MIBs Depot

SLE-PM-MIB

Registered at
1.3.6.1.4.1.6296.101.94
Last updated
2015-11-30 00:00
Organization
Revisions
2015-11-30 00:00
Namespace
dasan
Source file
SLE-PM-MIB
Digest
sha256:deb948ab4564de343c3ddf230a55f60a44c5841f7251552a51bada9d75f417a0

Description

This MIB contains all needed informations about Performance Manager.

Imports

FromSymbols
DASAN-SMIsleMgmt
SLE-TC-MIBSleControlRequestResultType, SleControlStatusType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Counter64, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, zeroDotZero
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DASAN-SMI
SLE-PM-MIB
SLE-TC-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
PmClassId
TEXTUAL-CONVENTION
Description.
current
PmDateTime
TEXTUAL-CONVENTION
TOD integer value
current
PmId
TEXTUAL-CONVENTION
Current PM ID
current
PmSrc
TEXTUAL-CONVENTION
|type|length|value|type|length|value|.... type (1-byte) : PM location type length(1-byte) : PM location value length value (length-bytes) : PM location value
current
PmTcaState
TEXTUAL-CONVENTION
This status explains whether TRAP status is enabled or disabled. Enable(1) : TCA State is Enabled. Hence TRAPs will be sent for this. Disable(0) : TCA State is Disabled. So TCA won't be notified to user.
current

Objects

NameOIDSyntaxAccessStatus
slePmNeId
OBJECT-TYPE
system MAC address
1.3.6.1.4.1.6296.101.94.1OCTET STRING (SIZE(6))read-onlycurrent
slePmConfigBase
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.94.2
slePmConfigTable
OBJECT-TYPE
This table is the Performance Config table. It gets populated when system init is done. And it contains all the class performance supported for the device
1.3.6.1.4.1.6296.101.94.2.1not-accessiblecurrent
slePmConfigEntry
OBJECT-TYPE
1.3.6.1.4.1.6296.101.94.2.1.1not-accessiblecurrent
slePmConfigSeqId
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.94.2.1.1.1INTEGER (1..65535)read-onlycurrent
slePmConfigClassId
OBJECT-TYPE
Class ID starts from 1 to 255 for the system. And these IDs are generated internally
1.3.6.1.4.1.6296.101.94.2.1.1.2PmClassIdread-onlycurrent
slePmConfigPmId
OBJECT-TYPE
Current PM ID
1.3.6.1.4.1.6296.101.94.2.1.1.3PmIdread-onlycurrent
slePmConfigSource
OBJECT-TYPE
|type|length|value|type|length|value|.... type (1-byte) : PM location type length(1-byte) : PM location value length value (length-bytes) : PM location value
1.3.6.1.4.1.6296.101.94.2.1.1.4PmSrcread-onlycurrent
slePmConfigTcaStat
OBJECT-TYPE
TCA status TCA Normal (0) TCA Occur (1)
1.3.6.1.4.1.6296.101.94.2.1.1.5INTEGER {tcaNormal(0), tcaOccur(1)}read-onlycurrent
slePmConfigTcaEnable
OBJECT-TYPE
TCA enable Confguration : enabled or disabled. Enable(1) : TCA State is Enabled. Hence TRAPs will be sent for this. Disable(0) : TCA State is Disabled. So TCA won't be notified to user.
1.3.6.1.4.1.6296.101.94.2.1.1.6PmTcaStateread-onlycurrent
slePmConfigTh15Min
OBJECT-TYPE
15minute Performance TCA threshold configuration count
1.3.6.1.4.1.6296.101.94.2.1.1.7Counter64read-onlycurrent
slePmConfigTh1Day
OBJECT-TYPE
1day Performance TCA threshold configuration count
1.3.6.1.4.1.6296.101.94.2.1.1.8Counter64read-writecurrent
slePmConfigControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.94.2.2
slePmConfigControlRequest
OBJECT-TYPE
The configuration commands, and user can configure functions via setting this entry as proper value.
1.3.6.1.4.1.6296.101.94.2.2.1INTEGER {setPmConfigTcaEnable(1), setPmConfigTh15Min(2), setPmConfigTh1Day(3)}read-writecurrent
slePmConfigControlStatus
OBJECT-TYPE
status of user command. User have to check this value as .busy. or .idle. before do setRequest.
1.3.6.1.4.1.6296.101.94.2.2.2SleControlStatusTyperead-onlycurrent
slePmConfigControlTimer
OBJECT-TYPE
the wait-time until setRequest end. In case of short-time command, this value is 0
1.3.6.1.4.1.6296.101.94.2.2.3Gauge32read-writecurrent
slePmConfigControlTimeStamp
OBJECT-TYPE
the time stamp of the last command. (don.t care)
1.3.6.1.4.1.6296.101.94.2.2.4TimeTicksread-onlycurrent
slePmConfigControlReqResult
OBJECT-TYPE
Result of the last command.
1.3.6.1.4.1.6296.101.94.2.2.5SleControlRequestResultTyperead-onlycurrent
slePmConfigControlSeqId
OBJECT-TYPE
PM Manager Class ID
1.3.6.1.4.1.6296.101.94.2.2.6Integer32read-writecurrent
slePmConfigControlTcaEnable
OBJECT-TYPE
TCA enable Confguration : enabled or disabled. Enable(1) : TCA State is Enabled. Hence TRAPs will be sent for this. Disable(0) : TCA State is Disabled. So TCA won't be notified to user.
1.3.6.1.4.1.6296.101.94.2.2.7PmTcaStateread-writecurrent
slePmConfigControlTh15Min
OBJECT-TYPE
15minute Performance TCA threshold configuration count
1.3.6.1.4.1.6296.101.94.2.2.8Counter64read-writecurrent
slePmConfigControlTh1Day
OBJECT-TYPE
1day Performance TCA threshold configuration count
1.3.6.1.4.1.6296.101.94.2.2.9Counter64read-writecurrent
slePmConfigNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.94.2.3
slePmCurrentBase
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.94.3
slePmCurrentTable
OBJECT-TYPE
This table contains the current PM count.
1.3.6.1.4.1.6296.101.94.3.1not-accessiblecurrent
slePmCurrentEntry
OBJECT-TYPE
1.3.6.1.4.1.6296.101.94.3.1.1not-accessiblecurrent
slePmCurrentSeqId
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.94.3.1.1.1INTEGER (1..65535)read-onlycurrent
slePmCurrentClassId
OBJECT-TYPE
Current Class ID
1.3.6.1.4.1.6296.101.94.3.1.1.2PmClassIdread-onlycurrent
slePmCurrentPmId
OBJECT-TYPE
Current PM ID
1.3.6.1.4.1.6296.101.94.3.1.1.3PmIdread-onlycurrent
slePmCurrentSource
OBJECT-TYPE
|type|length|value|type|length|value|.... type (1-byte) : PM location type length(1-byte) : PM location value length value (length-bytes) : PM location value
1.3.6.1.4.1.6296.101.94.3.1.1.4PmSrcread-onlycurrent
slePmCurrentTerm
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.94.3.1.1.5INTEGER {min15(1), day1(2)}read-writecurrent
slePmCurrentPmCount
OBJECT-TYPE
Current Performance count
1.3.6.1.4.1.6296.101.94.3.1.1.6Counter64read-onlycurrent
slePmCurrentAccSecond
OBJECT-TYPE
Current Performance data accumulation seconds(count)
1.3.6.1.4.1.6296.101.94.3.1.1.7Counter32read-onlycurrent
slePmCurrentTcaStat
OBJECT-TYPE
TCA status TCA Normal (0) TCA Occur (1)
1.3.6.1.4.1.6296.101.94.3.1.1.8INTEGER {tcaNormal(0), tcaOccur(1)}read-onlycurrent
slePmCurrentTcaTime
OBJECT-TYPE
Current PM Time and Date
1.3.6.1.4.1.6296.101.94.3.1.1.9TimeTicksread-onlycurrent
slePmCurrentControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.94.3.2
slePmCurrentControlRequest
OBJECT-TYPE
The configuration commands, and user can configure functions via setting this entry as proper value. clearCurrentPm(1): Clears the current Performance count (both 15min and 1day) PM history(accumulation) count is not cleared clearCurrentTca(2): Clears the current Performance TCA flag (both 15min and 1day)
1.3.6.1.4.1.6296.101.94.3.2.1INTEGER {clearCurrentPm(1), clearCurrentTca(2)}read-writecurrent
slePmCurrentControlStatus
OBJECT-TYPE
status of user command. User have to check this value as .busy. or .idle. before do setRequest.
1.3.6.1.4.1.6296.101.94.3.2.2SleControlStatusTyperead-onlycurrent
slePmCurrentControlTimer
OBJECT-TYPE
the wait-time until setRequest end. In case of short-time command, this value is 0
1.3.6.1.4.1.6296.101.94.3.2.3Gauge32read-writecurrent
slePmCurrentControlTimeStamp
OBJECT-TYPE
the time stamp of the last command. (don.t care)
1.3.6.1.4.1.6296.101.94.3.2.4TimeTicksread-onlycurrent
slePmCurrentControlReqResult
OBJECT-TYPE
Result of the last command.
1.3.6.1.4.1.6296.101.94.3.2.5SleControlRequestResultTyperead-onlycurrent
slePmCurrentNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.94.3.3
slePMHistoryBase
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.94.4
slePmHistoryTable
OBJECT-TYPE
This Table is used to for keeping the PM History
1.3.6.1.4.1.6296.101.94.4.1not-accessiblecurrent
slePmHistoryEntry
OBJECT-TYPE
1.3.6.1.4.1.6296.101.94.4.1.1not-accessiblecurrent
slePmHistorySeqId
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.94.4.1.1.1INTEGER (1..65535)read-onlycurrent
slePmHistoryClassId
OBJECT-TYPE
History Class ID.
1.3.6.1.4.1.6296.101.94.4.1.1.2PmClassIdread-onlycurrent
slePmHistoryPmId
OBJECT-TYPE
History PM Id
1.3.6.1.4.1.6296.101.94.4.1.1.3PmIdread-onlycurrent
slePmHistoryPmSource
OBJECT-TYPE
|type|length|value|type|length|value|.... type (1-byte) : PM location type length(1-byte) : PM location value length value (length-bytes) : PM location value
1.3.6.1.4.1.6296.101.94.4.1.1.4PmSrcread-onlycurrent
slePmHistoryTerm
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.94.4.1.1.5INTEGER {min15(1), day1(2)}read-onlycurrent
slePmHistoryIndex
OBJECT-TYPE
History Index: 15min : 1 ~ 96, 1-day : 1 ~ 7
1.3.6.1.4.1.6296.101.94.4.1.1.6INTEGER (1..31)read-onlycurrent
slePmHistoryPmCount
OBJECT-TYPE
History Performance count
1.3.6.1.4.1.6296.101.94.4.1.1.7Counter64read-onlycurrent
slePmHistoryAccCount
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.94.4.1.1.8Counter32read-writecurrent
slePmHistoryStartTime
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.94.4.1.1.9TimeTicksread-onlycurrent
slePmHistoryControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.94.4.2
slePmHistoryControlRequest
OBJECT-TYPE
The configuration commands, and user can configure functions via setting this entry as proper value. clearPmHistory : clears all the PM History Table
1.3.6.1.4.1.6296.101.94.4.2.1INTEGER {clearPmHistory(1)}read-writecurrent
slePmHistoryControlStatus
OBJECT-TYPE
status of user command. User have to check this value as .busy. or .idle. before do setRequest.
1.3.6.1.4.1.6296.101.94.4.2.2SleControlStatusTyperead-onlycurrent
slePmHistoryControlTimer
OBJECT-TYPE
the wait-time until setRequest end. In case of short-time command, this value is 0
1.3.6.1.4.1.6296.101.94.4.2.3Gauge32read-writecurrent
slePmHistoryControlTimeStamp
OBJECT-TYPE
the time stamp of the last command. (don.t care)
1.3.6.1.4.1.6296.101.94.4.2.4TimeTicksread-onlycurrent
slePmHistoryControlReqResult
OBJECT-TYPE
Result of the last command.
1.3.6.1.4.1.6296.101.94.4.2.5SleControlRequestResultTyperead-onlycurrent
slePmHistoryNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.94.4.3

Notifications

NameOIDStatus
slePmConfigTcaEnableChanged
NOTIFICATION-TYPE
Notification for Tca Enable change
1.3.6.1.4.1.6296.101.94.2.3.1current
slePmConfigTh15MinChanged
NOTIFICATION-TYPE
Notification for 15minute theshold change
1.3.6.1.4.1.6296.101.94.2.3.2current
slePmConfigTh1DayChanged
NOTIFICATION-TYPE
Notification for 1day theshold change
1.3.6.1.4.1.6296.101.94.2.3.3current
slePmCurrentPmCleared
NOTIFICATION-TYPE
Notification for current PM clear
1.3.6.1.4.1.6296.101.94.3.3.1current
slePmHistoryPmCleared
NOTIFICATION-TYPE
Notification for PM History cleared
1.3.6.1.4.1.6296.101.94.4.3.1current