SLEV2-Security-MIB
- Registered at
- 1.3.6.1.4.1.6296.102.7
- Last updated
- 2006-05-05 14:06
- Organization
- Organization.
- Namespace
- dasan
- Source file
SLEV2-Security-MIB- Digest
sha256:483992ff783cbdd6179bd941c5e62e174288fdfb0e137fae230be32102f866ed
Description
slev2 security
Contact
Contact-info.
Imports
| From | Symbols |
|---|---|
| DASAN-SMI | sleV2Mgmt |
| INET-ADDRESS-MIB | InetAddress, InetAddressPrefixLength, InetAddressType |
| SLE-TC-MIB | SleControlRequestResultType, SleControlStatusType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | BITS, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TimeStamp |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DASAN-SMI INET-ADDRESS-MIB SLE-TC-MIB SLEV2-Security-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| IntClassIndex type | ||||
| IntFlowClass type | ||||
| IntFlowIndex type | ||||
| IntFlowOrClass type | ||||
| IntIcmpCode type | ||||
| IntIcmpType type | ||||
| IntInterfaceIndex type | ||||
| IntInternetProtocolFlag type | ||||
| IntIpAddrMask type | ||||
| IntL4Port type | ||||
| IntPermit type | ||||
| IntPolicyIndex type | ||||
| IntProtocolType type | ||||
| IntRulePriority type | ||||
| MacAddressMask TEXTUAL-CONVENTION Represents Mac address Mask. | current | |||
| OctetName type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| sleV2SecurityBase OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.1 | |||
| sleVSecurity4 OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2 | |||
| sleV2SecurityACL OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5 | |||
| sleV2Security4ACLBase OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.1 | |||
| sleV2Security4ACLFlow OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.2 | |||
| sleV2Security4ACLFlowInfo OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.2.1 | |||
| sleV2Security4ACLFlowTable OBJECT-TYPE ACL flow table. | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1 | not-accessible | current | |
| sleV2Security4ACLFlowEntry OBJECT-TYPE key: sleV2Security4ACLFlowIndex | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1 | not-accessible | current | |
| sleV2Security4ACLFlowIndex OBJECT-TYPE The index of flow | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.1 | INTEGER (1..1024) | read-only | current |
| sleV2Security4ACLFlowName OBJECT-TYPE The name of flow | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.2 | OctetName | read-only | current |
| sleV2Security4ACLFlowSrcIpAddr OBJECT-TYPE The IP address to match against the packet's source IP address. The value of 0.0.0.0 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.3 | IpAddress | read-only | current |
| sleV2Security4ACLFlowSrcIpAddrMask OBJECT-TYPE The mask of source IP address The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.4 | IntIpAddrMask | read-only | current |
| sleV2Security4ACLFlowDstIpAddr OBJECT-TYPE The IP address to match against the packet's destination IP address. The value of 0.0.0.0 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.5 | IpAddress | read-only | current |
| sleV2Security4ACLFlowDstIpAddrMask OBJECT-TYPE The mask of destination IP address The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.6 | IntIpAddrMask | read-only | current |
| sleV2Security4ACLFlowProtocolType OBJECT-TYPE The type of IP protocol The flat internet protocol is from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode If the value is tcp(6), From sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowTcpFlag value is available If the value is udp(17), From sleV2QoS4FlowUdpSrcStartPort to sleV2QoS4FlowUdpDstEndPort value is available If the value is icmp(1), The value of sleV2QoS4FlowIcmpType and sleV2QoS4FlowIcmpCode is available The value of -1 means any(not set) Otherwise, from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode value is not available The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.7 | IntProtocolType | read-only | current |
| sleV2Security4ACLFlowTcpSrcStartPort OBJECT-TYPE The start source port in range of source port in TCP packet The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.8 | IntL4Port | read-only | current |
| sleV2Security4ACLFlowTcpSrcEndPort OBJECT-TYPE The end source port in range of source port in TCP packet The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.9 | IntL4Port | read-only | current |
| sleV2Security4ACLFlowTcpDstStartPort OBJECT-TYPE The start destination port in range of source port in TCP packet. The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.10 | IntL4Port | read-only | current |
| sleV2Security4ACLFlowTcpDstEndPort OBJECT-TYPE The end destination port in range of destination port in TCP packet. The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.11 | IntL4Port | read-only | current |
| sleV2Security4ACLFlowTcpFlag OBJECT-TYPE The flag in TCP packet | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.12 | Bits {reserv0(0), reserv1(1), urg(2), ack(3), psh(4), rst(5), syn(6), fin(7)} | read-only | current |
| sleV2Security4ACLFlowUdpSrcStartPort OBJECT-TYPE The start source port in range of source port in UDP packet The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.13 | IntL4Port | read-only | current |
| sleV2Security4ACLFlowUdpSrcEndPort OBJECT-TYPE The end source port in range of source port in UDP packet The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.14 | IntL4Port | read-only | current |
| sleV2Security4ACLFlowUdpDstStartPort OBJECT-TYPE The start destination port in range of destination port in UDP packet. The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.15 | IntL4Port | read-only | current |
| sleV2Security4ACLFlowUdpDstEndPort OBJECT-TYPE The end destination port in range of destination port in UDP packet. The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.16 | IntL4Port | read-only | current |
| sleV2Security4ACLFlowIcmpType OBJECT-TYPE The type of ICMP message The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.17 | IntIcmpType | read-only | current |
| sleV2Security4ACLFlowIcmpCode OBJECT-TYPE The code of ICMP message The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.18 | IntIcmpCode | read-only | current |
| sleV2Security4ACLFlowHdrlen OBJECT-TYPE The IP header length. The value of 0 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.19 | INTEGER (0 | 1..15) | read-only | current |
| sleV2Security4ACLFlowIpFlag OBJECT-TYPE The any flag of IP address. | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.20 | INTEGER {none(0), srcAny(1), dstAny(2), srcDstAny(3)} | read-only | current |
| sleV2SecurityACLFlowInetAddrType OBJECT-TYPE IP address type | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.21 | InetAddressType | read-only | current |
| sleV2SecurityACLFlowSrcInetAddr OBJECT-TYPE The IP address to match against the packet's source IP address. | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.22 | InetAddress | read-only | current |
| sleV2SecurityACLFlowDstInetAddr OBJECT-TYPE The IP address to match against the packet's destination IP address. | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.23 | InetAddress | read-only | current |
| sleV2SecurityACLFlowSrcInetAddrLen OBJECT-TYPE The prefix length of source IP address | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.24 | InetAddressPrefixLength | read-only | current |
| sleV2SecurityACLFlowDstInetAddrLen OBJECT-TYPE The prefix length of destination IP address | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.25 | InetAddressPrefixLength | read-only | current |
| sleV2Security4ACLFlowControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2 | |||
| sleV2Security4ACLFlowControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.1 | INTEGER {createFlow(1), modifyFlow(2), destroyFlow(3), destroyAllFlow(4), createFlowEx(5), setFlowEx(6)} | read-write | current |
| sleV2Security4ACLFlowControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.2 | SleControlStatusType | read-only | current |
| sleV2Security4ACLFlowControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.3 | Gauge32 | read-write | current |
| sleV2Security4ACLFlowControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.4 | TimeTicks | read-only | current |
| sleV2Security4ACLFlowControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.5 | SleControlRequestResultType | read-only | current |
| sleV2Security4ACLFlowControlIndex OBJECT-TYPE The index of flow | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.6 | IntFlowIndex | read-write | current |
| sleV2Security4ACLFlowControlName OBJECT-TYPE The name of flow | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.7 | OctetName | read-write | current |
| sleV2Security4ACLFlowControlSrcIpAddr OBJECT-TYPE The IP address to match against the packet's source IP address. The value of 0.0.0.0 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.8 | IpAddress | read-write | current |
| sleV2Security4ACLFlowControlSrcIpAddrMask OBJECT-TYPE The mask of source IP address The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.9 | IntIpAddrMask | read-write | current |
| sleV2Security4ACLFlowControlDstIpAddr OBJECT-TYPE The IP address to match against the packet's destination IP address. The value of 0.0.0.0 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.10 | IpAddress | read-write | current |
| sleV2Security4ACLFlowControlDstIpAddrMask OBJECT-TYPE The mask of destination IP address The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.11 | IntIpAddrMask | read-write | current |
| sleV2Security4ACLFlowControlProtocolType OBJECT-TYPE The type of IP protocol The flat internet protocol is from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode If the value is tcp(6), From sleV2QoS4FlowControlTcpSrcStartPort to sleV2QoS4FlowControlTcpFlag value is available If the value is udp(17), From sleV2QoS4FlowControlUdpSrcStartPort to sleV2QoS4FlowControlUdpDstEndPort value is available If the value is icmp(1), The value of sleV2QoS4FlowControlIcmpType and sleV2QoS4FlowControlIcmpCode is available The value of -1 means any(not set) Otherwise, from sleV2QoS4FlowControlTcpSrcStartPort to sleV2QoS4FlowControlIcmpCode value is not available The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.12 | IntProtocolType | read-write | current |
| sleV2Security4ACLFlowControlTcpSrcStartPort OBJECT-TYPE The start source port in range of source port in TCP packet The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.13 | IntL4Port | read-write | current |
| sleV2Security4ACLFlowControlTcpSrcEndPort OBJECT-TYPE The end source port in range of source port in TCP packet The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.14 | IntL4Port | read-write | current |
| sleV2Security4ACLFlowControlTcpDstStartPort OBJECT-TYPE The start destination port in range of source port in TCP packet. The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.15 | IntL4Port | read-write | current |
| sleV2Security4ACLFlowControlTcpDstEndPort OBJECT-TYPE The end destination port in range of destination port in TCP packet. The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.16 | IntL4Port | read-write | current |
| sleV2Security4ACLFlowControlTcpFlag OBJECT-TYPE The flag in TCP packet | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.17 | Bits {reserv0(0), reserv1(1), urg(2), ack(3), psh(4), rst(5), syn(6), fin(7)} | read-write | current |
| sleV2Security4ACLFlowControlUdpSrcStartPort OBJECT-TYPE The start source port in range of source port in UDP packet The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.18 | IntL4Port | read-write | current |
| sleV2Security4ACLFlowControlUdpSrcEndPort OBJECT-TYPE The end source port in range of source port in UDP packet The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.19 | IntL4Port | read-write | current |
| sleV2Security4ACLFlowControlUdpDstStartPort OBJECT-TYPE The start destination port in range of destination port in UDP packet. The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.20 | IntL4Port | read-write | current |
| sleV2Security4ACLFlowControlUdpDstEndPort OBJECT-TYPE The end destination port in range of destination port in UDP packet. The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.21 | IntL4Port | read-write | current |
| sleV2Security4ACLFlowControlIcmpType OBJECT-TYPE The type of ICMP message The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.22 | IntIcmpType | read-write | current |
| sleV2Security4ACLFlowControlIcmpCode OBJECT-TYPE The code of ICMP message The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.23 | IntIcmpCode | read-write | current |
| sleV2Security4ACLFlowControlHdrlen OBJECT-TYPE The IP header length The value of 0 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.24 | INTEGER (0 | 1..15) | read-write | current |
| sleV2Security4ACLFlowControlIpFlag OBJECT-TYPE The any flag of IP address. | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.25 | INTEGER {none(0), srcAny(1), dstAny(2), srcDstAny(3)} | read-write | current |
| sleV2SecurityACLFlowControlInetAddrType OBJECT-TYPE IP address type | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.26 | InetAddressType | read-write | current |
| sleV2SecurityACLFlowControlSrcInetAddr OBJECT-TYPE The IP address to match against the packet's source IP address. | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.27 | InetAddress | read-write | current |
| sleV2SecurityACLFlowControlDstInetAddr OBJECT-TYPE The IP address to match against the packet's destination IP address. | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.28 | InetAddress | read-write | current |
| sleV2SecurityACLFlowControlSrcInetAddrLen OBJECT-TYPE The prefix length of source IP address | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.29 | InetAddressPrefixLength | read-write | current |
| sleV2SecurityACLFlowControlDstInetAddrLen OBJECT-TYPE The prefix length of destination IP address | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.30 | InetAddressPrefixLength | read-write | current |
| sleV2Security4ACLFlowNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.2.1.3 | |||
| sleV2Security4ACLFlowClass OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.2.2 | |||
| sleV2Security4ACLFlowClassTable OBJECT-TYPE ACL flow class table. | 1.3.6.1.4.1.6296.102.7.2.5.2.2.1 | not-accessible | current | |
| sleV2Security4ACLFlowClassEntry OBJECT-TYPE key: sleV2Security4ACLFlowIndex, sleV2Security4ACLFlowClassIndex | 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1 | not-accessible | current | |
| sleV2Security4ACLFlowClassIndex OBJECT-TYPE The index of the class for the flow | 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1.1 | IntClassIndex | read-only | current |
| sleV2Security4ACLFlowClassID OBJECT-TYPE The identifier of the class | 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1.2 | IntClassIndex | read-only | current |
| sleV2Security4ACLFlowClassName OBJECT-TYPE The name of the class | 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1.3 | OctetName | read-only | current |
| sleV2Security4ACLFlowPolicy OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.2.3 | |||
| sleV2QoS4ACLFlowPolicyTable OBJECT-TYPE ACL flow policy table. | 1.3.6.1.4.1.6296.102.7.2.5.2.3.1 | not-accessible | current | |
| sleV2QoS4ACLFlowPolicyEntry OBJECT-TYPE key: sleV2Security4ACLFlowIndex, sleV2Security4ACLFlowPolicyIndex | 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1 | not-accessible | current | |
| sleV2Security4ACLFlowPolicyIndex OBJECT-TYPE The index of the policy for the flow | 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1.1 | IntPolicyIndex | read-only | current |
| sleV2Security4ACLFlowPolicyID OBJECT-TYPE The identifier of the policy | 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1.2 | IntPolicyIndex | read-only | current |
| sleV2Security4ACLFlowPolicyName OBJECT-TYPE The name of the policy | 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1.3 | OctetName | read-only | current |
| sleV2Security4ACLClass OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.3 | |||
| sleV2Security4ACLClassInfo OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.3.1 | |||
| sleV2Security4ACLClassTable OBJECT-TYPE ACL class table. | 1.3.6.1.4.1.6296.102.7.2.5.3.1.1 | not-accessible | current | |
| sleV2Security4ACLClassEntry OBJECT-TYPE key: sleV2Security4ACLClassIndex | 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1 | not-accessible | current | |
| sleV2Security4ACLClassIndex OBJECT-TYPE The index of class | 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1.1 | IntClassIndex | read-only | current |
| sleV2Security4ACLClassName OBJECT-TYPE The name of class | 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1.2 | OctetName | read-only | current |
| sleV2Security4ACLClassFlowCnt OBJECT-TYPE The counter of flow in class | 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1.3 | Counter32 | read-only | current |
| sleV2Security4ACLClassControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.3.1.2 | |||
| sleV2Security4ACLClassControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.1 | INTEGER {createClass(1), destroyClass(2), destroyAllClass(3)} | read-write | current |
| sleV2Security4ACLClassControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.2 | SleControlStatusType | read-only | current |
| sleV2Security4ACLClassControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.3 | Gauge32 | read-write | current |
| sleV2Security4ACLClassControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.4 | TimeTicks | read-only | current |
| sleV2Security4ACLClassControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.5 | SleControlRequestResultType | read-only | current |
| sleV2Security4ACLClassControlIndex OBJECT-TYPE The index of class | 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.6 | IntClassIndex | read-write | current |
| sleV2Security4ACLClassControlName OBJECT-TYPE The name of class | 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.7 | OctetName | read-write | current |
| sleV2Security4ACLClassNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.3.1.3 | |||
| sleV2Security4ACLClassFlow OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.3.2 | |||
| sleV2Security4ACLClassFlowTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.3.2.1 | not-accessible | current | |
| sleV2Security4ACLClassFlowEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1 | not-accessible | current | |
| sleV2Security4ACLClassFlowIndex OBJECT-TYPE The index of flow in class | 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.1 | IntFlowIndex | read-only | current |
| sleV2Security4ACLClassFlowID OBJECT-TYPE The identifier of flow | 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.2 | IntFlowIndex | read-only | current |
| sleV2Security4ACLClassFlowName OBJECT-TYPE The name of the flow | 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.3 | OctetName | read-only | current |
| sleV2Security4ACLClassFlowClassName OBJECT-TYPE The class name of the Classflow | 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.4 | OctetName | read-only | current |
| sleV2Security4ACLClassFlowControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.3.2.2 | |||
| sleV2Security4ACLClassFlowControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.1 | INTEGER {addFlow(1), deleteFlow(2), deleteAllFlow(3)} | read-write | current |
| sleV2Security4ACLClassFlowControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.2 | SleControlStatusType | read-only | current |
| sleV2Security4ACLClassFlowControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.3 | Gauge32 | read-write | current |
| sleV2Security4ACLClassFlowControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.4 | TimeTicks | read-only | current |
| sleV2Security4ACLClassFlowControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.5 | SleControlRequestResultType | read-only | current |
| sleV2Security4ACLClassFlowControlClassIndex OBJECT-TYPE The index of class | 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.6 | IntClassIndex | read-write | current |
| sleV2Security4ACLClassFlowControlFlowIndex OBJECT-TYPE The index of flow in this class | 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.7 | IntFlowIndex | read-write | current |
| sleV2Security4ACLClassFlowControlFlowID OBJECT-TYPE The index of flow Refer to sleV2QoS4FlowIndex | 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.8 | IntFlowIndex | read-write | current |
| sleV2Security4ACLClassFlowControlClassName OBJECT-TYPE The class name of classFlow | 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.9 | OCTET STRING | read-write | current |
| sleV2Security4ACLClassFlowNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.3.2.3 | |||
| sleV2Security4ACLClassPolicy OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.3.3 | |||
| sleV2Security4ACLClassPolicyTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.3.3.1 | not-accessible | current | |
| sleV2Security4ACLClassPolicyEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1 | not-accessible | current | |
| sleV2Security4ACLClassPolicyIndex OBJECT-TYPE The index of the policy for the class | 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1.1 | IntPolicyIndex | read-only | current |
| sleV2Security4ACLClassPolicyID OBJECT-TYPE The identifier of the policy | 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1.2 | IntPolicyIndex | read-only | current |
| sleV2Security4ACLClassPolicyName OBJECT-TYPE The name of the policy | 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1.3 | OctetName | read-only | current |
| sleV2Security4ACLPolicy OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.4 | |||
| sleV2Security4ACLPolicyInfo OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.4.1 | |||
| sleV2Security4ACLPolicyTable OBJECT-TYPE ACL policy table. | 1.3.6.1.4.1.6296.102.7.2.5.4.1.1 | not-accessible | current | |
| sleV2Security4ACLPolicyEntry OBJECT-TYPE key: sleV2Security4ACLPolicyIndex | 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1 | not-accessible | current | |
| sleV2Security4ACLPolicyIndex OBJECT-TYPE The index of policy | 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.1 | IntPolicyIndex | read-only | current |
| sleV2Security4ACLPolicyName OBJECT-TYPE The name of policy | 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.2 | OctetName | read-only | current |
| sleV2Security4ACLPolicyFlowCnt OBJECT-TYPE The counter of flow that was included to policy | 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.3 | Integer32 | read-only | current |
| sleV2Security4ACLPolicyClassCnt OBJECT-TYPE The counter of class that was included to policy | 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.4 | Integer32 | read-only | current |
| sleV2Security4ACLPolicyPriority OBJECT-TYPE The priority of the policy low : default value | 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.5 | INTEGER {low(1), medium(2), high(3), highest(4)} | read-only | current |
| sleV2Security4ACLPolicyMatchFlag OBJECT-TYPE The action to be apply for matched packets. bit 0: deny the matched packets bit 1: mirror the matched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow | 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.6 | IntPermit | read-only | current |
| sleV2Security4ACLPolicyNomatchFlag OBJECT-TYPE The action to be apply for matched packets. bit 0: deny the nomatched packets bit 1: mirror the nomatched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow | 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.7 | IntPermit | read-only | current |
| sleV2Security4ACLPolicyControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2 | |||
| sleV2Security4ACLPolicyControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.1 | INTEGER {createPolicy(1), setPolicyInfo(2), setMatchAction(3), setNomatchAction(4), destroyPolicy(5)} | read-write | current |
| sleV2Security4ACLPolicyControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.2 | SleControlStatusType | read-only | current |
| sleV2Security4ACLPolicyControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.3 | Gauge32 | read-write | current |
| sleV2Security4ACLPolicyControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.4 | TimeTicks | read-only | current |
| sleV2Security4ACLPolicyControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.5 | SleControlRequestResultType | read-only | current |
| sleV2Security4ACLPolicyControlIndex OBJECT-TYPE The index of policy | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.6 | IntPolicyIndex | read-write | current |
| sleV2Security4ACLPolicyControlName OBJECT-TYPE The name of policy | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.7 | OctetName | read-write | current |
| sleV2Security4ACLPolicyControlPriority OBJECT-TYPE The priority of the policy low : default | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.8 | IntRulePriority | read-write | current |
| sleV2Security4ACLPolicyControlMatchFlag OBJECT-TYPE The action to be apply for matched packets. bit 0: deny the matched packets bit 1: mirror the matched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.9 | IntPermit | read-write | current |
| sleV2Security4ACLPolicyControlNomatchFlag OBJECT-TYPE The action to be apply for matched packets. bit 0: deny the nomatched packets bit 1: mirror the nomatched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.10 | IntPermit | read-write | current |
| sleV2Security4ACLPolicyControlFlowID OBJECT-TYPE The index of flow | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.11 | Integer32 | read-write | current |
| sleV2Security4ACLPolicyControlClassID OBJECT-TYPE The index of class | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.12 | Integer32 | read-write | current |
| sleV2Security4ACLPolicyNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.4.1.3 | |||
| sleV2Security4ACLPolicyFlowClass OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.4.2 | |||
| sleV2Security4ACLPolicyFlowClassTable OBJECT-TYPE ACL policy flow class table. | 1.3.6.1.4.1.6296.102.7.2.5.4.2.1 | not-accessible | current | |
| sleV2Security4ACLPolicyFlowClassEntry OBJECT-TYPE key: sleV2Security4ACLPolicyIndex, sleV2Security4ACLPolicyFlowClassIndex | 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1 | not-accessible | current | |
| sleV2Security4ACLPolicyFlowClassIndex OBJECT-TYPE The index of flow or class in policy | 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.1 | IntFlowIndex | read-only | current |
| sleV2Security4ACLPolicyFlowClassType OBJECT-TYPE The flag about flow or class | 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.2 | IntFlowOrClass | read-only | current |
| sleV2Security4ACLPolicyFlowClassID OBJECT-TYPE The identifier of class or flow | 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.3 | IntFlowIndex | read-only | current |
| sleV2Security4ACLPolicyFlowClassName OBJECT-TYPE The name of class or flow | 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.4 | OctetName | read-only | current |
| sleV2Security4ACLPolicyFlowClassControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.4.2.2 | |||
| sleV2Security4ACLPolicyFlowClassControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.1 | INTEGER {addFlowClass(1), deleteFlowClass(2), deleteAllFlow(3), deleteAllClass(4), deleteAllFlowClass(5)} | read-write | current |
| sleV2Security4ACLPolicyFlowClassControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.2 | SleControlStatusType | read-write | current |
| sleV2Security4ACLPolicyFlowClassControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.3 | Gauge32 | read-write | current |
| sleV2Security4ACLPolicyFlowClassControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.4 | TimeTicks | read-write | current |
| sleV2Security4ACLPolicyFlowClassControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.5 | SleControlRequestResultType | read-write | current |
| sleV2Security4ACLPolicyFlowClassControlPolicyIndex OBJECT-TYPE The index of Policy | 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.6 | IntPolicyIndex | read-write | current |
| sleV2Security4ACLPolicyFlowClassControlIndex OBJECT-TYPE The index of flow or class in this policy | 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.7 | IntFlowIndex | read-write | current |
| sleV2Security4ACLPolicyFlowClassControlType OBJECT-TYPE The type of flow or class | 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.8 | IntFlowOrClass | read-write | current |
| sleV2Security4ACLPolicyFlowClassControlFlowID OBJECT-TYPE The index of flow Available according to sleV2QoS4PolicyFlowClassControlType. | 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.9 | IntFlowIndex | read-write | current |
| sleV2Security4ACLPolicyFlowClassControlClassID OBJECT-TYPE The index of class Available according to sleV2QoS4PolicyFlowClassControlType. | 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.10 | IntClassIndex | read-write | current |
| sleV2Security4ACLPolicyFlowClassNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.4.2.3 | |||
| sleV2Security4ACLGroup OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.5 | |||
| sleV2Security4ACLGroupIf OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.5.1 | |||
| sleV2Security4ACLGroupIfTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.5.1.1 | not-accessible | current | |
| sleV2Security4ACLGroupIfEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1 | not-accessible | current | |
| sleV2Security4ACLGroupIfindex OBJECT-TYPE interface index | 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleV2Security4ACLGroupIfType OBJECT-TYPE The access-list type | 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.2 | INTEGER {ip(3), mac(4)} | read-only | current |
| sleV2Security4ACLGroupIfName OBJECT-TYPE The access-list name | 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.3 | OCTET STRING | read-only | current |
| sleV2Security4ACLGroupIfPriority OBJECT-TYPE The policy priority | 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.4 | INTEGER {low(1), medium(2), high(3), highest(4)} | read-only | current |
| sleV2Security4ACLGroupIfControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.5.1.2 | |||
| sleV2Security4ACLGroupIfControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.1 | INTEGER {setSecurityAclGroupIfProfile(1), delSecurityAclGroupIfProfile(2)} | read-write | current |
| sleV2Security4ACLGroupIfControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.2 | SleControlStatusType | read-write | current |
| sleV2Security4ACLGroupIfControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.3 | Gauge32 | read-write | current |
| sleV2Security4ACLGroupIfControlReqResult OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.4 | TimeTicks | read-write | current |
| sleV2Security4ACLGroupIfControlTimeStamp OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.5 | SleControlRequestResultType | read-write | current |
| sleV2Security4ACLGroupIfConrolIndex OBJECT-TYPE interface index | 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.6 | Integer32 | read-write | current |
| sleV2Security4ACLGroupIfControlType OBJECT-TYPE The access-list type | 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.7 | INTEGER {ip(3), mac(4)} | read-write | current |
| sleV2Security4ACLGroupIfControlName OBJECT-TYPE The access-list name | 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.8 | OCTET STRING | read-write | current |
| sleV2Security4ACLGroupIfControlPriority OBJECT-TYPE Integer 1: low(1) 2: medium(2) 3: high(3) 4: highest(4) The policy priority | 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.9 | INTEGER {low(1), medium(2), high(3), highest(4)} | read-write | current |
| sleV2SecurityACLGroupIfNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.5.5.1.3 | |||
| sleV2SecuritySACL OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.6 | |||
| sleV2SecuritySACLTable OBJECT-TYPE ACL table. | 1.3.6.1.4.1.6296.102.7.2.6.1 | not-accessible | current | |
| sleV2SecuritySACLEntry OBJECT-TYPE key: sleV2SecuritySACLName | 1.3.6.1.4.1.6296.102.7.2.6.1.1 | not-accessible | current | |
| sleV2SecuritySACLName OBJECT-TYPE Name of this ACL rule | 1.3.6.1.4.1.6296.102.7.2.6.1.1.1 | OctetName | read-only | current |
| sleV2SecuritySACLSrcIpaddr OBJECT-TYPE The IP address to match against the packet's source IP address | 1.3.6.1.4.1.6296.102.7.2.6.1.1.2 | IpAddress | read-only | current |
| sleV2SecuritySACLSrcPrefixLength OBJECT-TYPE Subnet mask. | 1.3.6.1.4.1.6296.102.7.2.6.1.1.3 | Integer32 (0..32) | read-only | current |
| sleV2SecuritySACLDstIpAddr OBJECT-TYPE The IP address to match against the packet's destination IP address | 1.3.6.1.4.1.6296.102.7.2.6.1.1.4 | IpAddress | read-only | current |
| sleV2SecuritySACLDstPrefixLength OBJECT-TYPE Subnet mask. | 1.3.6.1.4.1.6296.102.7.2.6.1.1.5 | Integer32 (0..32) | read-only | current |
| sleV2SecuritySACLProtocolType OBJECT-TYPE The type of IP protocol The flat internet protocol is from sleV2SecuritySACLTcpflag to sleV2SecuritySACLIcmpCode If the value is tcp(6) or udp(17), From sleV2SecuritySACLTcpflag to sleV2SecuritySACLDstL4Port value is available If the value is icmp(1), The value of sleV2SecuritySACLIcmpType and sleV2SecuritySACLIcmpCode is available The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.6.1.1.6 | IntProtocolType | read-only | current |
| sleV2SecuritySACLTcpflag OBJECT-TYPE TCP flag | 1.3.6.1.4.1.6296.102.7.2.6.1.1.7 | Bits {reserv(0), reserv1(1), urg(2), ack(3), psh(4), rst(5), syn(6), fin(7)} | read-only | current |
| sleV2SecuritySACLSrcL4Port OBJECT-TYPE The source service port number (only valid for TCP or UDP packet).. | 1.3.6.1.4.1.6296.102.7.2.6.1.1.8 | IntL4Port | read-only | current |
| sleV2SecuritySACLDstL4Port OBJECT-TYPE The destination service port number (only valid for TCP or UDP packet). | 1.3.6.1.4.1.6296.102.7.2.6.1.1.9 | IntL4Port | read-only | current |
| sleV2SecuritySACLIcmpType OBJECT-TYPE The Type of ICMP message The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.6.1.1.10 | IntProtocolType | read-only | current |
| sleV2SecuritySACLIcmpCode OBJECT-TYPE The code of ICMP message The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.6.1.1.11 | IntProtocolType | read-only | current |
| sleV2SecuritySACLPriority OBJECT-TYPE The type of ICMP message The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.6.1.1.12 | INTEGER {low(1), medium(2), high(3), highest(4)} | read-only | current |
| sleV2SecuritySACLMatchAction OBJECT-TYPE Action for packets that match against this ACL rule. | 1.3.6.1.4.1.6296.102.7.2.6.1.1.13 | INTEGER {none(0), permit(1), deny(2)} | read-only | current |
| sleV2SecuritySACLNomatchAction OBJECT-TYPE Action for packets that don't match against this ACL rule. | 1.3.6.1.4.1.6296.102.7.2.6.1.1.14 | INTEGER {none(0), permit(1), deny(2)} | read-only | current |
| sleV2SecuritySACLControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.6.2 | |||
| sleV2SecuritySACLControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.102.7.2.6.2.1 | INTEGER {createSAclRule(1), destroySAclRule(2), destroyAllSAclRule(3)} | read-write | current |
| sleV2SecuritySACLControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.102.7.2.6.2.2 | SleControlStatusType | read-only | current |
| sleV2SecuritySACLControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.102.7.2.6.2.3 | Gauge32 | read-write | current |
| sleV2SecuritySACLControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.102.7.2.6.2.4 | TimeStamp | read-only | current |
| sleV2SecuritySACLControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.102.7.2.6.2.5 | SleControlRequestResultType | read-only | current |
| sleV2SecuritySACLControlName OBJECT-TYPE Name of this ACL rule | 1.3.6.1.4.1.6296.102.7.2.6.2.6 | OctetName | read-write | current |
| sleV2SecuritySACLControlSrcIpaddr OBJECT-TYPE The IP address to match against the packet's source IP address | 1.3.6.1.4.1.6296.102.7.2.6.2.7 | IpAddress | read-write | current |
| sleV2SecuritySACLControlSrcPrefixLength OBJECT-TYPE Subnet mask. | 1.3.6.1.4.1.6296.102.7.2.6.2.8 | IntIpAddrMask | read-write | current |
| sleV2SecuritySACLControlDstIpaddr OBJECT-TYPE The IP address to match against the packet's destination IP address | 1.3.6.1.4.1.6296.102.7.2.6.2.9 | IpAddress | read-write | current |
| sleV2SecuritySACLControlDstPrefixLength OBJECT-TYPE Subnet mask. | 1.3.6.1.4.1.6296.102.7.2.6.2.10 | IntIpAddrMask | read-write | current |
| sleV2SecuritySACLControlProtocolType OBJECT-TYPE The IP protocol type value | 1.3.6.1.4.1.6296.102.7.2.6.2.11 | IntProtocolType | read-write | current |
| sleV2SecuritySACLControlTcpflag OBJECT-TYPE TCP flag | 1.3.6.1.4.1.6296.102.7.2.6.2.12 | Bits {reserv(0), reserv1(1), urg(2), ack(3), psh(4), rst(5), syn(6), fin(7)} | read-write | current |
| sleV2SecuritySACLControlSrcL4Port OBJECT-TYPE The source service port number (only valid for TCP or UDP packet).. | 1.3.6.1.4.1.6296.102.7.2.6.2.13 | IntL4Port | read-write | current |
| sleV2SecuritySACLControlDstL4Port OBJECT-TYPE The destination service port number (only valid for TCP or UDP packet). | 1.3.6.1.4.1.6296.102.7.2.6.2.14 | IntL4Port | read-write | current |
| sleV2SecuritySACLControlIcmpType OBJECT-TYPE The type of ICMP message The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.6.2.15 | IntProtocolType | read-write | current |
| sleV2SecuritySACLControlIcmpCode OBJECT-TYPE The code of ICMP message The value of -1 means any(not set) | 1.3.6.1.4.1.6296.102.7.2.6.2.16 | IntProtocolType | read-write | current |
| sleV2SecuritySACLControlPriority OBJECT-TYPE The Priority of this ACL rule) | 1.3.6.1.4.1.6296.102.7.2.6.2.17 | INTEGER {low(1), medium(2), high(3), highest(4)} | read-write | current |
| sleV2SecuritySACLControlMatchAction OBJECT-TYPE Action for packets that match against this ACL rule. | 1.3.6.1.4.1.6296.102.7.2.6.2.18 | INTEGER {none(0), permit(1), deny(2)} | read-write | current |
| sleV2SecuritySACLControlNomatchAction OBJECT-TYPE Action for packets that don't match against this ACL rule. | 1.3.6.1.4.1.6296.102.7.2.6.2.19 | INTEGER {none(0), permit(1), deny(2)} | read-write | current |
| sleV2SecuritySACLNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.6.3 | |||
| sleV2SecurityACLStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.7 | |||
| sleV2SecurityACLStatisticsBase OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.7.1 | |||
| sleV2SecurityACLStatisticsBaseInfo OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.7.1.1 | |||
| sleV2SecurityACLStatisticsSyslogStatus OBJECT-TYPE ACL statistics syslog status | 1.3.6.1.4.1.6296.102.7.2.7.1.1.1 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleV2SecurityACLStatisticsBaseControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.7.1.2 | |||
| sleV2SecurityACLStatisticsBaseControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.102.7.2.7.1.2.1 | INTEGER {aclSyslogModeChange(1)} | read-write | current |
| sleV2SecurityACLStatisticsBaseControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.102.7.2.7.1.2.2 | SleControlStatusType | read-only | current |
| sleV2SecurityACLStatisticsBaseControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.102.7.2.7.1.2.3 | Gauge32 | read-write | current |
| sleV2SecurityACLStatisticsBaseControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.102.7.2.7.1.2.4 | TimeStamp | read-only | current |
| sleV2SecurityACLStatisticsBaseControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.102.7.2.7.1.2.5 | SleControlRequestResultType | read-only | current |
| sleV2SecurityACLStatisticsBaseControlSyslogMode OBJECT-TYPE The ACL statistics syslog mode | 1.3.6.1.4.1.6296.102.7.2.7.1.2.6 | INTEGER {enable(1), disable(2)} | read-write | current |
| sleV2SecurityACLStatisticsBaseNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.7.1.3 | |||
| sleV2SecurityACLStatisticsPacketHistory OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.7.2 | |||
| sleV2SecurityACLPacketCountTable OBJECT-TYPE ACL packet count table. | 1.3.6.1.4.1.6296.102.7.2.7.2.1 | not-accessible | current | |
| sleV2SecurityACLPacketCountEntry OBJECT-TYPE key: sleV2SecuritySACLName | 1.3.6.1.4.1.6296.102.7.2.7.2.1.1 | not-accessible | current | |
| sleV2SecurityACLTotalPacket OBJECT-TYPE ACL total packet | 1.3.6.1.4.1.6296.102.7.2.7.2.1.1.1 | Counter64 | read-only | current |
| sleV2SecurityACLSrcHistoryTable OBJECT-TYPE ACL source history table. | 1.3.6.1.4.1.6296.102.7.2.7.2.2 | not-accessible | current | |
| sleV2SecurityACLSrcHistoryEntry OBJECT-TYPE key: sleV2SecuritySACLName, sleV2SecurityACLSrcHistoryIndex | 1.3.6.1.4.1.6296.102.7.2.7.2.2.1 | not-accessible | current | |
| sleV2SecurityACLSrcHistoryIndex OBJECT-TYPE The ACL index. | 1.3.6.1.4.1.6296.102.7.2.7.2.2.1.1 | Integer32 (1..1024) | read-only | current |
| sleV2SecurityACLSrcHistoryIpAddr OBJECT-TYPE The ACl IP address | 1.3.6.1.4.1.6296.102.7.2.7.2.2.1.2 | IpAddress | read-only | current |
| sleV2SecurityACLStatisticsControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.7.2.3 | |||
| sleV2SecurityACLStatisticsControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.102.7.2.7.2.3.1 | INTEGER {clearAruleStatus(1)} | read-write | current |
| sleV2SecurityACLStatisticsControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.102.7.2.7.2.3.2 | SleControlStatusType | read-only | current |
| sleV2SecurityACLStatisticsControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.102.7.2.7.2.3.3 | Gauge32 | read-write | current |
| sleV2SecurityACLStatisticsControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.102.7.2.7.2.3.4 | TimeStamp | read-only | current |
| sleV2SecurityACLStatisticsControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.102.7.2.7.2.3.5 | SleControlRequestResultType | read-only | current |
| sleV2SecurityACLStatisticsControlName OBJECT-TYPE The ACL statistics name | 1.3.6.1.4.1.6296.102.7.2.7.2.3.6 | OctetName | read-write | current |
| sleV2SecurityACLStatisticsNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.7.2.4 | |||
| sleV2CpuPacketFilter OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.8 | |||
| sleV2CpuPacketFilterTable OBJECT-TYPE cpu packet filter table. | 1.3.6.1.4.1.6296.102.7.2.8.1 | not-accessible | current | |
| sleV2CpuPacketFilterEntry OBJECT-TYPE key: sleV2CpuPacketFilterIndex | 1.3.6.1.4.1.6296.102.7.2.8.1.1 | not-accessible | current | |
| sleV2CpuPacketFilterIndex OBJECT-TYPE The index of cpu packet filter | 1.3.6.1.4.1.6296.102.7.2.8.1.1.1 | Integer32 (1..2147483647) | read-only | current |
| sleV2CpuPacketFilterName OBJECT-TYPE The name of cpu packet filter | 1.3.6.1.4.1.6296.102.7.2.8.1.1.2 | OCTET STRING | read-only | current |
| sleV2CpuPacketFilterCreationTime OBJECT-TYPE The creation time. (unit : sec) | 1.3.6.1.4.1.6296.102.7.2.8.1.1.3 | Counter32 | read-only | current |
| sleV2CpuPacketFilterElapsedtimeAfterClear OBJECT-TYPE The elapsed time after clear (unit : sec) | 1.3.6.1.4.1.6296.102.7.2.8.1.1.4 | Counter32 | read-only | current |
| sleV2CpuPacketFilterStage OBJECT-TYPE The stage of cpu packet filter. | 1.3.6.1.4.1.6296.102.7.2.8.1.1.5 | INTEGER {cpuingress(1), cpuegress(2), portrx(3), porttx(4), vlanAssigned(5), unknown(255)} | read-only | current |
| sleV2CpuPacketFilterPriority OBJECT-TYPE The priority of cpu packet filter. | 1.3.6.1.4.1.6296.102.7.2.8.1.1.6 | Integer32 (1..65535) | read-only | current |
| sleV2CpuPacketFilterAction OBJECT-TYPE The action to matched packet. Dot1q -> replace dot1qAttach -> add dot1qDettach -> remove | 1.3.6.1.4.1.6296.102.7.2.8.1.1.7 | INTEGER {drop(1), permit(2), rateLimit(3), pass(4), dot1q(5), dot1qAttach(6), dot1qDetach(7), unknown(255)} | read-only | current |
| sleV2CpuPacketFilterActionRateLimit OBJECT-TYPE The allowed-packet count per second. | 1.3.6.1.4.1.6296.102.7.2.8.1.1.8 | Integer32 (1..100) | read-only | current |
| sleV2CpuPacketFilterActionBurstSize OBJECT-TYPE The burst-allowed-packet count. | 1.3.6.1.4.1.6296.102.7.2.8.1.1.9 | Integer32 (1..100) | read-only | current |
| sleV2CpuPacketFilterActionTpid OBJECT-TYPE The Action TPID The value 65535(0xffff) means any. | 1.3.6.1.4.1.6296.102.7.2.8.1.1.10 | Integer32 (0..65535) | read-only | current |
| sleV2CpuPacketFilterActionPcp OBJECT-TYPE The Action PCP. The value 255(0xff) means any. | 1.3.6.1.4.1.6296.102.7.2.8.1.1.11 | Integer32 (0..7 | 255) | read-only | current |
| sleV2CpuPacketFilterActionVid OBJECT-TYPE The Action VID The value 65535(0xffff) means any. | 1.3.6.1.4.1.6296.102.7.2.8.1.1.12 | Integer32 (0 | 1..4094 | 65535) | read-only | current |
| sleV2CpuPacketFilterActionTagPosition OBJECT-TYPE The Action tag position. 1 s-vlan 2 c-vlan | 1.3.6.1.4.1.6296.102.7.2.8.1.1.13 | Integer32 (0 | 1..8) | read-only | current |
| sleV2CpuPacketFilterMatchTable OBJECT-TYPE cpu packet filter match table. | 1.3.6.1.4.1.6296.102.7.2.8.2 | not-accessible | current | |
| sleV2CpuPacketFilterMatchEntry OBJECT-TYPE key: sleV2CpuPacketFilterIndex, sleV2CpuPacketFilterMatchIndex | 1.3.6.1.4.1.6296.102.7.2.8.2.1 | not-accessible | current | |
| sleV2CpuPacketFilterMatchIndex OBJECT-TYPE The match entry Index | 1.3.6.1.4.1.6296.102.7.2.8.2.1.1 | Integer32 (1..65535) | read-only | current |
| sleV2CpuPacketFilterMatchType OBJECT-TYPE The match classifiter type. | 1.3.6.1.4.1.6296.102.7.2.8.2.1.2 | Bits {vid(0), cos(1), port(2), offset(3), dot1q(4)} | read-only | current |
| sleV2CpuPacketFilterMatchCos OBJECT-TYPE The matched CoS Queue. | 1.3.6.1.4.1.6296.102.7.2.8.2.1.3 | OCTET STRING | read-only | current |
| sleV2CpuPacketFilterMatchPort OBJECT-TYPE The matched port index. | 1.3.6.1.4.1.6296.102.7.2.8.2.1.4 | OCTET STRING | read-only | current |
| sleV2CpuPacketFilterMatchVidmap OBJECT-TYPE The matched VID. | 1.3.6.1.4.1.6296.102.7.2.8.2.1.5 | OCTET STRING | read-only | current |
| sleV2CpuPacketFilterMatchTagPosition OBJECT-TYPE The matched tag position. | 1.3.6.1.4.1.6296.102.7.2.8.2.1.6 | Integer32 (0 | 1..8) | read-only | current |
| sleV2CpuPacketFilterMatchTpid OBJECT-TYPE The matched TPID. | 1.3.6.1.4.1.6296.102.7.2.8.2.1.7 | Integer32 (0..65535) | read-only | current |
| sleV2CpuPacketFilterMatchPcp OBJECT-TYPE The matched PCP | 1.3.6.1.4.1.6296.102.7.2.8.2.1.8 | Integer32 (0..7 | 255) | read-only | current |
| sleV2CpuPacketFilterMatchVid OBJECT-TYPE The matched VID | 1.3.6.1.4.1.6296.102.7.2.8.2.1.9 | Integer32 (0 | 1..4094 | 65535) | read-only | current |
| sleV2CpuPacketFilterMatchOffset OBJECT-TYPE The matched offset | 1.3.6.1.4.1.6296.102.7.2.8.2.1.10 | Integer32 (0..127) | read-only | current |
| sleV2CpuPacketFilterMatchLength OBJECT-TYPE The matched Length | 1.3.6.1.4.1.6296.102.7.2.8.2.1.11 | Integer32 (1..16) | read-only | current |
| sleV2CpuPacketFilterMatchData OBJECT-TYPE The matched data. (HEX string) | 1.3.6.1.4.1.6296.102.7.2.8.2.1.12 | OCTET STRING | read-only | current |
| sleV2CpuPacketFilterMatchMask OBJECT-TYPE The matched mask. (HEX string) | 1.3.6.1.4.1.6296.102.7.2.8.2.1.13 | OCTET STRING | read-only | current |
| sleV2CpuPacketFilterMatchDesc OBJECT-TYPE The matched Description | 1.3.6.1.4.1.6296.102.7.2.8.2.1.14 | OCTET STRING | read-only | current |
| sleV2CpuPacketFilterControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.8.3 | |||
| sleV2CpuPacketFilterControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.102.7.2.8.3.1 | INTEGER {addCpuPktFilter(1), delCpuPktfilter(2), setAction(3), addMatch(4), delMatch(5)} | read-write | current |
| sleV2CpuPacketFilterControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.102.7.2.8.3.2 | SleControlStatusType | read-only | current |
| sleV2CpuPacketFilterControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.102.7.2.8.3.3 | Gauge32 | read-write | current |
| sleV2CpuPacketFilterControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.102.7.2.8.3.4 | TimeStamp | read-only | current |
| sleV2CpuPacketFilterControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.102.7.2.8.3.5 | SleControlRequestResultType | read-only | current |
| sleV2CpuPacketFilterControlIndex OBJECT-TYPE The match entry Index | 1.3.6.1.4.1.6296.102.7.2.8.3.6 | Integer32 (1..2147483647) | read-write | current |
| sleV2CpuPacketFilterControlName OBJECT-TYPE Cpu packet filter name. | 1.3.6.1.4.1.6296.102.7.2.8.3.7 | OCTET STRING | read-write | current |
| sleV2CpuPacketFilterControlStage OBJECT-TYPE The stage of cpu packet filter. | 1.3.6.1.4.1.6296.102.7.2.8.3.8 | INTEGER {cpuingress(1), cpuegress(2), portrx(3), porttx(4), vlanAssigned(5), unknown(255)} | read-write | current |
| sleV2CpuPacketFilterControlPriority OBJECT-TYPE The priority of cpu packet filter. | 1.3.6.1.4.1.6296.102.7.2.8.3.9 | Integer32 (1..65535) | read-write | current |
| sleV2CpuPacketFilterControlAction OBJECT-TYPE The action to matched packet. Dot1q -> replace dot1qAttach -> add dot1qDettach -> remove | 1.3.6.1.4.1.6296.102.7.2.8.3.10 | INTEGER {drop(1), permit(2), rateLimit(3), pass(4), dot1q(5), dot1qAttach(6), dot1qDetach(7), unknown(255)} | read-write | current |
| sleV2CpuPacketFilterControlActionRateLimit OBJECT-TYPE The allowed-packet count per second. | 1.3.6.1.4.1.6296.102.7.2.8.3.11 | Integer32 (1..100) | read-write | current |
| sleV2CpuPacketFilterControlActionBurstSize OBJECT-TYPE The burst-allowed-packet count. | 1.3.6.1.4.1.6296.102.7.2.8.3.12 | Integer32 (1..100) | read-write | current |
| sleV2CpuPacketFilterControlActionTpid OBJECT-TYPE The Action TPID The value 65535(0xffff) means any. | 1.3.6.1.4.1.6296.102.7.2.8.3.13 | Integer32 (0..65535) | read-write | current |
| sleV2CpuPacketFilterControlActionPcp OBJECT-TYPE The Action PCP. The value 255(0xff) means any. | 1.3.6.1.4.1.6296.102.7.2.8.3.14 | Integer32 (0..7 | 255) | read-write | current |
| sleV2CpuPacketFilterControlActionVid OBJECT-TYPE The Action VID The value 65535(0xffff) means any. | 1.3.6.1.4.1.6296.102.7.2.8.3.15 | Integer32 (0 | 1..4094 | 65535) | read-write | current |
| sleV2CpuPacketFilterControlActionTagPosition OBJECT-TYPE The Action tag position. 1: S-vlan 2: C-vlan M2200 uses only 1 and 2. | 1.3.6.1.4.1.6296.102.7.2.8.3.16 | Integer32 (0 | 1..8) | read-write | current |
| sleV2CpuPacketFilterControlMatchType OBJECT-TYPE The match classifiter type. | 1.3.6.1.4.1.6296.102.7.2.8.3.17 | Bits {vid(0), cos(1), port(2), offset(3), dot1q(4)} | read-write | current |
| sleV2CpuPacketFilterControlMatchCos OBJECT-TYPE The matched CoS Queue. M2200 doesn't use | 1.3.6.1.4.1.6296.102.7.2.8.3.18 | OCTET STRING | read-write | current |
| sleV2CpuPacketFilterControlMatchPort OBJECT-TYPE The matched port index. | 1.3.6.1.4.1.6296.102.7.2.8.3.19 | OCTET STRING | read-write | current |
| sleV2CpuPacketFilterControlMatchVidmap OBJECT-TYPE The matched VID M2200 doesn't use | 1.3.6.1.4.1.6296.102.7.2.8.3.20 | OCTET STRING | read-write | current |
| sleV2CpuPacketFilterControlMatchTagPosition OBJECT-TYPE The matched tag position M2200 doesn't use | 1.3.6.1.4.1.6296.102.7.2.8.3.21 | Integer32 (0 | 1..8) | read-write | current |
| sleV2CpuPacketFilterControlMatchTpid OBJECT-TYPE The matched TPID. | 1.3.6.1.4.1.6296.102.7.2.8.3.22 | Integer32 (0..65535) | read-write | current |
| sleV2CpuPacketFilterControlMatchPcp OBJECT-TYPE The matched PCP | 1.3.6.1.4.1.6296.102.7.2.8.3.23 | Integer32 (0..7 | 255) | read-write | current |
| sleV2CpuPacketFilterControlMatchVid OBJECT-TYPE The matched VID | 1.3.6.1.4.1.6296.102.7.2.8.3.24 | Integer32 (0 | 1..4094 | 65535) | read-write | current |
| sleV2CpuPacketFilterControlMatchOffset OBJECT-TYPE The matched offset | 1.3.6.1.4.1.6296.102.7.2.8.3.25 | Integer32 (0..127) | read-write | current |
| sleV2CpuPacketFilterControlMatchLength OBJECT-TYPE The matched Length | 1.3.6.1.4.1.6296.102.7.2.8.3.26 | Integer32 (1..16) | read-write | current |
| sleV2CpuPacketFilterControlMatchData OBJECT-TYPE he matched data. (HEX string) | 1.3.6.1.4.1.6296.102.7.2.8.3.27 | OCTET STRING | read-write | current |
| sleV2CpuPacketFilterControlMatchMask OBJECT-TYPE The matched mask. (HEX string) | 1.3.6.1.4.1.6296.102.7.2.8.3.28 | OCTET STRING | read-write | current |
| sleV2CpuPacketFilterControlMatchDesc OBJECT-TYPE The matched Description | 1.3.6.1.4.1.6296.102.7.2.8.3.29 | OCTET STRING | read-write | current |
| sleV2CpuPacketFilterNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.8.4 | |||
| sleV2VlanOperation OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.9 | |||
| sleV2VlanOperationTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.9.1 | not-accessible | current | |
| sleV2VlanOperationEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.9.1.1 | not-accessible | current | |
| sleV2VlanOperationIndex OBJECT-TYPE The vlan operation index. | 1.3.6.1.4.1.6296.102.7.2.9.1.1.1 | Integer32 (1..65565) | read-only | current |
| sleV2VlanOperationName OBJECT-TYPE The vlan operation name | 1.3.6.1.4.1.6296.102.7.2.9.1.1.2 | OCTET STRING | read-only | current |
| sleV2VlanOperationStage OBJECT-TYPE The vlan operation stage. | 1.3.6.1.4.1.6296.102.7.2.9.1.1.3 | INTEGER {ingressSlowPath(1), egressSlowPath(2)} | read-only | current |
| sleV2VlanOperationProiroty OBJECT-TYPE The vlan operation priority. | 1.3.6.1.4.1.6296.102.7.2.9.1.1.4 | Integer32 (1..65535) | read-only | current |
| sleV2VlanOperationPort OBJECT-TYPE The vlan operation ports | 1.3.6.1.4.1.6296.102.7.2.9.1.1.5 | OCTET STRING | read-only | current |
| sleV2VlanOperationOuterVlan OBJECT-TYPE The Outer vlan. | 1.3.6.1.4.1.6296.102.7.2.9.1.1.6 | OCTET STRING | read-only | current |
| sleV2VlanOperationInnerVlan OBJECT-TYPE The inner Vlan. | 1.3.6.1.4.1.6296.102.7.2.9.1.1.7 | OCTET STRING | read-only | current |
| sleV2VlanOperationEtherType OBJECT-TYPE The vlan operation ether-type. | 1.3.6.1.4.1.6296.102.7.2.9.1.1.8 | Integer32 | read-only | current |
| sleV2VlanOperationIpProtocol OBJECT-TYPE The vlan operation IP Protocol | 1.3.6.1.4.1.6296.102.7.2.9.1.1.9 | Integer32 | read-only | current |
| sleV2VlanOperationArpSip OBJECT-TYPE The vlan operation source-IPaddress. | 1.3.6.1.4.1.6296.102.7.2.9.1.1.10 | OCTET STRING | read-only | current |
| sleV2VlanOperationArpSipPfxLen OBJECT-TYPE The vlan operation source-IPAddress prefix-length. | 1.3.6.1.4.1.6296.102.7.2.9.1.1.11 | Integer32 | read-only | current |
| sleV2VlanOperationSip OBJECT-TYPE The vlan operation Source-IPaddress. | 1.3.6.1.4.1.6296.102.7.2.9.1.1.12 | OCTET STRING | read-only | current |
| sleV2VlanOperationSipPfxLen OBJECT-TYPE The vlan operation Source-IPAddress prefix-length. | 1.3.6.1.4.1.6296.102.7.2.9.1.1.13 | Integer32 | read-only | current |
| sleV2VlanOperationDip OBJECT-TYPE The vlan operation Destination-IPaddress. | 1.3.6.1.4.1.6296.102.7.2.9.1.1.14 | OCTET STRING | read-only | current |
| sleV2VlanOperationDipPfxLen OBJECT-TYPE The vlan operation Destination-IPAddress prefix-length. | 1.3.6.1.4.1.6296.102.7.2.9.1.1.15 | Integer32 | read-only | current |
| sleV2VlanOperationAction OBJECT-TYPE The vlan-operation action types. | 1.3.6.1.4.1.6296.102.7.2.9.1.1.16 | INTEGER {addServiceVlanTag(1), replaceServiceVlanID(2), removeServiceVlanTag(3), addCustomerVlanTag(4), replaceCustomerVlanID(5), removeCustomerVlanTag(6)} | read-only | current |
| sleV2VlanOperationActionVid OBJECT-TYPE The vlan operation action-vid. | 1.3.6.1.4.1.6296.102.7.2.9.1.1.17 | Integer32 (1..4095) | read-only | current |
| sleV2VlanOperationControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.9.2 | |||
| sleV2VlanOperationControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.102.7.2.9.2.1 | INTEGER {addVlanOperation(1), delVlanOperation(2)} | read-write | current |
| sleV2VlanOperationControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.102.7.2.9.2.2 | SleControlStatusType | read-only | current |
| sleV2VlanOperationControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.102.7.2.9.2.3 | Gauge32 | read-write | current |
| sleV2VlanOperationControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.102.7.2.9.2.4 | TimeTicks | read-only | current |
| sleV2VlanOperationControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.102.7.2.9.2.5 | SleControlRequestResultType | read-only | current |
| sleV2VlanOperationControlIndex OBJECT-TYPE The vlan operation index. | 1.3.6.1.4.1.6296.102.7.2.9.2.6 | Integer32 (1..65535) | read-write | current |
| sleV2VlanOperationControlName OBJECT-TYPE The vlan operation name | 1.3.6.1.4.1.6296.102.7.2.9.2.7 | OCTET STRING | read-write | current |
| sleV2VlanOperationControlStage OBJECT-TYPE The vlan operation stage. | 1.3.6.1.4.1.6296.102.7.2.9.2.8 | INTEGER {ingressSlowPath(1), egressSlowPath(2)} | read-write | current |
| sleV2VlanOperationControlProiroty OBJECT-TYPE The vlan operation priority. | 1.3.6.1.4.1.6296.102.7.2.9.2.9 | Integer32 (1..65535) | read-write | current |
| sleV2VlanOperationControlPort OBJECT-TYPE The vlan operation ports | 1.3.6.1.4.1.6296.102.7.2.9.2.10 | OCTET STRING | read-write | current |
| sleV2VlanOperationControlOuterVlan OBJECT-TYPE The Outer vlan. | 1.3.6.1.4.1.6296.102.7.2.9.2.11 | OCTET STRING | read-write | current |
| sleV2VlanOperationControlInnerVlan OBJECT-TYPE The Inner vlan. | 1.3.6.1.4.1.6296.102.7.2.9.2.12 | OCTET STRING | read-write | current |
| sleV2VlanOperationControlEtherType OBJECT-TYPE The vlan operation ether-type. | 1.3.6.1.4.1.6296.102.7.2.9.2.13 | Integer32 | read-write | current |
| sleV2VlanOperationControlIpProtocol OBJECT-TYPE The vlan operation IP Protocol | 1.3.6.1.4.1.6296.102.7.2.9.2.14 | Integer32 | read-write | current |
| sleV2VlanOperationControlArpSip OBJECT-TYPE The vlan operation source-IPaddress. | 1.3.6.1.4.1.6296.102.7.2.9.2.15 | OCTET STRING | read-write | current |
| sleV2VlanOperationControlArpSipPfxLen OBJECT-TYPE The vlan operation source-IPAddress prefix-length. | 1.3.6.1.4.1.6296.102.7.2.9.2.16 | Integer32 | read-write | current |
| sleV2VlanOperationControlSip OBJECT-TYPE The vlan operation Source-IPaddress. | 1.3.6.1.4.1.6296.102.7.2.9.2.17 | OCTET STRING | read-write | current |
| sleV2VlanOperationControlSipPfxLen OBJECT-TYPE The vlan operation Source-IPAddress prefix-length. | 1.3.6.1.4.1.6296.102.7.2.9.2.18 | Integer32 | read-write | current |
| sleV2VlanOperationControlDip OBJECT-TYPE The vlan operation Destination-IPaddress. | 1.3.6.1.4.1.6296.102.7.2.9.2.19 | OCTET STRING | read-write | current |
| sleV2VlanOperationControlDipPfxLen OBJECT-TYPE The vlan operation Destination-IPAddress prefix-length. | 1.3.6.1.4.1.6296.102.7.2.9.2.20 | Integer32 | read-write | current |
| sleV2VlanOperationControlAction OBJECT-TYPE The vlan-operation action types. | 1.3.6.1.4.1.6296.102.7.2.9.2.21 | INTEGER {addServiceVlanTag(1), replaceServiceVlanID(2), removeServiceVlanTag(3), addCustomerVlanTag(4), replaceCustomerVlanID(5), removeCustomerVlanTag(6)} | read-write | current |
| sleV2VlanOperationControlActionVid OBJECT-TYPE The vlan operation action-vid. | 1.3.6.1.4.1.6296.102.7.2.9.2.22 | Integer32 (1..4095) | read-write | current |
| sleV2VlanOperationNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.9.3 | |||
| sleV2EthernetService OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.10 | |||
| sleV2EthernetServiceBase OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.10.1 | |||
| sleV2EthernetServiceEnableStatus OBJECT-TYPE The ethernet service mode status. | 1.3.6.1.4.1.6296.102.7.2.10.1.1 | INTEGER {none(0), rt(1), cot(2)} | read-only | current |
| sleV2EthernetServiceEnableManagement OBJECT-TYPE The global management access status ( only in RT mode ) | 1.3.6.1.4.1.6296.102.7.2.10.1.2 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleV2EthernetServiceHealthCheckPort OBJECT-TYPE The health check port of uplink. ( only in COT mode ) | 1.3.6.1.4.1.6296.102.7.2.10.1.3 | OCTET STRING | read-only | current |
| sleV2EthernetServiceHealthCheckVid OBJECT-TYPE The health check vid of uplink. ( only in COT mode ) | 1.3.6.1.4.1.6296.102.7.2.10.1.4 | OCTET STRING | read-only | current |
| sleV2EthernetServiceTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.10.2 | not-accessible | current | |
| sleV2EthernetServiceEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.10.2.1 | not-accessible | current | |
| sleV2EthernetServiceSid OBJECT-TYPE The unique number is given by service identifier. | 1.3.6.1.4.1.6296.102.7.2.10.2.1.1 | INTEGER (1..65535) | read-only | current |
| sleV2EthernetServiceType OBJECT-TYPE The ethernet service type 1: unicast 2: multicast | 1.3.6.1.4.1.6296.102.7.2.10.2.1.2 | INTEGER {unicast(1), multicast(2)} | read-only | current |
| sleV2EthernetServiceRtCustomerPort OBJECT-TYPE The Configuring service's customer port for RT mode. | 1.3.6.1.4.1.6296.102.7.2.10.2.1.3 | OCTET STRING | read-only | current |
| sleV2EthernetServiceRtCustomerVid OBJECT-TYPE The Configuring service's customer vid for RT mode. | 1.3.6.1.4.1.6296.102.7.2.10.2.1.4 | OCTET STRING | read-only | current |
| sleV2EthernetServiceRtNetworkPort OBJECT-TYPE The Configuring service's network port for RT mode. | 1.3.6.1.4.1.6296.102.7.2.10.2.1.5 | OCTET STRING | read-only | current |
| sleV2EthernetServiceRtNetworkVid OBJECT-TYPE The Configuring service's network vid for RT mode. | 1.3.6.1.4.1.6296.102.7.2.10.2.1.6 | OCTET STRING | read-only | current |
| sleV2EthernetServiceRtEnableManagement OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.10.2.1.7 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleV2EthernetServiceCotExternalPort OBJECT-TYPE The Configuring service's external port for COT mode. | 1.3.6.1.4.1.6296.102.7.2.10.2.1.8 | OCTET STRING | read-only | current |
| sleV2EthernetServiceCotExternalVid OBJECT-TYPE The Configuring service's external vid for COT mode. | 1.3.6.1.4.1.6296.102.7.2.10.2.1.9 | OCTET STRING | read-only | current |
| sleV2EthernetServiceCotInternalPort OBJECT-TYPE The Configuring service's internal port for COT mode. | 1.3.6.1.4.1.6296.102.7.2.10.2.1.10 | OCTET STRING | read-only | current |
| sleV2EthernetServiceCotInternalVid OBJECT-TYPE The Configuring service's internal vid for COT mode. | 1.3.6.1.4.1.6296.102.7.2.10.2.1.11 | OCTET STRING | read-only | current |
| sleV2EthernetServiceControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.10.3 | |||
| sleV2EthernetServiceControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.102.7.2.10.3.1 | INTEGER {setEnableStatus(1), setEnableManagement(2), setHealthCheck(3), delHealthCheck(4), setSidForRT(5), setSidForCOT(6), delService(7)} | read-write | current |
| sleV2EthernetServiceControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.102.7.2.10.3.2 | SleControlStatusType | read-only | current |
| sleV2EthernetServiceControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.102.7.2.10.3.3 | Gauge32 | read-write | current |
| sleV2EthernetServiceControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.102.7.2.10.3.4 | TimeTicks | read-only | current |
| sleV2EthernetServiceControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.102.7.2.10.3.5 | SleControlRequestResultType | read-only | current |
| sleV2EthernetServiceControlEnableStatus OBJECT-TYPE The ethernet service mode status. | 1.3.6.1.4.1.6296.102.7.2.10.3.6 | INTEGER {none(0), rt(1), cot(2)} | read-write | current |
| sleV2EthernetServiceControlEnableManagement OBJECT-TYPE The local management access status ( only in RT mode ) | 1.3.6.1.4.1.6296.102.7.2.10.3.7 | INTEGER {enable(1), disable(2)} | read-write | current |
| sleV2EthernetServiceControlHealthCheckPort OBJECT-TYPE The health check port of uplink. ( only in COT mode ) | 1.3.6.1.4.1.6296.102.7.2.10.3.8 | OCTET STRING | read-write | current |
| sleV2EthernetServiceControlHealthCheckVid OBJECT-TYPE The health check vid of uplink. ( only in COT mode ) | 1.3.6.1.4.1.6296.102.7.2.10.3.9 | OCTET STRING | read-write | current |
| sleV2EthernetServiceControlSid OBJECT-TYPE The unique number is given by service identifier. | 1.3.6.1.4.1.6296.102.7.2.10.3.10 | INTEGER (1..65535) | read-write | current |
| sleV2EthernetServiceControlType OBJECT-TYPE The ethernet service type 1: unicast 2: multicast | 1.3.6.1.4.1.6296.102.7.2.10.3.11 | INTEGER {unicast(1), multicast(2)} | read-write | current |
| sleV2EthernetServiceControlRtCustomerPort OBJECT-TYPE The Configuring service's customer port for RT mode. | 1.3.6.1.4.1.6296.102.7.2.10.3.12 | OCTET STRING | read-write | current |
| sleV2EthernetServiceControlRtCustomerVid OBJECT-TYPE The Configuring service's customer vid for RT mode. | 1.3.6.1.4.1.6296.102.7.2.10.3.13 | OCTET STRING | read-write | current |
| sleV2EthernetServiceControlRtNetworkPort OBJECT-TYPE The Configuring service's network port for RT mode. | 1.3.6.1.4.1.6296.102.7.2.10.3.14 | OCTET STRING | read-write | current |
| sleV2EthernetServiceControlRtNetworkVid OBJECT-TYPE The Configuring service's network vid for RT mode. | 1.3.6.1.4.1.6296.102.7.2.10.3.15 | OCTET STRING | read-write | current |
| sleV2EthernetServiceControlRtEnableManagement OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.10.3.16 | INTEGER {enable(1), disable(2)} | read-write | current |
| sleV2EthernetServiceControlCotExternalPort OBJECT-TYPE The Configuring service's external port for COT mode. | 1.3.6.1.4.1.6296.102.7.2.10.3.17 | OCTET STRING | read-write | current |
| sleV2EthernetServiceControlCotExternalVid OBJECT-TYPE The Configuring service's external vid for COT mode. | 1.3.6.1.4.1.6296.102.7.2.10.3.18 | OCTET STRING | read-write | current |
| sleV2EthernetServiceControlCotInternalPort OBJECT-TYPE The Configuring service's internal port for COT mode. | 1.3.6.1.4.1.6296.102.7.2.10.3.19 | OCTET STRING | read-write | current |
| sleV2EthernetServiceControlCotInternalVid OBJECT-TYPE The Configuring service's internal vid for COT mode. | 1.3.6.1.4.1.6296.102.7.2.10.3.20 | OCTET STRING | read-write | current |
| sleV2EthernetServiceNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.2.10.4 | |||
| sleV2Security6 OBJECT-IDENTITY | 1.3.6.1.4.1.6296.102.7.3 |
Notifications
| Name | OID | Status |
|---|---|---|
| sleACLFlowCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.1 | current |
| sleACLFlowChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.2 | current |
| sleACLFlowDestroyed NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.3 | current |
| sleACLFlowAllDestroyed NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.4 | current |
| sleACLFlowExCreated NOTIFICATION-TYPE createACLFlowEx | 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.5 | current |
| sleACLFlowExChanged NOTIFICATION-TYPE setACLFlowEx | 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.6 | current |
| sleACLClassCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.3.1.3.1 | current |
| sleACLClassDestroyed NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.3.1.3.2 | current |
| sleACLClassAllDestroyed NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.3.1.3.3 | current |
| sleACLClassFlowAdded NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.3.2.3.1 | current |
| sleACLClassFlowDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.3.2.3.2 | current |
| sleACLClassFlowAllDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.3.2.3.3 | current |
| sleACLPolicyCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.1 | current |
| sleACLPolicyInfoChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.2 | current |
| sleACLPolicyMatchActionChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.3 | current |
| sleACLPolicyNomatchActionChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.4 | current |
| sleACLPolicyDestroyed NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.5 | current |
| sleACLPolicyFlowAdded NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.1 | current |
| sleACLPolicyFlowDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.2 | current |
| sleACLPolicyAllFlowDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.3 | current |
| sleACLPolicyAllClassDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.4 | current |
| sleACLPolicyAllFlowClassDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.5 | current |
| sleV2Security4ACLGroupIfProfileAdd NOTIFICATION-TYPE setSecurityACLGroupIfProfile | 1.3.6.1.4.1.6296.102.7.2.5.5.1.3.1 | current |
| sleV2Security4ACLGroupIfProfileDelete NOTIFICATION-TYPE delSecurityACLGroupIfProfile | 1.3.6.1.4.1.6296.102.7.2.5.5.1.3.2 | current |
| sleSACLCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.6.3.1 | current |
| sleSACLDestroyed NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.6.3.2 | current |
| sleSACLAllDestroyed NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.6.3.3 | current |
| sleV2SecurityACLStatisticsSyslogModeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.7.1.3.1 | current |
| sleV2SecurityACLStatisticsCleared NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.7.2.4.1 | current |
| sleV2CpuPacketFilterAdded NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.8.4.1 | current |
| sleV2CpuPacketFilterDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.8.4.2 | current |
| sleV2CpuPacketFilterActionChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.8.4.3 | current |
| sleV2CpuPacketFilterMatchChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.102.7.2.8.4.4 | current |
| sleV2VlanOperationCreated NOTIFICATION-TYPE addVlanOperation | 1.3.6.1.4.1.6296.102.7.2.9.3.1 | current |
| sleV2VlanOperationDeleted NOTIFICATION-TYPE delVlanOperation | 1.3.6.1.4.1.6296.102.7.2.9.3.2 | current |
| sleV2EthernetServiceEnableStatusChanged NOTIFICATION-TYPE setEnableStatus | 1.3.6.1.4.1.6296.102.7.2.10.4.1 | current |
| sleV2EthernetServiceEnableManagementChanged NOTIFICATION-TYPE setEnableManagement | 1.3.6.1.4.1.6296.102.7.2.10.4.2 | current |
| sleV2EthernetServiceHealthCheckChanged NOTIFICATION-TYPE setHealthCheck | 1.3.6.1.4.1.6296.102.7.2.10.4.3 | current |
| sleV2EthernetServiceHealthCheckDeleted NOTIFICATION-TYPE delHealthCheck | 1.3.6.1.4.1.6296.102.7.2.10.4.4 | current |
| sleV2EthernetServiceSidForRtModeCreated NOTIFICATION-TYPE setSidForRT | 1.3.6.1.4.1.6296.102.7.2.10.4.5 | current |
| sleV2EthernetServiceSidForCotModeCreated NOTIFICATION-TYPE setSidForCOT | 1.3.6.1.4.1.6296.102.7.2.10.4.6 | current |
| sleV2EthernetServiceSidDeleted NOTIFICATION-TYPE delService | 1.3.6.1.4.1.6296.102.7.2.10.4.7 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| sleV2SecurityGroup OBJECT-GROUP Description. | 1.3.6.1.4.1.6296.102.7.4 | current |
| sleV2SecurityNotificationGroup NOTIFICATION-GROUP Description. | 1.3.6.1.4.1.6296.102.7.5 | current |