance. If noError is returned, then the instance of the status column must also be created, and the new state is B or C, depending on the information available to the agent. If inconsistentName or inconsistentValue is returned, the row remains in state A. (5) depending on the MIB definition for the column/table, either noError or inconsistentValue may be returned. NOTE: Other processing of the set request may result in a response other than noError being returned, e.g., wrongValue, noCreation, etc. Conceptual Row Creation There are four potential interactions when creating a conceptual row: selecting an instance-identifier which is not in use; creating the conceptual row; initializing any objects for which the agent does not supply a default; and, making the conceptual row available for use by the managed device. Interaction 1: Selecting an Instance-Identifier The algorithm used to select an instance-identifier varies for each conceptual row. In some cases, the instance- identifier is semantically significant, e.g., the destination address of a route, and a management station selects the instance-identifier according to the semantics. In other cases, the instance-identifier is used solely to distinguish conceptual rows, and a management station without specific knowledge of the conceptual row might examine the instances present in order to determine an unused instance-identifier. (This approach may be used, but it is often highly sub-optimal; however, it is also a questionable practice for a naive management station to attempt conceptual row creation.) Alternately, the MIB module which defines the conceptual row might provide one or more objects which provide assistance in determining an unused instance-identifier. For example, if the conceptual row is indexed by an integer-value, then an object having an integer-valued SYNTAX clause might be defined for such a purpose, allowing a management station to issue a management protocol retrieval operation. In order to avoid unnecessary collisions between competing management stations, `adjacent' retrievals of this object should be different. Finally, the management station could select a pseudo-random number to use as the index. In the event that this index was already in use and an inconsistentValue was returned in response to the management protocol set operation, the management station should simply select a new pseudo-random number and retry the operation. A MIB designer should choose between the two latter algorithms based on the size of the table (and therefore the efficiency of each algorithm). For tables in which a large number of entries are expected, it is recommended that a MIB object be defined that returns an acceptable index for creation. For tables with small numbers of entries, it is recommended that the latter pseudo-random index mechanism be used. Interaction 2: Creating the Conceptual Row Once an unused instance-identifier has been selected, the management station determines if it wishes to create and activate the conceptual row in one transaction or in a negotiated set of interactions. Interaction 2a: Creating and Activating the Conceptual Row The management station must first determine the column requirements, i.e., it must determine those columns for which it must or must not provide values. Depending on the complexity of the table and the management station's knowledge of the agent's capabilities, this determination can be made locally by the management station. Alternately, the management station issues a management protocol get operation to examine all columns in the conceptual row that it wishes to create. In response, for each column, there are three possible outcomes: - a value is returned, indicating that some other management station has already created this conceptual row. We return to interaction 1. - the exception `noSuchInstance' is returned, indicating that the agent implements the object-type associated with this column, and that this column in at least one conceptual row would be accessible in the MIB view used by the retrieval were it to exist. For those columns to which the agent provides read-create access, the `noSuchInstance' exception tells the management station that it should supply a value for this column when the conceptual row is to be created. - the exception `noSuchObject' is returned, indicating that the agent does not implement the object-type associated with this column or that there is no conceptual row for which this column would be accessible in the MIB view used by the retrieval. As such, the management station can not issue any management protocol set operations to create an instance of this column. Once the column requirements have been determined, a management protocol set operation is accordingly issued. This operation also sets the new instance of the status column to `createAndGo'. When the agent processes the set operation, it verifies that it has sufficient information to make the conceptual row available for use by the managed device. The information available to the agent is provided by two sources: the management protocol set operation which creates the conceptual row, and, implementation-specific defaults supplied by the agent (note that an agent must provide implementation-specific defaults for at least those objects which it implements as read-only). If there is sufficient information available, then the conceptual row is created, a `noError' response is returned, the status column is set to `active', and no further interactions are necessary (i.e., interactions 3 and 4 are skipped). If there is insufficient information, then the conceptual row is not created, and the set operation fails with an error of `inconsistentValue'. On this error, the management station can issue a management protocol retrieval operation to determine if this was because it failed to specify a value for a required column, or, because the selected instance of the status column already existed. In the latter case, we return to interaction 1. In the former case, the management station can re-issue the set operation with the additional information, or begin interaction 2 again using `createAndWait' in order to negotiate creation of the conceptual row. NOTE WELL Regardless of the method used to determine the column requirements, it is possible that the management station might deem a column necessary when, in fact, the agent will not allow that particular columnar instance to be created or written. In this case, the management protocol set operation will fail with an error such as `noCreation' or `notWritable'. In this case, the management station decides whether it needs to be able to set a value for that particular columnar instance. If not, the management station re-issues the management protocol set operation, but without setting a value for that particular columnar instance; otherwise, the management station aborts the row creation algorithm. Interaction 2b: Negotiating the Creation of the Conceptual Row The management station issues a management protocol set operation which sets the desired instance of the status column to `createAndWait'. If the agent is unwilling to process a request of this sort, the set operation fails with an error of `wrongValue'. (As a consequence, such an agent must be prepared to accept a single management protocol set operation, i.e., interaction 2a above, containing all of the columns indicated by its column requirements.) Otherwise, the conceptual row is created, a `noError' response is returned, and the status column is immediately set to either `notInService' or `notReady', depending on whether it has sufficient information to make the conceptual row available for use by the managed device. If there is sufficient information available, then the status column is set to `notInService'; otherwise, if there is insufficient information, then the status column is set to `notReady'. Regardless, we proceed to interaction 3. Interaction 3: Initializing non-defaulted Objects The management station must now determine the column requirements. It issues a management protocol get operation to examine all columns in the created conceptual row. In the response, for each column, there are three possible outcomes: - a value is returned, indicating that the agent implements the object-type associated with this column and had sufficient information to provide a value. For those columns to which the agent provides read-create access (and for which the agent allows their values to be changed after their creation), a value return tells the management station that it may issue additional management protocol set operations, if it desires, in order to change the value associated with this column. - the exception `noSuchInstance' is returned, indicating that the agent implements the object-type associated with this column, and that this column in at least one conceptual row would be accessible in the MIB view used by the retrieval were it to exist. However, the agent does not have sufficient information to provide a value, and until a value is provided, the conceptual row may not be made available for use by the managed device. For those columns to which the agent provides read-create access, the `noSuchInstance' exception tells the management station that it must issue additional management protocol set operations, in order to provide a value associated with this column. - the exception `noSuchObject' is returned, indicating that the agent does not implement the object-type associated with this column or that there is no conceptual row for which this column would be accessible in the MIB view used by the retrieval. As such, the management station can not issue any management protocol set operations to create an instance of this column. If the value associated with the status column is `notReady', then the management station must first deal with all `noSuchInstance' columns, if any. Having done so, the value of the status column becomes `notInService', and we proceed to interaction 4. Interaction 4: Making the Conceptual Row Available Once the management station is satisfied with the values associated with the columns of the conceptual row, it issues a management protocol set operation to set the status column to `active'. If the agent has sufficient information to make the conceptual row available for use by the managed device, the management protocol set operation succeeds (a `noError' response is returned). Otherwise, the management protocol set operation fails with an error of `inconsistentValue'. NOTE WELL A conceptual row having a status column with value `notInService' or `notReady' is unavailable to the managed device. As such, it is possible for the managed device to create its own instances during the time between the management protocol set operation which sets the status column to `createAndWait' and the management protocol set operation which sets the status column to `active'. In this case, when the management protocol set operation is issued to set the status column to `active', the values held in the agent supersede those used by the managed device. If the management station is prevented from setting the status column to `active' (e.g., due to management station or network failure) the conceptual row will be left in the `notInService' or `notReady' state, consuming resources indefinitely. The agent must detect conceptual rows that have been in either state for an abnormally long period of time and remove them. It is the responsibility of the DESCRIPTION clause of the status column to indicate what an abnormally long period of time would be. This period of time should be long enough to allow for human response time (including `think time') between the creation of the conceptual row and the setting of the status to `active'. In the absense of such information in the DESCRIPTION clause, it is suggested that this period be approximately 5 minutes in length. This removal action applies not only to newly-created rows, but also to previously active rows which are set to, and left in, the notInService state for a prolonged period exceeding that which is considered normal for such a conceptual row. Conceptual Row Suspension When a conceptual row is `active', the management station may issue a management protocol set operation which sets the instance of the status column to `notInService'. If the agent is unwilling to do so, the set operation fails with an error of `wrongValue'. Otherwise, the conceptual row is taken out of service, and a `noError' response is returned. It is the responsibility of the DESCRIPTION clause of the status column to indicate under what circumstances the status column should be taken out of service (e.g., in order for the value of some other column of the same conceptual row to be modified). Conceptual Row Deletion For deletion of conceptual rows, a management protocol set operation is issued which sets the instance of the status column to `destroy'. This request may be made regardless of the current value of the status column (e.g., it is possible to delete conceptual rows which are either `notReady', `notInService' or `active'.) If the operation succeeds, then all instances associated with the conceptual row are immediately removed.

type

type

type

type

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

AP5131 with 1 WAN port, 1 LAN ports.

OBJECT-IDENTITY

AP5131 with 1 WAN port, 1 LAN ports, 533Mhz processor speed.

OBJECT-IDENTITY

AP7131

OBJECT-IDENTITY

AP7181.

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-TYPE

A table that contains the configuration objects for the Authenticator PAE associated with each port. An entry appears in this table for each port that may authenticate access to itself.

OBJECT-TYPE

The configuration information for an Authenticator PAE.

OBJECT-TYPE

The Port number associated with this Port.

OBJECT-TYPE

The current value of the Authenticator PAE state machine.

OBJECT-TYPE

The current state of the Backend Authentication state machine.

OBJECT-TYPE

The current value of the administrative controlled directions parameter for the Port.

OBJECT-TYPE

The current value of the operational controlled directions parameter for the Port.

OBJECT-TYPE

The current value of the controlled Port status parameter for the Port.

OBJECT-TYPE

The current value of the controlled Port control parameter for the Port.

OBJECT-TYPE

The value, in seconds, of the quietPeriod constant currently in use by the Authenticator PAE state machine.

OBJECT-TYPE

The value, in seconds, of the txPeriod constant currently in use by the Authenticator PAE state machine.

OBJECT-TYPE

The value, in seconds, of the suppTimeout constant currently in use by the Backend Authentication state machine.

OBJECT-TYPE

The value, in seconds, of the serverTimeout constant currently in use by the Backend Authentication state machine.

OBJECT-TYPE

The value of the maxReq constant currently in use by the Backend Authentication state machine.

OBJECT-TYPE

The value, in seconds, of the reAuthPeriod constant currently in use by the Reauthentication Timer state machine.

OBJECT-TYPE

The enable/disable control used by the Reauthentication Timer state machine

OBJECT-TYPE

The value of the keyTransmissionEnabled constant currently in use by the Authenticator PAE state machine.

OBJECT-TYPE

A table that contains the statistics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself.

OBJECT-TYPE

The statistics information for an Authenticator PAE.

OBJECT-TYPE

The number of valid EAPOL frames of any type that have been received by this Authenticator.

OBJECT-TYPE

The number of EAPOL frames of any type that have been transmitted by this Authenticator.

OBJECT-TYPE

The number of EAPOL Start frames that have been received by this Authenticator.

OBJECT-TYPE

The number of EAPOL Logoff frames that have been received by this Authenticator.

OBJECT-TYPE

The number of EAP Resp/Id frames that have been received by this Authenticator.

OBJECT-TYPE

The number of valid EAP Response frames (other than Resp/Id frames) that have been received by this Authenticator.

OBJECT-TYPE

The number of EAP Req/Id frames that have been transmitted by this Authenticator.

OBJECT-TYPE

The number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this Authenticator.

OBJECT-TYPE

The number of EAPOL frames that have been received by this Authenticator in which the frame type is not recognized.

OBJECT-TYPE

The number of EAPOL frames that have been received by this Authenticator in which the Packet Body Length field is invalid.

OBJECT-TYPE

The protocol version number carried in the most recently received EAPOL frame.

OBJECT-TYPE

The source MAC address carried in the most recently received EAPOL frame.

OBJECT-TYPE

A table that contains the diagnostics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself.

OBJECT-TYPE

The diagnostics information for an Authenticator PAE.

OBJECT-TYPE

Counts the number of times that the state machine transitions to the CONNECTING state from any other state.

OBJECT-TYPE

Counts the number of times that the state machine transitions from CONNECTING to DISCONNECTED as a result of receiving an EAPOL-Logoff message.

OBJECT-TYPE

Counts the number of times that the state machine transitions from CONNECTING to AUTHENTICATING, as a result of an EAP-Response/Identity message being received from the Supplicant.

OBJECT-TYPE

Counts the number of times that the state machine transitions from AUTHENTICATING to AUTHENTICATED, as a result of the Backend Authentication state machine indicating successful authentication of the Supplicant (authSuccess = TRUE).

OBJECT-TYPE

Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of the Backend Authentication state machine indicating authentication timeout (authTimeout = TRUE).

OBJECT-TYPE

Counts the number of times that the state machine transitions from AUTHENTICATING to HELD, as a result of the Backend Authentication state machine indicating authentication failure (authFail = TRUE).

OBJECT-TYPE

Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of a reauthentication request (reAuthenticate = TRUE).

OBJECT-TYPE

Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Start message being received from the Supplicant.

OBJECT-TYPE

Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Logoff message being received from the Supplicant.

OBJECT-TYPE

Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of a reauthentication request (reAuthenticate = TRUE).

OBJECT-TYPE

Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of an EAPOL-Start message being received from the Supplicant.

OBJECT-TYPE

Counts the number of times that the state machine transitions from AUTHENTICATED to DISCONNECTED, as a result of an EAPOL-Logoff message being received from the Supplicant.

OBJECT-TYPE

Counts the number of times that the state machine sends an initial Access-Request packet to the Authentication server (i.e., executes sendRespToServer on entry to the RESPONSE state). Indicates that the Authenticator attempted communication with the Authentication Server.

OBJECT-TYPE

Counts the number of times that the state machine receives an initial Access-Challenge packet from the Authentication server (i.e., aReq becomes TRUE, causing exit from the RESPONSE state). Indicates that the Authentication Server has communication with the Authenticator.

OBJECT-TYPE

Counts the number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure or Success message) to the Supplicant (i.e., executes txReq on entry to the REQUEST state). Indicates that the Authenticator chose an EAP-method.

OBJECT-TYPE

Counts the number of times that the state machine receives a response from the Supplicant to an initial EAP-Request, and the response is something other than EAP-NAK (i.e., rxResp becomes TRUE, causing the state machine to transition from REQUEST to RESPONSE, and the response is not an EAP-NAK). Indicates that the Supplicant can respond to the Authenticator's chosen EAP-method.

OBJECT-TYPE

Counts the number of times that the state machine receives an EAP-Success message from the Authentication Server (i.e., aSuccess becomes TRUE, causing a transition from RESPONSE to SUCCESS). Indicates that the Supplicant has successfully authenticated to the Authentication Server.

OBJECT-TYPE

Counts the number of times that the state machine receives an EAP-Failure message from the Authentication Server (i.e., aFail becomes TRUE, causing a transition from RESPONSE to FAIL). Indicates that the Supplicant has not authenticated to the Authentication Server.

OBJECT-TYPE

A table that contains the session statistics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself.

OBJECT-TYPE

The session statistics information for an Authenticator PAE. This shows the current values being collected for each session that is still in progress, or the final values for the last valid session on each port where there is no session currently active.

OBJECT-TYPE

The number of octets received in user data frames on this Port during the session.

OBJECT-TYPE

The number of octets transmitted in user data frames on this Port during the session.

OBJECT-TYPE

The number of user data frames received on this Port during the session.

OBJECT-TYPE

The number of user data frames transmitted on this Port during the session.

OBJECT-TYPE

A unique identifier for the session, in the form of a printable ASCII string of at least three characters.

OBJECT-TYPE

The authentication method used to establish the session.

OBJECT-TYPE

The duration of the session in seconds.

OBJECT-TYPE

The reason for the session termination.

OBJECT-TYPE

The User-Name representing the identity of the Supplicant PAE.

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-TYPE

Use apRadioSettingsTable to view and set the properties of the radios.

OBJECT-TYPE

OBJECT-TYPE

Simple index.

OBJECT-TYPE

Row enable.

OBJECT-TYPE

In a system that contains only 1 radio, Radio 1 can be configured for 802.11b/g or 802.11a. In a system that contains 2 radios, Radio 1 will be configured for 802.11b/g and Radio 2 will be configured for 802.11a regardless of the user setting. One will get a set-fail if attempts to make a change. Note that 'aRadio' means an 802.11a standard radio that uses the 5.0 GHz band, and, 'bgRadio' means an 802.11b and 802.11g standards radio that use the 2.4 GHz band. An 802.11n radio can use both 2.4 GHz and/or 5.0 GHz bands, so, both these values are applicable for an 802.11n radio.

OBJECT-TYPE

This scalar points to multiple WLANs that use this radio.

OBJECT-TYPE

Name of Radio. Note that 'radio802dt11a' means an 802.11a standard radio that uses the 5GHz band, and, 'radio802dt11bg' means an 802.11b and 802.11g standards radio that use the 2.4 GHz band. An 802.11n radio can use both 2.4 GHz and/or 5.0 GHz bands, so, both these values are applicable for an 802.11n radio.

OBJECT-TYPE

MAC address of the radio.

OBJECT-TYPE

The antenna diversity setting for the radio. Note that this setting does not apply for an 802.11n radio.

OBJECT-TYPE

Enable support for Short Preamble when MUs associate with the Access Point. Enabling Short Preamble may cause incompatibility with some older clients.

OBJECT-TYPE

The Request To Send(RTS) threshold(in bytes) for use by the radio for the WLAN.

OBJECT-TYPE

Specify a beacon interval in units of 1,000 microseconds (K-us). This is a multiple of the DTIM (apRadioSettingDtimPrd) value, for example, 100 : 10.

OBJECT-TYPE

Specify a period for the Delivery Traffic Indication Message (DTIM). This is a divisor of the beacon interval (in milliseconds), for example, 10 : 100. Note that this object's status is current for 802.11n radios, whereas it is obsolete for a/b/g radios.

OBJECT-TYPE

List of basic rates for the radio. Note that this setting does not apply for an 802.11n radio.

OBJECT-TYPE

List of supported rates for the radio.

OBJECT-TYPE

Radio mode. Note that this setting does not apply for an 802.11n radio. Please use the object apRadioNSettingsMode under apRadioNSettingsTable for 802.11n radios.

OBJECT-TYPE

This QOS parameter is used by the AP for the Background access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Background access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Background access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Background access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Background access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Background access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Best Effort access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Best Effort access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Best Effort access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Best Effort access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Best Effort access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Best Effort access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Video access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Video access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Video access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Video access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Video access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Video access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Voice access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Voice access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Voice access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Voice access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Voice access category.

OBJECT-TYPE

This QOS parameter is used by the AP for the Voice access category.

OBJECT-TYPE

Global ESS to BSS mapping status message.

OBJECT-TYPE

Whether ERP Protection is ON or OFF.

OBJECT-TYPE

Pre-Programmed WMM QOS Parameters. manual - Modify parameters wifi11agn - WiFi 11a/11g/11n defaults wifi11b - WiFi 11b defaults default11agn - Symbol 11a/11g/11n defaults default11b - Symbol 11b defaults voice11agn - Symbol 11a/11g/11n voice params voice11b - Symbol 11b voice params

OBJECT-TYPE

Channel Utilization Beacon Intervals for QBSS Load Element (802.11e)

OBJECT-TYPE

Enable/Disable QBSS Load Element.

OBJECT-TYPE

Use apRadioCfgTable to view and set the radio properties of the Access Points. The process can be broken down into the following steps: 1. Set apRadioCfgReset to TRUE. 2. Set apRadioCfgDesPlacement 3. Get apRadioCfgPosChannel 4. Set apRadioCfgDesChannel 5. Get apRadioCfgPosPowerLevel 6. Set apRadioCfgDesPowerLevel 7. Get apRadioCfgPowerInMW 8. Set and pull progress of apRadioCfgSet 9. Validate the configuration has been set by getting apRadioCfgPlacement apRadioCfgChannel apRadioCfgPowerLevel

OBJECT-TYPE

OBJECT-TYPE

Channel Mode for the Radio. The user is allowed to enter the apRadioDesChannel value only if the Channel Mode is Set to userSelect. The values autoSelect40(4) and uniformSpreading40(5) are applicable only in case of 802.11n radios.

OBJECT-TYPE

The desired placement for radio.

OBJECT-TYPE

The possible channels that can be set when placement = apRadioCfgDesPlacement.

OBJECT-TYPE

The desired channel for radio. Please do not use this object for an access point that supports 802.11n radio. Use apRadioNCfgDesChannel instead.

OBJECT-TYPE

The max possible power level (dBm) that can be set when channel= apRadioCfgDesChannel. The range is 4 to 20 dBm.

OBJECT-TYPE

The desired power level (dBm) for radio. The following power levels are available 4dBm=3mW, 5dBm=3mW, 6dBm=4mW, 7dBm=5mW, 8dBm=6mW, 9dBm=8mW, 10dBm=10mW, 11dBm=13mW, 12dBm=16mW, 13dBm=20mW, 14dBm=25mW, 15dBm=32mW, 16dBm=40mW, 17dBm=50mW, 18dBm=63mW, 19dBm=79mW, 20dBm=100mW Note: Power level allowed depends on radio type, channel and country of operation.

OBJECT-TYPE

apRadioCfgDesPowerLevel in mW.

OBJECT-TYPE

Validate values in apRadioCfgDes_ fields. If it is a valid combination, configure the switch with this combination and set apRadioCfg_ to these values.

OBJECT-TYPE

Reset the following OIDs. apRadioCfgDesPlacement apRadioCfgDesChannel apRadioCfgDesPowerLevel apRadioCfgPosChannel apRadioCfgPosPowerLevel apRadioCfgPowerInMW

OBJECT-TYPE

The placement configuration for radio.

OBJECT-TYPE

The channel configuration for radio.

OBJECT-TYPE

The power level (dBm) configuration for radio.

OBJECT-TYPE

apRadioCfgPowerLevel in mW.

OBJECT-TYPE

WLAN or WIPS sensor operation mode for the Radio.

OBJECT-TYPE

The channels that will be excluded from scanning when channelMode is autoSelect.

OBJECT-TYPE

Table of BSSIDs mapped to WLANs.

OBJECT-TYPE

OBJECT-TYPE

BSSID assigned to this particular WLAN.

OBJECT-TYPE

Use apRadioBssTable to view and set the properties of the Bss's.

OBJECT-TYPE

OBJECT-TYPE

OBJECT-TYPE

Primary WLAN used by the AP to send beacons.

OBJECT-TYPE

Specify a period for the Delivery Traffic Indication Message (DTIM). This is a divisor of the beacon interval (in milliseconds), for example, 10 : 100. Note that BSS DTIM period is not supported for 802.11n radios.

OBJECT-TYPE

The table describes the ESS to BSS mapping status.

OBJECT-TYPE

OBJECT-TYPE

Broadcast/Mulitcast Encryption cipher based on the ESS to BSS mapping.

OBJECT-TYPE

ESS to BSS map status.

OBJECT-TYPE

ESS to BSS map status message.

OBJECT-IDENTITY

OBJECT-TYPE

Table for MESH configuration for Radio.

OBJECT-TYPE

OBJECT-TYPE

MESH base bridge mode for radio.

OBJECT-TYPE

Maximum number of MESH client bridges.

OBJECT-TYPE

MESH client bridge mode for radio.

OBJECT-TYPE

MESH client bridge WLAN. For the value 0 there is no WLAN assigned for Client Bridge connection.

OBJECT-TYPE

Enable/Disable the MESH Auto Connection Select Mode.

OBJECT-TYPE

Mesh Timeout Status.

OBJECT-TYPE

If Mesh is not connected after Timeout period (in seconds), stop the AP from sending beacons.

OBJECT-TYPE

Table of Available Base Bridge MESH connections.

OBJECT-TYPE

OBJECT-TYPE

Simple Index.

OBJECT-TYPE

Mac Address of Available Base Bridge.

OBJECT-TYPE

Channel of Available Base Bridge.

OBJECT-TYPE

RSSI value of Available Base Bridge.

OBJECT-TYPE

Table of Preferred Base Bridge MESH connections.

OBJECT-TYPE

OBJECT-TYPE

Simple Index.

OBJECT-TYPE

Preferred Base Bridge Priority.

OBJECT-TYPE

Preferred Base Bridge MAC Address.

OBJECT-TYPE

Row Status used to add or delete entries.

OBJECT-TYPE

Table of Radio Wlan Bandwidth management.

OBJECT-TYPE

OBJECT-TYPE

The weight to be used when QoS for all WLANs is set to weighted-round-robin. Note that the sum of all weights across all WLANs need not total 100.

OBJECT-TYPE

This table adds 802.11n specific settings for an 'n' radio in addition to the common settings under apRadioSettingsTable.

OBJECT-TYPE

An 802.11n radio settings entry.

OBJECT-TYPE

The modes available for an 802.11n radio depend on the radio band. For 5.0 GHz (11an), the modes are: modeA modeN5000MHz modeAandN For 2.4 GHz (11bgn), the modes are: modeBGandN modeBandG modeGandN modeB modeG modeN2400MHz

OBJECT-TYPE

This is a new setting for 802.11n radios that indicates the HT Protection Status. The possible values are: Pure HT (1) non-HT STA on Channel (2) HT with 20 MHz-only STA (3) non-HT STA associated (4)

OBJECT-TYPE

For basic rate the following options are available: (1) 1 and 2 Mbps (2) 1, 2, 5.5 and 11 Mbps (3) 1, 2, 5.5, 11 and 6, 12, 24 Mbps (4) 6, 12 and 24 Mbps (5) MCS 0-7 (6) 6, 12 and 24 Mbps and MCS 0-7 (7) 1, 2, 5.5, 11 and 6, 12, 24 Mbps and MCS 0-7

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

The possible channels that can be set when placement = apRadioCfgDesPlacement

OBJECT-TYPE

The desired channel for the 'n' radio. When changing 802.11n channels, make changes in the following order: 1) Width (apRadioNCfgChannelWidth) 2) Offset (apRadioNCfgChannelOffset) 3) Channel (apRadioNCfgDesChannel)

OBJECT-TYPE

The channel configuration for the 'n' radio.

OBJECT-TYPE

When this value is set to twentyMhz, the AP works on 20MHz mode for both transmit and receive operations. dynamic: The 20/40 MHz operation is a dynamic feature in which the AP can receive packets from clients that use 20 MHz of bandwidth while transmitting a packet OR that use 40 MHz of bandwidth while transmitting a packet. Likewise, the AP can send packets either with a bandwidth of 20 or 40 MHz. When changing 802.11n channels, make changes in the following order: 1) Width (apRadioNCfgChannelWidth) 2) Offset (apRadioNCfgChannelOffset) 3) Channel (apRadioNCfgDesChannel)

OBJECT-TYPE

The AP will always be enabled to receive AMSDU frames. The user will be able to set the AMSDU limit to 3839 bytes. This value will be advertised in the HT Capabilities element. The user may be able to enable and disable the transmission of AMSDU frames in future releases.

OBJECT-TYPE

When set to TRUE it enables the transmission of AMSDU frames. Setting it to FALSE disable AMSDU transmission. This object is not supported in the current release, hence it will not be returned during a get/get-next/walk.

OBJECT-TYPE

This value is used to tell other stations the maximum length AMPDU that they can send. The allowed values are: 0 bytes (special case, to disable AMPDU rx-limit). 8191 bytes 16383 bytes 32767 bytes 65535 bytes.

OBJECT-TYPE

Used to configure the AMPDU density which controls how close together the MPDU’s are within the AMPDU. The choices are: 0 (none), 1/4 usec, 1/2 usec, 1 usec, 2 usec, 4 usec and 8 usec. Since SNMP cannot represent fractions or decimals, the enumerations are given multiplied by 1000 i.e. in nanoseconds.

OBJECT-TYPE

This is a threshold that controls when the AP will setup a Block ACK agreement with a client to begin aggregating, that is, sending A-MPDU frames, to that client. It takes a range from 0-65535 bytes.

OBJECT-TYPE

This is a boolean. The 802.11n AP has an option to configure short guard interval(SGI). The possible values of guard interval are 400ns or 800ns. When the user turns SGI on, both 400ns and 800ns will be enabled together. When the user turns SGI off, only 800ns will be enabled.

OBJECT-TYPE

When set to TRUE it enables the transmission of AMPDU frames. Setting it to FALSE disable AMPDU transmission.

OBJECT-TYPE

The channel offset. When changing 802.11n channels, make changes in the following order: 1) Width (apRadioNCfgChannelWidth) 2) Offset (apRadioNCfgChannelOffset) 3) Channel (apRadioNCfgDesChannel)

OBJECT-TYPE

The AP with the 802.11n radio supports modulation coding schemes (MCS) 0-15. This maps to the table entries 1-16. To the user, this is part of the Set Rates function.

OBJECT-TYPE

An entry which gives the MCS supported by an 'n' radio in the AP.

OBJECT-TYPE

MCS index, from 1-16, corresponding to schemes 0-15.

OBJECT-TYPE

Rate on 20MHz channel with SGI disabled

OBJECT-TYPE

Rate on 20MHz channel with SGI enabled

OBJECT-TYPE

Rate on 40MHz channel with SGI disabled

OBJECT-TYPE

Rate on 40MHz channel with SGI enabled.

OBJECT-TYPE

Whether this MCS rate is basic or supported.

OBJECT-TYPE

Whether this MCS is disabled (false), or, enabled (true) for this 'n' radio.

OBJECT-IDENTITY

OBJECT-TYPE

Table of wireless LANs configured on the AP.

OBJECT-TYPE

OBJECT-TYPE

Simple index.

OBJECT-TYPE

Name of the WLAN.

OBJECT-TYPE

ESSID of the WLAN.

OBJECT-TYPE

Use either 802.11a radio or 802.11b/g radio, or, for 802.11n radios, select the frequency band i.e. 2.4 GHz or 5.0 GHz.

OBJECT-TYPE

Maximum number of MU associations is allowed for the WLAN. The total number of MUs for the entire AP cannot exceed 127.

OBJECT-TYPE

Point to the ACL policy used for this WLAN.

OBJECT-TYPE

Point to the Security policy used for this WLAN.

OBJECT-TYPE

Point to the QOS policy used for this WLAN.

OBJECT-TYPE

Kerberos Username which is the same as the ESSID if the WLAN uses Kerberos Authentication

OBJECT-TYPE

Kerberos Password for authenticating the AP to the KDC.

OBJECT-TYPE

Set to true to prohibit MU-to-MU communication.

OBJECT-TYPE

Enable the Secure Beacon checkbox to disallow the Access Point from broadcasting an ESSID in its beacons. This is a safeguard to prevent intruders from tapping into the WLAN. Consider this security measure for a private, corporate network.

OBJECT-TYPE

Answer broadcast ESS.

OBJECT-TYPE

The weight to be used when QoS for all WLANs is set to weighted-round-robin. Note that the sum of all weights across all WLANs need not total 100.

OBJECT-TYPE

VLAN mode can either Dynamic or Static.

OBJECT-TYPE

Point to the VLAN id corresponding to WLAN.

OBJECT-TYPE

The LAN to which a WLAN is mapped.

OBJECT-TYPE

Enable/Disable MESH Client Backhaul on this WLAN.

OBJECT-TYPE

Enable or Disable Hotspot functionality on this WLAN.

OBJECT-TYPE

Row enable/disable.

OBJECT-TYPE

Maximum MU idle time in minutes.

OBJECT-TYPE

Security Policy that can be used by different WLANs.

OBJECT-TYPE

OBJECT-TYPE

Simple index.

OBJECT-TYPE

Name of security policy.

OBJECT-TYPE

If auth802dot1xEap, additional EAP settings for this WLAN will be used from the matching entry in the apWlanAuthEapTable. Likewise, if authKerberos, use the settings in the matching entry in the apWlanAuthKerberosTable.

OBJECT-TYPE

If cryptoWep40 or cryptoWep128, additional WEP settings for this WLAN will be used from the matching entry in the apWlanCryptoWepTable. Likewise, if cryptoWpaTkip, use the settings in the matching entry in the apWlanCryptoTkipTable. Likewise, if cryptoKeyguardMcm, use the settings in the matching entry in the apWlanCryptoKeyguardTable. Likewise, if cryptoCcmp, use the settings in the matching entry in the apWlanCryptoCcmpTable.

OBJECT-TYPE

Points to the WLAN which have this particular security policy.

OBJECT-TYPE

Row Status used for Creation or Deletion.

OBJECT-IDENTITY

OBJECT-TYPE

Table of EAP authentication settings for each Security Policy using this method.

OBJECT-TYPE

OBJECT-TYPE

Enable reauthentication.

OBJECT-TYPE

Reauthentication period.

OBJECT-TYPE

Reauthentication max retries.

OBJECT-TYPE

IP address of the primary RADIUS server. Use 127.0.0.1 to use the Local Radius Server on the AP5131.

OBJECT-TYPE

Port number of the primary RADIUS server.

OBJECT-TYPE

Shared secret of the primary RADIUS server.

OBJECT-TYPE

IP address of the secondary RADIUS server. Use 127.0.0.1 to use the Local Radius Server on the AP5131.

OBJECT-TYPE

Port number of the secondary RADIUS server.

OBJECT-TYPE

Shared secret of the secondary RADIUS server.

OBJECT-TYPE

MU quiet period.

OBJECT-TYPE

MU timeout.

OBJECT-TYPE

MU Tx period.

OBJECT-TYPE

MU max retries.

OBJECT-TYPE

Server timeout.

OBJECT-TYPE

Server max retries.

OBJECT-TYPE

Radius Accounting Mode.

OBJECT-TYPE

Radius Accounting MU Timeout value

OBJECT-TYPE

Radius Accounting Number of MU Retries.

OBJECT-TYPE

Syslogging Mode.

OBJECT-TYPE

Syslog Server IP Address.

OBJECT-TYPE

External Radius Accounting Server IP Address.

OBJECT-TYPE

Port number of the external RADIUS server.

OBJECT-TYPE

Shared secret of the external RADIUS server.

OBJECT-TYPE

Table of Kerberos authentication settings for each Security Policy using this method.

OBJECT-TYPE

OBJECT-TYPE

Realm name.

OBJECT-TYPE

Primary KDC server IP addr.

OBJECT-TYPE

Primary KDC port.

OBJECT-TYPE

Backup KDC server IP addr.

OBJECT-TYPE

Backup KDC port.

OBJECT-TYPE

Remote KDC server IP addr.

OBJECT-TYPE

Remote KDC port.

OBJECT-IDENTITY

OBJECT-TYPE

Table of WEP encryption settings for each Security Policy using this method.

OBJECT-TYPE

OBJECT-TYPE

Pass key. If this value is written, the four WepKey1..4 will be overwritten.

OBJECT-TYPE

WEP key #1 exactly 13 octets for WEP-128 (104-bit key); exactly 5 octets for WEP-64 (40-bit key).

OBJECT-TYPE

WEP key #2 exactly 13 octets for WEP-128 (104-bit key); exactly 5 octets for WEP-64 (40-bit key).

OBJECT-TYPE

WEP key #3 exactly 13 octets for WEP-128 (104-bit key); exactly 5 octets for WEP-64 (40-bit key).

OBJECT-TYPE

WEP key #4 exactly 13 octets for WEP-128 (104-bit key); exactly 5 octets for WEP-64 (40-bit key).

OBJECT-TYPE

Specifies which WEP key to use.

OBJECT-TYPE

Allow WEP128 clients

OBJECT-TYPE

Table of WPA-TKIP encryption settings for each Security Policy using this method.

OBJECT-TYPE

OBJECT-TYPE

Use broadcast key rotation.

OBJECT-TYPE

Broadcast key rotation, (if enabled), occurs every this many seconds.

OBJECT-TYPE

Specifies whether to use ASCII Passphrase or 256-bit Hex Key.

OBJECT-TYPE

ASCII Passphrase.

OBJECT-TYPE

WPA/TKIP 256 bit Key. No need to enter key if ASCII passphrase is entered.

OBJECT-TYPE

Allows WPA2 TKIP.

OBJECT-TYPE

Allows Pre-Authentication.

OBJECT-TYPE

Table of WPA2-CCMP encryption settings for each Security Policy using this method.

OBJECT-TYPE

OBJECT-TYPE

Use broadcast key rotation.

OBJECT-TYPE

Broadcast key rotation, (if enabled), occurs every this many seconds.

OBJECT-TYPE

Specifies whether to use ASCII Passphrase or 256-bit Hex Key.

OBJECT-TYPE

ASCII Passphrase.

OBJECT-TYPE

WPA2/CCMP 256 bit Key. No need to enter key if ASCII passphrase is entered.

OBJECT-TYPE

Allow WPA-TKIP clients

OBJECT-TYPE

Enabling this option enables a client associated with one Access Point to carry out an 802.1x authentication with another Access Point before it roams over to it. The Access Point will cache the keying information of the client until it roams to the new Access Point. This enables the roaming the client to start sending and receiving data sooner by not having to do 802.1x authentication after it roams. Note: This option only works when 802.1x authentication is enabled for the WLAN.

OBJECT-TYPE

Table of KeyGuard-MCM encryption settings for each Security Policy using this method.

OBJECT-TYPE

OBJECT-TYPE

Pass key. If this value is written, the four KeyguardKey1..4 will be overwritten.

OBJECT-TYPE

Key #1.

OBJECT-TYPE

Key #2.

OBJECT-TYPE

Key #3.

OBJECT-TYPE

Key #4.

OBJECT-TYPE

Specifies which WEP key to use.

OBJECT-TYPE

Allow WEP128 clients

OBJECT-TYPE

Access Control List that can be used by different WLANs.

OBJECT-TYPE

OBJECT-TYPE

Simple index.

OBJECT-TYPE

Name of the Access Control policy.

OBJECT-TYPE

MUs match this policy can either be Allowed or Denied association.

OBJECT-TYPE

Points to the WLAN which have this particular MU Acl policy.

OBJECT-TYPE

Row Status.

OBJECT-TYPE

Table describing ACLs for allowing or denying, (depending on default behavior for the WLAN specified in apWlanMuAclPolicyTable), MU association with each WLAN.

OBJECT-TYPE

OBJECT-TYPE

Simple index.

OBJECT-TYPE

Starting MAC address in a range of addresses.

OBJECT-TYPE

Ending MAC address in a range of addresses.

OBJECT-TYPE

Pointer to the ACL policy that this row belongs.

OBJECT-TYPE

Row status.

OBJECT-TYPE

QoS Policy that can be used by different WLANs.

OBJECT-TYPE

OBJECT-TYPE

Simple index.

OBJECT-TYPE

Name of the QoS policy.

OBJECT-TYPE

Enable WiFi Multimedia Extension support.

OBJECT-TYPE

Pre-Programmed WMM QOS Parameters. manual - Modify parameters wifi11agn - WiFi 11a/11g/11n defaults wifi11b - WiFi 11b defaults default11agn - Symbol 11a/11g/11n defaults default11b - Symbol 11b defaults voice11agn - Symbol 11a/11g/11n voice params voice11b - Symbol 11b voice params

OBJECT-TYPE

This QoS parameter is to be used by the MU for the Background access category.

OBJECT-TYPE

This QoS parameter is to be used by the MU for the Background access category.

OBJECT-TYPE

This QoS parameter is to be used by the MU for the Background access category.

OBJECT-TYPE

This QoS parameter is to be used by the MU for the Background access category.

OBJECT-TYPE

This QoS parameter is to be used by the MU for the Background access category.

OBJECT-TYPE

This QoS parameter is to be used by the MU for the Best Effort access category.

OBJECT-TYPE

This QoS parameter is to be used by the MU for the Best Effort access category.

OBJECT-TYPE

This QoS parameter is to be used by the MU for the Best Effort access category.

OBJECT-TYPE

This QoS parameter is to be used by the MU for the Best Effort access category.

OBJECT-TYPE

This QoS parameter is to be used by the MU for the Best Effort access category.

OBJECT-TYPE

This QoS parameter is to be used by the MU for the Video access category.

OBJECT-TYPE

This QoS parameter is to be used by the MU for the Video access category.

OBJECT-TYPE

This QoS parameter is to be used by the MU for the Video access category.

OBJECT-TYPE

This QoS parameter is to be used by the MU for the Video access category.

OBJECT-TYPE

This QoS parameter is to be used by the MU for the Video access category.

OBJECT-TYPE

This QoS parameter is to be used by the MU for the Voice access category.

OBJECT-TYPE

This QoS parameter is to be used by the MU for the Voice access category.

OBJECT-TYPE

This QoS parameter is to be used by the MU for the Voice access category.

OBJECT-TYPE

This QoS parameter is to be used by the MU for the Voice access category.

OBJECT-TYPE

This QoS parameter is to be used by the MU for the Voice access category.

OBJECT-TYPE

Support legacy voice prioritization.

OBJECT-TYPE

Multicast address 1.

OBJECT-TYPE

Multicast address 2.

OBJECT-TYPE

Points to the WLAN which have this particular QOS policy.

OBJECT-TYPE

Row Status.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

This variable configures the manner in which bandwidth is shared among the WLANs. Only in mode 'weightedRoundRobin' are the apRadioWlanWeight values for each Radio and WLAN used.

OBJECT-IDENTITY

OBJECT-TYPE

Table for Hotspot configuration.

OBJECT-TYPE

OBJECT-TYPE

Default File Mode for Login, Welcome and Fail Pages.

OBJECT-TYPE

Login Page URL on external server.

OBJECT-TYPE

Welcome Page URL on external server.

OBJECT-TYPE

Fail Page URL on external server.

OBJECT-TYPE

IP Address of Primary Radius Server. Use 127.0.0.1 to use the Local Radius Server on the AP5131.

OBJECT-TYPE

Port for Primary Radius Server.

OBJECT-TYPE

Shared Secret for Primary Radius Server.

OBJECT-TYPE

IP Address of Secondary Radius Server. Use 127.0.0.1 to use the Local Radius Server on the AP5131.

OBJECT-TYPE

Port for Secondary Radius Server.

OBJECT-TYPE

Shared Secret for Secondary Radius Server.

OBJECT-TYPE

Radius Accounting Mode.

OBJECT-TYPE

External Accounting Radius Server.

OBJECT-TYPE

Port for External Accounting Radius Server.

OBJECT-TYPE

Shared Secret for External Accounting Radius Server.

OBJECT-TYPE

Radius Accounting Timeout value.

OBJECT-TYPE

Radius Accounting Retry Count value.

OBJECT-TYPE

Radius Session Timeout Mode (Applicable only for Internal Radius Server)

OBJECT-TYPE

Radius Session Timeout (Applicable only for Internal Radius Server)

OBJECT-TYPE

Table of White List entires for HotSpot for the WLANs.

OBJECT-TYPE

OBJECT-TYPE

Simple Index 1...10

OBJECT-TYPE

IP Address of White List entries

OBJECT-TYPE

Value to control row creation/deletion.

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-TYPE

Enable/disable MU Locationing feature.

OBJECT-TYPE

Setting this value to TRUE clears all apMuLocationingTable entries. Any probe request heard after that event will be treated as newly heard.

OBJECT-TYPE

Maximum number of MU's to be reported in the apMuLocationingTable. The minimum number is 20 and maximum 200.

OBJECT-TYPE

The switch shall store the information received in the probe request messages in this table.

OBJECT-TYPE

Description.

OBJECT-TYPE

Simple index.

OBJECT-TYPE

MAC address of the MU.

OBJECT-TYPE

MAC address of the Portal.

OBJECT-TYPE

Received Signal Strength in dBm by the Heard Portal.

OBJECT-TYPE

Describes on which channel probe is heard.

OBJECT-TYPE

Describes the time when this probe is heard.

OBJECT-TYPE

The switch shall provide option to append information to apMuLocationingTable.

OBJECT-TYPE

Description.

OBJECT-TYPE

MAC address of the MU.

OBJECT-TYPE

MAC address of the Portal.

OBJECT-TYPE

Received Signal Strength in dBm by the Heard Portal.

OBJECT-TYPE

Describes on which channel probe is heard.

OBJECT-TYPE

Describes the time when this probe is heard.

OBJECT-IDENTITY

OBJECT-TYPE

Table of Global IP Filter Policies

OBJECT-TYPE

OBJECT-TYPE

Simple Index

OBJECT-TYPE

IP Filter Policy Name. It has to be unique for every policy.

OBJECT-TYPE

IP Filter Policy Protocol Number.

OBJECT-TYPE

IP Filter Policy Starting Port Number

OBJECT-TYPE

IP Filter Policy Ending Port Number

OBJECT-TYPE

IP Filter Policy Source Start IP Address.

OBJECT-TYPE

IP Filter Policy Source End IP Address.

OBJECT-TYPE

IP Filter Policy Dest Start IP Address.

OBJECT-TYPE

IP Filter Policy Dest End IP Address.

OBJECT-TYPE

Description.Indicates whether filter is used by any of the WLAN IP Filter Tables or the TRUNK IP Filter Table. If got used then displays YES otherwise NO.

OBJECT-TYPE

Row Status for creation and deletion of policies.

OBJECT-TYPE

IP Filter Policy Source Starting Port Number

OBJECT-TYPE

IP Filter Policy Source Ending Port Number

OBJECT-IDENTITY

OBJECT-TYPE

IP Filter for WLAN

OBJECT-TYPE

OBJECT-TYPE

IP Filter Mode.

OBJECT-TYPE

IP Filter Default IN Action.

OBJECT-TYPE

IP Filter Default OUT Action.

OBJECT-TYPE

Number of incoming packets allowed or denied as a result of the default policy

OBJECT-TYPE

Number of outgoing packets allowed or denied as a result of the default policy

OBJECT-TYPE

IP Filter Policy for WLANs.

OBJECT-TYPE

OBJECT-TYPE

Simple Index.

OBJECT-TYPE

Single Pointer to the Global IP Filter Policy.

OBJECT-TYPE

IP Filter Policy Direction.

OBJECT-TYPE

IP Filter Policy Action.

OBJECT-TYPE

Row Status for creation and deletion.

OBJECT-TYPE

Number of packets allowed or denied as a result of this policy.

OBJECT-IDENTITY

OBJECT-TYPE

IP Filter for WLAN

OBJECT-TYPE

OBJECT-TYPE

Description.

OBJECT-TYPE

IP Filter Mode.

OBJECT-TYPE

IP Filter Default IN Action.

OBJECT-TYPE

IP Filter Default OUT Action.

OBJECT-TYPE

Number of incoming packets allowed or denied as a result of the default policy

OBJECT-TYPE

Number of outgoing packets allowed or denied as a result of the default policy.

OBJECT-TYPE

IP Filter Policy for WAN Trunk Port.

OBJECT-TYPE

OBJECT-TYPE

Simple Index.

OBJECT-TYPE

Single Pointer to the Global IP Filter Policy.

OBJECT-TYPE

IP Filter Policy Direction.

OBJECT-TYPE

IP Filter Policy Action.

OBJECT-TYPE

Row Status for creation and deletion.

OBJECT-TYPE

Number of packets allowed or denied as a result of this policy.

OBJECT-IDENTITY

OBJECT-TYPE

Enable / Disable Reliable Multicast feature.

OBJECT-TYPE

WLAN (ESSID) on which reliable multicast feature will be enabled.

OBJECT-TYPE

Maximum number of streams to be serviced by the reliable Multicast Feature.

OBJECT-TYPE

Enable / Disable Standalone mode for Reliable Multicast. In this mode, the AP can operate without a Multicast Router on the network.

OBJECT-TYPE

IGMP version for the queries to be sent. IGMP query is sent on MU association and when standalone mode is enabled.

OBJECT-TYPE

The IGMP query interval (in seconds) to be used in standalone mode.

OBJECT-TYPE

Description.

OBJECT-TYPE

Table of IPv4 Multicast addresses configured for Reliable Multicast

OBJECT-TYPE

Entry of IPv4 Multicast addresses configured for Reliable Multicast

OBJECT-TYPE

Description.

OBJECT-TYPE

IPv4 Multicast Address

OBJECT-TYPE

Row status for Reliable Multicast address table. Set to FALSE to delete a row. Should be TRUE while creating the row.

OBJECT-TYPE

Table of MUs being serviced by the reliable multicast feature.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

IPv4 Multicast Address.

OBJECT-TYPE

Mac Address of Mobile Units.

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-TYPE

Table of Auto Key Setting entries.

OBJECT-TYPE

OBJECT-TYPE

The number of seconds that the security association is valid. This is an augumentation to ccWanVpnKeyAutoTable and this particular column for Security Association Life Time has been added as it was missing from the WS2000 MIB.

OBJECT-IDENTITY

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-IDENTITY

OBJECT-TYPE

Wan Ethernet Port Auto-Negotiation Value.

OBJECT-TYPE

Wan Ethernet Port Speed Value. AP5131 does not support oneGbps.

OBJECT-TYPE

Wan Ethernet Port Duplex Value.

OBJECT-IDENTITY

OBJECT-TYPE

Enable/Disable DynDNS feature on WAN interface.

OBJECT-TYPE

Table of DynDNS configuration entries.

OBJECT-TYPE

Description.

OBJECT-TYPE

DynDNS Username which is used to access DynDNS service. The user has to create an account in the DynDNS.org site to get a username and password.

OBJECT-TYPE

DynDNS Password used to access DynDNS service. The user has to create an account in the DynDNS.org site to get a username and password

OBJECT-TYPE

DynDNS Hostname which has be linked to the WAN IP address. The hostname entry has to be made in the DynDNS.org site.

OBJECT-TYPE

Index for apWanDynDNSTable.

OBJECT-TYPE

Table to display the DynDNS update respone.

OBJECT-TYPE

Description.

OBJECT-TYPE

The DynDNS hostname which is linked to the WAN IP Address in the DynDNS.org database.

OBJECT-TYPE

The WAN IP address which is linked with the hostname in the DynDNS.org site.

OBJECT-TYPE

DynDNS update response received from the DynDNS.org.

OBJECT-TYPE

Index for apWanDynDNSUpdateResponseTable.

OBJECT-TYPE

Perform Manual DynDNS Update. An update request to update the WAN IP and hostname is sent to DynDNS.org.

OBJECT-IDENTITY

OBJECT-TYPE

Enable LAN port.

OBJECT-TYPE

LAN Timeout Status

OBJECT-TYPE

If LAN is not connected after Timeout period (in seconds), stop the AP from sending beacons.

OBJECT-TYPE

Enable VLAN.

OBJECT-TYPE

Management VLAN Tag.

OBJECT-TYPE

Native VLAN Tag.

OBJECT-IDENTITY

OBJECT-TYPE

802.1x AP Authentication username.

OBJECT-TYPE

802.1x AP Authentication password.

OBJECT-IDENTITY

OBJECT-TYPE

Table of VLAN entries.

OBJECT-TYPE

OBJECT-TYPE

Simple Index (1...16)

OBJECT-TYPE

VLAN id.

OBJECT-TYPE

VLAN name.

OBJECT-TYPE

Pointer to WLAN associated with this particular VLAN.

OBJECT-TYPE

Row Status.

OBJECT-IDENTITY

OBJECT-TYPE

Table of Subnets.

OBJECT-TYPE

OBJECT-TYPE

Specifies how Subnet gets its IP address/mask.

OBJECT-TYPE

Enable VLAN.

OBJECT-TYPE

Packets can either be Forwarded or Discarded.

OBJECT-TYPE

Management VLAN Tag.

OBJECT-TYPE

Native VLAN Tag.

OBJECT-TYPE

Packets can either be Forwarded or Discarded.

OBJECT-TYPE

Table describing ACLs for allowing or denying, (depending on default behavior for the WLAN specified in apLanTypeFilterAccessMode), MU association with each WLAN.

OBJECT-TYPE

OBJECT-TYPE

Subnet Index for Type Filter

OBJECT-TYPE

Simple index.

OBJECT-TYPE

Ethernet type to be filtered.

OBJECT-TYPE

Row status.

OBJECT-TYPE

The Subnet to which the LAN ethernet port is mapped.

OBJECT-TYPE

Table for Bridge Spanning Tree for a Subnet.

OBJECT-TYPE

OBJECT-TYPE

Bridge Priority

OBJECT-TYPE

Bridge Max Message Age Time.

OBJECT-TYPE

Bridge Hello Time.

OBJECT-TYPE

Bridge Forward Delay.

OBJECT-TYPE

Bridge Forwarding Database Ageout value.

OBJECT-IDENTITY

OBJECT-TYPE

Lan Ethernet Port Auto-Negotiation Value.

OBJECT-TYPE

Lan Ethernet Port Speed Value. AP5131 does not support oneGbps.

OBJECT-TYPE

Lan Ethernet Port Duplex Value.

OBJECT-IDENTITY

OBJECT-TYPE

Ping Destination MU Mac Address. This address has to match one of the MU's in the ccMUInfo table.

OBJECT-TYPE

Ping Destination AP Mac Address. This address has to match one of the AP's in apKnownApTable.

OBJECT-TYPE

The destination type of the ping. It can be either an MU or an AP.

OBJECT-TYPE

Number of pings.

OBJECT-TYPE

Length of the Wnmp ping packet.

OBJECT-TYPE

The one-byte data pattern used to fill the Wnmp ping packet.

OBJECT-TYPE

Start and stop ping. Switching from stop to start state will reset apWnmpPingNumResponses to 0.

OBJECT-TYPE

Number of ping responses received from the destination.

OBJECT-IDENTITY

OBJECT-TYPE

Led flash destination AP Mac Address. This address has to match one of the AP's in apKnownApTable.

OBJECT-TYPE

Turn the led action on or off.

OBJECT-IDENTITY

OBJECT-TYPE

Table of Known AP Lists.

OBJECT-TYPE

OBJECT-TYPE

Simple Index.

OBJECT-TYPE

MAC Address of the LAN port

OBJECT-TYPE

IP Address of the LAN port

OBJECT-TYPE

Channel for Radio1 in Dual Radio setup

OBJECT-TYPE

Channel for Radio2 in Dual Radio setup

OBJECT-TYPE

Number of MUs associated.

OBJECT-TYPE

Kilo Bytes in/out per second.

OBJECT-TYPE

The number of combined input and output packets per sec

OBJECT-TYPE

Radio Type of the first radio in Dual Radio setup

OBJECT-TYPE

Radio Type of the second radio in Dual Radio setup

OBJECT-TYPE

Hardware Type.

OBJECT-TYPE

Firmware Version

OBJECT-TYPE

System Name.

OBJECT-TYPE

ESSID of the particular WLAN.

OBJECT-TYPE

Copy Configuration file button. When set to 1 the config file of our AP shall be copied onto the Known AP specified.

OBJECT-TYPE

Whether a copy cfg operation succeeded.

OBJECT-TYPE

Client Bridge MAC Address 1 on Radio 1.

OBJECT-TYPE

Client Bridge MAC Address 2 on Radio 1.

OBJECT-TYPE

Client Bridge MAC Address 3 on Radio 1.

OBJECT-TYPE

Client Bridge MAC Address 1 on Radio 2.

OBJECT-TYPE

Client Bridge MAC Address 2 on Radio 2.

OBJECT-TYPE

Client Bridge MAC Address 3 on Radio 2.

OBJECT-IDENTITY

OBJECT-TYPE

The value true means Hybrid AP Switch Auto Discovery is enabled and false means it is disabled.

OBJECT-TYPE

Hybrid AP Switch Discovery Interface.

OBJECT-TYPE

Table of static IP addresses used in Switch Discovery for Hybrid AP.

OBJECT-TYPE

apSwitchDiscoveryIPAddressEntry

OBJECT-TYPE

Simple Index (1...6)

OBJECT-TYPE

Hybrid AP Switch Discovery IP Address.

OBJECT-TYPE

Simple Row Status.

OBJECT-TYPE

Hybrid AP Switch Discovery Domain Name.

OBJECT-TYPE

Hybrid AP Switch Discovery Port.

OBJECT-TYPE

Hybrid AP Passphrase. Before the AP sends the first packet to request mode and configuration, the switch and the AP should establish a secure link with this pre-shared key or passphrase.

OBJECT-TYPE

This boolean is used by the AP to determine if it needs to establish a secure IPSEC tunnel to the switch.

OBJECT-TYPE

AC Keepalive Period.

OBJECT-TYPE

The adoption state of the hybrid AP.

OBJECT-TYPE

The IP address of the switch that has currently adopted this hybrid AP. If the AP is not adopted it gives the IP address of the switch that last adopted the AP. This value is null if the AP has never been adopted.

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-TYPE

Table of Trap Enable entries.

OBJECT-TYPE

OBJECT-TYPE

Simple Index.

OBJECT-TYPE

Name of the Trap.

OBJECT-TYPE

Enable/Disbale a particular Trap.

OBJECT-TYPE

The max rate at which SNMP traps/notifications will be sent from the switch. If the switch detects a particular condition and it has NOT been at least this many seconds since the last trap/notification, this current event will NOT result in a trap/notification. If this value is set to 0, every such event results in a trap/notification. Factory-default state is 10 [seconds].

OBJECT-IDENTITY

OBJECT-TYPE

This table configures thresholds that can be monitored for - all MUs and/or - all Portals and/or - all WLANs and/or - for the entire switch When a given threshold is crossed, it generates the appropriate corresponding notification, (ccSumStats_: _MU, _Portal, _WLAN, or _Switch). Some thresholds result in notifications when exceeded, and some when the current value sinks below the threshold. This is indicated by the wording of the entry in the entry's _Descr value. In all cases, the summary stat being monitored is the Short value, never the Long value. Note that for thresholds of type thresholdsAvgMuSignal & thresholdsAvgMuNoise, the values being 'watched' are actually negative. In these cases the threshold is specified as a Unsigned32. For example, if you wish to trap on Signal being worse than -75dBm, enter '70'. This works since a user would never want to trap on a threshold of Sinal worse than +10dBm. (SNR is not an issue, since that is a positive value). Any values reported as var-binds in the resultant trap(s) are likewise reported as positive values.

OBJECT-TYPE

The rows/instances in this table occur at the exact same indices as the corresponding monitored data occurs in the _SumStats tables. For example, row #2 / instance .2 represents the threshold(s) for the _PktsPerSec values for MU, Portal, WLAN, and Switch. If a given threshold does not make sense for one of those 4 entities, its corresponding TruthValue will be false.

OBJECT-TYPE

Index into table. Note that specific thresholds occur at specific instance values as denoted by the enumeration values assigned to this variable.

OBJECT-TYPE

Description of the threshold.

OBJECT-TYPE

Units of the threshold.

OBJECT-TYPE

If true, the threshold can be set for MUs. If false, attempting the threshold will return a READ-ONLY.

OBJECT-TYPE

The threshold for all MUs. If 0, no threshold checking is performed.( multipled by 100)

OBJECT-TYPE

If true, the threshold can be set for radio a. If false, attempting the threshold will return a READ-ONLY. Note that this object does not apply to 802.11n radios. Please use either apTrapCtrlSumStatsCanBeSetRadioN2400MHz or apTrapCtrlSumStatsCanBeSetRadioN5000MHz for 802.11n radios.

OBJECT-TYPE

The threshold for radio a. If 0, no threshold checking is performed.( multipled by 100, except for 'No. of MUs associated', index 9) Note that this object does not apply to 802.11n radios. Please use either apTrapCtrlSumStatsThresholdRadioN2400MHz or apTrapCtrlSumStatsThresholdRadioN5000MHz for 802.11n radios.

OBJECT-TYPE

If true, the threshold can be set for radio b/g. If false, attempting the threshold will return a READ-ONLY. Note that this object does not apply to 802.11n radios. Please use either apTrapCtrlSumStatsCanBeSetRadioN2400MHz or apTrapCtrlSumStatsCanBeSetRadioN5000MHz for 802.11n radios.

OBJECT-TYPE

The threshold for radio b/g. If 0, no threshold checking is performed.( multipled by 100, except for 'No. of MUs associated', index 9) Note that this object does not apply to 802.11n radios. Please use either apTrapCtrlSumStatsThresholdRadioN2400MHz or apTrapCtrlSumStatsThresholdRadioN5000MHz for 802.11n radios.

OBJECT-TYPE

If true, the threshold can be set for Wlans. If false, attempting the threshold will return a READ-ONLY.

OBJECT-TYPE

The threshold for all Wlans. If 0, no threshold checking is performed.( multipled by 100, except for 'No. of MUs associated', index 9)

OBJECT-TYPE

If true, the threshold can be set for the entire access point. If false, attempting the threshold will return a READ-ONLY.

OBJECT-TYPE

The threshold for the entire Access Point. If 0, no threshold checking is performed.( multipled by 100, except for 'No. of MUs associated', index 9)

OBJECT-TYPE

If true, the threshold can be set for radio n, 5.0 GHz frequency band. If false, attempting the threshold will return a READ-ONLY.

OBJECT-TYPE

The threshold for radio n, 5.0 GHz frequency band. If 0, no threshold checking is performed.( multipled by 100, except for 'No. of MUs associated', index 9).

OBJECT-TYPE

If true, the threshold can be set for radio n, 2.4 GHz frequency band. If false, attempting the threshold will return a READ-ONLY.

OBJECT-TYPE

The threshold for radio n, 2.4 GHz frequency band. If 0, no threshold checking is performed.( multipled by 100, except for 'No. of MUs associated', index 9).

OBJECT-IDENTITY

OBJECT-TYPE

MU that has been associated.

OBJECT-TYPE

Radio to be which MU has been associated.

OBJECT-TYPE

Dynamic VLAN ID assigned to the MU.

OBJECT-IDENTITY

OBJECT-TYPE

Action taken by the Radios either Shutting Down or Restoring Up.

OBJECT-TYPE

Activity at the LAN port which caused this event to happen.

OBJECT-IDENTITY

OBJECT-TYPE

ESSID for which MIC failure happened.

OBJECT-IDENTITY

OBJECT-TYPE

The MAC Address of the MU which undergoes a state changed on a Hotspot enabled WLAN.

OBJECT-TYPE

The change in the state of an MU associated on a Hotspot enabled WLAN.

OBJECT-IDENTITY

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-TYPE

Detector Mode and Band for RF scan. It can either be specified to A band or BG band. This setting does not apply to 802.11n radios.

OBJECT-TYPE

Detector Mode to scan both A and BG Bands. apRapDetectorMode is used to determine which radio to use. This setting does not apply to 802.11n radios.

OBJECT-IDENTITY

OBJECT-TYPE

Specifies the type and direction of the transfer to perform involving the configuration file.

OBJECT-TYPE

The path to the firmware on the SFTP/TFTP/FTP server. Remember that the type of separator varies depending on the operating system of the server. For Windows, use '\', for Unix use '/'. No path need be specified, (in which case the default directory for the SFTP/TFTP/FTP server will be used); if a path is specified, remember to terminate it with a trailing '/' or '\'.

OBJECT-TYPE

The name, (on the server), of the configuration file to load/store from/to the server.

OBJECT-TYPE

IP address of the server used for a configuration file load/store operation.

OBJECT-TYPE

Username for FTP LoadCfg operations.

OBJECT-TYPE

Password for FTP LoadCfg operations.

OBJECT-TYPE

Set this value to start the configuration file operation. Note that unlike a firmware load, the actual FTP/TFTP/SFTP transfer does begin virtually immediately.

OBJECT-TYPE

This value counts the total number of configuration file transfers completed, (whether they succeed or fail). The SNMP manager should save the value of this counter just before starting a LoadCfg operation, and then wait for this value to increment before checking the Result and/or Success values.

OBJECT-TYPE

This value reflects the result of the most-recent configuration file load/store.

OBJECT-TYPE

The success/failure status of the most recent configuration file load/store.

OBJECT-IDENTITY

OBJECT-TYPE

Clear the WAN stats.

OBJECT-TYPE

Clear the LAN stats. For clearing LAN1 stats set to lan1 (1) and for clearing LAN2 stats set to lan2 (2).

OBJECT-TYPE

Clear the Radio stats.

OBJECT-TYPE

Clear the WLAN stats.

OBJECT-TYPE

Clear the MU stats.

OBJECT-TYPE

Clear the Known AP List.

OBJECT-IDENTITY

OBJECT-TYPE

MESH Bridge Statistics

OBJECT-TYPE

OBJECT-TYPE

Simple Index.

OBJECT-TYPE

MESH Connection Type.

OBJECT-TYPE

MAC Address.

OBJECT-TYPE

WLAN Pointer.

OBJECT-TYPE

Radio Type. 'dot11a' means an 802.11a standard radio that uses the 5GHz band. 'dot11bg' means an 802.11b and 802.11g standards radio that uses the 2.4 GHz band. 'dot11n' means an 802.11n radio can use both 2.4 GHz and/or 5 GHz bands.

OBJECT-TYPE

Throughput (x 100).

OBJECT-TYPE

Average Bit Speed (x 100).

OBJECT-TYPE

Retries (x 100).

OBJECT-TYPE

MESH Wireless Bridge Statistics.

OBJECT-TYPE

OBJECT-TYPE

Simple Index.

OBJECT-TYPE

MAC Address.

OBJECT-TYPE

WLAN Pointer.

OBJECT-TYPE

LAN Pointer.

OBJECT-TYPE

Radio Type. 'dot11a' means an 802.11a standard radio that uses the 5GHz band. 'dot11bg' means an 802.11b and 802.11g standards radio that uses the 2.4 GHz band. 'dot11n' means an 802.11n radio can use both 2.4 GHz and/or 5 GHz bands.

OBJECT-TYPE

Authentication method.

OBJECT-TYPE

Encryption method.

OBJECT-TYPE

Packets received per second.

OBJECT-TYPE

Packets transmitted per second.

OBJECT-TYPE

Total Packets per second.

OBJECT-TYPE

Throughput received (x 100).

OBJECT-TYPE

Throughput transmitted (x 100).

OBJECT-TYPE

Total Throughput (x 100).

OBJECT-TYPE

Average Bit Speed (x 100).

OBJECT-TYPE

Average MU Signal (x 100).

OBJECT-TYPE

Average MU Noise (x 100).

OBJECT-TYPE

Average MU Signal to Noise ratio (x 100).

OBJECT-TYPE

Average Retries (x 100).

OBJECT-TYPE

Percentage of Packets dropped (x 100).

OBJECT-TYPE

Percentage of Undecryptable Packets (x 100).

OBJECT-TYPE

Table of LAN Spanning Tree Statistics.

OBJECT-TYPE

OBJECT-TYPE

Designated Root.

OBJECT-TYPE

Bridge ID.

OBJECT-TYPE

Root Port.

OBJECT-TYPE

Root Path Cost.

OBJECT-TYPE

Bridge Max Message Age.

OBJECT-TYPE

Bridge Hello Time.

OBJECT-TYPE

Bridge Forward Delay.

OBJECT-TYPE

Table of LAN Spanning Tree Port Interface Statistics.

OBJECT-TYPE

OBJECT-TYPE

LAN index.

OBJECT-TYPE

Port Index.

OBJECT-TYPE

Port Name.

OBJECT-TYPE

State of the Port.

OBJECT-TYPE

Path Cost.

OBJECT-TYPE

Designated Root.

OBJECT-TYPE

Designated Bridge.

OBJECT-TYPE

Designated Port.

OBJECT-TYPE

Designated Cost.

OBJECT-IDENTITY

OBJECT-TYPE

APN radio statistics table.

OBJECT-TYPE

APN radio statistics entry.

OBJECT-TYPE

A simple integer index to the apnRadioStatsTable.

OBJECT-TYPE

The BSSID (MAC address) of the radio.

OBJECT-TYPE

The SSID of the AP.

OBJECT-TYPE

The channel number for the radio.

OBJECT-TYPE

The extension channel for the radio, when in 40MHz.

OBJECT-TYPE

The average RSSI of all the antennas combined together.

OBJECT-TYPE

The channel bandwidth mode for the radio.

OBJECT-TYPE

The operational frequency for the radio.

OBJECT-TYPE

Number of packets received by this radio with Short Guard Interval of 400ns.

OBJECT-TYPE

Number of packets received by this radio with Short Guard Interval of 800ns.

OBJECT-TYPE

Number of packets transmitted by this radio with Short Guard Interval of 400ns.

OBJECT-TYPE

Number of packets transmitted by this radio with Short Guard Interval of 800ns.

OBJECT-TYPE

Number of packets received by this radio with channel width 20 MHz.

OBJECT-TYPE

Number of packets received by this radio with channel width 40 MHz.

OBJECT-TYPE

Number of packets transmitted by this radio with channel width 20 MHz.

OBJECT-TYPE

Number of packets transmitted by this radio with channel width 40 MHz.

OBJECT-TYPE

For each 802.11n Portal on the AP, this table describes counts of packets received at each speed.

OBJECT-TYPE

An entry in the portal received packets table.

OBJECT-TYPE

Number of pkts received via this Portal at 1 Mbps.

OBJECT-TYPE

Number of pkts received via this Portal at 2 Mbps.

OBJECT-TYPE

Number of pkts received via this Portal at 5.5 Mbps.

OBJECT-TYPE

Number of pkts received via this Portal at 6 Mbps.

OBJECT-TYPE

Number of pkts received via this Portal at 9 Mbps.

OBJECT-TYPE

Number of pkts received via this Portal at 11 Mbps.

OBJECT-TYPE

Number of pkts received via this Portal at 12 Mbps.

OBJECT-TYPE

Number of pkts received via this Portal at 18 Mbps.

OBJECT-TYPE

Number of pkts received via this Portal at 24 Mbps.

OBJECT-TYPE

Number of pkts received via this Portal at 36 Mbps.

OBJECT-TYPE

Number of pkts received via this Portal at 48 Mbps.

OBJECT-TYPE

Number of pkts received via this Portal at 54 Mbps.

OBJECT-TYPE

Number of pkts received via this Portal at MCS 0 rate.

OBJECT-TYPE

Number of pkts received via this Portal at MCS 1 rate.

OBJECT-TYPE

Number of pkts received via this Portal at MCS 2 rate.

OBJECT-TYPE

Number of pkts received via this Portal at MCS 3 rate.

OBJECT-TYPE

Number of pkts received via this Portal at MCS 4 rate.

OBJECT-TYPE

Number of pkts received via this Portal at MCS 5 rate.

OBJECT-TYPE

Number of pkts received via this Portal at MCS 6 rate.

OBJECT-TYPE

Number of pkts received via this Portal at MCS 7 rate.

OBJECT-TYPE

Number of pkts received via this Portal at MCS 8 rate.

OBJECT-TYPE

Number of pkts received via this Portal at MCS 9 rate.

OBJECT-TYPE

Number of pkts received via this Portal at MCS 10 rate.

OBJECT-TYPE

Number of pkts received via this Portal at MCS 11 rate.

OBJECT-TYPE

Number of pkts received via this Portal at MCS 12 rate.

OBJECT-TYPE

Number of pkts received via this Portal at MCS 13 rate.

OBJECT-TYPE

Number of pkts received via this Portal at MCS 14 rate.

OBJECT-TYPE

Number of pkts received via this Portal at MCS 15 rate.

OBJECT-TYPE

For each 802.11n Portal on the AP, this table describes counts of packets transmitted at each speed.

OBJECT-TYPE

An entry in the portal transmitted packets table.

OBJECT-TYPE

Number of pkts transmitted via this Portal at 1 Mbps.

OBJECT-TYPE

Number of pkts transmitted via this Portal at 2 Mbps.

OBJECT-TYPE

Number of pkts transmitted via this Portal at 5.5 Mbps.

OBJECT-TYPE

Number of pkts transmitted via this Portal at 6 Mbps.

OBJECT-TYPE

Number of pkts transmitted via this Portal at 9 Mbps.

OBJECT-TYPE

Number of pkts transmitted via this Portal at 11 Mbps.

OBJECT-TYPE

Number of pkts transmitted via this Portal at 12 Mbps.

OBJECT-TYPE

Number of pkts transmitted via this Portal at 18 Mbps.

OBJECT-TYPE

Number of pkts transmitted via this Portal at 24 Mbps.

OBJECT-TYPE

Number of pkts transmitted via this Portal at 36 Mbps.

OBJECT-TYPE

Number of pkts transmitted via this Portal at 48 Mbps.

OBJECT-TYPE

Number of pkts transmitted via this Portal at 54 Mbps.

OBJECT-TYPE

Number of pkts transmitted via this Portal at MCS 0 rate.

OBJECT-TYPE

Number of pkts transmitted via this Portal at MCS 1 rate.

OBJECT-TYPE

Number of pkts transmitted via this Portal at MCS 2 rate.

OBJECT-TYPE

Number of pkts transmitted via this Portal at MCS 3 rate.

OBJECT-TYPE

Number of pkts transmitted via this Portal at MCS 4 rate.

OBJECT-TYPE

Number of pkts transmitted via this Portal at MCS 5 rate.

OBJECT-TYPE

Number of pkts transmitted via this Portal at MCS 6 rate.

OBJECT-TYPE

Number of pkts transmitted via this Portal at MCS 7 rate.

OBJECT-TYPE

Number of pkts transmitted via this Portal at MCS 8 rate.

OBJECT-TYPE

Number of pkts transmitted via this Portal at MCS 9 rate.

OBJECT-TYPE

Number of pkts transmitted via this Portal at MCS 10 rate.

OBJECT-TYPE

Number of pkts transmitted via this Portal at MCS 11 rate.

OBJECT-TYPE

Number of pkts transmitted via this Portal at MCS 12 rate.

OBJECT-TYPE

Number of pkts transmitted via this Portal at MCS 13 rate.

OBJECT-TYPE

Number of pkts transmitted via this Portal at MCS 14 rate.

OBJECT-TYPE

Number of pkts transmitted via this Portal at MCS 15 rate.

OBJECT-TYPE

For each 802.11n Portal on this AP, this table describes counts of octets received at each speed.

OBJECT-TYPE

An entry in the portal received octets table.

OBJECT-TYPE

Number of octets received via this Portal at 1 Mbps.

OBJECT-TYPE

Number of octets received via this Portal at 2 Mbps.

OBJECT-TYPE

Number of octets received via this Portal at 5.5 Mbps.

OBJECT-TYPE

Number of octets received via this Portal at 6 Mbps.

OBJECT-TYPE

Number of octets received via this Portal at 9 Mbps.

OBJECT-TYPE

Number of octets received via this Portal at 11 Mbps.

OBJECT-TYPE

Number of octets received via this Portal at 12 Mbps.

OBJECT-TYPE

Number of octets received via this Portal at 18 Mbps.

OBJECT-TYPE

Number of octets received via this Portal at 24 Mbps.

OBJECT-TYPE

Number of octets received via this Portal at 36 Mbps.

OBJECT-TYPE

Number of octets received via this Portal at 48 Mbps.

OBJECT-TYPE

Number of octets received via this Portal at 54 Mbps.

OBJECT-TYPE

Number of octets received via this Portal at MCS 0 rate.

OBJECT-TYPE

Number of octets received via this Portal at MCS 1 rate.

OBJECT-TYPE

Number of octets received via this Portal at MCS 2 rate.

OBJECT-TYPE

Number of octets received via this Portal at MCS 3 rate.

OBJECT-TYPE

Number of octets received via this Portal at MCS 4 rate.

OBJECT-TYPE

Number of octets received via this Portal at MCS 5 rate.

OBJECT-TYPE

Number of octets received via this Portal at MCS 6 rate.

OBJECT-TYPE

Number of octets received via this Portal at MCS 7 rate.

OBJECT-TYPE

Number of octets received via this Portal at MCS 8 rate.

OBJECT-TYPE

Number of octets received via this Portal at MCS 9 rate.

OBJECT-TYPE

Number of octets received via this Portal at MCS 10 rate.

OBJECT-TYPE

Number of octets received via this Portal at MCS 11 rate.

OBJECT-TYPE

Number of octets received via this Portal at MCS 12 rate.

OBJECT-TYPE

Number of octets received via this Portal at MCS 13 rate.

OBJECT-TYPE

Description.Number of octets received via this Portal at MCS 14 rate.

OBJECT-TYPE

Number of octets received via this Portal at MCS 15 rate.

OBJECT-TYPE

For each 802.11n Portal on this AP, this table describes counts of octets transmitted at each speed.

OBJECT-TYPE

An entry in the portal transmitted octets table.

OBJECT-TYPE

Number of octets transmitted via this Portal at 1 Mbps.

OBJECT-TYPE

Number of octets transmitted via this Portal at 2 Mbps.

OBJECT-TYPE

Number of octets transmitted via this Portal at 5.5 Mbps.

OBJECT-TYPE

Number of octets transmitted via this Portal at 6 Mbps.

OBJECT-TYPE

Number of octets transmitted via this Portal at 9 Mbps.

OBJECT-TYPE

Number of octets transmitted via this Portal at 11 Mbps.

OBJECT-TYPE

Number of octets transmitted via this Portal at 12 Mbps.

OBJECT-TYPE

Number of octets transmitted via this Portal at 18 Mbps.

OBJECT-TYPE

Number of octets transmitted via this Portal at 24 Mbps.

OBJECT-TYPE

Number of octets transmitted via this Portal at 36 Mbps.

OBJECT-TYPE

Number of octets transmitted via this Portal at 48 Mbps.

OBJECT-TYPE

Number of octets transmitted via this Portal at 54 Mbps.

OBJECT-TYPE

Number of octets transmitted via this Portal at MCS 0 rate.

OBJECT-TYPE

Number of octets transmitted via this Portal at MCS 1 rate.

OBJECT-TYPE

Number of octets transmitted via this Portal at MCS 2 rate.

OBJECT-TYPE

Number of octets transmitted via this Portal at MCS 3 rate.

OBJECT-TYPE

Number of octets transmitted via this Portal at MCS 4 rate.

OBJECT-TYPE

Number of octets transmitted via this Portal at MCS 5 rate.

OBJECT-TYPE

Number of octets transmitted via this Portal at MCS 6 rate.

OBJECT-TYPE

Number of octets transmitted via this Portal at MCS 7 rate.

OBJECT-TYPE

Number of octets transmitted via this Portal at MCS 8 rate.

OBJECT-TYPE

Number of octets transmitted via this Portal at MCS 9 rate.

OBJECT-TYPE

Number of octets transmitted via this Portal at MCS 10 rate.

OBJECT-TYPE

Number of octets transmitted via this Portal at MCS 11 rate.

OBJECT-TYPE

Number of octets transmitted via this Portal at MCS 12 rate.

OBJECT-TYPE

Number of octets transmitted via this Portal at MCS 13 rate.

OBJECT-TYPE

Number of octets transmitted via this Portal at MCS 14 rate.

OBJECT-TYPE

Number of octets transmitted via this Portal at MCS 15 rate.

OBJECT-TYPE

For each mobile unit associated to an 802.11n Portal on the AP, this table describes counts of packets received at each speed.

OBJECT-TYPE

OBJECT-TYPE

Number of pkts received via this Portal at 1 and 2 Mbps.

OBJECT-TYPE

Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps.

OBJECT-TYPE

Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps.

OBJECT-TYPE

Number of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.

OBJECT-TYPE

Number of pkts received via this Portal at 6, 12 and 24 Mbps.

OBJECT-TYPE

Number of pkts received via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.

OBJECT-TYPE

Number of pkts received via this Portal at MCS 0 to 7 rates.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

For each mobile unit associated to an 802.11n Portal on the AP, this table describes counts of packets transmitted at each speed.

OBJECT-TYPE

OBJECT-TYPE

Number of pkts transmitted via this Portal at 1 and 2 Mbps.

OBJECT-TYPE

Number of pkts transmitted via this Portal at 1, 2, 5.5 and 11 Mbps.

OBJECT-TYPE

Number of pkts transmitted via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps.

OBJECT-TYPE

Number of pkts transmitted via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.

OBJECT-TYPE

Number of pkts transmitted via this Portal at 6, 12 and 24 Mbps.

OBJECT-TYPE

Number of pkts transmitted via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.

OBJECT-TYPE

Number of pkts transmitted via this Portal at MCS 0 to 7 rates.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

For each mobile unit associated to an 802.11n Portal on the AP, this table describes counts of octets received at each speed.

OBJECT-TYPE

OBJECT-TYPE

Number of octets received via this Portal at 1 and 2 Mbps.

OBJECT-TYPE

Number of octets received via this Portal at 1, 2, 5.5 and 11 Mbps.

OBJECT-TYPE

Number of octets received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps.

OBJECT-TYPE

Number of octets received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.

OBJECT-TYPE

Number of octets received via this Portal at 6, 12 and 24 Mbps.

OBJECT-TYPE

Number of octets received via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.

OBJECT-TYPE

Number of octets received via this Portal at MCS 0 to 7 rates.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

For each mobile unit associated to an 802.11n Portal on the AP, this table describes counts of octets transmitted at each speed.

OBJECT-TYPE

OBJECT-TYPE

Number octets transmitted via this Portal at 1 and 2 Mbps.

OBJECT-TYPE

Number octets transmitted via this Portal at 1, 2, 5.5 and 11 Mbps.

OBJECT-TYPE

Number octets transmitted via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps.

OBJECT-TYPE

Number octets transmitted via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.

OBJECT-TYPE

Number octets transmitted via this Portal at 6, 12 and 24 Mbps.

OBJECT-TYPE

Number octets transmitted via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.

OBJECT-TYPE

Number octets transmitted via this Portal at MCS 0 to 7 rates.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

Description.

OBJECT-TYPE

For each wlan on the 802.11n Portal on the AP, this table describes counts of packets received at each speed.

OBJECT-TYPE

OBJECT-TYPE

Number of pkts received via this Portal at 1 and 2 Mbps.