MIBs Depot

SLEV2-QOS-MIB

Registered at
1.3.6.1.4.1.6296.102.10
Last updated
2006-05-05 14:06
Organization
Organization.
Namespace
dasan
Source file
SLEV2-QOS-MIB
Digest
sha256:2b045099a075e750655e6318445636d1bba019dcf2f2bfa1e37722d962206994

Description

sleV2QoS

Contact

Contact-info.

Imports

FromSymbols
DASAN-SMIsleV2Mgmt
IF-MIBInterfaceIndex
INET-ADDRESS-MIBInetAddress, InetAddressPrefixLength, InetAddressType
SLE-TC-MIBSleControlRequestResultType, SleControlStatusType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIBITS, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso
SNMPv2-TCDisplayString, MacAddress, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DASAN-SMI
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SLE-TC-MIB
SLEV2-QOS-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
Int8021p
type
IntAvrgCounterMode
type
IntClassIndex
type
IntCoS
type
IntColorAction
type
IntColorAwareMode
type
IntColorCBS
type
IntColorCIR
type
IntColorEBS
type
IntColorIndex
type
IntColorMode
type
IntColorPBS
type
IntColorPIR
type
IntColorType
type
IntCounterMode
type
IntDP
type
IntDSCPIndex
type
IntDscp
type
IntDstMacOrEgressPorts
type
IntEnableFlag
type
IntEthernetType
type
IntFlowClass
type
IntFlowIndex
type
IntFlowOrClass
type
IntIcmpCode
type
IntIcmpType
type
IntInterfaceIndex
type
IntInternetProtocolFlag
type
IntIpAddrMask
type
IntIpPktPriorityType
type
IntIpPrecedence
type
IntL2BaseRemarkMode
type
IntL4Port
type
IntMarkMode
type
IntMeterMode
type
IntPktLen
type
IntPolicerIndex
type
IntPolicyIndex
type
IntProtocolType
type
IntQueue
type
IntQueueCoSIndex
type
IntRulePriority
type
IntToS
type
IntVlanID
type
MacAddressMask
TEXTUAL-CONVENTION
Represents Mac address Mask.
current
OctetName
type

Objects

NameOIDSyntaxAccessStatus
sleV2QoSBase
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.1
sleV2QoS4
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2
sleV2QoS4Base
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.1
sleV2QoS4BaseInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.1.1
sleV2QoS4BaseFlowMode
OBJECT-TYPE
flow mode default : double mode, extension : triple mode
1.3.6.1.4.1.6296.102.10.2.1.1.1INTEGER {default(1), extension(2)}read-onlycurrent
sleV2QoS4BaseControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.1.2
sleV2QoS4BaseControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.102.10.2.1.2.1INTEGER {setFlowMode(1)}read-writecurrent
sleV2QoS4BaseControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.102.10.2.1.2.2SleControlStatusTyperead-onlycurrent
sleV2QoS4BaseControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.1.2.3Gauge32read-writecurrent
sleV2QoS4BaseControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.1.2.4TimeTicksread-onlycurrent
sleV2QoS4BaseControlResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.102.10.2.1.2.5SleControlRequestResultTyperead-onlycurrent
sleV2QoS4BaseControlFlowMode
OBJECT-TYPE
flow mode default : double mode, extension : triple
1.3.6.1.4.1.6296.102.10.2.1.2.6INTEGER {default(1), extension(2)}read-writecurrent
sleV2QoS4BaseNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.1.3
sleV2QoS4Flow
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.2
sleV2QoS4FlowInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.2.1
sleV2QoS4FlowTable
OBJECT-TYPE
flow table.
1.3.6.1.4.1.6296.102.10.2.2.1.1not-accessiblecurrent
sleV2QoS4FlowEntry
OBJECT-TYPE
key: sleV2QoS4FlowIndex
1.3.6.1.4.1.6296.102.10.2.2.1.1.1not-accessiblecurrent
sleV2QoS4FlowIndex
OBJECT-TYPE
The index of flow
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.1INTEGER (1..1024)read-onlycurrent
sleV2QoS4FlowName
OBJECT-TYPE
The name of flow
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.2OctetNameread-onlycurrent
sleV2QoS4FlowEthernetType
OBJECT-TYPE
The ethernet type value in incoming frames The value of -1 means any(not set).
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.3IntEthernetTyperead-onlycurrent
sleV2QoS4FlowSrcMacAddr
OBJECT-TYPE
The source mac address The value of 00:00:00:00:00:00 is any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.4MacAddressread-onlycurrent
sleV2QoS4FlowSrcMacAddrMask
OBJECT-TYPE
The mask of the source mac address The value of 00:00:00:00:00:00 is any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.5MacAddressMaskread-onlycurrent
sleV2QoS4FlowDstMacAddr
OBJECT-TYPE
The destination mac address The value of 00:00:00:00:00:00 is any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.6MacAddressread-onlycurrent
sleV2QoS4FlowDstMacAddrMask
OBJECT-TYPE
The mask of the destination mac address The value of 00:00:00:00:00:00 is any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.7MacAddressMaskread-onlycurrent
sleV2QoS4Flow8021p
OBJECT-TYPE
The value of the IEEE802.1p priority in the packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.8Int8021pread-onlycurrent
sleV2QoS4FlowSrcIpAddr
OBJECT-TYPE
The IP address to match against the packet's source IP address. The value of 0.0.0.0 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.9IpAddressread-onlycurrent
sleV2QoS4FlowSrcIpAddrMask
OBJECT-TYPE
The mask of source IP address The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.10IntIpAddrMaskread-onlycurrent
sleV2QoS4FlowDstIpAddr
OBJECT-TYPE
The IP address to match against the packet's destination IP address. The value of 0.0.0.0 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.11IpAddressread-onlycurrent
sleV2QoS4FlowDstIpAddrMask
OBJECT-TYPE
The mask of destination IP address The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.12IntIpAddrMaskread-onlycurrent
sleV2QoS4FlowIpPktPriorityType
OBJECT-TYPE
The Priority type of incoming IP packet (specify a type of sleUserFlowIpPktPriority)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.13IntIpPktPriorityTyperead-onlycurrent
sleV2QoS4FlowIpPktPriority
OBJECT-TYPE
The Priority value of incoming IP packet If type is 1, this value's range is 0-7. If type is 2, this value's range is 0-63. If type is 3, this value's range is 0-255.
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.14Integer32read-onlycurrent
sleV2QoS4FlowPktLen
OBJECT-TYPE
The packet length of the incoming packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.15IntPktLenread-onlycurrent
sleV2QoS4FlowProtocolType
OBJECT-TYPE
The type of IP protocol The flat internet protocol is from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode If the value is tcp(6), From sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowTcpFlag value is available If the value is udp(17), From sleV2QoS4FlowUdpSrcStartPort to sleV2QoS4FlowUdpDstEndPort value is available If the value is icmp(1), The value of sleV2QoS4FlowIcmpType and sleV2QoS4FlowIcmpCode is available The value of -1 means any(not set) Otherwise, from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode value is not available The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.16IntProtocolTyperead-onlycurrent
sleV2QoS4FlowTcpSrcStartPort
OBJECT-TYPE
The start source port in range of source port in TCP packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.17IntL4Portread-onlycurrent
sleV2QoS4FlowTcpSrcEndPort
OBJECT-TYPE
The end source port in range of source port in TCP packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.18IntL4Portread-onlycurrent
sleV2QoS4FlowTcpDstStartPort
OBJECT-TYPE
The start destination port in range of source port in TCP packet. The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.19IntL4Portread-onlycurrent
sleV2QoS4FlowTcpDstEndPort
OBJECT-TYPE
The end destination port in range of destination port in TCP packet. The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.20IntL4Portread-onlycurrent
sleV2QoS4FlowTcpFlag
OBJECT-TYPE
The flag in TCP packet
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.21Bits {reserv0(0), reserv1(1), urg(2), ack(3), psh(4), rst(5), syn(6), fin(7)}read-onlycurrent
sleV2QoS4FlowUdpSrcStartPort
OBJECT-TYPE
The start source port in range of source port in UDP packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.22IntL4Portread-onlycurrent
sleV2QoS4FlowUdpSrcEndPort
OBJECT-TYPE
The end source port in range of source port in UDP packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.23IntL4Portread-onlycurrent
sleV2QoS4FlowUdpDstStartPort
OBJECT-TYPE
The start destination port in range of destination port in UDP packet. The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.24IntL4Portread-onlycurrent
sleV2QoS4FlowUdpDstEndPort
OBJECT-TYPE
The end destination port in range of destination port in UDP packet. The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.25IntL4Portread-onlycurrent
sleV2QoS4FlowIcmpType
OBJECT-TYPE
The type of ICMP message The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.26IntIcmpTyperead-onlycurrent
sleV2QoS4FlowIcmpCode
OBJECT-TYPE
The code of ICMP message The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.27IntIcmpCoderead-onlycurrent
sleV2QoS4FlowHdrlen
OBJECT-TYPE
The IP header length. The value of 0 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.28INTEGER (0 | 1..15)read-onlycurrent
sleV2QoS4FlowHdrError
OBJECT-TYPE
The IP header error check
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.29IntEnableFlagread-onlycurrent
sleV2QoS4FlowInnerVlan
OBJECT-TYPE
The index of inner vlan. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.30Integer32 (1..4094)read-onlycurrent
sleV2QoS4FlowInner8021p
OBJECT-TYPE
The value of the Inner IEEE802.1p priority in the packet. The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.31Integer32 (0..7)read-onlycurrent
sleV2QoS4FlowMacFlag
OBJECT-TYPE
The any flag of mac address
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.32INTEGER {none(0), srcAny(1), dstAny(2), srcDstAny(3)}read-onlycurrent
sleV2QoS4FlowIpFlag
OBJECT-TYPE
The any flag of IP address.
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.33INTEGER {none(0), srcAny(1), dstAny(2), srcDstAny(3)}read-onlycurrent
sleV2QoS4FlowMacDlf
OBJECT-TYPE
The destination mac address is found or not.
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.34INTEGER {none(0), dstFound(1), dstNotFound(2)}read-onlycurrent
sleV2QoS4FlowTagType
OBJECT-TYPE
The packet tag type
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.35INTEGER {untag(1), custom(2), service(3), both(4)}read-onlycurrent
sleV2QoS4FlowInPktTagVid
OBJECT-TYPE
VID, 4095 : any
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.36Integer32 (1..4094 | 4095)read-onlycurrent
sleV2QoS4FlowInPktTagCfi
OBJECT-TYPE
CFI, 255:any
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.37Integer32 (0..1 | 255)read-onlycurrent
sleV2QoS4FlowInPktTagCoS
OBJECT-TYPE
802.1p, 255:any
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.38Integer32 (0..7 | 255)read-onlycurrent
sleV2QoS4FlowOutPktTagVid
OBJECT-TYPE
VID, 4095 : any
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.39Integer32 (1..4094 | 4095)read-onlycurrent
sleV2QoS4FlowOutPktTagCfi
OBJECT-TYPE
CFI, 255:any
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.40Integer32 (0..1 | 255)read-onlycurrent
sleV2QoS4FlowOutPktTagCoS
OBJECT-TYPE
802.1p, 255:any
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.41Integer32 (0..7 | 255)read-onlycurrent
sleV2QoS4FlowFlowAlias
OBJECT-TYPE
flow alias
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.42OCTET STRINGread-onlycurrent
sleV2QoSFlowInetAddrType
OBJECT-TYPE
IP address type
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.43InetAddressTyperead-onlycurrent
sleV2QoSFlowSrcInetAddr
OBJECT-TYPE
The IP address to match against the packet's source IP address.
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.44InetAddressread-onlycurrent
sleV2QoSFlowDstInetAddr
OBJECT-TYPE
The IP address to match against the packet's destination IP address.
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.45InetAddressread-onlycurrent
sleV2QoSFlowSrcInetAddrLen
OBJECT-TYPE
The prefix length of source IP address
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.46InetAddressPrefixLengthread-onlycurrent
sleV2QoSFlowDstInetAddrLen
OBJECT-TYPE
The prefix length of destination IP address
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.47InetAddressPrefixLengthread-onlycurrent
sleV2QoSFlowTrafficClass
OBJECT-TYPE
The traffic class of IPv6 header The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.48INTEGER (-1 | 0..255)read-onlycurrent
sleV2QoSFlowFlowLabel
OBJECT-TYPE
The flow label of IPv6 header The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.49INTEGER (-1 | 0..65535)read-onlycurrent
sleV2QoS4FlowOuterVlan
OBJECT-TYPE
The index of outer vlan The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.50Integer32 (-1 | 0..4094)read-onlycurrent
sleV2QoS4FlowOuter8021p
OBJECT-TYPE
The value of the outer IEEE802.1p priority in the packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.51Integer32 (-1 | 0..7)read-onlycurrent
sleV2QoS4FlowOnuCircuitId
OBJECT-TYPE
The value of the Onu Circuit-id The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.52Integer32 (-1 | 1..50000 | 50002 | 50003 | 50004 | 51002)read-onlycurrent
sleV2QoS4FlowControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.2.1.2
sleV2QoS4FlowControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.102.10.2.2.1.2.1INTEGER {createFlow(1), modifyFlow(2), destroyFlow(3), destroyAllFlow(4), setInPktTag(5), setOutPktTag(6), setFlowAlias(7), createFlowEx(8), setFlowEx(9)}read-writecurrent
sleV2QoS4FlowControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.102.10.2.2.1.2.2SleControlStatusTyperead-onlycurrent
sleV2QoS4FlowControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.2.1.2.3Gauge32read-writecurrent
sleV2QoS4FlowControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.2.1.2.4TimeTicksread-onlycurrent
sleV2QoS4FlowControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.102.10.2.2.1.2.5SleControlRequestResultTyperead-onlycurrent
sleV2QoS4FlowControlIndex
OBJECT-TYPE
The index of flow
1.3.6.1.4.1.6296.102.10.2.2.1.2.6IntFlowIndexread-writecurrent
sleV2QoS4FlowControlName
OBJECT-TYPE
The name of flow
1.3.6.1.4.1.6296.102.10.2.2.1.2.7OctetNameread-writecurrent
sleV2QoS4FlowControlEthernetType
OBJECT-TYPE
The ethernet type value in incoming frames The value of -1 means any(not set).
1.3.6.1.4.1.6296.102.10.2.2.1.2.8IntEthernetTyperead-writecurrent
sleV2QoS4FlowControlSrcMacAddr
OBJECT-TYPE
The source mac address The value of 00:00:00:00:00:00 is any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.9MacAddressread-writecurrent
sleV2QoS4FlowControlSrcMacAddrMask
OBJECT-TYPE
The mask of the source mac address The value of 00:00:00:00:00:00 is any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.10MacAddressMaskread-writecurrent
sleV2QoS4FlowControlDstMacAddr
OBJECT-TYPE
The destination mac address The value of 00:00:00:00:00:00 is any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.11MacAddressread-writecurrent
sleV2QoS4FlowControlDstMacAddrMask
OBJECT-TYPE
The mask of the destination mac address The value of 00:00:00:00:00:00 is any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.12MacAddressMaskread-writecurrent
sleV2QoS4FlowControl8021p
OBJECT-TYPE
The value of the IEEE802.1p priority in the packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.13Int8021pread-writecurrent
sleV2QoS4FlowControlSrcIpAddr
OBJECT-TYPE
The IP address to match against the packet's source IP address. The value of 0.0.0.0 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.14IpAddressread-writecurrent
sleV2QoS4FlowControlSrcIpAddrMask
OBJECT-TYPE
The mask of source IP address The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.15IntIpAddrMaskread-writecurrent
sleV2QoS4FlowControlDstIpAddr
OBJECT-TYPE
The IP address to match against the packet's destination IP address. The value of 0.0.0.0 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.16IpAddressread-writecurrent
sleV2QoS4FlowControlDstIpAddrMask
OBJECT-TYPE
The mask of destination IP address The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.17IntIpAddrMaskread-writecurrent
sleV2QoS4FlowControlIpPktPriorityType
OBJECT-TYPE
The Priority type of incoming IP packet (specify a type of sleUserFlowIpPktPriority) The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.18IntIpPktPriorityTyperead-writecurrent
sleV2QoS4FlowControlIpPktPriority
OBJECT-TYPE
The Priority value of incoming IP packet If type is 1, this value's range is 0-7. If type is 2, this value's range is 0-63. If type is 3, this value's range is 0-255. The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.19Integer32read-writecurrent
sleV2QoS4FlowControlPktLen
OBJECT-TYPE
The packet length of the incoming packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.20IntPktLenread-writecurrent
sleV2QoS4FlowControlProtocolType
OBJECT-TYPE
The type of IP protocol The flat internet protocol is from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode If the value is tcp(6), From sleV2QoS4FlowControlTcpSrcStartPort to sleV2QoS4FlowControlTcpFlag value is available If the value is udp(17), From sleV2QoS4FlowControlUdpSrcStartPort to sleV2QoS4FlowControlUdpDstEndPort value is available If the value is icmp(1), The value of sleV2QoS4FlowControlIcmpType and sleV2QoS4FlowControlIcmpCode is available The value of -1 means any(not set) Otherwise, from sleV2QoS4FlowControlTcpSrcStartPort to sleV2QoS4FlowControlIcmpCode value is not available The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.21IntProtocolTyperead-writecurrent
sleV2QoS4FlowControlTcpSrcStartPort
OBJECT-TYPE
The start source port in range of source port in TCP packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.22IntL4Portread-writecurrent
sleV2QoS4FlowControlTcpSrcEndPort
OBJECT-TYPE
The end source port in range of source port in TCP packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.23IntL4Portread-writecurrent
sleV2QoS4FlowControlTcpDstStartPort
OBJECT-TYPE
The start destination port in range of source port in TCP packet. The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.24IntL4Portread-writecurrent
sleV2QoS4FlowControlTcpDstEndPort
OBJECT-TYPE
The end destination port in range of destination port in TCP packet. The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.25IntL4Portread-writecurrent
sleV2QoS4FlowControlTcpFlag
OBJECT-TYPE
The flag in TCP packet
1.3.6.1.4.1.6296.102.10.2.2.1.2.26Bits {reserv0(0), reserv1(1), urg(2), ack(3), psh(4), rst(5), syn(6), fin(7)}read-writecurrent
sleV2QoS4FlowControlUdpSrcStartPort
OBJECT-TYPE
The start source port in range of source port in UDP packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.27IntL4Portread-writecurrent
sleV2QoS4FlowControlUdpSrcEndPort
OBJECT-TYPE
The end source port in range of source port in UDP packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.28IntL4Portread-writecurrent
sleV2QoS4FlowControlUdpDstStartPort
OBJECT-TYPE
The start destination port in range of destination port in UDP packet. The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.29IntL4Portread-writecurrent
sleV2QoS4FlowControlUdpDstEndPort
OBJECT-TYPE
The end destination port in range of destination port in UDP packet. The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.30IntL4Portread-writecurrent
sleV2QoS4FlowControlIcmpType
OBJECT-TYPE
The type of ICMP message The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.31IntIcmpTyperead-writecurrent
sleV2QoS4FlowControlIcmpCode
OBJECT-TYPE
The code of ICMP message The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.32IntIcmpCoderead-writecurrent
sleV2QoS4FlowControlHdrlen
OBJECT-TYPE
The IP header error check
1.3.6.1.4.1.6296.102.10.2.2.1.2.33INTEGER (0 | 1..15)read-writecurrent
sleV2QoS4FlowControlHdrError
OBJECT-TYPE
The IP header error check
1.3.6.1.4.1.6296.102.10.2.2.1.2.34IntEnableFlagread-writecurrent
sleV2QoS4FlowControlInnerVlan
OBJECT-TYPE
The index of inner vlan. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.35Integer32 (1..4094)read-writecurrent
sleV2QoS4FlowControlInner8021p
OBJECT-TYPE
The value of the Inner IEEE802.1p priority in the packet. The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.36Integer32 (0..7)read-writecurrent
sleV2QoS4FlowControlMacFlag
OBJECT-TYPE
The any flag of mac address
1.3.6.1.4.1.6296.102.10.2.2.1.2.37INTEGER {none(0), srcAny(1), dstAny(2), srcDstAny(3)}read-writecurrent
sleV2QoS4FlowControlIpFlag
OBJECT-TYPE
The any flag of IP address.
1.3.6.1.4.1.6296.102.10.2.2.1.2.38INTEGER {none(0), srcAny(1), dstAny(2), srcDstAny(3)}read-writecurrent
sleV2QoS4FlowControlMacDlf
OBJECT-TYPE
The destination MAC address found or not
1.3.6.1.4.1.6296.102.10.2.2.1.2.39INTEGER {none(0), dstFound(1), dstNotFound(2)}read-writecurrent
sleV2QoS4FlowControlTagType
OBJECT-TYPE
The packet tag type
1.3.6.1.4.1.6296.102.10.2.2.1.2.40INTEGER {untag(1), custom(2), service(3), both(4)}read-writecurrent
sleV2QoS4FlowControlPktTagVid
OBJECT-TYPE
VID, 4095 : any All VID, CFI, CoS are -1 : clear command
1.3.6.1.4.1.6296.102.10.2.2.1.2.41Integer32 (-1 | 1..4094 | 4095)read-onlycurrent
sleV2QoS4FlowControlPktTagCfi
OBJECT-TYPE
CFI, 255:any All VID, CFI, CoS are -1 : clear command
1.3.6.1.4.1.6296.102.10.2.2.1.2.42Integer32 (-1 | 0..1 | 255)read-onlycurrent
sleV2QoS4FlowControlPktTagCoS
OBJECT-TYPE
802.1p, 255:any All VID, CFI, CoS are -1 : clear command
1.3.6.1.4.1.6296.102.10.2.2.1.2.43Integer32 (-1 | 0..7 | 255)read-onlycurrent
sleV2QoS4FlowControlFlowAlias
OBJECT-TYPE
flow alias
1.3.6.1.4.1.6296.102.10.2.2.1.2.44OCTET STRINGread-onlycurrent
sleV2QoSFlowControlInetAddrType
OBJECT-TYPE
IP address type
1.3.6.1.4.1.6296.102.10.2.2.1.2.45InetAddressTyperead-onlycurrent
sleV2QoSFlowControlSrcInetAddr
OBJECT-TYPE
The IP address to match against the packet's source IP address.
1.3.6.1.4.1.6296.102.10.2.2.1.2.46InetAddressread-onlycurrent
sleV2QoSFlowControlDstInetAddr
OBJECT-TYPE
The IP address to match against the packet's destination IP address.
1.3.6.1.4.1.6296.102.10.2.2.1.2.47InetAddressread-onlycurrent
sleV2QoSFlowControlSrcInetAddrLen
OBJECT-TYPE
The prefix length of source IP address
1.3.6.1.4.1.6296.102.10.2.2.1.2.48InetAddressPrefixLengthread-onlycurrent
sleV2QoSFlowControlDstInetAddrLen
OBJECT-TYPE
The prefix length of destination IP address
1.3.6.1.4.1.6296.102.10.2.2.1.2.49InetAddressPrefixLengthread-onlycurrent
sleV2QoSFlowControlTrafficClass
OBJECT-TYPE
The traffic class of IPv6 header The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.50INTEGER (-1 | 0..255)read-writecurrent
sleV2QoSFlowControlFlowLabel
OBJECT-TYPE
The flow label of IPv6 header The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.51INTEGER (-1 | 0..65535)read-writecurrent
sleV2QoS4FlowControlOuterVlan
OBJECT-TYPE
The index of outer vlan The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.52Integer32 (-1 | 1..4094)read-writecurrent
sleV2QoS4FlowControlOuter8021p
OBJECT-TYPE
The value of the outer IEEE802.1p priority in the packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.53Integer32 (-1 | 0..7)read-writecurrent
sleV2QoS4FlowControlOnuCircuitId
OBJECT-TYPE
The value of the Onu Circuit-id The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.54Integer32 (-1 | 1..5000 | 50002 | 50003 | 50004 | 51002)read-writecurrent
sleV2QoS4FlowNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.2.1.3
sleV2QoS4FlowClass
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.2.2
sleV2QoS4FlowClassTable
OBJECT-TYPE
flow class table.
1.3.6.1.4.1.6296.102.10.2.2.2.1not-accessiblecurrent
sleV2QoS4FlowClassEntry
OBJECT-TYPE
key: sleV2QoS4FlowIndex, sleV2QoS4FlowClassIndex
1.3.6.1.4.1.6296.102.10.2.2.2.1.1not-accessiblecurrent
sleV2QoS4FlowClassIndex
OBJECT-TYPE
The index of the class for the flow
1.3.6.1.4.1.6296.102.10.2.2.2.1.1.1IntClassIndexread-onlycurrent
sleV2QoS4FlowClassID
OBJECT-TYPE
The identifier of the class
1.3.6.1.4.1.6296.102.10.2.2.2.1.1.2IntClassIndexread-onlycurrent
sleV2QoS4FlowClassName
OBJECT-TYPE
The name of the class
1.3.6.1.4.1.6296.102.10.2.2.2.1.1.3OctetNameread-onlycurrent
sleV2QoS4FlowPolicy
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.2.3
sleV2QoS4FlowPolicyTable
OBJECT-TYPE
flow policy table.
1.3.6.1.4.1.6296.102.10.2.2.3.1not-accessiblecurrent
sleV2QoS4FlowPolicyEntry
OBJECT-TYPE
key: sleV2QoS4FlowIndex, sleV2QoS4FlowPolicyIndex
1.3.6.1.4.1.6296.102.10.2.2.3.1.1not-accessiblecurrent
sleV2QoS4FlowPolicyIndex
OBJECT-TYPE
The index of the policy for the flow
1.3.6.1.4.1.6296.102.10.2.2.3.1.1.1IntPolicyIndexread-onlycurrent
sleV2QoS4FlowPolicyID
OBJECT-TYPE
The identifier of the policy
1.3.6.1.4.1.6296.102.10.2.2.3.1.1.2IntPolicyIndexread-onlycurrent
sleV2QoS4FlowPolicyName
OBJECT-TYPE
The name of the policy
1.3.6.1.4.1.6296.102.10.2.2.3.1.1.3OctetNameread-onlycurrent
sleV2QoS4Class
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.3
sleV2QoS4ClassInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.3.1
sleV2QoS4ClassTable
OBJECT-TYPE
class table.
1.3.6.1.4.1.6296.102.10.2.3.1.1not-accessiblecurrent
sleV2QoS4ClassEntry
OBJECT-TYPE
key: sleV2QoS4ClassIndex
1.3.6.1.4.1.6296.102.10.2.3.1.1.1not-accessiblecurrent
sleV2QoS4ClassIndex
OBJECT-TYPE
The index of class
1.3.6.1.4.1.6296.102.10.2.3.1.1.1.1IntClassIndexread-onlycurrent
sleV2QoS4ClassName
OBJECT-TYPE
The name of class
1.3.6.1.4.1.6296.102.10.2.3.1.1.1.2OctetNameread-onlycurrent
sleV2QoS4ClassFlowCnt
OBJECT-TYPE
The counter of flow in class
1.3.6.1.4.1.6296.102.10.2.3.1.1.1.3Counter32read-onlycurrent
sleV2QoS4ClassControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.3.1.2
sleV2QoS4ClassControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.102.10.2.3.1.2.1INTEGER {createClass(1), destroyClass(2), destroyAllClass(3)}read-writecurrent
sleV2QoS4ClassControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.102.10.2.3.1.2.2SleControlStatusTyperead-onlycurrent
sleV2QoS4ClassControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.3.1.2.3Gauge32read-writecurrent
sleV2QoS4ClassControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.3.1.2.4TimeTicksread-onlycurrent
sleV2QoS4ClassControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.102.10.2.3.1.2.5SleControlRequestResultTyperead-onlycurrent
sleV2QoS4ClassControlIndex
OBJECT-TYPE
The index of class
1.3.6.1.4.1.6296.102.10.2.3.1.2.6IntClassIndexread-writecurrent
sleV2QoS4ClassControlName
OBJECT-TYPE
The name of class
1.3.6.1.4.1.6296.102.10.2.3.1.2.7OctetNameread-writecurrent
sleV2QoS4ClassNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.3.1.3
sleV2QoS4ClassFlow
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.3.2
sleV2QoS4ClassFlowTable
OBJECT-TYPE
class flow table.
1.3.6.1.4.1.6296.102.10.2.3.2.1not-accessiblecurrent
sleV2QoS4ClassFlowEntry
OBJECT-TYPE
key: sleV2QoS4ClassIndex, sleV2QoS4ClassFlowIndex
1.3.6.1.4.1.6296.102.10.2.3.2.1.1not-accessiblecurrent
sleV2QoS4ClassFlowIndex
OBJECT-TYPE
The index of flow in class
1.3.6.1.4.1.6296.102.10.2.3.2.1.1.1IntFlowIndexread-onlycurrent
sleV2QoS4ClassFlowID
OBJECT-TYPE
The identifier of flow
1.3.6.1.4.1.6296.102.10.2.3.2.1.1.2IntFlowIndexread-onlycurrent
sleV2QoS4ClassFlowName
OBJECT-TYPE
The name of the flow
1.3.6.1.4.1.6296.102.10.2.3.2.1.1.3OctetNameread-onlycurrent
sleV2QoS4ClassFlowClassName
OBJECT-TYPE
The class name of the flow
1.3.6.1.4.1.6296.102.10.2.3.2.1.1.4OctetNameread-onlycurrent
sleV2QoS4ClassFlowControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.3.2.2
sleV2QoS4ClassFlowControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.102.10.2.3.2.2.1INTEGER {addFlow(1), deleteFlow(2), deleteAllFlow(3)}read-writecurrent
sleV2QoS4ClassFlowControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.102.10.2.3.2.2.2SleControlStatusTyperead-onlycurrent
sleV2QoS4ClassFlowControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.3.2.2.3Gauge32read-writecurrent
sleV2QoS4ClassFlowControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.3.2.2.4TimeTicksread-onlycurrent
sleV2QoS4ClassFlowControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.102.10.2.3.2.2.5SleControlRequestResultTyperead-onlycurrent
sleV2QoS4ClassFlowControlClassIndex
OBJECT-TYPE
The index of class
1.3.6.1.4.1.6296.102.10.2.3.2.2.6IntClassIndexread-writecurrent
sleV2QoS4ClassFlowControlFlowIndex
OBJECT-TYPE
The index of flow in this class
1.3.6.1.4.1.6296.102.10.2.3.2.2.7IntFlowIndexread-writecurrent
sleV2QoS4ClassFlowControlFlowID
OBJECT-TYPE
The index of flow Refer to sleV2QoS4FlowIndex
1.3.6.1.4.1.6296.102.10.2.3.2.2.8IntFlowIndexread-writecurrent
sleV2QoS4ClassFlowControlClassName
OBJECT-TYPE
The class name of class-flow
1.3.6.1.4.1.6296.102.10.2.3.2.2.9OctetNameread-writecurrent
sleV2QoS4ClassFlowNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.3.2.3
sleV2QoS4ClassPolicy
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.3.3
sleV2QoS4ClassPolicyTable
OBJECT-TYPE
class policy table.
1.3.6.1.4.1.6296.102.10.2.3.3.1not-accessiblecurrent
sleV2QoS4ClassPolicyEntry
OBJECT-TYPE
key: sleV2QoS4ClassIndex, sleV2QoS4ClassPolicyIndex
1.3.6.1.4.1.6296.102.10.2.3.3.1.1not-accessiblecurrent
sleV2QoS4ClassPolicyIndex
OBJECT-TYPE
The index of the policy for the class
1.3.6.1.4.1.6296.102.10.2.3.3.1.1.1IntPolicyIndexread-onlycurrent
sleV2QoS4ClassPolicyID
OBJECT-TYPE
The identifier of the policy
1.3.6.1.4.1.6296.102.10.2.3.3.1.1.2IntPolicyIndexread-onlycurrent
sleV2QoS4ClassPolicyName
OBJECT-TYPE
The name of the policy
1.3.6.1.4.1.6296.102.10.2.3.3.1.1.3OctetNameread-onlycurrent
sleV2QoS4Policer
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.4
sleV2QoS4PolicerInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.4.1
sleV2QoS4PolicerTable
OBJECT-TYPE
policer table.
1.3.6.1.4.1.6296.102.10.2.4.1.1not-accessiblecurrent
sleV2QoS4PolicerEntry
OBJECT-TYPE
key: sleV2QoS4PolicerIndex
1.3.6.1.4.1.6296.102.10.2.4.1.1.1not-accessiblecurrent
sleV2QoS4PolicerIndex
OBJECT-TYPE
The index of policer
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.1IntPolicerIndexread-onlycurrent
sleV2QoS4PolicerName
OBJECT-TYPE
The name of policer
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.2OctetNameread-onlycurrent
sleV2QoS4PolicerMeterMode
OBJECT-TYPE
The meter mode. *) According to this value, rate-limit, color-marking and min-max-bandwidth exclusively activated. The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.3IntMeterModeread-onlycurrent
sleV2QoS4PolicerRateLimit
OBJECT-TYPE
The packet rate limit The value of -1 unlimit(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.4Integer32read-writecurrent
sleV2QoS4PolicerColorType
OBJECT-TYPE
Color marking type Available Value : srTCM or trTCM srTCM = Single Rate Three Color Marking trTCM = Two Rate Three Color Marking The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.5IntColorTyperead-onlycurrent
sleV2QoS4PolicerColorMode
OBJECT-TYPE
Color marking mode. The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.6IntColorModeread-onlycurrent
sleV2QoS4PolicerColorAwareMode
OBJECT-TYPE
Color marking aware mode *) Used only when sleV2QoS4PolicerColorMode is aware The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.7IntColorAwareModeread-onlycurrent
sleV2QoS4PolicerColorCIR
OBJECT-TYPE
Committed Information Rate. The value is in unit for 64 kbps. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.8IntColorCIRread-onlycurrent
sleV2QoS4PolicerColorCBS
OBJECT-TYPE
Committed Burst Size. The value is in unit for square of 2 bits The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.9IntColorCBSread-onlycurrent
sleV2QoS4PolicerColorPIR
OBJECT-TYPE
Peak Information Rate. *) Used only when sleV2QoS4PolicerColorType is trTCM. The value is in unit for 64 kbps. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.10IntColorPIRread-onlycurrent
sleV2QoS4PolicerColorPBS
OBJECT-TYPE
Peak Burst Size. *) Used only when sleV2QoS4PolicerColorType is trTCM. The value is in unit for square of 2 bits. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.11IntColorPBSread-onlycurrent
sleV2QoS4PolicerColorEBS
OBJECT-TYPE
Excess Burst Size. *) Used only when sleV2QoS4PolicerColorType is srTCM. The value is in unit for square of 2 bits. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.12IntColorEBSread-onlycurrent
sleV2QoS4PolicerColorRedAction
OBJECT-TYPE
The action to be apply when incoming packet is colored in red. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.13IntColorActionread-onlycurrent
sleV2QoS4PolicerColorYellowAction
OBJECT-TYPE
The action to be apply when incoming packet is colored in yellow. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.14IntColorActionread-onlycurrent
sleV2QoS4PolicerColorGreenAction
OBJECT-TYPE
The action to be apply when incoming packet is colored in green. (not supported) The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.15IntColorActionread-onlycurrent
sleV2QoS4PolicerRemarkLayerMode
OBJECT-TYPE
The remark mode 0 : Layer3 1 : Layer2
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.16Bits {remarkByDSCP(0), remarkByQueueOrCoS(1)}read-onlycurrent
sleV2QoS4PolicerRemarkMode
OBJECT-TYPE
This value is available when sleV2QoS4PolicerRemarkLayerMode bit was checked(one or more) 0 : remark Queue 1 : remark External CoS
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.17Bits {remarkQueue(0), remarkExtCoS(1)}read-onlycurrent
sleV2QoS4PolicerCounterMode
OBJECT-TYPE
The counter mode The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.18IntCounterModeread-onlycurrent
sleV2QoS4PolicerAvrgCounterMode
OBJECT-TYPE
The average counter mode The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.19IntAvrgCounterModeread-onlycurrent
sleV2QoS4PolicerMinBandwidth
OBJECT-TYPE
The minium bandwidth
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.20Integer32read-onlycurrent
sleV2QoS4PolicerMaxBandwidth
OBJECT-TYPE
The maximum bandwidth
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.21Integer32read-onlycurrent
sleV2QoS4PolicerColorRedDscp
OBJECT-TYPE
The desc value to be apply when incoming packet is colored in red. Default : 30(0x1e)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.22IntDscpread-onlycurrent
sleV2QoS4PolicerColorYellowDscp
OBJECT-TYPE
The desc value to be apply when incoming packet is colored in yellow. Default : 28(0x1c)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.23IntDscpread-onlycurrent
sleV2QoS4PolicerColorGreenDscp
OBJECT-TYPE
The desc value to be apply when incoming packet is colored in green. Default : 30(0x1a)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.24IntDscpread-onlycurrent
sleV2QoS4PolicerColorRedCosType
OBJECT-TYPE
The CoS type colored in red.
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.25INTEGER {none(0), mark(1), overwrite(2)}read-onlycurrent
sleV2QoS4PolicerColorRedCos
OBJECT-TYPE
The CoS colored in red.
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.26IntCoSread-onlycurrent
sleV2QoS4PolicerColorYellowCosType
OBJECT-TYPE
The CoS type colored in yellow
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.27INTEGER {none(0), mark(1), overwrite(2)}read-onlycurrent
sleV2QoS4PolicerColorYellowCos
OBJECT-TYPE
The CoS colored in yellow.
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.28IntToSread-onlycurrent
sleV2QoS4PolicerColorGreenCosType
OBJECT-TYPE
The CoS type colored in yellow
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.29INTEGER {none(0), mark(1), overwrite(2)}read-onlycurrent
sleV2QoS4PolicerColorGreenCos
OBJECT-TYPE
The CoS colored in green.
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.30IntToSread-onlycurrent
sleV2QoS4PolicerControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.4.1.2
sleV2QoS4PolicerControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.102.10.2.4.1.2.1INTEGER {createPolicer(1), modifyPolicer(2), destroyPolicer(3)}read-writecurrent
sleV2QoS4PolicerControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.102.10.2.4.1.2.2SleControlStatusTyperead-onlycurrent
sleV2QoS4PolicerControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.4.1.2.3Gauge32read-writecurrent
sleV2QoS4PolicerControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.4.1.2.4TimeTicksread-onlycurrent
sleV2QoS4PolicerControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.102.10.2.4.1.2.5SleControlRequestResultTyperead-onlycurrent
sleV2QoS4PolicerControlIndex
OBJECT-TYPE
The index of policer
1.3.6.1.4.1.6296.102.10.2.4.1.2.6IntPolicerIndexread-writecurrent
sleV2QoS4PolicerControlName
OBJECT-TYPE
The name of policer
1.3.6.1.4.1.6296.102.10.2.4.1.2.7OctetNameread-writecurrent
sleV2QoS4PolicerControlMeterMode
OBJECT-TYPE
The meter mode. *) According to this value, rate-limit and color-marking exclusively activated. The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.8IntMeterModeread-writecurrent
sleV2QoS4PolicerControlRateLimit
OBJECT-TYPE
The packet rate limit The value of -1 unlimit(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.9Integer32read-writecurrent
sleV2QoS4PolicerControlColorType
OBJECT-TYPE
Color marking type Available Value : srTCM or trTCM srTCM = Single Rate Three Color Marking trTCM = Two Rate Three Color Marking The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.10IntColorTyperead-writecurrent
sleV2QoS4PolicerControlColorMode
OBJECT-TYPE
Color marking mode. *) Used only when sleColorMarkingMode is aware The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.11IntColorModeread-writecurrent
sleV2QoS4PolicerControlColorAwareMode
OBJECT-TYPE
Color marking aware mode The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.12IntColorAwareModeread-writecurrent
sleV2QoS4PolicerControlColorCIR
OBJECT-TYPE
Committed Information Rate. The value is in unit for 64 kbps. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.13IntColorCIRread-writecurrent
sleV2QoS4PolicerControlColorCBS
OBJECT-TYPE
Committed Burst Size. The value is in unit for square of 2 bits The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.14IntColorCBSread-writecurrent
sleV2QoS4PolicerControlColorPIR
OBJECT-TYPE
Peak Information Rate. *) Used only when sleV2QoS4PolicerColorMode is Aware. The value is in unit for 64 kbps. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.15IntColorPIRread-writecurrent
sleV2QoS4PolicerControlColorPBS
OBJECT-TYPE
Peak Burst Size. *) Used only when sleV2QoS4PolicerColorMode is Aware. The value is in unit for square of 2 bits. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.16IntColorPBSread-writecurrent
sleV2QoS4PolicerControlColorEBS
OBJECT-TYPE
Excess Burst Size. *) Used only when sleV2QoS4PolicerColorMode is Blind. The value is in unit for square of 2 bits. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.17IntColorEBSread-writecurrent
sleV2QoS4PolicerControlColorRedAction
OBJECT-TYPE
The action to be apply when incoming packet is colored in red. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.18IntColorActionread-writecurrent
sleV2QoS4PolicerControlColorYellowAction
OBJECT-TYPE
The action to be apply when incoming packet is colored in yellow. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.19IntColorActionread-writecurrent
sleV2QoS4PolicerControlColorGreenAction
OBJECT-TYPE
The action to be apply when incoming packet is colored in green. (not supported) The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.20IntColorActionread-writecurrent
sleV2QoS4PolicerControlRemarkLayerMode
OBJECT-TYPE
The remark mode 0 : Layer3 1 : Layer2
1.3.6.1.4.1.6296.102.10.2.4.1.2.21Bits {remarkByDSCP(0), remarkByQueueOrCoS(1)}read-writecurrent
sleV2QoS4PolicerControlRemarkMode
OBJECT-TYPE
This value is available when sleV2QoS4PolicerControlRemarkLayerMode bit was checked(one or more) 0 : remark to Queue 1 : remark to External CoS
1.3.6.1.4.1.6296.102.10.2.4.1.2.22Bits {remarkQueue(0), remarkExtCoS(1)}read-onlycurrent
sleV2QoS4PolicerControlCounterMode
OBJECT-TYPE
The counter mode The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.23IntCounterModeread-writecurrent
sleV2QoS4PolicerControlAvrgCounterMode
OBJECT-TYPE
The average counter mode The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.24IntAvrgCounterModeread-writecurrent
sleV2QoS4PolicerControlMinBandwidth
OBJECT-TYPE
The minimum bandwidth
1.3.6.1.4.1.6296.102.10.2.4.1.2.25Integer32read-writecurrent
sleV2QoS4PolicerControlMaxBandwidth
OBJECT-TYPE
The maximum bandwidth
1.3.6.1.4.1.6296.102.10.2.4.1.2.26Integer32read-writecurrent
sleV2QoS4PolicerControlColorRedDscp
OBJECT-TYPE
The dscp value to be apply when incoming packet is colored in red
1.3.6.1.4.1.6296.102.10.2.4.1.2.27IntDscpread-writecurrent
sleV2QoS4PolicerControlColorYellowDscp
OBJECT-TYPE
The dscp value to be apply when incoming packet is colored in yellow
1.3.6.1.4.1.6296.102.10.2.4.1.2.28IntDscpread-writecurrent
sleV2QoS4PolicerControlColorGreenDscp
OBJECT-TYPE
The dscp value to be apply when incoming packet is colored in green
1.3.6.1.4.1.6296.102.10.2.4.1.2.29IntDscpread-writecurrent
sleV2QoS4PolicerControlColorRedCosType
OBJECT-TYPE
The CoS type colored in red.
1.3.6.1.4.1.6296.102.10.2.4.1.2.30INTEGER {none(0), mark(1), overwrite(2)}read-writecurrent
sleV2QoS4PolicerControlColorRedCos
OBJECT-TYPE
The CoS colored in red.
1.3.6.1.4.1.6296.102.10.2.4.1.2.31IntCoSread-writecurrent
sleV2QoS4PolicerControlColorYellowCosType
OBJECT-TYPE
The CoS type colored in yellow
1.3.6.1.4.1.6296.102.10.2.4.1.2.32INTEGER {none(0), mark(1), overwrite(2)}read-writecurrent
sleV2QoS4PolicerControlColorYellowCos
OBJECT-TYPE
The CoS colored in yellow.
1.3.6.1.4.1.6296.102.10.2.4.1.2.33IntToSread-writecurrent
sleV2QoS4PolicerControlColorGreenCosType
OBJECT-TYPE
The CoS type colored in yellow
1.3.6.1.4.1.6296.102.10.2.4.1.2.34INTEGER {none(0), mark(1), overwrite(2)}read-writecurrent
sleV2QoS4PolicerControlColorGreenCos
OBJECT-TYPE
The CoS colored in green.
1.3.6.1.4.1.6296.102.10.2.4.1.2.35IntToSread-writecurrent
sleV2QoS4PolicerNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.4.1.3
sleV2QoS4PolicerMatchCounter
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.4.2
sleV2QoS4PolicerMatchCounterTable
OBJECT-TYPE
policer match counter table.
1.3.6.1.4.1.6296.102.10.2.4.2.1not-accessiblecurrent
sleV2QoS4PolicerMatchCounterEntry
OBJECT-TYPE
key: sleV2QoS4PolicerMatchCounterName
1.3.6.1.4.1.6296.102.10.2.4.2.1.1not-accessiblecurrent
sleV2QoS4PolicerMatchCounterName
OBJECT-TYPE
The rule-counter policer name
1.3.6.1.4.1.6296.102.10.2.4.2.1.1.1OCTET STRING (SIZE(1..63))read-onlycurrent
sleV2QoS4PolicerMatchCounterDesc
OBJECT-TYPE
The rule-counter policer description.
1.3.6.1.4.1.6296.102.10.2.4.2.1.1.2OCTET STRING (SIZE(1..63))read-onlycurrent
sleV2QoS4PolicerMatchCounterValue
OBJECT-TYPE
The counter-value of matched policer.
1.3.6.1.4.1.6296.102.10.2.4.2.1.1.3Counter64read-onlycurrent
sleV2QoS4Policy
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.5
sleV2QoS4PolicyInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.5.1
sleV2QoS4PolicyTable
OBJECT-TYPE
policy table.
1.3.6.1.4.1.6296.102.10.2.5.1.1not-accessiblecurrent
sleV2QoS4PolicyEntry
OBJECT-TYPE
key: sleV2QoS4PolicyIndex
1.3.6.1.4.1.6296.102.10.2.5.1.1.1not-accessiblecurrent
sleV2QoS4PolicyIndex
OBJECT-TYPE
The index of policy
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.1IntPolicyIndexread-onlycurrent
sleV2QoS4PolicyName
OBJECT-TYPE
The name of policy
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.2OctetNameread-onlycurrent
sleV2QoS4PolicyFlowCnt
OBJECT-TYPE
The counter of flow that was included to policy
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.3Integer32read-onlycurrent
sleV2QoS4PolicyClassCnt
OBJECT-TYPE
The counter of class that was included to policy
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.4Integer32read-onlycurrent
sleV2QoS4PolicyPolicerIndex
OBJECT-TYPE
The index of policer 0: no policer
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.5INTEGER (0 | 1..1024)read-onlycurrent
sleV2QoS4PolicyPriority
OBJECT-TYPE
The priority of the policy low : default value
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.6IntRulePriorityread-onlycurrent
sleV2QoS4PolicyIngressPorts
OBJECT-TYPE
The ingress port map
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.7OCTET STRINGread-onlycurrent
sleV2QoS4PolicyEgressPorts
OBJECT-TYPE
The egress port map
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.8OCTET STRINGread-onlycurrent
sleV2QoS4PolicyVlan
OBJECT-TYPE
The index of vlan The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.9IntVlanIDread-onlycurrent
sleV2QoS4PolicyMatchFlag
OBJECT-TYPE
The action to be apply for matched packets. bit 0: deny the matched packets bit 1: mirror the matched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow bit 7 : permit the matched packets bit 8 : set inner VLAN value bit 9 : set outer VLAN value
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.10Bits {deny(0), mirror(1), copyToCPU(2), sameAsTos(3), sameAsCos(4), cos(5), tos(6), permit(7)}read-writecurrent
sleV2QoS4PolicyMatchVlan
OBJECT-TYPE
The vlan id to be assigned for the matched packets The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.11IntVlanIDread-onlycurrent
sleV2QoS4PolicyMatchRedirectVlan
OBJECT-TYPE
If the value of sleV2QoS4PolicyMatchRedirectVlan is set the value of sleV2QoS4PolicyMatchRedirectPort must be set.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.12IntVlanIDread-onlycurrent
sleV2QoS4PolicyMatchRedirectPort
OBJECT-TYPE
If the value of sleV2QoS4PolicyMatchRedirectPort is set the value of sleV2QoS4PolicyMatchRedirectVlan must be set.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.13IntInterfaceIndexread-onlycurrent
sleV2QoS4PolicyMatchMarkMode
OBJECT-TYPE
The match mark mode The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.14IntMarkModeread-onlycurrent
sleV2QoS4PolicyMatchQueue
OBJECT-TYPE
The queue value to be apply for the matched packets The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.15IntQueueread-onlycurrent
sleV2QoS4PolicyMatchDp
OBJECT-TYPE
The drop precedence The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.16IntDPread-onlycurrent
sleV2QoS4PolicyMatchCoS
OBJECT-TYPE
The Class of Service The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.17IntCoSread-onlycurrent
sleV2QoS4PolicyMatchDscp
OBJECT-TYPE
The DSCP The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.18IntDscpread-onlycurrent
sleV2QoS4PolicyMatchIpPrecedence
OBJECT-TYPE
The IP precedence The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.19IntIpPrecedenceread-onlycurrent
sleV2QoS4PolicyMatchDstMacOrEgressPorts
OBJECT-TYPE
If the value is nothing, sleV2QoS4PolicyMatchDstMac and sleV2QoS4PolicyMatchEgressPorts value is not available If the value is dstMac, the value of sleV2QoS4PolicyMatchDstMac is available If the value is egressPorts, the value of sleV2QoS4PolicyMatchEgressPorts is avalible
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.20IntDstMacOrEgressPortsread-onlycurrent
sleV2QoS4PolicyMatchDstMac
OBJECT-TYPE
Destination MAC Address of the matched packets The value of 00:00:00:00:00:00 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.21MacAddressread-onlycurrent
sleV2QoS4PolicyMatchEgressPorts
OBJECT-TYPE
The egress port map of the matched packets
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.22OCTET STRINGread-onlycurrent
sleV2QoS4PolicyNomatchFlag
OBJECT-TYPE
The action to be apply for matched packets. bit 0: deny the nomatched packets bit 1: mirror the nomatched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.23Bits {deny(0), mirror(1), copyToCPU(2), sameAsTos(3), sameAsCos(4), cos(5), tos(6), permit(7)}read-onlycurrent
sleV2QoS4PolicyNomatchRedirectPort
OBJECT-TYPE
The port to redirect to a nomatched packet. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.24IntInterfaceIndexread-onlycurrent
sleV2QoS4PolicyNomatchCoS
OBJECT-TYPE
The Class of Service The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.25IntCoSread-onlycurrent
sleV2QoS4PolicyNomatchDscp
OBJECT-TYPE
The DSCP The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.26IntDscpread-onlycurrent
sleV2QoS4PolicyNomatchIpPrecedence
OBJECT-TYPE
The IP precedence The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.27IntIpPrecedenceread-writecurrent
sleV2QoS4PolicyCounterValue
OBJECT-TYPE
The value of the counter Packet count or bytes according to policer's counter mode. The value of 0 is no matched count.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.28Counter64read-onlycurrent
sleV2QoS4PolicyCounterGreenBytes
OBJECT-TYPE
The value of the octet counter for green-marked packets. Available only when sleV2QoS4PolicerMeterMode's value is color. The value of 0 is no matched count.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.29Counter64read-onlycurrent
sleV2QoS4PolicyCounterYellowBytes
OBJECT-TYPE
The value of the octet counter for yellow-marked packets. Available only when sleV2QoS4PolicerMeterMode's value is color. The value of 0 is no matched count.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.30Counter64read-onlycurrent
sleV2QoS4PolicyCounterRedBytes
OBJECT-TYPE
The value of the octet counter for red-marked packets. Available only when sleV2QoS4PolicerMeterMode's value is color. The value of 0 is no matched count.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.31Counter64read-onlycurrent
sleV2QoS4PolicyRedirBlackhole
OBJECT-TYPE
The packet discard
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.32IntEnableFlagread-onlycurrent
sleV2QoS4PolicyAvrg5SecCounterValue
OBJECT-TYPE
The value of the average counter of 5 second. The bytes according to policer's average counter mode. The value of 0 is no matched count.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.33Counter64read-onlycurrent
sleV2QoS4PolicyAvrg1minCounterValue
OBJECT-TYPE
The value of the average counter of 1 minute. The bytes according to policer's average counter mode. The value of 0 is no matched count.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.34Counter64read-onlycurrent
sleV2QoS4PolicyAvrg10minCounterValue
OBJECT-TYPE
The value of the average counter of 10 minute. The bytes according to policer's average counter mode. The value of 0 is no matched count.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.35Counter64read-onlycurrent
sleV2QoS4PolicyIngressTunnelIfIndex
OBJECT-TYPE
Ingress tunnel interface index.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.36Integer32 (10000..11023)read-onlycurrent
sleV2QoS4PolicyEgressTunnelIfIndex
OBJECT-TYPE
Egress tunnel interface index.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.37Integer32 (10000..11023)read-onlycurrent
sleV2QoS4PolicyCounterElapsedTimeAfterClear
OBJECT-TYPE
The elapsed time after clearing counter.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.38TimeTicksread-onlycurrent
sleV2QoS4PolicyMatchPbrNextHop
OBJECT-TYPE
The PBR(Policy-Based_routing) nexthop address.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.39IpAddressread-onlycurrent
sleV2QoS4PolicyStage
OBJECT-TYPE
The rule-policy-stage.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.40INTEGER {ingress(1), prio(2), egress(3), external(4)}read-onlycurrent
sleV2QoS4PolicyIngressPortsFlag
OBJECT-TYPE
The interface-binding ingress-port flag of policy.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.41INTEGER {none(0), any(1), cpu(2)}read-onlycurrent
sleV2QoS4PolicyEgressPortsFlag
OBJECT-TYPE
The interface-binding egress-port flag of policy.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.42INTEGER {none(0), any(1), cpu(2)}read-onlycurrent
sleV2QoS4PolicyInnerVlanAction
OBJECT-TYPE
The InnerVlan Action Mode The Value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.43INTEGER {nothing(-1), add(1), replace(2), del(3)}read-onlycurrent
sleV2QoS4PolicyOuterVlanAction
OBJECT-TYPE
The OuterVlan Action Mode The Value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.44INTEGER {nothing(-1), add(1), replace(2)}read-onlycurrent
sleV2QoS4PolicyInnerVlan
OBJECT-TYPE
The inner vlan id to be assigned for the matched packets The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.45INTEGER (-1 | 1..4094)read-onlycurrent
sleV2QoS4PolicyOuterVlan
OBJECT-TYPE
The outer vlan id to be assigned for the matched packets The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.46INTEGER (-1 | 1..4094)read-onlycurrent
sleV2QoS4PolicyMatchPbrNextHopSecondary
OBJECT-TYPE
The PBR(Policy-Based_routing) nexthop secondary address.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.47IpAddressread-onlycurrent
sleV2QoS4PolicyMatchPbrNextHopVerifyReach
OBJECT-TYPE
The PBR(Policy-Based_routing) Verify-Reachability.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.48INTEGER {false(0), true(1)}read-onlycurrent
sleV2QoS4PolicyMatchFlowAlias
OBJECT-TYPE
The action match flowAlias
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.49OCTET STRINGread-onlycurrent
sleV2QoS4PolicyMatchInnerVlanCosReplace
OBJECT-TYPE
The inner vlan COS replace (-1: delete)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.50Integer32 (-1 | 0..7)read-onlycurrent
sleV2QoS4PolicyMatchInnerVlanCfiReplace
OBJECT-TYPE
The inner vlan CFI replace (-1: delete)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.51Integer32 (-1 | 0..1)read-onlycurrent
sleV2QoS4PolicyMatchOuterVlanCosReplace
OBJECT-TYPE
The outer vlan COS replace (-1: delete)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.52Integer32 (-1 | 0..7)read-onlycurrent
sleV2QoS4PolicyMatchOuterVlanCfiReplace
OBJECT-TYPE
The outer vlan CFI replace (-1: delete)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.53Integer32 (-1 | 0..1)read-onlycurrent
sleV2QoS4PolicyControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.5.1.2
sleV2QoS4PolicyControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.102.10.2.5.1.2.1INTEGER {createPolicy(1), setPolicyInfo(2), setMatchAction(3), setNomatchAction(4), destroyPolicy(5), clearCounter(6), createEmptyPolicy(7), setPolicyIngressTunnel(8), unsetPolicyIngressTunnel(9), setPolicyEgressTunnel(10), unsetPolicyEgressTunnel(11), setMatchActionFlowAlias(12), setMatchInnerVlanCosReplace(13), setMatchInnerVlanCfiReplace(14), setMatchOuterVlanCosReplace(15), setMatchOuterVlanCfiReplace(16)}read-writecurrent
sleV2QoS4PolicyControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.102.10.2.5.1.2.2SleControlStatusTyperead-onlycurrent
sleV2QoS4PolicyControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.5.1.2.3Gauge32read-writecurrent
sleV2QoS4PolicyControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.5.1.2.4TimeTicksread-onlycurrent
sleV2QoS4PolicyControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.102.10.2.5.1.2.5SleControlRequestResultTyperead-onlycurrent
sleV2QoS4PolicyControlIndex
OBJECT-TYPE
The index of policy
1.3.6.1.4.1.6296.102.10.2.5.1.2.6IntPolicyIndexread-writecurrent
sleV2QoS4PolicyControlName
OBJECT-TYPE
The name of policy
1.3.6.1.4.1.6296.102.10.2.5.1.2.7OctetNameread-writecurrent
sleV2QoS4PolicyControlPolicerIndex
OBJECT-TYPE
The index of policer 0: no policer
1.3.6.1.4.1.6296.102.10.2.5.1.2.8INTEGER (0 | 1..1024)read-writecurrent
sleV2QoS4PolicyControlPriority
OBJECT-TYPE
The priority of the policy low : default
1.3.6.1.4.1.6296.102.10.2.5.1.2.9IntRulePriorityread-writecurrent
sleV2QoS4PolicyControlIngressPorts
OBJECT-TYPE
The ingress port map
1.3.6.1.4.1.6296.102.10.2.5.1.2.10OCTET STRINGread-writecurrent
sleV2QoS4PolicyControlEgressPorts
OBJECT-TYPE
The egress port map
1.3.6.1.4.1.6296.102.10.2.5.1.2.11OCTET STRINGread-writecurrent
sleV2QoS4PolicyControlVlan
OBJECT-TYPE
The index of vlan The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.12IntVlanIDread-writecurrent
sleV2QoS4PolicyControlMatchFlag
OBJECT-TYPE
The action to be apply for matched packets. bit 0: deny the matched packets bit 1: mirror the matched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow bit 7 : permit the matched packets bit 8 : set inner VLAN value bit 9 : set outer VLAN value
1.3.6.1.4.1.6296.102.10.2.5.1.2.13Bits {deny(0), mirror(1), copyToCPU(2), sameAsTos(3), sameAsCos(4), cos(5), tos(6), permit(7)}read-writecurrent
sleV2QoS4PolicyControlMatchVlan
OBJECT-TYPE
The vlan id to be assigned for the matched packets The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.14IntVlanIDread-writecurrent
sleV2QoS4PolicyControlMatchRedirectVlan
OBJECT-TYPE
The valn id to redirect to a matched packet If the value of sleV2QoS4PolicyMatchRedirectVlan is set the value of sleV2QoS4PolicyMatchRedirectPort must be set. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.15IntVlanIDread-writecurrent
sleV2QoS4PolicyControlMatchRedirectPort
OBJECT-TYPE
The port to redirect to a matched packet. If the value of sleV2QoS4PolicyMatchRedirectPort is set the value of sleV2QoS4PolicyMatchRedirectVlan must be set. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.16IntInterfaceIndexread-writecurrent
sleV2QoS4PolicyControlMatchMarkMode
OBJECT-TYPE
The match mark mode The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.17IntMarkModeread-writecurrent
sleV2QoS4PolicyControlMatchQueue
OBJECT-TYPE
The queue value to be apply for the matched packets The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.18IntQueueread-writecurrent
sleV2QoS4PolicyControlMatchDp
OBJECT-TYPE
The drop precedence The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.19IntDPread-writecurrent
sleV2QoS4PolicyControlMatchCoS
OBJECT-TYPE
The Class of Service The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.20Integer32read-writecurrent
sleV2QoS4PolicyControlMatchDscp
OBJECT-TYPE
The DSCP The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.21IntDscpread-writecurrent
sleV2QoS4PolicyControlMatchIpPrecedence
OBJECT-TYPE
The IP precedence The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.22IntIpPrecedenceread-writecurrent
sleV2QoS4PolicyControlMatchDstMacOrEgressPorts
OBJECT-TYPE
If the value is nothing, sleV2QoS4PolicyControlMatchDstMac and sleV2QoS4PolicyControlMatchEgressPorts value is not available If the value is dstMac, the value of sleV2QoS4PolicyControlMatchDstMac is available If the value is egressPorts, the value of sleV2QoS4PolicyControlMatchEgressPorts is avalible
1.3.6.1.4.1.6296.102.10.2.5.1.2.23IntDstMacOrEgressPortsread-writecurrent
sleV2QoS4PolicyControlMatchDstMac
OBJECT-TYPE
Destination MAC Address of the matched packets The value of 00:00:00:00:00:00 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.24MacAddressread-writecurrent
sleV2QoS4PolicyControlMatchEgressPorts
OBJECT-TYPE
The egress port map of the matched packets
1.3.6.1.4.1.6296.102.10.2.5.1.2.25OCTET STRINGread-writecurrent
sleV2QoS4PolicyControlNomatchFlag
OBJECT-TYPE
The action to be apply for matched packets. bit 0: deny the nomatched packets bit 1: mirror the nomatched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow
1.3.6.1.4.1.6296.102.10.2.5.1.2.26Bits {deny(0), mirror(1), copyToCPU(2), sameAsTos(3), sameAsCos(4), cos(5), tos(6), permit(7)}read-writecurrent
sleV2QoS4PolicyControlNomatchRedirectPort
OBJECT-TYPE
The port to redirect to a nomatched packet. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.27IntInterfaceIndexread-writecurrent
sleV2QoS4PolicyControlNomatchCoS
OBJECT-TYPE
The Class of Service The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.28IntCoSread-writecurrent
sleV2QoS4PolicyControlNomatchDscp
OBJECT-TYPE
The DSCP The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.29IntDscpread-writecurrent
sleV2QoS4PolicyControlNomatchIpPrecedence
OBJECT-TYPE
The IP precedence The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.30IntIpPrecedenceread-writecurrent
sleV2QoS4PolicyControlMatchRedirBlackhole
OBJECT-TYPE
The packet discard
1.3.6.1.4.1.6296.102.10.2.5.1.2.31IntEnableFlagread-writecurrent
sleV2QoS4PolicyControlIngressTunnelIfIndex
OBJECT-TYPE
Ingress tunnel interface index.
1.3.6.1.4.1.6296.102.10.2.5.1.2.32Integer32 (10000..11023)read-writecurrent
sleV2Qo4SPolicyControlEgressTunnelIfIndex
OBJECT-TYPE
Egress tunnel interface index.
1.3.6.1.4.1.6296.102.10.2.5.1.2.33Integer32 (10000..11023)read-writecurrent
sleV2QoS4PolicyControlMatchPbrNextHop
OBJECT-TYPE
The PBR(Policy-Based_routing) nexthop address.
1.3.6.1.4.1.6296.102.10.2.5.1.2.34IpAddressread-writecurrent
sleV2QoS4PolicyControlStage
OBJECT-TYPE
The rule-policy-stage.
1.3.6.1.4.1.6296.102.10.2.5.1.2.35INTEGER {ingress(1), prio(2), egress(3), external(4)}read-writecurrent
sleV2QoS4PolicyControlIngressPortsFlag
OBJECT-TYPE
The interface-binding ingress-port flag of policy.
1.3.6.1.4.1.6296.102.10.2.5.1.2.36INTEGER {none(0), any(1), cpu(2)}read-writecurrent
sleV2QoS4PolicyControlEgressPortsFlag
OBJECT-TYPE
The interface-binding egress-port flag of policy.
1.3.6.1.4.1.6296.102.10.2.5.1.2.37INTEGER {none(0), any(1), cpu(2)}read-writecurrent
sleV2QoS4PolicyControlInnerVlanAction
OBJECT-TYPE
The InnerVlan Action Mode The Value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.38INTEGER {nothing(-1), add(1), replace(2), del(3)}read-writecurrent
sleV2QoS4PolicyControlOuterVlanAction
OBJECT-TYPE
The OuterVlan Action Mode The Value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.39INTEGER {nothing(-1), add(1), replace(2)}read-writecurrent
sleV2QoS4PolicyControlInnerVlan
OBJECT-TYPE
The inner vlan id to be assigned for the matched packets The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.40INTEGER (-1 | 1..4094)read-writecurrent
sleV2QoS4PolicyControlOuterVlan
OBJECT-TYPE
The outer vlan id to be assigned for the matched packets The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.41INTEGER (-1 | 1..4094)read-writecurrent
sleV2QoS4PolicyControlMatchPbrNextHopSecondary
OBJECT-TYPE
The PBR(Policy-Based_routing) nexthop secondary address.
1.3.6.1.4.1.6296.102.10.2.5.1.2.42IpAddressread-writecurrent
sleV2QoS4PolicyControlMatchPbrNextHopVerifyReach
OBJECT-TYPE
The PBR(Policy-Based_routing) Verify-Reachability.
1.3.6.1.4.1.6296.102.10.2.5.1.2.43INTEGER {false(0), true(1)}read-writecurrent
sleV2QoS4PolicyControlMatchFlowAlias
OBJECT-TYPE
The action match flowAlias
1.3.6.1.4.1.6296.102.10.2.5.1.2.44OCTET STRINGread-onlycurrent
sleV2QoS4PolicyControlMatchInnerVlanCosReplace
OBJECT-TYPE
The inner vlan COS replace (-1: delete)
1.3.6.1.4.1.6296.102.10.2.5.1.2.45Integer32 (-1 | 0..7)read-writecurrent
sleV2QoS4PolicyControlMatchInnerVlanCfiReplace
OBJECT-TYPE
The inner vlan CFI replace (-1: delete)
1.3.6.1.4.1.6296.102.10.2.5.1.2.46Integer32 (-1 | 0..1)read-writecurrent
sleV2QoS4PolicyControlMatchOuterVlanCosReplace
OBJECT-TYPE
The outer vlan COS replace (-1: delete)
1.3.6.1.4.1.6296.102.10.2.5.1.2.47Integer32 (-1 | 0..7)read-writecurrent
sleV2QoS4PolicyControlMatchOuterVlanCfiReplace
OBJECT-TYPE
The outer vlan CFI replace (-1: delete)
1.3.6.1.4.1.6296.102.10.2.5.1.2.48Integer32 (-1 | 0..1)read-writecurrent
sleV2QoSPolicyNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.5.1.3
sleV2QoS4PolicyFlowClass
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.5.2
sleV2QoS4PolicyFlowClassTable
OBJECT-TYPE
flow class table.
1.3.6.1.4.1.6296.102.10.2.5.2.1not-accessiblecurrent
sleV2QoS4PolicyFlowClassEntry
OBJECT-TYPE
key: sleV2QoS4PolicyIndex, sleV2QoS4PolicyFlowClassIndex
1.3.6.1.4.1.6296.102.10.2.5.2.1.1not-accessiblecurrent
sleV2QoS4PolicyFlowClassIndex
OBJECT-TYPE
The index of flow or class in policy
1.3.6.1.4.1.6296.102.10.2.5.2.1.1.1IntFlowIndexread-onlycurrent
sleV2QoS4PolicyFlowClassType
OBJECT-TYPE
The flag about flow or class
1.3.6.1.4.1.6296.102.10.2.5.2.1.1.2IntFlowOrClassread-onlycurrent
sleV2QoS4PolicyFlowClassID
OBJECT-TYPE
The identifier of class or flow
1.3.6.1.4.1.6296.102.10.2.5.2.1.1.3IntFlowIndexread-onlycurrent
sleV2QoS4PolicyFlowClassName
OBJECT-TYPE
The name of class or flow
1.3.6.1.4.1.6296.102.10.2.5.2.1.1.4OctetNameread-onlycurrent
sleV2QoS4PolicyFlowClassControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.5.2.2
sleV2QoS4PolicyFlowClassControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.102.10.2.5.2.2.1INTEGER {addFlowClass(1), deleteFlowClass(2), deleteAllFlow(3), deleteAllClass(4), deleteAllFlowClass(5)}read-writecurrent
sleV2QoS4PolicyFlowClassControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.102.10.2.5.2.2.2SleControlStatusTyperead-writecurrent
sleV2QoS4PolicyFlowClassControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.5.2.2.3Gauge32read-writecurrent
sleV2QoS4PolicyFlowClassControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.5.2.2.4TimeTicksread-writecurrent
sleV2QoS4PolicyFlowClassControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.102.10.2.5.2.2.5SleControlRequestResultTyperead-writecurrent
sleV2QoS4PolicyFlowClassControlPolicyIndex
OBJECT-TYPE
The index of Policy
1.3.6.1.4.1.6296.102.10.2.5.2.2.6IntPolicyIndexread-writecurrent
sleV2QoS4PolicyFlowClassControlIndex
OBJECT-TYPE
The index of flow or class in this policy
1.3.6.1.4.1.6296.102.10.2.5.2.2.7IntFlowIndexread-writecurrent
sleV2QoS4PolicyFlowClassControlType
OBJECT-TYPE
The type of flow or class
1.3.6.1.4.1.6296.102.10.2.5.2.2.8IntFlowOrClassread-writecurrent
sleV2QoS4PolicyFlowClassControlFlowID
OBJECT-TYPE
The index of flow Available according to sleV2QoS4PolicyFlowClassControlType.
1.3.6.1.4.1.6296.102.10.2.5.2.2.9IntFlowIndexread-writecurrent
sleV2QoS4PolicyFlowClassControlClassID
OBJECT-TYPE
The index of class Available according to sleV2QoS4PolicyFlowClassControlType.
1.3.6.1.4.1.6296.102.10.2.5.2.2.10IntClassIndexread-writecurrent
sleV2QoS4PolicyFlowClassNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.5.2.3
sleV2QoS4PolicyIF
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.5.3
sleV2QoS4PolicyIFTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.5.3.1not-accessiblecurrent
sleV2QoS4PolicyIFEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.5.3.1.1not-accessiblecurrent
sleV2QoS4PolicyIFDirection
OBJECT-TYPE
Packet input/output direction
1.3.6.1.4.1.6296.102.10.2.5.3.1.1.1INTEGER {input(1), output(2)}read-onlycurrent
sleV2QoS4PolicyIFControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.5.3.2
sleV2QoS4PolicyIFControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.102.10.2.5.3.2.1INTEGER {setServicePolicy(1), clearServicePolicy(2)}read-writecurrent
sleV2QoS4PolicyIFControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.102.10.2.5.3.2.2SleControlStatusTyperead-onlycurrent
sleV2QoS4PolicyIFControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.5.3.2.3Gauge32read-writecurrent
sleV2QoS4PolicyIFControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.5.3.2.4TimeTicksread-onlycurrent
sleV2QoS4PolicyIFControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.102.10.2.5.3.2.5SleControlRequestResultTyperead-onlycurrent
sleV2QoS4PolicyIFControlIfindex
OBJECT-TYPE
The interface index.
1.3.6.1.4.1.6296.102.10.2.5.3.2.6Integer32read-writecurrent
sleV2QoS4PolicyIFControlPolicyIndex
OBJECT-TYPE
The Policy index.
1.3.6.1.4.1.6296.102.10.2.5.3.2.7IntPolicerIndexread-writecurrent
sleV2QoS4PolicyIFControlDirection
OBJECT-TYPE
Packet input/output direction
1.3.6.1.4.1.6296.102.10.2.5.3.2.8INTEGER {input(1), output(2)}read-writecurrent
sleV2QoS4PolicyIFNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.5.3.3
sleV2QoS4Remark
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.6
sleV2QoS4RemarkBase
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.6.1
sleV2QoS4RemarkInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.6.1.1
sleV2QoS4RemarkLayer2Mode
OBJECT-TYPE
The layer2 remark mode 1 : remark based on queue (default) 2 : remark based on 802.1p priority
1.3.6.1.4.1.6296.102.10.2.6.1.1.1IntL2BaseRemarkModeread-onlycurrent
sleV2QoS4RemarkMode
OBJECT-TYPE
The remark mode 0 : enable 801.1p-remark for IP packets 1 : enable 801.1p-remark for Non-IP packets
1.3.6.1.4.1.6296.102.10.2.6.1.1.2Bits {remarkPriorityIP(0), remarkByQueueOrCoS(1)}read-onlycurrent
sleV2QoS4RemarkControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.6.1.2
sleV2QoS4RemarkControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.102.10.2.6.1.2.1INTEGER {setRemarkMode(1)}read-writecurrent
sleV2QoS4RemarkControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.102.10.2.6.1.2.2SleControlStatusTyperead-writecurrent
sleV2QoS4RemarkControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.6.1.2.3Gauge32read-writecurrent
sleV2QoS4RemarkControlTimStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.6.1.2.4TimeTicksread-writecurrent
sleV2QoS4RemarkControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.102.10.2.6.1.2.5SleControlRequestResultTyperead-writecurrent
sleV2QoS4RemarkControlLayer2Mode
OBJECT-TYPE
The layer2 remark mode -1: default (remarkByQueue) 1 : remark by queue 2 : remark by priority
1.3.6.1.4.1.6296.102.10.2.6.1.2.6IntL2BaseRemarkModeread-writecurrent
sleV2QoS4RemarkControlMode
OBJECT-TYPE
The remark mode 0 : enable 801.1p-remark for IP packets 1 : enable 801.1p-remark for Non-IP packets
1.3.6.1.4.1.6296.102.10.2.6.1.2.7Bits {remarkByDSCP(0), remarkByQueueOrCoS(1)}read-writecurrent
sleV2QoS4RemarkNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.6.1.3
sleV2QoS4RemarkL3
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.6.2
sleV2QoS4RemarkL3Table
OBJECT-TYPE
remark L3 table.
1.3.6.1.4.1.6296.102.10.2.6.2.1not-accessiblecurrent
sleV2QoS4RemarkL3Entry
OBJECT-TYPE
key: sleV2QoS4RemarkL3ColorIndex, sleV2QoS4RemarkL3DSCPIndex
1.3.6.1.4.1.6296.102.10.2.6.2.1.1not-accessiblecurrent
sleV2QoS4RemarkL3ColorIndex
OBJECT-TYPE
The index of color
1.3.6.1.4.1.6296.102.10.2.6.2.1.1.1IntColorIndexread-onlycurrent
sleV2QoS4RemarkL3DSCPIndex
OBJECT-TYPE
The index of DSCP The index value of 1~ 64 mean 0 ~ 63 of the DSCP
1.3.6.1.4.1.6296.102.10.2.6.2.1.1.2IntDSCPIndexread-onlycurrent
sleV2QoS4RemarkL3Queue
OBJECT-TYPE
This is remarking to queue by Color and DSCP 0 : default
1.3.6.1.4.1.6296.102.10.2.6.2.1.1.3IntQueueread-onlycurrent
sleV2QoS4RemarkL3Dp
OBJECT-TYPE
This is remarking to drop precednece by Color and DSCP 0 : default
1.3.6.1.4.1.6296.102.10.2.6.2.1.1.4IntDPread-onlycurrent
sleV2QoS4RemarkL3CoS
OBJECT-TYPE
This is remarking to CoS by Color and DSCP 0 : default
1.3.6.1.4.1.6296.102.10.2.6.2.1.1.5IntCoSread-onlycurrent
sleV2QoS4RemarkL3Dscp
OBJECT-TYPE
This is remarking to DSCP by Color and DSCP 0 : default
1.3.6.1.4.1.6296.102.10.2.6.2.1.1.6IntDscpread-onlycurrent
sleV2QoS4RemarkL3Control
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.6.2.2
sleV2QoS4RemarkL3ControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.102.10.2.6.2.2.1INTEGER {setL3Remark(1)}read-writecurrent
sleV2QoS4RemarkL3ControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.102.10.2.6.2.2.2SleControlStatusTyperead-writecurrent
sleV2QoS4RemarkL3ControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.6.2.2.3Gauge32read-writecurrent
sleV2QoS4RemarkL3ControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.6.2.2.4TimeTicksread-writecurrent
sleV2QoS4RemarkL3ControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.102.10.2.6.2.2.5SleControlRequestResultTyperead-writecurrent
sleV2QoS4RemarkL3ControlColorIndex
OBJECT-TYPE
The index of color marking
1.3.6.1.4.1.6296.102.10.2.6.2.2.6IntColorIndexread-writecurrent
sleV2QoS4RemarkL3ControlDSCPIndex
OBJECT-TYPE
The index of DSCP The index value of 1~ 64 mean 0 ~ 63 of the DSCP
1.3.6.1.4.1.6296.102.10.2.6.2.2.7IntDSCPIndexread-writecurrent
sleV2QoS4RemarkL3ControlQueue
OBJECT-TYPE
This is remarking to queue by Color and DSCP The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.6.2.2.8IntQueueread-writecurrent
sleV2QoS4RemarkL3ControlDp
OBJECT-TYPE
This is remarking to drop precednece by Color and DSCP The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.6.2.2.9IntDPread-writecurrent
sleV2QoS4RemarkL3ControlCoS
OBJECT-TYPE
This is remarking to CoS by Color and DSCP The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.6.2.2.10IntCoSread-writecurrent
sleV2QoS4RemarkL3ControlDscp
OBJECT-TYPE
This is remarking to DSCP by Color and DSCP The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.6.2.2.11IntDscpread-writecurrent
sleV2QoS4RemarkL3Notification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.6.2.3
sleV2QoS4RemarkL2
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.6.3
sleV2QoS4RemarkL2Table
OBJECT-TYPE
remark L2 table.
1.3.6.1.4.1.6296.102.10.2.6.3.1not-accessiblecurrent
sleV2QoS4RemarkL2Entry
OBJECT-TYPE
key: sleV2QoS4RemarkL2ColorIndex, sleV2QoS4RemarkL2QueueCoSIndex
1.3.6.1.4.1.6296.102.10.2.6.3.1.1not-accessiblecurrent
sleV2QoS4RemarkL2ColorIndex
OBJECT-TYPE
The index of color marking
1.3.6.1.4.1.6296.102.10.2.6.3.1.1.1IntColorIndexread-onlycurrent
sleV2QoS4RemarkL2QueueCoSIndex
OBJECT-TYPE
The index of queue or CoS The index value of 1~ 8 mean 0 ~ 7 of the queue and CoS Refer to sleV2QoS4RemarkLayer2Mode
1.3.6.1.4.1.6296.102.10.2.6.3.1.1.2IntQueueCoSIndexread-onlycurrent
sleV2QoS4RemarkL2Queue
OBJECT-TYPE
This is remarking to queue by Color and L2(queue or CoS) 0 : default
1.3.6.1.4.1.6296.102.10.2.6.3.1.1.3IntQueueread-onlycurrent
sleV2QoS4RemarkL2Dp
OBJECT-TYPE
This is remarking to drop precednece by L2(queue or CoS) 0 : default
1.3.6.1.4.1.6296.102.10.2.6.3.1.1.4IntDPread-onlycurrent
sleV2QoS4RemarkL2CoS
OBJECT-TYPE
This is remarking to CoS by Color and L2(queue or CoS) 0 : default
1.3.6.1.4.1.6296.102.10.2.6.3.1.1.5IntCoSread-onlycurrent
sleV2QoS4RemarkL2Dscp
OBJECT-TYPE
This is remarking to DSCP by Color and L2(queue or CoS) 0 : default
1.3.6.1.4.1.6296.102.10.2.6.3.1.1.6IntDscpread-onlycurrent
sleV2QoS4RemarkL2Control
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.6.3.2
sleV2QoS4RemarkL2ControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.102.10.2.6.3.2.1INTEGER {setL2Remark(1)}read-writecurrent
sleV2QoS4RemarkL2ControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.102.10.2.6.3.2.2SleControlStatusTyperead-writecurrent
sleV2QoS4RemarkL2ControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.6.3.2.3Gauge32read-writecurrent
sleV2QoS4RemarkL2ControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.6.3.2.4TimeTicksread-writecurrent
sleV2QoS4RemarkL2ControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.102.10.2.6.3.2.5SleControlRequestResultTyperead-writecurrent
sleV2QoS4RemarkL2ControlColorIndex
OBJECT-TYPE
The index of color marking
1.3.6.1.4.1.6296.102.10.2.6.3.2.6IntColorIndexread-writecurrent
sleV2QoS4RemarkL2ControlQueueCoSIndex
OBJECT-TYPE
The index of queue or CoS The index value of 1~ 8 mean 0 ~ 7 of the queue and CoS Refer to sleV2QoS4RemarkLayer2Mod
1.3.6.1.4.1.6296.102.10.2.6.3.2.7IntQueueCoSIndexread-writecurrent
sleV2QoS4RemarkL2ControlQueue
OBJECT-TYPE
This is remarking to queue by Color and L2(queue or CoS) The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.6.3.2.8IntQueueread-writecurrent
sleV2QoS4RemarkL2ControlDp
OBJECT-TYPE
This is remarking to drop precednece by L2(queue or CoS) The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.6.3.2.9IntDPread-writecurrent
sleV2QoS4RemarkL2ControlCoS
OBJECT-TYPE
This is remarking to CoS by Color and L2(queue or CoS) The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.6.3.2.10IntCoSread-writecurrent
sleV2QoS4RemarkL2ControlDscp
OBJECT-TYPE
This is remarking to DSCP by Color and L2(queue or CoS) The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.6.3.2.11IntDscpread-writecurrent
sleV2QoS4RemarkL2Notification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.6.3.3
sleV2QoS4RED
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.7
sleV2QoS4REDProfile
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.7.1
sleV2QoS4REDProfileTable
OBJECT-TYPE
redundancy profile table.
1.3.6.1.4.1.6296.102.10.2.7.1.1not-accessiblecurrent
sleV2QoS4REDProfileEntry
OBJECT-TYPE
key: sleV2QoS4REDProfileId, sleV2QoS4REDProfileQueueId
1.3.6.1.4.1.6296.102.10.2.7.1.1.1not-accessiblecurrent
sleV2QoS4REDProfileId
OBJECT-TYPE
The index of RED profile. Marvell : (1..4), BCM : number of ports.
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.1INTEGER (1..255)read-onlycurrent
sleV2QoS4REDProfileQueueId
OBJECT-TYPE
The index of queue.
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.2INTEGER (1..8)read-onlycurrent
sleV2QoS4REDProfileDp0MinThres
OBJECT-TYPE
DP0 min threshold. In case RED, used as RED min threshold. Marvell : (1..65535), BCM : (0..127)
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.3INTEGER (-1 | 0..65535)read-onlycurrent
sleV2QoS4REDProfileDp0MaxThres
OBJECT-TYPE
DP0 max threshold. Used only in case WRED. Marvell : (1..65535), BCM : not supported.
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.4INTEGER (-1 | 0..65535)read-onlycurrent
sleV2QoS4REDProfileDp0Prob
OBJECT-TYPE
DP0 drop probability. In case RED, used as RED prob
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.5INTEGER (-1 | 1..15)read-onlycurrent
sleV2QoS4REDProfileDp1MinThres
OBJECT-TYPE
DP1 min threshold. Used only in case WRED Marvell : (1..65535), BCM : not supported.
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.6INTEGER (-1 | 0..65535)read-onlycurrent
sleV2QoS4REDProfileDp1MaxThres
OBJECT-TYPE
DP1 max threshold. Used only in case WRED Marvell : (1..65535), BCM : not supported.
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.7INTEGER (-1 | 0..65535)read-onlycurrent
sleV2QoS4REDProfileDp1Prob
OBJECT-TYPE
DP1 drop probability.
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.8INTEGER (-1 | 1..15)read-onlycurrent
sleV2QoS4REDProfileDp2MinThres
OBJECT-TYPE
DP2 min threshold. Used only in case WRED Marvell : (1..65535), BCM : not supported.
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.9INTEGER (-1 | 0..65535)read-onlycurrent
sleV2QoS4REDProfileDp2MaxThres
OBJECT-TYPE
DP2 max threshold. Used only in case WRED Marvell : (1..65535), BCM : not supported.
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.10INTEGER (-1 | 0..65535)read-onlycurrent
sleV2QoS4REDProfileDp2Prob
OBJECT-TYPE
DP2 drop probability.
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.11INTEGER (-1 | 1..15)read-onlycurrent
sleV2QoS4REDProfileWeight
OBJECT-TYPE
Drop weight, Used only in case WRED. BCM : not supported.
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.12INTEGER (-1 | 1..15)read-onlycurrent
sleV2QoS4REDProfileControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.7.1.2
sleV2QoS4REDProfileControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.102.10.2.7.1.2.1INTEGER {setREDProfile(1), clearREDProfile(2)}read-writecurrent
sleV2QoS4REDProfileControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.102.10.2.7.1.2.2SleControlStatusTyperead-onlycurrent
sleV2QoS4REDProfileControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.7.1.2.3Gauge32read-writecurrent
sleV2QoS4REDProfileControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.7.1.2.4TimeTicksread-onlycurrent
sleV2QoS4REDProfileControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.102.10.2.7.1.2.5SleControlRequestResultTyperead-onlycurrent
sleV2QoS4REDProfileControlId
OBJECT-TYPE
The index of RED profile. Marvell (1..4), BCM : number of ports
1.3.6.1.4.1.6296.102.10.2.7.1.2.6INTEGER (1..255)read-writecurrent
sleV2QoS4REDProfileControlQueueId
OBJECT-TYPE
The index of queues
1.3.6.1.4.1.6296.102.10.2.7.1.2.7INTEGER (1..8)read-writecurrent
sleV2QoS4REDProfileControlDp0MinThres
OBJECT-TYPE
DP0 min threshold. In case RED, used as RED min threshold. Marvell (1..65535), BCM (0..127)
1.3.6.1.4.1.6296.102.10.2.7.1.2.8INTEGER (-1 | 0..65535)read-writecurrent
sleV2QoS4REDProfileControlDp0MaxThres
OBJECT-TYPE
DP0 max threshold. Used only in case WRED. Marvell (1..65535), BCM: not supported
1.3.6.1.4.1.6296.102.10.2.7.1.2.9INTEGER (-1 | 0..65535)read-writecurrent
sleV2QoS4REDProfileControlDp0Prob
OBJECT-TYPE
DP0 Drop Probability In case RED, used as RED prob.
1.3.6.1.4.1.6296.102.10.2.7.1.2.10INTEGER (-1 | 1..15)read-writecurrent
sleV2QoS4REDProfileControlDp1MinThres
OBJECT-TYPE
DP1 min threshold. Used only in case WRED. Marvell (1..65535), BCM: not supported
1.3.6.1.4.1.6296.102.10.2.7.1.2.11INTEGER (-1 | 0..65535)read-writecurrent
sleV2QoS4REDProfileControlDp1MaxThres
OBJECT-TYPE
DP1 max threshold. Used only in case WRED Marvell (1..65535), BCM: not supported
1.3.6.1.4.1.6296.102.10.2.7.1.2.12INTEGER (-1 | 0..65535)read-writecurrent
sleV2QoS4REDProfileControlDp1Prob
OBJECT-TYPE
DP1 Drop Probability. Used only in case WRED. BCM: not supported
1.3.6.1.4.1.6296.102.10.2.7.1.2.13INTEGER (-1 | 1..15)read-writecurrent
sleV2QoS4REDProfileControlDp2MinThres
OBJECT-TYPE
DP2 min threshold. Used only in case WRED Marvell (1..65535), BCM: not supported
1.3.6.1.4.1.6296.102.10.2.7.1.2.14INTEGER (-1 | 0..65535)read-writecurrent
sleV2QoS4REDProfileControlDp2MaxThres
OBJECT-TYPE
DP2 max threshold. Marvell (1..65535), BCM: not supported
1.3.6.1.4.1.6296.102.10.2.7.1.2.15INTEGER (-1 | 0..65535)read-writecurrent
sleV2QoS4REDProfileControlDp2Prob
OBJECT-TYPE
DP2 Drop Probability. Used only in case WRED. BCM: not supported
1.3.6.1.4.1.6296.102.10.2.7.1.2.16INTEGER (-1 | 1..15)read-writecurrent
sleV2QoS4REDProfileControlWeight
OBJECT-TYPE
Drop weight. Used only in case WRED. BCM: not supported
1.3.6.1.4.1.6296.102.10.2.7.1.2.17INTEGER (-1 | 1..15)read-writecurrent
sleV2QoS4REDProfileNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.7.1.3
sleV2QoS4PortREDInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.7.2
sleV2QoS4PortREDInfoTable
OBJECT-TYPE
port redundancy info table.
1.3.6.1.4.1.6296.102.10.2.7.2.1not-accessiblecurrent
sleV2QoS4PortREDInfoEntry
OBJECT-TYPE
key: sleV2QoS4PortREDInfoInterfaceIndex
1.3.6.1.4.1.6296.102.10.2.7.2.1.1not-accessiblecurrent
sleV2QoS4PortREDInfoInterfaceIndex
OBJECT-TYPE
Inrterface Index
1.3.6.1.4.1.6296.102.10.2.7.2.1.1.1InterfaceIndexread-onlycurrent
sleV2QoS4PortREDInfoEnable
OBJECT-TYPE
RED/WRED enable flag BCM: only available RED, Marvell: only available WRED
1.3.6.1.4.1.6296.102.10.2.7.2.1.1.2INTEGER {disable(0), red(1), wred(2)}read-onlycurrent
sleV2QoS4PortREDInfoProfileId
OBJECT-TYPE
RED profile index. In case sleV2QoS4PortREDInfoEnable == disable, invalid Marvell : (1..4), BCM : number of ports In case BCM, this value is equal to port index. (read-only)
1.3.6.1.4.1.6296.102.10.2.7.2.1.1.3INTEGER (-1 | 1..255)read-onlycurrent
sleV2QoS4PortREDInfoControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.7.2.2
sleV2QoS4PortREDInfoControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.102.10.2.7.2.2.1INTEGER {setPortREDInfo(1)}read-writecurrent
sleV2QoS4PortREDInfoControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.102.10.2.7.2.2.2SleControlStatusTyperead-onlycurrent
sleV2QoS4PortREDInfoControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.7.2.2.3Gauge32read-writecurrent
sleV2QoS4PortREDInfoControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.7.2.2.4TimeTicksread-onlycurrent
sleV2QoS4PortREDInfoControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.102.10.2.7.2.2.5SleControlRequestResultTyperead-onlycurrent
sleV2QoS4PortREDInfoControlInterfaceIndex
OBJECT-TYPE
Inrterface Index
1.3.6.1.4.1.6296.102.10.2.7.2.2.6InterfaceIndexread-writecurrent
sleV2QoS4PortREDInfoControlEnable
OBJECT-TYPE
RED/WRED enable flag
1.3.6.1.4.1.6296.102.10.2.7.2.2.7INTEGER {disable(0), red(1), wred(2)}read-writecurrent
sleV2QoS4PortREDInfoControlProfileId
OBJECT-TYPE
RED profile index. This value is valid only when sleV2QoS4PortREDInfoEnable is equal to RED or WRED only, valid. Marvell : (1..4), BCM : number of ports In case BCM, this value is equal to port index. (read-only)
1.3.6.1.4.1.6296.102.10.2.7.2.2.8INTEGER (-1 | 1..255)read-writecurrent
sleV2QoS4PortREDInfoNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.7.2.3
sleV2QoS4Queue
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.8
sleV2QoS4QueueInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.8.1
sleV2QoS4QueueInfoTable
OBJECT-TYPE
queue info table.
1.3.6.1.4.1.6296.102.10.2.8.1.1not-accessiblecurrent
sleV2QoS4QueueInfoEntry
OBJECT-TYPE
key: sleV2QoS4QueueInfoInterfaceIndex, sleV2QoS4QueueInfoId
1.3.6.1.4.1.6296.102.10.2.8.1.1.1not-accessiblecurrent
sleV2QoS4QueueInfoInterfaceIndex
OBJECT-TYPE
Inrterface Index
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.1InterfaceIndexread-onlycurrent
sleV2QoS4QueueInfoId
OBJECT-TYPE
The index of queue
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.2INTEGER (1..8)read-onlycurrent
sleV2QoS4QueueInfoScheduleMode
OBJECT-TYPE
Schedule mode of queue.
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.3INTEGER {sp(1), rr(2), wrr(3), wfq(4), drr(5), bd(6)}read-onlycurrent
sleV2QoS4QueueInfoDWRRGroup
OBJECT-TYPE
Queue dwrr group
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.4INTEGER {undefined(0), group0(1), group1(2)}read-onlycurrent
sleV2QoS4QueueInfoMinBandwidth
OBJECT-TYPE
Min bandwidth of queue
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.5Integer32read-onlycurrent
sleV2QoS4QueueInfoMaxBandwidth
OBJECT-TYPE
Max bandwidth of queue
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.6Integer32read-onlycurrent
sleV2QoS4QueueInfoWeight
OBJECT-TYPE
Weight of queue BCM (1..15), Marvell (6..255)
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.7INTEGER (-1 | 1..255)read-onlycurrent
sleV2QoS4QueueMappedCoS
OBJECT-TYPE
Mapped cos
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.8INTEGER (0..7)read-onlycurrent
sleV2QoS4QueueInfoBufferEgressMinLimitUnicast
OBJECT-TYPE
Buffer Egress Min Limit for unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.9Integer32read-onlycurrent
sleV2QoS4QueueInfoBufferEgressMaxLimitPolicyUnicast
OBJECT-TYPE
Policy to Buffer Egress Max Limit for unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.10INTEGER {static(1), dynamic(2)}read-onlycurrent
sleV2QoS4QueueInfoBufferEgressMaxLimitUnicast
OBJECT-TYPE
Buffer Egress Max Limit for unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.11Integer32read-onlycurrent
sleV2QoS4QueueInfoBufferEgressMinLimitNonUnicast
OBJECT-TYPE
Buffer Egress Min Limit for non-unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.12Integer32read-onlycurrent
sleV2QoS4QueueInfoBufferEgressMaxLimitPolicyNonUnicast
OBJECT-TYPE
Policy to Buffer Egress Max Limit for non-unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.13INTEGER {static(1), dynamic(2)}read-onlycurrent
sleV2QoS4QueueInfoBufferEgressMaxLimitNonUnicast
OBJECT-TYPE
Buffer Egress Max Limit for non-unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.14Integer32read-onlycurrent
sleV2QoS4QueueInfoControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.8.1.2
sleV2QoS4QueueInfoControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.102.10.2.8.1.2.1INTEGER {setQueueInfo(1), setScheduleMode(2), setMaxBandwidth(3), setMinBandwidth(4), setWeight(5), setBufferEgressMinLimitUnicast(6), clearBufferEgressMinLimitUnicast(7), setBufferEgressMaxLimitUnicast(8), clearBufferEgressMaxLimitUnicast(9), setBufferEgressMinLimitNonUnicast(10), clearBufferEgressMinLimitNonUnicast(11), setBufferEgressMaxLimitNonUnicast(12), clearBufferEgressMaxLimitNonUnicast(13)}read-writecurrent
sleV2QoS4QueueInfoControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.102.10.2.8.1.2.2SleControlStatusTyperead-onlycurrent
sleV2QoS4QueueInfoControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.8.1.2.3Gauge32read-writecurrent
sleV2QoS4QueueInfoControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.8.1.2.4TimeTicksread-onlycurrent
sleV2QoS4QueueInfoControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.102.10.2.8.1.2.5SleControlRequestResultTyperead-onlycurrent
sleV2QoS4QueueInfoControlInterfaceIndex
OBJECT-TYPE
Inrterface Index
1.3.6.1.4.1.6296.102.10.2.8.1.2.6InterfaceIndexread-writecurrent
sleV2QoS4QueueInfoControlId
OBJECT-TYPE
The index of queue
1.3.6.1.4.1.6296.102.10.2.8.1.2.7INTEGER (1..8)read-writecurrent
sleV2QoS4QueueInfoControlScheduleMode
OBJECT-TYPE
Schedule mode of queue. ( V5524 : sp, wrr, wfq, V5212G : sp, wrr, V5424G : sp, wrr, drr V6424 : sp, dwrr )
1.3.6.1.4.1.6296.102.10.2.8.1.2.8INTEGER {sp(1), rr(2), wrr(3), wfq(4), drr(5), bd(6)}read-writecurrent
sleV2QoS4QueueInfoControlDWRRGroup
OBJECT-TYPE
Queue dwrr group ( V6424 )
1.3.6.1.4.1.6296.102.10.2.8.1.2.9INTEGER {undefined(0), group0(1), group1(2)}read-writecurrent
sleV2QoS4QueueInfoControlMinBandwidth
OBJECT-TYPE
Min bandwidth of queue. ( V5524 : wfq, V5424G : drr, V6424 : dwrr )
1.3.6.1.4.1.6296.102.10.2.8.1.2.10Integer32read-writecurrent
sleV2QoS4QueueInfoControlMaxBandwidth
OBJECT-TYPE
Max bandwidth of queue
1.3.6.1.4.1.6296.102.10.2.8.1.2.11Integer32read-writecurrent
sleV2QoS4QueueInfoControlWeight
OBJECT-TYPE
Weight of queue BCM (1..15), Marvell (6..255) ( V5524, V5212G, V5424G : wrr, V6424 : dwrr )
1.3.6.1.4.1.6296.102.10.2.8.1.2.12INTEGER (1..255)read-writecurrent
sleV2QoS4QueueInfoControlMappedCoS
OBJECT-TYPE
Mapped cos
1.3.6.1.4.1.6296.102.10.2.8.1.2.13INTEGER (0..7)read-writecurrent
sleV2QoS4QueueInfoControlBufferEgressMinLimitUnicast
OBJECT-TYPE
Buffer Egress Min Limit for unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.2.14Integer32read-writecurrent
sleV2QoS4QueueInfoControlBufferEgressMaxLimitPolicyUnicast
OBJECT-TYPE
Policy to Buffer Egress Max Limit for unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.2.15INTEGER {static(1), dynamic(2)}read-writecurrent
sleV2QoS4QueueInfoControlBufferEgressMaxLimitUnicast
OBJECT-TYPE
Buffer Egress Max Limit for unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.2.16Integer32read-writecurrent
sleV2QoS4QueueInfoControlBufferEgressMinLimitNonUnicast
OBJECT-TYPE
Buffer Egress Min Limit for non-unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.2.17Integer32read-writecurrent
sleV2QoS4QueueInfoControlBufferEgressMaxLimitPolicyNonUnicast
OBJECT-TYPE
Policy to Buffer Egress Max Limit for non-unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.2.18INTEGER {static(1), dynamic(2)}read-writecurrent
sleV2QoS4QueueInfoControlBufferEgressMaxLimitNonUnicast
OBJECT-TYPE
Buffer Egress Max Limit for non-unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.2.19Integer32read-writecurrent
sleV2QoS4QueueInfoNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.8.1.3
sleV2QoS4DscpMap
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.9
sleV2QoS4DscpMapIngress
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.9.1
sleV2QoS4DscpMapIngressTable
OBJECT-TYPE
DSCP map ingress table.
1.3.6.1.4.1.6296.102.10.2.9.1.1not-accessiblecurrent
sleV2QoS4DscpMapIngressEntry
OBJECT-TYPE
key: sleV2QoS4DscpMapIngressDscpIndex
1.3.6.1.4.1.6296.102.10.2.9.1.1.1not-accessiblecurrent
sleV2QoS4DscpMapIngressDscpIndex
OBJECT-TYPE
Ingress DSCP mapping index. The index value of 1~ 64 mean 0 ~ 63 of the DSCP.
1.3.6.1.4.1.6296.102.10.2.9.1.1.1.1INTEGER (1..64)read-onlycurrent
sleV2QoS4DscpMapIngressDscp
OBJECT-TYPE
DSCP value.
1.3.6.1.4.1.6296.102.10.2.9.1.1.1.2OCTET STRING (SIZE(0..63))read-onlycurrent
sleV2QoS4DscpMapIngressCos
OBJECT-TYPE
The Class of Service.
1.3.6.1.4.1.6296.102.10.2.9.1.1.1.3INTEGER (0..7)read-onlycurrent
sleV2QoS4DscpMapIngressColor
OBJECT-TYPE
Specify color by Internal DP.
1.3.6.1.4.1.6296.102.10.2.9.1.1.1.4INTEGER {green(1), yellow(2), red(3)}read-onlycurrent
sleV2QoS4DscpMapIngressControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.9.1.2
sleV2QoS4DscpMapIngressControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.102.10.2.9.1.2.1INTEGER {setDscpMapIngress(1)}read-writecurrent
sleV2QoS4DscpMapIngressControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.102.10.2.9.1.2.2SleControlStatusTyperead-onlycurrent
sleV2QoS4DscpMapIngressControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.9.1.2.3Gauge32read-writecurrent
sleV2QoS4DscpMapIngressControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.9.1.2.4TimeTicksread-onlycurrent
sleV2QoS4DscpMapIngressControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.102.10.2.9.1.2.5SleControlRequestResultTyperead-onlycurrent
sleV2QoS4DscpMapIngressControlDscpIndex
OBJECT-TYPE
Ingress DSCP mapping index. The index value of 1~ 64 mean 0 ~ 63 of the DSCP.
1.3.6.1.4.1.6296.102.10.2.9.1.2.6INTEGER (1..64)read-writecurrent
sleV2QoS4DscpMapIngressControlDscp
OBJECT-TYPE
DSCP value.
1.3.6.1.4.1.6296.102.10.2.9.1.2.7INTEGER (0..63)read-writecurrent
sleV2QoS4DscpMapIngressControlCos
OBJECT-TYPE
The Class of Service.
1.3.6.1.4.1.6296.102.10.2.9.1.2.8INTEGER (0..7)read-writecurrent
sleV2QoS4DscpMapIngressControlColor
OBJECT-TYPE
Specify color by Internal DP.
1.3.6.1.4.1.6296.102.10.2.9.1.2.9INTEGER {green(1), yellow(2), red(3)}read-writecurrent
sleV2QoS4DscpMapIngressNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.9.1.3
sleV2QoS4DscpMapTunnel
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.9.2
sleV2QoS4DscpMapTunnelTable
OBJECT-TYPE
DSCP map tunnel table.
1.3.6.1.4.1.6296.102.10.2.9.2.1not-accessiblecurrent
sleV2QoS4DscpMapTunnelEntry
OBJECT-TYPE
key: sleV2QoS4DscpMapTunnelPriority, sleV2QoS4DscpMapTunnelColor
1.3.6.1.4.1.6296.102.10.2.9.2.1.1not-accessiblecurrent
sleV2QoS4DscpMapTunnelPriority
OBJECT-TYPE
Internal packet priority. The index value of 1 ~ 8 mean 0 ~ 7 of the priority.
1.3.6.1.4.1.6296.102.10.2.9.2.1.1.1INTEGER (1..8)read-onlycurrent
sleV2QoS4DscpMapTunnelColor
OBJECT-TYPE
Specify color by Internal DP.
1.3.6.1.4.1.6296.102.10.2.9.2.1.1.2INTEGER {green(1), yellow(2), red(3)}read-onlycurrent
sleV2QoS4DscpMapTunnelDscp
OBJECT-TYPE
DSCP value.
1.3.6.1.4.1.6296.102.10.2.9.2.1.1.3INTEGER (0..63)read-onlycurrent
sleV2QoS4DscpMapTunnelControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.9.2.2
sleV2QoS4DscpMapTunnelControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.102.10.2.9.2.2.1INTEGER {setDscpMapTunnel(1)}read-writecurrent
sleV2QoS4DscpMapTunnelControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.102.10.2.9.2.2.2SleControlStatusTyperead-onlycurrent
sleV2QoS4DscpMapTunnelControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.9.2.2.3Gauge32read-writecurrent
sleV2QoS4DscpMapTunnelControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.9.2.2.4TimeTicksread-onlycurrent
sleV2QoS4DscpMapTunnelControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.102.10.2.9.2.2.5SleControlRequestResultTyperead-onlycurrent
sleV2QoS4DscpMapTunnelControlPriority
OBJECT-TYPE
Internal packet priority. The index value of 1 ~ 8 mean 0 ~ 7 of the priority.
1.3.6.1.4.1.6296.102.10.2.9.2.2.6INTEGER (1..8)read-writecurrent
sleV2QoS4DscpMapTunnelControlColor
OBJECT-TYPE
Specify color by Internal DP.
1.3.6.1.4.1.6296.102.10.2.9.2.2.7INTEGER {green(1), yellow(2), red(3)}read-writecurrent
sleV2QoS4DscpMapTunnelControlDscp
OBJECT-TYPE
DSCP value.
1.3.6.1.4.1.6296.102.10.2.9.2.2.8INTEGER (0..63)read-writecurrent
sleV2QoS4DscpMapTunnelNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.2.9.2.3
sleV2QoS6
OBJECT-IDENTITY
1.3.6.1.4.1.6296.102.10.3

Notifications

NameOIDStatus
sleV2QoS4BaseFlowModeChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.1.3.1current
sleFlowCreated
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.2.1.3.1current
sleFlowChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.2.1.3.2current
sleFlowDestroyed
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.2.1.3.3current
sleFlowAllDestroyed
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.2.1.3.4current
sleFlowInPktTagChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.2.1.3.5current
sleFlowOutPktTagChanged
NOTIFICATION-TYPE
setOutPktTag
1.3.6.1.4.1.6296.102.10.2.2.1.3.6current
sleFlowAliasChanged
NOTIFICATION-TYPE
setFlowAlias
1.3.6.1.4.1.6296.102.10.2.2.1.3.7current
sleFlowExCreated
NOTIFICATION-TYPE
createFlowEx
1.3.6.1.4.1.6296.102.10.2.2.1.3.8current
sleFlowExChanged
NOTIFICATION-TYPE
setFlowEx
1.3.6.1.4.1.6296.102.10.2.2.1.3.9current
sleClassCreated
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.3.1.3.1current
sleClassDestroyed
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.3.1.3.2current
sleClassAllDestroyed
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.3.1.3.3current
sleClassFlowAdded
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.3.2.3.1current
sleClassFlowDeleted
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.3.2.3.2current
sleClassFlowAllDeleted
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.3.2.3.3current
slePolicerCreated
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.4.1.3.1current
slePolicerChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.4.1.3.2current
slePolicerDestroyed
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.4.1.3.3current
slePolicyCreated
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.5.1.3.1current
slePolicyInfoChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.5.1.3.2current
slePolicyMatchActionChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.5.1.3.3current
slePolicyNomatchActionChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.5.1.3.4current
slePolicyDestroyed
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.5.1.3.5current
slePolicyCounterCleared
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.5.1.3.6current
slePolicyEmptyCreated
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.5.1.3.7current
slePolicyIngressTunnelSet
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.5.1.3.8current
slePolicyIngressTunnelUnset
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.5.1.3.9current
slePolicyEgressTunnelSet
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.5.1.3.10current
slePolicyEgressTunnelUnset
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.5.1.3.11current
slePolicyActionMatchFlowAliasChanged
NOTIFICATION-TYPE
setMatchActionFlowAlias
1.3.6.1.4.1.6296.102.10.2.5.1.3.12current
slePolicyMatchInnerVlanCosReplaceChanged
NOTIFICATION-TYPE
setMatchInnerVlanCosReplace
1.3.6.1.4.1.6296.102.10.2.5.1.3.13current
slePolicyMatchInnerVlanCfiReplaceChanged
NOTIFICATION-TYPE
setMatchInnerVlanCfiReplace
1.3.6.1.4.1.6296.102.10.2.5.1.3.14current
slePolicyMatchOuterVlanCosReplaceChanged
NOTIFICATION-TYPE
setMatchOuterVlanCosReplace
1.3.6.1.4.1.6296.102.10.2.5.1.3.15current
slePolicyMatchOuterVlanCfiReplaceChanged
NOTIFICATION-TYPE
setMatchOuterVlanCfiReplace
1.3.6.1.4.1.6296.102.10.2.5.1.3.16current
slePolicyFlowAdded
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.5.2.3.1current
slePolicyFlowDeleted
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.5.2.3.2current
slePolicyAllFlowDeleted
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.5.2.3.3current
slePolicyAllClassDeleted
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.5.2.3.4current
slePolicyAllFlowClassDeleted
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.5.2.3.5current
sleV2QosPolicyIFServicePolicyChanged
NOTIFICATION-TYPE
setServicePolicy
1.3.6.1.4.1.6296.102.10.2.5.3.3.1current
sleV2QosPolicyIFServicePolicyCleared
NOTIFICATION-TYPE
setServicePolicy
1.3.6.1.4.1.6296.102.10.2.5.3.3.2current
sleRemarkChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.6.1.3.1current
sleRemarkL3Changed
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.6.2.3.1current
sleRemarkL2Changed
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.6.3.3.1current
sleV2QS4REDProfileChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.7.1.3.1current
sleV2QS4REDProfileCleared
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.7.1.3.2current
sleV2QoS4PortREDInfoChanged
NOTIFICATION-TYPE
setPortREDInfo
1.3.6.1.4.1.6296.102.10.2.7.2.3.1current
sleV2QoS4QueueInfoChanged
NOTIFICATION-TYPE
setQueueInfo
1.3.6.1.4.1.6296.102.10.2.8.1.3.1current
sleV2QoS4QueueInfoScheduleModeChanged
NOTIFICATION-TYPE
setScheduleMode
1.3.6.1.4.1.6296.102.10.2.8.1.3.2current
sleV2QoS4QueueInfoMaxBandwidthChanged
NOTIFICATION-TYPE
setMaxBandwidth
1.3.6.1.4.1.6296.102.10.2.8.1.3.3current
sleV2QoS4QueueInfoMinBandwidthChanged
NOTIFICATION-TYPE
setMinBandwidth
1.3.6.1.4.1.6296.102.10.2.8.1.3.4current
sleV2QoS4QueueInfoWeightChanged
NOTIFICATION-TYPE
setWeight
1.3.6.1.4.1.6296.102.10.2.8.1.3.5current
sleV2QoS4QueueInfoBufferEgressMinLimitUnicastChanged
NOTIFICATION-TYPE
setBufferEgressMinLimitUnicast
1.3.6.1.4.1.6296.102.10.2.8.1.3.6current
sleV2QoS4QueueInfoBufferEgressMinLimitUnicastCleared
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.8.1.3.7current
sleV2QoS4QueueInfoBufferEgressMaxLimitUnicastChanged
NOTIFICATION-TYPE
setBufferEgressMaxLimitUnicast
1.3.6.1.4.1.6296.102.10.2.8.1.3.8current
sleV2QoS4QueueInfoBufferEgressMaxLimitUnicastCleared
NOTIFICATION-TYPE
clearBufferEgressMaxLimitUnicast
1.3.6.1.4.1.6296.102.10.2.8.1.3.9current
sleV2QoS4QueueInfoBufferEgressMinLimitNonUnicastChanged
NOTIFICATION-TYPE
setBufferEgressMinLimitNonUnicast
1.3.6.1.4.1.6296.102.10.2.8.1.3.10current
sleV2QoS4QueueInfoBufferEgressMinLimitNonUnicastCleared
NOTIFICATION-TYPE
clearBufferEgressMinLimitNonUnicast
1.3.6.1.4.1.6296.102.10.2.8.1.3.11current
sleV2QoS4QueueInfoBufferEgressMaxLimitNonUnicastChanged
NOTIFICATION-TYPE
setBufferEgressMaxLimitNonUnicast
1.3.6.1.4.1.6296.102.10.2.8.1.3.12current
sleV2QoS4QueueInfoBufferEgressMaxLimitNonUnicastCleared
NOTIFICATION-TYPE
clearBufferEgressMaxLimitNonUnicast
1.3.6.1.4.1.6296.102.10.2.8.1.3.13current
sleV2QoS4DscpMapIngressChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.9.1.3.1current
sleV2QoS4DscpMapTunnelChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.102.10.2.9.2.3.1current

Conformance

NameOIDStatus
sleV2QoSGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.6296.102.10.4current
sleV2QoSNotificationGroup
NOTIFICATION-GROUP
Description.
1.3.6.1.4.1.6296.102.10.5current