SPAGENT-MIB
- Registered at
- 1.3.6.1.4.1.3854.1.1.101.3.6.1.4.1.3854.1.2.2.1.191.3.6.1.4.1.3854.1.2.2.1.1171.3.6.1.4.1.3854.1.2.2.1.1181.3.6.1.4.1.3854.1.2.2.1.1251.3.6.1.4.1.3854.21.3.6.1.4.1.3854.3
- Namespace
- akcp
- Source file
SPAGENT-MIB- Digest
sha256:3702cd07530ca3d718ba3fa993b1bc1174ed4ceedd08e17c815b5832fa7827b2
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Opaque, TRAP-TYPE, enterprises, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
SNMPv2-CONF SNMPv2-SMI SNMPv2-TC SPAGENT-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| akcp OBJECT-IDENTITY | 1.3.6.1.4.1.3854 | |||
| sensorProbe OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1 | |||
| spSummary OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.1 | |||
| spStatus OBJECT-TYPE The current status of this sensorProbe. The status of the sensorProbe is the worst status of all the sensors under the control of this sensorProbe. | 1.3.6.1.4.1.3854.1.1.2 | INTEGER {noStatus(1), normal(2), warning(3), critical(4), sensorError(5)} | read-only | mandatory |
| spManufName OBJECT-TYPE The manufacturers name | 1.3.6.1.4.1.3854.1.1.6 | DisplayString | read-only | mandatory |
| spHelpUrl OBJECT-TYPE The URL of the web based help | 1.3.6.1.4.1.3854.1.1.7 | DisplayString | read-only | mandatory |
| spProductName OBJECT-TYPE The product name | 1.3.6.1.4.1.3854.1.1.8 | DisplayString | read-only | mandatory |
| spHostName OBJECT-TYPE The hostname | 1.3.6.1.4.1.3854.1.1.9 | DisplayString | read-only | mandatory |
| spStatusEachModule OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.1.10 | |||
| spStatusRJ45 OBJECT-TYPE The status of the sensorProbe is the worst status of all sensors on RJ45 port | 1.3.6.1.4.1.3854.1.1.10.1 | INTEGER {noStatus(1), normal(2), warning(3), critical(4), sensorError(5)} | read-only | mandatory |
| spStatusNoVideoSignal OBJECT-TYPE The status of the sensorProbe is the worst status of all No Video Signal sensors | 1.3.6.1.4.1.3854.1.1.10.2 | INTEGER {noStatus(1), normal(2), warning(3), critical(4), sensorError(5)} | read-only | mandatory |
| spStatusSoundDetector OBJECT-TYPE The status of the sensorProbe is the worst status of Sound Detector sensors | 1.3.6.1.4.1.3854.1.1.10.3 | INTEGER {noStatus(1), normal(2), warning(3), critical(4), sensorError(5)} | read-only | mandatory |
| spStatusVirtual OBJECT-TYPE The status of the sensorProbe is the worst status of all Virtual sensors | 1.3.6.1.4.1.3854.1.1.10.4 | INTEGER {noStatus(1), normal(2), warning(3), critical(4), sensorError(5)} | read-only | mandatory |
| spStatusSoftMotion OBJECT-TYPE The status of the sensorProbe is the worst status of all Camera Motion Detector sensors | 1.3.6.1.4.1.3854.1.1.10.5 | INTEGER {noStatus(1), normal(2), warning(3), critical(4), sensorError(5)} | read-only | mandatory |
| spSensor OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2 | |||
| sensorProbeDetail OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2 | |||
| sensorProbeEntry OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1 | |||
| sensorProbeHost OBJECT-TYPE The Host of this sensor, this is the IP address | 1.3.6.1.4.1.3854.1.2.2.1.1 | IpAddress | read-write | mandatory |
| sensorProbeUseDHCP OBJECT-TYPE To use DHCP enter a 1, to use a static IP address enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.2 | INTEGER {yes(1), no(2)} | read-write | mandatory |
| sensorProbeMAC OBJECT-TYPE The MAC address of this system | 1.3.6.1.4.1.3854.1.2.2.1.3 | DisplayString | read-only | mandatory |
| sensorProbeSetCommunity OBJECT-TYPE The sensorProbe community string used for snmp Sets | 1.3.6.1.4.1.3854.1.2.2.1.4 | DisplayString | read-write | mandatory |
| sensorProbeGetCommunity OBJECT-TYPE The sensorProbe community string used for snmp Gets | 1.3.6.1.4.1.3854.1.2.2.1.5 | DisplayString | read-write | mandatory |
| sensorProbeTempTable OBJECT-TYPE This table contains the data for every Temperature Sensor in the SensorArray. Each row in the table contains data for a different Temperature Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.16 | not-accessible | mandatory | |
| sensorProbeTempEntry OBJECT-TYPE This is an entry in the sensorProbeTempEntry Table | 1.3.6.1.4.1.3854.1.2.2.1.16.1 | not-accessible | mandatory | |
| sensorProbeTempDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.1.2.2.1.16.1.1 | DisplayString | read-write | mandatory |
| sensorProbeTempLocation OBJECT-TYPE The physical location of this sensor | 1.3.6.1.4.1.3854.1.2.2.1.16.1.2 | DisplayString | read-write | mandatory |
| sensorProbeTempDegree OBJECT-TYPE The degrees in this sensor | 1.3.6.1.4.1.3854.1.2.2.1.16.1.3 | INTEGER | read-only | mandatory |
| sensorProbeTempStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.16.1.4 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorProbeTempOnline OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.16.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeTempGoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.16.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeTempHighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.16.1.7 | INTEGER | read-write | mandatory |
| sensorProbeTempHighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.1.2.2.1.16.1.8 | INTEGER | read-write | mandatory |
| sensorProbeTempLowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.16.1.9 | INTEGER | read-write | mandatory |
| sensorProbeTempLowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.1.2.2.1.16.1.10 | INTEGER | read-write | mandatory |
| sensorProbeTempRearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.1.2.2.1.16.1.11 | INTEGER | read-write | mandatory |
| sensorProbeTempDegreeType OBJECT-TYPE The degrees are in fahrenheit(0) or in celsius(1) | 1.3.6.1.4.1.3854.1.2.2.1.16.1.12 | INTEGER {fahr(0), celsius(1)} | read-write | mandatory |
| sensorProbeTempSensorType OBJECT-TYPE The type of temperture sensor | 1.3.6.1.4.1.3854.1.2.2.1.16.1.13 | INTEGER {type1(0), type2(1)} | read-write | mandatory |
| sensorProbeTempDegreeRaw OBJECT-TYPE SP Only: The raw degree data from the temperature sensor, slightly higher resolution | 1.3.6.1.4.1.3854.1.2.2.1.16.1.14 | INTEGER | read-only | mandatory |
| sensorProbeTempEmailTrapLimit OBJECT-TYPE Enable email/trap limit feature | 1.3.6.1.4.1.3854.1.2.2.1.16.1.16 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeTempEmailTrapSchedule OBJECT-TYPE SP Only: Email/trap limit schedule for this sensor | 1.3.6.1.4.1.3854.1.2.2.1.16.1.17 | DisplayString | read-write | mandatory |
| sensorProbeTempEmailTrapInterval OBJECT-TYPE Minimum time between each [email/trap:SP, only trap:CP8] (can be from 0 to 60 minutes). | 1.3.6.1.4.1.3854.1.2.2.1.16.1.18 | INTEGER (0..60) | read-write | mandatory |
| sensorProbeTempSendNormalTrap OBJECT-TYPE Enable sending email/trap when sensor goes to normal | 1.3.6.1.4.1.3854.1.2.2.1.16.1.19 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeTempDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.1.2.2.1.16.1.20 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeTempDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.1.2.2.1.16.1.21 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeTempIndex OBJECT-TYPE The index into the temperature sensor table | 1.3.6.1.4.1.3854.1.2.2.1.16.1.22 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeTempRelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.23 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeTempRelayOnPort OBJECT-TYPE The sensor port that the relay will listen to. If this is set to 255, then the relay will not listen to any sensor ports | 1.3.6.1.4.1.3854.1.2.2.1.16.1.24 | INTEGER (0..255) | read-write | mandatory |
| sensorProbeTempRelayActiveStatus OBJECT-TYPE Sensor status that will activate the relay | 1.3.6.1.4.1.3854.1.2.2.1.16.1.25 | INTEGER {highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), anyError(7)} | read-write | mandatory |
| sensorProbeTempRelayAction OBJECT-TYPE What the relay will do when the listened to port status turns to the specified active status. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.26 | INTEGER {cycle(2), turn-on(3), turn-off(4)} | read-write | mandatory |
| sensorProbeTempEmailInterval OBJECT-TYPE CP8 Only: Minimum time between each email (can be from 0 to 60 minutes) | 1.3.6.1.4.1.3854.1.2.2.1.16.1.27 | INTEGER (0..60) | read-write | mandatory |
| sensorProbeTempIndexCount OBJECT-TYPE Number of Temperature sensor online | 1.3.6.1.4.1.3854.1.2.2.1.16.1.28 | INTEGER | read-only | mandatory |
| sensorProbeTempOffset OBJECT-TYPE Temperature Offset reading | 1.3.6.1.4.1.3854.1.2.2.1.16.1.29 | INTEGER | read-write | mandatory |
| sensorProbeTempSirenCycleTime OBJECT-TYPE Siren toggle period in seconds for Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.30 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeTempSirenOnPort OBJECT-TYPE The sensor port that the siren will listen to. If this is set to 255, then the siren will not listen to any sensor ports | 1.3.6.1.4.1.3854.1.2.2.1.16.1.31 | INTEGER (0..255) | read-write | mandatory |
| sensorProbeTempSirenActiveStatus OBJECT-TYPE Sensor status that will activate the siren | 1.3.6.1.4.1.3854.1.2.2.1.16.1.32 | INTEGER {highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), anyError(7)} | read-write | mandatory |
| sensorProbeTempSirenAction OBJECT-TYPE What the siren will do when the listened to port status turns to the specified active status. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.33 | INTEGER {cycle(2), turn-on(3), turn-off(4)} | read-write | mandatory |
| sensorProbeTempAcknowledgement OBJECT-TYPE Acknowledged sensor error and stop notification | 1.3.6.1.4.1.3854.1.2.2.1.16.1.34 | INTEGER {ack(1)} | read-write | mandatory |
| sensorProbeTempSirenDelayAlarm OBJECT-TYPE Siren delay in seconds before start Alarm. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.35 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeTempURL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.36 | DisplayString | read-write | mandatory |
| sensorProbeTempOpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.37 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeTempDatacollectType OBJECT-TYPE Type of datacollect to collect. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.38 | INTEGER {average(1), highest(2), lowest(3)} | read-write | mandatory |
| sensorProbeTempContTimeHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.39 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTempContTimeHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.40 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTempContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.41 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTempContTimeLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.42 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTempContTimeLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.43 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTempContTimeSensorError OBJECT-TYPE Continuous time for this sensor to be in Sensor Error before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.44 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTempCalendar OBJECT-TYPE Enable or disable the calendar filtering working hours of sensor. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.45 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeThermostatIndex OBJECT-TYPE A unique value for each sensor thermostat port. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.46 | INTEGER | read-only | mandatory |
| sensorProbeThermostatDescription OBJECT-TYPE A Description of this sensor thermostat | 1.3.6.1.4.1.3854.1.2.2.1.16.1.47 | DisplayString | read-write | mandatory |
| sensorProbeThermostatValue OBJECT-TYPE The value in this sensor | 1.3.6.1.4.1.3854.1.2.2.1.16.1.48 | INTEGER | read-only | mandatory |
| sensorProbeThermostatOnline OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.16.1.49 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeThermostatGoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.16.1.50 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeThermostatMode OBJECT-TYPE To select the thermostat mode for working on time-bases(1) or normal(0). | 1.3.6.1.4.1.3854.1.2.2.1.16.1.51 | INTEGER {normal(0), time-bases(1)} | read-write | mandatory |
| sensorProbeThermostatRelayControlPort OBJECT-TYPE To select a relay port to be controled by this thermostat sensor. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.52 | INTEGER | read-write | mandatory |
| sensorProbeThermostatNormalAction1 OBJECT-TYPE Profile1: Thermostat normal action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.53 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatHighLimit1 OBJECT-TYPE Profile1: When this sersor higher than thermostat high limit, it will take a high limit action. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.54 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatHighLimitAction1 OBJECT-TYPE Profile1: Thermostat high limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.55 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatLowLimit1 OBJECT-TYPE Profile1: When this sersor higher than thermostat low limit, it will take a normal limit action. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.56 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatLowLimitAction1 OBJECT-TYPE Profile1: Thermostat low limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.57 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatNormalAction2 OBJECT-TYPE Profile2: Thermostat normal action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.58 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatHighLimit2 OBJECT-TYPE Profile2: When this sersor higher than thermostat high limit, it will take a high limit action. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.59 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatHighLimitAction2 OBJECT-TYPE Profile2: Thermostat high limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.60 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatLowLimit2 OBJECT-TYPE Profile2: When this sersor higher than thermostat low limit, it will take a normal limit action. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.61 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatLowLimitAction2 OBJECT-TYPE Profile2: Thermostat low limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.16.1.62 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatEnableTime OBJECT-TYPE Time to enable on Thermostat | 1.3.6.1.4.1.3854.1.2.2.1.16.1.63 | DisplayString | read-write | mandatory |
| sensorProbeTempSendNormalMail OBJECT-TYPE Enable sending email when sensor goes to normal | 1.3.6.1.4.1.3854.1.2.2.1.16.1.64 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeTempSendTrap OBJECT-TYPE Enable sending trap when sensor change status | 1.3.6.1.4.1.3854.1.2.2.1.16.1.65 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeTempSendMail OBJECT-TYPE Enable sending email when sensor change status | 1.3.6.1.4.1.3854.1.2.2.1.16.1.66 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeHumidityTable OBJECT-TYPE This table contains the data for every Humidity Sensor in the SensorArray. Each row in the table contains data for a different Humidity Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.17 | not-accessible | mandatory | |
| sensorProbeHumidityEntry OBJECT-TYPE This is an entry in the sensorProbeHumidityEntry Table | 1.3.6.1.4.1.3854.1.2.2.1.17.1 | not-accessible | mandatory | |
| sensorProbeHumidityDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.1.2.2.1.17.1.1 | DisplayString | read-write | mandatory |
| sensorProbeHumidityLocation OBJECT-TYPE The physical location of this sensor | 1.3.6.1.4.1.3854.1.2.2.1.17.1.2 | DisplayString | read-write | mandatory |
| sensorProbeHumidityPercent OBJECT-TYPE The relative humidity percentage measured by this sensor | 1.3.6.1.4.1.3854.1.2.2.1.17.1.3 | INTEGER (-32768..32767) | read-only | mandatory |
| sensorProbeHumidityStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.17.1.4 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorProbeHumidityOnline OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.17.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeHumidityGoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.17.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeHumidityHighWarning OBJECT-TYPE How high the relative humidity this sensor measures before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.17.1.7 | INTEGER | read-write | mandatory |
| sensorProbeHumidityHighCritical OBJECT-TYPE How high the relative humidity this sensor measures before it becomes critical | 1.3.6.1.4.1.3854.1.2.2.1.17.1.8 | INTEGER | read-write | mandatory |
| sensorProbeHumidityLowWarning OBJECT-TYPE How low the relative humidity this sensor measures before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.17.1.9 | INTEGER | read-write | mandatory |
| sensorProbeHumidityLowCritical OBJECT-TYPE How low the relative humidity this sensor measures before it becomes critical | 1.3.6.1.4.1.3854.1.2.2.1.17.1.10 | INTEGER | read-write | mandatory |
| sensorProbeHumidityRearm OBJECT-TYPE The percent relative humidity to rearm the status. For example if status goes from normal to warning, the humidity must go down spAnalogueRearm below warning before the status goes to normal | 1.3.6.1.4.1.3854.1.2.2.1.17.1.11 | INTEGER | read-write | mandatory |
| sensorProbeHumidityRaw OBJECT-TYPE The unformatted, raw, A/D value in this sensor. Contains more resolution than the formated percentage. This number can go from 0 to 1023 depending on the input voltage | 1.3.6.1.4.1.3854.1.2.2.1.17.1.13 | INTEGER | read-only | mandatory |
| sensorProbeHumidityLowVoltage OBJECT-TYPE SP Only: The low voltage range for use in AtoD conversion. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.14 | INTEGER | read-write | mandatory |
| sensorProbeHumidityHighVoltage OBJECT-TYPE SP Only: The high voltage range for use in AtoD conversion. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.15 | INTEGER | read-write | mandatory |
| sensorProbeHumidityEmailTrapLimit OBJECT-TYPE Enable email/trap limit feature | 1.3.6.1.4.1.3854.1.2.2.1.17.1.17 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeHumidityEmailTrapSchedule OBJECT-TYPE SP Only: Email/trap limit schedule for this sensor | 1.3.6.1.4.1.3854.1.2.2.1.17.1.18 | DisplayString | read-write | mandatory |
| sensorProbeHumidityEmailTrapInterval OBJECT-TYPE Minimum time between each [email/trap:SP, only trap:CP8] (can be from 0 to 60 minutes) | 1.3.6.1.4.1.3854.1.2.2.1.17.1.19 | INTEGER (0..60) | read-write | mandatory |
| sensorProbeHumiditySendNormalTrap OBJECT-TYPE Enable sending email/trap when sensor goes to normal | 1.3.6.1.4.1.3854.1.2.2.1.17.1.20 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeHumidityDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.1.2.2.1.17.1.21 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeHumidityDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.1.2.2.1.17.1.22 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeHumidityIndex OBJECT-TYPE The index into the Humidity sensor table | 1.3.6.1.4.1.3854.1.2.2.1.17.1.23 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeHumidityAtoDAmountMaxVoltage OBJECT-TYPE The maximum scale of DC voltage conversion. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.24 | INTEGER | read-write | mandatory |
| sensorProbeHumidityAtoDAmountBaseVoltage OBJECT-TYPE The base scale of DC voltage conversion. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.25 | INTEGER | read-write | mandatory |
| sensorProbeHumidityAtoDTypeUnit OBJECT-TYPE Type of scale for use in DC voltage conversion. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.26 | INTEGER {absolute(1), percent(2)} | read-write | mandatory |
| sensorProbeHumidityDcUnit OBJECT-TYPE Display unit in DC voltage conversion. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.27 | DisplayString | read-write | mandatory |
| sensorProbeHumidityAtoDJumper OBJECT-TYPE Selected voltage scale (jumper 0) in DC voltage conversion. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.28 | INTEGER {jumperAt-60(-600), jumperAt-40(-400), jumperAt-30(-300), jumperAt-20(-200), jumperAt-10(-100), jumperAt10(100), jumperAt20(200), jumperAt30(300), jumperAt40(400), jumperAt60(600)} | read-write | mandatory |
| sensorProbeHumidityRelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.29 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeHumidityRelayOnPort OBJECT-TYPE The sensor port that the relay will listen to. If this is set to 255, then the relay will not listen to any sensor ports | 1.3.6.1.4.1.3854.1.2.2.1.17.1.30 | INTEGER (0..255) | read-write | mandatory |
| sensorProbeHumidityRelayActiveStatus OBJECT-TYPE Sensor status that will activate the relay | 1.3.6.1.4.1.3854.1.2.2.1.17.1.31 | INTEGER {highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), anyError(7)} | read-write | mandatory |
| sensorProbeHumidityRelayAction OBJECT-TYPE What the relay will do when the listened to port status turns to the specified active status. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.32 | INTEGER {cycle(2), turn-on(3), turn-off(4)} | read-write | mandatory |
| sensorProbeHumidityEmailInterval OBJECT-TYPE CP8 Only: Minimum time between each emial (can be from 0 to 60 minutes) | 1.3.6.1.4.1.3854.1.2.2.1.17.1.33 | INTEGER (0..60) | read-write | mandatory |
| sensorProbeHumidity4to20mAUnit OBJECT-TYPE Display unit in DC voltage conversion. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.34 | DisplayString | read-write | mandatory |
| sensorProbeHumidityIndexCount OBJECT-TYPE Number of Humidity sensor online | 1.3.6.1.4.1.3854.1.2.2.1.17.1.35 | INTEGER | read-only | mandatory |
| sensorProbeHumidityOffset OBJECT-TYPE Humidity Offset reading | 1.3.6.1.4.1.3854.1.2.2.1.17.1.36 | INTEGER | read-write | mandatory |
| sensorProbeHumiditySirenCycleTime OBJECT-TYPE Siren toggle period in seconds for Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.37 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeHumiditySirenOnPort OBJECT-TYPE The sensor port that the siren will listen to. If this is set to 255, then the siren will not listen to any sensor ports | 1.3.6.1.4.1.3854.1.2.2.1.17.1.38 | INTEGER (0..255) | read-write | mandatory |
| sensorProbeHumiditySirenActiveStatus OBJECT-TYPE Sensor status that will activate the siren | 1.3.6.1.4.1.3854.1.2.2.1.17.1.39 | INTEGER {highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), anyError(7)} | read-write | mandatory |
| sensorProbeHumiditySirenAction OBJECT-TYPE What the siren will do when the listened to port status turns to the specified active status. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.40 | INTEGER {cycle(2), turn-on(3), turn-off(4)} | read-write | mandatory |
| sensorProbeHumidityAcknowledgement OBJECT-TYPE Acknowledged sensor error and stop notification | 1.3.6.1.4.1.3854.1.2.2.1.17.1.41 | INTEGER {ack(1)} | read-write | mandatory |
| sensorProbeHumiditySirenDelayAlarm OBJECT-TYPE Siren delay in seconds before start Alarm. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.42 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeHumidityURL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.43 | DisplayString | read-write | mandatory |
| sensorProbeHumidityOpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.44 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeHumidityDatacollectType OBJECT-TYPE Type of datacollect to collect. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.45 | INTEGER {average(1), highest(2), lowest(3)} | read-write | mandatory |
| sensorProbeHumidityContTimeHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.46 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeHumidityContTimeHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.47 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeHumidityContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.48 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeHumidityContTimeLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.49 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeHumidityContTimeLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.50 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeHumidityContTimeSensorError OBJECT-TYPE Continuous time for this sensor to be in Sensor Error before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.51 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeHumidityCalendar OBJECT-TYPE Enable or disable the calendar filtering working hours of sensor. | 1.3.6.1.4.1.3854.1.2.2.1.17.1.52 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeHumiditySendNormalMail OBJECT-TYPE Enable sending email when sensor goes to normal | 1.3.6.1.4.1.3854.1.2.2.1.17.1.53 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeHumiditySendTrap OBJECT-TYPE Enable sending trap when sensor change status | 1.3.6.1.4.1.3854.1.2.2.1.17.1.54 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeHumiditySendMail OBJECT-TYPE Enable sending email when sensor change status | 1.3.6.1.4.1.3854.1.2.2.1.17.1.55 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeIDCVVoltateRatio OBJECT-TYPE iDCV calibrate voltate ratio | 1.3.6.1.4.1.3854.1.2.2.1.17.1.56 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeIDCVErrorFlag OBJECT-TYPE iDCV error flag | 1.3.6.1.4.1.3854.1.2.2.1.17.1.57 | INTEGER (0..65535) | read-only | mandatory |
| sensorProbeIDCVCalibrate OBJECT-TYPE iDCV calibrate | 1.3.6.1.4.1.3854.1.2.2.1.17.1.58 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeAirFlowProtocolType OBJECT-TYPE Air flow protocol type | 1.3.6.1.4.1.3854.1.2.2.1.17.1.59 | INTEGER {analogType(0), i2cType(1)} | read-only | mandatory |
| sensorProbeAirFlowSensitivity OBJECT-TYPE Air flow (AFS00) sensitivity | 1.3.6.1.4.1.3854.1.2.2.1.17.1.60 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeAirFlowNormalState OBJECT-TYPE Air flow (AFS00) normal state | 1.3.6.1.4.1.3854.1.2.2.1.17.1.61 | INTEGER {presense(0), absense(1)} | read-write | mandatory |
| sensorProbeAirFlowCalibrate OBJECT-TYPE Air flow (AFS00) normal state | 1.3.6.1.4.1.3854.1.2.2.1.17.1.62 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeSwitchTable OBJECT-TYPE This table contains the data for every Switch Sensor in the SensorArray. Each row in the table contains data for a different Switch Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.18 | not-accessible | mandatory | |
| sensorProbeSwitchEntry OBJECT-TYPE This is an entry in the sensorProbeSwitchEntry Table | 1.3.6.1.4.1.3854.1.2.2.1.18.1 | not-accessible | mandatory | |
| sensorProbeSwitchDescription OBJECT-TYPE A Description of this sensor Switch | 1.3.6.1.4.1.3854.1.2.2.1.18.1.1 | DisplayString | read-write | mandatory |
| sensorProbeSwitchLocation OBJECT-TYPE The physical location of this sensor Switch | 1.3.6.1.4.1.3854.1.2.2.1.18.1.2 | DisplayString | read-write | mandatory |
| sensorProbeSwitchStatus OBJECT-TYPE The current status of this Sensor, only input switches have a status | 1.3.6.1.4.1.3854.1.2.2.1.18.1.3 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorProbeSwitchOnline OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.18.1.4 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeSwitchGoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.18.1.5 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeSwitchDirection OBJECT-TYPE To set a switch to input enter 0. To set a switch to output enter 1 | 1.3.6.1.4.1.3854.1.2.2.1.18.1.6 | INTEGER {input(0), output(1)} | read-write | mandatory |
| sensorProbeSwitchNormalState OBJECT-TYPE The normal state of an input switch. If an input switch is in this state it is normal, else it is critical. An open switch senses +5 volts. A closed switch senses 0 volts. | 1.3.6.1.4.1.3854.1.2.2.1.18.1.7 | INTEGER {closed(0), open(1)} | read-write | mandatory |
| sensorProbeSwitchOutputLevel OBJECT-TYPE An output swith can be set to this level | 1.3.6.1.4.1.3854.1.2.2.1.18.1.8 | INTEGER {low(0), high(1)} | read-write | mandatory |
| sensorProbeSensorType OBJECT-TYPE Enter the type of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.18.1.9 | INTEGER {temperature(1), fourTo20mA(2), humidity(3), water(4), atod(5), security(6), airflow(8), siren(9), dryContact(10), voltage(12), relay(13), motion(14)} | read-write | mandatory |
| sensorProbeSwitchEmailTrapLimit OBJECT-TYPE Enable email/trap limit feature | 1.3.6.1.4.1.3854.1.2.2.1.18.1.11 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeSwitchEmailTrapSchedule OBJECT-TYPE SP Only: Email/trap limit schedule for this sensor | 1.3.6.1.4.1.3854.1.2.2.1.18.1.12 | DisplayString | read-write | mandatory |
| sensorProbeSwitchEmailTrapInterval OBJECT-TYPE Minimum time between each [email/trap:SP, only trap:CP8] (can be from 0 to 60 minutes) | 1.3.6.1.4.1.3854.1.2.2.1.18.1.13 | INTEGER (0..60) | read-write | mandatory |
| sensorProbeSwitchSendNormalTrap OBJECT-TYPE Enable sending email/trap when sensor goes to normal | 1.3.6.1.4.1.3854.1.2.2.1.18.1.14 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeSwitchDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.1.2.2.1.18.1.15 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeSwitchDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.1.2.2.1.18.1.16 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeSwitchIndex OBJECT-TYPE The index into the Switch sensor table | 1.3.6.1.4.1.3854.1.2.2.1.18.1.17 | INTEGER (0..67) | read-only | mandatory |
| sensorProbeSwitchRelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.18.1.18 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeSwitchRelayOnPort OBJECT-TYPE The sensor port that the relay will listen to. If this is set to 255, then the relay will not listen to any sensor ports | 1.3.6.1.4.1.3854.1.2.2.1.18.1.19 | INTEGER (0..255) | read-write | mandatory |
| sensorProbeSwitchRelayActiveStatus OBJECT-TYPE Sensor status that will activate the relay | 1.3.6.1.4.1.3854.1.2.2.1.18.1.20 | INTEGER {highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), anyError(7)} | read-write | mandatory |
| sensorProbeSwitchRelayAction OBJECT-TYPE What the relay will do when the listened to port status turns to the specified active status. | 1.3.6.1.4.1.3854.1.2.2.1.18.1.21 | INTEGER {cycle(2), turn-on(3), turn-off(4)} | read-write | mandatory |
| sensorProbeSwitchEmailInterval OBJECT-TYPE CP8 Only: Minimum time between each email (can be from 0 to 60 minutes) | 1.3.6.1.4.1.3854.1.2.2.1.18.1.22 | INTEGER (0..60) | read-write | mandatory |
| sensorProbeSwitchRelayOutputVoltStatus OBJECT-TYPE SP Only: The current voltage status of the relay | 1.3.6.1.4.1.3854.1.2.2.1.18.1.23 | INTEGER {sensorError(7), noVoltagePresent(10), voltagePresent(11)} | read-only | mandatory |
| sensorProbeSwitchManualRelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.18.1.24 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeSwitchManualRelayAction OBJECT-TYPE Control the relay manualy | 1.3.6.1.4.1.3854.1.2.2.1.18.1.25 | INTEGER {allow-sensor-control(1), turn-on(3), turn-off(4), cycle-Off-On-Off(7), cycle-On-Off-On(8)} | read-write | mandatory |
| sensorProbeSwitchRelayDescOn OBJECT-TYPE Description of relay On | 1.3.6.1.4.1.3854.1.2.2.1.18.1.26 | DisplayString | read-write | mandatory |
| sensorProbeSwitchRelayDescOff OBJECT-TYPE Description of relay Off | 1.3.6.1.4.1.3854.1.2.2.1.18.1.27 | DisplayString | read-write | mandatory |
| sensorProbeSwitchIndexCount OBJECT-TYPE Number of Switch sensor online | 1.3.6.1.4.1.3854.1.2.2.1.18.1.28 | INTEGER | read-only | mandatory |
| sensorProbeSwitchSirenCycleTime OBJECT-TYPE Siren toggle period in seconds for Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.18.1.29 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeSwitchSirenOnPort OBJECT-TYPE The sensor port that the siren will listen to. If this is set to 255, then the siren will not listen to any sensor ports | 1.3.6.1.4.1.3854.1.2.2.1.18.1.30 | INTEGER (0..255) | read-write | mandatory |
| sensorProbeSwitchSirenActiveStatus OBJECT-TYPE Sensor status that will activate the siren | 1.3.6.1.4.1.3854.1.2.2.1.18.1.31 | INTEGER {highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), anyError(7)} | read-write | mandatory |
| sensorProbeSwitchSirenAction OBJECT-TYPE What the siren will do when the listened to port status turns to the specified active status. | 1.3.6.1.4.1.3854.1.2.2.1.18.1.32 | INTEGER {cycle(2), turn-on(3), turn-off(4)} | read-write | mandatory |
| sensorProbeSwitchAcknowledgement OBJECT-TYPE Acknowledged sensor error and stop notification | 1.3.6.1.4.1.3854.1.2.2.1.18.1.33 | INTEGER {ack(1)} | read-write | mandatory |
| sensorProbeSwitchSirenDelayAlarm OBJECT-TYPE Siren delay in seconds before start Alarm. | 1.3.6.1.4.1.3854.1.2.2.1.18.1.34 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeSwitchURL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.18.1.35 | DisplayString | read-write | mandatory |
| sensorProbeSwitchOpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.18.1.36 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeSwitchContTimeHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.18.1.37 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeSwitchContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.18.1.39 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeSwitchCalendar OBJECT-TYPE Enable or disable the calendar filtering working hours of sensor. | 1.3.6.1.4.1.3854.1.2.2.1.18.1.43 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeSwitchRelayControlMode OBJECT-TYPE Relay Control Mode used for selecting the mode to control a relay. | 1.3.6.1.4.1.3854.1.2.2.1.18.1.44 | INTEGER {manual-control(0), notification-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| sensorProbeSwitchSirenControlMode OBJECT-TYPE Siren Control Mode used for selecting the mode to control a siren. | 1.3.6.1.4.1.3854.1.2.2.1.18.1.45 | INTEGER {manual-control(0), notification-control(1), time-control(2)} | read-write | mandatory |
| sensorProbeSwitchSendNormalMail OBJECT-TYPE Enable sending email when sensor goes to normal | 1.3.6.1.4.1.3854.1.2.2.1.18.1.46 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeSwitchSendTrap OBJECT-TYPE Enable sending trap when sensor change status | 1.3.6.1.4.1.3854.1.2.2.1.18.1.47 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeSwitchSendMail OBJECT-TYPE Enable sending email when sensor change status | 1.3.6.1.4.1.3854.1.2.2.1.18.1.48 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeSwitchWaterRopeLeakLocation OBJECT-TYPE Location of leakage of water rope sensor. | 1.3.6.1.4.1.3854.1.2.2.1.18.1.49 | INTEGER | read-only | mandatory |
| sensorProbeSwitchWaterRopeLength OBJECT-TYPE Length of water rope sensor. | 1.3.6.1.4.1.3854.1.2.2.1.18.1.50 | INTEGER | read-only | mandatory |
| sensorProbeSwitchWaterRopeUnit OBJECT-TYPE Display unit of water rope sensor. | 1.3.6.1.4.1.3854.1.2.2.1.18.1.51 | INTEGER {meters(0), feet(1)} | read-write | mandatory |
| sensorProbeSwitchWaterRopeImpedance OBJECT-TYPE Sensing wire impedance per meter value times 100 | 1.3.6.1.4.1.3854.1.2.2.1.18.1.52 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeSwitchWaterRopeRaw OBJECT-TYPE Raw value of location or length in ohms | 1.3.6.1.4.1.3854.1.2.2.1.18.1.53 | INTEGER | read-only | mandatory |
| sensorProbeSwitchWaterRopeType OBJECT-TYPE Water rope sensing cable type | 1.3.6.1.4.1.3854.1.2.2.1.18.1.55 | INTEGER {custom(0), water(1), fuel(2)} | read-write | mandatory |
| sensorProbeOtherSensor OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19 | |||
| sensorProbeIRMSSensor OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.26 | |||
| sensorProbeIRMSSensorNumber OBJECT-TYPE The total number of RMS current Sensor port. | 1.3.6.1.4.1.3854.1.2.2.1.19.26.1 | INTEGER | read-only | mandatory |
| sensorProbeIRMSSensorTable OBJECT-TYPE This table contains the data for every RMS current Sensor in the SensorArray. Each row in the table contains data for a different RMS current Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2 | not-accessible | mandatory | |
| sensorProbeIRMSSensorEntry OBJECT-TYPE This is an entry in the sensorProbeIRMSSensorEntry Table | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1 | not-accessible | mandatory | |
| sensorProbeIRMSSensorIndex OBJECT-TYPE A unique value for each IRMS sensor port. | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeIRMSDescription OBJECT-TYPE A Description of this sensor IRMS | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeIRMSPercent OBJECT-TYPE The relative IRMS percentage measured by this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.3 | INTEGER (-32768..32767) | read-only | mandatory |
| sensorProbeIRMSStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.4 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorProbeIRMSOnline OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeIRMSGoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeIRMSHighWarning OBJECT-TYPE How high the relative IRMS this sensor measures before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.7 | INTEGER | read-write | mandatory |
| sensorProbeIRMSHighCritical OBJECT-TYPE How high the relative IRMS this sensor measures before it becomes critical | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.8 | INTEGER | read-write | mandatory |
| sensorProbeIRMSLowWarning OBJECT-TYPE How low the relative IRMS this sensor measures before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.9 | INTEGER | read-write | mandatory |
| sensorProbeIRMSLowCritical OBJECT-TYPE How low the relative IRMS this sensor measures before it becomes critical | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.10 | INTEGER | read-write | mandatory |
| sensorProbeIRMSRearm OBJECT-TYPE The percent relative IRMS to rearm the status. For example if status goes from normal to warning, the IRMS must go down spAnalogueRearm below warning before the status goes to normal | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.11 | INTEGER | read-write | mandatory |
| sensorProbeIRMSRaw OBJECT-TYPE The unformatted, raw, A/D value in this sensor. Contains more resolution than the formated percentage. This number can go from 0 to 1023 depending on the input voltage | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.13 | INTEGER | read-only | mandatory |
| sensorProbeIRMSEmailTrapLimit OBJECT-TYPE Enable email/trap limit feature | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.17 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeIRMSDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.21 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeIRMSDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.22 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeIRMSRelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.29 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeIRMSRelayOnPort OBJECT-TYPE The sensor port that the relay will listen to. If this is set to 255, then the relay will not listen to any sensor ports | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.30 | INTEGER (0..255) | read-write | mandatory |
| sensorProbeIRMSRelayActiveStatus OBJECT-TYPE Sensor status that will activate the relay | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.31 | INTEGER {highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), anyError(7)} | read-write | mandatory |
| sensorProbeIRMSRelayAction OBJECT-TYPE What the relay will do when the listened to port status turns to the specified active status. | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.32 | INTEGER {cycle(2), turn-on(3), turn-off(4)} | read-write | mandatory |
| sensorProbeIRMSSirenCycleTime OBJECT-TYPE Siren toggle period in seconds for Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.37 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeIRMSSirenOnPort OBJECT-TYPE The sensor port that the siren will listen to. If this is set to 255, then the siren will not listen to any sensor ports | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.38 | INTEGER (0..255) | read-write | mandatory |
| sensorProbeIRMSSirenActiveStatus OBJECT-TYPE Sensor status that will activate the siren | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.39 | INTEGER {highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), anyError(7)} | read-write | mandatory |
| sensorProbeIRMSSirenAction OBJECT-TYPE What the siren will do when the listened to port status turns to the specified active status. | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.40 | INTEGER {cycle(2), turn-on(3), turn-off(4)} | read-write | mandatory |
| sensorProbeIRMSAcknowledgement OBJECT-TYPE Acknowledged sensor error and stop notification | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.41 | INTEGER {ack(1)} | read-write | mandatory |
| sensorProbeIRMSSirenDelayAlarm OBJECT-TYPE Siren delay in seconds before start Alarm. | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.42 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeIRMSURL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.43 | DisplayString | read-write | mandatory |
| sensorProbeIRMSOpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.44 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeIRMSDatacollectType OBJECT-TYPE Type of datacollect to collect. | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.45 | INTEGER {average(1), highest(2), lowest(3)} | read-write | mandatory |
| sensorProbeIRMSContTimeHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.46 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeIRMSContTimeHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.47 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeIRMSContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.48 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeIRMSContTimeLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.49 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeIRMSContTimeLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.50 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeIRMSContTimeSensorError OBJECT-TYPE Continuous time for this sensor to be in Sensor Error before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.51 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeIRMSCalendar OBJECT-TYPE Enable or disable the calendar filtering working hours of sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.26.2.1.52 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeVRMSSensor OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.27 | |||
| sensorProbeVRMSSensorNumber OBJECT-TYPE The total number of RMS voltage Sensor port. | 1.3.6.1.4.1.3854.1.2.2.1.19.27.1 | INTEGER | read-only | mandatory |
| sensorProbeVRMSSensorTable OBJECT-TYPE This table contains the data for every RMS voltage Sensor in the SensorArray. Each row in the table contains data for a different RMS voltage Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2 | not-accessible | mandatory | |
| sensorProbeVRMSSensorEntry OBJECT-TYPE This is an entry in the sensorProbeVRMSSensorEntry Table | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1 | not-accessible | mandatory | |
| sensorProbeVRMSSensorIndex OBJECT-TYPE A unique value for each VRMS sensor port. | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeVRMSDescription OBJECT-TYPE A Description of this sensor VRMS | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeVRMSPercent OBJECT-TYPE The relative VRMS percentage measured by this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.3 | INTEGER (-32768..32767) | read-only | mandatory |
| sensorProbeVRMSStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.4 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorProbeVRMSOnline OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeVRMSGoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeVRMSHighWarning OBJECT-TYPE How high the relative VRMS this sensor measures before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.7 | INTEGER | read-write | mandatory |
| sensorProbeVRMSHighCritical OBJECT-TYPE How high the relative VRMS this sensor measures before it becomes critical | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.8 | INTEGER | read-write | mandatory |
| sensorProbeVRMSLowWarning OBJECT-TYPE How low the relative VRMS this sensor measures before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.9 | INTEGER | read-write | mandatory |
| sensorProbeVRMSLowCritical OBJECT-TYPE How low the relative VRMS this sensor measures before it becomes critical | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.10 | INTEGER | read-write | mandatory |
| sensorProbeVRMSRearm OBJECT-TYPE The percent relative VRMS to rearm the status. For example if status goes from normal to warning, the VRMS must go down spAnalogueRearm below warning before the status goes to normal | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.11 | INTEGER | read-write | mandatory |
| sensorProbeVRMSRaw OBJECT-TYPE The unformatted, raw, A/D value in this sensor. Contains more resolution than the formated percentage. This number can go from 0 to 1023 depending on the input voltage | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.13 | INTEGER | read-only | mandatory |
| sensorProbeVRMSEmailTrapLimit OBJECT-TYPE Enable email/trap limit feature | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.17 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeVRMSDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.21 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeVRMSDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.22 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeVRMSRelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.29 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeVRMSRelayOnPort OBJECT-TYPE The sensor port that the relay will listen to. If this is set to 255, then the relay will not listen to any sensor ports | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.30 | INTEGER (0..255) | read-write | mandatory |
| sensorProbeVRMSRelayActiveStatus OBJECT-TYPE Sensor status that will activate the relay | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.31 | INTEGER {highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), anyError(7)} | read-write | mandatory |
| sensorProbeVRMSRelayAction OBJECT-TYPE What the relay will do when the listened to port status turns to the specified active status. | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.32 | INTEGER {cycle(2), turn-on(3), turn-off(4)} | read-write | mandatory |
| sensorProbeVRMSSirenCycleTime OBJECT-TYPE Siren toggle period in seconds for Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.37 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeVRMSSirenOnPort OBJECT-TYPE The sensor port that the siren will listen to. If this is set to 255, then the siren will not listen to any sensor ports | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.38 | INTEGER (0..255) | read-write | mandatory |
| sensorProbeVRMSSirenActiveStatus OBJECT-TYPE Sensor status that will activate the siren | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.39 | INTEGER {highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), anyError(7)} | read-write | mandatory |
| sensorProbeVRMSSirenAction OBJECT-TYPE What the siren will do when the listened to port status turns to the specified active status. | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.40 | INTEGER {cycle(2), turn-on(3), turn-off(4)} | read-write | mandatory |
| sensorProbeVRMSAcknowledgement OBJECT-TYPE Acknowledged sensor error and stop notification | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.41 | INTEGER {ack(1)} | read-write | mandatory |
| sensorProbeVRMSSirenDelayAlarm OBJECT-TYPE Siren delay in seconds before start Alarm. | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.42 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeVRMSvoltageMode OBJECT-TYPE VRMS Voltage Mode. | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.43 | INTEGER {ac-110(110), ac-220(220)} | read-write | mandatory |
| sensorProbeVRMSURL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.44 | DisplayString | read-write | mandatory |
| sensorProbeVRMSOpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.45 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeVRMSDatacollectType OBJECT-TYPE Type of datacollect to collect. | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.46 | INTEGER {average(1), highest(2), lowest(3)} | read-write | mandatory |
| sensorProbeVRMSContTimeHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.47 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeVRMSContTimeHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.48 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeVRMSContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.49 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeVRMSContTimeLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.50 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeVRMSContTimeLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.51 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeVRMSContTimeSensorError OBJECT-TYPE Continuous time for this sensor to be in Sensor Error before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.52 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeVRMSCalendar OBJECT-TYPE Enable or disable the calendar filtering working hours of sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.27.2.1.53 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeEnergySensor OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.28 | |||
| sensorProbeEnergySensorNumber OBJECT-TYPE The total number of Energy Sensor port. | 1.3.6.1.4.1.3854.1.2.2.1.19.28.1 | INTEGER | read-only | mandatory |
| sensorProbeEnergySensorTable OBJECT-TYPE This table contains the data for every Energy Sensor in the SensorArray. Each row in the table contains data for a different Energy Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2 | not-accessible | mandatory | |
| sensorProbeEnergySensorEntry OBJECT-TYPE This is an entry in the sensorProbeEnergySensorEntry Table | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1 | not-accessible | mandatory | |
| sensorProbeEnergySensorIndex OBJECT-TYPE A unique value for each Energy sensor port. | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeEnergyDescription OBJECT-TYPE A Description of this sensor Energy | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeEnergyPercent OBJECT-TYPE The relative Energy percentage measured by this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.3 | INTEGER (-32768..32767) | read-only | mandatory |
| sensorProbeEnergyStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.4 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorProbeEnergyOnline OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeEnergyGoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeEnergyHighWarning OBJECT-TYPE How high the relative Energy this sensor measures before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.7 | INTEGER | read-write | mandatory |
| sensorProbeEnergyHighCritical OBJECT-TYPE How high the relative Energy this sensor measures before it becomes critical | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.8 | INTEGER | read-write | mandatory |
| sensorProbeEnergyLowWarning OBJECT-TYPE How low the relative Energy this sensor measures before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.9 | INTEGER | read-write | mandatory |
| sensorProbeEnergyLowCritical OBJECT-TYPE How low the relative Energy this sensor measures before it becomes critical | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.10 | INTEGER | read-write | mandatory |
| sensorProbeEnergyRearm OBJECT-TYPE The percent relative Energy to rearm the status. For example if status goes from normal to warning, the Energy must go down spAnalogueRearm below warning before the status goes to normal | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.11 | INTEGER | read-write | mandatory |
| sensorProbeEnergyRaw OBJECT-TYPE The unformatted, raw, A/D value in this sensor. Contains more resolution than the formated percentage. This number can go from 0 to 1023 depending on the input voltage | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.13 | INTEGER | read-only | mandatory |
| sensorProbeEnergyEmailTrapLimit OBJECT-TYPE Enable email/trap limit feature | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.17 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeEnergyDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.21 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeEnergyDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.22 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeEnergyRelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.29 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeEnergyRelayOnPort OBJECT-TYPE The sensor port that the relay will listen to. If this is set to 255, then the relay will not listen to any sensor ports | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.30 | INTEGER (0..255) | read-write | mandatory |
| sensorProbeEnergyRelayActiveStatus OBJECT-TYPE Sensor status that will activate the relay | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.31 | INTEGER {highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), anyError(7)} | read-write | mandatory |
| sensorProbeEnergyRelayAction OBJECT-TYPE What the relay will do when the listened to port status turns to the specified active status. | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.32 | INTEGER {cycle(2), turn-on(3), turn-off(4)} | read-write | mandatory |
| sensorProbeEnergySirenCycleTime OBJECT-TYPE Siren toggle period in seconds for Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.37 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeEnergySirenOnPort OBJECT-TYPE The sensor port that the siren will listen to. If this is set to 255, then the siren will not listen to any sensor ports | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.38 | INTEGER (0..255) | read-write | mandatory |
| sensorProbeEnergySirenActiveStatus OBJECT-TYPE Sensor status that will activate the siren | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.39 | INTEGER {highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), anyError(7)} | read-write | mandatory |
| sensorProbeEnergySirenAction OBJECT-TYPE What the siren will do when the listened to port status turns to the specified active status. | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.40 | INTEGER {cycle(2), turn-on(3), turn-off(4)} | read-write | mandatory |
| sensorProbeEnergyAcknowledgement OBJECT-TYPE Acknowledged sensor error and stop notification | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.41 | INTEGER {ack(1)} | read-write | mandatory |
| sensorProbeEnergySirenDelayAlarm OBJECT-TYPE Siren delay in seconds before start Alarm. | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.42 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeEnergyReadingMode OBJECT-TYPE Energy Meter Reading Mode. | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.43 | INTEGER {active(0), apparent(1)} | read-write | mandatory |
| sensorProbeEnergyURL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.44 | DisplayString | read-write | mandatory |
| sensorProbeEnergyOpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.45 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeEnergyDatacollectType OBJECT-TYPE Type of datacollect to collect. | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.46 | INTEGER {average(1), highest(2), lowest(3)} | read-write | mandatory |
| sensorProbeEnergyContTimeHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.47 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeEnergyContTimeHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.48 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeEnergyContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.49 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeEnergyContTimeLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.50 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeEnergyContTimeLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.51 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeEnergyContTimeSensorError OBJECT-TYPE Continuous time for this sensor to be in Sensor Error before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.52 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeEnergyCalendar OBJECT-TYPE Enable or disable the calendar filtering working hours of sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.28.2.1.53 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeRelayArraySensor OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.29 | |||
| sensorProbeRelayArrayPort1 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.29.1 | |||
| sensorProbeRelayArrayPort1Number OBJECT-TYPE The total number of port on the RelayArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.1.1 | INTEGER | read-only | mandatory |
| sensorProbeRelayArrayPort1Table OBJECT-TYPE This table contains the data for every Switch Sensor in the SensorArray. Each row in the table contains data for a different Switch Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.1.2 | not-accessible | mandatory | |
| sensorProbeRelayArrayPort1Entry OBJECT-TYPE This is an entry in the sensorProbeRelayArrayPort1 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.29.1.2.1 | not-accessible | mandatory | |
| sensorProbeRelayArrayPort1Index OBJECT-TYPE A unique value for each sensor RelayArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.1.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeRelayArrayPort1Description OBJECT-TYPE A Description of this sensor RelayArray | 1.3.6.1.4.1.3854.1.2.2.1.19.29.1.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort1Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.29.1.2.1.4 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorProbeRelayArrayPort1Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.29.1.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeRelayArrayPort1GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.29.1.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeRelayArrayPort1NormalState OBJECT-TYPE The normal state of RelayArray | 1.3.6.1.4.1.3854.1.2.2.1.19.29.1.2.1.7 | INTEGER {closed(0), open(1)} | read-write | mandatory |
| sensorProbeRelayArrayPort1RelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.1.2.1.18 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeRelayArrayPort1RelayAction OBJECT-TYPE What the relay will do when the listened to port status turns to the specified active status. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.1.2.1.21 | INTEGER {cycle(2), turn-on(3), turn-off(4)} | read-write | mandatory |
| sensorProbeRelayArrayPort1ManualRelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.1.2.1.24 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeRelayArrayPort1ManualRelayAction OBJECT-TYPE Control the relay manualy | 1.3.6.1.4.1.3854.1.2.2.1.19.29.1.2.1.25 | INTEGER {allow-sensor-control(1), turn-on(3), turn-off(4), cycle-Off-On-Off(7), cycle-On-Off-On(8)} | read-write | mandatory |
| sensorProbeRelayArrayPort1RelayDescOn OBJECT-TYPE Description of relay On | 1.3.6.1.4.1.3854.1.2.2.1.19.29.1.2.1.26 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort1RelayDescOff OBJECT-TYPE Description of relay Off | 1.3.6.1.4.1.3854.1.2.2.1.19.29.1.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort1URL OBJECT-TYPE Sersor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.1.2.1.28 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort1OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.1.2.1.29 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeRelayArrayPort1ControlMode OBJECT-TYPE Relay Control Mode used for selecting the mode to control a relay. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.1.2.1.30 | INTEGER {manual-control(0), notification-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| sensorProbeRelayArrayPort2 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.29.2 | |||
| sensorProbeRelayArrayPort2Number OBJECT-TYPE The total number of port on the RelayArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.2.1 | INTEGER | read-only | mandatory |
| sensorProbeRelayArrayPort2Table OBJECT-TYPE This table contains the data for every Switch Sensor in the SensorArray. Each row in the table contains data for a different Switch Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.2.2 | not-accessible | mandatory | |
| sensorProbeRelayArrayPort2Entry OBJECT-TYPE This is an entry in the sensorProbeRelayArrayPort2 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.29.2.2.1 | not-accessible | mandatory | |
| sensorProbeRelayArrayPort2Index OBJECT-TYPE A unique value for each sensor RelayArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.2.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeRelayArrayPort2Description OBJECT-TYPE A Description of this sensor RelayArray | 1.3.6.1.4.1.3854.1.2.2.1.19.29.2.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort2Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.29.2.2.1.4 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorProbeRelayArrayPort2Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.29.2.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeRelayArrayPort2GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.29.2.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeRelayArrayPort2NormalState OBJECT-TYPE The normal state of RleayArray | 1.3.6.1.4.1.3854.1.2.2.1.19.29.2.2.1.7 | INTEGER {closed(0), open(1)} | read-write | mandatory |
| sensorProbeRelayArrayPort2RelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.2.2.1.18 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeRelayArrayPort2RelayAction OBJECT-TYPE What the relay will do when the listened to port status turns to the specified active status. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.2.2.1.21 | INTEGER {cycle(2), turn-on(3), turn-off(4)} | read-write | mandatory |
| sensorProbeRelayArrayPort2ManualRelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.2.2.1.24 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeRelayArrayPort2ManualRelayAction OBJECT-TYPE Control the relay manualy | 1.3.6.1.4.1.3854.1.2.2.1.19.29.2.2.1.25 | INTEGER {allow-sensor-control(1), turn-on(3), turn-off(4), cycle-Off-On-Off(7), cycle-On-Off-On(8)} | read-write | mandatory |
| sensorProbeRelayArrayPort2RelayDescOn OBJECT-TYPE Description of relay On | 1.3.6.1.4.1.3854.1.2.2.1.19.29.2.2.1.26 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort2RelayDescOff OBJECT-TYPE Description of relay Off | 1.3.6.1.4.1.3854.1.2.2.1.19.29.2.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort2URL OBJECT-TYPE Sensor URL link | 1.3.6.1.4.1.3854.1.2.2.1.19.29.2.2.1.28 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort2OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.2.2.1.29 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeRelayArrayPort2ControlMode OBJECT-TYPE Relay Control Mode used for selecting the mode to control a relay. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.2.2.1.30 | INTEGER {manual-control(0), notification-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| sensorProbeRelayArrayPort3 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.29.3 | |||
| sensorProbeRelayArrayPort3Number OBJECT-TYPE The total number of port on the RelayArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.3.1 | INTEGER | read-only | mandatory |
| sensorProbeRelayArrayPort3Table OBJECT-TYPE This table contains the data for every Switch Sensor in the SensorArray. Each row in the table contains data for a different Switch Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.3.2 | not-accessible | mandatory | |
| sensorProbeRelayArrayPort3Entry OBJECT-TYPE This is an entry in the sensorProbeRelayArrayPort3 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.29.3.2.1 | not-accessible | mandatory | |
| sensorProbeRelayArrayPort3Index OBJECT-TYPE A unique value for each sensor RelayArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.3.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeRelayArrayPort3Description OBJECT-TYPE A Description of this sensor RelayArray | 1.3.6.1.4.1.3854.1.2.2.1.19.29.3.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort3Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.29.3.2.1.4 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorProbeRelayArrayPort3Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.29.3.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeRelayArrayPort3GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.29.3.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeRelayArrayPort3NormalState OBJECT-TYPE The normal state of RleayArray | 1.3.6.1.4.1.3854.1.2.2.1.19.29.3.2.1.7 | INTEGER {closed(0), open(1)} | read-write | mandatory |
| sensorProbeRelayArrayPort3RelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.3.2.1.18 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeRelayArrayPort3RelayAction OBJECT-TYPE What the relay will do when the listened to port status turns to the specified active status. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.3.2.1.21 | INTEGER {cycle(2), turn-on(3), turn-off(4)} | read-write | mandatory |
| sensorProbeRelayArrayPort3ManualRelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.3.2.1.24 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeRelayArrayPort3ManualRelayAction OBJECT-TYPE Control the relay manualy | 1.3.6.1.4.1.3854.1.2.2.1.19.29.3.2.1.25 | INTEGER {allow-sensor-control(1), turn-on(3), turn-off(4), cycle-Off-On-Off(7), cycle-On-Off-On(8)} | read-write | mandatory |
| sensorProbeRelayArrayPort3RelayDescOn OBJECT-TYPE Description of relay On | 1.3.6.1.4.1.3854.1.2.2.1.19.29.3.2.1.26 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort3RelayDescOff OBJECT-TYPE Description of relay Off | 1.3.6.1.4.1.3854.1.2.2.1.19.29.3.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort3URL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.3.2.1.28 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort3OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.3.2.1.29 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeRelayArrayPort3ControlMode OBJECT-TYPE Relay Control Mode used for selecting the mode to control a relay. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.3.2.1.30 | INTEGER {manual-control(0), notification-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| sensorProbeRelayArrayPort4 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.29.4 | |||
| sensorProbeRelayArrayPort4Number OBJECT-TYPE The total number of port on the RelayArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.4.1 | INTEGER | read-only | mandatory |
| sensorProbeRelayArrayPort4Table OBJECT-TYPE This table contains the data for every Switch Sensor in the SensorArray. Each row in the table contains data for a different Switch Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.4.2 | not-accessible | mandatory | |
| sensorProbeRelayArrayPort4Entry OBJECT-TYPE This is an entry in the sensorProbeRelayArrayPort4 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.29.4.2.1 | not-accessible | mandatory | |
| sensorProbeRelayArrayPort4Index OBJECT-TYPE A unique value for each sensor RelayArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.4.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeRelayArrayPort4Description OBJECT-TYPE A Description of this sensor RelayArray | 1.3.6.1.4.1.3854.1.2.2.1.19.29.4.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort4Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.29.4.2.1.4 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorProbeRelayArrayPort4Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.29.4.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeRelayArrayPort4GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.29.4.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeRelayArrayPort4NormalState OBJECT-TYPE The normal state of RleayArray | 1.3.6.1.4.1.3854.1.2.2.1.19.29.4.2.1.7 | INTEGER {closed(0), open(1)} | read-write | mandatory |
| sensorProbeRelayArrayPort4RelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.4.2.1.18 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeRelayArrayPort4RelayAction OBJECT-TYPE What the relay will do when the listened to port status turns to the specified active status. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.4.2.1.21 | INTEGER {cycle(2), turn-on(3), turn-off(4)} | read-write | mandatory |
| sensorProbeRelayArrayPort4ManualRelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.4.2.1.24 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeRelayArrayPort4ManualRelayAction OBJECT-TYPE Control the relay manualy | 1.3.6.1.4.1.3854.1.2.2.1.19.29.4.2.1.25 | INTEGER {allow-sensor-control(1), turn-on(3), turn-off(4), cycle-Off-On-Off(7), cycle-On-Off-On(8)} | read-write | mandatory |
| sensorProbeRelayArrayPort4RelayDescOn OBJECT-TYPE Description of relay On | 1.3.6.1.4.1.3854.1.2.2.1.19.29.4.2.1.26 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort4RelayDescOff OBJECT-TYPE Description of relay Off | 1.3.6.1.4.1.3854.1.2.2.1.19.29.4.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort4URL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.4.2.1.28 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort4OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.4.2.1.29 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeRelayArrayPort4ControlMode OBJECT-TYPE Relay Control Mode used for selecting the mode to control a relay. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.4.2.1.30 | INTEGER {manual-control(0), notification-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| sensorProbeRelayArrayPort5 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.29.5 | |||
| sensorProbeRelayArrayPort5Number OBJECT-TYPE The total number of port on the RelayArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.5.1 | INTEGER | read-only | mandatory |
| sensorProbeRelayArrayPort5Table OBJECT-TYPE This table contains the data for every Switch Sensor in the SensorArray. Each row in the table contains data for a different Switch Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.5.2 | not-accessible | mandatory | |
| sensorProbeRelayArrayPort5Entry OBJECT-TYPE This is an entry in the sensorProbeRelayArrayPort5 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.29.5.2.1 | not-accessible | mandatory | |
| sensorProbeRelayArrayPort5Index OBJECT-TYPE A unique value for each sensor RelayArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.5.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeRelayArrayPort5Description OBJECT-TYPE A Description of this sensor RelayArray | 1.3.6.1.4.1.3854.1.2.2.1.19.29.5.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort5Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.29.5.2.1.4 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorProbeRelayArrayPort5Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.29.5.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeRelayArrayPort5GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.29.5.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeRelayArrayPort5NormalState OBJECT-TYPE The normal state of RleayArray | 1.3.6.1.4.1.3854.1.2.2.1.19.29.5.2.1.7 | INTEGER {closed(0), open(1)} | read-write | mandatory |
| sensorProbeRelayArrayPort5RelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.5.2.1.18 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeRelayArrayPort5RelayAction OBJECT-TYPE What the relay will do when the listened to port status turns to the specified active status. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.5.2.1.21 | INTEGER {cycle(2), turn-on(3), turn-off(4)} | read-write | mandatory |
| sensorProbeRelayArrayPort5ManualRelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.5.2.1.24 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeRelayArrayPort5ManualRelayAction OBJECT-TYPE Control the relay manualy | 1.3.6.1.4.1.3854.1.2.2.1.19.29.5.2.1.25 | INTEGER {allow-sensor-control(1), turn-on(3), turn-off(4), cycle-Off-On-Off(7), cycle-On-Off-On(8)} | read-write | mandatory |
| sensorProbeRelayArrayPort5RelayDescOn OBJECT-TYPE Description of relay On | 1.3.6.1.4.1.3854.1.2.2.1.19.29.5.2.1.26 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort5RelayDescOff OBJECT-TYPE Description of relay Off | 1.3.6.1.4.1.3854.1.2.2.1.19.29.5.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort5URL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.5.2.1.28 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort5OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.5.2.1.29 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeRelayArrayPort5ControlMode OBJECT-TYPE Relay Control Mode used for selecting the mode to control a relay. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.5.2.1.30 | INTEGER {manual-control(0), notification-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| sensorProbeRelayArrayPort6 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.29.6 | |||
| sensorProbeRelayArrayPort6Number OBJECT-TYPE The total number of port on the RelayArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.6.1 | INTEGER | read-only | mandatory |
| sensorProbeRelayArrayPort6Table OBJECT-TYPE This table contains the data for every Switch Sensor in the SensorArray. Each row in the table contains data for a different Switch Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.6.2 | not-accessible | mandatory | |
| sensorProbeRelayArrayPort6Entry OBJECT-TYPE This is an entry in the sensorProbeRelayArrayPort6 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.29.6.2.1 | not-accessible | mandatory | |
| sensorProbeRelayArrayPort6Index OBJECT-TYPE A unique value for each sensor RelayArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.6.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeRelayArrayPort6Description OBJECT-TYPE A Description of this sensor RelayArray | 1.3.6.1.4.1.3854.1.2.2.1.19.29.6.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort6Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.29.6.2.1.4 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorProbeRelayArrayPort6Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.29.6.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeRelayArrayPort6GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.29.6.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeRelayArrayPort6NormalState OBJECT-TYPE The normal state of RleayArray | 1.3.6.1.4.1.3854.1.2.2.1.19.29.6.2.1.7 | INTEGER {closed(0), open(1)} | read-write | mandatory |
| sensorProbeRelayArrayPort6RelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.6.2.1.18 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeRelayArrayPort6RelayAction OBJECT-TYPE What the relay will do when the listened to port status turns to the specified active status. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.6.2.1.21 | INTEGER {cycle(2), turn-on(3), turn-off(4)} | read-write | mandatory |
| sensorProbeRelayArrayPort6ManualRelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.6.2.1.24 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeRelayArrayPort6ManualRelayAction OBJECT-TYPE Control the relay manualy | 1.3.6.1.4.1.3854.1.2.2.1.19.29.6.2.1.25 | INTEGER {allow-sensor-control(1), turn-on(3), turn-off(4), cycle-Off-On-Off(7), cycle-On-Off-On(8)} | read-write | mandatory |
| sensorProbeRelayArrayPort6RelayDescOn OBJECT-TYPE Description of relay On | 1.3.6.1.4.1.3854.1.2.2.1.19.29.6.2.1.26 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort6RelayDescOff OBJECT-TYPE Description of relay Off | 1.3.6.1.4.1.3854.1.2.2.1.19.29.6.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort6URL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.6.2.1.28 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort6OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.6.2.1.29 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeRelayArrayPort6ControlMode OBJECT-TYPE Relay Control Mode used for selecting the mode to control a relay. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.6.2.1.30 | INTEGER {manual-control(0), notification-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| sensorProbeRelayArrayPort7 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.29.7 | |||
| sensorProbeRelayArrayPort7Number OBJECT-TYPE The total number of port on the RelayArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.7.1 | INTEGER | read-only | mandatory |
| sensorProbeRelayArrayPort7Table OBJECT-TYPE This table contains the data for every Switch Sensor in the SensorArray. Each row in the table contains data for a different Switch Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.7.2 | not-accessible | mandatory | |
| sensorProbeRelayArrayPort7Entry OBJECT-TYPE This is an entry in the sensorProbeRelayArrayPort7 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.29.7.2.1 | not-accessible | mandatory | |
| sensorProbeRelayArrayPort7Index OBJECT-TYPE A unique value for each sensor RelayArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.7.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeRelayArrayPort7Description OBJECT-TYPE A Description of this sensor RelayArray | 1.3.6.1.4.1.3854.1.2.2.1.19.29.7.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort7Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.29.7.2.1.4 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorProbeRelayArrayPort7Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.29.7.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeRelayArrayPort7GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.29.7.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeRelayArrayPort7NormalState OBJECT-TYPE The normal state of RleayArray | 1.3.6.1.4.1.3854.1.2.2.1.19.29.7.2.1.7 | INTEGER {closed(0), open(1)} | read-write | mandatory |
| sensorProbeRelayArrayPort7RelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.7.2.1.18 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeRelayArrayPort7RelayAction OBJECT-TYPE What the relay will do when the listened to port status turns to the specified active status. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.7.2.1.21 | INTEGER {cycle(2), turn-on(3), turn-off(4)} | read-write | mandatory |
| sensorProbeRelayArrayPort7ManualRelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.7.2.1.24 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeRelayArrayPort7ManualRelayAction OBJECT-TYPE Control the relay manualy | 1.3.6.1.4.1.3854.1.2.2.1.19.29.7.2.1.25 | INTEGER {allow-sensor-control(1), turn-on(3), turn-off(4), cycle-Off-On-Off(7), cycle-On-Off-On(8)} | read-write | mandatory |
| sensorProbeRelayArrayPort7RelayDescOn OBJECT-TYPE Description of relay On | 1.3.6.1.4.1.3854.1.2.2.1.19.29.7.2.1.26 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort7RelayDescOff OBJECT-TYPE Description of relay Off | 1.3.6.1.4.1.3854.1.2.2.1.19.29.7.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort7URL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.7.2.1.28 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort7OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.7.2.1.29 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeRelayArrayPort7ControlMode OBJECT-TYPE Relay Control Mode used for selecting the mode to control a relay. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.7.2.1.30 | INTEGER {manual-control(0), notification-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| sensorProbeRelayArrayPort8 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.29.8 | |||
| sensorProbeRelayArrayPort8Number OBJECT-TYPE The total number of port on the RelayArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.8.1 | INTEGER | read-only | mandatory |
| sensorProbeRelayArrayPort8Table OBJECT-TYPE This table contains the data for every Switch Sensor in the SensorArray. Each row in the table contains data for a different Switch Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.8.2 | not-accessible | mandatory | |
| sensorProbeRelayArrayPort8Entry OBJECT-TYPE This is an entry in the sensorProbeRelayArrayPort8 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.29.8.2.1 | not-accessible | mandatory | |
| sensorProbeRelayArrayPort8Index OBJECT-TYPE A unique value for each sensor RelayArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.8.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeRelayArrayPort8Description OBJECT-TYPE A Description of this sensor RelayArray | 1.3.6.1.4.1.3854.1.2.2.1.19.29.8.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort8Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.29.8.2.1.4 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorProbeRelayArrayPort8Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.29.8.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeRelayArrayPort8GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.29.8.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeRelayArrayPort8NormalState OBJECT-TYPE The normal state of RleayArray | 1.3.6.1.4.1.3854.1.2.2.1.19.29.8.2.1.7 | INTEGER {closed(0), open(1)} | read-write | mandatory |
| sensorProbeRelayArrayPort8RelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.8.2.1.18 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeRelayArrayPort8RelayAction OBJECT-TYPE What the relay will do when the listened to port status turns to the specified active status. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.8.2.1.21 | INTEGER {cycle(2), turn-on(3), turn-off(4)} | read-write | mandatory |
| sensorProbeRelayArrayPort8ManualRelayCycleTime OBJECT-TYPE Relay toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.8.2.1.24 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeRelayArrayPort8ManualRelayAction OBJECT-TYPE Control the relay manualy | 1.3.6.1.4.1.3854.1.2.2.1.19.29.8.2.1.25 | INTEGER {allow-sensor-control(1), turn-on(3), turn-off(4), cycle-Off-On-Off(7), cycle-On-Off-On(8)} | read-write | mandatory |
| sensorProbeRelayArrayPort8RelayDescOn OBJECT-TYPE Description of relay On | 1.3.6.1.4.1.3854.1.2.2.1.19.29.8.2.1.26 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort8RelayDescOff OBJECT-TYPE Description of relay Off | 1.3.6.1.4.1.3854.1.2.2.1.19.29.8.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort8URL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.8.2.1.28 | DisplayString | read-write | mandatory |
| sensorProbeRelayArrayPort8OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.8.2.1.29 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeRelayArrayPort8ControlMode OBJECT-TYPE Relay Control Mode used for selecting the mode to control a relay. | 1.3.6.1.4.1.3854.1.2.2.1.19.29.8.2.1.30 | INTEGER {manual-control(0), notification-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| sensorProbeVirtualAnalogSensor OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.30 | |||
| sensorProbeVirtualAnalogSensorNumber OBJECT-TYPE The total number of VirtualAnalog Sensor port. | 1.3.6.1.4.1.3854.1.2.2.1.19.30.1 | INTEGER | read-only | mandatory |
| sensorProbeVirtualAnalogSensorTable OBJECT-TYPE This table contains the data for every VirtualAnalog Sensor in the SensorArray. Each row in the table contains data for a different VirtualAnalog Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2 | not-accessible | mandatory | |
| sensorProbeVirtualAnalogSensorEntry OBJECT-TYPE This is an entry in the sensorProbeVirtualAnalogSensorEntry Table | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1 | not-accessible | mandatory | |
| sensorProbeVirtualAnalogSensorIndex OBJECT-TYPE A unique value for each VirtualAnalog sensor port. | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.1 | INTEGER (0..67) | read-only | mandatory |
| sensorProbeVirtualAnalogDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeVirtualAnalogStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.4 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorProbeVirtualAnalogOnline OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeVirtualAnalogGoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeVirtualAnalogHighWarning OBJECT-TYPE How high the relative VirtualAnalog this sensor measures before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.7 | INTEGER | read-write | mandatory |
| sensorProbeVirtualAnalogHighCritical OBJECT-TYPE How high the relative VirtualAnalog this sensor measures before it becomes critical | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.8 | INTEGER | read-write | mandatory |
| sensorProbeVirtualAnalogLowWarning OBJECT-TYPE How low the relative VirtualAnalog this sensor measures before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.9 | INTEGER | read-write | mandatory |
| sensorProbeVirtualAnalogLowCritical OBJECT-TYPE How low the relative VirtualAnalog this sensor measures before it becomes critical | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.10 | INTEGER | read-write | mandatory |
| sensorProbeVirtualAnalogRearm OBJECT-TYPE The percent relative VirtualAnalog to rearm the status. For example if status goes from normal to warning, the VirtualAnalog must go down spAnalogueRearm below warning before the status goes to normal | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.11 | INTEGER | read-write | mandatory |
| sensorProbeVirtualAnalogRaw OBJECT-TYPE The unformatted, raw, A/D value in this sensor. Contains more resolution than the formated percentage. This number can go from 0 to 1023 depending on the input voltage | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.13 | INTEGER | read-only | mandatory |
| sensorProbeVirtualAnalogEmailTrapLimit OBJECT-TYPE Enable email/trap limit feature | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.17 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeVirtualAnalogDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.21 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeVirtualAnalogDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.22 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeVirtualAnalogUnit OBJECT-TYPE Display unit in VirtualAnalog. | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeVirtualAnalogAcknowledgement OBJECT-TYPE Acknowledged sensor error and stop notification | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.41 | INTEGER {ack(1)} | read-write | mandatory |
| sensorProbeVirtualAnalogURL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.43 | DisplayString | read-write | mandatory |
| sensorProbeVirtualAnalogOpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.44 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeVirtualAnalogContTimeHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.45 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeVirtualAnalogContTimeHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.46 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeVirtualAnalogContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.47 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeVirtualAnalogContTimeLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.48 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeVirtualAnalogContTimeLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.49 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeVirtualAnalogContTimeSensorError OBJECT-TYPE Continuous time for this sensor to be in Sensor Error before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.50 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeVirtualAnalogCalendar OBJECT-TYPE Enable or disable the calendar filtering working hours of sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.51 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeVirtualAnalogValueFactor OBJECT-TYPE To change the ratio of value. | 1.3.6.1.4.1.3854.1.2.2.1.19.30.2.1.52 | INTEGER {x1(1), x0-1(10), x0-01(100), x0-001(1000)} | read-write | mandatory |
| sensorProbeVirtualSwitchSensor OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.31 | |||
| sensorProbeVirtualSwitchSensorNumber OBJECT-TYPE The total number of VirtualSwitch Sensor port. | 1.3.6.1.4.1.3854.1.2.2.1.19.31.1 | INTEGER | read-only | mandatory |
| sensorProbeVirtualSwitchSensorTable OBJECT-TYPE This table contains the data for every VirtualSwitch Sensor in the SensorArray. Each row in the table contains data for a different VirtualSwitch Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.31.2 | not-accessible | mandatory | |
| sensorProbeVirtualSwitchSensorEntry OBJECT-TYPE This is an entry in the sensorProbeVirtualSwitchSensorEntry Table | 1.3.6.1.4.1.3854.1.2.2.1.19.31.2.1 | not-accessible | mandatory | |
| sensorProbeVirtualSwitchSensorIndex OBJECT-TYPE A unique value for each VirtualSwitch sensor port. | 1.3.6.1.4.1.3854.1.2.2.1.19.31.2.1.1 | INTEGER (0..67) | read-only | mandatory |
| sensorProbeVirtualSwitchDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.31.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeVirtualSwitchStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.31.2.1.4 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorProbeVirtualSwitchOnline OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.31.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeVirtualSwitchGoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.31.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeVirtualSwitchEmailTrapLimit OBJECT-TYPE Enable email/trap limit feature | 1.3.6.1.4.1.3854.1.2.2.1.19.31.2.1.17 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeVirtualSwitchContTimeHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.31.2.1.21 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeVirtualSwitchContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.31.2.1.22 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeVirtualSwitchDescriptionCritical OBJECT-TYPE Description of status when the virsual switch is critical | 1.3.6.1.4.1.3854.1.2.2.1.19.31.2.1.26 | DisplayString | read-write | mandatory |
| sensorProbeVirtualSwitchDescriptionNormal OBJECT-TYPE Description of status when the virsual switch is normal | 1.3.6.1.4.1.3854.1.2.2.1.19.31.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeVirtualSwitchAcknowledgement OBJECT-TYPE Acknowledged sensor error and stop notification | 1.3.6.1.4.1.3854.1.2.2.1.19.31.2.1.41 | INTEGER {ack(1)} | read-write | mandatory |
| sensorProbeVirtualSwitchURL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.31.2.1.43 | DisplayString | read-write | mandatory |
| sensorProbeVirtualSwitchOpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.31.2.1.44 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeVirtualSwitchCalendar OBJECT-TYPE Enable or disable the calendar filtering working hours of sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.31.2.1.45 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeVirtualSwitchNormalState OBJECT-TYPE The normal state of a return of the virsual switch. If a return of the virsual switch is equal this normal state value, it is normal. Otherwise, it is critical. | 1.3.6.1.4.1.3854.1.2.2.1.19.31.2.1.46 | INTEGER | read-write | mandatory |
| sensorProbeWattHoursSensor OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.32 | |||
| sensorProbeWattHoursSensorNumber OBJECT-TYPE The total number of WattHours Sensor port. | 1.3.6.1.4.1.3854.1.2.2.1.19.32.1 | INTEGER | read-only | mandatory |
| sensorProbeWattHoursSensorTable OBJECT-TYPE This table contains the data for every WattHours Sensor in the SensorArray. Each row in the table contains data for a different WattHours Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.32.2 | not-accessible | mandatory | |
| sensorProbeWattHoursSensorEntry OBJECT-TYPE This is an entry in the sensorProbeWattHoursSensorEntry Table | 1.3.6.1.4.1.3854.1.2.2.1.19.32.2.1 | not-accessible | mandatory | |
| sensorProbeWattHoursSensorIndex OBJECT-TYPE A unique value for each WattHours sensor port. | 1.3.6.1.4.1.3854.1.2.2.1.19.32.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeWattHoursDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.32.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeWattHoursPercent OBJECT-TYPE The relative WattHours percentage measured by this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.32.2.1.3 | INTEGER (-32768..32767) | read-only | mandatory |
| sensorProbeWattHoursReset OBJECT-TYPE The relative WattHours percentage measured by this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.32.2.1.43 | INTEGER (1) | read-write | mandatory |
| sensorProbeTemperatureArraySensor OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.33 | |||
| sensorProbeTemperatureArrayPort1 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1 | |||
| sensorProbeTemperatureArrayPort1Number OBJECT-TYPE The total number of port on the TemperatureArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.1 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort1Table OBJECT-TYPE This table contains the data for every Switch Sensor in the SensorArray. Each row in the table contains data for a different Switch Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2 | not-accessible | mandatory | |
| sensorProbeTemperatureArrayPort1Entry OBJECT-TYPE This is an entry in the sensorProbeTemperatureArrayPort1 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1 | not-accessible | mandatory | |
| sensorProbeTemperatureArrayPort1Index OBJECT-TYPE A unique value for each sensor TemperatureArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeTemperatureArrayPort1Description OBJECT-TYPE A Description of this sensor TemperatureArray | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort1Value OBJECT-TYPE The value in this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.3 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort1Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.4 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorProbeTemperatureArrayPort1Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeTemperatureArrayPort1GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort1HighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.7 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort1HighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.8 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort1LowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.9 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort1LowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.10 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort1Rearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.11 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort1DegreeType OBJECT-TYPE The degrees are in fahrenheit(0) or in celsius(1) | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.12 | INTEGER {fahr(0), celsius(1)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort1DegreeRaw OBJECT-TYPE The raw degree data from the temperature sensor, slightly higher resolution | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.14 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort1Offset OBJECT-TYPE Offset reading | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.15 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort1URL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.16 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort1OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.17 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort1DatacollectType OBJECT-TYPE Type of datacollect to collect. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.18 | INTEGER {average(1), highest(2), lowest(3)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort1ContTimeHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.19 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort1ContTimeHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.20 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort1ContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.21 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort1ContTimeLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.22 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort1ContTimeLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.23 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort1ContTimeSensorError OBJECT-TYPE Continuous time for this sensor to be in Sensor Error before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.24 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort1Calendar OBJECT-TYPE Enable or disable the calendar filtering working hours of sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.25 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort1Index OBJECT-TYPE A unique value for each sensor thermostat port. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.26 | INTEGER | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort1Description OBJECT-TYPE A Description of this sensor thermostat | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort1Value OBJECT-TYPE The value in this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.28 | INTEGER | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort1Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.29 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort1GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.30 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort1Mode OBJECT-TYPE To select the thermostat mode for working on time-bases(1) or normal(0). | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.31 | INTEGER {normal(0), time-bases(1)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort1RelayControlPort OBJECT-TYPE To select a relay port to be controled by this thermostat sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.32 | INTEGER | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort1NormalAction1 OBJECT-TYPE Profile1: Thermostat normal action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.33 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort1HighLimit1 OBJECT-TYPE Profile1: When this sersor higher than thermostat high limit, it will take a high limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.34 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort1HighLimitAction1 OBJECT-TYPE Profile1: Thermostat high limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.35 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort1LowLimit1 OBJECT-TYPE Profile1: When this sersor higher than thermostat low limit, it will take a normal limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.36 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort1LowLimitAction1 OBJECT-TYPE Profile1: Thermostat low limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.37 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort1NormalAction2 OBJECT-TYPE Profile2: Thermostat normal action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.38 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort1HighLimit2 OBJECT-TYPE Profile2: When this sersor higher than thermostat high limit, it will take a high limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.39 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort1HighLimitAction2 OBJECT-TYPE Profile2: Thermostat high limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.40 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort1LowLimit2 OBJECT-TYPE Profile2: When this sersor higher than thermostat low limit, it will take a normal limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.41 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort1LowLimitAction2 OBJECT-TYPE Profile2: Thermostat low limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.42 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort1EnableTime OBJECT-TYPE Time to enable on Thermostat | 1.3.6.1.4.1.3854.1.2.2.1.19.33.1.2.1.43 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort2 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2 | |||
| sensorProbeTemperatureArrayPort2Number OBJECT-TYPE The total number of port on the TemperatureArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.1 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort2Table OBJECT-TYPE This table contains the data for every Switch Sensor in the SensorArray. Each row in the table contains data for a different Switch Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2 | not-accessible | mandatory | |
| sensorProbeTemperatureArrayPort2Entry OBJECT-TYPE This is an entry in the sensorProbeTemperatureArrayPort2 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1 | not-accessible | mandatory | |
| sensorProbeTemperatureArrayPort2Index OBJECT-TYPE A unique value for each sensor TemperatureArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeTemperatureArrayPort2Description OBJECT-TYPE A Description of this sensor TemperatureArray | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort2Value OBJECT-TYPE The value in this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.3 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort2Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.4 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorProbeTemperatureArrayPort2Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeTemperatureArrayPort2GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort2HighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.7 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort2HighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.8 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort2LowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.9 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort2LowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.10 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort2Rearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.11 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort2DegreeType OBJECT-TYPE The degrees are in fahrenheit(0) or in celsius(1) | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.12 | INTEGER {fahr(0), celsius(1)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort2DegreeRaw OBJECT-TYPE The raw degree data from the temperature sensor, slightly higher resolution | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.14 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort2Offset OBJECT-TYPE Offset reading | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.15 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort2URL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.16 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort2OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.17 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort2DatacollectType OBJECT-TYPE Type of datacollect to collect. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.18 | INTEGER {average(1), highest(2), lowest(3)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort2ContTimeHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.19 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort2ContTimeHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.20 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort2ContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.21 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort2ContTimeLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.22 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort2ContTimeLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.23 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort2ContTimeSensorError OBJECT-TYPE Continuous time for this sensor to be in Sensor Error before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.24 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort2Calendar OBJECT-TYPE Enable or disable the calendar filtering working hours of sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.25 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort2Index OBJECT-TYPE A unique value for each sensor thermostat port. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.26 | INTEGER | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort2Description OBJECT-TYPE A Description of this sensor thermostat | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort2Value OBJECT-TYPE The value in this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.28 | INTEGER | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort2Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.29 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort2GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.30 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort2Mode OBJECT-TYPE To select the thermostat mode for working on time-bases(1) or normal(0). | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.31 | INTEGER {normal(0), time-bases(1)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort2RelayControlPort OBJECT-TYPE To select a relay port to be controled by this thermostat sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.32 | INTEGER | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort2NormalAction1 OBJECT-TYPE Profile1: Thermostat normal action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.33 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort2HighLimit1 OBJECT-TYPE Profile1: When this sersor higher than thermostat high limit, it will take a high limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.34 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort2HighLimitAction1 OBJECT-TYPE Profile1: Thermostat high limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.35 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort2LowLimit1 OBJECT-TYPE Profile1: When this sersor higher than thermostat low limit, it will take a normal limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.36 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort2LowLimitAction1 OBJECT-TYPE Profile1: Thermostat low limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.37 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort2NormalAction2 OBJECT-TYPE Profile2: Thermostat normal action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.38 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort2HighLimit2 OBJECT-TYPE Profile2: When this sersor higher than thermostat high limit, it will take a high limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.39 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort2HighLimitAction2 OBJECT-TYPE Profile2: Thermostat high limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.40 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort2LowLimit2 OBJECT-TYPE Profile2: When this sersor higher than thermostat low limit, it will take a normal limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.41 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort2LowLimitAction2 OBJECT-TYPE Profile2: Thermostat low limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.42 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort2EnableTime OBJECT-TYPE Time to enable on Thermostat | 1.3.6.1.4.1.3854.1.2.2.1.19.33.2.2.1.43 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort3 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3 | |||
| sensorProbeTemperatureArrayPort3Number OBJECT-TYPE The total number of port on the TemperatureArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.1 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort3Table OBJECT-TYPE This table contains the data for every Switch Sensor in the SensorArray. Each row in the table contains data for a different Switch Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2 | not-accessible | mandatory | |
| sensorProbeTemperatureArrayPort3Entry OBJECT-TYPE This is an entry in the sensorProbeTemperatureArrayPort3 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1 | not-accessible | mandatory | |
| sensorProbeTemperatureArrayPort3Index OBJECT-TYPE A unique value for each sensor TemperatureArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeTemperatureArrayPort3Description OBJECT-TYPE A Description of this sensor TemperatureArray | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort3Value OBJECT-TYPE The value in this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.3 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort3Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.4 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorProbeTemperatureArrayPort3Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeTemperatureArrayPort3GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort3HighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.7 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort3HighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.8 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort3LowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.9 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort3LowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.10 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort3Rearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.11 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort3DegreeType OBJECT-TYPE The degrees are in fahrenheit(0) or in celsius(1) | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.12 | INTEGER {fahr(0), celsius(1)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort3DegreeRaw OBJECT-TYPE The raw degree data from the temperature sensor, slightly higher resolution | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.14 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort3Offset OBJECT-TYPE Offset reading | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.15 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort3URL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.16 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort3OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.17 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort3DatacollectType OBJECT-TYPE Type of datacollect to collect. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.18 | INTEGER {average(1), highest(2), lowest(3)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort3ContTimeHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.19 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort3ContTimeHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.20 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort3ContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.21 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort3ContTimeLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.22 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort3ContTimeLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.23 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort3ContTimeSensorError OBJECT-TYPE Continuous time for this sensor to be in Sensor Error before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.24 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort3Calendar OBJECT-TYPE Enable or disable the calendar filtering working hours of sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.25 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort3Index OBJECT-TYPE A unique value for each sensor thermostat port. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.26 | INTEGER | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort3Description OBJECT-TYPE A Description of this sensor thermostat | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort3Value OBJECT-TYPE The value in this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.28 | INTEGER | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort3Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.29 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort3GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.30 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort3Mode OBJECT-TYPE To select the thermostat mode for working on time-bases(1) or normal(0). | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.31 | INTEGER {normal(0), time-bases(1)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort3RelayControlPort OBJECT-TYPE To select a relay port to be controled by this thermostat sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.32 | INTEGER | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort3NormalAction1 OBJECT-TYPE Profile1: Thermostat normal action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.33 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort3HighLimit1 OBJECT-TYPE Profile1: When this sersor higher than thermostat high limit, it will take a high limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.34 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort3HighLimitAction1 OBJECT-TYPE Profile1: Thermostat high limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.35 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort3LowLimit1 OBJECT-TYPE Profile1: When this sersor higher than thermostat low limit, it will take a normal limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.36 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort3LowLimitAction1 OBJECT-TYPE Profile1: Thermostat low limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.37 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort3NormalAction2 OBJECT-TYPE Profile2: Thermostat normal action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.38 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort3HighLimit2 OBJECT-TYPE Profile2: When this sersor higher than thermostat high limit, it will take a high limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.39 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort3HighLimitAction2 OBJECT-TYPE Profile2: Thermostat high limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.40 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort3LowLimit2 OBJECT-TYPE Profile2: When this sersor higher than thermostat low limit, it will take a normal limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.41 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort3LowLimitAction2 OBJECT-TYPE Profile2: Thermostat low limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.42 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort3EnableTime OBJECT-TYPE Time to enable on Thermostat | 1.3.6.1.4.1.3854.1.2.2.1.19.33.3.2.1.43 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort4 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4 | |||
| sensorProbeTemperatureArrayPort4Number OBJECT-TYPE The total number of port on the TemperatureArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.1 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort4Table OBJECT-TYPE This table contains the data for every Switch Sensor in the SensorArray. Each row in the table contains data for a different Switch Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2 | not-accessible | mandatory | |
| sensorProbeTemperatureArrayPort4Entry OBJECT-TYPE This is an entry in the sensorProbeTemperatureArrayPort4 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1 | not-accessible | mandatory | |
| sensorProbeTemperatureArrayPort4Index OBJECT-TYPE A unique value for each sensor TemperatureArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeTemperatureArrayPort4Description OBJECT-TYPE A Description of this sensor TemperatureArray | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort4Value OBJECT-TYPE The value in this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.3 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort4Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.4 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorProbeTemperatureArrayPort4Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeTemperatureArrayPort4GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort4HighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.7 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort4HighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.8 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort4LowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.9 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort4LowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.10 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort4Rearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.11 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort4DegreeType OBJECT-TYPE The degrees are in fahrenheit(0) or in celsius(1) | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.12 | INTEGER {fahr(0), celsius(1)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort4DegreeRaw OBJECT-TYPE The raw degree data from the temperature sensor, slightly higher resolution | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.14 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort4Offset OBJECT-TYPE Offset reading | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.15 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort4URL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.16 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort4OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.17 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort4DatacollectType OBJECT-TYPE Type of datacollect to collect. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.18 | INTEGER {average(1), highest(2), lowest(3)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort4ContTimeHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.19 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort4ContTimeHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.20 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort4ContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.21 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort4ContTimeLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.22 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort4ContTimeLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.23 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort4ContTimeSensorError OBJECT-TYPE Continuous time for this sensor to be in Sensor Error before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.24 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort4Calendar OBJECT-TYPE Enable or disable the calendar filtering working hours of sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.25 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort4Index OBJECT-TYPE A unique value for each sensor thermostat port. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.26 | INTEGER | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort4Description OBJECT-TYPE A Description of this sensor thermostat | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort4Value OBJECT-TYPE The value in this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.28 | INTEGER | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort4Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.29 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort4GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.30 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort4Mode OBJECT-TYPE To select the thermostat mode for working on time-bases(1) or normal(0). | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.31 | INTEGER {normal(0), time-bases(1)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort4RelayControlPort OBJECT-TYPE To select a relay port to be controled by this thermostat sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.32 | INTEGER | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort4NormalAction1 OBJECT-TYPE Profile1: Thermostat normal action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.33 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort4HighLimit1 OBJECT-TYPE Profile1: When this sersor higher than thermostat high limit, it will take a high limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.34 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort4HighLimitAction1 OBJECT-TYPE Profile1: Thermostat high limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.35 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort4LowLimit1 OBJECT-TYPE Profile1: When this sersor higher than thermostat low limit, it will take a normal limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.36 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort4LowLimitAction1 OBJECT-TYPE Profile1: Thermostat low limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.37 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort4NormalAction2 OBJECT-TYPE Profile2: Thermostat normal action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.38 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort4HighLimit2 OBJECT-TYPE Profile2: When this sersor higher than thermostat high limit, it will take a high limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.39 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort4HighLimitAction2 OBJECT-TYPE Profile2: Thermostat high limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.40 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort4LowLimit2 OBJECT-TYPE Profile2: When this sersor higher than thermostat low limit, it will take a normal limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.41 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort4LowLimitAction2 OBJECT-TYPE Profile2: Thermostat low limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.42 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort4EnableTime OBJECT-TYPE Time to enable on Thermostat | 1.3.6.1.4.1.3854.1.2.2.1.19.33.4.2.1.43 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort5 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5 | |||
| sensorProbeTemperatureArrayPort5Number OBJECT-TYPE The total number of port on the TemperatureArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.1 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort5Table OBJECT-TYPE This table contains the data for every Switch Sensor in the SensorArray. Each row in the table contains data for a different Switch Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2 | not-accessible | mandatory | |
| sensorProbeTemperatureArrayPort5Entry OBJECT-TYPE This is an entry in the sensorProbeTemperatureArrayPort5 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1 | not-accessible | mandatory | |
| sensorProbeTemperatureArrayPort5Index OBJECT-TYPE A unique value for each sensor TemperatureArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeTemperatureArrayPort5Description OBJECT-TYPE A Description of this sensor TemperatureArray | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort5Value OBJECT-TYPE The value in this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.3 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort5Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.4 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorProbeTemperatureArrayPort5Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeTemperatureArrayPort5GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort5HighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.7 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort5HighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.8 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort5LowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.9 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort5LowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.10 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort5Rearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.11 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort5DegreeType OBJECT-TYPE The degrees are in fahrenheit(0) or in celsius(1) | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.12 | INTEGER {fahr(0), celsius(1)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort5DegreeRaw OBJECT-TYPE The raw degree data from the temperature sensor, slightly higher resolution | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.14 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort5Offset OBJECT-TYPE Offset reading | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.15 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort5URL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.16 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort5OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.17 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort5DatacollectType OBJECT-TYPE Type of datacollect to collect. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.18 | INTEGER {average(1), highest(2), lowest(3)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort5ContTimeHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.19 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort5ContTimeHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.20 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort5ContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.21 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort5ContTimeLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.22 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort5ContTimeLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.23 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort5ContTimeSensorError OBJECT-TYPE Continuous time for this sensor to be in Sensor Error before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.24 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort5Calendar OBJECT-TYPE Enable or disable the calendar filtering working hours of sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.25 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort5Index OBJECT-TYPE A unique value for each sensor thermostat port. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.26 | INTEGER | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort5Description OBJECT-TYPE A Description of this sensor thermostat | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort5Value OBJECT-TYPE The value in this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.28 | INTEGER | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort5Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.29 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort5GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.30 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort5Mode OBJECT-TYPE To select the thermostat mode for working on time-bases(1) or normal(0). | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.31 | INTEGER {normal(0), time-bases(1)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort5RelayControlPort OBJECT-TYPE To select a relay port to be controled by this thermostat sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.32 | INTEGER | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort5NormalAction1 OBJECT-TYPE Profile1: Thermostat normal action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.33 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort5HighLimit1 OBJECT-TYPE Profile1: When this sersor higher than thermostat high limit, it will take a high limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.34 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort5HighLimitAction1 OBJECT-TYPE Profile1: Thermostat high limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.35 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort5LowLimit1 OBJECT-TYPE Profile1: When this sersor higher than thermostat low limit, it will take a normal limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.36 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort5LowLimitAction1 OBJECT-TYPE Profile1: Thermostat low limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.37 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort5NormalAction2 OBJECT-TYPE Profile2: Thermostat normal action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.38 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort5HighLimit2 OBJECT-TYPE Profile2: When this sersor higher than thermostat high limit, it will take a high limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.39 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort5HighLimitAction2 OBJECT-TYPE Profile2: Thermostat high limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.40 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort5LowLimit2 OBJECT-TYPE Profile2: When this sersor higher than thermostat low limit, it will take a normal limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.41 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort5LowLimitAction2 OBJECT-TYPE Profile2: Thermostat low limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.42 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort5EnableTime OBJECT-TYPE Time to enable on Thermostat | 1.3.6.1.4.1.3854.1.2.2.1.19.33.5.2.1.43 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort6 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6 | |||
| sensorProbeTemperatureArrayPort6Number OBJECT-TYPE The total number of port on the TemperatureArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.1 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort6Table OBJECT-TYPE This table contains the data for every Switch Sensor in the SensorArray. Each row in the table contains data for a different Switch Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2 | not-accessible | mandatory | |
| sensorProbeTemperatureArrayPort6Entry OBJECT-TYPE This is an entry in the sensorProbeTemperatureArrayPort6 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1 | not-accessible | mandatory | |
| sensorProbeTemperatureArrayPort6Index OBJECT-TYPE A unique value for each sensor TemperatureArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeTemperatureArrayPort6Description OBJECT-TYPE A Description of this sensor TemperatureArray | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort6Value OBJECT-TYPE The value in this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.3 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort6Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.4 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorProbeTemperatureArrayPort6Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeTemperatureArrayPort6GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort6HighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.7 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort6HighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.8 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort6LowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.9 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort6LowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.10 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort6Rearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.11 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort6DegreeType OBJECT-TYPE The degrees are in fahrenheit(0) or in celsius(1) | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.12 | INTEGER {fahr(0), celsius(1)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort6DegreeRaw OBJECT-TYPE The raw degree data from the temperature sensor, slightly higher resolution | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.14 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort6Offset OBJECT-TYPE Offset reading | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.15 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort6URL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.16 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort6OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.17 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort6DatacollectType OBJECT-TYPE Type of datacollect to collect. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.18 | INTEGER {average(1), highest(2), lowest(3)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort6ContTimeHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.19 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort6ContTimeHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.20 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort6ContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.21 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort6ContTimeLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.22 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort6ContTimeLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.23 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort6ContTimeSensorError OBJECT-TYPE Continuous time for this sensor to be in Sensor Error before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.24 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort6Calendar OBJECT-TYPE Enable or disable the calendar filtering working hours of sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.25 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort6Index OBJECT-TYPE A unique value for each sensor thermostat port. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.26 | INTEGER | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort6Description OBJECT-TYPE A Description of this sensor thermostat | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort6Value OBJECT-TYPE The value in this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.28 | INTEGER | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort6Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.29 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort6GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.30 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort6Mode OBJECT-TYPE To select the thermostat mode for working on time-bases(1) or normal(0). | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.31 | INTEGER {normal(0), time-bases(1)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort6RelayControlPort OBJECT-TYPE To select a relay port to be controled by this thermostat sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.32 | INTEGER | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort6NormalAction1 OBJECT-TYPE Profile1: Thermostat normal action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.33 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort6HighLimit1 OBJECT-TYPE Profile1: When this sersor higher than thermostat high limit, it will take a high limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.34 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort6HighLimitAction1 OBJECT-TYPE Profile1: Thermostat high limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.35 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort6LowLimit1 OBJECT-TYPE Profile1: When this sersor higher than thermostat low limit, it will take a normal limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.36 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort6LowLimitAction1 OBJECT-TYPE Profile1: Thermostat low limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.37 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort6NormalAction2 OBJECT-TYPE Profile2: Thermostat normal action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.38 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort6HighLimit2 OBJECT-TYPE Profile2: When this sersor higher than thermostat high limit, it will take a high limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.39 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort6HighLimitAction2 OBJECT-TYPE Profile2: Thermostat high limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.40 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort6LowLimit2 OBJECT-TYPE Profile2: When this sersor higher than thermostat low limit, it will take a normal limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.41 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort6LowLimitAction2 OBJECT-TYPE Profile2: Thermostat low limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.42 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort6EnableTime OBJECT-TYPE Time to enable on Thermostat | 1.3.6.1.4.1.3854.1.2.2.1.19.33.6.2.1.43 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort7 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7 | |||
| sensorProbeTemperatureArrayPort7Number OBJECT-TYPE The total number of port on the TemperatureArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.1 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort7Table OBJECT-TYPE This table contains the data for every Switch Sensor in the SensorArray. Each row in the table contains data for a different Switch Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2 | not-accessible | mandatory | |
| sensorProbeTemperatureArrayPort7Entry OBJECT-TYPE This is an entry in the sensorProbeTemperatureArrayPort7 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1 | not-accessible | mandatory | |
| sensorProbeTemperatureArrayPort7Index OBJECT-TYPE A unique value for each sensor TemperatureArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeTemperatureArrayPort7Description OBJECT-TYPE A Description of this sensor TemperatureArray | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort7Value OBJECT-TYPE The value in this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.3 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort7Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.4 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorProbeTemperatureArrayPort7Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeTemperatureArrayPort7GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort7HighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.7 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort7HighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.8 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort7LowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.9 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort7LowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.10 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort7Rearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.11 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort7DegreeType OBJECT-TYPE The degrees are in fahrenheit(0) or in celsius(1) | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.12 | INTEGER {fahr(0), celsius(1)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort7DegreeRaw OBJECT-TYPE The raw degree data from the temperature sensor, slightly higher resolution | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.14 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort7Offset OBJECT-TYPE Offset reading | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.15 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort7URL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.16 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort7OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.17 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort7DatacollectType OBJECT-TYPE Type of datacollect to collect. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.18 | INTEGER {average(1), highest(2), lowest(3)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort7ContTimeHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.19 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort7ContTimeHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.20 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort7ContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.21 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort7ContTimeLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.22 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort7ContTimeLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.23 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort7ContTimeSensorError OBJECT-TYPE Continuous time for this sensor to be in Sensor Error before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.24 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort7Calendar OBJECT-TYPE Enable or disable the calendar filtering working hours of sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.25 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort7Index OBJECT-TYPE A unique value for each sensor thermostat port. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.26 | INTEGER | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort7Description OBJECT-TYPE A Description of this sensor thermostat | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort7Value OBJECT-TYPE The value in this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.28 | INTEGER | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort7Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.29 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort7GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.30 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort7Mode OBJECT-TYPE To select the thermostat mode for working on time-bases(1) or normal(0). | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.31 | INTEGER {normal(0), time-bases(1)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort7RelayControlPort OBJECT-TYPE To select a relay port to be controled by this thermostat sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.32 | INTEGER | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort7NormalAction1 OBJECT-TYPE Profile1: Thermostat normal action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.33 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort7HighLimit1 OBJECT-TYPE Profile1: When this sersor higher than thermostat high limit, it will take a high limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.34 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort7HighLimitAction1 OBJECT-TYPE Profile1: Thermostat high limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.35 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort7LowLimit1 OBJECT-TYPE Profile1: When this sersor higher than thermostat low limit, it will take a normal limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.36 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort7LowLimitAction1 OBJECT-TYPE Profile1: Thermostat low limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.37 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort7NormalAction2 OBJECT-TYPE Profile2: Thermostat normal action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.38 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort7HighLimit2 OBJECT-TYPE Profile2: When this sersor higher than thermostat high limit, it will take a high limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.39 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort7HighLimitAction2 OBJECT-TYPE Profile2: Thermostat high limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.40 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort7LowLimit2 OBJECT-TYPE Profile2: When this sersor higher than thermostat low limit, it will take a normal limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.41 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort7LowLimitAction2 OBJECT-TYPE Profile2: Thermostat low limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.42 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort7EnableTime OBJECT-TYPE Time to enable on Thermostat | 1.3.6.1.4.1.3854.1.2.2.1.19.33.7.2.1.43 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort8 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8 | |||
| sensorProbeTemperatureArrayPort8Number OBJECT-TYPE The total number of port on the TemperatureArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.1 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort8Table OBJECT-TYPE This table contains the data for every Switch Sensor in the SensorArray. Each row in the table contains data for a different Switch Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2 | not-accessible | mandatory | |
| sensorProbeTemperatureArrayPort8Entry OBJECT-TYPE This is an entry in the sensorProbeTemperatureArrayPort8 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1 | not-accessible | mandatory | |
| sensorProbeTemperatureArrayPort8Index OBJECT-TYPE A unique value for each sensor TemperatureArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeTemperatureArrayPort8Description OBJECT-TYPE A Description of this sensor TemperatureArray | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort8Value OBJECT-TYPE The value in this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.3 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort8Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.4 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorProbeTemperatureArrayPort8Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeTemperatureArrayPort8GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort8HighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.7 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort8HighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.8 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort8LowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.9 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort8LowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.10 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort8Rearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.11 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort8DegreeType OBJECT-TYPE The degrees are in fahrenheit(0) or in celsius(1) | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.12 | INTEGER {fahr(0), celsius(1)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort8DegreeRaw OBJECT-TYPE The raw degree data from the temperature sensor, slightly higher resolution | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.14 | INTEGER | read-only | mandatory |
| sensorProbeTemperatureArrayPort8Offset OBJECT-TYPE Offset reading | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.15 | INTEGER | read-write | mandatory |
| sensorProbeTemperatureArrayPort8URL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.16 | DisplayString | read-write | mandatory |
| sensorProbeTemperatureArrayPort8OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.17 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort8DatacollectType OBJECT-TYPE Type of datacollect to collect. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.18 | INTEGER {average(1), highest(2), lowest(3)} | read-write | mandatory |
| sensorProbeTemperatureArrayPort8ContTimeHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.19 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort8ContTimeHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.20 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort8ContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.21 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort8ContTimeLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.22 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort8ContTimeLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.23 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort8ContTimeSensorError OBJECT-TYPE Continuous time for this sensor to be in Sensor Error before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.24 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeTemperatureArrayPort8Calendar OBJECT-TYPE Enable or disable the calendar filtering working hours of sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.25 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort8Index OBJECT-TYPE A unique value for each sensor thermostat port. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.26 | INTEGER | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort8Description OBJECT-TYPE A Description of this sensor thermostat | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort8Value OBJECT-TYPE The value in this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.28 | INTEGER | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort8Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.29 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeThermostatTemperatureArrayPort8GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.30 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort8Mode OBJECT-TYPE To select the thermostat mode for working on time-bases(1) or normal(0). | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.31 | INTEGER {normal(0), time-bases(1)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort8RelayControlPort OBJECT-TYPE To select a relay port to be controled by this thermostat sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.32 | INTEGER | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort8NormalAction1 OBJECT-TYPE Profile1: Thermostat normal action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.33 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort8HighLimit1 OBJECT-TYPE Profile1: When this sersor higher than thermostat high limit, it will take a high limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.34 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort8HighLimitAction1 OBJECT-TYPE Profile1: Thermostat high limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.35 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort8LowLimit1 OBJECT-TYPE Profile1: When this sersor higher than thermostat low limit, it will take a normal limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.36 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort8LowLimitAction1 OBJECT-TYPE Profile1: Thermostat low limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.37 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort8NormalAction2 OBJECT-TYPE Profile2: Thermostat normal action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.38 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort8HighLimit2 OBJECT-TYPE Profile2: When this sersor higher than thermostat high limit, it will take a high limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.39 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort8HighLimitAction2 OBJECT-TYPE Profile2: Thermostat high limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.40 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort8LowLimit2 OBJECT-TYPE Profile2: When this sersor higher than thermostat low limit, it will take a normal limit action. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.41 | INTEGER (-40..167) | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort8LowLimitAction2 OBJECT-TYPE Profile2: Thermostat low limit action for controlling a relay sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.42 | INTEGER {turn-on(0), turn-off(1), no-change(2)} | read-write | mandatory |
| sensorProbeThermostatTemperatureArrayPort8EnableTime OBJECT-TYPE Time to enable on Thermostat | 1.3.6.1.4.1.3854.1.2.2.1.19.33.8.2.1.43 | DisplayString | read-write | mandatory |
| sensorProbeNoCameraSensor OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.34 | |||
| sensorProbeNoCameraSensorNumber OBJECT-TYPE The total number of no camera sensor port. | 1.3.6.1.4.1.3854.1.2.2.1.19.34.1 | INTEGER | read-only | mandatory |
| sensorProbeNoCameraSensorTable OBJECT-TYPE This table contains the data for every no camera Sensor. Each row in the table contains data for a different NoCamera Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.34.2 | not-accessible | mandatory | |
| sensorProbeNoCameraSensorEntry OBJECT-TYPE This is an entry in the sensorProbeNoCameraSensorEntry Table | 1.3.6.1.4.1.3854.1.2.2.1.19.34.2.1 | not-accessible | mandatory | |
| sensorProbeNoCameraSensorIndex OBJECT-TYPE A unique value for each no camera sensor port. | 1.3.6.1.4.1.3854.1.2.2.1.19.34.2.1.1 | INTEGER (0..3) | read-only | mandatory |
| sensorProbeNoCameraDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.34.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeNoCameraStatus OBJECT-TYPE The current status of this Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.34.2.1.4 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorProbeNoCameraOnline OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.34.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeNoCameraGoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.34.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeNoCameraContTimeHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.34.2.1.7 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeNoCameraContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.34.2.1.8 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeNoCameraCalendar OBJECT-TYPE Enable or disable the calendar filtering working hours of sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.34.2.1.9 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeSoftMotionSensor OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.35 | |||
| sensorProbeSoftMotionSensorNumber OBJECT-TYPE The total number of SoftMotionSensor port. | 1.3.6.1.4.1.3854.1.2.2.1.19.35.1 | INTEGER | read-only | mandatory |
| sensorProbeSoftMotionSensorTable OBJECT-TYPE This table contains the data for every SoftMotion Sensor. Each row in the table contains data for a different SoftMotion Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.35.2 | not-accessible | mandatory | |
| sensorProbeSoftMotionSensorEntry OBJECT-TYPE This is an entry in the sensorProbeSoftMotionSensorEntry Table | 1.3.6.1.4.1.3854.1.2.2.1.19.35.2.1 | not-accessible | mandatory | |
| sensorProbeSoftMotionSensorIndex OBJECT-TYPE A unique value for each soft motion sensor port. | 1.3.6.1.4.1.3854.1.2.2.1.19.35.2.1.1 | INTEGER (0..3) | read-only | mandatory |
| sensorProbeSoftMotionDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.35.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeSoftMotionStatus OBJECT-TYPE The current status of this Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.35.2.1.4 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorProbeSoftMotionOnline OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.35.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeSoftMotionGoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.35.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeSoftMotionPercentSensitivity OBJECT-TYPE The percent of sensitivity uses for setting the sentisitivity of motion detector. | 1.3.6.1.4.1.3854.1.2.2.1.19.35.2.1.7 | INTEGER (0..100) | read-write | mandatory |
| sensorProbeSoftMotionURL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.35.2.1.8 | DisplayString | read-write | mandatory |
| sensorProbeSoftMotionOpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.35.2.1.9 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeSoftMotionContTimeHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.35.2.1.10 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeSoftMotionContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.35.2.1.11 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeSoftMotionCalendar OBJECT-TYPE Enable or disable the calendar filtering working hours of sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.35.2.1.12 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeSoftMotionMask OBJECT-TYPE Mask of enable or disable of SoftMotion. | 1.3.6.1.4.1.3854.1.2.2.1.19.35.2.1.13 | INTEGER (0..33554431) | read-write | mandatory |
| sensorProbeSoundDetectorSensor OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.36 | |||
| sensorProbeSoundDetectorSensorNumber OBJECT-TYPE The total number of SoundDetectorSensor port. | 1.3.6.1.4.1.3854.1.2.2.1.19.36.1 | INTEGER | read-only | mandatory |
| sensorProbeSoundDetectorSensorTable OBJECT-TYPE This table contains the data for every SoundDetectorSensor Sensor. Each row in the table contains data for a different SoundDetectorSensor Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2 | not-accessible | mandatory | |
| sensorProbeSoundDetectorSensorEntry OBJECT-TYPE This is an entry in the sensorProbeSoundDetectorSensorEntry Table | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1 | not-accessible | mandatory | |
| sensorProbeSoundDetectorIndex OBJECT-TYPE A unique value for each sound detector sensor port. | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.1 | INTEGER (0) | read-only | mandatory |
| sensorProbeSoundDetectorDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeSoundDetectorValue OBJECT-TYPE The value in this sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.3 | INTEGER | read-only | mandatory |
| sensorProbeSoundDetectorStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.4 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorProbeSoundDetectorOnline OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeSoundDetectorGoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeSoundDetectorHighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.7 | INTEGER | read-write | mandatory |
| sensorProbeSoundDetectorHighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.8 | INTEGER | read-write | mandatory |
| sensorProbeSoundDetectorLowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.9 | INTEGER | read-write | mandatory |
| sensorProbeSoundDetectorLowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.10 | INTEGER | read-write | mandatory |
| sensorProbeSoundDetectorRearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down Rearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.11 | INTEGER | read-write | mandatory |
| sensorProbeSoundDetectorRecordingSource OBJECT-TYPE To select a recording source being in internal microphone(0) or in line-in(1). | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.12 | INTEGER {internal-mic(0), line-in(1)} | read-write | mandatory |
| sensorProbeSoundDetectorMicBoost OBJECT-TYPE Enable or disable a microphone boost(+20 db). | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.13 | INTEGER {off(0), on(1)} | read-write | mandatory |
| sensorProbeSoundDetectorMicSensitivity OBJECT-TYPE The sensitivity of microphone to detect sound. | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.14 | INTEGER {i0(0), i20(20), i40(40), i60(60), i80(80), i100(100)} | read-write | mandatory |
| sensorProbeSoundDetectorPulseLength OBJECT-TYPE Continuous time for detecting before changing status. | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.15 | INTEGER | read-write | mandatory |
| sensorProbeSoundDetectorURL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.16 | DisplayString | read-write | mandatory |
| sensorProbeSoundDetectorOpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.17 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeSoundDetectorDatacollectType OBJECT-TYPE Type of datacollect to collect. | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.18 | INTEGER {average(1), highest(2), lowest(3)} | read-write | mandatory |
| sensorProbeSoundDetectorContTimeHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.19 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeSoundDetectorContTimeHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.20 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeSoundDetectorContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.21 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeSoundDetectorContTimeLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.22 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeSoundDetectorContTimeLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.23 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeSoundDetectorContTimeSensorError OBJECT-TYPE Continuous time for this sensor to be in Sensor Error before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.24 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeSoundDetectorCalendar OBJECT-TYPE Enable or disable the calendar filtering working hours of sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.36.2.1.25 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeDrycontactArraySensor OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.37 | |||
| sensorProbeDrycontactArrayPort1 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.37.1 | |||
| sensorProbeDrycontactArrayPort1Number OBJECT-TYPE The total number of port on the DrycontactArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.1.1 | INTEGER | read-only | mandatory |
| sensorProbeDrycontactArrayPort1Table OBJECT-TYPE This table contains the data for every Drycontact Sensor in the SensorArray. Each row in the table contains data for a different Drycontact Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.1.2 | not-accessible | mandatory | |
| sensorProbeDrycontactArrayPort1Entry OBJECT-TYPE This is an entry in the sensorProbeDrycontactArrayPort1 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.37.1.2.1 | not-accessible | mandatory | |
| sensorProbeDrycontactArrayPort1Index OBJECT-TYPE A unique value for each sensor DrycontactArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.1.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeDrycontactArrayPort1Description OBJECT-TYPE A Description of this sensor DrycontactArray | 1.3.6.1.4.1.3854.1.2.2.1.19.37.1.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort1Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.37.1.2.1.4 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorProbeDrycontactArrayPort1Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.37.1.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeDrycontactArrayPort1GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.37.1.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort1NormalState OBJECT-TYPE The normal state of DrycontactArray | 1.3.6.1.4.1.3854.1.2.2.1.19.37.1.2.1.7 | INTEGER {closed(0), open(1)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort1Direction OBJECT-TYPE To set a drycontact to input enter 0. To set a switch to output enter 1 | 1.3.6.1.4.1.3854.1.2.2.1.19.37.1.2.1.8 | INTEGER {input(0), output(1)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort1ContTimeCritical OBJECT-TYPE Continuous time for this sensor to be in Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.1.2.1.9 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeDrycontactArrayPort1ContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.1.2.1.10 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeDrycontactArrayPort1ManualOutputCycleTime OBJECT-TYPE Drycontact output toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.1.2.1.24 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeDrycontactArrayPort1ManualOutputAction OBJECT-TYPE Control the drycontact output manualy | 1.3.6.1.4.1.3854.1.2.2.1.19.37.1.2.1.25 | INTEGER {allow-sensor-control(1), turn-on(3), turn-off(4), cycle-Off-On-Off(7), cycle-On-Off-On(8)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort1OutputDescOn OBJECT-TYPE Description of Drycontact output On | 1.3.6.1.4.1.3854.1.2.2.1.19.37.1.2.1.26 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort1OutputDescOff OBJECT-TYPE Description of Drycontact output Off | 1.3.6.1.4.1.3854.1.2.2.1.19.37.1.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort1URL OBJECT-TYPE Sersor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.1.2.1.28 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort1OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.1.2.1.29 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort1ControlMode OBJECT-TYPE Control Mode used for selecting the mode to control a drycontact output. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.1.2.1.30 | INTEGER {manual-control(0), notification-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort2 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.37.2 | |||
| sensorProbeDrycontactArrayPort2Number OBJECT-TYPE The total number of port on the DrycontactArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.2.1 | INTEGER | read-only | mandatory |
| sensorProbeDrycontactArrayPort2Table OBJECT-TYPE This table contains the data for every Drycontact Sensor in the SensorArray. Each row in the table contains data for a different Drycontact Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.2.2 | not-accessible | mandatory | |
| sensorProbeDrycontactArrayPort2Entry OBJECT-TYPE This is an entry in the sensorProbeDrycontactArrayPort2 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.37.2.2.1 | not-accessible | mandatory | |
| sensorProbeDrycontactArrayPort2Index OBJECT-TYPE A unique value for each sensor DrycontactArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.2.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeDrycontactArrayPort2Description OBJECT-TYPE A Description of this sensor DrycontactArray | 1.3.6.1.4.1.3854.1.2.2.1.19.37.2.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort2Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.37.2.2.1.4 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorProbeDrycontactArrayPort2Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.37.2.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeDrycontactArrayPort2GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.37.2.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort2NormalState OBJECT-TYPE The normal state of DrycontactArray | 1.3.6.1.4.1.3854.1.2.2.1.19.37.2.2.1.7 | INTEGER {closed(0), open(1)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort2Direction OBJECT-TYPE To set a drycontact to input enter 0. To set a switch to output enter 1 | 1.3.6.1.4.1.3854.1.2.2.1.19.37.2.2.1.8 | INTEGER {input(0), output(1)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort2ContTimeCritical OBJECT-TYPE Continuous time for this sensor to be in Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.2.2.1.9 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeDrycontactArrayPort2ContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.2.2.1.10 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeDrycontactArrayPort2ManualOutputCycleTime OBJECT-TYPE Drycontact toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.2.2.1.24 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeDrycontactArrayPort2ManualOutputAction OBJECT-TYPE Control the Drycontact output manualy | 1.3.6.1.4.1.3854.1.2.2.1.19.37.2.2.1.25 | INTEGER {allow-sensor-control(1), turn-on(3), turn-off(4), cycle-Off-On-Off(7), cycle-On-Off-On(8)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort2OutputDescOn OBJECT-TYPE Description of Drycontact output On | 1.3.6.1.4.1.3854.1.2.2.1.19.37.2.2.1.26 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort2OutputDescOff OBJECT-TYPE Description of Drycontact output Off | 1.3.6.1.4.1.3854.1.2.2.1.19.37.2.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort2URL OBJECT-TYPE Sensor URL link | 1.3.6.1.4.1.3854.1.2.2.1.19.37.2.2.1.28 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort2OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.2.2.1.29 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort2ControlMode OBJECT-TYPE Control Mode used for selecting the mode to control a Drycontact output. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.2.2.1.30 | INTEGER {manual-control(0), notification-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort3 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.37.3 | |||
| sensorProbeDrycontactArrayPort3Number OBJECT-TYPE The total number of port on the DrycontactArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.3.1 | INTEGER | read-only | mandatory |
| sensorProbeDrycontactArrayPort3Table OBJECT-TYPE This table contains the data for every Drycontact Sensor in the SensorArray. Each row in the table contains data for a different Drycontact Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.3.2 | not-accessible | mandatory | |
| sensorProbeDrycontactArrayPort3Entry OBJECT-TYPE This is an entry in the sensorProbeDrycontactArrayPort3 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.37.3.2.1 | not-accessible | mandatory | |
| sensorProbeDrycontactArrayPort3Index OBJECT-TYPE A unique value for each sensor DrycontactArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.3.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeDrycontactArrayPort3Description OBJECT-TYPE A Description of this sensor DrycontactArray | 1.3.6.1.4.1.3854.1.2.2.1.19.37.3.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort3Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.37.3.2.1.4 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorProbeDrycontactArrayPort3Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.37.3.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeDrycontactArrayPort3GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.37.3.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort3NormalState OBJECT-TYPE The normal state of DrycontactArray | 1.3.6.1.4.1.3854.1.2.2.1.19.37.3.2.1.7 | INTEGER {closed(0), open(1)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort3Direction OBJECT-TYPE To set a drycontact to input enter 0. To set a switch to output enter 1 | 1.3.6.1.4.1.3854.1.2.2.1.19.37.3.2.1.8 | INTEGER {input(0), output(1)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort3ContTimeCritical OBJECT-TYPE Continuous time for this sensor to be in Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.3.2.1.9 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeDrycontactArrayPort3ContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.3.2.1.10 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeDrycontactArrayPort3ManualOutputCycleTime OBJECT-TYPE Drycontact toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.3.2.1.24 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeDrycontactArrayPort3ManualOutputAction OBJECT-TYPE Control the Drycontact output manualy | 1.3.6.1.4.1.3854.1.2.2.1.19.37.3.2.1.25 | INTEGER {allow-sensor-control(1), turn-on(3), turn-off(4), cycle-Off-On-Off(7), cycle-On-Off-On(8)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort3OutputDescOn OBJECT-TYPE Description of Drycontact output On | 1.3.6.1.4.1.3854.1.2.2.1.19.37.3.2.1.26 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort3OutputDescOff OBJECT-TYPE Description of Drycontact output Off | 1.3.6.1.4.1.3854.1.2.2.1.19.37.3.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort3URL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.3.2.1.28 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort3OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.3.2.1.29 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort3ControlMode OBJECT-TYPE Control Mode used for selecting the mode to control a Drycontact output. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.3.2.1.30 | INTEGER {manual-control(0), notification-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort4 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.37.4 | |||
| sensorProbeDrycontactArrayPort4Number OBJECT-TYPE The total number of port on the DrycontactArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.4.1 | INTEGER | read-only | mandatory |
| sensorProbeDrycontactArrayPort4Table OBJECT-TYPE This table contains the data for every Drycontact Sensor in the SensorArray. Each row in the table contains data for a different Drycontact Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.4.2 | not-accessible | mandatory | |
| sensorProbeDrycontactArrayPort4Entry OBJECT-TYPE This is an entry in the sensorProbeDrycontactArrayPort4 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.37.4.2.1 | not-accessible | mandatory | |
| sensorProbeDrycontactArrayPort4Index OBJECT-TYPE A unique value for each sensor DrycontactArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.4.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeDrycontactArrayPort4Description OBJECT-TYPE A Description of this sensor DrycontactArray | 1.3.6.1.4.1.3854.1.2.2.1.19.37.4.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort4Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.37.4.2.1.4 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorProbeDrycontactArrayPort4Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.37.4.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeDrycontactArrayPort4GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.37.4.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort4NormalState OBJECT-TYPE The normal state of DrycontactArray | 1.3.6.1.4.1.3854.1.2.2.1.19.37.4.2.1.7 | INTEGER {closed(0), open(1)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort4Direction OBJECT-TYPE To set a drycontact to input enter 0. To set a switch to output enter 1 | 1.3.6.1.4.1.3854.1.2.2.1.19.37.4.2.1.8 | INTEGER {input(0), output(1)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort4ContTimeCritical OBJECT-TYPE Continuous time for this sensor to be in Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.4.2.1.9 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeDrycontactArrayPort4ContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.4.2.1.10 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeDrycontactArrayPort4ManualOutputCycleTime OBJECT-TYPE Drycontact toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.4.2.1.24 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeDrycontactArrayPort4ManualOutputAction OBJECT-TYPE Control the Drycontact output manualy | 1.3.6.1.4.1.3854.1.2.2.1.19.37.4.2.1.25 | INTEGER {allow-sensor-control(1), turn-on(3), turn-off(4), cycle-Off-On-Off(7), cycle-On-Off-On(8)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort4OutputDescOn OBJECT-TYPE Description of Drycontact output On | 1.3.6.1.4.1.3854.1.2.2.1.19.37.4.2.1.26 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort4OutputDescOff OBJECT-TYPE Description of Drycontact output Off | 1.3.6.1.4.1.3854.1.2.2.1.19.37.4.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort4URL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.4.2.1.28 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort4OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.4.2.1.29 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort4ControlMode OBJECT-TYPE Control Mode used for selecting the mode to control a Drycontact output. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.4.2.1.30 | INTEGER {manual-control(0), notification-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort5 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.37.5 | |||
| sensorProbeDrycontactArrayPort5Number OBJECT-TYPE The total number of port on the DrycontactArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.5.1 | INTEGER | read-only | mandatory |
| sensorProbeDrycontactArrayPort5Table OBJECT-TYPE This table contains the data for every Drycontact Sensor in the SensorArray. Each row in the table contains data for a different Drycontact Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.5.2 | not-accessible | mandatory | |
| sensorProbeDrycontactArrayPort5Entry OBJECT-TYPE This is an entry in the sensorProbeDrycontactArrayPort5 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.37.5.2.1 | not-accessible | mandatory | |
| sensorProbeDrycontactArrayPort5Index OBJECT-TYPE A unique value for each sensor DrycontactArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.5.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeDrycontactArrayPort5Description OBJECT-TYPE A Description of this sensor DrycontactArray | 1.3.6.1.4.1.3854.1.2.2.1.19.37.5.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort5Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.37.5.2.1.4 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorProbeDrycontactArrayPort5Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.37.5.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeDrycontactArrayPort5GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.37.5.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort5NormalState OBJECT-TYPE The normal state of DrycontactArray | 1.3.6.1.4.1.3854.1.2.2.1.19.37.5.2.1.7 | INTEGER {closed(0), open(1)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort5Direction OBJECT-TYPE To set a drycontact to input enter 0. To set a switch to output enter 1 | 1.3.6.1.4.1.3854.1.2.2.1.19.37.5.2.1.8 | INTEGER {input(0), output(1)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort5ContTimeCritical OBJECT-TYPE Continuous time for this sensor to be in Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.5.2.1.9 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeDrycontactArrayPort5ContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.5.2.1.10 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeDrycontactArrayPort5ManualOutputCycleTime OBJECT-TYPE Drycontact toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.5.2.1.24 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeDrycontactArrayPort5ManualOutputAction OBJECT-TYPE Control the Drycontact output manualy | 1.3.6.1.4.1.3854.1.2.2.1.19.37.5.2.1.25 | INTEGER {allow-sensor-control(1), turn-on(3), turn-off(4), cycle-Off-On-Off(7), cycle-On-Off-On(8)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort5OutputDescOn OBJECT-TYPE Description of Drycontact output On | 1.3.6.1.4.1.3854.1.2.2.1.19.37.5.2.1.26 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort5OutputDescOff OBJECT-TYPE Description of Drycontact output Off | 1.3.6.1.4.1.3854.1.2.2.1.19.37.5.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort5URL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.5.2.1.28 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort5OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.5.2.1.29 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort5ControlMode OBJECT-TYPE Control Mode used for selecting the mode to control a Drycontact output. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.5.2.1.30 | INTEGER {manual-control(0), notification-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort6 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.37.6 | |||
| sensorProbeDrycontactArrayPort6Number OBJECT-TYPE The total number of port on the DrycontactArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.6.1 | INTEGER | read-only | mandatory |
| sensorProbeDrycontactArrayPort6Table OBJECT-TYPE This table contains the data for every Drycontact Sensor in the SensorArray. Each row in the table contains data for a different Drycontact Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.6.2 | not-accessible | mandatory | |
| sensorProbeDrycontactArrayPort6Entry OBJECT-TYPE This is an entry in the sensorProbeDrycontactArrayPort6 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.37.6.2.1 | not-accessible | mandatory | |
| sensorProbeDrycontactArrayPort6Index OBJECT-TYPE A unique value for each sensor DrycontactArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.6.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeDrycontactArrayPort6Description OBJECT-TYPE A Description of this sensor DrycontactArray | 1.3.6.1.4.1.3854.1.2.2.1.19.37.6.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort6Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.37.6.2.1.4 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorProbeDrycontactArrayPort6Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.37.6.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeDrycontactArrayPort6GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.37.6.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort6NormalState OBJECT-TYPE The normal state of DrycontactArray | 1.3.6.1.4.1.3854.1.2.2.1.19.37.6.2.1.7 | INTEGER {closed(0), open(1)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort6Direction OBJECT-TYPE To set a drycontact to input enter 0. To set a switch to output enter 1 | 1.3.6.1.4.1.3854.1.2.2.1.19.37.6.2.1.8 | INTEGER {input(0), output(1)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort6ContTimeCritical OBJECT-TYPE Continuous time for this sensor to be in Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.6.2.1.9 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeDrycontactArrayPort6ContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.6.2.1.10 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeDrycontactArrayPort6ManualOutputCycleTime OBJECT-TYPE Drycontact toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.6.2.1.24 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeDrycontactArrayPort6ManualOutputAction OBJECT-TYPE Control the Drycontact output manualy | 1.3.6.1.4.1.3854.1.2.2.1.19.37.6.2.1.25 | INTEGER {allow-sensor-control(1), turn-on(3), turn-off(4), cycle-Off-On-Off(7), cycle-On-Off-On(8)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort6OutputDescOn OBJECT-TYPE Description of Drycontact output On | 1.3.6.1.4.1.3854.1.2.2.1.19.37.6.2.1.26 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort6OutputDescOff OBJECT-TYPE Description of Drycontact output Off | 1.3.6.1.4.1.3854.1.2.2.1.19.37.6.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort6URL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.6.2.1.28 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort6OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.6.2.1.29 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort6ControlMode OBJECT-TYPE Control Mode used for selecting the mode to control a Drycontact output. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.6.2.1.30 | INTEGER {manual-control(0), notification-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort7 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.37.7 | |||
| sensorProbeDrycontactArrayPort7Number OBJECT-TYPE The total number of port on the DrycontactArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.7.1 | INTEGER | read-only | mandatory |
| sensorProbeDrycontactArrayPort7Table OBJECT-TYPE This table contains the data for every Drycontact Sensor in the SensorArray. Each row in the table contains data for a different Drycontact Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.7.2 | not-accessible | mandatory | |
| sensorProbeDrycontactArrayPort7Entry OBJECT-TYPE This is an entry in the sensorProbeDrycontactArrayPort7 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.37.7.2.1 | not-accessible | mandatory | |
| sensorProbeDrycontactArrayPort7Index OBJECT-TYPE A unique value for each sensor DrycontactArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.7.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeDrycontactArrayPort7Description OBJECT-TYPE A Description of this sensor DrycontactArray | 1.3.6.1.4.1.3854.1.2.2.1.19.37.7.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort7Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.37.7.2.1.4 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorProbeDrycontactArrayPort7Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.37.7.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeDrycontactArrayPort7GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.37.7.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort7NormalState OBJECT-TYPE The normal state of DrycontactArray | 1.3.6.1.4.1.3854.1.2.2.1.19.37.7.2.1.7 | INTEGER {closed(0), open(1)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort7Direction OBJECT-TYPE To set a drycontact to input enter 0. To set a switch to output enter 1 | 1.3.6.1.4.1.3854.1.2.2.1.19.37.7.2.1.8 | INTEGER {input(0), output(1)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort7ContTimeCritical OBJECT-TYPE Continuous time for this sensor to be in Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.7.2.1.9 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeDrycontactArrayPort7ContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.7.2.1.10 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeDrycontactArrayPort7ManualOutputCycleTime OBJECT-TYPE Drycontact toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.7.2.1.24 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeDrycontactArrayPort7ManualOutputAction OBJECT-TYPE Control the Drycontact output manualy | 1.3.6.1.4.1.3854.1.2.2.1.19.37.7.2.1.25 | INTEGER {allow-sensor-control(1), turn-on(3), turn-off(4), cycle-Off-On-Off(7), cycle-On-Off-On(8)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort7OutputDescOn OBJECT-TYPE Description of Drycontact output On | 1.3.6.1.4.1.3854.1.2.2.1.19.37.7.2.1.26 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort7OutputDescOff OBJECT-TYPE Description of Drycontact output Off | 1.3.6.1.4.1.3854.1.2.2.1.19.37.7.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort7URL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.7.2.1.28 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort7OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.7.2.1.29 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort7ControlMode OBJECT-TYPE Control Mode used for selecting the mode to control a Drycontact output. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.7.2.1.30 | INTEGER {manual-control(0), notification-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort8 OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.19.37.8 | |||
| sensorProbeDrycontactArrayPort8Number OBJECT-TYPE The total number of port on the DrycontactArray. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.8.1 | INTEGER | read-only | mandatory |
| sensorProbeDrycontactArrayPort8Table OBJECT-TYPE This table contains the data for every Drycontact Sensor in the SensorArray. Each row in the table contains data for a different Drycontact Sensor. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.8.2 | not-accessible | mandatory | |
| sensorProbeDrycontactArrayPort8Entry OBJECT-TYPE This is an entry in the sensorProbeDrycontactArrayPort8 Table | 1.3.6.1.4.1.3854.1.2.2.1.19.37.8.2.1 | not-accessible | mandatory | |
| sensorProbeDrycontactArrayPort8Index OBJECT-TYPE A unique value for each sensor DrycontactArray port. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.8.2.1.1 | INTEGER (0..7) | read-only | mandatory |
| sensorProbeDrycontactArrayPort8Description OBJECT-TYPE A Description of this sensor DrycontactArray | 1.3.6.1.4.1.3854.1.2.2.1.19.37.8.2.1.2 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort8Status OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.1.2.2.1.19.37.8.2.1.4 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorProbeDrycontactArrayPort8Online OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.1.2.2.1.19.37.8.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeDrycontactArrayPort8GoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.19.37.8.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort8NormalState OBJECT-TYPE The normal state of DrycontactArray | 1.3.6.1.4.1.3854.1.2.2.1.19.37.8.2.1.7 | INTEGER {closed(0), open(1)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort8Direction OBJECT-TYPE To set a drycontact to input enter 0. To set a switch to output enter 1 | 1.3.6.1.4.1.3854.1.2.2.1.19.37.8.2.1.8 | INTEGER {input(0), output(1)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort8ContTimeCritical OBJECT-TYPE Continuous time for this sensor to be in Critical before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.8.2.1.9 | INTEGER (0..65534) | read-write | mandatory |
| sensorProbeDrycontactArrayPort8ContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.8.2.1.10 | INTEGER (0..65535) | read-write | mandatory |
| sensorProbeDrycontactArrayPort8ManualOutputCycleTime OBJECT-TYPE Drycontact toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.8.2.1.24 | INTEGER (1..255) | read-write | mandatory |
| sensorProbeDrycontactArrayPort8ManualOutputAction OBJECT-TYPE Control the Drycontact output manualy | 1.3.6.1.4.1.3854.1.2.2.1.19.37.8.2.1.25 | INTEGER {allow-sensor-control(1), turn-on(3), turn-off(4), cycle-Off-On-Off(7), cycle-On-Off-On(8)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort8OutputDescOn OBJECT-TYPE Description of Drycontact output On | 1.3.6.1.4.1.3854.1.2.2.1.19.37.8.2.1.26 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort8OutputDescOff OBJECT-TYPE Description of Drycontact output Off | 1.3.6.1.4.1.3854.1.2.2.1.19.37.8.2.1.27 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort8URL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.8.2.1.28 | DisplayString | read-write | mandatory |
| sensorProbeDrycontactArrayPort8OpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.8.2.1.29 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| sensorProbeDrycontactArrayPort8ControlMode OBJECT-TYPE Control Mode used for selecting the mode to control a Drycontact output. | 1.3.6.1.4.1.3854.1.2.2.1.19.37.8.2.1.30 | INTEGER {manual-control(0), notification-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| sensorProbeDebug OBJECT-TYPE SP only: Turn on or off debug messages | 1.3.6.1.4.1.3854.1.2.2.1.20 | INTEGER {off(0), on(1)} | read-write | mandatory |
| sensorProbeTrapResend OBJECT-TYPE If traps for Warning or Error should be resent. Traps for Normal status are sent once | 1.3.6.1.4.1.3854.1.2.2.1.22 | INTEGER {off(0), on(1)} | read-write | mandatory |
| sensorProbeTrapResendInterval OBJECT-TYPE How often to resend mail or Traps. Enter the number of seconds from 15 to 65535. Mail for WARNING and ERROR are resent at this interval. Traps for Normal status are sent once | 1.3.6.1.4.1.3854.1.2.2.1.23 | INTEGER | read-write | mandatory |
| sensorProbeSendTraps OBJECT-TYPE Turn on or off the sending of traps | 1.3.6.1.4.1.3854.1.2.2.1.24 | INTEGER {on(1), off(2)} | read-write | mandatory |
| sensorProbeTrapDestination OBJECT-TYPE The IP address of the trap destination | 1.3.6.1.4.1.3854.1.2.2.1.25 | IpAddress | read-write | mandatory |
| sensorProbeTrapCommunity OBJECT-TYPE The community string of the trap destination | 1.3.6.1.4.1.3854.1.2.2.1.26 | DisplayString | read-write | mandatory |
| sensorProbeDefaultGateway OBJECT-TYPE If the destination is on another network, enter the IP address of the router | 1.3.6.1.4.1.3854.1.2.2.1.27 | IpAddress | read-write | mandatory |
| sensorProbeSubnetMask OBJECT-TYPE If the trap destination uses the default gateway | 1.3.6.1.4.1.3854.1.2.2.1.28 | IpAddress | read-write | mandatory |
| sensorProbeRouteAdd OBJECT-TYPE SP only: Up to 4, Manual additions to the routing table in the form, Network IP Address, Netmask, Gateway IP address | 1.3.6.1.4.1.3854.1.2.2.1.29 | DisplayString | read-write | mandatory |
| sensorProbeSendMail OBJECT-TYPE Turn on or off the sending of Mail | 1.3.6.1.4.1.3854.1.2.2.1.30 | INTEGER {on(1), off(2)} | read-write | mandatory |
| sensorProbeMailRecpt OBJECT-TYPE The email address of the Recipient | 1.3.6.1.4.1.3854.1.2.2.1.31 | DisplayString | read-write | mandatory |
| sensorProbeMailFrom OBJECT-TYPE The email address of the Sender | 1.3.6.1.4.1.3854.1.2.2.1.32 | DisplayString | read-write | mandatory |
| sensorProbeMailSMTP OBJECT-TYPE The Address of the SMTP server | 1.3.6.1.4.1.3854.1.2.2.1.33 | DisplayString | read-write | mandatory |
| sensorProbeMailJpgInline OBJECT-TYPE If the jpg for this event is sent as an http link or is included with mail as an attachment | 1.3.6.1.4.1.3854.1.2.2.1.34 | INTEGER {inline(1), link(2)} | read-write | mandatory |
| sensorProbeMailResendInterval OBJECT-TYPE How often to resend mail or Traps. Enter the number of seconds from 10 to 60. Mail for WARNING and ERROR are resent at this interval. Mail for Normal status are sent once | 1.3.6.1.4.1.3854.1.2.2.1.36 | INTEGER | read-write | mandatory |
| sensorProbeMailMaxResend OBJECT-TYPE The maximum number of times to resend mail. If set to 0 only send once. The maximum value is 5 | 1.3.6.1.4.1.3854.1.2.2.1.37 | INTEGER | read-write | mandatory |
| sensorProbeMailLastStatus OBJECT-TYPE The status of the most recent attempt to send an email | 1.3.6.1.4.1.3854.1.2.2.1.39 | DisplayString | read-only | mandatory |
| sensorProbeSupportMailRcpt OBJECT-TYPE SP8L only: E-Mail address of support | 1.3.6.1.4.1.3854.1.2.2.1.40 | DisplayString | read-write | mandatory |
| sensorProbeCameraServerTable OBJECT-TYPE CP8 Only: This table contains the Camera Server features, This allows the sensorProbe to connect to a sensorProbe | 1.3.6.1.4.1.3854.1.2.2.1.42 | not-accessible | mandatory | |
| sensorProbeCameraServerEntry OBJECT-TYPE This is an entry in the sensorProbeCameraServerEntry Table | 1.3.6.1.4.1.3854.1.2.2.1.42.1 | not-accessible | mandatory | |
| sensorProbeCameraServerClientOnline OBJECT-TYPE If this Client is currently online | 1.3.6.1.4.1.3854.1.2.2.1.42.1.1 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| sensorProbeCameraServerClientGoOnline OBJECT-TYPE To put this Client online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.1.2.2.1.42.1.2 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorProbeCameraServerClientIP OBJECT-TYPE The IP address of the sensorProbe, used to send snmp keep alive messages | 1.3.6.1.4.1.3854.1.2.2.1.42.1.3 | IpAddress | read-write | mandatory |
| sensorProbeCameraServerClientSetPassword OBJECT-TYPE SP Only: The Set Password for the snmp keep alive messages sent to the sensorProbes | 1.3.6.1.4.1.3854.1.2.2.1.42.1.4 | DisplayString | read-write | mandatory |
| sensorProbeCameraServerIndex OBJECT-TYPE The index into the Camera table | 1.3.6.1.4.1.3854.1.2.2.1.42.1.5 | INTEGER (0..9) | read-only | mandatory |
| sensorProbeJavaTimeOut OBJECT-TYPE Timeout in minutes for Java client | 1.3.6.1.4.1.3854.1.2.2.1.42.1.6 | INTEGER | read-write | mandatory |
| sensorProbeJpegQualityFactor OBJECT-TYPE Quality factor of jpeg image | 1.3.6.1.4.1.3854.1.2.2.1.42.1.7 | INTEGER (5..95) | read-write | mandatory |
| sensorProbeCameraDescription OBJECT-TYPE A description of camera | 1.3.6.1.4.1.3854.1.2.2.1.42.1.8 | DisplayString | read-write | mandatory |
| sensorProbeCameraRotate OBJECT-TYPE A Rotate of this camera | 1.3.6.1.4.1.3854.1.2.2.1.42.1.9 | INTEGER {nonRotate(0), rotate(1)} | read-write | mandatory |
| sensorProbeCameraResolution OBJECT-TYPE Resolution of camera | 1.3.6.1.4.1.3854.1.2.2.1.42.1.10 | INTEGER {resolution320x240(0), resolution640x480(1)} | read-write | mandatory |
| sensorProbePTZRotateRelative OBJECT-TYPE Control PTZ by put Direction and step 'DIR STEP' when direction 0 or 1 is LEFT or RIGH and 2 or 3 is UP or DOWN | 1.3.6.1.4.1.3854.1.2.2.1.42.1.11 | DisplayString | read-write | mandatory |
| sensorProbePTZRotateAbsolute OBJECT-TYPE Control PTZ by put position of x and y 'POS_X POS_Y' value of position is 0 to 100 | 1.3.6.1.4.1.3854.1.2.2.1.42.1.12 | DisplayString | read-write | mandatory |
| sensorProbeAudioAttachChannel OBJECT-TYPE Disable/Enable audio attachment | 1.3.6.1.4.1.3854.1.2.2.1.42.1.13 | INTEGER {notAttachAudio(0), attachAudio(1)} | read-write | mandatory |
| sensorProbePTZEnable OBJECT-TYPE Disable/Enable Ptz controller | 1.3.6.1.4.1.3854.1.2.2.1.42.1.14 | INTEGER {disable(0), enableInternal(1), enableExternal(2)} | read-write | mandatory |
| sensorProbePTZBrand OBJECT-TYPE PTZ Brand | 1.3.6.1.4.1.3854.1.2.2.1.42.1.15 | INTEGER {generalBrand(0), akcpBrand(1)} | read-write | mandatory |
| sensorProbePTZPanTiltUntilEnd OBJECT-TYPE Pan or Tilt PTZ until endpoint | 1.3.6.1.4.1.3854.1.2.2.1.42.1.16 | INTEGER {stop(0), right(1), left(2), up(3), down(4), right-up(5), right-down(6), left-up(7), left-down(8)} | read-write | mandatory |
| sensorProbeTrapMailPollInterval OBJECT-TYPE SP Only: How often the sensor thresholds are tested before sending traps or mail. This can vary from 3 to 15 seconds | 1.3.6.1.4.1.3854.1.2.2.1.50 | INTEGER | read-write | mandatory |
| sensorProbeSendTestMail OBJECT-TYPE Send out an email test message | 1.3.6.1.4.1.3854.1.2.2.1.51 | INTEGER | read-write | mandatory |
| sensorProbeLastSystemError OBJECT-TYPE A text string containing the description of the last system error | 1.3.6.1.4.1.3854.1.2.2.1.52 | DisplayString | read-only | mandatory |
| sensorProbeDataCollectionPeriod OBJECT-TYPE The number of minutes between collections of the data logger. This can vary from 1 to 60 minutes | 1.3.6.1.4.1.3854.1.2.2.1.53 | INTEGER | read-write | mandatory |
| sensorProbeMailTimeout OBJECT-TYPE The number of seconds to wait for a timeout while sending email This can vary from 10 to 30 seconds | 1.3.6.1.4.1.3854.1.2.2.1.54 | INTEGER | read-write | mandatory |
| sensorProbeAutoSense OBJECT-TYPE Enable Auto-sense feature | 1.3.6.1.4.1.3854.1.2.2.1.55 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeChecksum OBJECT-TYPE SP Only: The Flash Checksum, computed dynamically whenever this object is read | 1.3.6.1.4.1.3854.1.2.2.1.56 | INTEGER | read-only | mandatory |
| sensorProbeUsePassword OBJECT-TYPE Determines whether or not the set and get community are used to check for access rights | 1.3.6.1.4.1.3854.1.2.2.1.57 | INTEGER {usePassword(0), doNotUsePassword(1)} | read-write | mandatory |
| sensorProbeDisplayLogo OBJECT-TYPE Enable or Disable the display of the logo | 1.3.6.1.4.1.3854.1.2.2.1.59 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeTrapType OBJECT-TYPE Whether to generate a trap that covers all sensors, a specific trap for each sensor, or both types of traps | 1.3.6.1.4.1.3854.1.2.2.1.60 | INTEGER {specificTypeTrap(1), generalTypeTrap(2), bothTypeTraps(3), statusTypeTraps(4)} | read-write | mandatory |
| sensorProbeMailCC OBJECT-TYPE The email address of the CC | 1.3.6.1.4.1.3854.1.2.2.1.61 | DisplayString | read-write | mandatory |
| sensorProbeAllowIPChange OBJECT-TYPE This disables the changing of the IP address. The default is to enable changing the IP address | 1.3.6.1.4.1.3854.1.2.2.1.62 | INTEGER {enable(1), disable(2)} | read-write | mandatory |
| sensorProbeTimeOfDay OBJECT-TYPE The time of day in the format day/month/year hour(1-24):minutes:seconds for example 23/10/02 12:45:06 | 1.3.6.1.4.1.3854.1.2.2.1.65 | DisplayString | read-write | mandatory |
| sensorProbeEnableSysLog OBJECT-TYPE This enables sysLog Messages,including logging to the Net. The Destination IP of the net messages is the same as the source IP of the sender of this command | 1.3.6.1.4.1.3854.1.2.2.1.66 | INTEGER {enableLogToFlash(1), enableLogToNetAndFlash(2), disable(3)} | read-write | mandatory |
| sensorProbeReadSysLog OBJECT-TYPE Return the sysLog Message in the snmp PDU and if enableLogToNetAndFlash in sensorProbeEnableSysLog, also send in debug message format, A Write of a 2 will return all of the messages in debug format | 1.3.6.1.4.1.3854.1.2.2.1.67 | INTEGER {lastMessage(1), allMessages(2)} | read-write | mandatory |
| sensorProbeClearSysLog OBJECT-TYPE Delete all entries in the sys log | 1.3.6.1.4.1.3854.1.2.2.1.68 | INTEGER {allMessages(2)} | read-write | mandatory |
| sensorProbeSyslogDestIP OBJECT-TYPE The IP Address of the Syslog server. Note: This must be in dotted decimal form | 1.3.6.1.4.1.3854.1.2.2.1.69 | IpAddress | read-write | mandatory |
| sensorProbeSyslogPort OBJECT-TYPE The Port Number of the Syslog server. | 1.3.6.1.4.1.3854.1.2.2.1.70 | Gauge | read-write | mandatory |
| sensorProbeSetSyslogMsgPrefix OBJECT-TYPE SP Only: The Prefix message of the Syslog message | 1.3.6.1.4.1.3854.1.2.2.1.71 | DisplayString | read-write | mandatory |
| sensorProbeTimeZone OBJECT-TYPE System time zone | 1.3.6.1.4.1.3854.1.2.2.1.81 | INTEGER | read-write | mandatory |
| sensorProbeMegaVersion OBJECT-TYPE Version number of mega board | 1.3.6.1.4.1.3854.1.2.2.1.83 | INTEGER | read-only | mandatory |
| sensorProbeNtpMode OBJECT-TYPE Mode to synchronous with ntp server | 1.3.6.1.4.1.3854.1.2.2.1.84 | INTEGER {notUse(0), oneTime(1), onSystemStartUp(2), onceAMounth(3), onceAWeek(4), onceADay(5), onceAnHour(6), continuous(7)} | read-write | mandatory |
| sensorProbeNtpServer OBJECT-TYPE NTP server which this machine synchronous with | 1.3.6.1.4.1.3854.1.2.2.1.85 | DisplayString | read-write | mandatory |
| sensorProbeSMTPAuth OBJECT-TYPE This enables the SMTP authentication | 1.3.6.1.4.1.3854.1.2.2.1.87 | INTEGER {enable(1), disable(2)} | read-write | mandatory |
| sensorProbeSMTPLogin OBJECT-TYPE The username used to login into SMTP server | 1.3.6.1.4.1.3854.1.2.2.1.88 | DisplayString | read-write | mandatory |
| sensorProbeSMTPPassword OBJECT-TYPE The password used to login into SMTP server | 1.3.6.1.4.1.3854.1.2.2.1.89 | DisplayString | read-write | mandatory |
| sensorProbeDNSServer OBJECT-TYPE IP address of the DNS server | 1.3.6.1.4.1.3854.1.2.2.1.90 | IpAddress | read-write | mandatory |
| sensorProbeAltWebPort OBJECT-TYPE The alternative for a port number 80 used to access the web interface | 1.3.6.1.4.1.3854.1.2.2.1.91 | Gauge | read-write | mandatory |
| sensorProbeNumberOfSensorPort OBJECT-TYPE The number of sensor ports(regardless of their current state) | 1.3.6.1.4.1.3854.1.2.2.1.92 | INTEGER | read-only | mandatory |
| sensorProbeSendTrapsAlive OBJECT-TYPE On or off send keep alive traps. | 1.3.6.1.4.1.3854.1.2.2.1.93 | INTEGER {on(1), off(2)} | read-write | mandatory |
| sensorProbeTrapReIntervalAlive OBJECT-TYPE Time between each keep alive trap. | 1.3.6.1.4.1.3854.1.2.2.1.94 | INTEGER | read-write | mandatory |
| sensorProbeUseCamera OBJECT-TYPE On or off camera. | 1.3.6.1.4.1.3854.1.2.2.1.95 | INTEGER {off(0), on(1)} | read-write | mandatory |
| sensorProbeAdcCalibratePort OBJECT-TYPE Calibrate value for analog sensor. | 1.3.6.1.4.1.3854.1.2.2.1.96 | INTEGER | read-write | mandatory |
| sensorProbeMailSubject OBJECT-TYPE Email Subject. | 1.3.6.1.4.1.3854.1.2.2.1.98 | DisplayString | read-write | mandatory |
| sensorProbeSnmpPort OBJECT-TYPE SP Only: Port number used to access snmp | 1.3.6.1.4.1.3854.1.2.2.1.99 | Gauge | read-write | mandatory |
| sensorProbeSnmpTrapPort OBJECT-TYPE SP Only: Port number used to access trap snmp | 1.3.6.1.4.1.3854.1.2.2.1.100 | Gauge | read-write | mandatory |
| sensorProbeSnmpIndexingMode OBJECT-TYPE CP8 Only: Snmp table index starting from 0 or 1 | 1.3.6.1.4.1.3854.1.2.2.1.101 | INTEGER {index0(0), index1(1)} | read-write | mandatory |
| sensorProbeNotifyBoot OBJECT-TYPE SP2 Only: Enable Notify on boot up | 1.3.6.1.4.1.3854.1.2.2.1.103 | INTEGER | read-write | mandatory |
| sensorProbeDelayNotifyBoot OBJECT-TYPE SP2 Only: Delay time for boot up notify | 1.3.6.1.4.1.3854.1.2.2.1.104 | INTEGER | read-write | mandatory |
| sensorProbeSmtpPort OBJECT-TYPE SMTP Port number used to send email | 1.3.6.1.4.1.3854.1.2.2.1.105 | INTEGER | read-write | mandatory |
| sensorProbeReboot OBJECT-TYPE Reboot SP2/SP8 set to 1 | 1.3.6.1.4.1.3854.1.2.2.1.106 | INTEGER | read-write | mandatory |
| sensorProbeServerEnable OBJECT-TYPE Enable database changed notify feature | 1.3.6.1.4.1.3854.1.2.2.1.107 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| sensorProbeFirmwareVersion OBJECT-TYPE Current firmware version | 1.3.6.1.4.1.3854.1.2.2.1.108 | DisplayString | read-only | mandatory |
| sensorProbeProductType OBJECT-TYPE Product type | 1.3.6.1.4.1.3854.1.2.2.1.109 | INTEGER {sensorProbe2(1), sensorProbe8(2), cameraProbe(4), securityProbe(5), securityProbe5E(6), securityProbe5ES(11), securityProbe5ESV(12), securityProbeDCU(13), sensorProbePlus(16)} | read-only | mandatory |
| sensorProbeRequestResendTrap OBJECT-TYPE SP only: Send immediately all traps by set to 1 | 1.3.6.1.4.1.3854.1.2.2.1.110 | INTEGER | read-write | mandatory |
| sensorProbeSeparateEmail OBJECT-TYPE SP only: Separate Email by set 1 for not Separate Email set 0 | 1.3.6.1.4.1.3854.1.2.2.1.112 | INTEGER {notSeparate(0), separate(1)} | read-write | mandatory |
| sensorProbeMailCustom OBJECT-TYPE SP only: Custom mail is removed 'http://' in the mail footer | 1.3.6.1.4.1.3854.1.2.2.1.113 | INTEGER {normal(0), custom(1)} | read-write | mandatory |
| sensorProbeUntidePassword OBJECT-TYPE Use web password as SNMP password | 1.3.6.1.4.1.3854.1.2.2.1.114 | INTEGER {tidePassword(0), untidePassword(1)} | read-only | mandatory |
| sensorProbeReloadNetwork OBJECT-TYPE Set 1 for reload network seting | 1.3.6.1.4.1.3854.1.2.2.1.116 | INTEGER {reload(1)} | read-write | mandatory |
| sensorProbeStatusNumber OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.117 | |||
| sensorProbeStatusNumberNotNormal OBJECT-TYPE Number of sensor status is Warning, Critical and Sensor Error | 1.3.6.1.4.1.3854.1.2.2.1.117.1 | INTEGER | read-only | mandatory |
| sensorProbeStatusNumberCriticalAndError OBJECT-TYPE Number of sensor status is Critical and Sensor Error | 1.3.6.1.4.1.3854.1.2.2.1.117.2 | INTEGER | read-only | mandatory |
| sensorProbeStatusNumberError OBJECT-TYPE Number of sensor status is Sensor Error | 1.3.6.1.4.1.3854.1.2.2.1.117.3 | INTEGER | read-only | mandatory |
| sensorProbeTypeName OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.118 | |||
| sensorProbeTypeTemperatureName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.1 | DisplayString | read-write | mandatory |
| sensorProbeTypeSHT11HumidityName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.2 | DisplayString | read-write | mandatory |
| sensorProbeTypeSHT11TempName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.3 | DisplayString | read-write | mandatory |
| sensorProbeType4to20MAName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.4 | DisplayString | read-write | mandatory |
| sensorProbeTypeDCvoltageName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.5 | DisplayString | read-write | mandatory |
| sensorProbeTypeAirflowName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.6 | DisplayString | read-write | mandatory |
| sensorProbeTypeDrycontactInoutName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.7 | DisplayString | read-write | mandatory |
| sensorProbeTypeDrycontactInputName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.8 | DisplayString | read-write | mandatory |
| sensorProbeTypeMotionName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.9 | DisplayString | read-write | mandatory |
| sensorProbeTypeWaterName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.10 | DisplayString | read-write | mandatory |
| sensorProbeTypeSecurityName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.11 | DisplayString | read-write | mandatory |
| sensorProbeTypeSirenName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.12 | DisplayString | read-write | mandatory |
| sensorProbeTypeRelayName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.13 | DisplayString | read-write | mandatory |
| sensorProbeTypeACvoltageName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.14 | DisplayString | read-write | mandatory |
| sensorProbeTypeADE7763VRMSName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.15 | DisplayString | read-write | mandatory |
| sensorProbeTypeADE7763IRMSName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.16 | DisplayString | read-write | mandatory |
| sensorProbeTypeADE7763WattName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.17 | DisplayString | read-write | mandatory |
| sensorProbeTypeADE7763WatthourName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.18 | DisplayString | read-write | mandatory |
| sensorProbeTypePCF8574XRelayName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.19 | DisplayString | read-write | mandatory |
| sensorProbeTypeThermocoupleName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.20 | DisplayString | read-write | mandatory |
| sensorProbeTypeSmokeName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.21 | DisplayString | read-write | mandatory |
| sensorProbeTypeXDryName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.22 | DisplayString | read-write | mandatory |
| sensorProbeTypeTemperatureArrayName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.23 | DisplayString | read-write | mandatory |
| sensorProbeTypeWaterRopeName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.24 | DisplayString | read-write | mandatory |
| sensorProbeTypeFuelLevelName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.25 | DisplayString | read-write | mandatory |
| sensorProbeTypeTankSenderName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.26 | DisplayString | read-write | mandatory |
| sensorProbeTypeThermostatName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.128 | DisplayString | read-write | mandatory |
| sensorProbeTypeVirtualName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.129 | DisplayString | read-write | mandatory |
| sensorProbeTypeSoundName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.130 | DisplayString | read-write | mandatory |
| sensorProbeTypeSoftMotionName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.131 | DisplayString | read-write | mandatory |
| sensorProbeTypeNoSignalName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.132 | DisplayString | read-write | mandatory |
| sensorProbeTypePowerMeterName OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.134 | DisplayString | read-write | mandatory |
| sensorProbeTypeSHT11Name OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.135 | DisplayString | read-write | mandatory |
| sensorProbeTypeADE7763Name OBJECT-TYPE A Description of Sensor Type Name on web interface | 1.3.6.1.4.1.3854.1.2.2.1.118.136 | DisplayString | read-write | mandatory |
| sensorProbeProductRevision OBJECT-TYPE SP only: Revision number | 1.3.6.1.4.1.3854.1.2.2.1.119 | INTEGER | read-only | mandatory |
| sensorProbePowerMeter OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.2.2.1.125 | |||
| sensorProbePowerMeter1phDelayBetweenCommand OBJECT-TYPE A delay time between command for 1ph power meter(in milliseconds) | 1.3.6.1.4.1.3854.1.2.2.1.125.1 | INTEGER | read-write | mandatory |
| sensorProbePowerMeter3phDelayBetweenCommand OBJECT-TYPE A delay time between command for 3ph power meter(in milliseconds) | 1.3.6.1.4.1.3854.1.2.2.1.125.2 | INTEGER | read-write | mandatory |
| sensorProbePowerMeter1phDelayBetweenMeter OBJECT-TYPE A delay time of command between power meter(in milliseconds) | 1.3.6.1.4.1.3854.1.2.2.1.125.3 | INTEGER | read-write | mandatory |
| sensorProbePowerMeter3phDelayBetweenMeter OBJECT-TYPE A delay time of command between power meter(in milliseconds) | 1.3.6.1.4.1.3854.1.2.2.1.125.4 | INTEGER | read-write | mandatory |
| sensorProbePowerMeterWaitTimeout OBJECT-TYPE A waiting timeout for receiving a command(in milliseconds) | 1.3.6.1.4.1.3854.1.2.2.1.125.5 | INTEGER | read-write | mandatory |
| sensorProbePowerMeterCountSentPacket OBJECT-TYPE Count send packets of this sensorProbe | 1.3.6.1.4.1.3854.1.2.2.1.125.6 | INTEGER | read-only | mandatory |
| sensorProbePowerMeterCountRecievedPacket OBJECT-TYPE Count received packets of this sensorProbe | 1.3.6.1.4.1.3854.1.2.2.1.125.7 | INTEGER | read-only | mandatory |
| sensorProbePowerMeterCountTimeoutPacket OBJECT-TYPE Count timeout packets of this sensorProbe | 1.3.6.1.4.1.3854.1.2.2.1.125.8 | INTEGER | read-only | mandatory |
| sensorProbePowerMeterCountCRCErrorPacket OBJECT-TYPE Count error crc packets of this sensorProbe | 1.3.6.1.4.1.3854.1.2.2.1.125.9 | INTEGER | read-only | mandatory |
| sensorProbeTraps OBJECT-IDENTITY | 1.3.6.1.4.1.3854.1.7 | |||
| spSensorStatus OBJECT-TYPE The current integer status of the sensor causing this trap to be sent | 1.3.6.1.4.1.3854.1.7.1 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7), turnOn(8), turnOff(9)} | read-only | mandatory |
| spSensorValue OBJECT-TYPE The current integer value of the sensor causing this trap to be sent | 1.3.6.1.4.1.3854.1.7.2 | INTEGER | read-only | mandatory |
| spSensorLevelExceeded OBJECT-TYPE The integer level that was exceeded causing this trap to be sent | 1.3.6.1.4.1.3854.1.7.3 | INTEGER | read-only | mandatory |
| spSensorIndex OBJECT-TYPE The integer index of the sensor causing this trap to be sent | 1.3.6.1.4.1.3854.1.7.4 | INTEGER | read-only | mandatory |
| spSensorName OBJECT-TYPE The name of the sensor causing this trap to be sent | 1.3.6.1.4.1.3854.1.7.5 | DisplayString | read-only | mandatory |
| spSensorDescription OBJECT-TYPE The description of the sensor causing this trap to be sent | 1.3.6.1.4.1.3854.1.7.6 | DisplayString | read-only | mandatory |
| spSensorProbeKeepAlive OBJECT-TYPE Keep alive trap to be sent | 1.3.6.1.4.1.3854.1.7.7 | INTEGER | read-only | mandatory |
| spSensorType OBJECT-TYPE Type of this sensor | 1.3.6.1.4.1.3854.1.7.8 | INTEGER {temperature(1), fourTo20mA(2), humidity(3), water(4), atod(5), security(6), airflow(8), siren(9), dryContact(10), voltage(12), relay(13), motion(14), extradrycontact(16), thermostat(23), smoke(24), power(25), irms(26), vrms(27), watt(28), relayarray(29), virtual(30), watthour(32), temperaturearray(33), waterrope(34), fuellevel(35), tanksender(36), sound(128), softwaremotion(129), nosignal(132), powermeter(134), door(138)} | read-only | mandatory |
| spSensorStatusName OBJECT-TYPE The current status of the sensor causing this trap to be sent | 1.3.6.1.4.1.3854.1.7.9 | DisplayString | read-only | mandatory |
| spSensorSubIndex OBJECT-TYPE The integer sub index of the sensor causing this trap to be sent. Only for temperaturearray and relayarray | 1.3.6.1.4.1.3854.1.7.10 | INTEGER | read-only | mandatory |
| spBoardIndex OBJECT-TYPE The integer index of the sensor board causing this trap to be sent. | 1.3.6.1.4.1.3854.1.7.11 | INTEGER | read-only | mandatory |
| spBoardDescription OBJECT-TYPE The description of the sensor board causing this trap to be sent | 1.3.6.1.4.1.3854.1.7.12 | DisplayString | read-only | mandatory |
| spEventTimeStamp OBJECT-TYPE The time(MM/DD/YYYY HH:MM:SS) of an event causing this trap to be sent | 1.3.6.1.4.1.3854.1.7.13 | DisplayString | read-only | mandatory |
| spEventClassNumber OBJECT-TYPE The user-defined class number associated with this trap | 1.3.6.1.4.1.3854.1.7.14 | INTEGER | read-only | mandatory |
| spEventClassName OBJECT-TYPE The user-defined class Name associated with this trap | 1.3.6.1.4.1.3854.1.7.15 | DisplayString | read-only | mandatory |
| spSensorDecimalValue OBJECT-TYPE The current decimal value of the sensor causing this trap to be sent | 1.3.6.1.4.1.3854.1.7.16 | DisplayString | read-only | mandatory |
| spSensorAliveHigh OBJECT-TYPE The highest sensor value in the period | 1.3.6.1.4.1.3854.1.7.17 | INTEGER | read-only | mandatory |
| spSensorAliveLow OBJECT-TYPE The lowset sensor value in the period | 1.3.6.1.4.1.3854.1.7.18 | INTEGER | read-only | mandatory |
| securityProbe OBJECT-IDENTITY | 1.3.6.1.4.1.3854.2 | |||
| secSummary OBJECT-IDENTITY | 1.3.6.1.4.1.3854.2.1 | |||
| secDevice OBJECT-IDENTITY | 1.3.6.1.4.1.3854.2.2 | |||
| deviceTable OBJECT-TYPE This table contains the property for every plugged-in device. | 1.3.6.1.4.1.3854.2.2.1 | not-accessible | mandatory | |
| deviceEntry OBJECT-TYPE This is an entry in the deviceEntry Table | 1.3.6.1.4.1.3854.2.2.1.1 | not-accessible | mandatory | |
| deviceIndex OBJECT-TYPE The index into the device table | 1.3.6.1.4.1.3854.2.2.1.1.1 | INTEGER (1..184549375) | read-only | mandatory |
| deviceDescription OBJECT-TYPE A Description of this device | 1.3.6.1.4.1.3854.2.2.1.1.2 | DisplayString | read-write | mandatory |
| deviceType OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.1.1.3 | INTEGER | read-only | mandatory |
| deviceInfo OBJECT-TYPE A information of this device | 1.3.6.1.4.1.3854.2.2.1.1.4 | DisplayString | read-only | mandatory |
| deviceStatus OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.1.1.5 | INTEGER | read-only | mandatory |
| deviceWorstSensotStatus OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.1.1.6 | INTEGER | read-only | mandatory |
| deviceIntelligentTable OBJECT-TYPE This table contains the property for every plugged-in device. | 1.3.6.1.4.1.3854.2.2.2 | not-accessible | mandatory | |
| deviceIntelligentEntry OBJECT-TYPE This is an entry in the deviceEntry Table | 1.3.6.1.4.1.3854.2.2.2.1 | not-accessible | mandatory | |
| deviceIntelligentIndex OBJECT-TYPE The index into the deviceIntelligent table | 1.3.6.1.4.1.3854.2.2.2.1.1 | INTEGER (1..65535) | read-only | mandatory |
| deviceIntelligentDescription OBJECT-TYPE A Description of this device | 1.3.6.1.4.1.3854.2.2.2.1.2 | DisplayString | read-write | mandatory |
| deviceIntelligentInfo OBJECT-TYPE A information of this device | 1.3.6.1.4.1.3854.2.2.2.1.4 | DisplayString | read-only | mandatory |
| deviceIntelligentStatus OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.2.1.5 | INTEGER | read-only | mandatory |
| sensorIntelligentTypeSelected OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.2.1.6 | INTEGER | read-write | mandatory |
| deviceIntelligentWorstSensotStatus OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.2.1.7 | INTEGER | read-only | mandatory |
| sensorIntelligentPort1GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.2.1.100 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorIntelligentPort2GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.2.1.101 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorIntelligentPort3GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.2.1.102 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorIntelligentPort4GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.2.1.103 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorIntelligentPort5GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.2.1.104 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorIntelligentPort6GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.2.1.105 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorIntelligentPort7GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.2.1.106 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorIntelligentPort8GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.2.1.107 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| deviceDryContactTable OBJECT-TYPE This table contains the property for every plugged-in device. | 1.3.6.1.4.1.3854.2.2.3 | not-accessible | mandatory | |
| deviceDryContactEntry OBJECT-TYPE This is an entry in the deviceEntry Table | 1.3.6.1.4.1.3854.2.2.3.1 | not-accessible | mandatory | |
| deviceDryContactIndex OBJECT-TYPE The index into the deviceDryContact table | 1.3.6.1.4.1.3854.2.2.3.1.1 | INTEGER (1..65535) | read-only | mandatory |
| deviceDryContactDescription OBJECT-TYPE A Description of this device | 1.3.6.1.4.1.3854.2.2.3.1.2 | DisplayString | read-write | mandatory |
| deviceDryContactInfo OBJECT-TYPE A information of this device | 1.3.6.1.4.1.3854.2.2.3.1.4 | DisplayString | read-only | mandatory |
| deviceDryContactStatus OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.3.1.5 | INTEGER | read-only | mandatory |
| deviceDryContactWorstSensotStatus OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.3.1.6 | INTEGER | read-only | mandatory |
| sensorDryContactPort1GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.3.1.100 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorDryContactPort2GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.3.1.101 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorDryContactPort3GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.3.1.102 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorDryContactPort4GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.3.1.103 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorDryContactPort5GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.3.1.104 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorDryContactPort6GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.3.1.105 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorDryContactPort7GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.3.1.106 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorDryContactPort8GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.3.1.107 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorDryContactPort9GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.3.1.108 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorDryContactPort10GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.3.1.109 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorDryContactPort11GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.3.1.110 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorDryContactPort12GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.3.1.111 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorDryContactPort13GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.3.1.112 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorDryContactPort14GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.3.1.113 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorDryContactPort15GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.3.1.114 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| sensorDryContactPort16GoOnline OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.3.1.115 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| deviceAccessTable OBJECT-TYPE This table contains the property for every plugged-in device. | 1.3.6.1.4.1.3854.2.2.4 | not-accessible | mandatory | |
| deviceAccessEntry OBJECT-TYPE This is an entry in the deviceEntry Table | 1.3.6.1.4.1.3854.2.2.4.1 | not-accessible | mandatory | |
| deviceAccessIndex OBJECT-TYPE The index into the deviceAccess table | 1.3.6.1.4.1.3854.2.2.4.1.1 | INTEGER (1..65535) | read-only | mandatory |
| deviceAccessDescription OBJECT-TYPE A Description of this device | 1.3.6.1.4.1.3854.2.2.4.1.2 | DisplayString | read-write | mandatory |
| deviceAccessInfo OBJECT-TYPE A information of this device | 1.3.6.1.4.1.3854.2.2.4.1.4 | DisplayString | read-only | mandatory |
| deviceAccessStatus OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.4.1.5 | INTEGER | read-only | mandatory |
| deviceAccessWorstSensorStatus OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.4.1.7 | INTEGER | read-only | mandatory |
| devicePowerMeterTable OBJECT-TYPE This table contains the property for every power meter plugged-in. | 1.3.6.1.4.1.3854.2.2.5 | not-accessible | mandatory | |
| devicePowerMeterEntry OBJECT-TYPE This is an entry in the devicePowerMeterEntry Table | 1.3.6.1.4.1.3854.2.2.5.1 | not-accessible | mandatory | |
| devicePowerMeterIndex OBJECT-TYPE The index into the power meter table | 1.3.6.1.4.1.3854.2.2.5.1.1 | INTEGER (1..184549375) | read-only | mandatory |
| devicePowerMeterDescription OBJECT-TYPE A Description of this power meter | 1.3.6.1.4.1.3854.2.2.5.1.2 | DisplayString | read-write | mandatory |
| devicePowerMeterInfo OBJECT-TYPE A information of this power meter | 1.3.6.1.4.1.3854.2.2.5.1.4 | DisplayString | read-only | mandatory |
| devicePowerMeterStatus OBJECT-TYPE A status of this power meter | 1.3.6.1.4.1.3854.2.2.5.1.5 | INTEGER | read-only | mandatory |
| devicePowerMeterWorstSensotStatus OBJECT-TYPE ... | 1.3.6.1.4.1.3854.2.2.5.1.7 | INTEGER | read-only | mandatory |
| devicePowerMeterType OBJECT-TYPE A type of this power meter | 1.3.6.1.4.1.3854.2.2.5.1.9 | INTEGER | read-only | mandatory |
| devicePowerMeterDelayBetweenCommand OBJECT-TYPE A delay time between communication packet of this power meter(in milliseconds) | 1.3.6.1.4.1.3854.2.2.5.1.10 | INTEGER | read-write | mandatory |
| devicePowerMeterCountSentPacket OBJECT-TYPE Count send packets of this sensor | 1.3.6.1.4.1.3854.2.2.5.1.11 | INTEGER | read-only | mandatory |
| devicePowerMeterCountRecievedPacket OBJECT-TYPE Count received packets of this sensor | 1.3.6.1.4.1.3854.2.2.5.1.12 | INTEGER | read-only | mandatory |
| devicePowerMeterCountTimeoutPacket OBJECT-TYPE Count timeout packets of this sensor | 1.3.6.1.4.1.3854.2.2.5.1.13 | INTEGER | read-only | mandatory |
| devicePowerMeterCountCRCerrorPacket OBJECT-TYPE Count error crc packets of this sensor | 1.3.6.1.4.1.3854.2.2.5.1.14 | INTEGER | read-only | mandatory |
| deviceLicense OBJECT-IDENTITY | 1.3.6.1.4.1.3854.2.2.6 | |||
| deviceLicenseExpTotal OBJECT-TYPE Expansion License Total | 1.3.6.1.4.1.3854.2.2.6.1 | INTEGER | read-only | mandatory |
| deviceLicenseExpUsed OBJECT-TYPE Expansion License Used | 1.3.6.1.4.1.3854.2.2.6.2 | INTEGER | read-only | mandatory |
| deviceLicenseExpAvailable OBJECT-TYPE Expansion License Available | 1.3.6.1.4.1.3854.2.2.6.3 | INTEGER | read-only | mandatory |
| deviceLicensePmsTotal OBJECT-TYPE PMS License Total | 1.3.6.1.4.1.3854.2.2.6.4 | INTEGER | read-only | mandatory |
| deviceLicensePmsUsed OBJECT-TYPE PMS License Used | 1.3.6.1.4.1.3854.2.2.6.5 | INTEGER | read-only | mandatory |
| deviceLicensePmsAvailable OBJECT-TYPE PMS License Available | 1.3.6.1.4.1.3854.2.2.6.6 | INTEGER | read-only | mandatory |
| deviceLicenseVrtTotal OBJECT-TYPE Virtual License Total | 1.3.6.1.4.1.3854.2.2.6.7 | INTEGER | read-only | mandatory |
| deviceLicenseVrtUsed OBJECT-TYPE Virtual License Used | 1.3.6.1.4.1.3854.2.2.6.8 | INTEGER | read-only | mandatory |
| deviceLicenseVrtAvailable OBJECT-TYPE Virtual License Available | 1.3.6.1.4.1.3854.2.2.6.9 | INTEGER | read-only | mandatory |
| deviceLicenseIPv6Enable OBJECT-TYPE IPv6 License Enable (0 : Disable, 1 : Enable) | 1.3.6.1.4.1.3854.2.2.6.10 | INTEGER | read-only | mandatory |
| deviceLicenseTable OBJECT-TYPE This table contains the license of Expansion board, PMS and Virtual sensor. | 1.3.6.1.4.1.3854.2.2.6.11 | not-accessible | mandatory | |
| deviceLicenseEntry OBJECT-TYPE This is an entry in the deviceLicenseEntry Table | 1.3.6.1.4.1.3854.2.2.6.11.1 | not-accessible | mandatory | |
| deviceLicenseIndex OBJECT-TYPE The index into the device table (License Key) | 1.3.6.1.4.1.3854.2.2.6.11.1.1 | DisplayString | read-only | mandatory |
| deviceLicenseExpCount OBJECT-TYPE Expansion Connection | 1.3.6.1.4.1.3854.2.2.6.11.1.2 | INTEGER | read-only | mandatory |
| deviceLicensePmsCount OBJECT-TYPE PMS Unit number | 1.3.6.1.4.1.3854.2.2.6.11.1.3 | INTEGER | read-only | mandatory |
| deviceLicenseVrtCount OBJECT-TYPE Virtual Sensor | 1.3.6.1.4.1.3854.2.2.6.11.1.4 | INTEGER | read-only | mandatory |
| deviceLicenseIpv6 OBJECT-TYPE IPv6 license enable (0 : Disable, 1 : Enable) | 1.3.6.1.4.1.3854.2.2.6.11.1.5 | INTEGER | read-only | mandatory |
| deviceLicenseStatus OBJECT-TYPE License status | 1.3.6.1.4.1.3854.2.2.6.11.1.6 | INTEGER {activated(1), deactivated(2)} | read-only | mandatory |
| secSensor OBJECT-IDENTITY | 1.3.6.1.4.1.3854.2.3 | |||
| sensorTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.3.1 | not-accessible | mandatory | |
| sensorEntry OBJECT-TYPE This is an entry in the sensorTable Table | 1.3.6.1.4.1.3854.2.3.1.1 | not-accessible | mandatory | |
| sensorIndex OBJECT-TYPE The index into the sensor table | 1.3.6.1.4.1.3854.2.3.1.1.1 | INTEGER (1..65535) | read-only | mandatory |
| sensorDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.3.1.1.2 | DisplayString | read-write | mandatory |
| sensorType OBJECT-TYPE Enter the type of this Sensor | 1.3.6.1.4.1.3854.2.3.1.1.3 | INTEGER {temperature(1), humidity(2), temperature-dual(3), four-20mA(4), dcvoltage(5), airflow(6), io(7), drycontact(8), motion(9), water(10), security(11), siren(12), relay(13), acvoltage(14), vrms(15), irms(16), watt(17), watthour(18), xrelay(19), thermocouple(20), smoke(21), drycontact-array(22), temperature-array(23), thermostat(128), virtual(129), sound(130), softmotion(131), camera-dummy(132), board-state(133), nosignal(224), test(255)} | read-only | mandatory |
| sensorValue OBJECT-TYPE The value in this sensor | 1.3.6.1.4.1.3854.2.3.1.1.4 | INTEGER | read-only | mandatory |
| sensorUnit OBJECT-TYPE The unit string | 1.3.6.1.4.1.3854.2.3.1.1.5 | DisplayString | read-only | mandatory |
| sensorStatus OBJECT-TYPE The current status of this sensor | 1.3.6.1.4.1.3854.2.3.1.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.3.1.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| sensorPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.3.1.1.35 | INTEGER (0..65534) | read-only | mandatory |
| sensorSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.3.1.1.36 | INTEGER (0..65534) | read-only | mandatory |
| sensorDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.3.1.1.37 | INTEGER (0..65534) | read-only | mandatory |
| sensorDisplayStyle OBJECT-TYPE Temperature display style | 1.3.6.1.4.1.3854.2.3.1.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| sensorHighCriticalDescription OBJECT-TYPE A HighCritical Description of this sensor | 1.3.6.1.4.1.3854.2.3.1.1.46 | DisplayString | read-write | mandatory |
| sensorLowCriticalDescription OBJECT-TYPE A LowCritical Description of this sensor | 1.3.6.1.4.1.3854.2.3.1.1.47 | DisplayString | read-write | mandatory |
| sensorNormalDescription OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.3.1.1.48 | DisplayString | read-write | mandatory |
| sensorLowWarningDescription OBJECT-TYPE A LowWarning Description of this sensor | 1.3.6.1.4.1.3854.2.3.1.1.49 | DisplayString | read-write | mandatory |
| sensorHighWarningDescription OBJECT-TYPE A HighWarning Description of this sensor | 1.3.6.1.4.1.3854.2.3.1.1.50 | DisplayString | read-write | mandatory |
| sensorErrorDescription OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.3.1.1.51 | DisplayString | read-write | mandatory |
| sensorOnDescription OBJECT-TYPE A On Description of this sensor | 1.3.6.1.4.1.3854.2.3.1.1.52 | DisplayString | read-write | mandatory |
| sensorOffDescription OBJECT-TYPE A Off Description of this sensor | 1.3.6.1.4.1.3854.2.3.1.1.53 | DisplayString | read-write | mandatory |
| sensorHighCriticalColor OBJECT-TYPE A HighCritical Color of this sensor | 1.3.6.1.4.1.3854.2.3.1.1.54 | INTEGER | read-write | mandatory |
| sensorLowCriticalColor OBJECT-TYPE A LowCritical Color of this sensor | 1.3.6.1.4.1.3854.2.3.1.1.55 | INTEGER | read-write | mandatory |
| sensorNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.3.1.1.56 | INTEGER | read-write | mandatory |
| sensorLowWarningColor OBJECT-TYPE A LowWarning Color of this sensor | 1.3.6.1.4.1.3854.2.3.1.1.57 | INTEGER | read-write | mandatory |
| sensorHighWarningColor OBJECT-TYPE A HighWarning Color of this sensor | 1.3.6.1.4.1.3854.2.3.1.1.58 | INTEGER | read-write | mandatory |
| sensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.3.1.1.59 | INTEGER | read-write | mandatory |
| sensorOnColor OBJECT-TYPE A On Color of this sensor | 1.3.6.1.4.1.3854.2.3.1.1.60 | INTEGER | read-write | mandatory |
| sensorOffColor OBJECT-TYPE A Off Color of this sensor | 1.3.6.1.4.1.3854.2.3.1.1.61 | INTEGER | read-write | mandatory |
| sensorAcknowledge OBJECT-TYPE Sensor acknowledge | 1.3.6.1.4.1.3854.2.3.1.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| sensorValueFormatFloat OBJECT-TYPE The floating-point IEEE Standard 754 reading value in this sensor | 1.3.6.1.4.1.3854.2.3.1.1.99 | Opaque (SIZE(4)) | read-only | mandatory |
| sensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.3.1.1.1000 | INTEGER | read-only | mandatory |
| sensorTemperatureTable OBJECT-TYPE This table contains the property and reading value for every Temperature sensor. | 1.3.6.1.4.1.3854.2.3.2 | not-accessible | mandatory | |
| sensorTemperatureEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.3.2.1 | not-accessible | mandatory | |
| sensorTemperatureIndex OBJECT-TYPE The index into the sensor table | 1.3.6.1.4.1.3854.2.3.2.1.1 | INTEGER (1..65535) | read-only | mandatory |
| sensorTemperatureDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.3.2.1.2 | DisplayString | read-write | mandatory |
| sensorTemperatureType OBJECT-TYPE Enter the type of this Sensor | 1.3.6.1.4.1.3854.2.3.2.1.3 | INTEGER {temperature(1), dualsensor(3), thermocouple(20), arraytemp(23)} | read-only | mandatory |
| sensorTemperatureDegree OBJECT-TYPE The degrees in this sensor | 1.3.6.1.4.1.3854.2.3.2.1.4 | INTEGER | read-only | mandatory |
| sensorTemperatureUnit OBJECT-TYPE The unit string | 1.3.6.1.4.1.3854.2.3.2.1.5 | DisplayString | read-only | mandatory |
| sensorTemperatureStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.2.3.2.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorTemperatureGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.3.2.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| sensorTemperatureLowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.3.2.1.9 | INTEGER | read-write | mandatory |
| sensorTemperatureLowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.3.2.1.10 | INTEGER | read-write | mandatory |
| sensorTemperatureHighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.3.2.1.11 | INTEGER | read-write | mandatory |
| sensorTemperatureHighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.3.2.1.12 | INTEGER | read-write | mandatory |
| sensorTemperatureRearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.2.3.2.1.13 | INTEGER | read-write | mandatory |
| sensorTemperatureDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.2.3.2.1.14 | INTEGER (0..65534) | read-write | mandatory |
| sensorTemperatureDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.2.3.2.1.15 | INTEGER (0..65534) | read-write | mandatory |
| sensorTemperatureDelayLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.3.2.1.16 | INTEGER (0..65535) | read-write | mandatory |
| sensorTemperatureDelayLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.3.2.1.17 | INTEGER (0..65535) | read-write | mandatory |
| sensorTemperatureDelayHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.3.2.1.18 | INTEGER (0..65535) | read-write | mandatory |
| sensorTemperatureDelayHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.3.2.1.19 | INTEGER (0..65535) | read-write | mandatory |
| sensorTemperatureRaw OBJECT-TYPE The raw degree data from the temperature sensor, slightly higher resolution | 1.3.6.1.4.1.3854.2.3.2.1.20 | INTEGER | read-only | mandatory |
| sensorTemperatureOffset OBJECT-TYPE Temperature Offset reading | 1.3.6.1.4.1.3854.2.3.2.1.21 | INTEGER | read-write | mandatory |
| sensorTemperaturePort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.3.2.1.35 | INTEGER (0..65534) | read-only | mandatory |
| sensorTemperatureSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.3.2.1.36 | INTEGER (0..65534) | read-only | mandatory |
| sensorTemperatureDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.3.2.1.37 | INTEGER (0..65534) | read-only | mandatory |
| sensorTemperatureDisplayStyle OBJECT-TYPE Temperature display style | 1.3.6.1.4.1.3854.2.3.2.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| sensorTemperatureHighCriticalDesc OBJECT-TYPE A HighCritical Description of this sensor | 1.3.6.1.4.1.3854.2.3.2.1.46 | DisplayString | read-write | mandatory |
| sensorTemperatureLowCriticalDesc OBJECT-TYPE A LowCritical Description of this sensor | 1.3.6.1.4.1.3854.2.3.2.1.47 | DisplayString | read-write | mandatory |
| sensorTemperatureNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.3.2.1.48 | DisplayString | read-write | mandatory |
| sensorTemperatureLowWarningDesc OBJECT-TYPE A LowWarning Description of this sensor | 1.3.6.1.4.1.3854.2.3.2.1.49 | DisplayString | read-write | mandatory |
| sensorTemperatureHighWarningDesc OBJECT-TYPE A HighWarning Description of this sensor | 1.3.6.1.4.1.3854.2.3.2.1.50 | DisplayString | read-write | mandatory |
| sensorTemperatureSensorErrorDesc OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.3.2.1.51 | DisplayString | read-write | mandatory |
| sensorTemperatureHighCriticalColor OBJECT-TYPE A HighCritical Color of this sensor | 1.3.6.1.4.1.3854.2.3.2.1.54 | INTEGER | read-write | mandatory |
| sensorTemperatureLowCriticalColor OBJECT-TYPE A LowCritical Color of this sensor | 1.3.6.1.4.1.3854.2.3.2.1.55 | INTEGER | read-write | mandatory |
| sensorTemperatureNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.3.2.1.56 | INTEGER | read-write | mandatory |
| sensorTemperatureLowWarningColor OBJECT-TYPE A LowWarning Color of this sensor | 1.3.6.1.4.1.3854.2.3.2.1.57 | INTEGER | read-write | mandatory |
| sensorTemperatureHighWarningColor OBJECT-TYPE A HighWarning Color of this sensor | 1.3.6.1.4.1.3854.2.3.2.1.58 | INTEGER | read-write | mandatory |
| sensorTemperatureSensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.3.2.1.59 | INTEGER | read-write | mandatory |
| sensorTemperatureAcknowledge OBJECT-TYPE Temperature sensor acknowledge | 1.3.6.1.4.1.3854.2.3.2.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| sensorTemperatureSerialNumber OBJECT-TYPE Serial Number of Temperature Sensor in the following format x is Hex Digit xx-xx-xx-xx-xx-xx-xx-xx | 1.3.6.1.4.1.3854.2.3.2.1.71 | DisplayString | read-write | mandatory |
| sensorTemperatureId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.3.2.1.1000 | INTEGER | read-only | mandatory |
| sensorHumidityTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.3.3 | not-accessible | mandatory | |
| sensorHumidityEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.3.3.1 | not-accessible | mandatory | |
| sensorHumidityIndex OBJECT-TYPE The index into the sensor table | 1.3.6.1.4.1.3854.2.3.3.1.1 | INTEGER (1..65535) | read-only | mandatory |
| sensorHumidityDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.3.3.1.2 | DisplayString | read-write | mandatory |
| sensorHumidityPercent OBJECT-TYPE The relative humidity percentage measured by this sensor | 1.3.6.1.4.1.3854.2.3.3.1.4 | INTEGER | read-only | mandatory |
| sensorHumidityUnit OBJECT-TYPE The unit string | 1.3.6.1.4.1.3854.2.3.3.1.5 | DisplayString | read-write | mandatory |
| sensorHumidityStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.2.3.3.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorHumidityGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.3.3.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| sensorHumidityLowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.3.3.1.9 | INTEGER | read-write | mandatory |
| sensorHumidityLowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.3.3.1.10 | INTEGER | read-write | mandatory |
| sensorHumidityHighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.3.3.1.11 | INTEGER | read-write | mandatory |
| sensorHumidityHighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.3.3.1.12 | INTEGER | read-write | mandatory |
| sensorHumidityRearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.2.3.3.1.13 | INTEGER | read-write | mandatory |
| sensorHumidityDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.2.3.3.1.14 | INTEGER (0..65534) | read-write | mandatory |
| sensorHumidityDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.2.3.3.1.15 | INTEGER (0..65534) | read-write | mandatory |
| sensorHumidityDelayLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.3.3.1.16 | INTEGER (0..65535) | read-write | mandatory |
| sensorHumidityDelayLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.3.3.1.17 | INTEGER (0..65535) | read-write | mandatory |
| sensorHumidityDelayHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.3.3.1.18 | INTEGER (0..65535) | read-write | mandatory |
| sensorHumidityDelayHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.3.3.1.19 | INTEGER (0..65535) | read-write | mandatory |
| sensorHumidityRaw OBJECT-TYPE The unformatted, raw, A/D value in this sensor. Contains more resolution than the formated percentage. This number can go from 0 to 1023 depending on the input voltage | 1.3.6.1.4.1.3854.2.3.3.1.20 | INTEGER | read-only | mandatory |
| sensorHumidityOffset OBJECT-TYPE Humidity Offset reading | 1.3.6.1.4.1.3854.2.3.3.1.21 | INTEGER | read-write | mandatory |
| sensorHumidityPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.3.3.1.35 | INTEGER (0..65534) | read-only | mandatory |
| sensorHumiditySubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.3.3.1.36 | INTEGER (0..65534) | read-only | mandatory |
| sensorHumidityDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.3.3.1.37 | INTEGER (0..65534) | read-only | mandatory |
| sensorHumidityDisplayStyle OBJECT-TYPE Humidity display style | 1.3.6.1.4.1.3854.2.3.3.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| sensorHumidityHighCriticalDesc OBJECT-TYPE A HighCritical Description of this sensor | 1.3.6.1.4.1.3854.2.3.3.1.46 | DisplayString | read-write | mandatory |
| sensorHumidityLowCriticalDesc OBJECT-TYPE A LowCritical Description of this sensor | 1.3.6.1.4.1.3854.2.3.3.1.47 | DisplayString | read-write | mandatory |
| sensorHumidityNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.3.3.1.48 | DisplayString | read-write | mandatory |
| sensorHumidityLowWarningDesc OBJECT-TYPE A LowWarning Description of this sensor | 1.3.6.1.4.1.3854.2.3.3.1.49 | DisplayString | read-write | mandatory |
| sensorHumidityHighWarningDesc OBJECT-TYPE A HighWarning Description of this sensor | 1.3.6.1.4.1.3854.2.3.3.1.50 | DisplayString | read-write | mandatory |
| sensorHumiditySensorErrorDesc OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.3.3.1.51 | DisplayString | read-write | mandatory |
| sensorHumidityHighCriticalColor OBJECT-TYPE A HighCritical Color of this sensor | 1.3.6.1.4.1.3854.2.3.3.1.54 | INTEGER | read-write | mandatory |
| sensorHumidityLowCriticalColor OBJECT-TYPE A LowCritical Color of this sensor | 1.3.6.1.4.1.3854.2.3.3.1.55 | INTEGER | read-write | mandatory |
| sensorHumidityNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.3.3.1.56 | INTEGER | read-write | mandatory |
| sensorHumidityLowWarningColor OBJECT-TYPE A LowWarning Color of this sensor | 1.3.6.1.4.1.3854.2.3.3.1.57 | INTEGER | read-write | mandatory |
| sensorHumidityHighWarningColor OBJECT-TYPE A HighWarning Color of this sensor | 1.3.6.1.4.1.3854.2.3.3.1.58 | INTEGER | read-write | mandatory |
| sensorHumiditySensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.3.3.1.59 | INTEGER | read-write | mandatory |
| sensorHumidityAcknowledge OBJECT-TYPE Humidity sensor acknowledge | 1.3.6.1.4.1.3854.2.3.3.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| sensorHumidityId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.3.3.1.1000 | INTEGER | read-only | mandatory |
| sensorDryContactTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.3.4 | not-accessible | mandatory | |
| sensorDryContactEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.3.4.1 | not-accessible | mandatory | |
| sensorDryContactIndex OBJECT-TYPE The index into the Switch sensor table | 1.3.6.1.4.1.3854.2.3.4.1.1 | INTEGER (1..65535) | read-only | mandatory |
| sensorDryContactDescription OBJECT-TYPE A Description of this sensor Switch | 1.3.6.1.4.1.3854.2.3.4.1.2 | DisplayString | read-write | mandatory |
| sensorDryContactType OBJECT-TYPE Enter the type of this Sensor | 1.3.6.1.4.1.3854.2.3.4.1.3 | INTEGER {drycontact-inout(7), drycontact-input(8), drycontact-array(22)} | read-only | mandatory |
| sensorDryContactStatus OBJECT-TYPE The current status of this Sensor, only input switches have a status | 1.3.6.1.4.1.3854.2.3.4.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), outputLow(8), outputHigh(9)} | read-only | mandatory |
| sensorDryContactGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.3.4.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| sensorDryContactDirection OBJECT-TYPE To set a switch to input enter 0. To set a switch to output enter 1 | 1.3.6.1.4.1.3854.2.3.4.1.22 | INTEGER {input(0), output(1)} | read-write | mandatory |
| sensorDryContactNormalState OBJECT-TYPE The normal state of an input switch. If an input switch is in this state it is normal, else it is critical. An open switch senses +5 volts. A closed switch senses 0 volts. | 1.3.6.1.4.1.3854.2.3.4.1.23 | INTEGER {closed(0), open(1)} | read-write | mandatory |
| sensorDryContactControlMode OBJECT-TYPE Control Mode used for selecting the mode to control a sensor output. | 1.3.6.1.4.1.3854.2.3.4.1.24 | INTEGER {manual-control(0), sensor-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| sensorDryContactOutputManualCycleTime OBJECT-TYPE Toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.2.3.4.1.25 | INTEGER (1..255) | read-write | mandatory |
| sensorDryContactOutputManualAction OBJECT-TYPE Control the sensor output manualy | 1.3.6.1.4.1.3854.2.3.4.1.26 | INTEGER {low(0), high(1), cycle-Low-High-Low(2), cycle-High-Low-High(3)} | read-write | mandatory |
| sensorDryContactPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.3.4.1.35 | INTEGER (0..65534) | read-only | mandatory |
| sensorDryContactSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.3.4.1.36 | INTEGER (0..65534) | read-only | mandatory |
| sensorDryContactDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.3.4.1.37 | INTEGER (0..65534) | read-only | mandatory |
| sensorDryContactCriticalDesc OBJECT-TYPE A Critical Description of this sensor | 1.3.6.1.4.1.3854.2.3.4.1.46 | DisplayString | read-write | mandatory |
| sensorDryContactNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.3.4.1.48 | DisplayString | read-write | mandatory |
| sensorDryContactOnDesc OBJECT-TYPE A On Description of this sensor | 1.3.6.1.4.1.3854.2.3.4.1.52 | DisplayString | read-write | mandatory |
| sensorDryContactOffDesc OBJECT-TYPE A Off Description of this sensor | 1.3.6.1.4.1.3854.2.3.4.1.53 | DisplayString | read-write | mandatory |
| sensorDryContactCriticalColor OBJECT-TYPE A Critical Color of this sensor | 1.3.6.1.4.1.3854.2.3.4.1.54 | INTEGER | read-write | mandatory |
| sensorDryContactNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.3.4.1.56 | INTEGER | read-write | mandatory |
| sensorDryContactOnColor OBJECT-TYPE A On Color of this sensor | 1.3.6.1.4.1.3854.2.3.4.1.60 | INTEGER | read-write | mandatory |
| sensorDryContactOffColor OBJECT-TYPE A Off Color of this sensor | 1.3.6.1.4.1.3854.2.3.4.1.61 | INTEGER | read-write | mandatory |
| sensorDryContactAcknowledge OBJECT-TYPE Dry Contact sensor acknowledge | 1.3.6.1.4.1.3854.2.3.4.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| sensorDryContactId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.3.4.1.1000 | INTEGER | read-only | mandatory |
| sensor4to20mATable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.3.5 | not-accessible | mandatory | |
| sensor4to20mAEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.3.5.1 | not-accessible | mandatory | |
| sensor4to20mAIndex OBJECT-TYPE The index into the sensor table | 1.3.6.1.4.1.3854.2.3.5.1.1 | INTEGER (1..65535) | read-only | mandatory |
| sensor4to20mADescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.3.5.1.2 | DisplayString | read-write | mandatory |
| sensor4to20mAValue OBJECT-TYPE The reading value in this sensor | 1.3.6.1.4.1.3854.2.3.5.1.4 | INTEGER | read-only | mandatory |
| sensor4to20mAUnit OBJECT-TYPE The unit string | 1.3.6.1.4.1.3854.2.3.5.1.5 | DisplayString | read-write | mandatory |
| sensor4to20mAStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.2.3.5.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensor4to20mAGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.3.5.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| sensor4to20mALowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.3.5.1.9 | INTEGER | read-write | mandatory |
| sensor4to20mALowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.3.5.1.10 | INTEGER | read-write | mandatory |
| sensor4to20mAHighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.3.5.1.11 | INTEGER | read-write | mandatory |
| sensor4to20mAHighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.3.5.1.12 | INTEGER | read-write | mandatory |
| sensor4to20mARearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.2.3.5.1.13 | INTEGER | read-write | mandatory |
| sensor4to20mADelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.2.3.5.1.14 | INTEGER (0..65534) | read-write | mandatory |
| sensor4to20mADelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.2.3.5.1.15 | INTEGER (0..65534) | read-write | mandatory |
| sensor4to20mADelayLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.3.5.1.16 | INTEGER (0..65535) | read-write | mandatory |
| sensor4to20mADelayLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.3.5.1.17 | INTEGER (0..65535) | read-write | mandatory |
| sensor4to20mADelayHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.3.5.1.18 | INTEGER (0..65535) | read-write | mandatory |
| sensor4to20mADelayHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.3.5.1.19 | INTEGER (0..65535) | read-write | mandatory |
| sensor4to20mARaw OBJECT-TYPE The unformatted, raw, A/D value in this sensor. Contains more resolution than the formated percentage. This number can go from 0 to 1023 depending on the input voltage | 1.3.6.1.4.1.3854.2.3.5.1.20 | INTEGER | read-only | mandatory |
| sensor4to20mAOffset OBJECT-TYPE 4to20mA Offset reading | 1.3.6.1.4.1.3854.2.3.5.1.21 | INTEGER | read-write | mandatory |
| sensor4to20mAAmountMaxVoltage OBJECT-TYPE The maximum scale of 4to20mA conversion. | 1.3.6.1.4.1.3854.2.3.5.1.33 | INTEGER | read-write | mandatory |
| sensor4to20mAAmountBaseVoltage OBJECT-TYPE The base scale of 4to20mA conversion. | 1.3.6.1.4.1.3854.2.3.5.1.34 | INTEGER | read-write | mandatory |
| sensor4to20mAPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.3.5.1.35 | INTEGER (0..65534) | read-only | mandatory |
| sensor4to20mASubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.3.5.1.36 | INTEGER (0..65534) | read-only | mandatory |
| sensor4to20mADeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.3.5.1.37 | INTEGER (0..65534) | read-only | mandatory |
| sensor4to20mAMaxVoltage OBJECT-TYPE The max range for use in conversion. | 1.3.6.1.4.1.3854.2.3.5.1.43 | INTEGER | read-write | mandatory |
| sensor4to20mABaseVoltage OBJECT-TYPE The base range for use in conversion. | 1.3.6.1.4.1.3854.2.3.5.1.44 | INTEGER | read-write | mandatory |
| sensor4to20mADisplayStyle OBJECT-TYPE 4to20mA display style | 1.3.6.1.4.1.3854.2.3.5.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| sensor4to20mAHighCriticalDesc OBJECT-TYPE A HighCritical Description of this sensor | 1.3.6.1.4.1.3854.2.3.5.1.46 | DisplayString | read-write | mandatory |
| sensor4to20mALowCriticalDesc OBJECT-TYPE A LowCritical Description of this sensor | 1.3.6.1.4.1.3854.2.3.5.1.47 | DisplayString | read-write | mandatory |
| sensor4to20mANormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.3.5.1.48 | DisplayString | read-write | mandatory |
| sensor4to20mALowWarningDesc OBJECT-TYPE A LowWarning Description of this sensor | 1.3.6.1.4.1.3854.2.3.5.1.49 | DisplayString | read-write | mandatory |
| sensor4to20mAHighWarningDesc OBJECT-TYPE A HighWarning Description of this sensor | 1.3.6.1.4.1.3854.2.3.5.1.50 | DisplayString | read-write | mandatory |
| sensor4to20mASensorErrorDesc OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.3.5.1.51 | DisplayString | read-write | mandatory |
| sensor4to20mAHighCriticalColor OBJECT-TYPE A HighCritical Color of this sensor | 1.3.6.1.4.1.3854.2.3.5.1.54 | INTEGER | read-write | mandatory |
| sensor4to20mALowCriticalColor OBJECT-TYPE A LowCritical Color of this sensor | 1.3.6.1.4.1.3854.2.3.5.1.55 | INTEGER | read-write | mandatory |
| sensor4to20mANormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.3.5.1.56 | INTEGER | read-write | mandatory |
| sensor4to20mALowWarningColor OBJECT-TYPE A LowWarning Color of this sensor | 1.3.6.1.4.1.3854.2.3.5.1.57 | INTEGER | read-write | mandatory |
| sensor4to20mAHighWarningColor OBJECT-TYPE A HighWarning Color of this sensor | 1.3.6.1.4.1.3854.2.3.5.1.58 | INTEGER | read-write | mandatory |
| sensor4to20mASensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.3.5.1.59 | INTEGER | read-write | mandatory |
| sensor4to20mASensorAcknowledge OBJECT-TYPE 4to20mA sensor acknowledge | 1.3.6.1.4.1.3854.2.3.5.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| sensor4to20mAId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.3.5.1.1000 | INTEGER | read-only | mandatory |
| sensorDCvoltageTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.3.6 | not-accessible | mandatory | |
| sensorDCvoltageEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.3.6.1 | not-accessible | mandatory | |
| sensorDCvoltageIndex OBJECT-TYPE The index into the sensor table | 1.3.6.1.4.1.3854.2.3.6.1.1 | INTEGER (1..65535) | read-only | mandatory |
| sensorDCvoltageDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.3.6.1.2 | DisplayString | read-write | mandatory |
| sensorDCvoltageValue OBJECT-TYPE The reading value in this sensor | 1.3.6.1.4.1.3854.2.3.6.1.4 | INTEGER | read-only | mandatory |
| sensorDCvoltageUnit OBJECT-TYPE The unit string | 1.3.6.1.4.1.3854.2.3.6.1.5 | DisplayString | read-write | mandatory |
| sensorDCvoltageStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.2.3.6.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorDCvoltageGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.3.6.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| sensorDCvoltageLowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.3.6.1.9 | INTEGER | read-write | mandatory |
| sensorDCvoltageLowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.3.6.1.10 | INTEGER | read-write | mandatory |
| sensorDCvoltageHighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.3.6.1.11 | INTEGER | read-write | mandatory |
| sensorDCvoltageHighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.3.6.1.12 | INTEGER | read-write | mandatory |
| sensorDCvoltageRearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.2.3.6.1.13 | INTEGER | read-write | mandatory |
| sensorDCvoltageDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.2.3.6.1.14 | INTEGER (0..65534) | read-write | mandatory |
| sensorDCvoltageDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.2.3.6.1.15 | INTEGER (0..65534) | read-write | mandatory |
| sensorDCvoltageDelayLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.3.6.1.16 | INTEGER (0..65535) | read-write | mandatory |
| sensorDCvoltageDelayLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.3.6.1.17 | INTEGER (0..65535) | read-write | mandatory |
| sensorDCvoltageDelayHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.3.6.1.18 | INTEGER (0..65535) | read-write | mandatory |
| sensorDCvoltageDelayHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.3.6.1.19 | INTEGER (0..65535) | read-write | mandatory |
| sensorDCvoltageRaw OBJECT-TYPE The unformatted, raw, A/D value in this sensor. Contains more resolution than the formated percentage. This number can go from 0 to 1023 depending on the input voltage | 1.3.6.1.4.1.3854.2.3.6.1.20 | INTEGER | read-only | mandatory |
| sensorDCvoltageOffset OBJECT-TYPE DC voltage Offset reading | 1.3.6.1.4.1.3854.2.3.6.1.21 | INTEGER | read-write | mandatory |
| sensorDCvoltageJumper OBJECT-TYPE Selected voltage scale (jumper 0) in DC voltage conversion. | 1.3.6.1.4.1.3854.2.3.6.1.32 | INTEGER {jumperAt-60(-600), jumperAt-40(-400), jumperAt-30(-300), jumperAt-20(-200), jumperAt-10(-100), jumperAt10(100), jumperAt20(200), jumperAt30(300), jumperAt40(400), jumperAt60(600)} | read-write | mandatory |
| sensorDCvoltageAmountMaxVoltage OBJECT-TYPE The maximum scale of DC voltage conversion. | 1.3.6.1.4.1.3854.2.3.6.1.33 | INTEGER | read-write | mandatory |
| sensorDCvoltageAmountBaseVoltage OBJECT-TYPE The base scale of DC voltage conversion. | 1.3.6.1.4.1.3854.2.3.6.1.34 | INTEGER | read-write | mandatory |
| sensorDCvoltagePort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.3.6.1.35 | INTEGER (0..65534) | read-only | mandatory |
| sensorDCvoltageSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.3.6.1.36 | INTEGER (0..65534) | read-only | mandatory |
| sensorDCvoltageDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.3.6.1.37 | INTEGER (0..65534) | read-only | mandatory |
| sensorDCvoltageMaxVoltage OBJECT-TYPE The max voltage range for use in conversion. | 1.3.6.1.4.1.3854.2.3.6.1.43 | INTEGER | read-write | mandatory |
| sensorDCvoltageBaseVoltage OBJECT-TYPE The base voltage range for use in conversion. | 1.3.6.1.4.1.3854.2.3.6.1.44 | INTEGER | read-write | mandatory |
| sensorDCvoltageDisplayStyle OBJECT-TYPE DCVoltage display style | 1.3.6.1.4.1.3854.2.3.6.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| sensorDCvoltageHighCriticalDesc OBJECT-TYPE A HighCritical Description of this sensor | 1.3.6.1.4.1.3854.2.3.6.1.46 | DisplayString | read-write | mandatory |
| sensorDCvoltageLowCriticalDesc OBJECT-TYPE A LowCritical Description of this sensor | 1.3.6.1.4.1.3854.2.3.6.1.47 | DisplayString | read-write | mandatory |
| sensorDCvoltageNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.3.6.1.48 | DisplayString | read-write | mandatory |
| sensorDCvoltageLowWarningDesc OBJECT-TYPE A LowWarning Description of this sensor | 1.3.6.1.4.1.3854.2.3.6.1.49 | DisplayString | read-write | mandatory |
| sensorDCvoltageHighWarningDesc OBJECT-TYPE A HighWarning Description of this sensor | 1.3.6.1.4.1.3854.2.3.6.1.50 | DisplayString | read-write | mandatory |
| sensorDCvoltageSensorErrorDesc OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.3.6.1.51 | DisplayString | read-write | mandatory |
| sensorDCvoltageHighCriticalColor OBJECT-TYPE A HighCritical Color of this sensor | 1.3.6.1.4.1.3854.2.3.6.1.54 | INTEGER | read-write | mandatory |
| sensorDCvoltageLowCriticalColor OBJECT-TYPE A LowCritical Color of this sensor | 1.3.6.1.4.1.3854.2.3.6.1.55 | INTEGER | read-write | mandatory |
| sensorDCvoltageNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.3.6.1.56 | INTEGER | read-write | mandatory |
| sensorDCvoltageLowWarningColor OBJECT-TYPE A LowWarning Color of this sensor | 1.3.6.1.4.1.3854.2.3.6.1.57 | INTEGER | read-write | mandatory |
| sensorDCvoltageHighWarningColor OBJECT-TYPE A HighWarning Color of this sensor | 1.3.6.1.4.1.3854.2.3.6.1.58 | INTEGER | read-write | mandatory |
| sensorDCvoltageSensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.3.6.1.59 | INTEGER | read-write | mandatory |
| sensorDCvoltageAcknowledge OBJECT-TYPE DCvoltage sensor acknowledge | 1.3.6.1.4.1.3854.2.3.6.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| sensorDCvoltageId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.3.6.1.1000 | INTEGER | read-only | mandatory |
| sensorAirflowTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.3.7 | not-accessible | mandatory | |
| sensorAirflowEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.3.7.1 | not-accessible | mandatory | |
| sensorAirflowIndex OBJECT-TYPE The index into the Switch sensor table | 1.3.6.1.4.1.3854.2.3.7.1.1 | INTEGER (1..65535) | read-only | mandatory |
| sensorAirflowDescription OBJECT-TYPE A Description of this sensor Switch | 1.3.6.1.4.1.3854.2.3.7.1.2 | DisplayString | read-write | mandatory |
| sensorAirflowValue OBJECT-TYPE The reading value in this sensor | 1.3.6.1.4.1.3854.2.3.7.1.4 | INTEGER | read-only | mandatory |
| sensorAirflowStatus OBJECT-TYPE The current status of this Sensor, only input switches have a status | 1.3.6.1.4.1.3854.2.3.7.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorAirflowGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.3.7.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| sensorAirflowLowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.3.7.1.9 | INTEGER | read-write | mandatory |
| sensorAirflowLowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.3.7.1.10 | INTEGER | read-write | mandatory |
| sensorAirflowHighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.3.7.1.11 | INTEGER | read-write | mandatory |
| sensorAirflowHighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.3.7.1.12 | INTEGER | read-write | mandatory |
| sensorAirflowRearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.2.3.7.1.13 | INTEGER | read-write | mandatory |
| sensorAirflowDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.2.3.7.1.14 | INTEGER (0..65534) | read-write | mandatory |
| sensorAirflowDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.2.3.7.1.15 | INTEGER (0..65534) | read-write | mandatory |
| sensorAirflowDelayLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.3.7.1.16 | INTEGER (0..65535) | read-write | mandatory |
| sensorAirflowDelayLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.3.7.1.17 | INTEGER (0..65535) | read-write | mandatory |
| sensorAirflowDelayHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.3.7.1.18 | INTEGER (0..65535) | read-write | mandatory |
| sensorAirflowDelayHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.3.7.1.19 | INTEGER (0..65535) | read-write | mandatory |
| sensorAirflowRaw OBJECT-TYPE The unformatted, raw, A/D value in this sensor. Contains more resolution than the formated percentage. This number can go from 0 to 1023 depending on the input voltage | 1.3.6.1.4.1.3854.2.3.7.1.20 | INTEGER | read-only | mandatory |
| sensorAirflowPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.3.7.1.35 | INTEGER (0..65534) | read-only | mandatory |
| sensorAirflowSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.3.7.1.36 | INTEGER (0..65534) | read-only | mandatory |
| sensorAirflowDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.3.7.1.37 | INTEGER (0..65534) | read-only | mandatory |
| sensorAirflowDisplayStyle OBJECT-TYPE Airflow display style | 1.3.6.1.4.1.3854.2.3.7.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| sensorAirflowHighCriticalDesc OBJECT-TYPE A HighCritical Description of this sensor | 1.3.6.1.4.1.3854.2.3.7.1.46 | DisplayString | read-write | mandatory |
| sensorAirflowLowCriticalDesc OBJECT-TYPE A LowCritical Description of this sensor | 1.3.6.1.4.1.3854.2.3.7.1.47 | DisplayString | read-write | mandatory |
| sensorAirflowNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.3.7.1.48 | DisplayString | read-write | mandatory |
| sensorAirflowLowWarningDesc OBJECT-TYPE A LowWarning Description of this sensor | 1.3.6.1.4.1.3854.2.3.7.1.49 | DisplayString | read-write | mandatory |
| sensorAirflowHighWarningDesc OBJECT-TYPE A HighWarning Description of this sensor | 1.3.6.1.4.1.3854.2.3.7.1.50 | DisplayString | read-write | mandatory |
| sensorAirflowSensorErrorDesc OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.3.7.1.51 | DisplayString | read-write | mandatory |
| sensorAirflowHighCriticalColor OBJECT-TYPE A HighCritical Color of this sensor | 1.3.6.1.4.1.3854.2.3.7.1.54 | INTEGER | read-write | mandatory |
| sensorAirflowLowCriticalColor OBJECT-TYPE A LowCritical Color of this sensor | 1.3.6.1.4.1.3854.2.3.7.1.55 | INTEGER | read-write | mandatory |
| sensorAirflowNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.3.7.1.56 | INTEGER | read-write | mandatory |
| sensorAirflowLowWarningColor OBJECT-TYPE A LowWarning Color of this sensor | 1.3.6.1.4.1.3854.2.3.7.1.57 | INTEGER | read-write | mandatory |
| sensorAirflowHighWarningColor OBJECT-TYPE A HighWarning Color of this sensor | 1.3.6.1.4.1.3854.2.3.7.1.58 | INTEGER | read-write | mandatory |
| sensorAirflowSensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.3.7.1.59 | INTEGER | read-write | mandatory |
| sensorAirflowAcknowledge OBJECT-TYPE Airflow sensor acknowledge | 1.3.6.1.4.1.3854.2.3.7.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| sensorAirflowId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.3.7.1.1000 | INTEGER | read-only | mandatory |
| sensorMotionTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.3.8 | not-accessible | mandatory | |
| sensorMotionEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.3.8.1 | not-accessible | mandatory | |
| sensorMotionIndex OBJECT-TYPE The index into the Switch sensor table | 1.3.6.1.4.1.3854.2.3.8.1.1 | INTEGER (1..65535) | read-only | mandatory |
| sensorMotionDescription OBJECT-TYPE A Description of this sensor Switch | 1.3.6.1.4.1.3854.2.3.8.1.2 | DisplayString | read-write | mandatory |
| sensorMotionStatus OBJECT-TYPE The current status of this Sensor, only input switches have a status | 1.3.6.1.4.1.3854.2.3.8.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorMotionGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.3.8.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| sensorMotionPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.3.8.1.35 | INTEGER (0..65534) | read-only | mandatory |
| sensorMotionSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.3.8.1.36 | INTEGER (0..65534) | read-only | mandatory |
| sensorMotionDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.3.8.1.37 | INTEGER (0..65534) | read-only | mandatory |
| sensorMotionCriticalDesc OBJECT-TYPE A Critical Description of this sensor | 1.3.6.1.4.1.3854.2.3.8.1.46 | DisplayString | read-write | mandatory |
| sensorMotionNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.3.8.1.48 | DisplayString | read-write | mandatory |
| sensorMotionCriticalColor OBJECT-TYPE A Critical Color of this sensor | 1.3.6.1.4.1.3854.2.3.8.1.54 | INTEGER | read-write | mandatory |
| sensorMotionNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.3.8.1.56 | INTEGER | read-write | mandatory |
| sensorMotionAcknowledge OBJECT-TYPE Motion sensor acknowledge | 1.3.6.1.4.1.3854.2.3.8.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| sensorMotionId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.3.8.1.1000 | INTEGER | read-only | mandatory |
| sensorWaterTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.3.9 | not-accessible | mandatory | |
| sensorWaterEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.3.9.1 | not-accessible | mandatory | |
| sensorWaterIndex OBJECT-TYPE The index into the Switch sensor table | 1.3.6.1.4.1.3854.2.3.9.1.1 | INTEGER (1..65535) | read-only | mandatory |
| sensorWaterDescription OBJECT-TYPE A Description of this sensor Switch | 1.3.6.1.4.1.3854.2.3.9.1.2 | DisplayString | read-write | mandatory |
| sensorWaterStatus OBJECT-TYPE The current status of this Sensor, only input switches have a status | 1.3.6.1.4.1.3854.2.3.9.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorWaterGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.3.9.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| sensorWaterPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.3.9.1.35 | INTEGER (0..65534) | read-only | mandatory |
| sensorWaterSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.3.9.1.36 | INTEGER (0..65534) | read-only | mandatory |
| sensorWaterDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.3.9.1.37 | INTEGER (0..65534) | read-only | mandatory |
| sensorWaterCriticalDesc OBJECT-TYPE A Critical Description of this sensor | 1.3.6.1.4.1.3854.2.3.9.1.46 | DisplayString | read-write | mandatory |
| sensorWaterNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.3.9.1.48 | DisplayString | read-write | mandatory |
| sensorWaterCriticalColor OBJECT-TYPE A Critical Color of this sensor | 1.3.6.1.4.1.3854.2.3.9.1.54 | INTEGER | read-write | mandatory |
| sensorWaterNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.3.9.1.56 | INTEGER | read-write | mandatory |
| sensorWaterAcknowledge OBJECT-TYPE Water sensor acknowledge | 1.3.6.1.4.1.3854.2.3.9.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| sensorWaterId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.3.9.1.1000 | INTEGER | read-only | mandatory |
| sensorSecurityTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.3.10 | not-accessible | mandatory | |
| sensorSecurityEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.3.10.1 | not-accessible | mandatory | |
| sensorSecurityIndex OBJECT-TYPE The index into the Switch sensor table | 1.3.6.1.4.1.3854.2.3.10.1.1 | INTEGER (1..65535) | read-only | mandatory |
| sensorSecurityDescription OBJECT-TYPE A Description of this sensor Switch | 1.3.6.1.4.1.3854.2.3.10.1.2 | DisplayString | read-write | mandatory |
| sensorSecurityStatus OBJECT-TYPE The current status of this Sensor, only input switches have a status | 1.3.6.1.4.1.3854.2.3.10.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorSecurityGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.3.10.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| sensorSecurityPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.3.10.1.35 | INTEGER (0..65534) | read-only | mandatory |
| sensorSecuritySubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.3.10.1.36 | INTEGER (0..65534) | read-only | mandatory |
| sensorSecurityDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.3.10.1.37 | INTEGER (0..65534) | read-only | mandatory |
| sensorSecurityCriticalDesc OBJECT-TYPE A Critical Description of this sensor | 1.3.6.1.4.1.3854.2.3.10.1.46 | DisplayString | read-write | mandatory |
| sensorSecurityNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.3.10.1.48 | DisplayString | read-write | mandatory |
| sensorSecurityCriticalColor OBJECT-TYPE A Critical Color of this sensor | 1.3.6.1.4.1.3854.2.3.10.1.54 | INTEGER | read-write | mandatory |
| sensorSecurityNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.3.10.1.56 | INTEGER | read-write | mandatory |
| sensorSecurityAcknowledge OBJECT-TYPE Security sensor acknowledge | 1.3.6.1.4.1.3854.2.3.10.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| sensorSecurityId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.3.10.1.1000 | INTEGER | read-only | mandatory |
| sensorSirenTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.3.11 | not-accessible | mandatory | |
| sensorSirenEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.3.11.1 | not-accessible | mandatory | |
| sensorSirenIndex OBJECT-TYPE The index into the Switch sensor table | 1.3.6.1.4.1.3854.2.3.11.1.1 | INTEGER (1..65535) | read-only | mandatory |
| sensorSirenDescription OBJECT-TYPE A Description of this sensor Switch | 1.3.6.1.4.1.3854.2.3.11.1.2 | DisplayString | read-write | mandatory |
| sensorSirenStatus OBJECT-TYPE The current status of this Sensor, only input switches have a status | 1.3.6.1.4.1.3854.2.3.11.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorSirenGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.3.11.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| sensorSirenControlMode OBJECT-TYPE Control Mode used for selecting the mode to control a siren. | 1.3.6.1.4.1.3854.2.3.11.1.24 | INTEGER {manual-control(0), sensor-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| sensorSirenManualCycleTime OBJECT-TYPE Toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.2.3.11.1.25 | INTEGER (1..255) | read-write | mandatory |
| sensorSirenManualAction OBJECT-TYPE Control the siren manualy | 1.3.6.1.4.1.3854.2.3.11.1.26 | INTEGER {turn-On(0), turn-Off(1), cycle-On-Off-On(2), cycle-Off-On-Off(3)} | read-write | mandatory |
| sensorSirenPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.3.11.1.35 | INTEGER (0..65534) | read-only | mandatory |
| sensorSirenSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.3.11.1.36 | INTEGER (0..65534) | read-only | mandatory |
| sensorSirenDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.3.11.1.37 | INTEGER (0..65534) | read-only | mandatory |
| sensorSirenOnDesc OBJECT-TYPE A On Description of this sensor | 1.3.6.1.4.1.3854.2.3.11.1.52 | DisplayString | read-write | mandatory |
| sensorSirenOffDesc OBJECT-TYPE A Off Description of this sensor | 1.3.6.1.4.1.3854.2.3.11.1.53 | DisplayString | read-write | mandatory |
| sensorSirenOnColor OBJECT-TYPE A On Color of this sensor | 1.3.6.1.4.1.3854.2.3.11.1.60 | INTEGER | read-write | mandatory |
| sensorSirenOffColor OBJECT-TYPE A Off Color of this sensor | 1.3.6.1.4.1.3854.2.3.11.1.61 | INTEGER | read-write | mandatory |
| sensorSirenAcknowledge OBJECT-TYPE Siren sensor acknowledge | 1.3.6.1.4.1.3854.2.3.11.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| sensorSirenId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.3.11.1.1000 | INTEGER | read-only | mandatory |
| sensorRelayTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.3.12 | not-accessible | mandatory | |
| sensorRelayEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.3.12.1 | not-accessible | mandatory | |
| sensorRelayIndex OBJECT-TYPE The index into the Switch sensor table | 1.3.6.1.4.1.3854.2.3.12.1.1 | INTEGER (1..65535) | read-only | mandatory |
| sensorRelayDescription OBJECT-TYPE A Description of this sensor Switch | 1.3.6.1.4.1.3854.2.3.12.1.2 | DisplayString | read-write | mandatory |
| sensorRelayType OBJECT-TYPE Enter the type of this Sensor | 1.3.6.1.4.1.3854.2.3.12.1.3 | INTEGER {relay(13), xrelay(19)} | read-only | mandatory |
| sensorRelayStatus OBJECT-TYPE The current status of this Sensor, only input switches have a status | 1.3.6.1.4.1.3854.2.3.12.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorRelayGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.3.12.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| sensorRelayControlMode OBJECT-TYPE Control Mode used for selecting the mode to control a relay. | 1.3.6.1.4.1.3854.2.3.12.1.24 | INTEGER {manual-control(0), sensor-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| sensorRelayManualCycleTime OBJECT-TYPE Toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.2.3.12.1.25 | INTEGER (1..255) | read-write | mandatory |
| sensorRelayManualAction OBJECT-TYPE Control the relay manualy | 1.3.6.1.4.1.3854.2.3.12.1.26 | INTEGER {turn-On(0), turn-Off(1), cycle-On-Off-On(2), cycle-Off-On-Off(3)} | read-write | mandatory |
| sensorRelayPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.3.12.1.35 | INTEGER (0..65534) | read-only | mandatory |
| sensorRelaySubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.3.12.1.36 | INTEGER (0..65534) | read-only | mandatory |
| sensorRelayDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.3.12.1.37 | INTEGER (0..65534) | read-only | mandatory |
| sensorRelayOnDesc OBJECT-TYPE A On Description of this sensor | 1.3.6.1.4.1.3854.2.3.12.1.52 | DisplayString | read-write | mandatory |
| sensorRelayOffDesc OBJECT-TYPE A Off Description of this sensor | 1.3.6.1.4.1.3854.2.3.12.1.53 | DisplayString | read-write | mandatory |
| sensorRelayOnColor OBJECT-TYPE A On Color of this sensor | 1.3.6.1.4.1.3854.2.3.12.1.60 | INTEGER | read-write | mandatory |
| sensorRelayOffColor OBJECT-TYPE A Off Color of this sensor | 1.3.6.1.4.1.3854.2.3.12.1.61 | INTEGER | read-write | mandatory |
| sensorRelayAcknowledge OBJECT-TYPE Relay sensor acknowledge | 1.3.6.1.4.1.3854.2.3.12.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| sensorRelayId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.3.12.1.1000 | INTEGER | read-only | mandatory |
| sensorACvoltageTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.3.13 | not-accessible | mandatory | |
| sensorACvoltageEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.3.13.1 | not-accessible | mandatory | |
| sensorACvoltageIndex OBJECT-TYPE The index into the Switch sensor table | 1.3.6.1.4.1.3854.2.3.13.1.1 | INTEGER (1..65535) | read-only | mandatory |
| sensorACvoltageDescription OBJECT-TYPE A Description of this sensor Switch | 1.3.6.1.4.1.3854.2.3.13.1.2 | DisplayString | read-write | mandatory |
| sensorACvoltageStatus OBJECT-TYPE The current status of this Sensor, only input switches have a status | 1.3.6.1.4.1.3854.2.3.13.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorACvoltageGoOffline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.2.3.13.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| sensorACvoltagePort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.3.13.1.35 | INTEGER (0..65534) | read-only | mandatory |
| sensorACvoltageSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.3.13.1.36 | INTEGER (0..65534) | read-only | mandatory |
| sensorACvoltageDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.3.13.1.37 | INTEGER (0..65534) | read-only | mandatory |
| sensorACvoltageCriticalDesc OBJECT-TYPE A Critical Description of this sensor | 1.3.6.1.4.1.3854.2.3.13.1.46 | DisplayString | read-write | mandatory |
| sensorACvoltageNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.3.13.1.48 | DisplayString | read-write | mandatory |
| sensorACvoltageCriticalColor OBJECT-TYPE A Critical Color of this sensor | 1.3.6.1.4.1.3854.2.3.13.1.54 | INTEGER | read-write | mandatory |
| sensorACvoltageNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.3.13.1.56 | INTEGER | read-write | mandatory |
| sensorACvoltageAcknowledge OBJECT-TYPE ACvoltage sensor acknowledge | 1.3.6.1.4.1.3854.2.3.13.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| sensorACvoltageId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.3.13.1.1000 | INTEGER | read-only | mandatory |
| sensorSmokeTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.3.14 | not-accessible | mandatory | |
| sensorSmokeEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.3.14.1 | not-accessible | mandatory | |
| sensorSmokeIndex OBJECT-TYPE The index into the Switch sensor table | 1.3.6.1.4.1.3854.2.3.14.1.1 | INTEGER (1..65535) | read-only | mandatory |
| sensorSmokeDescription OBJECT-TYPE A Description of this sensor Switch | 1.3.6.1.4.1.3854.2.3.14.1.2 | DisplayString | read-write | mandatory |
| sensorSmokeStatus OBJECT-TYPE The current status of this Sensor, only input switches have a status | 1.3.6.1.4.1.3854.2.3.14.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sensorSmokeGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.3.14.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| sensorSmokePort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.3.14.1.35 | INTEGER (0..65534) | read-only | mandatory |
| sensorSmokeSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.3.14.1.36 | INTEGER (0..65534) | read-only | mandatory |
| sensorSmokeDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.3.14.1.37 | INTEGER (0..65534) | read-only | mandatory |
| sensorSmokeCriticalDesc OBJECT-TYPE A Critical Description of this sensor | 1.3.6.1.4.1.3854.2.3.14.1.46 | DisplayString | read-write | mandatory |
| sensorSmokeNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.3.14.1.48 | DisplayString | read-write | mandatory |
| sensorSmokeCriticalColor OBJECT-TYPE A Critical Color of this sensor | 1.3.6.1.4.1.3854.2.3.14.1.54 | INTEGER | read-write | mandatory |
| sensorSmokeNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.3.14.1.56 | INTEGER | read-write | mandatory |
| sensorSmokeAcknowledge OBJECT-TYPE Smoke sensor acknowledge | 1.3.6.1.4.1.3854.2.3.14.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| sensorSmokeId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.3.14.1.1000 | INTEGER | read-only | mandatory |
| sensorThermostatTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.3.20 | not-accessible | mandatory | |
| sensorThermostatEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.3.20.1 | not-accessible | mandatory | |
| sensorThermostatIndex OBJECT-TYPE The index into the sensor table | 1.3.6.1.4.1.3854.2.3.20.1.1 | INTEGER (1..65535) | read-only | mandatory |
| sensorThermostatDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.3.20.1.2 | DisplayString | read-write | mandatory |
| sensorThermostatDegree OBJECT-TYPE The degrees in this sensor | 1.3.6.1.4.1.3854.2.3.20.1.4 | INTEGER | read-only | mandatory |
| sensorThermostatStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.2.3.20.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorThermostatGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.3.20.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| sensorThermostatLowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.3.20.1.9 | INTEGER | read-write | mandatory |
| sensorThermostatLowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.3.20.1.10 | INTEGER | read-write | mandatory |
| sensorThermostatHighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.3.20.1.11 | INTEGER | read-write | mandatory |
| sensorThermostatHighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.3.20.1.12 | INTEGER | read-write | mandatory |
| sensorThermostatRearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.2.3.20.1.13 | INTEGER | read-write | mandatory |
| sensorThermostatDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.2.3.20.1.14 | INTEGER (0..65534) | read-write | mandatory |
| sensorThermostatDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.2.3.20.1.15 | INTEGER (0..65534) | read-write | mandatory |
| sensorThermostatDelayLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.3.20.1.16 | INTEGER (0..65535) | read-write | mandatory |
| sensorThermostatDelayLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.3.20.1.17 | INTEGER (0..65535) | read-write | mandatory |
| sensorThermostatDelayHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.3.20.1.18 | INTEGER (0..65535) | read-write | mandatory |
| sensorThermostatDelayHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.3.20.1.19 | INTEGER (0..65535) | read-write | mandatory |
| sensorThermostatPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.3.20.1.35 | INTEGER (0..65534) | read-only | mandatory |
| sensorThermostatSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.3.20.1.36 | INTEGER (0..65534) | read-only | mandatory |
| sensorThermostatDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.3.20.1.37 | INTEGER (0..65534) | read-only | mandatory |
| sensorThermostatDisplayStyle OBJECT-TYPE Thermostat display style | 1.3.6.1.4.1.3854.2.3.20.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| sensorThermostatHighCriticalDesc OBJECT-TYPE A HighCritical Description of this sensor | 1.3.6.1.4.1.3854.2.3.20.1.46 | DisplayString | read-write | mandatory |
| sensorThermostatLowCriticalDesc OBJECT-TYPE A LowCritical Description of this sensor | 1.3.6.1.4.1.3854.2.3.20.1.47 | DisplayString | read-write | mandatory |
| sensorThermostatNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.3.20.1.48 | DisplayString | read-write | mandatory |
| sensorThermostatLowWarningDesc OBJECT-TYPE A LowWarning Description of this sensor | 1.3.6.1.4.1.3854.2.3.20.1.49 | DisplayString | read-write | mandatory |
| sensorThermostatHighWarningDesc OBJECT-TYPE A HighWarning Description of this sensor | 1.3.6.1.4.1.3854.2.3.20.1.50 | DisplayString | read-write | mandatory |
| sensorThermostatSensorErrorDesc OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.3.20.1.51 | DisplayString | read-write | mandatory |
| sensorThermostatHighCriticalColor OBJECT-TYPE A HighCritical Color of this sensor | 1.3.6.1.4.1.3854.2.3.20.1.54 | INTEGER | read-write | mandatory |
| sensorThermostatLowCriticalColor OBJECT-TYPE A LowCritical Color of this sensor | 1.3.6.1.4.1.3854.2.3.20.1.55 | INTEGER | read-write | mandatory |
| sensorThermostatNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.3.20.1.56 | INTEGER | read-write | mandatory |
| sensorThermostatLowWarningColor OBJECT-TYPE A LowWarning Color of this sensor | 1.3.6.1.4.1.3854.2.3.20.1.57 | INTEGER | read-write | mandatory |
| sensorThermostatHighWarningColor OBJECT-TYPE A HighWarning Color of this sensor | 1.3.6.1.4.1.3854.2.3.20.1.58 | INTEGER | read-write | mandatory |
| sensorThermostatSensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.3.20.1.59 | INTEGER | read-write | mandatory |
| sensorThermostatAcknowledge OBJECT-TYPE Thermostat sensor acknowledge | 1.3.6.1.4.1.3854.2.3.20.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| sensorThermostatId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.3.20.1.1000 | INTEGER | read-only | mandatory |
| sensorWaterRopeTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.3.21 | not-accessible | mandatory | |
| sensorWaterRopeEntry OBJECT-TYPE This is an entry in the SensorWaterRopeEntry Table | 1.3.6.1.4.1.3854.2.3.21.1 | not-accessible | mandatory | |
| sensorWaterRopeIndex OBJECT-TYPE The index into the sensor table | 1.3.6.1.4.1.3854.2.3.21.1.1 | INTEGER (1..65535) | read-only | mandatory |
| sensorWaterRopeDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.3.21.1.2 | DisplayString | read-write | mandatory |
| sensorWaterRopeLeakLocation OBJECT-TYPE Location of leakage of water rope sensor. | 1.3.6.1.4.1.3854.2.3.21.1.4 | INTEGER | read-only | mandatory |
| sensorWaterRopeUnit OBJECT-TYPE Display unit of water rope sensor. | 1.3.6.1.4.1.3854.2.3.21.1.5 | DisplayString | read-write | mandatory |
| sensorWaterRopeStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.2.3.21.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), sensorError(7)} | read-only | mandatory |
| sensorWaterRopeGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.3.21.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| sensorWaterRopeRaw OBJECT-TYPE Raw value of location or length in ohms | 1.3.6.1.4.1.3854.2.3.21.1.20 | INTEGER | read-only | mandatory |
| sensorWaterRopeDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.3.21.1.37 | INTEGER (0..65534) | read-only | mandatory |
| sensorWaterRopeCriticalDesc OBJECT-TYPE A Critical Description of this sensor | 1.3.6.1.4.1.3854.2.3.21.1.46 | DisplayString | read-write | mandatory |
| sensorWaterRopeNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.3.21.1.48 | DisplayString | read-write | mandatory |
| sensorWaterRopeSensorErrorDesc OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.3.21.1.51 | DisplayString | read-write | mandatory |
| sensorWaterRopeCriticalColor OBJECT-TYPE A Critical Color of this sensor | 1.3.6.1.4.1.3854.2.3.21.1.54 | INTEGER | read-write | mandatory |
| sensorWaterRopeNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.3.21.1.56 | INTEGER | read-write | mandatory |
| sensorWaterRopeSensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.3.21.1.59 | INTEGER | read-write | mandatory |
| sensorWaterRopeAcknowledge OBJECT-TYPE Water Rope sensor acknowledge | 1.3.6.1.4.1.3854.2.3.21.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| sensorWaterRopeLength OBJECT-TYPE Length of water rope sensor. | 1.3.6.1.4.1.3854.2.3.21.1.100 | INTEGER | read-only | mandatory |
| sensorWaterRopeImpedance OBJECT-TYPE Sensing wire impedance per meter value times 100 | 1.3.6.1.4.1.3854.2.3.21.1.101 | INTEGER (0..65535) | read-write | mandatory |
| sensorWaterRopeType OBJECT-TYPE Water rope sensing cable type | 1.3.6.1.4.1.3854.2.3.21.1.103 | INTEGER {custom(0), water(1), fuel(2)} | read-write | mandatory |
| sensorWaterRopeId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.3.21.1.1000 | INTEGER | read-only | mandatory |
| sensorPowerTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.3.22 | not-accessible | mandatory | |
| sensorPowerEntry OBJECT-TYPE This is an entry in the sensorPowerEntry Table | 1.3.6.1.4.1.3854.2.3.22.1 | not-accessible | mandatory | |
| sensorPowerIndex OBJECT-TYPE The index into the Switch sensor table | 1.3.6.1.4.1.3854.2.3.22.1.1 | INTEGER (1..65535) | read-only | mandatory |
| sensorPowerDescription OBJECT-TYPE A Description of this sensor Switch | 1.3.6.1.4.1.3854.2.3.22.1.2 | DisplayString | read-write | mandatory |
| sensorPowerValue OBJECT-TYPE The reading value in this sensor | 1.3.6.1.4.1.3854.2.3.22.1.4 | INTEGER | read-only | mandatory |
| sensorPowerUnit OBJECT-TYPE The unit string | 1.3.6.1.4.1.3854.2.3.22.1.5 | DisplayString | read-write | mandatory |
| sensorPowerStatus OBJECT-TYPE The current status of this Sensor, only input switches have a status | 1.3.6.1.4.1.3854.2.3.22.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorPowerGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.3.22.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| sensorPowerLowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.3.22.1.9 | INTEGER | read-write | mandatory |
| sensorPowerLowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.3.22.1.10 | INTEGER | read-write | mandatory |
| sensorPowerHighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.3.22.1.11 | INTEGER | read-write | mandatory |
| sensorPowerHighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.3.22.1.12 | INTEGER | read-write | mandatory |
| sensorPowerRearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.2.3.22.1.13 | INTEGER | read-write | mandatory |
| sensorPowerDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.2.3.22.1.14 | INTEGER (0..65534) | read-write | mandatory |
| sensorPowerDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.2.3.22.1.15 | INTEGER (0..65534) | read-write | mandatory |
| sensorPowerDelayLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.3.22.1.16 | INTEGER (0..65535) | read-write | mandatory |
| sensorPowerDelayLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.3.22.1.17 | INTEGER (0..65535) | read-write | mandatory |
| sensorPowerDelayHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.3.22.1.18 | INTEGER (0..65535) | read-write | mandatory |
| sensorPowerDelayHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.3.22.1.19 | INTEGER (0..65535) | read-write | mandatory |
| sensorPowerPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.3.22.1.35 | INTEGER (0..65534) | read-only | mandatory |
| sensorPowerSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.3.22.1.36 | INTEGER (0..65534) | read-only | mandatory |
| sensorPowerDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.3.22.1.37 | INTEGER (0..65534) | read-only | mandatory |
| sensorPowerTimeOut OBJECT-TYPE The polling timeout of Power Sensor. | 1.3.6.1.4.1.3854.2.3.22.1.38 | INTEGER (5..30) | read-write | mandatory |
| sensorPowerInterval OBJECT-TYPE The polling interval of Power Sensor. | 1.3.6.1.4.1.3854.2.3.22.1.39 | INTEGER (5..720) | read-write | mandatory |
| sensorPowerErrorRetryNum OBJECT-TYPE Number of retry before error. | 1.3.6.1.4.1.3854.2.3.22.1.40 | INTEGER | read-write | mandatory |
| sensorPowerMaxValue OBJECT-TYPE The maximum scale of Power value. | 1.3.6.1.4.1.3854.2.3.22.1.41 | INTEGER | read-write | mandatory |
| sensorPowerMinValue OBJECT-TYPE The minimum scale of Power value. | 1.3.6.1.4.1.3854.2.3.22.1.42 | INTEGER | read-write | mandatory |
| sensorPowerDisplayStyle OBJECT-TYPE Power display style. | 1.3.6.1.4.1.3854.2.3.22.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| sensorPowerHighCriticalDesc OBJECT-TYPE A HighCritical Description of this sensor | 1.3.6.1.4.1.3854.2.3.22.1.46 | DisplayString | read-write | mandatory |
| sensorPowerLowCriticalDesc OBJECT-TYPE A LowCritical Description of this sensor | 1.3.6.1.4.1.3854.2.3.22.1.47 | DisplayString | read-write | mandatory |
| sensorPowerNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.3.22.1.48 | DisplayString | read-write | mandatory |
| sensorPowerLowWarningDesc OBJECT-TYPE A LowWarning Description of this sensor | 1.3.6.1.4.1.3854.2.3.22.1.49 | DisplayString | read-write | mandatory |
| sensorPowerHighWarningDesc OBJECT-TYPE A HighWarning Description of this sensor | 1.3.6.1.4.1.3854.2.3.22.1.50 | DisplayString | read-write | mandatory |
| sensorPowerSensorErrorDesc OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.3.22.1.51 | DisplayString | read-write | mandatory |
| sensorPowerHighCriticalColor OBJECT-TYPE A HighCritical Color of this sensor | 1.3.6.1.4.1.3854.2.3.22.1.54 | INTEGER | read-write | mandatory |
| sensorPowerLowCriticalColor OBJECT-TYPE A LowCritical Color of this sensor | 1.3.6.1.4.1.3854.2.3.22.1.55 | INTEGER | read-write | mandatory |
| sensorPowerNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.3.22.1.56 | INTEGER | read-write | mandatory |
| sensorPowerLowWarningColor OBJECT-TYPE A LowWarning Color of this sensor | 1.3.6.1.4.1.3854.2.3.22.1.57 | INTEGER | read-write | mandatory |
| sensorPowerHighWarningColor OBJECT-TYPE A HighWarning Color of this sensor | 1.3.6.1.4.1.3854.2.3.22.1.58 | INTEGER | read-write | mandatory |
| sensorPowerSensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.3.22.1.59 | INTEGER | read-write | mandatory |
| sensorPowerValueFormatString OBJECT-TYPE The string-based reading value in this sensor | 1.3.6.1.4.1.3854.2.3.22.1.66 | DisplayString | read-only | mandatory |
| sensorPowerValueFormatFloat OBJECT-TYPE The floating-point IEEE Standard 754 reading value in this sensor | 1.3.6.1.4.1.3854.2.3.22.1.67 | Opaque (SIZE(4)) | read-only | mandatory |
| sensorPowerAcknowledge OBJECT-TYPE Power sensor acknowledge | 1.3.6.1.4.1.3854.2.3.22.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| sensorPowerId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.3.22.1.1000 | INTEGER | read-only | mandatory |
| sensorFuelTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.3.24 | not-accessible | mandatory | |
| sensorFuelEntry OBJECT-TYPE This is an entry in the SensorFuelEntry Table | 1.3.6.1.4.1.3854.2.3.24.1 | not-accessible | mandatory | |
| sensorFuelIndex OBJECT-TYPE The index into the sensor table | 1.3.6.1.4.1.3854.2.3.24.1.1 | INTEGER (1..65535) | read-only | mandatory |
| sensorFuelDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.3.24.1.2 | DisplayString | read-write | mandatory |
| sensorFuelValue OBJECT-TYPE The reading value in this sensor | 1.3.6.1.4.1.3854.2.3.24.1.4 | INTEGER | read-only | mandatory |
| sensorFuelUnit OBJECT-TYPE The unit string | 1.3.6.1.4.1.3854.2.3.24.1.5 | DisplayString | read-write | mandatory |
| sensorFuelStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.2.3.24.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorFuelGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.3.24.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| sensorFuelLowCritical OBJECT-TYPE Level value of this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.3.24.1.9 | INTEGER | read-write | mandatory |
| sensorFuelLowWarning OBJECT-TYPE Level value of this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.3.24.1.10 | INTEGER | read-write | mandatory |
| sensorFuelHighWarning OBJECT-TYPE Level value of this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.3.24.1.11 | INTEGER | read-write | mandatory |
| sensorFuelHighCritical OBJECT-TYPE Level value of this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.3.24.1.12 | INTEGER | read-write | mandatory |
| sensorFuelRearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.2.3.24.1.13 | INTEGER | read-write | mandatory |
| sensorFuelDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.2.3.24.1.14 | INTEGER (0..65534) | read-write | mandatory |
| sensorFuelDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.2.3.24.1.15 | INTEGER (0..65534) | read-write | mandatory |
| sensorFuelDelayLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.3.24.1.16 | INTEGER (0..65535) | read-write | mandatory |
| sensorFuelDelayLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.3.24.1.17 | INTEGER (0..65535) | read-write | mandatory |
| sensorFuelDelayHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.3.24.1.18 | INTEGER (0..65535) | read-write | mandatory |
| sensorFuelDelayHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.3.24.1.19 | INTEGER (0..65535) | read-write | mandatory |
| sensorFuelRaw OBJECT-TYPE The unformatted, raw, A/D value in this sensor. Contains more resolution than the formated percentage. | 1.3.6.1.4.1.3854.2.3.24.1.20 | INTEGER | read-only | mandatory |
| sensorFuelAmountMaxValue OBJECT-TYPE The maximum scale of value conversion. | 1.3.6.1.4.1.3854.2.3.24.1.33 | INTEGER | read-write | mandatory |
| sensorFuelAmountBaseValue OBJECT-TYPE The base scale of value conversion. | 1.3.6.1.4.1.3854.2.3.24.1.34 | INTEGER | read-write | mandatory |
| sensorFuelDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.3.24.1.37 | INTEGER (0..65534) | read-only | mandatory |
| sensorFuelDisplayStyle OBJECT-TYPE Fuel display style | 1.3.6.1.4.1.3854.2.3.24.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| sensorFuelHighCriticalDesc OBJECT-TYPE A HighCritical Description of this sensor | 1.3.6.1.4.1.3854.2.3.24.1.46 | DisplayString | read-write | mandatory |
| sensorFuelLowCriticalDesc OBJECT-TYPE A LowCritical Description of this sensor | 1.3.6.1.4.1.3854.2.3.24.1.47 | DisplayString | read-write | mandatory |
| sensorFuelNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.3.24.1.48 | DisplayString | read-write | mandatory |
| sensorFuelLowWarningDesc OBJECT-TYPE A LowWarning Description of this sensor | 1.3.6.1.4.1.3854.2.3.24.1.49 | DisplayString | read-write | mandatory |
| sensorFuelHighWarningDesc OBJECT-TYPE A HighWarning Description of this sensor | 1.3.6.1.4.1.3854.2.3.24.1.50 | DisplayString | read-write | mandatory |
| sensorFuelSensorErrorDesc OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.3.24.1.51 | DisplayString | read-write | mandatory |
| sensorFuelHighCriticalColor OBJECT-TYPE A HighCritical Color of this sensor | 1.3.6.1.4.1.3854.2.3.24.1.54 | INTEGER | read-write | mandatory |
| sensorFuelLowCriticalColor OBJECT-TYPE A LowCritical Color of this sensor | 1.3.6.1.4.1.3854.2.3.24.1.55 | INTEGER | read-write | mandatory |
| sensorFuelNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.3.24.1.56 | INTEGER | read-write | mandatory |
| sensorFuelLowWarningColor OBJECT-TYPE A LowWarning Color of this sensor | 1.3.6.1.4.1.3854.2.3.24.1.57 | INTEGER | read-write | mandatory |
| sensorFuelHighWarningColor OBJECT-TYPE A HighWarning Color of this sensor | 1.3.6.1.4.1.3854.2.3.24.1.58 | INTEGER | read-write | mandatory |
| sensorFuelSensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.3.24.1.59 | INTEGER | read-write | mandatory |
| sensorFuelAcknowledge OBJECT-TYPE Fuel sensor acknowledge | 1.3.6.1.4.1.3854.2.3.24.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| sensorFuelId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.3.24.1.1000 | INTEGER | read-only | mandatory |
| sensorTankSenderTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.3.26 | not-accessible | mandatory | |
| sensorTankSenderEntry OBJECT-TYPE This is an entry in the sensorTankSenderEntry Table | 1.3.6.1.4.1.3854.2.3.26.1 | not-accessible | mandatory | |
| sensorTankSenderIndex OBJECT-TYPE The index into the sensor table | 1.3.6.1.4.1.3854.2.3.26.1.1 | INTEGER (1..65535) | read-only | mandatory |
| sensorTankSenderDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.3.26.1.2 | DisplayString | read-write | mandatory |
| sensorTankSenderValue OBJECT-TYPE The reading value in this sensor | 1.3.6.1.4.1.3854.2.3.26.1.4 | INTEGER | read-only | mandatory |
| sensorTankSenderUnit OBJECT-TYPE The unit string | 1.3.6.1.4.1.3854.2.3.26.1.5 | DisplayString | read-write | mandatory |
| sensorTankSenderStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.2.3.26.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorTankSenderGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.3.26.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| sensorTankSenderLowCritical OBJECT-TYPE Level value of this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.3.26.1.9 | INTEGER | read-write | mandatory |
| sensorTankSenderLowWarning OBJECT-TYPE Level value of this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.3.26.1.10 | INTEGER | read-write | mandatory |
| sensorTankSenderHighWarning OBJECT-TYPE Level value of this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.3.26.1.11 | INTEGER | read-write | mandatory |
| sensorTankSenderHighCritical OBJECT-TYPE Level value of this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.3.26.1.12 | INTEGER | read-write | mandatory |
| sensorTankSenderRearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.2.3.26.1.13 | INTEGER | read-write | mandatory |
| sensorTankSenderDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.2.3.26.1.14 | INTEGER (0..65534) | read-write | mandatory |
| sensorTankSenderDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.2.3.26.1.15 | INTEGER (0..65534) | read-write | mandatory |
| sensorTankSenderDelayLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.3.26.1.16 | INTEGER (0..65535) | read-write | mandatory |
| sensorTankSenderDelayLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.3.26.1.17 | INTEGER (0..65535) | read-write | mandatory |
| sensorTankSenderDelayHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.3.26.1.18 | INTEGER (0..65535) | read-write | mandatory |
| sensorTankSenderDelayHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.3.26.1.19 | INTEGER (0..65535) | read-write | mandatory |
| sensorTankSenderRaw OBJECT-TYPE The unformatted, raw, A/D value in this sensor. Contains more resolution than the formated percentage. | 1.3.6.1.4.1.3854.2.3.26.1.20 | INTEGER | read-only | mandatory |
| sensorTankSenderDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.3.26.1.37 | INTEGER (0..65534) | read-only | mandatory |
| sensorTankSenderDisplayStyle OBJECT-TYPE TankSender display style | 1.3.6.1.4.1.3854.2.3.26.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| sensorTankSenderHighCriticalDesc OBJECT-TYPE A HighCritical Description of this sensor | 1.3.6.1.4.1.3854.2.3.26.1.46 | DisplayString | read-write | mandatory |
| sensorTankSenderLowCriticalDesc OBJECT-TYPE A LowCritical Description of this sensor | 1.3.6.1.4.1.3854.2.3.26.1.47 | DisplayString | read-write | mandatory |
| sensorTankSenderNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.3.26.1.48 | DisplayString | read-write | mandatory |
| sensorTankSenderLowWarningDesc OBJECT-TYPE A LowWarning Description of this sensor | 1.3.6.1.4.1.3854.2.3.26.1.49 | DisplayString | read-write | mandatory |
| sensorTankSenderHighWarningDesc OBJECT-TYPE A HighWarning Description of this sensor | 1.3.6.1.4.1.3854.2.3.26.1.50 | DisplayString | read-write | mandatory |
| sensorTankSenderSensorErrorDesc OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.3.26.1.51 | DisplayString | read-write | mandatory |
| sensorTankSenderHighCriticalColor OBJECT-TYPE A HighCritical Color of this sensor | 1.3.6.1.4.1.3854.2.3.26.1.54 | INTEGER | read-write | mandatory |
| sensorTankSenderLowCriticalColor OBJECT-TYPE A LowCritical Color of this sensor | 1.3.6.1.4.1.3854.2.3.26.1.55 | INTEGER | read-write | mandatory |
| sensorTankSenderNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.3.26.1.56 | INTEGER | read-write | mandatory |
| sensorTankSenderLowWarningColor OBJECT-TYPE A LowWarning Color of this sensor | 1.3.6.1.4.1.3854.2.3.26.1.57 | INTEGER | read-write | mandatory |
| sensorTankSenderHighWarningColor OBJECT-TYPE A HighWarning Color of this sensor | 1.3.6.1.4.1.3854.2.3.26.1.58 | INTEGER | read-write | mandatory |
| sensorTankSenderSensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.3.26.1.59 | INTEGER | read-write | mandatory |
| sensorTankSenderAcknowledge OBJECT-TYPE Tank Sender sensor acknowledge | 1.3.6.1.4.1.3854.2.3.26.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| sensorTankSenderId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.3.26.1.1000 | INTEGER | read-only | mandatory |
| sensorDoorTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.3.27 | not-accessible | mandatory | |
| sensorDoorEntry OBJECT-TYPE This is an entry in the sensorDoorEntry Table | 1.3.6.1.4.1.3854.2.3.27.1 | not-accessible | mandatory | |
| sensorDoorIndex OBJECT-TYPE The index into the sensor table | 1.3.6.1.4.1.3854.2.3.27.1.1 | INTEGER (1..65535) | read-only | mandatory |
| sensorDoorDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.3.27.1.2 | DisplayString | read-write | mandatory |
| sensorDoorValue OBJECT-TYPE The reading value in this sensor | 1.3.6.1.4.1.3854.2.3.27.1.4 | INTEGER | read-only | mandatory |
| sensorDoorStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.2.3.27.1.6 | INTEGER {noStatus(1), closed(2), heldOpen(3), fire(4), opened(5), forceOpened(6), sensorError(7)} | read-only | mandatory |
| sensorDoorUnlockPeriod OBJECT-TYPE Door unlock period | 1.3.6.1.4.1.3854.2.3.27.1.62 | INTEGER | read-write | mandatory |
| sensorDoorOpenPeriod OBJECT-TYPE Door open period | 1.3.6.1.4.1.3854.2.3.27.1.63 | INTEGER | read-write | mandatory |
| sensorDoorCmd OBJECT-TYPE Door command | 1.3.6.1.4.1.3854.2.3.27.1.64 | INTEGER | read-write | mandatory |
| sensorDoorAcknowledge OBJECT-TYPE Door sensor acknowledge | 1.3.6.1.4.1.3854.2.3.27.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| sensorDoorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.3.27.1.1000 | INTEGER | read-only | mandatory |
| sensorTemperatureArrayTable OBJECT-TYPE This table contains the property and reading value for every Temperature sensor. | 1.3.6.1.4.1.3854.2.3.28 | not-accessible | mandatory | |
| sensorTemperatureArrayEntry OBJECT-TYPE This is an entry in the sensorTemperatureArrayEntry Table | 1.3.6.1.4.1.3854.2.3.28.1 | not-accessible | mandatory | |
| sensorTemperatureArrayIndex OBJECT-TYPE The index into the sensor table | 1.3.6.1.4.1.3854.2.3.28.1.1 | INTEGER (1..65535) | read-only | mandatory |
| sensorTemperatureArrayDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.3.28.1.2 | DisplayString | read-write | mandatory |
| sensorTemperatureArrayType OBJECT-TYPE Enter the type of this Sensor | 1.3.6.1.4.1.3854.2.3.28.1.3 | INTEGER {arraytemp(23)} | read-only | mandatory |
| sensorTemperatureArrayDegree OBJECT-TYPE The degrees in this sensor | 1.3.6.1.4.1.3854.2.3.28.1.4 | INTEGER | read-only | mandatory |
| sensorTemperatureArrayUnit OBJECT-TYPE The unit string | 1.3.6.1.4.1.3854.2.3.28.1.5 | DisplayString | read-only | mandatory |
| sensorTemperatureArrayStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.2.3.28.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| sensorTemperatureArrayGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.3.28.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| sensorTemperatureArrayLowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.3.28.1.9 | INTEGER | read-write | mandatory |
| sensorTemperatureArrayLowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.3.28.1.10 | INTEGER | read-write | mandatory |
| sensorTemperatureArrayHighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.3.28.1.11 | INTEGER | read-write | mandatory |
| sensorTemperatureArrayHighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.3.28.1.12 | INTEGER | read-write | mandatory |
| sensorTemperatureArrayRearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.2.3.28.1.13 | INTEGER | read-write | mandatory |
| sensorTemperatureArrayDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.2.3.28.1.14 | INTEGER (0..65534) | read-write | mandatory |
| sensorTemperatureArrayDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.2.3.28.1.15 | INTEGER (0..65534) | read-write | mandatory |
| sensorTemperatureArrayDelayLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.3.28.1.16 | INTEGER (0..65535) | read-write | mandatory |
| sensorTemperatureArrayDelayLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.3.28.1.17 | INTEGER (0..65535) | read-write | mandatory |
| sensorTemperatureArrayDelayHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.3.28.1.18 | INTEGER (0..65535) | read-write | mandatory |
| sensorTemperatureArrayDelayHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.3.28.1.19 | INTEGER (0..65535) | read-write | mandatory |
| sensorTemperatureArrayRaw OBJECT-TYPE The raw degree data from the temperature sensor, slightly higher resolution | 1.3.6.1.4.1.3854.2.3.28.1.20 | INTEGER | read-only | mandatory |
| sensorTemperatureArrayOffset OBJECT-TYPE Temperature Offset reading | 1.3.6.1.4.1.3854.2.3.28.1.21 | INTEGER | read-write | mandatory |
| sensorTemperatureArrayPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.3.28.1.35 | INTEGER (0..65534) | read-only | mandatory |
| sensorTemperatureArraySubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.3.28.1.36 | INTEGER (0..65534) | read-only | mandatory |
| sensorTemperatureArrayDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.3.28.1.37 | INTEGER (0..65534) | read-only | mandatory |
| sensorTemperatureArrayDisplayStyle OBJECT-TYPE Temperature display style | 1.3.6.1.4.1.3854.2.3.28.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| sensorTemperatureArrayHighCriticalDesc OBJECT-TYPE A HighCritical Description of this sensor | 1.3.6.1.4.1.3854.2.3.28.1.46 | DisplayString | read-write | mandatory |
| sensorTemperatureArrayLowCriticalDesc OBJECT-TYPE A LowCritical Description of this sensor | 1.3.6.1.4.1.3854.2.3.28.1.47 | DisplayString | read-write | mandatory |
| sensorTemperatureArrayNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.3.28.1.48 | DisplayString | read-write | mandatory |
| sensorTemperatureArrayLowWarningDesc OBJECT-TYPE A LowWarning Description of this sensor | 1.3.6.1.4.1.3854.2.3.28.1.49 | DisplayString | read-write | mandatory |
| sensorTemperatureArrayHighWarningDesc OBJECT-TYPE A HighWarning Description of this sensor | 1.3.6.1.4.1.3854.2.3.28.1.50 | DisplayString | read-write | mandatory |
| sensorTemperatureArraySensorErrorDesc OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.3.28.1.51 | DisplayString | read-write | mandatory |
| sensorTemperatureArrayHighCriticalColor OBJECT-TYPE A HighCritical Color of this sensor | 1.3.6.1.4.1.3854.2.3.28.1.54 | INTEGER | read-write | mandatory |
| sensorTemperatureArrayLowCriticalColor OBJECT-TYPE A LowCritical Color of this sensor | 1.3.6.1.4.1.3854.2.3.28.1.55 | INTEGER | read-write | mandatory |
| sensorTemperatureArrayNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.3.28.1.56 | INTEGER | read-write | mandatory |
| sensorTemperatureArrayLowWarningColor OBJECT-TYPE A LowWarning Color of this sensor | 1.3.6.1.4.1.3854.2.3.28.1.57 | INTEGER | read-write | mandatory |
| sensorTemperatureArrayHighWarningColor OBJECT-TYPE A HighWarning Color of this sensor | 1.3.6.1.4.1.3854.2.3.28.1.58 | INTEGER | read-write | mandatory |
| sensorTemperatureArraySensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.3.28.1.59 | INTEGER | read-write | mandatory |
| sensorTemperatureArrayAcknowledge OBJECT-TYPE Temperature sensor acknowledge | 1.3.6.1.4.1.3854.2.3.28.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| sensorTemperatureArraySerialNumber OBJECT-TYPE Serial Number of Temperature Sensor x is Hex Digit xx-xx-xx-xx-xx-xx-xx-xx | 1.3.6.1.4.1.3854.2.3.28.1.71 | DisplayString | read-write | mandatory |
| sensorTemperatureArrayId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.3.28.1.1000 | INTEGER | read-only | mandatory |
| secNotification OBJECT-IDENTITY | 1.3.6.1.4.1.3854.2.4 | |||
| action OBJECT-IDENTITY | 1.3.6.1.4.1.3854.2.4.1 | |||
| actionTable OBJECT-TYPE This table contains the property for every action of notification. | 1.3.6.1.4.1.3854.2.4.1.1 | not-accessible | mandatory | |
| actionEntry OBJECT-TYPE This is an entry in the actionTable Table | 1.3.6.1.4.1.3854.2.4.1.1.1 | not-accessible | mandatory | |
| actionIndex OBJECT-TYPE The index into the action table. | 1.3.6.1.4.1.3854.2.4.1.1.1.1 | INTEGER (1..65535) | read-only | mandatory |
| actionType OBJECT-TYPE The type of this action. | 1.3.6.1.4.1.3854.2.4.1.1.1.2 | INTEGER {trap(1), email(2), sms(3), mms(4), sound(5), speech(6), dial(7), relay(8), custom(9), ftp(10), event(11), fax(12), soundlog(13), camera(14), siren(15), mobile(16), shut(17), windows(19), skype(20), drycontact(21), ctrSensorAction(22)} | read-only | mandatory |
| actionName OBJECT-TYPE A name of this action. | 1.3.6.1.4.1.3854.2.4.1.1.1.3 | DisplayString | read-write | mandatory |
| actionMaxResend OBJECT-TYPE The maximum number of times to resend action. If set to 0 only send once. The maximum value is 5. | 1.3.6.1.4.1.3854.2.4.1.1.1.4 | INTEGER | read-write | mandatory |
| actionResendInterval OBJECT-TYPE How often to resend action. Enter the number of seconds from 15 to 65535. | 1.3.6.1.4.1.3854.2.4.1.1.1.5 | INTEGER | read-write | mandatory |
| actionTest OBJECT-TYPE Do test an action of notification. | 1.3.6.1.4.1.3854.2.4.1.1.1.6 | INTEGER | read-write | mandatory |
| sensorByPort OBJECT-IDENTITY | 1.3.6.1.4.1.3854.2.5 | |||
| commonSensorTable OBJECT-TYPE This table contains the property and reading value for every Sensor. | 1.3.6.1.4.1.3854.2.5.1 | not-accessible | mandatory | |
| commonSensorEntry OBJECT-TYPE This is an entry in the commonSensorTable | 1.3.6.1.4.1.3854.2.5.1.1 | not-accessible | mandatory | |
| commonSensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.1.1.1 | DisplayString | read-only | mandatory |
| commonSensorDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.5.1.1.2 | DisplayString | read-write | mandatory |
| commonSensorType OBJECT-TYPE Enter the type of this Sensor | 1.3.6.1.4.1.3854.2.5.1.1.3 | INTEGER {temperature(1), humidity(2), temperature-dual(3), four-20mA(4), dcvoltage(5), airflow(6), io(7), drycontact(8), motion(9), water(10), security(11), siren(12), relay(13), acvoltage(14), vrms(15), irms(16), watt(17), watthour(18), xrelay(19), thermocouple(20), smoke(21), drycontact-array(22), temperature-array(23), thermostat(128), virtual(129), sound(130), softmotion(131), camera-dummy(132), board-state(133), nosignal(224), test(255)} | read-only | mandatory |
| commonSensorValue OBJECT-TYPE The value in this sensor | 1.3.6.1.4.1.3854.2.5.1.1.4 | INTEGER | read-only | mandatory |
| commonSensorUnit OBJECT-TYPE The unit string | 1.3.6.1.4.1.3854.2.5.1.1.5 | DisplayString | read-only | mandatory |
| commonSensorStatus OBJECT-TYPE The current status of this sensor | 1.3.6.1.4.1.3854.2.5.1.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| commonSensorGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.5.1.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| commonSensorPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.5.1.1.35 | INTEGER (0..65534) | read-only | mandatory |
| commonSensorSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.5.1.1.36 | INTEGER (0..65534) | read-only | mandatory |
| commonSensorDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.5.1.1.37 | INTEGER (0..65534) | read-only | mandatory |
| commonSensorDisplayStyle OBJECT-TYPE Temperature display style | 1.3.6.1.4.1.3854.2.5.1.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| commonSensorHighCriticalDescription OBJECT-TYPE A HighCritical Description of this sensor | 1.3.6.1.4.1.3854.2.5.1.1.46 | DisplayString | read-write | mandatory |
| commonSensorLowCriticalDescription OBJECT-TYPE A LowCritical Description of this sensor | 1.3.6.1.4.1.3854.2.5.1.1.47 | DisplayString | read-write | mandatory |
| commonSensorSensorNormalDescription OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.5.1.1.48 | DisplayString | read-write | mandatory |
| commonSensorLowWarningDescription OBJECT-TYPE A LowWarning Description of this sensor | 1.3.6.1.4.1.3854.2.5.1.1.49 | DisplayString | read-write | mandatory |
| commonSensorHighWarningDescription OBJECT-TYPE A HighWarning Description of this sensor | 1.3.6.1.4.1.3854.2.5.1.1.50 | DisplayString | read-write | mandatory |
| commonSensorSensorErrorDescription OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.5.1.1.51 | DisplayString | read-write | mandatory |
| commonSensorOnDescription OBJECT-TYPE A On Description of this sensor | 1.3.6.1.4.1.3854.2.5.1.1.52 | DisplayString | read-write | mandatory |
| commonSensorOffDescription OBJECT-TYPE A Off Description of this sensor | 1.3.6.1.4.1.3854.2.5.1.1.53 | DisplayString | read-write | mandatory |
| commonSensorHighCriticalColor OBJECT-TYPE A HighCritical Color of this sensor | 1.3.6.1.4.1.3854.2.5.1.1.54 | INTEGER | read-write | mandatory |
| commonSensorLowCriticalColor OBJECT-TYPE A LowCritical Color of this sensor | 1.3.6.1.4.1.3854.2.5.1.1.55 | INTEGER | read-write | mandatory |
| commonSensorSensorNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.5.1.1.56 | INTEGER | read-write | mandatory |
| commonSensorLowWarningColor OBJECT-TYPE A LowWarning Color of this sensor | 1.3.6.1.4.1.3854.2.5.1.1.57 | INTEGER | read-write | mandatory |
| commonSensorHighWarningColor OBJECT-TYPE A HighWarning Color of this sensor | 1.3.6.1.4.1.3854.2.5.1.1.58 | INTEGER | read-write | mandatory |
| commonSensorSensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.5.1.1.59 | INTEGER | read-write | mandatory |
| commonSensorOnColor OBJECT-TYPE A On Color of this sensor | 1.3.6.1.4.1.3854.2.5.1.1.60 | INTEGER | read-write | mandatory |
| commonSensorOffColor OBJECT-TYPE A Off Color of this sensor | 1.3.6.1.4.1.3854.2.5.1.1.61 | INTEGER | read-write | mandatory |
| commonSensorAcknowledge OBJECT-TYPE Sensor acknowledge | 1.3.6.1.4.1.3854.2.5.1.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| commonSensorValueFormatFloat OBJECT-TYPE The floating-point IEEE Standard 754 reading value in this sensor | 1.3.6.1.4.1.3854.2.5.1.1.99 | Opaque (SIZE(4)) | read-only | mandatory |
| commonSensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.1.1.1000 | INTEGER | read-only | mandatory |
| temperatureSensorTable OBJECT-TYPE This table contains the property and reading value for every Temperature sensor. | 1.3.6.1.4.1.3854.2.5.2 | not-accessible | mandatory | |
| temperatureSensorEntry OBJECT-TYPE This is an entry in the temperatureSensorEntry Table | 1.3.6.1.4.1.3854.2.5.2.1 | not-accessible | mandatory | |
| temperatureSensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.2.1.1 | DisplayString | read-only | mandatory |
| temperatureSensorDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.5.2.1.2 | DisplayString | read-write | mandatory |
| temperatureSensorType OBJECT-TYPE Enter the type of this Sensor | 1.3.6.1.4.1.3854.2.5.2.1.3 | INTEGER {temperature(1), dualsensor(3), thermocouple(20)} | read-only | mandatory |
| temperatureSensorDegree OBJECT-TYPE The degrees in this sensor | 1.3.6.1.4.1.3854.2.5.2.1.4 | INTEGER | read-only | mandatory |
| temperatureSensorUnit OBJECT-TYPE The unit string | 1.3.6.1.4.1.3854.2.5.2.1.5 | DisplayString | read-only | mandatory |
| temperatureSensorStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.2.5.2.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| temperatureSensorGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.5.2.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| temperatureSensorLowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.5.2.1.9 | INTEGER | read-write | mandatory |
| temperatureSensorLowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.5.2.1.10 | INTEGER | read-write | mandatory |
| temperatureSensorHighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.5.2.1.11 | INTEGER | read-write | mandatory |
| temperatureSensorHighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.5.2.1.12 | INTEGER | read-write | mandatory |
| temperatureSensorRearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.2.5.2.1.13 | INTEGER | read-write | mandatory |
| temperatureSensorDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.2.5.2.1.14 | INTEGER (0..65534) | read-write | mandatory |
| temperatureSensorDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.2.5.2.1.15 | INTEGER (0..65534) | read-write | mandatory |
| temperatureSensorDelayLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.2.1.16 | INTEGER (0..65535) | read-write | mandatory |
| temperatureSensorDelayLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.5.2.1.17 | INTEGER (0..65535) | read-write | mandatory |
| temperatureSensorDelayHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.5.2.1.18 | INTEGER (0..65535) | read-write | mandatory |
| temperatureSensorDelayHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.2.1.19 | INTEGER (0..65535) | read-write | mandatory |
| temperatureSensorRaw OBJECT-TYPE The raw degree data from the temperature sensor, slightly higher resolution | 1.3.6.1.4.1.3854.2.5.2.1.20 | INTEGER | read-only | mandatory |
| temperatureSensorOffset OBJECT-TYPE Temperature Offset reading | 1.3.6.1.4.1.3854.2.5.2.1.21 | INTEGER | read-write | mandatory |
| temperatureSensorPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.5.2.1.35 | INTEGER (0..65534) | read-only | mandatory |
| temperatureSensorSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.5.2.1.36 | INTEGER (0..65534) | read-only | mandatory |
| temperatureSensorDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.5.2.1.37 | INTEGER (0..65534) | read-only | mandatory |
| temperatureSensorDisplayStyle OBJECT-TYPE Temperature display style | 1.3.6.1.4.1.3854.2.5.2.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| temperatureSensorHighCriticalDesc OBJECT-TYPE A HighCritical Description of this sensor | 1.3.6.1.4.1.3854.2.5.2.1.46 | DisplayString | read-write | mandatory |
| temperatureSensorLowCriticalDesc OBJECT-TYPE A LowCritical Description of this sensor | 1.3.6.1.4.1.3854.2.5.2.1.47 | DisplayString | read-write | mandatory |
| temperatureSensorNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.5.2.1.48 | DisplayString | read-write | mandatory |
| temperatureSensorLowWarningDesc OBJECT-TYPE A LowWarning Description of this sensor | 1.3.6.1.4.1.3854.2.5.2.1.49 | DisplayString | read-write | mandatory |
| temperatureSensorHighWarningDesc OBJECT-TYPE A HighWarning Description of this sensor | 1.3.6.1.4.1.3854.2.5.2.1.50 | DisplayString | read-write | mandatory |
| temperatureSensorSensorErrorDesc OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.5.2.1.51 | DisplayString | read-write | mandatory |
| temperatureSensorHighCriticalColor OBJECT-TYPE A HighCritical Color of this sensor | 1.3.6.1.4.1.3854.2.5.2.1.54 | INTEGER | read-write | mandatory |
| temperatureSensorLowCriticalColor OBJECT-TYPE A LowCritical Color of this sensor | 1.3.6.1.4.1.3854.2.5.2.1.55 | INTEGER | read-write | mandatory |
| temperatureSensorSensorNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.5.2.1.56 | INTEGER | read-write | mandatory |
| temperatureSensorLowWarningColor OBJECT-TYPE A LowWarning Color of this sensor | 1.3.6.1.4.1.3854.2.5.2.1.57 | INTEGER | read-write | mandatory |
| temperatureSensorHighWarningColor OBJECT-TYPE A HighWarning Color of this sensor | 1.3.6.1.4.1.3854.2.5.2.1.58 | INTEGER | read-write | mandatory |
| temperatureSensorSensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.5.2.1.59 | INTEGER | read-write | mandatory |
| temperatureSensorAcknowledge OBJECT-TYPE Temperature sensor acknowledge | 1.3.6.1.4.1.3854.2.5.2.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| temperatureSensorSerialNumber OBJECT-TYPE Serial Number of Temperature Sensor x is Hex Digit xx-xx-xx-xx-xx-xx-xx-xx | 1.3.6.1.4.1.3854.2.5.2.1.71 | DisplayString | read-write | mandatory |
| temperatureSensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.2.1.1000 | INTEGER | read-only | mandatory |
| humiditySensorTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.5.3 | not-accessible | mandatory | |
| humiditySensorEntry OBJECT-TYPE This is an entry in the cmpTemperatureEntry Table | 1.3.6.1.4.1.3854.2.5.3.1 | not-accessible | mandatory | |
| humiditySensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.3.1.1 | DisplayString | read-only | mandatory |
| humiditySensorDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.5.3.1.2 | DisplayString | read-write | mandatory |
| humiditySensorPercent OBJECT-TYPE The relative humidity percentage measured by this sensor | 1.3.6.1.4.1.3854.2.5.3.1.4 | INTEGER | read-only | mandatory |
| humiditySensorUnit OBJECT-TYPE The unit string | 1.3.6.1.4.1.3854.2.5.3.1.5 | DisplayString | read-write | mandatory |
| humiditySensorStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.2.5.3.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| humiditySensorGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.5.3.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| humiditySensorLowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.5.3.1.9 | INTEGER | read-write | mandatory |
| humiditySensorLowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.5.3.1.10 | INTEGER | read-write | mandatory |
| humiditySensorHighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.5.3.1.11 | INTEGER | read-write | mandatory |
| humiditySensorHighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.5.3.1.12 | INTEGER | read-write | mandatory |
| humiditySensorRearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.2.5.3.1.13 | INTEGER | read-write | mandatory |
| humiditySensorDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.2.5.3.1.14 | INTEGER (0..65534) | read-write | mandatory |
| humiditySensorDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.2.5.3.1.15 | INTEGER (0..65534) | read-write | mandatory |
| humiditySensorDelayLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.3.1.16 | INTEGER (0..65535) | read-write | mandatory |
| humiditySensorDelayLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.5.3.1.17 | INTEGER (0..65535) | read-write | mandatory |
| humiditySensorDelayHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.5.3.1.18 | INTEGER (0..65535) | read-write | mandatory |
| humiditySensorDelayHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.3.1.19 | INTEGER (0..65535) | read-write | mandatory |
| humiditySensorRaw OBJECT-TYPE The unformatted, raw, A/D value in this sensor. Contains more resolution than the formated percentage. This number can go from 0 to 1023 depending on the input voltage | 1.3.6.1.4.1.3854.2.5.3.1.20 | INTEGER | read-only | mandatory |
| humiditySensorOffset OBJECT-TYPE Humidity Offset reading | 1.3.6.1.4.1.3854.2.5.3.1.21 | INTEGER | read-write | mandatory |
| humiditySensorPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.5.3.1.35 | INTEGER (0..65534) | read-only | mandatory |
| humiditySensorSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.5.3.1.36 | INTEGER (0..65534) | read-only | mandatory |
| humiditySensorDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.5.3.1.37 | INTEGER (0..65534) | read-only | mandatory |
| humiditySensorDisplayStyle OBJECT-TYPE Humidity display style | 1.3.6.1.4.1.3854.2.5.3.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| humiditySensorHighCriticalDesc OBJECT-TYPE A HighCritical Description of this sensor | 1.3.6.1.4.1.3854.2.5.3.1.46 | DisplayString | read-write | mandatory |
| humiditySensorLowCriticalDesc OBJECT-TYPE A LowCritical Description of this sensor | 1.3.6.1.4.1.3854.2.5.3.1.47 | DisplayString | read-write | mandatory |
| humiditySensorNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.5.3.1.48 | DisplayString | read-write | mandatory |
| humiditySensorLowWarningDesc OBJECT-TYPE A LowWarning Description of this sensor | 1.3.6.1.4.1.3854.2.5.3.1.49 | DisplayString | read-write | mandatory |
| humiditySensorHighWarningDesc OBJECT-TYPE A HighWarning Description of this sensor | 1.3.6.1.4.1.3854.2.5.3.1.50 | DisplayString | read-write | mandatory |
| humiditySensorSensorErrorDesc OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.5.3.1.51 | DisplayString | read-write | mandatory |
| humiditySensorHighCriticalColor OBJECT-TYPE A HighCritical Color of this sensor | 1.3.6.1.4.1.3854.2.5.3.1.54 | INTEGER | read-write | mandatory |
| humiditySensorLowCriticalColor OBJECT-TYPE A LowCritical Color of this sensor | 1.3.6.1.4.1.3854.2.5.3.1.55 | INTEGER | read-write | mandatory |
| humiditySensorSensorNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.5.3.1.56 | INTEGER | read-write | mandatory |
| humiditySensorLowWarningColor OBJECT-TYPE A LowWarning Color of this sensor | 1.3.6.1.4.1.3854.2.5.3.1.57 | INTEGER | read-write | mandatory |
| humiditySensorHighWarningColor OBJECT-TYPE A HighWarning Color of this sensor | 1.3.6.1.4.1.3854.2.5.3.1.58 | INTEGER | read-write | mandatory |
| humiditySensorSensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.5.3.1.59 | INTEGER | read-write | mandatory |
| humiditySensorAcknowledge OBJECT-TYPE Humidity sensor acknowledge | 1.3.6.1.4.1.3854.2.5.3.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| humiditySensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.3.1.1000 | INTEGER | read-only | mandatory |
| dryContactSensorTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.5.4 | not-accessible | mandatory | |
| dryContactSensorEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.5.4.1 | not-accessible | mandatory | |
| dryContactSensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.4.1.1 | DisplayString | read-only | mandatory |
| dryContactSensorDescription OBJECT-TYPE A Description of this sensor Switch | 1.3.6.1.4.1.3854.2.5.4.1.2 | DisplayString | read-write | mandatory |
| dryContactSensorType OBJECT-TYPE Enter the type of this Sensor | 1.3.6.1.4.1.3854.2.5.4.1.3 | INTEGER {drycontact-inout(7), drycontact-input(8), drycontact-array(22)} | read-only | mandatory |
| dryContactSensorStatus OBJECT-TYPE The current status of this Sensor, only input switches have a status | 1.3.6.1.4.1.3854.2.5.4.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), outputLow(8), outputHigh(9)} | read-only | mandatory |
| dryContactSensorGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.5.4.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| dryContactSensorDirection OBJECT-TYPE To set a switch to input enter 0. To set a switch to output enter 1 | 1.3.6.1.4.1.3854.2.5.4.1.22 | INTEGER {input(0), output(1)} | read-write | mandatory |
| dryContactSensorNormalState OBJECT-TYPE The normal state of an input switch. If an input switch is in this state it is normal, else it is critical. An open switch senses +5 volts. A closed switch senses 0 volts. | 1.3.6.1.4.1.3854.2.5.4.1.23 | INTEGER {closed(0), open(1)} | read-write | mandatory |
| dryContactSensorControlMode OBJECT-TYPE Control Mode used for selecting the mode to control a sensor output. | 1.3.6.1.4.1.3854.2.5.4.1.24 | INTEGER {manual-control(0), sensor-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| dryContactSensorOutputManualCycleTime OBJECT-TYPE Toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.2.5.4.1.25 | INTEGER (1..255) | read-write | mandatory |
| dryContactSensorOutputManualAction OBJECT-TYPE Control the sensor output manualy | 1.3.6.1.4.1.3854.2.5.4.1.26 | INTEGER {low(0), high(1), cycle-Low-High-Low(2), cycle-High-Low-High(3)} | read-write | mandatory |
| dryContactSensorPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.5.4.1.35 | INTEGER (0..65534) | read-only | mandatory |
| dryContactSensorSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.5.4.1.36 | INTEGER (0..65534) | read-only | mandatory |
| dryContactSensorDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.5.4.1.37 | INTEGER (0..65534) | read-only | mandatory |
| dryContactSensorCriticalDesc OBJECT-TYPE A Critical Description of this sensor | 1.3.6.1.4.1.3854.2.5.4.1.46 | DisplayString | read-write | mandatory |
| dryContactSensorNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.5.4.1.48 | DisplayString | read-write | mandatory |
| dryContactSensorOnDesc OBJECT-TYPE A On Description of this sensor | 1.3.6.1.4.1.3854.2.5.4.1.52 | DisplayString | read-write | mandatory |
| dryContactSensorOffDesc OBJECT-TYPE A Off Description of this sensor | 1.3.6.1.4.1.3854.2.5.4.1.53 | DisplayString | read-write | mandatory |
| dryContactSensorCriticalColor OBJECT-TYPE A Critical Color of this sensor | 1.3.6.1.4.1.3854.2.5.4.1.54 | INTEGER | read-write | mandatory |
| dryContactSensorNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.5.4.1.56 | INTEGER | read-write | mandatory |
| dryContactSensorOnColor OBJECT-TYPE A On Color of this sensor | 1.3.6.1.4.1.3854.2.5.4.1.60 | INTEGER | read-write | mandatory |
| dryContactSensorOffColor OBJECT-TYPE A Off Color of this sensor | 1.3.6.1.4.1.3854.2.5.4.1.61 | INTEGER | read-write | mandatory |
| dryContactSensorAcknowledge OBJECT-TYPE Dry Contact sensor acknowledge | 1.3.6.1.4.1.3854.2.5.4.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| dryContactSensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.4.1.1000 | INTEGER | read-only | mandatory |
| current4to20mASensorTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.5.5 | not-accessible | mandatory | |
| current4to20mASensorEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.5.5.1 | not-accessible | mandatory | |
| current4to20mASensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.5.1.1 | DisplayString | read-only | mandatory |
| current4to20mASensorDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.5.5.1.2 | DisplayString | read-write | mandatory |
| current4to20mASensorValue OBJECT-TYPE The reading value in this sensor | 1.3.6.1.4.1.3854.2.5.5.1.4 | INTEGER | read-only | mandatory |
| current4to20mASensorUnit OBJECT-TYPE The unit string | 1.3.6.1.4.1.3854.2.5.5.1.5 | DisplayString | read-write | mandatory |
| current4to20mASensorStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.2.5.5.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| current4to20mASensorGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.5.5.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| current4to20mASensorLowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.5.5.1.9 | INTEGER | read-write | mandatory |
| current4to20mASensorLowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.5.5.1.10 | INTEGER | read-write | mandatory |
| current4to20mASensorHighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.5.5.1.11 | INTEGER | read-write | mandatory |
| current4to20mASensorHighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.5.5.1.12 | INTEGER | read-write | mandatory |
| current4to20mASensorRearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.2.5.5.1.13 | INTEGER | read-write | mandatory |
| current4to20mASensorDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.2.5.5.1.14 | INTEGER (0..65534) | read-write | mandatory |
| current4to20mASensorDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.2.5.5.1.15 | INTEGER (0..65534) | read-write | mandatory |
| current4to20mASensorDelayLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.5.1.16 | INTEGER (0..65535) | read-write | mandatory |
| current4to20mASensorDelayLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.5.5.1.17 | INTEGER (0..65535) | read-write | mandatory |
| current4to20mASensorDelayHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.5.5.1.18 | INTEGER (0..65535) | read-write | mandatory |
| current4to20mASensorDelayHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.5.1.19 | INTEGER (0..65535) | read-write | mandatory |
| current4to20mASensorRaw OBJECT-TYPE The unformatted, raw, A/D value in this sensor. Contains more resolution than the formated percentage. This number can go from 0 to 1023 depending on the input voltage | 1.3.6.1.4.1.3854.2.5.5.1.20 | INTEGER | read-only | mandatory |
| current4to20mASensorOffset OBJECT-TYPE 4to20mA Offset reading | 1.3.6.1.4.1.3854.2.5.5.1.21 | INTEGER | read-write | mandatory |
| current4to20mASensorAmountMaxVoltage OBJECT-TYPE The maximum scale of 4to20mA conversion. | 1.3.6.1.4.1.3854.2.5.5.1.33 | INTEGER | read-write | mandatory |
| current4to20mASensorAmountBaseVoltage OBJECT-TYPE The base scale of 4to20mA conversion. | 1.3.6.1.4.1.3854.2.5.5.1.34 | INTEGER | read-write | mandatory |
| current4to20mASensorPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.5.5.1.35 | INTEGER (0..65534) | read-only | mandatory |
| current4to20mASensorSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.5.5.1.36 | INTEGER (0..65534) | read-only | mandatory |
| current4to20mASensorDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.5.5.1.37 | INTEGER (0..65534) | read-only | mandatory |
| current4to20mASensorMaxVoltage OBJECT-TYPE The max range for use in conversion. | 1.3.6.1.4.1.3854.2.5.5.1.43 | INTEGER | read-write | mandatory |
| current4to20mASensorBaseVoltage OBJECT-TYPE The base range for use in conversion. | 1.3.6.1.4.1.3854.2.5.5.1.44 | INTEGER | read-write | mandatory |
| current4to20mASensorDisplayStyle OBJECT-TYPE 4to20mA display style | 1.3.6.1.4.1.3854.2.5.5.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| current4to20mASensorHighCriticalDesc OBJECT-TYPE A HighCritical Description of this sensor | 1.3.6.1.4.1.3854.2.5.5.1.46 | DisplayString | read-write | mandatory |
| current4to20mASensorLowCriticalDesc OBJECT-TYPE A LowCritical Description of this sensor | 1.3.6.1.4.1.3854.2.5.5.1.47 | DisplayString | read-write | mandatory |
| current4to20mASensorNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.5.5.1.48 | DisplayString | read-write | mandatory |
| current4to20mASensorLowWarningDesc OBJECT-TYPE A LowWarning Description of this sensor | 1.3.6.1.4.1.3854.2.5.5.1.49 | DisplayString | read-write | mandatory |
| current4to20mASensorHighWarningDesc OBJECT-TYPE A HighWarning Description of this sensor | 1.3.6.1.4.1.3854.2.5.5.1.50 | DisplayString | read-write | mandatory |
| current4to20mASensorSensorErrorDesc OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.5.5.1.51 | DisplayString | read-write | mandatory |
| current4to20mASensorHighCriticalColor OBJECT-TYPE A HighCritical Color of this sensor | 1.3.6.1.4.1.3854.2.5.5.1.54 | INTEGER | read-write | mandatory |
| current4to20mASensorLowCriticalColor OBJECT-TYPE A LowCritical Color of this sensor | 1.3.6.1.4.1.3854.2.5.5.1.55 | INTEGER | read-write | mandatory |
| current4to20mASensorNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.5.5.1.56 | INTEGER | read-write | mandatory |
| current4to20mASensorLowWarningColor OBJECT-TYPE A LowWarning Color of this sensor | 1.3.6.1.4.1.3854.2.5.5.1.57 | INTEGER | read-write | mandatory |
| current4to20mASensorHighWarningColor OBJECT-TYPE A HighWarning Color of this sensor | 1.3.6.1.4.1.3854.2.5.5.1.58 | INTEGER | read-write | mandatory |
| current4to20mASensorSensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.5.5.1.59 | INTEGER | read-write | mandatory |
| current4to20mASensorAcknowledge OBJECT-TYPE 4to20mA sensor acknowledge | 1.3.6.1.4.1.3854.2.5.5.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| current4to20mASensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.5.1.1000 | INTEGER | read-only | mandatory |
| dcVoltageSensorTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.5.6 | not-accessible | mandatory | |
| dcVoltageSensorEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.5.6.1 | not-accessible | mandatory | |
| dcVoltageSensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.6.1.1 | DisplayString | read-only | mandatory |
| dcVoltageSensorDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.5.6.1.2 | DisplayString | read-write | mandatory |
| dcVoltageSensorValue OBJECT-TYPE The reading value in this sensor | 1.3.6.1.4.1.3854.2.5.6.1.4 | INTEGER | read-only | mandatory |
| dcVoltageSensorUnit OBJECT-TYPE The unit string | 1.3.6.1.4.1.3854.2.5.6.1.5 | DisplayString | read-write | mandatory |
| dcVoltageSensorStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.2.5.6.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| dcVoltageSensorGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.5.6.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| dcVoltageSensorLowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.5.6.1.9 | INTEGER | read-write | mandatory |
| dcVoltageSensorLowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.5.6.1.10 | INTEGER | read-write | mandatory |
| dcVoltageSensorHighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.5.6.1.11 | INTEGER | read-write | mandatory |
| dcVoltageSensorHighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.5.6.1.12 | INTEGER | read-write | mandatory |
| dcVoltageSensorRearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.2.5.6.1.13 | INTEGER | read-write | mandatory |
| dcVoltageSensorDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.2.5.6.1.14 | INTEGER (0..65534) | read-write | mandatory |
| dcVoltageSensorDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.2.5.6.1.15 | INTEGER (0..65534) | read-write | mandatory |
| dcVoltageSensorDelayLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.6.1.16 | INTEGER (0..65535) | read-write | mandatory |
| dcVoltageSensorDelayLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.5.6.1.17 | INTEGER (0..65535) | read-write | mandatory |
| dcVoltageSensorDelayHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.5.6.1.18 | INTEGER (0..65535) | read-write | mandatory |
| dcVoltageSensorDelayHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.6.1.19 | INTEGER (0..65535) | read-write | mandatory |
| dcVoltageSensorRaw OBJECT-TYPE The unformatted, raw, A/D value in this sensor. Contains more resolution than the formated percentage. This number can go from 0 to 1023 depending on the input voltage | 1.3.6.1.4.1.3854.2.5.6.1.20 | INTEGER | read-only | mandatory |
| dcVoltageSensorOffset OBJECT-TYPE DC voltage Offset reading | 1.3.6.1.4.1.3854.2.5.6.1.21 | INTEGER | read-write | mandatory |
| dcVoltageSensorJumper OBJECT-TYPE Selected voltage scale (jumper 0) in DC voltage conversion. | 1.3.6.1.4.1.3854.2.5.6.1.32 | INTEGER {jumperAt-60(-600), jumperAt-40(-400), jumperAt-30(-300), jumperAt-20(-200), jumperAt-10(-100), jumperAt10(100), jumperAt20(200), jumperAt30(300), jumperAt40(400), jumperAt60(600)} | read-write | mandatory |
| dcVoltageSensorAmountMaxVoltage OBJECT-TYPE The maximum scale of DC voltage conversion. | 1.3.6.1.4.1.3854.2.5.6.1.33 | INTEGER | read-write | mandatory |
| dcVoltageSensorAmountBaseVoltage OBJECT-TYPE The base scale of DC voltage conversion. | 1.3.6.1.4.1.3854.2.5.6.1.34 | INTEGER | read-write | mandatory |
| dcVoltageSensorPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.5.6.1.35 | INTEGER (0..65534) | read-only | mandatory |
| dcVoltageSensorSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.5.6.1.36 | INTEGER (0..65534) | read-only | mandatory |
| dcVoltageSensorDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.5.6.1.37 | INTEGER (0..65534) | read-only | mandatory |
| dcVoltageSensorMaxVoltage OBJECT-TYPE The max voltage range for use in conversion. | 1.3.6.1.4.1.3854.2.5.6.1.43 | INTEGER | read-write | mandatory |
| dcVoltageSensorBaseVoltage OBJECT-TYPE The base voltage range for use in conversion. | 1.3.6.1.4.1.3854.2.5.6.1.44 | INTEGER | read-write | mandatory |
| dcVoltageSensorDisplayStyle OBJECT-TYPE DCVoltage display style | 1.3.6.1.4.1.3854.2.5.6.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| dcVoltageSensorHighCriticalDesc OBJECT-TYPE A HighCritical Description of this sensor | 1.3.6.1.4.1.3854.2.5.6.1.46 | DisplayString | read-write | mandatory |
| dcVoltageSensorLowCriticalDesc OBJECT-TYPE A LowCritical Description of this sensor | 1.3.6.1.4.1.3854.2.5.6.1.47 | DisplayString | read-write | mandatory |
| dcVoltageSensorNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.5.6.1.48 | DisplayString | read-write | mandatory |
| dcVoltageSensorLowWarningDesc OBJECT-TYPE A LowWarning Description of this sensor | 1.3.6.1.4.1.3854.2.5.6.1.49 | DisplayString | read-write | mandatory |
| dcVoltageSensorHighWarningDesc OBJECT-TYPE A HighWarning Description of this sensor | 1.3.6.1.4.1.3854.2.5.6.1.50 | DisplayString | read-write | mandatory |
| dcVoltageSensorSensorErrorDesc OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.5.6.1.51 | DisplayString | read-write | mandatory |
| dcVoltageSensorHighCriticalColor OBJECT-TYPE A HighCritical Color of this sensor | 1.3.6.1.4.1.3854.2.5.6.1.54 | INTEGER | read-write | mandatory |
| dcVoltageSensorLowCriticalColor OBJECT-TYPE A LowCritical Color of this sensor | 1.3.6.1.4.1.3854.2.5.6.1.55 | INTEGER | read-write | mandatory |
| dcVoltageSensorNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.5.6.1.56 | INTEGER | read-write | mandatory |
| dcVoltageSensorLowWarningColor OBJECT-TYPE A LowWarning Color of this sensor | 1.3.6.1.4.1.3854.2.5.6.1.57 | INTEGER | read-write | mandatory |
| dcVoltageSensorHighWarningColor OBJECT-TYPE A HighWarning Color of this sensor | 1.3.6.1.4.1.3854.2.5.6.1.58 | INTEGER | read-write | mandatory |
| dcVoltageSensorSensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.5.6.1.59 | INTEGER | read-write | mandatory |
| dcVoltageSensorAcknowledge OBJECT-TYPE DCvoltage sensor acknowledge | 1.3.6.1.4.1.3854.2.5.6.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| dcVoltageSensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.6.1.1000 | INTEGER | read-only | mandatory |
| airflowSensorTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.5.7 | not-accessible | mandatory | |
| airflowSensorEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.5.7.1 | not-accessible | mandatory | |
| airflowSensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.7.1.1 | DisplayString | read-only | mandatory |
| airflowSensorDescription OBJECT-TYPE A Description of this sensor Switch | 1.3.6.1.4.1.3854.2.5.7.1.2 | DisplayString | read-write | mandatory |
| airflowSensorValue OBJECT-TYPE The reading value in this sensor | 1.3.6.1.4.1.3854.2.5.7.1.4 | INTEGER | read-only | mandatory |
| airflowSensorStatus OBJECT-TYPE The current status of this Sensor, only input switches have a status | 1.3.6.1.4.1.3854.2.5.7.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| airflowSensorGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.5.7.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| airflowSensorLowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.5.7.1.9 | INTEGER | read-write | mandatory |
| airflowSensorLowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.5.7.1.10 | INTEGER | read-write | mandatory |
| airflowSensorHighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.5.7.1.11 | INTEGER | read-write | mandatory |
| airflowSensorHighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.5.7.1.12 | INTEGER | read-write | mandatory |
| airflowSensorRearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.2.5.7.1.13 | INTEGER | read-write | mandatory |
| airflowSensorDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.2.5.7.1.14 | INTEGER (0..65534) | read-write | mandatory |
| airflowSensorDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.2.5.7.1.15 | INTEGER (0..65534) | read-write | mandatory |
| airflowSensorDelayLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.7.1.16 | INTEGER (0..65535) | read-write | mandatory |
| airflowSensorDelayLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.5.7.1.17 | INTEGER (0..65535) | read-write | mandatory |
| airflowSensorDelayHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.5.7.1.18 | INTEGER (0..65535) | read-write | mandatory |
| airflowSensorDelayHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.7.1.19 | INTEGER (0..65535) | read-write | mandatory |
| airflowSensorRaw OBJECT-TYPE The unformatted, raw, A/D value in this sensor. Contains more resolution than the formated percentage. This number can go from 0 to 1023 depending on the input voltage | 1.3.6.1.4.1.3854.2.5.7.1.20 | INTEGER | read-only | mandatory |
| airflowSensorPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.5.7.1.35 | INTEGER (0..65534) | read-only | mandatory |
| airflowSensorSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.5.7.1.36 | INTEGER (0..65534) | read-only | mandatory |
| airflowSensorDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.5.7.1.37 | INTEGER (0..65534) | read-only | mandatory |
| airflowSensorDisplayStyle OBJECT-TYPE Airflow display style | 1.3.6.1.4.1.3854.2.5.7.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| airflowSensorHighCriticalDesc OBJECT-TYPE A HighCritical Description of this sensor | 1.3.6.1.4.1.3854.2.5.7.1.46 | DisplayString | read-write | mandatory |
| airflowSensorLowCriticalDesc OBJECT-TYPE A LowCritical Description of this sensor | 1.3.6.1.4.1.3854.2.5.7.1.47 | DisplayString | read-write | mandatory |
| airflowSensorNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.5.7.1.48 | DisplayString | read-write | mandatory |
| airflowSensorLowWarningDesc OBJECT-TYPE A LowWarning Description of this sensor | 1.3.6.1.4.1.3854.2.5.7.1.49 | DisplayString | read-write | mandatory |
| airflowSensorHighWarningDesc OBJECT-TYPE A HighWarning Description of this sensor | 1.3.6.1.4.1.3854.2.5.7.1.50 | DisplayString | read-write | mandatory |
| airflowSensorSensorErrorDesc OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.5.7.1.51 | DisplayString | read-write | mandatory |
| airflowSensorHighCriticalColor OBJECT-TYPE A HighCritical Color of this sensor | 1.3.6.1.4.1.3854.2.5.7.1.54 | INTEGER | read-write | mandatory |
| airflowSensorLowCriticalColor OBJECT-TYPE A LowCritical Color of this sensor | 1.3.6.1.4.1.3854.2.5.7.1.55 | INTEGER | read-write | mandatory |
| airflowSensorNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.5.7.1.56 | INTEGER | read-write | mandatory |
| airflowSensorLowWarningColor OBJECT-TYPE A LowWarning Color of this sensor | 1.3.6.1.4.1.3854.2.5.7.1.57 | INTEGER | read-write | mandatory |
| airflowSensorHighWarningColor OBJECT-TYPE A HighWarning Color of this sensor | 1.3.6.1.4.1.3854.2.5.7.1.58 | INTEGER | read-write | mandatory |
| airflowSensorSensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.5.7.1.59 | INTEGER | read-write | mandatory |
| airflowSensorAcknowledge OBJECT-TYPE Airflow sensor acknowledge | 1.3.6.1.4.1.3854.2.5.7.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| airflowSensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.7.1.1000 | INTEGER | read-only | mandatory |
| motionSensorTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.5.8 | not-accessible | mandatory | |
| motionSensorEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.5.8.1 | not-accessible | mandatory | |
| motionSensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.8.1.1 | DisplayString | read-only | mandatory |
| motionSensorDescription OBJECT-TYPE A Description of this sensor Switch | 1.3.6.1.4.1.3854.2.5.8.1.2 | DisplayString | read-write | mandatory |
| motionSensorStatus OBJECT-TYPE The current status of this Sensor, only input switches have a status | 1.3.6.1.4.1.3854.2.5.8.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| motionSensorGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.5.8.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| motionSensorPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.5.8.1.35 | INTEGER (0..65534) | read-only | mandatory |
| motionSensorSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.5.8.1.36 | INTEGER (0..65534) | read-only | mandatory |
| motionSensorDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.5.8.1.37 | INTEGER (0..65534) | read-only | mandatory |
| motionSensorCriticalDesc OBJECT-TYPE A Critical Description of this sensor | 1.3.6.1.4.1.3854.2.5.8.1.46 | DisplayString | read-write | mandatory |
| motionSensorNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.5.8.1.48 | DisplayString | read-write | mandatory |
| motionSensorCriticalColor OBJECT-TYPE A Critical Color of this sensor | 1.3.6.1.4.1.3854.2.5.8.1.54 | INTEGER | read-write | mandatory |
| motionSensorNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.5.8.1.56 | INTEGER | read-write | mandatory |
| motionSensorAcknowledge OBJECT-TYPE Motion sensor acknowledge | 1.3.6.1.4.1.3854.2.5.8.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| motionSensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.8.1.1000 | INTEGER | read-only | mandatory |
| waterSensorTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.5.9 | not-accessible | mandatory | |
| waterSensorEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.5.9.1 | not-accessible | mandatory | |
| waterSensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.9.1.1 | DisplayString | read-only | mandatory |
| waterSensorDescription OBJECT-TYPE A Description of this sensor Switch | 1.3.6.1.4.1.3854.2.5.9.1.2 | DisplayString | read-write | mandatory |
| waterSensorStatus OBJECT-TYPE The current status of this Sensor, only input switches have a status | 1.3.6.1.4.1.3854.2.5.9.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| waterSensorGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.5.9.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| waterSensorPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.5.9.1.35 | INTEGER (0..65534) | read-only | mandatory |
| waterSensorSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.5.9.1.36 | INTEGER (0..65534) | read-only | mandatory |
| waterSensorDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.5.9.1.37 | INTEGER (0..65534) | read-only | mandatory |
| waterSensorCriticalDesc OBJECT-TYPE A Critical Description of this sensor | 1.3.6.1.4.1.3854.2.5.9.1.46 | DisplayString | read-write | mandatory |
| waterSensorNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.5.9.1.48 | DisplayString | read-write | mandatory |
| waterSensorCriticalColor OBJECT-TYPE A Critical Color of this sensor | 1.3.6.1.4.1.3854.2.5.9.1.54 | INTEGER | read-write | mandatory |
| waterSensorNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.5.9.1.56 | INTEGER | read-write | mandatory |
| waterSensorAcknowledge OBJECT-TYPE Water sensor acknowledge | 1.3.6.1.4.1.3854.2.5.9.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| waterSensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.9.1.1000 | INTEGER | read-only | mandatory |
| securitySensorTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.5.10 | not-accessible | mandatory | |
| securitySensorEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.5.10.1 | not-accessible | mandatory | |
| securitySensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.10.1.1 | DisplayString | read-only | mandatory |
| securitySensorDescription OBJECT-TYPE A Description of this sensor Switch | 1.3.6.1.4.1.3854.2.5.10.1.2 | DisplayString | read-write | mandatory |
| securitySensorStatus OBJECT-TYPE The current status of this Sensor, only input switches have a status | 1.3.6.1.4.1.3854.2.5.10.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| securitySensorGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.5.10.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| securitySensorPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.5.10.1.35 | INTEGER (0..65534) | read-only | mandatory |
| securitySensorSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.5.10.1.36 | INTEGER (0..65534) | read-only | mandatory |
| securitySensorDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.5.10.1.37 | INTEGER (0..65534) | read-only | mandatory |
| securitySensorCriticalDesc OBJECT-TYPE A Critical Description of this sensor | 1.3.6.1.4.1.3854.2.5.10.1.46 | DisplayString | read-write | mandatory |
| securitySensorNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.5.10.1.48 | DisplayString | read-write | mandatory |
| securitySensorCriticalColor OBJECT-TYPE A Critical Color of this sensor | 1.3.6.1.4.1.3854.2.5.10.1.54 | INTEGER | read-write | mandatory |
| securitySensorNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.5.10.1.56 | INTEGER | read-write | mandatory |
| securitySensorAcknowledge OBJECT-TYPE Security sensor acknowledge | 1.3.6.1.4.1.3854.2.5.10.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| securitySensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.10.1.1000 | INTEGER | read-only | mandatory |
| sirenSensorTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.5.11 | not-accessible | mandatory | |
| sirenSensorEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.5.11.1 | not-accessible | mandatory | |
| sirenSensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.11.1.1 | DisplayString | read-only | mandatory |
| sirenSensorDescription OBJECT-TYPE A Description of this sensor Switch | 1.3.6.1.4.1.3854.2.5.11.1.2 | DisplayString | read-write | mandatory |
| sirenSensorStatus OBJECT-TYPE The current status of this Sensor, only input switches have a status | 1.3.6.1.4.1.3854.2.5.11.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sirenSensorGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.5.11.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| sirenSensorControlMode OBJECT-TYPE Control Mode used for selecting the mode to control a siren. | 1.3.6.1.4.1.3854.2.5.11.1.24 | INTEGER {manual-control(0), sensor-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| sirenSensorManualCycleTime OBJECT-TYPE Toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.2.5.11.1.25 | INTEGER (1..255) | read-write | mandatory |
| sirenSensorManualAction OBJECT-TYPE Control the siren manualy | 1.3.6.1.4.1.3854.2.5.11.1.26 | INTEGER {turn-On(0), turn-Off(1), cycle-On-Off-On(2), cycle-Off-On-Off(3)} | read-write | mandatory |
| sirenSensorPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.5.11.1.35 | INTEGER (0..65534) | read-only | mandatory |
| sirenSensorSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.5.11.1.36 | INTEGER (0..65534) | read-only | mandatory |
| sirenSensorDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.5.11.1.37 | INTEGER (0..65534) | read-only | mandatory |
| sirenSensorOnDesc OBJECT-TYPE A On Description of this sensor | 1.3.6.1.4.1.3854.2.5.11.1.52 | DisplayString | read-write | mandatory |
| sirenSensorOffDesc OBJECT-TYPE A Off Description of this sensor | 1.3.6.1.4.1.3854.2.5.11.1.53 | DisplayString | read-write | mandatory |
| sirenSensorOnColor OBJECT-TYPE A On Color of this sensor | 1.3.6.1.4.1.3854.2.5.11.1.60 | INTEGER | read-write | mandatory |
| sirenSensorOffColor OBJECT-TYPE A Off Color of this sensor | 1.3.6.1.4.1.3854.2.5.11.1.61 | INTEGER | read-write | mandatory |
| sirenSensorAcknowledge OBJECT-TYPE Siren sensor acknowledge | 1.3.6.1.4.1.3854.2.5.11.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| sirenSensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.11.1.1000 | INTEGER | read-only | mandatory |
| relaySensorTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.5.12 | not-accessible | mandatory | |
| relaySensorEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.5.12.1 | not-accessible | mandatory | |
| relaySensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.12.1.1 | DisplayString | read-only | mandatory |
| relaySensorDescription OBJECT-TYPE A Description of this sensor Switch | 1.3.6.1.4.1.3854.2.5.12.1.2 | DisplayString | read-write | mandatory |
| relaySensorType OBJECT-TYPE Enter the type of this Sensor | 1.3.6.1.4.1.3854.2.5.12.1.3 | INTEGER {relay(13), xrelay(19)} | read-only | mandatory |
| relaySensorStatus OBJECT-TYPE The current status of this Sensor, only input switches have a status | 1.3.6.1.4.1.3854.2.5.12.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| relaySensorGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.5.12.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| relaySensorControlMode OBJECT-TYPE Control Mode used for selecting the mode to control a relay. | 1.3.6.1.4.1.3854.2.5.12.1.24 | INTEGER {manual-control(0), sensor-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| relaySensorManualCycleTime OBJECT-TYPE Toggle period in seconds for Manual Cycle action. | 1.3.6.1.4.1.3854.2.5.12.1.25 | INTEGER (1..255) | read-write | mandatory |
| relaySensorManualAction OBJECT-TYPE Control the relay manualy | 1.3.6.1.4.1.3854.2.5.12.1.26 | INTEGER {turn-On(0), turn-Off(1), cycle-On-Off-On(2), cycle-Off-On-Off(3)} | read-write | mandatory |
| relaySensorPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.5.12.1.35 | INTEGER (0..65534) | read-only | mandatory |
| relaySensorSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.5.12.1.36 | INTEGER (0..65534) | read-only | mandatory |
| relaySensorDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.5.12.1.37 | INTEGER (0..65534) | read-only | mandatory |
| relaySensorOnDesc OBJECT-TYPE A On Description of this sensor | 1.3.6.1.4.1.3854.2.5.12.1.52 | DisplayString | read-write | mandatory |
| relaySensorOffDesc OBJECT-TYPE A Off Description of this sensor | 1.3.6.1.4.1.3854.2.5.12.1.53 | DisplayString | read-write | mandatory |
| relaySensorOnColor OBJECT-TYPE A On Color of this sensor | 1.3.6.1.4.1.3854.2.5.12.1.60 | INTEGER | read-write | mandatory |
| relaySensorOffColor OBJECT-TYPE A Off Color of this sensor | 1.3.6.1.4.1.3854.2.5.12.1.61 | INTEGER | read-write | mandatory |
| relaySensorAcknowledge OBJECT-TYPE Relay sensor acknowledge | 1.3.6.1.4.1.3854.2.5.12.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| relaySensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.12.1.1000 | INTEGER | read-only | mandatory |
| acVoltageSensorTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.5.13 | not-accessible | mandatory | |
| acVoltageSensorEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.5.13.1 | not-accessible | mandatory | |
| acVoltageSensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.13.1.1 | DisplayString | read-only | mandatory |
| acVoltageSensorDescription OBJECT-TYPE A Description of this sensor Switch | 1.3.6.1.4.1.3854.2.5.13.1.2 | DisplayString | read-write | mandatory |
| acVoltageSensorStatus OBJECT-TYPE The current status of this Sensor, only input switches have a status | 1.3.6.1.4.1.3854.2.5.13.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| acVoltageSensorGoOffline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.2.5.13.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| acVoltageSensorPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.5.13.1.35 | INTEGER (0..65534) | read-only | mandatory |
| acVoltageSensorSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.5.13.1.36 | INTEGER (0..65534) | read-only | mandatory |
| acVoltageSensorDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.5.13.1.37 | INTEGER (0..65534) | read-only | mandatory |
| acVoltageSensorCriticalDesc OBJECT-TYPE A Critical Description of this sensor | 1.3.6.1.4.1.3854.2.5.13.1.46 | DisplayString | read-write | mandatory |
| acVoltageSensorNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.5.13.1.48 | DisplayString | read-write | mandatory |
| acVoltageSensorCriticalColor OBJECT-TYPE A Critical Color of this sensor | 1.3.6.1.4.1.3854.2.5.13.1.54 | INTEGER | read-write | mandatory |
| acVoltageSensorNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.5.13.1.56 | INTEGER | read-write | mandatory |
| acVoltageSensorAcknowledge OBJECT-TYPE ACvoltage sensor acknowledge | 1.3.6.1.4.1.3854.2.5.13.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| acVoltageSensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.13.1.1000 | INTEGER | read-only | mandatory |
| smokeSensorTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.5.14 | not-accessible | mandatory | |
| smokeSensorEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.5.14.1 | not-accessible | mandatory | |
| smokeSensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.14.1.1 | DisplayString | read-only | mandatory |
| smokeSensorDescription OBJECT-TYPE A Description of this sensor Switch | 1.3.6.1.4.1.3854.2.5.14.1.2 | DisplayString | read-write | mandatory |
| smokeSensorStatus OBJECT-TYPE The current status of this Sensor, only input switches have a status | 1.3.6.1.4.1.3854.2.5.14.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| smokeSensorGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.5.14.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| smokeSensorPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.5.14.1.35 | INTEGER (0..65534) | read-only | mandatory |
| smokeSensorSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.5.14.1.36 | INTEGER (0..65534) | read-only | mandatory |
| smokeSensorDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.5.14.1.37 | INTEGER (0..65534) | read-only | mandatory |
| smokeSensorCriticalDesc OBJECT-TYPE A Critical Description of this sensor | 1.3.6.1.4.1.3854.2.5.14.1.46 | DisplayString | read-write | mandatory |
| smokeSensorNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.5.14.1.48 | DisplayString | read-write | mandatory |
| smokeSensorCriticalColor OBJECT-TYPE A Critical Color of this sensor | 1.3.6.1.4.1.3854.2.5.14.1.54 | INTEGER | read-write | mandatory |
| smokeSensorNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.5.14.1.56 | INTEGER | read-write | mandatory |
| smokeSensorAcknowledge OBJECT-TYPE Smoke sensor acknowledge | 1.3.6.1.4.1.3854.2.5.14.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| smokeSensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.14.1.1000 | INTEGER | read-only | mandatory |
| thermostatSensorTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.5.20 | not-accessible | mandatory | |
| thermostatSensorEntry OBJECT-TYPE This is an entry in the sensorTemperatureEntry Table | 1.3.6.1.4.1.3854.2.5.20.1 | not-accessible | mandatory | |
| thermostatSensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.20.1.1 | DisplayString | read-only | mandatory |
| thermostatSensorDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.5.20.1.2 | DisplayString | read-write | mandatory |
| thermostatSensorDegree OBJECT-TYPE The degrees in this sensor | 1.3.6.1.4.1.3854.2.5.20.1.4 | INTEGER | read-only | mandatory |
| thermostatSensorStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.2.5.20.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| thermostatSensorGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.5.20.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| thermostatSensorLowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.5.20.1.9 | INTEGER | read-write | mandatory |
| thermostatSensorLowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.5.20.1.10 | INTEGER | read-write | mandatory |
| thermostatSensorHighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.5.20.1.11 | INTEGER | read-write | mandatory |
| thermostatSensorHighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.5.20.1.12 | INTEGER | read-write | mandatory |
| thermostatSensorRearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.2.5.20.1.13 | INTEGER | read-write | mandatory |
| thermostatSensorDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.2.5.20.1.14 | INTEGER (0..65534) | read-write | mandatory |
| thermostatSensorDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.2.5.20.1.15 | INTEGER (0..65534) | read-write | mandatory |
| thermostatSensorDelayLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.20.1.16 | INTEGER (0..65535) | read-write | mandatory |
| thermostatSensorDelayLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.5.20.1.17 | INTEGER (0..65535) | read-write | mandatory |
| thermostatSensorDelayHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.5.20.1.18 | INTEGER (0..65535) | read-write | mandatory |
| thermostatSensorDelayHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.20.1.19 | INTEGER (0..65535) | read-write | mandatory |
| thermostatSensorPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.5.20.1.35 | INTEGER (0..65534) | read-only | mandatory |
| thermostatSensorSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.5.20.1.36 | INTEGER (0..65534) | read-only | mandatory |
| thermostatSensorDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.5.20.1.37 | INTEGER (0..65534) | read-only | mandatory |
| thermostatSensorDisplayStyle OBJECT-TYPE Thermostat display style | 1.3.6.1.4.1.3854.2.5.20.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| thermostatSensorHighCriticalDesc OBJECT-TYPE A HighCritical Description of this sensor | 1.3.6.1.4.1.3854.2.5.20.1.46 | DisplayString | read-write | mandatory |
| thermostatSensorLowCriticalDesc OBJECT-TYPE A LowCritical Description of this sensor | 1.3.6.1.4.1.3854.2.5.20.1.47 | DisplayString | read-write | mandatory |
| thermostatSensorNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.5.20.1.48 | DisplayString | read-write | mandatory |
| thermostatSensorLowWarningDesc OBJECT-TYPE A LowWarning Description of this sensor | 1.3.6.1.4.1.3854.2.5.20.1.49 | DisplayString | read-write | mandatory |
| thermostatSensorHighWarningDesc OBJECT-TYPE A HighWarning Description of this sensor | 1.3.6.1.4.1.3854.2.5.20.1.50 | DisplayString | read-write | mandatory |
| thermostatSensorSensorErrorDesc OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.5.20.1.51 | DisplayString | read-write | mandatory |
| thermostatSensorHighCriticalColor OBJECT-TYPE A HighCritical Color of this sensor | 1.3.6.1.4.1.3854.2.5.20.1.54 | INTEGER | read-write | mandatory |
| thermostatSensorLowCriticalColor OBJECT-TYPE A LowCritical Color of this sensor | 1.3.6.1.4.1.3854.2.5.20.1.55 | INTEGER | read-write | mandatory |
| thermostatSensorNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.5.20.1.56 | INTEGER | read-write | mandatory |
| thermostatSensorLowWarningColor OBJECT-TYPE A LowWarning Color of this sensor | 1.3.6.1.4.1.3854.2.5.20.1.57 | INTEGER | read-write | mandatory |
| thermostatSensorHighWarningColor OBJECT-TYPE A HighWarning Color of this sensor | 1.3.6.1.4.1.3854.2.5.20.1.58 | INTEGER | read-write | mandatory |
| thermostatSensorSensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.5.20.1.59 | INTEGER | read-write | mandatory |
| thermostatSensorAcknowledge OBJECT-TYPE Thermostat sensor acknowledge | 1.3.6.1.4.1.3854.2.5.20.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| thermostatSensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.20.1.1000 | INTEGER | read-only | mandatory |
| waterRopeSensorTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.5.21 | not-accessible | mandatory | |
| waterRopeSensorEntry OBJECT-TYPE This is an entry in the waterRopeSensorEntry Table | 1.3.6.1.4.1.3854.2.5.21.1 | not-accessible | mandatory | |
| waterRopeSensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.21.1.1 | DisplayString | read-only | mandatory |
| waterRopeSensorDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.5.21.1.2 | DisplayString | read-write | mandatory |
| waterRopeSensorLeakLocation OBJECT-TYPE Location of leakage of water rope sensor. | 1.3.6.1.4.1.3854.2.5.21.1.4 | INTEGER | read-only | mandatory |
| waterRopeSensorUnit OBJECT-TYPE Display unit of water rope sensor. | 1.3.6.1.4.1.3854.2.5.21.1.5 | DisplayString | read-write | mandatory |
| waterRopeSensorStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.2.5.21.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), sensorError(7)} | read-only | mandatory |
| waterRopeSensorGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.5.21.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| waterRopeSensorRaw OBJECT-TYPE Raw value of location or length in ohms | 1.3.6.1.4.1.3854.2.5.21.1.20 | INTEGER | read-only | mandatory |
| waterRopeSensorDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.5.21.1.37 | INTEGER (0..65534) | read-only | mandatory |
| waterRopeSensorCriticalDesc OBJECT-TYPE A Critical Description of this sensor | 1.3.6.1.4.1.3854.2.5.21.1.46 | DisplayString | read-write | mandatory |
| waterRopeSensorNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.5.21.1.48 | DisplayString | read-write | mandatory |
| waterRopeSensorSensorErrorDesc OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.5.21.1.51 | DisplayString | read-write | mandatory |
| waterRopeSensorCriticalColor OBJECT-TYPE A Critical Color of this sensor | 1.3.6.1.4.1.3854.2.5.21.1.54 | INTEGER | read-write | mandatory |
| waterRopeSensorNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.5.21.1.56 | INTEGER | read-write | mandatory |
| waterRopeSensorSensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.5.21.1.59 | INTEGER | read-write | mandatory |
| waterRopeSensorAcknowledge OBJECT-TYPE Water Rope sensor acknowledge | 1.3.6.1.4.1.3854.2.5.21.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| waterRopeSensorLength OBJECT-TYPE Length of water rope sensor. | 1.3.6.1.4.1.3854.2.5.21.1.100 | INTEGER | read-only | mandatory |
| waterRopeSensorImpedance OBJECT-TYPE Sensing wire impedance per meter value times 100 | 1.3.6.1.4.1.3854.2.5.21.1.101 | INTEGER (0..65535) | read-write | mandatory |
| waterRopeSensorType OBJECT-TYPE Water rope sensing cable type | 1.3.6.1.4.1.3854.2.5.21.1.103 | INTEGER {custom(0), water(1), fuel(2)} | read-write | mandatory |
| waterRopeSensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.21.1.1000 | INTEGER | read-only | mandatory |
| powerSensorTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.5.22 | not-accessible | mandatory | |
| powerSensorEntry OBJECT-TYPE This is an entry in the powerSensorEntry Table | 1.3.6.1.4.1.3854.2.5.22.1 | not-accessible | mandatory | |
| powerSensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.22.1.1 | DisplayString | read-only | mandatory |
| powerSensorDescription OBJECT-TYPE A Description of this sensor Switch | 1.3.6.1.4.1.3854.2.5.22.1.2 | DisplayString | read-write | mandatory |
| powerSensorValue OBJECT-TYPE The reading value in this sensor | 1.3.6.1.4.1.3854.2.5.22.1.4 | INTEGER | read-only | mandatory |
| powerSensorUnit OBJECT-TYPE The unit string | 1.3.6.1.4.1.3854.2.5.22.1.5 | DisplayString | read-write | mandatory |
| powerSensorStatus OBJECT-TYPE The current status of this Sensor, only input switches have a status | 1.3.6.1.4.1.3854.2.5.22.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7)} | read-only | mandatory |
| powerSensorGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.5.22.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| powerSensorLowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.5.22.1.9 | INTEGER | read-write | mandatory |
| powerSensorLowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.5.22.1.10 | INTEGER | read-write | mandatory |
| powerSensorHighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.5.22.1.11 | INTEGER | read-write | mandatory |
| powerSensorHighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.5.22.1.12 | INTEGER | read-write | mandatory |
| powerSensorRearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.2.5.22.1.13 | INTEGER | read-write | mandatory |
| powerSensorDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.2.5.22.1.14 | INTEGER (0..65534) | read-write | mandatory |
| powerSensorDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.2.5.22.1.15 | INTEGER (0..65534) | read-write | mandatory |
| powerSensorDelayLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.22.1.16 | INTEGER (0..65535) | read-write | mandatory |
| powerSensorDelayLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.5.22.1.17 | INTEGER (0..65535) | read-write | mandatory |
| powerSensorDelayHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.5.22.1.18 | INTEGER (0..65535) | read-write | mandatory |
| powerSensorDelayHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.22.1.19 | INTEGER (0..65535) | read-write | mandatory |
| powerSensorPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.5.22.1.35 | INTEGER (0..65534) | read-only | mandatory |
| powerSensorSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.5.22.1.36 | INTEGER (0..65534) | read-only | mandatory |
| powerSensorDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.5.22.1.37 | INTEGER (0..65534) | read-only | mandatory |
| powerSensorTimeOut OBJECT-TYPE The polling timeout of Power Sensor. | 1.3.6.1.4.1.3854.2.5.22.1.38 | INTEGER (5..30) | read-write | mandatory |
| powerSensorInterval OBJECT-TYPE The polling interval of Power Sensor. | 1.3.6.1.4.1.3854.2.5.22.1.39 | INTEGER (5..720) | read-write | mandatory |
| powerSensorErrorRetryNum OBJECT-TYPE Number of retry before error. | 1.3.6.1.4.1.3854.2.5.22.1.40 | INTEGER | read-write | mandatory |
| powerSensorMaxValue OBJECT-TYPE The maximum scale of Power value. | 1.3.6.1.4.1.3854.2.5.22.1.41 | INTEGER | read-write | mandatory |
| powerSensorMinValue OBJECT-TYPE The minimum scale of Power value. | 1.3.6.1.4.1.3854.2.5.22.1.42 | INTEGER | read-write | mandatory |
| powerSensorDisplayStyle OBJECT-TYPE Power display style. | 1.3.6.1.4.1.3854.2.5.22.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| powerSensorHighCriticalDesc OBJECT-TYPE A HighCritical Description of this sensor | 1.3.6.1.4.1.3854.2.5.22.1.46 | DisplayString | read-write | mandatory |
| powerSensorLowCriticalDesc OBJECT-TYPE A LowCritical Description of this sensor | 1.3.6.1.4.1.3854.2.5.22.1.47 | DisplayString | read-write | mandatory |
| powerSensorNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.5.22.1.48 | DisplayString | read-write | mandatory |
| powerSensorLowWarningDesc OBJECT-TYPE A LowWarning Description of this sensor | 1.3.6.1.4.1.3854.2.5.22.1.49 | DisplayString | read-write | mandatory |
| powerSensorHighWarningDesc OBJECT-TYPE A HighWarning Description of this sensor | 1.3.6.1.4.1.3854.2.5.22.1.50 | DisplayString | read-write | mandatory |
| powerSensorSensorErrorDesc OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.5.22.1.51 | DisplayString | read-write | mandatory |
| powerSensorHighCriticalColor OBJECT-TYPE A HighCritical Color of this sensor | 1.3.6.1.4.1.3854.2.5.22.1.54 | INTEGER | read-write | mandatory |
| powerSensorLowCriticalColor OBJECT-TYPE A LowCritical Color of this sensor | 1.3.6.1.4.1.3854.2.5.22.1.55 | INTEGER | read-write | mandatory |
| powerSensorNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.5.22.1.56 | INTEGER | read-write | mandatory |
| powerSensorLowWarningColor OBJECT-TYPE A LowWarning Color of this sensor | 1.3.6.1.4.1.3854.2.5.22.1.57 | INTEGER | read-write | mandatory |
| powerSensorHighWarningColor OBJECT-TYPE A HighWarning Color of this sensor | 1.3.6.1.4.1.3854.2.5.22.1.58 | INTEGER | read-write | mandatory |
| powerSensorSensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.5.22.1.59 | INTEGER | read-write | mandatory |
| powerSensorValueFormatString OBJECT-TYPE The string-based reading value in this sensor | 1.3.6.1.4.1.3854.2.5.22.1.66 | DisplayString | read-only | mandatory |
| powerSensorValueFormatFloat OBJECT-TYPE The floating-point IEEE Standard 754 reading value in this sensor | 1.3.6.1.4.1.3854.2.5.22.1.67 | Opaque (SIZE(4)) | read-only | mandatory |
| powerSensorAcknowledge OBJECT-TYPE Power sensor acknowledge | 1.3.6.1.4.1.3854.2.5.22.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| powerSensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.22.1.1000 | INTEGER | read-only | mandatory |
| fuelSensorTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.5.24 | not-accessible | mandatory | |
| fuelSensorEntry OBJECT-TYPE This is an entry in the fuelSensorEntry Table | 1.3.6.1.4.1.3854.2.5.24.1 | not-accessible | mandatory | |
| fuelSensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.24.1.1 | DisplayString | read-only | mandatory |
| fuelSensorDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.5.24.1.2 | DisplayString | read-write | mandatory |
| fuelSensorValue OBJECT-TYPE The reading value in this sensor | 1.3.6.1.4.1.3854.2.5.24.1.4 | INTEGER | read-only | mandatory |
| fuelSensorUnit OBJECT-TYPE The unit string | 1.3.6.1.4.1.3854.2.5.24.1.5 | DisplayString | read-write | mandatory |
| fuelSensorStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.2.5.24.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| fuelSensorGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.5.24.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| fuelSensorLowCritical OBJECT-TYPE Level value of this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.5.24.1.9 | INTEGER | read-write | mandatory |
| fuelSensorLowWarning OBJECT-TYPE Level value of this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.5.24.1.10 | INTEGER | read-write | mandatory |
| fuelSensorHighWarning OBJECT-TYPE Level value of this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.5.24.1.11 | INTEGER | read-write | mandatory |
| fuelSensorHighCritical OBJECT-TYPE Level value of this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.5.24.1.12 | INTEGER | read-write | mandatory |
| fuelSensorRearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.2.5.24.1.13 | INTEGER | read-write | mandatory |
| fuelSensorDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.2.5.24.1.14 | INTEGER (0..65534) | read-write | mandatory |
| fuelSensorDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.2.5.24.1.15 | INTEGER (0..65534) | read-write | mandatory |
| fuelSensorDelayLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.24.1.16 | INTEGER (0..65535) | read-write | mandatory |
| fuelSensorDelayLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.5.24.1.17 | INTEGER (0..65535) | read-write | mandatory |
| fuelSensorDelayHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.5.24.1.18 | INTEGER (0..65535) | read-write | mandatory |
| fuelSensorDelayHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.24.1.19 | INTEGER (0..65535) | read-write | mandatory |
| fuelSensorRaw OBJECT-TYPE The unformatted, raw, A/D value in this sensor. Contains more resolution than the formated percentage. | 1.3.6.1.4.1.3854.2.5.24.1.20 | INTEGER | read-only | mandatory |
| fuelSensorAmountMaxValue OBJECT-TYPE The maximum scale of value conversion. | 1.3.6.1.4.1.3854.2.5.24.1.33 | INTEGER | read-write | mandatory |
| fuelSensorAmountBaseValue OBJECT-TYPE The base scale of value conversion. | 1.3.6.1.4.1.3854.2.5.24.1.34 | INTEGER | read-write | mandatory |
| fuelSensorDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.5.24.1.37 | INTEGER (0..65534) | read-only | mandatory |
| fuelSensorDisplayStyle OBJECT-TYPE Fuel display style | 1.3.6.1.4.1.3854.2.5.24.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| fuelSensorHighCriticalDesc OBJECT-TYPE A HighCritical Description of this sensor | 1.3.6.1.4.1.3854.2.5.24.1.46 | DisplayString | read-write | mandatory |
| fuelSensorLowCriticalDesc OBJECT-TYPE A LowCritical Description of this sensor | 1.3.6.1.4.1.3854.2.5.24.1.47 | DisplayString | read-write | mandatory |
| fuelSensorNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.5.24.1.48 | DisplayString | read-write | mandatory |
| fuelSensorLowWarningDesc OBJECT-TYPE A LowWarning Description of this sensor | 1.3.6.1.4.1.3854.2.5.24.1.49 | DisplayString | read-write | mandatory |
| fuelSensorHighWarningDesc OBJECT-TYPE A HighWarning Description of this sensor | 1.3.6.1.4.1.3854.2.5.24.1.50 | DisplayString | read-write | mandatory |
| fuelSensorSensorErrorDesc OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.5.24.1.51 | DisplayString | read-write | mandatory |
| fuelSensorHighCriticalColor OBJECT-TYPE A HighCritical Color of this sensor | 1.3.6.1.4.1.3854.2.5.24.1.54 | INTEGER | read-write | mandatory |
| fuelSensorLowCriticalColor OBJECT-TYPE A LowCritical Color of this sensor | 1.3.6.1.4.1.3854.2.5.24.1.55 | INTEGER | read-write | mandatory |
| fuelSensorNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.5.24.1.56 | INTEGER | read-write | mandatory |
| fuelSensorLowWarningColor OBJECT-TYPE A LowWarning Color of this sensor | 1.3.6.1.4.1.3854.2.5.24.1.57 | INTEGER | read-write | mandatory |
| fuelSensorHighWarningColor OBJECT-TYPE A HighWarning Color of this sensor | 1.3.6.1.4.1.3854.2.5.24.1.58 | INTEGER | read-write | mandatory |
| fuelSensorSensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.5.24.1.59 | INTEGER | read-write | mandatory |
| fuelSensorAcknowledge OBJECT-TYPE Fuel sensor acknowledge | 1.3.6.1.4.1.3854.2.5.24.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| fuelSensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.24.1.1000 | INTEGER | read-only | mandatory |
| tankSenderSensorTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.5.26 | not-accessible | mandatory | |
| tankSenderSensorEntry OBJECT-TYPE This is an entry in the tankSenderSensorEntry Table | 1.3.6.1.4.1.3854.2.5.26.1 | not-accessible | mandatory | |
| tankSenderSensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.26.1.1 | DisplayString | read-only | mandatory |
| tankSenderSensorDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.5.26.1.2 | DisplayString | read-write | mandatory |
| tankSenderSensorValue OBJECT-TYPE The reading value in this sensor | 1.3.6.1.4.1.3854.2.5.26.1.4 | INTEGER | read-only | mandatory |
| tankSenderSensorUnit OBJECT-TYPE The unit string | 1.3.6.1.4.1.3854.2.5.26.1.5 | DisplayString | read-write | mandatory |
| tankSenderSensorStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.2.5.26.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| tankSenderSensorGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.5.26.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| tankSenderSensorLowCritical OBJECT-TYPE Level value of this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.5.26.1.9 | INTEGER | read-write | mandatory |
| tankSenderSensorLowWarning OBJECT-TYPE Level value of this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.5.26.1.10 | INTEGER | read-write | mandatory |
| tankSenderSensorHighWarning OBJECT-TYPE Level value of this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.5.26.1.11 | INTEGER | read-write | mandatory |
| tankSenderSensorHighCritical OBJECT-TYPE Level value of this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.5.26.1.12 | INTEGER | read-write | mandatory |
| tankSenderSensorRearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.2.5.26.1.13 | INTEGER | read-write | mandatory |
| tankSenderSensorDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.2.5.26.1.14 | INTEGER (0..65534) | read-write | mandatory |
| tankSenderSensorDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.2.5.26.1.15 | INTEGER (0..65534) | read-write | mandatory |
| tankSenderSensorDelayLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.26.1.16 | INTEGER (0..65535) | read-write | mandatory |
| tankSenderSensorDelayLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.5.26.1.17 | INTEGER (0..65535) | read-write | mandatory |
| tankSenderSensorDelayHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.5.26.1.18 | INTEGER (0..65535) | read-write | mandatory |
| tankSenderSensorDelayHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.26.1.19 | INTEGER (0..65535) | read-write | mandatory |
| tankSenderSensorRaw OBJECT-TYPE The unformatted, raw, A/D value in this sensor. Contains more resolution than the formated percentage. | 1.3.6.1.4.1.3854.2.5.26.1.20 | INTEGER | read-only | mandatory |
| tankSenderSensorDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.5.26.1.37 | INTEGER (0..65534) | read-only | mandatory |
| tankSenderSensorDisplayStyle OBJECT-TYPE TankSender display style | 1.3.6.1.4.1.3854.2.5.26.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| tankSenderSensorHighCriticalDesc OBJECT-TYPE A HighCritical Description of this sensor | 1.3.6.1.4.1.3854.2.5.26.1.46 | DisplayString | read-write | mandatory |
| tankSenderSensorLowCriticalDesc OBJECT-TYPE A LowCritical Description of this sensor | 1.3.6.1.4.1.3854.2.5.26.1.47 | DisplayString | read-write | mandatory |
| tankSenderSensorNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.5.26.1.48 | DisplayString | read-write | mandatory |
| tankSenderSensorLowWarningDesc OBJECT-TYPE A LowWarning Description of this sensor | 1.3.6.1.4.1.3854.2.5.26.1.49 | DisplayString | read-write | mandatory |
| tankSenderSensorHighWarningDesc OBJECT-TYPE A HighWarning Description of this sensor | 1.3.6.1.4.1.3854.2.5.26.1.50 | DisplayString | read-write | mandatory |
| tankSenderSensorSensorErrorDesc OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.5.26.1.51 | DisplayString | read-write | mandatory |
| tankSenderSensorHighCriticalColor OBJECT-TYPE A HighCritical Color of this sensor | 1.3.6.1.4.1.3854.2.5.26.1.54 | INTEGER | read-write | mandatory |
| tankSenderSensorLowCriticalColor OBJECT-TYPE A LowCritical Color of this sensor | 1.3.6.1.4.1.3854.2.5.26.1.55 | INTEGER | read-write | mandatory |
| tankSenderSensorNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.5.26.1.56 | INTEGER | read-write | mandatory |
| tankSenderSensorLowWarningColor OBJECT-TYPE A LowWarning Color of this sensor | 1.3.6.1.4.1.3854.2.5.26.1.57 | INTEGER | read-write | mandatory |
| tankSenderSensorHighWarningColor OBJECT-TYPE A HighWarning Color of this sensor | 1.3.6.1.4.1.3854.2.5.26.1.58 | INTEGER | read-write | mandatory |
| tankSenderSensorSensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.5.26.1.59 | INTEGER | read-write | mandatory |
| tankSenderSensorAcknowledge OBJECT-TYPE Tank Sender sensor acknowledge | 1.3.6.1.4.1.3854.2.5.26.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| tankSenderSensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.26.1.1000 | INTEGER | read-only | mandatory |
| doorSensorTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.2.5.27 | not-accessible | mandatory | |
| doorSensorEntry OBJECT-TYPE This is an entry in the doorSensorEntry Table | 1.3.6.1.4.1.3854.2.5.27.1 | not-accessible | mandatory | |
| doorSensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.27.1.1 | DisplayString | read-only | mandatory |
| doorSensorDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.5.27.1.2 | DisplayString | read-write | mandatory |
| doorSensorValue OBJECT-TYPE The reading value in this sensor | 1.3.6.1.4.1.3854.2.5.27.1.4 | INTEGER | read-only | mandatory |
| doorSensorStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.2.5.27.1.6 | INTEGER {noStatus(1), closed(2), heldOpen(3), fire(4), opened(5), forceOpened(6), sensorError(7)} | read-only | mandatory |
| doorSensorUnlockPeriod OBJECT-TYPE Door unlock period | 1.3.6.1.4.1.3854.2.5.27.1.62 | INTEGER | read-write | mandatory |
| doorSensorOpenPeriod OBJECT-TYPE Door open period | 1.3.6.1.4.1.3854.2.5.27.1.63 | INTEGER | read-write | mandatory |
| doorSensorCmd OBJECT-TYPE Door command | 1.3.6.1.4.1.3854.2.5.27.1.64 | INTEGER | read-write | mandatory |
| doorSensorAcknowledge OBJECT-TYPE Door sensor acknowledge | 1.3.6.1.4.1.3854.2.5.27.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| doorSensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.27.1.1000 | INTEGER | read-only | mandatory |
| temperatureArraySensorTable OBJECT-TYPE This table contains the property and reading value for every Temperature sensor. | 1.3.6.1.4.1.3854.2.5.28 | not-accessible | mandatory | |
| temperatureArraySensorEntry OBJECT-TYPE This is an entry in the temperatureArraySensorEntry Table | 1.3.6.1.4.1.3854.2.5.28.1 | not-accessible | mandatory | |
| temperatureArraySensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.28.1.1 | DisplayString | read-only | mandatory |
| temperatureArraySensorDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.5.28.1.2 | DisplayString | read-write | mandatory |
| temperatureArraySensorType OBJECT-TYPE Enter the type of this Sensor | 1.3.6.1.4.1.3854.2.5.28.1.3 | INTEGER {temperature(1), dualsensor(3), thermocouple(20)} | read-only | mandatory |
| temperatureArraySensorDegree OBJECT-TYPE The degrees in this sensor | 1.3.6.1.4.1.3854.2.5.28.1.4 | INTEGER | read-only | mandatory |
| temperatureArraySensorUnit OBJECT-TYPE The unit string | 1.3.6.1.4.1.3854.2.5.28.1.5 | DisplayString | read-only | mandatory |
| temperatureArraySensorStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.2.5.28.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| temperatureArraySensorGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.2.5.28.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| temperatureArraySensorLowCritical OBJECT-TYPE How cold this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.5.28.1.9 | INTEGER | read-write | mandatory |
| temperatureArraySensorLowWarning OBJECT-TYPE How cold this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.5.28.1.10 | INTEGER | read-write | mandatory |
| temperatureArraySensorHighWarning OBJECT-TYPE How hot this sensor gets before it sends a warning | 1.3.6.1.4.1.3854.2.5.28.1.11 | INTEGER | read-write | mandatory |
| temperatureArraySensorHighCritical OBJECT-TYPE How hot this sensor gets before it sends a critical event | 1.3.6.1.4.1.3854.2.5.28.1.12 | INTEGER | read-write | mandatory |
| temperatureArraySensorRearm OBJECT-TYPE The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to normal | 1.3.6.1.4.1.3854.2.5.28.1.13 | INTEGER | read-write | mandatory |
| temperatureArraySensorDelayError OBJECT-TYPE Time in seconds after the sensor has been in error status before report as an error | 1.3.6.1.4.1.3854.2.5.28.1.14 | INTEGER (0..65534) | read-write | mandatory |
| temperatureArraySensorDelayNormal OBJECT-TYPE Time in seconds after the sensor change from error to normal before report as normal | 1.3.6.1.4.1.3854.2.5.28.1.15 | INTEGER (0..65534) | read-write | mandatory |
| temperatureArraySensorDelayLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.28.1.16 | INTEGER (0..65535) | read-write | mandatory |
| temperatureArraySensorDelayLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.5.28.1.17 | INTEGER (0..65535) | read-write | mandatory |
| temperatureArraySensorDelayHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.5.28.1.18 | INTEGER (0..65535) | read-write | mandatory |
| temperatureArraySensorDelayHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.28.1.19 | INTEGER (0..65535) | read-write | mandatory |
| temperatureArraySensorRaw OBJECT-TYPE The raw degree data from the temperature sensor, slightly higher resolution | 1.3.6.1.4.1.3854.2.5.28.1.20 | INTEGER | read-only | mandatory |
| temperatureArraySensorOffset OBJECT-TYPE Temperature Offset reading | 1.3.6.1.4.1.3854.2.5.28.1.21 | INTEGER | read-write | mandatory |
| temperatureArraySensorPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.2.5.28.1.35 | INTEGER (0..65534) | read-only | mandatory |
| temperatureArraySensorSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.2.5.28.1.36 | INTEGER (0..65534) | read-only | mandatory |
| temperatureArraySensorDeviceIndex OBJECT-TYPE Device Index of sensor | 1.3.6.1.4.1.3854.2.5.28.1.37 | INTEGER (0..65534) | read-only | mandatory |
| temperatureArraySensorDisplayStyle OBJECT-TYPE Temperature display style | 1.3.6.1.4.1.3854.2.5.28.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| temperatureArraySensorHighCriticalDesc OBJECT-TYPE A HighCritical Description of this sensor | 1.3.6.1.4.1.3854.2.5.28.1.46 | DisplayString | read-write | mandatory |
| temperatureArraySensorLowCriticalDesc OBJECT-TYPE A LowCritical Description of this sensor | 1.3.6.1.4.1.3854.2.5.28.1.47 | DisplayString | read-write | mandatory |
| temperatureArraySensorNormalDesc OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.2.5.28.1.48 | DisplayString | read-write | mandatory |
| temperatureArraySensorLowWarningDesc OBJECT-TYPE A LowWarning Description of this sensor | 1.3.6.1.4.1.3854.2.5.28.1.49 | DisplayString | read-write | mandatory |
| temperatureArraySensorHighWarningDesc OBJECT-TYPE A HighWarning Description of this sensor | 1.3.6.1.4.1.3854.2.5.28.1.50 | DisplayString | read-write | mandatory |
| temperatureArraySensorSensorErrorDesc OBJECT-TYPE A SensorError Description of this sensor | 1.3.6.1.4.1.3854.2.5.28.1.51 | DisplayString | read-write | mandatory |
| temperatureArraySensorHighCriticalColor OBJECT-TYPE A HighCritical Color of this sensor | 1.3.6.1.4.1.3854.2.5.28.1.54 | INTEGER | read-write | mandatory |
| temperatureArraySensorLowCriticalColor OBJECT-TYPE A LowCritical Color of this sensor | 1.3.6.1.4.1.3854.2.5.28.1.55 | INTEGER | read-write | mandatory |
| temperatureArraySensorSensorNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.2.5.28.1.56 | INTEGER | read-write | mandatory |
| temperatureArraySensorLowWarningColor OBJECT-TYPE A LowWarning Color of this sensor | 1.3.6.1.4.1.3854.2.5.28.1.57 | INTEGER | read-write | mandatory |
| temperatureArraySensorHighWarningColor OBJECT-TYPE A HighWarning Color of this sensor | 1.3.6.1.4.1.3854.2.5.28.1.58 | INTEGER | read-write | mandatory |
| temperatureArraySensorSensorErrorColor OBJECT-TYPE A SensorError Color of this sensor | 1.3.6.1.4.1.3854.2.5.28.1.59 | INTEGER | read-write | mandatory |
| temperatureArraySensorAcknowledge OBJECT-TYPE Temperature sensor acknowledge | 1.3.6.1.4.1.3854.2.5.28.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| temperatureArraySensorSerialNumber OBJECT-TYPE Serial Number of Temperature Sensor x is Hex Digit xx-xx-xx-xx-xx-xx-xx-xx | 1.3.6.1.4.1.3854.2.5.28.1.71 | DisplayString | read-write | mandatory |
| temperatureArraySensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.28.1.1000 | INTEGER | read-only | mandatory |
| virtualSensor OBJECT-IDENTITY | 1.3.6.1.4.1.3854.2.5.129 | |||
| virtualAnalogSensorTable OBJECT-TYPE This table contains the data for every VirtualAnalog Sensor in the SensorArray. Each row in the table contains data for a different VirtualAnalog Sensor. | 1.3.6.1.4.1.3854.2.5.129.2 | not-accessible | mandatory | |
| virtualAnalogSensorEntry OBJECT-TYPE This is an entry in the virtualAnalogSensorEntry Table | 1.3.6.1.4.1.3854.2.5.129.2.1 | not-accessible | mandatory | |
| virtualAnalogSensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.129.2.1.1 | DisplayString | read-only | mandatory |
| virtualAnalogSensorDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.5.129.2.1.2 | DisplayString | read-write | mandatory |
| virtualAnalogSensorStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.2.5.129.2.1.4 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| virtualAnalogSensorOnline OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.2.5.129.2.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| virtualAnalogSensorGoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.2.5.129.2.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| virtualAnalogSensorHighWarning OBJECT-TYPE How high the relative VirtualAnalog this sensor measures before it sends a warning | 1.3.6.1.4.1.3854.2.5.129.2.1.7 | INTEGER | read-write | mandatory |
| virtualAnalogSensorHighCritical OBJECT-TYPE How high the relative VirtualAnalog this sensor measures before it becomes critical | 1.3.6.1.4.1.3854.2.5.129.2.1.8 | INTEGER | read-write | mandatory |
| virtualAnalogSensorLowWarning OBJECT-TYPE How low the relative VirtualAnalog this sensor measures before it sends a warning | 1.3.6.1.4.1.3854.2.5.129.2.1.9 | INTEGER | read-write | mandatory |
| virtualAnalogSensorLowCritical OBJECT-TYPE How low the relative VirtualAnalog this sensor measures before it becomes critical | 1.3.6.1.4.1.3854.2.5.129.2.1.10 | INTEGER | read-write | mandatory |
| virtualAnalogSensorRearm OBJECT-TYPE The percent relative VirtualAnalog to rearm the status. For example if status goes from normal to warning, the VirtualAnalog must go down spAnalogueRearm below warning before the status goes to normal | 1.3.6.1.4.1.3854.2.5.129.2.1.11 | INTEGER | read-write | mandatory |
| virtualAnalogSensorRaw OBJECT-TYPE The unformatted, raw, A/D value in this sensor. Contains more resolution than the formated percentage. This number can go from 0 to 1023 depending on the input voltage | 1.3.6.1.4.1.3854.2.5.129.2.1.13 | INTEGER | read-only | mandatory |
| virtualAnalogSensorEmailTrapLimit OBJECT-TYPE Enable email/trap limit feature | 1.3.6.1.4.1.3854.2.5.129.2.1.17 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| virtualAnalogSensorUnit OBJECT-TYPE Display unit in VirtualAnalog. | 1.3.6.1.4.1.3854.2.5.129.2.1.27 | DisplayString | read-write | mandatory |
| virtualAnalogSensorAcknowledgement OBJECT-TYPE Acknowledged sensor error and stop notification | 1.3.6.1.4.1.3854.2.5.129.2.1.41 | INTEGER {ack(1)} | read-write | mandatory |
| virtualAnalogSensorURL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.2.5.129.2.1.43 | DisplayString | read-write | mandatory |
| virtualAnalogSensorOpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.2.5.129.2.1.44 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| virtualAnalogSensorContTimeHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.129.2.1.45 | INTEGER (0..65535) | read-write | mandatory |
| virtualAnalogSensorContTimeHighWarning OBJECT-TYPE Continuous time for this sensor to be in High Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.5.129.2.1.46 | INTEGER (0..65535) | read-write | mandatory |
| virtualAnalogSensorContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.2.5.129.2.1.47 | INTEGER (0..65535) | read-write | mandatory |
| virtualAnalogSensorContTimeLowWarning OBJECT-TYPE Continuous time for this sensor to be in Low Warning before accepting new Status. | 1.3.6.1.4.1.3854.2.5.129.2.1.48 | INTEGER (0..65535) | read-write | mandatory |
| virtualAnalogSensorContTimeLowCritical OBJECT-TYPE Continuous time for this sensor to be in Low Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.129.2.1.49 | INTEGER (0..65535) | read-write | mandatory |
| virtualAnalogSensorContTimeSensorError OBJECT-TYPE Continuous time for this sensor to be in Sensor Error before accepting new Status. | 1.3.6.1.4.1.3854.2.5.129.2.1.50 | INTEGER (0..65535) | read-write | mandatory |
| virtualAnalogSensorCalendar OBJECT-TYPE Enable or disable the calendar filtering working hours of sensor. | 1.3.6.1.4.1.3854.2.5.129.2.1.51 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| virtualAnalogSensorValueFactor OBJECT-TYPE To change the ratio of value. | 1.3.6.1.4.1.3854.2.5.129.2.1.52 | INTEGER {x1(1), x0-1(10), x0-01(100), x0-001(1000)} | read-write | mandatory |
| virtualAnalogSensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.129.2.1.1000 | INTEGER | read-only | mandatory |
| virtualSwitchSensorTable OBJECT-TYPE This table contains the data for every VirtualSwitch Sensor in the SensorArray. Each row in the table contains data for a different VirtualSwitch Sensor. | 1.3.6.1.4.1.3854.2.5.129.4 | not-accessible | mandatory | |
| virtualSwitchSensorEntry OBJECT-TYPE This is an entry in the virtualSwitchSensorEntry Table | 1.3.6.1.4.1.3854.2.5.129.4.1 | not-accessible | mandatory | |
| virtualSwitchSensorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.129.4.1.1 | DisplayString | read-only | mandatory |
| virtualSwitchSensorDescription OBJECT-TYPE A Description of this sensor | 1.3.6.1.4.1.3854.2.5.129.4.1.2 | DisplayString | read-write | mandatory |
| virtualSwitchSensorStatus OBJECT-TYPE The current status of this Sensor | 1.3.6.1.4.1.3854.2.5.129.4.1.4 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| virtualSwitchSensorOnline OBJECT-TYPE If this Sensor is currently online | 1.3.6.1.4.1.3854.2.5.129.4.1.5 | INTEGER {online(1), offline(2)} | read-only | mandatory |
| virtualSwitchSensorGoOnline OBJECT-TYPE To put online enter a 1, to take offline enter a 2 | 1.3.6.1.4.1.3854.2.5.129.4.1.6 | INTEGER {goOnline(1), goOffline(2)} | read-write | mandatory |
| virtualSwitchSensorEmailTrapLimit OBJECT-TYPE Enable email/trap limit feature | 1.3.6.1.4.1.3854.2.5.129.4.1.17 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| virtualSwitchSensorContTimeHighCritical OBJECT-TYPE Continuous time for this sensor to be in High Critical before accepting new Status. | 1.3.6.1.4.1.3854.2.5.129.4.1.21 | INTEGER (0..65534) | read-write | mandatory |
| virtualSwitchSensorContTimeNormal OBJECT-TYPE Continuous time for this sensor to be in Normal before accepting new Status. | 1.3.6.1.4.1.3854.2.5.129.4.1.22 | INTEGER (0..65535) | read-write | mandatory |
| virtualSwitchSensorDescriptionCritical OBJECT-TYPE Description of status when the virsual switch is critical | 1.3.6.1.4.1.3854.2.5.129.4.1.26 | DisplayString | read-write | mandatory |
| virtualSwitchSensorDescriptionNormal OBJECT-TYPE Description of status when the virsual switch is normal | 1.3.6.1.4.1.3854.2.5.129.4.1.27 | DisplayString | read-write | mandatory |
| virtualSwitchSensorAcknowledgement OBJECT-TYPE Acknowledged sensor error and stop notification | 1.3.6.1.4.1.3854.2.5.129.4.1.41 | INTEGER {ack(1)} | read-write | mandatory |
| virtualSwitchSensorURL OBJECT-TYPE Sensor URL link. | 1.3.6.1.4.1.3854.2.5.129.4.1.43 | DisplayString | read-write | mandatory |
| virtualSwitchSensorOpenURL OBJECT-TYPE Open URL in this browser or open in a new window. | 1.3.6.1.4.1.3854.2.5.129.4.1.44 | INTEGER {cur-window(0), new-window(2)} | read-write | mandatory |
| virtualSwitchSensorCalendar OBJECT-TYPE Enable or disable the calendar filtering working hours of sensor. | 1.3.6.1.4.1.3854.2.5.129.4.1.45 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| virtualSwitchSensorNormalState OBJECT-TYPE The normal state of a return of the virsual switch. If a return of the virsual switch is equal this normal state value, it is normal. Otherwise, it is critical. | 1.3.6.1.4.1.3854.2.5.129.4.1.46 | INTEGER | read-write | mandatory |
| virtualSwitchSensorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.2.5.129.4.1.1000 | INTEGER | read-only | mandatory |
| plusSeries OBJECT-IDENTITY | 1.3.6.1.4.1.3854.3 | |||
| summary OBJECT-IDENTITY | 1.3.6.1.4.1.3854.3.1 | |||
| device OBJECT-IDENTITY | 1.3.6.1.4.1.3854.3.2 | |||
| config OBJECT-IDENTITY | 1.3.6.1.4.1.3854.3.2.1 | |||
| cfgServerAddress OBJECT-TYPE The DCIM's IP Address that device is connected to. | 1.3.6.1.4.1.3854.3.2.1.1 | IpAddress | read-write | mandatory |
| cfgServerPort OBJECT-TYPE The DCIM's Port that device is connected to. Default is 5000. | 1.3.6.1.4.1.3854.3.2.1.2 | INTEGER (0..65535) | read-write | mandatory |
| cfgDevicePassword OBJECT-TYPE The local Administrator account's password for accessing the Web UI, Telnet and SSH services of the device. Default is 'public'. | 1.3.6.1.4.1.3854.3.2.1.3 | DisplayString | write-only | mandatory |
| cfgSystemDescription OBJECT-TYPE The system's description of the device. | 1.3.6.1.4.1.3854.3.2.1.8 | DisplayString | read-write | mandatory |
| cfgSystemName OBJECT-TYPE The system name for the device. | 1.3.6.1.4.1.3854.3.2.1.9 | DisplayString | read-write | mandatory |
| cfgSystemLocation OBJECT-TYPE The system location for the device. | 1.3.6.1.4.1.3854.3.2.1.10 | DisplayString | read-write | mandatory |
| cfgSystemContact OBJECT-TYPE The administrator contact for the system. | 1.3.6.1.4.1.3854.3.2.1.11 | DisplayString | read-write | mandatory |
| cfgIPAddress OBJECT-TYPE The device's Ethernet IP Address. | 1.3.6.1.4.1.3854.3.2.1.14 | IpAddress | read-write | mandatory |
| cfgSubnetMask OBJECT-TYPE The device's Ethernet Subnet Mask. | 1.3.6.1.4.1.3854.3.2.1.15 | IpAddress | read-write | mandatory |
| cfgDefaultGateway OBJECT-TYPE The device's Ethernet Default Gateway. | 1.3.6.1.4.1.3854.3.2.1.16 | IpAddress | read-write | mandatory |
| cfgDefaultDNS OBJECT-TYPE The device's Ethernet Default Domain Name System (DNS) for name resolution. | 1.3.6.1.4.1.3854.3.2.1.17 | IpAddress | read-write | mandatory |
| cfgDeviceUseDHCP OBJECT-TYPE Enable Ethernet Dynamic Host Configuration Protocol (DHCP) on the device; it will automatically provide IP Address for the device. | 1.3.6.1.4.1.3854.3.2.1.18 | INTEGER {no(0), yes(1)} | read-write | mandatory |
| cfgNTPMode OBJECT-TYPE Network Time Protocol (NTP) Mode; this will define how often the device synchronizes time with the NTP Server. | 1.3.6.1.4.1.3854.3.2.1.20 | INTEGER {do-not-use(0), one-time(1), on-system-start-up(2), once-a-month(3), once-a-week(4), once-a-day(5), once-a-hour(6), continuously(7)} | read-write | mandatory |
| cfgNTPServer1 OBJECT-TYPE The first server that the device will synchronize time with, when NTP is enabled. | 1.3.6.1.4.1.3854.3.2.1.21 | DisplayString | read-write | mandatory |
| cfgNTPServer2 OBJECT-TYPE The second server that the device will synchronize time with, when NTP is enabled. | 1.3.6.1.4.1.3854.3.2.1.22 | DisplayString | read-write | mandatory |
| cfgTimeZone OBJECT-TYPE The Time Zone of the device. | 1.3.6.1.4.1.3854.3.2.1.23 | INTEGER (0..255) | read-write | mandatory |
| cfgGSMConnectionMethod OBJECT-TYPE The GSM Modem's Connection method. It will be defined when the device will be connecting via GSM's Modem. | 1.3.6.1.4.1.3854.3.2.1.24 | INTEGER {never-dial(0), dial-if-eth-failed(1), dial-only(2)} | read-write | mandatory |
| cfgGSMConnectionType OBJECT-TYPE The GSM Modem's Connection type. It will be defined when the GSM Modem is always being used to connect, or depends on the Connection Method Setting. | 1.3.6.1.4.1.3854.3.2.1.25 | INTEGER (0..255) | read-write | mandatory |
| cfgGSMInitString OBJECT-TYPE The GSM Modem's Initialization String, a list of AT commands that will be sent when a connection to the modem is being established. | 1.3.6.1.4.1.3854.3.2.1.26 | DisplayString | read-write | mandatory |
| cfgGSMConnectionMode OBJECT-TYPE The GSM Modem's Connection Mode, it defines which GSM protocol will be used to transfer data. | 1.3.6.1.4.1.3854.3.2.1.27 | INTEGER (0..255) | read-write | mandatory |
| cfgGSMAPN OBJECT-TYPE Access Point Name (APN), the name of a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network, frequently the public Internet. | 1.3.6.1.4.1.3854.3.2.1.28 | DisplayString | read-write | mandatory |
| cfgGSMRetry OBJECT-TYPE The number of attempts that the GSM modem will use to redial if previous attempts have failed. | 1.3.6.1.4.1.3854.3.2.1.29 | INTEGER (0..255) | read-write | mandatory |
| cfgGSMIdleTimeout OBJECT-TYPE Time in seconds for the GSM modem to be idle before hanging up automatically. | 1.3.6.1.4.1.3854.3.2.1.30 | INTEGER (0..65535) | read-write | mandatory |
| cfgGSMLogin OBJECT-TYPE GSM modem Point-to-Point Protocol (PPP)'s Login Name. | 1.3.6.1.4.1.3854.3.2.1.31 | DisplayString | read-write | mandatory |
| cfgGSMPassword OBJECT-TYPE GSM Modem Point-to-Point Protocol (PPP)'s Password. | 1.3.6.1.4.1.3854.3.2.1.32 | DisplayString | write-only | mandatory |
| cfgGSMDNS OBJECT-TYPE IP address for the Domain Name System (DNS) for GSM Modem Connection. | 1.3.6.1.4.1.3854.3.2.1.33 | IpAddress | read-write | mandatory |
| cfgWEBPasswordEnable OBJECT-TYPE Enable/disable password checking for the Web UI. | 1.3.6.1.4.1.3854.3.2.1.34 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| cfgWEBPort OBJECT-TYPE Web interface port (default value is 80). | 1.3.6.1.4.1.3854.3.2.1.35 | INTEGER (0..65535) | read-write | mandatory |
| cfgWEBSecurePort OBJECT-TYPE Secured Web interface port (default value is 443). | 1.3.6.1.4.1.3854.3.2.1.36 | INTEGER (0..65535) | read-write | mandatory |
| cfgWEBSecureEnabled OBJECT-TYPE Enable/disable Secured Web interface. | 1.3.6.1.4.1.3854.3.2.1.37 | INTEGER {disable(0), enable(1), useByDefault(2)} | read-write | mandatory |
| cfgWEBEnabled OBJECT-TYPE Enable/disable Web interface. | 1.3.6.1.4.1.3854.3.2.1.41 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| cfgSNMPReadCommunity OBJECT-TYPE SNMP read community, the community password for use with SNMP to read variables. Default is 'public'. | 1.3.6.1.4.1.3854.3.2.1.42 | DisplayString | write-only | mandatory |
| cfgSNMPWriteCommunity OBJECT-TYPE SNMP write community, the community password for use with SNMP to write variables. Default is 'public'. | 1.3.6.1.4.1.3854.3.2.1.43 | DisplayString | write-only | mandatory |
| cfgSNMPv3Mode OBJECT-TYPE Security Level for SNMPv3 to be used during communication. | 1.3.6.1.4.1.3854.3.2.1.45 | INTEGER {authNoPriv(0), authPriv(1), noAuthNoPriv(2)} | read-write | mandatory |
| cfgEMailEnable OBJECT-TYPE Enable/disable the usage of the E-Mail feature on the device. | 1.3.6.1.4.1.3854.3.2.1.47 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| cfgSMTPServer OBJECT-TYPE The name or IP address of the SMTP server, to be used for sending an E-Mail. | 1.3.6.1.4.1.3854.3.2.1.48 | DisplayString | read-write | mandatory |
| cfgSMTPPort OBJECT-TYPE The port number for the SMTP connection. Default is 25. | 1.3.6.1.4.1.3854.3.2.1.49 | INTEGER (0..65535) | read-write | mandatory |
| cfgSMTPAuth OBJECT-TYPE Enable/disable the SMTP authentication for the E-Mail service on the device. | 1.3.6.1.4.1.3854.3.2.1.50 | INTEGER {not-required(0), required(1)} | read-write | mandatory |
| cfgSMTPLogin OBJECT-TYPE The user name for the SMTP server login. | 1.3.6.1.4.1.3854.3.2.1.51 | DisplayString | read-write | mandatory |
| cfgSMTPPassword OBJECT-TYPE The user's password for the SMTP server login. | 1.3.6.1.4.1.3854.3.2.1.52 | DisplayString | write-only | mandatory |
| cfgEMailResendInterval OBJECT-TYPE | 1.3.6.1.4.1.3854.3.2.1.55 | INTEGER | read-write | mandatory |
| cfgEMailMaxResend OBJECT-TYPE | 1.3.6.1.4.1.3854.3.2.1.56 | INTEGER | read-write | mandatory |
| cfgKeepAliveTime OBJECT-TYPE The DCIM's keep-alive time in seconds. | 1.3.6.1.4.1.3854.3.2.1.78 | INTEGER | read-write | mandatory |
| cfgHostID OBJECT-TYPE Server host ID | 1.3.6.1.4.1.3854.3.2.1.79 | INTEGER | read-only | mandatory |
| cfgHostUID OBJECT-TYPE Server host update ID | 1.3.6.1.4.1.3854.3.2.1.80 | INTEGER | read-only | mandatory |
| cfgHostSensorUID OBJECT-TYPE Server host update ID for updating sensor and board properties | 1.3.6.1.4.1.3854.3.2.1.81 | INTEGER | read-only | mandatory |
| cfgVPNServerPort OBJECT-TYPE The VPN connection's port number on the DCIM. Default is 1194. | 1.3.6.1.4.1.3854.3.2.1.83 | INTEGER (0..65535) | read-write | mandatory |
| cfgVPNServerDNSName OBJECT-TYPE The Domain Name System (DNS) name of the DCIM for the VPN connection. | 1.3.6.1.4.1.3854.3.2.1.84 | DisplayString | read-write | mandatory |
| cfgRSysLogServerAddress OBJECT-TYPE IP address for the Remote SysLog server. | 1.3.6.1.4.1.3854.3.2.1.85 | IpAddress | read-write | mandatory |
| cfgRSysLogServerPort OBJECT-TYPE The port number for the Remote SysLog server. | 1.3.6.1.4.1.3854.3.2.1.86 | INTEGER (0..65535) | read-write | mandatory |
| cfgSMTPSSL OBJECT-TYPE The SMTP security level's protocol that will be used upon connection to an SMTP Server. | 1.3.6.1.4.1.3854.3.2.1.87 | INTEGER {no-encryption(0), ssl-tls(1), starttls(2)} | read-write | mandatory |
| cfgVPNCipherType OBJECT-TYPE The VPN cipher protocol that will be used to communicate with the DCIM over the network. | 1.3.6.1.4.1.3854.3.2.1.90 | INTEGER {none(0), blowfish(1), aes128(2), des-ede3(3)} | read-write | mandatory |
| cfgVPNPassword OBJECT-TYPE The VPN Password for connecting to the DCIM's VPN server. | 1.3.6.1.4.1.3854.3.2.1.91 | DisplayString | write-only | mandatory |
| cfgVPNEnabled OBJECT-TYPE Enable/disable the VPN feature on the device. If enabled, the device will try to connect to the DCIM VPN server if the configuration is correct. | 1.3.6.1.4.1.3854.3.2.1.92 | INTEGER {no(0), yes(1)} | read-write | mandatory |
| cfgSNMPPort OBJECT-TYPE The port used for SNMP communication. | 1.3.6.1.4.1.3854.3.2.1.93 | INTEGER (0..65535) | read-write | mandatory |
| cfgSNMPv3EngineId OBJECT-TYPE The Engine ID that will be used for connection with SNMPv3. | 1.3.6.1.4.1.3854.3.2.1.94 | DisplayString | read-write | mandatory |
| cfgSNMPv3UserName OBJECT-TYPE The user name for connecting with SNMPv3 to this device. | 1.3.6.1.4.1.3854.3.2.1.95 | DisplayString | read-write | mandatory |
| cfgSNMPv3AuthProtocol OBJECT-TYPE The Authentication protocol that will be used with SNMPv3 connection (MD5 / SHA). | 1.3.6.1.4.1.3854.3.2.1.96 | INTEGER {md5(0), sha1(1)} | read-write | mandatory |
| cfgSNMPv3AuthPassword OBJECT-TYPE The SNMPv3 authentication password. | 1.3.6.1.4.1.3854.3.2.1.97 | Opaque | write-only | mandatory |
| cfgSNMPv3PrivProtocol OBJECT-TYPE The SNMPv3 privacy protocol that will be used with SNMPv3 connection (DES / AES). | 1.3.6.1.4.1.3854.3.2.1.98 | INTEGER {des(0), aes(1)} | read-write | mandatory |
| cfgSNMPv3PrivPassword OBJECT-TYPE The SNMPv3 privacy password. | 1.3.6.1.4.1.3854.3.2.1.99 | Opaque | write-only | mandatory |
| cfgSNMPv3AccessPrivelege OBJECT-TYPE The access privilege of SNMPv3 (read only / read-write). | 1.3.6.1.4.1.3854.3.2.1.100 | INTEGER {read-only(0), read-write(1)} | read-write | mandatory |
| cfgSNMPv1Disable OBJECT-TYPE Disable SNMPv1 and SNMPv2c from being used. | 1.3.6.1.4.1.3854.3.2.1.101 | INTEGER {enable(0), disable(1)} | read-write | mandatory |
| cfgSNMPv3Disable OBJECT-TYPE Disable SNMPv3 from being used. | 1.3.6.1.4.1.3854.3.2.1.102 | INTEGER {enable(0), disable(1)} | read-write | mandatory |
| cfgGraphDataCollectionPeriod OBJECT-TYPE The graph data collection period in seconds. The more seconds you define, the more graph data can be stored. | 1.3.6.1.4.1.3854.3.2.1.104 | INTEGER (0..65535) | read-write | mandatory |
| cfgServiceTelnet OBJECT-TYPE Enable/disable the Telnet service on the device. | 1.3.6.1.4.1.3854.3.2.1.105 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| cfgEnableNotiFilteringOnBoot OBJECT-TYPE Enable/disable notifications filtering when the device is booting up. If enabled (set to nonzero) will trigger notification on device boot (initial sensor state change events). If disabled (set to zero) will filter notifications on software boot on initial sensor status change events. This is useful to avoid false notifications on initial sensor status change events. | 1.3.6.1.4.1.3854.3.2.1.106 | INTEGER {disable(0), enable(1)} | read-write | mandatory |
| cfgSystemURL OBJECT-TYPE Custom URL what users can use in Email and SMS notifications to expand macro $[SYSURL]. It can point to a page on the device, or to any external URL. | 1.3.6.1.4.1.3854.3.2.1.107 | DisplayString | read-write | mandatory |
| cfgServerIntegrationEnabled OBJECT-TYPE Enable/disable the DCIM Integration. | 1.3.6.1.4.1.3854.3.2.1.108 | INTEGER {disabled(0), enabled(1)} | read-write | mandatory |
| cfgServerIntegrationPort OBJECT-TYPE Port for DCIM Integration. | 1.3.6.1.4.1.3854.3.2.1.109 | INTEGER (0..65535) | read-write | mandatory |
| cfgSMTPEMailFrom OBJECT-TYPE The default E-mail address that will show in an E-mail's 'From' field and which will be used to send mail to support. | 1.3.6.1.4.1.3854.3.2.1.110 | DisplayString | read-write | mandatory |
| cfgSupportEMail OBJECT-TYPE The E-mail address of the device's support department. | 1.3.6.1.4.1.3854.3.2.1.111 | DisplayString | read-write | mandatory |
| cfgDHCPHostName OBJECT-TYPE DHCP hostname. | 1.3.6.1.4.1.3854.3.2.1.137 | DisplayString | read-write | mandatory |
| licenses OBJECT-IDENTITY | 1.3.6.1.4.1.3854.3.2.2 | |||
| licenseTable OBJECT-TYPE | 1.3.6.1.4.1.3854.3.2.2.1 | not-accessible | mandatory | |
| licenseEntry OBJECT-TYPE | 1.3.6.1.4.1.3854.3.2.2.1.1 | not-accessible | mandatory | |
| licenseIndex OBJECT-TYPE | 1.3.6.1.4.1.3854.3.2.2.1.1.1 | INTEGER (0..65535) | read-only | mandatory |
| license5DC OBJECT-TYPE | 1.3.6.1.4.1.3854.3.2.2.1.1.2 | INTEGER | read-only | mandatory |
| licenseSNMPv3 OBJECT-TYPE | 1.3.6.1.4.1.3854.3.2.2.1.1.4 | INTEGER {disallowed(0), allowed(1)} | read-only | mandatory |
| licenseVPN OBJECT-TYPE | 1.3.6.1.4.1.3854.3.2.2.1.1.6 | INTEGER {disallowed(0), allowed(1)} | read-only | mandatory |
| licenseVSens OBJECT-TYPE | 1.3.6.1.4.1.3854.3.2.2.1.1.8 | INTEGER | read-only | mandatory |
| licenseAccessUsers OBJECT-TYPE | 1.3.6.1.4.1.3854.3.2.2.1.1.10 | INTEGER | read-only | mandatory |
| license3rdPartyPMS OBJECT-TYPE | 1.3.6.1.4.1.3854.3.2.2.1.1.12 | INTEGER {disallowed(0), allowed(1)} | read-only | mandatory |
| lic5DCTotal OBJECT-TYPE | 1.3.6.1.4.1.3854.3.2.2.2 | INTEGER | read-only | mandatory |
| lic5DCUsed OBJECT-TYPE | 1.3.6.1.4.1.3854.3.2.2.3 | INTEGER | read-only | mandatory |
| licSNMPv3 OBJECT-TYPE | 1.3.6.1.4.1.3854.3.2.2.4 | INTEGER {forbidden(0), allowed(1)} | read-only | mandatory |
| licVPN OBJECT-TYPE | 1.3.6.1.4.1.3854.3.2.2.6 | INTEGER {forbidden(0), allowed(1)} | read-only | mandatory |
| licVSensTotal OBJECT-TYPE | 1.3.6.1.4.1.3854.3.2.2.8 | INTEGER | read-only | mandatory |
| licVSensUsed OBJECT-TYPE | 1.3.6.1.4.1.3854.3.2.2.9 | INTEGER | read-only | mandatory |
| licAccessUsersTotal OBJECT-TYPE | 1.3.6.1.4.1.3854.3.2.2.10 | INTEGER | read-only | mandatory |
| licAccessUsersUsed OBJECT-TYPE | 1.3.6.1.4.1.3854.3.2.2.11 | INTEGER | read-only | mandatory |
| lic3rdPartyPMS OBJECT-TYPE | 1.3.6.1.4.1.3854.3.2.2.12 | INTEGER {forbidden(0), allowed(1)} | read-only | mandatory |
| licAddKey OBJECT-TYPE | 1.3.6.1.4.1.3854.3.2.2.1000 | DisplayString | write-only | mandatory |
| notifications OBJECT-IDENTITY | 1.3.6.1.4.1.3854.3.4 | |||
| sensors OBJECT-IDENTITY | 1.3.6.1.4.1.3854.3.5 | |||
| commonTable OBJECT-TYPE This table contains the properties for each any sensor | 1.3.6.1.4.1.3854.3.5.1 | not-accessible | mandatory | |
| commonEntry OBJECT-TYPE | 1.3.6.1.4.1.3854.3.5.1.1 | not-accessible | mandatory | |
| commonIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.1.1.1 | DisplayString | read-only | mandatory |
| commonDescription OBJECT-TYPE The user specified description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.1.1.2 | DisplayString | read-write | mandatory |
| commonType OBJECT-TYPE The type of the sensor; it represents the sensor's functionality. | 1.3.6.1.4.1.3854.3.5.1.1.3 | INTEGER {temperature(1), humidity(2), temperature-dual(3), four-20mA(4), dcvoltage(5), airflow(6), io(7), drycontact(8), motion(9), water(10), security(11), siren(12), relay(13), acvoltage(14), vrms(15), irms(16), watt(17), watthour(18), xrelay(19), thermocouple(20), smoke(21), drycontact-array(22), temperature-array(23), waterrope(24), five-drycontacts(31), thermostat(128), virtual(129), sound(130), softmotion(131), camera-dummy(132), board-state(133), nosignal(224), test(255)} | read-only | mandatory |
| commonValue OBJECT-TYPE The value reading for this sensor; it's a different measure for each sensor type. | 1.3.6.1.4.1.3854.3.5.1.1.4 | INTEGER | read-only | mandatory |
| commonUnit OBJECT-TYPE The sensor's value unit; it defines the sensor value's reading unit. | 1.3.6.1.4.1.3854.3.5.1.1.5 | DisplayString | read-only | mandatory |
| commonStatus OBJECT-TYPE The current status of this sensor. | 1.3.6.1.4.1.3854.3.5.1.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| commonGoOffline OBJECT-TYPE Command to offline this sensor: use value '2' to set the sensor offline. | 1.3.6.1.4.1.3854.3.5.1.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| commonRaw OBJECT-TYPE The sensor's unformatted (raw) value that is being read directly from sensor, before it is converted to the preferred value. | 1.3.6.1.4.1.3854.3.5.1.1.20 | INTEGER | read-only | mandatory |
| commonPort OBJECT-TYPE The device's sensor port number, where this sensor is plugged in to. | 1.3.6.1.4.1.3854.3.5.1.1.35 | INTEGER | read-only | mandatory |
| commonSubPort OBJECT-TYPE The logical port number of this sensor in the array, or in a set of sensors. | 1.3.6.1.4.1.3854.3.5.1.1.36 | INTEGER | read-only | mandatory |
| commonDisplayStyle OBJECT-TYPE The sensor's Display Style for the Web UI, to display the reading as a gauge or bar. 0 = bar style, 1 = gauge style. | 1.3.6.1.4.1.3854.3.5.1.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| commonHighCriticalDescription OBJECT-TYPE The user specified 'High Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.1.1.46 | DisplayString | read-write | mandatory |
| commonLowCriticalDescription OBJECT-TYPE The user specified 'Low Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.1.1.47 | DisplayString | read-write | mandatory |
| commonSensorNormalDescription OBJECT-TYPE The user specified 'Normal' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.1.1.48 | DisplayString | read-write | mandatory |
| commonLowWarningDescription OBJECT-TYPE The user specified 'Low Warning' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.1.1.49 | DisplayString | read-write | mandatory |
| commonHighWarningDescription OBJECT-TYPE The user specified 'High Warning' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.1.1.50 | DisplayString | read-write | mandatory |
| commonSensorErrorDescription OBJECT-TYPE The user specified 'Sensor Error' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.1.1.51 | DisplayString | read-write | mandatory |
| commonOnDescription OBJECT-TYPE The user specified 'On' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.1.1.52 | DisplayString | read-write | mandatory |
| commonOffDescription OBJECT-TYPE The user specified 'Off' Description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.1.1.53 | DisplayString | read-write | mandatory |
| commonHighCriticalColor OBJECT-TYPE The user specified 'High Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.1.1.54 | INTEGER | read-write | mandatory |
| commonLowCriticalColor OBJECT-TYPE The user specified 'Low Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.1.1.55 | INTEGER | read-write | mandatory |
| commonSensorNormalColor OBJECT-TYPE The user specified 'Normal' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.1.1.56 | INTEGER | read-write | mandatory |
| commonLowWarningColor OBJECT-TYPE The user specified 'Low Warning' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.1.1.57 | INTEGER | read-write | mandatory |
| commonHighWarningColor OBJECT-TYPE The user specified 'High Warning' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.1.1.58 | INTEGER | read-write | mandatory |
| commonSensorErrorColor OBJECT-TYPE The user specified 'Sensor Error' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.1.1.59 | INTEGER | read-write | mandatory |
| commonOnColor OBJECT-TYPE The user specified 'On' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.1.1.60 | INTEGER | read-write | mandatory |
| commonOffColor OBJECT-TYPE The user specified 'Off' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.1.1.61 | INTEGER | read-write | mandatory |
| commonAcknowledge OBJECT-TYPE The acknowledge status for the current status of the sensor: 0 = the status has been changed and waiting to be acknowledged, 1 = status is normal or have been already acknowledged, 2 = acknowledge the current status (this status is write-only) | 1.3.6.1.4.1.3854.3.5.1.1.70 | INTEGER {not-acked(0), acked(1), ack(2)} | read-write | mandatory |
| commonValueFormatFloat OBJECT-TYPE The floating-point IEEE 754 Standard reading value for this sensor (in commonValue float form instead of integer). | 1.3.6.1.4.1.3854.3.5.1.1.99 | Opaque (SIZE(4)) | read-only | mandatory |
| commonId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.1.1.1000 | INTEGER | read-only | mandatory |
| temperatureTable OBJECT-TYPE This table contains the properties for each temperature sensor | 1.3.6.1.4.1.3854.3.5.2 | not-accessible | mandatory | |
| temperatureEntry OBJECT-TYPE | 1.3.6.1.4.1.3854.3.5.2.1 | not-accessible | mandatory | |
| temperatureIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.2.1.1 | DisplayString | read-only | mandatory |
| temperatureDescription OBJECT-TYPE The user specified description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.2.1.2 | DisplayString | read-write | mandatory |
| temperatureType OBJECT-TYPE The type of the sensor; it represents the sensor's functionality. For the temperature sensor, it has 3 sub-types: Normal temperature sensor, Dual sensor, and Thermocouple sensor. | 1.3.6.1.4.1.3854.3.5.2.1.3 | INTEGER {temperature(1), temperature-dual(3), thermocouple(20), temperature-array(23)} | read-only | mandatory |
| temperatureDegree OBJECT-TYPE The temperature degree value in numerical reading. | 1.3.6.1.4.1.3854.3.5.2.1.4 | INTEGER | read-only | mandatory |
| temperatureUnit OBJECT-TYPE The sensor's value unit string, in what the sensor's value is read in. For the temperature sensor it can be Celsius or Fahrenheit. | 1.3.6.1.4.1.3854.3.5.2.1.5 | DisplayString | read-write | mandatory |
| temperatureStatus OBJECT-TYPE The current status of this sensor. | 1.3.6.1.4.1.3854.3.5.2.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| temperatureGoOffline OBJECT-TYPE Command to offline this sensor: use value '2' to set the sensor offline. | 1.3.6.1.4.1.3854.3.5.2.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| temperatureLowCritical OBJECT-TYPE The user specified 'Low Critical' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.2.1.9 | INTEGER | read-write | mandatory |
| temperatureLowWarning OBJECT-TYPE The user specified 'Low Warning' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.2.1.10 | INTEGER | read-write | mandatory |
| temperatureHighWarning OBJECT-TYPE The user specified 'High Warning' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.2.1.11 | INTEGER | read-write | mandatory |
| temperatureHighCritical OBJECT-TYPE The user specified 'High Critical' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.2.1.12 | INTEGER | read-write | mandatory |
| temperatureRearm OBJECT-TYPE This value tells how many degrees the sensor has to reach beyond the threshold value, before changing to a new status. Useful to prevent the quick fluctuation of readings. | 1.3.6.1.4.1.3854.3.5.2.1.13 | INTEGER | read-write | mandatory |
| temperatureDelayError OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Error' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.2.1.14 | INTEGER | read-write | mandatory |
| temperatureDelayNormal OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Normal' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.2.1.15 | INTEGER | read-write | mandatory |
| temperatureDelayLowCritical OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Low Critical' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.2.1.16 | INTEGER | read-write | mandatory |
| temperatureDelayLowWarning OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Low Warning' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.2.1.17 | INTEGER | read-write | mandatory |
| temperatureDelayHighWarning OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'High Warning' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.2.1.18 | INTEGER | read-write | mandatory |
| temperatureDelayHighCritical OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'High Critical' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.2.1.19 | INTEGER | read-write | mandatory |
| temperatureRaw OBJECT-TYPE The sensor's unformatted (raw) value that is being read directly from sensor, before it is converted to the preferred value. | 1.3.6.1.4.1.3854.3.5.2.1.20 | INTEGER | read-only | mandatory |
| temperatureOffset OBJECT-TYPE The offset value for this sensor. It's used to adjust the reading value in case the reading is incorrect. | 1.3.6.1.4.1.3854.3.5.2.1.21 | INTEGER | read-write | mandatory |
| temperaturePort OBJECT-TYPE The device's sensor port number, where this sensor is plugged in to. | 1.3.6.1.4.1.3854.3.5.2.1.35 | INTEGER | read-only | mandatory |
| temperatureSubPort OBJECT-TYPE The logical port number of this sensor in the array, or in a set of sensors. For Temperature Sensor, it's for the array of Temperature Sensors and Dual Sensors. For example x.1, x.2, x.3 ... | 1.3.6.1.4.1.3854.3.5.2.1.36 | INTEGER | read-only | mandatory |
| temperatureDisplayStyle OBJECT-TYPE The sensor's Display Style for the Web UI, to display the reading as a gauge or bar. 0 = bar style, 1 = gauge style. | 1.3.6.1.4.1.3854.3.5.2.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| temperatureHighCriticalDescription OBJECT-TYPE The user specified 'High Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.2.1.46 | DisplayString | read-write | mandatory |
| temperatureLowCriticalDescription OBJECT-TYPE The user specified 'Low Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.2.1.47 | DisplayString | read-write | mandatory |
| temperatureSensorNormalDescription OBJECT-TYPE The user specified 'Normal' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.2.1.48 | DisplayString | read-write | mandatory |
| temperatureLowWarningDescription OBJECT-TYPE The user specified 'Low Warning' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.2.1.49 | DisplayString | read-write | mandatory |
| temperatureHighWarningDescription OBJECT-TYPE The user specified 'High Warning' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.2.1.50 | DisplayString | read-write | mandatory |
| temperatureSensorErrorDescription OBJECT-TYPE The user specified 'Sensor Error' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.2.1.51 | DisplayString | read-write | mandatory |
| temperatureHighCriticalColor OBJECT-TYPE The user specified 'High Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.2.1.54 | INTEGER | read-write | mandatory |
| temperatureLowCriticalColor OBJECT-TYPE The user specified 'Low Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.2.1.55 | INTEGER | read-write | mandatory |
| temperatureSensorNormalColor OBJECT-TYPE The user specified 'Normal' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.2.1.56 | INTEGER | read-write | mandatory |
| temperatureLowWarningColor OBJECT-TYPE The user specified 'Low Warning' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.2.1.57 | INTEGER | read-write | mandatory |
| temperatureHighWarningColor OBJECT-TYPE The user specified 'High Warning' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.2.1.58 | INTEGER | read-write | mandatory |
| temperatureSensorErrorColor OBJECT-TYPE The user specified 'Sensor Error' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.2.1.59 | INTEGER | read-write | mandatory |
| temperatureAcknowledge OBJECT-TYPE The acknowledge status for the current status of the sensor: 0 = the status has been changed and waiting to be acknowledged, 1 = status is normal or have been already acknowledged, 2 = acknowledge the current status (this status is write-only) | 1.3.6.1.4.1.3854.3.5.2.1.70 | INTEGER {not-acked(0), acked(1), ack(2)} | read-write | mandatory |
| temperatureSerialNumber OBJECT-TYPE The serial number of temperature sensor, used to indicate which sensor it is in an array. It matches the MAC ID of the sensor for a DCT sensor array. | 1.3.6.1.4.1.3854.3.5.2.1.71 | DisplayString | read-write | mandatory |
| temperatureId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.2.1.1000 | INTEGER | read-only | mandatory |
| humidityTable OBJECT-TYPE This table contains the properties for each humidity sensor | 1.3.6.1.4.1.3854.3.5.3 | not-accessible | mandatory | |
| humidityEntry OBJECT-TYPE | 1.3.6.1.4.1.3854.3.5.3.1 | not-accessible | mandatory | |
| humidityIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.3.1.1 | DisplayString | read-only | mandatory |
| humidityDescription OBJECT-TYPE The user specified description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.3.1.2 | DisplayString | read-write | mandatory |
| humidityPercent OBJECT-TYPE The relative humidity percentage measured by this sensor | 1.3.6.1.4.1.3854.3.5.3.1.4 | INTEGER | read-only | mandatory |
| humidityUnit OBJECT-TYPE The sensor's value unit string, in what the sensor's value is read in. | 1.3.6.1.4.1.3854.3.5.3.1.5 | DisplayString | read-only | mandatory |
| humidityStatus OBJECT-TYPE The current status of this sensor. | 1.3.6.1.4.1.3854.3.5.3.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| humidityGoOffline OBJECT-TYPE Command to offline this sensor: use value '2' to set the sensor offline. | 1.3.6.1.4.1.3854.3.5.3.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| humidityLowCritical OBJECT-TYPE The user specified 'Low Critical' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.3.1.9 | INTEGER | read-write | mandatory |
| humidityLowWarning OBJECT-TYPE The user specified 'Low Warning' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.3.1.10 | INTEGER | read-write | mandatory |
| humidityHighWarning OBJECT-TYPE The user specified 'High Warning' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.3.1.11 | INTEGER | read-write | mandatory |
| humidityHighCritical OBJECT-TYPE The user specified 'High Critical' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.3.1.12 | INTEGER | read-write | mandatory |
| humidityRearm OBJECT-TYPE This value tells how many percentage the sensor has to reach beyond the threshold value, before changing to a new status. Useful to prevent the quick fluctuation of readings. | 1.3.6.1.4.1.3854.3.5.3.1.13 | INTEGER | read-write | mandatory |
| humidityDelayError OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Error' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.3.1.14 | INTEGER | read-write | mandatory |
| humidityDelayNormal OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Normal' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.3.1.15 | INTEGER | read-write | mandatory |
| humidityDelayLowCritical OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Low Critical' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.3.1.16 | INTEGER | read-write | mandatory |
| humidityDelayLowWarning OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Low Warning' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.3.1.17 | INTEGER | read-write | mandatory |
| humidityDelayHighWarning OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'High Warning' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.3.1.18 | INTEGER | read-write | mandatory |
| humidityDelayHighCritical OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'High Critical' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.3.1.19 | INTEGER | read-write | mandatory |
| humidityRaw OBJECT-TYPE The sensor's unformatted (raw) value that is being read directly from sensor, before it is converted to the preferred value. | 1.3.6.1.4.1.3854.3.5.3.1.20 | INTEGER | read-only | mandatory |
| humidityOffset OBJECT-TYPE The offset value for this sensor. It's used to adjust the reading value in case the reading is incorrect. | 1.3.6.1.4.1.3854.3.5.3.1.21 | INTEGER | read-write | mandatory |
| humidityPort OBJECT-TYPE The device's sensor port number, where this sensor is plugged in to. | 1.3.6.1.4.1.3854.3.5.3.1.35 | INTEGER | read-only | mandatory |
| humiditySubPort OBJECT-TYPE The logical port number of this sensor in the array, or in a set of sensors. For Humidity Sensor, it's for the Dual Sensors. | 1.3.6.1.4.1.3854.3.5.3.1.36 | INTEGER | read-only | mandatory |
| humidityDisplayStyle OBJECT-TYPE The sensor's Display Style for the Web UI, to display the reading as a gauge or bar. 0 = bar style, 1 = gauge style. | 1.3.6.1.4.1.3854.3.5.3.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| humidityHighCriticalDescription OBJECT-TYPE The user specified 'High Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.3.1.46 | DisplayString | read-write | mandatory |
| humidityLowCriticalDescription OBJECT-TYPE The user specified 'Low Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.3.1.47 | DisplayString | read-write | mandatory |
| humiditySensorNormalDescription OBJECT-TYPE The user specified 'Normal' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.3.1.48 | DisplayString | read-write | mandatory |
| humidityLowWarningDescription OBJECT-TYPE The user specified 'Low Warning' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.3.1.49 | DisplayString | read-write | mandatory |
| humidityHighWarningDescription OBJECT-TYPE The user specified 'High Warning' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.3.1.50 | DisplayString | read-write | mandatory |
| humiditySensorErrorDescription OBJECT-TYPE The user specified 'Sensor Error' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.3.1.51 | DisplayString | read-write | mandatory |
| humidityHighCriticalColor OBJECT-TYPE The user specified 'High Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.3.1.54 | INTEGER | read-write | mandatory |
| humidityLowCriticalColor OBJECT-TYPE The user specified 'Low Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.3.1.55 | INTEGER | read-write | mandatory |
| humiditySensorNormalColor OBJECT-TYPE The user specified 'Normal' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.3.1.56 | INTEGER | read-write | mandatory |
| humidityLowWarningColor OBJECT-TYPE The user specified 'Low Warning' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.3.1.57 | INTEGER | read-write | mandatory |
| humidityHighWarningColor OBJECT-TYPE The user specified 'High Warning' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.3.1.58 | INTEGER | read-write | mandatory |
| humiditySensorErrorColor OBJECT-TYPE The user specified 'Sensor Error' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.3.1.59 | INTEGER | read-write | mandatory |
| humidityAcknowledge OBJECT-TYPE The acknowledge status for the current status of the sensor: 0 = the status has been changed and waiting to be acknowledged, 1 = status is normal or have been already acknowledged, 2 = acknowledge the current status (this status is write-only) | 1.3.6.1.4.1.3854.3.5.3.1.70 | INTEGER {not-acked(0), acked(1), ack(2)} | read-write | mandatory |
| humidityId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.3.1.1000 | INTEGER | read-only | mandatory |
| drycontactTable OBJECT-TYPE This table contains the properties for each drycontact sensor | 1.3.6.1.4.1.3854.3.5.4 | not-accessible | mandatory | |
| drycontactEntry OBJECT-TYPE | 1.3.6.1.4.1.3854.3.5.4.1 | not-accessible | mandatory | |
| drycontactIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.4.1.1 | DisplayString | read-only | mandatory |
| drycontactDescription OBJECT-TYPE The user specified description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.4.1.2 | DisplayString | read-write | mandatory |
| drycontactType OBJECT-TYPE The type of the sensor; it represents the sensor's functionality. For the drycontact sensor, it has 3 sub-types: drycontact-input, drycontact-output and drycontact-array. | 1.3.6.1.4.1.3854.3.5.4.1.3 | INTEGER {drycontact-inout(7), drycontact-input(8), drycontact-array(22)} | read-only | mandatory |
| drycontactStatus OBJECT-TYPE The current status of this sensor. | 1.3.6.1.4.1.3854.3.5.4.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), outputLow(8), outputHigh(9)} | read-only | mandatory |
| drycontactGoOffline OBJECT-TYPE Command to offline this sensor: use value '2' to set the sensor offline. | 1.3.6.1.4.1.3854.3.5.4.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| drycontactDirection OBJECT-TYPE The functional direction of this drycontact sensors: use value '0' for input drycontact and '1' for output drycontact | 1.3.6.1.4.1.3854.3.5.4.1.22 | INTEGER {input(0), output(1)} | read-write | mandatory |
| drycontactNormalState OBJECT-TYPE The normal state of the input drycontact. If an input switch is in this state it is normal, else it is critical. An open drycontact senses +5 volts. A closed drycontact senses 0 volts. | 1.3.6.1.4.1.3854.3.5.4.1.23 | INTEGER {closed(0), open(1)} | read-write | mandatory |
| drycontactControlMode OBJECT-TYPE The Control Mode for controlling this drycontact sensor with, it can be one of these: Manual, Notification, Time, Thermostat. | 1.3.6.1.4.1.3854.3.5.4.1.24 | INTEGER {manual-control(0), sensor-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| drycontactOutputManualCycleTime OBJECT-TYPE The time in seconds that the drycontact will stay in a state, before changing to the next state in case the cycle action have been used. | 1.3.6.1.4.1.3854.3.5.4.1.25 | INTEGER | read-write | mandatory |
| drycontactOutputManualAction OBJECT-TYPE The manual output control for the drycontact state: Low, High, Toggle Low-High, Toggle High-Low. | 1.3.6.1.4.1.3854.3.5.4.1.26 | INTEGER {low(0), high(1), cycle-Low-High-Low(2), cycle-High-Low-High(3)} | read-write | mandatory |
| drycontactPort OBJECT-TYPE The device's sensor port number, where this sensor is plugged in to. | 1.3.6.1.4.1.3854.3.5.4.1.35 | INTEGER | read-only | mandatory |
| drycontactSubPort OBJECT-TYPE The logical port number of this sensor in the array, or in a set of sensors. | 1.3.6.1.4.1.3854.3.5.4.1.36 | INTEGER | read-only | mandatory |
| drycontactCriticalDescription OBJECT-TYPE The user specified 'Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.4.1.46 | DisplayString | read-write | mandatory |
| drycontactNormalDescription OBJECT-TYPE The user specified 'Normal' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.4.1.48 | DisplayString | read-write | mandatory |
| drycontactOnDescription OBJECT-TYPE The user specified 'On' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.4.1.52 | DisplayString | read-write | mandatory |
| drycontactOffDescription OBJECT-TYPE The user specified 'Off' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.4.1.53 | DisplayString | read-write | mandatory |
| drycontactCriticalColor OBJECT-TYPE The user specified 'Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.4.1.54 | INTEGER | read-write | mandatory |
| drycontactNormalColor OBJECT-TYPE The user specified 'Normal' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.4.1.56 | INTEGER | read-write | mandatory |
| drycontactOnColor OBJECT-TYPE The user specified 'On' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.4.1.60 | INTEGER | read-write | mandatory |
| drycontactOffColor OBJECT-TYPE The user specified 'Off' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.4.1.61 | INTEGER | read-write | mandatory |
| drycontactAcknowledge OBJECT-TYPE The acknowledge status for the current status of the sensor: 0 = the status has been changed and waiting to be acknowledged, 1 = status is normal or have been already acknowledged, 2 = acknowledge the current status (this status is write-only) | 1.3.6.1.4.1.3854.3.5.4.1.70 | INTEGER {not-acked(0), acked(1), ack(2)} | read-write | mandatory |
| drycontactId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.4.1.1000 | INTEGER | read-only | mandatory |
| current4to20mATable OBJECT-TYPE This table contains the properties for each 4-20mAmp sensor | 1.3.6.1.4.1.3854.3.5.5 | not-accessible | mandatory | |
| current4to20mAEntry OBJECT-TYPE | 1.3.6.1.4.1.3854.3.5.5.1 | not-accessible | mandatory | |
| current4to20mAIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.5.1.1 | DisplayString | read-only | mandatory |
| current4to20mADescription OBJECT-TYPE The user specified description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.5.1.2 | DisplayString | read-write | mandatory |
| current4to20mAValue OBJECT-TYPE The value in numerical reading. | 1.3.6.1.4.1.3854.3.5.5.1.4 | INTEGER | read-only | mandatory |
| current4to20mAUnit OBJECT-TYPE The sensor's value unit string, in what the sensor's value is read in. | 1.3.6.1.4.1.3854.3.5.5.1.5 | DisplayString | read-write | mandatory |
| current4to20mAStatus OBJECT-TYPE The current status of this sensor. | 1.3.6.1.4.1.3854.3.5.5.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| current4to20mAGoOffline OBJECT-TYPE Command to offline this sensor: use value '2' to set the sensor offline. | 1.3.6.1.4.1.3854.3.5.5.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| current4to20mALowCritical OBJECT-TYPE The user specified 'Low Critical' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.5.1.9 | INTEGER | read-write | mandatory |
| current4to20mALowWarning OBJECT-TYPE The user specified 'Low Warning' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.5.1.10 | INTEGER | read-write | mandatory |
| current4to20mAHighWarning OBJECT-TYPE The user specified 'High Warning' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.5.1.11 | INTEGER | read-write | mandatory |
| current4to20mAHighCritical OBJECT-TYPE The user specified 'High Critical' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.5.1.12 | INTEGER | read-write | mandatory |
| current4to20mARearm OBJECT-TYPE This value tells how many values the sensor has to reach beyond the threshold value, before changing to a new status. Useful to prevent the quick fluctuation of readings. | 1.3.6.1.4.1.3854.3.5.5.1.13 | INTEGER | read-write | mandatory |
| current4to20mADelayError OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Error' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.5.1.14 | INTEGER | read-write | mandatory |
| current4to20mADelayNormal OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Normal' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.5.1.15 | INTEGER | read-write | mandatory |
| current4to20mADelayLowCritical OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Low Critical' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.5.1.16 | INTEGER | read-write | mandatory |
| current4to20mADelayLowWarning OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Low Warning' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.5.1.17 | INTEGER | read-write | mandatory |
| current4to20mADelayHighWarning OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'High Warning' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.5.1.18 | INTEGER | read-write | mandatory |
| current4to20mADelayHighCritical OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'High Critical' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.5.1.19 | INTEGER | read-write | mandatory |
| current4to20mARaw OBJECT-TYPE The sensor's unformatted (raw) value that is being read directly from sensor, before it is converted to the preferred value. | 1.3.6.1.4.1.3854.3.5.5.1.20 | INTEGER | read-only | mandatory |
| current4to20mAOffset OBJECT-TYPE The offset value for this sensor. It's used to adjust the reading value in case the reading is incorrect. | 1.3.6.1.4.1.3854.3.5.5.1.21 | INTEGER | read-write | mandatory |
| current4to20mAAmountMaxVoltage OBJECT-TYPE The maximum scale of 4to20mA conversion. | 1.3.6.1.4.1.3854.3.5.5.1.33 | INTEGER | read-write | mandatory |
| current4to20mAAmountBaseVoltage OBJECT-TYPE The base scale of 4to20mA conversion. | 1.3.6.1.4.1.3854.3.5.5.1.34 | INTEGER | read-write | mandatory |
| current4to20mAPort OBJECT-TYPE The device's sensor port number, where this sensor is plugged in to. | 1.3.6.1.4.1.3854.3.5.5.1.35 | INTEGER | read-only | mandatory |
| current4to20mASubPort OBJECT-TYPE The logical port number of this sensor in the array, or in a set of sensors. For Temperature Sensor, it's for the array of Temperature Sensors and Dual Sensors. For example x.1, x.2, x.3 ... | 1.3.6.1.4.1.3854.3.5.5.1.36 | INTEGER | read-only | mandatory |
| current4to20mAMaxVoltage OBJECT-TYPE The maximum range for use in conversion. | 1.3.6.1.4.1.3854.3.5.5.1.43 | INTEGER | read-write | mandatory |
| current4to20mABaseVoltage OBJECT-TYPE The base range for use in conversion. | 1.3.6.1.4.1.3854.3.5.5.1.44 | INTEGER | read-write | mandatory |
| current4to20mADisplayStyle OBJECT-TYPE The sensor's Display Style for the Web UI, to display the reading as a gauge or bar. 0 = bar style, 1 = gauge style. | 1.3.6.1.4.1.3854.3.5.5.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| current4to20mAHighCriticalDescription OBJECT-TYPE The user specified 'High Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.5.1.46 | DisplayString | read-write | mandatory |
| current4to20mALowCriticalDescription OBJECT-TYPE The user specified 'Low Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.5.1.47 | DisplayString | read-write | mandatory |
| current4to20mANormalDescription OBJECT-TYPE The user specified 'Normal' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.5.1.48 | DisplayString | read-write | mandatory |
| current4to20mALowWarningDescription OBJECT-TYPE The user specified 'Low Warning' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.5.1.49 | DisplayString | read-write | mandatory |
| current4to20mAHighWarningDescription OBJECT-TYPE The user specified 'High Warning' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.5.1.50 | DisplayString | read-write | mandatory |
| current4to20mASensorErrorDescription OBJECT-TYPE The user specified 'Sensor Error' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.5.1.51 | DisplayString | read-write | mandatory |
| current4to20mAHighCriticalColor OBJECT-TYPE The user specified 'High Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.5.1.54 | INTEGER | read-write | mandatory |
| current4to20mALowCriticalColor OBJECT-TYPE The user specified 'Low Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.5.1.55 | INTEGER | read-write | mandatory |
| current4to20mANormalColor OBJECT-TYPE The user specified 'Normal' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.5.1.56 | INTEGER | read-write | mandatory |
| current4to20mALowWarningColor OBJECT-TYPE The user specified 'Low Warning' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.5.1.57 | INTEGER | read-write | mandatory |
| current4to20mAHighWarningColor OBJECT-TYPE The user specified 'High Warning' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.5.1.58 | INTEGER | read-write | mandatory |
| current4to20mASensorErrorColor OBJECT-TYPE The user specified 'Sensor Error' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.5.1.59 | INTEGER | read-write | mandatory |
| current4to20mAAcknowledge OBJECT-TYPE The acknowledge status for the current status of the sensor: 0 = the status has been changed and waiting to be acknowledged, 1 = status is normal or have been already acknowledged, 2 = acknowledge the current status (this status is write-only) | 1.3.6.1.4.1.3854.3.5.5.1.70 | INTEGER {not-acked(0), acked(1), ack(2)} | read-write | mandatory |
| current4to20mAId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.5.1.1000 | INTEGER | read-only | mandatory |
| dcVoltageTable OBJECT-TYPE This table contains the properties for each DC voltage sensor | 1.3.6.1.4.1.3854.3.5.6 | not-accessible | mandatory | |
| dcVoltageEntry OBJECT-TYPE | 1.3.6.1.4.1.3854.3.5.6.1 | not-accessible | mandatory | |
| dcVoltageIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.6.1.1 | DisplayString | read-only | mandatory |
| dcVoltageDescription OBJECT-TYPE The user specified description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.6.1.2 | DisplayString | read-write | mandatory |
| dcVoltageValue OBJECT-TYPE The value in numerical reading. | 1.3.6.1.4.1.3854.3.5.6.1.4 | INTEGER | read-only | mandatory |
| dcVoltageUnit OBJECT-TYPE The sensor's value unit string, in what the sensor's value is read in. | 1.3.6.1.4.1.3854.3.5.6.1.5 | DisplayString | read-write | mandatory |
| dcVoltageStatus OBJECT-TYPE The current status of this sensor. | 1.3.6.1.4.1.3854.3.5.6.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| dcVoltageGoOffline OBJECT-TYPE Command to offline this sensor: use value '2' to set the sensor offline. | 1.3.6.1.4.1.3854.3.5.6.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| dcVoltageLowCritical OBJECT-TYPE The user specified 'Low Critical' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.6.1.9 | INTEGER | read-write | mandatory |
| dcVoltageLowWarning OBJECT-TYPE The user specified 'Low Warning' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.6.1.10 | INTEGER | read-write | mandatory |
| dcVoltageHighWarning OBJECT-TYPE The user specified 'High Warning' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.6.1.11 | INTEGER | read-write | mandatory |
| dcVoltageHighCritical OBJECT-TYPE The user specified 'High Critical' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.6.1.12 | INTEGER | read-write | mandatory |
| dcVoltageRearm OBJECT-TYPE This value tells how many values the sensor has to reach beyond the threshold value, before changing to a new status. Useful to prevent the quick fluctuation of readings. | 1.3.6.1.4.1.3854.3.5.6.1.13 | INTEGER | read-write | mandatory |
| dcVoltageDelayError OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Error' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.6.1.14 | INTEGER | read-write | mandatory |
| dcVoltageDelayNormal OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Normal' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.6.1.15 | INTEGER | read-write | mandatory |
| dcVoltageDelayLowCritical OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Low Critical' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.6.1.16 | INTEGER | read-write | mandatory |
| dcVoltageDelayLowWarning OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Low Warning' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.6.1.17 | INTEGER | read-write | mandatory |
| dcVoltageDelayHighWarning OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'High Warning' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.6.1.18 | INTEGER | read-write | mandatory |
| dcVoltageDelayHighCritical OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'High Critical' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.6.1.19 | INTEGER | read-write | mandatory |
| dcVoltageRaw OBJECT-TYPE The sensor's unformatted (raw) value that is being read directly from sensor, before it is converted to the preferred value. | 1.3.6.1.4.1.3854.3.5.6.1.20 | INTEGER | read-only | mandatory |
| dcVoltageOffset OBJECT-TYPE The offset value for this sensor. It's used to adjust the reading value in case the reading is incorrect. | 1.3.6.1.4.1.3854.3.5.6.1.21 | INTEGER | read-write | mandatory |
| dcVoltageJumper OBJECT-TYPE Selected voltage scale (jumper 0) in DC voltage conversion. | 1.3.6.1.4.1.3854.3.5.6.1.32 | INTEGER {jumperAt-60(-600), jumperAt-40(-400), jumperAt-30(-300), jumperAt-20(-200), jumperAt-10(-100), jumperAt10(100), jumperAt20(200), jumperAt30(300), jumperAt40(400), jumperAt60(600)} | read-write | mandatory |
| dcVoltageAmountMaxVoltage OBJECT-TYPE The maximum scale of DC voltage conversion. | 1.3.6.1.4.1.3854.3.5.6.1.33 | INTEGER | read-write | mandatory |
| dcVoltageAmountBaseVoltage OBJECT-TYPE The base scale of DC voltage conversion. | 1.3.6.1.4.1.3854.3.5.6.1.34 | INTEGER | read-write | mandatory |
| dcVoltagePort OBJECT-TYPE The device's sensor port number, where this sensor is plugged in to. | 1.3.6.1.4.1.3854.3.5.6.1.35 | INTEGER | read-only | mandatory |
| dcVoltageSubPort OBJECT-TYPE The logical port number of this sensor in the array, or in a set of sensors. For Temperature Sensor, it's for the array of Temperature Sensors and Dual Sensors. For example x.1, x.2, x.3 ... | 1.3.6.1.4.1.3854.3.5.6.1.36 | INTEGER | read-only | mandatory |
| dcVoltageMaxVoltage OBJECT-TYPE The maximum voltage range for use in conversion. | 1.3.6.1.4.1.3854.3.5.6.1.43 | INTEGER | read-write | mandatory |
| dcVoltageBaseVoltage OBJECT-TYPE The base voltage range for use in conversion. | 1.3.6.1.4.1.3854.3.5.6.1.44 | INTEGER | read-write | mandatory |
| dcVoltageDisplayStyle OBJECT-TYPE The sensor's Display Style for the Web UI, to display the reading as a gauge or bar. 0 = bar style, 1 = gauge style. | 1.3.6.1.4.1.3854.3.5.6.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| dcVoltageHighCriticalDescription OBJECT-TYPE The user specified 'High Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.6.1.46 | DisplayString | read-write | mandatory |
| dcVoltageLowCriticalDescription OBJECT-TYPE The user specified 'Low Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.6.1.47 | DisplayString | read-write | mandatory |
| dcVoltageNormalDescription OBJECT-TYPE The user specified 'Normal' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.6.1.48 | DisplayString | read-write | mandatory |
| dcVoltageLowWarningDescription OBJECT-TYPE The user specified 'Low Warning' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.6.1.49 | DisplayString | read-write | mandatory |
| dcVoltageHighWarningDescription OBJECT-TYPE The user specified 'High Warning' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.6.1.50 | DisplayString | read-write | mandatory |
| dcVoltageSensorErrorDescription OBJECT-TYPE The user specified 'Sensor Error' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.6.1.51 | DisplayString | read-write | mandatory |
| dcVoltageHighCriticalColor OBJECT-TYPE The user specified 'High Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.6.1.54 | INTEGER | read-write | mandatory |
| dcVoltageLowCriticalColor OBJECT-TYPE The user specified 'Low Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.6.1.55 | INTEGER | read-write | mandatory |
| dcVoltageNormalColor OBJECT-TYPE The user specified 'Normal' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.6.1.56 | INTEGER | read-write | mandatory |
| dcVoltageLowWarningColor OBJECT-TYPE The user specified 'Low Warning' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.6.1.57 | INTEGER | read-write | mandatory |
| dcVoltageHighWarningColor OBJECT-TYPE The user specified 'High Warning' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.6.1.58 | INTEGER | read-write | mandatory |
| dcVoltageSensorErrorColor OBJECT-TYPE The user specified 'Sensor Error' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.6.1.59 | INTEGER | read-write | mandatory |
| dcVoltageAcknowledge OBJECT-TYPE The acknowledge status for the current status of the sensor: 0 = the status has been changed and waiting to be acknowledged, 1 = status is normal or have been already acknowledged, 2 = acknowledge the current status (this status is write-only) | 1.3.6.1.4.1.3854.3.5.6.1.70 | INTEGER {not-acked(0), acked(1), ack(2)} | read-write | mandatory |
| dcVoltageId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.6.1.1000 | INTEGER | read-only | mandatory |
| airflowTable OBJECT-TYPE This table contains the properties for each airflow sensor | 1.3.6.1.4.1.3854.3.5.7 | not-accessible | mandatory | |
| airflowEntry OBJECT-TYPE | 1.3.6.1.4.1.3854.3.5.7.1 | not-accessible | mandatory | |
| airflowIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.7.1.1 | DisplayString | read-only | mandatory |
| airflowDescription OBJECT-TYPE The user specified description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.7.1.2 | DisplayString | read-write | mandatory |
| airflowValue OBJECT-TYPE The value in numerical reading. | 1.3.6.1.4.1.3854.3.5.7.1.4 | INTEGER | read-only | mandatory |
| airflowStatus OBJECT-TYPE The current status of this sensor. | 1.3.6.1.4.1.3854.3.5.7.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| airflowGoOffline OBJECT-TYPE Command to offline this sensor: use value '2' to set the sensor offline. | 1.3.6.1.4.1.3854.3.5.7.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| airflowLowCritical OBJECT-TYPE The user specified 'Low Critical' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.7.1.9 | INTEGER | read-write | mandatory |
| airflowLowWarning OBJECT-TYPE The user specified 'Low Warning' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.7.1.10 | INTEGER | read-write | mandatory |
| airflowHighWarning OBJECT-TYPE The user specified 'High Warning' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.7.1.11 | INTEGER | read-write | mandatory |
| airflowHighCritical OBJECT-TYPE The user specified 'High Critical' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.7.1.12 | INTEGER | read-write | mandatory |
| airflowRearm OBJECT-TYPE This value tells how many values the sensor has to reach beyond the threshold value, before changing to a new status. Useful to prevent the quick fluctuation of readings. | 1.3.6.1.4.1.3854.3.5.7.1.13 | INTEGER | read-write | mandatory |
| airflowDelayError OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Error' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.7.1.14 | INTEGER | read-write | mandatory |
| airflowDelayNormal OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Normal' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.7.1.15 | INTEGER | read-write | mandatory |
| airflowDelayLowCritical OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Low Critical' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.7.1.16 | INTEGER | read-write | mandatory |
| airflowDelayLowWarning OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Low Warning' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.7.1.17 | INTEGER | read-write | mandatory |
| airflowDelayHighWarning OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'High Warning' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.7.1.18 | INTEGER | read-write | mandatory |
| airflowDelayHighCritical OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'High Critical' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.7.1.19 | INTEGER | read-write | mandatory |
| airflowRaw OBJECT-TYPE The sensor's unformatted (raw) value that is being read directly from sensor, before it is converted to the preferred value. | 1.3.6.1.4.1.3854.3.5.7.1.20 | INTEGER | read-only | mandatory |
| airflowPort OBJECT-TYPE The device's sensor port number, where this sensor is plugged in to. | 1.3.6.1.4.1.3854.3.5.7.1.35 | INTEGER | read-only | mandatory |
| airflowSubPort OBJECT-TYPE The logical port number of this sensor in the array, or in a set of sensors. | 1.3.6.1.4.1.3854.3.5.7.1.36 | INTEGER | read-only | mandatory |
| airflowDisplayStyle OBJECT-TYPE The sensor's Display Style for the Web UI, to display the reading as a gauge or bar. 0 = bar style, 1 = gauge style. | 1.3.6.1.4.1.3854.3.5.7.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| airflowHighCriticalDescription OBJECT-TYPE The user specified 'High Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.7.1.46 | DisplayString | read-write | mandatory |
| airflowLowCriticalDescription OBJECT-TYPE The user specified 'Low Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.7.1.47 | DisplayString | read-write | mandatory |
| airflowNormalDescription OBJECT-TYPE The user specified 'Normal' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.7.1.48 | DisplayString | read-write | mandatory |
| airflowLowWarningDescription OBJECT-TYPE The user specified 'Low Warning' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.7.1.49 | DisplayString | read-write | mandatory |
| airflowHighWarningDescription OBJECT-TYPE The user specified 'High Warning' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.7.1.50 | DisplayString | read-write | mandatory |
| airflowSensorErrorDescription OBJECT-TYPE The user specified 'Sensor Error' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.7.1.51 | DisplayString | read-write | mandatory |
| airflowHighCriticalColor OBJECT-TYPE The user specified 'High Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.7.1.54 | INTEGER | read-write | mandatory |
| airflowLowCriticalColor OBJECT-TYPE The user specified 'Low Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.7.1.55 | INTEGER | read-write | mandatory |
| airflowNormalColor OBJECT-TYPE The user specified 'Normal' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.7.1.56 | INTEGER | read-write | mandatory |
| airflowLowWarningColor OBJECT-TYPE The user specified 'Low Warning' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.7.1.57 | INTEGER | read-write | mandatory |
| airflowHighWarningColor OBJECT-TYPE The user specified 'High Warning' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.7.1.58 | INTEGER | read-write | mandatory |
| airflowSensorErrorColor OBJECT-TYPE The user specified 'Sensor Error' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.7.1.59 | INTEGER | read-write | mandatory |
| airflowAcknowledge OBJECT-TYPE The acknowledge status for the current status of the sensor: 0 = the status has been changed and waiting to be acknowledged, 1 = status is normal or have been already acknowledged, 2 = acknowledge the current status (this status is write-only) | 1.3.6.1.4.1.3854.3.5.7.1.70 | INTEGER {not-acked(0), acked(1), ack(2)} | read-write | mandatory |
| airflowId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.7.1.1000 | INTEGER | read-only | mandatory |
| motionTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.3.5.8 | not-accessible | mandatory | |
| motionEntry OBJECT-TYPE | 1.3.6.1.4.1.3854.3.5.8.1 | not-accessible | mandatory | |
| motionIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.8.1.1 | DisplayString | read-only | mandatory |
| motionDescription OBJECT-TYPE A Description of this sensor Switch | 1.3.6.1.4.1.3854.3.5.8.1.2 | DisplayString | read-write | mandatory |
| motionStatus OBJECT-TYPE The current status of this Sensor, only input switches have a status | 1.3.6.1.4.1.3854.3.5.8.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| motionGoOffline OBJECT-TYPE To take offline enter a 2 | 1.3.6.1.4.1.3854.3.5.8.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| motionPort OBJECT-TYPE Sensor port | 1.3.6.1.4.1.3854.3.5.8.1.35 | INTEGER | read-only | mandatory |
| motionSubPort OBJECT-TYPE Sensor sub port | 1.3.6.1.4.1.3854.3.5.8.1.36 | INTEGER | read-only | mandatory |
| motionCriticalDescription OBJECT-TYPE A Critical Description of this sensor | 1.3.6.1.4.1.3854.3.5.8.1.46 | DisplayString | read-write | mandatory |
| motionNormalDescription OBJECT-TYPE A Normal Description of this sensor | 1.3.6.1.4.1.3854.3.5.8.1.48 | DisplayString | read-write | mandatory |
| motionCriticalColor OBJECT-TYPE A Critical Color of this sensor | 1.3.6.1.4.1.3854.3.5.8.1.54 | INTEGER | read-write | mandatory |
| motionNormalColor OBJECT-TYPE A Normal Color of this sensor | 1.3.6.1.4.1.3854.3.5.8.1.56 | INTEGER | read-write | mandatory |
| motionAcknowledge OBJECT-TYPE Motion sensor acknowledge | 1.3.6.1.4.1.3854.3.5.8.1.70 | INTEGER {acked(2)} | read-write | mandatory |
| motionId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.8.1.1000 | INTEGER | read-only | mandatory |
| waterTable OBJECT-TYPE This table contains the properties for each water sensor | 1.3.6.1.4.1.3854.3.5.9 | not-accessible | mandatory | |
| waterEntry OBJECT-TYPE | 1.3.6.1.4.1.3854.3.5.9.1 | not-accessible | mandatory | |
| waterIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.9.1.1 | DisplayString | read-only | mandatory |
| waterDescription OBJECT-TYPE The user specified description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.9.1.2 | DisplayString | read-write | mandatory |
| waterStatus OBJECT-TYPE The current status of this sensor. | 1.3.6.1.4.1.3854.3.5.9.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| waterGoOffline OBJECT-TYPE Command to offline this sensor: use value '2' to set the sensor offline. | 1.3.6.1.4.1.3854.3.5.9.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| waterPort OBJECT-TYPE The device's sensor port number, where this sensor is plugged in to. | 1.3.6.1.4.1.3854.3.5.9.1.35 | INTEGER | read-only | mandatory |
| waterSubPort OBJECT-TYPE The logical port number of this sensor in the array, or in a set of sensors. For Temperature Sensor, it's for the array of Temperature Sensors and Dual Sensors. For example x.1, x.2, x.3 ... | 1.3.6.1.4.1.3854.3.5.9.1.36 | INTEGER | read-only | mandatory |
| waterCriticalDescription OBJECT-TYPE The user specified 'Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.9.1.46 | DisplayString | read-write | mandatory |
| waterNormalDescription OBJECT-TYPE The user specified 'Normal' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.9.1.48 | DisplayString | read-write | mandatory |
| waterCriticalColor OBJECT-TYPE The user specified 'Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.9.1.54 | INTEGER | read-write | mandatory |
| waterNormalColor OBJECT-TYPE The user specified 'Normal' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.9.1.56 | INTEGER | read-write | mandatory |
| waterAcknowledge OBJECT-TYPE The acknowledge status for the current status of the sensor: 0 = the status has been changed and waiting to be acknowledged, 1 = status is normal or have been already acknowledged, 2 = acknowledge the current status (this status is write-only) | 1.3.6.1.4.1.3854.3.5.9.1.70 | INTEGER {not-acked(0), acked(1), ack(2)} | read-write | mandatory |
| waterId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.9.1.1000 | INTEGER | read-only | mandatory |
| securityTable OBJECT-TYPE This table contains the properties for each security sensor | 1.3.6.1.4.1.3854.3.5.10 | not-accessible | mandatory | |
| securityEntry OBJECT-TYPE | 1.3.6.1.4.1.3854.3.5.10.1 | not-accessible | mandatory | |
| securityIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.10.1.1 | DisplayString | read-only | mandatory |
| securityDescription OBJECT-TYPE The user specified description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.10.1.2 | DisplayString | read-write | mandatory |
| securityStatus OBJECT-TYPE The current status of this sensor. | 1.3.6.1.4.1.3854.3.5.10.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| securityGoOffline OBJECT-TYPE Command to offline this sensor: use value '2' to set the sensor offline. | 1.3.6.1.4.1.3854.3.5.10.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| securityPort OBJECT-TYPE The device's sensor port number, where this sensor is plugged in to. | 1.3.6.1.4.1.3854.3.5.10.1.35 | INTEGER | read-only | mandatory |
| securitySubPort OBJECT-TYPE The logical port number of this sensor in the array, or in a set of sensors. | 1.3.6.1.4.1.3854.3.5.10.1.36 | INTEGER | read-only | mandatory |
| securityCriticalDescription OBJECT-TYPE The user specified 'Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.10.1.46 | DisplayString | read-write | mandatory |
| securityNormalDescription OBJECT-TYPE The user specified 'Normal' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.10.1.48 | DisplayString | read-write | mandatory |
| securityCriticalColor OBJECT-TYPE The user specified 'Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.10.1.54 | INTEGER | read-write | mandatory |
| securityNormalColor OBJECT-TYPE The user specified 'Normal' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.10.1.56 | INTEGER | read-write | mandatory |
| securityAcknowledge OBJECT-TYPE The acknowledge status for the current status of the sensor: 0 = the status has been changed and waiting to be acknowledged, 1 = status is normal or have been already acknowledged, 2 = acknowledge the current status (this status is write-only) | 1.3.6.1.4.1.3854.3.5.10.1.70 | INTEGER {not-acked(0), acked(1), ack(2)} | read-write | mandatory |
| securityId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.10.1.1000 | INTEGER | read-only | mandatory |
| sirenTable OBJECT-TYPE This table contains the property and reading value for siren sensor. | 1.3.6.1.4.1.3854.3.5.11 | not-accessible | mandatory | |
| sirenEntry OBJECT-TYPE | 1.3.6.1.4.1.3854.3.5.11.1 | not-accessible | mandatory | |
| sirenIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.11.1.1 | DisplayString | read-only | mandatory |
| sirenDescription OBJECT-TYPE The user specified description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.11.1.2 | DisplayString | read-write | mandatory |
| sirenStatus OBJECT-TYPE The current status of this sensor. | 1.3.6.1.4.1.3854.3.5.11.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| sirenGoOffline OBJECT-TYPE Command to offline this sensor: use value '2' to set the sensor offline. | 1.3.6.1.4.1.3854.3.5.11.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| sirenControlMode OBJECT-TYPE The Control Mode for controlling this siren sensor with, it can be one of these: Manual, Notification, Time, Thermostat. | 1.3.6.1.4.1.3854.3.5.11.1.24 | INTEGER {manual-control(0), sensor-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| sirenManualCycleTime OBJECT-TYPE The time in seconds that the relay will stay in a state, before changing to the next state in case the cycle action have been used. | 1.3.6.1.4.1.3854.3.5.11.1.25 | INTEGER (1..255) | read-write | mandatory |
| sirenManualAction OBJECT-TYPE The manual control for the relay state: Off, On, Toggle Off-On, Toggle On-Off. | 1.3.6.1.4.1.3854.3.5.11.1.26 | INTEGER {turn-On(0), turn-Off(1), cycle-On-Off-On(2), cycle-Off-On-Off(3)} | read-write | mandatory |
| sirenPort OBJECT-TYPE The device's sensor port number, where this sensor is plugged in to. | 1.3.6.1.4.1.3854.3.5.11.1.35 | INTEGER | read-only | mandatory |
| sirenSubPort OBJECT-TYPE The logical port number of this sensor in the array, or in a set of sensors. | 1.3.6.1.4.1.3854.3.5.11.1.36 | INTEGER | read-only | mandatory |
| sirenOnDescription OBJECT-TYPE The user specified 'On' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.11.1.52 | DisplayString | read-write | mandatory |
| sirenOffDescription OBJECT-TYPE The user specified 'Off' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.11.1.53 | DisplayString | read-write | mandatory |
| sirenOnColor OBJECT-TYPE The user specified 'On' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.11.1.60 | INTEGER | read-write | mandatory |
| sirenOffColor OBJECT-TYPE The user specified 'Off' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.11.1.61 | INTEGER | read-write | mandatory |
| sirenAcknowledge OBJECT-TYPE The acknowledge status for the current status of the sensor: 0 = the status has been changed and waiting to be acknowledged, 1 = status is normal or have been already acknowledged, 2 = acknowledge the current status (this status is write-only) | 1.3.6.1.4.1.3854.3.5.11.1.70 | INTEGER {not-acked(0), acked(1), ack(2)} | read-write | mandatory |
| sirenId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.11.1.1000 | INTEGER | read-only | mandatory |
| relayTable OBJECT-TYPE This table contains the properties for each relay sensor | 1.3.6.1.4.1.3854.3.5.12 | not-accessible | mandatory | |
| relayEntry OBJECT-TYPE | 1.3.6.1.4.1.3854.3.5.12.1 | not-accessible | mandatory | |
| relayIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.12.1.1 | DisplayString | read-only | mandatory |
| relayDescription OBJECT-TYPE The user specified description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.12.1.2 | DisplayString | read-write | mandatory |
| relayType OBJECT-TYPE The type of the sensor; it represents the sensor's functionality. For the relay sensor, it has 2 sub-type: normal relay, and xrelay. | 1.3.6.1.4.1.3854.3.5.12.1.3 | INTEGER {relay(13), xrelay(19)} | read-only | mandatory |
| relayStatus OBJECT-TYPE The current status of this sensor. | 1.3.6.1.4.1.3854.3.5.12.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| relayGoOffline OBJECT-TYPE Command to offline this sensor: use value '2' to set the sensor offline. | 1.3.6.1.4.1.3854.3.5.12.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| relayControlMode OBJECT-TYPE The Control Mode for controlling this relay sensor with, it can be one of these: Manual, Notification, Time, Thermostat. | 1.3.6.1.4.1.3854.3.5.12.1.24 | INTEGER {manual-control(0), sensor-control(1), time-control(2), thermostat-control(3)} | read-write | mandatory |
| relayManualCycleTime OBJECT-TYPE The time in seconds that the relay will stay in a state, before changing to the next state in case the cycle action have been used. | 1.3.6.1.4.1.3854.3.5.12.1.25 | INTEGER (1..255) | read-write | mandatory |
| relayManualAction OBJECT-TYPE The manual control for the relay state: Off, On, Toggle Off-On, Toggle On-Off. | 1.3.6.1.4.1.3854.3.5.12.1.26 | INTEGER {turn-On(0), turn-Off(1), cycle-On-Off-On(2), cycle-Off-On-Off(3)} | read-write | mandatory |
| relayPort OBJECT-TYPE The device's sensor port number, where this sensor is plugged in to. | 1.3.6.1.4.1.3854.3.5.12.1.35 | INTEGER | read-only | mandatory |
| relaySubPort OBJECT-TYPE The logical port number of this sensor on the array of a relay (xelay) sensor. For example x.1, x.2, x.3 ... | 1.3.6.1.4.1.3854.3.5.12.1.36 | INTEGER | read-only | mandatory |
| relayOnDesc OBJECT-TYPE The user specified 'On' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.12.1.52 | DisplayString | read-write | mandatory |
| relayOffDesc OBJECT-TYPE The user specified 'Off' Description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.12.1.53 | DisplayString | read-write | mandatory |
| relayOnColor OBJECT-TYPE The user specified 'On' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.12.1.60 | INTEGER | read-write | mandatory |
| relayOffColor OBJECT-TYPE The user specified 'Off' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.12.1.61 | INTEGER | read-write | mandatory |
| relayAcknowledge OBJECT-TYPE The acknowledge status for the current status of the sensor: 0 = the status has been changed and waiting to be acknowledged, 1 = status is normal or have been already acknowledged, 2 = acknowledge the current status (this status is write-only) | 1.3.6.1.4.1.3854.3.5.12.1.70 | INTEGER {not-acked(0), acked(1), ack(2)} | read-write | mandatory |
| relayId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.12.1.1000 | INTEGER | read-only | mandatory |
| acVoltageTable OBJECT-TYPE This table contains the properties for each AC voltage sensor | 1.3.6.1.4.1.3854.3.5.13 | not-accessible | mandatory | |
| acVoltageEntry OBJECT-TYPE | 1.3.6.1.4.1.3854.3.5.13.1 | not-accessible | mandatory | |
| acVoltageIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.13.1.1 | DisplayString | read-only | mandatory |
| acVoltageDescription OBJECT-TYPE The user specified description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.13.1.2 | DisplayString | read-write | mandatory |
| acVoltageStatus OBJECT-TYPE The current status of this sensor. | 1.3.6.1.4.1.3854.3.5.13.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| acVoltageGoOffline OBJECT-TYPE Command to offline this sensor: use value '2' to set the sensor offline. | 1.3.6.1.4.1.3854.3.5.13.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| acVoltagePort OBJECT-TYPE The device's sensor port number, where this sensor is plugged in to. | 1.3.6.1.4.1.3854.3.5.13.1.35 | INTEGER | read-only | mandatory |
| acVoltageSubPort OBJECT-TYPE The logical port number of this sensor on the array of sensors. | 1.3.6.1.4.1.3854.3.5.13.1.36 | INTEGER | read-only | mandatory |
| acVoltageCriticalDescription OBJECT-TYPE The user specified 'Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.13.1.46 | DisplayString | read-write | mandatory |
| acVoltageNormalDescription OBJECT-TYPE The user specified 'Normal' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.13.1.48 | DisplayString | read-write | mandatory |
| acVoltageCriticalColor OBJECT-TYPE The user specified 'Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.13.1.54 | INTEGER | read-write | mandatory |
| acVoltageNormalColor OBJECT-TYPE The user specified 'Normal' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.13.1.56 | INTEGER | read-write | mandatory |
| acVoltageAcknowledge OBJECT-TYPE The acknowledge status for the current status of the sensor: 0 = the status has been changed and waiting to be acknowledged, 1 = status is normal or have been already acknowledged, 2 = acknowledge the current status (this status is write-only) | 1.3.6.1.4.1.3854.3.5.13.1.70 | INTEGER {not-acked(0), acked(1), ack(2)} | read-write | mandatory |
| acVoltageId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.13.1.1000 | INTEGER | read-only | mandatory |
| smokeTable OBJECT-TYPE This table contains the properties for each smoke sensor | 1.3.6.1.4.1.3854.3.5.14 | not-accessible | mandatory | |
| smokeEntry OBJECT-TYPE | 1.3.6.1.4.1.3854.3.5.14.1 | not-accessible | mandatory | |
| smokeIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.14.1.1 | DisplayString | read-only | mandatory |
| smokeDescription OBJECT-TYPE The user specified description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.14.1.2 | DisplayString | read-write | mandatory |
| smokeStatus OBJECT-TYPE The current status of this sensor. | 1.3.6.1.4.1.3854.3.5.14.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7), relayOn(8), relayOff(9)} | read-only | mandatory |
| smokeGoOffline OBJECT-TYPE Command to offline this sensor: use value '2' to set the sensor offline. | 1.3.6.1.4.1.3854.3.5.14.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| smokePort OBJECT-TYPE The device's sensor port number, where this sensor is plugged in to. | 1.3.6.1.4.1.3854.3.5.14.1.35 | INTEGER | read-only | mandatory |
| smokeSubPort OBJECT-TYPE The logical port number of this sensor in the array, or in a set of sensors. | 1.3.6.1.4.1.3854.3.5.14.1.36 | INTEGER | read-only | mandatory |
| smokeCriticalDescription OBJECT-TYPE The user specified 'Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.14.1.46 | DisplayString | read-write | mandatory |
| smokeNormalDescription OBJECT-TYPE The user specified 'Normal' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.14.1.48 | DisplayString | read-write | mandatory |
| smokeCriticalColor OBJECT-TYPE The user specified 'Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.14.1.54 | INTEGER | read-write | mandatory |
| smokeNormalColor OBJECT-TYPE The user specified 'Normal' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.14.1.56 | INTEGER | read-write | mandatory |
| smokeAcknowledge OBJECT-TYPE The acknowledge status for the current status of the sensor: 0 = the status has been changed and waiting to be acknowledged, 1 = status is normal or have been already acknowledged, 2 = acknowledge the current status (this status is write-only) | 1.3.6.1.4.1.3854.3.5.14.1.70 | INTEGER {not-acked(0), acked(1), ack(2)} | read-write | mandatory |
| smokeId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.14.1.1000 | INTEGER | read-only | mandatory |
| waterRopeTable OBJECT-TYPE This table contains the properties for each water rope sensor | 1.3.6.1.4.1.3854.3.5.21 | not-accessible | mandatory | |
| waterRopeEntry OBJECT-TYPE | 1.3.6.1.4.1.3854.3.5.21.1 | not-accessible | mandatory | |
| waterRopeIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.21.1.1 | DisplayString | read-only | mandatory |
| waterRopeDescription OBJECT-TYPE The user specified description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.21.1.2 | DisplayString | read-write | mandatory |
| waterRopeLeakLocation OBJECT-TYPE Location of leakage from the begining of water rope sensor. | 1.3.6.1.4.1.3854.3.5.21.1.4 | INTEGER | read-only | mandatory |
| waterRopeUnit OBJECT-TYPE The sensor's value unit string, in what the sensor's value is read in. | 1.3.6.1.4.1.3854.3.5.21.1.5 | DisplayString | read-write | mandatory |
| waterRopeStatus OBJECT-TYPE The current status of this sensor. | 1.3.6.1.4.1.3854.3.5.21.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), sensorError(7)} | read-only | mandatory |
| waterRopeGoOffline OBJECT-TYPE Command to offline this sensor: use value '2' to set the sensor offline. | 1.3.6.1.4.1.3854.3.5.21.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| waterRopeRaw OBJECT-TYPE The sensor's unformatted (raw) value that is being read directly from sensor, before it is converted to the preferred value. | 1.3.6.1.4.1.3854.3.5.21.1.20 | INTEGER | read-only | mandatory |
| waterRopeCriticalDescription OBJECT-TYPE The user specified 'Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.21.1.46 | DisplayString | read-write | mandatory |
| waterRopeNormalDescription OBJECT-TYPE The user specified 'Normal' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.21.1.48 | DisplayString | read-write | mandatory |
| waterRopeSensorErrorDescription OBJECT-TYPE The user specified 'Sensor Error' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.21.1.51 | DisplayString | read-write | mandatory |
| waterRopeCriticalColor OBJECT-TYPE The user specified 'Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.21.1.54 | INTEGER | read-write | mandatory |
| waterRopeNormalColor OBJECT-TYPE The user specified 'Normal' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.21.1.56 | INTEGER | read-write | mandatory |
| waterRopeSensorErrorColor OBJECT-TYPE The user specified 'Sensor Error' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.21.1.59 | INTEGER | read-write | mandatory |
| waterRopeAcknowledge OBJECT-TYPE The acknowledge status for the current status of the sensor: 0 = the status has been changed and waiting to be acknowledged, 1 = status is normal or have been already acknowledged, 2 = acknowledge the current status (this status is write-only) | 1.3.6.1.4.1.3854.3.5.21.1.70 | INTEGER {not-acked(0), acked(1), ack(2)} | read-write | mandatory |
| waterRopeLength OBJECT-TYPE Length of water rope sensor. | 1.3.6.1.4.1.3854.3.5.21.1.100 | INTEGER | read-only | mandatory |
| waterRopeImpedance OBJECT-TYPE Sensing wire impedance per meter value times 100 | 1.3.6.1.4.1.3854.3.5.21.1.101 | INTEGER | read-write | mandatory |
| waterRopeType OBJECT-TYPE The type of the sensor; it represents the sensor's functionality. | 1.3.6.1.4.1.3854.3.5.21.1.103 | INTEGER {custom(0), water(1), fuel(2)} | read-write | mandatory |
| waterRopeId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.21.1.1000 | INTEGER | read-only | mandatory |
| powerTable OBJECT-TYPE This table contains the properties for each power sensor | 1.3.6.1.4.1.3854.3.5.22 | not-accessible | mandatory | |
| powerEntry OBJECT-TYPE | 1.3.6.1.4.1.3854.3.5.22.1 | not-accessible | mandatory | |
| powerIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.22.1.1 | DisplayString | read-only | mandatory |
| powerDescription OBJECT-TYPE The user specified description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.22.1.2 | DisplayString | read-write | mandatory |
| powerValue OBJECT-TYPE The value in numerical reading. | 1.3.6.1.4.1.3854.3.5.22.1.4 | INTEGER | read-only | mandatory |
| powerUnit OBJECT-TYPE The sensor's value unit string, in what the sensor's value is read in. | 1.3.6.1.4.1.3854.3.5.22.1.5 | DisplayString | read-only | mandatory |
| powerStatus OBJECT-TYPE The current status of this sensor. | 1.3.6.1.4.1.3854.3.5.22.1.6 | INTEGER {noStatus(1), normal(2), highCritical(4), lowCritical(6), sensorError(7)} | read-only | mandatory |
| powerGoOffline OBJECT-TYPE Command to offline this sensor: use value '2' to set the sensor offline. | 1.3.6.1.4.1.3854.3.5.22.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| powerLowCritical OBJECT-TYPE The user specified 'Low Critical' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.22.1.9 | INTEGER | read-write | mandatory |
| powerLowWarning OBJECT-TYPE The user specified 'Low Warning' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.22.1.10 | INTEGER | read-write | mandatory |
| powerHighWarning OBJECT-TYPE The user specified 'High Warning' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.22.1.11 | INTEGER | read-write | mandatory |
| powerHighCritical OBJECT-TYPE The user specified 'High Critical' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.22.1.12 | INTEGER | read-write | mandatory |
| powerRearm OBJECT-TYPE This value tells how many value the sensor has to reach beyond the threshold value, before changing to a new status. Useful to prevent the quick fluctuation of readings. | 1.3.6.1.4.1.3854.3.5.22.1.13 | INTEGER | read-write | mandatory |
| powerDelayError OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Error' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.22.1.14 | INTEGER (0..65534) | read-write | mandatory |
| powerDelayNormal OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Normal' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.22.1.15 | INTEGER (0..65534) | read-write | mandatory |
| powerDelayLowCritical OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Low Critical' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.22.1.16 | INTEGER (0..65535) | read-write | mandatory |
| powerDelayLowWarning OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Low Warning' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.22.1.17 | INTEGER (0..65535) | read-write | mandatory |
| powerDelayHighWarning OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'High Warning' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.22.1.18 | INTEGER (0..65535) | read-write | mandatory |
| powerDelayHighCritical OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'High Critical' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.22.1.19 | INTEGER (0..65535) | read-write | mandatory |
| powerPort OBJECT-TYPE The device's sensor port number, where this sensor is plugged in to. | 1.3.6.1.4.1.3854.3.5.22.1.35 | INTEGER (0..65534) | read-only | mandatory |
| powerSubPort OBJECT-TYPE The logical port number of this sensor in the array, or in a set of sensors. | 1.3.6.1.4.1.3854.3.5.22.1.36 | INTEGER (0..65534) | read-only | mandatory |
| powerDisplayStyle OBJECT-TYPE The sensor's Display Style for the Web UI, to display the reading as a gauge or bar. 0 = bar style, 1 = gauge style. | 1.3.6.1.4.1.3854.3.5.22.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| powerHighCriticalDescription OBJECT-TYPE The user specified 'High Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.22.1.46 | DisplayString | read-write | mandatory |
| powerLowCriticalDescription OBJECT-TYPE The user specified 'Low Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.22.1.47 | DisplayString | read-write | mandatory |
| powerNormalDescription OBJECT-TYPE The user specified 'Normal' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.22.1.48 | DisplayString | read-write | mandatory |
| powerLowWarningDescription OBJECT-TYPE The user specified 'Low Warning' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.22.1.49 | DisplayString | read-write | mandatory |
| powerHighWarningDescription OBJECT-TYPE The user specified 'High Warning' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.22.1.50 | DisplayString | read-write | mandatory |
| powerSensorErrorDescription OBJECT-TYPE The user specified 'Sensor Error' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.22.1.51 | DisplayString | read-write | mandatory |
| powerHighCriticalColor OBJECT-TYPE The user specified 'High Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.22.1.54 | INTEGER | read-write | mandatory |
| powerLowCriticalColor OBJECT-TYPE The user specified 'Low Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.22.1.55 | INTEGER | read-write | mandatory |
| powerNormalColor OBJECT-TYPE The user specified 'Normal' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.22.1.56 | INTEGER | read-write | mandatory |
| powerLowWarningColor OBJECT-TYPE The user specified 'Low Warning' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.22.1.57 | INTEGER | read-write | mandatory |
| powerHighWarningColor OBJECT-TYPE The user specified 'High Warning' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.22.1.58 | INTEGER | read-write | mandatory |
| powerSensorErrorColor OBJECT-TYPE The user specified 'Sensor Error' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.22.1.59 | INTEGER | read-write | mandatory |
| powerValueFormatString OBJECT-TYPE The string-based reading value in this sensor. | 1.3.6.1.4.1.3854.3.5.22.1.66 | DisplayString | read-only | mandatory |
| powerValueFormatFloat OBJECT-TYPE The floating-point IEEE Standard 754 reading value in this sensor. | 1.3.6.1.4.1.3854.3.5.22.1.67 | Opaque (SIZE(4)) | read-only | mandatory |
| powerAcknowledge OBJECT-TYPE The acknowledge status for the current status of the sensor: 0 = the status has been changed and waiting to be acknowledged, 1 = status is normal or have been already acknowledged, 2 = acknowledge the current status (this status is write-only) | 1.3.6.1.4.1.3854.3.5.22.1.70 | INTEGER {not-acked(0), acked(1), ack(2)} | read-write | mandatory |
| powerId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.22.1.1000 | INTEGER | read-only | mandatory |
| fuelTable OBJECT-TYPE This table contains the properties for each fuel sensor | 1.3.6.1.4.1.3854.3.5.24 | not-accessible | mandatory | |
| fuelEntry OBJECT-TYPE | 1.3.6.1.4.1.3854.3.5.24.1 | not-accessible | mandatory | |
| fuelIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.24.1.1 | DisplayString | read-only | mandatory |
| fuelDescription OBJECT-TYPE The user specified description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.24.1.2 | DisplayString | read-write | mandatory |
| fuelValue OBJECT-TYPE The reading value in this sensor | 1.3.6.1.4.1.3854.3.5.24.1.4 | INTEGER | read-only | mandatory |
| fuelUnit OBJECT-TYPE The sensor's value unit string, in what the sensor's value is read in. | 1.3.6.1.4.1.3854.3.5.24.1.5 | DisplayString | read-write | mandatory |
| fuelStatus OBJECT-TYPE The current status of this sensor. | 1.3.6.1.4.1.3854.3.5.24.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| fuelGoOffline OBJECT-TYPE Command to offline this sensor: use value '2' to set the sensor offline. | 1.3.6.1.4.1.3854.3.5.24.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| fuelLowCritical OBJECT-TYPE The user specified 'Low Critical' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.24.1.9 | INTEGER | read-write | mandatory |
| fuelLowWarning OBJECT-TYPE The user specified 'Low Warning' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.24.1.10 | INTEGER | read-write | mandatory |
| fuelHighWarning OBJECT-TYPE The user specified 'High Warning' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.24.1.11 | INTEGER | read-write | mandatory |
| fuelHighCritical OBJECT-TYPE The user specified 'High Critical' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.24.1.12 | INTEGER | read-write | mandatory |
| fuelRearm OBJECT-TYPE This value tells how many value the sensor has to reach beyond the threshold value, before changing to a new status. Useful to prevent the quick fluctuation of readings. | 1.3.6.1.4.1.3854.3.5.24.1.13 | INTEGER | read-write | mandatory |
| fuelDelayError OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Error' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.24.1.14 | INTEGER | read-write | mandatory |
| fuelDelayNormal OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Normal' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.24.1.15 | INTEGER | read-write | mandatory |
| fuelDelayLowCritical OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Low Critical' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.24.1.16 | INTEGER | read-write | mandatory |
| fuelDelayLowWarning OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Low Warning' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.24.1.17 | INTEGER | read-write | mandatory |
| fuelDelayHighWarning OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'High Warning' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.24.1.18 | INTEGER | read-write | mandatory |
| fuelDelayHighCritical OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'High Critical' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.24.1.19 | INTEGER | read-write | mandatory |
| fuelRaw OBJECT-TYPE The sensor's unformatted (raw) value that is being read directly from sensor, before it is converted to the preferred value. | 1.3.6.1.4.1.3854.3.5.24.1.20 | INTEGER | read-only | mandatory |
| fuelAmountMaxValue OBJECT-TYPE The maximum scale of value conversion. | 1.3.6.1.4.1.3854.3.5.24.1.33 | INTEGER | read-write | mandatory |
| fuelAmountBaseValue OBJECT-TYPE The base scale of value conversion. | 1.3.6.1.4.1.3854.3.5.24.1.34 | INTEGER | read-write | mandatory |
| fuelDisplayStyle OBJECT-TYPE The sensor's Display Style for the Web UI, to display the reading as a gauge or bar. 0 = bar style, 1 = gauge style. | 1.3.6.1.4.1.3854.3.5.24.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| fuelHighCriticalDescription OBJECT-TYPE The user specified 'High Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.24.1.46 | DisplayString | read-write | mandatory |
| fuelLowCriticalDescription OBJECT-TYPE The user specified 'Low Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.24.1.47 | DisplayString | read-write | mandatory |
| fuelNormalDescription OBJECT-TYPE The user specified 'Normal' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.24.1.48 | DisplayString | read-write | mandatory |
| fuelLowWarningDescription OBJECT-TYPE The user specified 'Low Warning' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.24.1.49 | DisplayString | read-write | mandatory |
| fuelHighWarningDescription OBJECT-TYPE The user specified 'High Warning' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.24.1.50 | DisplayString | read-write | mandatory |
| fuelSensorErrorDescription OBJECT-TYPE The user specified 'Sensor Error' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.24.1.51 | DisplayString | read-write | mandatory |
| fuelHighCriticalColor OBJECT-TYPE The user specified 'High Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.24.1.54 | INTEGER | read-write | mandatory |
| fuelLowCriticalColor OBJECT-TYPE The user specified 'Low Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.24.1.55 | INTEGER | read-write | mandatory |
| fuelNormalColor OBJECT-TYPE The user specified 'Normal' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.24.1.56 | INTEGER | read-write | mandatory |
| fuelLowWarningColor OBJECT-TYPE The user specified 'Low Warning' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.24.1.57 | INTEGER | read-write | mandatory |
| fuelHighWarningColor OBJECT-TYPE The user specified 'High Warning' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.24.1.58 | INTEGER | read-write | mandatory |
| fuelSensorErrorColor OBJECT-TYPE The user specified 'Sensor Error' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.24.1.59 | INTEGER | read-write | mandatory |
| fuelAcknowledge OBJECT-TYPE The acknowledge status for the current status of the sensor: 0 = the status has been changed and waiting to be acknowledged, 1 = status is normal or have been already acknowledged, 2 = acknowledge the current status (this status is write-only) | 1.3.6.1.4.1.3854.3.5.24.1.70 | INTEGER {not-acked(0), acked(1), ack(2)} | read-write | mandatory |
| fuelId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.24.1.1000 | INTEGER | read-only | mandatory |
| tankSenderTable OBJECT-TYPE This table contains the property and reading value for every sensor. | 1.3.6.1.4.1.3854.3.5.26 | not-accessible | mandatory | |
| tankSenderEntry OBJECT-TYPE | 1.3.6.1.4.1.3854.3.5.26.1 | not-accessible | mandatory | |
| tankSenderIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.26.1.1 | DisplayString | read-only | mandatory |
| tankSenderDescription OBJECT-TYPE The user specified description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.26.1.2 | DisplayString | read-write | mandatory |
| tankSenderValue OBJECT-TYPE The sensor value in numerical reading. | 1.3.6.1.4.1.3854.3.5.26.1.4 | INTEGER | read-only | mandatory |
| tankSenderUnit OBJECT-TYPE The sensor's value unit string, in what the sensor's value is read in. | 1.3.6.1.4.1.3854.3.5.26.1.5 | DisplayString | read-write | mandatory |
| tankSenderStatus OBJECT-TYPE The current status of this sensor. | 1.3.6.1.4.1.3854.3.5.26.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| tankSenderGoOffline OBJECT-TYPE Command to offline this sensor: use value '2' to set the sensor offline. | 1.3.6.1.4.1.3854.3.5.26.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| tankSenderLowCritical OBJECT-TYPE The user specified 'Low Critical' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.26.1.9 | INTEGER | read-write | mandatory |
| tankSenderLowWarning OBJECT-TYPE The user specified 'Low Warning' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.26.1.10 | INTEGER | read-write | mandatory |
| tankSenderHighWarning OBJECT-TYPE The user specified 'High Warning' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.26.1.11 | INTEGER | read-write | mandatory |
| tankSenderHighCritical OBJECT-TYPE The user specified 'High Critical' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.26.1.12 | INTEGER | read-write | mandatory |
| tankSenderRearm OBJECT-TYPE This value tells how many value the sensor has to reach beyond the threshold value, before changing to a new status. Useful to prevent the quick fluctuation of readings. | 1.3.6.1.4.1.3854.3.5.26.1.13 | INTEGER | read-write | mandatory |
| tankSenderDelayError OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Error' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.26.1.14 | INTEGER | read-write | mandatory |
| tankSenderDelayNormal OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Normal' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.26.1.15 | INTEGER | read-write | mandatory |
| tankSenderDelayLowCritical OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Low Critical' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.26.1.16 | INTEGER | read-write | mandatory |
| tankSenderDelayLowWarning OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Low Warning' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.26.1.17 | INTEGER | read-write | mandatory |
| tankSenderDelayHighWarning OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'High Warning' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.26.1.18 | INTEGER | read-write | mandatory |
| tankSenderDelayHighCritical OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'High Critical' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.26.1.19 | INTEGER | read-write | mandatory |
| tankSenderRaw OBJECT-TYPE The sensor's unformatted (raw) value that is being read directly from sensor, before it is converted to the preferred value. | 1.3.6.1.4.1.3854.3.5.26.1.20 | INTEGER | read-only | mandatory |
| tankSenderDisplayStyle OBJECT-TYPE The sensor's Display Style for the Web UI, to display the reading as a gauge or bar. 0 = bar style, 1 = gauge style. | 1.3.6.1.4.1.3854.3.5.26.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| tankSenderHighCriticalDescription OBJECT-TYPE The user specified 'High Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.26.1.46 | DisplayString | read-write | mandatory |
| tankSenderLowCriticalDescription OBJECT-TYPE The user specified 'Low Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.26.1.47 | DisplayString | read-write | mandatory |
| tankSenderNormalDescription OBJECT-TYPE The user specified 'Normal' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.26.1.48 | DisplayString | read-write | mandatory |
| tankSenderLowWarningDescription OBJECT-TYPE The user specified 'Low Warning' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.26.1.49 | DisplayString | read-write | mandatory |
| tankSenderHighWarningDescription OBJECT-TYPE The user specified 'High Warning' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.26.1.50 | DisplayString | read-write | mandatory |
| tankSenderSensorErrorDescription OBJECT-TYPE The user specified 'Sensor Error' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.26.1.51 | DisplayString | read-write | mandatory |
| tankSenderHighCriticalColor OBJECT-TYPE The user specified 'High Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.26.1.54 | INTEGER | read-write | mandatory |
| tankSenderLowCriticalColor OBJECT-TYPE The user specified 'Low Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.26.1.55 | INTEGER | read-write | mandatory |
| tankSenderNormalColor OBJECT-TYPE The user specified 'Normal' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.26.1.56 | INTEGER | read-write | mandatory |
| tankSenderLowWarningColor OBJECT-TYPE The user specified 'Low Warning' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.26.1.57 | INTEGER | read-write | mandatory |
| tankSenderHighWarningColor OBJECT-TYPE The user specified 'High Warning' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.26.1.58 | INTEGER | read-write | mandatory |
| tankSenderSensorErrorColor OBJECT-TYPE The user specified 'Sensor Error' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.26.1.59 | INTEGER | read-write | mandatory |
| tankSenderAcknowledge OBJECT-TYPE The acknowledge status for the current status of the sensor: 0 = the status has been changed and waiting to be acknowledged, 1 = status is normal or have been already acknowledged, 2 = acknowledge the current status (this status is write-only) | 1.3.6.1.4.1.3854.3.5.26.1.70 | INTEGER {not-acked(0), acked(1), ack(2)} | read-write | mandatory |
| tankSenderId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.26.1.1000 | INTEGER | read-only | mandatory |
| doorTable OBJECT-TYPE This table contains the properties for each door sensor | 1.3.6.1.4.1.3854.3.5.27 | not-accessible | mandatory | |
| doorEntry OBJECT-TYPE | 1.3.6.1.4.1.3854.3.5.27.1 | not-accessible | mandatory | |
| doorIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.27.1.1 | DisplayString | read-only | mandatory |
| doorDescription OBJECT-TYPE The user specified description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.27.1.2 | DisplayString | read-write | mandatory |
| doorValue OBJECT-TYPE The reading value for this sensor. It will be used to calculate the sensor status. | 1.3.6.1.4.1.3854.3.5.27.1.4 | INTEGER | read-only | mandatory |
| doorStatus OBJECT-TYPE The current status of this sensor. | 1.3.6.1.4.1.3854.3.5.27.1.6 | INTEGER {noStatus(1), closed(2), heldOpen(3), fire(4), opened(5), forceOpened(6), sensorError(7)} | read-only | mandatory |
| doorUnlockPeriod OBJECT-TYPE The time in seconds for the door to stay unlocked before it is automatically locked again. | 1.3.6.1.4.1.3854.3.5.27.1.62 | INTEGER | read-write | mandatory |
| doorOpenPeriod OBJECT-TYPE The time in seconds for the door to stay in the 'Open' status before it sends the alert 'Door is held open'. | 1.3.6.1.4.1.3854.3.5.27.1.63 | INTEGER | read-write | mandatory |
| doorCmd OBJECT-TYPE The Door Sensor's command, used to open/close the door. | 1.3.6.1.4.1.3854.3.5.27.1.64 | INTEGER {none(0), trig-open(1), trig-close(2)} | write-only | mandatory |
| doorAcknowledge OBJECT-TYPE The acknowledge status for the current status of the sensor: 0 = the status has been changed and waiting to be acknowledged, 1 = status is normal or have been already acknowledged, 2 = acknowledge the current status (this status is write-only) | 1.3.6.1.4.1.3854.3.5.27.1.70 | INTEGER {not-acked(0), acked(1), ack(2)} | read-write | mandatory |
| doorId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.27.1.1000 | INTEGER | read-only | mandatory |
| temperatureArrayTable OBJECT-TYPE This table contains the properties for each temperature array sensor | 1.3.6.1.4.1.3854.3.5.28 | not-accessible | mandatory | |
| temperatureArrayEntry OBJECT-TYPE | 1.3.6.1.4.1.3854.3.5.28.1 | not-accessible | mandatory | |
| temperatureArrayIndex OBJECT-TYPE The Sensor Compound ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.28.1.1 | DisplayString | read-only | mandatory |
| temperatureArrayDescription OBJECT-TYPE The user specified description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.28.1.2 | DisplayString | read-write | mandatory |
| temperatureArrayType OBJECT-TYPE The type of the sensor; it represents the sensor's functionality. For the temperature sensor, it has 3 sub-types: Normal temperature sensor, One-wire temperature sensor, and Thermocouple sensor. | 1.3.6.1.4.1.3854.3.5.28.1.3 | INTEGER {temperature(1), thermocouple(20), arraytemp(23)} | read-only | mandatory |
| temperatureArrayDegree OBJECT-TYPE The temperature degree value in numerical reading. | 1.3.6.1.4.1.3854.3.5.28.1.4 | INTEGER | read-only | mandatory |
| temperatureArrayUnit OBJECT-TYPE The sensor's value unit string, in what the sensor's value is read in. For the temperature sensor it can be Celsius or Fahrenheit. | 1.3.6.1.4.1.3854.3.5.28.1.5 | DisplayString | read-write | mandatory |
| temperatureArrayStatus OBJECT-TYPE The current status of this sensor. | 1.3.6.1.4.1.3854.3.5.28.1.6 | INTEGER {noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)} | read-only | mandatory |
| temperatureArrayGoOffline OBJECT-TYPE Command to offline this sensor: use value '2' to set the sensor offline. | 1.3.6.1.4.1.3854.3.5.28.1.8 | INTEGER {online(1), goOffline(2)} | read-write | mandatory |
| temperatureArrayLowCritical OBJECT-TYPE The user specified 'Low Critical' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.28.1.9 | INTEGER | read-write | mandatory |
| temperatureArrayLowWarning OBJECT-TYPE The user specified 'Low Warning' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.28.1.10 | INTEGER | read-write | mandatory |
| temperatureArrayHighWarning OBJECT-TYPE The user specified 'High Warning' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.28.1.11 | INTEGER | read-write | mandatory |
| temperatureArrayHighCritical OBJECT-TYPE The user specified 'High Critical' value of this sensor. The unit will check the current reading against this value, and send an alert if it's configured. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.28.1.12 | INTEGER | read-write | mandatory |
| temperatureArrayRearm OBJECT-TYPE This value tells how many degrees the sensor has to reach beyond the threshold value, before changing to a new status. Useful to prevent the quick fluctuation of readings. | 1.3.6.1.4.1.3854.3.5.28.1.13 | INTEGER | read-write | mandatory |
| temperatureArrayDelayError OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Error' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.28.1.14 | INTEGER | read-write | mandatory |
| temperatureArrayDelayNormal OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Normal' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.28.1.15 | INTEGER | read-write | mandatory |
| temperatureArrayDelayLowCritical OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Low Critical' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.28.1.16 | INTEGER | read-write | mandatory |
| temperatureArrayDelayLowWarning OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'Low Warning' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.28.1.17 | INTEGER | read-write | mandatory |
| temperatureArrayDelayHighWarning OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'High Warning' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.28.1.18 | INTEGER | read-write | mandatory |
| temperatureArrayDelayHighCritical OBJECT-TYPE The time in seconds (continuous time) that the sensor has to be in 'High Critical' status before its status is changed. | 1.3.6.1.4.1.3854.3.5.28.1.19 | INTEGER | read-write | mandatory |
| temperatureArrayRaw OBJECT-TYPE The sensor's unformatted (raw) value that is being read directly from sensor, before it is converted to the preferred value. | 1.3.6.1.4.1.3854.3.5.28.1.20 | INTEGER | read-only | mandatory |
| temperatureArrayOffset OBJECT-TYPE The offset value for this sensor. It's used to adjust the reading value in case the reading is incorrect. | 1.3.6.1.4.1.3854.3.5.28.1.21 | INTEGER | read-write | mandatory |
| temperatureArrayPort OBJECT-TYPE The device's sensor port number, where this sensor is plugged in to. | 1.3.6.1.4.1.3854.3.5.28.1.35 | INTEGER | read-only | mandatory |
| temperatureArraySubPort OBJECT-TYPE The logical port number of this sensor in the array, or in a set of sensors. For Temperature Sensor, it's for the array of Temperature Sensors and Dual Sensors. For example x.1, x.2, x.3 ... | 1.3.6.1.4.1.3854.3.5.28.1.36 | INTEGER | read-only | mandatory |
| temperatureArrayDisplayStyle OBJECT-TYPE The sensor's Display Style for the Web UI, to display the reading as a gauge or bar. 0 = bar style, 1 = gauge style. | 1.3.6.1.4.1.3854.3.5.28.1.45 | INTEGER {basic(0), gauge(1)} | read-write | mandatory |
| temperatureArrayHighCriticalDescription OBJECT-TYPE The user specified 'High Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.28.1.46 | DisplayString | read-write | mandatory |
| temperatureArrayLowCriticalDescription OBJECT-TYPE The user specified 'Low Critical' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.28.1.47 | DisplayString | read-write | mandatory |
| temperatureArraySensorNormalDescription OBJECT-TYPE The user specified 'Normal' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.28.1.48 | DisplayString | read-write | mandatory |
| temperatureArrayLowWarningDescription OBJECT-TYPE The user specified 'Low Warning' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.28.1.49 | DisplayString | read-write | mandatory |
| temperatureArrayHighWarningDescription OBJECT-TYPE The user specified 'High Warning' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.28.1.50 | DisplayString | read-write | mandatory |
| temperatureArraySensorErrorDescription OBJECT-TYPE The user specified 'Sensor Error' status description of this sensor. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.28.1.51 | DisplayString | read-write | mandatory |
| temperatureArrayHighCriticalColor OBJECT-TYPE The user specified 'High Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.28.1.54 | INTEGER | read-write | mandatory |
| temperatureArrayLowCriticalColor OBJECT-TYPE The user specified 'Low Critical' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.28.1.55 | INTEGER | read-write | mandatory |
| temperatureArraySensorNormalColor OBJECT-TYPE The user specified 'Normal' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.28.1.56 | INTEGER | read-write | mandatory |
| temperatureArrayLowWarningColor OBJECT-TYPE The user specified 'Low Warning' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.28.1.57 | INTEGER | read-write | mandatory |
| temperatureArrayHighWarningColor OBJECT-TYPE The user specified 'High Warning' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.28.1.58 | INTEGER | read-write | mandatory |
| temperatureArraySensorErrorColor OBJECT-TYPE The user specified 'Sensor Error' status field color. The unit will show this color on its web interface and in DCIM. Unless specified, the default value is used. | 1.3.6.1.4.1.3854.3.5.28.1.59 | INTEGER | read-write | mandatory |
| temperatureArrayAcknowledge OBJECT-TYPE The acknowledge status for the current status of the sensor: 0 = the status has been changed and waiting to be acknowledged, 1 = status is normal or have been already acknowledged, 2 = acknowledge the current status (this status is write-only) | 1.3.6.1.4.1.3854.3.5.28.1.70 | INTEGER {not-acked(0), acked(1), ack(2)} | read-write | mandatory |
| temperatureArraySerialNumber OBJECT-TYPE The serial number of temperature sensor, used to indicate which sensor it is in an array. It matches the MAC ID of the sensor for a DCT sensor array. | 1.3.6.1.4.1.3854.3.5.28.1.71 | DisplayString | read-write | mandatory |
| temperatureArrayId OBJECT-TYPE The Sensor ID of this sensor, used to identify which sensor it is in the system configuration. | 1.3.6.1.4.1.3854.3.5.28.1.1000 | INTEGER | read-only | mandatory |
| virtual OBJECT-IDENTITY | 1.3.6.1.4.1.3854.3.6 |
Notifications
| Name | OID | Status |
|---|---|---|
| spNormalStatus NOTIFICATION-TYPE sensorProbe status is Normal | 1.3.6.1.4.1.3854.1.0.1 | |
| spWarningStatus NOTIFICATION-TYPE sensorProbe status went to Warning | 1.3.6.1.4.1.3854.1.0.2 | |
| spCriticalStatus NOTIFICATION-TYPE sensorProbe status went to Critical | 1.3.6.1.4.1.3854.1.0.3 | |
| spDownStatus NOTIFICATION-TYPE sensorProbe status went to Disabled | 1.3.6.1.4.1.3854.1.0.4 | |
| spKeepAliveTrap NOTIFICATION-TYPE sensorProbe send keep alive trap. | 1.3.6.1.4.1.3854.1.0.5 | |
| spUnknownStatus NOTIFICATION-TYPE sensorProbe status went to Unknown | 1.3.6.1.4.1.3854.1.0.7 | |
| spTemperatureStatus NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.10 | |
| spTemperatureArray1Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.11 | |
| spTemperatureArray2Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.12 | |
| spTemperatureArray3Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.13 | |
| spTemperatureArray4Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.14 | |
| spTemperatureArray5Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.15 | |
| spTemperatureArray6Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.16 | |
| spTemperatureArray7Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.17 | |
| spTemperatureArray8Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.18 | |
| spAnalogueStatus NOTIFICATION-TYPE Analogue Sensor Type | 1.3.6.1.4.1.3854.1.0.20 | |
| spSwitchStatus NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.30 | |
| spIRMSStatus NOTIFICATION-TYPE IRMS sensor trap | 1.3.6.1.4.1.3854.1.0.40 | |
| spVRMSStatus NOTIFICATION-TYPE VRMS sensor trap | 1.3.6.1.4.1.3854.1.0.50 | |
| spSenUnknownStatus NOTIFICATION-TYPE sensorProbe sensor status went to Unknown | 1.3.6.1.4.1.3854.1.0.51 | |
| spSenNormalStatus NOTIFICATION-TYPE sensorProbe sensor status is Normal | 1.3.6.1.4.1.3854.1.0.52 | |
| spSenWarningStatus NOTIFICATION-TYPE sensorProbe sensor status went to Warning | 1.3.6.1.4.1.3854.1.0.53 | |
| spSenCriticalStatus NOTIFICATION-TYPE sensorProbe sensor status went to Critical | 1.3.6.1.4.1.3854.1.0.54 | |
| spSenDownStatus NOTIFICATION-TYPE sensorProbe sensor status went to Disabled | 1.3.6.1.4.1.3854.1.0.55 | |
| spWattStatus NOTIFICATION-TYPE Energy sensor trap | 1.3.6.1.4.1.3854.1.0.60 | |
| spRelayArray1Status NOTIFICATION-TYPE RelayArray1 sensor trap | 1.3.6.1.4.1.3854.1.0.71 | |
| spRelayArray2Status NOTIFICATION-TYPE RelayArray2 sensor trap | 1.3.6.1.4.1.3854.1.0.72 | |
| spRelayArray3Status NOTIFICATION-TYPE RelayArray3 sensor trap | 1.3.6.1.4.1.3854.1.0.73 | |
| spRelayArray4Status NOTIFICATION-TYPE RelayArray4 sensor trap | 1.3.6.1.4.1.3854.1.0.74 | |
| spRelayArray5Status NOTIFICATION-TYPE RelayArray5 sensor trap | 1.3.6.1.4.1.3854.1.0.75 | |
| spRelayArray6Status NOTIFICATION-TYPE RelayArray6 sensor trap | 1.3.6.1.4.1.3854.1.0.77 | |
| spRelayArray8Status NOTIFICATION-TYPE RelayArray8 sensor trap | 1.3.6.1.4.1.3854.1.0.78 | |
| spVirtualStatus NOTIFICATION-TYPE Virtual sensor trap | 1.3.6.1.4.1.3854.1.0.80 | |
| spTemperature1Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.101 | |
| spTemperature2Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.102 | |
| spTemperature3Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.103 | |
| spTemperature4Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.104 | |
| spTemperature5Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.105 | |
| spTemperature6Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.106 | |
| spTemperature7Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.107 | |
| spTemperature8Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.108 | |
| spTemperatureArray1_1Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.111 | |
| spTemperatureArray1_2Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.112 | |
| spTemperatureArray1_3Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.113 | |
| spTemperatureArray1_4Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.114 | |
| spTemperatureArray1_5Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.115 | |
| spTemperatureArray1_6Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.116 | |
| spTemperatureArray1_7Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.117 | |
| spTemperatureArray1_8Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.118 | |
| spTemperatureArray2_1Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.121 | |
| spTemperatureArray2_2Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.122 | |
| spTemperatureArray2_3Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.123 | |
| spTemperatureArray2_4Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.124 | |
| spTemperatureArray2_5Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.125 | |
| spTemperatureArray2_6Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.126 | |
| spTemperatureArray2_7Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.127 | |
| spTemperatureArray2_8Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.128 | |
| spTemperatureArray3_1Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.131 | |
| spTemperatureArray3_2Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.132 | |
| spTemperatureArray3_3Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.133 | |
| spTemperatureArray3_4Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.134 | |
| spTemperatureArray3_5Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.135 | |
| spTemperatureArray3_6Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.136 | |
| spTemperatureArray3_7Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.137 | |
| spTemperatureArray3_8Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.138 | |
| spTemperatureArray4_1Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.141 | |
| spTemperatureArray4_2Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.142 | |
| spTemperatureArray4_3Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.143 | |
| spTemperatureArray4_4Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.144 | |
| spTemperatureArray4_5Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.145 | |
| spTemperatureArray4_6Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.146 | |
| spTemperatureArray4_7Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.147 | |
| spTemperatureArray4_8Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.148 | |
| spTemperatureArray5_1Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.151 | |
| spTemperatureArray5_2Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.152 | |
| spTemperatureArray5_3Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.153 | |
| spTemperatureArray5_4Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.154 | |
| spTemperatureArray5_5Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.155 | |
| spTemperatureArray5_6Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.156 | |
| spTemperatureArray5_7Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.157 | |
| spTemperatureArray5_8Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.158 | |
| spTemperatureArray6_1Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.161 | |
| spTemperatureArray6_2Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.162 | |
| spTemperatureArray6_3Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.163 | |
| spTemperatureArray6_4Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.164 | |
| spTemperatureArray6_5Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.165 | |
| spTemperatureArray6_6Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.166 | |
| spTemperatureArray6_7Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.167 | |
| spTemperatureArray6_8Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.168 | |
| spTemperatureArray7_1Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.171 | |
| spTemperatureArray7_2Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.172 | |
| spTemperatureArray7_3Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.173 | |
| spTemperatureArray7_4Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.174 | |
| spTemperatureArray7_5Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.175 | |
| spTemperatureArray7_6Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.176 | |
| spTemperatureArray7_7Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.177 | |
| spTemperatureArray7_8Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.178 | |
| spTemperatureArray8_1Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.181 | |
| spTemperatureArray8_2Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.182 | |
| spTemperatureArray8_3Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.183 | |
| spTemperatureArray8_4Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.184 | |
| spTemperatureArray8_5Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.185 | |
| spTemperatureArray8_6Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.186 | |
| spTemperatureArray8_7Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.187 | |
| spTemperatureArray8_8Status NOTIFICATION-TYPE Temperature sensor trap | 1.3.6.1.4.1.3854.1.0.188 | |
| spAnalogue1Status NOTIFICATION-TYPE Analogue Sensor Type | 1.3.6.1.4.1.3854.1.0.201 | |
| spAnalogue2Status NOTIFICATION-TYPE Analogue Sensor Type | 1.3.6.1.4.1.3854.1.0.202 | |
| spAnalogue3Status NOTIFICATION-TYPE Analogue Sensor Type | 1.3.6.1.4.1.3854.1.0.203 | |
| spAnalogue4Status NOTIFICATION-TYPE Analogue Sensor Type | 1.3.6.1.4.1.3854.1.0.204 | |
| spAnalogue5Status NOTIFICATION-TYPE Analogue Sensor Type | 1.3.6.1.4.1.3854.1.0.205 | |
| spAnalogue6Status NOTIFICATION-TYPE Analogue Sensor Type | 1.3.6.1.4.1.3854.1.0.206 | |
| spAnalogue7Status NOTIFICATION-TYPE Analogue Sensor Type | 1.3.6.1.4.1.3854.1.0.207 | |
| spAnalogue8Status NOTIFICATION-TYPE Analogue Sensor Type | 1.3.6.1.4.1.3854.1.0.208 | |
| spSwitch1Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.301 | |
| spSwitch2Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.302 | |
| spSwitch3Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.303 | |
| spSwitch4Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.304 | |
| spSwitch5Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.305 | |
| spSwitch6Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.306 | |
| spSwitch7Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.307 | |
| spSwitch8Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.308 | |
| spSwitch9Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.309 | |
| spSwitch10Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.310 | |
| spSwitch11Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.311 | |
| spSwitch12Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.312 | |
| spSwitch13Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.313 | |
| spSwitch14Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.314 | |
| spSwitch15Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.315 | |
| spSwitch16Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.316 | |
| spSwitch17Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.317 | |
| spSwitch18Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.318 | |
| spSwitch19Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.319 | |
| spSwitch20Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.320 | |
| spSwitch21Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.321 | |
| spSwitch22Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.322 | |
| spSwitch23Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.323 | |
| spSwitch24Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.324 | |
| spSwitch25Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.325 | |
| spSwitch26Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.326 | |
| spSwitch27Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.327 | |
| spSwitch28Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.328 | |
| spSwitch29Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.329 | |
| spSwitch30Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.330 | |
| spSwitch31Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.331 | |
| spSwitch32Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.332 | |
| spSwitch33Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.333 | |
| spSwitch34Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.334 | |
| spSwitch35Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.335 | |
| spSwitch36Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.336 | |
| spSwitch37Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.337 | |
| spSwitch38Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.338 | |
| spSwitch39Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.339 | |
| spSwitch40Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.340 | |
| spSwitch41Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.341 | |
| spSwitch42Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.342 | |
| spSwitch43Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.343 | |
| spSwitch44Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.344 | |
| spSwitch45Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.345 | |
| spSwitch46Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.346 | |
| spSwitch47Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.347 | |
| spSwitch48Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.348 | |
| spSwitch49Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.349 | |
| spSwitch50Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.350 | |
| spSwitch51Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.351 | |
| spSwitch52Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.352 | |
| spSwitch53Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.353 | |
| spSwitch54Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.354 | |
| spSwitch55Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.355 | |
| spSwitch56Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.356 | |
| spSwitch57Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.357 | |
| spSwitch58Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.358 | |
| spSwitch59Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.359 | |
| spSwitch60Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.360 | |
| spSwitch61Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.361 | |
| spSwitch62Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.362 | |
| spSwitch63Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.363 | |
| spSwitch64Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.364 | |
| spSwitch65Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.365 | |
| spSwitch66Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.366 | |
| spSwitch67Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.367 | |
| spSwitch68Status NOTIFICATION-TYPE Switch sensor trap | 1.3.6.1.4.1.3854.1.0.368 | |
| spIRMS1Status NOTIFICATION-TYPE IRMS sensor trap | 1.3.6.1.4.1.3854.1.0.401 | |
| spIRMS2Status NOTIFICATION-TYPE IRMS sensor trap | 1.3.6.1.4.1.3854.1.0.402 | |
| spIRMS3Status NOTIFICATION-TYPE IRMS sensor trap | 1.3.6.1.4.1.3854.1.0.403 | |
| spIRMS4Status NOTIFICATION-TYPE IRMS sensor trap | 1.3.6.1.4.1.3854.1.0.404 | |
| spIRMS5Status NOTIFICATION-TYPE IRMS sensor trap | 1.3.6.1.4.1.3854.1.0.405 | |
| spIRMS6Status NOTIFICATION-TYPE IRMS sensor trap | 1.3.6.1.4.1.3854.1.0.406 | |
| spIRMS7Status NOTIFICATION-TYPE IRMS sensor trap | 1.3.6.1.4.1.3854.1.0.407 | |
| spIRMS8Status NOTIFICATION-TYPE IRMS sensor trap | 1.3.6.1.4.1.3854.1.0.408 | |
| spVRMS1Status NOTIFICATION-TYPE VRMS sensor trap | 1.3.6.1.4.1.3854.1.0.501 | |
| spVRMS2Status NOTIFICATION-TYPE VRMS sensor trap | 1.3.6.1.4.1.3854.1.0.502 | |
| spVRMS3Status NOTIFICATION-TYPE VRMS sensor trap | 1.3.6.1.4.1.3854.1.0.503 | |
| spVRMS4Status NOTIFICATION-TYPE VRMS sensor trap | 1.3.6.1.4.1.3854.1.0.504 | |
| spVRMS5Status NOTIFICATION-TYPE VRMS sensor trap | 1.3.6.1.4.1.3854.1.0.505 | |
| spVRMS6Status NOTIFICATION-TYPE VRMS sensor trap | 1.3.6.1.4.1.3854.1.0.506 | |
| spVRMS7Status NOTIFICATION-TYPE VRMS sensor trap | 1.3.6.1.4.1.3854.1.0.507 | |
| spVRMS8Status NOTIFICATION-TYPE VRMS sensor trap | 1.3.6.1.4.1.3854.1.0.508 | |
| spEnergy1Status NOTIFICATION-TYPE Energy sensor trap | 1.3.6.1.4.1.3854.1.0.601 | |
| spEnergy2Status NOTIFICATION-TYPE Energy sensor trap | 1.3.6.1.4.1.3854.1.0.602 | |
| spEnergy3Status NOTIFICATION-TYPE Energy sensor trap | 1.3.6.1.4.1.3854.1.0.603 | |
| spEnergy4Status NOTIFICATION-TYPE Energy sensor trap | 1.3.6.1.4.1.3854.1.0.604 | |
| spEnergy5Status NOTIFICATION-TYPE Energy sensor trap | 1.3.6.1.4.1.3854.1.0.605 | |
| spEnergy6Status NOTIFICATION-TYPE Energy sensor trap | 1.3.6.1.4.1.3854.1.0.606 | |
| spEnergy7Status NOTIFICATION-TYPE Energy sensor trap | 1.3.6.1.4.1.3854.1.0.607 | |
| spEnergy8Status NOTIFICATION-TYPE Energy sensor trap | 1.3.6.1.4.1.3854.1.0.608 | |
| spRelayArray1_1Status NOTIFICATION-TYPE RelayArray1.1 sensor trap | 1.3.6.1.4.1.3854.1.0.711 | |
| spRelayArray1_2Status NOTIFICATION-TYPE RelayArray1.2 sensor trap | 1.3.6.1.4.1.3854.1.0.712 | |
| spRelayArray1_3Status NOTIFICATION-TYPE RelayArray1.3 sensor trap | 1.3.6.1.4.1.3854.1.0.713 | |
| spRelayArray1_4Status NOTIFICATION-TYPE RelayArray1.4 sensor trap | 1.3.6.1.4.1.3854.1.0.714 | |
| spRelayArray1_5Status NOTIFICATION-TYPE RelayArray1.5 sensor trap | 1.3.6.1.4.1.3854.1.0.715 | |
| spRelayArray1_6Status NOTIFICATION-TYPE RelayArray1.6 sensor trap | 1.3.6.1.4.1.3854.1.0.716 | |
| spRelayArray1_7Status NOTIFICATION-TYPE RelayArray1.7 sensor trap | 1.3.6.1.4.1.3854.1.0.717 | |
| spRelayArray1_8Status NOTIFICATION-TYPE RelayArray1.8 sensor trap | 1.3.6.1.4.1.3854.1.0.718 | |
| spRelayArray2_1Status NOTIFICATION-TYPE RelayArray2.1 sensor trap | 1.3.6.1.4.1.3854.1.0.721 | |
| spRelayArray2_2Status NOTIFICATION-TYPE RelayArray2.2 sensor trap | 1.3.6.1.4.1.3854.1.0.722 | |
| spRelayArray2_3Status NOTIFICATION-TYPE RelayArray2.3 sensor trap | 1.3.6.1.4.1.3854.1.0.723 | |
| spRelayArray2_4Status NOTIFICATION-TYPE RelayArray2.4 sensor trap | 1.3.6.1.4.1.3854.1.0.724 | |
| spRelayArray2_5Status NOTIFICATION-TYPE RelayArray2.5 sensor trap | 1.3.6.1.4.1.3854.1.0.725 | |
| spRelayArray2_6Status NOTIFICATION-TYPE RelayArray2.6 sensor trap | 1.3.6.1.4.1.3854.1.0.726 | |
| spRelayArray2_7Status NOTIFICATION-TYPE RelayArray2.7 sensor trap | 1.3.6.1.4.1.3854.1.0.727 | |
| spRelayArray2_8Status NOTIFICATION-TYPE RelayArray2.8 sensor trap | 1.3.6.1.4.1.3854.1.0.728 | |
| spRelayArray3_1Status NOTIFICATION-TYPE RelayArray3.1 sensor trap | 1.3.6.1.4.1.3854.1.0.731 | |
| spRelayArray3_2Status NOTIFICATION-TYPE RelayArray3.2 sensor trap | 1.3.6.1.4.1.3854.1.0.732 | |
| spRelayArray3_3Status NOTIFICATION-TYPE RelayArray3.3 sensor trap | 1.3.6.1.4.1.3854.1.0.733 | |
| spRelayArray3_4Status NOTIFICATION-TYPE RelayArray3.4 sensor trap | 1.3.6.1.4.1.3854.1.0.734 | |
| spRelayArray3_5Status NOTIFICATION-TYPE RelayArray3.5 sensor trap | 1.3.6.1.4.1.3854.1.0.735 | |
| spRelayArray3_6Status NOTIFICATION-TYPE RelayArray3.6 sensor trap | 1.3.6.1.4.1.3854.1.0.736 | |
| spRelayArray3_7Status NOTIFICATION-TYPE RelayArray3.7 sensor trap | 1.3.6.1.4.1.3854.1.0.737 | |
| spRelayArray3_8Status NOTIFICATION-TYPE RelayArray3.8 sensor trap | 1.3.6.1.4.1.3854.1.0.738 | |
| spRelayArray4_1Status NOTIFICATION-TYPE RelayArray4.1 sensor trap | 1.3.6.1.4.1.3854.1.0.741 | |
| spRelayArray4_2Status NOTIFICATION-TYPE RelayArray4.2 sensor trap | 1.3.6.1.4.1.3854.1.0.742 | |
| spRelayArray4_3Status NOTIFICATION-TYPE RelayArray4.3 sensor trap | 1.3.6.1.4.1.3854.1.0.743 | |
| spRelayArray4_4Status NOTIFICATION-TYPE RelayArray4.4 sensor trap | 1.3.6.1.4.1.3854.1.0.744 | |
| spRelayArray4_5Status NOTIFICATION-TYPE RelayArray4.5 sensor trap | 1.3.6.1.4.1.3854.1.0.745 | |
| spRelayArray4_6Status NOTIFICATION-TYPE RelayArray4.6 sensor trap | 1.3.6.1.4.1.3854.1.0.746 | |
| spRelayArray4_7Status NOTIFICATION-TYPE RelayArray4.7 sensor trap | 1.3.6.1.4.1.3854.1.0.747 | |
| spRelayArray4_8Status NOTIFICATION-TYPE RelayArray4.8 sensor trap | 1.3.6.1.4.1.3854.1.0.748 | |
| spRelayArray5_1Status NOTIFICATION-TYPE RelayArray5.1 sensor trap | 1.3.6.1.4.1.3854.1.0.751 | |
| spRelayArray5_2Status NOTIFICATION-TYPE RelayArray5.2 sensor trap | 1.3.6.1.4.1.3854.1.0.752 | |
| spRelayArray5_3Status NOTIFICATION-TYPE RelayArray5.3 sensor trap | 1.3.6.1.4.1.3854.1.0.753 | |
| spRelayArray5_4Status NOTIFICATION-TYPE RelayArray5.4 sensor trap | 1.3.6.1.4.1.3854.1.0.754 | |
| spRelayArray5_5Status NOTIFICATION-TYPE RelayArray5.5 sensor trap | 1.3.6.1.4.1.3854.1.0.755 | |
| spRelayArray5_6Status NOTIFICATION-TYPE RelayArray5.6 sensor trap | 1.3.6.1.4.1.3854.1.0.756 | |
| spRelayArray5_7Status NOTIFICATION-TYPE RelayArray5.7 sensor trap | 1.3.6.1.4.1.3854.1.0.757 | |
| spRelayArray5_8Status NOTIFICATION-TYPE RelayArray5.8 sensor trap | 1.3.6.1.4.1.3854.1.0.758 | |
| spRelayArray6_1Status NOTIFICATION-TYPE RelayArray6.1 sensor trap | 1.3.6.1.4.1.3854.1.0.761 | |
| spRelayArray6_2Status NOTIFICATION-TYPE RelayArray6.2 sensor trap | 1.3.6.1.4.1.3854.1.0.762 | |
| spRelayArray6_3Status NOTIFICATION-TYPE RelayArray6.3 sensor trap | 1.3.6.1.4.1.3854.1.0.763 | |
| spRelayArray6_4Status NOTIFICATION-TYPE RelayArray6.4 sensor trap | 1.3.6.1.4.1.3854.1.0.764 | |
| spRelayArray6_5Status NOTIFICATION-TYPE RelayArray6.5 sensor trap | 1.3.6.1.4.1.3854.1.0.765 | |
| spRelayArray6_6Status NOTIFICATION-TYPE RelayArray6.6 sensor trap | 1.3.6.1.4.1.3854.1.0.766 | |
| spRelayArray6_7Status NOTIFICATION-TYPE RelayArray6.7 sensor trap | 1.3.6.1.4.1.3854.1.0.767 | |
| spRelayArray6_8Status NOTIFICATION-TYPE RelayArray6.8 sensor trap | 1.3.6.1.4.1.3854.1.0.768 | |
| spRelayArray7_1Status NOTIFICATION-TYPE RelayArray7.1 sensor trap | 1.3.6.1.4.1.3854.1.0.771 | |
| spRelayArray7_2Status NOTIFICATION-TYPE RelayArray7.2 sensor trap | 1.3.6.1.4.1.3854.1.0.772 | |
| spRelayArray7_3Status NOTIFICATION-TYPE RelayArray7.3 sensor trap | 1.3.6.1.4.1.3854.1.0.773 | |
| spRelayArray7_4Status NOTIFICATION-TYPE RelayArray7.4 sensor trap | 1.3.6.1.4.1.3854.1.0.774 | |
| spRelayArray7_5Status NOTIFICATION-TYPE RelayArray7.5 sensor trap | 1.3.6.1.4.1.3854.1.0.775 | |
| spRelayArray7_6Status NOTIFICATION-TYPE RelayArray7.6 sensor trap | 1.3.6.1.4.1.3854.1.0.776 | |
| spRelayArray7_7Status NOTIFICATION-TYPE RelayArray7.7 sensor trap | 1.3.6.1.4.1.3854.1.0.777 | |
| spRelayArray7_8Status NOTIFICATION-TYPE RelayArray7.8 sensor trap | 1.3.6.1.4.1.3854.1.0.778 | |
| spRelayArray8_1Status NOTIFICATION-TYPE RelayArray8.1 sensor trap | 1.3.6.1.4.1.3854.1.0.781 | |
| spRelayArray8_2Status NOTIFICATION-TYPE RelayArray8.2 sensor trap | 1.3.6.1.4.1.3854.1.0.782 | |
| spRelayArray8_3Status NOTIFICATION-TYPE RelayArray8.3 sensor trap | 1.3.6.1.4.1.3854.1.0.783 | |
| spRelayArray8_4Status NOTIFICATION-TYPE RelayArray8.4 sensor trap | 1.3.6.1.4.1.3854.1.0.784 | |
| spRelayArray8_5Status NOTIFICATION-TYPE RelayArray8.5 sensor trap | 1.3.6.1.4.1.3854.1.0.785 | |
| spRelayArray8_6Status NOTIFICATION-TYPE RelayArray8.6 sensor trap | 1.3.6.1.4.1.3854.1.0.786 | |
| spRelayArray8_7Status NOTIFICATION-TYPE RelayArray8.7 sensor trap | 1.3.6.1.4.1.3854.1.0.787 | |
| spRelayArray8_8Status NOTIFICATION-TYPE RelayArray8.8 sensor trap | 1.3.6.1.4.1.3854.1.0.788 | |
| spVirtual1Status NOTIFICATION-TYPE Virtual1 sensor trap | 1.3.6.1.4.1.3854.1.0.801 | |
| spVirtual2Status NOTIFICATION-TYPE Virtual2 sensor trap | 1.3.6.1.4.1.3854.1.0.802 | |
| spVirtual3Status NOTIFICATION-TYPE Virtual3 sensor trap | 1.3.6.1.4.1.3854.1.0.803 | |
| spVirtual4Status NOTIFICATION-TYPE Virtual4 sensor trap | 1.3.6.1.4.1.3854.1.0.804 | |
| spVirtual5Status NOTIFICATION-TYPE Virtual5 sensor trap | 1.3.6.1.4.1.3854.1.0.805 | |
| spVirtual6Status NOTIFICATION-TYPE Virtual6 sensor trap | 1.3.6.1.4.1.3854.1.0.806 | |
| spVirtual7Status NOTIFICATION-TYPE Virtual7 sensor trap | 1.3.6.1.4.1.3854.1.0.807 | |
| spVirtual8Status NOTIFICATION-TYPE Virtual8 sensor trap | 1.3.6.1.4.1.3854.1.0.808 | |
| spVirtual9Status NOTIFICATION-TYPE Virtual9 sensor trap | 1.3.6.1.4.1.3854.1.0.809 | |
| spVirtual10Status NOTIFICATION-TYPE Virtual10 sensor trap | 1.3.6.1.4.1.3854.1.0.810 | |
| spVirtual11Status NOTIFICATION-TYPE Virtual11 sensor trap | 1.3.6.1.4.1.3854.1.0.811 | |
| spVirtual12Status NOTIFICATION-TYPE Virtual12 sensor trap | 1.3.6.1.4.1.3854.1.0.812 | |
| spVirtual13Status NOTIFICATION-TYPE Virtual13 sensor trap | 1.3.6.1.4.1.3854.1.0.813 | |
| spVirtual14Status NOTIFICATION-TYPE Virtual14 sensor trap | 1.3.6.1.4.1.3854.1.0.814 | |
| spVirtual15Status NOTIFICATION-TYPE Virtual15 sensor trap | 1.3.6.1.4.1.3854.1.0.815 | |
| spVirtual16Status NOTIFICATION-TYPE Virtual16 sensor trap | 1.3.6.1.4.1.3854.1.0.816 | |
| spVirtual17Status NOTIFICATION-TYPE Virtual17 sensor trap | 1.3.6.1.4.1.3854.1.0.817 | |
| spVirtual18Status NOTIFICATION-TYPE Virtual18 sensor trap | 1.3.6.1.4.1.3854.1.0.818 | |
| spVirtual19Status NOTIFICATION-TYPE Virtual19 sensor trap | 1.3.6.1.4.1.3854.1.0.819 | |
| spVirtual20Status NOTIFICATION-TYPE Virtual20 sensor trap | 1.3.6.1.4.1.3854.1.0.820 | |
| spCustomStatus NOTIFICATION-TYPE Custom sensor trap | 1.3.6.1.4.1.3854.1.0.1000 |