MIBs Depot

SPSv1-MIB

Registered at
1.3.6.1.4.1.42610
Namespace
bladeshelter
Source file
SPSv1-MIB
Digest
sha256:7b9750b6a9116d55dafb844595414819e38f1b3985c866f52047b456f84a574e

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, enterprises, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
SPSv1-MIB

Objects

NameOIDSyntaxAccessStatus
powertek
OBJECT-IDENTITY
1.3.6.1.4.1.42610
product
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1
pdu
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4
sps
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4
pduObjects
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1
pduIdent
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.1
pduIdentAgentSoftwareVersion
OBJECT-TYPE
The firmware version of the device.
1.3.6.1.4.1.42610.1.4.4.1.1.1DisplayString (SIZE(0..63))read-onlymandatory
pduIdentSerialNumber
OBJECT-TYPE
A Model of this device.
1.3.6.1.4.1.42610.1.4.4.1.1.2DisplayString (SIZE(0..31))read-onlymandatory
pduNetwork
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.2
pduNetworkTcpip
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.2.1
pduNetworkTcpipDhcpControl
OBJECT-TYPE
Enable/disable DHCP protocol
1.3.6.1.4.1.42610.1.4.4.1.2.1.1INTEGER {disabled(1), enabled(2)}read-writemandatory
pduNetworkTcpipIpv4
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.2.1.2
pduNetworkTcpipIpv4Address
OBJECT-TYPE
The ip address that NMS can identify the managed device.
1.3.6.1.4.1.42610.1.4.4.1.2.1.2.1IpAddressread-writemandatory
pduNetworkTcpipIpv4Gateway
OBJECT-TYPE
The default gateway that allow device managed through routers.
1.3.6.1.4.1.42610.1.4.4.1.2.1.2.2IpAddressread-writemandatory
pduNetworkTcpipIpv4Subnet
OBJECT-TYPE
Internet address subnet mask
1.3.6.1.4.1.42610.1.4.4.1.2.1.2.3IpAddressread-writemandatory
pduNetworkTcpipIpv4PrimaryDNS
OBJECT-TYPE
Internet address of Primary DNS Server
1.3.6.1.4.1.42610.1.4.4.1.2.1.2.4IpAddressread-writemandatory
pduNetworkTcpipIpv4SecondaryDNS
OBJECT-TYPE
Internet address of Secondary DNS
1.3.6.1.4.1.42610.1.4.4.1.2.1.2.5IpAddressread-writemandatory
pduNetworkTcpipIpv6
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.2.1.3
pduNetworkTcpipIpv6Control
OBJECT-TYPE
Enable/disable IPv6 protocol
1.3.6.1.4.1.42610.1.4.4.1.2.1.3.1INTEGER {disabled(1), enabled(2)}read-writemandatory
pduNetworkTcpipIpv6AutoConfig
OBJECT-TYPE
IPv6 Auto-config or Maual setting
1.3.6.1.4.1.42610.1.4.4.1.2.1.3.2INTEGER {auto(1), manual(2)}read-writemandatory
pduNetworkTcpipIpv6Address
OBJECT-TYPE
The ipv6 address that NMS can identify the managed device.
1.3.6.1.4.1.42610.1.4.4.1.2.1.3.3DisplayString (SIZE(0..63))read-onlymandatory
pduNetworkTcpipIpv6Prefix
OBJECT-TYPE
The prefix length for ipv6 address.
1.3.6.1.4.1.42610.1.4.4.1.2.1.3.4INTEGERread-onlymandatory
pduNetworkTcpipIpv6Router
OBJECT-TYPE
The default gateway that allow device managed through routers.
1.3.6.1.4.1.42610.1.4.4.1.2.1.3.5DisplayString (SIZE(0..63))read-onlymandatory
pduNetworkTcpipIpv6PrimaryDNS
OBJECT-TYPE
Internet address of Primary DNS Server
1.3.6.1.4.1.42610.1.4.4.1.2.1.3.6DisplayString (SIZE(0..63))read-writemandatory
pduNetworkTcpipIpv6SecondaryDNS
OBJECT-TYPE
Internet address of Secondary DNS
1.3.6.1.4.1.42610.1.4.4.1.2.1.3.7DisplayString (SIZE(0..63))read-writemandatory
pduNetworkSecurity
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.2.2
pduNetworkSecurityControl
OBJECT-TYPE
Enable/disable Network Access Protection
1.3.6.1.4.1.42610.1.4.4.1.2.2.1INTEGER {disabled(1), enabled(2)}read-writemandatory
pduNetworkSecuritySsh
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.2.2.2
pduNetworkSecuritySshControl
OBJECT-TYPE
Enable/disable SSH Access Protection
1.3.6.1.4.1.42610.1.4.4.1.2.2.2.1INTEGER {disabled(1), enabled(2)}read-writemandatory
pduNetworkSecuritySshInterval
OBJECT-TYPE
Detecting Interval of SSH Access Protection
1.3.6.1.4.1.42610.1.4.4.1.2.2.2.2INTEGER {oneMinute(1), fiveMinutes(2), tenMinutes(3), thirtyMinutes(4)}read-writemandatory
pduNetworkSecuritySshFailTimes
OBJECT-TYPE
Unsuccessful attempts of SSH Access Protection
1.3.6.1.4.1.42610.1.4.4.1.2.2.2.3INTEGER {five(1), ten(2), twenty(3), thirty(4), hundred(5)}read-writemandatory
pduNetworkSecuritySshBlock
OBJECT-TYPE
Block Time of SSH Access Protection
1.3.6.1.4.1.42610.1.4.4.1.2.2.2.4INTEGER {fiveMinutes(1), thirtyMinutes(2), oneHour(3), oneDay(4)}read-writemandatory
pduNetworkSecuritySnmp
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.2.2.3
pduNetworkSecuritySnmpControl
OBJECT-TYPE
Enable/disable SNMP Access Protection
1.3.6.1.4.1.42610.1.4.4.1.2.2.3.1INTEGER {disabled(1), enabled(2)}read-writemandatory
pduNetworkSecuritySnmpInterval
OBJECT-TYPE
Detecting Interval of SNMP Access Protection
1.3.6.1.4.1.42610.1.4.4.1.2.2.3.2INTEGER {oneMinute(1), fiveMinutes(2), tenMinutes(3), thirtyMinutes(4)}read-writemandatory
pduNetworkSecuritySnmpFailTimes
OBJECT-TYPE
Unsuccessful attempts of SNMP Access Protection
1.3.6.1.4.1.42610.1.4.4.1.2.2.3.3INTEGER {five(1), ten(2), twenty(3), thirty(4), hundred(5)}read-writemandatory
pduNetworkSecuritySnmpBlock
OBJECT-TYPE
Block Time of SNMP Access Protection
1.3.6.1.4.1.42610.1.4.4.1.2.2.3.4INTEGER {fiveMinutes(1), thirtyMinutes(2), oneHour(3), oneDay(4)}read-writemandatory
pduNetworkSecurityHttp
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.2.2.4
pduNetworkSecurityHttpControl
OBJECT-TYPE
Enable/disable HTTP Access Protection
1.3.6.1.4.1.42610.1.4.4.1.2.2.4.1INTEGER {disabled(1), enabled(2)}read-writemandatory
pduNetworkSecurityHttpInterval
OBJECT-TYPE
Detecting Interval of HTTP Access Protection
1.3.6.1.4.1.42610.1.4.4.1.2.2.4.2INTEGER {oneMinute(1), fiveMinutes(2), tenMinutes(3), thirtyMinutes(4)}read-writemandatory
pduNetworkSecurityHttpFailTimes
OBJECT-TYPE
Unsuccessful attempts of HTTP Access Protection
1.3.6.1.4.1.42610.1.4.4.1.2.2.4.3INTEGER {five(1), ten(2), twenty(3), thirty(4), hundred(5)}read-writemandatory
pduNetworkSecurityHttpBlock
OBJECT-TYPE
Block Time of HTTP Access Protection
1.3.6.1.4.1.42610.1.4.4.1.2.2.4.4INTEGER {fiveMinutes(1), thirtyMinutes(2), oneHour(3), oneDay(4)}read-writemandatory
pduNetworkService
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.2.3
pduNetworkServiceSsh
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.2.3.1
pduNetworkServiceSshControl
OBJECT-TYPE
Enable/disable SSH Server Service
1.3.6.1.4.1.42610.1.4.4.1.2.3.1.1INTEGER {disabled(1), enabled(2)}read-writemandatory
pduNetworkServiceSshPort
OBJECT-TYPE
The Port Number of SSH Server Service
1.3.6.1.4.1.42610.1.4.4.1.2.3.1.2INTEGERread-writemandatory
pduNetworkServiceSsl
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.2.3.2
pduNetworkServiceSslControl
OBJECT-TYPE
Enable/disable HTTPs Server Service
1.3.6.1.4.1.42610.1.4.4.1.2.3.2.1INTEGER {disabled(1), enabled(2)}read-writemandatory
pduNetworkServiceSslPort
OBJECT-TYPE
The Port Number of HTTPs Server Service
1.3.6.1.4.1.42610.1.4.4.1.2.3.2.2INTEGERread-writemandatory
pduNetworkServiceSslForce
OBJECT-TYPE
Force use HTTPs Server Service only.
1.3.6.1.4.1.42610.1.4.4.1.2.3.2.3INTEGER {disabled(1), enabled(2)}read-writemandatory
pduNetworkServicePingControl
OBJECT-TYPE
Enable/disable to response to PING request.
1.3.6.1.4.1.42610.1.4.4.1.2.3.3INTEGER {disabled(1), enabled(2)}read-writemandatory
pduNetworkServiceRadius
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.2.3.4
pduNetworkServiceRadiusControl
OBJECT-TYPE
Enable/disable RADIUS Client Service
1.3.6.1.4.1.42610.1.4.4.1.2.3.4.1INTEGER {disabled(1), enabled(2)}read-writemandatory
pduNetworkServiceRadiusIp
OBJECT-TYPE
The IP Address of RADIUS Client Service
1.3.6.1.4.1.42610.1.4.4.1.2.3.4.2DisplayString (SIZE(0..63))read-writemandatory
pduNetworkServiceRadiusPort
OBJECT-TYPE
The Port Number of RADIUS Client Service
1.3.6.1.4.1.42610.1.4.4.1.2.3.4.3INTEGERread-writemandatory
pduNetworkServiceRadiusSecretKey
OBJECT-TYPE
The Secret Key of RADIUS Client Service
1.3.6.1.4.1.42610.1.4.4.1.2.3.4.4DisplayString (SIZE(0..31))read-writemandatory
pduNetworkServiceRadiusTimeout
OBJECT-TYPE
The Timeout Interval of RADIUS Client Service in seconds
1.3.6.1.4.1.42610.1.4.4.1.2.3.4.5INTEGERread-writemandatory
pduNetworkServiceRadiusRetry
OBJECT-TYPE
The Retry Times of RADIUS Client Service
1.3.6.1.4.1.42610.1.4.4.1.2.3.4.6INTEGERread-writemandatory
pduSystem
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.3
pduSystemName
OBJECT-TYPE
The name of system.
1.3.6.1.4.1.42610.1.4.4.1.3.1DisplayString (SIZE(0..31))read-writemandatory
pduSystemContact
OBJECT-TYPE
The contact of system.
1.3.6.1.4.1.42610.1.4.4.1.3.2DisplayString (SIZE(0..31))read-writemandatory
pduSystemLocation
OBJECT-TYPE
The location of system.
1.3.6.1.4.1.42610.1.4.4.1.3.3DisplayString (SIZE(0..31))read-writemandatory
pduSystemLogInterval
OBJECT-TYPE
The Log Interval of device
1.3.6.1.4.1.42610.1.4.4.1.3.4INTEGERread-writemandatory
pduSystemWebRefresh
OBJECT-TYPE
The Web Refresh Interval of device
1.3.6.1.4.1.42610.1.4.4.1.3.5INTEGER (3..60)read-writemandatory
pduSystemTime
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.3.6
pduSystemTimeDisplay
OBJECT-TYPE
The date/time in agent
1.3.6.1.4.1.42610.1.4.4.1.3.6.1DisplayStringread-onlymandatory
pduSystemTimeZone
OBJECT-TYPE
Time Zone to use when synchronize with NTP server.
1.3.6.1.4.1.42610.1.4.4.1.3.6.2INTEGER {gMT-1200InternationalDateLineWest(1), gMT-1200Eniwetok-Kwajalein(2), gMT-1100MidwayIsland-Samoa(3), gMT-1000Hawaii(4), gMT-0900Alaska(5), gMT-0800PacificTime-Tijuana(6), gMT-0700Arizona-MountainTime(7), gMT-0700Chihuahua-LaPaz-Mazatlan(8), gMT-0700MountainTime(9), gMT-0600CentralAmerica(10), gMT-0600CentralTime(11), gMT-0600Guadalajara-MexicoCity-Monterrey(12), gMT-0600Saskatchewan(13), gMT-0500Bogota-Lima-Quito(14), gMT-0500EasternTime(15), gMT-0500Indiana(16), gMT-0400AtlanticTime(17), gMT-0400Caracas-LaPaz(18), gMT-0400Santiago(19), gMT-0330Newfoundland(20), gMT-0300Brasilia(21), gMT-0300BuenosAires-Georgetown(22), gMT-0300Greenland(23), gMT-0200Mid-Atlantic(24), gMT-0100Azores(25), gMT-0100CapeVerdeIs(26), gMT-0000Casablanca-Monrovia(27), gMT-0000GreenwichMeanTime-Dublin-Edinburgh-Lisbon-London(28), gMT0100Amsterdam-Berlin-Bern-Rome-Stockholm-Vienna(29), gMT0100Belgrade-Bratislava-Budapest-Ljubljana-Prague(30), gMT0100Brussels-Copenhagen-Madrid-Paris(31), gMT0100Sarajevo-Skopje-Warsaw-Zagreb(32), gMT0100WestCentralAfrica(33), gMT0200Athens-Istanbul-Minsk(34), gMT0200Bucharest(35), gMT0200Cairo(36), gMT0200Harare-Pretoria(37), gMT0200Helsinki-Kyiv-Riga-Sofia-Tallinn-Vilnius(38), gMT0200Jerusalem(39), gMT0300Baghdad(40), gMT0300Kuwait-Riyadh(41), gMT0300Moscow-StPetersburg-Volgograd(42), gMT0300Nairobi(43), gMT0330Tehran(44), gMT0400AbuDhabi-Muscat(45), gMT0400Baku-Tbilisi-Yerevan(46), gMT0430Kabul(47), gMT0500Ekaterinburg(48), gMT0500Islamabad-Karachi-Tashkent(49), gMT0530Bombay-Calcutta(50), gMT0530Chennai-Kolkata-Mumbai-NewDelhi(51), gMT0545Kathmandu(52), gMT0600Almaty-Novosibirsk(53), gMT0600Astana-Dhaka(54), gMT0600SriJayawardenepura(55), gMT0630Rangoon(56), gMT0700Bangkok-Hanoi-Jakarta(57), gMT0700Krasnoyarsk(58), gMT0800Beijing-Chongqing-HongKong-Urumqi(59), gMT0800Irkutsk-UlaanBataar(60), gMT0800KualaLumpur-Singapore(61), gMT0800Perth(62), gMT0800Taipei(63), gMT0900Osaka-Sapporo-Tokyo(64), gMT0900Seoul(65), gMT0900Yakutsk(66), gMT0930Adelaide(67), gMT0930Darwin(68), gMT1000Brisbane(69), gMT1000Canberra-Melbourne-Sydney(70), gMT1000Guam-PortMoresby(71), gMT1000Hobart(72), gMT1000Vladivostok(73), gMT1100Magadan-SolomonIs-NewCaledonia(74), gMT1200Auckland-Wellington(75), gMT1200Fiji-Kamchatka-MarshallIs(76), gMT1300NukuAlofa(77)}read-writemandatory
pduSystemTimeFormat
OBJECT-TYPE
Date Format
1.3.6.1.4.1.42610.1.4.4.1.3.6.3INTEGER {mmddyyyy(1), ddmmyyyy(2), yyyymmdd(3)}read-writemandatory
pduSystemTimeSetting
OBJECT-TYPE
Time Setting
1.3.6.1.4.1.42610.1.4.4.1.3.6.4INTEGER {twentyFourHrFormat(1), twelveHrFormat(2)}read-writemandatory
pduSystemTimeDayLightSaving
OBJECT-TYPE
Enable/disable the Day Light Saving when synchronize with NTP server.
1.3.6.1.4.1.42610.1.4.4.1.3.6.5INTEGER {disabled(1), enabled(2)}read-writemandatory
pduSystemTimeManual
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.3.6.6
pduSystemTimeManualDate
OBJECT-TYPE
The date in agent, format is (dd/mm/yyyy)
1.3.6.1.4.1.42610.1.4.4.1.3.6.6.1DisplayString (SIZE(10))read-writemandatory
pduSystemTimeManualTime
OBJECT-TYPE
The time in agent, format is (hh:mm:ss)
1.3.6.1.4.1.42610.1.4.4.1.3.6.6.2DisplayString (SIZE(8))read-writemandatory
pduSystemTimeNtp
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.3.6.7
pduSystemTimeNtpControl
OBJECT-TYPE
Enable or disable the agent to synchronize date/time with NTP server.
1.3.6.1.4.1.42610.1.4.4.1.3.6.7.1INTEGER {enabled(1), disabled(2)}read-writemandatory
pduSystemTimeNtpServer
OBJECT-TYPE
The ip address of NTP server.
1.3.6.1.4.1.42610.1.4.4.1.3.6.7.2DisplayString (SIZE(0..63))read-writemandatory
pduSystemTimeNtpSyncInterval
OBJECT-TYPE
The Sync Interval with NTP server.
1.3.6.1.4.1.42610.1.4.4.1.3.6.7.3INTEGERread-writemandatory
pduSystemTimeNtpSyncUnit
OBJECT-TYPE
The Unit of Sync Interval
1.3.6.1.4.1.42610.1.4.4.1.3.6.7.4INTEGER {day(1), month(2)}read-writemandatory
pduSystemResetToDefault
OBJECT-TYPE
Reset the parameter of PDU to default.
1.3.6.1.4.1.42610.1.4.4.1.3.7INTEGER {nothing(1), reset(2)}read-writemandatory
pduSystemReboot
OBJECT-TYPE
Reboot the system of PDU.
1.3.6.1.4.1.42610.1.4.4.1.3.8INTEGER {nothing(1), reboot(2)}read-writemandatory
pduSNMP
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.4
pduSnmpControl
OBJECT-TYPE
Enable/disable SNMP protocol.
1.3.6.1.4.1.42610.1.4.4.1.4.1INTEGER {disabled(1), enabled(2)}read-writemandatory
pduSnmpPort
OBJECT-TYPE
The UDP port for SNMP.
1.3.6.1.4.1.42610.1.4.4.1.4.2INTEGERread-writemandatory
pduSnmpVersion
OBJECT-TYPE
Set SNMP version.
1.3.6.1.4.1.42610.1.4.4.1.4.3INTEGER {v1(1), v2(2), v3(3)}read-writemandatory
pduSnmpTrapsReceiversTable
OBJECT-TYPE
A list of managers to send traps to. The number of entries is given by the value of pduSnmpNumTrapReceivers
1.3.6.1.4.1.42610.1.4.4.1.4.4not-accessiblemandatory
pduSnmpTrapsReceiversEntry
OBJECT-TYPE
The managers to send traps to.
1.3.6.1.4.1.42610.1.4.4.1.4.4.1not-accessiblemandatory
trapsIndex
OBJECT-TYPE
The index to a trap receiver entry.
1.3.6.1.4.1.42610.1.4.4.1.4.4.1.1INTEGER (0..15)read-onlymandatory
trapsReceiverAddr
OBJECT-TYPE
The IP address of the manager to send a trap to.
1.3.6.1.4.1.42610.1.4.4.1.4.4.1.2DisplayString (SIZE(0..31))read-writemandatory
receiverEventLevel
OBJECT-TYPE
The severity level of traps to be received by this manager.
1.3.6.1.4.1.42610.1.4.4.1.4.4.1.3INTEGER {critical(1), warning(2), informational(3)}read-writemandatory
receiverSnmpVer
OBJECT-TYPE
The SNMP Trap version of trap receivers.
1.3.6.1.4.1.42610.1.4.4.1.4.4.1.4INTEGER {v1(1), v2(2), v3(3)}read-writemandatory
receiverDescription
OBJECT-TYPE
Description of trap receivers
1.3.6.1.4.1.42610.1.4.4.1.4.4.1.5DisplayString (SIZE(0..63))read-writemandatory
pduEmail
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.5
pduEmailServer
OBJECT-TYPE
The address of Email server.
1.3.6.1.4.1.42610.1.4.4.1.5.1DisplayString (SIZE(0..63))read-writemandatory
pduEmailPort
OBJECT-TYPE
The UDP port for Email Server.
1.3.6.1.4.1.42610.1.4.4.1.5.2INTEGERread-writemandatory
pduEmailSenderEmail
OBJECT-TYPE
The sender's Email address
1.3.6.1.4.1.42610.1.4.4.1.5.3DisplayString (SIZE(0..63))read-writemandatory
pduEmailPrefix
OBJECT-TYPE
The prefix string of mail subject
1.3.6.1.4.1.42610.1.4.4.1.5.4DisplayString (SIZE(0..31))read-writemandatory
pduEmailAuthControl
OBJECT-TYPE
Enable/disable SMTP Authentication.
1.3.6.1.4.1.42610.1.4.4.1.5.5INTEGER {disabled(1), enabled(2)}read-writemandatory
pduEmailAuthUsername
OBJECT-TYPE
The user name of SMTP Authentication
1.3.6.1.4.1.42610.1.4.4.1.5.6DisplayString (SIZE(0..31))read-writemandatory
pduEmailAuthPassword
OBJECT-TYPE
The password of SMTP Authentication
1.3.6.1.4.1.42610.1.4.4.1.5.7DisplayString (SIZE(0..31))read-writemandatory
pduEmailReceiversTable
OBJECT-TYPE
A list of managers to send email notification to.
1.3.6.1.4.1.42610.1.4.4.1.5.8not-accessiblemandatory
pduEmailReceiversEntry
OBJECT-TYPE
The managers to send email notification to.
1.3.6.1.4.1.42610.1.4.4.1.5.8.1not-accessiblemandatory
mailRecvIndex
OBJECT-TYPE
The index to a email notification receiver entry.
1.3.6.1.4.1.42610.1.4.4.1.5.8.1.1INTEGER (0..15)read-onlymandatory
mailRecvReceiverAddr
OBJECT-TYPE
The Email address of the manager to send a email notification to.
1.3.6.1.4.1.42610.1.4.4.1.5.8.1.2DisplayString (SIZE(0..63))read-writemandatory
mailRecvEmailType
OBJECT-TYPE
The Email Type of email notification receivers.
1.3.6.1.4.1.42610.1.4.4.1.5.8.1.3INTEGER {none(1), events(2), status(3), both(4)}read-writemandatory
mailRecvEventLevel
OBJECT-TYPE
The severity level of email notification to be received by this manager.
1.3.6.1.4.1.42610.1.4.4.1.5.8.1.4INTEGER {critical(1), warning(2), informational(3)}read-writemandatory
mailRecvDescription
OBJECT-TYPE
Description of email notification receivers
1.3.6.1.4.1.42610.1.4.4.1.5.8.1.5DisplayString (SIZE(0..63))read-writemandatory
pduPwrMonitoring
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.6
pduPwrMonitoringInlet
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.6.1
pduPwrMonitoringInletNum
OBJECT-TYPE
The number of Inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.1INTEGERread-onlymandatory
pduPwrMonitoringInletStatusTable
OBJECT-TYPE
A list to display status of Inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.2not-accessiblemandatory
pduPwrMonitoringInletStatusEntry
OBJECT-TYPE
A list to display status of Inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1not-accessiblemandatory
inletIndex
OBJECT-TYPE
The index to Inlet status entry.
1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.1INTEGER (0..3)read-onlymandatory
inletPowerAll
OBJECT-TYPE
The total power of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.2INTEGERread-onlymandatory
inletResetFrom
OBJECT-TYPE
The reset date of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.3DisplayStringread-onlymandatory
inletEnergy
OBJECT-TYPE
The total energy of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.4INTEGERread-onlymandatory
inletStatus
OBJECT-TYPE
The Status of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.5INTEGER {normal(1), warning(2), critical(3)}read-onlymandatory
inletCurrPhase1
OBJECT-TYPE
The phase1 current of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.6INTEGERread-onlymandatory
inletCurrPhase2
OBJECT-TYPE
The phase2 current of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.7INTEGERread-onlymandatory
inletCurrPhase3
OBJECT-TYPE
The phase3 current of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.8INTEGERread-onlymandatory
inletVoltPhase1
OBJECT-TYPE
The phase1 voltage of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.9INTEGERread-onlymandatory
inletVoltPhase2
OBJECT-TYPE
The phase2 voltage of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.10INTEGERread-onlymandatory
inletVoltPhase3
OBJECT-TYPE
The phase3 voltage of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.11INTEGERread-onlymandatory
inletPwrFactorPhase1
OBJECT-TYPE
The phase1 power factor of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.12INTEGERread-onlymandatory
inletPwrFactorPhase2
OBJECT-TYPE
The phase2 power factor of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.13INTEGERread-onlymandatory
inletPwrFactorPhase3
OBJECT-TYPE
The phase3 power factor of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.14INTEGERread-onlymandatory
inletPowerPhase1
OBJECT-TYPE
The phase1 power of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.15INTEGERread-onlymandatory
inletPowerPhase2
OBJECT-TYPE
The phase2 power of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.16INTEGERread-onlymandatory
inletPowerPhase3
OBJECT-TYPE
The phase3 power of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.17INTEGERread-onlymandatory
inletStatusPhase1
OBJECT-TYPE
The phase1 status of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.18INTEGER {normal(1), warning(2), critical(3)}read-onlymandatory
inletStatusPhase2
OBJECT-TYPE
The phase2 status of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.19INTEGER {normal(1), warning(2), critical(3)}read-onlymandatory
inletStatusPhase3
OBJECT-TYPE
The phase3 status of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.20INTEGER {normal(1), warning(2), critical(3)}read-onlymandatory
pduPwrMonitoringInletCfgTable
OBJECT-TYPE
A list to configure thresholds of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.3not-accessiblemandatory
pduPwrMonitoringInletCfgEntry
OBJECT-TYPE
A list to configure thresholds of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1not-accessiblemandatory
inletCfgIndex
OBJECT-TYPE
The index to inlet configuration entry.
1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.1INTEGER (0..3)read-onlymandatory
inletCfgLoadCritical
OBJECT-TYPE
The Critical Threshold of inlet load.
1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.2INTEGERread-writemandatory
inletCfgLoadWarning
OBJECT-TYPE
The Warning Threshold of inlet load.
1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.3INTEGERread-writemandatory
inletCfgCurrCritPhase1
OBJECT-TYPE
The Critical Threshold of pahse1 current of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.4INTEGERread-writemandatory
inletCfgCurrCritPhase2
OBJECT-TYPE
The Critical Threshold of pahse2 current of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.5INTEGERread-writemandatory
inletCfgCurrCritPhase3
OBJECT-TYPE
The Critical Threshold of pahse3 current of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.6INTEGERread-writemandatory
inletCfgCurrWarnPhase1
OBJECT-TYPE
The Warning Threshold of pahse1 current of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.7INTEGERread-writemandatory
inletCfgCurrWarnPhase2
OBJECT-TYPE
The Warning Threshold of pahse2 current of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.8INTEGERread-writemandatory
inletCfgCurrWarnPhase3
OBJECT-TYPE
The Warning Threshold of pahse3 current of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.9INTEGERread-writemandatory
inletCfgVoltCritPhase1
OBJECT-TYPE
The Critical Threshold of pahse1 voltage of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.10INTEGERread-writemandatory
inletCfgVoltCritPhase2
OBJECT-TYPE
The Critical Threshold of pahse2 voltage of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.11INTEGERread-writemandatory
inletCfgVoltCritPhase3
OBJECT-TYPE
The Critical Threshold of pahse3 voltage of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.12INTEGERread-writemandatory
inletCfgVoltWarnPhase1
OBJECT-TYPE
The Warning Threshold of pahse1 voltage of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.13INTEGERread-writemandatory
inletCfgVoltWarnPhase2
OBJECT-TYPE
The Warning Threshold of pahse2 voltage of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.14INTEGERread-writemandatory
inletCfgVoltWarnPhase3
OBJECT-TYPE
The Warning Threshold of pahse3 voltage of inlet.
1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.15INTEGERread-writemandatory
pduPwrMonitoringOutlet
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.6.2
pduPwrMonitoringOutletPduA
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.6.2.1
pduPwrMonitoringOutletNumPduA
OBJECT-TYPE
The number of PduA Outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.1INTEGERread-onlymandatory
pduPwrMonitoringOutletStatusTablePduA
OBJECT-TYPE
A list to display status of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2not-accessiblemandatory
pduPwrMonitoringOutletStatusPduAEntry
OBJECT-TYPE
A list to display status of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1not-accessiblemandatory
outletPduAIndex
OBJECT-TYPE
The index to outlet status of PduA.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.1INTEGER (0..41)read-onlymandatory
outletPduAState
OBJECT-TYPE
The state of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.2INTEGER {off(1), on(2)}read-onlymandatory
outletPduACurrent
OBJECT-TYPE
The current of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.3INTEGERread-onlymandatory
outletPduAPwrFactor
OBJECT-TYPE
The power factor of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.4INTEGERread-onlymandatory
outletPduAPower
OBJECT-TYPE
The power of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.5INTEGERread-onlymandatory
outletPduAEnergy
OBJECT-TYPE
The energy of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.6INTEGERread-onlymandatory
outletPduAResetFrom
OBJECT-TYPE
The reset date of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.7DisplayStringread-onlymandatory
outletPduAStatus
OBJECT-TYPE
The status of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.8INTEGER {normal(1), warning(2), critical(3)}read-onlymandatory
pduPwrMonitoringOutletCfgTablePduA
OBJECT-TYPE
A list to display configuration of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3not-accessiblemandatory
pduPwrMonitoringOutletCfgPduAEntry
OBJECT-TYPE
A list to display configuration of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1not-accessiblemandatory
outletCfgPduAIndex
OBJECT-TYPE
The index to outlet configuration of PduA.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.1INTEGER (0..41)read-onlymandatory
outletCfgPduAName
OBJECT-TYPE
The name for outlet of PduA.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.2DisplayStringread-writemandatory
outletCfgPduADelayOnStatus
OBJECT-TYPE
The Delay On status of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.3INTEGER {nodelay(1), delay(2)}read-writemandatory
outletCfgPduADelayOnTime
OBJECT-TYPE
The Delay On time of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.4INTEGERread-writemandatory
outletCfgPduADelayOffStatus
OBJECT-TYPE
The Delay Off status of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.5INTEGER {nodelay(1), delay(2)}read-writemandatory
outletCfgPduADelayOffTime
OBJECT-TYPE
The Delay Off time of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.6INTEGERread-writemandatory
outletCfgPduAReboot
OBJECT-TYPE
The Delay On reboot duration of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.7INTEGERread-writemandatory
outletCfgPduAOverCurrCritical
OBJECT-TYPE
The Critical Threshold of current of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.8INTEGERread-writemandatory
outletCfgPduAOverCurrWarning
OBJECT-TYPE
The Warning Threshold of current of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.9INTEGERread-writemandatory
outletCfgPduAOverPwrCritical
OBJECT-TYPE
The Critical Threshold of power of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.10INTEGERread-writemandatory
outletCfgPduAOverPwrWarning
OBJECT-TYPE
The Warning Threshold of power of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.11INTEGERread-writemandatory
pduPwrMonitoringOutletCtlTablePduA
OBJECT-TYPE
A list to display control of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.4not-accessiblemandatory
pduPwrMonitoringOutletCtlPduAEntry
OBJECT-TYPE
A list to display control of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.4.1not-accessiblemandatory
outletCtlPduAIndex
OBJECT-TYPE
The index to outlet control of PduA.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.4.1.1INTEGER (0..41)read-onlymandatory
outletCtlPduAControl
OBJECT-TYPE
The control-type of PduA outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.1.4.1.2INTEGER {immediateOn(1), delayedOn(2), immediateOff(3), delayedOff(4), immediateCycle(5), delayedCycle(6)}read-writemandatory
pduPwrMonitoringOutletPduB
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.6.2.2
pduPwrMonitoringOutletNumPduB
OBJECT-TYPE
The number of PduB Outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.1INTEGERread-onlymandatory
pduPwrMonitoringOutletStatusTablePduB
OBJECT-TYPE
A list to display status of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2not-accessiblemandatory
pduPwrMonitoringOutletStatusPduBEntry
OBJECT-TYPE
A list to display status of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1not-accessiblemandatory
outletPduBIndex
OBJECT-TYPE
The index to outlet status of PduB.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.1INTEGER (0..41)read-onlymandatory
outletPduBState
OBJECT-TYPE
The state of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.2INTEGER {off(1), on(2)}read-onlymandatory
outletPduBCurrent
OBJECT-TYPE
The current of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.3INTEGERread-onlymandatory
outletPduBPwrFactor
OBJECT-TYPE
The power factor of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.4INTEGERread-onlymandatory
outletPduBPower
OBJECT-TYPE
The power of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.5INTEGERread-onlymandatory
outletPduBEnergy
OBJECT-TYPE
The energy of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.6INTEGERread-onlymandatory
outletPduBResetFrom
OBJECT-TYPE
The reset date of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.7DisplayStringread-onlymandatory
outletPduBStatus
OBJECT-TYPE
The status of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.8INTEGER {normal(1), warning(2), critical(3)}read-onlymandatory
pduPwrMonitoringOutletCfgTablePduB
OBJECT-TYPE
A list to display configuration of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3not-accessiblemandatory
pduPwrMonitoringOutletCfgPduBEntry
OBJECT-TYPE
A list to display configuration of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1not-accessiblemandatory
outletCfgPduBIndex
OBJECT-TYPE
The index to outlet configuration of PduB.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.1INTEGER (0..41)read-onlymandatory
outletCfgPduBName
OBJECT-TYPE
The name for outlet of PduB.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.2DisplayStringread-writemandatory
outletCfgPduBDelayOnStatus
OBJECT-TYPE
The Delay On status of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.3INTEGER {nodelay(1), delay(2)}read-writemandatory
outletCfgPduBDelayOnTime
OBJECT-TYPE
The Delay On time of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.4INTEGERread-writemandatory
outletCfgPduBDelayOffStatus
OBJECT-TYPE
The Delay Off status of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.5INTEGER {nodelay(1), delay(2)}read-writemandatory
outletCfgPduBDelayOffTime
OBJECT-TYPE
The Delay Off time of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.6INTEGERread-writemandatory
outletCfgPduBReboot
OBJECT-TYPE
The Delay On reboot duration of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.7INTEGERread-writemandatory
outletCfgPduBOverCurrCritical
OBJECT-TYPE
The Critical Threshold of current of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.8INTEGERread-writemandatory
outletCfgPduBOverCurrWarning
OBJECT-TYPE
The Warning Threshold of current of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.9INTEGERread-writemandatory
outletCfgPduBOverPwrCritical
OBJECT-TYPE
The Critical Threshold of power of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.10INTEGERread-writemandatory
outletCfgPduBOverPwrWarning
OBJECT-TYPE
The Warning Threshold of power of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.11INTEGERread-writemandatory
pduPwrMonitoringOutletCtlTablePduB
OBJECT-TYPE
A list to display control of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.4not-accessiblemandatory
pduPwrMonitoringOutletCtlPduBEntry
OBJECT-TYPE
A list to display control of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.4.1not-accessiblemandatory
outletCtlPduBIndex
OBJECT-TYPE
The index to outlet control of PduB.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.4.1.1INTEGER (0..41)read-onlymandatory
outletCtlPduBControl
OBJECT-TYPE
The control-type of PduB outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.2.4.1.2INTEGER {immediateOn(1), delayedOn(2), immediateOff(3), delayedOff(4), immediateCycle(5), delayedCycle(6)}read-writemandatory
pduPwrMonitoringOutletPduC
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.6.2.3
pduPwrMonitoringOutletNumPduC
OBJECT-TYPE
The number of PduC Outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.1INTEGERread-onlymandatory
pduPwrMonitoringOutletStatusTablePduC
OBJECT-TYPE
A list to display status of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2not-accessiblemandatory
pduPwrMonitoringOutletStatusPduCEntry
OBJECT-TYPE
A list to display status of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1not-accessiblemandatory
outletPduCIndex
OBJECT-TYPE
The index to outlet status of PduC.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.1INTEGER (0..41)read-onlymandatory
outletPduCState
OBJECT-TYPE
The state of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.2INTEGER {off(1), on(2)}read-onlymandatory
outletPduCCurrent
OBJECT-TYPE
The current of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.3INTEGERread-onlymandatory
outletPduCPwrFactor
OBJECT-TYPE
The power factor of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.4INTEGERread-onlymandatory
outletPduCPower
OBJECT-TYPE
The power of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.5INTEGERread-onlymandatory
outletPduCEnergy
OBJECT-TYPE
The energy of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.6INTEGERread-onlymandatory
outletPduCResetFrom
OBJECT-TYPE
The reset date of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.7DisplayStringread-onlymandatory
outletPduCStatus
OBJECT-TYPE
The status of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.8INTEGER {normal(1), warning(2), critical(3)}read-onlymandatory
pduPwrMonitoringOutletCfgTablePduC
OBJECT-TYPE
A list to display configuration of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3not-accessiblemandatory
pduPwrMonitoringOutletCfgPduCEntry
OBJECT-TYPE
A list to display configuration of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1not-accessiblemandatory
outletCfgPduCIndex
OBJECT-TYPE
The index to outlet configuration of PduC.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.1INTEGER (0..41)read-onlymandatory
outletCfgPduCName
OBJECT-TYPE
The name for outlet of PduC.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.2DisplayStringread-writemandatory
outletCfgPduCDelayOnStatus
OBJECT-TYPE
The Delay On status of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.3INTEGER {nodelay(1), delay(2)}read-writemandatory
outletCfgPduCDelayOnTime
OBJECT-TYPE
The Delay On time of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.4INTEGERread-writemandatory
outletCfgPduCDelayOffStatus
OBJECT-TYPE
The Delay Off status of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.5INTEGER {nodelay(1), delay(2)}read-writemandatory
outletCfgPduCDelayOffTime
OBJECT-TYPE
The Delay Off time of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.6INTEGERread-writemandatory
outletCfgPduCReboot
OBJECT-TYPE
The Delay On reboot duration of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.7INTEGERread-writemandatory
outletCfgPduCOverCurrCritical
OBJECT-TYPE
The Critical Threshold of current of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.8INTEGERread-writemandatory
outletCfgPduCOverCurrWarning
OBJECT-TYPE
The Warning Threshold of current of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.9INTEGERread-writemandatory
outletCfgPduCOverPwrCritical
OBJECT-TYPE
The Critical Threshold of power of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.10INTEGERread-writemandatory
outletCfgPduCOverPwrWarning
OBJECT-TYPE
The Warning Threshold of power of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.11INTEGERread-writemandatory
pduPwrMonitoringOutletCtlTablePduC
OBJECT-TYPE
A list to display control of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.4not-accessiblemandatory
pduPwrMonitoringOutletCtlPduCEntry
OBJECT-TYPE
A list to display control of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.4.1not-accessiblemandatory
outletCtlPduCIndex
OBJECT-TYPE
The index to outlet control of PduC.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.4.1.1INTEGER (0..41)read-onlymandatory
outletCtlPduCControl
OBJECT-TYPE
The control-type of PduC outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.3.4.1.2INTEGER {immediateOn(1), delayedOn(2), immediateOff(3), delayedOff(4), immediateCycle(5), delayedCycle(6)}read-writemandatory
pduPwrMonitoringOutletPduD
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.6.2.4
pduPwrMonitoringOutletNumPduD
OBJECT-TYPE
The number of PduD Outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.1INTEGERread-onlymandatory
pduPwrMonitoringOutletStatusTablePduD
OBJECT-TYPE
A list to display status of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2not-accessiblemandatory
pduPwrMonitoringOutletStatusPduDEntry
OBJECT-TYPE
A list to display status of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1not-accessiblemandatory
outletPduDIndex
OBJECT-TYPE
The index to outlet status of PduD.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.1INTEGER (0..41)read-onlymandatory
outletPduDState
OBJECT-TYPE
The state of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.2INTEGER {off(1), on(2)}read-onlymandatory
outletPduDCurrent
OBJECT-TYPE
The current of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.3INTEGERread-onlymandatory
outletPduDPwrFactor
OBJECT-TYPE
The power factor of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.4INTEGERread-onlymandatory
outletPduDPower
OBJECT-TYPE
The power of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.5INTEGERread-onlymandatory
outletPduDEnergy
OBJECT-TYPE
The energy of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.6INTEGERread-onlymandatory
outletPduDResetFrom
OBJECT-TYPE
The reset date of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.7DisplayStringread-onlymandatory
outletPduDStatus
OBJECT-TYPE
The status of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.8INTEGER {normal(1), warning(2), critical(3)}read-onlymandatory
pduPwrMonitoringOutletCfgTablePduD
OBJECT-TYPE
A list to display configuration of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3not-accessiblemandatory
pduPwrMonitoringOutletCfgPduDEntry
OBJECT-TYPE
A list to display configuration of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1not-accessiblemandatory
outletCfgPduDIndex
OBJECT-TYPE
The index to outlet configuration of PduD.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.1INTEGER (0..41)read-onlymandatory
outletCfgPduDName
OBJECT-TYPE
The name for outlet of PduD.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.2DisplayStringread-writemandatory
outletCfgPduDDelayOnStatus
OBJECT-TYPE
The Delay On status of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.3INTEGER {nodelay(1), delay(2)}read-writemandatory
outletCfgPduDDelayOnTime
OBJECT-TYPE
The Delay On time of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.4INTEGERread-writemandatory
outletCfgPduDDelayOffStatus
OBJECT-TYPE
The Delay Off status of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.5INTEGER {nodelay(1), delay(2)}read-writemandatory
outletCfgPduDDelayOffTime
OBJECT-TYPE
The Delay Off time of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.6INTEGERread-writemandatory
outletCfgPduDReboot
OBJECT-TYPE
The Delay On reboot duration of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.7INTEGERread-writemandatory
outletCfgPduDOverCurrCritical
OBJECT-TYPE
The Critical Threshold of current of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.8INTEGERread-writemandatory
outletCfgPduDOverCurrWarning
OBJECT-TYPE
The Warning Threshold of current of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.9INTEGERread-writemandatory
outletCfgPduDOverPwrCritical
OBJECT-TYPE
The Critical Threshold of power of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.10INTEGERread-writemandatory
outletCfgPduDOverPwrWarning
OBJECT-TYPE
The Warning Threshold of power of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.11INTEGERread-writemandatory
pduPwrMonitoringOutletCtlTablePduD
OBJECT-TYPE
A list to display control of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.4not-accessiblemandatory
pduPwrMonitoringOutletCtlPduDEntry
OBJECT-TYPE
A list to display control of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.4.1not-accessiblemandatory
outletCtlPduDIndex
OBJECT-TYPE
The index to outlet control of PduD.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.4.1.1INTEGER (0..41)read-onlymandatory
outletCtlPduDControl
OBJECT-TYPE
The control-type of PduD outlet.
1.3.6.1.4.1.42610.1.4.4.1.6.2.4.4.1.2INTEGER {immediateOn(1), delayedOn(2), immediateOff(3), delayedOff(4), immediateCycle(5), delayedCycle(6)}read-writemandatory
pduEnvMonitoring
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.7
pduEnvMonitoringStatus
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.7.1
pduEnvMonitoringTemp
OBJECT-TYPE
The temperature of EMD.
1.3.6.1.4.1.42610.1.4.4.1.7.1.1INTEGERread-onlymandatory
pduEnvMonitoringHumi
OBJECT-TYPE
The humidity of EMD.
1.3.6.1.4.1.42610.1.4.4.1.7.1.2INTEGERread-onlymandatory
pduEnvMonitoringTempAlarm
OBJECT-TYPE
The temperature status of EMD.
1.3.6.1.4.1.42610.1.4.4.1.7.1.3INTEGER {normal(1), warning(2), critical(3)}read-onlymandatory
pduEnvMonitoringHumiAlarm
OBJECT-TYPE
The humidity status of EMD.
1.3.6.1.4.1.42610.1.4.4.1.7.1.4INTEGER {normal(1), warning(2), critical(3)}read-onlymandatory
pduEnvMonitoringCfg
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.1.7.2
pduEnvMonitoringControl
OBJECT-TYPE
Enable/disable the EMD.
1.3.6.1.4.1.42610.1.4.4.1.7.2.1INTEGER {disabled(1), enabled(2)}read-writemandatory
pduEnvMonitoringTempHighCritical
OBJECT-TYPE
The High Critical Threshold of temperature of EMD.
1.3.6.1.4.1.42610.1.4.4.1.7.2.2INTEGERread-writemandatory
pduEnvMonitoringTempHighWarning
OBJECT-TYPE
The High Warning Threshold of temperature of EMD.
1.3.6.1.4.1.42610.1.4.4.1.7.2.3INTEGERread-writemandatory
pduEnvMonitoringTempLowCritical
OBJECT-TYPE
The Low Critical Threshold of temperature of EMD.
1.3.6.1.4.1.42610.1.4.4.1.7.2.4INTEGERread-writemandatory
pduEnvMonitoringTempLowWarning
OBJECT-TYPE
The Low Warning Threshold of temperature of EMD.
1.3.6.1.4.1.42610.1.4.4.1.7.2.5INTEGERread-writemandatory
pduEnvMonitoringTempHystersis
OBJECT-TYPE
The Hystersis of Temperature of EMD.
1.3.6.1.4.1.42610.1.4.4.1.7.2.6INTEGERread-writemandatory
pduEnvMonitoringTempOffset
OBJECT-TYPE
The Offset of Temperature of EMD.
1.3.6.1.4.1.42610.1.4.4.1.7.2.7INTEGERread-writemandatory
pduEnvMonitoringHumiHighCritical
OBJECT-TYPE
The High Crtitcal Threshold of humidity of EMD.
1.3.6.1.4.1.42610.1.4.4.1.7.2.8INTEGERread-writemandatory
pduEnvMonitoringHumiHighWarning
OBJECT-TYPE
The High Warning Threshold of humidity of EMD.
1.3.6.1.4.1.42610.1.4.4.1.7.2.9INTEGERread-writemandatory
pduEnvMonitoringHumiLowCritical
OBJECT-TYPE
The Low Crtitcal Threshold of humidity of EMD.
1.3.6.1.4.1.42610.1.4.4.1.7.2.10INTEGERread-writemandatory
pduEnvMonitoringHumiLowWarning
OBJECT-TYPE
The Low Warning Threshold of humidity of EMD.
1.3.6.1.4.1.42610.1.4.4.1.7.2.11INTEGERread-writemandatory
pduEnvMonitoringHumiHystersis
OBJECT-TYPE
The Hystersis of Humidity of EMD.
1.3.6.1.4.1.42610.1.4.4.1.7.2.12INTEGERread-writemandatory
pduEnvMonitoringHumiOffset
OBJECT-TYPE
The Ofset of Humidity of EMD.
1.3.6.1.4.1.42610.1.4.4.1.7.2.13INTEGERread-writemandatory
pduTraps
OBJECT-IDENTITY
1.3.6.1.4.1.42610.1.4.4.2

Notifications

NameOIDStatus
pduSystemColdBoot
NOTIFICATION-TYPE
Informational: Cold boot.
1.3.6.1.4.1.42610.1.4.4.2.0.1
pduSystemWarmBoot
NOTIFICATION-TYPE
Informational: Warm boot.
1.3.6.1.4.1.42610.1.4.4.2.0.2
pduSystemRestart
NOTIFICATION-TYPE
Informational: System restart.
1.3.6.1.4.1.42610.1.4.4.2.0.3
pduResetToDefault
NOTIFICATION-TYPE
Informational: Parameters reset to default.
1.3.6.1.4.1.42610.1.4.4.2.0.4
pduFirmUpgrade
NOTIFICATION-TYPE
Informational: Firmware upgrade.
1.3.6.1.4.1.42610.1.4.4.2.0.5
pduSystemLogClear
NOTIFICATION-TYPE
Informational: System log cleared.
1.3.6.1.4.1.42610.1.4.4.2.0.6
pduEventlogClear
NOTIFICATION-TYPE
Informational: Event log cleared.
1.3.6.1.4.1.42610.1.4.4.2.0.7
pduInletHistoryClear
NOTIFICATION-TYPE
Informational: Inlet history log cleared.
1.3.6.1.4.1.42610.1.4.4.2.0.8
pduOutletHistoryClear
NOTIFICATION-TYPE
Informational: Outlet history log cleared.
1.3.6.1.4.1.42610.1.4.4.2.0.9
pduSystemTimeChangeUser
NOTIFICATION-TYPE
Informational: Time changed by user.
1.3.6.1.4.1.42610.1.4.4.2.0.10
pduSystemTimeChangeNtp
NOTIFICATION-TYPE
Informational: Time synced with NTP server.
1.3.6.1.4.1.42610.1.4.4.2.0.11
pduSystemTimeChangeRtc
NOTIFICATION-TYPE
Informational: Time changed by RTC.
1.3.6.1.4.1.42610.1.4.4.2.0.12
pduMailTestPass
NOTIFICATION-TYPE
Informational: Test mail pass.
1.3.6.1.4.1.42610.1.4.4.2.0.13
pduMailTestFail
NOTIFICATION-TYPE
Informational: Test mail failed.
1.3.6.1.4.1.42610.1.4.4.2.0.14
pduMailSentPass
NOTIFICATION-TYPE
Informational: Mail sent successfully.
1.3.6.1.4.1.42610.1.4.4.2.0.15
pduMailSentFail
NOTIFICATION-TYPE
Informational: Mail sent failed.
1.3.6.1.4.1.42610.1.4.4.2.0.16
pduSystemCfgChange
NOTIFICATION-TYPE
Informational: Parameter changed.
1.3.6.1.4.1.42610.1.4.4.2.0.17
pduSystemParamImport
NOTIFICATION-TYPE
Informational: Import XML configuration.
1.3.6.1.4.1.42610.1.4.4.2.0.18
pduInletCommLost
NOTIFICATION-TYPE
Informational: Inlet communication lost.
1.3.6.1.4.1.42610.1.4.4.2.0.19
pduInletCommRestore
NOTIFICATION-TYPE
Informational: Inlet communication restore.
1.3.6.1.4.1.42610.1.4.4.2.0.20
pduOutletCommLost
NOTIFICATION-TYPE
Informational: Outlet communication lost.
1.3.6.1.4.1.42610.1.4.4.2.0.21
pduOutletCommRestore
NOTIFICATION-TYPE
Informational: Outlet communication restore
1.3.6.1.4.1.42610.1.4.4.2.0.22
pduOutletOnUser
NOTIFICATION-TYPE
Informational: Outlet turned on by user.
1.3.6.1.4.1.42610.1.4.4.2.0.23
pduOutletOnSchedule
NOTIFICATION-TYPE
Informational: Outlet turned on by schedule.
1.3.6.1.4.1.42610.1.4.4.2.0.24
pduOutletOffUser
NOTIFICATION-TYPE
Informational: Outlet turned off by user.
1.3.6.1.4.1.42610.1.4.4.2.0.25
pduOutletOffSchedule
NOTIFICATION-TYPE
Informational: Outlet turned off by schedule.
1.3.6.1.4.1.42610.1.4.4.2.0.26
pduOutletRebootUser
NOTIFICATION-TYPE
Informational: Outlet reboot by user.
1.3.6.1.4.1.42610.1.4.4.2.0.27
pduOutletRebootSchedule
NOTIFICATION-TYPE
Informational: Outlet reboot by schedule.
1.3.6.1.4.1.42610.1.4.4.2.0.28
pduInletEnergyReset
NOTIFICATION-TYPE
Informational: Inlet energy reset.
1.3.6.1.4.1.42610.1.4.4.2.0.29
pduOutletEnergyReset
NOTIFICATION-TYPE
Informational: Outlet energy reset.
1.3.6.1.4.1.42610.1.4.4.2.0.30
pduSetUser
NOTIFICATION-TYPE
Informational: Assign outlet to user.
1.3.6.1.4.1.42610.1.4.4.2.0.31
pduDeletUser
NOTIFICATION-TYPE
Informational: Delete user.
1.3.6.1.4.1.42610.1.4.4.2.0.32
pduUpgradeInletSuccess
NOTIFICATION-TYPE
Informational: Inlet upgrade successfully.
1.3.6.1.4.1.42610.1.4.4.2.0.33
pduUpgradeInletFail
NOTIFICATION-TYPE
Informational: Inlet upgrade fail.
1.3.6.1.4.1.42610.1.4.4.2.0.34
pduUpgradeOutletSuccess
NOTIFICATION-TYPE
Informational: Outlet upgrade successfully.
1.3.6.1.4.1.42610.1.4.4.2.0.35
pduUpgradeOutletFail
NOTIFICATION-TYPE
Informational: Outlet upgrade fail.
1.3.6.1.4.1.42610.1.4.4.2.0.36
pduEmdTempHighWarnToNormal
NOTIFICATION-TYPE
Informational: Temperature had returned from high warning to normal.
1.3.6.1.4.1.42610.1.4.4.2.0.101
pduEmdTempHighWarn
NOTIFICATION-TYPE
Warning: Temperature was higher than high warning set point.
1.3.6.1.4.1.42610.1.4.4.2.0.102
pduEmdTempLowWarnToNormal
NOTIFICATION-TYPE
Informational: Temperature had returned from low warning to normal.
1.3.6.1.4.1.42610.1.4.4.2.0.103
pduEmdTempLowWarn
NOTIFICATION-TYPE
Warning: Temperature was lower than low warning set point.
1.3.6.1.4.1.42610.1.4.4.2.0.104
pduEmdTempHighCritToWarn
NOTIFICATION-TYPE
Informational: Temperature had returned from high critical to high warning.
1.3.6.1.4.1.42610.1.4.4.2.0.105
pduEmdTempHighCritical
NOTIFICATION-TYPE
Critical: Temperature was higher than high critical set point.
1.3.6.1.4.1.42610.1.4.4.2.0.106
pduEmdTempLowCritToWarn
NOTIFICATION-TYPE
Informational: Temperature had returned from low critical to low warning.
1.3.6.1.4.1.42610.1.4.4.2.0.107
pduEmdTempLowCritical
NOTIFICATION-TYPE
Critical: Temperature was lower than low critical set point.
1.3.6.1.4.1.42610.1.4.4.2.0.108
pduEmdHumiHighWarnToNormal
NOTIFICATION-TYPE
Informational: Humidity had returned from high warning to normal.
1.3.6.1.4.1.42610.1.4.4.2.0.109
pduEmdHumiHighWarn
NOTIFICATION-TYPE
Warning: Humidity was higher than high warning set point.
1.3.6.1.4.1.42610.1.4.4.2.0.110
pduEmdHumiLowWarnToNormal
NOTIFICATION-TYPE
Informational: Humidity had returned from low warning to normal.
1.3.6.1.4.1.42610.1.4.4.2.0.111
pduEmdHumiLowWarn
NOTIFICATION-TYPE
Warning: Humidity was lower than low warning set point.
1.3.6.1.4.1.42610.1.4.4.2.0.112
pduEmdHumiHighCritToWarn
NOTIFICATION-TYPE
Informational: Humidity had returned from high critical to high warning.
1.3.6.1.4.1.42610.1.4.4.2.0.113
pduEmdHumiHighCritical
NOTIFICATION-TYPE
Critical: Humidity was higher than high critical set point.
1.3.6.1.4.1.42610.1.4.4.2.0.114
pduEmdHumiLowCritToWarn
NOTIFICATION-TYPE
Informational: Humidity had returned from low critical to low warning.
1.3.6.1.4.1.42610.1.4.4.2.0.115
pduEmdHumiLowCritical
NOTIFICATION-TYPE
Critical: Humidity was lower than low critical set point.
1.3.6.1.4.1.42610.1.4.4.2.0.116
pduEmdAlarm1NotActive
NOTIFICATION-TYPE
Informational: Alarm-1 became inactive.
1.3.6.1.4.1.42610.1.4.4.2.0.117
pduEmdAlarm1Active
NOTIFICATION-TYPE
Warning: Alarm-1 became active.
1.3.6.1.4.1.42610.1.4.4.2.0.118
pduEmdAlarm2NotActive
NOTIFICATION-TYPE
Informational: Alarm-2 became inactive.
1.3.6.1.4.1.42610.1.4.4.2.0.119
pduEmdAlarm2Active
NOTIFICATION-TYPE
Warning: Alarm-2 became active.
1.3.6.1.4.1.42610.1.4.4.2.0.120
pduRs485Online
NOTIFICATION-TYPE
Informational: RS485 Sensor was online.
1.3.6.1.4.1.42610.1.4.4.2.0.121
pduRs485Offline
NOTIFICATION-TYPE
Warning: RS485 Sensor was offline.
1.3.6.1.4.1.42610.1.4.4.2.0.122
pduInletLoadCritToWarn
NOTIFICATION-TYPE
Informational: Inlet load had returned from critical to warning.
1.3.6.1.4.1.42610.1.4.4.2.0.123
pduInletLoadCritical
NOTIFICATION-TYPE
Critical: Inlet load was higher than critical set point.
1.3.6.1.4.1.42610.1.4.4.2.0.124
pduInletLoadWarnToNormal
NOTIFICATION-TYPE
Informational: Inlet load had returned from warning to normal.
1.3.6.1.4.1.42610.1.4.4.2.0.125
pduInletLoadWarn
NOTIFICATION-TYPE
Warning: Inlet load was higher than warning set point.
1.3.6.1.4.1.42610.1.4.4.2.0.126
pduInletCurrPhase1CritToWarn
NOTIFICATION-TYPE
Informational: Inlet phase1 current had returned from critical to warning.
1.3.6.1.4.1.42610.1.4.4.2.0.127
pduInletCurrPhase1Critical
NOTIFICATION-TYPE
Critical: Inlet phase1 current was higher than critical set point.
1.3.6.1.4.1.42610.1.4.4.2.0.128
pduInletCurrPhase1WarnToNormal
NOTIFICATION-TYPE
Informational: Inlet phase1 current had returned from warning to normal.
1.3.6.1.4.1.42610.1.4.4.2.0.129
pduInletCurrPhase1Warn
NOTIFICATION-TYPE
Warning: Inlet phase1 current was higher than warning set point.
1.3.6.1.4.1.42610.1.4.4.2.0.130
pduInletCurrPhase2CritToWarn
NOTIFICATION-TYPE
Informational: Inlet phase2 current had returned from critical to warning.
1.3.6.1.4.1.42610.1.4.4.2.0.131
pduInletCurrPhase2Critical
NOTIFICATION-TYPE
Critical: Inlet phase2 current was higher than critical set point.
1.3.6.1.4.1.42610.1.4.4.2.0.132
pduInletCurrPhase2WarnToNormal
NOTIFICATION-TYPE
Informational: Inlet phase2 current had returned from warning to normal.
1.3.6.1.4.1.42610.1.4.4.2.0.133
pduInletCurrPhase2Warn
NOTIFICATION-TYPE
Warning: Inlet phase2 current was higher than warning set point.
1.3.6.1.4.1.42610.1.4.4.2.0.134
pduInletCurrPhase3CritToWarn
NOTIFICATION-TYPE
Informational: Inlet phase3 current had returned from critical to warning.
1.3.6.1.4.1.42610.1.4.4.2.0.135
pduInletCurrPhase3Critical
NOTIFICATION-TYPE
Critical: Inlet phase3 current was higher than critical set point.
1.3.6.1.4.1.42610.1.4.4.2.0.136
pduInletCurrPhase3WarnToNormal
NOTIFICATION-TYPE
Informational: Inlet phase3 current had returned from warning to normal.
1.3.6.1.4.1.42610.1.4.4.2.0.137
pduInletCurrPhase3Warn
NOTIFICATION-TYPE
Warning: Inlet phase3 current had returned from critical to warning.
1.3.6.1.4.1.42610.1.4.4.2.0.138
pduInletVoltPhase1CritToWarn
NOTIFICATION-TYPE
Informational: Inlet phase1 voltage had returned from critical to warning.
1.3.6.1.4.1.42610.1.4.4.2.0.139
pduInletVoltPhase1Critical
NOTIFICATION-TYPE
Critical: Inlet phase1 voltage was higher than critical set point.
1.3.6.1.4.1.42610.1.4.4.2.0.140
pduInletVoltPhase1WarnToNormal
NOTIFICATION-TYPE
Informational: Inlet phase1 voltage had returned from warning to normal.
1.3.6.1.4.1.42610.1.4.4.2.0.141
pduInletVoltPhase1Warn
NOTIFICATION-TYPE
Warning: Inlet phase1 voltage was higher than warning set point.
1.3.6.1.4.1.42610.1.4.4.2.0.142
pduInletVoltPhase2CritToWarn
NOTIFICATION-TYPE
Informational: Inlet phase2 voltage had returned from critical to warning.
1.3.6.1.4.1.42610.1.4.4.2.0.143
pduInletVoltPhase2Critical
NOTIFICATION-TYPE
Critical: Inlet phase2 voltage was higher than critical set point.
1.3.6.1.4.1.42610.1.4.4.2.0.144
pduInletVoltPhase2WarnToNormal
NOTIFICATION-TYPE
Informational: Inlet phase2 voltage had returned from warning to normal.
1.3.6.1.4.1.42610.1.4.4.2.0.145
pduInletVoltPhase2Warn
NOTIFICATION-TYPE
Warning: Inlet phase2 voltage was higher than warning set point.
1.3.6.1.4.1.42610.1.4.4.2.0.146
pduInletVoltPhase3CritToWarn
NOTIFICATION-TYPE
Informational: Inlet phase3 voltage had returned from critical to warning.
1.3.6.1.4.1.42610.1.4.4.2.0.147
pduInletVoltPhase3Critical
NOTIFICATION-TYPE
Critical: Inlet phase3 voltage was higher than critical set point.
1.3.6.1.4.1.42610.1.4.4.2.0.148
pduInletVoltPhase3WarnToNormal
NOTIFICATION-TYPE
Informational: Inlet phase3 voltage had returned from warning to normal.
1.3.6.1.4.1.42610.1.4.4.2.0.149
pduInletVoltPhase3Warn
NOTIFICATION-TYPE
Warning: Inlet phase3 voltage was higher than warning set point.
1.3.6.1.4.1.42610.1.4.4.2.0.150
pduOutletCurrCritToWarn
NOTIFICATION-TYPE
Informational: Outlet current had returned from critical to warning.
1.3.6.1.4.1.42610.1.4.4.2.0.151
pduOutletCurrCritical
NOTIFICATION-TYPE
Critical: Outlet current was higher than critical set point.
1.3.6.1.4.1.42610.1.4.4.2.0.152
pduOutletCurrWarnToNormal
NOTIFICATION-TYPE
Informational: Outlet current had returned from warning to normal.
1.3.6.1.4.1.42610.1.4.4.2.0.153
pduOutletCurrWarn
NOTIFICATION-TYPE
Warning: Outlet current was higher than warning set point.
1.3.6.1.4.1.42610.1.4.4.2.0.154
pduOutletPwrCritTOWarn
NOTIFICATION-TYPE
Informational: Outlet power had returned from critical to warning.
1.3.6.1.4.1.42610.1.4.4.2.0.155
pduOutletPwrCritical
NOTIFICATION-TYPE
Critical: Outlet power was higher than critical set point.
1.3.6.1.4.1.42610.1.4.4.2.0.156
pduOutletPwrWarnToNormal
NOTIFICATION-TYPE
Informational: Outlet power had returned from warning to normal.
1.3.6.1.4.1.42610.1.4.4.2.0.157
pduOutletPwrWarn
NOTIFICATION-TYPE
Warning: Outlet power was higher than warning set point.
1.3.6.1.4.1.42610.1.4.4.2.0.158
pduAlarm1Disabled
NOTIFICATION-TYPE
Informational: Alarm-1 became disabled.
1.3.6.1.4.1.42610.1.4.4.2.0.159
pduAlarm2Disabled
NOTIFICATION-TYPE
Informational: Alarm-2 became disabled.
1.3.6.1.4.1.42610.1.4.4.2.0.160