MIBs Depot

SWL3MGMT-MIB

Registered at
1.3.6.1.4.1.2272.1.201.1.3
Last updated
1900-07-15 00:00
Organization
enterprise, Inc.
Namespace
nortel
Source file
SWL3MGMT-MIB
Digest
sha256:6a039fed54a9117316e87a226348505649da63ade49008dfbbb919f5820ba24b

Description

The Structure of Layer 3 Network Management Information for the proprietary enterprise.

Contact

Customer Service Postal: Tel: E-mail:

Imports

FromSymbols
IF-MIBifIndex
OSPF-MIBAreaID, Metric, TOSType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue
SWPRIMGMT-MIBprivateMgmt

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ATM-TC-MIB
BGP4-MIB
DIFFSERV-DSCP-TC
DIFFSERV-MIB
DVMRP-STD-MIB
IANA-ADDRESS-FAMILY-NUMBERS-MIB
IANA-RTPROTO-MIB
IANAifType-MIB
IEEE8021-SECY-MIB
IF-MIB
IGMP-STD-MIB
INET-ADDRESS-MIB
INTEGRATED-SERVICES-MIB
IP-MIB
IPMROUTE-STD-MIB
IPV6-MIB
IPV6-MLD-MIB
IPV6-TC
LLDP-MIB
MPLS-TC-STD-MIB
MSDP-MIB
OSPF-MIB
RADIUS-DYNAUTH-SERVER-MIB
RAPID-CITY
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
SWL3MGMT-MIB
SWPRIMGMT-MIB
TOKEN-RING-RMON-MIB
VRRP-MIB

Textual conventions

NameOIDSyntaxAccessStatus
NetAddress
type
NodeAddress
type

Objects

NameOIDSyntaxAccessStatus
swL3DevMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.2272.1.201.1.3.1
swL3DevCtrl
OBJECT-IDENTITY
1.3.6.1.4.1.2272.1.201.1.3.1.1
swL3DevCtrlRIPState
OBJECT-TYPE
This object indicates Routing Information Protocol (RIP) version 2 function is enabled or disabled.
1.3.6.1.4.1.2272.1.201.1.3.1.1.1INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3DevCtrlOSPFState
OBJECT-TYPE
This object indicates OSPF protocol is enabled or disabled.
1.3.6.1.4.1.2272.1.201.1.3.1.1.2INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3DevCtrlDVMRPState
OBJECT-TYPE
This object indicates DVMRP protocol is enabled or disabled.
1.3.6.1.4.1.2272.1.201.1.3.1.1.3INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3DevCtrlVRRPState
OBJECT-TYPE
This object indicates VRRP protocol is enabled or disabled.
1.3.6.1.4.1.2272.1.201.1.3.1.1.4INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3DevCtrlVRRPPingVirtualAddrState
OBJECT-TYPE
This object let host can ping the virtual ip address or not. Default is disabled(2).
1.3.6.1.4.1.2272.1.201.1.3.1.1.5INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3IpMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.2272.1.201.1.3.2
swL3IpCtrlMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.2272.1.201.1.3.2.1
swL3IpCtrlTable
OBJECT-TYPE
This table contain IP interface information.
1.3.6.1.4.1.2272.1.201.1.3.2.1.1not-accessiblecurrent
swL3IpCtrlEntry
OBJECT-TYPE
A list of information about a specific IP interface.
1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1not-accessiblecurrent
swL3IpCtrlInterfaceName
OBJECT-TYPE
This object indicates the name of the IP interface.
1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.1DisplayString (SIZE(0..12))read-onlycurrent
swL3IpCtrlIfIndex
OBJECT-TYPE
This object uniquely identifies the IP interface number in the swL3IpCtrlTable.
1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.2INTEGER (0..65535)read-onlycurrent
swL3IpCtrlIpAddr
OBJECT-TYPE
The IP address of the interface. This object only can take the value of the unicast IP address.
1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.3IpAddressread-writecurrent
swL3IpCtrlIpSubnetMask
OBJECT-TYPE
The IP net mask for this interface.
1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.4IpAddressread-writecurrent
swL3IpCtrlVlanName
OBJECT-TYPE
This object indicates the IP control entry's VLAN name. The VLAN name in each entry must be unique in the IP Control Table.
1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.5DisplayString (SIZE(0..32))read-writecurrent
swL3IpCtrlMode
OBJECT-TYPE
This object indicates the IP operation mode. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. manual(2) - the IP address will be set by manual. bootp(3) - the IP address will be set automatically from BOOTP server. dhcp(4) - the IP address will be set automatically from DHCP server.
1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.6INTEGER {other(1), manual(2), bootp(3), dhcp(4)}read-writecurrent
swL3IpCtrlState
OBJECT-TYPE
This variable displays the status of the entry. The status used for creating, modifying, and deleting instances of the objects in this table.
1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.7RowStatusread-createcurrent
swL3IpCtrlOperState
OBJECT-TYPE
The current operational state of the IP interface.
1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.8INTEGER {other(1), up(2), down(3)}read-onlycurrent
swL3IpFdbMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.2272.1.201.1.3.2.2
swL3IpFdbInfoTable
OBJECT-TYPE
A table that contains forwarding and/or filtering information. This information is used by the switch in determining how to propagate the received IP packets.
1.3.6.1.4.1.2272.1.201.1.3.2.2.1not-accessiblecurrent
swL3IpFdbInfoEntry
OBJECT-TYPE
Information about a specific IP address for which the bridge has some forwarding and/or filtering information.
1.3.6.1.4.1.2272.1.201.1.3.2.2.1.1not-accessiblecurrent
swL3IpFdbInfoIpAddr
OBJECT-TYPE
A IP address for which switch has forwarding and/or filtering information.
1.3.6.1.4.1.2272.1.201.1.3.2.2.1.1.1IpAddressread-onlycurrent
swL3IpFdbInfoIpSubnetMask
OBJECT-TYPE
A IP net mask for this interface.for which switch has forwarding and/or filtering information.
1.3.6.1.4.1.2272.1.201.1.3.2.2.1.1.2IpAddressread-onlycurrent
swL3IpFdbInfoPort
OBJECT-TYPE
Either the value '0', or the port number of the port on which packet having a IP address equal to the value of the corresponding instance of swL3IpFdbInfoIpAddr has been seen. A value of '0' indicates that the port number has not been learned but that switch does have some forwarding/filtering information about this address.
1.3.6.1.4.1.2272.1.201.1.3.2.2.1.1.3INTEGER (0..65535)read-onlycurrent
swL3IpFdbInfoType
OBJECT-TYPE
The status of this entry.
1.3.6.1.4.1.2272.1.201.1.3.2.2.1.1.4INTEGER {other(1), static(2), dynamic(3)}read-onlycurrent
swL3IpFilterMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.2272.1.201.1.3.2.3
swL3IpFilterAddrConfig
OBJECT-IDENTITY
1.3.6.1.4.1.2272.1.201.1.3.2.3.1
swL3IpFilterAddrMaxSupportedEntries
OBJECT-TYPE
Maximum number of entries in the IP address filtering table (swL3IpFilterAddrCtrlTable) .
1.3.6.1.4.1.2272.1.201.1.3.2.3.1.1INTEGER (0..65535)read-onlycurrent
swL3IpFilterAddrCurrentTotalEntries
OBJECT-TYPE
Current applied number of entries in the IP address filtering table. If the swL3IpFilterAddrCtrlState = dst-src-addr, then it means there are two entries in swL3IpFilterAddrCtrlTable.
1.3.6.1.4.1.2272.1.201.1.3.2.3.1.2INTEGER (0..65535)read-onlycurrent
swL3IpFilterAddrCtrlTable
OBJECT-TYPE
This table defines information for the device to filter packets with specific IP address (either as the DA and/or as the SA). The IP address can be a unicast address or multicast address. This table has higher priority than both static FDB table and IGMP table. It means that if a IP address appears on this table also appears on the static FDB table, the device will use the information provide by this table to process the packet.
1.3.6.1.4.1.2272.1.201.1.3.2.3.1.3not-accessiblecurrent
swL3IpFilterAddrCtrlEntry
OBJECT-TYPE
A list of information about a specific unicast/multicast IP address for which the switch has filtering information.
1.3.6.1.4.1.2272.1.201.1.3.2.3.1.3.1not-accessiblecurrent
swL3IpFilterAddrIpAddr
OBJECT-TYPE
This object indicates a unicast/multicast IP address for which the switch has filtering information. But if the swL3IpFilterAddrCtrlState = src-addr, then the object can not be a multicast IP address (Class D IP address).
1.3.6.1.4.1.2272.1.201.1.3.2.3.1.3.1.1IpAddressread-onlycurrent
swL3IpFilterAddrCtrlState
OBJECT-TYPE
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. dst-addr(2) - recieved frames's destination address are currently used to be filtered as it meets with the IP address entry of the table. src-addr(3) - recieved frames's source address are currently used to be filtered as it meets with the IP address entry of the table. dst-src-addr(4) - recieved frames's destination address or source address are currently used to be filtered as it meets with the IP address entry of the table. invalid(5) - writing this value to the object, and then the corresponding entry will be removed from the table.
1.3.6.1.4.1.2272.1.201.1.3.2.3.1.3.1.2INTEGER {other(1), dst-addr(2), src-addr(3), dst-src-addr(4), invalid(5)}read-writecurrent
swL3IpArpAgingTime
OBJECT-TYPE
The timeout period in minutes for aging out dynamically learned arp information.
1.3.6.1.4.1.2272.1.201.1.3.2.4INTEGER (0..65535)read-writecurrent
swL3IpStaticRouteTable
OBJECT-TYPE
This entity's IP static Routing table.
1.3.6.1.4.1.2272.1.201.1.3.2.5not-accessiblecurrent
swL3IpStaticRouteEntry
OBJECT-TYPE
A particular route to a particular destination, under a particular policy.
1.3.6.1.4.1.2272.1.201.1.3.2.5.1not-accessiblecurrent
swL3IpStaticRouteDest
OBJECT-TYPE
The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteMask object is not equal to x.
1.3.6.1.4.1.2272.1.201.1.3.2.5.1.1IpAddressread-onlycurrent
swL3IpStaticRouteMask
OBJECT-TYPE
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the swL3IpStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the swL3IpStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteDest object is not equal to swL3IpStaticRouteDest.
1.3.6.1.4.1.2272.1.201.1.3.2.5.1.2IpAddressread-onlycurrent
swL3IpStaticRouteNextHop
OBJECT-TYPE
On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.
1.3.6.1.4.1.2272.1.201.1.3.2.5.1.3IpAddressread-onlycurrent
swL3IpStaticRouteMetric
OBJECT-TYPE
The routing metric for this route.
1.3.6.1.4.1.2272.1.201.1.3.2.5.1.4INTEGER (1..65535)read-createcurrent
swL3IpStaticRouteStatus
OBJECT-TYPE
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table.
1.3.6.1.4.1.2272.1.201.1.3.2.5.1.5INTEGER {other(1), invalid(2), valid(3)}read-createcurrent
swL3IpArpTable
OBJECT-TYPE
The ARP table used for mapping from IP addresses to physical addresses.
1.3.6.1.4.1.2272.1.201.1.3.2.6not-accessiblecurrent
swL3IpArpEntry
OBJECT-TYPE
Each entry contains one IpAddress to `physical' address equivalence.
1.3.6.1.4.1.2272.1.201.1.3.2.6.1not-accessiblecurrent
swL3IpArpIfIndex
OBJECT-TYPE
The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
1.3.6.1.4.1.2272.1.201.1.3.2.6.1.1INTEGERread-onlycurrent
swL3IpArpNetAddress
OBJECT-TYPE
The IpAddress corresponding to the media-dependent `physical' address.
1.3.6.1.4.1.2272.1.201.1.3.2.6.1.2IpAddressread-onlycurrent
swL3IpArpPhysAddress
OBJECT-TYPE
The media-dependent `physical' address.
1.3.6.1.4.1.2272.1.201.1.3.2.6.1.3MacAddressread-createcurrent
swL3IpArpType
OBJECT-TYPE
The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the swL3IpArpTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant swL3IpArpType object.
1.3.6.1.4.1.2272.1.201.1.3.2.6.1.4INTEGER {other(1), invalid(2), dynamic(3), static(4), local(5), local-broadcast(6)}read-createcurrent
swL3IpArpDynamicAgingTime
OBJECT-TYPE
The timeout period in seconds for aging out dynamically learned arp information. If the swL3IpArpType is not dynamic(3), this object will display zero.
1.3.6.1.4.1.2272.1.201.1.3.2.6.1.5INTEGER (0..65535)read-onlycurrent
swL3IpArpReqRateLimitState
OBJECT-TYPE
To enable limit ARP requests trapped to CPU or disabled.
1.3.6.1.4.1.2272.1.201.1.3.2.7INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3IpArpReqRateLimitValue
OBJECT-TYPE
To configure how much frames per second that ARP request limit. This value will be usefull only when swL3IpArpReqRateLimitState is enabled.
1.3.6.1.4.1.2272.1.201.1.3.2.8INTEGER (10..100)read-writecurrent
swL3RelayMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.2272.1.201.1.3.3
swL3RelayBootpMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.2272.1.201.1.3.3.1
swL3RelayBootpState
OBJECT-TYPE
This object indicates BOOTP Relay function is enabled or disabled.
1.3.6.1.4.1.2272.1.201.1.3.3.1.1INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3RelayBootpHopCount
OBJECT-TYPE
This object indicates the maximum number of router hops that the BOOTP packets can cross.
1.3.6.1.4.1.2272.1.201.1.3.3.1.2INTEGER (0..65535)read-writecurrent
swL3RelayBootpTimeThreshold
OBJECT-TYPE
This object indicates the minimum time in seconds within which the switch must relay the BOOTP request. If this time is exceeded, the switch will drop the BOOTP packet.
1.3.6.1.4.1.2272.1.201.1.3.3.1.3INTEGER (0..65535)read-writecurrent
swL3RelayBootpCtrlTable
OBJECT-TYPE
This table specifys the IP address as a destination to forward (relay) BOOTP packets to.
1.3.6.1.4.1.2272.1.201.1.3.3.1.4not-accessiblecurrent
swL3RelayBootpCtrlEntry
OBJECT-TYPE
A list of information specifies the IP address as a destination to forward (relay) BOOTP packets to.
1.3.6.1.4.1.2272.1.201.1.3.3.1.4.1not-accessiblecurrent
swL3RelayBootpCtrlInterfaceName
OBJECT-TYPE
The name of the IP interface.
1.3.6.1.4.1.2272.1.201.1.3.3.1.4.1.1DisplayString (SIZE(0..12))read-onlycurrent
swL3RelayBootpCtrlServer
OBJECT-TYPE
The BOOTP server IP address.
1.3.6.1.4.1.2272.1.201.1.3.3.1.4.1.2IpAddressread-onlycurrent
swL3RelayBootpCtrlState
OBJECT-TYPE
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table.
1.3.6.1.4.1.2272.1.201.1.3.3.1.4.1.3INTEGER {other(1), invalid(2), valid(3)}read-writecurrent
swL3RelayDnsMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.2272.1.201.1.3.3.2
swL3RelayDnsState
OBJECT-TYPE
This object indicates DNS Relay function is enabled or disabled.
1.3.6.1.4.1.2272.1.201.1.3.3.2.1INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3RelayDnsPrimaryServer
OBJECT-TYPE
This object indicates the address of the primary DNS server.
1.3.6.1.4.1.2272.1.201.1.3.3.2.2IpAddressread-writecurrent
swL3RelayDnsSecondaryServer
OBJECT-TYPE
This object indicates the address of the secondary DNS server.
1.3.6.1.4.1.2272.1.201.1.3.3.2.3IpAddressread-writecurrent
swL3RelayDnsCacheState
OBJECT-TYPE
This object indicates DNS Relay cache is enabled or disabled.
1.3.6.1.4.1.2272.1.201.1.3.3.2.4INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3RelayDnsStaticTableState
OBJECT-TYPE
This object indicates DNS Relay static table is enabled or disabled.
1.3.6.1.4.1.2272.1.201.1.3.3.2.5INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3RelayDnsCtrlTable
OBJECT-TYPE
This table display the current DNS relay static table.
1.3.6.1.4.1.2272.1.201.1.3.3.2.6not-accessiblecurrent
swL3RelayDnsCtrlEntry
OBJECT-TYPE
A list of information display the current DNS relay static table.
1.3.6.1.4.1.2272.1.201.1.3.3.2.6.1not-accessiblecurrent
swL3RelayDnsCtrlDomainName
OBJECT-TYPE
The domain name of the entry.
1.3.6.1.4.1.2272.1.201.1.3.3.2.6.1.1DisplayString (SIZE(0..255))read-onlycurrent
swL3RelayDnsCtrlIpAddr
OBJECT-TYPE
The IP address of the entry.
1.3.6.1.4.1.2272.1.201.1.3.3.2.6.1.2IpAddressread-onlycurrent
swL3RelayDnsCtrlState
OBJECT-TYPE
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table.
1.3.6.1.4.1.2272.1.201.1.3.3.2.6.1.3INTEGER {other(1), invalid(2), valid(3)}read-writecurrent
swL3Md5Table
OBJECT-TYPE
This table display the current MD5 key table.
1.3.6.1.4.1.2272.1.201.1.3.4not-accessiblecurrent
swL3Md5Entry
OBJECT-TYPE
A list of information display the current MD5 key table.
1.3.6.1.4.1.2272.1.201.1.3.4.1not-accessiblecurrent
swL3Md5KeyId
OBJECT-TYPE
The MD5 key ID.
1.3.6.1.4.1.2272.1.201.1.3.4.1.1INTEGER (1..255)read-onlycurrent
swL3Md5Key
OBJECT-TYPE
An MD5 password of up to 16 bytes.
1.3.6.1.4.1.2272.1.201.1.3.4.1.2DisplayString (SIZE(1..16))read-writecurrent
swL3Md5State
OBJECT-TYPE
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table.
1.3.6.1.4.1.2272.1.201.1.3.4.1.3INTEGER {other(1), invalid(2), valid(3)}read-writecurrent
swL3RouteRedistriTable
OBJECT-TYPE
Route redistribution allows routers on the network. That are running different routing protocols to exchange routing information. This is accomplished by comparing the routes stored in the vairous router¡¦s routing tables and assinging appropriate metrics. This information is then exchanged among the various routers according to the individual routers current routing protocol.
1.3.6.1.4.1.2272.1.201.1.3.5not-accessiblecurrent
swL3RouteRedistriEntry
OBJECT-TYPE
A list of information display the route redistribution table.
1.3.6.1.4.1.2272.1.201.1.3.5.1not-accessiblecurrent
swL3RouteRedistriSrcProtocol
OBJECT-TYPE
Allows the selection of the protocol of the source device.
1.3.6.1.4.1.2272.1.201.1.3.5.1.1INTEGER {other(1), rip(2), ospf(3), static(4), local(5)}read-onlycurrent
swL3RouteRedistriDstProtocol
OBJECT-TYPE
Allows the selection of the protocol of the destination device.
1.3.6.1.4.1.2272.1.201.1.3.5.1.2INTEGER {other(1), rip(2), ospf(3)}read-onlycurrent
swL3RouteRedistriType
OBJECT-TYPE
Allows the selection of one of the methods for calcalculating the metric value.
1.3.6.1.4.1.2272.1.201.1.3.5.1.3INTEGER {other(1), all(2), type-1(3), type-2(4), internal(5), external(6), inter-E1(7), inter-E2(8), extType1(9), extType2(10)}read-writecurrent
swL3RouteRedistriMetric
OBJECT-TYPE
Allows the entry of an OSPF interface cost. This is analogous to a Hop Count in the RIP routing protocol. The value '0' indicates default value.
1.3.6.1.4.1.2272.1.201.1.3.5.1.4INTEGER (0..16777214)read-writecurrent
swL3RouteRedistriState
OBJECT-TYPE
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table.
1.3.6.1.4.1.2272.1.201.1.3.5.1.5INTEGER {other(1), invalid(2), valid(3)}read-writecurrent
swL3OspfHostTable
OBJECT-TYPE
The list of Hosts, and their metrics, that the router will advertise as host routes.
1.3.6.1.4.1.2272.1.201.1.3.6not-accessiblecurrent
swL3OspfHostEntry
OBJECT-TYPE
A metric to be advertised, for a given type of service, when a given host is reachable.
1.3.6.1.4.1.2272.1.201.1.3.6.1not-accessiblecurrent
swL3OspfHostIpAddress
OBJECT-TYPE
The IP Address of the Host.
1.3.6.1.4.1.2272.1.201.1.3.6.1.1IpAddressread-onlycurrent
swL3OspfHostTOS
OBJECT-TYPE
The Type of Service of the route being configured.
1.3.6.1.4.1.2272.1.201.1.3.6.1.2TOSTyperead-onlycurrent
swL3OspfHostMetric
OBJECT-TYPE
The Metric to be advertised.
1.3.6.1.4.1.2272.1.201.1.3.6.1.3Metricread-writecurrent
swL3OspfHostStatus
OBJECT-TYPE
This variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
1.3.6.1.4.1.2272.1.201.1.3.6.1.4RowStatusread-writecurrent
swL3OspfHostAreaID
OBJECT-TYPE
The Area the Host Entry is to be found within. By default, the area that a subsuming OSPF interface is in, or 0.0.0.0
1.3.6.1.4.1.2272.1.201.1.3.6.1.5AreaIDread-writecurrent
swL3VrrpMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.2272.1.201.1.3.7
swL3VrrpOperTable
OBJECT-TYPE
Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'swL3VrrpOperEntry' items.
1.3.6.1.4.1.2272.1.201.1.3.7.1not-accessiblecurrent
swL3VrrpOperEntry
OBJECT-TYPE
An entry in the swL3VrrpOperTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified by a combination of the IF index and VRID.
1.3.6.1.4.1.2272.1.201.1.3.7.1.1not-accessiblecurrent
swL3VrrpOperVrId
OBJECT-TYPE
This object contains the Virtual Router Identifier (VRID).
1.3.6.1.4.1.2272.1.201.1.3.7.1.1.1INTEGER (1..255)not-accessiblecurrent
swL3VrrpOperCriticalIpAddr
OBJECT-TYPE
To make sure the ip interface connected by this virtual router is alive or not.
1.3.6.1.4.1.2272.1.201.1.3.7.1.1.2IpAddressread-writecurrent
swL3VrrpOperCriticalIpState
OBJECT-TYPE
To enable or disable the feature of critical IP.
1.3.6.1.4.1.2272.1.201.1.3.7.1.1.3INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL3VrrpOperHoldDownTimer
OBJECT-TYPE
When VRRP is started, it need to spend this period of time to let the routing would be leared as well. The unit of this object is second.
1.3.6.1.4.1.2272.1.201.1.3.7.1.1.4INTEGER (0..21600)read-writecurrent
swL3RoutePrefTable
OBJECT-TYPE
IP Route Pref table.
1.3.6.1.4.1.2272.1.201.1.3.8not-accessiblecurrent
swL3RoutePrefEntry
OBJECT-TYPE
An entry of Ip Route Pref Table.
1.3.6.1.4.1.2272.1.201.1.3.8.1not-accessiblecurrent
swL3RoutePrefProtocol
OBJECT-TYPE
Protocol
1.3.6.1.4.1.2272.1.201.1.3.8.1.1INTEGER {isis(1), rip(2), ospfIntra(3), static(4), local(5), bgp(6), staticLow(7), ospfInter(8), ospfExternal(9), ospfExternal1(10), ospfExternal2(11), ospfNssa1(12), ospfNssa2(13)}read-onlycurrent
swL3RoutePrefValue
OBJECT-TYPE
This value is a preference value for the given protocol.
1.3.6.1.4.1.2272.1.201.1.3.8.1.2INTEGER (0..999)read-writecurrent
swL3DvmrpInterfaceTable
OBJECT-TYPE
The (conceptual) table listing the router's multicast- capable interfaces.
1.3.6.1.4.1.2272.1.201.1.3.9not-accessiblecurrent
swL3DvmrpInterfaceEntry
OBJECT-TYPE
An entry (conceptual row) in the swL3DvmrpInterfaceTable.
1.3.6.1.4.1.2272.1.201.1.3.9.1not-accessiblecurrent
swL3DvmrpInterfaceIfIndex
OBJECT-TYPE
The ifIndex value of the interface for which DVMRP is enabled.
1.3.6.1.4.1.2272.1.201.1.3.9.1.1INTEGER (0..65535)not-accessiblecurrent
swL3DvmrpInterfaceNeighborTimeout
OBJECT-TYPE
The time period for DVMRP will hold Neithbor Router reports before issuing poison route messages. The unit is second.
1.3.6.1.4.1.2272.1.201.1.3.9.1.2INTEGER (1..65535)read-writecurrent
swL3DvmrpInterfaceProbe
OBJECT-TYPE
DVMRP defines an extension to IGMP that allows routers to query other routers to determine if a multicast group is present on an given router subnetwork or not. This is referred to as a 'probe'. The unit is second.
1.3.6.1.4.1.2272.1.201.1.3.9.1.3INTEGER (1..65535)read-writecurrent