MIBs Depot

SLE-ISIS-MIB

Registered at
1.3.6.1.4.1.6296.101.56
Last updated
2016-03-16 14:55
Organization
HANASOFT
Revisions
1970-01-01 00:00
Namespace
dasan
Source file
SLE-ISIS-MIB
Digest
sha256:18b5baeedc4fe0b7550add227b65b5412bde887c38310985fe56b78e1feea6c1

Description

This MIB contains information about RIP version 2.

Imports

FromSymbols
DASAN-SMIsleMgmt
SLE-TC-MIBSleControlRequestResultType, SleControlStatusType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIGauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DASAN-SMI
SLE-ISIS-MIB
SLE-TC-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
sleISISBase
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.1
sleISISBaseInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.1.1
sleISISRestartSuppressAdjacency
OBJECT-TYPE
ISIS restart suppress-adjacency
1.3.6.1.4.1.6296.101.56.1.1.1INTEGER {disable(0), enable(1)}read-writecurrent
sleISISRestartHelper
OBJECT-TYPE
ISIS restart helper
1.3.6.1.4.1.6296.101.56.1.1.2INTEGER {disable(0), enable(1)}read-writecurrent
sleISISRestartGracePeriod
OBJECT-TYPE
ISIS Graceful-restart period. Seconds: <1-65535> Specify the number of seconds in the grace period.
1.3.6.1.4.1.6296.101.56.1.1.3INTEGER (0..65535)read-onlycurrent
sleISISBaseControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.1.2
sleISISControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.101.56.1.2.1INTEGER {setISISRestartSuppressAdj(1), setISISRestartHelper(2), setISISRestartGracefulPeriod(3), clearISISClnsNeighbors(4), clearISISClnsIsNeighbors(5), clearISISCounter(6), clearISISInterfaceCounter(7), clearISISProcess(8), clearISISRoute(9), retartISISGraceful(10), snmpRestartISIS(11)}read-writecurrent
sleISISControlStatus
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.101.56.1.2.2SleControlStatusTyperead-onlycurrent
sleISISControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.101.56.1.2.3Gauge32read-writecurrent
sleISISControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.101.56.1.2.4TimeTicksread-onlycurrent
sleISISControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.101.56.1.2.5SleControlRequestResultTyperead-onlycurrent
sleISISControlRestartSuppressAdjacency
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.1.2.6INTEGER {diable(0), enable(1)}read-writecurrent
sleISISControlRestartHelper
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.1.2.7INTEGER {disable(0), enable(1)}read-writecurrent
sleISISControlRestartPeriod
OBJECT-TYPE
ISIS Graceful-restart period.
1.3.6.1.4.1.6296.101.56.1.2.8Integer32 (0..1800)read-writecurrent
sleISISControlClearSystemId
OBJECT-TYPE
System-ID Neighbor system ID in XXXX. XXXX. XXXX format.
1.3.6.1.4.1.6296.101.56.1.2.9OCTET STRING (SIZE(0..512))read-writecurrent
sleISISControlClearIfName
OBJECT-TYPE
Interface Name of ISIS for clear
1.3.6.1.4.1.6296.101.56.1.2.10OCTET STRING (SIZE(0..512))read-writecurrent
sleISISControlClearRouteTag
OBJECT-TYPE
Routing area tag
1.3.6.1.4.1.6296.101.56.1.2.11OCTET STRING (SIZE(0..512))read-writecurrent
sleISISControlClearRouteMode
OBJECT-TYPE
The route mode to clear. Redistribution: Clear ISIS local redistribution routes. all: Clear all of the ISIS routing table.s
1.3.6.1.4.1.6296.101.56.1.2.12INTEGER {redistribution(1), all(2)}read-writecurrent
sleISISBaseNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.1.3
sleISISProc
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.2
sleISISProcInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.2.1
sleISISProcInfoTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.1.1not-accessiblecurrent
sleISISProcInfoEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.1.1.1not-accessiblecurrent
sleISISProcInfoInstanceID
OBJECT-TYPE
Instance ID of ISIS Process
1.3.6.1.4.1.6296.101.56.2.1.1.1.1Integer32 (0..65535)read-onlycurrent
sleISISProcInfoTag
OBJECT-TYPE
ISIS Process Tag
1.3.6.1.4.1.6296.101.56.2.1.1.1.2OCTET STRINGread-onlycurrent
sleISISProcBfdAllInterface
OBJECT-TYPE
Enable BFD on all interfaces
1.3.6.1.4.1.6296.101.56.2.1.1.1.3INTEGER {disable(0), enable(1)}read-onlycurrent
sleISISProcCapCspf
OBJECT-TYPE
Enable Constrained Shortest Path First
1.3.6.1.4.1.6296.101.56.2.1.1.1.4INTEGER {disable(0), enable(1)}read-onlycurrent
sleISISProcDynHostname
OBJECT-TYPE
Enable dynamic hostname
1.3.6.1.4.1.6296.101.56.2.1.1.1.5INTEGER {disable(0), enable(1)}read-onlycurrent
sleISISProcDynHostnameAreaTag
OBJECT-TYPE
Use area-tag as hostname
1.3.6.1.4.1.6296.101.56.2.1.1.1.6INTEGER {disable(0), enable(1)}read-onlycurrent
sleISISProcIgnLspErr
OBJECT-TYPE
Ignore LSPs with bad checksums
1.3.6.1.4.1.6296.101.56.2.1.1.1.7INTEGER {disable(0), enable(1)}read-onlycurrent
sleISISProcRouteHighPriorityTag
OBJECT-TYPE
Sets the high priority of route
1.3.6.1.4.1.6296.101.56.2.1.1.1.8Gauge32 (1..4294967295)read-onlycurrent
sleISISProcIspfLevel
OBJECT-TYPE
Enable incremental SPF for ISIS proces
1.3.6.1.4.1.6296.101.56.2.1.1.1.9INTEGER {none(0), level1(1), level1To2(2), level2only(3)}read-onlycurrent
sleISISProcIsTypeLevel
OBJECT-TYPE
IS Level for ISIS process
1.3.6.1.4.1.6296.101.56.2.1.1.1.10INTEGER {none(0), level1(1), level1To2(2), level2Only(3)}read-onlycurrent
sleISISProcLspGenInterval
OBJECT-TYPE
Minimum interval between regenerating same LSP
1.3.6.1.4.1.6296.101.56.2.1.1.1.11INTEGER (1..120)read-onlycurrent
sleISISProcLspGenIntervalLevel
OBJECT-TYPE
IS Level for ISIS process
1.3.6.1.4.1.6296.101.56.2.1.1.1.12INTEGER {none(0), level1(1), level2(2)}read-onlycurrent
sleISISProcLspMtu
OBJECT-TYPE
Set lsp MTU in bytes
1.3.6.1.4.1.6296.101.56.2.1.1.1.13INTEGER (512..1492)read-onlycurrent
sleISISProcLspMtuLevel
OBJECT-TYPE
IS Level for ISIS process
1.3.6.1.4.1.6296.101.56.2.1.1.1.14INTEGER {none(0), level1(1), level1To2(2), level2Only(3)}read-onlycurrent
sleISISProcLspRefreshInterval
OBJECT-TYPE
Set LSP refresh interval
1.3.6.1.4.1.6296.101.56.2.1.1.1.15INTEGER (1..65535)read-onlycurrent
sleISISProcMaxAreaAddressNum
OBJECT-TYPE
Configure isis maximum area address
1.3.6.1.4.1.6296.101.56.2.1.1.1.16INTEGER (3..254)read-onlycurrent
sleISISProcMaxLspLifetime
OBJECT-TYPE
Set maximum LSP lifetime
1.3.6.1.4.1.6296.101.56.2.1.1.1.17INTEGER (350..65535)read-onlycurrent
sleISISProcMetricStyle
OBJECT-TYPE
Use old-style (ISO 10589) or new-style packet formats
1.3.6.1.4.1.6296.101.56.2.1.1.1.18INTEGER {none(0), wide(1), wideTransition(2), transition(3), narrowTransition(4)}read-onlycurrent
sleISISProcMetricStyleLevel
OBJECT-TYPE
Level of Metric Style
1.3.6.1.4.1.6296.101.56.2.1.1.1.19INTEGER {none(0), level1(1), level1To2(2), level2Only(3)}read-onlycurrent
sleISISProcMplsTrafficEngLevel
OBJECT-TYPE
Traffice Engine level of MPLS routing protocol
1.3.6.1.4.1.6296.101.56.2.1.1.1.20INTEGER {none(0), level1(1), level2(2)}read-onlycurrent
sleISISProcMplsTrafficEngRouterID
OBJECT-TYPE
Traffice Engine Router ID of MPLS routing protoco
1.3.6.1.4.1.6296.101.56.2.1.1.1.21IpAddressread-onlycurrent
sleISISProcPrcIntervalExpMinDelay
OBJECT-TYPE
Use exponential backoff min delays between PRC calculation
1.3.6.1.4.1.6296.101.56.2.1.1.1.22INTEGER (0..2147483647)read-onlycurrent
sleISISProcPrcIntervalExpMaxDelay
OBJECT-TYPE
Use exponential backoff max delays between PRC calculation
1.3.6.1.4.1.6296.101.56.2.1.1.1.23INTEGER (0..2147483647)read-onlycurrent
sleISISProcProtocolTopolgy
OBJECT-TYPE
Protocol Topology
1.3.6.1.4.1.6296.101.56.2.1.1.1.24INTEGER {disable(0), enable(1)}read-onlycurrent
sleISISProcRestartTimerVal
OBJECT-TYPE
Restart timer interval
1.3.6.1.4.1.6296.101.56.2.1.1.1.25INTEGER (5..65535)read-onlycurrent
sleISISProcRestartTimerLevel
OBJECT-TYPE
Restart timer level
1.3.6.1.4.1.6296.101.56.2.1.1.1.26INTEGER {none(0), level1(1), level1To2(2), level2Only(3)}read-onlycurrent
sleISISProcSpfIntervalExpMin
OBJECT-TYPE
Use exponential backoff min delays between SPF calculations
1.3.6.1.4.1.6296.101.56.2.1.1.1.27INTEGER (0..2147483647)read-onlycurrent
sleISISProcSpfIntervalExpMax
OBJECT-TYPE
Use exponential backoff max delays between SPF calculations
1.3.6.1.4.1.6296.101.56.2.1.1.1.28INTEGER (0..2147483647)read-onlycurrent
sleISISProcSpfIntervalExpLevel
OBJECT-TYPE
Level of SPF Interval Exp
1.3.6.1.4.1.6296.101.56.2.1.1.1.29INTEGER {none(0), level1(1), level2(2)}read-onlycurrent
sleISISProcAuthMode
OBJECT-TYPE
Authentication mode of ISIS Process
1.3.6.1.4.1.6296.101.56.2.1.1.1.30INTEGER {none(0), md5(1), text(2), md5Text(3)}read-onlycurrent
sleISISProcAuthModeLevel
OBJECT-TYPE
Authentication level of ISIS Process
1.3.6.1.4.1.6296.101.56.2.1.1.1.31INTEGER {none(0), level1(1), level2(2)}read-onlycurrent
sleISISProcAuthSendOnly
OBJECT-TYPE
Authentication send-only
1.3.6.1.4.1.6296.101.56.2.1.1.1.32INTEGER {disable(0), enable(1)}read-onlycurrent
sleISISProcAuthSendOnlyLevel
OBJECT-TYPE
Level of Authentication send-only
1.3.6.1.4.1.6296.101.56.2.1.1.1.33INTEGER {none(0), level1(1), level2(2)}read-onlycurrent
sleISISProcDomPassVal
OBJECT-TYPE
ISIS Routing domain password
1.3.6.1.4.1.6296.101.56.2.1.1.1.34OCTET STRING (SIZE(0..512))read-onlycurrent
sleISISProcDomPassAuthSnp
OBJECT-TYPE
SNP Authentication of ISIS Routing domain
1.3.6.1.4.1.6296.101.56.2.1.1.1.35INTEGER {none(0), validate(1), sendOnly(2)}read-onlycurrent
sleISISProcAreaPassVal
OBJECT-TYPE
ISIS Routing Area password
1.3.6.1.4.1.6296.101.56.2.1.1.1.36OCTET STRING (SIZE(0..512))read-onlycurrent
sleISISProcAreaPassAuthSnp
OBJECT-TYPE
SNP Authentication of ISIS Routing Area
1.3.6.1.4.1.6296.101.56.2.1.1.1.37INTEGER {none(0), validate(1), sendOnly(2)}read-onlycurrent
sleISISProcSetOverloadBit
OBJECT-TYPE
Signal other routers not to use us in SPF
1.3.6.1.4.1.6296.101.56.2.1.1.1.38INTEGER {disable(0), enable(1)}read-onlycurrent
sleISISProcSetOverloadBitOnStartup
OBJECT-TYPE
Set overload-bit only temporarily after reboot
1.3.6.1.4.1.6296.101.56.2.1.1.1.39INTEGER {none(0), overload(1), waitForBgp(2)}read-onlycurrent
sleISISProcSetOverloadBitOnStartupInterval
OBJECT-TYPE
Time in seconds to advertise ourself as overloaded after reboot
1.3.6.1.4.1.6296.101.56.2.1.1.1.40Integer32 (5..86400)read-onlycurrent
sleISISProcSetOverloadBitSuppress
OBJECT-TYPE
If overload-bit set, suppress the following types of IP prefixes
1.3.6.1.4.1.6296.101.56.2.1.1.1.41INTEGER {none(0), external(1), interlevel(2)}read-onlycurrent
sleISISProcWaitTimerVal
OBJECT-TYPE
Set lsp MTU in bytes
1.3.6.1.4.1.6296.101.56.2.1.1.1.42INTEGER (1..65535)read-onlycurrent
sleISISProcWaitTimerLevel
OBJECT-TYPE
IS Level for ISIS process
1.3.6.1.4.1.6296.101.56.2.1.1.1.43INTEGER {none(0), level1(1), level1To2(2), level2Only(3)}read-onlycurrent
sleISISProcAuthenKeyChainL1
OBJECT-TYPE
The authentication key-chain with level1
1.3.6.1.4.1.6296.101.56.2.1.1.1.44OCTET STRINGread-onlycurrent
sleISISProcAuthenKeyChainL2
OBJECT-TYPE
The authentication key-chain with level2.
1.3.6.1.4.1.6296.101.56.2.1.1.1.45OCTET STRINGread-onlycurrent
sleISISProcAuthenKeyChainL1L2
OBJECT-TYPE
The authentication key-chain with level1 and level2.
1.3.6.1.4.1.6296.101.56.2.1.1.1.46OCTET STRINGread-onlycurrent
sleISISProcInfoControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.2.1.2
sleISISProcInfoControlRequest
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.1.2.1INTEGER {createISISProcess(1), deleteISISProcess(2), setISISProcBfdAllInterface(3), setISISProcCapabilityCspf(4), setISISProcDynamicHostname(5), setISISProcIgnoreLspErr(6), setISISProcRouteHighPriorityTag(7), setISISProcIspfLevel(8), setISISProcIsTypeLevel(9), setISISProcLspGenInterval(10), setISISProcLspMtu(11), setISISProcLspRefreshInterval(12), setISISProcMaxAreaAddress(13), setISISProcMaxLspLifetime(14), setISISProcMetricStyle(15), setISISProcMplsTrafficEngLevel(16), setISISProcMplsTrafficEngRouterID(17), setISISProcPrcIntervalExp(18), setISISProcProtocoalTopology(19), setISISProcRestartTimer(20), setISISProcSpfIntervalExp(21), setISISProcAuthMode(22), setISISProcAuthSendOnly(23), setISISProcDomPassword(24), setISISProcAreaPassword(25), setISISProcSetOverloadBit(26), setISISProcWaitTimer(27), setISISProcAuthenKeyChain(28), delISISProcAuthenKeyChain(29)}read-writecurrent
sleISISProcInfoControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.1.2.2SleControlStatusTyperead-onlycurrent
sleISISProcInfoControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.1.2.3Gauge32read-writecurrent
sleISISProcInfoControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.1.2.4TimeTicksread-onlycurrent
sleISISProcInfoControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.1.2.5SleControlRequestResultTyperead-onlycurrent
sleISISProcInfoControlTag
OBJECT-TYPE
ISIS Process Tag
1.3.6.1.4.1.6296.101.56.2.1.2.6OCTET STRING (SIZE(0..512))read-writecurrent
sleISISProcInfoControlBfdAllInterface
OBJECT-TYPE
Enable BFD on all interfaces
1.3.6.1.4.1.6296.101.56.2.1.2.7INTEGER {disable(0), enable(1)}read-writecurrent
sleISISProcInfoControlCapCspf
OBJECT-TYPE
Enable Constrained Shortest Path First
1.3.6.1.4.1.6296.101.56.2.1.2.8INTEGER {disable(0), enable(1)}read-writecurrent
sleISISProcInfoControlDynHostname
OBJECT-TYPE
Enable dynamic hostname
1.3.6.1.4.1.6296.101.56.2.1.2.9INTEGER {disable(0), enable(1)}read-writecurrent
sleISISProcInfoControlDynHostnameAreaTag
OBJECT-TYPE
Use area-tag as hostname
1.3.6.1.4.1.6296.101.56.2.1.2.10INTEGER {disable(0), enable(1)}read-writecurrent
sleISISProcInfoControlIgnLspErr
OBJECT-TYPE
Ignore LSPs with bad checksums
1.3.6.1.4.1.6296.101.56.2.1.2.11INTEGER {disable(0), enable(1)}read-writecurrent
sleISISProcInfoControlRouteHighPriorityTag
OBJECT-TYPE
Sets the high priority of route
1.3.6.1.4.1.6296.101.56.2.1.2.12Gauge32 (1..4294967295)read-writecurrent
sleISISProcInfoControlIspfLevel
OBJECT-TYPE
Enable incremental SPF for ISIS proces
1.3.6.1.4.1.6296.101.56.2.1.2.13INTEGER {none(0), level1(1), level1To2(2), level2Only(3)}read-writecurrent
sleISISProcInfoControlIsTypeLevel
OBJECT-TYPE
IS Level for ISISprocess
1.3.6.1.4.1.6296.101.56.2.1.2.14INTEGER {none(0), level1(1), level1To2(2), level2Only(3)}read-writecurrent
sleISISProcInfoControlLspGenInterval
OBJECT-TYPE
Minimum interval between regenerating same LSP
1.3.6.1.4.1.6296.101.56.2.1.2.15INTEGER (1..120)read-writecurrent
sleISISProcInfoControlLspGenIntervalLevel
OBJECT-TYPE
IS Level for ISISprocess
1.3.6.1.4.1.6296.101.56.2.1.2.16INTEGER {none(0), level1(1), level2(2)}read-writecurrent
sleISISProcInfoControlLspMtu
OBJECT-TYPE
Set lsp MTU in bytes
1.3.6.1.4.1.6296.101.56.2.1.2.17INTEGER (512..1492)read-writecurrent
sleISISProcInfoControlLspMtuLevel
OBJECT-TYPE
IS Level for ISISprocess
1.3.6.1.4.1.6296.101.56.2.1.2.18INTEGER {none(0), level1(1), level1To2(2), level2Only(3)}read-writecurrent
sleISISProcInfoControlLspRefreshInterval
OBJECT-TYPE
Set LSP refresh interval
1.3.6.1.4.1.6296.101.56.2.1.2.19INTEGER (1..65535)read-writecurrent
sleISISProcInfoControlMaxAreaAddressNum
OBJECT-TYPE
Configure isis maximum area address
1.3.6.1.4.1.6296.101.56.2.1.2.20INTEGER (3..254)read-writecurrent
sleISISProcInfoControlMaxLspLifetime
OBJECT-TYPE
Set maximum LSP lifetime
1.3.6.1.4.1.6296.101.56.2.1.2.21INTEGER (350..65535)read-writecurrent
sleISISProcInfoControlMetricStyle
OBJECT-TYPE
Use old-style (ISO 10589) or new-style packet formats
1.3.6.1.4.1.6296.101.56.2.1.2.22INTEGER {none(0), wide(1), wideTransition(2), transition(3), narrowTransition(4)}read-writecurrent
sleISISProcInfoControlMetricStyleLevel
OBJECT-TYPE
Level of Metric Style
1.3.6.1.4.1.6296.101.56.2.1.2.23INTEGER {none(0), level1(1), level1To2(2), level2Only(3)}read-writecurrent
sleISISProcInfoControlMplsTrafficEngLevel
OBJECT-TYPE
Traffice Engine level of MPLS routing protocol
1.3.6.1.4.1.6296.101.56.2.1.2.24INTEGER {none(0), level1(1), level2(2)}read-writecurrent
sleISISProcInfoControlMplsTrafficEngRouterID
OBJECT-TYPE
Traffice Engine Router ID of MPLS routing protocol
1.3.6.1.4.1.6296.101.56.2.1.2.25IpAddressread-writecurrent
sleISISProcInfoControlPrcIntervalExpMinDelay
OBJECT-TYPE
Use exponential backoff min delays between PRC calculation
1.3.6.1.4.1.6296.101.56.2.1.2.26INTEGER (0..2147483647)read-writecurrent
sleISISProcInfoControlPrcIntervalExpMaxDelay
OBJECT-TYPE
Use exponential backoff max delays between PRC calculation
1.3.6.1.4.1.6296.101.56.2.1.2.27INTEGER (0..2147483647)read-writecurrent
sleISISProcInfoControlProtocolTopolgy
OBJECT-TYPE
Protocol Topology
1.3.6.1.4.1.6296.101.56.2.1.2.28INTEGER {disable(0), enable(1)}read-writecurrent
sleISISProcInfoControlRestartTimerVal
OBJECT-TYPE
Protocol Topology
1.3.6.1.4.1.6296.101.56.2.1.2.29INTEGER (5..65535)read-writecurrent
sleISISProcInfoControlRestartTimerLevel
OBJECT-TYPE
Restart timer level
1.3.6.1.4.1.6296.101.56.2.1.2.30INTEGER {none(0), level1(1), level1To2(2), level2Only(3)}read-writecurrent
sleISISProcInfoControlSpfIntervalExpMin
OBJECT-TYPE
Use exponential backoff min delays between SPF calculations
1.3.6.1.4.1.6296.101.56.2.1.2.31INTEGER (0..2147483647)read-writecurrent
sleISISProcInfoControlSpfIntervalExpMax
OBJECT-TYPE
Use exponential backoff max delays between SPF calculations
1.3.6.1.4.1.6296.101.56.2.1.2.32INTEGER (0..2147483647)read-writecurrent
sleISISProcInfoControlSpfIntervalExpLevel
OBJECT-TYPE
Level of SPF Interval Exp
1.3.6.1.4.1.6296.101.56.2.1.2.33INTEGER {none(0), level1(1), level2(2)}read-writecurrent
sleISISProcInfoControlAuthMode
OBJECT-TYPE
Authentication mode of ISIS Process
1.3.6.1.4.1.6296.101.56.2.1.2.34INTEGER {none(0), md5(1), text(2), md5Text(3)}read-writecurrent
sleISISProcInfoControlAuthModeLevel
OBJECT-TYPE
Authentication level of ISIS Process
1.3.6.1.4.1.6296.101.56.2.1.2.35INTEGER {none(0), level1(1), level2(2)}read-writecurrent
sleISISProcInfoControlAuthSendOnly
OBJECT-TYPE
Authentication send-only
1.3.6.1.4.1.6296.101.56.2.1.2.36INTEGER {disable(0), enable(1)}read-writecurrent
sleISISProcInfoControlAuthSendOnlyLevel
OBJECT-TYPE
Level of Authentication send-only
1.3.6.1.4.1.6296.101.56.2.1.2.37INTEGER {none(0), level1(1), level2(2)}read-writecurrent
sleISISProcInfoControlDomPassVal
OBJECT-TYPE
ISIS Routing domain password
1.3.6.1.4.1.6296.101.56.2.1.2.38OCTET STRINGread-writecurrent
sleISISProcInfoControlDomPassAuthSnp
OBJECT-TYPE
SNP Authentication of ISIS Routing domain
1.3.6.1.4.1.6296.101.56.2.1.2.39INTEGER {none(0), validate(1), sendOnly(2)}read-writecurrent
sleISISProcInfoControlAreaPassVal
OBJECT-TYPE
ISIS Routing Area password
1.3.6.1.4.1.6296.101.56.2.1.2.40OCTET STRINGread-writecurrent
sleISISProcInfoControlAreaPassAuthSnp
OBJECT-TYPE
SNP Authentication of ISIS Routing domain
1.3.6.1.4.1.6296.101.56.2.1.2.41INTEGER {none(0), validate(1), sendOnly(2)}read-writecurrent
sleISISProcInfoControlSetOverloadBit
OBJECT-TYPE
Signal other routers not to use us in SPF
1.3.6.1.4.1.6296.101.56.2.1.2.42INTEGER {disable(0), enable(1)}read-writecurrent
sleISISProcInfoControlSetOverloadBitOnStartup
OBJECT-TYPE
Set overload-bit only temporarily after reboot
1.3.6.1.4.1.6296.101.56.2.1.2.43INTEGER {disable(0), overload(1), waitForBgp(2)}read-writecurrent
sleISISProcInfoControlSetOverloadBitOnStartupInterval
OBJECT-TYPE
Time in seconds to advertise ourself as overloaded after reboot
1.3.6.1.4.1.6296.101.56.2.1.2.44INTEGER (5..86400)read-writecurrent
sleISISProcInfoControlSetOverloadBitSuppress
OBJECT-TYPE
If overload-bit set, suppress the following types of IP prefixes
1.3.6.1.4.1.6296.101.56.2.1.2.45INTEGER {none(0), external(1), interlevel(2)}read-writecurrent
sleISISProcControlWaitTimerVal
OBJECT-TYPE
Set lsp MTU in bytes
1.3.6.1.4.1.6296.101.56.2.1.2.46INTEGER (1..65535)read-writecurrent
sleISISProcControlWaitTimerLevel
OBJECT-TYPE
Enable incremental SPF for ISIS proces
1.3.6.1.4.1.6296.101.56.2.1.2.47INTEGER {none(0), level1(1), level1To2(2), level2Only(3)}read-writecurrent
sleISISProcControlAuthenkeyChain
OBJECT-TYPE
The authentication key-chain word.
1.3.6.1.4.1.6296.101.56.2.1.2.48OCTET STRINGread-writecurrent
sleISISProcControlAuthenkeyChainLevel
OBJECT-TYPE
The authentication key-chain level.
1.3.6.1.4.1.6296.101.56.2.1.2.49INTEGER {level1(1), level2(2), level1And2(3)}read-writecurrent
sleISISProcInfoNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.2.1.3
sleISISProcNet
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.2.2
sleISISProcNetTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.2.1not-accessiblecurrent
sleISISProcNetEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.2.1.1not-accessiblecurrent
sleISISProcNetInstanceID
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.2.1.1.1Integer32 (0..65535)read-onlycurrent
sleISISProcNetTitle
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.2.1.1.2OCTET STRINGread-onlycurrent
sleISISProcNetControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.2.2.2
sleISISProcNetControlRequest
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.2.2.1INTEGER {createISISProcNet(1), deleteISISProcNet(2)}read-writecurrent
sleISISProcNetControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.2.2.2SleControlStatusTyperead-onlycurrent
sleISISProcNetControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.2.2.3Gauge32read-writecurrent
sleISISProcNetControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.2.2.4TimeTicksread-onlycurrent
sleISISProcNetControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.2.2.5SleControlRequestResultTyperead-onlycurrent
sleISISProcNetControlInstanceID
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.2.2.6Integer32 (0..65535)read-writecurrent
sleISISProcNetControlTitle
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.2.2.7OCTET STRING (SIZE(0..512))read-writecurrent
sleISISProcNetNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.2.2.3
sleISISProcDistanceV4
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.2.3
sleISISProcDistanceV4Table
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.3.1not-accessiblecurrent
sleISISProcDistanceV4Entry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.3.1.1not-accessiblecurrent
sleISISProcDistanceV4InstanceID
OBJECT-TYPE
ISIS Instance ID
1.3.6.1.4.1.6296.101.56.2.3.1.1.1Integer32 (1..65535)read-onlycurrent
sleISISProcDistanceV4Dist
OBJECT-TYPE
ISIS Administrative Distance range
1.3.6.1.4.1.6296.101.56.2.3.1.1.2Integer32 (1..255)read-onlycurrent
sleISISProcDistanceV4SytemID
OBJECT-TYPE
Source ID in XXXX.XXXX.XXXX format.
1.3.6.1.4.1.6296.101.56.2.3.1.1.3OCTET STRING (SIZE(0..112))read-onlycurrent
sleISISProcDistanceV4AccessList
OBJECT-TYPE
Access-list name.
1.3.6.1.4.1.6296.101.56.2.3.1.1.4OCTET STRINGread-onlycurrent
sleISISProcDistanceV4Control
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.2.3.2
sleISISProcDistanceV4ControlRequest
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.3.2.1INTEGER {createRIPNetworkIfname(1), deleteRIPNetworkIfname(2)}read-writecurrent
sleISISProcDistanceV4ControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.3.2.2SleControlStatusTyperead-onlycurrent
sleISISProcDistanceV4ControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.3.2.3Gauge32read-writecurrent
sleISISProcDistanceV4TimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.3.2.4TimeTicksread-onlycurrent
sleISISProcDistanceV4ntrolReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.2.3.2.5SleControlRequestResultTyperead-onlycurrent
sleISISProcDistanceV4ControlInstanceID
OBJECT-TYPE
Set the ISIS Instance ID
1.3.6.1.4.1.6296.101.56.2.3.2.6Integer32 (0..65535)read-onlycurrent
sleISISProcDistanceV4ControlDist
OBJECT-TYPE
ISIS Administrative Distance range
1.3.6.1.4.1.6296.101.56.2.3.2.7Integer32 (0..255)read-onlycurrent
sleISISProcDistanceV4ControlSytemID
OBJECT-TYPE
Source ID in XXXX.XXXX.XXXX format.
1.3.6.1.4.1.6296.101.56.2.3.2.8OCTET STRINGread-onlycurrent
sleISISProcDistanceV4ControlAccessList
OBJECT-TYPE
Access-list name.
1.3.6.1.4.1.6296.101.56.2.3.2.9OCTET STRINGread-onlycurrent
sleISISProcDistanceV4Notification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.2.3.3
sleISISIf
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.3
slsISISIfTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.3.1not-accessiblecurrent
slsISISIfEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.3.1.1not-accessiblecurrent
sleISISIfIndex
OBJECT-TYPE
vlan interface index for isis protocol.
1.3.6.1.4.1.6296.101.56.3.1.1.1Integer32 (1..65535)read-onlycurrent
sleISISIfMplsLdpIgpSync
OBJECT-TYPE
Use this command to enable LDP-ISIS synchronization. 0 : diaable 1 : level-1 2 : level-1-2,(default) 3 : level-2
1.3.6.1.4.1.6296.101.56.3.1.1.2INTEGER {diaable(0), level1(1), level1To2(2), level2(3)}read-onlycurrent
sleISISIfIpRouter
OBJECT-TYPE
Use this command to enable ISIS IPv4 routing on the interface. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.1.1.3INTEGER {disable(0), enable(1)}read-onlycurrent
sleISISIfAuthSendLevel1
OBJECT-TYPE
Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.1.1.4INTEGER {disable(0), enable(1)}read-onlycurrent
sleISISIfAuthSendLevel2
OBJECT-TYPE
Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.1.1.5INTEGER {disable(0), enable(1)}read-onlycurrent
sleISISIfAuthModeMd5Levle1
OBJECT-TYPE
Use this command to set the MD5 authentication mode. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.1.1.6INTEGER {disable(0), enable(1)}read-onlycurrent
sleISISIfAuthModeMd5Levle2
OBJECT-TYPE
Use this command to set the MD5 authentication mode. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.1.1.7INTEGER {disable(0), enable(1)}read-onlycurrent
sleISISIfAuthModeTextLevle1
OBJECT-TYPE
Use this command to set the MD5 authentication mode. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.1.1.8INTEGER {disable(0), enable(1)}read-onlycurrent
sleISISIfAuthModeTextLevle2
OBJECT-TYPE
Use this command to set the MD5 authentication mode. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.1.1.9INTEGER {disable(0), enable(1)}read-onlycurrent
sleISISIfAuthKeyChainLevle1
OBJECT-TYPE
Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null string
1.3.6.1.4.1.6296.101.56.3.1.1.10OCTET STRINGread-onlycurrent
sleISISIfAuthKeyChainLevle2
OBJECT-TYPE
Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null string
1.3.6.1.4.1.6296.101.56.3.1.1.11OCTET STRINGread-onlycurrent
sleISISIfBfd
OBJECT-TYPE
Use this command to enable/disable the BFD check on interface. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.1.1.12INTEGER {disable(0), enable(1)}read-onlycurrent
sleISISIfBfdDisable
OBJECT-TYPE
Use this command to enable/disable the BFD check on interface. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.1.1.13INTEGER {disable(0), enable(1)}read-onlycurrent
sleISISIfCircuitType
OBJECT-TYPE
Use this command to set the circuit type for the interface. 1 : level-1 2 : level-1-2,(default) 3 : level-2
1.3.6.1.4.1.6296.101.56.3.1.1.14INTEGER {level1(1), level1To2(2), level2(3)}read-onlycurrent
sleISISIfCsnpIntervalLevel1
OBJECT-TYPE
Use this command to set CSNP (Complete sequence number PDU) interval in seconds. range : 1 - 65535 default : 10
1.3.6.1.4.1.6296.101.56.3.1.1.15Integer32 (1..65535)read-onlycurrent
sleISISIfCsnpIntervalLevel2
OBJECT-TYPE
Use this command to set CSNP (Complete sequence number PDU) interval in seconds. range : 1 - 65535 default : 10
1.3.6.1.4.1.6296.101.56.3.1.1.16Integer32 (1..65535)read-onlycurrent
sleISISIfHelloPadding
OBJECT-TYPE
Use this command to configure the padding of the ISIS Hello packet. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.1.1.17INTEGER {disable(0), enable(1)}read-onlycurrent
sleISISIfHelloIntervalLevel1
OBJECT-TYPE
Use this command to set the Hello interval in seconds. range : 1 - 65535 default : 10
1.3.6.1.4.1.6296.101.56.3.1.1.18Integer32 (1..65535)read-onlycurrent
sleISISIfHelloIntervalLevel2
OBJECT-TYPE
Use this command to set the Hello interval in seconds. range : 1 - 65535 default : 10
1.3.6.1.4.1.6296.101.56.3.1.1.19Integer32 (1..65535)read-onlycurrent
sleISISIfHelloIntervalMinimalLevel1
OBJECT-TYPE
Use this command to set the Hello interval in seconds. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.1.1.20INTEGER {disable(0), enable(1)}read-onlycurrent
sleISISIfHelloIntervalMinimalLevel2
OBJECT-TYPE
Use this command to set the Hello interval in seconds. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.1.1.21INTEGER {disable(0), enable(1)}read-onlycurrent
sleISISIfHelloMultiplierLevel1
OBJECT-TYPE
Use this command to set multiplier for Hello holding time. range : 2 - 10 default : 3
1.3.6.1.4.1.6296.101.56.3.1.1.22Integer32 (2..10)read-onlycurrent
sleISISIfHelloMultiplierLevel2
OBJECT-TYPE
Use this command to set multiplier for Hello holding time. range : 2 - 10 default : 3
1.3.6.1.4.1.6296.101.56.3.1.1.23Integer32 (2..10)read-onlycurrent
sleISISIfLspInterval
OBJECT-TYPE
Use this command to set the Link State Packet (LSP) transmission interval. range : 1 - 4294967295 default : 33
1.3.6.1.4.1.6296.101.56.3.1.1.24Unsigned32 (1..4294967295)read-onlycurrent
sleISISIfMeshGroup
OBJECT-TYPE
Use this command to set Mesh Group ID on the current interface. range : 1 - 4294967295 disable : 0
1.3.6.1.4.1.6296.101.56.3.1.1.25Unsigned32 (1..4294967295)read-onlycurrent
sleISISIfMetricLevel1
OBJECT-TYPE
Use this command to set default metric for the interface. range : 1 - 63 default : 10
1.3.6.1.4.1.6296.101.56.3.1.1.26Integer32 (1..63)read-onlycurrent
sleISISIfMetricLevel2
OBJECT-TYPE
Use this command to set default metric for the interface. range : 1 - 63 default : 10
1.3.6.1.4.1.6296.101.56.3.1.1.27Integer32 (1..63)read-onlycurrent
sleISISIfNetwork
OBJECT-TYPE
Use this command to change a broadcast interface network type to a point-to-point network type. 0 : disable 1 : broadcast 2 : point-to-point
1.3.6.1.4.1.6296.101.56.3.1.1.28INTEGER {disable(0), broadcast(1), pointToPoint(2)}read-onlycurrent
sleISISIfPriorityLevel1
OBJECT-TYPE
Use this command to set the priority for LAN DIS election. range : 0 - 127 default : 64
1.3.6.1.4.1.6296.101.56.3.1.1.29Integer32 (0..127)read-onlycurrent
sleISISIfPriorityLevel2
OBJECT-TYPE
Use this command to set the priority for LAN DIS election. range : 0 - 127 default : 64
1.3.6.1.4.1.6296.101.56.3.1.1.30Integer32 (0..127)read-onlycurrent
sleISISIfRestartHelloIntervalLevel1
OBJECT-TYPE
Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV. range : 1 - 65535 default : 3
1.3.6.1.4.1.6296.101.56.3.1.1.31Integer32 (1..65535)read-onlycurrent
sleISISIfRestartHelloIntervalLevel2
OBJECT-TYPE
Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV. range : 1 - 65535 default : 3
1.3.6.1.4.1.6296.101.56.3.1.1.32Integer32 (1..65535)read-onlycurrent
sleISISIfRetransmitInterval
OBJECT-TYPE
Use this command to set LSP retransmission interval. range : 0 - 65535 default : 5
1.3.6.1.4.1.6296.101.56.3.1.1.33Integer32 (0..65535)read-onlycurrent
sleISISIfWideMetricLevel1
OBJECT-TYPE
Use this command to set wide metric for the interface. range : 1 - 16777214 default : 10
1.3.6.1.4.1.6296.101.56.3.1.1.34Integer32 (1..16777214)read-onlycurrent
sleISISIfWideMetricLevel2
OBJECT-TYPE
Use this command to set wide metric for the interface. range : 1 - 16777214 default : 10
1.3.6.1.4.1.6296.101.56.3.1.1.35Integer32 (1..16777214)read-writecurrent
sleISISIfControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.3.2
sleISISIfControlRequest
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.3.2.1SleControlRequestResultType {setISISIfProfile(1)}read-writecurrent
sleISISIfControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.3.2.2SleControlStatusTyperead-writecurrent
sleISISIfControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.3.2.3Gauge32read-writecurrent
sleISISIfControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.3.2.4TimeTicksread-writecurrent
sleISISIfControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.3.2.5SleControlRequestResultTyperead-writecurrent
sleISISIfControlIndex
OBJECT-TYPE
vlan interface index for isis protocol.
1.3.6.1.4.1.6296.101.56.3.2.6Integer32read-writecurrent
sleISISIfControlMplsLdpIgpSync
OBJECT-TYPE
Use this command to enable LDP-ISIS synchronization. 0 : diaable 1 : level-1 2 : level-1-2,(default) 3 : level-2
1.3.6.1.4.1.6296.101.56.3.2.7INTEGER {disable(0), level1(1), level1To2(2), level2(3)}read-writecurrent
sleISISIfControlIpRouter
OBJECT-TYPE
Use this command to enable ISIS IPv4 routing on the interface. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.2.8INTEGER {dissable(0), enable(1)}read-writecurrent
sleISISIfControlAuthSendLevel1
OBJECT-TYPE
Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.2.9INTEGER {disable(0), enable(1)}read-writecurrent
sleISISIfControlAuthSendLevel2
OBJECT-TYPE
Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.2.10INTEGER {disable(0), enable(1)}read-writecurrent
sleISISIfControlAuthModeMd5Levle1
OBJECT-TYPE
Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.2.11INTEGER {disable(0), enable(1)}read-writecurrent
sleISISIfControlAuthModeMd5Levle2
OBJECT-TYPE
Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.2.12INTEGER {disable(0), enable(1)}read-writecurrent
sleISISIfControlAuthModeTextLevle1
OBJECT-TYPE
Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.2.13INTEGER {disable(0), enable(1)}read-writecurrent
sleISISIfControlAuthModeTextLevle2
OBJECT-TYPE
Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.2.14INTEGER {disable(0), enable(1)}read-writecurrent
sleISISIfControlAuthKeyChainLevle1
OBJECT-TYPE
Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null string
1.3.6.1.4.1.6296.101.56.3.2.15OCTET STRINGread-writecurrent
sleISISIfControlAuthKeyChainLevle2
OBJECT-TYPE
Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null string
1.3.6.1.4.1.6296.101.56.3.2.16OCTET STRINGread-writecurrent
sleISISIfControlBfd
OBJECT-TYPE
Use this command to enable/disable the BFD check on interface. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.2.17INTEGER {disable(0), enable(1)}read-writecurrent
sleISISIfControlBfdDisable
OBJECT-TYPE
Use this command to enable/disable the BFD check on interface. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.2.18INTEGER {disable(0), enable(1)}read-writecurrent
sleISISIfControlCircuitType
OBJECT-TYPE
Use this command to set the circuit type for the interface. 1 : level-1 2 : level-1-2,(default) 3 : level-2
1.3.6.1.4.1.6296.101.56.3.2.19INTEGER {disable(0), level1(1), level1To2(2), level2(3)}read-writecurrent
sleISISIfControlCsnpIntervalLevel1
OBJECT-TYPE
Use this command to set CSNP (Complete sequence number PDU) interval in seconds. range : 1 ? 65535 default : 10
1.3.6.1.4.1.6296.101.56.3.2.20Integer32 (1..65535)read-writecurrent
sleISISIfControlCsnpIntervalLevel2
OBJECT-TYPE
Use this command to set CSNP (Complete sequence number PDU) interval in seconds. range : 1 ? 65535 default : 10
1.3.6.1.4.1.6296.101.56.3.2.21Integer32 (1..65535)read-writecurrent
sleISISIfControlHelloPadding
OBJECT-TYPE
Use this command to configure the padding of the ISIS Hello packet. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.2.22INTEGER {disable(0), enable(1)}read-writecurrent
sleISISIfControlHelloIntervalLevel1
OBJECT-TYPE
Use this command to set the Hello interval in seconds. range : 1 ? 65535 default : 10
1.3.6.1.4.1.6296.101.56.3.2.23Integer32 (1..65535)read-writecurrent
sleISISIfControlHelloIntervalLevel2
OBJECT-TYPE
Use this command to set the Hello interval in seconds. range : 1 ? 65535 default : 10
1.3.6.1.4.1.6296.101.56.3.2.24Integer32 (1..65535)read-writecurrent
sleISISIfControlHelloIntervalMinimalLevel1
OBJECT-TYPE
Use this command to set the Hello interval in seconds. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.2.25INTEGER {disable(0), enable(1)}read-writecurrent
sleISISIfControlHelloIntervalMinimalLevel2
OBJECT-TYPE
Use this command to set the Hello interval in seconds. 1 : enable 0 : disable
1.3.6.1.4.1.6296.101.56.3.2.26INTEGER {disable(0), enable(1)}read-writecurrent
sleISISIfControlHelloMultiplierLevel1
OBJECT-TYPE
Use this command to set multiplier for Hello holding time. range : 2 ? 10 default : 3
1.3.6.1.4.1.6296.101.56.3.2.27Integer32 (2..10)read-writecurrent
sleISISIfControlHelloMultiplierLevel2
OBJECT-TYPE
Use this command to set multiplier for Hello holding time. range : 2 ? 10 default : 3
1.3.6.1.4.1.6296.101.56.3.2.28Integer32 (2..10)read-writecurrent
sleISISIfControlLspInterval
OBJECT-TYPE
Use this command to set the Link State Packet (LSP) transmission interval. range : 1 ? 4294967295 default : 33
1.3.6.1.4.1.6296.101.56.3.2.29Unsigned32 (2..4294967295)read-writecurrent
sleISISIfControlMeshGroup
OBJECT-TYPE
Use this command to set Mesh Group ID on the current interface. range : 1 ? 4294967295 disable : 0
1.3.6.1.4.1.6296.101.56.3.2.30Unsigned32 (0 | 1..4294967295)read-writecurrent
sleISISIfControlMetricLevel1
OBJECT-TYPE
Use this command to set default metric for the interface. range : 1 ? 63 default : 10
1.3.6.1.4.1.6296.101.56.3.2.31Integer32 (1..63)read-writecurrent
sleISISIfControlMetricLevel2
OBJECT-TYPE
Use this command to set default metric for the interface. range : 1 ? 63 default : 10
1.3.6.1.4.1.6296.101.56.3.2.32Integer32 (1..63)read-writecurrent
sleISISIfControlNetwork
OBJECT-TYPE
Use this command to change a broadcast interface network type to a point-to-point network type. 0 : disable 1 : broadcast 2 : point-to-point
1.3.6.1.4.1.6296.101.56.3.2.33INTEGER {disable(0), broadcast(1), pointToPoint(2)}read-writecurrent
sleISISIfControlPriorityLevel1
OBJECT-TYPE
Use this command to set the priority for LAN DIS election. range : 0 ? 127 default : 64
1.3.6.1.4.1.6296.101.56.3.2.34Integer32 (0..127)read-writecurrent
sleISISIfControlPriorityLevel2
OBJECT-TYPE
Use this command to set the priority for LAN DIS election. range : 0 ? 127 default : 64
1.3.6.1.4.1.6296.101.56.3.2.35Integer32 (0..127)read-writecurrent
sleISISIfControlRestartHelloIntervalLevel1
OBJECT-TYPE
Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV. range : 1 ? 65535 default : 3
1.3.6.1.4.1.6296.101.56.3.2.36Integer32 (1..65535)read-writecurrent
sleISISIfControlRestartHelloIntervalLevel2
OBJECT-TYPE
Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV. range : 1 ? 65535 default : 3
1.3.6.1.4.1.6296.101.56.3.2.37Integer32 (1..65535)read-writecurrent
sleISISIfControlRetransmitInterval
OBJECT-TYPE
Use this command to set LSP retransmission interval. range : 0 ? 65535 default : 5
1.3.6.1.4.1.6296.101.56.3.2.38Integer32 (0..65535)read-writecurrent
sleISISIfControlWideMetricLevel1
OBJECT-TYPE
Use this command to set wide metric for the interface. range : 1 - 16777214 default : 10
1.3.6.1.4.1.6296.101.56.3.2.39Integer32 (1..16777214)read-writecurrent
sleISISIfControlWideMetricLevel2
OBJECT-TYPE
Use this command to set wide metric for the interface. range : 1 - 16777214 default : 10
1.3.6.1.4.1.6296.101.56.3.2.40Integer32 (1..16777214)read-writecurrent
slsISISNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.3.3
sleISISIfStatusTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.3.4not-accessiblecurrent
sleISISIfStatusEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.3.4.1not-accessiblecurrent
sleISISIfStatusIfIndex
OBJECT-TYPE
vlan interface index for isis protocol.
1.3.6.1.4.1.6296.101.56.3.4.1.1Integer32 (1..65535)read-onlycurrent
sleIsisIfStatusIfStatus
OBJECT-TYPE
The interface up/down status
1.3.6.1.4.1.6296.101.56.3.4.1.2INTEGER {down(0), up(1)}read-onlycurrent
sleIsisIfStatusIsisTag
OBJECT-TYPE
The ISIS tag
1.3.6.1.4.1.6296.101.56.3.4.1.3OCTET STRINGread-onlycurrent
sleIsisIfStatusNetworkType
OBJECT-TYPE
The network type
1.3.6.1.4.1.6296.101.56.3.4.1.4INTEGER {unknown(0), broadcast(1), point2Point(2), loopback(3)}read-onlycurrent
sleIsisIfStatusCircuitType
OBJECT-TYPE
The circuit type
1.3.6.1.4.1.6296.101.56.3.4.1.5INTEGER {unknown(0), level1(1), level2(2), level1And2(3)}read-onlycurrent
sleIsisIfStatusLocalCircuitId
OBJECT-TYPE
The local circuit id
1.3.6.1.4.1.6296.101.56.3.4.1.6Integer32read-onlycurrent
sleIsisIfStatusExtendedLocalCircuitId
OBJECT-TYPE
The extended local circuit id
1.3.6.1.4.1.6296.101.56.3.4.1.7Integer32read-onlycurrent
sleIsisIfStatusLocalSnpa
OBJECT-TYPE
The local SNPA mac address
1.3.6.1.4.1.6296.101.56.3.4.1.8OCTET STRINGread-onlycurrent
sleIsisIfStatusLdpSyncHoldTimer
OBJECT-TYPE
The LDP sync hold timer(sec)
1.3.6.1.4.1.6296.101.56.3.4.1.9Integer32read-onlycurrent
sleIsisIfStatusLdpSyncRemainingTime
OBJECT-TYPE
The LDP sync remaining time(sec)
1.3.6.1.4.1.6296.101.56.3.4.1.10Integer32read-onlycurrent
sleIsisIfStatusCircuitL1Metric
OBJECT-TYPE
The narrow metric of level1
1.3.6.1.4.1.6296.101.56.3.4.1.11Integer32read-onlycurrent
sleIsisIfStatusCircuitL1WideMetric
OBJECT-TYPE
The wide metric of level1
1.3.6.1.4.1.6296.101.56.3.4.1.12Integer32read-onlycurrent
sleIsisIfStatusCircuitL1Priority
OBJECT-TYPE
The priority of level1
1.3.6.1.4.1.6296.101.56.3.4.1.13Integer32read-onlycurrent
sleIsisIfStatusCircuitL1CircuitId
OBJECT-TYPE
The circuit id of level1
1.3.6.1.4.1.6296.101.56.3.4.1.14Integer32read-onlycurrent
sleIsisIfStatusCircuitL1ActiveAdjacencies
OBJECT-TYPE
The active adjacencies of level1
1.3.6.1.4.1.6296.101.56.3.4.1.15Integer32read-onlycurrent
sleIsisIfStatusCircuitL1LscpMtu
OBJECT-TYPE
The MTU of level1
1.3.6.1.4.1.6296.101.56.3.4.1.16Integer32read-onlycurrent
sleIsisIfStatusCircuitL2Metric
OBJECT-TYPE
The narrow metric of level2
1.3.6.1.4.1.6296.101.56.3.4.1.17Integer32read-onlycurrent
sleIsisIfStatusCircuitL2WideMetric
OBJECT-TYPE
The wide metric of level2
1.3.6.1.4.1.6296.101.56.3.4.1.18Integer32read-onlycurrent
sleIsisIfStatusCircuitL2Priority
OBJECT-TYPE
The priority of level2
1.3.6.1.4.1.6296.101.56.3.4.1.19Integer32read-onlycurrent
sleIsisIfStatusCircuitL2CircuitId
OBJECT-TYPE
The circuit id of level2
1.3.6.1.4.1.6296.101.56.3.4.1.20Integer32read-onlycurrent
sleIsisIfStatusCircuitL2ActiveAdjacencies
OBJECT-TYPE
The active adjacencies of level2
1.3.6.1.4.1.6296.101.56.3.4.1.21Integer32read-onlycurrent
sleIsisIfStatusCircuitL2LscpMtu
OBJECT-TYPE
The MTU of level2
1.3.6.1.4.1.6296.101.56.3.4.1.22Integer32read-onlycurrent
sleIsisIfStatusL1HelloTimerBroadcast
OBJECT-TYPE
The Level1 hello timer of broadcast
1.3.6.1.4.1.6296.101.56.3.4.1.23OCTET STRINGread-onlycurrent
sleIsisIfStatusL2HelloTimerBroadcast
OBJECT-TYPE
The Level2 hello timer of broadcast
1.3.6.1.4.1.6296.101.56.3.4.1.24OCTET STRINGread-onlycurrent
sleIsisIfStatusL1HellotimerPoint2Point
OBJECT-TYPE
The Level1 hello timer of porint to point
1.3.6.1.4.1.6296.101.56.3.4.1.25OCTET STRINGread-onlycurrent
sleIsisIfStatusL2HellotimerPoint2Point
OBJECT-TYPE
The Level2 hello timer of porint to point
1.3.6.1.4.1.6296.101.56.3.4.1.26OCTET STRINGread-onlycurrent
sleISISInstIf
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.4
sleISISInstIfTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.4.1not-accessiblecurrent
sleISISInstIfEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.4.1.1not-accessiblecurrent
sleISISInstIfInstanceId
OBJECT-TYPE
The ISIS instance index
1.3.6.1.4.1.6296.101.56.4.1.1.1Integer32 (1..65535)read-onlycurrent
sleISISInstIfInterfaceId
OBJECT-TYPE
The ISIS interface index
1.3.6.1.4.1.6296.101.56.4.1.1.2Integer32 (1..65535)read-onlycurrent
sleISISPassiveInterface
OBJECT-TYPE
The passive interface configuration.
1.3.6.1.4.1.6296.101.56.4.1.1.3INTEGER {none(0), enable(1)}read-onlycurrent
sleISISInstIfControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.4.2
sleISISInstIfControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.101.56.4.2.1INTEGER {setISISInstIfPassiveIf(1), delISISInstIfPassiveIf(2)}read-writecurrent
sleISISInstIfControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.4.2.2SleControlStatusTyperead-onlycurrent
sleISISInstIfControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.4.2.3Gauge32read-writecurrent
sleISISInstIfControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.4.2.4TimeTicksread-onlycurrent
sleISISInstIfControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.4.2.5SleControlRequestResultTyperead-onlycurrent
sleISISInstIfControlInstanceId
OBJECT-TYPE
The ISIS instance index
1.3.6.1.4.1.6296.101.56.4.2.6Integer32read-writecurrent
sleISISInstIfControlInterfaceId
OBJECT-TYPE
The ISIS interface index ( 0 means all interface)
1.3.6.1.4.1.6296.101.56.4.2.7Integer32read-writecurrent
sleISISInstRedistribute
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.5
sleISISInstRedistProtocol
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.5.1
sleISISInstRedistProtocolTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.5.1.1not-accessiblecurrent
sleISISInstRedistProtocolEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.5.1.1.1not-accessiblecurrent
sleISISInstRedistProtocolInstanceId
OBJECT-TYPE
The ISIS instance index
1.3.6.1.4.1.6296.101.56.5.1.1.1.1Integer32 (1..65535)read-onlycurrent
sleISISInstRedistProtocolId
OBJECT-TYPE
The ISIS instance index
1.3.6.1.4.1.6296.101.56.5.1.1.1.2INTEGER {kernel(1), connected(2), static(3), rip(4), ospf(5), bgp(6)}read-onlycurrent
sleISISInstRedistProtocolMetric
OBJECT-TYPE
The ISIS interface index
1.3.6.1.4.1.6296.101.56.5.1.1.1.3Gauge32 (0..4261412864)read-onlycurrent
sleISISInstRedistProtocolMetricType
OBJECT-TYPE
The passive interface configuration.
1.3.6.1.4.1.6296.101.56.5.1.1.1.4INTEGER {none(-1), internal(0), external(1)}read-onlycurrent
sleISISInstRedistProtocolRouteLevelType
OBJECT-TYPE
The passive interface configuration.
1.3.6.1.4.1.6296.101.56.5.1.1.1.5INTEGER {none(0), level1(1), level2(2), level1To2(3)}read-onlycurrent
sleISISInstRedistProtocolRouteMapName
OBJECT-TYPE
The passive interface configuration.
1.3.6.1.4.1.6296.101.56.5.1.1.1.6OCTET STRINGread-onlycurrent
sleISISInstRedistProtocolControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.5.1.2
sleISISInstRedistProtocolControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.101.56.5.1.2.1INTEGER {setISISInstIfRedistProtocol(1), delISISInstIfRedistProtocol(2)}read-writecurrent
sleISISInstRedistProtocolControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.5.1.2.2SleControlStatusTyperead-onlycurrent
sleISISInstRedistProtocolControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.5.1.2.3Gauge32read-writecurrent
sleISISInstRedistProtocolControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.5.1.2.4TimeTicksread-onlycurrent
sleISISInstRedistProtocolControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.5.1.2.5SleControlRequestResultTyperead-onlycurrent
sleISISInstRedistProtocolControlInstanceId
OBJECT-TYPE
The ISIS instance index
1.3.6.1.4.1.6296.101.56.5.1.2.6Integer32read-writecurrent
sleISISInstRedistProtocolControlId
OBJECT-TYPE
The ISIS interface index ( 0 means all interface)
1.3.6.1.4.1.6296.101.56.5.1.2.7INTEGER {kernel(1), connected(2), static(3), rip(4), ospf(5), bgp(6)}read-writecurrent
sleISISInstRedistProtocolControlMetric
OBJECT-TYPE
The ISIS interface index ( 0 means all interface)
1.3.6.1.4.1.6296.101.56.5.1.2.8Gauge32 (0..4261412864)read-writecurrent
sleISISInstRedistProtocolControlMetricType
OBJECT-TYPE
The ISIS interface index ( 0 means all interface)
1.3.6.1.4.1.6296.101.56.5.1.2.9INTEGER {none(-1), internal(0), external(1)}read-writecurrent
sleISISInstRedistProtocolControlRouteLevelType
OBJECT-TYPE
The ISIS interface index ( 0 means all interface)
1.3.6.1.4.1.6296.101.56.5.1.2.10INTEGER {none(0), level1(1), level2(2), level1To2(3)}read-writecurrent
sleISISInstRedistProtocolControlRouteMapName
OBJECT-TYPE
The ISIS interface index ( 0 means all interface)
1.3.6.1.4.1.6296.101.56.5.1.2.11OCTET STRINGread-writecurrent
sleISISInstRedistIsisProtocol
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.5.2
sleISISInstRedistIsisProtocolTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.5.2.1not-accessiblecurrent
sleISISInstRedistIsisProtocolEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.5.2.1.1not-accessiblecurrent
sleISISInstRedistIsisProtocolInstanceId
OBJECT-TYPE
The ISIS instance index
1.3.6.1.4.1.6296.101.56.5.2.1.1.1Integer32 (1..65535)read-onlycurrent
sleISISInstRedistIsisProtocolInterAreaFromLv1ToLv2
OBJECT-TYPE
The ISIS instance index
1.3.6.1.4.1.6296.101.56.5.2.1.1.2INTEGER {none(0), enable(1)}read-onlycurrent
sleISISInstRedistIsisProtocolLv1Lv2DistributeList
OBJECT-TYPE
The ISIS interface index
1.3.6.1.4.1.6296.101.56.5.2.1.1.3OCTET STRINGread-onlycurrent
sleISISInstRedistIsisProtocolInterAreaFromLv2ToLv1
OBJECT-TYPE
The passive interface configuration.
1.3.6.1.4.1.6296.101.56.5.2.1.1.4INTEGER {none(0), enable(1)}read-onlycurrent
sleISISInstRedistIsisProtocolLv2Lv1DistributeList
OBJECT-TYPE
The passive interface configuration.
1.3.6.1.4.1.6296.101.56.5.2.1.1.5OCTET STRINGread-onlycurrent
sleISISInstRedistIsisProtocolControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.5.2.2
sleISISInstRedistIsisProtocolControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.101.56.5.2.2.1INTEGER {setISISInstRedistIsisLv1Lv2(1), delISISInstRedistIsisLv1Lv2(2), setISISInstRedistIsisLv2Lv1(3), delISISInstRedistIsisLv2Lv1(4)}read-writecurrent
sleISISInstRedistIsisProtocolControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.5.2.2.2SleControlStatusTyperead-onlycurrent
sleISISInstRedistIsisProtocolControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.5.2.2.3Gauge32read-writecurrent
sleISISInstRedistIsisProtocolControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.5.2.2.4TimeTicksread-onlycurrent
sleISISInstRedistIsisProtocolControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.5.2.2.5SleControlRequestResultTyperead-onlycurrent
sleISISInstRedistIsisProtocolControlInstanceId
OBJECT-TYPE
The ISIS instance index
1.3.6.1.4.1.6296.101.56.5.2.2.6Integer32read-writecurrent
sleISISInstRedistIsisProtocolControlLv1Lv2DistributeList
OBJECT-TYPE
The ISIS interface index ( 0 means all interface)
1.3.6.1.4.1.6296.101.56.5.2.2.7OCTET STRINGread-writecurrent
sleISISInstRedistIsisProtocolControlLv2Lv1DistributeList
OBJECT-TYPE
The ISIS interface index ( 0 means all interface)
1.3.6.1.4.1.6296.101.56.5.2.2.8OCTET STRINGread-writecurrent
sleISISSummanryAddress
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.6
sleISISSummanryAddressTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.6.1not-accessiblecurrent
sleISISSummanryAddressEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.6.1.1not-accessiblecurrent
sleISISSummanryAddressInstanceId
OBJECT-TYPE
The ISIS instance index
1.3.6.1.4.1.6296.101.56.6.1.1.1Integer32 (1..65535)read-onlycurrent
sleISISSummanryAddressIpValue
OBJECT-TYPE
The ISIS interface index
1.3.6.1.4.1.6296.101.56.6.1.1.2IpAddressread-onlycurrent
sleISISSummanryAddressIpNetmask
OBJECT-TYPE
The passive interface configuration.
1.3.6.1.4.1.6296.101.56.6.1.1.3Integer32 (0..32)read-onlycurrent
sleISISSummanryAddressLevel
OBJECT-TYPE
The passive interface configuration.
1.3.6.1.4.1.6296.101.56.6.1.1.4INTEGER {none(0), level1(1), level2(2), level1To2(3)}read-onlycurrent
sleISISSummanryAddressMetric
OBJECT-TYPE
The passive interface configuration.
1.3.6.1.4.1.6296.101.56.6.1.1.5Integer32 (1..63)read-onlycurrent
sleISISSummanryAddressControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.6.2
sleISISSummanryAddressControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.101.56.6.2.1INTEGER {setISISSummaryAddress(1), delISISSummaryAddress(2)}read-writecurrent
sleISISSummanryAddressControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.6.2.2SleControlStatusTyperead-onlycurrent
sleISISSummanryAddressControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.6.2.3Gauge32read-writecurrent
sleISISSummanryAddressControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.6.2.4TimeTicksread-onlycurrent
sleISISSummanryAddressControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.6.2.5SleControlRequestResultTyperead-onlycurrent
sleISISSummanryAddressControlInstanceId
OBJECT-TYPE
The ISIS instance index
1.3.6.1.4.1.6296.101.56.6.2.6Integer32read-writecurrent
sleISISSummanryAddressControlIpValue
OBJECT-TYPE
The ISIS interface index ( 0 means all interface)
1.3.6.1.4.1.6296.101.56.6.2.7IpAddressread-writecurrent
sleISISSummanryAddressControlIpNetmask
OBJECT-TYPE
The ISIS interface index ( 0 means all interface)
1.3.6.1.4.1.6296.101.56.6.2.8Integer32 (0..32)read-writecurrent
sleISISSummanryAddressControlLevel
OBJECT-TYPE
The ISIS interface index ( 0 means all interface)
1.3.6.1.4.1.6296.101.56.6.2.9INTEGER {none(0), level1(1), level2(2), level1To2(3)}read-writecurrent
sleISISSummanryAddressControlMetric
OBJECT-TYPE
The ISIS interface index ( 0 means all interface)
1.3.6.1.4.1.6296.101.56.6.2.10Integer32 (1..63)read-writecurrent
sleISISDatabase
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.7
sleISISDatabaseTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.7.1not-accessiblecurrent
sleISISDatabaseEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.7.1.1not-accessiblecurrent
sleISISDatabaseTag
OBJECT-TYPE
ISIS database tag ID
1.3.6.1.4.1.6296.101.56.7.1.1.1OCTET STRINGread-onlycurrent
sleISISDatabaseLevel
OBJECT-TYPE
ISIS database level index
1.3.6.1.4.1.6296.101.56.7.1.1.2Integer32 (1..2)read-onlycurrent
sleISISDatabaseLspId
OBJECT-TYPE
ISIS database lsp ID
1.3.6.1.4.1.6296.101.56.7.1.1.3OCTET STRINGread-onlycurrent
sleISISDatabaseLspSeqNum
OBJECT-TYPE
ISIS database lsp sequence number
1.3.6.1.4.1.6296.101.56.7.1.1.4OCTET STRINGread-onlycurrent
sleISISDatabaseLspChecksum
OBJECT-TYPE
ISIS database lsp Checksum
1.3.6.1.4.1.6296.101.56.7.1.1.5OCTET STRINGread-onlycurrent
sleISISDatabaseLspHoldtime
OBJECT-TYPE
ISIS database lsp Holdtime
1.3.6.1.4.1.6296.101.56.7.1.1.6OCTET STRINGread-onlycurrent
sleISISDatabaseAtt
OBJECT-TYPE
ISIS database att
1.3.6.1.4.1.6296.101.56.7.1.1.7Integer32read-onlycurrent
sleISISDatabaseP
OBJECT-TYPE
ISIS database partition
1.3.6.1.4.1.6296.101.56.7.1.1.8Integer32read-onlycurrent
sleISISDatabaseOl
OBJECT-TYPE
ISIS database overload
1.3.6.1.4.1.6296.101.56.7.1.1.9Integer32read-onlycurrent
sleISISDatabaseDetail
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.56.8
sleISISDatabaseDetailTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.8.1not-accessiblecurrent
sleISISDatabaseDetailEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.56.8.1.1not-accessiblecurrent
sleISISDatabaseDetailTag
OBJECT-TYPE
ISIS database tag
1.3.6.1.4.1.6296.101.56.8.1.1.1OCTET STRINGread-onlycurrent
sleISISDatabaseDetailLevel
OBJECT-TYPE
ISIS database level
1.3.6.1.4.1.6296.101.56.8.1.1.2INTEGER {null(0), level1(1), level2(2)}read-onlycurrent
sleISISDatabaseDetailLspId
OBJECT-TYPE
ISIS database lsp id
1.3.6.1.4.1.6296.101.56.8.1.1.3OCTET STRINGread-onlycurrent
sleISISDatabaseDetailType
OBJECT-TYPE
ISIS database lsp detail type.
1.3.6.1.4.1.6296.101.56.8.1.1.4INTEGER {areaAddr(1), lspIsNeighbor(2), lspEsNeighbor(3), authInfo(10), extendedIsReachability(22), ipInternalReachability(128), protocolsSupportded(129), ipExternalReachability(130), ipIfAddr(132), ipAuthInfo(133), teRouteId(134), extendedIpReachability(135), hostname(137), sharedRiskLinkGroup(138), multiIsReachability(222), multiTopology(229), ipv6IfAddr(232), multiIpv4Reachability(235), ipv6Reachability(236), multiIpv6Reachability(237)}read-onlycurrent
sleISISDatabaseDetailIndex
OBJECT-TYPE
ISIS database detail index.
1.3.6.1.4.1.6296.101.56.8.1.1.5Integer32 (0..65535)read-onlycurrent
sleISISDatabaseDetailPad
OBJECT-TYPE
ISIS database lsp detail pad.
1.3.6.1.4.1.6296.101.56.8.1.1.6OCTET STRINGread-onlycurrent
sleISISDatabaseDetailValue
OBJECT-TYPE
ISIS database lsp detail vlaue.
1.3.6.1.4.1.6296.101.56.8.1.1.7Integer32read-onlycurrent
sleISISDatabaseDetailDescription
OBJECT-TYPE
ISIS database detail description.
1.3.6.1.4.1.6296.101.56.8.1.1.8OCTET STRINGread-onlycurrent

Conformance

NameOIDStatus
sleISISGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.6296.101.56.9current