MIBs Depot

SLE-VOIP-MIB

Registered at
1.3.6.1.4.1.6296.101.25
Last updated
2011-12-14 18:14
Organization
Organization.
Namespace
dasan
Source file
SLE-VOIP-MIB
Digest
sha256:634c2a9fce6f9f3bffe680132876540ffc1756c64646c6089e95f6bf80101365

Description

This MIB contains all needed informations about rmon and all supported sle rmon features.

Contact

Contact-info.

Imports

FromSymbols
DASAN-SMIsleMgmt
SLE-TC-MIBSleControlRequestResultType, SleControlStatusType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIGauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DASAN-SMI
SLE-TC-MIB
SLE-VOIP-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
EnableDisableState
type
OwnerString
type

Objects

NameOIDSyntaxAccessStatus
sleVoipBase
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.1
sleVoipBaseInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.1.1
sleVoipInterface
OBJECT-TYPE
Display host interface name.
1.3.6.1.4.1.6296.101.25.1.1.1OCTET STRINGread-onlycurrent
sleVoipProtocol
OBJECT-TYPE
Display protocol (none|sip|mgcp) is set.
1.3.6.1.4.1.6296.101.25.1.1.2INTEGER {none(0), sip(1), mgcp(3)}read-onlycurrent
sleVoipRtcp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.1.1.3INTEGER {voipRtcpDisable(0), voipRtcpEnable(1)}read-onlycurrent
sleVoipFaxmode
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.1.1.4INTEGER {voipFaxmodeT30(0), voipFaxmodeT38(1)}read-onlycurrent
sleVoipBaseControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.1.2
sleVoipBaseControlRequest
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.1.2.1INTEGER {setVoipInterface(1), setVoipProtocol(2), voipRestartStackOnly(3), voipRestartAll(4), setVoipRtcp(5), setVoipFaxmode(6)}read-writecurrent
sleVoipBaseControlStatus
OBJECT-TYPE
The status of a user command.
1.3.6.1.4.1.6296.101.25.1.2.2SleControlStatusTyperead-onlycurrent
sleVoipBaseControlTimer
OBJECT-TYPE
The maximum wait time for the manager for a long running user command.
1.3.6.1.4.1.6296.101.25.1.2.3Gauge32read-writecurrent
sleVoipBaseControlTimeStamp
OBJECT-TYPE
The time stamp of the last command (end of command).
1.3.6.1.4.1.6296.101.25.1.2.4TimeTicksread-onlycurrent
sleVoipBaseControlReqResult
OBJECT-TYPE
Description
1.3.6.1.4.1.6296.101.25.1.2.5SleControlRequestResultTyperead-onlycurrent
sleVoipBaseControlInterface
OBJECT-TYPE
Host interface name. Explain each group,up to 32 characters string include Null character.
1.3.6.1.4.1.6296.101.25.1.2.6OCTET STRINGread-writecurrent
sleVoipBaseControlProtocol
OBJECT-TYPE
Protocol(none|sip|mgcp).(Optional) to explain each group,up to 32 characters string include Null character.
1.3.6.1.4.1.6296.101.25.1.2.7INTEGER {none(0), sip(1), mgcp(3)}read-writecurrent
sleVoipBaseControlRtcp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.1.2.8INTEGER {voipRtcpDisable(0), voipRtcpEnable(1)}read-writecurrent
sleVoipBaseControlFaxmode
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.1.2.9INTEGER {voipFaxmodeT30(0), voipFaxmodeT38(1)}read-writecurrent
sleVoipBaseNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.1.3
sleVoipVoice
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.2
sleVoipVoiceTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.2.1not-accessiblecurrent
sleVoipVoiceEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.2.1.1not-accessiblecurrent
sleVoipVoiceIndex
OBJECT-TYPE
DESCRIPTION: The index of the voice. <1-8>
1.3.6.1.4.1.6296.101.25.2.1.1.1Integer32 (1..8)read-onlycurrent
sleVoipVoiceEncoding
OBJECT-TYPE
Line coding (0:a-law,1:mu-law).
1.3.6.1.4.1.6296.101.25.2.1.1.2INTEGER {a(0), m(1)}read-onlycurrent
sleVoipVoiceUserEncoding
OBJECT-TYPE
a-law telephony companding algorithm,mu-law telephony companding algorithm.
1.3.6.1.4.1.6296.101.25.2.1.1.3INTEGER {a(0), m(1)}read-onlycurrent
sleVoipVoiceComfortNoise
OBJECT-TYPE
Comfort Noise (0: on;1: off)
1.3.6.1.4.1.6296.101.25.2.1.1.4INTEGER {on(0), off(1)}read-onlycurrent
sleVoipVoiceEchoCancel
OBJECT-TYPE
Echo cancellation,(on|off).
1.3.6.1.4.1.6296.101.25.2.1.1.5INTEGER {off(0), on(1)}read-onlycurrent
sleVoipVoicePacketLoss
OBJECT-TYPE
Packet Loss Concealment,(on|off). Index: Channel Index,Range is from 0 to 7. Packetloss: Packet Loss Concealment, (1:on,0:off).
1.3.6.1.4.1.6296.101.25.2.1.1.6INTEGER {off(0), on(1)}read-onlycurrent
sleVoipVoiceVad
OBJECT-TYPE
Voice Activity Detection (on(0)|off(1)).
1.3.6.1.4.1.6296.101.25.2.1.1.7INTEGER {off(0), on(1)}read-onlycurrent
sleVoipVoiceDSCP
OBJECT-TYPE
DSCP number, Range is from 0 to 63.
1.3.6.1.4.1.6296.101.25.2.1.1.8Unsigned32 (0..63)read-onlycurrent
sleVoipVoiceJitter
OBJECT-TYPE
Jitter Buffer parameter (0-500ms).Default value is 500ms.
1.3.6.1.4.1.6296.101.25.2.1.1.9Unsigned32 (0..500)read-onlycurrent
sleVoipVoiceControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.2.2
sleVoipVoiceControlRequest
OBJECT-TYPE
The request of a user command.
1.3.6.1.4.1.6296.101.25.2.2.1INTEGER {enableVoiceVoip(1), disableVoiceVoip(2)}read-writecurrent
sleVoipVoiceControlStatus
OBJECT-TYPE
The status of user command.
1.3.6.1.4.1.6296.101.25.2.2.2SleControlStatusTyperead-onlycurrent
sleVoipVoiceControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command. Apply your setting.
1.3.6.1.4.1.6296.101.25.2.2.3Gauge32read-writecurrent
sleVoipVoiceControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command).
1.3.6.1.4.1.6296.101.25.2.2.4TimeTicksread-onlycurrent
sleVoipVoiceControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.101.25.2.2.5SleControlRequestResultTyperead-onlycurrent
sleVoipVoiceControlIndex
OBJECT-TYPE
The index of the voice. <1-8>
1.3.6.1.4.1.6296.101.25.2.2.6Integer32 (1..8)read-writecurrent
sleVoipVoiceControlEncoding
OBJECT-TYPE
Line coding (0:a-law,1:mu-law).(Optional) to explain each group,up to 32 characters string include Null character.
1.3.6.1.4.1.6296.101.25.2.2.7INTEGER {alaw(0), mulaw(1)}read-writecurrent
sleVoipVoiceControlUserEncoding
OBJECT-TYPE
Description. (Optional) to explain each group,up to 32 characters string include NULL character. a-law telephony companding algorithm,mu-law telephony companding algorithm.
1.3.6.1.4.1.6296.101.25.2.2.8INTEGER {alaw(0), mulaw(1)}read-writecurrent
sleVoipVoiceControlComfortNoise
OBJECT-TYPE
(Optional) to explain each group,up to 32 characters string include NULL character.( on:turn on this function, off:turn off this function)
1.3.6.1.4.1.6296.101.25.2.2.9INTEGER {on(0), off(1)}read-writecurrent
sleVoipVoiceControlEchoCancel
OBJECT-TYPE
(Optional) to explain each group,up to 32 characters string include NULL character. Echo cancellation,(on|off).
1.3.6.1.4.1.6296.101.25.2.2.10INTEGER {off(0), on(1)}read-writecurrent
sleVoipVoiceControlPacketLoss
OBJECT-TYPE
Description. (Optional) to explain each group,up to 32 characters string include NULL character. Packet Loss Concealment,(on|off). Index: Channel Index,Range is from 0 to 7. Packetloss: Packet Loss Concealment, (1:on,0:off).
1.3.6.1.4.1.6296.101.25.2.2.11INTEGER {off(0), on(1)}read-writecurrent
sleVoipVoiceControlVad
OBJECT-TYPE
Description. (Optional) to explain each group,up to 32 characters string include NULL character. Voice Activity Detection (on(1)|off(0)).
1.3.6.1.4.1.6296.101.25.2.2.12INTEGER {off(0), on(1)}read-writecurrent
sleVoipVoiceControlDSCP
OBJECT-TYPE
Description. DSCP number, Range is from 0 to 63.
1.3.6.1.4.1.6296.101.25.2.2.13Unsigned32 (0..63)read-writecurrent
sleVoipVoiceControlJitter
OBJECT-TYPE
Description. (Optional) to explain each group,up to 32 characters string include NULL character. Jitter Buffer parameter (0-500ms).Default value is 500ms.
1.3.6.1.4.1.6296.101.25.2.2.14Unsigned32 (0..500)read-writecurrent
sleVoiceNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.2.3
sleVoipSipUser
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.3
sleVoipSipUserTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.3.1not-accessiblecurrent
sleVoipSipUserEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.3.1.1not-accessiblecurrent
sleVoipSipUserIndex
OBJECT-TYPE
The index of Sip user.(1..8)
1.3.6.1.4.1.6296.101.25.3.1.1.1Unsigned32 (1..8)read-onlycurrent
sleVoipSipUserAgent
OBJECT-TYPE
Display the reference to sip which agent.Range is from 1 to 8.
1.3.6.1.4.1.6296.101.25.3.1.1.2INTEGER (1..8)read-onlycurrent
sleVoipSipUserAOR
OBJECT-TYPE
Display address of record.
1.3.6.1.4.1.6296.101.25.3.1.1.3OCTET STRINGread-onlycurrent
sleVoipSipUserDisplayName
OBJECT-TYPE
The username for sip account.
1.3.6.1.4.1.6296.101.25.3.1.1.4OCTET STRINGread-onlycurrent
sleVoipSipUserUserName
OBJECT-TYPE
Display user name for sip account.
1.3.6.1.4.1.6296.101.25.3.1.1.5OCTET STRINGread-onlycurrent
sleVoipSipUserPassword
OBJECT-TYPE
The password for sip account.
1.3.6.1.4.1.6296.101.25.3.1.1.6OCTET STRINGread-onlycurrent
sleVoipSipUserControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.3.2
sleVoipSipUserControlRequest
OBJECT-TYPE
The request of a user command.
1.3.6.1.4.1.6296.101.25.3.2.1INTEGER {enableVoipSipUser(1), disableVoipSipUser(2)}read-writecurrent
sleVoipSipUserControlStatus
OBJECT-TYPE
The status of user command.
1.3.6.1.4.1.6296.101.25.3.2.2SleControlStatusTyperead-onlycurrent
sleVoipSipUserControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.101.25.3.2.3Gauge32read-writecurrent
sleVoipSipUserControlTimeStamp
OBJECT-TYPE
Time stamp attribute set at the end of command
1.3.6.1.4.1.6296.101.25.3.2.4TimeTicksread-onlycurrent
sleVoipSipUserControlReqResult
OBJECT-TYPE
Result of last command
1.3.6.1.4.1.6296.101.25.3.2.5SleControlRequestResultTyperead-onlycurrent
sleVoipSipUserControlIndex
OBJECT-TYPE
Description. Setting Sip user index <1-8>
1.3.6.1.4.1.6296.101.25.3.2.6Unsigned32 (1..8)read-writecurrent
sleVoipSipUserControlAgent
OBJECT-TYPE
Setting the reference to sip which agent.Range is from 1 to 8. (Optional) to explain each group,up to 32 characters string include NULL character.
1.3.6.1.4.1.6296.101.25.3.2.7INTEGER (1..8)read-writecurrent
sleVoipSipUserControlAOR
OBJECT-TYPE
Setting address of record.
1.3.6.1.4.1.6296.101.25.3.2.8OCTET STRINGread-writecurrent
sleVoipSipUserControlDisplayName
OBJECT-TYPE
Setting display-name.
1.3.6.1.4.1.6296.101.25.3.2.9OCTET STRINGread-writecurrent
sleVoipSipUserControlUserName
OBJECT-TYPE
Setting user name for sip account.
1.3.6.1.4.1.6296.101.25.3.2.10OCTET STRINGread-writecurrent
sleVoipSipUserControlPassword
OBJECT-TYPE
Setting password for sip account.
1.3.6.1.4.1.6296.101.25.3.2.11OCTET STRINGread-writecurrent
sleVoipSipUserNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.3.3
sleVoipSipAgent
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.4
sleVoipSipAgentTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.4.1not-accessiblecurrent
sleVoipSipAgentEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.4.1.1not-accessiblecurrent
sleVoipSipAgentIndex
OBJECT-TYPE
The index of Sip agent. Range from 1 to 8.
1.3.6.1.4.1.6296.101.25.4.1.1.1Integer32 (1..8)read-onlycurrent
sleVoipSipAgentServer
OBJECT-TYPE
Set Server for SIP service.IP destination prefix <A.B.C.D> or Domain name.
1.3.6.1.4.1.6296.101.25.4.1.1.2OCTET STRINGread-onlycurrent
sleVoipSipAgentPort
OBJECT-TYPE
Port number (0-65535).
1.3.6.1.4.1.6296.101.25.4.1.1.3Integer32 (0..65535)read-onlycurrent
sleVoipSipAgentTypeOfService
OBJECT-TYPE
Type of service, value is <0-63>.
1.3.6.1.4.1.6296.101.25.4.1.1.4Integer32 (0..63)read-onlycurrent
sleVoipSipAgentTransport
OBJECT-TYPE
Transport protocol (TCP(6)|UDP(17))
1.3.6.1.4.1.6296.101.25.4.1.1.5INTEGER {tcp(6), udp(17)}read-onlycurrent
sleVoipSipAgentRegistrar
OBJECT-TYPE
Register Domain name. <A.B.C.D> or DNS.
1.3.6.1.4.1.6296.101.25.4.1.1.6OCTET STRINGread-onlycurrent
sleVoipSipAgentPrimary
OBJECT-TYPE
Set IPv4 destination prefix.<A.B.C.D> or primary domain name.
1.3.6.1.4.1.6296.101.25.4.1.1.7OCTET STRINGread-onlycurrent
sleVoipSipAgentSecondary
OBJECT-TYPE
Set IPv4 destination prefix.<A.B.C.D> or secondary domain name.
1.3.6.1.4.1.6296.101.25.4.1.1.8OCTET STRINGread-onlycurrent
sleVoipSipAgentProfileName
OBJECT-TYPE
Profile name.
1.3.6.1.4.1.6296.101.25.4.1.1.9OCTET STRINGread-onlycurrent
sleVoipSipAgentExpireTimer
OBJECT-TYPE
Register expire timer. Range from 300 to 360s.
1.3.6.1.4.1.6296.101.25.4.1.1.10Integer32 (300..360)read-onlycurrent
sleVoipSipAgentControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.4.2
sleVoipSipAgentControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.101.25.4.2.1INTEGER {enableSipAgent(1), disableSipAgent(2)}read-writecurrent
sleVoipSipAgentControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.101.25.4.2.2SleControlStatusTyperead-onlycurrent
sleVoipSipAgentControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.101.25.4.2.3Gauge32read-writecurrent
sleVoipSipAgentControlTimeStamp
OBJECT-TYPE
Time stamp attribute set at the end of command
1.3.6.1.4.1.6296.101.25.4.2.4TimeTicksread-onlycurrent
sleVoipSipAgentControlReqResult
OBJECT-TYPE
Result of last command
1.3.6.1.4.1.6296.101.25.4.2.5SleControlRequestResultTyperead-onlycurrent
sleVoipSipAgentControlIndex
OBJECT-TYPE
The index of SIP agent.Range from 1 to 8.
1.3.6.1.4.1.6296.101.25.4.2.6Integer32 (1..8)read-writecurrent
sleVoipSipAgentControlServer
OBJECT-TYPE
Description. (Optional) to explain each group,up to 32 characters string include NULL character. Set IPv4 address destination prefix <A.B.C.D> or Domain name.
1.3.6.1.4.1.6296.101.25.4.2.7OCTET STRINGread-writecurrent
sleVoipSipAgentControlPort
OBJECT-TYPE
Description. (Optional) to explain each group,up to 32 characters string include NULL character.Port number (0-65535).
1.3.6.1.4.1.6296.101.25.4.2.8Integer32read-writecurrent
sleVoipSipAgentControlTypeOfService
OBJECT-TYPE
Description. Type of service, value is Range from 0 to 63..
1.3.6.1.4.1.6296.101.25.4.2.9Integer32 (0..63)read-writecurrent
sleVoipSipAgentControlTransport
OBJECT-TYPE
Description. Transport protocol (TCP|UDP).
1.3.6.1.4.1.6296.101.25.4.2.10INTEGER {tcp(6), udp(17)}read-writecurrent
sleVoipSipAgentControlRegistrar
OBJECT-TYPE
Description. Register Domain name. <A.B.C.D> or DNS..(Optional) to explain each group,up to 32 characters string include NULL character.
1.3.6.1.4.1.6296.101.25.4.2.11OCTET STRINGread-writecurrent
sleVoipSipAgentControlPrimary
OBJECT-TYPE
(Optional) to explain each group,up to 32 characters string include NULL character. Set IPv4 address destination prefix <A.B.C.D> or primary Domain name.
1.3.6.1.4.1.6296.101.25.4.2.12OCTET STRINGread-writecurrent
sleVoipSipAgentControlSecondary
OBJECT-TYPE
Description. (Optional) to explain each group,up to 32 characters string include NULL character. Set IPv4 address destination prefix <A.B.C.D> or secondary Domain name.
1.3.6.1.4.1.6296.101.25.4.2.13OCTET STRINGread-writecurrent
sleVoipSipAgentControlProfileName
OBJECT-TYPE
Profile name setting
1.3.6.1.4.1.6296.101.25.4.2.14OCTET STRINGread-writecurrent
sleVoipSipAgentControlExpireTimer
OBJECT-TYPE
Register expire timer setting. Range from 300 to 360ms.
1.3.6.1.4.1.6296.101.25.4.2.15Integer32 (300..360)read-writecurrent
sleVoipSipAgentNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.4.3
sleVoipMgcpEndpoint
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.5
sleVoipMgcpEndpointTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.5.1not-accessiblecurrent
sleVoipMgcpEndpointEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.5.1.1not-accessiblecurrent
sleVoipMgcpEndpointIndex
OBJECT-TYPE
The index of mgcp endpoint Range from 1 to 8.
1.3.6.1.4.1.6296.101.25.5.1.1.1Unsigned32 (1..8)read-onlycurrent
sleVoipMgcpEndpointAgent
OBJECT-TYPE
Setting the reference to sip which agent,default is 1 Range from 1 to 8.
1.3.6.1.4.1.6296.101.25.5.1.1.2Integer32 (1..8)read-onlycurrent
sleVoipMgcpEndpointName
OBJECT-TYPE
Setting endpoint name for mgcp.
1.3.6.1.4.1.6296.101.25.5.1.1.3OCTET STRINGread-onlycurrent
sleVoipMgcpEndpointControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.5.2
sleVoipMgcpEndpointControlRequest
OBJECT-TYPE
The cpu-pkt-filter request.
1.3.6.1.4.1.6296.101.25.5.2.1INTEGER {enableMgcpEndpoint(1), disableMgcpEndpoint(2)}read-writecurrent
sleVoipMgcpEndpointControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.101.25.5.2.2SleControlStatusTyperead-onlycurrent
sleVoipMgcpEndpointControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.101.25.5.2.3Gauge32read-writecurrent
sleVoipMgcpEndpointControlTimeStamp
OBJECT-TYPE
Time stamp attribute set at the end of command
1.3.6.1.4.1.6296.101.25.5.2.4TimeTicksread-onlycurrent
sleVoipMgcpEndpointControlReqResult
OBJECT-TYPE
Result of last command
1.3.6.1.4.1.6296.101.25.5.2.5SleControlRequestResultTyperead-onlycurrent
sleVoipMgcpEndpointControlIndex
OBJECT-TYPE
The index of mgcp endpoint Range from 1 to 8.
1.3.6.1.4.1.6296.101.25.5.2.6Unsigned32 (1..8)read-writecurrent
sleVoipMgcpEndpointControlAgent
OBJECT-TYPE
Setting the reference to sip which agent,default is 1 Range from 1 to 8.
1.3.6.1.4.1.6296.101.25.5.2.7Integer32 (1..8)read-writecurrent
sleVoipMgcpEndpointControlName
OBJECT-TYPE
(Optional) to explain each group,up to 32 characters string include NULL character. Setting endpoint name for mgcp.
1.3.6.1.4.1.6296.101.25.5.2.8OCTET STRINGread-writecurrent
sleVoipMgcpEndpointNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.5.3
sleVoipMgcpAgent
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.6
sleVoipMgcpAgentTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.6.1not-accessiblecurrent
sleVoipMgcpAgentEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.6.1.1not-accessiblecurrent
sleVoipMgcpAgentIndex
OBJECT-TYPE
DESCRIPTION: Display mgcp agent index .Range from 1 to 8.
1.3.6.1.4.1.6296.101.25.6.1.1.1Integer32 (1..8)read-onlycurrent
sleVoipMgcpCallAgent
OBJECT-TYPE
IP address of destination prefix
1.3.6.1.4.1.6296.101.25.6.1.1.2IpAddressread-onlycurrent
sleVoipMgcpCallAgentPort
OBJECT-TYPE
Description. Agent-Port number, value is from 1-65535.
1.3.6.1.4.1.6296.101.25.6.1.1.3Integer32 (1..65535)read-onlycurrent
sleVoipMgcpAgentPort
OBJECT-TYPE
Local-Port number, value is from 1-65535.
1.3.6.1.4.1.6296.101.25.6.1.1.4Integer32 (1..65535)read-onlycurrent
sleVoipMgcpAgentTOS
OBJECT-TYPE
Type of service .value is from 0-63.
1.3.6.1.4.1.6296.101.25.6.1.1.5Integer32 (0..63)read-onlycurrent
sleVoipMgcpAgentVendor
OBJECT-TYPE
Type of vendor (DSSW:DasanSwitch,MSSW:MetaSwitch,G6SW:G6Switch,CSSW:C15Switch)
1.3.6.1.4.1.6296.101.25.6.1.1.6INTEGER {unknown(0), dssw(1), mssw(2), g6sw(3), cssw(4)}read-onlycurrent
sleVoipMgcpAgentDNS
OBJECT-TYPE
Set Domain name to MGCP agent.
1.3.6.1.4.1.6296.101.25.6.1.1.7OCTET STRINGread-onlycurrent
sleVoipMgcpAgentProfileName
OBJECT-TYPE
The profile name
1.3.6.1.4.1.6296.101.25.6.1.1.8OCTET STRINGread-onlycurrent
sleVoipMgcpAgentControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.6.2
sleVoipMgcpAgentControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.101.25.6.2.1INTEGER {enableVoipMgcpAgent(1), disableVoipMgcpAgent(2)}read-writecurrent
sleVoipMgcpAgentControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.101.25.6.2.2SleControlStatusTyperead-onlycurrent
sleVoipMgcpAgentControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.101.25.6.2.3Gauge32read-writecurrent
sleVoipMgcpAgentControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.101.25.6.2.4TimeTicksread-onlycurrent
sleVoipMgcpAgentControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.101.25.6.2.5SleControlRequestResultTyperead-onlycurrent
sleVoipMgcpAgentControlIndex
OBJECT-TYPE
The index of mgcp agent. Setting mgcp agent index .Range from 1 to 8.
1.3.6.1.4.1.6296.101.25.6.2.6Integer32 (1..8)read-writecurrent
sleVoipMgcpAgentControlCallAgent
OBJECT-TYPE
Setting IP address of destination prefix
1.3.6.1.4.1.6296.101.25.6.2.7OCTET STRINGread-writecurrent
sleVoipMgcpAgentControlCallAgentPort
OBJECT-TYPE
Description. Setting Agent-Port number, value is from 1-65535.
1.3.6.1.4.1.6296.101.25.6.2.8Integer32 (1..65535)read-writecurrent
sleVoipMgcpAgentControlPort
OBJECT-TYPE
Description. Setting local-Port number, value is from 1-65535.
1.3.6.1.4.1.6296.101.25.6.2.9Integer32 (1..65535)read-writecurrent
sleVoipMgcpAgentControlTOS
OBJECT-TYPE
Setting Type of service .value is from 0-63.
1.3.6.1.4.1.6296.101.25.6.2.10Integer32 (0..63)read-writecurrent
sleVoipMgcpAgentControlVendor
OBJECT-TYPE
Setting Type of vendor (DSSW:DasanSwitch,MSSW:MetaSwitch,G6SW:G6Switch,CSSW:C15Switch)
1.3.6.1.4.1.6296.101.25.6.2.11INTEGER {dssw(1), mssw(2), g6sw(3), cssw(4)}read-writecurrent
sleVoipMgcpAgentControlDNS
OBJECT-TYPE
Set domain name to Mgcp Agent. (Optional) to explain each group, up to 32 characters string include Null character.
1.3.6.1.4.1.6296.101.25.6.2.12OCTET STRINGread-writecurrent
sleVoipMgcpAgentControlProfileName
OBJECT-TYPE
The profile name
1.3.6.1.4.1.6296.101.25.6.2.13OCTET STRINGread-writecurrent
sleVoipMgcpAgentNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.6.3
sleVoipPots
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.7
sleVoipPotsStatusTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.7.1not-accessiblecurrent
sleVoipPotsStatusEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.7.1.1not-accessiblecurrent
sleVoipPotsStatusIndex
OBJECT-TYPE
DESCRIPTION: Display status of ports <1-8>
1.3.6.1.4.1.6296.101.25.7.1.1.1Unsigned32 (1..8)read-onlycurrent
sleVoipPotsStatus
OBJECT-TYPE
DESCRIPTION: Setting pots status.Value is idle(0)|twoway(1)|threeway(2)|fax(3)
1.3.6.1.4.1.6296.101.25.7.1.1.2INTEGER {idle(0), twoway(1), threeway(2), fax(3)}read-onlycurrent
sleVoipPotsStatusHookState
OBJECT-TYPE
Hook status. Value is on(0)|off(1)
1.3.6.1.4.1.6296.101.25.7.1.1.3INTEGER {on(0), off(1)}read-onlycurrent
sleVoipPotsStatusRegisterState
OBJECT-TYPE
Register Status. Value is out(0)|in(1)
1.3.6.1.4.1.6296.101.25.7.1.1.4INTEGER {out(0), in(1)}read-onlycurrent
sleVoipMediaProfile
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.8
sleVoipMediaProfileTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.8.1not-accessiblecurrent
sleVoipMediaProfileEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.8.1.1not-accessiblecurrent
sleVoipMediaProfileIndex
OBJECT-TYPE
The index of Media Profile (1..8)
1.3.6.1.4.1.6296.101.25.8.1.1.1Integer32 (1..8)read-onlycurrent
sleVoipMediaProfileCodecSelection
OBJECT-TYPE
Voice codec setting : G711 a-law codec, G711 mu-law codec, G.723 Codec standard, G.729 Codec standard.
1.3.6.1.4.1.6296.101.25.8.1.1.2INTEGER {pcmu(0), g723(4), pcma(8), g729(18)}read-onlycurrent
sleVoipMediaProfilePacketPeriod
OBJECT-TYPE
Packet Period setting. Range value is from 10 to 30 ms. Default value is 10ms.
1.3.6.1.4.1.6296.101.25.8.1.1.3INTEGER (10..30)read-onlycurrent
sleVoipMediaProfileSilenceSuppression
OBJECT-TYPE
Silence suppression setting. Off(0), on(1)
1.3.6.1.4.1.6296.101.25.8.1.1.4INTEGER {off(0), on(1)}read-onlycurrent
sleVoipMediaProfileControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.8.2
sleVoipMediaProfileControlRequest
OBJECT-TYPE
Description. The request of a user command
1.3.6.1.4.1.6296.101.25.8.2.1INTEGER {enableVoipMediaProfile(1), disableVoipMediaProfile(2)}read-writecurrent
sleVoipMediaProfileControlStatus
OBJECT-TYPE
Description. The status of user command
1.3.6.1.4.1.6296.101.25.8.2.2SleControlStatusTyperead-onlycurrent
sleVoipMediaProfileControlTimer
OBJECT-TYPE
Description. The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.101.25.8.2.3Gauge32read-writecurrent
sleVoipMediaProfileControlTimeStamp
OBJECT-TYPE
Description. The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.101.25.8.2.4TimeTicksread-onlycurrent
sleVoipMediaProfileControlReqResult
OBJECT-TYPE
Description. The result of the last user command
1.3.6.1.4.1.6296.101.25.8.2.5SleControlRequestResultTyperead-onlycurrent
sleVoipMediaProfileControlIndex
OBJECT-TYPE
The index of Media Profile (1.8)
1.3.6.1.4.1.6296.101.25.8.2.6Integer32 (1..8)read-writecurrent
sleVoipMediaProfileControlCodecSelection
OBJECT-TYPE
Voice codec : G711 a-law codec, G711 mu-law codec, G.723 Codec standard, G.729 Codec standard.
1.3.6.1.4.1.6296.101.25.8.2.7INTEGER {pcmu(0), g723(4), pcma(8), g729(18)}read-writecurrent
sleVoipMediaProfileControlPacketPeriod
OBJECT-TYPE
Packet Period setting. Range value is from 10 to 30 ms. Default value is 10ms.
1.3.6.1.4.1.6296.101.25.8.2.8Integer32 (10..30)read-writecurrent
sleVoipMediaProfileControlSilenceSuppression
OBJECT-TYPE
Silence suppression setting. Off(0), on(1)
1.3.6.1.4.1.6296.101.25.8.2.9INTEGER {off(0), on(1)}read-writecurrent
sleVoipMediaProfileNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.8.3
sleVoipRtpProfile
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.9
sleVoipRtpProfileInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.9.1
sleVoipRtpProfilePortMin
OBJECT-TYPE
Set the starting local port for RTP. Default value is 30000.
1.3.6.1.4.1.6296.101.25.9.1.1Integer32 (30000..60000)read-onlycurrent
sleVoipRtpProfileDscpMark
OBJECT-TYPE
Marks the DSCP with the given number. Default value is 0.
1.3.6.1.4.1.6296.101.25.9.1.2Integer32 (0..63)read-onlycurrent
sleVoipRtpProfileOob
OBJECT-TYPE
Enable Out-of-band DTMF. When this option is enable, DTMF can be tranferred via RTP or signalling packet depending on the value of dtmf-event is enable or disable,respectively.
1.3.6.1.4.1.6296.101.25.9.1.3INTEGER {off(0), on(1)}read-onlycurrent
sleVoipRtpProfileDtmfEvent
OBJECT-TYPE
Enable DTMF transfer via RTP. If oob-dtmf is disable, this value is ignored.
1.3.6.1.4.1.6296.101.25.9.1.4INTEGER {off(0), on(1)}read-onlycurrent
sleVoipRtpProfileControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.9.2
sleVoipRtpProfileControlRequest
OBJECT-TYPE
Description. The request of a user command
1.3.6.1.4.1.6296.101.25.9.2.1INTEGER {setVoipRtpPortMin(1), setVoipRtpDscp(2), setVoipRtpOob(3), setVoipRtpDtmf(4)}read-writecurrent
sleVoipRtpProfileControlStatus
OBJECT-TYPE
Description. The status of user command
1.3.6.1.4.1.6296.101.25.9.2.2SleControlStatusTyperead-onlycurrent
sleVoipRtpProfileControlTimer
OBJECT-TYPE
Description. The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.101.25.9.2.3Gauge32read-writecurrent
sleVoipRtpProfileControlTimeStamp
OBJECT-TYPE
Description. The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.101.25.9.2.4TimeTicksread-onlycurrent
sleVoipRtpProfileControlReqResult
OBJECT-TYPE
Description. The result of the last user command
1.3.6.1.4.1.6296.101.25.9.2.5SleControlRequestResultTyperead-onlycurrent
sleVoipRtpProfileControlPortMin
OBJECT-TYPE
Set the starting local port for RTP. Default value is 30000.
1.3.6.1.4.1.6296.101.25.9.2.6Integer32 (30000..60000)read-writecurrent
sleVoipRtpProfileControlDscpMark
OBJECT-TYPE
Marks the DSCP with the given number. Default value is 0.
1.3.6.1.4.1.6296.101.25.9.2.7Integer32 (0..63)read-writecurrent
sleVoipRtpProfileControlOob
OBJECT-TYPE
Enable Out-of-band DTMF. When this option is enable, DTMF can be tranferred via RTP or signalling packet depending on the value of dtmf-event is enable or disable,respectively.
1.3.6.1.4.1.6296.101.25.9.2.8INTEGER {off(0), on(1)}read-writecurrent
sleVoipRtpProfileControlDtmfEvent
OBJECT-TYPE
Enable DTMF transfer via RTP. If oob-dtmf is disable, this value is ignored.
1.3.6.1.4.1.6296.101.25.9.2.9INTEGER {off(0), on(1)}read-writecurrent
sleVoipRtpProfileNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.9.3
sleVoipTimer
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.10
sleVoipTimerTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.10.1not-accessiblecurrent
sleVoipTimerEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.10.1.1not-accessiblecurrent
sleVoipTimerIndex
OBJECT-TYPE
Description. Display Timer index. Value is range from 1 to 8
1.3.6.1.4.1.6296.101.25.10.1.1.1Integer32 (1..8)read-onlycurrent
sleVoipTimerCriticalTimeout
OBJECT-TYPE
Critical timeout value (default 0ms)
1.3.6.1.4.1.6296.101.25.10.1.1.2Integer32 (0..15000)read-onlycurrent
sleVoipTimerFirstDigit
OBJECT-TYPE
First Digit Value (default 15000ms)
1.3.6.1.4.1.6296.101.25.10.1.1.3Integer32 (10000..30000)read-onlycurrent
sleVoipTimerIntraDigit
OBJECT-TYPE
Intra Digit value(Default 5000ms)
1.3.6.1.4.1.6296.101.25.10.1.1.4Integer32 (5000..15000)read-onlycurrent
sleVoipTimerControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.10.2
sleVoipTimerControlRequest
OBJECT-TYPE
Description. The request of a user command
1.3.6.1.4.1.6296.101.25.10.2.1INTEGER {enableVoipTimer(1), disableVoipTimer(2)}read-writecurrent
sleVoipTimerControlStatus
OBJECT-TYPE
Description. The status of user command
1.3.6.1.4.1.6296.101.25.10.2.2SleControlStatusTyperead-onlycurrent
sleVoipTimerControlTimer
OBJECT-TYPE
Description. The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.101.25.10.2.3Gauge32read-writecurrent
sleVoipTimerControlTimeStamp
OBJECT-TYPE
Description. The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.101.25.10.2.4TimeTicksread-onlycurrent
sleVoipTimerControlReqResult
OBJECT-TYPE
Description. The result of the last user command
1.3.6.1.4.1.6296.101.25.10.2.5SleControlRequestResultTyperead-onlycurrent
sleVoipTimerControlIndex
OBJECT-TYPE
Description. Setting Timer index. Value is range from 1 to 8
1.3.6.1.4.1.6296.101.25.10.2.6Integer32 (1..8)read-writecurrent
sleVoipTimerControlCriticalTimeout
OBJECT-TYPE
Description. Critical timeout value (default 0ms)
1.3.6.1.4.1.6296.101.25.10.2.7Integer32 (0..15000)read-writecurrent
sleVoipTimerControlFirstDigit
OBJECT-TYPE
Description. First Digit Value (default 15000ms)
1.3.6.1.4.1.6296.101.25.10.2.8Integer32 (10000..30000)read-writecurrent
sleVoipTimerControlIntraDigit
OBJECT-TYPE
Description. Intra Digit value(Default 5000ms)
1.3.6.1.4.1.6296.101.25.10.2.9Integer32 (5000..15000)read-writecurrent
sleVoipTimerNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.10.3
sleVoipDialPlan
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.11
sleVoipDialPlanTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.11.1not-accessiblecurrent
sleVoipDialPlanEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.11.1.1not-accessiblecurrent
sleVoipDialPlanPotStatusIndex
OBJECT-TYPE
Description. Display pots status index. Value is range from 1 to 8
1.3.6.1.4.1.6296.101.25.11.1.1.1Integer32 (1..8)read-onlycurrent
sleVoipDialPlanIndex
OBJECT-TYPE
Description. Dial-plan index. Value is range from 1 to 16
1.3.6.1.4.1.6296.101.25.11.1.1.2Integer32 (1..16)read-onlycurrent
sleVoipDialPlanDigitMap
OBJECT-TYPE
Description. Digit Map string. The format is 0123456789.x
1.3.6.1.4.1.6296.101.25.11.1.1.3OCTET STRINGread-onlycurrent
sleVoipDialPlanControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.11.2
sleVoipDialPlanControlRequest
OBJECT-TYPE
Description. The request of a user command
1.3.6.1.4.1.6296.101.25.11.2.1INTEGER {enableVoipDialPlan(1), disableVoipDialPlan(2)}read-writecurrent
sleVoipDialPlanControlStatus
OBJECT-TYPE
Description. The status of user command
1.3.6.1.4.1.6296.101.25.11.2.2SleControlStatusTyperead-onlycurrent
sleVoipDialPlanControlTimer
OBJECT-TYPE
Description. The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.101.25.11.2.3Gauge32read-writecurrent
sleVoipDialPlanControlTimeStamp
OBJECT-TYPE
Description. The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.101.25.11.2.4TimeTicksread-onlycurrent
sleVoipDialPlanControlReqResult
OBJECT-TYPE
Description. The result of the last user command
1.3.6.1.4.1.6296.101.25.11.2.5SleControlRequestResultTyperead-writecurrent
sleVoipDialPlanControlPotStatusIndex
OBJECT-TYPE
Description. Pots status index. Value is range from 1 to 8
1.3.6.1.4.1.6296.101.25.11.2.6Integer32 (1..8)read-writecurrent
sleVoipDialPlanControlIndex
OBJECT-TYPE
Description. Dial-plan index. Value is range from 1 to 16
1.3.6.1.4.1.6296.101.25.11.2.7Integer32 (1..16)read-writecurrent
sleVoipDialPlanControlDigitMap
OBJECT-TYPE
Description. Digit Map string. The format is 0123456789.x. Characters can be 0123456789.x-[]T
1.3.6.1.4.1.6296.101.25.11.2.8OCTET STRINGread-writecurrent
sleVoipDialPlanNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.11.3
sleVoipStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.25.12
sleVoipStatisticsTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.12.1not-accessiblecurrent
sleVoipStatisticsEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.12.1.1not-accessiblecurrent
sleVoipStatisticsIndex
OBJECT-TYPE
Index of voip pots. Value is range from 1 to 8
1.3.6.1.4.1.6296.101.25.12.1.1.1Integer32 (1..8)read-onlycurrent
sleVoipStatisticsFormat
OBJECT-TYPE
Format revision
1.3.6.1.4.1.6296.101.25.12.1.1.2Unsigned32read-onlycurrent
sleVoipStatisticsCallTimer
OBJECT-TYPE
Call Timer is number of Rx Voice bytes
1.3.6.1.4.1.6296.101.25.12.1.1.3Unsigned32read-onlycurrent
sleVoipStatisticsCurrentPlayoutDelay
OBJECT-TYPE
Current delay, measured in milliseconds
1.3.6.1.4.1.6296.101.25.12.1.1.4Unsigned32read-onlycurrent
sleVoipStatisticsMinPlayoutDelay
OBJECT-TYPE
The minimum playout delay observed during the current voice session
1.3.6.1.4.1.6296.101.25.12.1.1.5Unsigned32read-onlycurrent
sleVoipStatisticsMaxPlayoutDelay
OBJECT-TYPE
The maximum playout delay observed during the current voice session
1.3.6.1.4.1.6296.101.25.12.1.1.6Unsigned32read-onlycurrent
sleVoipStatisticsClockOffset
OBJECT-TYPE
Description. The time offset between the remote source and the current source
1.3.6.1.4.1.6296.101.25.12.1.1.7Unsigned32read-onlycurrent
sleVoipStatisticsPeakJitter
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.25.12.1.1.8Unsigned32read-onlycurrent
sleVoipStatisticsInterpolativeConcealment
OBJECT-TYPE
Description. The duration of voice interpolation to PCM is incremented when the voice decoder interpolates the missing frames to preserve audio continuity.
1.3.6.1.4.1.6296.101.25.12.1.1.9Unsigned32read-onlycurrent
sleVoipStatisticsSilenceConcealment
OBJECT-TYPE
Description. The duration of silence interpolation to PCM is incremented when the voice decoder performs silence concealment of a missing frame.
1.3.6.1.4.1.6296.101.25.12.1.1.10Unsigned32read-onlycurrent
sleVoipStatisticsOverflowDiscard
OBJECT-TYPE
Description. The duration of Jitter Buffer Overflow Discard
1.3.6.1.4.1.6296.101.25.12.1.1.11Unsigned32read-onlycurrent
sleVoipStatisticsEndpointDetectionErrors
OBJECT-TYPE
The number of End-point Detection errors
1.3.6.1.4.1.6296.101.25.12.1.1.12Unsigned32read-onlycurrent
sleVoipStatisticsTxVoicePackets
OBJECT-TYPE
Description. The number of voice packets sent to IP.
1.3.6.1.4.1.6296.101.25.12.1.1.13Unsigned32read-onlycurrent
sleVoipStatisticsTxSignalingPackets
OBJECT-TYPE
Description. The number of packets with payload type Redundant, DTMF or NTE packets sent to IP.
1.3.6.1.4.1.6296.101.25.12.1.1.14Unsigned32read-onlycurrent
sleVoipStatisticsTxComfortNoisePackets
OBJECT-TYPE
Description. Transmit Comfort Noise Packets. The number of SID packets sent to IP.
1.3.6.1.4.1.6296.101.25.12.1.1.15Unsigned32read-onlycurrent
sleVoipStatisticsTotalTransmitDuration
OBJECT-TYPE
Description. The total duration of the voice transmission.
1.3.6.1.4.1.6296.101.25.12.1.1.16Unsigned32read-onlycurrent
sleVoipStatisticsVoiceTransmitDuration
OBJECT-TYPE
Description. The duration of voice transmission when voice is active.
1.3.6.1.4.1.6296.101.25.12.1.1.17Unsigned32read-onlycurrent
sleVoipStatisticsRxVoicePackets
OBJECT-TYPE
Description. The number of voice packets received from IP.
1.3.6.1.4.1.6296.101.25.12.1.1.18Unsigned32read-onlycurrent
sleVoipStatisticsRxSignalingPackets
OBJECT-TYPE
Description. The number of packets with payload type Redundant or DTMF or NTE packets received from IP.
1.3.6.1.4.1.6296.101.25.12.1.1.19Unsigned32read-onlycurrent
sleVoipStatisticsRxComfortNoisePackets
OBJECT-TYPE
Description. Receive Comfort Noise Packets. The number of SID packets received from IP.
1.3.6.1.4.1.6296.101.25.12.1.1.20Unsigned32read-onlycurrent
sleVoipStatisticsTotalReceiveDuration
OBJECT-TYPE
Description. The total duration of the voice transmission.
1.3.6.1.4.1.6296.101.25.12.1.1.21Unsigned32read-onlycurrent
sleVoipStatisticsVoiceReceiveDuration
OBJECT-TYPE
Description. The total duration of the voice receive.
1.3.6.1.4.1.6296.101.25.12.1.1.22Unsigned32read-onlycurrent
sleVoipStatisticsPacketsOutSequence
OBJECT-TYPE
Description. The number of out of sequence packets received from IP.
1.3.6.1.4.1.6296.101.25.12.1.1.23Unsigned32read-onlycurrent
sleVoipStatisticsBadProtocolHeaders
OBJECT-TYPE
Description. Bad Protocol headers. Following packets will be rejected because of a bad protocol header
1.3.6.1.4.1.6296.101.25.12.1.1.24Unsigned32read-onlycurrent
sleVoipStatisticsLatePackets
OBJECT-TYPE
Description. Real Late Packets are defined as packets with sequence numbers that are received after having been declared late.
1.3.6.1.4.1.6296.101.25.12.1.1.25Unsigned32read-onlycurrent
sleVoipStatisticsEarlyPackets
OBJECT-TYPE
Description. Early Packets
1.3.6.1.4.1.6296.101.25.12.1.1.26Unsigned32read-onlycurrent
sleVoipStatisticsRxVoiceOctets
OBJECT-TYPE
Description. Total number of bytes in the received voice packets.
1.3.6.1.4.1.6296.101.25.12.1.1.27Unsigned32read-onlycurrent
sleVoipStatisticsLostPackets
OBJECT-TYPE
Description. The Lost Packet Count is calculated as: Declared Late Packets - Real Late Packets
1.3.6.1.4.1.6296.101.25.12.1.1.28Unsigned32read-onlycurrent
sleVoipStatisticsCurrentTransmitPower
OBJECT-TYPE
Description. Measured power (in dBov) of the signal being sent by the Mindspeed Comcerto Device over the circuit switched network.
1.3.6.1.4.1.6296.101.25.12.1.1.29Unsigned32read-onlycurrent
sleVoipStatisticsMeanTransmitPower
OBJECT-TYPE
Description. Mean Transmit Power. Running mean (average) of measured Tx Powers.
1.3.6.1.4.1.6296.101.25.12.1.1.30Unsigned32read-onlycurrent
sleVoipStatisticsCurrentReceivePower
OBJECT-TYPE
Description. Current Receive Power. Measured power (in dBov) of the signal being received by the Mindspeed Comcerto Device from the circuit switched network.
1.3.6.1.4.1.6296.101.25.12.1.1.31Unsigned32read-onlycurrent
sleVoipStatisticsMeanReceivePower
OBJECT-TYPE
Description. Mean Receive Power .Running mean (average) of measured Rx Powers.
1.3.6.1.4.1.6296.101.25.12.1.1.32Unsigned32read-onlycurrent
sleVoipStatisticsBackgroundNoise
OBJECT-TYPE
Description. Measured power (in dBov) of the estimated background noise level sent by the Comcerto Device over the circuit switched network.
1.3.6.1.4.1.6296.101.25.12.1.1.33Unsigned32read-onlycurrent
sleVoipStatisticsErlLevel
OBJECT-TYPE
Description. The ERL is the attenuation of a signal from the receive-out port to the send-in port of an echo canceller, due to transmission and hybrid loss.
1.3.6.1.4.1.6296.101.25.12.1.1.34Unsigned32read-onlycurrent
sleVoipStatisticsAcomLevel
OBJECT-TYPE
Description. The ACOM is the attenuation of a signal from the receive-out port to the send-out port of an echo canceller,
1.3.6.1.4.1.6296.101.25.12.1.1.35Unsigned32read-onlycurrent
sleVoipStatisticsCurrentTransmitActivity
OBJECT-TYPE
Description. Binary decision indicating whether the signal currently being sent by the Mindspeed Comcerto Device over the circuit switched network is voice (1) or silence (0).
1.3.6.1.4.1.6296.101.25.12.1.1.36Unsigned32read-onlycurrent
sleVoipStatisticsCurrentReceiveActivity
OBJECT-TYPE
Description. Binary decision indicating whether the signal currently being received by the Mindspeed Comcerto Device from the circuit switched network is voice (1) or silence (0).
1.3.6.1.4.1.6296.101.25.12.1.1.37Unsigned32read-onlycurrent

Notifications

NameOIDStatus
sleVoipBaseInterfaceChanged
NOTIFICATION-TYPE
DESCRIPTION:
1.3.6.1.4.1.6296.101.25.1.3.1current
sleVoipBaseProtocolChanged
NOTIFICATION-TYPE
DESCRIPTION:
1.3.6.1.4.1.6296.101.25.1.3.2current
sleVoipBaseRestartStackOnly
NOTIFICATION-TYPE
voipRestartStackOnly
1.3.6.1.4.1.6296.101.25.1.3.3current
sleVoipBaseRestartAll
NOTIFICATION-TYPE
voipRestartAll
1.3.6.1.4.1.6296.101.25.1.3.4current
sleVoipBaseRtcpChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.25.1.3.5current
sleVoipBaseFaxmodeChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.25.1.3.6current
sleVoipVoiceEnabled
NOTIFICATION-TYPE
DESCRIPTION:
1.3.6.1.4.1.6296.101.25.2.3.1current
sleVoipVoiceDisabled
NOTIFICATION-TYPE
DESCRIPTION:
1.3.6.1.4.1.6296.101.25.2.3.2current
sleVoipSipUserEnabled
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.25.3.3.1current
sleVoipSipUserDisabled
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.25.3.3.2current
sleVoipSipAgentEnabled
NOTIFICATION-TYPE
DESCRIPTION:
1.3.6.1.4.1.6296.101.25.4.3.1current
sleVoipSipAgentDisabled
NOTIFICATION-TYPE
DESCRIPTION:
1.3.6.1.4.1.6296.101.25.4.3.2current
sleVoipMgcpEndpointEnabled
NOTIFICATION-TYPE
DESCRIPTION:
1.3.6.1.4.1.6296.101.25.5.3.1current
sleVoipMgcpEndpointDisabled
NOTIFICATION-TYPE
DESCRIPTION:
1.3.6.1.4.1.6296.101.25.5.3.2current
sleVoipMgcpAgentEnabled
NOTIFICATION-TYPE
DESCRIPTION:
1.3.6.1.4.1.6296.101.25.6.3.1current
sleVoipMgcpAgentDisabled
NOTIFICATION-TYPE
DESCRIPTION:
1.3.6.1.4.1.6296.101.25.6.3.2current
sleVoipMediaProfileEnabled
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.25.8.3.1current
sleVoipMediaProfileDisabled
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.25.8.3.2current
sleVoipRtpProfilePortMinChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.25.9.3.1current
sleVoipRtpProfileDscpMarkChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.25.9.3.2current
sleVoipRtpProfileOobChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.25.9.3.3current
sleVoipRtpProfileDtmfEventChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.25.9.3.4current
sleVoipTimerEnabled
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.25.10.3.1current
sleVoipTimerDisabled
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.25.10.3.2current
sleVoipDialPlanEnabled
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.25.11.3.1current
sleVoipDialPlanDisabled
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.25.11.3.2current

Conformance

NameOIDStatus
sleVoipGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.6296.101.25.13current
sleVoipNotificationGroup
NOTIFICATION-GROUP
Description.
1.3.6.1.4.1.6296.101.25.14current