MIBs Depot

SLE-QOS-MIB

Registered at
1.3.6.1.4.1.6296.101.10
Last updated
2004-12-09 17:33
Organization
Hanasoft.
Namespace
dasan
Source file
SLE-QOS-MIB
Digest
sha256:38315eb2381a3da73f0e8380d995d6633527a5e30cfe4238a5b63b9dbdeb2fc3

Description

Description.

Contact

Contact-info.

Imports

FromSymbols
DASAN-SMIsleMgmt
SLE-TC-MIBSleControlRequestResultType, SleControlStatusType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIBITS, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DASAN-SMI
SLE-QOS-MIB
SLE-TC-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
SleBooleanType
type
SlePortScheduleControlRequestType
type
SleQueueControlRequestType
type
SleTrafficProfileControlRequestType
type
SleUserFlowActionType
type
SleUserFlowControlRequestType
type
SleUserFlowMatchType
type

Objects

NameOIDSyntaxAccessStatus
sleQoSBase
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.10.1
sleQoSBaseInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.10.1.1
sleQosUserFlowNum
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.1.1.1Unsigned32read-onlycurrent
sleQosTrafficProfileNum
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.1.1.2Unsigned32read-onlycurrent
sleQosCounterNum
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.1.1.3Unsigned32read-onlycurrent
sleQosQueueNum
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.1.1.4Unsigned32read-onlycurrent
sleQosColorMarkingProfileNum
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.1.1.5Integer32read-onlycurrent
sleQosRuleMode
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.1.1.6INTEGER {default(0), extension(1)}read-onlycurrent
sleQoSBaseControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.10.1.2
sleQoSBaseControlRequest
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.1.2.1INTEGER {setQoSBaseRuleMode(1)}read-writecurrent
sleQoSBaseControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.1.2.2SleControlStatusTyperead-onlycurrent
sleQoSBaseControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.1.2.3Gauge32read-writecurrent
sleQoSBaseControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.1.2.4TimeTicksread-onlycurrent
sleQoSBaseControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.1.2.5SleControlRequestResultTyperead-onlycurrent
sleQoSBaseControlRuleMode
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.1.2.6INTEGER {default(0), extension(1)}read-writecurrent
sleQoSBaseNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.10.1.3
sleTrafficProfile
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.10.2
sleTrafficProfileTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.2.1not-accessiblecurrent
sleTrafficProfileEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.2.1.1not-accessiblecurrent
sleTrafficProfileIndex
OBJECT-TYPE
meter Index
1.3.6.1.4.1.6296.101.10.2.1.1.1Unsigned32 (1..65535)read-onlycurrent
sleTrafficProfileMinBandwidth
OBJECT-TYPE
The value is in unit for 64 kbps
1.3.6.1.4.1.6296.101.10.2.1.1.2Integer32read-onlycurrent
sleTrafficProfileMaxBandwidth
OBJECT-TYPE
The value is in unit for 64 kbps
1.3.6.1.4.1.6296.101.10.2.1.1.3Integer32read-onlycurrent
sleTrafficProfileMaxBurstSize
OBJECT-TYPE
The size of the bucket used for metering
1.3.6.1.4.1.6296.101.10.2.1.1.4Integer32read-onlycurrent
sleTrafficProfileUseCount
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.2.1.1.5Integer32read-onlycurrent
sleTrafficProfileControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.10.2.2
sleTrafficProfileControlRequest
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.2.2.1SleTrafficProfileControlRequestTyperead-writecurrent
sleTrafficProfileControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.2.2.2SleControlStatusTyperead-onlycurrent
sleTrafficProfileControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.2.2.3Gauge32read-writecurrent
sleTrafficProfileControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.2.2.4TimeTicksread-onlycurrent
sleTrafficProfileControlReqResult
OBJECT-TYPE
Result of last command
1.3.6.1.4.1.6296.101.10.2.2.5SleControlRequestResultTyperead-onlycurrent
sleTrafficProfileControlIndex
OBJECT-TYPE
meter Index
1.3.6.1.4.1.6296.101.10.2.2.6Integer32read-writecurrent
sleTrafficProfileControlMinBandwidth
OBJECT-TYPE
The value is in unit for 64 kbps
1.3.6.1.4.1.6296.101.10.2.2.7Integer32read-writecurrent
sleTrafficProfileControlMaxBandwidth
OBJECT-TYPE
The value is in unit for 64 kbps
1.3.6.1.4.1.6296.101.10.2.2.8Integer32read-writecurrent
sleTrafficProfileControlMaxBurstSize
OBJECT-TYPE
The size of the bucket used for metering
1.3.6.1.4.1.6296.101.10.2.2.9Integer32read-writecurrent
sleTrafficProfileNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.10.2.3
sleUserFlow
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.10.3
sleUserFlowTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.1not-accessiblecurrent
sleUserFlowEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.1.1not-accessiblecurrent
sleUserFlowName
OBJECT-TYPE
The name of this user flow.
1.3.6.1.4.1.6296.101.10.3.1.1.1OCTET STRING (SIZE(1..63))read-onlycurrent
sleUserFlowIngressPorts
OBJECT-TYPE
Ingress port number
1.3.6.1.4.1.6296.101.10.3.1.1.2OCTET STRINGread-onlycurrent
sleUserFlowEgressPorts
OBJECT-TYPE
Egress Port Number
1.3.6.1.4.1.6296.101.10.3.1.1.3OCTET STRINGread-onlycurrent
sleUserFlowEthernetType
OBJECT-TYPE
The ethernet type value in incoming frames
1.3.6.1.4.1.6296.101.10.3.1.1.4Integer32 (0..65535)read-onlycurrent
sleUserFlowSrcMacAddr
OBJECT-TYPE
Source MAC address
1.3.6.1.4.1.6296.101.10.3.1.1.5OCTET STRING (SIZE(6))read-onlycurrent
sleUserFlowDstMacAddr
OBJECT-TYPE
Destination MAC address
1.3.6.1.4.1.6296.101.10.3.1.1.6OCTET STRING (SIZE(6))read-onlycurrent
sleUserFlowVlan
OBJECT-TYPE
VLAN ID
1.3.6.1.4.1.6296.101.10.3.1.1.7Integer32 (0..4094)read-onlycurrent
sleUserFlow8021p
OBJECT-TYPE
The value of the IEEE802.1p priority in the packet
1.3.6.1.4.1.6296.101.10.3.1.1.8Integer32 (0..7)read-onlycurrent
sleUserFlowSrcIpAddr
OBJECT-TYPE
The IP address to match against the packet's source IP address.
1.3.6.1.4.1.6296.101.10.3.1.1.9IpAddressread-onlycurrent
sleUserFlowSrcPrefixLength
OBJECT-TYPE
Subnet mask. The length of 0 indicates a match of any address
1.3.6.1.4.1.6296.101.10.3.1.1.10Integer32 (0..31)read-onlycurrent
sleUserFlowDstIpAddr
OBJECT-TYPE
The IP address to match against the packet's destination IP address.
1.3.6.1.4.1.6296.101.10.3.1.1.11IpAddressread-onlycurrent
sleUserFlowDstPrefixLength
OBJECT-TYPE
Subnet mask. The length of 0 indicates a match of any address
1.3.6.1.4.1.6296.101.10.3.1.1.12Integer32 (0..32)read-onlycurrent
sleUserFlowIpPktPriorityType
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.1.1.13INTEGER {ipPrecedence(1), diffServ(2), ipToS(3)}read-onlycurrent
sleUserFlowIpPktPriority
OBJECT-TYPE
The Priority value in incoming IP packet. If sleUserFlowIpPktPriorityType is 1, this value's range is 0-7. If sleUserFlowIpPktPriorityType is 2, this value's range is 0-63. If sleUserFlowIpPktPriorityType is 3, this value's range is 0-255.
1.3.6.1.4.1.6296.101.10.3.1.1.14Integer32 (0..63)read-onlycurrent
sleUserFlowProtocolType
OBJECT-TYPE
The IP protocol type value
1.3.6.1.4.1.6296.101.10.3.1.1.15Integer32 (0..255)read-onlycurrent
sleUserFlowTcpFlag
OBJECT-TYPE
TCP Flags
1.3.6.1.4.1.6296.101.10.3.1.1.16Bits {reserv0(0), reserv1(1), urg(2), ack(3), psh(4), rst(5), syn(6), fin(7)}read-onlycurrent
sleUserFlowSrcL4Port
OBJECT-TYPE
The source L4 port number, only valid for TCP or UDP packets.
1.3.6.1.4.1.6296.101.10.3.1.1.17Integer32 (0..65535)read-onlycurrent
sleUserFlowDstL4Port
OBJECT-TYPE
The destination L4 port number, only valid for TCP or UDP packets.
1.3.6.1.4.1.6296.101.10.3.1.1.18Integer32 (0..65535)read-onlycurrent
sleUserFlowPktLen
OBJECT-TYPE
The packet length of the incoming packet
1.3.6.1.4.1.6296.101.10.3.1.1.19Integer32 (21..65535)read-onlycurrent
sleUserFlowValidFlags
OBJECT-TYPE
User Flow Valid Flags
1.3.6.1.4.1.6296.101.10.3.1.1.20Bits {ufIngressPort(0), ufEgressPort(1), ufEthernetType(2), ufSrcMacAddress(3), ufDstMacAddress(4), ufVlanId(5), uf8021p(6), ufSrcIpAddress(7), ufSrcPrefixLength(8), ufDstIpAddress(9), ufDstPrefixLength(10), ufIpPktPriority(11), ufProtocolType(12), ufTcpFlag(13), ufSrcL4Port(14), ufDstL4Port(15), ufPacketLength(16), ufPriority(17), ufInnerVlanId(18), ufInner8021p(19)}read-onlycurrent
sleUserFlowMatchFlags
OBJECT-TYPE
User Flow Matching Flags
1.3.6.1.4.1.6296.101.10.3.1.1.21Bits {ufIngressPort(0), ufEgressPort(1), ufEthernetType(2), ufSrcMacAddress(3), ufDstMacAddress(4), ufVlanId(5), uf8021p(6), ufSrcIpAddress(7), ufSrcPrefixLength(8), ufDstIpAddress(9), ufDstPrefixLength(10), ufIpPktPriority(11), ufProtocolType(12), ufTcpFlag(13), ufSrcL4Port(14), ufDstL4Port(15), ufPacketLength(16), ufPriority(17)}read-onlycurrent
sleUserFlowPriority
OBJECT-TYPE
The priority of this user flow
1.3.6.1.4.1.6296.101.10.3.1.1.22INTEGER {low(1), medium(2), high(3), highest(4)}read-onlycurrent
sleUserFlowMatchCounterId
OBJECT-TYPE
The counter index to be apply for the matched packets.
1.3.6.1.4.1.6296.101.10.3.1.1.23Integer32read-onlycurrent
sleUserFlowMatchTrafficProfileId
OBJECT-TYPE
The traffic profile index to be apply for the matched packets.
1.3.6.1.4.1.6296.101.10.3.1.1.24Integer32read-onlycurrent
sleUserFlowMatchQueue
OBJECT-TYPE
TThe CoS value to be assign for the nomatched packets
1.3.6.1.4.1.6296.101.10.3.1.1.25Integer32 (0..63)read-onlycurrent
sleUserFlowMatchIpPktPriorityType
OBJECT-TYPE
The Priority type to be applied to incoming IP packet.
1.3.6.1.4.1.6296.101.10.3.1.1.26INTEGER {ipPrecedence(1), diffServ(2), ipToS(3)}read-onlycurrent
sleUserFlowMatchIpPktPriority
OBJECT-TYPE
The Priority value in incoming IP packet. If sleUserFlowMatchIpPktPriorityType is 1, then this value's range is 0-7. If sleUserFlowMatchIpPktPriorityType is 2, then this value's range is 0-63. If sleUserFlowMatchIpPktPriorityType is 3, then this value's range is 0-255.
1.3.6.1.4.1.6296.101.10.3.1.1.27Integer32read-onlycurrent
sleUserFlowMatchRedirPort
OBJECT-TYPE
The port to redirect to a matched packet.
1.3.6.1.4.1.6296.101.10.3.1.1.28Integer32read-onlycurrent
sleUserFlowMatchVid
OBJECT-TYPE
The vlan id to be assigned for the matched packets
1.3.6.1.4.1.6296.101.10.3.1.1.29Integer32 (1..4096)read-onlycurrent
sleUserFlowMatchDstMac
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.1.1.30OCTET STRINGread-onlycurrent
sleUserFlowMatchPortMap
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.1.1.31OCTET STRINGread-onlycurrent
sleUserFlowMatchEgressType
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.1.1.32INTEGER {dmac(0), egressPorts(1), filterPorts(2)}read-onlycurrent
sleUserFlowMatchAction
OBJECT-TYPE
The action to be apply for matched packets.
1.3.6.1.4.1.6296.101.10.3.1.1.33Bits {ufActDeny(0), ufActCopytoCpu(1), ufActSameAsTos(2), ufActSameAsCos(3), ufActMirror(4), ufActCounter(5), ufActTrafficeProfile(6), ufActQueue(7), ufActIpPktPriority(8), ufActRedirPort(9), ufAct8021p(10), ufActVid(11), ufActEgress(12), ufActColorMarking(13), ufActRoute(14), ufActRouteReachability(15)}read-onlycurrent
sleUserFlowNomatchCounterId
OBJECT-TYPE
The counter index to be apply for the nomatched packets.
1.3.6.1.4.1.6296.101.10.3.1.1.34Integer32read-onlycurrent
sleUserFlowNomatchTrafficProfileId
OBJECT-TYPE
The traffic profile index to be apply for the nomatched packets.
1.3.6.1.4.1.6296.101.10.3.1.1.35Integer32read-onlycurrent
sleUserFlowNomatchQueue
OBJECT-TYPE
The CoS value to be assign for the nomatched packets
1.3.6.1.4.1.6296.101.10.3.1.1.36Integer32 (0..7)read-onlycurrent
sleUserFlowNomatchIpPktPriorityType
OBJECT-TYPE
The Priority type to be applied to incoming IP packet, in case nomatched.
1.3.6.1.4.1.6296.101.10.3.1.1.37INTEGER {ipPrecedence(1), diffServ(2), ipToS(3)}read-onlycurrent
sleUserFlowNomatchIpPktPriority
OBJECT-TYPE
The Priority value in incoming IP packet. If sleUserFlowNomatchIpPktPriorityType is 1, then this value's range is 0-7. If sleUserFlowNomatchIpPktPriorityType is 2, then this value's range is 0-63. If sleUserFlowNomatchIpPktPriorityType is 3, then this value's range is 0-255.
1.3.6.1.4.1.6296.101.10.3.1.1.38Integer32read-onlycurrent
sleUserFlowNomatchRedirPort
OBJECT-TYPE
The port to redirect to nomatched packet.
1.3.6.1.4.1.6296.101.10.3.1.1.39Integer32read-onlycurrent
sleUserFlowNomatchVid
OBJECT-TYPE
The vlan id to be assigned for the nomatched packets
1.3.6.1.4.1.6296.101.10.3.1.1.40Integer32 (0..4096)read-onlycurrent
sleUserFlowNomatchAction
OBJECT-TYPE
The action to be apply for nomatched packets.
1.3.6.1.4.1.6296.101.10.3.1.1.41Bits {ufActDeny(0), ufActCopytoCpu(1), ufActSameAsTos(2), ufActSameAsCos(3), ufActMirror(4), ufActCounter(5), ufActTrafficeProfile(6), ufActQueue(7), ufActIpPktPriority(8), ufActRedirPort(9), ufAct8021p(10), ufActVid(11), ufActEgress(12)}read-onlycurrent
sleUserFlowMatchColorMarkingId
OBJECT-TYPE
The colormarking profile index to be apply for the matched packet.
1.3.6.1.4.1.6296.101.10.3.1.1.42Integer32read-onlycurrent
sleUserFlowNomatchColorMarkingId
OBJECT-TYPE
The colormarking profile index to be apply for the unmatched packet. (not supported)
1.3.6.1.4.1.6296.101.10.3.1.1.43Integer32read-onlycurrent
sleUserFlowInnerVlan
OBJECT-TYPE
Inner VLAN ID in QinQ
1.3.6.1.4.1.6296.101.10.3.1.1.44Integer32 (1..4094)read-onlycurrent
sleUserFlowInner8021p
OBJECT-TYPE
The value of the inner IEEE802.1p priority in the packet
1.3.6.1.4.1.6296.101.10.3.1.1.45Integer32 (0..7)read-onlycurrent
sleUserFlowMatchRoutePrimary
OBJECT-TYPE
The policy-based-routing primary route
1.3.6.1.4.1.6296.101.10.3.1.1.46IpAddressread-onlycurrent
sleUserFlowMatchRouteSecondary
OBJECT-TYPE
The policy-based-routing secondary route
1.3.6.1.4.1.6296.101.10.3.1.1.47IpAddressread-onlycurrent
sleUserFlowControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.10.3.2
sleUserFlowControlReqest
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.2.1SleUserFlowControlRequestTyperead-writecurrent
sleUserFlowControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.2.2SleControlStatusTyperead-onlycurrent
sleUserFlowControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.2.3Gauge32read-writecurrent
sleUserFlowControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.2.4TimeTicksread-onlycurrent
sleUserFlowControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.2.5SleControlRequestResultTyperead-onlycurrent
sleUserFlowControlName
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.2.6OCTET STRING (SIZE(1..63))read-writecurrent
sleUserFlowControlIngressPorts
OBJECT-TYPE
Ingress port
1.3.6.1.4.1.6296.101.10.3.2.7OCTET STRINGread-writecurrent
sleUserFlowControlEgressPorts
OBJECT-TYPE
Egress port
1.3.6.1.4.1.6296.101.10.3.2.8OCTET STRINGread-writecurrent
sleUserFlowControlEthernetType
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.2.9Integer32 (0..65535)read-writecurrent
sleUserFlowControlSrcMacAddr
OBJECT-TYPE
Source MAC address
1.3.6.1.4.1.6296.101.10.3.2.10OCTET STRING (SIZE(6))read-writecurrent
sleUserFlowControlDstMacAddr
OBJECT-TYPE
Destination MAC address
1.3.6.1.4.1.6296.101.10.3.2.11OCTET STRING (SIZE(6))read-writecurrent
sleUserFlowControlVlan
OBJECT-TYPE
Vlan ID
1.3.6.1.4.1.6296.101.10.3.2.12Integer32 (1..4096)read-writecurrent
sleUserFlowControl8021p
OBJECT-TYPE
The value of the IEEE802.1p priority in the packet
1.3.6.1.4.1.6296.101.10.3.2.13Integer32 (0..7)read-writecurrent
sleUserFlowControlSrcIpAddr
OBJECT-TYPE
The IP address to match against the packet's source IP address.
1.3.6.1.4.1.6296.101.10.3.2.14IpAddressread-writecurrent
sleUserFlowControlSrcPrefixLength
OBJECT-TYPE
Subnet mask. The length of 0 indicates a match of any address
1.3.6.1.4.1.6296.101.10.3.2.15Integer32read-writecurrent
sleUserFlowControlDstIpAddr
OBJECT-TYPE
The IP address to match against the packet's destination IP address.
1.3.6.1.4.1.6296.101.10.3.2.16IpAddressread-writecurrent
sleUserFlowControlDstPrefixLength
OBJECT-TYPE
Subnet mask. The length of 0 indicates a match of any address
1.3.6.1.4.1.6296.101.10.3.2.17Integer32read-writecurrent
sleUserFlowControlIpPktPriorityType
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.2.18INTEGER {ipPrecedence(1), diffServ(2), ipToS(3)}read-writecurrent
sleUserFlowControlIpPktPriority
OBJECT-TYPE
The Priority value in incoming IP packet. If sleUserFlowControlIpPktPriorityType is 1, this value's range is 0-7. If sleUserFlowControlIpPktPriorityType is 2, this value's range is 0-63. If sleUserFlowControlIpPktPriorityType is 3, this value's range is 0-255.
1.3.6.1.4.1.6296.101.10.3.2.19Integer32read-writecurrent
sleUserFlowControlProtocolType
OBJECT-TYPE
The IP protocol type value
1.3.6.1.4.1.6296.101.10.3.2.20Integer32 (0..255)read-writecurrent
sleUserFlowControlTcpFlag
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.2.21Bits {reserv0(0), reserv1(1), urg(2), ack(3), psh(4), rst(5), syn(6), fin(7)}read-writecurrent
sleUserFlowControlSrcL4Port
OBJECT-TYPE
The source L4 port number, only valid for TCP or UDP packets.
1.3.6.1.4.1.6296.101.10.3.2.22Integer32 (0..65535)read-writecurrent
sleUserFlowControlDstL4Port
OBJECT-TYPE
The destination L4 port number, only valid for TCP or UDP packets.
1.3.6.1.4.1.6296.101.10.3.2.23Integer32 (0..65535)read-writecurrent
sleUserFlowControlPktLen
OBJECT-TYPE
The packet length of the incoming packet
1.3.6.1.4.1.6296.101.10.3.2.24Integer32 (21..65535)read-writecurrent
sleUserFlowControlValidFlag
OBJECT-TYPE
The ICMP type, only valid for ICMP packets.
1.3.6.1.4.1.6296.101.10.3.2.25Bits {ufIngressPort(0), ufEgressPort(1), ufEthernetType(2), ufSrcMacAddress(3), ufDstMacAddress(4), ufVlanId(5), uf8021p(6), ufSrcIpAddress(7), ufSrcPrefixLength(8), ufDstIpAddress(9), ufDstPrefixLength(10), ufIpPktPriority(11), ufProtocolType(12), ufTcpFlag(13), ufSrcL4Port(14), ufDstL4Port(15), ufPacketLength(16), ufPriority(17), ufInnerVlanId(18), ufInner8021p(19)}read-writecurrent
sleUserFlowControlMatchFlag
OBJECT-TYPE
The ICMP code, only valid for ICMP packets.
1.3.6.1.4.1.6296.101.10.3.2.26Bits {ufIngressPort(0), ufEgressPort(1), ufEthernetType(2), ufSrcMacAddress(3), ufDstMacAddress(4), ufVlanId(5), uf8021p(6), ufSrcIpAddress(7), ufSrcPrefixLength(8), ufDstIpAddress(9), ufDstPrefixLength(10), ufIpPktPriority(11), ufProtocolType(12), ufTcpFlag(13), ufSrcL4Port(14), ufDstL4Port(15), ufPacketLength(16), ufPriority(17)}read-writecurrent
sleUserFlowControlPriority
OBJECT-TYPE
The priority of this user flow
1.3.6.1.4.1.6296.101.10.3.2.27INTEGER {low(1), medium(2), high(3), highest(4)}read-writecurrent
sleUserFlowControlMatchCounterId
OBJECT-TYPE
The counter index to be apply for the matched packets.
1.3.6.1.4.1.6296.101.10.3.2.28Integer32read-writecurrent
sleUserFlowControlMatchTrafficProfileId
OBJECT-TYPE
The traffic profile index to be apply for the matched packets.
1.3.6.1.4.1.6296.101.10.3.2.29Integer32read-writecurrent
sleUserFlowControlMatchQueue
OBJECT-TYPE
The CoS value to be assign for the matched packets
1.3.6.1.4.1.6296.101.10.3.2.30Integer32 (0..7)read-writecurrent
sleUserFlowControlMatchIpPktPriorityType
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.2.31INTEGER {ipPrecedence(1), diffServ(2), ipToS(3)}read-writecurrent
sleUserFlowControlMatchIpPktPriority
OBJECT-TYPE
The Priority value in incoming IP packet. If type is 1, then this value's range is 0-7. If type is 2, then this value's range is 0-63. If type is 3, then this value's range is 0-255.
1.3.6.1.4.1.6296.101.10.3.2.32Integer32read-writecurrent
sleUserFlowControlMatchRedirPort
OBJECT-TYPE
The port to redirect to a matched packet.
1.3.6.1.4.1.6296.101.10.3.2.33Integer32read-writecurrent
sleUserFlowControlMatchVid
OBJECT-TYPE
The vlan id to be assigned for the matched packets
1.3.6.1.4.1.6296.101.10.3.2.34Integer32 (1..4096)read-writecurrent
sleUserFlowControlMatchDstMac
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.2.35OCTET STRINGread-writecurrent
sleUserFlowControlMatchPortMap
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.2.36OCTET STRINGread-writecurrent
sleUserFlowControlMatchEgressType
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.2.37INTEGER {dmac(0), egressPorts(1), filterPorts(2)}read-writecurrent
sleUserFlowControlMatchAction
OBJECT-TYPE
The action to be apply for matched packets.
1.3.6.1.4.1.6296.101.10.3.2.38Bits {ufActDeny(0), ufActCopytoCpu(1), ufActSameAsTos(2), ufActSameAsCos(3), ufActMirror(4), ufActCounter(5), ufActTrafficeProfile(6), ufActQueue(7), ufActIpPktPriority(8), ufActRedirPort(9), ufAct8021p(10), ufActVid(11), ufActEgress(12), ufActColorMarking(13), ufActRoute(14), ufActRouteReachability(15)}read-writecurrent
sleUserFlowControlNomatchCounterId
OBJECT-TYPE
The counter index to be apply for the unmatched packets.
1.3.6.1.4.1.6296.101.10.3.2.39Integer32read-writecurrent
sleUserFlowControlNomatchTrafficProfileId
OBJECT-TYPE
The traffic profile index to be apply for the unmatched packets.
1.3.6.1.4.1.6296.101.10.3.2.40Integer32read-writecurrent
sleUserFlowControlNomatchQueue
OBJECT-TYPE
The CoS value to be assign for the unmatched packets
1.3.6.1.4.1.6296.101.10.3.2.41Integer32 (0..7)read-writecurrent
sleUserFlowControlNomatchIpPktPriorityType
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.2.42INTEGER {ipPrecedence(1), diffServ(2), ipToS(3)}read-writecurrent
sleUserFlowControlNomatchIpPktPriority
OBJECT-TYPE
The Priority value in incoming IP packet. If type is 1, then this value's range is 0-7. If type is 2, then this value's range is 0-63. If type is 3, then this value's range is 0-255.
1.3.6.1.4.1.6296.101.10.3.2.43Integer32read-writecurrent
sleUserFlowControlNomatchRedirPort
OBJECT-TYPE
The port to redirect a unmatched packet.
1.3.6.1.4.1.6296.101.10.3.2.44Integer32read-writecurrent
sleUserFlowControlNomatchVid
OBJECT-TYPE
The vlan id to be assigned for the unmatched packets
1.3.6.1.4.1.6296.101.10.3.2.45Integer32 (0..4096)read-writecurrent
sleUserFlowControlNomatchAction
OBJECT-TYPE
The action to be apply for unmatched packets.
1.3.6.1.4.1.6296.101.10.3.2.46Bits {ufActDeny(0), ufActCopytoCpu(1), ufActSameAsTos(2), ufActSameAsCos(3), ufActMirror(4), ufActCounter(5), ufActTrafficeProfile(6), ufActQueue(7), ufActIpPktPriority(8), ufActRedirPort(9), ufAct8021p(10), ufActVid(11), ufActEgress(12)}read-writecurrent
sleUserFlowControlMatchColorMarkingId
OBJECT-TYPE
The color marking profile index to be apply for the matched packet.
1.3.6.1.4.1.6296.101.10.3.2.47Integer32read-writecurrent
sleUserFlowControlNomatchColorMarkingId
OBJECT-TYPE
The color marking profile index to be apply for the nomatched packet.
1.3.6.1.4.1.6296.101.10.3.2.48Integer32read-writecurrent
sleUserFlowControlInnerVlan
OBJECT-TYPE
Inner VLAN ID
1.3.6.1.4.1.6296.101.10.3.2.49Integer32 (1..4094)read-writecurrent
sleUserFlowControlInner8021p
OBJECT-TYPE
The value of the Inner IEEE802.1p priority in the packet
1.3.6.1.4.1.6296.101.10.3.2.50Integer32 (0..7)read-writecurrent
sleUserFlowControlMatchRoutePrimary
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.2.51IpAddressread-writecurrent
sleUserFlowControlMatchRouteSecondary
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.2.52IpAddressread-writecurrent
sleUserFlowNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.10.3.3
slePortSchedule
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.10.4
slePortSchedultTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.4.1not-accessiblecurrent
slePortSchedultEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.4.1.1not-accessiblecurrent
slePortSchedulInterfaceIndex
OBJECT-TYPE
Interface Index
1.3.6.1.4.1.6296.101.10.4.1.1.1Integer32 (1..256)read-onlycurrent
slePortScheduleMode
OBJECT-TYPE
The scheduling mode of port
1.3.6.1.4.1.6296.101.10.4.1.1.2INTEGER {strictqueueing(1), wrr(2), wfq(3), rr(4), drr(5)}read-onlycurrent
slePortScheduleControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.10.4.2
slePortScheduleControlRequest
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.4.2.1SlePortScheduleControlRequestTyperead-writecurrent
sleScheduleControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.4.2.2SleControlStatusTyperead-onlycurrent
slePortScheduleControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.4.2.3Gauge32read-writecurrent
slePortScheduleControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.4.2.4TimeTicksread-onlycurrent
slePortScheduleControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.4.2.5SleControlRequestResultTyperead-onlycurrent
slePortScheduleControlInterfaceIndex
OBJECT-TYPE
Interface Index
1.3.6.1.4.1.6296.101.10.4.2.6Integer32read-writecurrent
slePortScheduleControlMode
OBJECT-TYPE
The scheduling mode of port
1.3.6.1.4.1.6296.101.10.4.2.7INTEGER {strictqueueing(1), wrr(2), wfq(3), rr(4), drr(5)}read-writecurrent
slePortScheduleNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.10.4.3
sleQueue
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.10.5
sleQueueTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.5.1not-accessiblecurrent
sleQueueEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.5.1.1not-accessiblecurrent
sleQueueId
OBJECT-TYPE
queue index
1.3.6.1.4.1.6296.101.10.5.1.1.1Integer32 (0..7)read-onlycurrent
sleQueueREDEnable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.5.1.1.2INTEGER {disable(0), enable(1)}read-onlycurrent
sleQueueMappedCoS
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.5.1.1.3Bits {cos0(0), cos1(1), cos2(2), cos3(3), cos4(4), cos5(5), cos6(6), cos7(7)}read-onlycurrent
sleQueueWREDMinThreshold
OBJECT-TYPE
The total number of packets where WRED can start
1.3.6.1.4.1.6296.101.10.5.1.1.4Integer32read-onlycurrent
sleQueueWREDMaxThreshold
OBJECT-TYPE
Above max threshold, queue drops all ingress
1.3.6.1.4.1.6296.101.10.5.1.1.5Integer32read-onlycurrent
sleQueueWREDProbMax
OBJECT-TYPE
The worst case random drop probability
1.3.6.1.4.1.6296.101.10.5.1.1.6Integer32 (1..15)read-onlycurrent
sleQueueMinBandwidth
OBJECT-TYPE
The value is unit of 64kbps
1.3.6.1.4.1.6296.101.10.5.1.1.7Integer32read-onlycurrent
sleQueueMaxBandwidth
OBJECT-TYPE
The value is unit of 64 kbps.
1.3.6.1.4.1.6296.101.10.5.1.1.8Integer32read-onlycurrent
sleQueueWeight
OBJECT-TYPE
The weight of this queue. The value of -1 is unlimited
1.3.6.1.4.1.6296.101.10.5.1.1.9Integer32 (-1 | 1..255)read-onlycurrent
sleQueueMaxLatency
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.5.1.1.10Integer32read-onlycurrent
sleQueueMaxPackets
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.5.1.1.11Integer32read-onlycurrent
sleQueueQuantum
OBJECT-TYPE
The DRR quantum value.
1.3.6.1.4.1.6296.101.10.5.1.1.12INTEGER (-1 | 1..127)read-onlycurrent
sleQueueUsedPkts
OBJECT-TYPE
The used packets of port/queue.
1.3.6.1.4.1.6296.101.10.5.1.1.13Counter32read-onlycurrent
sleQueueUsedBytes
OBJECT-TYPE
The used bytes of port/queue.
1.3.6.1.4.1.6296.101.10.5.1.1.14Counter32read-onlycurrent
sleQueueControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.10.5.2
sleQueueControlRequest
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.5.2.1INTEGER {setQueueProfile(1), setQuantum(2)}read-writecurrent
sleQueueControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.5.2.2Integer32read-onlycurrent
sleQueueControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.5.2.3Gauge32read-writecurrent
sleQueueControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.5.2.4Integer32read-onlycurrent
sleQueueControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.5.2.5SleControlRequestResultTyperead-onlycurrent
sleQueueControlInterfaceIndex
OBJECT-TYPE
Interface Index
1.3.6.1.4.1.6296.101.10.5.2.6Integer32read-writecurrent
sleQueueControlId
OBJECT-TYPE
Queue index
1.3.6.1.4.1.6296.101.10.5.2.7Integer32 (0..7)read-writecurrent
sleQueueControlREDEnable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.5.2.8INTEGER {disable(0), enable(1)}read-writecurrent
sleQueueControlMappedCoS
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.5.2.9Bits {cos0(0), cos1(1), cos2(2), cos3(3), cos4(4), cos5(5), cos6(6), cos7(7)}read-writecurrent
sleQueueControlWREDMinThreshold
OBJECT-TYPE
The total number of packets where WRED can start
1.3.6.1.4.1.6296.101.10.5.2.10Integer32read-writecurrent
sleQueueControlWREDMaxThreshold
OBJECT-TYPE
Above max threshold, queue drops all ingress
1.3.6.1.4.1.6296.101.10.5.2.11Integer32read-writecurrent
sleQueueControlWREDProbMax
OBJECT-TYPE
The worst case random drop probability
1.3.6.1.4.1.6296.101.10.5.2.12Integer32 (1..15)read-writecurrent
sleQueueControlMinBandwidth
OBJECT-TYPE
The value is unit of 64kbps
1.3.6.1.4.1.6296.101.10.5.2.13Integer32read-writecurrent
sleQueueControlMaxBandwidth
OBJECT-TYPE
The value is unit of 64kbps
1.3.6.1.4.1.6296.101.10.5.2.14Integer32read-writecurrent
sleQueueControlWeight
OBJECT-TYPE
The weight of this queue. The value of -1 is unlimited
1.3.6.1.4.1.6296.101.10.5.2.15Integer32 (-1 | 1..255)read-writecurrent
sleQueueControlMaxLatency
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.5.2.16Integer32read-writecurrent
sleQueueControlMaxPackets
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.5.2.17Integer32read-writecurrent
sleQueueControlQuantum
OBJECT-TYPE
The DRR quantum value.
1.3.6.1.4.1.6296.101.10.5.2.18INTEGER (-1 | 1..127)read-writecurrent
sleQueueNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.10.5.3
sleCounter
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.10.6
sleCounterTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.6.1not-accessiblecurrent
sleCounterEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.6.1.1not-accessiblecurrent
sleCounterIndex
OBJECT-TYPE
The Counter Index
1.3.6.1.4.1.6296.101.10.6.1.1.1INTEGER (1..255)read-onlycurrent
sleCounterPackets
OBJECT-TYPE
Number of packets
1.3.6.1.4.1.6296.101.10.6.1.1.2Unsigned32read-onlycurrent
sleCounterControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.10.6.2
sleCounterControlRequest
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.6.2.1INTEGER {clearCounter(1)}read-writecurrent
sleCounterControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.6.2.2SleControlStatusTyperead-onlycurrent
sleCounterControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.6.2.3Gauge32read-writecurrent
sleCounterControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.6.2.4TimeTicksread-onlycurrent
sleCounterControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.6.2.5SleControlRequestResultTyperead-onlycurrent
sleCounterControlIndex
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.6.2.6Unsigned32 (1..32)read-writecurrent
sleCounterNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.10.6.3
sleColorMarking
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.10.7
sleColorMarkingTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.7.1not-accessiblecurrent
sleColorMarkingEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.7.1.1not-accessiblecurrent
sleColorMarkingIndex
OBJECT-TYPE
Color marking table index.
1.3.6.1.4.1.6296.101.10.7.1.1.1INTEGER (1..2048)read-onlycurrent
sleColorMarkingType
OBJECT-TYPE
Color marking type. srTCM = Single Rate Three Color Marking. trTCM = Two Rate Three Color Marking.
1.3.6.1.4.1.6296.101.10.7.1.1.2INTEGER {srTCM(0), trTCM(1)}read-onlycurrent
sleColorMarkingMode
OBJECT-TYPE
Color marking mode.
1.3.6.1.4.1.6296.101.10.7.1.1.3INTEGER {blind(0), aware(1)}read-onlycurrent
sleColorMarkingAwareMode
OBJECT-TYPE
Color marking aware mode. Used only when sleColorMarkingMode is aware.
1.3.6.1.4.1.6296.101.10.7.1.1.4INTEGER {unprotected(1), protected(2)}read-onlycurrent
sleColorMarkingCIR
OBJECT-TYPE
Committed Information Rate. The value is in unit for 64 kbps.
1.3.6.1.4.1.6296.101.10.7.1.1.5Integer32 (1..1000000)read-onlycurrent
sleColorMarkingCBS
OBJECT-TYPE
Committed Burst Size. The value is in unit for square of 2 bits.
1.3.6.1.4.1.6296.101.10.7.1.1.6Integer32 (1..4000)read-onlycurrent
sleColorMarkingPIR
OBJECT-TYPE
Peak Information Rate. *) Used only when sleColorMarkingMode is Aware. The value is in unit for 64 kbps. .
1.3.6.1.4.1.6296.101.10.7.1.1.7Integer32 (1..1000000)read-onlycurrent
sleColorMarkingPBS
OBJECT-TYPE
Peak Burst Size. *) Used only when sleColorMarkingMode is Aware. The value is in unit for square of 2 bits.
1.3.6.1.4.1.6296.101.10.7.1.1.8Integer32 (1..4000)read-onlycurrent
sleColorMarkingEBS
OBJECT-TYPE
Excess Burst Size. *) Used only when sleColorMarkingMode is Blind. The value is in unit for square of 2 bits.
1.3.6.1.4.1.6296.101.10.7.1.1.9Integer32 (1..4000)read-onlycurrent
sleColorMarkingRedAction
OBJECT-TYPE
The action to be apply when incoming packet is colored in red.
1.3.6.1.4.1.6296.101.10.7.1.1.10Bits {reserve0(0), reserve1(1), reserve2(2), reserve3(3), reserve4(4), dropProcedence(5), marking(6), drop(7), dropPrecedenceGreen(8), dropPrecedenceYellow(9), dropPrecedenceRed(10)}read-onlycurrent
sleColorMarkingYellowAction
OBJECT-TYPE
The action to be apply when incoming packet is colored in yellow.
1.3.6.1.4.1.6296.101.10.7.1.1.11Bits {reserve0(0), reserve1(1), reserve2(2), reserve3(3), reserve4(4), dropProcedence(5), marking(6), drop(7), dropPrecedenceGreen(8), dropPrecedenceYellow(9), dropPrecedenceRed(10)}read-onlycurrent
sleColorMarkingGreenAction
OBJECT-TYPE
The action to be apply when incoming packet is colored in green. (not supported)
1.3.6.1.4.1.6296.101.10.7.1.1.12Bits {reserve0(0), reserve1(1), reserve2(2), reserve3(3), reserve4(4), dropProcedence(5), marking(6), drop(7), dropPrecedenceGreen(8), dropPrecedenceYellow(9), dropPrecedenceRed(10)}read-onlycurrent
sleColorMarkingRedDscp
OBJECT-TYPE
The dscp value to be apply when incoming packet is colored in red.
1.3.6.1.4.1.6296.101.10.7.1.1.13Integer32 (0..63)read-onlycurrent
sleColorMarkingYellowDscp
OBJECT-TYPE
The dscp value to be apply when incoming packet is colored in yellow.
1.3.6.1.4.1.6296.101.10.7.1.1.14Integer32 (0..63)read-onlycurrent
sleColorMarkingGreenDscp
OBJECT-TYPE
The dscp value to be apply when incoming packet is colored in green. (not supported)
1.3.6.1.4.1.6296.101.10.7.1.1.15Integer32 (0..63)read-onlycurrent
sleColorMarkingUseCount
OBJECT-TYPE
The number of rules used this color marking profile.
1.3.6.1.4.1.6296.101.10.7.1.1.16Integer32read-onlycurrent
sleColorMarkingControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.10.7.2
sleColorMarkingControlReqest
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.7.2.1INTEGER {setColorMarkingProfile(1)}read-writecurrent
sleColorMarkingControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.7.2.2SleControlStatusTyperead-writecurrent
sleColorMarkingControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.7.2.3Gauge32read-writecurrent
sleColorMarkingControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.7.2.4TimeTicksread-onlycurrent
sleColorMarkingControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.10.7.2.5SleControlRequestResultTyperead-writecurrent
sleColorMarkingControlIndex
OBJECT-TYPE
Color marking table index
1.3.6.1.4.1.6296.101.10.7.2.6Integer32 (1..2048)read-writecurrent
sleColorMarkingControlType
OBJECT-TYPE
Color marking type. srTCM = Single Rate Three Color Marking. trTCM = Two Rate Three Color Marking.
1.3.6.1.4.1.6296.101.10.7.2.7INTEGER {srTCM(0), trTCM(1)}read-writecurrent
sleColorMarkingControlMode
OBJECT-TYPE
Color marking mode
1.3.6.1.4.1.6296.101.10.7.2.8INTEGER {blind(0), aware(1)}read-writecurrent
sleColorMarkingControlAwareMode
OBJECT-TYPE
Color marking aware mode. Used only when sleColorMarkingControlMode is aware.
1.3.6.1.4.1.6296.101.10.7.2.9INTEGER {unprotected(1), protected(2)}read-writecurrent
sleColorMarkingControlCIR
OBJECT-TYPE
Committed Information Rate. The value is in unit for 64 kbps
1.3.6.1.4.1.6296.101.10.7.2.10Integer32 (1..1000000)read-writecurrent
sleColorMarkingControlCBS
OBJECT-TYPE
Committed Burst Size. The value is in unit for square of 2 bits.
1.3.6.1.4.1.6296.101.10.7.2.11Integer32 (1..4000)read-writecurrent
sleColorMarkingControlPIR
OBJECT-TYPE
Peak Information Rate. *) Used only when sleColorMarkingMode is Aware. The value is in unit for 64 kbps.
1.3.6.1.4.1.6296.101.10.7.2.12Integer32 (1..1000000)read-writecurrent
sleColorMarkingControlPBS
OBJECT-TYPE
Peak Burst Size. *) Used only when sleColorMarkingMode is Aware. The value is in unit for square of 2 bits.
1.3.6.1.4.1.6296.101.10.7.2.13Integer32 (1..4000)read-writecurrent
sleColorMarkingControlEBS
OBJECT-TYPE
Excess Burst Size. *) Used only when sleColorMarkingMode is Blind. The value is in unit for square of 2 bits.
1.3.6.1.4.1.6296.101.10.7.2.14Integer32 (1..4000)read-writecurrent
sleColorMarkingControlRedAction
OBJECT-TYPE
The action to be apply when incoming packet is colored in red.
1.3.6.1.4.1.6296.101.10.7.2.15Bits {reserve0(0), reserve1(1), reserve2(2), reserve3(3), reserve4(4), dropProcedence(5), marking(6), drop(7), dropPrecedenceGreen(8), dropPrecedenceYellow(9), dropPrecedenceRed(10)}read-writecurrent
sleColorMarkingControlYellowAction
OBJECT-TYPE
The action to be apply when incoming packet is colored in yellow.
1.3.6.1.4.1.6296.101.10.7.2.16Bits {reserve0(0), reserve1(1), reserve2(2), reserve3(3), reserve4(4), dropProcedence(5), marking(6), drop(7), dropPrecedenceGreen(8), dropPrecedenceYellow(9), dropPrecedenceRed(10)}read-writecurrent
sleColorMarkingControlGreenAction
OBJECT-TYPE
The action to be apply when incoming packet is colored in green. (not supported)
1.3.6.1.4.1.6296.101.10.7.2.17Bits {reserve0(0), reserve1(1), reserve2(2), reserve3(3), reserve4(4), dropProcedence(5), marking(6), drop(7), dropPrecedenceGreen(8), dropPrecedenceYellow(9), dropPrecedenceRed(10)}read-writecurrent
sleColorMarkingControlRedDscp
OBJECT-TYPE
The dscp value to be apply when incoming packet is colored in red.
1.3.6.1.4.1.6296.101.10.7.2.18Integer32 (0..63)read-writecurrent
sleColorMarkingControlYellowDscp
OBJECT-TYPE
The dscp value to be apply when incoming packet is colored in yellow.
1.3.6.1.4.1.6296.101.10.7.2.19Integer32 (0..63)read-writecurrent
sleColorMarkingControlGreenDscp
OBJECT-TYPE
The dscp value to be apply when incoming packet is colored in green. (not supported)
1.3.6.1.4.1.6296.101.10.7.2.20Integer32 (0..63)read-writecurrent
sleColorMarkingNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.10.7.3

Notifications

NameOIDStatus
sleQoSBaseRuleModeChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.10.1.3.1current
sleTrafficProfileChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.10.2.3.1current
sleUserFlowCreated
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.3.1current
sleUserFlowDestroyed
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.3.2current
sleUserFlowClassifierProfileChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.3.3current
sleUserFlowMatchActionProfileChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.3.4current
sleUserFlowNomatchActionProfileChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.10.3.3.5current
slePortScheduleModeChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.10.4.3.1current
sleQueueProfileChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.10.5.3.1current
sleQueueQuantumChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.10.5.3.2current
sleCounterCleared
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.10.6.3.1current
sleColorMarkingProfileChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.10.7.3.1current

Conformance

NameOIDStatus
sleQoSGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.6296.101.10.8current
sleQoSControlGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.6296.101.10.9current
sleQoSNotificationGroup
NOTIFICATION-GROUP
Description.
1.3.6.1.4.1.6296.101.10.11current