SLE-GPON-MIB
- Registered at
- 1.3.6.1.4.1.6296.101.23
- Last updated
- 2006-01-25 17:53
- Organization
- Organization.
- Namespace
- dasan
- Source file
SLE-GPON-MIB- Digest
sha256:7da3167e00fea8661701f9852af9cd237133bef8650f51e56eeb3e3aef4ea553
Description
sle Gpon
Contact
Contact-info.
Imports
| From | Symbols |
|---|---|
| DASAN-SMI | sleMgmt |
| SLE-TC-MIB | SleControlRequestResultType, SleControlStatusType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | BITS, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DASAN-SMI SLE-GPON-MIB SLE-TC-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| EnableFlag TEXTUAL-CONVENTION Description. | current | |||
| InetAddress TEXTUAL-CONVENTION Denotes a generic Internet address. An InetAddress value is always interpreted within the context of an InetAddressType value. Every usage of the InetAddress textual convention is required to specify the InetAddressType object which provides the context. It is suggested that the InetAddressType object is logically registered before the object(s) which use the InetAddress textual convention if they appear in the same logical row. The value of an InetAddress object must always be consistent with the value of the associated InetAddressType object. Attempts to set an InetAddress object to a value which is inconsistent with the associated InetAddressType must fail with an inconsistentValue error. When this textual convention is used as the syntax of an index object, there may be issues with the limit of 128 sub-identifiers specified in SMIv2, STD 58. In this case, the object definition MUST include a 'SIZE' clause to limit the number of potential instance sub-identifiers. | current | |||
| InetAddressPrefixLength TEXTUAL-CONVENTION Denotes the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask which has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0. An InetAddressPrefixLength value is always interpreted within the context of an InetAddressType value. Every usage of the InetAddressPrefixLength textual convention is required to specify the InetAddressType object which provides the context. It is suggested that the InetAddressType object is logically registered before the object(s) which use the InetAddressPrefixLength textual convention if they appear in the same logical row. InetAddressPrefixLength values that are larger than the maximum length of an IP address for a specific InetAddressType are treated as the maximum significant value applicable for the InetAddressType. The maximum significant value is 32 for the InetAddressType 'ipv4(1)' and 'ipv4z(3)' and 128 for the InetAddressType 'ipv6(2)' and 'ipv6z(4)'. The maximum significant value for the InetAddressType 'dns(16)' is 0. The value zero is object-specific and must be defined as part of the description of any object which uses this syntax. Examples of the usage of zero might include situations where the Internet network address prefix is unknown or does not apply. | current | |||
| InetAddressType TEXTUAL-CONVENTION A value that represents a type of Internet address. unknown(0) An unknown address type. This value MUST be used if the value of the corresponding InetAddress object is a zero-length string. It may also be used to indicate an IP address which is not in one of the formats defined below. ipv4(1) An IPv4 address as defined by the InetAddressIPv4 textual convention. ipv6(2) A global IPv6 address as defined by the InetAddressIPv6 textual convention. ipv4z(3) A non-global IPv4 address including a zone index as defined by the InetAddressIPv4z textual convention. ipv6z(4) A non-global IPv6 address including a zone index as defined by the InetAddressIPv6z textual convention. dns(16) A DNS domain name as defined by the InetAddressDNS textual convention. Each definition of a concrete InetAddressType value must be accompanied by a definition of a textual convention for use with that InetAddressType. To support future extensions, the InetAddressType textual convention SHOULD NOT be sub-typed in object type definitions. It MAY be sub-typed in compliance statements in order to require only a subset of these address types for a compliant implementation. Implementations must ensure that InetAddressType objects and any dependent objects (e.g. InetAddress objects) are consistent. An inconsistentValue error must be generated if an attempt to change an InetAddressType object would, for example, lead to an undefined InetAddress value. In particular, InetAddressType/InetAddress pairs must be changed together if the address type changes (e.g. from ipv6(2) to ipv4(1)). | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| sleGponBase OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.1 | |||
| sleGponBaseInfo OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.1.1 | |||
| sleGponCableDownStatus OBJECT-TYPE cable-down admin status | 1.3.6.1.4.1.6296.101.23.1.1.1 | EnableFlag | read-only | current |
| sleGponCableDownRefCount OBJECT-TYPE cable-down reference count | 1.3.6.1.4.1.6296.101.23.1.1.2 | Integer32 | read-only | current |
| sleGponDefaultServiceProfile OBJECT-TYPE The default service profile. | 1.3.6.1.4.1.6296.101.23.1.1.3 | OCTET STRING | read-only | current |
| sleGponSystemOltVendorId OBJECT-TYPE The OLT Vendor ID. Only valid in case that this equipment is used as ONT. | 1.3.6.1.4.1.6296.101.23.1.1.4 | OCTET STRING (SIZE(1..4)) | read-only | current |
| sleGponSystemOltVersion OBJECT-TYPE The OLT Version Info. Only valid in case that this equipment is used as ONT. | 1.3.6.1.4.1.6296.101.23.1.1.5 | OCTET STRING (SIZE(1..14)) | read-only | current |
| sleGponSystemOltModel OBJECT-TYPE The OLT Model. Only valid in case that this equipment is used as ONT. | 1.3.6.1.4.1.6296.101.23.1.1.6 | OCTET STRING | read-only | current |
| sleGponSystemOltMac OBJECT-TYPE The OLT Mac address. Only valid in case that this equipment is used as ONT. | 1.3.6.1.4.1.6296.101.23.1.1.7 | OCTET STRING (SIZE(0..6)) | read-only | current |
| sleGponSystemOltSlot OBJECT-TYPE The OLT Slot index. Only valid in case that this equipment is used as ONT. | 1.3.6.1.4.1.6296.101.23.1.1.8 | Integer32 | read-only | current |
| sleGponSystemOltPort OBJECT-TYPE The OLT Port index. Only valid in case that this equipment is used as ONT. | 1.3.6.1.4.1.6296.101.23.1.1.9 | Integer32 | read-only | current |
| sleGponSystemOltOnuId OBJECT-TYPE The OLT ONU index. Only valid in case that this equipment is used as ONT. | 1.3.6.1.4.1.6296.101.23.1.1.10 | Integer32 | read-only | current |
| sleGponOnuPasswordType OBJECT-TYPE The Password Type. | 1.3.6.1.4.1.6296.101.23.1.1.11 | INTEGER {hex(0), ascii(1)} | read-only | current |
| sleGponOnuRxPowerUpdateTime OBJECT-TYPE The ONU rx-power update Time 0: disable 1~1440: available values | 1.3.6.1.4.1.6296.101.23.1.1.12 | Integer32 (0..1440) | read-only | current |
| sleGponOltMulticastGem OBJECT-TYPE The OLT multicast Gem. | 1.3.6.1.4.1.6296.101.23.1.1.13 | Integer32 (4094..4095) | read-only | current |
| sleGponOltInterworkIgmpSnooping OBJECT-TYPE The OLT interwork igmp-snooping | 1.3.6.1.4.1.6296.101.23.1.1.14 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponOnuRFPseudowireMode OBJECT-TYPE The ONU RF Pseudowire Mode | 1.3.6.1.4.1.6296.101.23.1.1.15 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponOnuRFPseudowireDstMac OBJECT-TYPE The Destination MAC address by ONU RF Pseudowire. This is valid when only sleGponOnuRFPseudowireMode is enable. | 1.3.6.1.4.1.6296.101.23.1.1.16 | OCTET STRING | read-only | current |
| sleGponOnuActiveMode OBJECT-TYPE The GPON ONU active mode | 1.3.6.1.4.1.6296.101.23.1.1.17 | INTEGER {serialNumber(1), registerationId(2)} | read-only | current |
| sleGponOnuRFPseudowireEthType OBJECT-TYPE The RF Pseudowire Ethernet Type | 1.3.6.1.4.1.6296.101.23.1.1.18 | Integer32 (0..65535) | read-only | current |
| sleGponOnuRFPseudowireVlanId OBJECT-TYPE The RF Pseudowire vlan index | 1.3.6.1.4.1.6296.101.23.1.1.19 | Integer32 (0..4094) | read-only | current |
| sleGponOltRxPowerUpdateTime OBJECT-TYPE The OLT rx-power update cycle 1~1440: available values | 1.3.6.1.4.1.6296.101.23.1.1.20 | Integer32 (1..1440) | read-only | current |
| sleGponOnuAuthRadiusUserName OBJECT-TYPE Onu authentication radius user name | 1.3.6.1.4.1.6296.101.23.1.1.21 | INTEGER {serialNumber(1), modelName(2)} | read-only | current |
| sleGponOnuAuthRadiusUserPassword OBJECT-TYPE Onu authentication radius user password | 1.3.6.1.4.1.6296.101.23.1.1.22 | INTEGER {modelName(1), serialNumber(2)} | read-only | current |
| sleGponOnuReauthStartTime OBJECT-TYPE Onu reathentication start time(hour) | 1.3.6.1.4.1.6296.101.23.1.1.23 | Integer32 (0..23) | read-only | current |
| sleGponOnuReauthEndTime OBJECT-TYPE Onu reathentication end time(hour) | 1.3.6.1.4.1.6296.101.23.1.1.24 | Integer32 (0..23) | read-only | current |
| sleGponOnuAuthFailInterval1 OBJECT-TYPE Onu authentication attempt interval when authentication fails | 1.3.6.1.4.1.6296.101.23.1.1.25 | Integer32 (1..60) | read-only | current |
| sleGponOnuAuthFailInterval2 OBJECT-TYPE Onu authentication attempt interval when authentication fails | 1.3.6.1.4.1.6296.101.23.1.1.26 | Integer32 (1..60) | read-only | current |
| sleGponOnuAuthFailInterval3 OBJECT-TYPE Onu authentication attempt interval when authentication fails | 1.3.6.1.4.1.6296.101.23.1.1.27 | Integer32 (1..60) | read-only | current |
| sleGponOnuAuthFailInterval4 OBJECT-TYPE Onu authentication attempt interval when authentication fails | 1.3.6.1.4.1.6296.101.23.1.1.28 | Integer32 (1..60) | read-only | current |
| sleGponOnuAuthFailInterval5 OBJECT-TYPE Onu authentication attempt interval when authentication fails | 1.3.6.1.4.1.6296.101.23.1.1.29 | Integer32 | read-only | current |
| sleGponOnuAuthServerTimeout OBJECT-TYPE RADIUS Server Timeout seconds | 1.3.6.1.4.1.6296.101.23.1.1.30 | Integer32 (0..3600) | read-only | current |
| sleGponOnuAuthServerRetry OBJECT-TYPE RADIUS Server retry counts | 1.3.6.1.4.1.6296.101.23.1.1.31 | Integer32 (0..10) | read-only | current |
| sleGponOnuAuthPps OBJECT-TYPE Onu Pakcets per second(PPS) | 1.3.6.1.4.1.6296.101.23.1.1.32 | Integer32 (0..65535) | read-only | current |
| sleGponOnuAuthErrorReport OBJECT-TYPE Onu Authentication Error Report enable status | 1.3.6.1.4.1.6296.101.23.1.1.33 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponOnuVideoStatusUpdateTime OBJECT-TYPE The ONU video-status update Time 0: disable 1~1440: available values | 1.3.6.1.4.1.6296.101.23.1.1.34 | Integer32 (0..1440) | read-only | current |
| sleGponOnuPppoeStatusUpdateTime OBJECT-TYPE The ONU Pppoe-status update Time 0: disable 1~1440: available values | 1.3.6.1.4.1.6296.101.23.1.1.35 | Integer32 (0..1440) | read-only | current |
| sleGponBaseControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.1.2 | |||
| sleGponBaseControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.1.2.1 | INTEGER {setCableDownStatus(1), setCableDownRefCnt(2), setDefaultServiceProfile(3), setOnuPasswordType(4), setOnuRxPowerUpdateTime(5), setMulticastGem(6), setInterworkIgmpSnooping(7), setOnuRFPseudowireDstMac(8), setOnuActiveMode(9), setOnuRFPseudowireEthType(10), setOnuRFPseudowireVlanId(11), setOltRxPowerUpdateTime(12), setOnuAuthRadiusUserName(13), setOnuAuthRadiusUserPassword(14), setOnuReauthTime(15), delOnuReauthTime(16), setOnuAuthFailInterval(17), setOnuAuthFailDisable(18), setOnuAuthServerTimeout(19), setOnuAuthPps(20), setOnuAuthErrorReport(21), setOnuVideoStatusUpdateTime(22), setOnuPppoeStatusUpdateTime(23)} | read-write | current |
| sleGponBaseControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.1.2.2 | SleControlStatusType | read-only | current |
| sleGponBaseControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.1.2.3 | Gauge32 | read-write | current |
| sleGponBaseControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.1.2.4 | TimeTicks | read-only | current |
| sleGponBaseControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.1.2.5 | SleControlRequestResultType | read-only | current |
| sleGponBaseControlCableDownStatus OBJECT-TYPE cable-down admin status | 1.3.6.1.4.1.6296.101.23.1.2.6 | EnableFlag | read-write | current |
| sleGponBaseControlCableDwonRefCnt OBJECT-TYPE cable-down reference count | 1.3.6.1.4.1.6296.101.23.1.2.7 | Integer32 | read-write | current |
| sleGponBaseControlDeaultServiceProfile OBJECT-TYPE The default service profile. | 1.3.6.1.4.1.6296.101.23.1.2.8 | OCTET STRING | read-write | current |
| sleGponBaseControlOnuPasswordType OBJECT-TYPE The Password Type. | 1.3.6.1.4.1.6296.101.23.1.2.9 | INTEGER {hex(0), ascii(1)} | read-write | current |
| sleGponBaseControlOnuRxPowerUpdateTime OBJECT-TYPE The ONU rx-power update time 0: disable 1~1440: available values | 1.3.6.1.4.1.6296.101.23.1.2.10 | Integer32 (0..1440) | read-write | current |
| sleGponBaseControlOltMulticastGem OBJECT-TYPE The OLT multicast Gem. | 1.3.6.1.4.1.6296.101.23.1.2.11 | Integer32 (4094..4095) | read-write | current |
| sleGponBaseControlOltInterworkIgmpSnooping OBJECT-TYPE The OLT interwork igmp-snooping | 1.3.6.1.4.1.6296.101.23.1.2.12 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponBaseControlOnuRFPseudowireMode OBJECT-TYPE The ONU RF Pseudowire Mode | 1.3.6.1.4.1.6296.101.23.1.2.13 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponBaseControlOnuRFPseudowireDstMac OBJECT-TYPE The Destination MAC address by ONU RF Pseudowire. This is valid when only sleGponOnuRFPseudowireMode is enable. | 1.3.6.1.4.1.6296.101.23.1.2.14 | OCTET STRING | read-write | current |
| sleGponbaseControlOnuActiveMode OBJECT-TYPE The GPON ONU active mode | 1.3.6.1.4.1.6296.101.23.1.2.15 | INTEGER {serialNumber(1), registerationId(2)} | read-write | current |
| sleGponBaseControlOnuRFPseudowireEthType OBJECT-TYPE The RF Pseudowire Ethernet Type (0:del) | 1.3.6.1.4.1.6296.101.23.1.2.16 | Integer32 (0..65535) | read-write | current |
| sleGponBaseControlOnuRFPseudowireVlanId OBJECT-TYPE The RF Pseudowire vlan index (0:del) | 1.3.6.1.4.1.6296.101.23.1.2.17 | Integer32 (0..4094) | read-write | current |
| sleGponBaseControlOltRxPowerUpdateTime OBJECT-TYPE The OLT rx-power update cycle 1~1440: available values | 1.3.6.1.4.1.6296.101.23.1.2.18 | Integer32 (1..1440) | read-write | current |
| sleGponBaseControlOnuAuthRadiusUserName OBJECT-TYPE Onu authentication radius user name | 1.3.6.1.4.1.6296.101.23.1.2.19 | INTEGER {serialNumber(1), modelName(2)} | read-write | current |
| sleGponBaseControlOnuAuthRadiusUserPassword OBJECT-TYPE Onu authentication radius user password | 1.3.6.1.4.1.6296.101.23.1.2.20 | INTEGER {modelName(1), serialNumber(2)} | read-write | current |
| sleGponBaseControlOnuReauthStartTime OBJECT-TYPE Onu reathentication start time(hour) | 1.3.6.1.4.1.6296.101.23.1.2.21 | Integer32 (0..23) | read-write | current |
| sleGponBaseControlOnuReauthEndTime OBJECT-TYPE Onu reathentication end time(hour) | 1.3.6.1.4.1.6296.101.23.1.2.22 | Integer32 (0..23) | read-write | current |
| sleGponBaseControlOnuAuthFailInterval1 OBJECT-TYPE Onu authentication attempt interval when authentication fails | 1.3.6.1.4.1.6296.101.23.1.2.23 | Integer32 (1..60) | read-write | current |
| sleGponBaseControlOnuAuthFailInterval2 OBJECT-TYPE Onu authentication attempt interval when authentication fails | 1.3.6.1.4.1.6296.101.23.1.2.24 | Integer32 (1..60) | read-write | current |
| sleGponBaseControlOnuAuthFailInterval3 OBJECT-TYPE Onu authentication attempt interval when authentication fails | 1.3.6.1.4.1.6296.101.23.1.2.25 | Integer32 (1..60) | read-write | current |
| sleGponBaseControlOnuAuthFailInterval4 OBJECT-TYPE Onu authentication attempt interval when authentication fails | 1.3.6.1.4.1.6296.101.23.1.2.26 | Integer32 (1..60) | read-write | current |
| sleGponBaseControlOnuAuthFailInterval5 OBJECT-TYPE Onu authentication attempt interval when authentication fails | 1.3.6.1.4.1.6296.101.23.1.2.27 | Integer32 (1..60) | read-write | current |
| sleGponBaseControlOnuAuthServerTimeout OBJECT-TYPE RADIUS Server Timeout secondssleGponOnuAuthServerRetry | 1.3.6.1.4.1.6296.101.23.1.2.28 | Integer32 (0..3600) | read-write | current |
| sleGponBaseControlOnuAuthServerRetry OBJECT-TYPE RADIUS Server retry counts | 1.3.6.1.4.1.6296.101.23.1.2.29 | Integer32 (0..10) | read-write | current |
| sleGponBaseControlOnuAuthPps OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.1.2.30 | Integer32 (0..65535) | read-write | current |
| sleGponBaseControlOnuAuthErrorReport OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.1.2.31 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponBaseControlOnuVideoStatusUpdateTime OBJECT-TYPE The ONU video-status update Time 0: disable 1~1440: available values | 1.3.6.1.4.1.6296.101.23.1.2.32 | Integer32 (0..1440) | read-write | current |
| sleGponBaseControlOnuPppoeStatusUpdateTime OBJECT-TYPE The ONU Pppoe-status update Time 0: disable 1~1440: available values | 1.3.6.1.4.1.6296.101.23.1.2.33 | Integer32 (0..1440) | read-write | current |
| sleGponBaseNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.1.3 | |||
| sleGponOlt OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.2 | |||
| sleGponOltTable OBJECT-TYPE sleGponOltTable | 1.3.6.1.4.1.6296.101.23.2.1 | not-accessible | current | |
| sleGponOltEntry OBJECT-TYPE key: sleGponOltId | 1.3.6.1.4.1.6296.101.23.2.1.1 | not-accessible | current | |
| sleGponOltId OBJECT-TYPE Gpon Olt Index | 1.3.6.1.4.1.6296.101.23.2.1.1.1 | INTEGER (1..2147483647) | read-only | current |
| sleGponOltStatus OBJECT-TYPE Gpon Olt Status | 1.3.6.1.4.1.6296.101.23.2.1.1.2 | INTEGER {disable(0), notReady(1), inactive(2), active(3), activePending(4), deactivePending(5), switchOverPending(6), unknown(255)} | read-only | current |
| sleGponOltDiscoverySerialStart OBJECT-TYPE Serial number acquisition Interval Time (seconds) | 1.3.6.1.4.1.6296.101.23.2.1.1.3 | INTEGER (1..65535) | read-only | current |
| sleGponOltLinkMaxDistance OBJECT-TYPE Optical link distance configuration. 30 10 ~ 30 Km 40 20 ~ 40 Km 50 30 ~ 50 Km 60 40 ~ 60 Km default default distance (0~20Km) | 1.3.6.1.4.1.6296.101.23.2.1.1.4 | INTEGER (1..65535) | read-only | current |
| sleGponOltKeyExchange OBJECT-TYPE Units:seconds, Encryption key exchange configuration. | 1.3.6.1.4.1.6296.101.23.2.1.1.5 | INTEGER (1..65535) | read-only | current |
| sleGponOltSignalCheck OBJECT-TYPE Optic signal check. | 1.3.6.1.4.1.6296.101.23.2.1.1.6 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleGponOltSignalCheckAutoOnuBlock OBJECT-TYPE block ONU automatically using optic power off. | 1.3.6.1.4.1.6296.101.23.2.1.1.7 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleGponOltDescription OBJECT-TYPE OLT description. | 1.3.6.1.4.1.6296.101.23.2.1.1.8 | OCTET STRING | read-only | current |
| sleGponOltAutoToManual OBJECT-TYPE Automatically changes to manual register | 1.3.6.1.4.1.6296.101.23.2.1.1.9 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleGponOltDefaultTcontDBAMode OBJECT-TYPE Default status reports received from ONUs | 1.3.6.1.4.1.6296.101.23.2.1.1.10 | INTEGER {none(0), nsr(1), sr(2), fixed(3)} | read-only | current |
| sleGponOltDefaultTcontFixedBw OBJECT-TYPE Default upstream fixed bandwidth.<128-1031616> | 1.3.6.1.4.1.6296.101.23.2.1.1.11 | INTEGER (1..65535) | read-only | current |
| sleGponOltDefaultTcontAssuredBw OBJECT-TYPE Default upstream assured bandwidth.<0-1031616> | 1.3.6.1.4.1.6296.101.23.2.1.1.12 | INTEGER (1..65535) | read-only | current |
| sleGponOltDefaultTcontMaxBw OBJECT-TYPE Default upstream max bandwidth.<128-1031616> | 1.3.6.1.4.1.6296.101.23.2.1.1.13 | INTEGER (1..65535) | read-only | current |
| sleGponOltDefaultProfileName OBJECT-TYPE Default Profile Name | 1.3.6.1.4.1.6296.101.23.2.1.1.14 | OCTET STRING | read-only | current |
| sleGponOltFecModeUS OBJECT-TYPE UpStream FEC mode | 1.3.6.1.4.1.6296.101.23.2.1.1.15 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleGponOltFecModeDS OBJECT-TYPE DownStream FEC mode | 1.3.6.1.4.1.6296.101.23.2.1.1.16 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleGponOltMacAgingTime OBJECT-TYPE Mac Aging Time | 1.3.6.1.4.1.6296.101.23.2.1.1.17 | INTEGER (30..2147480) | read-only | current |
| sleGponOltTransceiverPort OBJECT-TYPE Transceiver Port | 1.3.6.1.4.1.6296.101.23.2.1.1.18 | INTEGER {portA(1), portB(2)} | read-only | current |
| sleGponOltActivateStatus OBJECT-TYPE OLT activation status. | 1.3.6.1.4.1.6296.101.23.2.1.1.19 | INTEGER {activate(1), deActivate(2)} | read-only | current |
| sleGponOltProtection OBJECT-TYPE OLT protection status. | 1.3.6.1.4.1.6296.101.23.2.1.1.20 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleGponOltActiveOnuCount OBJECT-TYPE The active ONU count. | 1.3.6.1.4.1.6296.101.23.2.1.1.21 | Integer32 | read-only | current |
| sleGponOltInactiveOnuCount OBJECT-TYPE The inactive ONU count. | 1.3.6.1.4.1.6296.101.23.2.1.1.22 | Integer32 | read-only | current |
| sleGponOltLinkUpCount OBJECT-TYPE The link up count | 1.3.6.1.4.1.6296.101.23.2.1.1.23 | Counter32 | read-only | current |
| sleGponOltLinkDownCount OBJECT-TYPE The link down count | 1.3.6.1.4.1.6296.101.23.2.1.1.24 | Counter32 | read-only | current |
| sleGponOltAuthenCount OBJECT-TYPE The number of password-authed onu. | 1.3.6.1.4.1.6296.101.23.2.1.1.25 | Counter32 | read-only | current |
| sleGponOltElapsedTimeAfterClearAuthStats OBJECT-TYPE The elapsed time after clearing auth-related statistics | 1.3.6.1.4.1.6296.101.23.2.1.1.26 | Counter64 | read-only | current |
| sleGponOltUpElapsedTime OBJECT-TYPE The elapsed time from link is up. | 1.3.6.1.4.1.6296.101.23.2.1.1.27 | Counter64 | read-only | current |
| sleGponOltDownElapsedTime OBJECT-TYPE The elapsed time from link is down. | 1.3.6.1.4.1.6296.101.23.2.1.1.28 | Counter64 | read-only | current |
| sleGponOltOpticParam OBJECT-TYPE The optic-module parmater. default : Default optic configuration - FUJITSU relaxy configuration. user1 : User1 optic configuration - Broadlight suggested. | 1.3.6.1.4.1.6296.101.23.2.1.1.29 | INTEGER {default(1), user1(2), unknown(255)} | read-only | current |
| sleGponOltSrcMacMonitorStatus OBJECT-TYPE The Source Mac Monitor status. | 1.3.6.1.4.1.6296.101.23.2.1.1.30 | EnableFlag | read-only | current |
| sleGponOltSrcMacMonitorAutoBlock OBJECT-TYPE The Source Mac Monitor Auto block status | 1.3.6.1.4.1.6296.101.23.2.1.1.31 | EnableFlag | read-only | current |
| sleGponOltSrcMacMonitoEexpireTimeout OBJECT-TYPE The Source Mac Monitor Expire time. | 1.3.6.1.4.1.6296.101.23.2.1.1.32 | INTEGER (0 | 60..65535) | read-only | current |
| sleGponOltTotalUsBw OBJECT-TYPE The OLT Total US bandwidth. | 1.3.6.1.4.1.6296.101.23.2.1.1.33 | INTEGER (1031616..1244160 | 140000000) | read-only | current |
| sleGponOltMaxOnuCount OBJECT-TYPE The max ONU count | 1.3.6.1.4.1.6296.101.23.2.1.1.34 | INTEGER (1..65535) | read-only | current |
| sleGponOltAntiSpoofingFilter OBJECT-TYPE The Anti-Spoofing Configuration | 1.3.6.1.4.1.6296.101.23.2.1.1.35 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleGponOltAntiSpoofingExpireTime OBJECT-TYPE The Expire Timeout Configuration. Timeout Seconds (Default : 300 sec) | 1.3.6.1.4.1.6296.101.23.2.1.1.36 | INTEGER (0 | 60..65535) | read-only | current |
| sleGponOltBwBEMethod OBJECT-TYPE The OLT band-width scheduler. | 1.3.6.1.4.1.6296.101.23.2.1.1.37 | INTEGER {guaranteed(0), maximum(1)} | read-only | current |
| sleGponOltDsGemMapping OBJECT-TYPE The OLT ds gem mapping. | 1.3.6.1.4.1.6296.101.23.2.1.1.38 | INTEGER {mac(0), macVid(1), vid(2), perFlowByMac(3), perFlowByMacVid(4)} | read-only | current |
| sleGponOltFixedTcontCount OBJECT-TYPE The fixed tcont count. (0 is disable). | 1.3.6.1.4.1.6296.101.23.2.1.1.39 | Integer32 (0..384) | read-only | current |
| sleGponOltDynamicTcontCount OBJECT-TYPE The dynamic tcont count. (0 is disable). | 1.3.6.1.4.1.6296.101.23.2.1.1.40 | Integer32 (0..384) | read-only | current |
| sleGponOltPortCount OBJECT-TYPE The port count. (0 is disable). | 1.3.6.1.4.1.6296.101.23.2.1.1.41 | Integer32 (0..3966) | read-only | current |
| sleGponOltDeactiveMonitorStatus OBJECT-TYPE The deactive monitor status. | 1.3.6.1.4.1.6296.101.23.2.1.1.42 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponOltDeactiveMonitorRaisePercent OBJECT-TYPE The deactive monitor raise percent. | 1.3.6.1.4.1.6296.101.23.2.1.1.43 | Integer32 (1..100) | read-only | current |
| sleGponOltDeactiveMonitorClearPercent OBJECT-TYPE The deactive monitor clear percent. | 1.3.6.1.4.1.6296.101.23.2.1.1.44 | Integer32 (1..100) | read-only | current |
| sleGponOltDeactiveMonitorPeriod OBJECT-TYPE The deactive monitor period. (per 10 multiple) | 1.3.6.1.4.1.6296.101.23.2.1.1.45 | Integer32 (10..86400) | read-only | current |
| sleGponOltDeactiveMonitorActiveOnuCount OBJECT-TYPE the OLT deactive monitor active ONU count. | 1.3.6.1.4.1.6296.101.23.2.1.1.46 | Integer32 | read-only | current |
| sleGponOltDeactiveMonitorCurrentPercent OBJECT-TYPE The OLT deactive monitor current percent.(%) | 1.3.6.1.4.1.6296.101.23.2.1.1.47 | Integer32 (0..100) | read-only | current |
| sleGponOltDeactiveMonitorInAlamStatus OBJECT-TYPE The OLT deactive monitor alarm status. | 1.3.6.1.4.1.6296.101.23.2.1.1.48 | INTEGER {off(0), on(1)} | read-only | current |
| sleGponOltBerUpInterval OBJECT-TYPE The OLT BER up interval | 1.3.6.1.4.1.6296.101.23.2.1.1.49 | Integer32 (1000..10000) | read-only | current |
| sleGponOltBerDownInterval OBJECT-TYPE The OLT BER down interval | 1.3.6.1.4.1.6296.101.23.2.1.1.50 | Integer32 (1000..10000) | read-only | current |
| sleGponOltBerSfThreshold OBJECT-TYPE The OLT BER SF threshold | 1.3.6.1.4.1.6296.101.23.2.1.1.51 | Integer32 (3..8) | read-only | current |
| sleGponOltBerSdThreshold OBJECT-TYPE The OLT BER SD threshold | 1.3.6.1.4.1.6296.101.23.2.1.1.52 | Integer32 (4..9) | read-only | current |
| sleGponOltUsFlowMapping OBJECT-TYPE The OLT us flow mapping | 1.3.6.1.4.1.6296.101.23.2.1.1.53 | INTEGER {perMapper(0), perGem(1)} | read-only | current |
| sleGponOltDsQosMappingQueueCount OBJECT-TYPE The OLT ds Qos mapping Queue Count | 1.3.6.1.4.1.6296.101.23.2.1.1.54 | Integer32 (0..8) | read-only | current |
| sleGponOltDsQosMappingCos0Queue OBJECT-TYPE The OLT ds Qos mapping Cos 0 to Priority Queue | 1.3.6.1.4.1.6296.101.23.2.1.1.55 | Integer32 (0..7) | read-only | current |
| sleGponOltDsQosMappingCos1Queue OBJECT-TYPE The OLT ds Qos mapping Cos 1 to Priority Queue | 1.3.6.1.4.1.6296.101.23.2.1.1.56 | Integer32 (0..7) | read-only | current |
| sleGponOltDsQosMappingCos2Queue OBJECT-TYPE The OLT ds Qos mapping Cos 2 to Priority Queue | 1.3.6.1.4.1.6296.101.23.2.1.1.57 | Integer32 (0..7) | read-only | current |
| sleGponOltDsQosMappingCos3Queue OBJECT-TYPE The OLT ds Qos mapping Cos 3 to Priority Queue | 1.3.6.1.4.1.6296.101.23.2.1.1.58 | Integer32 (0..7) | read-only | current |
| sleGponOltDsQosMappingCos4Queue OBJECT-TYPE The OLT ds Qos mapping Cos 4 to Priority Queue | 1.3.6.1.4.1.6296.101.23.2.1.1.59 | Integer32 (0..7) | read-only | current |
| sleGponOltDsQosMappingCos5Queue OBJECT-TYPE The OLT ds Qos mapping Cos 5 to Priority Queue | 1.3.6.1.4.1.6296.101.23.2.1.1.60 | Integer32 (0..7) | read-only | current |
| sleGponOltDsQosMappingCos6Queue OBJECT-TYPE The OLT ds Qos mapping Cos 6 to Priority Queue | 1.3.6.1.4.1.6296.101.23.2.1.1.61 | Integer32 (0..7) | read-only | current |
| sleGponOltDsQosMappingCos7Queue OBJECT-TYPE The OLT ds Qos mapping Cos 7 to Priority Queue | 1.3.6.1.4.1.6296.101.23.2.1.1.62 | Integer32 (0..7) | read-only | current |
| sleGponOltDsQosMappingMode OBJECT-TYPE The OLT us flow mapping | 1.3.6.1.4.1.6296.101.23.2.1.1.63 | INTEGER {none(0), mac(1), macVid(2), vid(3)} | read-only | current |
| sleGponOltPortServiceStatus OBJECT-TYPE The GPON port service status. | 1.3.6.1.4.1.6296.101.23.2.1.1.64 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponOltAutoOnuBlockContMoveMac OBJECT-TYPE The Continuous move mac Auto block status | 1.3.6.1.4.1.6296.101.23.2.1.1.65 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponOltRxPowerUpdateMode OBJECT-TYPE The OLT Rx-power update mode | 1.3.6.1.4.1.6296.101.23.2.1.1.66 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponOltRxPowerLowThreshold OBJECT-TYPE The OLT Rx-power Low threshold (Units 0.1dbm) 255: unused | 1.3.6.1.4.1.6296.101.23.2.1.1.67 | Integer32 (-1270..0 | 255) | read-only | current |
| sleGponOltRxPowerHighThreshold OBJECT-TYPE The OLT Rx-power High threshold (Units 0.1dbm) 255: unused | 1.3.6.1.4.1.6296.101.23.2.1.1.68 | Integer32 (-1270..0 | 255) | read-only | current |
| sleGponOltOnuInactiveAgingTime OBJECT-TYPE The ONU Inactive aging time (Units Days) 0 means disable | 1.3.6.1.4.1.6296.101.23.2.1.1.69 | Integer32 (0..30) | read-only | current |
| sleGponOltBcastThreshold OBJECT-TYPE The Broadcast Storm Control threshold of GPON OLT Port. | 1.3.6.1.4.1.6296.101.23.2.1.1.70 | Integer32 | read-only | current |
| sleGponOltMcastThreshold OBJECT-TYPE The Multicast Storm Control threshold of GPON OLT Port. | 1.3.6.1.4.1.6296.101.23.2.1.1.71 | Integer32 | read-only | current |
| sleGponOltDlfThreshold OBJECT-TYPE The DLF Storm Control threshold of GPON OLT Port. | 1.3.6.1.4.1.6296.101.23.2.1.1.72 | Integer32 | read-only | current |
| sleGponOltOnuAuthControlMode OBJECT-TYPE The Onu Authentication Control Mode | 1.3.6.1.4.1.6296.101.23.2.1.1.73 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponOltTransceiverType OBJECT-TYPE OLT Transceiver Type | 1.3.6.1.4.1.6296.101.23.2.1.1.74 | INTEGER {fujitsu(1), neophotonics(2), neophotonicsA(3), hisense(4), optowiz(5), superxon(6), wtd(7), sourcephotonics(8)} | read-only | current |
| sleGponOltOmccRecovery OBJECT-TYPE The Onu OMCC Recovery Mode | 1.3.6.1.4.1.6296.101.23.2.1.1.75 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponOltOmccRecoveryMethod OBJECT-TYPE The Onu OMCC Recovery method | 1.3.6.1.4.1.6296.101.23.2.1.1.76 | INTEGER {deactivation(0), reset(1)} | read-only | current |
| sleGponOltOmccRecoveryThreshold OBJECT-TYPE The Onu OMCC Recovery threshold Default value is 5 | 1.3.6.1.4.1.6296.101.23.2.1.1.77 | Integer32 (5..720) | read-only | current |
| sleGponOltControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.2.2 | |||
| sleGponOltControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.2.2.1 | INTEGER {setDiscoverySerialStart(1), setDiscoverySerialStop(2), setLinkMaxDistance(3), setKeyExchangeStart(4), setKeyExchangeStop(5), setSignalCheck(6), setSignalCheckAutoOnuBlock(7), setDescription(8), setAutoToManual(9), setDefaultTcont(10), setDefaultTcontRemove(11), setDefaultProfile(12), setDefaultProfileRemove(13), setOltFecModeUS(14), setOltFecModeDs(15), setOltMacAgingTime(16), setOltTransceiverPort(17), setOltActivateStatus(18), setOltProtection(19), clearOltAuthStats(20), setOltOpticParam(21), setOltSrcMacMonitor(22), setOltTotalUsBw(23), setMaxOnuCount(24), setAntiSpoofingFilter(25), setBwBEMethod(26), setDsGemMapping(27), setFixedTcontCount(28), setDynamicTcontCount(29), setPortCount(30), setDeactiveMonitorStatus(31), setDeactiveMonitorRaisePercent(32), setDeactiveMonitorClearPercent(33), setDeactiveMonitorPeriod(34), clearDeactiveMonitorAlarm(35), setOltRegister(36), setOltBerUsInterval(37), setOltBerDsInterval(38), setOltBerSfThreshold(39), setOltBerSdThreshold(40), setUsFlowMapping(41), setDsQosMapping(42), clearDsQosMapping(43), setDsQosMappingMode(44), setAutoOnuBlockContMoveMac(45), setOltRxPowerUpdateMode(46), setOltRxPowerThreshold(47), setOnuInactiveAgingTime(48), setOltStormControlThreshold(49), setOnuAuthControlMode(50), setOnuAuthReauthentication(51), setOltTransceiverType(52), setOltOmccRecovery(53)} | read-write | current |
| sleGponOltControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.2.2.2 | SleControlStatusType | read-only | current |
| sleGponOltControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.2.2.3 | Gauge32 | read-write | current |
| sleGponOltControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.2.2.4 | TimeTicks | read-only | current |
| sleGponOltControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.2.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOltControllndex OBJECT-TYPE Gpon Olt Index | 1.3.6.1.4.1.6296.101.23.2.2.6 | INTEGER (1..2147483647) | read-write | current |
| sleGponOltControlDiscoverySerialStart OBJECT-TYPE Serial number acquisition Interval Time (seconds) <1-1200> | 1.3.6.1.4.1.6296.101.23.2.2.7 | INTEGER (1..65535) | read-write | current |
| sleGponOltControlLinkMaxDistance OBJECT-TYPE Optical link distance configuration. 30 10 ~ 30 Km 40 20 ~ 40 Km 50 30 ~ 50 Km 60 40 ~ 60 Km default default distance (0~20Km) | 1.3.6.1.4.1.6296.101.23.2.2.8 | INTEGER (1..65535) | read-write | current |
| sleGponOltControlKeyExchange OBJECT-TYPE Units:seconds, Encryption key exchange configuration. <10-86400> | 1.3.6.1.4.1.6296.101.23.2.2.9 | INTEGER (1..65535) | read-only | current |
| sleGponOltControlSignalCheck OBJECT-TYPE Optic signal check. | 1.3.6.1.4.1.6296.101.23.2.2.10 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleGponOltControlSignalCheckAutoOnuBlock OBJECT-TYPE block ONU automatically using optic power off. | 1.3.6.1.4.1.6296.101.23.2.2.11 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleGponOltControlDescription OBJECT-TYPE OLT Description. | 1.3.6.1.4.1.6296.101.23.2.2.12 | OCTET STRING | read-write | current |
| sleGponOltControlAutoToManual OBJECT-TYPE Automatically changes to manual register | 1.3.6.1.4.1.6296.101.23.2.2.13 | INTEGER {enable(1), disable(2)} | read-write | current |
| sleGponOltControlDefaultTcontDBAMode OBJECT-TYPE Default status reports received from ONUs | 1.3.6.1.4.1.6296.101.23.2.2.14 | INTEGER {nsr(1), sr(2), fixed(3)} | read-write | current |
| sleGponOltControlDefaultTcontFixedBw OBJECT-TYPE Default upstream fixed bandwidth.<128-1031616> | 1.3.6.1.4.1.6296.101.23.2.2.15 | INTEGER (1..65535) | read-write | current |
| sleGponOltControlDefaultTcontAssuredBw OBJECT-TYPE Default upstream assured bandwidth.<0-1031616> | 1.3.6.1.4.1.6296.101.23.2.2.16 | INTEGER (1..65535) | read-write | current |
| sleGponOltControlDefaultTcontMaxBw OBJECT-TYPE Default upstream max bandwidth.<128-1031616> | 1.3.6.1.4.1.6296.101.23.2.2.17 | INTEGER (1..65535) | read-write | current |
| sleGponOltControlDefaultProfileName OBJECT-TYPE Default Profile Name | 1.3.6.1.4.1.6296.101.23.2.2.18 | OCTET STRING | read-write | current |
| sleGponOltControlFecModeUS OBJECT-TYPE UpStream FEC mode | 1.3.6.1.4.1.6296.101.23.2.2.19 | INTEGER {enable(1), disable(2)} | read-write | current |
| sleGponOltControlFecModeDS OBJECT-TYPE DownStream FEC mode | 1.3.6.1.4.1.6296.101.23.2.2.20 | INTEGER {enable(1), disable(2)} | read-write | current |
| sleGponOltControlMacAgingTime OBJECT-TYPE Mac Aging Time | 1.3.6.1.4.1.6296.101.23.2.2.21 | INTEGER (30..2147480) | read-write | current |
| sleGponOltControlTransceiverPort OBJECT-TYPE Transceiver Port | 1.3.6.1.4.1.6296.101.23.2.2.22 | INTEGER {portA(1), portB(2)} | read-write | current |
| sleGponOltControlActivateStatus OBJECT-TYPE OLT activation status. | 1.3.6.1.4.1.6296.101.23.2.2.23 | INTEGER {activate(1), deActivate(2)} | read-write | current |
| sleGponOltControlProtection OBJECT-TYPE OLT protection status. | 1.3.6.1.4.1.6296.101.23.2.2.24 | INTEGER {enable(1), disable(2)} | read-write | current |
| sleGponOltControlOpticParam OBJECT-TYPE The optic-module parmater. default : Default optic configuration - FUJITSU relaxy configuration. user1 : User1 optic configuration - Broadlight suggested. | 1.3.6.1.4.1.6296.101.23.2.2.25 | INTEGER {default(1), user1(2)} | read-write | current |
| sleGponOltControlSrcMacMonitorStatus OBJECT-TYPE The Source Mac Monitor status. | 1.3.6.1.4.1.6296.101.23.2.2.26 | EnableFlag | read-write | current |
| sleGponOltControlSrcMacMonitorAutoBlock OBJECT-TYPE The Source Mac Monitor Auto block status | 1.3.6.1.4.1.6296.101.23.2.2.27 | EnableFlag | read-write | current |
| sleGponOltControlSrcMacMonitoEexpireTimeout OBJECT-TYPE The Source Mac Monitor Expire time. | 1.3.6.1.4.1.6296.101.23.2.2.28 | INTEGER (0 | 60..65535) | read-write | current |
| sleGponOltControlTotalUsBw OBJECT-TYPE The OLT Total US bandwidth. | 1.3.6.1.4.1.6296.101.23.2.2.29 | INTEGER (1031616..1244160 | 140000000) | read-write | current |
| sleGponOltControlMaxOnuCount OBJECT-TYPE The max ONU count | 1.3.6.1.4.1.6296.101.23.2.2.30 | INTEGER (1..65535) | read-write | current |
| sleGponOltControlAntiSpoofingFilter OBJECT-TYPE The Anti-Spoofing Configuration | 1.3.6.1.4.1.6296.101.23.2.2.31 | INTEGER {enable(1), disable(2)} | read-write | current |
| sleGponOltControlAntiSpoofingExpireTime OBJECT-TYPE The Expire Timeout Configuration. Timeout Seconds (Default : 300 sec) | 1.3.6.1.4.1.6296.101.23.2.2.32 | INTEGER (0 | 60..65535) | read-write | current |
| sleGponOltControlBwBEMethod OBJECT-TYPE The OLT band-width scheduler. | 1.3.6.1.4.1.6296.101.23.2.2.33 | INTEGER {guaranteed(0), maximum(1)} | read-write | current |
| sleGponOltControlDsGemMapping OBJECT-TYPE The OLT ds gem mapping. | 1.3.6.1.4.1.6296.101.23.2.2.34 | INTEGER {mac(0), macVid(1), vid(2), perFlowByMac(3), perFlowByMacVid(4)} | read-write | current |
| sleGponOltControlFixedTcontCount OBJECT-TYPE The fixed tcont count | 1.3.6.1.4.1.6296.101.23.2.2.35 | Integer32 (0..384) | read-write | current |
| sleGponOltControlDynamicTcontCount OBJECT-TYPE The dynamic tcont count | 1.3.6.1.4.1.6296.101.23.2.2.36 | Integer32 (0..384) | read-write | current |
| sleGponOltControlPortCount OBJECT-TYPE The port count | 1.3.6.1.4.1.6296.101.23.2.2.37 | Integer32 (0..3966) | read-write | current |
| sleGponOltControlDeactiveMonitorStatus OBJECT-TYPE The deactive monitor status. | 1.3.6.1.4.1.6296.101.23.2.2.38 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponOltControlDeactiveMonitorRaisePercent OBJECT-TYPE The deactive monitor raise percent. | 1.3.6.1.4.1.6296.101.23.2.2.39 | Integer32 (1..100) | read-write | current |
| sleGponOltControlDeactiveMonitorClearPercent OBJECT-TYPE The deactive monitor clear percent. | 1.3.6.1.4.1.6296.101.23.2.2.40 | Integer32 (1..100) | read-write | current |
| sleGponOltControlDeactiveMonitorPeriod OBJECT-TYPE The deactive monitor period. (per 10 multiple) | 1.3.6.1.4.1.6296.101.23.2.2.41 | Integer32 (10..86400) | read-write | current |
| sleGponOltControlBerUpInterval OBJECT-TYPE The OLT BER up interval | 1.3.6.1.4.1.6296.101.23.2.2.42 | Integer32 (1000..10000) | read-write | current |
| sleGponOltControlBerDownInterval OBJECT-TYPE The OLT BER down interval | 1.3.6.1.4.1.6296.101.23.2.2.43 | Integer32 (1000..10000) | read-write | current |
| sleGponOltControlBerSfThreshold OBJECT-TYPE The OLT BER SF threshold | 1.3.6.1.4.1.6296.101.23.2.2.44 | Integer32 (3..8) | read-write | current |
| sleGponOltControlBerSdThreshold OBJECT-TYPE The OLT BER SD threshold | 1.3.6.1.4.1.6296.101.23.2.2.45 | Integer32 (4..9) | read-write | current |
| sleGponOltControlUsFlowMapping OBJECT-TYPE The OLT us flow mapping | 1.3.6.1.4.1.6296.101.23.2.2.46 | INTEGER {perMapper(0), perGem(1)} | read-write | current |
| sleGponOltControlDsQosMappingQueueCount OBJECT-TYPE The OLT ds Qos mapping Queue Count | 1.3.6.1.4.1.6296.101.23.2.2.47 | Integer32 (0..8) | read-write | current |
| sleGponOltControlDsQosMappingCos0Queue OBJECT-TYPE The OLT ds Qos mapping Cos 0 to Priority Queue | 1.3.6.1.4.1.6296.101.23.2.2.48 | Integer32 (0..7) | read-write | current |
| sleGponOltControlDsQosMappingCos1Queue OBJECT-TYPE The OLT ds Qos mapping Cos 1 to Priority Queue | 1.3.6.1.4.1.6296.101.23.2.2.49 | Integer32 (0..7) | read-write | current |
| sleGponOltControlDsQosMappingCos2Queue OBJECT-TYPE The OLT ds Qos mapping Cos 2 to Priority Queue | 1.3.6.1.4.1.6296.101.23.2.2.50 | Integer32 (0..7) | read-write | current |
| sleGponOltControlDsQosMappingCos3Queue OBJECT-TYPE The OLT ds Qos mapping Cos 3 to Priority Queue | 1.3.6.1.4.1.6296.101.23.2.2.51 | Integer32 (0..7) | read-write | current |
| sleGponOltControlDsQosMappingCos4Queue OBJECT-TYPE The OLT ds Qos mapping Cos 4 to Priority Queue | 1.3.6.1.4.1.6296.101.23.2.2.52 | Integer32 (0..7) | read-write | current |
| sleGponOltControlDsQosMappingCos5Queue OBJECT-TYPE The OLT ds Qos mapping Cos 5 to Priority Queue | 1.3.6.1.4.1.6296.101.23.2.2.53 | Integer32 (0..7) | read-write | current |
| sleGponOltControlDsQosMappingCos6Queue OBJECT-TYPE The OLT ds Qos mapping Cos 6 to Priority Queue | 1.3.6.1.4.1.6296.101.23.2.2.54 | Integer32 (0..7) | read-write | current |
| sleGponOltControlDsQosMappingCos7Queue OBJECT-TYPE The OLT ds Qos mapping Cos 7 to Priority Queue | 1.3.6.1.4.1.6296.101.23.2.2.55 | Integer32 (0..7) | read-write | current |
| sleGponOltControlDsQosMappingMode OBJECT-TYPE The OLT us flow mapping | 1.3.6.1.4.1.6296.101.23.2.2.56 | INTEGER {none(0), mac(1), macVid(2), vid(3)} | read-write | current |
| sleGponOltControlAutoOnuBlockContMoveMac OBJECT-TYPE The Continuous move mac Auto block status | 1.3.6.1.4.1.6296.101.23.2.2.57 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponOltControlRxPowerUpdateMode OBJECT-TYPE The OLT Rx-power update mode | 1.3.6.1.4.1.6296.101.23.2.2.58 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponOltControlRxPowerLowThreshold OBJECT-TYPE The OLT Rx-power Low threshold (Units 0.1dbm) 255: unused | 1.3.6.1.4.1.6296.101.23.2.2.59 | Integer32 (-1270..0 | 255) | read-write | current |
| sleGponOltControlRxPowerHighThreshold OBJECT-TYPE The OLT Rx-power Highthreshold (Units 0.1dbm) 255: unused | 1.3.6.1.4.1.6296.101.23.2.2.60 | Integer32 (-1270..0 | 255) | read-write | current |
| sleGponOltControlOnuInactiveAgingTime OBJECT-TYPE The ONU Inactive aging time (Units Days) 0 means disable | 1.3.6.1.4.1.6296.101.23.2.2.61 | Integer32 (0..30) | read-write | current |
| sleGponOltControlBcastThreshold OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.2.62 | Integer32 | read-write | current |
| sleGponOltControlMulticastThreshold OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.2.63 | Integer32 | read-write | current |
| sleGponOltControlDLFThreshold OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.2.64 | Integer32 | read-write | current |
| sleGponOltControlOnuAuthControlMode OBJECT-TYPE The Onu Authentication Control Mode | 1.3.6.1.4.1.6296.101.23.2.2.65 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponOltControlTransceiverType OBJECT-TYPE OLT Transceiver Type | 1.3.6.1.4.1.6296.101.23.2.2.66 | INTEGER {fujitsu(1), neophotonics(2), neophotonicsA(3), hisense(4), optowiz(5), superxon(6), wtd(7), sourcephotonics(8)} | read-write | current |
| sleGponOltControlOmccRecovery OBJECT-TYPE The Onu OMCC Recovery Mode | 1.3.6.1.4.1.6296.101.23.2.2.67 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponOltControlOmccRecoveryMethod OBJECT-TYPE The Onu OMCC Recovery method | 1.3.6.1.4.1.6296.101.23.2.2.68 | INTEGER {deactivation(0), reset(1)} | read-write | current |
| sleGponOltControlOmccRecoveryThreshold OBJECT-TYPE The Onu OMCC Recovery threshold Default value is 5 | 1.3.6.1.4.1.6296.101.23.2.2.69 | Integer32 (5..720) | read-write | current |
| sleGponOltNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.2.3 | |||
| sleGponOnu OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.3 | |||
| sleGponOnuTable OBJECT-TYPE sleGponOnuTable | 1.3.6.1.4.1.6296.101.23.3.1 | not-accessible | current | |
| sleGponOnuEntry OBJECT-TYPE key: sleGponOltId, sleGponOnuId | 1.3.6.1.4.1.6296.101.23.3.1.1 | not-accessible | current | |
| sleGponOnuId OBJECT-TYPE Gpon Onu Index | 1.3.6.1.4.1.6296.101.23.3.1.1.1 | INTEGER (1..256) | read-only | current |
| sleGponOnuStatus OBJECT-TYPE Gpon Onu Status | 1.3.6.1.4.1.6296.101.23.3.1.1.2 | INTEGER {invalid(0), inactive(1), active(2), running(3), activePending(4), deactivePending(5), disablePending(6), disable(7), unknown(255)} | read-only | current |
| sleGponOnuMode OBJECT-TYPE Gpon Onu register-mode | 1.3.6.1.4.1.6296.101.23.3.1.1.3 | INTEGER {notlearned(0), manual(1), auto(2)} | read-only | current |
| sleGponOnuSerial OBJECT-TYPE ONU Serial Number | 1.3.6.1.4.1.6296.101.23.3.1.1.4 | OCTET STRING (SIZE(1..64)) | read-only | current |
| sleGponOnuPasswd OBJECT-TYPE ONU Password | 1.3.6.1.4.1.6296.101.23.3.1.1.5 | OCTET STRING (SIZE(1..64)) | read-only | current |
| sleGponOnuPasswdMode OBJECT-TYPE Password auto-learning | 1.3.6.1.4.1.6296.101.23.3.1.1.6 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleGponOnuEncMode OBJECT-TYPE Encryption mode | 1.3.6.1.4.1.6296.101.23.3.1.1.7 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleGponOnuProfile OBJECT-TYPE Onu assigned Profile. | 1.3.6.1.4.1.6296.101.23.3.1.1.8 | OCTET STRING | read-only | current |
| sleGponOnuHostname OBJECT-TYPE ONU Hostname. | 1.3.6.1.4.1.6296.101.23.3.1.1.9 | OCTET STRING | read-only | current |
| sleGponOnuDistance OBJECT-TYPE ONU Distance information. | 1.3.6.1.4.1.6296.101.23.3.1.1.10 | INTEGER (1..65535) | read-only | current |
| sleGponOnuHwAddress OBJECT-TYPE Onu System H/W address. | 1.3.6.1.4.1.6296.101.23.3.1.1.11 | OCTET STRING (SIZE(0..6)) | read-only | current |
| sleGponOnuNosActiveVersion OBJECT-TYPE ONU Firmware Version of Active | 1.3.6.1.4.1.6296.101.23.3.1.1.12 | OCTET STRING | read-only | current |
| sleGponOnuNosStandbyVersion OBJECT-TYPE ONU Firmware Version of Standby | 1.3.6.1.4.1.6296.101.23.3.1.1.13 | OCTET STRING | read-only | current |
| sleGponOnuNosUpgradeStatus OBJECT-TYPE Onu firmware upgrade status. | 1.3.6.1.4.1.6296.101.23.3.1.1.14 | INTEGER {none(0), downloadProgress(1), downloadProgressforDevBusy(2), endDownloadForDevBusy(3), downloadComplete(4), downloadFail(5), commitWaitValid(6), commitProgress(7), commitProgressforDevBusy(8), commitFailForDevBusy(9), commitComplete(10), commitFail(11), changeActiveComplete(12), changeActiveFailforDevBusy(13), changeActiveFail(14), autoUpgradeResetWaiting(15), autoUpgradeFail(16), endDownloadSend(17), endDownloadComplete(18), bootloaderDownloadProgress(19), bootloaderDownloadDevBusy(20), bootloaderEndDownloadDevBusy(21), bootloaderDownloadComplete(22), bootloaderDownloadFail(23), bootloaderEndDownloadRequest(24), bootloaderEndDownloadComplete(25), autoUpgradeComplete(26), downloadWait(27), unknown(255)} | read-only | current |
| sleGponOnuIsFirst OBJECT-TYPE Whether it is first registration or not. | 1.3.6.1.4.1.6296.101.23.3.1.1.15 | INTEGER {true(1), false(2)} | accessible-for-notify | current |
| sleGponOnuRxPower OBJECT-TYPE Rx Optical power. | 1.3.6.1.4.1.6296.101.23.3.1.1.16 | INTEGER (1..65535) | read-only | current |
| sleGponOnuModelName OBJECT-TYPE ONU Model name. | 1.3.6.1.4.1.6296.101.23.3.1.1.17 | OCTET STRING | read-only | current |
| sleGponOnuDescription OBJECT-TYPE ONU description. | 1.3.6.1.4.1.6296.101.23.3.1.1.18 | OCTET STRING | read-only | current |
| sleGponOnuNosAutoUpgradeWaitStatus OBJECT-TYPE Onu firmware auto-upgrade wait status. | 1.3.6.1.4.1.6296.101.23.3.1.1.19 | INTEGER {waiting(1), nowaiting(2)} | read-only | current |
| sleGponOnuNosAutoUpgradeFailCount OBJECT-TYPE Onu firmware upgrade fail count. | 1.3.6.1.4.1.6296.101.23.3.1.1.20 | INTEGER (1..65535) | read-only | current |
| sleGponOnuOltRxPower OBJECT-TYPE Rx Optical power of olt-side. | 1.3.6.1.4.1.6296.101.23.3.1.1.21 | INTEGER (1..65535) | read-only | current |
| sleGponOnuRTD OBJECT-TYPE The RTD. | 1.3.6.1.4.1.6296.101.23.3.1.1.22 | Integer32 | read-only | current |
| sleGponOnuLinkUpTime OBJECT-TYPE The elapsed time after ont is up. | 1.3.6.1.4.1.6296.101.23.3.1.1.23 | Counter64 | read-only | current |
| sleGponOnuAuthenticationStatus OBJECT-TYPE The authentication status. | 1.3.6.1.4.1.6296.101.23.3.1.1.24 | INTEGER {normal(1), rangingFail(2), passwdInconsistencyFail(3), passwdMismatchFail(4), passwdTimeoutFail(5), passwdONUAlarmFail(6), passwdDisableEventFail(7), passwdLosFail(8), unknown(255)} | read-only | current |
| sleGponOnuVlanID OBJECT-TYPE The ont's vlan id. | 1.3.6.1.4.1.6296.101.23.3.1.1.25 | INTEGER (1..65535) | read-only | current |
| sleGponOnuIpAddress OBJECT-TYPE The ont's ip address. | 1.3.6.1.4.1.6296.101.23.3.1.1.26 | IpAddress | read-only | current |
| sleGponOnuNetmask OBJECT-TYPE The ont's netmask. | 1.3.6.1.4.1.6296.101.23.3.1.1.27 | IpAddress | read-only | current |
| sleGponOnuHWType OBJECT-TYPE The ont's HW type. | 1.3.6.1.4.1.6296.101.23.3.1.1.28 | INTEGER (1..65535) | read-only | current |
| sleGponOnuRegistrationCnt OBJECT-TYPE The times of registration. | 1.3.6.1.4.1.6296.101.23.3.1.1.29 | Integer32 | read-only | current |
| sleGponOnuAuthAcceptedCnt OBJECT-TYPE The times of acception. | 1.3.6.1.4.1.6296.101.23.3.1.1.30 | Integer32 | read-only | current |
| sleGponOnuAuthRejectedCnt OBJECT-TYPE The times of rejection. | 1.3.6.1.4.1.6296.101.23.3.1.1.31 | Integer32 | read-only | current |
| sleGponOnuAuthChallengedCnt OBJECT-TYPE The times of challenge. | 1.3.6.1.4.1.6296.101.23.3.1.1.32 | Integer32 | read-only | current |
| sleGponOnuFecModeUS OBJECT-TYPE UpStream FEC mode | 1.3.6.1.4.1.6296.101.23.3.1.1.33 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleGponOnuIPMode OBJECT-TYPE Ip Addressing mode DHCP or Manual (UnUsed) | 1.3.6.1.4.1.6296.101.23.3.1.1.34 | INTEGER {dhcp(1), manual(2)} | read-only | current |
| sleGponOnuIPAddr OBJECT-TYPE Onu IP address(UnUsed) | 1.3.6.1.4.1.6296.101.23.3.1.1.35 | IpAddress | read-only | current |
| sleGponOnuIPMask OBJECT-TYPE Onu IP Netmask(UnUsed) | 1.3.6.1.4.1.6296.101.23.3.1.1.36 | IpAddress | read-only | current |
| sleGponOnuIPGw OBJECT-TYPE Onu Gateway(UnUsed) | 1.3.6.1.4.1.6296.101.23.3.1.1.37 | IpAddress | read-only | current |
| sleGponOnuIPDns1 OBJECT-TYPE Onu DNS primary(UnUsed) | 1.3.6.1.4.1.6296.101.23.3.1.1.38 | IpAddress | read-only | current |
| sleGponOnuIPDns2 OBJECT-TYPE Onu DNS secondary(Unused) | 1.3.6.1.4.1.6296.101.23.3.1.1.39 | IpAddress | read-only | current |
| sleGponOnuBatteryStatus OBJECT-TYPE Onu battery status. | 1.3.6.1.4.1.6296.101.23.3.1.1.40 | INTEGER {powering(1), missing(2), failure(3), low(4)} | read-only | current |
| sleGponOnuMgmtSerialNo OBJECT-TYPE The ONU management serial number | 1.3.6.1.4.1.6296.101.23.3.1.1.41 | OCTET STRING | read-only | current |
| sleGponOnuUserMacCnt OBJECT-TYPE The count of MAC addresses that are leant at the running ONU. | 1.3.6.1.4.1.6296.101.23.3.1.1.42 | Integer32 | read-only | current |
| sleGponOnuOmciPingTestResult OBJECT-TYPE OMCI ping test result. Result Format : Sent Packets/Received Packets/Lost Packets | 1.3.6.1.4.1.6296.101.23.3.1.1.43 | OCTET STRING | read-only | current |
| sleGponOnuOmciPingTestResultAvg OBJECT-TYPE OMCI ping test result average. Result Average Format : minimum/maximum/averge | 1.3.6.1.4.1.6296.101.23.3.1.1.44 | OCTET STRING | read-only | current |
| sleGponOnuDeactiveReason OBJECT-TYPE Onu inactive reason. | 1.3.6.1.4.1.6296.101.23.3.1.1.45 | INTEGER {none(1), dgi(2), losi(3), lofi(4), sfi(5), sufi(6), loai(7), loami(8), loki(9), adminReset(10), adminActiveChange(11), adminOltConfiguration(12), adminSlotRestart(13), adminSlotRemove(14), adminRogueOnuCandidate(15), adminRogueOnu(16), adminRogueOnuSelfDetectBlock(17), adminTxOffOptic(18), adminDeactivate(19), adminOltDeactivate(20), adminOmccDown(21), adminSetRedundancy(22), adminRemoveOnu(23), adminServiceMode(24), adminManualPowerOff(25), los(100), onuDeactReasonRanging(101), onuDeactReasonPasswdAuthentication(102), onuDeactReasonPasswdInconsistency(103), onuDeactReasonPasswdMismatch(104), onuDeactReasonPasswdTimeout(105), onuDeactReasonPasswdOnuAlarm(106), onuDeactReasonPasswdDisableEvent(107), unknown(255)} | read-only | current |
| sleGponOnuControlPathIpAddr OBJECT-TYPE IP Address for ONU Control plane | 1.3.6.1.4.1.6296.101.23.3.1.1.46 | IpAddress | read-only | current |
| sleGponOnuControlPathMacAddr OBJECT-TYPE MAC Address for ONU Control plane | 1.3.6.1.4.1.6296.101.23.3.1.1.47 | OCTET STRING | read-only | current |
| sleGponOnuControlPathStatus OBJECT-TYPE The status about ONU's control path. | 1.3.6.1.4.1.6296.101.23.3.1.1.48 | Integer32 | read-only | current |
| sleGponOnuControlPathUptime OBJECT-TYPE The elapsed time that control path has been connect. | 1.3.6.1.4.1.6296.101.23.3.1.1.49 | TimeTicks | read-only | current |
| sleGponOnuPMProfile OBJECT-TYPE The assigned PM-profile | 1.3.6.1.4.1.6296.101.23.3.1.1.50 | OCTET STRING | read-only | current |
| sleGponOnuUpCount OBJECT-TYPE The link up count | 1.3.6.1.4.1.6296.101.23.3.1.1.51 | Integer32 | read-only | current |
| sleGponOnuDownCount OBJECT-TYPE The link up count | 1.3.6.1.4.1.6296.101.23.3.1.1.52 | Integer32 | read-only | current |
| sleGponOnuNosDefaultPartition OBJECT-TYPE The default NOS partition. | 1.3.6.1.4.1.6296.101.23.3.1.1.53 | INTEGER {os1(1), os2(2), unknown(255)} | read-only | current |
| sleGponOnuNosActivePartition OBJECT-TYPE The current active NOS partition.. | 1.3.6.1.4.1.6296.101.23.3.1.1.54 | INTEGER {os1(1), os2(2), unknown(255)} | read-only | current |
| sleGponOnuBlockStatus OBJECT-TYPE The ONU block status. | 1.3.6.1.4.1.6296.101.23.3.1.1.55 | INTEGER {autoblock(1), manualblock(2), unblock(255)} | read-only | current |
| sleGponOnuBlockReason OBJECT-TYPE The ONU Block reason. | 1.3.6.1.4.1.6296.101.23.3.1.1.56 | INTEGER {mnanualblock(1), sourcemac(2), movemac(3), none(255)} | read-only | current |
| sleGponOnuLastActiveFailReason OBJECT-TYPE The ONU Last active fail Reason. | 1.3.6.1.4.1.6296.101.23.3.1.1.57 | INTEGER {ranging(1), passwdInconsistency(2), passwdMismatch(3), passwdTimeout(4), passwdONUAlarm(5), passwdDisableEvent(6), passwdLosl(7), unknown(255)} | read-only | current |
| sleGponOnuEqD OBJECT-TYPE The ONU EqD. | 1.3.6.1.4.1.6296.101.23.3.1.1.58 | INTEGER (1..65535) | read-only | current |
| sleGponOnuMaxTcont OBJECT-TYPE The ONU Max tcont | 1.3.6.1.4.1.6296.101.23.3.1.1.59 | INTEGER (1..65535) | read-only | current |
| sleGponOnuMaxUsQueuePerTcont OBJECT-TYPE The ONU Max US queue per Tcont | 1.3.6.1.4.1.6296.101.23.3.1.1.60 | INTEGER (1..65535) | read-only | current |
| sleGponOnuSysUpTime OBJECT-TYPE The ONU sysUptime | 1.3.6.1.4.1.6296.101.23.3.1.1.61 | Counter64 | read-only | current |
| sleGponOnuVenderProduct OBJECT-TYPE The ONU Vendor | 1.3.6.1.4.1.6296.101.23.3.1.1.62 | INTEGER (1..65535) | read-only | current |
| sleGponOnuSlotId OBJECT-TYPE The ONU slotId | 1.3.6.1.4.1.6296.101.23.3.1.1.63 | INTEGER (1..65535) | read-only | current |
| sleGponOnuPortsID OBJECT-TYPE The ONU Port ID | 1.3.6.1.4.1.6296.101.23.3.1.1.64 | INTEGER (1..65535) | read-only | current |
| sleGponOnuOperStatus OBJECT-TYPE The ONU Oper status | 1.3.6.1.4.1.6296.101.23.3.1.1.65 | Integer32 | read-only | current |
| sleGponOnuMapperID OBJECT-TYPE The ONU MapperID | 1.3.6.1.4.1.6296.101.23.3.1.1.66 | Integer32 | read-only | current |
| sleGponOnuVoipAvailSignalProtocol OBJECT-TYPE The Signal protocol | 1.3.6.1.4.1.6296.101.23.3.1.1.67 | Bits {sip(0), h248(1), mgcp(2)} | read-only | current |
| sleGponOnuVoipAvailConfigMethod OBJECT-TYPE The Configuration method | 1.3.6.1.4.1.6296.101.23.3.1.1.68 | Bits {omci(0), configrationFile(1), tr69(2), ietf(3)} | read-only | current |
| sleGponOnuSupplierSerial OBJECT-TYPE The supplier serial. | 1.3.6.1.4.1.6296.101.23.3.1.1.69 | OCTET STRING | read-only | current |
| sleGponOnuHWRevision OBJECT-TYPE The H/W revision. | 1.3.6.1.4.1.6296.101.23.3.1.1.70 | OCTET STRING | read-only | current |
| sleGponOnuCPULoad OBJECT-TYPE The cpu load (%). | 1.3.6.1.4.1.6296.101.23.3.1.1.71 | INTEGER (1..65535) | read-only | current |
| sleGponOnuCPULoadThreshold OBJECT-TYPE The CPU load threshold(%). | 1.3.6.1.4.1.6296.101.23.3.1.1.72 | INTEGER (1..65535) | read-only | current |
| sleGponOnuMemoryUsage OBJECT-TYPE The memory usage(%). | 1.3.6.1.4.1.6296.101.23.3.1.1.73 | INTEGER (1..65535) | read-only | current |
| sleGponOnuMemoryThreshold OBJECT-TYPE The memory threshold(%). | 1.3.6.1.4.1.6296.101.23.3.1.1.74 | INTEGER (1..65535) | read-only | current |
| sleGponOnuTemperature OBJECT-TYPE The temperature(C). | 1.3.6.1.4.1.6296.101.23.3.1.1.75 | INTEGER (1..65535) | read-only | current |
| sleGponOnuTemperatureHighThreshold OBJECT-TYPE The temperature high threshold(C). | 1.3.6.1.4.1.6296.101.23.3.1.1.76 | INTEGER (1..65535) | read-only | current |
| sleGponOnuTemperatureLowThreshold OBJECT-TYPE The temperature low threshold(C). | 1.3.6.1.4.1.6296.101.23.3.1.1.77 | INTEGER (1..65535) | read-write | current |
| sleGponOnuLoopDetectStateSupport OBJECT-TYPE The supported state. | 1.3.6.1.4.1.6296.101.23.3.1.1.78 | INTEGER {unSupported(0), supported(1)} | read-only | current |
| sleGponOnuLoopDetectStateDetect OBJECT-TYPE The detect state. | 1.3.6.1.4.1.6296.101.23.3.1.1.79 | INTEGER {unDetected(0), detected(1)} | read-only | current |
| sleGponOnuLoopDetectStateBlock OBJECT-TYPE The block state. | 1.3.6.1.4.1.6296.101.23.3.1.1.80 | INTEGER {unBlocked(0), blocked(1)} | read-only | current |
| sleGponOnuLoopDetectUnblockReason OBJECT-TYPE The unblock reason. 0: Unblock by init 1: Unblock by command 2: Unblock by timer expire 3: Unblock by disable 255: Unknown | 1.3.6.1.4.1.6296.101.23.3.1.1.81 | INTEGER {unBlockByInit(0), unBlockByCommand(1), unBlockByTimerExpire(2), unBlockByDisable(3), unknown(255)} | read-only | current |
| sleGponOnuSupportFunction OBJECT-TYPE The support function. | 1.3.6.1.4.1.6296.101.23.3.1.1.82 | Bits {systemStatus(0)} | read-only | current |
| sleGponOnuAccountUserName OBJECT-TYPE The account user name. | 1.3.6.1.4.1.6296.101.23.3.1.1.83 | OCTET STRING | read-only | current |
| sleGponOnuAccountPassword OBJECT-TYPE The account password. | 1.3.6.1.4.1.6296.101.23.3.1.1.84 | OCTET STRING | read-only | current |
| sleGponOnuInactiveTime OBJECT-TYPE The elapsed time after ont Inactive. | 1.3.6.1.4.1.6296.101.23.3.1.1.85 | Counter64 | read-only | current |
| sleGponOnuRadiusAuthStatus OBJECT-TYPE The Onu Authentication Status | 1.3.6.1.4.1.6296.101.23.3.1.1.86 | INTEGER {none(0), try(1), success(2), noOnuProfile(3), fail(4), unknown(255)} | read-only | current |
| sleGponOnuRadiusAuthReceiveProfile OBJECT-TYPE Onu received profile form authentication server | 1.3.6.1.4.1.6296.101.23.3.1.1.87 | OCTET STRING | read-only | current |
| sleGponOnuMgmtIpPathProtocol OBJECT-TYPE The Ip-path management protocol | 1.3.6.1.4.1.6296.101.23.3.1.1.88 | INTEGER {ftp(1), tftp(2)} | read-only | current |
| sleGponOnuMgmtIpPathId OBJECT-TYPE The Ip-path management access ID | 1.3.6.1.4.1.6296.101.23.3.1.1.89 | OCTET STRING | read-only | current |
| sleGponOnuMgmtIpPathPassword OBJECT-TYPE The Ip-path management access password | 1.3.6.1.4.1.6296.101.23.3.1.1.90 | OCTET STRING | read-only | current |
| sleGponOnuMgmtIpPathUrl OBJECT-TYPE The Ip-path management URL | 1.3.6.1.4.1.6296.101.23.3.1.1.91 | OCTET STRING | read-only | current |
| sleGponOnuMgmtIpPathFileName OBJECT-TYPE The Ip-path management File name | 1.3.6.1.4.1.6296.101.23.3.1.1.92 | OCTET STRING | read-only | current |
| sleGponOnuMgmtIpPathState OBJECT-TYPE The Ip-path management State 0:File transfer completed successfully 1:File transfer aborted successfully 2:File deleted 3:URL undefined or unreachable 4:Failure to authenticate 5:File transfer in progress 6:Remote failure 7:Local failure 255: Unknown | 1.3.6.1.4.1.6296.101.23.3.1.1.93 | INTEGER | read-only | current |
| sleGponOnuServiceMode OBJECT-TYPE ONU Service Mode 0:None 1:HGU (Home Gateway Unit) 2:SFU (Single Family Unit) | 1.3.6.1.4.1.6296.101.23.3.1.1.94 | INTEGER {none(0), hgu(1), sfu(2)} | read-only | current |
| sleGponOnuServiceStatus OBJECT-TYPE ONU Service Status INTEGER 0:Not Support 1:HGU (Home Gateway Unit) 2:SFU (Single Family Unit) | 1.3.6.1.4.1.6296.101.23.3.1.1.95 | INTEGER {notSupport(0), hgu(1), sfu(2)} | read-only | current |
| sleGponOnuAutoUpgradeMode OBJECT-TYPE ONU Auto Upgrade enable / disable | 1.3.6.1.4.1.6296.101.23.3.1.1.96 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleGponOnuBootReason OBJECT-TYPE ONU Boot Reason | 1.3.6.1.4.1.6296.101.23.3.1.1.97 | INTEGER {newLabel(1), powerRebootByLocal(2), swReboot(3), swRebootByLocal(4), swRebootByOlt(5), swRebootByOnuApplication(6), swRebootByActiveImageChange(7), swRebootByTcont(8), swRebootByPanic(9), watchdog(10), watchdogByLocal(11), swWatchdog(12), swWatchdogByCpuOver(13), swWatchdogByMemLow(14), autoProvision(15), applyWebConfig(16), webSystemReboot(17), adminPortChange(18), factoryRestore(19), userFactoryRestore(20), wifiOnOffChange(21), unknown(255)} | read-only | current |
| sleGponOnuAlarmStatus OBJECT-TYPE ONU Alarm Status | 1.3.6.1.4.1.6296.101.23.3.1.1.98 | Bits {losi(0), lofi(1), loami(2), lcdgi(3), rdii(4), sufi(5), loai(6), dgi(7), dfi(8), dowi(9), tiwi(10), sfii(11), loki(12), equipment(13), alarmPowering(14), batteryMissing(15), batteryFailure(16), batteryLow(17), physicalIntrusion(18), selfTestFailure(19), dyingGasp(20), temperatureYellow(21), temperatureRed(22), voltageYellow(23), voltageRed(24), highCpuLoad(25), memoryUsage(26), lowTemperature(27), highTemperature(28), aniSf(29), aniSd(30), lowThresholdRxOpticPower(31), highThresholdRxOpticPower(32), lowThresholdTxOpticPower(33), highThresholdTxOpticPower(34), lowThresholdOpticVoltage(35), highThresholdOpticVoltage(36), lowThresholdOpticTemperature(37), highThresholdOpticTemperature(38), lowThresholdOpticBias(39), highThresholdOpticBias(40), manualPowerOff(41)} | read-only | current |
| sleGponOnuAuthOnuProfile OBJECT-TYPE The ONU Profile in RADIUS attribute structure | 1.3.6.1.4.1.6296.101.23.3.1.1.99 | OCTET STRING | read-only | current |
| sleGponOnuAuthOnuVlan4 OBJECT-TYPE The vlan id for IPv4 in RADIUS attribute structure | 1.3.6.1.4.1.6296.101.23.3.1.1.100 | Integer32 (2101..3636) | read-only | current |
| sleGponOnuAuthOnuVlan6 OBJECT-TYPE The vlan id for IPv6 in RADIUS attribute structure | 1.3.6.1.4.1.6296.101.23.3.1.1.101 | Integer32 (101..1636) | read-only | current |
| sleGponOnuAuthOnuIpv4 OBJECT-TYPE The IPv4 address with subnet mask in RADIUS attribute structure | 1.3.6.1.4.1.6296.101.23.3.1.1.102 | OCTET STRING | read-only | current |
| sleGponOnuAuthOnuIpv6 OBJECT-TYPE The IPv6 address with subnet mask in RADIUS attribute structure | 1.3.6.1.4.1.6296.101.23.3.1.1.103 | OCTET STRING | read-only | current |
| sleGponOnuAuthOnuUniPortAdmin OBJECT-TYPE A=Port1, B=Port2, C=Port3, D=Port4, E=Port5(POTS) 0: Not used 1: UNI UP 2: UNI DOWN | 1.3.6.1.4.1.6296.101.23.3.1.1.104 | Integer32 (0..22222) | read-only | current |
| sleGponOnuAuthOnuUniEthMedium OBJECT-TYPE A=Port1, B=Port2, C=Port3, D=Port4 0: Not used 1: Auto 2: MDI-X 3: MDI | 1.3.6.1.4.1.6296.101.23.3.1.1.105 | Integer32 (0..3333) | read-only | current |
| sleGponOnuAuthOnuUniEthSpeed OBJECT-TYPE A=Port1, B=Port2, C=Port3, D=Port4 0: Not used 1: Auto 2: 10 3: 100 4: 1000 5: 10000 | 1.3.6.1.4.1.6296.101.23.3.1.1.106 | Integer32 (0..5555) | read-only | current |
| sleGponOnuAuthOnuUniEthDuplex OBJECT-TYPE A=Port1, B=Port2, C=Port3, D=Port4 0: Not used 1: Auto 2: Half 3: Full | 1.3.6.1.4.1.6296.101.23.3.1.1.107 | Integer32 (0..3333) | read-only | current |
| sleGponOnuAuthOnuErrorReason OBJECT-TYPE GPON_ERROR_RAD_ATTR_UNKNOWN(100): Unknown Attribute GPON_ERROR_RAD_ATTR_INVALID(101): Invalid Attributes GOPN_ERROR_RAD_ATTR_FAIL(102): Fail to apply attribute GOPN_ERROR_RAD_ATTR_VENDOR_INVALID(103): Unknown vendor id GOPN_ERROR_RAD_ATTR_LEN(104): Negative or overflow length GPON_ERROR_RAD_ATTR_PRF_LEN(105):Length of profile name is over GPON_ERROR_RAD_ATTR_PRF_NO(106): There is no profile GPON_ERROR_RAD_ATTR_PRF_FAIL(107): Fail to apply profile GPON_ERROR_RAD_ATTR_PRF_DB(108): Fail to set DB for profile GPON_ERROR_RAD_ATTR_PRF_RM_INACT(109): Cannot remove a profile for inactive ONU GPON_ERROR_RAD_ATTR_PRF_RM_NO(110): There is no profile to remove GPON_ERROR_RAD_ATTR_PRF_RM_FAIL(111): Fail to remove a profile GPON_ERROR_RAD_ATTR_IPV4_SIZE(112): Size of IPv4 is not 32bit GPON_ERROR_RAD_ATTR_SUBNET_SIZE(113): Size of IPv4 subnet is not 32bit GPON_ERROR_RAD_ATTR_IPV6_SIZE(114): Size of IPv6 is not 18 bit GPON_ERROR_RAD_ATTR_VLAN6_SIZE(115): Size of VID for IPv6 is not integer GPON_ERROR_RAD_ATTR_VLAN4_SIZE(116): Size of VID for IPv4 is not integer GPON_ERROR_RAD_ATTR_ONU_ID_LEN(117): Size of IPv6 is not integer GPON_ERROR_RAD_ATTR_ONU_ID_FAIL(118): Fail to call gpon_retry_wrap_add() GPON_ERROR_RAD_ATTR_ADMIN_SIZE(119): Size of UNI port admin is not integer GPON_ERROR_RAD_ATTR_ADMIN_INVALID(120): Invalid or undefined value on UNI admin GPON_ERROR_RAD_ATTR_ADMIN_FAIL(121): Fail to configure UNI admin GPON_ERROR_RAD_ATTR_ADMIN_DB(122): Fail to set DB for UNI admin GPON_ERROR_RAD_ATTR_MEDIUM_SIZE(123): Size of ethernet medium is not integer GPON_ERROR_RAD_ATTR_MEDIUM_INVALID(124):Invalid or undefined value on medium GPON_ERROR_RAD_ATTR_MEDIUM_FAIL(125): Fail to configure medium control GPON_ERROR_RAD_ATTR_MEDIUM_DB(126): Fail to set DB for medium control GPON_ERROR_RAD_ATTR_SPEED_SIZE(127): Size of ethernet speed is not integer GPON_ERROR_RAD_ATTR_SPEED_INVALID(128): Invalid or undefined value on speed GPON_ERROR_RAD_ATTR_SPEED_DB(129): Fail to set DB for speed control GPON_ERROR_RAD_ATTR_DUPLEX_SIZE(130): Size of ethernet duplex is not integer GPON_ERROR_RAD_ATTR_DUPLEX_INVALID(131): Invalid or undefined value on duplex GPON_ERROR_RAD_ATTR_DUPLEX_DB(132): fail to set DB for duplex control GPON_ERROR_RAD_ATTR_AUTO_FAIL(133): Fail to configure speed and/or duplex GPON_ERROR_RAD_DB_SET_ATTR_FAIL(300): Cannot archive attributes GPON_ERROR_RAD_DB_GET_ONU_FAIL(301): Cannot get ONU DB GPON_ERROR_RAD_NO_PARSER(302): Unknown attribute GPON_ERROR_RAD_A_VLAN_BASE(400): N/A GPON_ERROR_RAD_A_VLAN_PORT(401): Cannot found port for ambiguous VLAN GPON_ERROR_RAD_A_VLAN_VLAN(402): Invalid VID of VLAN GPON_ERROR_RAD_A_VLAN_FAIL(403): Fail to confiugure extended VLAN GPON_ERROR_RAD_A_VLAN_INTF_FAIL(404): Fail to create ambiguous VLAN interface GPON_ERROR_RAD_A_VLAN_MEM_FAIL(405): Fail to create VLAN DB GPON_ERROR_RAD_A_VLAN_DB_DUP(406): Duplcated VID of VLAN GPON_ERROR_RAD_A_VLAN_PREFIX(407): Invalid length of prefix GPON_ERROR_RAD_A_VLAN_NO(408): Cannot found ambiguous VLAN interface GPON_ERROR_EXT_VLAN6_FAIL(500): Fail to confiugure extended VLAN for IPv6 GPON_ERROR_EXT_VLAN4_FAIL(501): Fail to confiugure extended VLAN for IPv4 | 1.3.6.1.4.1.6296.101.23.3.1.1.108 | INTEGER {errorRadAttrUnknown(100), errorRadAttrInvalid(101), errorRadAttrFail(102), errorRadAttrVendorInvalid(103), errorRadAttrLen(104), errorRadAttrPrfLen(105), errorRadAttrPrfNo(106), errorRadAttrPrfFail(107), errorRadAttrPrfDb(108), errorRadAttrPrfRmInact(109), errorRadAttrPrfRmNo(110), errorRadAttrPrfRmFail(111), errorRadAttrIpv4Size(112), errorRadAttrSubnetSize(113), errorRadAttrIpv6Size(114), errorRadAttrVlan6Size(115), errorRadAttrVlan4Size(116), errorRadAttrOnuIdLen(117), errorRadAttrOnuIdFail(118), errorRadAttrAdminSize(119), errorRadAttrAdminInvalid(120), errorRadAttrAdminFail(121), errorRadAttrAdminDb(122), errorRadAttrMediumSize(123), errorRadAttrMediumInvalid(124), errorRadAttrMediumFail(125), errorRadAttrMediumDb(126), errorRadAttrSpeedSize(127), errorRadAttrSpeedInvalid(128), errorRadAerrorRadAttrSpeedDbttrSpeedInvalid(129), errorRadAttrDuplexSize(130), errorRadAttrDuplexInvalid(131), errorRadAttrDuplexDb(132), errorRadAttrAutoFail(133), errorRadDbSetAttrFail(300), errorRadDbGetOnuFail(301), errorRadNoParser(302), errorRadAVlanBase(400), errorRadAVlanPort(401), errorRadAVlanVlan(402), errorRadAVlanFail(403), errorRadAVlanIntfFail(404), errorRadAVlanMemFail(405), errorRadAVlanDbDup(406), errorRadAVlanPrefix(407), errorRadAVlanNo(408), errorExtVlan6Fail(500), errorExtVlan4Fail(501)} | read-only | current |
| sleGponOnuAuthOnuOmccVersion OBJECT-TYPE ONU Omcc Version | 1.3.6.1.4.1.6296.101.23.3.1.1.109 | Integer32 | read-only | current |
| sleGponOnuGspStstusUptime OBJECT-TYPE GSP ststus uptime | 1.3.6.1.4.1.6296.101.23.3.1.1.110 | TimeTicks | read-only | current |
| sleGponOnuGspConfigUptime OBJECT-TYPE GSP config uptime | 1.3.6.1.4.1.6296.101.23.3.1.1.111 | TimeTicks | read-only | current |
| sleGponOnuControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.3.2 | |||
| sleGponOnuControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.3.2.1 | INTEGER {setOnuRegister(1), setOnuDeregister(2), setOnuProfile(3), setOnuFix(4), setOnuUpgradeNos(5), setOnuNosActiveChange(6), setOnuEncMode(7), setOnuReset(8), setOnuTxOffOptic(9), setOnuDescription(10), setOnuFecModeUS(11), setOnuIpInfo(12), setOnuOmciPingTest(13), setOnuActiveStatus(14), setOnuPMProfile(15), setOnuUpgradeNosPartition(16), setOnuUpgradeNosCommit(17), setOnuUpgradeNosActiveChange(18), setOnuBlock(19), updateOltRxPower(20), updateOnuSystemInfo(21), setOnuTxOnOptic(22), setOnuLoopDetectUnblock(23), updateOnuUserMacCnt(24), updateOnuAccount(25), setOnuAccount(26), removeOnuSerialNumber(27), setOnuMgmtIpPathProtocol(28), setOnuMgmtIpPathInfo(29), clearOnuMgmtIpPath(30), setOnuServiceMode(31), clearOnuServiceMode(32), setOnuAutoUpgradeMode(33), setOnuMibUpload(34), setOnuReconfig(35), setOnuRestoreFactoryReset(36), setOnuMove(37), setOnuAuthReauthSpecific(38), setOnuRadiusAttribute(39), setOnuPloamReset(40)} | read-write | current |
| sleGponOnuControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.3.2.2 | SleControlStatusType | read-only | current |
| sleGponOnuControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.3.2.3 | Gauge32 | read-write | current |
| sleGponOnuControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.3.2.4 | TimeTicks | read-only | current |
| sleGponOnuControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.3.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOnuControlOltId OBJECT-TYPE Gpon Olt Index | 1.3.6.1.4.1.6296.101.23.3.2.6 | INTEGER (1..2147483647) | read-write | current |
| sleGponOnuControlId OBJECT-TYPE Gpon Onu Index. (0xFF is all onu) | 1.3.6.1.4.1.6296.101.23.3.2.7 | INTEGER (1..65535) | read-write | current |
| sleGponOnuControlSerial OBJECT-TYPE ONU Serial Number | 1.3.6.1.4.1.6296.101.23.3.2.8 | OCTET STRING | read-write | current |
| sleGponOnuControlPasswd OBJECT-TYPE ONU Password | 1.3.6.1.4.1.6296.101.23.3.2.9 | OCTET STRING | read-write | current |
| sleGponOnuControlPasswdMode OBJECT-TYPE Password auto-learning | 1.3.6.1.4.1.6296.101.23.3.2.10 | INTEGER {enable(1), disable(2)} | read-write | current |
| sleGponOnuControlEncMode OBJECT-TYPE Encryption mode | 1.3.6.1.4.1.6296.101.23.3.2.11 | INTEGER {enable(1), disable(2)} | read-write | current |
| sleGponOnuControlProfile OBJECT-TYPE Onu assigned Profile | 1.3.6.1.4.1.6296.101.23.3.2.12 | OCTET STRING | read-write | current |
| sleGponOnuControlNosUpgradePath OBJECT-TYPE Onu Firmware Path. | 1.3.6.1.4.1.6296.101.23.3.2.13 | OCTET STRING | read-write | current |
| sleGponOnuControlHwAddr OBJECT-TYPE Onu H/W address. (0 is unused) | 1.3.6.1.4.1.6296.101.23.3.2.14 | OCTET STRING | read-write | current |
| sleGponOnuControlTxOffOptic OBJECT-TYPE Tx power disable of the tranceiver | 1.3.6.1.4.1.6296.101.23.3.2.15 | INTEGER (0..65525) | read-write | current |
| sleGponOnuControlDescription OBJECT-TYPE ONU description. | 1.3.6.1.4.1.6296.101.23.3.2.16 | OCTET STRING | read-write | current |
| sleGponOnuControlFecModeUS OBJECT-TYPE UpStream FEC mode | 1.3.6.1.4.1.6296.101.23.3.2.17 | INTEGER {enable(1), disable(2)} | read-write | current |
| sleGponOnuControlIPMode OBJECT-TYPE Ip Addressing mode DHCP or Manual | 1.3.6.1.4.1.6296.101.23.3.2.18 | INTEGER {dhcp(1), manual(2)} | read-write | current |
| sleGponOnuControlIPAddr OBJECT-TYPE Onu IP address | 1.3.6.1.4.1.6296.101.23.3.2.19 | IpAddress | read-write | current |
| sleGponOnuControlIPMask OBJECT-TYPE Onu IP Netmask | 1.3.6.1.4.1.6296.101.23.3.2.20 | IpAddress | read-write | current |
| sleGponOnuControlIPGw OBJECT-TYPE Onu Gateway | 1.3.6.1.4.1.6296.101.23.3.2.21 | IpAddress | read-write | current |
| sleGponOnuControlIPDns1 OBJECT-TYPE Onu DNS primary | 1.3.6.1.4.1.6296.101.23.3.2.22 | IpAddress | read-write | current |
| sleGponOnuControlIPDns2 OBJECT-TYPE Onu DNS secondary | 1.3.6.1.4.1.6296.101.23.3.2.23 | IpAddress | read-write | current |
| sleGponOnuControlOmciPingTestTimeout OBJECT-TYPE OMCI ping test timeout. <1-1000> (msec) | 1.3.6.1.4.1.6296.101.23.3.2.24 | Integer32 (1..1000) | read-write | current |
| sleGponOnuControlActiveStatus OBJECT-TYPE ONU activation/deactivation. | 1.3.6.1.4.1.6296.101.23.3.2.25 | INTEGER {activate(1), deactivate(2)} | read-write | current |
| sleGponOnuControlPMProfile OBJECT-TYPE The assigned PM-profile | 1.3.6.1.4.1.6296.101.23.3.2.26 | OCTET STRING | read-write | current |
| sleGponOnuControlNosPartition OBJECT-TYPE The partition of ONU OS. | 1.3.6.1.4.1.6296.101.23.3.2.27 | INTEGER {os1(1), os2(2), unknown(255)} | read-write | current |
| sleGponOnuControlBlock OBJECT-TYPE The Onu Block status. | 1.3.6.1.4.1.6296.101.23.3.2.28 | INTEGER {block(1), unblock(2)} | read-write | current |
| sleGponOnuControlAccountUserName OBJECT-TYPE The account user name. | 1.3.6.1.4.1.6296.101.23.3.2.29 | OCTET STRING | read-write | current |
| sleGponOnuControlAccountPassword OBJECT-TYPE The account password. | 1.3.6.1.4.1.6296.101.23.3.2.30 | OCTET STRING | read-write | current |
| sleGponOnuControlMgmtIpPathProtocol OBJECT-TYPE The Ip-path management protocol | 1.3.6.1.4.1.6296.101.23.3.2.31 | INTEGER {ftp(1), tftp(2)} | read-write | current |
| sleGponOnuControlMgmtIpPathId OBJECT-TYPE The Ip-path management access ID | 1.3.6.1.4.1.6296.101.23.3.2.32 | OCTET STRING | read-write | current |
| sleGponOnuControlMgmtIpPathPassword OBJECT-TYPE The Ip-path management access password | 1.3.6.1.4.1.6296.101.23.3.2.33 | OCTET STRING | read-write | current |
| sleGponOnuControlMgmtIpPathUrl OBJECT-TYPE The Ip-path management URL | 1.3.6.1.4.1.6296.101.23.3.2.34 | OCTET STRING | read-write | current |
| sleGponOnuControlMgmtIpPathFilename OBJECT-TYPE The Ip-path management File name | 1.3.6.1.4.1.6296.101.23.3.2.35 | OCTET STRING | read-write | current |
| sleGponOnuControlServiceMode OBJECT-TYPE ONU Service Mode 1:HGU (Home Gateway Unit) 2:SFU (Single Family Unit) | 1.3.6.1.4.1.6296.101.23.3.2.36 | INTEGER {hgu(1), sfu(2)} | read-write | current |
| sleGponOnuControlAutoUpgradeMode OBJECT-TYPE ONU Auto Upgrade enable/disable | 1.3.6.1.4.1.6296.101.23.3.2.37 | INTEGER {enable(1), disable(2)} | read-write | current |
| sleGponOnuControlMoveOltId OBJECT-TYPE Move to Gpon Olt Index | 1.3.6.1.4.1.6296.101.23.3.2.38 | Integer32 (1..2147483647) | read-write | current |
| sleGponOnuControlMoveOnuId OBJECT-TYPE Move to Gpon Onu Index (OxFF is auto onu) | 1.3.6.1.4.1.6296.101.23.3.2.39 | Integer32 (1..65535) | read-write | current |
| sleGponOnuControlAuthOnuProfile OBJECT-TYPE The ONU Profile in RADIUS attribute structure | 1.3.6.1.4.1.6296.101.23.3.2.40 | OCTET STRING | read-write | current |
| sleGponOnuControlAuthOnuVlan4 OBJECT-TYPE The vlan id for IPv4 in RADIUS attribute structure | 1.3.6.1.4.1.6296.101.23.3.2.41 | Integer32 (2101..3636) | read-write | current |
| sleGponOnuControlAuthOnuVlan6 OBJECT-TYPE The vlan id for IPv6 in RADIUS attribute structure | 1.3.6.1.4.1.6296.101.23.3.2.42 | Integer32 (101..1636) | read-write | current |
| sleGponOnuControlAuthOnuIpv4 OBJECT-TYPE The IPv4 address with subnet mask in RADIUS attribute structure | 1.3.6.1.4.1.6296.101.23.3.2.43 | OCTET STRING | read-write | current |
| sleGponOnuControlAuthOnuIpv6 OBJECT-TYPE The IPv4 address with subnet mask in RADIUS attribute structure | 1.3.6.1.4.1.6296.101.23.3.2.44 | OCTET STRING | read-write | current |
| sleGponOnuControlAuthOnuUniPortAdmin OBJECT-TYPE A=Port1, B=Port2, C=Port3, D=Port4 0: Not used 1: Auto 2: MDI-X 3: MDI | 1.3.6.1.4.1.6296.101.23.3.2.45 | Integer32 (0..22222) | read-write | current |
| sleGponOnuControlAuthOnuUniEthMedium OBJECT-TYPE A=Port1, B=Port2, C=Port3, D=Port4 0: Not used 1: Auto 2: MDI-X 3: MDI | 1.3.6.1.4.1.6296.101.23.3.2.46 | Integer32 (0..3333) | read-write | current |
| sleGponOnuControlAuthOnuUniEthSpeed OBJECT-TYPE A=Port1, B=Port2, C=Port3, D=Port4 0: Not used 1: Auto 2: 10 3: 100 4: 1000 5: 10000 | 1.3.6.1.4.1.6296.101.23.3.2.47 | Integer32 (0..5555) | read-write | current |
| sleGponOnuControlAuthOnuUniEthDuplex OBJECT-TYPE A=Port1, B=Port2, C=Port3, D=Port4 0: Not used 1: Auto 2: Half 3: Full | 1.3.6.1.4.1.6296.101.23.3.2.48 | Integer32 (0..3333) | read-write | current |
| sleGponOnuNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.3.3 | |||
| sleGponTcont OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.4 | |||
| sleGponTcontTable OBJECT-TYPE sleGponTcontTable | 1.3.6.1.4.1.6296.101.23.4.1 | not-accessible | current | |
| sleGponTcontEntry OBJECT-TYPE key: sleGponOltId, sleGponTcontId | 1.3.6.1.4.1.6296.101.23.4.1.1 | not-accessible | current | |
| sleGponTcontId OBJECT-TYPE Tcon Id | 1.3.6.1.4.1.6296.101.23.4.1.1.1 | INTEGER (1..512) | read-only | current |
| sleGponTcontOnuId OBJECT-TYPE Tcont assigned ONU Id | 1.3.6.1.4.1.6296.101.23.4.1.1.2 | INTEGER (1..65535) | read-only | current |
| sleGponTcontDBAMode OBJECT-TYPE Status reports received from ONUs | 1.3.6.1.4.1.6296.101.23.4.1.1.3 | INTEGER {nsr(1), sr(2), fixed(3)} | read-only | current |
| sleGponTcontFixedBw OBJECT-TYPE Upstream fixed bandwidth.<128-1031616> | 1.3.6.1.4.1.6296.101.23.4.1.1.4 | INTEGER (1..65535) | read-only | current |
| sleGponTcontAssuredBw OBJECT-TYPE Upstream assured bandwidth.<0-1031616> | 1.3.6.1.4.1.6296.101.23.4.1.1.5 | INTEGER (1..65535) | read-only | current |
| sleGponTcontMaxBw OBJECT-TYPE Upstream max bandwidth.<128-1031616> | 1.3.6.1.4.1.6296.101.23.4.1.1.6 | INTEGER (1..65535) | read-only | current |
| sleGponTcontControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.4.2 | |||
| sleGponTcontControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.4.2.1 | INTEGER {createTcon(1), destroyTcon(2)} | read-write | current |
| sleGponTcontControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.4.2.2 | SleControlStatusType | read-only | current |
| sleGponTcontControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.4.2.3 | Gauge32 | read-write | current |
| sleGponTcontControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.4.2.4 | TimeTicks | read-only | current |
| sleGponTcontControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.4.2.5 | SleControlRequestResultType | read-only | current |
| sleGponTcontControlId OBJECT-TYPE Tcon Id.<256-1023> | 1.3.6.1.4.1.6296.101.23.4.2.6 | INTEGER (1..65535) | read-write | current |
| sleGponTcontControlOltId OBJECT-TYPE Gpon Olt Id | 1.3.6.1.4.1.6296.101.23.4.2.7 | INTEGER (1..2147483647) | read-write | current |
| sleGponTcontControlOnuId OBJECT-TYPE Gpon Onu Id | 1.3.6.1.4.1.6296.101.23.4.2.8 | INTEGER (1..65535) | read-write | current |
| sleGponTcontControlDBAMode OBJECT-TYPE Status reports received from ONUs | 1.3.6.1.4.1.6296.101.23.4.2.9 | INTEGER {nsr(1), sr(2), fixed(3)} | read-write | current |
| sleGponTcontControlFixedBw OBJECT-TYPE Upstream fixed bandwidth.<128-1031616> | 1.3.6.1.4.1.6296.101.23.4.2.10 | INTEGER (1..65535) | read-write | current |
| sleGponTcontControlAssuredBw OBJECT-TYPE Upstream assured bandwidth.<0-1031616> | 1.3.6.1.4.1.6296.101.23.4.2.11 | INTEGER (1..65535) | read-write | current |
| sleGponTcontControlMaxBw OBJECT-TYPE Upstream max bandwidth.<128-1031616> | 1.3.6.1.4.1.6296.101.23.4.2.12 | INTEGER (1..65535) | read-write | current |
| sleGponTcontControlOnuSerial OBJECT-TYPE ONU Serial Number | 1.3.6.1.4.1.6296.101.23.4.2.13 | OCTET STRING | read-write | current |
| sleGponTcontNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.4.3 | |||
| sleGponProfile OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5 | |||
| sleGponProfileBase OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.1 | |||
| sleGponProfileBaseTable OBJECT-TYPE sleGponProfileBaseTable | 1.3.6.1.4.1.6296.101.23.5.1.1 | not-accessible | current | |
| sleGponProfileBaseEntry OBJECT-TYPE key: sleGponProfileId | 1.3.6.1.4.1.6296.101.23.5.1.1.1 | not-accessible | current | |
| sleGponProfileId OBJECT-TYPE Profile Id | 1.3.6.1.4.1.6296.101.23.5.1.1.1.1 | INTEGER (1..512) | read-only | current |
| sleGponProfileName OBJECT-TYPE Profile Name | 1.3.6.1.4.1.6296.101.23.5.1.1.1.2 | OCTET STRING | read-only | current |
| sleGponProfileDscpToPbit OBJECT-TYPE DSCP to P bit marking | 1.3.6.1.4.1.6296.101.23.5.1.1.1.3 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleGponProfileTcontProfileCnt OBJECT-TYPE Assgined Tcont Profile count Indicate how many tcont profile assigned | 1.3.6.1.4.1.6296.101.23.5.1.1.1.4 | INTEGER (1..65535) | read-only | current |
| sleGponProfileTcontProfile OBJECT-TYPE Assigned TconT Profile Map 2bytes indicate TconT Profile Index. # 0001 0003 0004 ..... | 1.3.6.1.4.1.6296.101.23.5.1.1.1.5 | OCTET STRING | read-only | current |
| sleGponProfileVoIPProfileCnt OBJECT-TYPE Assgined VoIP Profile count Indicate how many VoIP profile assigned(UnUsed) | 1.3.6.1.4.1.6296.101.23.5.1.1.1.6 | INTEGER (1..65535) | read-only | current |
| sleGponProfileVoIPProfile OBJECT-TYPE Assigned VoIP Profile Map 2bytes indicate VoIP Profile Index(UnUsed) | 1.3.6.1.4.1.6296.101.23.5.1.1.1.7 | OCTET STRING | read-only | current |
| sleGponProfileBaseControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.1.2 | |||
| sleGponProfileBaseControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.5.1.2.1 | INTEGER {createProfile(1), modifyProfile(2), destroyProfile(3), updateTcontProfile(4), updateVoipProfile(5)} | read-write | current |
| sleGponProfileBaseControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.5.1.2.2 | SleControlStatusType | read-only | current |
| sleGponProfileBaseControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.5.1.2.3 | Gauge32 | read-write | current |
| sleGponProfileBaseControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.5.1.2.4 | TimeTicks | read-only | current |
| sleGponProfileBaseControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.5.1.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfileBaseControlName OBJECT-TYPE Profile Name | 1.3.6.1.4.1.6296.101.23.5.1.2.6 | OCTET STRING | read-write | current |
| sleGponProfileBaseControlDscpToPbit OBJECT-TYPE DSCP to P bit marking | 1.3.6.1.4.1.6296.101.23.5.1.2.7 | INTEGER {enable(1), disable(2)} | read-write | current |
| sleGponProfileControlTcontProfileCnt OBJECT-TYPE Assgined Tcont Profile count | 1.3.6.1.4.1.6296.101.23.5.1.2.8 | INTEGER (1..65535) | read-write | current |
| sleGponProfileControlTcontProfile OBJECT-TYPE Assigned TconT Profile Map | 1.3.6.1.4.1.6296.101.23.5.1.2.9 | OCTET STRING | read-write | current |
| sleGponProfileControlVoipProfileCnt OBJECT-TYPE Assgined VoIP Profile count | 1.3.6.1.4.1.6296.101.23.5.1.2.10 | INTEGER (1..65535) | read-write | current |
| sleGponProfileControlVoipProfile OBJECT-TYPE Assigned VoIP Profile Map | 1.3.6.1.4.1.6296.101.23.5.1.2.11 | OCTET STRING | read-write | current |
| sleGponProfileBaseNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.1.3 | |||
| sleGponProfilePort OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.2 | |||
| sleGponProfilePortTable OBJECT-TYPE sleGponProfilePortTable | 1.3.6.1.4.1.6296.101.23.5.2.1 | not-accessible | current | |
| sleGponProfilePortEntry OBJECT-TYPE key: sleGponProfileId, sleGponProfilePortId | 1.3.6.1.4.1.6296.101.23.5.2.1.1 | not-accessible | current | |
| sleGponProfilePortId OBJECT-TYPE UNI Port number. | 1.3.6.1.4.1.6296.101.23.5.2.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfilePortRateLimit OBJECT-TYPE port through which packets are incoming. Bandwidth in steps of 64Kbps. | 1.3.6.1.4.1.6296.101.23.5.2.1.1.2 | INTEGER (1..65535) | read-only | current |
| sleGponProfilePortMaxHost OBJECT-TYPE Maximum Mac learning number. | 1.3.6.1.4.1.6296.101.23.5.2.1.1.3 | INTEGER (1..65535) | read-only | current |
| sleGponProfilePortVlan OBJECT-TYPE Port VLAN tagging operation. | 1.3.6.1.4.1.6296.101.23.5.2.1.1.4 | INTEGER (1..65535) | read-only | current |
| sleGponProfilePortCosValue OBJECT-TYPE COS Value. | 1.3.6.1.4.1.6296.101.23.5.2.1.1.5 | INTEGER (1..65535) | read-only | current |
| sleGponProfilePortVlanMode OBJECT-TYPE Port VLAN tagging operation mode. | 1.3.6.1.4.1.6296.101.23.5.2.1.1.6 | INTEGER {keep(1), remove(2)} | read-only | current |
| sleGponProfilePortVlanFilter OBJECT-TYPE VLAN tagging filter configuration. | 1.3.6.1.4.1.6296.101.23.5.2.1.1.7 | OCTET STRING | read-only | current |
| sleGponProfilePortAdmin OBJECT-TYPE Port Admin status | 1.3.6.1.4.1.6296.101.23.5.2.1.1.8 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleGponProfilePortDuplex OBJECT-TYPE Port Duplex configuration | 1.3.6.1.4.1.6296.101.23.5.2.1.1.9 | INTEGER {auto(1), full(2), half(3)} | read-only | current |
| sleGponProfilePortSpeed OBJECT-TYPE Port Speed configuration | 1.3.6.1.4.1.6296.101.23.5.2.1.1.10 | INTEGER {auto(1), speed10M(2), speed100M(3), speed1000M(4)} | read-only | current |
| sleGponProfilePortPause OBJECT-TYPE Port Pause-time configuration | 1.3.6.1.4.1.6296.101.23.5.2.1.1.11 | Integer32 | read-only | current |
| sleGponProfilePortControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.2.2 | |||
| sleGponProfilePortControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.5.2.2.1 | INTEGER {setPortRateLimit(1), setPortMaxHost(2), setPortVlanOper(3), setPortVlanFilter(4), setPortAdmin(5), setPortDuplex(6), setPortSpeed(7), setPortPause(8)} | read-write | current |
| sleGponProfilePortControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.5.2.2.2 | SleControlStatusType | read-only | current |
| sleGponProfilePortControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.5.2.2.3 | Gauge32 | read-write | current |
| sleGponProfilePortControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.5.2.2.4 | TimeTicks | read-only | current |
| sleGponProfilePortControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.5.2.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfilePortControlId OBJECT-TYPE Profile Index | 1.3.6.1.4.1.6296.101.23.5.2.2.6 | INTEGER (1..65535) | read-write | current |
| sleGponProfilePortControlPortId OBJECT-TYPE UNI Port number | 1.3.6.1.4.1.6296.101.23.5.2.2.7 | INTEGER (1..65535) | read-write | current |
| sleGponProfilePortControlRateLimit OBJECT-TYPE port through which packets are incoming. Bandwidth in steps of 64Kbps | 1.3.6.1.4.1.6296.101.23.5.2.2.8 | INTEGER (1..65535) | read-write | current |
| sleGponProfilePortControlMaxHost OBJECT-TYPE Maximum Mac learning number | 1.3.6.1.4.1.6296.101.23.5.2.2.9 | INTEGER (1..65535) | read-write | current |
| sleGponProfilePortControlVlan OBJECT-TYPE Port VLAN tagging operation | 1.3.6.1.4.1.6296.101.23.5.2.2.10 | INTEGER (1..65535) | read-write | current |
| sleGponProfilePortControlCosValue OBJECT-TYPE COS Value | 1.3.6.1.4.1.6296.101.23.5.2.2.11 | INTEGER (1..65535) | read-write | current |
| sleGponProfilePortControlVlanMode OBJECT-TYPE Port VLAN tagging operation mode. | 1.3.6.1.4.1.6296.101.23.5.2.2.12 | INTEGER {keep(1), remove(2)} | read-write | current |
| sleGponProfilePortControlVlanFilter OBJECT-TYPE VLAN tagging filter configuration. | 1.3.6.1.4.1.6296.101.23.5.2.2.13 | OCTET STRING | read-write | current |
| sleGponProfilePortControlPortAdmin OBJECT-TYPE Port Admin status | 1.3.6.1.4.1.6296.101.23.5.2.2.14 | INTEGER {enable(1), disable(2)} | read-write | current |
| sleGponProfilePortControlPortDuplex OBJECT-TYPE Port Duplex configuration | 1.3.6.1.4.1.6296.101.23.5.2.2.15 | INTEGER {auto(1), full(2), half(3)} | read-write | current |
| sleGponProfilePortControlPortSpeed OBJECT-TYPE Port Speed configuration | 1.3.6.1.4.1.6296.101.23.5.2.2.16 | INTEGER {auto(1), speed10M(2), speed100M(3), speed1000M(4)} | read-write | current |
| sleGponProfilePortControlPortPause OBJECT-TYPE Port Pause-time configuration | 1.3.6.1.4.1.6296.101.23.5.2.2.17 | Integer32 | read-write | current |
| sleGponProfilePortNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.2.3 | |||
| sleGponProfileDba OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.3 | |||
| sleGponProfileDbaTable OBJECT-TYPE sleGponProfileDbaTable | 1.3.6.1.4.1.6296.101.23.5.3.1 | not-accessible | current | |
| sleGponProfileDbaEntry OBJECT-TYPE key: sleGponProfileDbaId | 1.3.6.1.4.1.6296.101.23.5.3.1.1 | not-accessible | current | |
| sleGponProfileDbaId OBJECT-TYPE DBA Profile Id | 1.3.6.1.4.1.6296.101.23.5.3.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfileDbaName OBJECT-TYPE DBA Profile Name | 1.3.6.1.4.1.6296.101.23.5.3.1.1.2 | OCTET STRING | read-only | current |
| sleGponProfileDbaMode OBJECT-TYPE DBA mode | 1.3.6.1.4.1.6296.101.23.5.3.1.1.3 | INTEGER {fixed(1), sr(2), nsr(3), unknown(255)} | read-only | current |
| sleGponProfileDbaSlaFixedBw OBJECT-TYPE 128-1031616, unit : 64kbps | 1.3.6.1.4.1.6296.101.23.5.3.1.1.4 | Integer32 | read-only | current |
| sleGponProfileDbaSlaAssuredBw OBJECT-TYPE 0-1031616, unit : 64kbps | 1.3.6.1.4.1.6296.101.23.5.3.1.1.5 | Integer32 | read-only | current |
| sleGponProfileDbaSlaMaxBw OBJECT-TYPE 128-1031616, unit : 64kbps | 1.3.6.1.4.1.6296.101.23.5.3.1.1.6 | Integer32 | read-only | current |
| sleGponProfileDbaControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.3.2 | |||
| sleGponProfileDbaControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.5.3.2.1 | INTEGER {createProfile(1), destroyProfile(2), updateProfile(3)} | read-write | current |
| sleGponProfileDbaControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.5.3.2.2 | SleControlStatusType | read-only | current |
| sleGponProfileDbaControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.5.3.2.3 | Gauge32 | read-write | current |
| sleGponProfileDbaControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.5.3.2.4 | TimeTicks | read-only | current |
| sleGponProfileDbaControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.5.3.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfileDbaControlId OBJECT-TYPE DBA profile Index | 1.3.6.1.4.1.6296.101.23.5.3.2.6 | INTEGER (1..65535) | read-write | current |
| sleGponProfileDbaControlName OBJECT-TYPE DBA Profile Name | 1.3.6.1.4.1.6296.101.23.5.3.2.7 | OCTET STRING | read-write | current |
| sleGponProfileDbaControlMode OBJECT-TYPE DBA mode | 1.3.6.1.4.1.6296.101.23.5.3.2.8 | INTEGER {fixed(1), sr(2), nsr(3), unknown(255)} | read-write | current |
| sleGponProfileDbaControlSlaFixedBw OBJECT-TYPE 128-1031616, unit : 64kbps | 1.3.6.1.4.1.6296.101.23.5.3.2.9 | Integer32 | read-write | current |
| sleGponProfileDbaControlSlaAssuredBw OBJECT-TYPE 0-1031616, unit : 64kbps | 1.3.6.1.4.1.6296.101.23.5.3.2.10 | Integer32 | read-write | current |
| sleGponProfileDbaControlSlaMaxBw OBJECT-TYPE 128-1031616, unit : 64kbps | 1.3.6.1.4.1.6296.101.23.5.3.2.11 | Integer32 | read-write | current |
| sleGponProfileDbaNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.3.3 | |||
| sleGponProfileMultiTcont OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.4 | |||
| sleGponProfileMultiTcontTable OBJECT-TYPE sleGponProfileMultiTcontTable | 1.3.6.1.4.1.6296.101.23.5.4.1 | not-accessible | current | |
| sleGponProfileMultiTcontEntry OBJECT-TYPE key: sleGponProfileMultiTcontIndex | 1.3.6.1.4.1.6296.101.23.5.4.1.1 | not-accessible | current | |
| sleGponProfileMultiTcontIndex OBJECT-TYPE MultiTconT Profile Id | 1.3.6.1.4.1.6296.101.23.5.4.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfileMultiTcontName OBJECT-TYPE MultiTconT Profile Name | 1.3.6.1.4.1.6296.101.23.5.4.1.1.2 | OCTET STRING | read-only | current |
| sleGponProfileMultiTconTDscp2Pbit OBJECT-TYPE Multi-Tcont DSCP2Pbit. | 1.3.6.1.4.1.6296.101.23.5.4.1.1.3 | INTEGER {enable(1), disable(2), unknown(255)} | read-only | current |
| sleGponProfileMultiTconTPriQWeightCnt OBJECT-TYPE Priority Q & Weight mapping count | 1.3.6.1.4.1.6296.101.23.5.4.1.1.4 | INTEGER (1..65535) | read-only | current |
| sleGponProfileMultiTconTPriQWeight OBJECT-TYPE Priority Q & Weight MAP 2bytes per each Q-ID, Example) queue-weight 1-2,5 63 / queue-weight 8 22 --> # 003f 003f 0000 0000 003f 0000 0000 0016 | 1.3.6.1.4.1.6296.101.23.5.4.1.1.5 | OCTET STRING | read-only | current |
| sleGponProfileMultiTcontGemPortType OBJECT-TYPE Multi Tcon Gem port type | 1.3.6.1.4.1.6296.101.23.5.4.1.1.6 | INTEGER {eth(1), voip(2), unknown(255)} | read-only | current |
| sleGponProfileMultiTcontGemportUniPortList OBJECT-TYPE Multi Tcon Gem port Uni port list | 1.3.6.1.4.1.6296.101.23.5.4.1.1.7 | Bits {uni1(0), uni2(1), uni3(2), uni4(3), uni5(4), uni6(5), uni7(6), uni8(7)} | read-only | current |
| sleGponProfileMultiTcontGemPortVlanCnt OBJECT-TYPE VLAN ID counter | 1.3.6.1.4.1.6296.101.23.5.4.1.1.8 | INTEGER (1..65535) | read-only | current |
| sleGponProfileMultiTcontGemPortVlanList OBJECT-TYPE bitmap, Vlan ID List, 2 bytes per each VLAN. Exampel) gemport eth 1 vid 1-8,10 count 1 --> # 0001 0002 0003 0004 0005 0006 0007 0008 000a | 1.3.6.1.4.1.6296.101.23.5.4.1.1.9 | OCTET STRING | read-only | current |
| sleGponProfileMultiTcontGemPortCount OBJECT-TYPE Gem port count | 1.3.6.1.4.1.6296.101.23.5.4.1.1.10 | Integer32 | read-only | current |
| sleGponProfileMultiTcontGemPortDbaProfileName1 OBJECT-TYPE Dba Profile name | 1.3.6.1.4.1.6296.101.23.5.4.1.1.11 | OCTET STRING | read-only | current |
| sleGponProfileMultiTcontGemPortDbaProfileMask1 OBJECT-TYPE Dba Profile Mask (gemport List) | 1.3.6.1.4.1.6296.101.23.5.4.1.1.12 | Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7)} | read-only | current |
| sleGponProfileMultiTcontGemPortDbaProfileName2 OBJECT-TYPE Multi-Tcont Gemport DBA profile Mask | 1.3.6.1.4.1.6296.101.23.5.4.1.1.13 | OCTET STRING | read-only | current |
| sleGponProfileMultiTcontGemPortDbaProfileMask2 OBJECT-TYPE Dba Profile Mask (gemport List) | 1.3.6.1.4.1.6296.101.23.5.4.1.1.14 | Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7)} | read-only | current |
| sleGponProfileMultiTcontGemPortDbaProfileName3 OBJECT-TYPE Dba Profile name | 1.3.6.1.4.1.6296.101.23.5.4.1.1.15 | OCTET STRING | read-only | current |
| sleGponProfileMultiTcontGemPortDbaProfileMask3 OBJECT-TYPE Dba Profile Mask (gemport List) | 1.3.6.1.4.1.6296.101.23.5.4.1.1.16 | Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7)} | read-only | current |
| sleGponProfileMultiTcontGemPortDbaProfileName4 OBJECT-TYPE Dba Profile name | 1.3.6.1.4.1.6296.101.23.5.4.1.1.17 | OCTET STRING | read-only | current |
| sleGponProfileMultiTcontGemPortDbaProfileMask4 OBJECT-TYPE Dba Profile Mask (gemport List) | 1.3.6.1.4.1.6296.101.23.5.4.1.1.18 | Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7)} | read-only | current |
| sleGponProfileMultiTcontGemPortDbaProfileName5 OBJECT-TYPE Dba Profile name | 1.3.6.1.4.1.6296.101.23.5.4.1.1.19 | OCTET STRING | read-only | current |
| sleGponProfileMultiTcontGemPortDbaProfileMask5 OBJECT-TYPE Dba Profile Mask (gemport List) | 1.3.6.1.4.1.6296.101.23.5.4.1.1.20 | Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7)} | read-only | current |
| sleGponProfileMultiTcontGemPortDbaProfileName6 OBJECT-TYPE Dba Profile name | 1.3.6.1.4.1.6296.101.23.5.4.1.1.21 | OCTET STRING | read-only | current |
| sleGponProfileMultiTcontGemPortDbaProfileMask6 OBJECT-TYPE Dba Profile Mask (gemport List) | 1.3.6.1.4.1.6296.101.23.5.4.1.1.22 | Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7)} | read-only | current |
| sleGponProfileMultiTcontGemPortDbaProfileName7 OBJECT-TYPE Dba Profile name | 1.3.6.1.4.1.6296.101.23.5.4.1.1.23 | OCTET STRING | read-only | current |
| sleGponProfileMultiTcontGemPortDbaProfileMask7 OBJECT-TYPE Dba Profile Mask (gemport List) | 1.3.6.1.4.1.6296.101.23.5.4.1.1.24 | Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7)} | read-only | current |
| sleGponProfileMultiTcontGemPortDbaProfileName8 OBJECT-TYPE Dba Profile name | 1.3.6.1.4.1.6296.101.23.5.4.1.1.25 | OCTET STRING | read-only | current |
| sleGponProfileMultiTcontGemPortDbaProfileMask8 OBJECT-TYPE Dba Profile Mask (gemport List) | 1.3.6.1.4.1.6296.101.23.5.4.1.1.26 | Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7)} | read-only | current |
| sleGponProfileMultiTcontControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.4.2 | |||
| sleGponProfileMultiTcontControllRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.5.4.2.1 | INTEGER {createProfile(1), destroyProfile(2), updateDscp2Pbit(3), updatePriQWeight(4), updateGemport(5)} | read-write | current |
| sleGponProfileMultiTcontControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.5.4.2.2 | SleControlStatusType | read-only | current |
| sleGponProfileMultiTcontControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.5.4.2.3 | Gauge32 | read-write | current |
| sleGponProfileMultiTcontControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.5.4.2.4 | TimeTicks | read-only | current |
| sleGponProfileMultiTcontControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.5.4.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfileMultiTcontControlIndex OBJECT-TYPE Multi Tcont profile Index | 1.3.6.1.4.1.6296.101.23.5.4.2.6 | INTEGER (1..65535) | read-write | current |
| sleGponProfileMultiTcontControlName OBJECT-TYPE Profile Name | 1.3.6.1.4.1.6296.101.23.5.4.2.7 | OCTET STRING | read-write | current |
| sleGponProfileMultiTcontControlDscp2Pbit OBJECT-TYPE DSCP to P bit marking | 1.3.6.1.4.1.6296.101.23.5.4.2.8 | INTEGER {enable(1), disable(2), unknown(255)} | read-write | current |
| sleGponProfileMultiTcontControlPriQWeightCnt OBJECT-TYPE TconT PrioQ mapping count | 1.3.6.1.4.1.6296.101.23.5.4.2.9 | Integer32 | read-write | current |
| sleGponProfileMultiTcontControlPriQWeight OBJECT-TYPE Tcont PriQ weight MAP. | 1.3.6.1.4.1.6296.101.23.5.4.2.10 | OCTET STRING | read-write | current |
| sleGponProfileMultiTcontControlGemPortType OBJECT-TYPE Multi Tcon Gem port type | 1.3.6.1.4.1.6296.101.23.5.4.2.11 | INTEGER {eth(1), voip(2), unknown(255)} | read-write | current |
| sleGponProfileMultiTcontControlGemportUniPortList OBJECT-TYPE Multi Tcon Gem port Uni port list | 1.3.6.1.4.1.6296.101.23.5.4.2.12 | Bits {uni1(0), uni2(1), uni3(2), uni4(3), uni5(4), uni6(5), uni7(6), uni8(7)} | read-write | current |
| sleGponProfileMultiTcontControlGemPortVlanCnt OBJECT-TYPE VLAN list mappling count | 1.3.6.1.4.1.6296.101.23.5.4.2.13 | Integer32 | read-write | current |
| sleGponProfileMultiTcontControlGemPortVlanList OBJECT-TYPE VLAN MAP. | 1.3.6.1.4.1.6296.101.23.5.4.2.14 | OCTET STRING | read-write | current |
| sleGponProfileMultiTcontControlGemPortCount OBJECT-TYPE Gemport count | 1.3.6.1.4.1.6296.101.23.5.4.2.15 | Integer32 | read-write | current |
| sleGponProfileMultiTcontControlGemPortDbaProfileName1 OBJECT-TYPE Dba Profile name | 1.3.6.1.4.1.6296.101.23.5.4.2.16 | OCTET STRING | read-write | current |
| sleGponProfileMultiTcontControlGemPortDbaProfileMask1 OBJECT-TYPE Dba Profile Mask (gemport List) | 1.3.6.1.4.1.6296.101.23.5.4.2.17 | Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7)} | read-write | current |
| sleGponProfileMultiTcontControlGemPortDbaProfileName2 OBJECT-TYPE Dba Profile name | 1.3.6.1.4.1.6296.101.23.5.4.2.18 | OCTET STRING | read-write | current |
| sleGponProfileMultiTcontControlGemPortDbaProfileMask2 OBJECT-TYPE Dba Profile Mask (gemport List) | 1.3.6.1.4.1.6296.101.23.5.4.2.19 | Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7)} | read-write | current |
| sleGponProfileMultiTcontControlGemPortDbaProfileName3 OBJECT-TYPE Dba Profile name | 1.3.6.1.4.1.6296.101.23.5.4.2.20 | OCTET STRING | read-write | current |
| sleGponProfileMultiTcontControlGemPortDbaProfileMask3 OBJECT-TYPE Dba Profile Mask (gemport List) | 1.3.6.1.4.1.6296.101.23.5.4.2.21 | Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7)} | read-write | current |
| sleGponProfileMultiTcontControlGemPortDbaProfileName4 OBJECT-TYPE Dba Profile name | 1.3.6.1.4.1.6296.101.23.5.4.2.22 | OCTET STRING | read-write | current |
| sleGponProfileMultiTcontControlGemPortDbaProfileMask4 OBJECT-TYPE Dba Profile Mask (gemport List) | 1.3.6.1.4.1.6296.101.23.5.4.2.23 | Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7)} | read-write | current |
| sleGponProfileMultiTcontControlGemPortDbaProfileName5 OBJECT-TYPE Dba Profile name | 1.3.6.1.4.1.6296.101.23.5.4.2.24 | OCTET STRING | read-write | current |
| sleGponProfileMultiTcontControlGemPortDbaProfileMask5 OBJECT-TYPE Dba Profile Mask (gemport List) | 1.3.6.1.4.1.6296.101.23.5.4.2.25 | Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7)} | read-write | current |
| sleGponProfileMultiTcontControlGemPortDbaProfileName6 OBJECT-TYPE Dba Profile name | 1.3.6.1.4.1.6296.101.23.5.4.2.26 | OCTET STRING | read-write | current |
| sleGponProfileMultiTcontControlGemPortDbaProfileMask6 OBJECT-TYPE Dba Profile Mask (gemport List) | 1.3.6.1.4.1.6296.101.23.5.4.2.27 | Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7)} | read-write | current |
| sleGponProfileMultiTcontControlGemPortDbaProfileName7 OBJECT-TYPE Dba Profile name | 1.3.6.1.4.1.6296.101.23.5.4.2.28 | OCTET STRING | read-write | current |
| sleGponProfileMultiTcontControlGemPortDbaProfileMask7 OBJECT-TYPE Dba Profile Mask (gemport List) | 1.3.6.1.4.1.6296.101.23.5.4.2.29 | Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7)} | read-write | current |
| sleGponProfileMultiTcontControlGemPortDbaProfileName8 OBJECT-TYPE Dba Profile name | 1.3.6.1.4.1.6296.101.23.5.4.2.30 | OCTET STRING | read-write | current |
| sleGponProfileMultiTcontControlGemPortDbaProfileMask8 OBJECT-TYPE Dba Profile Mask (gemport List) | 1.3.6.1.4.1.6296.101.23.5.4.2.31 | Bits {port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7)} | read-write | current |
| sleGponProfileMultiTcontNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.4.3 | |||
| sleGponVoIP OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.5 | |||
| sleGponProfileVoIP OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.5.1 | |||
| sleGponProfileVoIPTable OBJECT-TYPE sleGponProfileVoIPTable | 1.3.6.1.4.1.6296.101.23.5.5.1.1 | not-accessible | current | |
| sleGponProfileVoIPEntry OBJECT-TYPE sleGponProfileVoIPIndex | 1.3.6.1.4.1.6296.101.23.5.5.1.1.1 | not-accessible | current | |
| sleGponProfileVoIPIndex OBJECT-TYPE VoIP Profile Index. | 1.3.6.1.4.1.6296.101.23.5.5.1.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfileVoIPName OBJECT-TYPE VoIP profile name. | 1.3.6.1.4.1.6296.101.23.5.5.1.1.1.2 | OCTET STRING | read-only | current |
| sleGponProfileVoIPServiceMode OBJECT-TYPE VoIP service mode. | 1.3.6.1.4.1.6296.101.23.5.5.1.1.1.3 | INTEGER {ipPath(1), omci(2), unknown(3)} | read-only | current |
| sleGponProfileVoIPServiceProtocol OBJECT-TYPE VoIP service Protocol. | 1.3.6.1.4.1.6296.101.23.5.5.1.1.1.4 | INTEGER {h248(1), mgcp(2), sip(3), unknown(4)} | read-only | current |
| sleGponProfileVoIPOmciAgentURL OBJECT-TYPE OMCI agent URL. | 1.3.6.1.4.1.6296.101.23.5.5.1.1.1.5 | OCTET STRING | read-only | current |
| sleGponProfileVoIPOmciAgentProxy OBJECT-TYPE OMCI agent proxy. | 1.3.6.1.4.1.6296.101.23.5.5.1.1.1.6 | OCTET STRING | read-only | current |
| sleGponProfileVoIPOmciAgentDns1 OBJECT-TYPE OCMI agent DNS primary | 1.3.6.1.4.1.6296.101.23.5.5.1.1.1.7 | IpAddress | read-only | current |
| sleGponProfileVoIPOmciAgentDns2 OBJECT-TYPE OMCI agent DNS secondary | 1.3.6.1.4.1.6296.101.23.5.5.1.1.1.8 | IpAddress | read-only | current |
| sleGponProfileVoIPIpwayAuthName OBJECT-TYPE IP PATH AUTH name | 1.3.6.1.4.1.6296.101.23.5.5.1.1.1.9 | OCTET STRING | read-only | current |
| sleGponProfileVoIPIpwayAuthPasswd OBJECT-TYPE IP PATH AUTH Password(UnUsed) | 1.3.6.1.4.1.6296.101.23.5.5.1.1.1.10 | OCTET STRING | read-only | current |
| sleGponProfileVoIPIpwayURL OBJECT-TYPE IP PATH AUTH URL | 1.3.6.1.4.1.6296.101.23.5.5.1.1.1.11 | OCTET STRING | read-only | current |
| sleGponProfileVoIPControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.5.1.2 | |||
| sleGponProfileVoIPControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.5.5.1.2.1 | INTEGER {createProfile(1), destroyProfile(2), updateService(3), updateOmci(4), updateIpWay(5)} | read-write | current |
| sleGponProfileVoIPControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.5.5.1.2.2 | SleControlStatusType | read-only | current |
| sleGponProfileVoIPControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.5.5.1.2.3 | Gauge32 | read-write | current |
| sleGponProfileVoIPControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.5.5.1.2.4 | TimeTicks | read-only | current |
| sleGponProfileVoIPControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.5.5.1.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfileVoIPControlIndex OBJECT-TYPE Multi Tcont profile Index | 1.3.6.1.4.1.6296.101.23.5.5.1.2.6 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPControlName OBJECT-TYPE Profile Name | 1.3.6.1.4.1.6296.101.23.5.5.1.2.7 | OCTET STRING | read-write | current |
| sleGponProfileVoIPControlServiceMode OBJECT-TYPE VoIP service mode | 1.3.6.1.4.1.6296.101.23.5.5.1.2.8 | INTEGER {ipPath(1), omci(2), unknown(3)} | read-write | current |
| sleGponProfileVoIPControlServiceProtocol OBJECT-TYPE VoIP service Protocol. | 1.3.6.1.4.1.6296.101.23.5.5.1.2.9 | INTEGER {h248(1), mgcp(2), sip(3), unknown(4)} | read-write | current |
| sleGponProfileVoIPControlOmciAgentURL OBJECT-TYPE OMCI agent URL. | 1.3.6.1.4.1.6296.101.23.5.5.1.2.10 | OCTET STRING | read-write | current |
| sleGponProfileVoIPControlOmciAgentProxy OBJECT-TYPE OMCI agent proxy. | 1.3.6.1.4.1.6296.101.23.5.5.1.2.11 | OCTET STRING | read-write | current |
| sleGponProfileVoIPControlOmciAgentDns1 OBJECT-TYPE OCMI agent DNS primary | 1.3.6.1.4.1.6296.101.23.5.5.1.2.12 | IpAddress | read-write | current |
| sleGponProfileVoIPControlOmciAgentDns2 OBJECT-TYPE OMCI agent DNS secondary | 1.3.6.1.4.1.6296.101.23.5.5.1.2.13 | IpAddress | read-write | current |
| sleGponProfileVoIPControlIpwayAuthName OBJECT-TYPE IP PATH AUTH name | 1.3.6.1.4.1.6296.101.23.5.5.1.2.14 | OCTET STRING | read-write | current |
| sleGponProfileVoIPControlIpwayAuthPasswd OBJECT-TYPE IP PATH AUTH Password(UnUsed) | 1.3.6.1.4.1.6296.101.23.5.5.1.2.15 | OCTET STRING | read-write | current |
| sleGponProfileVoIPControlIpwayURL OBJECT-TYPE IP PATH AUTH URL | 1.3.6.1.4.1.6296.101.23.5.5.1.2.16 | OCTET STRING | read-write | current |
| sleGponProfileVoIPNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.5.1.3 | |||
| sleGponProfileVoIPOmci OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.5.2 | |||
| sleGponProfileVoIPOmciTable OBJECT-TYPE sleGponProfileVoIPOmciTable | 1.3.6.1.4.1.6296.101.23.5.5.2.1 | not-accessible | current | |
| sleGponProfileVoIPOmciEntry OBJECT-TYPE key: sleGponOltId, sleGponOnuId, sleGponProfileVoIPOmciUniPortId | 1.3.6.1.4.1.6296.101.23.5.5.2.1.1 | not-accessible | current | |
| sleGponProfileVoIPOmciUniPortId OBJECT-TYPE OMCI UNI port Id | 1.3.6.1.4.1.6296.101.23.5.5.2.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfileVoIPOmciAuthName OBJECT-TYPE OMCI AUTH name | 1.3.6.1.4.1.6296.101.23.5.5.2.1.1.2 | OCTET STRING | read-only | current |
| sleGponProfileVoIPOmciAuthPasswd OBJECT-TYPE OMCI AUTH Password | 1.3.6.1.4.1.6296.101.23.5.5.2.1.1.3 | OCTET STRING | read-only | current |
| sleGponProfileVoIPOmciPhoneNumber OBJECT-TYPE OMCI Phone number | 1.3.6.1.4.1.6296.101.23.5.5.2.1.1.4 | OCTET STRING | read-only | current |
| sleGponProfileVoIPOmciDisplay OBJECT-TYPE OMCI Phone Display | 1.3.6.1.4.1.6296.101.23.5.5.2.1.1.5 | OCTET STRING | read-only | current |
| sleGponProfileVoIPOmciMgcTerminationId OBJECT-TYPE The MGC termination ID | 1.3.6.1.4.1.6296.101.23.5.5.2.1.1.6 | OCTET STRING | read-only | current |
| sleGponProfileVoIPOmciControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.5.2.2 | |||
| sleGponProfileVoIPOmciControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.5.5.2.2.1 | INTEGER {setSIPAuth(1), setSIPPhone(2), setMGCTermination(3)} | read-write | current |
| sleGponProfileVoIPOmciControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.5.5.2.2.2 | SleControlStatusType | read-only | current |
| sleGponProfileVoIPOmciControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.5.5.2.2.3 | Gauge32 | read-write | current |
| sleGponProfileVoIPOmciControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.5.5.2.2.4 | TimeTicks | read-only | current |
| sleGponProfileVoIPOmciControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.5.5.2.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfileVoIPOmciControlOltIndex OBJECT-TYPE OLT Index | 1.3.6.1.4.1.6296.101.23.5.5.2.2.6 | INTEGER (1..2147483647) | read-write | current |
| sleGponProfileVoIPOmciControlOnuIndex OBJECT-TYPE ONU Index | 1.3.6.1.4.1.6296.101.23.5.5.2.2.7 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPOmciControlUniId OBJECT-TYPE UNI port Index | 1.3.6.1.4.1.6296.101.23.5.5.2.2.8 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPOmciControlAuthName OBJECT-TYPE OMCI AUTH name | 1.3.6.1.4.1.6296.101.23.5.5.2.2.9 | OCTET STRING | read-write | current |
| sleGponProfileVoIPOmciControlAuthPasswd OBJECT-TYPE OMCI AUTH Password | 1.3.6.1.4.1.6296.101.23.5.5.2.2.10 | OCTET STRING | read-write | current |
| sleGponProfileVoIPOmciControlPhoneNumber OBJECT-TYPE OMCI Phone number | 1.3.6.1.4.1.6296.101.23.5.5.2.2.11 | OCTET STRING | read-write | current |
| sleGponProfileVoIPOmciControlDisplay OBJECT-TYPE OMCI Phone Display | 1.3.6.1.4.1.6296.101.23.5.5.2.2.12 | OCTET STRING | read-write | current |
| sleGponProfileVoIPOmciControlMgcTerminationId OBJECT-TYPE The MGC termination ID | 1.3.6.1.4.1.6296.101.23.5.5.2.2.13 | OCTET STRING | read-write | current |
| sleGponProfileVoIPOmciNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.5.2.3 | |||
| sleGponProfileVoIPIpPath OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.5.3 | |||
| sleGponProfileVoIPIpPathTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.3.1 | not-accessible | current | |
| sleGponProfileVoIPIpPathEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.3.1.1 | not-accessible | current | |
| sleGponProfileVoIPIpPathAuthName OBJECT-TYPE IP PATH AUTH name(UnUsed) | 1.3.6.1.4.1.6296.101.23.5.5.3.1.1.1 | OCTET STRING | read-only | current |
| sleGponProfileVoIPIpPathAuthPasswd OBJECT-TYPE IP PATH AUTH Password(UnUsed) | 1.3.6.1.4.1.6296.101.23.5.5.3.1.1.2 | OCTET STRING | read-only | current |
| sleGponProfileVoIPIpPathURL OBJECT-TYPE IP PATH AUTH URL(UnUsed) | 1.3.6.1.4.1.6296.101.23.5.5.3.1.1.3 | OCTET STRING | read-only | current |
| sleGponProfileVoIPIpPathControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.5.3.2 | |||
| sleGponProfileVoIPIpPathControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.5.5.3.2.1 | INTEGER {setVoIPIPPathControlInfo(1)} | read-write | current |
| sleGponProfileVoIPIpPathControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.5.5.3.2.2 | SleControlStatusType | read-only | current |
| sleGponProfileVoIPIpPathControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.5.5.3.2.3 | Gauge32 | read-write | current |
| sleGponProfileVoIPIpPathControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.5.5.3.2.4 | TimeTicks | read-only | current |
| sleGponProfileVoIPIpPathControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.5.5.3.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfileVoIPIpPathControlOltIndex OBJECT-TYPE OLT Index | 1.3.6.1.4.1.6296.101.23.5.5.3.2.6 | INTEGER (1..2147483647) | read-write | current |
| sleGponProfileVoIPIpPathControlOnuIndex OBJECT-TYPE ONU Index | 1.3.6.1.4.1.6296.101.23.5.5.3.2.7 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPIpPathControlAuthName OBJECT-TYPE IP PATH AUTH name | 1.3.6.1.4.1.6296.101.23.5.5.3.2.8 | OCTET STRING | read-write | current |
| sleGponProfileVoIPIpPathControlAuthPasswd OBJECT-TYPE IP PATH AUTH Password | 1.3.6.1.4.1.6296.101.23.5.5.3.2.9 | OCTET STRING | read-write | current |
| sleGponProfileVoIPIpPathNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.5.3.3 | |||
| sleGponProfileVoIPPots OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.5.4 | |||
| sleGponProfileVoIPPotsTable OBJECT-TYPE sleGponProfileVoIPPotsTable | 1.3.6.1.4.1.6296.101.23.5.5.4.1 | not-accessible | current | |
| sleGponProfileVoIPPotsEntry OBJECT-TYPE key: sleGponProfileVoIPPotsPIndex, sleGponProfileVoIPPotsIndex | 1.3.6.1.4.1.6296.101.23.5.5.4.1.1 | not-accessible | current | |
| sleGponProfileVoIPPotsPIndex OBJECT-TYPE VoIP Profile Index | 1.3.6.1.4.1.6296.101.23.5.5.4.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfileVoIPPotsIndex OBJECT-TYPE Pptp Pots Index | 1.3.6.1.4.1.6296.101.23.5.5.4.1.1.2 | Integer32 (1..65535) | read-only | current |
| sleGponProfileVoIPPotsAdmin OBJECT-TYPE State of ONU Pots Administratoration | 1.3.6.1.4.1.6296.101.23.5.5.4.1.1.3 | EnableFlag | read-only | current |
| sleGponProfileVoIPPotsControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.5.4.2 | |||
| sleGponProfileVoIPPotsControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.5.5.4.2.1 | INTEGER {addPots(1), delPots(2)} | read-write | current |
| sleGponProfileVoIPPotsControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.5.5.4.2.2 | SleControlStatusType | read-only | current |
| sleGponProfileVoIPPotsControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.5.5.4.2.3 | Gauge32 | read-write | current |
| sleGponProfileVoIPPotsControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.5.5.4.2.4 | TimeTicks | read-only | current |
| sleGponProfileVoIPPotsControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.5.5.4.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfileVoIPPotsControlProfileIndex OBJECT-TYPE VoIP Profile Index | 1.3.6.1.4.1.6296.101.23.5.5.4.2.6 | Integer32 | read-write | current |
| sleGponProfileVoIPPotsControlPotsIndex OBJECT-TYPE Pptp Pots Index | 1.3.6.1.4.1.6296.101.23.5.5.4.2.7 | Integer32 | read-write | current |
| sleGponProfileVoIPPotsControlAdmin OBJECT-TYPE State of ONU Pots Administratoration | 1.3.6.1.4.1.6296.101.23.5.5.4.2.8 | EnableFlag | read-write | current |
| sleGponProfileVoIPPotsNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.5.4.3 | |||
| sleGponProfileVoIPDetail OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.5.5 | |||
| sleGponProfileVoIPDetailTable OBJECT-TYPE sleGponProfileVoIPDetailTable | 1.3.6.1.4.1.6296.101.23.5.5.5.1 | not-accessible | current | |
| sleGponProfileVoIPDetailEntry OBJECT-TYPE key: sleGponProfileVoIPDetailIndex | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1 | not-accessible | current | |
| sleGponProfileVoIPDetailIndex OBJECT-TYPE VoIP Profile Index. | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponProfileVoIPDetailName OBJECT-TYPE VoIP profile name. | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.2 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailFaxMode OBJECT-TYPE VoIP fax mode. | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.3 | INTEGER {passthru(0), t38(1)} | read-only | current |
| sleGponProfileVoIPDetailCodecType1st OBJECT-TYPE VoIP codec type 1st. | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.4 | INTEGER {pcmu(0), gsm(3), g723(4), dvi4and8k(5), dvi4and16k(6), lpc(7), pcma(8), g722(9), l16and2ch(10), l16and1h(11), qcelp(12), cn(13), mpa(14), g728(15), dvi4and11k(16), dvi4and22k(17), g729(18)} | read-only | current |
| sleGponProfileVoIPDetailCodecPeriod1st OBJECT-TYPE Codec sampling period1st | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.5 | INTEGER (1..65535) | read-only | current |
| sleGponProfileVoIPDetailCodecSilenceSuppression1st OBJECT-TYPE VoIP codec silence suppression 1st | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.6 | INTEGER (1..65535) | read-only | current |
| sleGponProfileVoIPDetailCodecType2nd OBJECT-TYPE VoIP codec type 2nd | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.7 | INTEGER {pcmu(0), gsm(3), g723(4), dvi4and8k(5), dvi4and16k(6), lpc(7), pcma(8), g722(9), l16and2ch(10), l16and1h(11), qcelp(12), cn(13), mpa(14), g728(15), dvi4and11k(16), dvi4and22k(17), g729(18)} | read-only | current |
| sleGponProfileVoIPDetailCodecPeriod2nd OBJECT-TYPE Codec sampling period 2nd | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.8 | INTEGER (1..65535) | read-only | current |
| sleGponProfileVoIPDetailCodecSilenceSuppression2nd OBJECT-TYPE VoIP codec silence suppression 2nd | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.9 | INTEGER (1..65535) | read-only | current |
| sleGponProfileVoIPDetailCodecType3rd OBJECT-TYPE VoIP codec type 3rd | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.10 | INTEGER {pcmu(0), gsm(3), g723(4), dvi4and8k(5), dvi4and16k(6), lpc(7), pcma(8), g722(9), l16and2ch(10), l16and1h(11), qcelp(12), cn(13), mpa(14), g728(15), dvi4and11k(16), dvi4and22k(17), g729(18)} | read-only | current |
| sleGponProfileVoIPDetailCodecPeriod3rd OBJECT-TYPE Codec sampling period 3rd | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.11 | INTEGER (1..65535) | read-only | current |
| sleGponProfileVoIPDetailCodecSilenceSuppression3rd OBJECT-TYPE VoIP codec silence suppression 3rd. | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.12 | INTEGER (1..65535) | read-only | current |
| sleGponProfileVoIPDetailCodecType4th OBJECT-TYPE VoIP codec type 4th | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.13 | INTEGER {pcmu(0), gsm(3), g723(4), dvi4and8k(5), dvi4and16k(6), lpc(7), pcma(8), g722(9), l16and2ch(10), l16and1h(11), qcelp(12), cn(13), mpa(14), g728(15), dvi4and11k(16), dvi4and22k(17), g729(18)} | read-only | current |
| sleGponProfileVoIPDetailCodecPeriod4th OBJECT-TYPE Codec sampling period 4th | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.14 | INTEGER (1..65535) | read-only | current |
| sleGponProfileVoIPDetailCodecSilenceSuppression4th OBJECT-TYPE VoIP codec silence suppression 4th. | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.15 | INTEGER (1..65535) | read-only | current |
| sleGponProfileVoIPDetailOobdtmf OBJECT-TYPE Control DTMF(Dual Tone Multi-Frequency) | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.16 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponProfileVoIPDetailAnnouncementType OBJECT-TYPE VoIp announcement type | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.17 | INTEGER {silence(1), reorderTone(2), fastBusy(3), voiceAnnouncement(4)} | read-only | current |
| sleGponProfileVoIPDetailJitterTarget OBJECT-TYPE Jitter target (milliseconds) | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.18 | INTEGER (1..65535) | read-only | current |
| sleGponProfileVoIPDetailJitterBuffMax OBJECT-TYPE VoIP jitter buffer max. | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.19 | INTEGER (0..65535) | read-only | current |
| sleGponProfileVoIPDetailEchoCancel OBJECT-TYPE VoIP echo cancel | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.20 | INTEGER {false(0), ture(1)} | read-only | current |
| sleGponProfileVoIPDetailPstnProtoVariant OBJECT-TYPE PSTN Protocol Variant | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.21 | INTEGER (1..65535) | read-only | current |
| sleGponProfileVoIPDetailDtmfDigitLevels OBJECT-TYPE DTMF digit Power Level configuration | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.22 | INTEGER (0..65535) | read-only | current |
| sleGponProfileVoIPDetailDtmfDigitDuration OBJECT-TYPE DTMF digit Power Duration configuration | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.23 | INTEGER (0..65535) | read-only | current |
| sleGponProfileVoIPDetailHookFlashTimeMin OBJECT-TYPE VoIP hook Flash Time Minimum | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.24 | INTEGER (0..65535) | read-only | current |
| sleGponProfileVoIPDetailHookFlashTimeMax OBJECT-TYPE VoIP hook Flash Time Maximum | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.25 | INTEGER (0..65535) | read-only | current |
| sleGponProfileVoIPDetailSignalingCode OBJECT-TYPE VoIP signaling code. | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.26 | INTEGER {loopStart(1), groundStart(2), loopReverseBattery(3), coinFirst(4), dialToneFirst(5), multiParty(6)} | read-only | current |
| sleGponProfileVoIPDetailRtpLocalPortMin OBJECT-TYPE RTP Local Port Min | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.27 | INTEGER (1..65535) | read-only | current |
| sleGponProfileVoIPDetailRtpLocalPortMax OBJECT-TYPE RTP Local Port Max | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.28 | INTEGER (1..65535) | read-only | current |
| sleGponProfileVoIPDetailRtpDscpMark OBJECT-TYPE RTP DSCP Mark | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.29 | INTEGER (1..65535) | read-only | current |
| sleGponProfileVoIPDetailRtpPiggybackEvent OBJECT-TYPE RTP Piggyback event | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.30 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponProfileVoIPDetailRtpToneEvent OBJECT-TYPE RTP Tone event | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.31 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponProfileVoIPDetailRtpDtmfEvent OBJECT-TYPE RTP DTMF event | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.32 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponProfileVoIPDetailRtpCasEvent OBJECT-TYPE RTP CAS events | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.33 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponProfileVoIPDetailProtocol OBJECT-TYPE VoIP Protocol configuration | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.34 | INTEGER {none(0), sip(1), h248(2), mgcp(3)} | read-only | current |
| sleGponProfileVoIPDetailMgcPriServer OBJECT-TYPE The primary server name. | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.35 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailMgcSecServer OBJECT-TYPE The secondary server name. | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.36 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailMgcMsgVersion OBJECT-TYPE The message version. | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.37 | INTEGER (1..255) | read-only | current |
| sleGponProfileVoIPDetailMgcMsgFormat OBJECT-TYPE The message format. 0:textLong 1:textShort 2:binary | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.38 | INTEGER {textLong(0), textShort(1), binary(2)} | read-only | current |
| sleGponProfileVoIPDetailMgcMaxRetryTime OBJECT-TYPE The max retry time. 65535: unused | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.39 | INTEGER (0..65535) | read-only | current |
| sleGponProfileVoIPDetailMgcMaxRetryAttempts OBJECT-TYPE The max retry attemption 65535: unused | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.40 | INTEGER (0..65535) | read-only | current |
| sleGponProfileVoIPDetailMgcSvcChangeDelay OBJECT-TYPE The service change delay 65535: unused | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.41 | INTEGER (0..65535) | read-only | current |
| sleGponProfileVoIPDetailMgcTerminationId OBJECT-TYPE The termination id. | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.42 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailMgcSoftswitch OBJECT-TYPE The soft switch | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.43 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailVoicemailServer OBJECT-TYPE VoIP voice mail server. | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.44 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailVoicemmailExpireTime OBJECT-TYPE VoIP voice mail Expire time | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.45 | INTEGER (1..65535) | read-only | current |
| sleGponProfileVoIPDetailReleaseTime OBJECT-TYPE VoIp release time | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.46 | INTEGER (1..65535) | read-only | current |
| sleGponProfileVoIPDetailRohTimer OBJECT-TYPE ROH timer | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.47 | INTEGER (1..65535) | read-only | current |
| sleGponProfileVoIPDetailProxyServer OBJECT-TYPE Proxy server address | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.48 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailOutboundProxyServer OBJECT-TYPE Outbound proxy address | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.49 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailRegisterServer OBJECT-TYPE VoIP register server | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.50 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailHostPartServer OBJECT-TYPE VoIp host part server. | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.51 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailPriDns OBJECT-TYPE VoIP primary dns | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.52 | IpAddress | read-only | current |
| sleGponProfileVoIPDetailSecDns OBJECT-TYPE VoIP secondary dns | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.53 | IpAddress | read-only | current |
| sleGponProfileVoIPDetailRegExpTime OBJECT-TYPE Registration expiration time | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.54 | INTEGER (1..65535) | read-only | current |
| sleGponProfileVoIPDetailReregHeadStartTime OBJECT-TYPE Registration head start time | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.55 | INTEGER (1..65535) | read-only | current |
| sleGponProfileVoIPDetailSoftSwitchVendor OBJECT-TYPE Softswitch Vendor name | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.56 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailSipOptionTransmitCtl OBJECT-TYPE Transmit control | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.57 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponProfileVoIPDetailSipUriFormat OBJECT-TYPE URI format | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.58 | INTEGER {telUri(0), sipUri(1)} | read-only | current |
| sleGponProfileVoIPDetailCallerId OBJECT-TYPE Caller ID feature | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.59 | Bits {callNumber(0), callName(1), cidBlocking(2), cidNumber(3), cidName(4), acr(5)} | read-only | current |
| sleGponProfileVoIPDetailCallWaiting OBJECT-TYPE Call waiting features | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.60 | Bits {callFeature(0), cidAnnounce(1)} | read-only | current |
| sleGponProfileVoIPDetailCallProgressTransfer OBJECT-TYPE Call progress or transfer features | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.61 | Bits {threeWay(0), callTransfer(1), callHold(2), callPark(3), notDisturb(4), flashEmergCall(5), emergOriginatingHold(6)} | read-only | current |
| sleGponProfileVoIPDetailCallPresent OBJECT-TYPE Call presentation features | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.62 | Bits {splashRing(0), dialTone(1), visualIndicate(2), callForward(3)} | read-only | current |
| sleGponProfileVoIPDetailDirectConnect OBJECT-TYPE Direct connect feature | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.63 | INTEGER {disable(0), enable(1), delayOption(2)} | read-only | current |
| sleGponProfileVoIPDetailDirectConnectUri OBJECT-TYPE Direct connect URI | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.64 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailBridgedLineAgentUri OBJECT-TYPE Bridged line agent URI | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.65 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailConferenceFactoryUri OBJECT-TYPE Conference factory URI | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.66 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailCancelCallWait OBJECT-TYPE Cancel call waiting | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.67 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailCallHold OBJECT-TYPE Call hold | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.68 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailCallPark OBJECT-TYPE Call park | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.69 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailCallerIdAct OBJECT-TYPE Caller ID activate | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.70 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailCallerIdDeact OBJECT-TYPE Caller ID deactivate | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.71 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailDoNotDisturbAct OBJECT-TYPE Do not disturb activation | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.72 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailDoNotDisturbDeact OBJECT-TYPE Do not disturb deactivation | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.73 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailDoNotDisturbPinChange OBJECT-TYPE Do not disturb PIN change | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.74 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailEmergServiceNumber OBJECT-TYPE Emergency service number | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.75 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailIntercomService OBJECT-TYPE Intercom service | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.76 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailDialplanCritTimeout OBJECT-TYPE dial-plan crit-timeout TIMEOUT (ms) | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.77 | INTEGER (0..65535) | read-only | current |
| sleGponProfileVoIPDetailDialplanPartTimeout OBJECT-TYPE dial-plan part-timeout TIMEOUT (ms) | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.78 | INTEGER (0..65535) | read-only | current |
| sleGponProfileVoIPDetailDialplanFormat OBJECT-TYPE dial-plan format (h248|nsc|vendor) | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.79 | INTEGER {h248(1), nsc(2), vendor(3)} | read-only | current |
| sleGponProfileVoIPDetailSpecialLineService OBJECT-TYPE Special Line Service | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.80 | INTEGER {disable(0), enableHotLine(1), enableWarmLine(2)} | read-only | current |
| sleGponProfileVoIPDetailWarmLineTimeout OBJECT-TYPE Warm Line Waiting Time | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.81 | Integer32 (0..30) | read-only | current |
| sleGponProfileVoIPDetailLineNumber OBJECT-TYPE Special Line Number | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.82 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailThreeWaySSWMixing OBJECT-TYPE 3Way Call Voice Mixing | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.83 | INTEGER {server(0), client(1)} | read-only | current |
| sleGponProfileVoIPDetailSIPDNSCache OBJECT-TYPE SIP Stack DNS Cache update policy | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.84 | INTEGER {ttl(0), permanent(1)} | read-only | current |
| sleGponProfileVoIPDetailSIPTimerT1 OBJECT-TYPE First Response Wait Time | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.85 | Integer32 (0..2500) | read-only | current |
| sleGponProfileVoIPDetailSIPTimerT2 OBJECT-TYPE Next Increase Waiting Time | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.86 | Integer32 (0..5000) | read-only | current |
| sleGponProfileVoIPDetailSIPTimerTd OBJECT-TYPE Max Transaction Time | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.87 | Integer32 (5000..65535) | read-only | current |
| sleGponProfileVoIPDetailSIPSessionTimer OBJECT-TYPE SIP Session Timer | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.88 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponProfileVoIPDetailSIPSessionTimeout OBJECT-TYPE SIP Session Timer Timeout | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.89 | Integer32 (0..65535) | read-only | current |
| sleGponProfileVoIPDetailSIPEndOfDigit OBJECT-TYPE SIP End of Digit | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.90 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponProfileVoIPDetailSIPEndSharpToken OBJECT-TYPE SIP End # Token | 1.3.6.1.4.1.6296.101.23.5.5.5.1.1.91 | INTEGER {hex(0), ascii(1)} | read-only | current |
| sleGponProfileVoIPDetailControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.5.5.2 | |||
| sleGponProfileVoIPDetailControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.5.5.5.2.1 | INTEGER {createProfile(1), destroylProfile(2), setFaxMode(3), setCodec1st(4), setCodec2nd(5), setCodec3rd(6), setCodec4th(7), setOobDtmf(8), setAnnouncementType(9), setJitterTarget(10), setJitterBuffMax(11), setEchoCancel(12), setPstnProto(13), setDtmfDigit(14), setHookFlashTimeMin(15), setHookFlashTimeMax(16), setSignalingCode(17), setRtpLocalPort(18), setRtpDscpMark(19), setRtpPiggybackEvent(20), setRtpToneEvent(21), setRtpDtmfEvent(22), setRtpCasEvent(23), setProtocol(24), setMgcPriServer(25), setMgcSecServer(26), setMgcVersion(27), setMgcFormat(28), setMgcMaxRetryTime(29), setMgcRetryAttempts(30), setMgcServiceChangeDelay(31), setMgcTerminationId(32), setMgcSoftswitch(33), setVoicemailServer(34), setVoicemailExpireTime(35), setReleaseTime(36), setRohTimer(37), setProxyServer(38), setOutboundProxyServer(39), setRegisterServer(40), setHostpartServer(41), setDns(42), setRegExpTime(43), setReregHeadStartTime(44), setSoftSwitch(45), setSipOptionTransmitCtl(46), setSipUriFormat(47), setCallerId(48), setCallWaiting(49), setCallProgressTransfer(50), setCallPresent(51), setDirectConnect(52), setDirectConnectUri(53), setBridgedLineAgentUri(54), setConferenceFactoryUri(55), setCancelCallWait(56), setCallHost(57), setCallPark(58), setCallerIdAct(59), setCallerIdDeact(60), setDoNotDisturbAct(61), setDoNotDisturbDeact(62), setDoNotDisturbPinChange(63), setEmergServiceNumber(64), setIntercomService(65), setDialPlanCritTimeOut(66), setDialPlanPartTimeOut(67), setDialPlanFormat(68), setSpecialLineService(69), setThreeWaySSWMixing(70), setDNSCachePolicy(71), setSIPTimer(72), setSessionTimer(73), setEndOfDigit(74), setEndSharpToken(75)} | read-write | current |
| sleGponProfileVoIPDetailControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.5.5.5.2.2 | SleControlStatusType | read-only | current |
| sleGponProfileVoIPDetailControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.5.5.5.2.3 | Gauge32 | read-write | current |
| sleGponProfileVoIPDetailControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.5.5.5.2.4 | TimeTicks | read-only | current |
| sleGponProfileVoIPDetailControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.5.5.5.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfileVoIPDetailControlIndex OBJECT-TYPE VoIP Profile Index | 1.3.6.1.4.1.6296.101.23.5.5.5.2.6 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPDetaiControllName OBJECT-TYPE The VoIp profile name. | 1.3.6.1.4.1.6296.101.23.5.5.5.2.7 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlFaxMode OBJECT-TYPE VoIP fax mode. | 1.3.6.1.4.1.6296.101.23.5.5.5.2.8 | INTEGER {passthru(0), t38(1)} | read-write | current |
| sleGponProfileVoIPDetailControlCodecType1st OBJECT-TYPE Codec type 1st | 1.3.6.1.4.1.6296.101.23.5.5.5.2.9 | INTEGER {pcmu(0), gsm(3), g723(4), dvi4and8k(5), dvi4and16k(6), lpc(7), pcma(8), g722(9), l16and2ch(10), l16and1h(11), qcelp(12), cn(13), mpa(14), g728(15), dvi4and11k(16), dvi4and22k(17), g729(18)} | read-write | current |
| sleGponProfileVoIPDetailControlCodecPeriod1st OBJECT-TYPE Packet Period Selection <10-30> ms (default 10ms) | 1.3.6.1.4.1.6296.101.23.5.5.5.2.10 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPDetailControlCodecSilenceSuppression1st OBJECT-TYPE Silence Suppression (0:off 1:on) | 1.3.6.1.4.1.6296.101.23.5.5.5.2.11 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPDetailControlCodecType2nd OBJECT-TYPE Codec type 2nd | 1.3.6.1.4.1.6296.101.23.5.5.5.2.12 | INTEGER {pcmu(0), gsm(3), g723(4), dvi4and8k(5), dvi4and16k(6), lpc(7), pcma(8), g722(9), l16and2ch(10), l16and1h(11), qcelp(12), cn(13), mpa(14), g728(15), dvi4and11k(16), dvi4and22k(17), g729(18)} | read-write | current |
| sleGponProfileVoIPDetailControlCodecPeriod2nd OBJECT-TYPE Packet Period Selection <10-30> ms (default 10ms) | 1.3.6.1.4.1.6296.101.23.5.5.5.2.13 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPDetailControlCodecSilenceSuppression2nd OBJECT-TYPE Silence Suppression (0:off 1:on) | 1.3.6.1.4.1.6296.101.23.5.5.5.2.14 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPDetailControlCodecType3rd OBJECT-TYPE Codec type 3rd | 1.3.6.1.4.1.6296.101.23.5.5.5.2.15 | INTEGER {pcmu(0), gsm(3), g723(4), dvi4and8k(5), dvi4and16k(6), lpc(7), pcma(8), g722(9), l16and2ch(10), l16and1h(11), qcelp(12), cn(13), mpa(14), g728(15), dvi4and11k(16), dvi4and22k(17), g729(18)} | read-write | current |
| sleGponProfileVoIPDetailControlCodecPeriod3rd OBJECT-TYPE Packet Period Selection <10-30> ms (default 10ms) | 1.3.6.1.4.1.6296.101.23.5.5.5.2.16 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPDetailControlCodecSilenceSuppression3rd OBJECT-TYPE Silence Suppression (0:off 1:on) | 1.3.6.1.4.1.6296.101.23.5.5.5.2.17 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPDetailControlCodecType4th OBJECT-TYPE Codec type 4th | 1.3.6.1.4.1.6296.101.23.5.5.5.2.18 | INTEGER {pcmu(0), gsm(3), g723(4), dvi4and8k(5), dvi4and16k(6), lpc(7), pcma(8), g722(9), l16and2ch(10), l16and1h(11), qcelp(12), cn(13), mpa(14), g728(15), dvi4and11k(16), dvi4and22k(17), g729(18)} | read-write | current |
| sleGponProfileVoIPDetailCodecControlPeriod4th OBJECT-TYPE Packet Period Selection <10-30> ms (default 10ms) | 1.3.6.1.4.1.6296.101.23.5.5.5.2.19 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPDetailControlCodecSilenceSuppression4th OBJECT-TYPE Silence Suppression (0:off 1:on) | 1.3.6.1.4.1.6296.101.23.5.5.5.2.20 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPDetailControlOobdtmf OBJECT-TYPE Out-of-band DMTF | 1.3.6.1.4.1.6296.101.23.5.5.5.2.21 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponProfileVoIPDetailControlAnnouncementType OBJECT-TYPE Announcement Type | 1.3.6.1.4.1.6296.101.23.5.5.5.2.22 | INTEGER {silence(1), reorderTone(2), fastBusy(3), voiceAnnouncement(4)} | read-write | current |
| sleGponProfileVoIPDetailControlJitterTarget OBJECT-TYPE Jitter target (milliseconds) | 1.3.6.1.4.1.6296.101.23.5.5.5.2.23 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPDetailControlJitterBuffMax OBJECT-TYPE Jitter Buffer Max | 1.3.6.1.4.1.6296.101.23.5.5.5.2.24 | INTEGER (0..65535) | read-write | current |
| sleGponProfileVoIPDetailControlEchoCancel OBJECT-TYPE Echo cancellation | 1.3.6.1.4.1.6296.101.23.5.5.5.2.25 | INTEGER {false(0), ture(1)} | read-write | current |
| sleGponProfileVoIPDetailControlPstnProtoVariant OBJECT-TYPE PSTN Protocol Variant | 1.3.6.1.4.1.6296.101.23.5.5.5.2.26 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPDetailControlDtmfDigitLevels OBJECT-TYPE DTMF digit Power Level configuration | 1.3.6.1.4.1.6296.101.23.5.5.5.2.27 | INTEGER (0..65535) | read-write | current |
| sleGponProfileVoIPDetailControlDtmfDigitDuration OBJECT-TYPE DTMF digit Power Duration configuration | 1.3.6.1.4.1.6296.101.23.5.5.5.2.28 | INTEGER (0..65535) | read-write | current |
| sleGponProfileVoIPDetailControlHookFlashTimeMin OBJECT-TYPE Hook Flash Duration Min | 1.3.6.1.4.1.6296.101.23.5.5.5.2.29 | INTEGER (0..65535) | read-write | current |
| sleGponProfileVoIPDetailControlHookFlashTimeMax OBJECT-TYPE Hook Flash Duration Max | 1.3.6.1.4.1.6296.101.23.5.5.5.2.30 | INTEGER (0..65535) | read-write | current |
| sleGponProfileVoIPDetailControlSignalingCode OBJECT-TYPE POTS-side Signalling | 1.3.6.1.4.1.6296.101.23.5.5.5.2.31 | INTEGER {loopStart(1), groundStart(2), loopReverseBattery(3), coinFirst(4), dialToneFirst(5), multiParty(6)} | read-write | current |
| sleGponProfileVoIPDetailControlRtpLocalPortMin OBJECT-TYPE RTP Local Port Min | 1.3.6.1.4.1.6296.101.23.5.5.5.2.32 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPDetailControlRtpLocalPortMax OBJECT-TYPE RTP Local Port Max | 1.3.6.1.4.1.6296.101.23.5.5.5.2.33 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPDetailControlRtpDscpMark OBJECT-TYPE RTP DSCP Mark | 1.3.6.1.4.1.6296.101.23.5.5.5.2.34 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPDetailControlRtpPiggybackEvent OBJECT-TYPE RTP Piggyback event | 1.3.6.1.4.1.6296.101.23.5.5.5.2.35 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponProfileVoIPDetailControlRtpToneEvent OBJECT-TYPE RTP Tone event | 1.3.6.1.4.1.6296.101.23.5.5.5.2.36 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponProfileVoIPDetailControlRtpDtmfEvent OBJECT-TYPE RTP DTMF event | 1.3.6.1.4.1.6296.101.23.5.5.5.2.37 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponProfileVoIPDetailControlRtpCasEvent OBJECT-TYPE The status of RTP CAS event | 1.3.6.1.4.1.6296.101.23.5.5.5.2.38 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponProfileVoIPDetailControlProtocol OBJECT-TYPE VoIP Protocol configuration | 1.3.6.1.4.1.6296.101.23.5.5.5.2.39 | INTEGER {none(0), sip(1), h248(2), mgcp(3)} | read-write | current |
| sleGponProfileVoIPDetailControlMgcPriServer OBJECT-TYPE The primary server name. | 1.3.6.1.4.1.6296.101.23.5.5.5.2.40 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlMgcSecServer OBJECT-TYPE The secondary server name. | 1.3.6.1.4.1.6296.101.23.5.5.5.2.41 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlMgcMsgVersion OBJECT-TYPE The message version. | 1.3.6.1.4.1.6296.101.23.5.5.5.2.42 | INTEGER (1..255) | read-write | current |
| sleGponProfileVoIPDetailControlMgcMsgFormat OBJECT-TYPE The message format. | 1.3.6.1.4.1.6296.101.23.5.5.5.2.43 | INTEGER {textLong(0), textShort(1), binary(2)} | read-write | current |
| sleGponProfileVoIPDetailControlMgcMaxRetryTime OBJECT-TYPE The max retry time. 65535: unused | 1.3.6.1.4.1.6296.101.23.5.5.5.2.44 | INTEGER (0..65535) | read-write | current |
| sleGponProfileVoIPDetailControlMgcMaxRetryAttempts OBJECT-TYPE The max retry attemption 65535: unused | 1.3.6.1.4.1.6296.101.23.5.5.5.2.45 | INTEGER (0..65535) | read-write | current |
| sleGponProfileVoIPDetailControlMgcSvcChangeDelay OBJECT-TYPE The service change delay 65535: unused | 1.3.6.1.4.1.6296.101.23.5.5.5.2.46 | INTEGER (0..65535) | read-write | current |
| sleGponProfileVoIPDetailControlMgcTerminationId OBJECT-TYPE The termination id. | 1.3.6.1.4.1.6296.101.23.5.5.5.2.47 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlMgcSoftswitch OBJECT-TYPE The soft switch | 1.3.6.1.4.1.6296.101.23.5.5.5.2.48 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlVoicemailServer OBJECT-TYPE Voicemail server SIP URI | 1.3.6.1.4.1.6296.101.23.5.5.5.2.49 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlVoicemmailExpireTime OBJECT-TYPE Voicemail Subscription Expiration Time | 1.3.6.1.4.1.6296.101.23.5.5.5.2.50 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPDetailControlReleaseTime OBJECT-TYPE Release timer | 1.3.6.1.4.1.6296.101.23.5.5.5.2.51 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPDetailControlRohTimer OBJECT-TYPE ROH timer | 1.3.6.1.4.1.6296.101.23.5.5.5.2.52 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPDetailControlProxyServer OBJECT-TYPE Proxy server address | 1.3.6.1.4.1.6296.101.23.5.5.5.2.53 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlOutboundProxyServer OBJECT-TYPE Outbound proxy address | 1.3.6.1.4.1.6296.101.23.5.5.5.2.54 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlRegisterServer OBJECT-TYPE Registrar server address | 1.3.6.1.4.1.6296.101.23.5.5.5.2.55 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlHostPartServer OBJECT-TYPE Host part server address | 1.3.6.1.4.1.6296.101.23.5.5.5.2.56 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlPriDns OBJECT-TYPE Primary DNS Server | 1.3.6.1.4.1.6296.101.23.5.5.5.2.57 | IpAddress | read-write | current |
| sleGponProfileVoIPDetailControlSecDns OBJECT-TYPE Secondary DNS Server | 1.3.6.1.4.1.6296.101.23.5.5.5.2.58 | IpAddress | read-write | current |
| sleGponProfileVoIPDetailControlRegExpTime OBJECT-TYPE Registration expiration time | 1.3.6.1.4.1.6296.101.23.5.5.5.2.59 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPDetailControlReregHeadStartTime OBJECT-TYPE Registration head start time | 1.3.6.1.4.1.6296.101.23.5.5.5.2.60 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPDetailControlSoftSwitchVendor OBJECT-TYPE Softswitch Vendor name | 1.3.6.1.4.1.6296.101.23.5.5.5.2.61 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlSipOptionTransmitCtl OBJECT-TYPE Transmit control | 1.3.6.1.4.1.6296.101.23.5.5.5.2.62 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponProfileVoIPDetailControlSipUriFormat OBJECT-TYPE URI format | 1.3.6.1.4.1.6296.101.23.5.5.5.2.63 | INTEGER {telUri(0), sipUri(1)} | read-write | current |
| sleGponProfileVoIPDetailControlCallerId OBJECT-TYPE Caller ID feature | 1.3.6.1.4.1.6296.101.23.5.5.5.2.64 | Bits {callNumber(0), callName(1), cidBlocking(2), cidNumber(3), cidName(4), acr(5)} | read-write | current |
| sleGponProfileVoIPDetailControlCallWaiting OBJECT-TYPE Call waiting features | 1.3.6.1.4.1.6296.101.23.5.5.5.2.65 | Bits {callFeature(0), cidAnnounce(1)} | read-write | current |
| sleGponProfileVoIPDetailControlCallProgressTransfer OBJECT-TYPE Call progress or transfer features | 1.3.6.1.4.1.6296.101.23.5.5.5.2.66 | Bits {threeWay(0), callTransfer(1), callHold(2), callPark(3), notDisturb(4), flashEmergCall(5), emergOriginatingHold(6)} | read-write | current |
| sleGponProfileVoIPDetailControlCallPresent OBJECT-TYPE Call presentation features | 1.3.6.1.4.1.6296.101.23.5.5.5.2.67 | Bits {splashRing(0), dialTone(1), visualIndicate(2), callForward(3)} | read-write | current |
| sleGponProfileVoIPDetailControlDirectConnect OBJECT-TYPE Direct connect feature | 1.3.6.1.4.1.6296.101.23.5.5.5.2.68 | INTEGER {disable(0), enable(1), delayOption(2)} | read-write | current |
| sleGponProfileVoIPDetailControlDirectConnectUri OBJECT-TYPE Direct connect URI | 1.3.6.1.4.1.6296.101.23.5.5.5.2.69 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlBridgedLineAgentUri OBJECT-TYPE Bridged line agent URI | 1.3.6.1.4.1.6296.101.23.5.5.5.2.70 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlConferenceFactoryUri OBJECT-TYPE Conference factory URI | 1.3.6.1.4.1.6296.101.23.5.5.5.2.71 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlCancelCallWait OBJECT-TYPE Cancel call waiting | 1.3.6.1.4.1.6296.101.23.5.5.5.2.72 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlCallHold OBJECT-TYPE Call hold | 1.3.6.1.4.1.6296.101.23.5.5.5.2.73 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlCallPark OBJECT-TYPE Call park | 1.3.6.1.4.1.6296.101.23.5.5.5.2.74 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlCallerIdAct OBJECT-TYPE Caller ID activate | 1.3.6.1.4.1.6296.101.23.5.5.5.2.75 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlCallerIdDeact OBJECT-TYPE Caller ID deactivate | 1.3.6.1.4.1.6296.101.23.5.5.5.2.76 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlDoNotDisturbAct OBJECT-TYPE Do not disturb activation | 1.3.6.1.4.1.6296.101.23.5.5.5.2.77 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlDoNotDisturbDeact OBJECT-TYPE Do not disturb deactivation | 1.3.6.1.4.1.6296.101.23.5.5.5.2.78 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlDoNotDisturbPinChange OBJECT-TYPE Do not disturb PIN change | 1.3.6.1.4.1.6296.101.23.5.5.5.2.79 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlEmergServiceNumber OBJECT-TYPE Emergency service number | 1.3.6.1.4.1.6296.101.23.5.5.5.2.80 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlIntercomService OBJECT-TYPE Intercom service | 1.3.6.1.4.1.6296.101.23.5.5.5.2.81 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlDialplanCritTimeout OBJECT-TYPE dial-plan crit-timeout TIMEOUT (ms) | 1.3.6.1.4.1.6296.101.23.5.5.5.2.82 | INTEGER (0..65535) | read-write | current |
| sleGponProfileVoIPDetailControlDialplanPartTimeout OBJECT-TYPE dial-plan part-timeout TIMEOUT (ms) | 1.3.6.1.4.1.6296.101.23.5.5.5.2.83 | INTEGER (0..65535) | read-write | current |
| sleGponProfileVoIPDetailControlDialplanFormat OBJECT-TYPE dial-plan format (h248|nsc|vendor) | 1.3.6.1.4.1.6296.101.23.5.5.5.2.84 | INTEGER {h248(1), nsc(2), vendor(3)} | read-write | current |
| sleGponProfileVoIPDetailControlSpecialLineService OBJECT-TYPE Special Line Service | 1.3.6.1.4.1.6296.101.23.5.5.5.2.85 | INTEGER {disable(0), enableHotLine(1), enableWarmLine(2)} | read-write | current |
| sleGponProfileVoIPDetailControlWarmLineTimeout OBJECT-TYPE Warm Line Waiting Time | 1.3.6.1.4.1.6296.101.23.5.5.5.2.86 | Integer32 (0..30) | read-write | current |
| sleGponProfileVoIPDetailControlLineNumber OBJECT-TYPE Special Line Number | 1.3.6.1.4.1.6296.101.23.5.5.5.2.87 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailControlThreeWaySSWMixing OBJECT-TYPE 3Way Call Voice Mixing | 1.3.6.1.4.1.6296.101.23.5.5.5.2.88 | INTEGER {server(0), client(1)} | read-write | current |
| sleGponProfileVoIPDetailControlSIPDNSCache OBJECT-TYPE SIP Stack DNS Cache update policy | 1.3.6.1.4.1.6296.101.23.5.5.5.2.89 | INTEGER {ttl(0), permanent(1)} | read-write | current |
| sleGponProfileVoIPDetailControlSIPTimerT1 OBJECT-TYPE First Response Wait Time | 1.3.6.1.4.1.6296.101.23.5.5.5.2.90 | Integer32 (0..2500) | read-write | current |
| sleGponProfileVoIPDetailControlSIPTimerT2 OBJECT-TYPE Next Increase Waiting Time | 1.3.6.1.4.1.6296.101.23.5.5.5.2.91 | Integer32 (0..5000) | read-write | current |
| sleGponProfileVoIPDetailControlSIPTimerTd OBJECT-TYPE Max Transaction Time | 1.3.6.1.4.1.6296.101.23.5.5.5.2.92 | Integer32 (5000..65535) | read-write | current |
| sleGponProfileVoIPDetailControlSIPSessionTimer OBJECT-TYPE SIP Session Timer | 1.3.6.1.4.1.6296.101.23.5.5.5.2.93 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponProfileVoIPDetailControlSIPSessionTimeout OBJECT-TYPE SIP Session Timer Timeout | 1.3.6.1.4.1.6296.101.23.5.5.5.2.94 | Integer32 (0..65535) | read-write | current |
| sleGponProfileVoIPDetailControlSIPEndOfDigit OBJECT-TYPE SIP End of Digit | 1.3.6.1.4.1.6296.101.23.5.5.5.2.95 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponProfileVoIPDetailControlSIPEndSharpToken OBJECT-TYPE SIP End # Token. | 1.3.6.1.4.1.6296.101.23.5.5.5.2.96 | INTEGER {hex(0), ascii(1)} | read-write | current |
| sleGponProfileVoIPDetailNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.5.5.3 | |||
| sleGponProfileVoIPDetailDialPlan OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.5.6 | |||
| sleGponProfileVoIPDetailDialPlanTable OBJECT-TYPE sleGponProfileVoIPDetailDialPlanTable | 1.3.6.1.4.1.6296.101.23.5.5.6.1 | not-accessible | current | |
| sleGponProfileVoIPDetailDialPlanEntry OBJECT-TYPE key: sleGponProfileVoIPDetailIndex, sleGponProfileVoIPDetailDialPlanTableIndex | 1.3.6.1.4.1.6296.101.23.5.5.6.1.1 | not-accessible | current | |
| sleGponProfileVoIPDetailDialPlanTableIndex OBJECT-TYPE The Dial Plan Table Index. | 1.3.6.1.4.1.6296.101.23.5.5.6.1.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponProfileVoIPDetailDialPlanTableToken OBJECT-TYPE The Dial Plan Table Name. | 1.3.6.1.4.1.6296.101.23.5.5.6.1.1.2 | OCTET STRING | read-only | current |
| sleGponProfileVoIPDetailDialPlanControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.5.6.2 | |||
| sleGponProfileVoIPDetailDialPlanControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.5.5.6.2.1 | INTEGER {addDialPlanTable(1), delDialPlanTable(2)} | read-write | current |
| sleGponProfileVoIPDetailDialPlanControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.5.5.6.2.2 | SleControlStatusType | read-write | current |
| sleGponProfileVoIPDetailDialPlanControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.5.5.6.2.3 | Gauge32 | read-write | current |
| sleGponProfileVoIPDetailDialPlanControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.5.5.6.2.4 | TimeTicks | read-write | current |
| sleGponProfileVoIPDetailDialPlanControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.5.5.6.2.5 | SleControlRequestResultType | read-write | current |
| sleGponProfileVoIPDetailDialPlanControlProfileIndex OBJECT-TYPE sleGponProfileVoIPDetailIndex | 1.3.6.1.4.1.6296.101.23.5.5.6.2.6 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPDetailDialPlanControlTableIndex OBJECT-TYPE The Dial Plan Table Index. | 1.3.6.1.4.1.6296.101.23.5.5.6.2.7 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPDetailDialPlanControlTableToken OBJECT-TYPE The Dial Plan Table Name. | 1.3.6.1.4.1.6296.101.23.5.5.6.2.8 | OCTET STRING | read-write | current |
| sleGponProfileVoIPDetailDialPlanNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.5.6.3 | |||
| sleGponProfileVoIPService OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.5.7 | |||
| sleGponProfileVoIPServiceTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.7.1 | not-accessible | current | |
| sleGponProfileVoIPServiceEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.7.1.1 | not-accessible | current | |
| sleGponProfileVoIPServiceIndex OBJECT-TYPE The VoIP service index | 1.3.6.1.4.1.6296.101.23.5.5.7.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfileVoIPServiceMgcMessageId OBJECT-TYPE The MGC message index. | 1.3.6.1.4.1.6296.101.23.5.5.7.1.1.2 | OCTET STRING | read-only | current |
| sleGponProfileVoIPServiceControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.5.7.2 | |||
| sleGponProfileVoIPServiceControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.5.5.7.2.1 | INTEGER {setMgcMessage(1)} | read-write | current |
| sleGponProfileVoIPServiceControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.5.5.7.2.2 | SleControlStatusType | read-only | current |
| sleGponProfileVoIPServiceControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.5.5.7.2.3 | Gauge32 | read-write | current |
| sleGponProfileVoIPServiceControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.5.5.7.2.4 | TimeTicks | read-only | current |
| sleGponProfileVoIPServiceControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.5.5.7.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfileVoIPServiceControlOltId OBJECT-TYPE The OLT index. | 1.3.6.1.4.1.6296.101.23.5.5.7.2.6 | INTEGER (1..2147483647) | read-write | current |
| sleGponProfileVoIPServiceControlOnuId OBJECT-TYPE The ONU index. | 1.3.6.1.4.1.6296.101.23.5.5.7.2.7 | INTEGER (1..65535) | read-write | current |
| sleGponProfileVoIPServiceControlIndex OBJECT-TYPE The VoIP service index | 1.3.6.1.4.1.6296.101.23.5.5.7.2.8 | Integer32 (1..65535) | read-write | current |
| sleGponProfileVoIPServiceControlMgcMessageId OBJECT-TYPE The MGC message index. | 1.3.6.1.4.1.6296.101.23.5.5.7.2.9 | OCTET STRING | read-write | current |
| sleGponProfileVoIPServiceNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.5.7.3 | |||
| sleGponServiceProfile OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.6 | |||
| sleGponServiceProfileTable OBJECT-TYPE sleGponServiceProfileTable | 1.3.6.1.4.1.6296.101.23.5.6.1 | not-accessible | current | |
| sleGponServiceProfileEntry OBJECT-TYPE key: sleGponServiceProfileIndex | 1.3.6.1.4.1.6296.101.23.5.6.1.1 | not-accessible | current | |
| sleGponServiceProfileIndex OBJECT-TYPE The profile index. | 1.3.6.1.4.1.6296.101.23.5.6.1.1.1 | Integer32 (1..65535) | read-write | current |
| sleGponServiceProfileModelName OBJECT-TYPE The Service Profile Model name. | 1.3.6.1.4.1.6296.101.23.5.6.1.1.2 | OCTET STRING | read-only | current |
| sleGponServiceProfileProfileName OBJECT-TYPE The Service Profile Name. | 1.3.6.1.4.1.6296.101.23.5.6.1.1.3 | OCTET STRING | read-only | current |
| sleGponServiceProfileControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.6.2 | |||
| sleGponServiceProfileControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.5.6.2.1 | INTEGER {setGponServiceProfileModel(1)} | read-write | current |
| sleGponServiceProfileControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.5.6.2.2 | SleControlStatusType | read-write | current |
| sleGponServiceProfileControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.5.6.2.3 | Gauge32 | read-write | current |
| sleGponServiceProfileControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.5.6.2.4 | TimeTicks | read-write | current |
| sleGponServiceProfileControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.5.6.2.5 | SleControlRequestResultType | read-write | current |
| sleGponServiceProfileControlModelName OBJECT-TYPE The Service Profile Model name. | 1.3.6.1.4.1.6296.101.23.5.6.2.6 | OCTET STRING | read-write | current |
| sleGponServiceProfileControlProfileName OBJECT-TYPE The Service Profile Name. | 1.3.6.1.4.1.6296.101.23.5.6.2.7 | OCTET STRING | read-write | current |
| sleGponServiceProfileNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.6.3 | |||
| sleGponProfileTdm OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.7 | |||
| sleGponProfileTdmPwMt OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.7.1 | |||
| sleGponProfileTdmPwMtTable OBJECT-TYPE sleGponProfileTdmPwMtTable | 1.3.6.1.4.1.6296.101.23.5.7.1.1 | not-accessible | current | |
| sleGponProfileTdmPwMtEntry OBJECT-TYPE key: sleGponProfileTdmPwMtIndex | 1.3.6.1.4.1.6296.101.23.5.7.1.1.1 | not-accessible | current | |
| sleGponProfileTdmPwMtIndex OBJECT-TYPE PW Maintenance Profile Index | 1.3.6.1.4.1.6296.101.23.5.7.1.1.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponProfileTdmPwMtName OBJECT-TYPE PW Maintenance Profile Name | 1.3.6.1.4.1.6296.101.23.5.7.1.1.1.2 | OCTET STRING | read-only | current |
| sleGponProfileTdmPwMtMaxDepth OBJECT-TYPE Configure Jitter buffer maximum depth | 1.3.6.1.4.1.6296.101.23.5.7.1.1.1.3 | INTEGER (1..65535) | read-only | current |
| sleGponProfileTdmPwMtDesiredDepth OBJECT-TYPE Configure Jitter buffer desired depth | 1.3.6.1.4.1.6296.101.23.5.7.1.1.1.4 | INTEGER (1..65535) | read-only | current |
| sleGponProfileTdmPwMtFillPolicy OBJECT-TYPE Configure Fill Payload Bit Pattern | 1.3.6.1.4.1.6296.101.23.5.7.1.1.1.5 | INTEGER {vendorSpecific(0), playOutAis(1), playOutAll1S(2), playOutAll0S(3), repeatPrevData(4), playOutDs1Idle(5)} | read-only | current |
| sleGponProfileTdmPwMtMisconnectDeclarePolicy OBJECT-TYPE Configure Misconnected packets declaration policy | 1.3.6.1.4.1.6296.101.23.5.7.1.1.1.6 | INTEGER (0 | 1..100) | read-only | current |
| sleGponProfileTdmPwMtMisconnectClearPolicy OBJECT-TYPE Configure Misconnected packets clear policy | 1.3.6.1.4.1.6296.101.23.5.7.1.1.1.7 | INTEGER (0..99 | 255) | read-only | current |
| sleGponProfileTdmPwMtLossDeclarePolicy OBJECT-TYPE Configure Loss of packets declaration policy | 1.3.6.1.4.1.6296.101.23.5.7.1.1.1.8 | INTEGER (0 | 1..100) | read-only | current |
| sleGponProfileTdmPwMtLossClearPolicy OBJECT-TYPE Configure Loss of packets clear policy | 1.3.6.1.4.1.6296.101.23.5.7.1.1.1.9 | INTEGER (0..99 | 255) | read-only | current |
| sleGponProfileTdmPwMtBuffUnderrunDeclarePolicy OBJECT-TYPE Configure Buffer overrun/underrun declaration policy | 1.3.6.1.4.1.6296.101.23.5.7.1.1.1.10 | INTEGER (0 | 1..100) | read-only | current |
| sleGponProfileTdmPwMtBuffUnderrunClearPolicy OBJECT-TYPE Configure Buffer overrun/underrun clear policy | 1.3.6.1.4.1.6296.101.23.5.7.1.1.1.11 | INTEGER (0..99 | 255) | read-only | current |
| sleGponProfileTdmPwMtMalformedDeclarePolicy OBJECT-TYPE Configure Malformed packets declaration policy | 1.3.6.1.4.1.6296.101.23.5.7.1.1.1.12 | INTEGER (0 | 1..100) | read-only | current |
| sleGponProfileTdmPwMtMalformedClearPolicy OBJECT-TYPE Configure Malformed packets clear policy | 1.3.6.1.4.1.6296.101.23.5.7.1.1.1.13 | INTEGER (0..99 | 255) | read-only | current |
| sleGponProfileTdmPwMtRBitTransmitPolicy OBJECT-TYPE Configure R-bit transmit set policy | 1.3.6.1.4.1.6296.101.23.5.7.1.1.1.14 | INTEGER (0 | 1..255) | read-only | current |
| sleGponProfileTdmPwMtRBitReceivePolicy OBJECT-TYPE Configure R-bit receive policy | 1.3.6.1.4.1.6296.101.23.5.7.1.1.1.15 | INTEGER {none(0), playOut(1), sendIdle(2)} | read-only | current |
| sleGponProfileTdmPwMtLBitReceivePolicy OBJECT-TYPE Configure L-bit receive policy | 1.3.6.1.4.1.6296.101.23.5.7.1.1.1.16 | INTEGER {playOut(0), repeatLastPacket(1), sendIdle(2)} | read-only | current |
| sleGponProfileTdmPwMtSesThreshold OBJECT-TYPE Configure SES threshold | 1.3.6.1.4.1.6296.101.23.5.7.1.1.1.17 | INTEGER (1..65535) | read-only | current |
| sleGponProfileTdmPwMtControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.7.1.2 | |||
| sleGponProfileTdmPwMtControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.5.7.1.2.1 | INTEGER {createProfile(1), destroyProfile(2), setMaxDepth(3), setDesiredDepth(4), setFillPolicy(5), setMisconnectDeclarePolicy(6), setMisconnectClearPolicy(7), setLossDeclarePolicy(8), setLossClearPolicy(9), setBuffUnderrunDeclarePolicy(10), setbuffUnderrunClearPolicy(11), setMalformedDeclarePolicy(12), setMalformedClearPolicy(13), setRBitTransmitPolicy(14), setRBitReceivePolicy(15), setLBitReceivePolicy(16), setSesThreshold(17)} | read-write | current |
| sleGponProfileTdmPwMtControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.5.7.1.2.2 | SleControlStatusType | read-only | current |
| sleGponProfileTdmPwMtControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.5.7.1.2.3 | Gauge32 | read-write | current |
| sleGponProfileTdmPwMtControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.5.7.1.2.4 | TimeTicks | read-only | current |
| sleGponProfileTdmPwMtControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.5.7.1.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfileTdmPwMtControlIndex OBJECT-TYPE PW Maintenance Profile Index | 1.3.6.1.4.1.6296.101.23.5.7.1.2.6 | INTEGER (1..65535) | read-write | current |
| sleGponProfileTdmPwMtControlName OBJECT-TYPE PW Maintenance Profile Name | 1.3.6.1.4.1.6296.101.23.5.7.1.2.7 | OCTET STRING | read-write | current |
| sleGponProfileTdmPwMtControlMaxDepth OBJECT-TYPE Configure Jitter buffer maximum depth | 1.3.6.1.4.1.6296.101.23.5.7.1.2.8 | INTEGER (1..65535) | read-write | current |
| sleGponProfileTdmPwMtControlDesiredDepth OBJECT-TYPE Configure Jitter buffer desired depth | 1.3.6.1.4.1.6296.101.23.5.7.1.2.9 | INTEGER (1..65535) | read-write | current |
| sleGponProfileTdmPwMtControlFillPolicy OBJECT-TYPE Configure Fill Payload Bit Pattern | 1.3.6.1.4.1.6296.101.23.5.7.1.2.10 | INTEGER {vendorSpecific(0), playOutAis(1), playOutAll1S(2), playOutAll0S(3), repeatPrevData(4), playOutDs1Idle(5)} | read-write | current |
| sleGponProfileTdmPwMtControlMisconnectDeclarePolicy OBJECT-TYPE Configure Misconnected packets declaration policy | 1.3.6.1.4.1.6296.101.23.5.7.1.2.11 | INTEGER (0 | 1..100) | read-write | current |
| sleGponProfileTdmPwMtControlMisconnectClearPolicy OBJECT-TYPE Configure Misconnected packets clear policy | 1.3.6.1.4.1.6296.101.23.5.7.1.2.12 | INTEGER (0..99 | 255) | read-write | current |
| sleGponProfileTdmPwMtControlLossDeclarePolicy OBJECT-TYPE Configure Loss of packets declaration policy | 1.3.6.1.4.1.6296.101.23.5.7.1.2.13 | INTEGER (0 | 1..100) | read-write | current |
| sleGponProfileTdmPwMtControlLossClearPolicy OBJECT-TYPE Configure Loss of packets clear policy | 1.3.6.1.4.1.6296.101.23.5.7.1.2.14 | INTEGER (0..99 | 255) | read-write | current |
| sleGponProfileTdmPwMtControlBuffUnderrunDeclarePolicy OBJECT-TYPE Configure Buffer overrun/underrun declaration policy | 1.3.6.1.4.1.6296.101.23.5.7.1.2.15 | INTEGER (0 | 1..100) | read-write | current |
| sleGponProfileTdmPwMtControlBuffUnderrunClearPolicy OBJECT-TYPE Configure Buffer overrun/underrun clear policy | 1.3.6.1.4.1.6296.101.23.5.7.1.2.16 | INTEGER (0..99 | 255) | read-write | current |
| sleGponProfileTdmPwMtControlMalformedDeclarePolicy OBJECT-TYPE Configure Malformed packets declaration policy | 1.3.6.1.4.1.6296.101.23.5.7.1.2.17 | INTEGER (0 | 1..100) | read-write | current |
| sleGponProfileTdmPwMtControlMalformedClearPolicy OBJECT-TYPE Configure Malformed packets clear policy | 1.3.6.1.4.1.6296.101.23.5.7.1.2.18 | INTEGER (0..99 | 255) | read-write | current |
| sleGponProfileTdmPwMtControlRBitTransmitPolicy OBJECT-TYPE Configure R-bit transmit set policy | 1.3.6.1.4.1.6296.101.23.5.7.1.2.19 | INTEGER (0 | 1..255) | read-write | current |
| sleGponProfileTdmPwMtControlRBitReceivePolicy OBJECT-TYPE Configure R-bit receive policy | 1.3.6.1.4.1.6296.101.23.5.7.1.2.20 | INTEGER {none(0), playOut(1), sendIdle(2)} | read-write | current |
| sleGponProfileTdmPwMtControlLBitReceivePolicy OBJECT-TYPE Configure L-bit receive policy | 1.3.6.1.4.1.6296.101.23.5.7.1.2.21 | INTEGER {playOut(0), repeatLastPacket(1), sendIdle(2)} | read-write | current |
| sleGponProfileTdmPwMtControlSesThreshold OBJECT-TYPE Configure SES threshold | 1.3.6.1.4.1.6296.101.23.5.7.1.2.22 | INTEGER (1..65535) | read-write | current |
| sleGponProfileTdmPwMtNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.7.1.3 | |||
| sleGponProfileTdmPw OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.7.2 | |||
| sleGponProfileTdmPwTable OBJECT-TYPE sleGponProfileTdmPwTable | 1.3.6.1.4.1.6296.101.23.5.7.2.1 | not-accessible | current | |
| sleGponProfileTdmPwEntry OBJECT-TYPE key: sleGponProfileTdmPwIndex | 1.3.6.1.4.1.6296.101.23.5.7.2.1.1 | not-accessible | current | |
| sleGponProfileTdmPwIndex OBJECT-TYPE Tdm pw index | 1.3.6.1.4.1.6296.101.23.5.7.2.1.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponProfileTdmPwName OBJECT-TYPE TDM pw profile name | 1.3.6.1.4.1.6296.101.23.5.7.2.1.1.2 | OCTET STRING | read-only | current |
| sleGponProfileTdmPwServiceType OBJECT-TYPE Configure Basic Service Type | 1.3.6.1.4.1.6296.101.23.5.7.2.1.1.3 | INTEGER {unstructured(0), octetAlignedUnstructured(1), structured(2)} | read-only | current |
| sleGponProfileTdmPwSignalling OBJECT-TYPE Configure Signalling | 1.3.6.1.4.1.6296.101.23.5.7.2.1.1.4 | INTEGER {noSignalling(0), casCarryPacket(1), casCarryChannel(2)} | read-only | current |
| sleGponProfileTdmPwPayloadSize OBJECT-TYPE Configure Payload bytes per packet | 1.3.6.1.4.1.6296.101.23.5.7.2.1.1.5 | INTEGER (0..65535) | read-only | current |
| sleGponProfileTdmPwPayloadEncapulationDelay OBJECT-TYPE Configure Payload Encapsulation Delay (unit :ms) | 1.3.6.1.4.1.6296.101.23.5.7.2.1.1.6 | INTEGER (0..65535) | read-only | current |
| sleGponProfileTdmPwTimingMode OBJECT-TYPE Configure Timing Mode of the TDM service | 1.3.6.1.4.1.6296.101.23.5.7.2.1.1.7 | INTEGER {network(0), differential(1), adaptive(2), loop(3)} | read-only | current |
| sleGponProfileTdmPwRtpClockRefernce OBJECT-TYPE Configure RTP Clock Reference | 1.3.6.1.4.1.6296.101.23.5.7.2.1.1.8 | INTEGER (0..65535) | read-only | current |
| sleGponProfileTdmPwRtpTimeStampMode OBJECT-TYPE Configure RTP Time Stamp Mode | 1.3.6.1.4.1.6296.101.23.5.7.2.1.1.9 | INTEGER {unknown(0), absolute(1), differential(2)} | read-only | current |
| sleGponProfileTdmPwRtpPayloadChannel OBJECT-TYPE Configure RTP Payload Type | 1.3.6.1.4.1.6296.101.23.5.7.2.1.1.10 | INTEGER (0..65535) | read-only | current |
| sleGponProfileTdmPwRtpPayloadSignalling OBJECT-TYPE Configure RTP Payload Signalling | 1.3.6.1.4.1.6296.101.23.5.7.2.1.1.11 | INTEGER (0..65535) | read-only | current |
| sleGponProfileTdmPwRtpSyncSourceChannel OBJECT-TYPE Configure RTP Synchronization Source | 1.3.6.1.4.1.6296.101.23.5.7.2.1.1.12 | INTEGER (0..65535) | read-only | current |
| sleGponProfileTdmPwRtpSyncSourceSignalling OBJECT-TYPE Configure RTP Synchronization Source Signalling | 1.3.6.1.4.1.6296.101.23.5.7.2.1.1.13 | INTEGER (0..65535) | read-only | current |
| sleGponProfileTdmPwRtpExpectPayloadChannel OBJECT-TYPE Configure Expected RTP Payload Type | 1.3.6.1.4.1.6296.101.23.5.7.2.1.1.14 | INTEGER (0..65535) | read-only | current |
| sleGponProfileTdmPwRtpExpectPaloadSignalling OBJECT-TYPE Configure Expected RTP Payload Signalling | 1.3.6.1.4.1.6296.101.23.5.7.2.1.1.15 | INTEGER (0..65535) | read-only | current |
| sleGponProfileTdmPwRtpExpectSyncSourceChannel OBJECT-TYPE Configure Expected RTP Synchronization Source | 1.3.6.1.4.1.6296.101.23.5.7.2.1.1.16 | INTEGER (0..65535) | read-only | current |
| sleGponProfileTdmPwRtpExpectSyncSourceSignalling OBJECT-TYPE Configure Expected RTP Synchronization Source Signalling | 1.3.6.1.4.1.6296.101.23.5.7.2.1.1.17 | INTEGER (0..65535) | read-only | current |
| sleGponProfileTdmPwMtProfileName OBJECT-TYPE Configure PW Maintenance Profile | 1.3.6.1.4.1.6296.101.23.5.7.2.1.1.18 | OCTET STRING | read-only | current |
| sleGponProfileTdmPwControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.7.2.2 | |||
| sleGponProfileTdmPwControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.5.7.2.2.1 | INTEGER {createProfile(1), destroyProfile(2), setServiceType(3), setSignalling(4), setPayloadSize(5), setPayloadEncapsulationDelay(6), setTimingMode(7), setRtpClockReference(8), setRtpTimeStampmode(9), setRtpPayloadType(10), setRtpSyncSource(11), setRtpExpectPayloadType(12), setRtpExpectSyncSource(13), setMtProfile(14)} | read-write | current |
| sleGponProfileTdmPwControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.5.7.2.2.2 | SleControlStatusType | read-only | current |
| sleGponProfileTdmPwControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.5.7.2.2.3 | Gauge32 | read-write | current |
| sleGponProfileTdmPwControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.5.7.2.2.4 | TimeTicks | read-only | current |
| sleGponProfileTdmPwControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.5.7.2.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfileTdmPwControlIndex OBJECT-TYPE Tdm pw index | 1.3.6.1.4.1.6296.101.23.5.7.2.2.6 | INTEGER (0..65535) | read-write | current |
| sleGponProfileTdmPwControlName OBJECT-TYPE TDM pw profile name | 1.3.6.1.4.1.6296.101.23.5.7.2.2.7 | OCTET STRING | read-write | current |
| sleGponProfileTdmPwControlServiceType OBJECT-TYPE Configure Basic Service Type | 1.3.6.1.4.1.6296.101.23.5.7.2.2.8 | INTEGER {unstructured(0), octetAlignedUnstructured(1), structured(2)} | read-write | current |
| sleGponProfileTdmPwControlSignalling OBJECT-TYPE Configure Signalling | 1.3.6.1.4.1.6296.101.23.5.7.2.2.9 | INTEGER {noSignalling(0), casCarryPacket(1), casCarryChannel(2)} | read-write | current |
| sleGponProfileTdmPwControlPayloadSize OBJECT-TYPE Configure Payload bytes per packet | 1.3.6.1.4.1.6296.101.23.5.7.2.2.10 | INTEGER (0..65535) | read-write | current |
| sleGponProfileTdmPwControlPayloadEncapulationDelay OBJECT-TYPE Configure Payload Encapsulation Delay (unit :ms) | 1.3.6.1.4.1.6296.101.23.5.7.2.2.11 | INTEGER (0..65535) | read-write | current |
| sleGponProfileTdmPwControlTimingMode OBJECT-TYPE Configure Timing Mode of the TDM service | 1.3.6.1.4.1.6296.101.23.5.7.2.2.12 | INTEGER {network(0), absolute(1), differential(2)} | read-write | current |
| sleGponProfileTdmPwControlRtpClockRefernce OBJECT-TYPE Configure RTP Clock Reference | 1.3.6.1.4.1.6296.101.23.5.7.2.2.13 | INTEGER (0..65535) | read-write | current |
| sleGponProfileTdmPwControlRtpTimeStampMode OBJECT-TYPE Configure RTP Time Stamp Mode | 1.3.6.1.4.1.6296.101.23.5.7.2.2.14 | INTEGER {unknown(0), absolute(1), differential(2)} | read-write | current |
| sleGponProfileTdmPwControlRtpPayloadChannel OBJECT-TYPE Configure RTP Payload Type | 1.3.6.1.4.1.6296.101.23.5.7.2.2.15 | INTEGER (0..65535) | read-write | current |
| sleGponProfileTdmPwControlRtpPayloadSignalling OBJECT-TYPE Configure RTP Payload Signalling | 1.3.6.1.4.1.6296.101.23.5.7.2.2.16 | INTEGER (0..65535) | read-write | current |
| sleGponProfileTdmPwControlRtpSyncSourceChannel OBJECT-TYPE Configure RTP Synchronization Source | 1.3.6.1.4.1.6296.101.23.5.7.2.2.17 | INTEGER (0..65535) | read-write | current |
| sleGponProfileTdmPwControlRtpSyncSourceSignalling OBJECT-TYPE Configure RTP Synchronization Source Signalling | 1.3.6.1.4.1.6296.101.23.5.7.2.2.18 | INTEGER (0..65535) | read-write | current |
| sleGponProfileTdmPwControlRtpExpectPayloadChannel OBJECT-TYPE Configure Expected RTP Payload Type | 1.3.6.1.4.1.6296.101.23.5.7.2.2.19 | INTEGER (0..65535) | read-write | current |
| sleGponProfileTdmPwControlRtpExpectPaloadSignalling OBJECT-TYPE Configure Expected RTP Payload Signalling | 1.3.6.1.4.1.6296.101.23.5.7.2.2.20 | INTEGER (0..65535) | read-write | current |
| sleGponProfileTdmPwControlRtpExpectSyncSourceChannel OBJECT-TYPE Configure Expected RTP Synchronization Source | 1.3.6.1.4.1.6296.101.23.5.7.2.2.21 | INTEGER (0..65535) | read-write | current |
| sleGponProfileTdmPwControlRtpExpectSyncSourceSignalling OBJECT-TYPE Configure Expected RTP Synchronization Source Signalling | 1.3.6.1.4.1.6296.101.23.5.7.2.2.22 | INTEGER (0..65535) | read-write | current |
| sleGponProfileTdmPwControlMtProfileName OBJECT-TYPE Configure PW Maintenance Profile | 1.3.6.1.4.1.6296.101.23.5.7.2.2.23 | OCTET STRING | read-write | current |
| sleGponProfileTdmPwNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.7.2.3 | |||
| sleGponProfileTdmSdh OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.7.3 | |||
| sleGponProfileTdmSdhTable OBJECT-TYPE sleGponProfileTdmSdhTable | 1.3.6.1.4.1.6296.101.23.5.7.3.1 | not-accessible | current | |
| sleGponProfileTdmSdhEntry OBJECT-TYPE key: sleGponProfileTdmSdhIndex | 1.3.6.1.4.1.6296.101.23.5.7.3.1.1 | not-accessible | current | |
| sleGponProfileTdmSdhIndex OBJECT-TYPE sleGponProfileTdmSdhIndex (unused) | 1.3.6.1.4.1.6296.101.23.5.7.3.1.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponProfileTdmSdhName OBJECT-TYPE sleGponProfileTdmSdhName (unused) | 1.3.6.1.4.1.6296.101.23.5.7.3.1.1.2 | OCTET STRING | read-only | current |
| sleGponProfileTdmSdhTuType OBJECT-TYPE sleGponProfileTdmSdhTuType (unused) | 1.3.6.1.4.1.6296.101.23.5.7.3.1.1.3 | INTEGER {tu11(0), tu12(1), tu2(2), tu3(3)} | read-only | current |
| sleGponProfileTdmSdhGemLossIntergrationPeriod OBJECT-TYPE sleGponProfileTdmSdhGemLossIntergrationPeriod (unused) | 1.3.6.1.4.1.6296.101.23.5.7.3.1.1.4 | INTEGER (1..65535) | read-only | current |
| sleGponProfileTdmSdhTransmitJ1J2 OBJECT-TYPE sleGponProfileTdmSdhTransmitJ1J2 (unused) | 1.3.6.1.4.1.6296.101.23.5.7.3.1.1.5 | INTEGER (1..65535) | read-only | current |
| sleGponProfileTdmSdhExpectJ1J2 OBJECT-TYPE sleGponProfileTdmSdhExpectJ1J2 (unused) | 1.3.6.1.4.1.6296.101.23.5.7.3.1.1.6 | INTEGER (1..65535) | read-only | current |
| sleGponProfileTdmSdhReceiveJ1J2 OBJECT-TYPE sleGponProfileTdmSdhReceiveJ1J2 (unused) | 1.3.6.1.4.1.6296.101.23.5.7.3.1.1.7 | INTEGER (1..65535) | read-only | current |
| sleGponProfileTdmSdhTimMonitor OBJECT-TYPE sleGponProfileTdmSdhTimMonitor (unused) | 1.3.6.1.4.1.6296.101.23.5.7.3.1.1.8 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponProfileTdmSdhTimAis OBJECT-TYPE sleGponProfileTdmSdhTimAis (unused) | 1.3.6.1.4.1.6296.101.23.5.7.3.1.1.9 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponProfileTdmSdhControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.7.3.2 | |||
| sleGponProfileTdmSdhControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.5.7.3.2.1 | INTEGER {createProfile(1), destroyProfile(2), setTuType(3), setGemLossIntergrationPeriod(4), setTransmitJ1J2(5), setExpectJ1J2(6), setreceiveJ1J2(7), setTimMonitor(8), setTimAis(9)} | read-write | current |
| sleGponProfileTdmSdhControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.5.7.3.2.2 | SleControlStatusType | read-only | current |
| sleGponProfileTdmSdhControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.5.7.3.2.3 | Gauge32 | read-write | current |
| sleGponProfileTdmSdhControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.5.7.3.2.4 | TimeTicks | read-only | current |
| sleGponProfileTdmSdhControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.5.7.3.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfileTdmSdhControlIndex OBJECT-TYPE sleGponProfileTdmSdhControlIndex (unused) | 1.3.6.1.4.1.6296.101.23.5.7.3.2.6 | INTEGER (1..65535) | read-write | current |
| sleGponProfileTdmSdhControlName OBJECT-TYPE sleGponProfileTdmSdhControlName (unused) | 1.3.6.1.4.1.6296.101.23.5.7.3.2.7 | OCTET STRING | read-write | current |
| sleGponProfileTdmSdhControlTuType OBJECT-TYPE sleGponProfileTdmSdhControlTuType (unused) | 1.3.6.1.4.1.6296.101.23.5.7.3.2.8 | INTEGER {tu11(0), tu12(1), tu2(2), tu3(3)} | read-write | current |
| sleGponProfileTdmSdhControlGemLossIntergrationPeriod OBJECT-TYPE sleGponProfileTdmSdhControlGemLossIntergrationPeriod (unused) | 1.3.6.1.4.1.6296.101.23.5.7.3.2.9 | INTEGER (1..65535) | read-write | current |
| sleGponProfileTdmSdhControlTransmitJ1J2 OBJECT-TYPE sleGponProfileTdmSdhControlTransmitJ1J2 (unused) | 1.3.6.1.4.1.6296.101.23.5.7.3.2.10 | INTEGER (1..65535) | read-write | current |
| sleGponProfileTdmSdhControlExpectJ1J2 OBJECT-TYPE sleGponProfileTdmSdhControlExpectJ1J2 (unused) | 1.3.6.1.4.1.6296.101.23.5.7.3.2.11 | INTEGER (1..65535) | read-write | current |
| sleGponProfileTdmSdhControlReceiveJ1J2 OBJECT-TYPE sleGponProfileTdmSdhControlReceiveJ1J2 (unused) | 1.3.6.1.4.1.6296.101.23.5.7.3.2.12 | INTEGER (1..65535) | read-write | current |
| sleGponProfileTdmSdhControlTimMonitor OBJECT-TYPE sleGponProfileTdmSdhControlTimMonitor (unused) | 1.3.6.1.4.1.6296.101.23.5.7.3.2.13 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponProfileTdmSdhControlTimAis OBJECT-TYPE sleGponProfileTdmSdhControlTimAis (unused) | 1.3.6.1.4.1.6296.101.23.5.7.3.2.14 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponProfileTdmSdhNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.7.3.3 | |||
| sleGponOltServiceProfile OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.8 | |||
| sleGponOltServiceProfileTable OBJECT-TYPE sleGponProfileTdmPwMtTable | 1.3.6.1.4.1.6296.101.23.5.8.1 | not-accessible | current | |
| sleGponOltServiceProfileEntry OBJECT-TYPE key: sleGponOltServiceOltIndex, sleGponOltServiceProfileIndex | 1.3.6.1.4.1.6296.101.23.5.8.1.1 | not-accessible | current | |
| sleGponOltServiceOltIndex OBJECT-TYPE The Olt index | 1.3.6.1.4.1.6296.101.23.5.8.1.1.1 | INTEGER (1..2147483647) | read-only | current |
| sleGponOltServiceProfileIndex OBJECT-TYPE The profile index. | 1.3.6.1.4.1.6296.101.23.5.8.1.1.2 | Integer32 (1..65535) | read-only | current |
| sleGponOltServiceProfileModelName OBJECT-TYPE The Service Profile Model name. | 1.3.6.1.4.1.6296.101.23.5.8.1.1.3 | OCTET STRING | read-only | current |
| sleGponOltServiceProfileProfileName OBJECT-TYPE he Service Profile Name. | 1.3.6.1.4.1.6296.101.23.5.8.1.1.4 | OCTET STRING | read-only | current |
| sleGponOltServiceProfileControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.8.2 | |||
| sleGponOltServiceProfileControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.5.8.2.1 | INTEGER {setGponOltServiceProfileModel(1)} | read-write | current |
| sleGponOltServiceProfileControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.5.8.2.2 | SleControlStatusType | read-only | current |
| sleGponOltServiceProfileControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.5.8.2.3 | Gauge32 | read-write | current |
| sleGponOltServiceProfileControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.5.8.2.4 | TimeTicks | read-only | current |
| sleGponOltServiceProfileControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.5.8.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOltServiceProfileControlOltIndex OBJECT-TYPE The Olt index | 1.3.6.1.4.1.6296.101.23.5.8.2.6 | INTEGER (1..2147483647) | read-write | current |
| sleGponOltServiceProfileControlModelName OBJECT-TYPE The Service Profile Model name. | 1.3.6.1.4.1.6296.101.23.5.8.2.7 | OCTET STRING | read-write | current |
| sleGponOltServiceProfileControlProfileName OBJECT-TYPE The Service Profile Name. | 1.3.6.1.4.1.6296.101.23.5.8.2.8 | OCTET STRING | read-write | current |
| sleGponOltServiceProfileNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.5.8.3 | |||
| sleGponBridge OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6 | |||
| sleGponOnuPort OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.1 | |||
| sleGponOnuPortTable OBJECT-TYPE sleGponOnuPortTable | 1.3.6.1.4.1.6296.101.23.6.1.1 | not-accessible | current | |
| sleGponOnuPortEntry OBJECT-TYPE key: sleGponOltId, sleGponOnuId, sleGponOnuPortSlotId, sleGponOnuPortId | 1.3.6.1.4.1.6296.101.23.6.1.1.1 | not-accessible | current | |
| sleGponOnuPortSlotId OBJECT-TYPE Slot Number of ONU Port | 1.3.6.1.4.1.6296.101.23.6.1.1.1.1 | INTEGER {ethernet(1), pots(2), ces(3), video(4), virtualEthernet(5), wifi(6)} | read-only | current |
| sleGponOnuPortId OBJECT-TYPE ONU Port Number | 1.3.6.1.4.1.6296.101.23.6.1.1.1.2 | Integer32 (1..65535) | read-only | current |
| sleGponOnuPortSlotType OBJECT-TYPE Slot type of ONU Port | 1.3.6.1.4.1.6296.101.23.6.1.1.1.3 | INTEGER {unknown(0), speed10M(1), speed100M(2), speed10Mspeed100M(3), speed10Mspeed100Mspeed1000M(4), pots(5), virtualEthernet(6), moca(7), video(8), ieee802dot11(9), ds1(10), e1(11), configurableDs1E1(12)} | read-only | current |
| sleGponOnuPortAdminStatus OBJECT-TYPE State of ONU Port Administratoration | 1.3.6.1.4.1.6296.101.23.6.1.1.1.4 | INTEGER {up(1), down(2)} | read-only | current |
| sleGponOnuPortOperStatus OBJECT-TYPE State of ONU Port Operation | 1.3.6.1.4.1.6296.101.23.6.1.1.1.5 | INTEGER {up(1), down(2)} | read-only | current |
| sleGponOnuPortLinkUptime OBJECT-TYPE The elapsed time after link-up event | 1.3.6.1.4.1.6296.101.23.6.1.1.1.6 | Counter64 | read-only | current |
| sleGponOnuPortAutoNego OBJECT-TYPE The port auto negotiation. (This OID is not available) | 1.3.6.1.4.1.6296.101.23.6.1.1.1.7 | INTEGER {on(1), off(2)} | read-only | current |
| sleGponOnuPortSpeed OBJECT-TYPE The port speed. (This OID is not available) | 1.3.6.1.4.1.6296.101.23.6.1.1.1.8 | INTEGER {speed10(1), speed100(2), speed1000(3), unknown(255)} | read-only | current |
| sleGponOnuPortDuplex OBJECT-TYPE The port duplex. | 1.3.6.1.4.1.6296.101.23.6.1.1.1.9 | INTEGER {full(1), half(2), unknown(255)} | read-only | current |
| sleGponOnuPortGemblockRx OBJECT-TYPE The gemblock port Rx count | 1.3.6.1.4.1.6296.101.23.6.1.1.1.10 | Counter64 | read-only | current |
| sleGponOnuPortGemblockTx OBJECT-TYPE The gemblock port Tx count | 1.3.6.1.4.1.6296.101.23.6.1.1.1.11 | Counter64 | read-only | current |
| sleGponOnuPortDiscardFrames OBJECT-TYPE The discard frames. | 1.3.6.1.4.1.6296.101.23.6.1.1.1.12 | Counter64 | read-only | current |
| sleGponOnuPortElapsedTimeAfterClearStats OBJECT-TYPE The elapsed time after clearing statistics. | 1.3.6.1.4.1.6296.101.23.6.1.1.1.13 | Counter64 | read-only | current |
| sleGponOnuPortHookState OBJECT-TYPE The port hook state | 1.3.6.1.4.1.6296.101.23.6.1.1.1.14 | INTEGER {on(1), off(2), unused(255)} | read-only | current |
| sleGponOnuPortSensedType OBJECT-TYPE The port sensed type | 1.3.6.1.4.1.6296.101.23.6.1.1.1.15 | INTEGER {ds1(10), e1(11), unknown(255)} | read-only | current |
| sleGponOnuPortUniDescription OBJECT-TYPE The port description for UNI of ONT. | 1.3.6.1.4.1.6296.101.23.6.1.1.1.16 | OCTET STRING | read-only | current |
| sleGponOnuPortConfSpeed OBJECT-TYPE The port speed configuration. | 1.3.6.1.4.1.6296.101.23.6.1.1.1.17 | INTEGER {auto(0), speed10(1), speed100(2), speed1000(3)} | read-only | current |
| sleGponOnuPortConfDuplex OBJECT-TYPE The port duplex configuration | 1.3.6.1.4.1.6296.101.23.6.1.1.1.18 | INTEGER {auto(0), full(1), half(2)} | read-only | current |
| sleGponOnuPortMediumMode OBJECT-TYPE The port medium mode. | 1.3.6.1.4.1.6296.101.23.6.1.1.1.19 | INTEGER {mdiX(0), mdi(1), auto(2), unknown(255)} | read-only | current |
| sleGponOnuPortLoopbackStatus OBJECT-TYPE The port loopback Status configuration. | 1.3.6.1.4.1.6296.101.23.6.1.1.1.20 | INTEGER {disable(0), enableType1(1), enableType2(2), enableType3(3), enableType4(4), enableType5(5), unknown(255)} | read-only | current |
| sleGponOnuPortOpticModuleInstall OBJECT-TYPE The module instatll status. | 1.3.6.1.4.1.6296.101.23.6.1.1.1.21 | INTEGER {uninstall(0), install(1)} | read-only | current |
| sleGponOnuPortOpticModuleTransceiverType OBJECT-TYPE The module transceiver type. 1: GBIC 2 :Soldered to motherboard 3: SFP 4 :300 pin XBI 5: XENPAK 6: XFP 7: XFF 8: XFP-E 9 :XPAK 10: X2 255:Unknown | 1.3.6.1.4.1.6296.101.23.6.1.1.1.22 | INTEGER {gbic(1), solderedToMotherboard(2), sfp(3), xbi300Pin(4), xenpak(5), xfp(6), xff(7), xfpE(8), spak(9), x2(10), unknown(255)} | read-only | current |
| sleGponOnuPortOpticModuleTransceiverDetailType OBJECT-TYPE The module tranceiver detail type. 1: 1000Base-SX 2: 1000Base-LX 3: 1000Base-CX 4: 1000Base-T 5: 1000Base-LX/LX10 6: 100Base-FX 7: 1000Base-BX10 8: 1000Base-PX 9: OC-3(155M) Multi Mode Short Reach 10: OC-3(155M) Single Mode Intermediate Reach 11: OC-3(155M) Single Mode Long Reach 255: Unknown | 1.3.6.1.4.1.6296.101.23.6.1.1.1.23 | INTEGER {base1000SX(1), base1000LX(2), base1000CX(3), base1000T(4), base1000LXorLX10(5), base1000FX(6), base1000BX10(7), base1000PX(8), oc3MultiShortReach(9), oc3SingleIntermediateReach(10), oc3SingleLongReach(11), unknown(255)} | read-only | current |
| sleGponOnuPortOpticModuleLengthMode OBJECT-TYPE The module length mode. 1: singleMode 2: multiMode 255 : unknown | 1.3.6.1.4.1.6296.101.23.6.1.1.1.24 | INTEGER {singleMode(1), multiMode(2), unknown(255)} | read-only | current |
| sleGponOnuPortOpticModuleLength OBJECT-TYPE the module length(m). | 1.3.6.1.4.1.6296.101.23.6.1.1.1.25 | INTEGER (1..65535) | read-only | current |
| sleGponOnuPortOpticModuleSpeed OBJECT-TYPE The module speed. 1: 155 Mb/s 2: 200 Mb/s 3: 622 Mb/s 4: 1062.5 Mb/s 5: 1250 Mb/s 6: 2125 Mb/s 7: 4250 Mb/s 8: 2488 Mb/s 255: unknown | 1.3.6.1.4.1.6296.101.23.6.1.1.1.26 | INTEGER {speed155(1), speed200(2), speed622(3), speed1062dot5(4), speed1250(5), speed2125(6), speed4250(7), speed2488(8), unknown(255)} | read-only | current |
| sleGponOnuPortOpticModuleWavelength OBJECT-TYPE The module wavelength 1: 850 nm 2: 1310 nm 3: 1490 nm 4: 1550 nm 255: unknown | 1.3.6.1.4.1.6296.101.23.6.1.1.1.27 | INTEGER {length850(1), length1310(2), length1490(3), length1550(4), unknown(255)} | read-only | current |
| sleGponOnuPortOpticModuleConnecterType OBJECT-TYPE The module connecter type. 1: SC 2: Fiber Channel Style 1 copper connector 3: Fiber Channel Style 2 copper connector 4: BNC/TNC 5: Fiber Channel coaxial headers 6: Fiber Jack 7: LC 8: MT-RJ 9: MU 10: SG 11: Optical Pigtail 12: HSSDC II 13: Copper Pigtail 255: unknown | 1.3.6.1.4.1.6296.101.23.6.1.1.1.28 | INTEGER {sc(1), fiberChannelStyle1(2), fiberChannelStyle2(3), bncTnc(4), fiberChannelCoaxialHeaders(5), fiberJack(6), lc(7), mtRj(8), mu(9), sg(10), opticalPigtail(11), hssdc2(12), copperPigtail(13), unknown(255)} | read-only | current |
| sleGponOnuPortOpticModuleVendorName OBJECT-TYPE The module vendor name. | 1.3.6.1.4.1.6296.101.23.6.1.1.1.29 | OCTET STRING | read-only | current |
| sleGponOnuPortOpticModuleVendorPartName OBJECT-TYPE The module vendor part name. | 1.3.6.1.4.1.6296.101.23.6.1.1.1.30 | OCTET STRING | read-only | current |
| sleGponOnuPortOpticModuleVendorRevision OBJECT-TYPE The module vendor revision. | 1.3.6.1.4.1.6296.101.23.6.1.1.1.31 | OCTET STRING | read-only | current |
| sleGponOnuPortOpticModuleVendorSerialNumber OBJECT-TYPE the moduel vendor serial number. | 1.3.6.1.4.1.6296.101.23.6.1.1.1.32 | OCTET STRING | read-only | current |
| sleGponOnuPortOpticModuleProductDate OBJECT-TYPE The module vendor product date. | 1.3.6.1.4.1.6296.101.23.6.1.1.1.33 | OCTET STRING | read-only | current |
| sleGponOnuPortLinkUpCount OBJECT-TYPE The Link Up Count of ONU Port | 1.3.6.1.4.1.6296.101.23.6.1.1.1.34 | Integer32 (0..65535) | read-only | current |
| sleGponOnuPortLinkDownCount OBJECT-TYPE The Link Down Count of ONU Port | 1.3.6.1.4.1.6296.101.23.6.1.1.1.35 | Integer32 (0..65535) | read-only | current |
| sleGponOnuPortOpticModuleTemper OBJECT-TYPE Internally measured module temperature.(C) | 1.3.6.1.4.1.6296.101.23.6.1.1.1.36 | OCTET STRING | read-only | current |
| sleGponOnuPortOpticModuleVoltage OBJECT-TYPE Internally measured supply voltage in transceiver.(V) | 1.3.6.1.4.1.6296.101.23.6.1.1.1.37 | OCTET STRING | read-only | current |
| sleGponOnuPortOpticModuleTxbias OBJECT-TYPE Internally measured TX Bias Current.(mA) | 1.3.6.1.4.1.6296.101.23.6.1.1.1.38 | OCTET STRING | read-only | current |
| sleGponOnuPortOpticModuleTxPower OBJECT-TYPE Measured TX output power.(dBm) | 1.3.6.1.4.1.6296.101.23.6.1.1.1.39 | OCTET STRING | read-only | current |
| sleGponOnuPortOpticModuleRxPower OBJECT-TYPE Measured RX input power.(dBm) | 1.3.6.1.4.1.6296.101.23.6.1.1.1.40 | OCTET STRING | read-only | current |
| sleGponOnuPortMgmtAdminStatus OBJECT-TYPE State of ONU Port Administratoration | 1.3.6.1.4.1.6296.101.23.6.1.1.1.41 | INTEGER {up(0), down(1), unknown(255)} | read-only | current |
| sleGponOnuPortMgmtCapability OBJECT-TYPE The port management capability | 1.3.6.1.4.1.6296.101.23.6.1.1.1.42 | INTEGER {omci(0), nonOmci(1), both(2), unknown(255)} | read-only | current |
| sleGponOnuPortMgmtMethod OBJECT-TYPE The port management method | 1.3.6.1.4.1.6296.101.23.6.1.1.1.43 | INTEGER {omci(0), nonOmci(1), unknown(255)} | read-only | current |
| sleGponOnuPortPowerControl OBJECT-TYPE The port power control | 1.3.6.1.4.1.6296.101.23.6.1.1.1.44 | INTEGER {enable(1), disable(2), unknown(255)} | read-only | current |
| sleGponOnuPortControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.1.2 | |||
| sleGponOnuPortControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.6.1.2.1 | INTEGER {setOnuPortAdmin(1), setOnuPortAutoNego(2), setOnuPortSpeed(3), clearOnuPortStats(4), setUniDescription(5), setAutoDetection(6), setOnuPortMediumMode(7), setOnuPortLoopbackStatus(8), updateOnuPortOpticModuleInfo(9), updateOnuPortLinkStatisticsInfo(10), updateOnuPortMgmtData(11), setOnuPortPowerControl(12)} | read-write | current |
| sleGponOnuPortControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.6.1.2.2 | SleControlStatusType | read-only | current |
| sleGponOnuPortControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.6.1.2.3 | Gauge32 | read-write | current |
| sleGponOnuPortControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.6.1.2.4 | TimeTicks | read-only | current |
| sleGponOnuPortControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.6.1.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOnuPortControlOltId OBJECT-TYPE Gpon Olt Index | 1.3.6.1.4.1.6296.101.23.6.1.2.6 | INTEGER (1..2147483647) | read-write | current |
| sleGponOnuPortControlOnuId OBJECT-TYPE Gpon Onu Index | 1.3.6.1.4.1.6296.101.23.6.1.2.7 | INTEGER (1..65535) | read-write | current |
| sleGponOnuPortControlSlotId OBJECT-TYPE OSlot Number of ONU Port | 1.3.6.1.4.1.6296.101.23.6.1.2.8 | INTEGER {ethernet(1), pots(2), ces(3), video(4), virtualEthernet(5), wifi(6)} | read-write | current |
| sleGponOnuPortControlPortId OBJECT-TYPE ONU Port Number | 1.3.6.1.4.1.6296.101.23.6.1.2.9 | INTEGER (1..65535) | read-write | current |
| sleGponOnuPortControlAdminStatus OBJECT-TYPE State of ONU Port Administratoration | 1.3.6.1.4.1.6296.101.23.6.1.2.10 | INTEGER {up(1), down(2)} | read-write | current |
| sleGponOnuPortControlOnuSerial OBJECT-TYPE ONU Serial Number (This OID is not available.) | 1.3.6.1.4.1.6296.101.23.6.1.2.11 | OCTET STRING | read-write | current |
| sleGponOnuPortControlAutoNego OBJECT-TYPE The port auto negotiation. (This OID is not available.) | 1.3.6.1.4.1.6296.101.23.6.1.2.12 | INTEGER {on(1), off(2)} | read-write | current |
| sleGponOnuPortControlSpeed OBJECT-TYPE The port speed configuration. (This OID is not available.) | 1.3.6.1.4.1.6296.101.23.6.1.2.13 | INTEGER {auto(0), speed10(1), speed100(2), speed1000(3)} | read-write | current |
| sleGponOnuPortControlUniDescription OBJECT-TYPE The port description for UNI of ONT. | 1.3.6.1.4.1.6296.101.23.6.1.2.14 | OCTET STRING | read-write | current |
| sleGponOnuPortControlDuplex OBJECT-TYPE The port duplex configuration | 1.3.6.1.4.1.6296.101.23.6.1.2.15 | INTEGER {auto(0), full(1), half(2)} | read-write | current |
| sleGponOnuPortControlMediumMode OBJECT-TYPE The port medium mode. | 1.3.6.1.4.1.6296.101.23.6.1.2.16 | INTEGER {mdiX(0), mdi(1), auto(2), unknown(255)} | read-write | current |
| sleGponOnuPortControlLoopbackStatus OBJECT-TYPE The port loopback Status configuration. | 1.3.6.1.4.1.6296.101.23.6.1.2.17 | INTEGER {disable(0), enableType1(1), enableType2(2), enableType3(3), enableType4(4), enableType5(5), unknown(255)} | read-write | current |
| sleGponOnuPortControlPowerControl OBJECT-TYPE The port power control | 1.3.6.1.4.1.6296.101.23.6.1.2.18 | INTEGER {enable(1), disable(2)} | read-write | current |
| sleGponOnuPortNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.1.3 | |||
| sleGponOnuUserMac OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.2 | |||
| sleGponOnuUserMacTable OBJECT-TYPE sleGponOnuUserMacTable | 1.3.6.1.4.1.6296.101.23.6.2.1 | not-accessible | current | |
| sleGponOnuUserMacEntry OBJECT-TYPE key: sleGponOltId, sleGponOnuId, sleGponOnuUserMacVlanId, sleGponOnuUserMacAddress | 1.3.6.1.4.1.6296.101.23.6.2.1.1 | not-accessible | current | |
| sleGponOnuUserMacAddress OBJECT-TYPE The user MAC addresses that are leant at the running ONU. | 1.3.6.1.4.1.6296.101.23.6.2.1.1.1 | OCTET STRING (SIZE(0..6)) | read-only | current |
| sleGponOnuUserMacVlanId OBJECT-TYPE The user VLAN-ID that are leant at the running ONU. | 1.3.6.1.4.1.6296.101.23.6.2.1.1.2 | INTEGER (1..4094) | read-only | current |
| sleGponOnuUserMacPortId OBJECT-TYPE The user GEM PORT-ID that are leant at the running ONU. | 1.3.6.1.4.1.6296.101.23.6.2.1.1.3 | INTEGER (0..4096) | read-only | current |
| sleGponOnuUserMacOltId OBJECT-TYPE Gpon Olt Index. | 1.3.6.1.4.1.6296.101.23.6.2.1.1.4 | INTEGER (1..2147483647) | read-only | current |
| sleGponOnuUserMacOnuId OBJECT-TYPE Gpon Onu Index. | 1.3.6.1.4.1.6296.101.23.6.2.1.1.5 | INTEGER (1..65535) | read-only | current |
| sleGponOnuUserMacStatus OBJECT-TYPE The mac learning status. | 1.3.6.1.4.1.6296.101.23.6.2.1.1.6 | INTEGER {dynamic(0), snoop(1), static(2), unknown(3)} | read-only | current |
| sleGponOnuUserMacControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.2.2 | |||
| sleGponOnuUserMacControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.6.2.2.1 | INTEGER {clearOltMacOne(1), clearOltMacOnu(2), clearOltMacAll(3), updateOltMac(4)} | read-write | current |
| sleGponOnuUserMacControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.6.2.2.2 | SleControlStatusType | read-write | current |
| sleGponOnuUserMacControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.6.2.2.3 | Gauge32 | read-write | current |
| sleGponOnuUserMacControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.6.2.2.4 | Integer32 | read-write | current |
| sleGponOnuUserMacControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.6.2.2.5 | SleControlRequestResultType | read-write | current |
| sleGponOnuUserMacControlOltId OBJECT-TYPE Gpon Olt Index | 1.3.6.1.4.1.6296.101.23.6.2.2.6 | INTEGER (1..2147483647) | read-write | current |
| sleGponOnuUserMacControlOnuId OBJECT-TYPE Gpon Onu Index | 1.3.6.1.4.1.6296.101.23.6.2.2.7 | INTEGER (1..65535) | read-write | current |
| sleGponOnuUserMacControlAddress OBJECT-TYPE The user MAC addresses that are leant at the running ONU. | 1.3.6.1.4.1.6296.101.23.6.2.2.8 | OCTET STRING | read-write | current |
| sleGponOnuUserMacControlVlanId OBJECT-TYPE GPON ONU Vlan Index | 1.3.6.1.4.1.6296.101.23.6.2.2.9 | INTEGER (1..65535) | read-write | current |
| sleGponOnuUserMacNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.2.3 | |||
| sleGponBridgeVoIP OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.3 | |||
| sleGponBridgeVoIPInfoTable OBJECT-TYPE sleGponBridgeVoIPInfoTable | 1.3.6.1.4.1.6296.101.23.6.3.1 | not-accessible | current | |
| sleGponBridgeVoIPInfoEntry OBJECT-TYPE key: sleGponBridgeVoIPInfoOltId, sleGponBridgeVoIPInfoOnuId | 1.3.6.1.4.1.6296.101.23.6.3.1.1 | not-accessible | current | |
| sleGponBridgeVoIPInfoOltId OBJECT-TYPE Olt Index. | 1.3.6.1.4.1.6296.101.23.6.3.1.1.1 | Integer32 (1..2147483647) | read-only | current |
| sleGponBridgeVoIPInfoOnuId OBJECT-TYPE Onu Index. | 1.3.6.1.4.1.6296.101.23.6.3.1.1.2 | Integer32 (1..65535) | read-only | current |
| sleGponBridgeVoIPInfoDHCP OBJECT-TYPE Indicate whether using DHCP or not. | 1.3.6.1.4.1.6296.101.23.6.3.1.1.3 | INTEGER {auto(1), manual(2)} | read-only | current |
| sleGponBridgeVoIPInfoIpAddress OBJECT-TYPE IP Address. | 1.3.6.1.4.1.6296.101.23.6.3.1.1.4 | IpAddress | read-only | current |
| sleGponBridgeVoIPInfoMethods OBJECT-TYPE Supporting Methods. | 1.3.6.1.4.1.6296.101.23.6.3.1.1.5 | Bits {omci(0), file(1), tr69(2), ietf(3)} | read-only | current |
| sleGponBridgeVoIPInfoCurrMethods OBJECT-TYPE Current using method. | 1.3.6.1.4.1.6296.101.23.6.3.1.1.6 | INTEGER {omci(1), file(2), tr69(3), ietf(4), unknown(255)} | read-only | current |
| sleGponBridgeVoIPInfoProtocols OBJECT-TYPE Supporting Protocols. | 1.3.6.1.4.1.6296.101.23.6.3.1.1.7 | Bits {sip(0), h248(1), mgcp(2)} | read-only | current |
| sleGponBridgeVoIPInfoCurrProtocols OBJECT-TYPE Current using protocol. | 1.3.6.1.4.1.6296.101.23.6.3.1.1.8 | INTEGER {sip(1), h248(2), mgcp(3), unknown(255)} | read-only | current |
| sleGponBridgeVoIPLineTable OBJECT-TYPE sleGponBridgeVoIPLineTable | 1.3.6.1.4.1.6296.101.23.6.3.2 | not-accessible | current | |
| sleGponBridgeVoIPLineEntry OBJECT-TYPE sleGponBridgeVoIPLineOltId, sleGponBridgeVoIPLineOnuId, sleGponBridgeVoIPLinePots | 1.3.6.1.4.1.6296.101.23.6.3.2.1 | not-accessible | current | |
| sleGponBridgeVoIPLineOltId OBJECT-TYPE Olt Index. | 1.3.6.1.4.1.6296.101.23.6.3.2.1.1 | Integer32 (1..2147483647) | read-only | current |
| sleGponBridgeVoIPLineOnuId OBJECT-TYPE Onu Index. | 1.3.6.1.4.1.6296.101.23.6.3.2.1.2 | Integer32 (1..65535) | read-only | current |
| sleGponBridgeVoIPLinePots OBJECT-TYPE The Outer Vlan-ID to tag for incoming packet with vlan index. | 1.3.6.1.4.1.6296.101.23.6.3.2.1.3 | Integer32 (1..65535) | read-only | current |
| sleGponBridgeVoIPLineAdminStatus OBJECT-TYPE Admin status. | 1.3.6.1.4.1.6296.101.23.6.3.2.1.4 | INTEGER {up(1), down(2)} | read-only | current |
| sleGponBridgeVoIPLineOperStatus OBJECT-TYPE Oper status. | 1.3.6.1.4.1.6296.101.23.6.3.2.1.5 | INTEGER {up(1), down(2)} | read-only | current |
| sleGponBridgeVoIPLineStatus OBJECT-TYPE Line Status | 1.3.6.1.4.1.6296.101.23.6.3.2.1.6 | INTEGER {noneInitial(1), registered(2), inSession(3), failedRegistrationIcmpError(4), failedRegistrationFailedTcp(5), failedRegistrationFailedAuthentication(6), failedRegistrationTimeout(7), failedRegistrationServerFailCode(8), failedInviteIcmpError(9), failedInviteFailedTcp(10), failedInviteFailedAuthentication(11), failedInviteTimeout(12), failedInviteServerFailCode(13), portNotConfigured(14), configDone(15)} | read-only | current |
| sleGponBridgeSlot OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.4 | |||
| sleGponBridgeSlotStatusTable OBJECT-TYPE sleGponBridgeSlotStatusTable | 1.3.6.1.4.1.6296.101.23.6.4.1 | not-accessible | current | |
| sleGponBridgeSlotStatusEntry OBJECT-TYPE key: sleGponBridgeSlotIndex | 1.3.6.1.4.1.6296.101.23.6.4.1.1 | not-accessible | current | |
| sleGponBridgeSlotIndex OBJECT-TYPE Gpon slot index. | 1.3.6.1.4.1.6296.101.23.6.4.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponBridgeSlotConnectionStatus OBJECT-TYPE Gpon slot connection status. | 1.3.6.1.4.1.6296.101.23.6.4.1.1.2 | INTEGER {nonCreate(1), disconnect(2), waiting(3), connect(4), monitoring(5), unknown(255)} | read-only | current |
| sleGponBridgeSlotFlags OBJECT-TYPE Flags. | 1.3.6.1.4.1.6296.101.23.6.4.1.1.3 | INTEGER {true(1), false(2)} | read-only | current |
| sleGponOnuVoipLine OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.5 | |||
| sleGponOnuVoipLineTable OBJECT-TYPE sleGponOnuVoipLineTable | 1.3.6.1.4.1.6296.101.23.6.5.1 | not-accessible | current | |
| sleGponOnuVoipLineEntry OBJECT-TYPE key: sleGponOnuVoipLineOltId, sleGponOnuVoipLineOnuId, sleGponOnuVoipLineId | 1.3.6.1.4.1.6296.101.23.6.5.1.1 | not-accessible | current | |
| sleGponOnuVoipLineOltId OBJECT-TYPE Olt Index. | 1.3.6.1.4.1.6296.101.23.6.5.1.1.1 | Integer32 (1..2147483647) | read-only | current |
| sleGponOnuVoipLineOnuId OBJECT-TYPE Onu Index. | 1.3.6.1.4.1.6296.101.23.6.5.1.1.2 | Integer32 (1..65535) | read-only | current |
| sleGponOnuVoipLineId OBJECT-TYPE The Outer Vlan-ID to tag for incoming packet with vlan index. | 1.3.6.1.4.1.6296.101.23.6.5.1.1.3 | Integer32 (1..65535) | read-only | current |
| sleGponOnuVoipLineStatus OBJECT-TYPE The line status | 1.3.6.1.4.1.6296.101.23.6.5.1.1.4 | INTEGER {noneInitial(1), registered(2), inSession(3), failedRegistrationIcmpError(4), failedRegistrationFailedTcp(5), failedRegistrationFailedAuthentication(6), failedRegistrationTimeout(7), failedRegistrationServerFailCode(8), failedInviteIcmpError(9), failedInviteFailedTcp(10), failedInviteFailedAuthentication(11), failedInviteTimeout(12), failedInviteServerFailCode(13), portNotConfigured(14), configDone(15)} | read-only | current |
| sleGponOnuVoipLineUsedCodec OBJECT-TYPE The used codec configuration | 1.3.6.1.4.1.6296.101.23.6.5.1.1.5 | INTEGER {autoSelect(0), gDot711ALaw(1), gDot711MuLaw(2), gDot723(3), gDot722Dot1(4), gDot722Dot2(5), gDot723Dot1(6), gDot726(7), gDot728(8), gDot729A(9), gDot729B(10), gDot729D(11), gDot729E(12), melp(13), unknown(255)} | read-only | current |
| sleGponOnuVoipLineSessionType OBJECT-TYPE The session type | 1.3.6.1.4.1.6296.101.23.6.5.1.1.6 | INTEGER {idle(0), twoWay(1), threeWay(2), fax(3), telem(4), conference(5), unknown(255)} | read-only | current |
| sleGponOnuVoipLine1stProtocolPeriod OBJECT-TYPE 1st protocol period | 1.3.6.1.4.1.6296.101.23.6.5.1.1.7 | INTEGER (1..65535) | read-only | current |
| sleGponOnuVoipLine1stDestAddr OBJECT-TYPE 1st destination address | 1.3.6.1.4.1.6296.101.23.6.5.1.1.8 | OCTET STRING | read-only | current |
| sleGponOnuVoipLine2ndProtocolPeriod OBJECT-TYPE 2nd protocol period | 1.3.6.1.4.1.6296.101.23.6.5.1.1.9 | INTEGER (1..65535) | read-only | current |
| sleGponOnuVoipLine2ndDestAddr OBJECT-TYPE 2nd destination address | 1.3.6.1.4.1.6296.101.23.6.5.1.1.10 | OCTET STRING | read-only | current |
| sleGponOnuVoipLineControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.5.2 | |||
| sleGponOnuVoipLineControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.6.5.2.1 | INTEGER {updateVoipInfo(1)} | read-write | current |
| sleGponOnuVoipLineControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.6.5.2.2 | SleControlStatusType | read-write | current |
| sleGponOnuVoipLineControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.6.5.2.3 | Gauge32 | read-write | current |
| sleGponOnuVoipLineControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.6.5.2.4 | TimeTicks | read-write | current |
| sleGponOnuVoipLineControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.6.5.2.5 | SleControlRequestResultType | read-write | current |
| sleGponOnuVoipLineControlOltId OBJECT-TYPE Olt Index. | 1.3.6.1.4.1.6296.101.23.6.5.2.6 | Integer32 (1..2147483647) | read-write | current |
| sleGponOnuVoipLineControlOnuId OBJECT-TYPE Onu Index. | 1.3.6.1.4.1.6296.101.23.6.5.2.7 | Integer32 (1..65535) | read-write | current |
| sleGponOnuVoipLineNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.5.3 | |||
| sleGponOnuAni OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.6 | |||
| sleGponOnuAniTable OBJECT-TYPE sleGponOnuPortTable | 1.3.6.1.4.1.6296.101.23.6.6.1 | not-accessible | current | |
| sleGponOnuAniEntry OBJECT-TYPE key: sleGponOltId, sleGponOnuId, sleGponOnuPortSlotId, sleGponOnuPortId | 1.3.6.1.4.1.6296.101.23.6.6.1.1 | not-accessible | current | |
| sleGponOnuAniId OBJECT-TYPE The ani index. | 1.3.6.1.4.1.6296.101.23.6.6.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponOnuAniType OBJECT-TYPE The ONU ANI type. | 1.3.6.1.4.1.6296.101.23.6.6.1.1.2 | INTEGER {gpon(1), video(2)} | read-only | current |
| sleGponOnuAniOpticModuleInstall OBJECT-TYPE The module instatll status. | 1.3.6.1.4.1.6296.101.23.6.6.1.1.3 | INTEGER {uninstall(0), install(1)} | read-only | current |
| sleGponOnuAniOpticModuleTransceiverType OBJECT-TYPE The module transceiver type. 1: GBIC 2 :Soldered to motherboard 3: SFP 4 :300 pin XBI 5: XENPAK 6: XFP 7: XFF 8: XFP-E 9 :XPAK 10: X2 255:Unknown | 1.3.6.1.4.1.6296.101.23.6.6.1.1.4 | INTEGER {gbic(1), solderedToMotherboard(2), sfp(3), xbi300Pin(4), xenpak(5), xfp(6), xff(7), xfpE(8), spak(9), x2(10), unknown(255)} | read-only | current |
| sleGponOnuAniOpticModuleTransceiverDetailType OBJECT-TYPE The module tranceiver detail type. 1: 1000Base-SX 2: 1000Base-LX 3: 1000Base-CX 4: 1000Base-T 5: 1000Base-LX/LX10 6: 100Base-FX 7: 1000Base-BX10 8: 1000Base-PX 9: OC-3(155M) Multi Mode Short Reach 10: OC-3(155M) Single Mode Intermediate Reach 11: OC-3(155M) Single Mode Long Reach 255: Unknown | 1.3.6.1.4.1.6296.101.23.6.6.1.1.5 | INTEGER {base1000SX(1), base1000LX(2), base1000CX(3), base1000T(4), base1000LXorLX10(5), base1000FX(6), base1000BX10(7), base1000PX(8), oc3MultiShortReach(9), oc3SingleIntermediateReach(10), oc3SingleLongReach(11), unknown(255)} | read-only | current |
| sleGponOnuAniOpticModuleLengthMode OBJECT-TYPE The module length mode. 1: singleMode 2: multiMode 255 : unknown | 1.3.6.1.4.1.6296.101.23.6.6.1.1.6 | INTEGER {singleMode(1), multiMode(2), unknown(255)} | read-only | current |
| sleGponOnuAniOpticModuleLength OBJECT-TYPE the module length(m). | 1.3.6.1.4.1.6296.101.23.6.6.1.1.7 | INTEGER (1..65535) | read-only | current |
| sleGponOnuAniOpticModuleSpeed OBJECT-TYPE The module speed. 1: 155 Mb/s 2: 200 Mb/s 3: 622 Mb/s 4: 1062.5 Mb/s 5: 1250 Mb/s 6: 2125 Mb/s 7: 4250 Mb/s 8: 2488 Mb/s 255: unknown | 1.3.6.1.4.1.6296.101.23.6.6.1.1.8 | INTEGER {speed155(1), speed200(2), speed622(3), speed1062dot5(4), speed1250(5), speed2125(6), speed4250(7), speed2488(8), unknown(255)} | read-only | current |
| sleGponOnuAniOpticModuleWavelength OBJECT-TYPE The module wavelength 1: 850 nm 2: 1310 nm 3: 1490 nm 4: 1550 nm 255: unknown | 1.3.6.1.4.1.6296.101.23.6.6.1.1.9 | INTEGER {length850(1), length1310(2), length1490(3), length1550(4), unknown(255)} | read-only | current |
| sleGponOnuAniOpticModuleConnecterType OBJECT-TYPE The module connecter type. 1: SC 2: Fiber Channel Style 1 copper connector 3: Fiber Channel Style 2 copper connector 4: BNC/TNC 5: Fiber Channel coaxial headers 6: Fiber Jack 7: LC 8: MT-RJ 9: MU 10: SG 11: Optical Pigtail 12: HSSDC II 13: Copper Pigtail 255: unknown | 1.3.6.1.4.1.6296.101.23.6.6.1.1.10 | INTEGER {sc(1), fiberChannelStyle1(2), fiberChannelStyle2(3), bncTnc(4), fiberChannelCoaxialHeaders(5), fiberJack(6), lc(7), mtRj(8), mu(9), sg(10), opticalPigtail(11), hssdc2(12), copperPigtail(13), unknown(255)} | read-only | current |
| sleGponOnuAniOpticModuleVendorName OBJECT-TYPE The module vendor name. | 1.3.6.1.4.1.6296.101.23.6.6.1.1.11 | OCTET STRING | read-only | current |
| sleGponOnuAniOpticModuleVendorPartName OBJECT-TYPE The module vendor part name. | 1.3.6.1.4.1.6296.101.23.6.6.1.1.12 | OCTET STRING | read-only | current |
| sleGponOnuAniOpticModuleVendorRevision OBJECT-TYPE The module vendor revision. | 1.3.6.1.4.1.6296.101.23.6.6.1.1.13 | OCTET STRING | read-only | current |
| sleGponOnuAniOpticModuleVendorSerialNumber OBJECT-TYPE the moduel vendor serial number. | 1.3.6.1.4.1.6296.101.23.6.6.1.1.14 | OCTET STRING | read-only | current |
| sleGponOnuAniOpticModuleProductDate OBJECT-TYPE The module vendor product date. | 1.3.6.1.4.1.6296.101.23.6.6.1.1.15 | OCTET STRING | read-only | current |
| sleGponOnuAniOpticModuleTemper OBJECT-TYPE Internally measured module temperature.(C) | 1.3.6.1.4.1.6296.101.23.6.6.1.1.16 | OCTET STRING | read-only | current |
| sleGponOnuAniOpticModuleVoltage OBJECT-TYPE Internally measured supply voltage in transceiver.(V) | 1.3.6.1.4.1.6296.101.23.6.6.1.1.17 | OCTET STRING | read-only | current |
| sleGponOnuAniOpticModuleTxbias OBJECT-TYPE Internally measured TX Bias Current.(mA) | 1.3.6.1.4.1.6296.101.23.6.6.1.1.18 | OCTET STRING | read-only | current |
| sleGponOnuAniOpticModuleTxPower OBJECT-TYPE Measured TX output power.(dBm) | 1.3.6.1.4.1.6296.101.23.6.6.1.1.19 | OCTET STRING | read-only | current |
| sleGponOnuAniOpticModuleRxPower OBJECT-TYPE Measured RX input power.(dBm) | 1.3.6.1.4.1.6296.101.23.6.6.1.1.20 | OCTET STRING | read-only | current |
| sleGponOnuAniOpticModuleTemperHighThr OBJECT-TYPE The temperature high threshold | 1.3.6.1.4.1.6296.101.23.6.6.1.1.21 | Integer32 | read-only | current |
| sleGponOnuAniOpticModuleTemperLowThr OBJECT-TYPE The temperature low threshold | 1.3.6.1.4.1.6296.101.23.6.6.1.1.22 | Integer32 | read-only | current |
| sleGponOnuAniOpticModuleVoltageHighThr OBJECT-TYPE The voltage high threshold (0.1 V) | 1.3.6.1.4.1.6296.101.23.6.6.1.1.23 | Integer32 | read-only | current |
| sleGponOnuAniOpticModuleVoltageLowThr OBJECT-TYPE The voltage low threshold (0.1 V) | 1.3.6.1.4.1.6296.101.23.6.6.1.1.24 | Integer32 | read-only | current |
| sleGponOnuAniOpticModuleTxbiasHighThr OBJECT-TYPE The TX bias high threshold | 1.3.6.1.4.1.6296.101.23.6.6.1.1.25 | Integer32 | read-only | current |
| sleGponOnuAniOpticModuleTxbiasLowThr OBJECT-TYPE The TX bias low threshold | 1.3.6.1.4.1.6296.101.23.6.6.1.1.26 | Integer32 | read-only | current |
| sleGponOnuAniOpticModuleTxPowerHighThr OBJECT-TYPE The TX power high threshold (0.1 dBm) | 1.3.6.1.4.1.6296.101.23.6.6.1.1.27 | Integer32 | read-only | current |
| sleGponOnuAniOpticModuleTxPowerLowThr OBJECT-TYPE The TX power low threshold (0.1 dBm) | 1.3.6.1.4.1.6296.101.23.6.6.1.1.28 | Integer32 | read-only | current |
| sleGponOnuAniOpticModuleRxPowerHighThr OBJECT-TYPE The RX power high threshold | 1.3.6.1.4.1.6296.101.23.6.6.1.1.29 | Integer32 | read-only | current |
| sleGponOnuAniOpticModuleRxPowerLowThr OBJECT-TYPE The RX power low threshold | 1.3.6.1.4.1.6296.101.23.6.6.1.1.30 | Integer32 | read-only | current |
| sleGponOnuAniControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.6.2 | |||
| sleGponOnuAniControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.6.6.2.1 | INTEGER {updateOnuAniOpticModuleInfo(1), updateOnuAniOpticModuleInfoTestAction(2)} | read-write | current |
| sleGponOnuAniControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.6.6.2.2 | SleControlStatusType | read-only | current |
| sleGponOnuAniControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.6.6.2.3 | Gauge32 | read-write | current |
| sleGponOnuAniControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.6.6.2.4 | TimeTicks | read-only | current |
| sleGponOnuAniControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.6.6.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOnuAniControlOltId OBJECT-TYPE Gpon Olt Index | 1.3.6.1.4.1.6296.101.23.6.6.2.6 | INTEGER (1..2147483647) | read-write | current |
| sleGponOnuAniControlOnuId OBJECT-TYPE Gpon Onu Index | 1.3.6.1.4.1.6296.101.23.6.6.2.7 | INTEGER (1..65535) | read-write | current |
| sleGponOnuAniControlAniId OBJECT-TYPE The ANI index. | 1.3.6.1.4.1.6296.101.23.6.6.2.8 | Integer32 | read-write | current |
| sleGponOnuAniNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.6.3 | |||
| sleGponStaticMac OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.7 | |||
| sleGponStaticMacTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.6.7.1 | not-accessible | current | |
| sleGponStaticMacEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.6.7.1.1 | not-accessible | current | |
| sleGponStaticMacListId OBJECT-TYPE Gpon List Index. (only use for showing GET) | 1.3.6.1.4.1.6296.101.23.6.7.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponStaticMacStartAddr OBJECT-TYPE The start static MAC address used by range of a multicast or broadcast stream. | 1.3.6.1.4.1.6296.101.23.6.7.1.1.2 | OCTET STRING | read-only | current |
| sleGponStaticMacEndAddr OBJECT-TYPE The end static MAC address used by range of multicast or broadcast stream | 1.3.6.1.4.1.6296.101.23.6.7.1.1.3 | Integer32 | read-only | current |
| sleGponStaticMacTrafficId OBJECT-TYPE Traffic ID information 1 Multicast 2 Broadcast | 1.3.6.1.4.1.6296.101.23.6.7.1.1.4 | INTEGER {multicast(1), broadcast(2)} | read-only | current |
| sleGponStaticMacVlanId OBJECT-TYPE VLAN ID information | 1.3.6.1.4.1.6296.101.23.6.7.1.1.5 | Integer32 (1..4094) | read-only | current |
| sleGponStaticMacPortId OBJECT-TYPE GEM Port ID information | 1.3.6.1.4.1.6296.101.23.6.7.1.1.6 | Integer32 (1..4095) | read-only | current |
| sleGponStaticMacCount OBJECT-TYPE The total range of static MAC address | 1.3.6.1.4.1.6296.101.23.6.7.1.1.7 | Integer32 (0..4096) | read-only | current |
| sleGponStaticMacControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.7.2 | |||
| sleGponStaticMacControlReqest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.6.7.2.1 | INTEGER {setGponStaticMac(1), deleteGponStaticMac(2)} | read-write | current |
| sleGponStaticMacControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.6.7.2.2 | SleControlStatusType | read-only | current |
| sleGponStaticMacControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.6.7.2.3 | Gauge32 | read-write | current |
| sleGponStaticMacControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.6.7.2.4 | TimeTicks | read-only | current |
| sleGponStaticMacControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.6.7.2.5 | SleControlRequestResultType | read-only | current |
| sleGponStaticMacControlOltId OBJECT-TYPE OLT index. | 1.3.6.1.4.1.6296.101.23.6.7.2.6 | Integer32 (1..2147483647) | read-write | current |
| sleGponStaticMacControlStartAddr OBJECT-TYPE The start static MAC address used by range of a multicast or broadcast stream. | 1.3.6.1.4.1.6296.101.23.6.7.2.7 | OCTET STRING | read-write | current |
| sleGponStaticMacControlEndAddr OBJECT-TYPE The end static MAC address used by range of multicast or broadcast stream | 1.3.6.1.4.1.6296.101.23.6.7.2.8 | OCTET STRING | read-write | current |
| sleGponStaticMacControlTrafficId OBJECT-TYPE The traffic type method about the Static MAC address | 1.3.6.1.4.1.6296.101.23.6.7.2.9 | INTEGER {multicast(1), broadcast(2)} | read-write | current |
| sleGponStaticMacControlVlanId OBJECT-TYPE VLAN ID method | 1.3.6.1.4.1.6296.101.23.6.7.2.10 | Integer32 (0..4094) | read-write | current |
| sleGponStaticMacNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.7.3 | |||
| sleGponOnuVideoAni OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.8 | |||
| sleGponOnuVideoAniTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.6.8.1 | not-accessible | current | |
| sleGponOnuVideoAniEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.6.8.1.1 | not-accessible | current | |
| sleGponOnuVideoAniIndex OBJECT-TYPE The ANI index. | 1.3.6.1.4.1.6296.101.23.6.8.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponOnuVideoAniAdminState OBJECT-TYPE This attribute up (1) and down (2) the functions performed by this managed entity. When the administrative state is set to lock, all user functions of this managed entity are blocked, and alarms, TCAs and AVCs for this managed entity and all dependent managed entities are no longer generated. Selection of a default value for this attribute is outside the scope of this Recommendation. | 1.3.6.1.4.1.6296.101.23.6.8.1.1.2 | INTEGER {up(1), down(2)} | read-only | current |
| sleGponOnuVideoAniOperState OBJECT-TYPE This attribute indicates whether or not the managed entity is capable of performing its function. Valid values are up (1) and down (2). | 1.3.6.1.4.1.6296.101.23.6.8.1.1.3 | INTEGER {up(1), down(2)} | read-only | current |
| sleGponOnuVideoAniArc OBJECT-TYPE This attribute allows the activation of alarm reporting control (ARC) for this PPTP. The attribute works in concert with the ARC_interval attribute | 1.3.6.1.4.1.6296.101.23.6.8.1.1.4 | Integer32 (1..255) | read-only | current |
| sleGponOnuVideoAniArcInterval OBJECT-TYPE This attribute defines the interval to be used with the ARC function for this PPTP. The values 0 through 254 give the duration in minutes for the NALM-QI timer. The special value 255 means that the timer never expires. The default value is zero. Note that ARC suppresses the reporting of the alarms, and not the alarm conditions themselves. Therefore, if an alarm condition develops during an ARC interval, then the ONT should maintain the internal indication of the alarm, and if the OLT gets all the alarms, it should be reported. | 1.3.6.1.4.1.6296.101.23.6.8.1.1.5 | Integer32 (1..255) | read-only | current |
| sleGponOnuVideoAniFreqRangeLow OBJECT-TYPE This attribute indicates the lower of the two possible frequency ranges supported. Different frequency ranges are indicated by code points: 0 No low band. 1 50..550 MHz. 2 50..750 MHz. 3 50..870 MHz. | 1.3.6.1.4.1.6296.101.23.6.8.1.1.6 | INTEGER {noLowBand(0), band50To550Mhz(1), band50To750Mhz(2), band50To870Mhz(3)} | read-only | current |
| sleGponOnuVideoAniFreqRangeHigh OBJECT-TYPE This attribute indicates the higher of the two frequency ranges supported. Different frequency ranges are indicated by code points: 0 No high band. 1 550..750 MHz. 2 550..870 MHz. 3 950..2050 MHz. 4 2150..3250 MHz. 5 950..3250 MHz. | 1.3.6.1.4.1.6296.101.23.6.8.1.1.7 | INTEGER {noHighBand(0), band550To750(1), band550To870(2), band950To2050(3), band2150To3250(4), band950To3250(5)} | read-only | current |
| sleGponOnuVideoAniSignalCapability OBJECT-TYPE This attribute indicates the capability of the ONT to measure the video signal level. Capabilities are indicated by code points: 0 No signal level capability. 1 Total optical power level. 2 Fixed frequency pilot tone power level. 3 Total optical power level and fixed frequency pilot tone power level. 4 Variable frequency pilot tone power level. 5 Total optical power level and variable frequency pilot tone power level. 6 Broadband RF power level. 7 Total optical power level and broadband RF power level. 8..255 Reserved. | 1.3.6.1.4.1.6296.101.23.6.8.1.1.8 | INTEGER {noSignal(0), totalOptical(1), fixedFrequencyPilotTone(2), totalOpticalAndFixedFrequencyPilotTone(3), variableFrequencyPilotTone(4), totalOpticalAndVariableFrequencyPilotTone(5), broadbandRF(6), totalOpticalAndBroadbandRF(7)} | read-only | current |
| sleGponOnuVideoAniOpticalSignalLevel OBJECT-TYPE This attribute is an unsigned integer that returns the current measurement of the total optical signal level. The unit of this attribute is dBm optical. If signal capability = 0, 2, 4 or 6, this attribute is undefined. If signal capability =1, 3, 5 or 7, this attribute describes the total optical power that is generating photocurrent on the receiver. | 1.3.6.1.4.1.6296.101.23.6.8.1.1.9 | Integer32 (1..255) | read-only | current |
| sleGponOnuVideoAniPilotSignalLevel OBJECT-TYPE This attribute indicates the current measurement of the pilot signal level or broadband RF level. The unit of this attribute is dBuV at the RF video service port. If signal capability = 0 or 1, then this attribute is undefined. If signal capability = 2, 3, 4 or 5, this attribute reports the pilot signal level at the out put of the video UNI. If signal capability = 6 or 7, this attribute reports the total RF power level at the out put of the video UNI. | 1.3.6.1.4.1.6296.101.23.6.8.1.1.10 | Integer32 (1..255) | read-only | current |
| sleGponOnuVideoAniSignalLevelMin OBJECT-TYPE This attribute indicates the minimum optical RF power per channel that results in a CNR of 47 dBc for a channel of 4.5 MHz bandwidth at a receive optical power of -5 dBm. The unit of this attribute is dBuW optical. | 1.3.6.1.4.1.6296.101.23.6.8.1.1.11 | Integer32 (1..255) | read-only | current |
| sleGponOnuVideoAniSignalLevelMax OBJECT-TYPE This attribute indicates the maximum optical RF power per channel that results in a CTB of -57 dBc for an 80-channel ensemble of carriers at a per-channel optical modulation index of 3.5%. The unit of this attribute is dBuW optical. | 1.3.6.1.4.1.6296.101.23.6.8.1.1.12 | Integer32 (1..255) | read-only | current |
| sleGponOnuVideoAniPilotFreq OBJECT-TYPE This attribute specifies the frequency of the pilot channel receiver. The unit of this attribute is Hz. If signal capability = 0, 1, 6 or 7, this attribute is undefined. If signal capability = 2 or 3, this tionally read only. If signal capability = 4 or 5, this attribute is read-write. | 1.3.6.1.4.1.6296.101.23.6.8.1.1.13 | Integer32 (1..255) | read-only | current |
| sleGponOnuVideoAniAgcMode OBJECT-TYPE This attribute allows the discovery and configuration of the ONT's AGC capabilities. The attribute contains a codepoint for several AGC types. The ONT displays the currently used AGC mode. The OLT can discover new modes via the set command; the ONT denies attempts to set an unsupported mode. The code points are: 0 No AGC. 1 Broadband RF AGC. 2 Optical AGC. | 1.3.6.1.4.1.6296.101.23.6.8.1.1.14 | INTEGER {noAgc(0), broadbandRfAgc(1), opticalAgc(2)} | read-only | current |
| sleGponOnuVideoAniAgcSetting OBJECT-TYPE This attribute indicates the measurement offset that the ONT should use in AGC. The attribute has a step size of 0.1 dB, represented as a signed integer. The theoretical nominal RF signal is 80 channels of NTSC video, each having a per-channel optical modulation index of 3.5%. An ONT presented with such a signal should produce its specified ou tput when this attribute is set to zero. If total optical power is used for AGC, this attribute provides the OMI offset for any NTSC carriers present from the theoretical 3.5% value. For example, if the actual signal uses an OMI of 7.0% per channel (3 dB higher), then the ONT should be given an AGC setting of 30 (coded 0x1E). If broadband RF power is used for AGC, this attribute provides the total power offset for any NTSC carriers present from the theoretical 80 channel value. For example, if an actual signal contains 40 NTSC channels (3 dB lower), then the ONT should be given an AGC setting of <0096>30 (coded 0xE2). | 1.3.6.1.4.1.6296.101.23.6.8.1.1.15 | Integer32 (-128..127) | read-only | current |
| sleGponOnuVideoAniVideoLowerOpticalThr OBJECT-TYPE This attribute specifies the optical level used to declare the video OOR low alarm. Valid values are <0096>12 to +6 dBm in 0.1 dB increments, represented as a 2s complement integer (coding -120 to +60, where 0x00 = 0 dBm, 0x88 = -12.0 dBm, etc.). Upon ME instantiation, the ONT sets this attribute to 0xA1 (-9.5 dBm). (R, W) (optional) (1 byte) NOTE <0096> Because the power measurement returned in the optical signal level attribute has a resolution of 1 dB, it is possible that the measured value could appear to be in-range, even though an out-of-range alarm has been declared against a threshold with 0.1 dB resolution. | 1.3.6.1.4.1.6296.101.23.6.8.1.1.16 | Integer32 (1..255) | read-only | current |
| sleGponOnuVideoAniVideoUpperOpticalThr OBJECT-TYPE This attribute specifies the optical level used to declare the video OOR high alarm. Valid values are -12 to +6 dBm in 0.1 dB increments, represented as a 2s complement integer (coding -120 to +60, 0x00 = 0dBm, 0x88 = -12.0 dBm, etc.). Upon ME instantiation, the ONT sets this attribute to 0x19 (+2.5 dB m). | 1.3.6.1.4.1.6296.101.23.6.8.1.1.17 | Integer32 (1..255) | read-only | current |
| sleGponOnuVideoAniConfAgcSetting OBJECT-TYPE This attribute indicates the measurement offset that the ONT should use in AGC. The attribute has a step size of 0.1 dB, represented as a signed integer. The theoretical nominal RF signal is 80 channels of NTSC video, each having a per-channel optical modulation index of 3.5%. An ONT presented with such a signal should produce its specified ou tput when this attribute is set to zero. If total optical power is used for AGC, this attribute provides the OMI offset for any NTSC carriers present from the theoretical 3.5% value. For example, if the actual signal uses an OMI of 7.0% per channel (3 dB higher), then the ONT should be given an AGC setting of 30 (coded 0x1E). If broadband RF power is used for AGC, this attribute provides the total power offset for any NTSC carriers present from the theoretical 80 channel value. For example, if an actual signal contains 40 NTSC channels (3 dB lower), then the ONT should be given an AGC setting of <0096>30 (coded 0xE2). | 1.3.6.1.4.1.6296.101.23.6.8.1.1.18 | Integer32 (-128..127) | read-only | current |
| sleGponOnuVideoAniControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.8.2 | |||
| sleGponOnuVideoAniControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.6.8.2.1 | INTEGER {updateVideoAniStatus(1), setVideoAniAgc(2)} | read-write | current |
| sleGponOnuVideoAniControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.6.8.2.2 | SleControlStatusType | read-only | current |
| sleGponOnuVideoAniControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.6.8.2.3 | Gauge32 | read-write | current |
| sleGponOnuVideoAniControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.6.8.2.4 | TimeTicks | read-only | current |
| sleGponOnuVideoAniControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.6.8.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOnuVideoAniControlOltIndex OBJECT-TYPE The OLT index. | 1.3.6.1.4.1.6296.101.23.6.8.2.6 | Integer32 (1..2147483647) | read-write | current |
| sleGponOnuVideoAniControlOnuIndex OBJECT-TYPE The ONU index. | 1.3.6.1.4.1.6296.101.23.6.8.2.7 | Integer32 (1..256) | read-write | current |
| sleGponOnuVideoAniControlAniIndex OBJECT-TYPE The ANI index. | 1.3.6.1.4.1.6296.101.23.6.8.2.8 | Integer32 (1..65535) | read-write | current |
| sleGponOnuVideoAniControlConfAgcSetting OBJECT-TYPE This attribute indicates the measurement offset that the ONT should use in AGC. The attribute has a step size of 0.1 dB, represented as a signed integer. The theoretical nominal RF signal is 80 channels of NTSC video, each having a per-channel optical modulation index of 3.5%. An ONT presented with such a signal should produce its specified ou tput when this attribute is set to zero. If total optical power is used for AGC, this attribute provides the OMI offset for any NTSC carriers present from the theoretical 3.5% value. For example, if the actual signal uses an OMI of 7.0% per channel (3 dB higher), then the ONT should be given an AGC setting of 30 (coded 0x1E). If broadband RF power is used for AGC, this attribute provides the total power offset for any NTSC carriers present from the theoretical 80 channel value. For example, if an actual signal contains 40 NTSC channels (3 dB lower), then the ONT should be given an AGC setting of <0096>30 (coded 0xE2). | 1.3.6.1.4.1.6296.101.23.6.8.2.9 | Integer32 (-128..127) | read-write | current |
| sleGponOnuVideoAniNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.8.3 | |||
| sleGponOnuPortMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.9 | |||
| sleGponOnuPppoe OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.10 | |||
| sleGponOnuPppoeTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.6.10.1 | not-accessible | current | |
| sleGponOnuPppoeEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.6.10.1.1 | not-accessible | current | |
| sleGponOnuPppoeIndex OBJECT-TYPE The PPPoE Index. | 1.3.6.1.4.1.6296.101.23.6.10.1.1.1 | Integer32 (0..65535) | read-only | current |
| sleGponOnuPppoeAdminState OBJECT-TYPE This attribute specifies the type of Administrative State. Valid values are enable (1) and disable (2). | 1.3.6.1.4.1.6296.101.23.6.10.1.1.2 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleGponOnuPppoeStatus OBJECT-TYPE This attribute specifies the type of PPPoE connection status. 1 Non Configured : PPPoE mode is enable. but username, password, authentication type is not configured yet. 2 Connect Progress : When try to connect PPPoE. 3 Non Authenticated : PPPoE mode is enable, but PPPoE login is failed. (wrong username or password) 4 Authenticated : When PPPoE client succeed to Login. | 1.3.6.1.4.1.6296.101.23.6.10.1.1.3 | INTEGER {nonConfigure(1), connectProgress(2), nonAuthenticated(3), authenticated(4)} | read-only | current |
| sleGponOnuPppoeAuthType OBJECT-TYPE This attribute specifies the type of PPPoE Authentication. | 1.3.6.1.4.1.6296.101.23.6.10.1.1.4 | INTEGER {chap(1), pap(2)} | read-only | current |
| sleGponOnuPppoeUsername OBJECT-TYPE This attribute points a large string that contains the username of PPPoE authentication. | 1.3.6.1.4.1.6296.101.23.6.10.1.1.5 | OCTET STRING | read-only | current |
| sleGponOnuPppoePassword OBJECT-TYPE This attribute points a large string that contains the password of PPPoE authentication. | 1.3.6.1.4.1.6296.101.23.6.10.1.1.6 | OCTET STRING | read-only | current |
| sleGponOnuPppoeMtu OBJECT-TYPE This attribute specifies the value of MTU. Default value is 1492. | 1.3.6.1.4.1.6296.101.23.6.10.1.1.7 | Integer32 (128..1500) | read-only | current |
| sleGponOnuPppoeLCPInterval OBJECT-TYPE This attribute specifies the value of LCP Intervals between PPPoE server and client. Default value is 20. | 1.3.6.1.4.1.6296.101.23.6.10.1.1.8 | Integer32 (10..3600) | read-only | current |
| sleGponOnuPppoeControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.10.2 | |||
| sleGponOnuPppoeControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.6.10.2.1 | INTEGER {updatePppoeStatus(1)} | read-write | current |
| sleGponOnuPppoeControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.6.10.2.2 | SleControlStatusType | read-only | current |
| sleGponOnuPppoeControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.6.10.2.3 | Gauge32 | read-write | current |
| sleGponOnuPppoeiControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.6.10.2.4 | TimeTicks | read-only | current |
| sleGponOnuPppoeControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.6.10.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOnuPppoeControlOltIndex OBJECT-TYPE The OLT index. | 1.3.6.1.4.1.6296.101.23.6.10.2.6 | Integer32 (1..2147483647) | read-write | current |
| sleGponOnuPppoeControlOnuIndex OBJECT-TYPE The ONU index.. | 1.3.6.1.4.1.6296.101.23.6.10.2.7 | Integer32 (1..256) | read-write | current |
| sleGponOnuPppoeControlIndex OBJECT-TYPE The PPPoE index. | 1.3.6.1.4.1.6296.101.23.6.10.2.8 | Integer32 | read-write | current |
| sleGponOnuPppoeNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.6.10.3 | |||
| sleGponStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.7 | |||
| sleGponOltStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.7.1 | |||
| sleGponOltStatsTable OBJECT-TYPE sleGponOltStatsTable | 1.3.6.1.4.1.6296.101.23.7.1.1 | not-accessible | current | |
| sleGponOltStatsEntry OBJECT-TYPE key: sleGponOltId | 1.3.6.1.4.1.6296.101.23.7.1.1.1 | not-accessible | current | |
| sleGponOltStatsPonValidEthPacketsRx OBJECT-TYPE UpStream(Rx), N/A | 1.3.6.1.4.1.6296.101.23.7.1.1.1.1 | Counter64 | read-only | current |
| sleGponOltStatsPonCpuPacketsRx OBJECT-TYPE UpStream(Rx), N/A | 1.3.6.1.4.1.6296.101.23.7.1.1.1.2 | Counter64 | read-only | current |
| sleGponOltStatsPonPloamsRx OBJECT-TYPE UpStream(Rx) | 1.3.6.1.4.1.6296.101.23.7.1.1.1.3 | Counter64 | read-only | current |
| sleGponOltStatsPonInvalidPacketsRx OBJECT-TYPE UpStream(Rx) | 1.3.6.1.4.1.6296.101.23.7.1.1.1.4 | Counter64 | read-only | current |
| sleGponOltStatsPonValidEthPacketsTx OBJECT-TYPE DownStream(Tx) | 1.3.6.1.4.1.6296.101.23.7.1.1.1.5 | Counter64 | read-only | current |
| sleGponOltStatsPonCpuPacketsTx OBJECT-TYPE DownStream(Tx) | 1.3.6.1.4.1.6296.101.23.7.1.1.1.6 | Counter64 | read-only | current |
| sleGponOltStatsPonPloamsTx OBJECT-TYPE DownStream(Tx) | 1.3.6.1.4.1.6296.101.23.7.1.1.1.7 | Counter64 | read-only | current |
| sleGponOltStatsPonInvalidPacketsTx OBJECT-TYPE N/A | 1.3.6.1.4.1.6296.101.23.7.1.1.1.8 | Counter64 | read-only | current |
| sleGponOltStatsPerfRxValidPackets OBJECT-TYPE UpStream(Rx) | 1.3.6.1.4.1.6296.101.23.7.1.1.1.9 | Counter64 | read-only | current |
| sleGponOltStatsPerfRxErroredPackets OBJECT-TYPE UpStream(Rx) | 1.3.6.1.4.1.6296.101.23.7.1.1.1.10 | Counter64 | read-only | current |
| sleGponOltStatsPerfCRCdroppedPackets OBJECT-TYPE UpStream(Rx) | 1.3.6.1.4.1.6296.101.23.7.1.1.1.11 | Counter64 | read-only | current |
| sleGponOltStatsAllocTable OBJECT-TYPE sleGponOltStatsAllocTable | 1.3.6.1.4.1.6296.101.23.7.1.2 | not-accessible | current | |
| sleGponOltStatsAllocEntry OBJECT-TYPE key: sleGponOltId, sleGponOltStatsAllocId | 1.3.6.1.4.1.6296.101.23.7.1.2.1 | not-accessible | current | |
| sleGponOltStatsAllocId OBJECT-TYPE Alloc-Id | 1.3.6.1.4.1.6296.101.23.7.1.2.1.1 | INTEGER (256..1023) | read-only | current |
| sleGponOltStatsAllocDataRx OBJECT-TYPE The total value of received data in bytes per Alloc-Id. | 1.3.6.1.4.1.6296.101.23.7.1.2.1.2 | Counter64 | read-only | current |
| sleGponOltStatsOnuTable OBJECT-TYPE sleGponOltStatsOnuTable | 1.3.6.1.4.1.6296.101.23.7.1.3 | not-accessible | current | |
| sleGponOltStatsOnuEntry OBJECT-TYPE key: sleGponOltId, sleGponOnuId | 1.3.6.1.4.1.6296.101.23.7.1.3.1 | not-accessible | current | |
| sleGponOltStatsOnuPonUnreceivedBursts OBJECT-TYPE Returns the number of unreceived bursts per ONU-Id. | 1.3.6.1.4.1.6296.101.23.7.1.3.1.1 | Counter64 | read-only | current |
| sleGponOltStatsOnuPonPositiveDrift OBJECT-TYPE Returns accumulated positive drifts value in bits. | 1.3.6.1.4.1.6296.101.23.7.1.3.1.2 | Counter64 | read-only | current |
| sleGponOltStatsOnuNegativeDrift OBJECT-TYPE Returns accumulated negative drifts value in bits. | 1.3.6.1.4.1.6296.101.23.7.1.3.1.3 | Counter64 | read-only | current |
| sleGponOltStatsOnuPonBip8Errors OBJECT-TYPE Returns the number of BIP8 errors. | 1.3.6.1.4.1.6296.101.23.7.1.3.1.4 | Counter64 | read-only | current |
| sleGponOltStatsOnuPonFecCorrectedBytes OBJECT-TYPE Returns FEC Corrected Bytes statistics. | 1.3.6.1.4.1.6296.101.23.7.1.3.1.5 | Counter64 | read-only | current |
| sleGponOltStatsOnuPonFecUncorrectedCodewords OBJECT-TYPE Returns FEC Corrected Codewords statistics. | 1.3.6.1.4.1.6296.101.23.7.1.3.1.6 | Counter64 | read-only | current |
| sleGponOltStatsOnuPonFecCorrectedCodewords OBJECT-TYPE Returns FEC Uncorrectable Codewords statistics. | 1.3.6.1.4.1.6296.101.23.7.1.3.1.7 | Counter64 | read-only | current |
| sleGponOltStatsOnuPonFecReceivedCodewords OBJECT-TYPE Returns FEC Total number of received Codewords statistics. | 1.3.6.1.4.1.6296.101.23.7.1.3.1.8 | Counter64 | read-only | current |
| sleGponOltStatsOnuAlarmSf OBJECT-TYPE The OLT statistics alarm SF counter | 1.3.6.1.4.1.6296.101.23.7.1.3.1.9 | Counter32 | read-only | current |
| sleGponOltStatsOnuAlarmSd OBJECT-TYPE The OLT statistics alarm SD counter | 1.3.6.1.4.1.6296.101.23.7.1.3.1.10 | Counter32 | read-only | current |
| sleGponOltStatsOnuElapsedTimeAfterClear OBJECT-TYPE The OLT statistics alarm elapsed time | 1.3.6.1.4.1.6296.101.23.7.1.3.1.11 | TimeTicks | read-only | current |
| sleGponOltStatsOnuBipReiErrors OBJECT-TYPE The ONU statistics alarm Bip REI errors | 1.3.6.1.4.1.6296.101.23.7.1.3.1.12 | Counter64 | read-only | current |
| sleGponOltStatsControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.7.1.4 | |||
| sleGponOltStatsControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.7.1.4.1 | INTEGER {clearGponOltStatistics(1), clearGponOltActivationStatistics(2), clearGponOltOnuStatistics(3), clearGponOltAlarmStatistics(4)} | read-write | current |
| sleGponOltStatsControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.7.1.4.2 | SleControlStatusType | read-only | current |
| sleGponOltStatsControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.7.1.4.3 | Gauge32 | read-write | current |
| sleGponOltStatsControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.7.1.4.4 | TimeTicks | read-only | current |
| sleGponOltStatsControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.7.1.4.5 | SleControlRequestResultType | read-only | current |
| sleGponOltStatsControlOltIndex OBJECT-TYPE Profile Id | 1.3.6.1.4.1.6296.101.23.7.1.4.6 | INTEGER (1..2147483647) | read-write | current |
| sleGponOltStatsControlOnuIndex OBJECT-TYPE Profile Name | 1.3.6.1.4.1.6296.101.23.7.1.4.7 | INTEGER (1..65535) | read-write | current |
| sleGponOltStatsNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.7.1.5 | |||
| sleGponOnuPMStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.7.2 | |||
| sleGponOnuPMStatsTable OBJECT-TYPE sleGponOnuPMStatsTable | 1.3.6.1.4.1.6296.101.23.7.2.1 | not-accessible | current | |
| sleGponOnuPMStatsEntry OBJECT-TYPE key: sleGponOltId, sleGponOnuId | 1.3.6.1.4.1.6296.101.23.7.2.1.1 | not-accessible | current | |
| sleGponOnuPMStatsPrev15mLostPackets OBJECT-TYPE This attribute counts background GEM frame loss. | 1.3.6.1.4.1.6296.101.23.7.2.1.1.1 | Counter64 | read-only | current |
| sleGponOnuPMStatsPrev15mMisInsertedPackets OBJECT-TYPE This attribute counts GEM frames misrouted to this GEM port. | 1.3.6.1.4.1.6296.101.23.7.2.1.1.2 | Counter64 | read-only | current |
| sleGponOnuPMStatsPrev15mReceivedPackets OBJECT-TYPE This attribute counts GEM frames that were received correctly at the monitored GEM port. | 1.3.6.1.4.1.6296.101.23.7.2.1.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsPrev15mReceivedBlocks OBJECT-TYPE This attribute counts GEM blocks that were received correctly at the monitored GEM port. | 1.3.6.1.4.1.6296.101.23.7.2.1.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsPrev15mTransmittedBlocks OBJECT-TYPE This attribute counts GEM blocks originated by the transmitting end point | 1.3.6.1.4.1.6296.101.23.7.2.1.1.5 | Counter64 | read-only | current |
| sleGponOnuPMStatsPrev15mImpairedBlocks OBJECT-TYPE This attribute counts GEM blocks originated by the number of misinserted packets reaches its threshold. | 1.3.6.1.4.1.6296.101.23.7.2.1.1.6 | Counter64 | read-only | current |
| sleGponOnuPMStatsPrev15mDiscardedFrames OBJECT-TYPE This attribute counts the number of downstream GEM frames discarded for any reason (erroneous FCS, too long length, buffer overflow, etc) | 1.3.6.1.4.1.6296.101.23.7.2.1.1.7 | Counter64 | read-only | current |
| sleGponOnuPMStatsPrev30mLostPackets OBJECT-TYPE This attribute counts background GEM frame loss. | 1.3.6.1.4.1.6296.101.23.7.2.1.1.8 | Counter64 | read-only | current |
| sleGponOnuPMStatsPrev30mMisInsertedPackets OBJECT-TYPE This attribute counts GEM frames misrouted to this GEM port. | 1.3.6.1.4.1.6296.101.23.7.2.1.1.9 | Counter64 | read-only | current |
| sleGponOnuPMStatsPrev30mReceivedPackets OBJECT-TYPE This attribute counts GEM frames that were received correctly at the monitored GEM port. | 1.3.6.1.4.1.6296.101.23.7.2.1.1.10 | Counter64 | read-only | current |
| sleGponOnuPMStatsPrev30mReceivedBlocks OBJECT-TYPE This attribute counts GEM blocks that were received correctly at the monitored GEM port. | 1.3.6.1.4.1.6296.101.23.7.2.1.1.11 | Counter64 | read-only | current |
| sleGponOnuPMStatsPrev30mTransmittedBlocks OBJECT-TYPE This attribute counts GEM blocks originated by the transmitting end point | 1.3.6.1.4.1.6296.101.23.7.2.1.1.12 | Counter64 | read-only | current |
| sleGponOnuPMStatsPrev30mImpairedBlocks OBJECT-TYPE This attribute counts GEM blocks originated by the number of misinserted packets reaches its threshold. | 1.3.6.1.4.1.6296.101.23.7.2.1.1.13 | Counter64 | read-only | current |
| sleGponOnuPMStatsPrev30mDiscardedFrames OBJECT-TYPE This attribute counts the number of downstream GEM frames discarded for any reason (erroneous FCS, too long length, buffer overflow, etc) | 1.3.6.1.4.1.6296.101.23.7.2.1.1.14 | Counter64 | read-only | current |
| sleGponOnuPMStatsTotalLostPackets OBJECT-TYPE This attribute counts background GEM frame loss. | 1.3.6.1.4.1.6296.101.23.7.2.1.1.15 | Counter64 | read-only | current |
| sleGponOnuPMStatsTotalMisInsertedPackets OBJECT-TYPE This attribute counts GEM frames misrouted to this GEM port. | 1.3.6.1.4.1.6296.101.23.7.2.1.1.16 | Counter64 | read-only | current |
| sleGponOnuPMStatsTotalReceivedPackets OBJECT-TYPE This attribute counts GEM frames that were received correctly at the monitored GEM port. | 1.3.6.1.4.1.6296.101.23.7.2.1.1.17 | Counter64 | read-only | current |
| sleGponOnuPMStatsTotalReceivedBlocks OBJECT-TYPE This attribute counts GEM blocks that were received correctly at the monitored GEM port. | 1.3.6.1.4.1.6296.101.23.7.2.1.1.18 | Counter64 | read-only | current |
| sleGponOnuPMStatsTotalTransmittedBlocks OBJECT-TYPE This attribute counts GEM blocks originated by the transmitting end point | 1.3.6.1.4.1.6296.101.23.7.2.1.1.19 | Counter64 | read-only | current |
| sleGponOnuPMStatsTotalImpairedBlocks OBJECT-TYPE This attribute counts GEM blocks originated by the number of misinserted packets reaches its threshold. | 1.3.6.1.4.1.6296.101.23.7.2.1.1.20 | Counter64 | read-only | current |
| sleGponOnuPMStatsTotalDiscardedFrames OBJECT-TYPE This attribute counts the number of downstream GEM frames discarded for any reason (erroneous FCS, too long length, buffer overflow, etc) | 1.3.6.1.4.1.6296.101.23.7.2.1.1.21 | Counter64 | read-only | current |
| sleGponOnuPMStatsElapsedTimeAfterClear OBJECT-TYPE ONU PM counter time after Clear | 1.3.6.1.4.1.6296.101.23.7.2.1.1.22 | TimeTicks | read-only | current |
| sleGponOnuPMStatsElapsedTimeAfterUpdate OBJECT-TYPE ONU PM counter time after update | 1.3.6.1.4.1.6296.101.23.7.2.1.1.23 | Counter64 | read-only | current |
| sleGponOnuPMStatsControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.7.2.2 | |||
| sleGponOnuPMStatsControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.7.2.2.1 | INTEGER {clearPmStats(1), setCurrentDetailStats(2)} | read-write | current |
| sleGponOnuPMStatsControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.7.2.2.2 | SleControlStatusType | read-only | current |
| sleGponOnuPMStatsControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.7.2.2.3 | Gauge32 | read-write | current |
| sleGponOnuPMStatsControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.7.2.2.4 | TimeTicks | read-only | current |
| sleGponOnuPMStatsControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.7.2.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOnuPMStatsControlOltIndex OBJECT-TYPE The OLT index. | 1.3.6.1.4.1.6296.101.23.7.2.2.6 | Integer32 (1..2147483647) | read-write | current |
| sleGponOnuPMStatsControlOnuIndex OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.7.2.2.7 | Integer32 | read-write | current |
| sleGponOnuPMStatsNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.7.2.3 | |||
| sleGponOnuPMStatisticsDetail OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.7.3 | |||
| sleGponOnuPMStatsDetailGEMTable OBJECT-TYPE sleGponOnuPMStatsDetailGEMTable | 1.3.6.1.4.1.6296.101.23.7.3.1 | not-accessible | current | |
| sleGponOnuPMStatsDetailGEMEntry OBJECT-TYPE key: sleGponOnuPMStatsDetailGEMPort, sleGponOltId, sleGponOnuId | 1.3.6.1.4.1.6296.101.23.7.3.1.1 | not-accessible | current | |
| sleGponOnuPMStatsDetailGEMPortIndex OBJECT-TYPE The GEM port index. | 1.3.6.1.4.1.6296.101.23.7.3.1.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponOnuPMStatsDetailGEMPort OBJECT-TYPE The GEM port information | 1.3.6.1.4.1.6296.101.23.7.3.1.1.2 | INTEGER (1..65535) | read-only | current |
| sleGponOnuPMStatsDetailGEMPre15mLostPackets OBJECT-TYPE The pre 15 minute number of lost packet | 1.3.6.1.4.1.6296.101.23.7.3.1.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMPre15mMisInsertedPackets OBJECT-TYPE The pre 15 minute number of mis inserted packet | 1.3.6.1.4.1.6296.101.23.7.3.1.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMPre15mReceivedPackets OBJECT-TYPE The pre 15 minute number of received packet | 1.3.6.1.4.1.6296.101.23.7.3.1.1.5 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMPre15mReceivedBlocks OBJECT-TYPE The pre 15 minute number of received blocks | 1.3.6.1.4.1.6296.101.23.7.3.1.1.6 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMPre15mTransmittedBlocks OBJECT-TYPE The pre 15 minute number of transmitted blocks | 1.3.6.1.4.1.6296.101.23.7.3.1.1.7 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMPre15mImpairedBlocks OBJECT-TYPE The pre 15 minute number of impaired blocks | 1.3.6.1.4.1.6296.101.23.7.3.1.1.8 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMHourLostPackets OBJECT-TYPE The hour number of lost packet | 1.3.6.1.4.1.6296.101.23.7.3.1.1.9 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMHourMisInsertedPackets OBJECT-TYPE The hour number of mis inserted packet | 1.3.6.1.4.1.6296.101.23.7.3.1.1.10 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMHourReceivedPackets OBJECT-TYPE The hour number of received packet | 1.3.6.1.4.1.6296.101.23.7.3.1.1.11 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailGEMHourReceivedBlocks OBJECT-TYPE The hour number of received blocks | 1.3.6.1.4.1.6296.101.23.7.3.1.1.12 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailGEMHourTransmittedBlocks OBJECT-TYPE The hour number of transmitted blocks | 1.3.6.1.4.1.6296.101.23.7.3.1.1.13 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMHourImpairedBlocks OBJECT-TYPE The hour number of impaired blocks | 1.3.6.1.4.1.6296.101.23.7.3.1.1.14 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailGEMDayLostPackets OBJECT-TYPE The day number of lost packet | 1.3.6.1.4.1.6296.101.23.7.3.1.1.15 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailGEMDayMisInsertedPackets OBJECT-TYPE The day number of mis inserted packet | 1.3.6.1.4.1.6296.101.23.7.3.1.1.16 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailGEMDayReceivedPackets OBJECT-TYPE The day number of received packet | 1.3.6.1.4.1.6296.101.23.7.3.1.1.17 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailGEMDayReceivedBlocks OBJECT-TYPE The day number of received blocks | 1.3.6.1.4.1.6296.101.23.7.3.1.1.18 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailGEMDayTransmittedBlocks OBJECT-TYPE The day number of transmitted blocks | 1.3.6.1.4.1.6296.101.23.7.3.1.1.19 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailGEMDayImpairedBlocks OBJECT-TYPE The day number of impaired blocks | 1.3.6.1.4.1.6296.101.23.7.3.1.1.20 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailGEMTotalLostPackets OBJECT-TYPE The total number of lost packet | 1.3.6.1.4.1.6296.101.23.7.3.1.1.21 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailGEMTotalMisInsertedPackets OBJECT-TYPE The total number of mis inserted packet | 1.3.6.1.4.1.6296.101.23.7.3.1.1.22 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailGEMTotalReceivedPackets OBJECT-TYPE The total number of received packet | 1.3.6.1.4.1.6296.101.23.7.3.1.1.23 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailGEMTotalReceivedBlocks OBJECT-TYPE The total number of received blocks | 1.3.6.1.4.1.6296.101.23.7.3.1.1.24 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailGEMTotalTransmittedBlocks OBJECT-TYPE The total number of transmitted blocks | 1.3.6.1.4.1.6296.101.23.7.3.1.1.25 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailGEMTotalImpairedBlocks OBJECT-TYPE The total number of impaired blocks | 1.3.6.1.4.1.6296.101.23.7.3.1.1.26 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailGEMElapsedTimeAfterClear OBJECT-TYPE The number of packets for elapsed time after clear | 1.3.6.1.4.1.6296.101.23.7.3.1.1.27 | TimeTicks | read-only | current |
| sleGponOnuPMStatsDetailGEMElapsedTimeAfterUpdate OBJECT-TYPE The number of packets for elapsed time after update | 1.3.6.1.4.1.6296.101.23.7.3.1.1.28 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailAniTable OBJECT-TYPE sleGponOnuPMStatsDetailAniTable | 1.3.6.1.4.1.6296.101.23.7.3.2 | not-accessible | current | |
| sleGponOnuPMStatsDetailAniEntry OBJECT-TYPE key: sleGponOnuPMStatsDetailAniPort, sleGponOltId, sleGponOnuId | 1.3.6.1.4.1.6296.101.23.7.3.2.1 | not-accessible | current | |
| sleGponOnuPMStatsDetailAniPortIndex OBJECT-TYPE The ANI port index. | 1.3.6.1.4.1.6296.101.23.7.3.2.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponOnuPMStatsDetailAniPort OBJECT-TYPE The Ani port information | 1.3.6.1.4.1.6296.101.23.7.3.2.1.2 | INTEGER (1..65535) | read-only | current |
| sleGponOnuPMStatsDetailAniPre15mDiscardedFrames OBJECT-TYPE The pre 15 minute number of lost discarded frames | 1.3.6.1.4.1.6296.101.23.7.3.2.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailAniHourDiscardedFrames OBJECT-TYPE The hour number of lost discarded frames | 1.3.6.1.4.1.6296.101.23.7.3.2.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailAniDayDiscardedFrames OBJECT-TYPE The day number of lost discarded frames | 1.3.6.1.4.1.6296.101.23.7.3.2.1.5 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailAniTotalDiscardedFrames OBJECT-TYPE The total number of lost discarded frames | 1.3.6.1.4.1.6296.101.23.7.3.2.1.6 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailAniElapsedTimeAfterClear OBJECT-TYPE The number of packets for elapsed time after clear | 1.3.6.1.4.1.6296.101.23.7.3.2.1.7 | TimeTicks | read-only | current |
| sleGponOnuPMStatsDetailAniElapsedTimeAfterUpdate OBJECT-TYPE The number of packets for elapsed time after update | 1.3.6.1.4.1.6296.101.23.7.3.2.1.8 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEthFrameUpTable OBJECT-TYPE sleGponOnuPMStatsDetailUniEthFrameUpTable | 1.3.6.1.4.1.6296.101.23.7.3.3 | not-accessible | current | |
| sleGponOnuPMStatsDetailUniEthFrameUpEntry OBJECT-TYPE key: sleGponOltId, sleGponOnuId, sleGponOnuPMStatsDetailUniEthFrameUpUniPort | 1.3.6.1.4.1.6296.101.23.7.3.3.1 | not-accessible | current | |
| sleGponOnuPMStatsDetailUniEthFrameUpUniPort OBJECT-TYPE The Uni port information | 1.3.6.1.4.1.6296.101.23.7.3.3.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpPre15mDropEvents OBJECT-TYPE The pre 15 minute number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.3.3.1.2 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpPre15mOctets OBJECT-TYPE The pre 15 minute number of octets received | 1.3.6.1.4.1.6296.101.23.7.3.3.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpPre15mPackets OBJECT-TYPE The pre 15 minute number of packets received, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpPre15mBcastPackets OBJECT-TYPE The pre 15 minute number of received good packets directed to the broadcast address | 1.3.6.1.4.1.6296.101.23.7.3.3.1.5 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpPre15mMcastPackets OBJECT-TYPE The pre 15 minute number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.3.3.1.6 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpPre15mUcastPackets OBJECT-TYPE The pre 15 minute number of received good packets directed to the unicast address | 1.3.6.1.4.1.6296.101.23.7.3.3.1.7 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpPre15mCRCErroredPackets OBJECT-TYPE The pre 15 minute number of packets received that had a length | 1.3.6.1.4.1.6296.101.23.7.3.3.1.8 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpPre15mUndersizePackets OBJECT-TYPE The pre 15 minute number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.3.3.1.9 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpPre15mOversizePackets OBJECT-TYPE The pre 15 minute number of packets received that were longer than 1518 octets | 1.3.6.1.4.1.6296.101.23.7.3.3.1.10 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpPre15mPkt64Octets OBJECT-TYPE The pre 15 minute number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.11 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpPre15mPkt65To127Octets OBJECT-TYPE The pre 15 minute number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.12 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpPre15mPkt128To255Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.13 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpPre15mPkt256To511Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.14 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpPre15mPkt512To1023Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.15 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpPre15mPkt1024To1518Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.16 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpHourDropEvents OBJECT-TYPE The hour number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.3.3.1.17 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpHourOctets OBJECT-TYPE The hour number of octets received | 1.3.6.1.4.1.6296.101.23.7.3.3.1.18 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpHourPackets OBJECT-TYPE The hour number of packets received, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.19 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpHourBcastPackets OBJECT-TYPE The hour number of received good packets directed to the broadcast address | 1.3.6.1.4.1.6296.101.23.7.3.3.1.20 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEthFrameUpHourMcastPackets OBJECT-TYPE The hour number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.3.3.1.21 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpHourUcastPackets OBJECT-TYPE The hour number of received good packets directed to the unicast address | 1.3.6.1.4.1.6296.101.23.7.3.3.1.22 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpHourCRCErroredPackets OBJECT-TYPE The hour number of packets received that had a length | 1.3.6.1.4.1.6296.101.23.7.3.3.1.23 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpHourUndersizePackets OBJECT-TYPE The hour number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.3.3.1.24 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpHourOversizePackets OBJECT-TYPE The hour number of packets received that were longer than 1518 octets | 1.3.6.1.4.1.6296.101.23.7.3.3.1.25 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpHourPkt64Octets OBJECT-TYPE The hour number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.26 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpHourPkt65To127Octets OBJECT-TYPE The hour number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.27 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpHourPkt128To255Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.28 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEthFrameUpHourPkt256To511Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.29 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpHourPkt512To1023Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.30 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEthFrameUpHourPkt1024To1518Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.31 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpDayDropEvents OBJECT-TYPE The day number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.3.3.1.32 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpDayOctets OBJECT-TYPE The day number of octets received | 1.3.6.1.4.1.6296.101.23.7.3.3.1.33 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpDayPackets OBJECT-TYPE The day number of packets received, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.34 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpDayBcastPackets OBJECT-TYPE The day number of received good packets directed to the broadcast address | 1.3.6.1.4.1.6296.101.23.7.3.3.1.35 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEthFrameUpDayMcastPackets OBJECT-TYPE The day number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.3.3.1.36 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpDayUcastPackets OBJECT-TYPE The day number of received good packets directed to the unicast address | 1.3.6.1.4.1.6296.101.23.7.3.3.1.37 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpDayCRCErroredPackets OBJECT-TYPE The day number of packets received that had a length | 1.3.6.1.4.1.6296.101.23.7.3.3.1.38 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpDayUndersizePackets OBJECT-TYPE The day number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.3.3.1.39 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpDayOversizePackets OBJECT-TYPE The day number of packets received that were longer than 1518 octets | 1.3.6.1.4.1.6296.101.23.7.3.3.1.40 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpDayPkt64Octets OBJECT-TYPE The day number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.41 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpDayPkt65To127Octets OBJECT-TYPE The day number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.42 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpDayPkt128To255Octets OBJECT-TYPE The day number of received packets (including bad packets) that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.43 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEthFrameUpDayPkt256To511Octets OBJECT-TYPE The day number of received packets (including bad packets) that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.44 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpDayPkt512To1023Octets OBJECT-TYPE The day number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.45 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEthFrameUpDayPkt1024To1518Octets OBJECT-TYPE The day number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.46 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpTotalDropEvents OBJECT-TYPE The total number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.3.3.1.47 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpTotalOctets OBJECT-TYPE The total number of octets received | 1.3.6.1.4.1.6296.101.23.7.3.3.1.48 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpTotalPackets OBJECT-TYPE The total number of packets received, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.49 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpTotalBcastPackets OBJECT-TYPE The total number of received good packets directed to a broadcast address. | 1.3.6.1.4.1.6296.101.23.7.3.3.1.50 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEthFrameUpTotalMcastPackets OBJECT-TYPE The total number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.3.3.1.51 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpTotalUcastPackets OBJECT-TYPE The total number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.3.3.1.52 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpTotalCRCErroredPackets OBJECT-TYPE The total number of packets received that had a length | 1.3.6.1.4.1.6296.101.23.7.3.3.1.53 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpTotalUndersizePackets OBJECT-TYPE The total number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.3.3.1.54 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpTotalOversizePackets OBJECT-TYPE The total number of packets received that were longer than 1518 octets | 1.3.6.1.4.1.6296.101.23.7.3.3.1.55 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpTotalPkt64Octets OBJECT-TYPE The total number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.56 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpTotalPkt65To127Octets OBJECT-TYPE The total number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.57 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpTotalPkt128To255Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.58 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEthFrameUpTotalPkt256To511Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.59 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpTotalPkt512To1023Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.60 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEthFrameUpTotalPkt1024To1518Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.3.1.61 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpElapsedTimeAfterClear OBJECT-TYPE The total number of packets for elapsed time after clear | 1.3.6.1.4.1.6296.101.23.7.3.3.1.62 | TimeTicks | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameUpElapsedTimeAfterUpdate OBJECT-TYPE The total number of packets for elapsed time after update | 1.3.6.1.4.1.6296.101.23.7.3.3.1.63 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownTable OBJECT-TYPE sleGponOnuPMStatsDetailUniEthFrameDownTable | 1.3.6.1.4.1.6296.101.23.7.3.4 | not-accessible | current | |
| sleGponOnuPMStatsDetailUniEthFrameDownEntry OBJECT-TYPE key: sleGponOltId, sleGponOnuId, sleGponOnuPMStatsDetailUniEthFrameUpUniPort | 1.3.6.1.4.1.6296.101.23.7.3.4.1 | not-accessible | current | |
| sleGponOnuPMStatsDetailUniEthFrameDownUniPort OBJECT-TYPE sleGponOltId, sleGponOnuId, sleGponOnuPMStatsDetailUniEthFrameUpUniPort | 1.3.6.1.4.1.6296.101.23.7.3.4.1.1 | Integer32 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownPre15mDropEvents OBJECT-TYPE The pre 15 minute number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.3.4.1.2 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownPre15mOctets OBJECT-TYPE The pre 15 minute number of octets received | 1.3.6.1.4.1.6296.101.23.7.3.4.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownPre15mPackets OBJECT-TYPE The pre 15 minute number of packets received, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownPre15mBcastPackets OBJECT-TYPE The pre 15 minute number of received good packets directed to the broadcast address | 1.3.6.1.4.1.6296.101.23.7.3.4.1.5 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownPre15mMcastPackets OBJECT-TYPE The pre 15 minute number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.3.4.1.6 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownPre15mUcastPackets OBJECT-TYPE The pre 15 minute number of received good packets directed to the unicast address | 1.3.6.1.4.1.6296.101.23.7.3.4.1.7 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownPre15mCRCErroredPackets OBJECT-TYPE The pre 15 minute number of packets received that had a length | 1.3.6.1.4.1.6296.101.23.7.3.4.1.8 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownPre15mUndersizePackets OBJECT-TYPE The pre 15 minute number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.3.4.1.9 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownPre15mOversizePackets OBJECT-TYPE The pre 15 minute number of packets received that were longer than 1518 octets | 1.3.6.1.4.1.6296.101.23.7.3.4.1.10 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownPre15mPkt64Octets OBJECT-TYPE The pre 15 minute number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.11 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownPre15mPkt65To127Octets OBJECT-TYPE The pre 15 minute number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.12 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownPre15mPkt128To255Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.13 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownPre15mPkt256To511Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.14 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownPre15mPkt512To1023Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.15 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownPre15mPkt1024To1518Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.16 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownHourDropEvents OBJECT-TYPE The hour number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.3.4.1.17 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownHourOctets OBJECT-TYPE The hour number of octets received | 1.3.6.1.4.1.6296.101.23.7.3.4.1.18 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownHourPackets OBJECT-TYPE The hour number of packets received, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.19 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownHourBcastPackets OBJECT-TYPE The hour number of received good packets directed to the broadcast address | 1.3.6.1.4.1.6296.101.23.7.3.4.1.20 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEthFrameDownHourMcastPackets OBJECT-TYPE The hour number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.3.4.1.21 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownHourUcastPackets OBJECT-TYPE The hour number of received good packets directed to the unicast address | 1.3.6.1.4.1.6296.101.23.7.3.4.1.22 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownHourCRCErroredPackets OBJECT-TYPE The hour number of packets received that had a length | 1.3.6.1.4.1.6296.101.23.7.3.4.1.23 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownHourUndersizePackets OBJECT-TYPE The hour number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.3.4.1.24 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownHourOversizePackets OBJECT-TYPE The hour number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.25 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownHourPkt64Octets OBJECT-TYPE The hour number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.26 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownHourPkt65To127Octets OBJECT-TYPE The hour number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.27 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownHourPkt128To255Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.28 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEthFrameDownHourPkt256To511Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.29 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownHourPkt512To1023Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.30 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEthFrameDownHourPkt1024To1518Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.31 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownDayDropEvents OBJECT-TYPE The day number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.3.4.1.32 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownDayOctets OBJECT-TYPE The day number of octets received | 1.3.6.1.4.1.6296.101.23.7.3.4.1.33 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownDayPackets OBJECT-TYPE The day number of packets received, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.34 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownDayBcastPackets OBJECT-TYPE The day number of received good packets directed to a broadcast address. | 1.3.6.1.4.1.6296.101.23.7.3.4.1.35 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEthFrameDownDayMcastPackets OBJECT-TYPE The day number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.3.4.1.36 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownDayUcastPackets OBJECT-TYPE The day number of received good packets directed to the unicast address | 1.3.6.1.4.1.6296.101.23.7.3.4.1.37 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownDayCRCErroredPackets OBJECT-TYPE The day number of packets received that had a length | 1.3.6.1.4.1.6296.101.23.7.3.4.1.38 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownDayUndersizePackets OBJECT-TYPE The day number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.3.4.1.39 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownDayOversizePackets OBJECT-TYPE The day number of packets received that were longer than 1518 octets | 1.3.6.1.4.1.6296.101.23.7.3.4.1.40 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownDayPkt64Octets OBJECT-TYPE The day number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.41 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownDayPkt65To127Octets OBJECT-TYPE The day number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.42 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownDayPkt128To255Octets OBJECT-TYPE The day number of received packets (including bad packets) that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.43 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEthFrameDownDayPkt256To511Octets OBJECT-TYPE The day number of packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.44 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownDayPkt512To1023Octets OBJECT-TYPE The day number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.45 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEthFrameDownDayPkt1024To1518Octets OBJECT-TYPE The day number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.46 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownTotalDropEvents OBJECT-TYPE The total number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.3.4.1.47 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownTotalOctets OBJECT-TYPE The total number of octets received | 1.3.6.1.4.1.6296.101.23.7.3.4.1.48 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownTotalPackets OBJECT-TYPE The total number of packets received, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.49 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownTotalBcastPackets OBJECT-TYPE The total number of received good packets directed to a broadcast address. | 1.3.6.1.4.1.6296.101.23.7.3.4.1.50 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEthFrameDownTotalMcastPackets OBJECT-TYPE The total number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.3.4.1.51 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownTotalUcastPackets OBJECT-TYPE The total number of received good packets directed to the unicast address | 1.3.6.1.4.1.6296.101.23.7.3.4.1.52 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownTotalCRCErroredPackets OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.7.3.4.1.53 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownTotalUndersizePackets OBJECT-TYPE The total number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.3.4.1.54 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownTotalOversizePackets OBJECT-TYPE The total number of packets received that were longer than 1518 octets | 1.3.6.1.4.1.6296.101.23.7.3.4.1.55 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownTotalPkt64Octets OBJECT-TYPE The total number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.56 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownTotalPkt65To127Octets OBJECT-TYPE The total number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.57 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownTotalPkt128To255Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.58 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEthFrameDownTotalPkt256To511Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.59 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownTotalPkt512To1023Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.60 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEthFrameDownTotalPkt1024To1518Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.4.1.61 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownElapsedTimeAfterClear OBJECT-TYPE The total number of packets for elapsed time after clear | 1.3.6.1.4.1.6296.101.23.7.3.4.1.62 | TimeTicks | read-only | current |
| sleGponOnuPMStatsDetailUniEthFrameDownElapsedTimeAfterUpdate OBJECT-TYPE The total number of packets for elapsed time after update | 1.3.6.1.4.1.6296.101.23.7.3.4.1.63 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3Table OBJECT-TYPE sleGponOnuPMStatsDetailUniEth3Table | 1.3.6.1.4.1.6296.101.23.7.3.5 | not-accessible | current | |
| sleGponOnuPMStatsDetailUniEth3Entry OBJECT-TYPE key: sleGponOltId, sleGponOnuId, sleGponOnuPMStatsDetailUniEthFrameUpUniPort | 1.3.6.1.4.1.6296.101.23.7.3.5.1 | not-accessible | current | |
| sleGponOnuPMStatsDetailUniEth3UniPort OBJECT-TYPE The Uni port information | 1.3.6.1.4.1.6296.101.23.7.3.5.1.1 | Integer32 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3Pre15mDropEvents OBJECT-TYPE The pre 15 minute number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.3.5.1.2 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3Pre15mOctets OBJECT-TYPE The pre 15 minute number of octets received | 1.3.6.1.4.1.6296.101.23.7.3.5.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3Pre15mPackets OBJECT-TYPE The pre 15 minute number of packets received, including bad packets | 1.3.6.1.4.1.6296.101.23.7.3.5.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3Pre15mBcastPackets OBJECT-TYPE The pre 15 minute number of received good packets directed to the broadcast address. | 1.3.6.1.4.1.6296.101.23.7.3.5.1.5 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3Pre15mMcastPackets OBJECT-TYPE The pre 15 minute number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.3.5.1.6 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3Pre15mUcastPackets OBJECT-TYPE The pre 15 minute number of received good packets directed to a unicast address. | 1.3.6.1.4.1.6296.101.23.7.3.5.1.7 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3Pre15mUndersizePackets OBJECT-TYPE The pre 15 minute number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.3.5.1.8 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3Pre15mFragments OBJECT-TYPE The pre 15 minute number of packets received that were fragments | 1.3.6.1.4.1.6296.101.23.7.3.5.1.9 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3Pre15mJabbers OBJECT-TYPE The pre 15 minute number of packets received that were jabbers | 1.3.6.1.4.1.6296.101.23.7.3.5.1.10 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3Pre15mPkt64Octets OBJECT-TYPE The pre 15 minute number of received packets (including bad packets) that were 64 octets long | 1.3.6.1.4.1.6296.101.23.7.3.5.1.11 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3Pre15mPkt65To127Octets OBJECT-TYPE The pre 15 minute number of received packets (including bad packets) that were 65..127 octets long | 1.3.6.1.4.1.6296.101.23.7.3.5.1.12 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3Pre15mPkt128To255Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 128..255 octets long | 1.3.6.1.4.1.6296.101.23.7.3.5.1.13 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3Pre15mPkt256To511Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 256..511 octets long | 1.3.6.1.4.1.6296.101.23.7.3.5.1.14 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3Pre15mPkt512To1023Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 512..1023 octets long | 1.3.6.1.4.1.6296.101.23.7.3.5.1.15 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3Pre15mPkt1024To1518Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 1024..1518 octets long | 1.3.6.1.4.1.6296.101.23.7.3.5.1.16 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3HourDropEvents OBJECT-TYPE The hour number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.3.5.1.17 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3HourOctets OBJECT-TYPE The hour number of octets received | 1.3.6.1.4.1.6296.101.23.7.3.5.1.18 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3HourPackets OBJECT-TYPE The hour number of packets received, | 1.3.6.1.4.1.6296.101.23.7.3.5.1.19 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3HourBcastPackets OBJECT-TYPE The hour number of received good packets directed to the broadcast address | 1.3.6.1.4.1.6296.101.23.7.3.5.1.20 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEth3HourMcastPackets OBJECT-TYPE The hour number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.3.5.1.21 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3HourUcastPackets OBJECT-TYPE The hour number of received good packets directed to the unicast address | 1.3.6.1.4.1.6296.101.23.7.3.5.1.22 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3HourUndersizePackets OBJECT-TYPE The hour number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.3.5.1.23 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3HourFragments OBJECT-TYPE The hour number of packets received that were fragments | 1.3.6.1.4.1.6296.101.23.7.3.5.1.24 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3HourJabbers OBJECT-TYPE The hour number of packets received that were jabbers | 1.3.6.1.4.1.6296.101.23.7.3.5.1.25 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3HourPkt64Octets OBJECT-TYPE The hour number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.5.1.26 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3HourPkt65To127Octets OBJECT-TYPE The hour number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.5.1.27 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3HourPkt128To255Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.5.1.28 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEth3HourPkt256To511Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.5.1.29 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3HourPkt512To1023Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.5.1.30 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEth3HourPkt1024To1518Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.5.1.31 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3DayDropEvents OBJECT-TYPE The day number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.3.5.1.32 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3DayOctets OBJECT-TYPE The day number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.3.5.1.33 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3DayPackets OBJECT-TYPE The day number of octets received | 1.3.6.1.4.1.6296.101.23.7.3.5.1.34 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3DayBcastPackets OBJECT-TYPE The day number of received good packets directed to the broadcast address | 1.3.6.1.4.1.6296.101.23.7.3.5.1.35 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEth3DayMcastPackets OBJECT-TYPE The day number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.3.5.1.36 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3DayUcastPackets OBJECT-TYPE The day number of received good packets directed to the unicast address | 1.3.6.1.4.1.6296.101.23.7.3.5.1.37 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3DayUndersizePackets OBJECT-TYPE The day number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.3.5.1.38 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3DayFragments OBJECT-TYPE The day number of packets received that were fragments | 1.3.6.1.4.1.6296.101.23.7.3.5.1.39 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3DayJabbers OBJECT-TYPE The day number of packets received that were jabbers | 1.3.6.1.4.1.6296.101.23.7.3.5.1.40 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3DayPkt64Octets OBJECT-TYPE The day number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.5.1.41 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3DayPkt65To127Octets OBJECT-TYPE The day number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.5.1.42 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3DayPkt128To255Octets OBJECT-TYPE The day number of received packets (including bad packets) that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.5.1.43 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEth3DayPkt256To511Octets OBJECT-TYPE The day number of received packets (including bad packets) that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.5.1.44 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3DayPkt512To1023Octets OBJECT-TYPE The day number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.5.1.45 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEth3DayPkt1024To1518Octets OBJECT-TYPE The day number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.5.1.46 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3TotalDropEvents OBJECT-TYPE The total number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.3.5.1.47 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3TotalOctets OBJECT-TYPE The total number of octets received | 1.3.6.1.4.1.6296.101.23.7.3.5.1.48 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3TotalPackets OBJECT-TYPE The total number of packets received, | 1.3.6.1.4.1.6296.101.23.7.3.5.1.49 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3TotalBcastPackets OBJECT-TYPE The total number of received good packets directed to the broadcast address | 1.3.6.1.4.1.6296.101.23.7.3.5.1.50 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEth3TotalMcastPackets OBJECT-TYPE The total number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.3.5.1.51 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3TotalUcastPackets OBJECT-TYPE The total number of received good packets directed to the unicast address | 1.3.6.1.4.1.6296.101.23.7.3.5.1.52 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3TotalUndersizePackets OBJECT-TYPE The total number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.3.5.1.53 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3TotalFragments OBJECT-TYPE The total number of packets received (fragments) | 1.3.6.1.4.1.6296.101.23.7.3.5.1.54 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3TotalJabbers OBJECT-TYPE The total number of packets received (jabbers) | 1.3.6.1.4.1.6296.101.23.7.3.5.1.55 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3TotalPkt64Octets OBJECT-TYPE The total number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.5.1.56 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3TotalPkt65To127Octets OBJECT-TYPE The total number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.5.1.57 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3TotalPkt128To255Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.5.1.58 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEth3TotalPkt256To511Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.5.1.59 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3TotalPkt512To1023Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.5.1.60 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailUniEth3TotalPkt1024To1518Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.3.5.1.61 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailUniEth3ElapsedTimeAfterClear OBJECT-TYPE The number of packets for elapsed time after clear | 1.3.6.1.4.1.6296.101.23.7.3.5.1.62 | TimeTicks | read-only | current |
| sleGponOnuPMStatsDetailUniEth3ElapsedTimeAfterUpdate OBJECT-TYPE The number of packets for elapsed time after update | 1.3.6.1.4.1.6296.101.23.7.3.5.1.63 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTPTable OBJECT-TYPE sleGponOnuPMStatsDetailUniEth3Table | 1.3.6.1.4.1.6296.101.23.7.3.6 | not-accessible | current | |
| sleGponOnuPMStatsDetailGEMNCTPEntry OBJECT-TYPE key: sleGponOltId, sleGponOnuId, sleGponOnuPMStatsDetailUniEthFrameUpUniPort | 1.3.6.1.4.1.6296.101.23.7.3.6.1 | not-accessible | current | |
| sleGponOnuPMStatsDetailGEMNCTPIndex OBJECT-TYPE The GEM Nctp index. | 1.3.6.1.4.1.6296.101.23.7.3.6.1.1 | Integer32 (0..65535) | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTP OBJECT-TYPE The GEM Nctp | 1.3.6.1.4.1.6296.101.23.7.3.6.1.2 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTPPre15mRxGemFrames OBJECT-TYPE The pre 15 minute number of Rx Gem Frames | 1.3.6.1.4.1.6296.101.23.7.3.6.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTPPre15mTxGemFrames OBJECT-TYPE The pre 15 minute number of Tx Gem Frames | 1.3.6.1.4.1.6296.101.23.7.3.6.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTPPre15mRxPayloadByte OBJECT-TYPE The pre 15 minute number of Rx Payload Byte | 1.3.6.1.4.1.6296.101.23.7.3.6.1.5 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTPPre15mTxPayloadByte OBJECT-TYPE The pre 15 minute number of Tx Payload Byte. | 1.3.6.1.4.1.6296.101.23.7.3.6.1.6 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTPPre15mEncryptionKeyError OBJECT-TYPE The pre 15 minute number of Encryption Key Error | 1.3.6.1.4.1.6296.101.23.7.3.6.1.7 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTPHourRxGemFrames OBJECT-TYPE The hour number of Rx Gem Frames | 1.3.6.1.4.1.6296.101.23.7.3.6.1.8 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTPHourTxGemFrames OBJECT-TYPE The hour number of Tx Gem Frames | 1.3.6.1.4.1.6296.101.23.7.3.6.1.9 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTPHourRxPayloadByte OBJECT-TYPE The hour number of Rx Payload Byte | 1.3.6.1.4.1.6296.101.23.7.3.6.1.10 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTPHourTxPayloadByte OBJECT-TYPE The hour number of Tx Payload Byte | 1.3.6.1.4.1.6296.101.23.7.3.6.1.11 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTPHourEncryptionKeyError OBJECT-TYPE The hour number of Encryption Key Error | 1.3.6.1.4.1.6296.101.23.7.3.6.1.12 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTPDayRxGemFrames OBJECT-TYPE The day number of Rx Gem Frames | 1.3.6.1.4.1.6296.101.23.7.3.6.1.13 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTPDayTxGemFrames OBJECT-TYPE The day number of Tx Gem Frames | 1.3.6.1.4.1.6296.101.23.7.3.6.1.14 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTPDayRxPayloadByte OBJECT-TYPE The day number of Rx Payload Byte | 1.3.6.1.4.1.6296.101.23.7.3.6.1.15 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTPDayTxPayloadByte OBJECT-TYPE The day number of Tx Payload Byte | 1.3.6.1.4.1.6296.101.23.7.3.6.1.16 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTPDayEncryptionKeyError OBJECT-TYPE The day number of Encryption Key Error | 1.3.6.1.4.1.6296.101.23.7.3.6.1.17 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTPTotalRxGemFrames OBJECT-TYPE The total number of Rx Gem Frames | 1.3.6.1.4.1.6296.101.23.7.3.6.1.18 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTPTotalTxGemFrames OBJECT-TYPE The total number of Tx Gem Frames | 1.3.6.1.4.1.6296.101.23.7.3.6.1.19 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTPTotalRxPayloadByte OBJECT-TYPE The total number of Rx Payload Byte | 1.3.6.1.4.1.6296.101.23.7.3.6.1.20 | Counter64 | read-write | current |
| sleGponOnuPMStatsDetailGEMNCTPTotalTxPayloadByte OBJECT-TYPE The total number of Tx Payload Byte | 1.3.6.1.4.1.6296.101.23.7.3.6.1.21 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTPTotalEncryptionKeyError OBJECT-TYPE The total number of Encryption Key Error | 1.3.6.1.4.1.6296.101.23.7.3.6.1.22 | Counter64 | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTPElapsedTimeAfterClear OBJECT-TYPE The number of packets for elapsed time after clear | 1.3.6.1.4.1.6296.101.23.7.3.6.1.23 | TimeTicks | read-only | current |
| sleGponOnuPMStatsDetailGEMNCTPElapsedTimeAfterUpdate OBJECT-TYPE The number of packets for elapsed time after update | 1.3.6.1.4.1.6296.101.23.7.3.6.1.24 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetail OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.7.4 | |||
| sleGponOnuPMStatsCurrentDetailGEMTable OBJECT-TYPE sleGponOnuPMStatsCurrentDetailGEMTable | 1.3.6.1.4.1.6296.101.23.7.4.1 | not-accessible | current | |
| sleGponOnuPMStatsCurrentDetailGEMEntry OBJECT-TYPE key: sleGponOltId, sleGponOnuId, sleGponOnuPMStatsCurrentDetailGEMPortIndex | 1.3.6.1.4.1.6296.101.23.7.4.1.1 | not-accessible | current | |
| sleGponOnuPMStatsCurrentDetailGEMPortIndex OBJECT-TYPE The GEM port index. | 1.3.6.1.4.1.6296.101.23.7.4.1.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponOnuPMStatsCurrentDetailGEMPort OBJECT-TYPE The GEM port information | 1.3.6.1.4.1.6296.101.23.7.4.1.1.2 | INTEGER (1..65535) | read-only | current |
| sleGponOnuPMStatsCurrentDetailGEMLostPackets OBJECT-TYPE The number of lost packet | 1.3.6.1.4.1.6296.101.23.7.4.1.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailGEMMisInsertedPackets OBJECT-TYPE The number of mis inserted packet | 1.3.6.1.4.1.6296.101.23.7.4.1.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailGEMReceivedPackets OBJECT-TYPE The number of received packet | 1.3.6.1.4.1.6296.101.23.7.4.1.1.5 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailGEMReceivedBlocks OBJECT-TYPE The number of received blocks | 1.3.6.1.4.1.6296.101.23.7.4.1.1.6 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailGEMTransmittedBlocks OBJECT-TYPE The number of transmitted blocks | 1.3.6.1.4.1.6296.101.23.7.4.1.1.7 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailGEMImpairedBlocks OBJECT-TYPE The number of impaired blocks | 1.3.6.1.4.1.6296.101.23.7.4.1.1.8 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailAniTable OBJECT-TYPE sleGponOnuPMStatsCurrentDetailAniTable | 1.3.6.1.4.1.6296.101.23.7.4.2 | not-accessible | current | |
| sleGponOnuPMStatsCurrentDetailAniEntry OBJECT-TYPE key: sleGponOltId, sleGponOnuId, sleGponOnuPMStatsCurrentDetailAniPortIndex | 1.3.6.1.4.1.6296.101.23.7.4.2.1 | not-accessible | current | |
| sleGponOnuPMStatsCurrentDetailAniPortIndex OBJECT-TYPE The ANI port index. | 1.3.6.1.4.1.6296.101.23.7.4.2.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponOnuPMStatsCurrentDetailAniPort OBJECT-TYPE The Ani port information | 1.3.6.1.4.1.6296.101.23.7.4.2.1.2 | INTEGER (1..65535) | read-only | current |
| sleGponOnuPMStatsCurrentDetailAniDiscardedFrames OBJECT-TYPE The number of lost discarded frames | 1.3.6.1.4.1.6296.101.23.7.4.2.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameUpTable OBJECT-TYPE sleGponOnuPMStatsCurrentDetailUniEthFrameUpTable | 1.3.6.1.4.1.6296.101.23.7.4.3 | not-accessible | current | |
| sleGponOnuPMStatsCurrentDetailUniEthFrameUpEntry OBJECT-TYPE key: sleGponOltId, sleGponOnuId, sleGponOnuPMStatsCurrentDetailUniEthFrameUpUniPort | 1.3.6.1.4.1.6296.101.23.7.4.3.1 | not-accessible | current | |
| sleGponOnuPMStatsCurrentDetailUniEthFrameUpUniPort OBJECT-TYPE The Uni port information | 1.3.6.1.4.1.6296.101.23.7.4.3.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameUpDropEvents OBJECT-TYPE The number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.4.3.1.2 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameUpOctets OBJECT-TYPE The number of octets received | 1.3.6.1.4.1.6296.101.23.7.4.3.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameUpPackets OBJECT-TYPE The number of packets received, | 1.3.6.1.4.1.6296.101.23.7.4.3.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameUpBcastPackets OBJECT-TYPE The number of received good packets directed to the broadcast address | 1.3.6.1.4.1.6296.101.23.7.4.3.1.5 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameUpMcastPackets OBJECT-TYPE The number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.4.3.1.6 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameUpUcastPackets OBJECT-TYPE The number of received good packets directed to the unicast address | 1.3.6.1.4.1.6296.101.23.7.4.3.1.7 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameUpCRCErroredPackets OBJECT-TYPE The number of packets received that had a length | 1.3.6.1.4.1.6296.101.23.7.4.3.1.8 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameUpUndersizePackets OBJECT-TYPE The number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.4.3.1.9 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameUpOversizePackets OBJECT-TYPE The number of packets received that were longer than 1518 octets | 1.3.6.1.4.1.6296.101.23.7.4.3.1.10 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameUpPkt64Octets OBJECT-TYPE The number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.4.3.1.11 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameUpPkt65To127Octets OBJECT-TYPE The number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.4.3.1.12 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameUpPkt128To255 OBJECT-TYPE The number of packets (including bad packets) received that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.4.3.1.13 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameUpPkt256To511 OBJECT-TYPE The number of packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.4.3.1.14 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameUpPkt512To1023 OBJECT-TYPE The number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.4.3.1.15 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameUpPkt1024To1518 OBJECT-TYPE The number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.4.3.1.16 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameUpAvgPackets OBJECT-TYPE 1.3.6.1.4.1.6296.101.23.7.4.3.1.17 | 1.3.6.1.4.1.6296.101.23.7.4.3.1.17 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameUpAvgBits OBJECT-TYPE 1.3.6.1.4.1.6296.101.23.7.4.3.1.18 | 1.3.6.1.4.1.6296.101.23.7.4.3.1.18 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameTotalUpAvgPackets OBJECT-TYPE 1.3.6.1.4.1.6296.101.23.7.4.3.1.19 | 1.3.6.1.4.1.6296.101.23.7.4.3.1.19 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameTotalUpAvgBits OBJECT-TYPE 1.3.6.1.4.1.6296.101.23.7.4.3.1.20 | 1.3.6.1.4.1.6296.101.23.7.4.3.1.20 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameDownTable OBJECT-TYPE sleGponOnuPMStatsCurrentDetailUniEthFrameDownTable | 1.3.6.1.4.1.6296.101.23.7.4.4 | not-accessible | current | |
| sleGponOnuPMStatsCurrentDetailUniEthFrameDownEntry OBJECT-TYPE key: sleGponOltId, sleGponOnuId, sleGponOnuPMStatsCurrentDetailUniEthFrameDownUniPort | 1.3.6.1.4.1.6296.101.23.7.4.4.1 | not-accessible | current | |
| sleGponOnuPMStatsCurrentDetailUniEthFrameDownUniPort OBJECT-TYPE sleGponOltId, sleGponOnuId, sleGponOnuPMStatsDetailUniEthFrameUpUniPort | 1.3.6.1.4.1.6296.101.23.7.4.4.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameDownDropEvents OBJECT-TYPE The pre 15 minute number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.4.4.1.2 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameDownOctets OBJECT-TYPE The pre 15 minute number of octets received | 1.3.6.1.4.1.6296.101.23.7.4.4.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameDownPackets OBJECT-TYPE The pre 15 minute number of packets received, | 1.3.6.1.4.1.6296.101.23.7.4.4.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameDownBcastPackets OBJECT-TYPE The pre 15 minute number of received good packets directed to the broadcast address | 1.3.6.1.4.1.6296.101.23.7.4.4.1.5 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameDownMcastPackets OBJECT-TYPE The pre 15 minute number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.4.4.1.6 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameDownUcastPackets OBJECT-TYPE The pre 15 minute number of received good packets directed to the unicast address | 1.3.6.1.4.1.6296.101.23.7.4.4.1.7 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameDownCRCErroredPackets OBJECT-TYPE The pre 15 minute number of packets received that had a length | 1.3.6.1.4.1.6296.101.23.7.4.4.1.8 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameDownUndersizePackets OBJECT-TYPE The pre 15 minute number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.4.4.1.9 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameDownOversizePackets OBJECT-TYPE The pre 15 minute number of packets received that were longer than 1518 octets | 1.3.6.1.4.1.6296.101.23.7.4.4.1.10 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameDownPkt64Octets OBJECT-TYPE The pre 15 minute number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.4.4.1.11 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameDownPkt65To127Octets OBJECT-TYPE The pre 15 minute number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.4.4.1.12 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameDownPkt128To255Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.4.4.1.13 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameDownmPkt256To511Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.4.4.1.14 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameDownmPkt512To1023Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.4.4.1.15 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameDownPkt1024To1518Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.4.4.1.16 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameDownAvgPackets OBJECT-TYPE 1.3.6.1.4.1.6296.101.23.7.4.4.1.17 | 1.3.6.1.4.1.6296.101.23.7.4.4.1.17 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameDownAvgBits OBJECT-TYPE 1.3.6.1.4.1.6296.101.23.7.4.4.1.18 | 1.3.6.1.4.1.6296.101.23.7.4.4.1.18 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameTotalDownAvgPackets OBJECT-TYPE 1.3.6.1.4.1.6296.101.23.7.4.4.1.19 | 1.3.6.1.4.1.6296.101.23.7.4.4.1.19 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEthFrameTotalDownAvgBits OBJECT-TYPE 1.3.6.1.4.1.6296.101.23.7.4.4.1.20 | 1.3.6.1.4.1.6296.101.23.7.4.4.1.20 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEth3Table OBJECT-TYPE sleGponOnuPMStatsCurrentDetailUniEth3Table | 1.3.6.1.4.1.6296.101.23.7.4.5 | not-accessible | current | |
| sleGponOnuPMStatsCurrentDetailUniEth3Entry OBJECT-TYPE key: sleGponOltId, sleGponOnuId, sleGponOnuPMStatsCurrentDetailUniEth3UniPort | 1.3.6.1.4.1.6296.101.23.7.4.5.1 | not-accessible | current | |
| sleGponOnuPMStatsCurrentDetailUniEth3UniPort OBJECT-TYPE The Uni port information | 1.3.6.1.4.1.6296.101.23.7.4.5.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEth3DropEvents OBJECT-TYPE The number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.4.5.1.2 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEth3Octets OBJECT-TYPE The number of octets received | 1.3.6.1.4.1.6296.101.23.7.4.5.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEth3Packets OBJECT-TYPE The number of packets received, including bad packets | 1.3.6.1.4.1.6296.101.23.7.4.5.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEth3BcastPackets OBJECT-TYPE The number of received good packets directed to the broadcast address. | 1.3.6.1.4.1.6296.101.23.7.4.5.1.5 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEth3McastPackets OBJECT-TYPE The number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.4.5.1.6 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEth3UcastPackets OBJECT-TYPE The number of received good packets directed to a unicast address. | 1.3.6.1.4.1.6296.101.23.7.4.5.1.7 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEth3UndersizePackets OBJECT-TYPE The number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.4.5.1.8 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEth3Fragments OBJECT-TYPE The number of packets received that were fragments | 1.3.6.1.4.1.6296.101.23.7.4.5.1.9 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEth3Jabbers OBJECT-TYPE The number of packets received that were jabbers | 1.3.6.1.4.1.6296.101.23.7.4.5.1.10 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEth3Pkt64Octets OBJECT-TYPE The number of received packets (including bad packets) that were 64 octets long | 1.3.6.1.4.1.6296.101.23.7.4.5.1.11 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEth3Pkt65To127Octets OBJECT-TYPE The number of received packets (including bad packets) that were 65..127 octets long | 1.3.6.1.4.1.6296.101.23.7.4.5.1.12 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEth3Pkt128To255Octets OBJECT-TYPE The number of packets (including bad packets) received that were 128..255 octets long | 1.3.6.1.4.1.6296.101.23.7.4.5.1.13 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEth3Pkt256To511Octets OBJECT-TYPE The number of packets (including bad packets) received that were 256..511 octets long | 1.3.6.1.4.1.6296.101.23.7.4.5.1.14 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEth3Pkt512To1023Octets OBJECT-TYPE The number of packets (including bad packets) received that were 512..1023 octets long | 1.3.6.1.4.1.6296.101.23.7.4.5.1.15 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailUniEth3Pkt1024To1518Octets OBJECT-TYPE The number of packets (including bad packets) received that were 1024..1518 octets long | 1.3.6.1.4.1.6296.101.23.7.4.5.1.16 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailGEMNCTPTable OBJECT-TYPE sleGponOnuPMStatsCurrentDetailUniEth3Table | 1.3.6.1.4.1.6296.101.23.7.4.6 | not-accessible | current | |
| sleGponOnuPMStatsCurrentDetailGEMNCTPEntry OBJECT-TYPE key: sleGponOltId, sleGponOnuId, sleGponOnuPMStatsCurrentDetailUniEth3UniPort | 1.3.6.1.4.1.6296.101.23.7.4.6.1 | not-accessible | current | |
| sleGponOnuPMStatsCurrentDetailGEMNCTPIndex OBJECT-TYPE The GEM NCTP index. | 1.3.6.1.4.1.6296.101.23.7.4.6.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponOnuPMStatsCurrentDetailGEMNCTP OBJECT-TYPE The GEM NCTP | 1.3.6.1.4.1.6296.101.23.7.4.6.1.2 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailGEMNCTPRxGemFrames OBJECT-TYPE The number of Rx Gem Frames | 1.3.6.1.4.1.6296.101.23.7.4.6.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailGEMNCTPTxGemFrames OBJECT-TYPE The number of Tx Gem Frames | 1.3.6.1.4.1.6296.101.23.7.4.6.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailGEMNCTPRxPayloadByte OBJECT-TYPE The number of Rx Payload Byte | 1.3.6.1.4.1.6296.101.23.7.4.6.1.5 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailGEMNCTPTxPayloadByte OBJECT-TYPE The number of Tx Payload Byte | 1.3.6.1.4.1.6296.101.23.7.4.6.1.6 | Counter64 | read-only | current |
| sleGponOnuPMStatsCurrentDetailGEMNCTPEncryptionKeyError OBJECT-TYPE The number of Encryption Key Error | 1.3.6.1.4.1.6296.101.23.7.4.6.1.7 | Counter64 | read-only | current |
| sleGponOnuIgmpPmStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.7.5 | |||
| sleGponOnuIgmpPmStatisticsTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.7.5.1 | not-accessible | current | |
| sleGponOnuIgmpPmStatisticsEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.7.5.1.1 | not-accessible | current | |
| sleGponOnuIgmpPmStatisticsSlotType OBJECT-TYPE The slot type | 1.3.6.1.4.1.6296.101.23.7.5.1.1.1 | INTEGER {ethernet(1), pots(2), ces(3), video(4), virtualEthernet(5)} | read-only | current |
| sleGponOnuIgmpPmStatisticsPortIndex OBJECT-TYPE The port index. | 1.3.6.1.4.1.6296.101.23.7.5.1.1.2 | Integer32 (1..65535) | read-only | current |
| sleGponOnuIgmpPmStatisticsSuccessfulJoins OBJECT-TYPE The successful Joins. | 1.3.6.1.4.1.6296.101.23.7.5.1.1.3 | Integer32 | read-only | current |
| sleGponOnuIgmpPmStatisticsUnsuccessfulJoins OBJECT-TYPE The unsuccessful Joins. | 1.3.6.1.4.1.6296.101.23.7.5.1.1.4 | Integer32 | read-only | current |
| sleGponOnuIgmpPmStatisticsLeaveMessages OBJECT-TYPE The leave messages. | 1.3.6.1.4.1.6296.101.23.7.5.1.1.5 | Integer32 | read-only | current |
| sleGponOnuIgmpPmStatisticsGeneralQueries OBJECT-TYPE The General Queries | 1.3.6.1.4.1.6296.101.23.7.5.1.1.6 | Integer32 | read-only | current |
| sleGponOnuIgmpPmStatisticsSpecificQueries OBJECT-TYPE The Specific Queries | 1.3.6.1.4.1.6296.101.23.7.5.1.1.7 | Integer32 | read-only | current |
| sleGponOnuIgmpPmStatisticsInvalidIGMPMessages OBJECT-TYPE The Invalid IGMP Messages | 1.3.6.1.4.1.6296.101.23.7.5.1.1.8 | Integer32 | read-only | current |
| sleGponOnuIgmpPmStatisticsControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.7.5.2 | |||
| sleGponOnuIgmpPmStatisticsControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.7.5.2.1 | INTEGER {updateOnuIgmpPmData(1), clearOnuIgmpPmData(2)} | read-write | current |
| sleGponOnuIgmpPmStatisticsControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.7.5.2.2 | SleControlStatusType | read-only | current |
| sleGponOnuIgmpPmStatisticsControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.7.5.2.3 | Gauge32 | read-write | current |
| sleGponOnuIgmpPmStatisticsControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.7.5.2.4 | TimeTicks | read-only | current |
| sleGponOnuIgmpPmStatisticsControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.7.5.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOnuIgmpPmStatisticsControlOltIndex OBJECT-TYPE The OLT index. | 1.3.6.1.4.1.6296.101.23.7.5.2.6 | Integer32 (1..2147483647) | read-write | current |
| sleGponOnuIgmpPmStatisticsControlOnuIndex OBJECT-TYPE The ONU index. | 1.3.6.1.4.1.6296.101.23.7.5.2.7 | Integer32 | read-write | current |
| sleGponOnuIgmpPmStatisticsControlSlotType OBJECT-TYPE The slot type. | 1.3.6.1.4.1.6296.101.23.7.5.2.8 | INTEGER {ethernet(1), pots(2), ces(3), video(4), virtualEthernet(5)} | read-write | current |
| sleGponOnuIgmpPmStatisticsControlPortIndex OBJECT-TYPE The port index. | 1.3.6.1.4.1.6296.101.23.7.5.2.9 | Integer32 | read-write | current |
| sleGponOnuIgmpPmStatisticsNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.7.5.3 | |||
| sleGponOnuPmStatsUniAvg OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.7.6 | |||
| sleGponOnuPmStatsUniAvgTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.7.6.1 | not-accessible | current | |
| sleGponOnuPmStatsUniAvgEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.7.6.1.1 | not-accessible | current | |
| sleGponOnuPmStatsUniAvgPort OBJECT-TYPE The port index. | 1.3.6.1.4.1.6296.101.23.7.6.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponOnuPmStatsUniAvgEthFrameUpPackets OBJECT-TYPE The average frame up packets. | 1.3.6.1.4.1.6296.101.23.7.6.1.1.2 | Counter64 | read-only | current |
| sleGponOnuPmStatsUniAvgEthFrameUpBits OBJECT-TYPE The average frame up bits. | 1.3.6.1.4.1.6296.101.23.7.6.1.1.3 | Counter64 | read-only | current |
| sleGponOnuPmStatsUniAvgEthFrameDownPackets OBJECT-TYPE The average frame down packets. | 1.3.6.1.4.1.6296.101.23.7.6.1.1.4 | Counter64 | read-only | current |
| sleGponOnuPmStatsUniAvgEthFrameDownBits OBJECT-TYPE The average frame down bits. | 1.3.6.1.4.1.6296.101.23.7.6.1.1.5 | Counter64 | read-only | current |
| sleGponOnuPmStatsUniAvgControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.7.6.2 | |||
| sleGponOnuPmStatsUniAvgControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.7.6.2.1 | INTEGER {updateAvgStats(1)} | read-write | current |
| sleGponOnuPmStatsUniAvgControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.7.6.2.2 | SleControlStatusType | read-only | current |
| sleGponOnuPmStatsUniAvgControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.7.6.2.3 | Gauge32 | read-write | current |
| sleGponOnuPmStatsUniAvgControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.7.6.2.4 | TimeTicks | read-only | current |
| sleGponOnuPmStatsUniAvgControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.7.6.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOnuPmStatsUniAvgControlOltindex OBJECT-TYPE The OLT index. | 1.3.6.1.4.1.6296.101.23.7.6.2.6 | Integer32 (1..2147483647) | read-write | current |
| sleGponOnuPmStatsUniAvgControlOnuIndex OBJECT-TYPE The ONU index. | 1.3.6.1.4.1.6296.101.23.7.6.2.7 | Integer32 | read-write | current |
| sleGponOnuPmStatsUniAvgControlPort OBJECT-TYPE The port index. | 1.3.6.1.4.1.6296.101.23.7.6.2.8 | Integer32 | read-write | current |
| sleGponOnuPmStatsUniAvgNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.7.6.3 | |||
| sleGponOnuPMStatatisticsSum OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.7.7 | |||
| sleGponOnuPMStatsSumAllOnuGemTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.7.7.1 | not-accessible | current | |
| sleGponOnuPMStatsSumAllOnuGemEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.7.7.1.1 | not-accessible | current | |
| sleGponOnuPMStatsSumAllOnuGemLostPackets OBJECT-TYPE The sum total of all onu lost packet in olt | 1.3.6.1.4.1.6296.101.23.7.7.1.1.1 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuGemMisInsertedPackets OBJECT-TYPE The sum total of all onu mis inserted packet in olt | 1.3.6.1.4.1.6296.101.23.7.7.1.1.2 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuGemReceivedPackets OBJECT-TYPE The sum total of all onu received packet in olt | 1.3.6.1.4.1.6296.101.23.7.7.1.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuGemReceivedBlocks OBJECT-TYPE The sum total of all onu received blocks in olt | 1.3.6.1.4.1.6296.101.23.7.7.1.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuGemTransmittedBlocks OBJECT-TYPE The sum total of all onu transmitted blocks in olt | 1.3.6.1.4.1.6296.101.23.7.7.1.1.5 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuGemImpairedBlocks OBJECT-TYPE The sum total of all onu impaired blocks in olt | 1.3.6.1.4.1.6296.101.23.7.7.1.1.6 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuAniTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.7.7.2 | not-accessible | current | |
| sleGponOnuPMStatsSumAllOnuAniEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.7.7.2.1 | not-accessible | current | |
| sleGponOnuPMStatsSumAllOnuAniDiscardedFrames OBJECT-TYPE The sum total of all onu lost discarded frames | 1.3.6.1.4.1.6296.101.23.7.7.2.1.1 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameUpTable OBJECT-TYPE sleGponOnuPMStatsDetailUniEthFrameUpTable | 1.3.6.1.4.1.6296.101.23.7.7.3 | not-accessible | current | |
| sleGponOnuPMStatsSumAllOnuUniEthFrameUpEntry OBJECT-TYPE key: sleGponOltId, sleGponOnuId, sleGponOnuPMStatsDetailUniEthFrameUpUniPort | 1.3.6.1.4.1.6296.101.23.7.7.3.1 | not-accessible | current | |
| sleGponOnuPMStatsSumAllOnuUniEthFrameUpDropEvents OBJECT-TYPE The sum total of all onu events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.7.3.1.1 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameUpOctets OBJECT-TYPE The sum total of all onu octets received | 1.3.6.1.4.1.6296.101.23.7.7.3.1.2 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameUpPackets OBJECT-TYPE The sum total of all onu packets received, | 1.3.6.1.4.1.6296.101.23.7.7.3.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameUpBcastPackets OBJECT-TYPE The sum total of all onu received good packets directed to a broadcast address. | 1.3.6.1.4.1.6296.101.23.7.7.3.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameUpMcastPackets OBJECT-TYPE The sum total of all onu received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.7.3.1.5 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameUpUcastPackets OBJECT-TYPE The sum total of all onu received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.7.3.1.6 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameUpCRCErroredPackets OBJECT-TYPE The sum total of all onu packets received that had a length | 1.3.6.1.4.1.6296.101.23.7.7.3.1.7 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameUpUndersizePackets OBJECT-TYPE The sum total of all onu packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.7.3.1.8 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameUpOversizePackets OBJECT-TYPE The sum total of all onu packets received that were longer than 1518 octets | 1.3.6.1.4.1.6296.101.23.7.7.3.1.9 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameUpPkt64Octets OBJECT-TYPE The sum total of all onu received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.3.1.10 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameUpPkt65To127Octets OBJECT-TYPE The sum total of all onu received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.3.1.11 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameUpPkt128To255Octets OBJECT-TYPE The sum total of all onu packets (including bad packets) received that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.3.1.12 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameUpPkt256To511Octets OBJECT-TYPE The sum total of all onu packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.3.1.13 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameUpPkt512To1023Octets OBJECT-TYPE The sum total of all onu packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.3.1.14 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameUpPkt1024To1518Octets OBJECT-TYPE The sum total of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.3.1.15 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameDownTable OBJECT-TYPE sleGponOnuPMStatsDetailUniEthFrameUpTable | 1.3.6.1.4.1.6296.101.23.7.7.4 | not-accessible | current | |
| sleGponOnuPMStatsSumAllOnuUniEthFrameDownEntry OBJECT-TYPE key: sleGponOltId, sleGponOnuId, sleGponOnuPMStatsDetailUniEthFrameUpUniPort | 1.3.6.1.4.1.6296.101.23.7.7.4.1 | not-accessible | current | |
| sleGponOnuPMStatsSumAllOnuUniEthFrameDownDropEvents OBJECT-TYPE The sum total of all onu events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.7.4.1.1 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameDownOctets OBJECT-TYPE The sum total of all onu octets received | 1.3.6.1.4.1.6296.101.23.7.7.4.1.2 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameDownPackets OBJECT-TYPE The sum total of all onu packets received, | 1.3.6.1.4.1.6296.101.23.7.7.4.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameDownBcastPackets OBJECT-TYPE The sum total of all onu received good packets directed to a broadcast address. | 1.3.6.1.4.1.6296.101.23.7.7.4.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameDownMcastPackets OBJECT-TYPE The sum total of all onu received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.7.4.1.5 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameDownUcastPackets OBJECT-TYPE The sum total of all onu received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.7.4.1.6 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameDownCRCErroredPackets OBJECT-TYPE The sum total of all onu packets received that had a length | 1.3.6.1.4.1.6296.101.23.7.7.4.1.7 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameDownUndersizePackets OBJECT-TYPE The sum total of all onu packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.7.4.1.8 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameDownOversizePackets OBJECT-TYPE The sum total of all onu packets received that were longer than 1518 octets | 1.3.6.1.4.1.6296.101.23.7.7.4.1.9 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameDownPkt64Octets OBJECT-TYPE The sum total of all onu received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.4.1.10 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameDownPkt65To127Octets OBJECT-TYPE The sum total of all onu received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.4.1.11 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameDownPkt128To255Octets OBJECT-TYPE The sum total of all onu packets (including bad packets) received that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.4.1.12 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameDownPkt256To511Octets OBJECT-TYPE The sum total of all onu packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.4.1.13 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameDownPkt512To1023Octets OBJECT-TYPE The sum total of all onu packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.4.1.14 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEthFrameDownPkt1024To1518Octets OBJECT-TYPE The sum total of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.4.1.15 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEth3Table OBJECT-TYPE sleGponOnuPMStatsDetailUniEthFrameUpTable | 1.3.6.1.4.1.6296.101.23.7.7.5 | not-accessible | current | |
| sleGponOnuPMStatsSumAllOnuUniEth3Entry OBJECT-TYPE key: sleGponOltId, sleGponOnuId, sleGponOnuPMStatsDetailUniEthFrameUpUniPort | 1.3.6.1.4.1.6296.101.23.7.7.5.1 | not-accessible | current | |
| sleGponOnuPMStatsSumAllOnuUniEth3DropEvents OBJECT-TYPE The sum total of all onu events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.7.5.1.1 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEth3Octets OBJECT-TYPE The sum total of all onu octets received | 1.3.6.1.4.1.6296.101.23.7.7.5.1.2 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEth3Packets OBJECT-TYPE The sum total of all onu packets received, | 1.3.6.1.4.1.6296.101.23.7.7.5.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEth3BcastPackets OBJECT-TYPE The sum total of all onu received good packets directed to a broadcast address. | 1.3.6.1.4.1.6296.101.23.7.7.5.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEth3McastPackets OBJECT-TYPE The sum total of all onu received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.7.5.1.5 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEth3UcastPackets OBJECT-TYPE The sum total of all onu received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.7.5.1.6 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEth3Fragments OBJECT-TYPE The sum total of all onu packets received (fragments) | 1.3.6.1.4.1.6296.101.23.7.7.5.1.7 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEth3Jabbers OBJECT-TYPE The sum total of all onu packets received (jabbers) | 1.3.6.1.4.1.6296.101.23.7.7.5.1.8 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEth3Pkt64Octets OBJECT-TYPE The sum total of all onu received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.5.1.9 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEth3Pkt65To127Octets OBJECT-TYPE The sum total of all onu received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.5.1.10 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEth3Pkt128To255Octets OBJECT-TYPE The sum total of all onu packets (including bad packets) received that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.5.1.11 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEth3Pkt256To511Octets OBJECT-TYPE The sum total of all onu packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.5.1.12 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEth3Pkt512To1023Octets OBJECT-TYPE The sum total of all onu packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.5.1.13 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuUniEth3Pkt1024To1518Octets OBJECT-TYPE The sum total of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.5.1.14 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMTable OBJECT-TYPE sleGponOnuPMStatsDetailGEMTable | 1.3.6.1.4.1.6296.101.23.7.7.6 | not-accessible | current | |
| sleGponOnuPMStatsSumOnuGEMEntry OBJECT-TYPE key: sleGponOnuPMStatsDetailGEMPort, sleGponOltId, sleGponOnuId | 1.3.6.1.4.1.6296.101.23.7.7.6.1 | not-accessible | current | |
| sleGponOnuPMStatsSumOnuGEMPre15mLostPackets OBJECT-TYPE The pre 15 minute number of lost packet | 1.3.6.1.4.1.6296.101.23.7.7.6.1.1 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMPre15mMisInsertedPackets OBJECT-TYPE The pre 15 minute number of mis inserted packet | 1.3.6.1.4.1.6296.101.23.7.7.6.1.2 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMPre15mReceivedPackets OBJECT-TYPE The pre 15 minute number of received packet | 1.3.6.1.4.1.6296.101.23.7.7.6.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMPre15mReceivedBlocks OBJECT-TYPE The pre 15 minute number of received blocks | 1.3.6.1.4.1.6296.101.23.7.7.6.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMPre15mTransmittedBlocks OBJECT-TYPE The pre 15 minute number of transmitted blocks | 1.3.6.1.4.1.6296.101.23.7.7.6.1.5 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMPre15mImpairedBlocks OBJECT-TYPE The pre 15 minute number of impaired blocks | 1.3.6.1.4.1.6296.101.23.7.7.6.1.6 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMHourLostPackets OBJECT-TYPE The hour number of lost packet | 1.3.6.1.4.1.6296.101.23.7.7.6.1.7 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMHourMisInsertedPackets OBJECT-TYPE The hour number of mis inserted packet | 1.3.6.1.4.1.6296.101.23.7.7.6.1.8 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMHourReceivedPackets OBJECT-TYPE The hour number of received packet | 1.3.6.1.4.1.6296.101.23.7.7.6.1.9 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuGEMHourReceivedBlocks OBJECT-TYPE The hour number of received blocks | 1.3.6.1.4.1.6296.101.23.7.7.6.1.10 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuGEMHourTransmittedBlocks OBJECT-TYPE The hour number of transmitted blocks | 1.3.6.1.4.1.6296.101.23.7.7.6.1.11 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMHourImpairedBlocks OBJECT-TYPE The hour number of impaired blocks | 1.3.6.1.4.1.6296.101.23.7.7.6.1.12 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuGEMDayLostPackets OBJECT-TYPE The day number of lost packet | 1.3.6.1.4.1.6296.101.23.7.7.6.1.13 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuGEMDayMisInsertedPackets OBJECT-TYPE The day number of mis inserted packet | 1.3.6.1.4.1.6296.101.23.7.7.6.1.14 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuGEMDayReceivedPackets OBJECT-TYPE The day number of received packet | 1.3.6.1.4.1.6296.101.23.7.7.6.1.15 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuGEMDayReceivedBlocks OBJECT-TYPE The day number of received blocks | 1.3.6.1.4.1.6296.101.23.7.7.6.1.16 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuGEMDayTransmittedBlocks OBJECT-TYPE The day number of transmitted blocks | 1.3.6.1.4.1.6296.101.23.7.7.6.1.17 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuGEMDayImpairedBlocks OBJECT-TYPE The day number of impaired blocks | 1.3.6.1.4.1.6296.101.23.7.7.6.1.18 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuGEMTotalLostPackets OBJECT-TYPE The total number of lost packet | 1.3.6.1.4.1.6296.101.23.7.7.6.1.19 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuGEMTotalMisInsertedPackets OBJECT-TYPE The total number of mis inserted packet | 1.3.6.1.4.1.6296.101.23.7.7.6.1.20 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuGEMTotalReceivedPackets OBJECT-TYPE The total number of received packet | 1.3.6.1.4.1.6296.101.23.7.7.6.1.21 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuGEMTotalReceivedBlocks OBJECT-TYPE The total number of received blocks | 1.3.6.1.4.1.6296.101.23.7.7.6.1.22 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuGEMTotalTransmittedBlocks OBJECT-TYPE The total number of transmitted blocks | 1.3.6.1.4.1.6296.101.23.7.7.6.1.23 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuGEMTotalImpairedBlocks OBJECT-TYPE The total number of impaired blocks | 1.3.6.1.4.1.6296.101.23.7.7.6.1.24 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuAniTable OBJECT-TYPE sleGponOnuPMStatsDetailAniTable | 1.3.6.1.4.1.6296.101.23.7.7.7 | not-accessible | current | |
| sleGponOnuPMStatsSumOnuAniEntry OBJECT-TYPE key: sleGponOnuPMStatsDetailAniPort, sleGponOltId, sleGponOnuId | 1.3.6.1.4.1.6296.101.23.7.7.7.1 | not-accessible | current | |
| sleGponOnuPMStatsSumOnuAniPre15mDiscardedFrames OBJECT-TYPE The pre 15 minute number of lost discarded frames | 1.3.6.1.4.1.6296.101.23.7.7.7.1.1 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuAniHourDiscardedFrames OBJECT-TYPE The hour number of lost discarded frames | 1.3.6.1.4.1.6296.101.23.7.7.7.1.2 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuAniDayDiscardedFrames OBJECT-TYPE The day number of lost discarded frames | 1.3.6.1.4.1.6296.101.23.7.7.7.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuAniTotalDiscardedFrames OBJECT-TYPE The total number of lost discarded frames | 1.3.6.1.4.1.6296.101.23.7.7.7.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpTable OBJECT-TYPE sleGponOnuPMStatsDetailUniEthFrameUpTable | 1.3.6.1.4.1.6296.101.23.7.7.8 | not-accessible | current | |
| sleGponOnuPMStatsSumOnuEthFrameUpEntry OBJECT-TYPE key: sleGponOltId, sleGponOnuId, sleGponOnuPMStatsDetailUniEthFrameUpUniPort | 1.3.6.1.4.1.6296.101.23.7.7.8.1 | not-accessible | current | |
| sleGponOnuPMStatsSumOnuEthFrameUpPre15mDropEvents OBJECT-TYPE The pre 15 minute number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.7.8.1.1 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpPre15mOctets OBJECT-TYPE The pre 15 minute number of octets received | 1.3.6.1.4.1.6296.101.23.7.7.8.1.2 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpPre15mPackets OBJECT-TYPE The pre 15 minute number of packets received, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpPre15mBcastPackets OBJECT-TYPE The pre 15 minute number of received good packets directed to the broadcast address | 1.3.6.1.4.1.6296.101.23.7.7.8.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpPre15mMcastPackets OBJECT-TYPE The pre 15 minute number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.7.8.1.5 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpPre15mUcastPackets OBJECT-TYPE The pre 15 minute number of received good packets directed to the unicast address | 1.3.6.1.4.1.6296.101.23.7.7.8.1.6 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpPre15mCRCErroredPackets OBJECT-TYPE The pre 15 minute number of packets received that had a length | 1.3.6.1.4.1.6296.101.23.7.7.8.1.7 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpPre15mUndersizePackets OBJECT-TYPE The pre 15 minute number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.7.8.1.8 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpPre15mOversizePackets OBJECT-TYPE The pre 15 minute number of packets received that were longer than 1518 octets | 1.3.6.1.4.1.6296.101.23.7.7.8.1.9 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpPre15mPkt64Octets OBJECT-TYPE The pre 15 minute number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.10 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpPre15mPkt65To127Octets OBJECT-TYPE The pre 15 minute number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.11 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpPre15mPkt128To255Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.12 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpPre15mPkt256To511Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.13 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpPre15mPkt512To1023Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.14 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpPre15mPkt1024To1518Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.15 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpHourDropEvents OBJECT-TYPE The hour number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.7.8.1.16 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpHourOctets OBJECT-TYPE The hour number of octets received | 1.3.6.1.4.1.6296.101.23.7.7.8.1.17 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpHourPackets OBJECT-TYPE The hour number of packets received, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.18 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpHourBcastPackets OBJECT-TYPE The hour number of received good packets directed to the broadcast address | 1.3.6.1.4.1.6296.101.23.7.7.8.1.19 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuEthFrameUpHourMcastPackets OBJECT-TYPE The hour number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.7.8.1.20 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpHourUcastPackets OBJECT-TYPE The hour number of received good packets directed to the unicast address | 1.3.6.1.4.1.6296.101.23.7.7.8.1.21 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpHourCRCErroredPackets OBJECT-TYPE The hour number of packets received that had a length | 1.3.6.1.4.1.6296.101.23.7.7.8.1.22 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpHourUndersizePackets OBJECT-TYPE The hour number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.7.8.1.23 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpHourOversizePackets OBJECT-TYPE The hour number of packets received that were longer than 1518 octets | 1.3.6.1.4.1.6296.101.23.7.7.8.1.24 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpHourPkt64Octets OBJECT-TYPE The hour number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.25 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpHourPkt65To127Octets OBJECT-TYPE The hour number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.26 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpHourPkt128To255Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.27 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuEthFrameUpHourPkt256To511Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.28 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpHourPkt512To1023Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.29 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuEthFrameUpHourPkt1024To1518Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.30 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpDayDropEvents OBJECT-TYPE The day number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.7.8.1.31 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpDayOctets OBJECT-TYPE The day number of octets received | 1.3.6.1.4.1.6296.101.23.7.7.8.1.32 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpDayPackets OBJECT-TYPE The day number of packets received, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.33 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpDayBcastPackets OBJECT-TYPE The day number of received good packets directed to the broadcast address | 1.3.6.1.4.1.6296.101.23.7.7.8.1.34 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuEthFrameUpDayMcastPackets OBJECT-TYPE The day number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.7.8.1.35 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpDayUcastPackets OBJECT-TYPE The day number of received good packets directed to the unicast address | 1.3.6.1.4.1.6296.101.23.7.7.8.1.36 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpDayCRCErroredPackets OBJECT-TYPE The day number of packets received that had a length | 1.3.6.1.4.1.6296.101.23.7.7.8.1.37 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpDayUndersizePackets OBJECT-TYPE The day number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.7.8.1.38 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpDayOversizePackets OBJECT-TYPE The day number of packets received that were longer than 1518 octets | 1.3.6.1.4.1.6296.101.23.7.7.8.1.39 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpDayPkt64Octets OBJECT-TYPE The day number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.40 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpDayPkt65To127Octets OBJECT-TYPE The day number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.41 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpDayPkt128To255Octets OBJECT-TYPE The day number of received packets (including bad packets) that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.42 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuEthFrameUpDayPkt256To511Octets OBJECT-TYPE The day number of received packets (including bad packets) that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.43 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpDayPkt512To1023Octets OBJECT-TYPE The day number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.44 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuEthFrameUpDayPkt1024To1518Octets OBJECT-TYPE The day number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.45 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpTotalDropEvents OBJECT-TYPE The total number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.7.8.1.46 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpTotalOctets OBJECT-TYPE The total number of octets received | 1.3.6.1.4.1.6296.101.23.7.7.8.1.47 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpTotalPackets OBJECT-TYPE The total number of packets received, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.48 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpTotalBcastPackets OBJECT-TYPE The total number of received good packets directed to a broadcast address. | 1.3.6.1.4.1.6296.101.23.7.7.8.1.49 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuEthFrameUpTotalMcastPackets OBJECT-TYPE The total number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.7.8.1.50 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpTotalUcastPackets OBJECT-TYPE The total number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.7.8.1.51 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpTotalCRCErroredPackets OBJECT-TYPE The total number of packets received that had a length | 1.3.6.1.4.1.6296.101.23.7.7.8.1.52 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpTotalUndersizePackets OBJECT-TYPE The total number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.7.8.1.53 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpTotalOversizePackets OBJECT-TYPE The total number of packets received that were longer than 1518 octets | 1.3.6.1.4.1.6296.101.23.7.7.8.1.54 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpTotalPkt64Octets OBJECT-TYPE The total number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.55 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpTotalPkt65To127Octets OBJECT-TYPE The total number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.56 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpTotalPkt128To255Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.57 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuEthFrameUpTotalPkt256To511Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.58 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameUpTotalPkt512To1023Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.59 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuEthFrameUpTotalPkt1024To1518Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.8.1.60 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownTable OBJECT-TYPE sleGponOnuPMStatsDetailUniEthFrameDownTable | 1.3.6.1.4.1.6296.101.23.7.7.9 | not-accessible | current | |
| sleGponOnuPMStatsSumOnuEthFrameDownEntry OBJECT-TYPE key: sleGponOltId, sleGponOnuId, sleGponOnuPMStatsDetailUniEthFrameUpUniPort | 1.3.6.1.4.1.6296.101.23.7.7.9.1 | not-accessible | current | |
| sleGponOnuPMStatsSumOnuEthFrameDownPre15mDropEvents OBJECT-TYPE The pre 15 minute number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.7.9.1.1 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownPre15mOctets OBJECT-TYPE The pre 15 minute number of octets received | 1.3.6.1.4.1.6296.101.23.7.7.9.1.2 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownPre15mPackets OBJECT-TYPE The pre 15 minute number of packets received, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownPre15mBcastPackets OBJECT-TYPE The pre 15 minute number of received good packets directed to the broadcast address | 1.3.6.1.4.1.6296.101.23.7.7.9.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownPre15mMcastPackets OBJECT-TYPE The pre 15 minute number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.7.9.1.5 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownPre15mUcastPackets OBJECT-TYPE The pre 15 minute number of received good packets directed to the unicast address | 1.3.6.1.4.1.6296.101.23.7.7.9.1.6 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownPre15mCRCErroredPackets OBJECT-TYPE The pre 15 minute number of packets received that had a length | 1.3.6.1.4.1.6296.101.23.7.7.9.1.7 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownPre15mUndersizePackets OBJECT-TYPE The pre 15 minute number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.7.9.1.8 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownPre15mOversizePackets OBJECT-TYPE The pre 15 minute number of packets received that were longer than 1518 octets | 1.3.6.1.4.1.6296.101.23.7.7.9.1.9 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownPre15mPkt64Octets OBJECT-TYPE The pre 15 minute number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.10 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownPre15mPkt65To127Octets OBJECT-TYPE The pre 15 minute number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.11 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownPre15mPkt128To255Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.12 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownPre15mPkt256To511Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.13 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownPre15mPkt512To1023Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 512..1023 octets long. | 1.3.6.1.4.1.6296.101.23.7.7.9.1.14 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownPre15mPkt1024To1518Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.15 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownHourDropEvents OBJECT-TYPE The hour number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.7.9.1.16 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownHourOctets OBJECT-TYPE The hour number of octets received | 1.3.6.1.4.1.6296.101.23.7.7.9.1.17 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownHourPackets OBJECT-TYPE The hour number of packets received, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.18 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownHourBcastPackets OBJECT-TYPE The hour number of received good packets directed to the broadcast address | 1.3.6.1.4.1.6296.101.23.7.7.9.1.19 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuEthFrameDownHourMcastPackets OBJECT-TYPE The hour number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.7.9.1.20 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownHourUcastPackets OBJECT-TYPE The hour number of received good packets directed to the unicast address | 1.3.6.1.4.1.6296.101.23.7.7.9.1.21 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownHourCRCErroredPackets OBJECT-TYPE The hour number of packets received that had a length | 1.3.6.1.4.1.6296.101.23.7.7.9.1.22 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownHourUndersizePackets OBJECT-TYPE The hour number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.7.9.1.23 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownHourOversizePackets OBJECT-TYPE The hour number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.24 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownHourPkt64Octets OBJECT-TYPE The hour number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.25 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownHourPkt65To127Octets OBJECT-TYPE The hour number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.26 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownHourPkt128To255Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.27 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuEthFrameDownHourPkt256To511Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.28 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownHourPkt512To1023Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.29 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuEthFrameDownHourPkt1024To1518Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.30 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownDayDropEvents OBJECT-TYPE The day number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.7.9.1.31 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownDayOctets OBJECT-TYPE The day number of octets received | 1.3.6.1.4.1.6296.101.23.7.7.9.1.32 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownDayPackets OBJECT-TYPE The day number of packets received, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.33 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownDayBcastPackets OBJECT-TYPE The day number of received good packets directed to a broadcast address. | 1.3.6.1.4.1.6296.101.23.7.7.9.1.34 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuEthFrameDownDayMcastPackets OBJECT-TYPE The day number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.7.9.1.35 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownDayUcastPackets OBJECT-TYPE The day number of received good packets directed to the unicast address | 1.3.6.1.4.1.6296.101.23.7.7.9.1.36 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownDayCRCErroredPackets OBJECT-TYPE The day number of packets received that had a length | 1.3.6.1.4.1.6296.101.23.7.7.9.1.37 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownDayUndersizePackets OBJECT-TYPE The day number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.7.9.1.38 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownDayOversizePackets OBJECT-TYPE The day number of packets received that were longer than 1518 octets | 1.3.6.1.4.1.6296.101.23.7.7.9.1.39 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownDayPkt64Octets OBJECT-TYPE The day number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.40 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownDayPkt65To127Octets OBJECT-TYPE The day number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.41 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownDayPkt128To255Octets OBJECT-TYPE The day number of received packets (including bad packets) that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.42 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuEthFrameDownDayPkt256To511Octets OBJECT-TYPE The day number of packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.43 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownDayPkt512To1023Octets OBJECT-TYPE The day number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.44 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuEthFrameDownDayPkt1024To1518Octets OBJECT-TYPE The day number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.45 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownTotalDropEvents OBJECT-TYPE The total number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.7.9.1.46 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownTotalOctets OBJECT-TYPE The total number of octets received | 1.3.6.1.4.1.6296.101.23.7.7.9.1.47 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownTotalPackets OBJECT-TYPE The total number of packets received, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.48 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownTotalBcastPackets OBJECT-TYPE The total number of received good packets directed to a broadcast address. | 1.3.6.1.4.1.6296.101.23.7.7.9.1.49 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuEthFrameDownTotalMcastPackets OBJECT-TYPE The total number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.7.9.1.50 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownTotalUcastPackets OBJECT-TYPE The total number of received good packets directed to the unicast address | 1.3.6.1.4.1.6296.101.23.7.7.9.1.51 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownTotalCRCErroredPackets OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.7.7.9.1.52 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownTotalUndersizePackets OBJECT-TYPE The total number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.7.9.1.53 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownTotalOversizePackets OBJECT-TYPE The total number of packets received that were longer than 1518 octets | 1.3.6.1.4.1.6296.101.23.7.7.9.1.54 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownTotalPkt64Octets OBJECT-TYPE The total number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.55 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownTotalPkt65To127Octets OBJECT-TYPE The total number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.56 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownTotalPkt128To255Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.57 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuEthFrameDownTotalPkt256To511Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.58 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuEthFrameDownTotalPkt512To1023Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.59 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuEthFrameDownTotalPkt1024To1518Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.9.1.60 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3Table OBJECT-TYPE sleGponOnuPMStatsDetailUniEth3Table | 1.3.6.1.4.1.6296.101.23.7.7.10 | not-accessible | current | |
| sleGponOnuPMStatsSumOnuUniEth3Entry OBJECT-TYPE key: sleGponOltId, sleGponOnuId, sleGponOnuPMStatsDetailUniEthFrameUpUniPort | 1.3.6.1.4.1.6296.101.23.7.7.10.1 | not-accessible | current | |
| sleGponOnuPMStatsSumOnuUniEth3Pre15mDropEvents OBJECT-TYPE The pre 15 minute number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.7.10.1.1 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3Pre15mOctets OBJECT-TYPE The pre 15 minute number of octets received | 1.3.6.1.4.1.6296.101.23.7.7.10.1.2 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3Pre15mPackets OBJECT-TYPE The pre 15 minute number of packets received, including bad packets | 1.3.6.1.4.1.6296.101.23.7.7.10.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3Pre15mBcastPackets OBJECT-TYPE The pre 15 minute number of received good packets directed to the broadcast address. | 1.3.6.1.4.1.6296.101.23.7.7.10.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3Pre15mMcastPackets OBJECT-TYPE The pre 15 minute number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.7.10.1.5 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3Pre15mUcastPackets OBJECT-TYPE The pre 15 minute number of received good packets directed to a unicast address. | 1.3.6.1.4.1.6296.101.23.7.7.10.1.6 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3Pre15mUndersizePackets OBJECT-TYPE The pre 15 minute number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.7.10.1.7 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3Pre15mFragments OBJECT-TYPE The pre 15 minute number of packets received that were fragments | 1.3.6.1.4.1.6296.101.23.7.7.10.1.8 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3Pre15mJabbers OBJECT-TYPE The pre 15 minute number of packets received that were jabbers | 1.3.6.1.4.1.6296.101.23.7.7.10.1.9 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3Pre15mPkt64Octets OBJECT-TYPE The pre 15 minute number of received packets (including bad packets) that were 64 octets long | 1.3.6.1.4.1.6296.101.23.7.7.10.1.10 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3Pre15mPkt65To127Octets OBJECT-TYPE The pre 15 minute number of received packets (including bad packets) that were 65..127 octets long | 1.3.6.1.4.1.6296.101.23.7.7.10.1.11 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3Pre15mPkt128To255Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 128..255 octets long | 1.3.6.1.4.1.6296.101.23.7.7.10.1.12 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3Pre15mPkt256To511Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 256..511 octets long | 1.3.6.1.4.1.6296.101.23.7.7.10.1.13 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3Pre15mPkt512To1023Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 512..1023 octets long | 1.3.6.1.4.1.6296.101.23.7.7.10.1.14 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3Pre15mPkt1024To1518Octets OBJECT-TYPE The pre 15 minute number of packets (including bad packets) received that were 1024..1518 octets long | 1.3.6.1.4.1.6296.101.23.7.7.10.1.15 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3HourDropEvents OBJECT-TYPE The hour number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.7.10.1.16 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3HourOctets OBJECT-TYPE The hour number of octets received | 1.3.6.1.4.1.6296.101.23.7.7.10.1.17 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3HourPackets OBJECT-TYPE The hour number of packets received, | 1.3.6.1.4.1.6296.101.23.7.7.10.1.18 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3HourBcastPackets OBJECT-TYPE The hour number of received good packets directed to the broadcast address | 1.3.6.1.4.1.6296.101.23.7.7.10.1.19 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuUniEth3HourMcastPackets OBJECT-TYPE The hour number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.7.10.1.20 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3HourUcastPackets OBJECT-TYPE The hour number of received good packets directed to the unicast address | 1.3.6.1.4.1.6296.101.23.7.7.10.1.21 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3HourUndersizePackets OBJECT-TYPE The hour number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.7.10.1.22 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3HourFragments OBJECT-TYPE The hour number of packets received that were fragments | 1.3.6.1.4.1.6296.101.23.7.7.10.1.23 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3HourJabbers OBJECT-TYPE The hour number of packets received that were jabbers | 1.3.6.1.4.1.6296.101.23.7.7.10.1.24 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3HourPkt64Octets OBJECT-TYPE The hour number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.10.1.25 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3HourPkt65To127Octets OBJECT-TYPE The hour number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.10.1.26 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3HourPkt128To255Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.10.1.27 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuUniEth3HourPkt256To511Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.10.1.28 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3HourPkt512To1023Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.10.1.29 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuUniEth3HourPkt1024To1518Octets OBJECT-TYPE The hour number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.10.1.30 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3DayDropEvents OBJECT-TYPE The day number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.7.10.1.31 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3DayOctets OBJECT-TYPE The day number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.7.10.1.32 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3DayPackets OBJECT-TYPE The day number of octets received | 1.3.6.1.4.1.6296.101.23.7.7.10.1.33 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3DayBcastPackets OBJECT-TYPE The day number of received good packets directed to the broadcast address | 1.3.6.1.4.1.6296.101.23.7.7.10.1.34 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuUniEth3DayMcastPackets OBJECT-TYPE The day number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.7.10.1.35 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3DayUcastPackets OBJECT-TYPE The day number of received good packets directed to the unicast address | 1.3.6.1.4.1.6296.101.23.7.7.10.1.36 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3DayUndersizePackets OBJECT-TYPE The day number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.7.10.1.37 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3DayFragments OBJECT-TYPE The day number of packets received that were fragments | 1.3.6.1.4.1.6296.101.23.7.7.10.1.38 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3DayJabbers OBJECT-TYPE The day number of packets received that were jabbers | 1.3.6.1.4.1.6296.101.23.7.7.10.1.39 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3DayPkt64Octets OBJECT-TYPE The day number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.10.1.40 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3DayPkt65To127Octets OBJECT-TYPE The day number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.10.1.41 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3DayPkt128To255Octets OBJECT-TYPE The day number of received packets (including bad packets) that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.10.1.42 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuUniEth3DayPkt256To511Octets OBJECT-TYPE The day number of received packets (including bad packets) that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.10.1.43 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3DayPkt512To1023Octets OBJECT-TYPE The day number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.10.1.44 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuUniEth3DayPkt1024To1518Octets OBJECT-TYPE The day number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.10.1.45 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3TotalDropEvents OBJECT-TYPE The total number of events in which packets were dropped due to lack of resources. | 1.3.6.1.4.1.6296.101.23.7.7.10.1.46 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3TotalOctets OBJECT-TYPE The total number of octets received | 1.3.6.1.4.1.6296.101.23.7.7.10.1.47 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3TotalPackets OBJECT-TYPE The total number of packets received, | 1.3.6.1.4.1.6296.101.23.7.7.10.1.48 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3TotalBcastPackets OBJECT-TYPE The total number of received good packets directed to the broadcast address | 1.3.6.1.4.1.6296.101.23.7.7.10.1.49 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuUniEth3TotalMcastPackets OBJECT-TYPE The total number of received good packets directed to a multicast address. | 1.3.6.1.4.1.6296.101.23.7.7.10.1.50 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3TotalUcastPackets OBJECT-TYPE The total number of received good packets directed to the unicast address | 1.3.6.1.4.1.6296.101.23.7.7.10.1.51 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3TotalUndersizePackets OBJECT-TYPE The total number of packets received that were less than 64 octets long | 1.3.6.1.4.1.6296.101.23.7.7.10.1.52 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3TotalFragments OBJECT-TYPE The total number of packets received (fragments) | 1.3.6.1.4.1.6296.101.23.7.7.10.1.53 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3TotalJabbers OBJECT-TYPE The total number of packets received (jabbers) | 1.3.6.1.4.1.6296.101.23.7.7.10.1.54 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3TotalPkt64Octets OBJECT-TYPE The total number of received packets (including bad packets) that were 64 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.10.1.55 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3TotalPkt65To127Octets OBJECT-TYPE The total number of received packets (including bad packets) that were 65..127 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.10.1.56 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3TotalPkt128To255Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 128..255 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.10.1.57 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuUniEth3TotalPkt256To511Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 256..511 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.10.1.58 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuUniEth3TotalPkt512To1023Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 512..1023 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.10.1.59 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuUniEth3TotalPkt1024To1518Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 1024..1518 octets long, | 1.3.6.1.4.1.6296.101.23.7.7.10.1.60 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuGemNctpTable OBJECT-TYPE | 1.3.6.1.4.1.6296.101.23.7.7.11 | not-accessible | current | |
| sleGponOnuPMStatsSumAllOnuGemNctpEntry OBJECT-TYPE | 1.3.6.1.4.1.6296.101.23.7.7.11.1 | not-accessible | current | |
| sleGponOnuPMStatsSumAllOnuGemNctpRxGemFrames OBJECT-TYPE The sum total of all onu Rx Gem Frames | 1.3.6.1.4.1.6296.101.23.7.7.11.1.1 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuGemNctpTxGemFrames OBJECT-TYPE The sum total of all onu Tx Gem Frames | 1.3.6.1.4.1.6296.101.23.7.7.11.1.2 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuGemNctpRxPayloadByte OBJECT-TYPE The sum total of all onu Rx Payload Byte | 1.3.6.1.4.1.6296.101.23.7.7.11.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuGemNctpTxPayloadByte OBJECT-TYPE The sum total of all onu Tx Payload Byte | 1.3.6.1.4.1.6296.101.23.7.7.11.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumAllOnuGemNctpEncryptionKeyError OBJECT-TYPE The sum total of all onu Encryption Key Error | 1.3.6.1.4.1.6296.101.23.7.7.11.1.5 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMNCTPTable OBJECT-TYPE | 1.3.6.1.4.1.6296.101.23.7.7.12 | not-accessible | current | |
| sleGponOnuPMStatsSumOnuGEMNCTPEntry OBJECT-TYPE | 1.3.6.1.4.1.6296.101.23.7.7.12.1 | not-accessible | current | |
| sleGponOnuPMStatsSumOnuGEMNCTPPre15mRxGemFrames OBJECT-TYPE The pre 15 minute number of Rx Gem Frames | 1.3.6.1.4.1.6296.101.23.7.7.12.1.1 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMNCTPPre15mTxGemFrames OBJECT-TYPE The pre 15 minute number of Tx Gem Frames | 1.3.6.1.4.1.6296.101.23.7.7.12.1.2 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMNCTPPre15mRxPayloadByte OBJECT-TYPE The pre 15 minute number of Rx Payload Byte | 1.3.6.1.4.1.6296.101.23.7.7.12.1.3 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMNCTPPre15mTxPayloadByte OBJECT-TYPE The pre 15 minute number of Tx Payload Byte | 1.3.6.1.4.1.6296.101.23.7.7.12.1.4 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMNCTPPre15mEncryptionKeyError OBJECT-TYPE The pre 15 minute number of Encryption Key Error | 1.3.6.1.4.1.6296.101.23.7.7.12.1.5 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMNCTPHourRxGemFrames OBJECT-TYPE The hour number of Rx Gem Frames | 1.3.6.1.4.1.6296.101.23.7.7.12.1.6 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMNCTPHourTxGemFrames OBJECT-TYPE The hour number of Tx Gem Frames | 1.3.6.1.4.1.6296.101.23.7.7.12.1.7 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMNCTPHourRxPayloadByte OBJECT-TYPE The hour number of Rx Payload Byte | 1.3.6.1.4.1.6296.101.23.7.7.12.1.8 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMNCTPHourTxPayloadByte OBJECT-TYPE The hour number of Tx Payload Byte | 1.3.6.1.4.1.6296.101.23.7.7.12.1.9 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMNCTPHourEncryptionKeyError OBJECT-TYPE The hour number of Encryption Key Error | 1.3.6.1.4.1.6296.101.23.7.7.12.1.10 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMNCTPDayRxGemFrames OBJECT-TYPE The day number of Rx Gem Frames | 1.3.6.1.4.1.6296.101.23.7.7.12.1.11 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMNCTPDayTxGemFrames OBJECT-TYPE The day number of Tx Gem Frames | 1.3.6.1.4.1.6296.101.23.7.7.12.1.12 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMNCTPDayRxPayloadByte OBJECT-TYPE The day number of Rx Payload Byte | 1.3.6.1.4.1.6296.101.23.7.7.12.1.13 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMNCTPDayTxPayloadByte OBJECT-TYPE The day number of Tx Payload Byte | 1.3.6.1.4.1.6296.101.23.7.7.12.1.14 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMNCTPDayEncryptionKeyError OBJECT-TYPE The day number of Encryption Key Error | 1.3.6.1.4.1.6296.101.23.7.7.12.1.15 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMNCTPTotalRxGemFrames OBJECT-TYPE The total number of Rx Gem Frames | 1.3.6.1.4.1.6296.101.23.7.7.12.1.16 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMNCTPTotalTxGemFrames OBJECT-TYPE The total number of Tx Gem Frames | 1.3.6.1.4.1.6296.101.23.7.7.12.1.17 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMNCTPTotalRxPayloadByte OBJECT-TYPE The total number of Rx Payload Byte | 1.3.6.1.4.1.6296.101.23.7.7.12.1.18 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMNCTPTotalTxPayloadByte OBJECT-TYPE The total number of Tx Payload Byte | 1.3.6.1.4.1.6296.101.23.7.7.12.1.19 | Counter64 | read-write | current |
| sleGponOnuPMStatsSumOnuGEMNCTPTotalEncryptionKeyError OBJECT-TYPE The total number of Encryption Key Error | 1.3.6.1.4.1.6296.101.23.7.7.12.1.20 | Counter64 | read-only | current |
| sleGponOnuPMStatsSumOnuGEMNCTPElapsedTimeAfterClear OBJECT-TYPE The number of packets for elapsed time after clear | 1.3.6.1.4.1.6296.101.23.7.7.12.1.21 | TimeTicks | read-only | current |
| sleGponOnuPMStatsSumOnuGEMNCTPElapsedTimeAfterUpdate OBJECT-TYPE The number of packets for elapsed time after update | 1.3.6.1.4.1.6296.101.23.7.7.12.1.22 | Counter64 | read-only | current |
| sleGponFirmwareMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.8 | |||
| sleGponFirmwareTable OBJECT-TYPE sleGponFirmwareTable | 1.3.6.1.4.1.6296.101.23.8.1 | not-accessible | current | |
| sleGponFirmwareEntry OBJECT-TYPE key: sleGponFirmwareType, sleGponFirmwareName | 1.3.6.1.4.1.6296.101.23.8.1.1 | not-accessible | current | |
| sleGponFirmwareType OBJECT-TYPE Firmware type. | 1.3.6.1.4.1.6296.101.23.8.1.1.1 | INTEGER {olt(1), onu(2)} | read-only | current |
| sleGponFirmwareName OBJECT-TYPE Firmware name. | 1.3.6.1.4.1.6296.101.23.8.1.1.2 | OCTET STRING (SIZE(1..64)) | read-only | current |
| sleGponFirmwareControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.8.2 | |||
| sleGponFirmwareControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.8.2.1 | INTEGER {setGponFirmwareUpgradeProfile(1), deleteGponFirmware(2), setGponFirmwareDownload(3)} | read-write | current |
| sleGponFirmwareControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.8.2.2 | SleControlStatusType | read-only | current |
| sleGponFirmwareControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.8.2.3 | Gauge32 | read-write | current |
| sleGponFirmwareControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.8.2.4 | TimeTicks | read-only | current |
| sleGponFirmwareControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.8.2.5 | SleControlRequestResultType | read-only | current |
| sleGponFirmwareControlName OBJECT-TYPE Firmware filename. | 1.3.6.1.4.1.6296.101.23.8.2.6 | OCTET STRING (SIZE(1..128)) | read-write | current |
| sleGponFirmwareControlUpgradeMethod OBJECT-TYPE 1: using FTP 2: using TFTP | 1.3.6.1.4.1.6296.101.23.8.2.7 | INTEGER {ftp(1), tftp(2)} | read-write | current |
| sleGponFirmwareControlUpgradeMode OBJECT-TYPE 1. Uploading firmware to the remote-host 2. Downloading firmware from the remote-host. | 1.3.6.1.4.1.6296.101.23.8.2.8 | INTEGER {upload(1), download(2)} | read-write | current |
| sleGponFirmwareControlServerAddress OBJECT-TYPE The remote-host's IP address | 1.3.6.1.4.1.6296.101.23.8.2.9 | IpAddress | read-write | current |
| sleGponFirmwareControlUser OBJECT-TYPE Account-name | 1.3.6.1.4.1.6296.101.23.8.2.10 | OCTET STRING | read-write | current |
| sleGponFirmwareControlPasswd OBJECT-TYPE Account-password | 1.3.6.1.4.1.6296.101.23.8.2.11 | OCTET STRING | read-write | current |
| sleGponFirmwareNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.8.3 | |||
| sleGponOnuFirmwareAutoUpgradeMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.9 | |||
| sleGponOnuFWAutoUpgrade OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.9.1 | |||
| sleGponOnuFWAutoUpgradeTable OBJECT-TYPE sleGponOnuFWAutoUpgradeTable | 1.3.6.1.4.1.6296.101.23.9.1.1 | not-accessible | current | |
| sleGponOnuFWAutoUpgradeEntry OBJECT-TYPE key: sleGponOltId | 1.3.6.1.4.1.6296.101.23.9.1.1.1 | not-accessible | current | |
| sleGponOnuFWAutoUpgradeMode OBJECT-TYPE Auto upgrade configuration. | 1.3.6.1.4.1.6296.101.23.9.1.1.1.1 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleGponOnuFWAutoUpgradeVersionMatch OBJECT-TYPE Upgrade if ONU's version is upper than auto-upgrade-fw. | 1.3.6.1.4.1.6296.101.23.9.1.1.1.2 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleGponOnuFWAutoUpgradeInvalidVersionMatch OBJECT-TYPE Upgrade if ONU's version is invalid. | 1.3.6.1.4.1.6296.101.23.9.1.1.1.3 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleGponOnuFWAutoUpgradeStatus OBJECT-TYPE Auto upgrade status. | 1.3.6.1.4.1.6296.101.23.9.1.1.1.4 | INTEGER {none(0), downloadFirmware(1), uploadFirmwareToGPIU(2), upgradeOnuProgress(3), upgradeOnuWating(4), unknown(5)} | read-only | current |
| sleGponOnuFWAutoUpgradeCurrentUgradingFWName OBJECT-TYPE Firmware of current upgrading. | 1.3.6.1.4.1.6296.101.23.9.1.1.1.5 | OCTET STRING (SIZE(1..128)) | read-only | current |
| sleGponOnuFWAutoUpgradeControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.9.1.2 | |||
| sleGponOnuFWAutoUpgradeControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.9.1.2.1 | INTEGER {setAutoUpgradeMode(1), setVersionMatch(2), setInvalidVersionMatch(3)} | read-write | current |
| sleGponOnuFWAutoUpgradeControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.9.1.2.2 | SleControlStatusType | read-only | current |
| sleGponOnuFWAutoUpgradeControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.9.1.2.3 | Gauge32 | read-write | current |
| sleGponOnuFWAutoUpgradeControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.9.1.2.4 | TimeTicks | read-only | current |
| sleGponOnuFWAutoUpgradeControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.9.1.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOnuFWAutoUpgradeControlOltId OBJECT-TYPE Gpon Olt Index. | 1.3.6.1.4.1.6296.101.23.9.1.2.6 | INTEGER (1..2147483647) | read-write | current |
| sleGponOnuFWAutoUpgradeControlMode OBJECT-TYPE Auto upgrade configuration. | 1.3.6.1.4.1.6296.101.23.9.1.2.7 | INTEGER {enable(1), disable(2)} | read-write | current |
| sleGponOnuFWAutoUpgradeControlVersionMatch OBJECT-TYPE Upgrade if ONU's version is upper than auto-upgrade-fw. | 1.3.6.1.4.1.6296.101.23.9.1.2.8 | INTEGER {enable(1), disable(2)} | read-write | current |
| sleGponOnuFWAutoUpgradeControlInvalidVersionMatch OBJECT-TYPE Upgrade if ONU's version is invalid. | 1.3.6.1.4.1.6296.101.23.9.1.2.9 | INTEGER {enable(1), disable(2)} | read-write | current |
| sleGponOnuFWAutoUpgradeNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.9.1.3 | |||
| sleGponOnuFWAutoUpgradeTime OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.9.2 | |||
| sleGponOnuFWAutoUpgradeTimeInfo OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.9.2.1 | |||
| sleGponOnuFWAutoUpgradeStartTime OBJECT-TYPE ONU upgrade start time. (-1 is none-time : disable) | 1.3.6.1.4.1.6296.101.23.9.2.1.1 | INTEGER (-1 | 0..23) | read-only | current |
| sleGponOnuFWAutoUpgradeEndTime OBJECT-TYPE ONU upgrade end time. (-1 is none-time : disable) | 1.3.6.1.4.1.6296.101.23.9.2.1.2 | INTEGER (-1 | 0..23) | read-only | current |
| sleGponOnuFWAutoUpgradeRebootTime OBJECT-TYPE ONU rebooting time. (-1 is none-time : disable / 24 is immediately) | 1.3.6.1.4.1.6296.101.23.9.2.1.3 | INTEGER (-1 | 0..23 | 24) | read-only | current |
| sleGponOnuFWAutoUpgradeTimeControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.9.2.2 | |||
| sleGponOnuFWAutoUpgradeTimeControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.9.2.2.1 | INTEGER {setOnuFWAutoUpgradeStartEndTime(1), setOnuFWAutoUpgradeRebootTime(2)} | read-write | current |
| sleGponOnuFWAutoUpgradeTimeControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.9.2.2.2 | SleControlStatusType | read-only | current |
| sleGponOnuFWAutoUpgradeTimeControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.9.2.2.3 | Gauge32 | read-write | current |
| sleGponOnuFWAutoUpgradeTimeControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.9.2.2.4 | TimeTicks | read-only | current |
| sleGponOnuFWAutoUpgradeTimeControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.9.2.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOnuFWAutoUpgradeTimeControlStartTime OBJECT-TYPE ONU upgrade start time. (-1 is none-time : disable) | 1.3.6.1.4.1.6296.101.23.9.2.2.6 | INTEGER (-1 | 0..23) | read-write | current |
| sleGponOnuFWAutoUpgradeTimeControlEndTime OBJECT-TYPE ONU upgrade end time. (-1 is none-time : disable) | 1.3.6.1.4.1.6296.101.23.9.2.2.7 | INTEGER (-1 | 0..23) | read-write | current |
| sleGponOnuFWAutoUpgradeTimeControlRebootTime OBJECT-TYPE ONU rebooting time. (-1 is none-time : disable / 24 is immediately) | 1.3.6.1.4.1.6296.101.23.9.2.2.8 | INTEGER (-1 | 0..23 | 24) | read-write | current |
| sleGponOnuFWAutoUpgradeTimeNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.9.2.3 | |||
| sleGponOnuFWAutoUpgradeModel OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.9.3 | |||
| sleGponOnuFWAutoUpgradeModelTable OBJECT-TYPE sleGponOnuFWAutoUpgradeModelTable | 1.3.6.1.4.1.6296.101.23.9.3.1 | not-accessible | current | |
| sleGponOnuFWAutoUpgradeModelEntry OBJECT-TYPE key: sleGponOnuFWAutoUpgradeModelId | 1.3.6.1.4.1.6296.101.23.9.3.1.1 | not-accessible | current | |
| sleGponOnuFWAutoUpgradeModelId OBJECT-TYPE Onu modle index. | 1.3.6.1.4.1.6296.101.23.9.3.1.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponOnuFWAutoUpgradeModelName OBJECT-TYPE Onu model name. | 1.3.6.1.4.1.6296.101.23.9.3.1.1.2 | OCTET STRING (SIZE(1..128)) | read-only | current |
| sleGponOnuFWAutoUpgradeModelFWName OBJECT-TYPE Firmware name of onu model. | 1.3.6.1.4.1.6296.101.23.9.3.1.1.3 | OCTET STRING (SIZE(1..128)) | read-only | current |
| sleGponOnuFWAutoUpgradeModelFWVersion OBJECT-TYPE Firmware version of onu model. | 1.3.6.1.4.1.6296.101.23.9.3.1.1.4 | OCTET STRING (SIZE(1..20)) | read-only | current |
| sleGponOnuFWAutoUpgradeModelStatus OBJECT-TYPE Firmware status of onu model. | 1.3.6.1.4.1.6296.101.23.9.3.1.1.5 | INTEGER {none(0), downloading(1), uploadingToGPIU(2), noFirmware(3), downloadComplete(4)} | read-only | current |
| sleGponOnuFWAutoUpgradeModelMethod OBJECT-TYPE 0: using image in local 1: using FTP 2: using TFTP | 1.3.6.1.4.1.6296.101.23.9.3.1.1.6 | INTEGER {local(0), ftp(1), tftp(2)} | read-only | current |
| sleGponOnuFWAutoUpgradeModelServerAddress OBJECT-TYPE FTP/TFTP server IP address. | 1.3.6.1.4.1.6296.101.23.9.3.1.1.7 | IpAddress | read-only | current |
| sleGponOnuFWAutoUpgradeModelUser OBJECT-TYPE Account-name | 1.3.6.1.4.1.6296.101.23.9.3.1.1.8 | OCTET STRING (SIZE(1..20)) | read-only | current |
| sleGponOnuFWAutoUpgradeModelPasswd OBJECT-TYPE Account-password | 1.3.6.1.4.1.6296.101.23.9.3.1.1.9 | OCTET STRING (SIZE(1..20)) | read-only | current |
| sleGponOnuFWAutoUpgradeModelFWTargetVersion OBJECT-TYPE Upgrade target onu's version. | 1.3.6.1.4.1.6296.101.23.9.3.1.1.10 | OCTET STRING (SIZE(1..20)) | read-only | current |
| sleGponOnuFWAutoUpgradeModelExclude OBJECT-TYPE The upgrade model excluding status | 1.3.6.1.4.1.6296.101.23.9.3.1.1.11 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleGponOnuFWAutoUpgradeModelControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.9.3.2 | |||
| sleGponOnuFWAutoUpgradeModelControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.9.3.2.1 | INTEGER {setOnuFWAutoUpgradeModelProfile(1), destroyOnuAutoUpgradeFirmware(2), modifyOnuAutoUpgradeTargetVer(3), delGponOnuFWAutoUpgradeModelTargetVer(4)} | read-write | current |
| sleGponOnuFWAutoUpgradeModelControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.9.3.2.2 | SleControlStatusType | read-only | current |
| sleGponOnuFWAutoUpgradeModelControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.9.3.2.3 | Gauge32 | read-write | current |
| sleGponOnuFWAutoUpgradeModelControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.9.3.2.4 | TimeTicks | read-only | current |
| sleGponOnuFWAutoUpgradeModelControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.9.3.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOnuFWAutoUpgradeModelControlName OBJECT-TYPE Onu model name. | 1.3.6.1.4.1.6296.101.23.9.3.2.6 | OCTET STRING (SIZE(1..128)) | read-write | current |
| sleGponOnuFWAutoUpgradeModelControlFWName OBJECT-TYPE Firmware name of onu model. | 1.3.6.1.4.1.6296.101.23.9.3.2.7 | OCTET STRING (SIZE(1..128)) | read-write | current |
| sleGponOnuFWAutoUpgradeModelControlMethod OBJECT-TYPE 0: using image in local 1: using FTP 2: using TFTP | 1.3.6.1.4.1.6296.101.23.9.3.2.8 | INTEGER {local(0), ftp(1), tftp(2)} | read-write | current |
| sleGponOnuFWAutoUpgradeModelControlServerAddress OBJECT-TYPE FTP/TFTP server IP address. | 1.3.6.1.4.1.6296.101.23.9.3.2.9 | IpAddress | read-write | current |
| sleGponOnuFWAutoUpgradeModelControlUser OBJECT-TYPE Account-name | 1.3.6.1.4.1.6296.101.23.9.3.2.10 | OCTET STRING (SIZE(1..20)) | read-write | current |
| sleGponOnuFWAutoUpgradeModelControlPasswd OBJECT-TYPE Account-password | 1.3.6.1.4.1.6296.101.23.9.3.2.11 | OCTET STRING (SIZE(1..20)) | read-write | current |
| sleGponOnuFWAutoUpgradeModelControlFWTargetVersion OBJECT-TYPE Upgrade target onu's version. | 1.3.6.1.4.1.6296.101.23.9.3.2.12 | OCTET STRING (SIZE(1..20)) | read-write | current |
| sleGponOnuFWAutoUpgradeModelControlExclude OBJECT-TYPE The upgrade model excluding status | 1.3.6.1.4.1.6296.101.23.9.3.2.13 | INTEGER {enable(1), disable(2)} | read-write | current |
| sleGponOnuFWAutoUpgradeModelNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.9.3.3 | |||
| sleGponOnuFWAutoUpgradeMTime OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.9.4 | |||
| sleGponOnuFWAutoUpgradeMTimeTable OBJECT-TYPE sleGponOnuFWAutoUpgradeMTimeTable | 1.3.6.1.4.1.6296.101.23.9.4.1 | not-accessible | current | |
| sleGponOnuFWAutoUpgradeMTimeEntry OBJECT-TYPE key: sleGponOnuFWAutoUpgradeMTimeIndex | 1.3.6.1.4.1.6296.101.23.9.4.1.1 | not-accessible | current | |
| sleGponOnuFWAutoUpgradeMTimeIndex OBJECT-TYPE index | 1.3.6.1.4.1.6296.101.23.9.4.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponOnuFWAutoUpgradeMTimeStartTime OBJECT-TYPE upgrade start time for model. (-1 is none-time : disable) | 1.3.6.1.4.1.6296.101.23.9.4.1.1.2 | INTEGER (-1 | 0..23) | read-only | current |
| sleGponOnuFWAutoUpgradeMTimeEndTime OBJECT-TYPE upgrade end time for model. (-1 is none-time : disable) | 1.3.6.1.4.1.6296.101.23.9.4.1.1.3 | INTEGER (-1 | 0..23) | read-only | current |
| sleGponOnuFWAutoUpgradeMTimeModelName OBJECT-TYPE Onu model name. | 1.3.6.1.4.1.6296.101.23.9.4.1.1.4 | OCTET STRING (SIZE(1..128)) | read-only | current |
| sleGponOnuFWAutoUpgradeMTimeRebootTime OBJECT-TYPE The reboot time (hour) -1: unused 0~23: available values 24: immediately | 1.3.6.1.4.1.6296.101.23.9.4.1.1.5 | Integer32 (-1 | 0..24) | read-only | current |
| sleGponOnuFWAutoUpgradeMTimeControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.9.4.2 | |||
| sleGponOnuFWAutoUpgradeMTimeControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.9.4.2.1 | INTEGER {setOnuFWAutoUpgradeMTime(1), destroyOnuAutoUpgradeMTime(2), setRebootTime(3)} | read-write | current |
| sleGponOnuFWAutoUpgradeMTimeControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.9.4.2.2 | SleControlStatusType | read-only | current |
| sleGponOnuFWAutoUpgradeMTimeControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.9.4.2.3 | Gauge32 | read-write | current |
| sleGponOnuFWAutoUpgradeMTimeControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.9.4.2.4 | TimeTicks | read-only | current |
| sleGponOnuFWAutoUpgradeMTimeControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.9.4.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOnuFWAutoUpgradeMTimeControlStartTime OBJECT-TYPE Upgrade start time for model (-1 is none-time : disable) | 1.3.6.1.4.1.6296.101.23.9.4.2.6 | INTEGER (-1 | 0..23) | read-write | current |
| sleGponOnuFWAutoUpgradeMTimeControlEndTime OBJECT-TYPE upgrade end time for model. (-1 is none-time : disable) | 1.3.6.1.4.1.6296.101.23.9.4.2.7 | INTEGER (-1 | 0..23) | read-write | current |
| sleGponOnuFWAutoUpgradeMTimeControlModelName OBJECT-TYPE Onu model name. | 1.3.6.1.4.1.6296.101.23.9.4.2.8 | OCTET STRING (SIZE(1..128)) | read-write | current |
| sleGponOnuFWAutoUpgradeMTimeControlRebootTime OBJECT-TYPE The reboot time (hour) -1: unused 0~23: available values 24: immediately | 1.3.6.1.4.1.6296.101.23.9.4.2.9 | Integer32 (-1 | 0..24) | read-write | current |
| sleGponOnuFWAutoUpgradeMTimeNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.9.4.3 | |||
| sleGponOnuFWAutoUpgradeState OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.9.5 | |||
| sleGponOnuFWAutoUpgradeStateTable OBJECT-TYPE sleGponOnuFWAutoUpgradeStateTable | 1.3.6.1.4.1.6296.101.23.9.5.1 | not-accessible | current | |
| sleGponOnuFWAutoUpgradeStateEntry OBJECT-TYPE key: sleGponOnuFWAutoUpgradeSIndex | 1.3.6.1.4.1.6296.101.23.9.5.1.1 | not-accessible | current | |
| sleGponOnuFWAutoUpgradeSIndex OBJECT-TYPE Index. | 1.3.6.1.4.1.6296.101.23.9.5.1.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponOnuFWAutoUpgradeSOltID OBJECT-TYPE OLT ID. | 1.3.6.1.4.1.6296.101.23.9.5.1.1.2 | INTEGER (1..65535) | read-only | current |
| sleGponOnuFWAutoUpgradeSOnuID OBJECT-TYPE ONU ID. | 1.3.6.1.4.1.6296.101.23.9.5.1.1.3 | INTEGER (1..65535) | read-only | current |
| sleGponOnuFWAutoUpgradeSModelName OBJECT-TYPE Onu model name. | 1.3.6.1.4.1.6296.101.23.9.5.1.1.4 | OCTET STRING (SIZE(1..128)) | read-only | current |
| sleGponOnuFWAutoUpgradeSStatus OBJECT-TYPE Onu auto upgrade status. | 1.3.6.1.4.1.6296.101.23.9.5.1.1.5 | INTEGER {none(0), downloadProgress(1), downloadProgressforDevBusy(2), endDownloadForDevBusy(3), downloadComplete(4), downloadFail(5), commitWaitValid(6), commitProgress(7), commitProgressforDevBusy(8), commitFailForDevBusy(9), commitComplete(10), commitFail(11), changeActiveComplete(12), changeActiveFailforDevBusy(13), changeActiveFail(14), autoUpgradeResetWaiting(15), autoUpgradeFail(16), endDownloadSend(17), endDownloadComplete(18), bootloaderDownloadProgress(19), bootloaderDownloadDevBusy(20), bootloaderEndDownloadDevBusy(21), bootloaderDownloadComplete(22), bootloaderDownloadFail(23), bootloaderEndDownloadRequest(24), bootloaderEndDownloadComplete(25), autoUpgradeComplete(26), downloadWait(27), unknown(255)} | read-only | current |
| sleGponOnuFWAutoUpgradeSFailCnt OBJECT-TYPE Auto upgrade fail count | 1.3.6.1.4.1.6296.101.23.9.5.1.1.6 | INTEGER (1..65535) | read-only | current |
| sleGponOnuFWAutoUpgradeSActiveVer OBJECT-TYPE Active version of onu. | 1.3.6.1.4.1.6296.101.23.9.5.1.1.7 | OCTET STRING (SIZE(1..20)) | read-only | current |
| sleGponOnuFWAutoUpgradeBase OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.9.6 | |||
| sleGponOnuFWAutoUpgradeBaseInfo OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.9.6.1 | |||
| sleGponOnuFWAutoUpgradeBaseRetryCounts OBJECT-TYPE The retry count. | 1.3.6.1.4.1.6296.101.23.9.6.1.1 | Integer32 | read-only | current |
| sleGponOnuFWAutoUpgradeBaseControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.9.6.2 | |||
| sleGponOnuFWAutoUpgradeControlBaseRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.9.6.2.1 | INTEGER {setRetryCount(1)} | read-write | current |
| sleGponOnuFWAutoUpgradeControlBaseStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.9.6.2.2 | SleControlStatusType | read-write | current |
| sleGponOnuFWAutoUpgradeControlBaseTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.9.6.2.3 | Gauge32 | read-only | current |
| sleGponOnuFWAutoUpgradeControlBaseTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.9.6.2.4 | TimeTicks | read-write | current |
| sleGponOnuFWAutoUpgradeControlBaseReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.9.6.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOnuFWAutoUpgradeControlBaseCount OBJECT-TYPE The retry count. | 1.3.6.1.4.1.6296.101.23.9.6.2.6 | INTEGER (3..10) | read-write | current |
| sleGponOnuFWAutoUpgradeBaseNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.9.6.3 | |||
| sleGponOntFirmware OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.10 | |||
| sleGponOntFirmwareTable OBJECT-TYPE sleGponOntFirmwareTable | 1.3.6.1.4.1.6296.101.23.10.1 | not-accessible | current | |
| sleGponOntFirmwareEntry OBJECT-TYPE key: sleGponOntFirmwareIndex | 1.3.6.1.4.1.6296.101.23.10.1.1 | not-accessible | current | |
| sleGponOntFirmwareIndex OBJECT-TYPE Ont Firmware Index. | 1.3.6.1.4.1.6296.101.23.10.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponOntFirmwareType OBJECT-TYPE Ont Firmware type. | 1.3.6.1.4.1.6296.101.23.10.1.1.2 | INTEGER {os(1), bootloader(2), unknown(255)} | read-only | current |
| sleGponOntFirmwareName OBJECT-TYPE Ont Firmware name. | 1.3.6.1.4.1.6296.101.23.10.1.1.3 | OCTET STRING | read-only | current |
| sleGponOntiFirmwareSize OBJECT-TYPE Ont Firmware size. | 1.3.6.1.4.1.6296.101.23.10.1.1.4 | Integer32 | read-only | current |
| sleGponOntFirmwareMd5 OBJECT-TYPE Ont Firmware md5 sum. | 1.3.6.1.4.1.6296.101.23.10.1.1.5 | OCTET STRING | read-only | current |
| sleGponOntFirmwareOntTable OBJECT-TYPE sleGponOntFirmwareOntTable | 1.3.6.1.4.1.6296.101.23.10.2 | not-accessible | current | |
| sleGponOntFirmwareOntEntry OBJECT-TYPE key: sleGponOntFirmwareOltId, sleGponOntFirmwareOntId | 1.3.6.1.4.1.6296.101.23.10.2.1 | not-accessible | current | |
| sleGponOntFirmwareOltId OBJECT-TYPE Ont-Firmware OLT Index. | 1.3.6.1.4.1.6296.101.23.10.2.1.1 | Integer32 (1..2147483647) | read-only | current |
| sleGponOntFirmwareOntId OBJECT-TYPE Ont-Firmware ONT Index. | 1.3.6.1.4.1.6296.101.23.10.2.1.2 | Integer32 (1..65535) | read-only | current |
| sleGponOntFirmwareOntOs1Ver OBJECT-TYPE Ont-Firmware OS1 version. | 1.3.6.1.4.1.6296.101.23.10.2.1.3 | OCTET STRING | read-only | current |
| sleGponOntFirmwareOntOs2Ver OBJECT-TYPE Ont-Firmware OS2 version. | 1.3.6.1.4.1.6296.101.23.10.2.1.4 | OCTET STRING | read-only | current |
| sleGponOntFirmwareOntBLVer OBJECT-TYPE Ont-Firmware ONT bootloader name. | 1.3.6.1.4.1.6296.101.23.10.2.1.5 | OCTET STRING | read-only | current |
| sleGponOntFirmeareOntDefaultOS OBJECT-TYPE Ont-Firmware ONT default-os. | 1.3.6.1.4.1.6296.101.23.10.2.1.6 | INTEGER {os1(1), os2(2)} | read-only | current |
| sleGponOntFirmeareOntRunningOS OBJECT-TYPE Ont-Firmware ONT running-os. | 1.3.6.1.4.1.6296.101.23.10.2.1.7 | INTEGER {os1(1), os2(2)} | read-only | current |
| sleGponOntFirmwareOntGponOs1Ver OBJECT-TYPE Ont-Firmware GPON OS1 version. | 1.3.6.1.4.1.6296.101.23.10.2.1.8 | OCTET STRING | read-only | current |
| sleGponOntFirmwareOntGponOs2Ver OBJECT-TYPE Ont-Firmware GPON OS2 version. | 1.3.6.1.4.1.6296.101.23.10.2.1.9 | OCTET STRING | read-only | current |
| sleGponOntFirmwareOntOsStatus OBJECT-TYPE Ont-Firmware OS status. | 1.3.6.1.4.1.6296.101.23.10.2.1.10 | INTEGER {notupdatable(1), updatable(2), updating(3), updated(4)} | read-only | current |
| sleGponOntFirmwareOntBLStatus OBJECT-TYPE Ont-Firmware BL status. | 1.3.6.1.4.1.6296.101.23.10.2.1.11 | INTEGER {notupdatable(1), updatable(2), updating(3), updated(4)} | read-only | current |
| sleGponOntFirmwareOsUpgrdStatus OBJECT-TYPE Ont-Firmware Upgrade status. | 1.3.6.1.4.1.6296.101.23.10.2.1.12 | INTEGER {none(1), idle(2), downloadImage(3), uncompress(4), downloadBL(5), updating(6), abort(7), rollback(8)} | read-only | current |
| sleGponOntFirmwareOsUpgrdResult OBJECT-TYPE Ont-Firmware Upgrade result. Value Meaning ------------------ 100 Success 101 Upgrade process aborted 102 Transfer fail on Bootloader 103 Transfer fail on AG 104 Transfer fail on BL 105 Cannot find a file 106 ERROR_ONT_FTP_CON_FAIL_AG 107 ERROR_ONT_FTP_CON_FAIL_BL 108 ERROR_ONT_CANNOT_OPEN_FILE_AG 109 ERROR_ONT_INSUFFICIENT_MEM_AG 110 Image checksum error 111 ERROR_ONT_INSUFFICIENT_MEM_AG 112 ERROR_ONT_INSUFFICIENT_MEM_BL 113 Image is corrupted 114 Image is corrupted on AG 115 Image is corrupted on BL 116 ERROR_ONT_TWO_FILES_NO_EXIST 117 Write image is fail on Bootloader 118 Write image is fail on AG 119 Write image is fail on BL 120 Rollback image is fail 121 ERROR_ONT_ROLLBACK 122 ERROR_ONT_TIMEOUT 123 Download timeout on Bootloader 124 Donwload timeout on AG 125 Download timeout on BL 126 Uncompress timeout 127 Write timeout on Bootloader 128 Write timeout on AG 129 Write timeout on BL 130 Rollback timeout on BL 131 Unknown error on Bootloader 132 Unknown error on AG 133 Unknown error on BL | 1.3.6.1.4.1.6296.101.23.10.2.1.13 | INTEGER (1..65535) | read-only | current |
| sleGponOntFirmwareBLUpgrdStatus OBJECT-TYPE Ont-Firmware BL Upgrade status. | 1.3.6.1.4.1.6296.101.23.10.2.1.14 | INTEGER {none(1), idle(2), downloadImage(3), uncompress(4), downloadBL(5), updating(6), abort(7), rollback(8)} | read-only | current |
| sleGponOntFirmwareBLUpgrdResult OBJECT-TYPE Ont-Firmware Upgrade result. Value Meaning ------------------ 100 Success 101 Upgrade process aborted 102 Transfer fail on Bootloader 103 Transfer fail on AG 104 Transfer fail on BL 105 Cannot find a file 106 ERROR_ONT_FTP_CON_FAIL_AG 107 ERROR_ONT_FTP_CON_FAIL_BL 108 ERROR_ONT_CANNOT_OPEN_FILE_AG 109 ERROR_ONT_INSUFFICIENT_MEM_AG 110 Image checksum error 111 ERROR_ONT_INSUFFICIENT_MEM_AG 112 ERROR_ONT_INSUFFICIENT_MEM_BL 113 Image is corrupted 114 Image is corrupted on AG 115 Image is corrupted on BL 116 ERROR_ONT_TWO_FILES_NO_EXIST 117 Write image is fail on Bootloader 118 Write image is fail on AG 119 Write image is fail on BL 120 Rollback image is fail 121 ERROR_ONT_ROLLBACK 122 ERROR_ONT_TIMEOUT 123 Download timeout on Bootloader 124 Donwload timeout on AG 125 Download timeout on BL 126 Uncompress timeout 127 Write timeout on Bootloader 128 Write timeout on AG 129 Write timeout on BL 130 Rollback timeout on BL 131 Unknown error on Bootloader 132 Unknown error on AG 133 Unknown error on BL | 1.3.6.1.4.1.6296.101.23.10.2.1.15 | INTEGER (1..65535) | read-only | current |
| sleGponOntFirmwareControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.10.3 | |||
| sleGponOntFirmwareControlReqest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.10.3.1 | INTEGER {setGponOntFwDownload(1), setGponOntFwUpgrade(2), setGponOntReset(3), deleteGponOntFw(4), deleteGponOntFwAll(5)} | read-write | current |
| sleGponOntFirmwareControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.10.3.2 | SleControlStatusType | read-only | current |
| sleGponOntFirmwareControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.10.3.3 | Gauge32 | read-write | current |
| sleGponOntFirmwareControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.10.3.4 | TimeTicks | read-only | current |
| sleGponOntFirmwareControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.10.3.5 | SleControlRequestResultType | read-only | current |
| sleGponOntFirmwareControlOltId OBJECT-TYPE Ont-Firmware OLT index. | 1.3.6.1.4.1.6296.101.23.10.3.6 | INTEGER (1..2147483647) | read-write | current |
| sleGponOntFirmwareControlOntId OBJECT-TYPE Ont-Firmware ONT index. | 1.3.6.1.4.1.6296.101.23.10.3.7 | INTEGER (1..65535) | read-write | current |
| sleGponOntFirmwareControlType OBJECT-TYPE Ont Firmware type. | 1.3.6.1.4.1.6296.101.23.10.3.8 | INTEGER {os(1), bootloader(2)} | read-write | current |
| sleGponOntFirmwareControlFwName OBJECT-TYPE Ont-Firmware Firmware name. | 1.3.6.1.4.1.6296.101.23.10.3.9 | OCTET STRING | read-write | current |
| sleGponOntFirmwareControlMethod OBJECT-TYPE Ont-Firmware transmission method. | 1.3.6.1.4.1.6296.101.23.10.3.10 | INTEGER {ftp(1), tftp(2)} | read-write | current |
| sleGponOntFirmwareControlServer OBJECT-TYPE Ont-Firmware server address. | 1.3.6.1.4.1.6296.101.23.10.3.11 | IpAddress | read-write | current |
| sleGponOntFirmwareControlUser OBJECT-TYPE Ont-Firmware user name. | 1.3.6.1.4.1.6296.101.23.10.3.12 | OCTET STRING | read-write | current |
| sleGponOntFirmwareControlPasswd OBJECT-TYPE Ont-Firmware user password. | 1.3.6.1.4.1.6296.101.23.10.3.13 | OCTET STRING | read-write | current |
| sleGponOntFirmwareControlOnuId OBJECT-TYPE The ONU id | 1.3.6.1.4.1.6296.101.23.10.3.14 | Integer32 | read-only | current |
| sleGponOntFirmwareNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.10.4 | |||
| sleGponRedundancy OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.11 | |||
| sleGponRedGroupTable OBJECT-TYPE sleGponRedGroupTable | 1.3.6.1.4.1.6296.101.23.11.1 | not-accessible | current | |
| sleGponRedGroupEntry OBJECT-TYPE key: sleGponRedGroupIndex | 1.3.6.1.4.1.6296.101.23.11.1.1 | not-accessible | current | |
| sleGponRedGroupIndex OBJECT-TYPE Gpon redundancy group-id. | 1.3.6.1.4.1.6296.101.23.11.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponRedGroupOltAIndex OBJECT-TYPE Gpon redundancy Olt-A index. | 1.3.6.1.4.1.6296.101.23.11.1.1.2 | Integer32 (1..2147483647) | read-only | current |
| sleGponRedGroupOltAStatus OBJECT-TYPE Gpon redundancy Olt-A status. | 1.3.6.1.4.1.6296.101.23.11.1.1.3 | INTEGER {working(1), standby(2), progress(3), waiting(4), workingPending(5), standbyPending(6), unknown(255)} | read-only | current |
| sleGponRedGroupOltBIndex OBJECT-TYPE Gpon redundancy Olt-B index. | 1.3.6.1.4.1.6296.101.23.11.1.1.4 | Integer32 (1..2147483647) | read-only | current |
| sleGponRedGroupOltBStatus OBJECT-TYPE Gpon redundancy Olt-B status. | 1.3.6.1.4.1.6296.101.23.11.1.1.5 | INTEGER {working(1), standby(2), progress(3), waiting(4), workingPending(5), standbyPending(6), unknown(255)} | read-only | current |
| sleGponRedLastReason OBJECT-TYPE The Last gpon-redundancy reason. | 1.3.6.1.4.1.6296.101.23.11.1.1.6 | INTEGER {none(0), force(1), los(2), slotRemove(3), slotLock(4), slotRestart(5), slotDisable(6), slotReset(7), slotPowerDown(8), gponMacCrash(9), daemonCrash(10), unknown(255)} | read-only | current |
| sleGponRedGroupStandbyLinkStatus OBJECT-TYPE The Standby Link Status. | 1.3.6.1.4.1.6296.101.23.11.1.1.7 | INTEGER {none(0), rxDetect(1), txEnable(2)} | read-only | current |
| sleGponRedGroupSlaveOltAdminStatus OBJECT-TYPE The Slave OLT Admin Status. | 1.3.6.1.4.1.6296.101.23.11.1.1.8 | INTEGER {activation(1), inActivation(2)} | read-only | current |
| sleGponRedGroupTrigger OBJECT-TYPE olt redundancy trigger (los|manual|slot|gpon-mac) (on|off) group GROUP_ID | 1.3.6.1.4.1.6296.101.23.11.1.1.9 | Bits {los(0), manual(1), slotStatus(2), gponMac(3), standbyAct(4)} | read-only | current |
| sleGponRedGroupDbSyncStatus OBJECT-TYPE The DB sync status | 1.3.6.1.4.1.6296.101.23.11.1.1.10 | INTEGER {init(0), same(1), checkDifferent(2), updateSuccess(3), updateFail(4)} | read-only | current |
| sleGponRedGroupStandbyActTriggerTime OBJECT-TYPE The Standby Active Trigger Time ( Unit : Sec ) | 1.3.6.1.4.1.6296.101.23.11.1.1.11 | Integer32 (0 | 5..30) | read-only | current |
| sleGponRedGroupControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.11.2 | |||
| sleGponRedGroupControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.11.2.1 | INTEGER {setGponRedGroup(1), clearGponRedGroup(2), setGponRedForceSwitchover(3), setGponRedStandbyOptic(4), setGponRedSlaveAdminStatus(5), setGponRedTrigger(6), setGponRedSafeSwitchover(7), setGponRedDbSyncCheck(8), setGponRedDbResync(9), setGponRedStandbyActTriggerTime(10)} | read-write | current |
| sleGponRedGroupControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.11.2.2 | SleControlStatusType | read-only | current |
| sleGponRedGroupControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.11.2.3 | Gauge32 | read-write | current |
| sleGponRedGroupControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.11.2.4 | TimeTicks | read-only | current |
| sleGponRedGroupControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.11.2.5 | SleControlRequestResultType | read-only | current |
| sleGponRedGroupControlGroupIndex OBJECT-TYPE Gpon red group Index. | 1.3.6.1.4.1.6296.101.23.11.2.6 | Integer32 | read-write | current |
| sleGponRedGroupControlOltAIndex OBJECT-TYPE Gpon red Olt-A index. | 1.3.6.1.4.1.6296.101.23.11.2.7 | Integer32 (1..2147483647) | read-write | current |
| sleGponRedGroupControlOltBIndex OBJECT-TYPE Gpon red Olt-B index. | 1.3.6.1.4.1.6296.101.23.11.2.8 | Integer32 (1..2147483647) | read-write | current |
| sleGponRedGroupControlStandbyOptic OBJECT-TYPE olt redundancy standby-optic (enable|disable) group GROUP_ID | 1.3.6.1.4.1.6296.101.23.11.2.9 | INTEGER {enable(1), disable(2)} | read-write | current |
| sleGponRedGroupControlStandbyOpticEnableTime OBJECT-TYPE olt redundancy standby-optic (enable|disable) group GROUP_ID (0:permanent|<1-600>) | 1.3.6.1.4.1.6296.101.23.11.2.10 | INTEGER (0 | 1..600) | read-write | current |
| sleGponRedGroupControlSlaveAdminStatus OBJECT-TYPE olt redundancy slave (activate|deactivate) group GROUP_ID | 1.3.6.1.4.1.6296.101.23.11.2.11 | INTEGER {activation(1), inActivation(2)} | read-write | current |
| sleGponRedGroupControlTrigger OBJECT-TYPE olt redundancy trigger (los|manual|slot|gpon-mac) (on|off) group GROUP_ID | 1.3.6.1.4.1.6296.101.23.11.2.12 | Bits {los(0), manual(1), slotStatus(2), gponMac(3), standbyAct(4)} | read-write | current |
| sleGponRedGroupControlStandbyActTriggerTime OBJECT-TYPE The Standby Active Trigger Time ( Unit : Sec ) | 1.3.6.1.4.1.6296.101.23.11.2.13 | Integer32 (5..30) | read-write | current |
| sleGponRedGroupNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.11.3 | |||
| sleGponOnuHost OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.12 | |||
| sleGponOnuHostTable OBJECT-TYPE sleGponOnuHostTable | 1.3.6.1.4.1.6296.101.23.12.1 | not-accessible | current | |
| sleGponOnuHostEntry OBJECT-TYPE key: sleGponOnuHostOltId, sleGponOnuHostOnuId, sleGponOnuHostId | 1.3.6.1.4.1.6296.101.23.12.1.1 | not-accessible | current | |
| sleGponOnuHostOltId OBJECT-TYPE Gpon Olt Index | 1.3.6.1.4.1.6296.101.23.12.1.1.1 | INTEGER (1..2147483647) | read-only | current |
| sleGponOnuHostOnuId OBJECT-TYPE Gpon Onu Index | 1.3.6.1.4.1.6296.101.23.12.1.1.2 | INTEGER (1..256) | read-only | current |
| sleGponOnuHostId OBJECT-TYPE Onu Ip Host Config data Index | 1.3.6.1.4.1.6296.101.23.12.1.1.3 | INTEGER (1..8) | read-only | current |
| sleGponOnuHostIPAddr OBJECT-TYPE Onu IP address | 1.3.6.1.4.1.6296.101.23.12.1.1.4 | IpAddress | read-only | current |
| sleGponOnuHostMask OBJECT-TYPE Onu IP Netmask | 1.3.6.1.4.1.6296.101.23.12.1.1.5 | IpAddress | read-only | current |
| sleGponOnuHostGW OBJECT-TYPE Onu Gateway | 1.3.6.1.4.1.6296.101.23.12.1.1.6 | IpAddress | read-only | current |
| sleGponOnuHostPriDns OBJECT-TYPE The Primary DNS address. | 1.3.6.1.4.1.6296.101.23.12.1.1.7 | IpAddress | read-only | current |
| sleGponOnuHostSecDns OBJECT-TYPE The secondary DNS address | 1.3.6.1.4.1.6296.101.23.12.1.1.8 | IpAddress | read-only | current |
| sleGponOnuHostIpOption OBJECT-TYPE The IP option. 1:enableDhcp, 2, respondPings 4, respondTraceroute | 1.3.6.1.4.1.6296.101.23.12.1.1.9 | Bits {enableDhcp(0), respondPings(1), respondTraceroute(2)} | read-only | current |
| sleGponOnuHostMacAddress OBJECT-TYPE The Mac address. | 1.3.6.1.4.1.6296.101.23.12.1.1.10 | OCTET STRING | read-only | current |
| sleGponOnuHostDomainName OBJECT-TYPE The Domain name | 1.3.6.1.4.1.6296.101.23.12.1.1.11 | OCTET STRING | read-only | current |
| sleGponOnuHostHostName OBJECT-TYPE The host name. | 1.3.6.1.4.1.6296.101.23.12.1.1.12 | OCTET STRING | read-only | current |
| sleGponOnuHostCurIpAddr OBJECT-TYPE The Current IP address. | 1.3.6.1.4.1.6296.101.23.12.1.1.13 | IpAddress | read-only | current |
| sleGponOnuHostCurMask OBJECT-TYPE The Currest Mask. | 1.3.6.1.4.1.6296.101.23.12.1.1.14 | IpAddress | read-only | current |
| sleGponOnuHostCurGW OBJECT-TYPE The current gate way. | 1.3.6.1.4.1.6296.101.23.12.1.1.15 | IpAddress | read-only | current |
| sleGponOnuHostCurPriDns OBJECT-TYPE The current primary DNS address. | 1.3.6.1.4.1.6296.101.23.12.1.1.16 | IpAddress | read-only | current |
| sleGponOnuHostCurSecDns OBJECT-TYPE The current secondary DNS address. | 1.3.6.1.4.1.6296.101.23.12.1.1.17 | IpAddress | read-only | current |
| sleGponOnuHostType OBJECT-TYPE IP Host version Type | 1.3.6.1.4.1.6296.101.23.12.1.1.18 | InetAddressType | read-only | current |
| sleGponOnuHostIPv6LinkLocalAddr OBJECT-TYPE IPv6 link local address | 1.3.6.1.4.1.6296.101.23.12.1.1.19 | InetAddress | read-only | current |
| sleGponOnuHostIPv6Addr OBJECT-TYPE IPv6 address | 1.3.6.1.4.1.6296.101.23.12.1.1.20 | InetAddress | read-only | current |
| sleGponOnuHostIPv6DefaultRouter OBJECT-TYPE IPv6 Default Router | 1.3.6.1.4.1.6296.101.23.12.1.1.21 | InetAddress | read-only | current |
| sleGponOnuHostIPv6PriDns OBJECT-TYPE IPv6 Primary DNS | 1.3.6.1.4.1.6296.101.23.12.1.1.22 | InetAddress | read-only | current |
| sleGponOnuHostIPv6SecDns OBJECT-TYPE IPv6 Secondary DNS | 1.3.6.1.4.1.6296.101.23.12.1.1.23 | InetAddress | read-only | current |
| sleGponOnuHostIPv6PrefixLen OBJECT-TYPE On-link Prefix Length | 1.3.6.1.4.1.6296.101.23.12.1.1.24 | InetAddressPrefixLength | read-only | current |
| sleGponOnuHostIPv6CurDefaultRouter OBJECT-TYPE Current IPv6 Default Router | 1.3.6.1.4.1.6296.101.23.12.1.1.25 | InetAddress | read-only | current |
| sleGponOnuHostIPv6CurPriDns OBJECT-TYPE Current IPv6 Primary DNS | 1.3.6.1.4.1.6296.101.23.12.1.1.26 | InetAddress | read-only | current |
| sleGponOnuHostIPv6CurSecDns OBJECT-TYPE Current IPv6 Secondary DNS | 1.3.6.1.4.1.6296.101.23.12.1.1.27 | InetAddress | read-only | current |
| sleGponOnuHostPppoeAccountUser OBJECT-TYPE Pppoe User Name | 1.3.6.1.4.1.6296.101.23.12.1.1.28 | OCTET STRING | read-only | current |
| sleGponOnuHostPppoeAccountPassword OBJECT-TYPE OCTET STRING Pppoe Password | 1.3.6.1.4.1.6296.101.23.12.1.1.29 | OCTET STRING | read-only | current |
| sleGponOnuHostControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.12.2 | |||
| sleGponOnuHostControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.12.2.1 | INTEGER {setOnuHostIpInfo(1), updateOnuHostInfo(2), setOnuHostIpv6Info(3), setOnuHostPppoeAccount(4)} | read-write | current |
| sleGponOnuHostControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.12.2.2 | SleControlStatusType | read-only | current |
| sleGponOnuHostControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.12.2.3 | Gauge32 | read-write | current |
| sleGponOnuHostControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.12.2.4 | TimeTicks | read-only | current |
| sleGponOnuHostControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.12.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOnuHostControlOltId OBJECT-TYPE The OLT id. | 1.3.6.1.4.1.6296.101.23.12.2.6 | INTEGER (1..2147483647) | read-write | current |
| sleGponOnuHostControlOnuId OBJECT-TYPE The ONU id | 1.3.6.1.4.1.6296.101.23.12.2.7 | INTEGER (1..256) | read-write | current |
| sleGponOnuHostControlId OBJECT-TYPE Onu Ip Host Config data Index | 1.3.6.1.4.1.6296.101.23.12.2.8 | INTEGER (1..8) | read-write | current |
| sleGponOnuHostControlIPAddr OBJECT-TYPE Onu IP address | 1.3.6.1.4.1.6296.101.23.12.2.9 | IpAddress | read-write | current |
| sleGponOnuHostControlMask OBJECT-TYPE Onu IP Netmask | 1.3.6.1.4.1.6296.101.23.12.2.10 | IpAddress | read-write | current |
| sleGponOnuHostControlGW OBJECT-TYPE Onu Gateway | 1.3.6.1.4.1.6296.101.23.12.2.11 | IpAddress | read-write | current |
| sleGponOnuHostControlIPv6Addr OBJECT-TYPE Onu IPv6 address | 1.3.6.1.4.1.6296.101.23.12.2.12 | InetAddress | read-write | current |
| sleGponOnuHostControlIPv6PrefixLen OBJECT-TYPE ONU IPv6 Prefix Length | 1.3.6.1.4.1.6296.101.23.12.2.13 | InetAddressPrefixLength | read-write | current |
| sleGponOnuHostControlIPv6DefaultRouter OBJECT-TYPE Onu IPv6 default router | 1.3.6.1.4.1.6296.101.23.12.2.14 | InetAddress | read-write | current |
| sleGponOnuHostControlIPppoeAccountUser OBJECT-TYPE Pppoe User Name | 1.3.6.1.4.1.6296.101.23.12.2.15 | OCTET STRING | read-write | current |
| sleGponOnuHostControlIPppoeAccountPassword OBJECT-TYPE Pppoe Password | 1.3.6.1.4.1.6296.101.23.12.2.16 | OCTET STRING | read-write | current |
| sleGponOnuHostNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.12.3 | |||
| sleGponOnuIPv6HostCurAddrTable OBJECT-TYPE sleGponOnuHostTable | 1.3.6.1.4.1.6296.101.23.12.4 | not-accessible | current | |
| sleGponOnuIPv6HostCurAddrEntry OBJECT-TYPE key: sleGponOnuHostOltId, sleGponOnuHostOnuId, sleGponOnuHostId | 1.3.6.1.4.1.6296.101.23.12.4.1 | not-accessible | current | |
| sleGponOnuIPv6HostCurAddrOltId OBJECT-TYPE Gpon Olt Index | 1.3.6.1.4.1.6296.101.23.12.4.1.1 | INTEGER (1..2147483647) | read-only | current |
| sleGponOnuIPv6HostCurAddrOnuId OBJECT-TYPE Gpon Onu Index | 1.3.6.1.4.1.6296.101.23.12.4.1.2 | INTEGER (1..256) | read-only | current |
| sleGponOnuIPv6HostCurAddrHostId OBJECT-TYPE Onu Ip Host Config data Index | 1.3.6.1.4.1.6296.101.23.12.4.1.3 | INTEGER (1..8) | read-only | current |
| sleGponOnuIPv6HostCurAddrId OBJECT-TYPE IPv6 Host Current Address Index | 1.3.6.1.4.1.6296.101.23.12.4.1.4 | Integer32 (0..65535) | read-only | current |
| sleGponOnuIPv6HostCurAddr OBJECT-TYPE IPv6 Host Current Address | 1.3.6.1.4.1.6296.101.23.12.4.1.5 | InetAddress | read-only | current |
| sleGponOnuIPv6HostCurDefaultRouterTable OBJECT-TYPE sleGponOnuHostTable | 1.3.6.1.4.1.6296.101.23.12.5 | not-accessible | current | |
| sleGponOnuIPv6HostCurDefaultRouterEntry OBJECT-TYPE key: sleGponOnuHostOltId, sleGponOnuHostOnuId, sleGponOnuHostId | 1.3.6.1.4.1.6296.101.23.12.5.1 | not-accessible | current | |
| sleGponOnuIPv6HostCurDefaultRouterOltId OBJECT-TYPE Gpon Olt Index | 1.3.6.1.4.1.6296.101.23.12.5.1.1 | INTEGER (1..2147483647) | read-only | current |
| sleGponOnuIPv6HostCurDefaultRouterOnuId OBJECT-TYPE Gpon Onu Index | 1.3.6.1.4.1.6296.101.23.12.5.1.2 | INTEGER (1..256) | read-only | current |
| sleGponOnuIPv6HostCurDefaultRouterHostId OBJECT-TYPE Onu Ip Host Config data Index | 1.3.6.1.4.1.6296.101.23.12.5.1.3 | INTEGER (1..8) | read-only | current |
| sleGponOnuIPv6HostCurDefaultRouterId OBJECT-TYPE IPv6 Host Current Address Index | 1.3.6.1.4.1.6296.101.23.12.5.1.4 | Integer32 (0..65535) | read-only | current |
| sleGponOnuIPv6HostCurDefaultRouter OBJECT-TYPE IPv6 Host Current Address | 1.3.6.1.4.1.6296.101.23.12.5.1.5 | InetAddress | read-only | current |
| sleGponOnuIPv6HostCurDnsTable OBJECT-TYPE sleGponOnuHostTable | 1.3.6.1.4.1.6296.101.23.12.6 | not-accessible | current | |
| sleGponOnuIPv6HostCurDnsEntry OBJECT-TYPE key: sleGponOnuHostOltId, sleGponOnuHostOnuId, sleGponOnuHostId | 1.3.6.1.4.1.6296.101.23.12.6.1 | not-accessible | current | |
| sleGponOnuIPv6HostCurDnsOltId OBJECT-TYPE Gpon Olt Index | 1.3.6.1.4.1.6296.101.23.12.6.1.1 | INTEGER (1..2147483647) | read-only | current |
| sleGponOnuIPv6HostCurDnsOnuId OBJECT-TYPE Gpon Onu Index | 1.3.6.1.4.1.6296.101.23.12.6.1.2 | INTEGER (1..256) | read-only | current |
| sleGponOnuIPv6HostCurDnsHostId OBJECT-TYPE Onu Ip Host Config data Index | 1.3.6.1.4.1.6296.101.23.12.6.1.3 | INTEGER (1..8) | read-only | current |
| sleGponOnuIPv6HostCurDnsId OBJECT-TYPE IPv6 Host Current Address Index | 1.3.6.1.4.1.6296.101.23.12.6.1.4 | Integer32 (0..65535) | read-only | current |
| sleGponOnuIPv6HostCurDns OBJECT-TYPE IPv6 Host Current Address | 1.3.6.1.4.1.6296.101.23.12.6.1.5 | InetAddress | read-only | current |
| sleGponIgmpGroup OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.13 | |||
| sleGponIgmpGroupTable OBJECT-TYPE sleGponIgmpGroupTable | 1.3.6.1.4.1.6296.101.23.13.1 | not-accessible | current | |
| sleGponIgmpGroupEntry OBJECT-TYPE key: sleGponIgmpGroupOltId, sleGponIgmpGroupOnuId, sleGponIgmpGroupIndex | 1.3.6.1.4.1.6296.101.23.13.1.1 | not-accessible | current | |
| sleGponIgmpGroupOltId OBJECT-TYPE The OLT id. | 1.3.6.1.4.1.6296.101.23.13.1.1.1 | INTEGER (1..2147483647) | read-only | current |
| sleGponIgmpGroupOnuId OBJECT-TYPE The ONU id. | 1.3.6.1.4.1.6296.101.23.13.1.1.2 | INTEGER (1..256) | read-only | current |
| sleGponIgmpGroupUniId OBJECT-TYPE The UNI id | 1.3.6.1.4.1.6296.101.23.13.1.1.3 | INTEGER (1..65535) | read-only | current |
| sleGponIgmpGroupUniType OBJECT-TYPE The UNI type. | 1.3.6.1.4.1.6296.101.23.13.1.1.4 | INTEGER {ethernet(1), pots(2), ces(3), video(4), virtualEthernet(5), wifi(6), unknown(255)} | read-only | current |
| sleGponIgmpGroupIndex OBJECT-TYPE The IGMP group index. | 1.3.6.1.4.1.6296.101.23.13.1.1.5 | INTEGER (1..65535) | read-only | current |
| sleGponIgmpGroupSrcIPAddr OBJECT-TYPE The source IP address | 1.3.6.1.4.1.6296.101.23.13.1.1.6 | IpAddress | read-only | current |
| sleGponIgmpGroupDstIPAddr OBJECT-TYPE The destination IP address | 1.3.6.1.4.1.6296.101.23.13.1.1.7 | IpAddress | read-only | current |
| sleGponIgmpGroupRptIPAddr OBJECT-TYPE The IP address | 1.3.6.1.4.1.6296.101.23.13.1.1.8 | IpAddress | read-only | current |
| sleGponIgmpGroupJoinTime OBJECT-TYPE The join time. | 1.3.6.1.4.1.6296.101.23.13.1.1.9 | INTEGER (1..65535) | read-only | current |
| sleGponIgmpGroupVlanId OBJECT-TYPE The Vlan Id. | 1.3.6.1.4.1.6296.101.23.13.1.1.10 | INTEGER (1..4094) | read-only | current |
| sleGponIgmpGroupControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.13.2 | |||
| sleGponIgmpGroupControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.13.2.1 | INTEGER {setGponIgmpGroup(1)} | read-write | current |
| sleGponIgmpGroupControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.13.2.2 | SleControlStatusType | read-write | current |
| sleGponIgmpGroupControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.13.2.3 | Gauge32 | read-write | current |
| sleGponIgmpGroupControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.13.2.4 | TimeTicks | read-write | current |
| sleGponIgmpGroupControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.13.2.5 | SleControlRequestResultType | read-write | current |
| sleGponIgmpGroupControlOltId OBJECT-TYPE The OLT id. | 1.3.6.1.4.1.6296.101.23.13.2.6 | Integer32 (1..2147483647) | read-write | current |
| sleGponIgmpGroupControlOnuId OBJECT-TYPE The ONU id. | 1.3.6.1.4.1.6296.101.23.13.2.7 | Integer32 (1..65535) | read-write | current |
| sleGponIgmpGroupNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.13.3 | |||
| sleGponAntiSpoofing OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.14 | |||
| sleGponAntiSpoofingTable OBJECT-TYPE sleGponAntiSpoofingTable | 1.3.6.1.4.1.6296.101.23.14.1 | not-accessible | current | |
| sleGponAntiSpoofingEntry OBJECT-TYPE key: sleGponAntiSpoofingOltId, sleGponAntiSpoofingOnuId, sleGponAntiSpoofingVlanId, sleGponAntiSpoofingMacIndex | 1.3.6.1.4.1.6296.101.23.14.1.1 | not-accessible | current | |
| sleGponAntiSpoofingOltId OBJECT-TYPE The OLT index. | 1.3.6.1.4.1.6296.101.23.14.1.1.1 | INTEGER (1..2147483647) | read-only | current |
| sleGponAntiSpoofingOnuId OBJECT-TYPE The ONU index. | 1.3.6.1.4.1.6296.101.23.14.1.1.2 | INTEGER (1..256) | read-only | current |
| sleGponAntiSpoofingVlanId OBJECT-TYPE The VLAN index. | 1.3.6.1.4.1.6296.101.23.14.1.1.3 | Integer32 (1..4094) | read-only | current |
| sleGponAntiSpoofingMacIndex OBJECT-TYPE The MAC index is only used at 'Get'. | 1.3.6.1.4.1.6296.101.23.14.1.1.4 | INTEGER (1..65535) | read-only | current |
| sleGponAntiSpoofingMac OBJECT-TYPE The OLT mac address. | 1.3.6.1.4.1.6296.101.23.14.1.1.5 | OCTET STRING | read-only | current |
| sleGponAntiSpoofingPortId OBJECT-TYPE The Port index. | 1.3.6.1.4.1.6296.101.23.14.1.1.6 | INTEGER (1..65535) | read-only | current |
| sleGponAntiSpoofingDupPortId OBJECT-TYPE The Duplicated Port index. | 1.3.6.1.4.1.6296.101.23.14.1.1.7 | INTEGER (1..65535) | read-only | current |
| sleGponAntiSpoofingTimerStatus OBJECT-TYPE The Anti-Spoofing Timer. | 1.3.6.1.4.1.6296.101.23.14.1.1.8 | INTEGER (1..65535) | read-only | current |
| sleGponAntiSpoofingFilterStatus OBJECT-TYPE The filter status. | 1.3.6.1.4.1.6296.101.23.14.1.1.9 | INTEGER {filtering(0), notSupport(1)} | read-only | current |
| sleGponAntiSpoofingControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.14.2 | |||
| sleGponAntiSpoofingControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.14.2.1 | INTEGER {updateAntiSpoofingStatus(1), clearAntiSpoofingOlt(2), clearAntiSpoofingOnu(3), clearAntiSpoofingOne(4)} | read-write | current |
| sleGponAntiSpoofingControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.14.2.2 | SleControlStatusType | read-write | current |
| sleGponAntiSpoofingControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.14.2.3 | Gauge32 | read-write | current |
| sleGponAntiSpoofingControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.14.2.4 | TimeTicks | read-write | current |
| sleGponAntiSpoofingControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.14.2.5 | SleControlRequestResultType | read-write | current |
| sleGponAntiSpoofingControlOltId OBJECT-TYPE The OLT index. | 1.3.6.1.4.1.6296.101.23.14.2.6 | INTEGER (1..2147483647) | read-write | current |
| sleGponAntiSpoofingControlOnuId OBJECT-TYPE The ONU index. | 1.3.6.1.4.1.6296.101.23.14.2.7 | INTEGER (1..256) | read-write | current |
| sleGponAntiSpoofingControlVlanId OBJECT-TYPE The VLAN index. | 1.3.6.1.4.1.6296.101.23.14.2.8 | Integer32 (1..4094) | read-write | current |
| sleGponAntiSpoofingControlMac OBJECT-TYPE The OLT mac address. | 1.3.6.1.4.1.6296.101.23.14.2.9 | OCTET STRING | read-write | current |
| sleGponAntiSpoofingControlPortId OBJECT-TYPE The Port index. | 1.3.6.1.4.1.6296.101.23.14.2.10 | INTEGER (1..65535) | read-write | current |
| sleGponAntiSpoofingControlTimerStatus OBJECT-TYPE The Anti-Spoofing Timer. | 1.3.6.1.4.1.6296.101.23.14.2.11 | INTEGER (1..65535) | read-write | current |
| sleGponAntiSpoofingNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.14.3 | |||
| sleGponVlanGemMapping OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.15 | |||
| sleGponVlanGemMappingTable OBJECT-TYPE sleGpoVlanGemMappingTable | 1.3.6.1.4.1.6296.101.23.15.1 | not-accessible | current | |
| sleGponVlanGemMappingEntry OBJECT-TYPE key: sleGponOltId, sleGponOnuId, sleGponVlanGemMappingVid | 1.3.6.1.4.1.6296.101.23.15.1.1 | not-accessible | current | |
| sleGponVlanGemMappingVid OBJECT-TYPE The Vlan ID. | 1.3.6.1.4.1.6296.101.23.15.1.1.1 | INTEGER (1..4094) | read-only | current |
| sleGponVlanGemMappingOnuid OBJECT-TYPE The ONU index. (255 is all onu) | 1.3.6.1.4.1.6296.101.23.15.1.1.2 | INTEGER (1..256) | read-only | current |
| sleGponVlanGemMappingMapperId OBJECT-TYPE The mapper ID. (4095 is multicast gem) | 1.3.6.1.4.1.6296.101.23.15.1.1.3 | INTEGER (1..65535) | read-only | current |
| sleGponVlanGemMappingGemPort OBJECT-TYPE The GEM port. | 1.3.6.1.4.1.6296.101.23.15.1.1.4 | INTEGER (1..65535) | read-only | current |
| sleGponVlanGemMappingControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.15.2 | |||
| sleGponVlanGemMappingControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.15.2.1 | INTEGER {setVlanGemMapping(1), clearVlanGemMapping(2), clearOnuVlanGemMapping(3), clearOltVlanGemMapping(4)} | read-write | current |
| sleGponVlanGemMappingControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.15.2.2 | SleControlStatusType | read-only | current |
| sleGponVlanGemMappingControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.15.2.3 | Gauge32 | read-write | current |
| sleGponVlanGemMappingControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.15.2.4 | TimeTicks | read-only | current |
| sleGponVlanGemMappingControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.15.2.5 | SleControlRequestResultType | read-only | current |
| sleGponVlanGemMappingControlOltId OBJECT-TYPE The OLT ID. | 1.3.6.1.4.1.6296.101.23.15.2.6 | INTEGER (1..2147483647) | read-write | current |
| sleGponVlanGemMappingControlOnuId OBJECT-TYPE The ONU index. (255 is all onu) | 1.3.6.1.4.1.6296.101.23.15.2.7 | INTEGER (1..256) | read-write | current |
| sleGponVlanGemMappingControlVid OBJECT-TYPE The Vlan ID. | 1.3.6.1.4.1.6296.101.23.15.2.8 | INTEGER (1..4094) | read-write | current |
| sleGponVlanGemMappingControlMapperId OBJECT-TYPE The mapper ID. (4095 is multicast gem) | 1.3.6.1.4.1.6296.101.23.15.2.9 | INTEGER (1..65535) | read-write | current |
| sleGponVlanGemMappingControlVidTo OBJECT-TYPE The Vlan ID. | 1.3.6.1.4.1.6296.101.23.15.2.10 | INTEGER (1..4094) | read-write | current |
| sleGpoVlanGemMappingNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.15.3 | |||
| sleGponGemPort OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.16 | |||
| sleGponGemPortTable OBJECT-TYPE sleGponGemPortTable | 1.3.6.1.4.1.6296.101.23.16.1 | not-accessible | current | |
| sleGponGemPortEntry OBJECT-TYPE key : sleGponOltId, sleGponOnuId, sleGponGemPortId | 1.3.6.1.4.1.6296.101.23.16.1.1 | not-accessible | current | |
| sleGponGemPortId OBJECT-TYPE the GEM port index. | 1.3.6.1.4.1.6296.101.23.16.1.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponGemPortNum OBJECT-TYPE The GEM Port number. | 1.3.6.1.4.1.6296.101.23.16.1.1.2 | INTEGER (128..4096) | read-only | current |
| sleGponGemPortMapperId OBJECT-TYPE The mapper index. | 1.3.6.1.4.1.6296.101.23.16.1.1.3 | INTEGER (1..65535) | read-only | current |
| sleGponGemPortCos OBJECT-TYPE The CoS value. | 1.3.6.1.4.1.6296.101.23.16.1.1.4 | Bits {cos0(0), cos1(1), cos2(2), cos3(3), cos4(4), cos5(5), cos6(6), cos7(7)} | read-only | current |
| sleGponOnuMcast OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.17 | |||
| sleGponOnuMcastAcl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.17.1 | |||
| sleGponOnuMcastAclTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.17.1.1 | not-accessible | current | |
| sleGponOnuMcastAclEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.17.1.1.1 | not-accessible | current | |
| sleGponOnuMcastAclOltId OBJECT-TYPE The OLT index. | 1.3.6.1.4.1.6296.101.23.17.1.1.1.1 | Integer32 (1..2147483647) | read-only | current |
| sleGponOnuMcastAclOnuId OBJECT-TYPE The ONU index. | 1.3.6.1.4.1.6296.101.23.17.1.1.1.2 | Integer32 (1..256) | read-only | current |
| sleGponOnuMcastAclMcastIndex OBJECT-TYPE The Mcast Index. | 1.3.6.1.4.1.6296.101.23.17.1.1.1.3 | Integer32 (1..65535) | read-only | current |
| sleGponOnuMcastAclMcastName OBJECT-TYPE The Mcast name. | 1.3.6.1.4.1.6296.101.23.17.1.1.1.4 | OCTET STRING | read-only | current |
| sleGponOnuMcastAclTableIndex OBJECT-TYPE The table index. | 1.3.6.1.4.1.6296.101.23.17.1.1.1.5 | Integer32 (1..65535) | read-only | current |
| sleGponOnuMcastAclVid OBJECT-TYPE The vlan index. | 1.3.6.1.4.1.6296.101.23.17.1.1.1.6 | Integer32 (1..4094) | read-only | current |
| sleGponOnuMcastAclDstIpStart OBJECT-TYPE The destination start ip-address. | 1.3.6.1.4.1.6296.101.23.17.1.1.1.7 | IpAddress | read-only | current |
| sleGponOnuMcastAclDstIpEnd OBJECT-TYPE The destination end ip-address. | 1.3.6.1.4.1.6296.101.23.17.1.1.1.8 | IpAddress | read-only | current |
| sleGponOnuMcastAclSrcIp OBJECT-TYPE The source ip-address. | 1.3.6.1.4.1.6296.101.23.17.1.1.1.9 | IpAddress | read-only | current |
| sleGponOnuMcastAclBandwidth OBJECT-TYPE The bandwidth | 1.3.6.1.4.1.6296.101.23.17.1.1.1.10 | Integer32 | read-only | current |
| sleGponOnuMcastAclGem OBJECT-TYPE The Gem port index. | 1.3.6.1.4.1.6296.101.23.17.1.1.1.11 | Integer32 (1..65535) | read-only | current |
| sleGponOnuMcastAclControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.17.1.2 | |||
| sleGponOnuMcastAclControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.17.1.2.1 | INTEGER {createMcastAcl(1), clearMcastAcl(2), clearMcastAclOnu(3), clearMcastAclOlt(4)} | read-write | current |
| sleGponOnuMcastAclControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.17.1.2.2 | SleControlStatusType | read-only | current |
| sleGponOnuMcastAclControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.17.1.2.3 | Gauge32 | read-write | current |
| sleGponOnuMcastAclControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.17.1.2.4 | TimeTicks | read-only | current |
| sleGponOnuMcastAclControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.17.1.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOnuMcastAclControlOltId OBJECT-TYPE The OLT index. | 1.3.6.1.4.1.6296.101.23.17.1.2.6 | Integer32 (1..2147483647) | read-write | current |
| sleGponOnuMcastAclControlOnuId OBJECT-TYPE The ONU index. | 1.3.6.1.4.1.6296.101.23.17.1.2.7 | Integer32 (1..256) | read-write | current |
| sleGponOnuMcastAclControlMcastName OBJECT-TYPE The Mcase name. | 1.3.6.1.4.1.6296.101.23.17.1.2.8 | OCTET STRING | read-write | current |
| sleGponOnuMcastAclControlTableIndex OBJECT-TYPE The table index. | 1.3.6.1.4.1.6296.101.23.17.1.2.9 | Integer32 (1..65535) | read-write | current |
| sleGponOnuMcastAclControlVid OBJECT-TYPE The vlan index. | 1.3.6.1.4.1.6296.101.23.17.1.2.10 | Integer32 (1..4094) | read-write | current |
| sleGponOnuMcastAclControlDstIpStart OBJECT-TYPE The destination start ip-address. | 1.3.6.1.4.1.6296.101.23.17.1.2.11 | IpAddress | read-write | current |
| sleGponOnuMcastAclControlDstIpEnd OBJECT-TYPE The destination end ip-address. | 1.3.6.1.4.1.6296.101.23.17.1.2.12 | IpAddress | read-write | current |
| sleGponOnuMcastAclControlSrcIp OBJECT-TYPE The source ip-address. | 1.3.6.1.4.1.6296.101.23.17.1.2.13 | IpAddress | read-write | current |
| sleGponOnuMcastAclControlBandwidth OBJECT-TYPE The bandwidth | 1.3.6.1.4.1.6296.101.23.17.1.2.14 | Integer32 | read-write | current |
| sleGponOnuMcastAclControlGem OBJECT-TYPE The Gem port index. | 1.3.6.1.4.1.6296.101.23.17.1.2.15 | Integer32 (1..65535) | read-write | current |
| sleGponOnuMcastAclNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.17.1.3 | |||
| sleGponFlowMapping OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.18 | |||
| sleGponFlowMappingMethod OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.18.1 | |||
| sleGponFlowMappingMethodTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.18.1.1 | not-accessible | current | |
| sleGponFlowMappingMethodEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.18.1.1.1 | not-accessible | current | |
| sleGponFlowMappingMethodVid OBJECT-TYPE The VLAN index. | 1.3.6.1.4.1.6296.101.23.18.1.1.1.1 | Integer32 (1..4094) | read-only | current |
| sleGponFlowMappingMethodType OBJECT-TYPE The method type. | 1.3.6.1.4.1.6296.101.23.18.1.1.1.2 | INTEGER {vid(1), mac(2), macVid(3)} | read-only | current |
| sleGponFlowMappingMethodControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.18.1.2 | |||
| sleGponFlowMappingMethodControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.18.1.2.1 | INTEGER {setFlowMappingMethod(1), clearFlowMappingMethod(2), clearFlowMappingMethodOlt(3)} | read-write | current |
| sleGponFlowMappingMethodControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.18.1.2.2 | SleControlStatusType | read-only | current |
| sleGponFlowMappingMethodControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.18.1.2.3 | Gauge32 | read-write | current |
| sleGponFlowMappingMethodControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.18.1.2.4 | TimeTicks | read-only | current |
| sleGponFlowMappingMethodControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.18.1.2.5 | SleControlRequestResultType | read-only | current |
| sleGponFlowMappingMethodControlOltId OBJECT-TYPE The OLT ID. | 1.3.6.1.4.1.6296.101.23.18.1.2.6 | Integer32 (1..2147483647) | read-write | current |
| sleGponFlowMappingMethodControlVid OBJECT-TYPE The Vlan ID. | 1.3.6.1.4.1.6296.101.23.18.1.2.7 | INTEGER (1..4094) | read-write | current |
| sleGponFlowMappingMethodControlType OBJECT-TYPE The method type. | 1.3.6.1.4.1.6296.101.23.18.1.2.8 | INTEGER {vid(1), mac(2), macVid(3)} | read-write | current |
| sleGponFlowMappingMethodNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.18.1.3 | |||
| sleGponOnuMac OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.19 | |||
| sleGponOnuMacTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.19.1 | not-accessible | current | |
| sleGponOnuMacEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.19.1.1 | not-accessible | current | |
| sleGponOnuMacSlotIndex OBJECT-TYPE The slot index. | 1.3.6.1.4.1.6296.101.23.19.1.1.1 | INTEGER {ethernet(1), pots(2), ces(3), video(4), virtualEthernet(5)} | read-only | current |
| sleGponOnuMacPortIndex OBJECT-TYPE The port index. | 1.3.6.1.4.1.6296.101.23.19.1.1.2 | Integer32 (1..65523) | read-only | current |
| sleGponOnuMacIndex OBJECT-TYPE The MAC index. | 1.3.6.1.4.1.6296.101.23.19.1.1.3 | Integer32 (1..8000) | read-only | current |
| sleGponOnuMacAddress OBJECT-TYPE The MAC address. | 1.3.6.1.4.1.6296.101.23.19.1.1.4 | OCTET STRING | read-only | current |
| sleGponOnuMacPolicy OBJECT-TYPE The MAC policy | 1.3.6.1.4.1.6296.101.23.19.1.1.5 | INTEGER {forward(1), filter(2)} | read-only | current |
| sleGponOnuMacStatus OBJECT-TYPE The MAC status. | 1.3.6.1.4.1.6296.101.23.19.1.1.6 | INTEGER {static(1), dynamic(2)} | read-only | current |
| sleGponOnuMacAge OBJECT-TYPE the MAC age | 1.3.6.1.4.1.6296.101.23.19.1.1.7 | Integer32 | read-only | current |
| sleGponOnuMacControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.19.2 | |||
| sleGponOnuMacControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.19.2.1 | INTEGER {updateOnuMac(1)} | read-write | current |
| sleGponOnuMacControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.19.2.2 | SleControlStatusType | read-only | current |
| sleGponOnuMacControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.19.2.3 | Gauge32 | read-write | current |
| sleGponOnuMacControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.19.2.4 | TimeTicks | read-only | current |
| sleGponOnuMacControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.19.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOnuMacControlOltIndex OBJECT-TYPE The OLT index. | 1.3.6.1.4.1.6296.101.23.19.2.6 | Integer32 (1..2147483647) | read-write | current |
| sleGponOnuMacControlOnuIndex OBJECT-TYPE The ONU index. | 1.3.6.1.4.1.6296.101.23.19.2.7 | Integer32 | read-write | current |
| sleGponOnuMacControlSlotIndex OBJECT-TYPE The slot index. | 1.3.6.1.4.1.6296.101.23.19.2.8 | INTEGER {ethernet(1), pots(2), ces(3), video(4), virtualEthernet(5)} | read-write | current |
| sleGponOnuMacControlPortIndex OBJECT-TYPE The port index. | 1.3.6.1.4.1.6296.101.23.19.2.9 | Integer32 | read-write | current |
| sleGponOnuMacNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.19.3 | |||
| sleGponOnuMacFilter OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.20 | |||
| sleGponOnuMacFilterTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.20.1 | not-accessible | current | |
| sleGponOnuMacFilterEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.20.1.1 | not-accessible | current | |
| sleGponOnuMacFilterOltId OBJECT-TYPE The OLT index. | 1.3.6.1.4.1.6296.101.23.20.1.1.1 | Integer32 (1..2147483647) | read-only | current |
| sleGponOnuMacFilterOnuId OBJECT-TYPE The ONU index. | 1.3.6.1.4.1.6296.101.23.20.1.1.2 | Integer32 | read-only | current |
| sleGponOnuMacFilterSlotType OBJECT-TYPE The slot type. | 1.3.6.1.4.1.6296.101.23.20.1.1.3 | INTEGER {ethernet(1), iphost(2), ces(3), virtualEthernet(4), mapper(5), gem(6)} | read-only | current |
| sleGponOnuMacFilterPortId OBJECT-TYPE The port index | 1.3.6.1.4.1.6296.101.23.20.1.1.4 | Integer32 (1..65535) | read-only | current |
| sleGponOnuMacFilterMac OBJECT-TYPE The MAC address. | 1.3.6.1.4.1.6296.101.23.20.1.1.5 | OCTET STRING | read-only | current |
| sleGponOnuMacFilterType OBJECT-TYPE The MAC filter type. filter mode 1 forward mode 2 | 1.3.6.1.4.1.6296.101.23.20.1.1.6 | INTEGER {filter(1), forward(2)} | read-only | current |
| sleGponOnuMacFilterControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.20.2 | |||
| sleGponOnuMacFilterControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.20.2.1 | INTEGER {setOnuMacFilter(1), delOnuMacFilter(2)} | read-write | current |
| sleGponOnuMacFilterControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.20.2.2 | SleControlStatusType | read-only | current |
| sleGponOnuMacFilterControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.20.2.3 | Gauge32 | read-write | current |
| sleGponOnuMacFilterControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.20.2.4 | TimeTicks | read-only | current |
| sleGponOnuMacFilterControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.20.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOnuMacFilterControlOltIndex OBJECT-TYPE The OLT index. | 1.3.6.1.4.1.6296.101.23.20.2.6 | Integer32 (1..2147483647) | read-write | current |
| sleGponOnuMacFilterControlOnuIndex OBJECT-TYPE The ONU index. | 1.3.6.1.4.1.6296.101.23.20.2.7 | Integer32 | read-write | current |
| sleGponOnuMacFilterControlSlotType OBJECT-TYPE The slot index. | 1.3.6.1.4.1.6296.101.23.20.2.8 | INTEGER {ethernet(1), iphost(2), ces(3), virtualEthernet(4), mapper(5), gem(6)} | read-write | current |
| sleGponOnuMacFilterControlPortIndex OBJECT-TYPE The port index. | 1.3.6.1.4.1.6296.101.23.20.2.9 | Integer32 | read-write | current |
| sleGponOnuMacFilterControlMac OBJECT-TYPE The mac address | 1.3.6.1.4.1.6296.101.23.20.2.10 | OCTET STRING | read-write | current |
| sleGponOnuMacFilterControlType OBJECT-TYPE The MAC filter type. filter mode 1 forward mode 2 | 1.3.6.1.4.1.6296.101.23.20.2.11 | INTEGER {filter(1), forward(2)} | read-write | current |
| sleGponOnuMacFilterNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.20.3 | |||
| sleGponOnuMcastAccessList OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.21 | |||
| sleGponOnuMcastAccessListTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.21.1 | not-accessible | current | |
| sleGponOnuMcastAccessListEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.21.1.1 | not-accessible | current | |
| sleGponOnuMcastAccessListOltId OBJECT-TYPE The OLT index. | 1.3.6.1.4.1.6296.101.23.21.1.1.1 | Integer32 (1..2147483647) | read-only | current |
| sleGponOnuMcastAccessListOnuId OBJECT-TYPE The ONU index. | 1.3.6.1.4.1.6296.101.23.21.1.1.2 | Integer32 (1..65523) | read-only | current |
| sleGponOnuMcastAccessListIndex OBJECT-TYPE The Multicast ACL index. | 1.3.6.1.4.1.6296.101.23.21.1.1.3 | Integer32 (0..65535) | read-write | current |
| sleGponOnuMcastAccessListName OBJECT-TYPE The Mcast ACL name. | 1.3.6.1.4.1.6296.101.23.21.1.1.4 | OCTET STRING | read-only | current |
| sleGponOnuMcastAccessListProfileName OBJECT-TYPE The multicast-profile NAME | 1.3.6.1.4.1.6296.101.23.21.1.1.5 | OCTET STRING | read-only | current |
| sleGponOnuMcastAccessListProfileIndex OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.21.1.1.6 | Integer32 (0..65535) | read-only | current |
| sleGponOnuMcastAccessListControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.21.2 | |||
| sleGponOnuMcastAccessListControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.21.2.1 | INTEGER {addMcastACL(1), delMcastACL(2), delMcastACLOnu(3), delMcastACLOlt(4)} | read-write | current |
| sleGponOnuMcastAccessListControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.21.2.2 | SleControlStatusType | read-only | current |
| sleGponOnuMcastAccessListControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.21.2.3 | Gauge32 | read-write | current |
| sleGponOnuMcastAccessListControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.21.2.4 | TimeTicks | read-only | current |
| sleGponOnuMcastAccessListControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.21.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOnuMcastAccessListControlOltIndex OBJECT-TYPE The OLT index. | 1.3.6.1.4.1.6296.101.23.21.2.6 | Integer32 (1..2147483647) | read-write | current |
| sleGponOnuMcastAccessListControlOnuIndex OBJECT-TYPE The ONU index. | 1.3.6.1.4.1.6296.101.23.21.2.7 | Integer32 | read-write | current |
| sleGponOnuMcastAccessListControlName OBJECT-TYPE The Mcast ACL name. | 1.3.6.1.4.1.6296.101.23.21.2.8 | OCTET STRING | read-write | current |
| sleGponOnuMcastAccessListControlProfileName OBJECT-TYPE The multicast-profile NAME | 1.3.6.1.4.1.6296.101.23.21.2.9 | OCTET STRING | read-write | current |
| sleGponOnuMcastAccessListNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.21.3 | |||
| sleGponOnuAuth OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.22 | |||
| sleGponOnuAuthTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.22.1 | not-accessible | current | |
| sleGponOnuAuthEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.22.1.1 | not-accessible | current | |
| sleGponOnuAuthIndex OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.22.1.1.1 | Integer32 (0..65535) | read-only | current |
| sleGponOnuAuthAddress OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.22.1.1.2 | IpAddress | read-only | current |
| sleGponOnuAuthKey OBJECT-TYPE Per Server encryption key | 1.3.6.1.4.1.6296.101.23.22.1.1.3 | OCTET STRING | read-only | current |
| sleGponOnuAuthPort OBJECT-TYPE UDP port for Radius authentication server (Default 1812) | 1.3.6.1.4.1.6296.101.23.22.1.1.4 | Integer32 (0..65535) | read-only | current |
| sleGponOnuAuthControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.22.2 | |||
| sleGponOnuAuthControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.22.2.1 | INTEGER {setOnuAuthServer(1), delOnuAuthServer(2)} | read-write | current |
| sleGponOnuAuthControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.22.2.2 | SleControlStatusType | read-only | current |
| sleGponOnuAuthControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.22.2.3 | Gauge32 | read-write | current |
| sleGponOnuAuthControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.22.2.4 | TimeTicks | read-only | current |
| sleGponOnuAuthControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.22.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOnuAuthControlAddress OBJECT-TYPE The IP address of Radius server | 1.3.6.1.4.1.6296.101.23.22.2.6 | IpAddress | read-write | current |
| sleGponOnuAuthControlKey OBJECT-TYPE Per Server encryption key | 1.3.6.1.4.1.6296.101.23.22.2.7 | OCTET STRING | read-write | current |
| sleGponOnuAuthControlPort OBJECT-TYPE UDP port for Radius authentication server (Default 1812) | 1.3.6.1.4.1.6296.101.23.22.2.8 | Integer32 (0..65535) | read-write | current |
| sleGponOnuAuthNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.22.3 | |||
| sleGponOnuExtVlanTag OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.23 | |||
| sleGponOnuExtVlanTagTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.23.1 | not-accessible | current | |
| sleGponOnuExtVlanTagEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.23.1.1 | not-accessible | current | |
| sleGponOnuExtVlanTagTreatInnerCopyVid OBJECT-TYPE The Treatment inner VID rule | 1.3.6.1.4.1.6296.101.23.23.1.1.1 | Integer32 (0..4094) | read-only | current |
| sleGponOnuExtVlanTagTreatInnerCopyCos OBJECT-TYPE The Treatment inner Cos rule (0..7) 8: copyInnerPriority 9: copyOuterPriority 10: dscpToPbit | 1.3.6.1.4.1.6296.101.23.23.1.1.2 | INTEGER | read-only | current |
| sleGponOnuExtVlanTagControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.23.2 | |||
| sleGponOnuExtVlanTagControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.23.2.1 | INTEGER {addOnuExtendedVlanFrameTreatInner(1), delOnuExtendVlanFrameTreatInner(2)} | read-write | current |
| sleGponOnuExtVlanTagControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.23.2.2 | SleControlStatusType | read-only | current |
| sleGponOnuExtVlanTagControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.23.2.3 | Gauge32 | read-write | current |
| sleGponOnuExtVlanTagControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.23.2.4 | TimeTicks | read-only | current |
| sleGponOnuExtVlanTagControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.23.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOnuExtVlanTagControlOltIndex OBJECT-TYPE The OLT index. | 1.3.6.1.4.1.6296.101.23.23.2.6 | Integer32 (1..2147483647) | read-write | current |
| sleGponOnuExtVlanTagControlOnuIndex OBJECT-TYPE The ONU index. | 1.3.6.1.4.1.6296.101.23.23.2.7 | Integer32 | read-write | current |
| sleGponOnuExtVlanTagControlProfileName OBJECT-TYPE The Extended Vlan Tagging Operation profile Name | 1.3.6.1.4.1.6296.101.23.23.2.8 | OCTET STRING | read-write | current |
| sleGponOnuExtVlanTagControlFrameType OBJECT-TYPE The tag frame type | 1.3.6.1.4.1.6296.101.23.23.2.9 | INTEGER {unTaggedFrame(1), singleTaggedFrame(2), doubleTaggedFrame(3)} | read-write | current |
| sleGponOnuExtVlanTagControlFrameIndex OBJECT-TYPE The tag frame table index | 1.3.6.1.4.1.6296.101.23.23.2.10 | Integer32 | read-write | current |
| sleGponOnuExtVlanTagControlTreatInnerCopyVid OBJECT-TYPE (0..4094) 4096 : copyInnerVid 4097 : copyOuter Vid | 1.3.6.1.4.1.6296.101.23.23.2.11 | INTEGER | read-write | current |
| sleGponOnuExtVlanTagControlTreatInnerCopyCos OBJECT-TYPE (0..7) 8: copyInnerPriority 9: copyOuterPriority 10: dscpToPbit | 1.3.6.1.4.1.6296.101.23.23.2.12 | INTEGER | read-write | current |
| sleGponOnuMExtVlanTagNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.23.3 | |||
| sleGponCfm OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.24 | |||
| sleGponCfmMd OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.24.1 | |||
| sleGponCfmMdTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.24.1.1 | not-accessible | current | |
| sleGponCfmMdEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.24.1.1.1 | not-accessible | current | |
| sleGponCmfMdIndex OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.24.1.1.1.1 | Integer32 (0..65535) | read-only | current |
| sleGponCfmMdName OBJECT-TYPE The Maintenance Domain Name | 1.3.6.1.4.1.6296.101.23.24.1.1.1.2 | OCTET STRING | read-only | current |
| sleGponCfmMdLevel OBJECT-TYPE The Maintenance Domain level | 1.3.6.1.4.1.6296.101.23.24.1.1.1.3 | INTEGER (0..7) | read-write | current |
| sleGponCfmMdControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.24.1.2 | |||
| sleGponCfmMdControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.24.1.2.1 | INTEGER {setCfmMd(1), delCfmMd(2)} | read-write | current |
| sleGponCfmMdControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.24.1.2.2 | SleControlStatusType | read-only | current |
| sleGponCfmMdControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.24.1.2.3 | Gauge32 | read-write | current |
| sleGponCfmMdControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.24.1.2.4 | TimeTicks | read-only | current |
| sleGponCfmMdControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.24.1.2.5 | SleControlRequestResultType | read-only | current |
| sleGponCfmMdControlName OBJECT-TYPE The Maintenance Domain Name | 1.3.6.1.4.1.6296.101.23.24.1.2.6 | OCTET STRING | read-write | current |
| sleGponCfmMdControlLevel OBJECT-TYPE The Maintenance Domain level | 1.3.6.1.4.1.6296.101.23.24.1.2.7 | INTEGER (0..7) | read-write | current |
| sleGponCfmMdNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.24.1.3 | |||
| sleGponCfmMa OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.24.2 | |||
| sleGponCfmMaTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.24.2.1 | not-accessible | current | |
| sleGponCfmMaEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.24.2.1.1 | not-accessible | current | |
| sleGponCmfMaKey OBJECT-TYPE The maintenance association Index. | 1.3.6.1.4.1.6296.101.23.24.2.1.1.1 | Integer32 (0..65535) | read-only | current |
| sleGponCfmMaNameFormat OBJECT-TYPE The maintenance association format of name | 1.3.6.1.4.1.6296.101.23.24.2.1.1.2 | INTEGER {primaryVID(1), characterString(2), twoOctetInteger(3), vpnId(4), unknown(255)} | read-only | current |
| sleGponCfmMaName OBJECT-TYPE The maintenance association name. | 1.3.6.1.4.1.6296.101.23.24.2.1.1.3 | OCTET STRING | read-only | current |
| sleGponCfmMaCcmInterval OBJECT-TYPE The maintenance association CCMs interval.. If CCMs are enabled on an MEP, the CCM interval attribute specifies the rate at which they are generated. The MEP also expects to receive CCMs from each of the other MEPs in its CC database at this rate. | 1.3.6.1.4.1.6296.101.23.24.2.1.1.4 | INTEGER {disable(0), interval3dot33msec(1), inteval10msec(2), interval100msec(3), itnerval1sec(4), interval10sec(5), inteval1min(6), interval10min(7), unknown(255)} | read-only | current |
| sleGponCfmMaMdName OBJECT-TYPE This Name specifies the dot1ag maintenance domain with which this MA is associated. | 1.3.6.1.4.1.6296.101.23.24.2.1.1.5 | OCTET STRING | read-only | current |
| sleGponCfmMaControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.24.2.2 | |||
| sleGponCfmMaControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.24.2.2.1 | INTEGER {setCfmMa(1), delCfmMa(2)} | read-write | current |
| sleGponCfmMaControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.24.2.2.2 | SleControlStatusType | read-only | current |
| sleGponCfmMaControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.24.2.2.3 | Gauge32 | read-write | current |
| sleGponCfmMaControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.24.2.2.4 | TimeTicks | read-only | current |
| sleGponCfmMaControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.24.2.2.5 | SleControlRequestResultType | read-only | current |
| sleGponCfmMaControlKey OBJECT-TYPE The maintenance association Index | 1.3.6.1.4.1.6296.101.23.24.2.2.6 | Integer32 | read-write | current |
| sleGponCfmMaControlNameFormat OBJECT-TYPE The maintenance association format of name | 1.3.6.1.4.1.6296.101.23.24.2.2.7 | INTEGER {primaryVID(1), characterString(2), twoOctetInteger(3), vpnId(4), unknown(255)} | read-write | current |
| sleGponCfmMaControlName OBJECT-TYPE The maintenance association name. | 1.3.6.1.4.1.6296.101.23.24.2.2.8 | OCTET STRING | read-write | current |
| sleGponCfmMaControlCcmInterval OBJECT-TYPE The maintenance association CCMs interval.. If CCMs are enabled on an MEP, the CCM interval attribute specifies the rate at which they are generated. The MEP also expects to receive CCMs from each of the other MEPs in its CC database at this rate. | 1.3.6.1.4.1.6296.101.23.24.2.2.9 | INTEGER {disable(0), interval3dot33msec(1), interval10msec(2), interval100msec(3), interval1sec(4), interval10sec(5), interval1min(6), interval10min(7), unknown(255)} | read-write | current |
| sleGponCfmMaControlMdName OBJECT-TYPE This Name specifies the dot1ag maintenance domain with which this MA is associated. | 1.3.6.1.4.1.6296.101.23.24.2.2.10 | OCTET STRING | read-write | current |
| sleGponCfmMaNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.24.2.3 | |||
| sleGponCfmMep OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.24.3 | |||
| sleGponCfmMepTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.24.3.1 | not-accessible | current | |
| sleGponCfmMepEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.24.3.1.1 | not-accessible | current | |
| sleGponCfmMepSlotType OBJECT-TYPE The slot Type | 1.3.6.1.4.1.6296.101.23.24.3.1.1.1 | INTEGER {ethernet(1), iphost(2), ces(3), virtualEthernet(4), mapper(5), gem(6), bridgeAni(7)} | read-only | current |
| sleGponCfmMepPortIndex OBJECT-TYPE The port index. | 1.3.6.1.4.1.6296.101.23.24.3.1.1.2 | Integer32 (0..65535) | read-only | current |
| sleGponCfmMepMepid OBJECT-TYPE This attribute specifies the MEP's own identity in the MA. For a given MA, the MEP ID must be unique throughout the network defined by the MD. The MEP ID is defined in the range 1..8191. | 1.3.6.1.4.1.6296.101.23.24.3.1.1.3 | INTEGER (1..8191) | read-only | current |
| sleGponCfmMepPriVlanid OBJECT-TYPE The MEP's Vlan ID | 1.3.6.1.4.1.6296.101.23.24.3.1.1.4 | INTEGER (1..4095) | read-only | current |
| sleGponCfmMepPeerMepid OBJECT-TYPE The MEP's peer identity in th MA. | 1.3.6.1.4.1.6296.101.23.24.3.1.1.5 | INTEGER (1..8191) | read-only | current |
| sleGponCfmMepMaKey OBJECT-TYPE The maintenance association Index. | 1.3.6.1.4.1.6296.101.23.24.3.1.1.6 | Integer32 | read-only | current |
| sleGponCfmMepCcm OBJECT-TYPE MEP generates continuity check messages | 1.3.6.1.4.1.6296.101.23.24.3.1.1.7 | INTEGER {enable(1), disable(2)} | read-only | current |
| sleGponCfmMepControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.24.3.2 | |||
| sleGponCfmMepControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.24.3.2.1 | INTEGER {setCfmMep(1), delCfmMep(2), clearCfmMep(3), setCfmMepCcm(4)} | read-write | current |
| sleGponCfmMepControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.24.3.2.2 | SleControlStatusType | read-only | current |
| sleGponCfmMepControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.24.3.2.3 | Gauge32 | read-write | current |
| sleGponCfmMepControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.24.3.2.4 | TimeTicks | read-only | current |
| sleGponCfmMepControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.24.3.2.5 | SleControlRequestResultType | read-only | current |
| sleGponCfmMepControlOltId OBJECT-TYPE Gpon Olt Index | 1.3.6.1.4.1.6296.101.23.24.3.2.6 | Integer32 (1..2147483647) | read-write | current |
| sleGponCfmMepControlOnuId OBJECT-TYPE Gpon Onu Index | 1.3.6.1.4.1.6296.101.23.24.3.2.7 | Integer32 | read-write | current |
| sleGponCfmMepControlSlotType OBJECT-TYPE The slot Type | 1.3.6.1.4.1.6296.101.23.24.3.2.8 | INTEGER {ethernet(1), iphost(2), ces(3), virtualEthernet(4), mapper(5), gem(6), bridgeAni(7)} | read-write | current |
| sleGponCfmMepControlPortIndex OBJECT-TYPE The port index. | 1.3.6.1.4.1.6296.101.23.24.3.2.9 | Integer32 | read-write | current |
| sleGponCfmMepControlMepid OBJECT-TYPE This attribute specifies the MEP's own identity in the MA. For a given MA, the MEP ID must be unique throughout the network defined by the MD. The MEP ID is defined in the range 1..8191. | 1.3.6.1.4.1.6296.101.23.24.3.2.10 | INTEGER (1..8196) | read-write | current |
| sleGponCfmMepControlPriVlanid OBJECT-TYPE The MEP's Vlan ID | 1.3.6.1.4.1.6296.101.23.24.3.2.11 | INTEGER (1..4095) | read-write | current |
| sleGponCfmMepControlPeerMepid OBJECT-TYPE The MEP's peer identity in th MA. | 1.3.6.1.4.1.6296.101.23.24.3.2.12 | INTEGER (1..8196) | read-write | current |
| sleGponCfmMepControlMaKey OBJECT-TYPE The maintenance association Index. | 1.3.6.1.4.1.6296.101.23.24.3.2.13 | Integer32 | read-write | current |
| sleGponCfmMepControlCcm OBJECT-TYPE MEP generates continuity check messages. | 1.3.6.1.4.1.6296.101.23.24.3.2.14 | INTEGER {enable(1), disable(2)} | read-write | current |
| sleGponCfmMepNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.24.3.3 | |||
| sleGponCfmMip OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.24.4 | |||
| sleGponCfmMipTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.24.4.1 | not-accessible | current | |
| sleGponCfmMipEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.24.4.1.1 | not-accessible | current | |
| sleGponCfmMipLevel OBJECT-TYPE The CFM MIP Level. | 1.3.6.1.4.1.6296.101.23.24.4.1.1.1 | INTEGER (0..7) | read-only | current |
| sleGponCfmMipVlan OBJECT-TYPE The CFM MIP VID list. | 1.3.6.1.4.1.6296.101.23.24.4.1.1.2 | OCTET STRING | read-only | current |
| sleGponCfmMipControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.24.4.2 | |||
| sleGponCfmMipControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.24.4.2.1 | INTEGER {setCfmMip(1), delCfmMip(2)} | read-write | current |
| sleGponCfmMipControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.24.4.2.2 | SleControlStatusType | read-only | current |
| sleGponCfmMipControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.24.4.2.3 | Gauge32 | read-write | current |
| sleGponCfmMipControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.24.4.2.4 | TimeTicks | read-only | current |
| sleGponCfmMipControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.24.4.2.5 | SleControlRequestResultType | read-only | current |
| sleGponCfmMipControlOltId OBJECT-TYPE Gpon Olt Index | 1.3.6.1.4.1.6296.101.23.24.4.2.6 | Integer32 (1..2147483647) | read-write | current |
| sleGponCfmMipControlOnuId OBJECT-TYPE Gpon Onu Index | 1.3.6.1.4.1.6296.101.23.24.4.2.7 | Integer32 | read-write | current |
| sleGponCfmMipControlLevel OBJECT-TYPE The CFM MIP Level. | 1.3.6.1.4.1.6296.101.23.24.4.2.8 | INTEGER (0..7) | read-write | current |
| sleGponCfmMipControlVlan OBJECT-TYPE The CFM MIP VID list. | 1.3.6.1.4.1.6296.101.23.24.4.2.9 | OCTET STRING | read-write | current |
| sleGponCfmMipNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.24.4.3 | |||
| sleGponCfmTest OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.24.5 | |||
| sleGponCfmTestLbResultTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.24.5.1 | not-accessible | current | |
| sleGponCfmTestLbResultEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.24.5.1.1 | not-accessible | current | |
| sleGponCfmTestLbResultSlotType OBJECT-TYPE The slot Type | 1.3.6.1.4.1.6296.101.23.24.5.1.1.1 | INTEGER {ethernet(1), iphost(2), ces(3), virtualEthernet(4), mapper(5), gem(6), bridgeAni(7)} | read-only | current |
| sleGponCfmTestLbResultPortIndex OBJECT-TYPE The port index. | 1.3.6.1.4.1.6296.101.23.24.5.1.1.2 | Integer32 (0..65535) | read-only | current |
| sleGponCfmTestLbResultMepId OBJECT-TYPE This attribute specifies the MEP's own identity in the MA. For a given MA, the MEP ID must be unique throughout the network defined by the MD. The MEP ID is defined in the range 1..8191. | 1.3.6.1.4.1.6296.101.23.24.5.1.1.3 | INTEGER (1..8196) | read-only | current |
| sleGponCfmTestLbResultRate OBJECT-TYPE Loopback Success rate | 1.3.6.1.4.1.6296.101.23.24.5.1.1.4 | Integer32 | read-only | current |
| sleGponCfmTestLbResultAvg OBJECT-TYPE The average round trip time of Loopback message | 1.3.6.1.4.1.6296.101.23.24.5.1.1.5 | Integer32 | read-only | current |
| sleGponCfmTestLbResultValidCount OBJECT-TYPE Loopback Success counter. | 1.3.6.1.4.1.6296.101.23.24.5.1.1.6 | Integer32 | read-only | current |
| sleGponCfmTestTrResultTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.24.5.2 | not-accessible | current | |
| sleGponCfmTestTrResultEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.24.5.2.1 | not-accessible | current | |
| sleGponCfmTestTrResultSlotType OBJECT-TYPE The slot Type | 1.3.6.1.4.1.6296.101.23.24.5.2.1.1 | INTEGER {ethernet(1), iphost(2), ces(3), virtualEthernet(4), mapper(5), gem(6), bridgeAni(7)} | read-only | current |
| sleGponCfmTestTrResultPortIndex OBJECT-TYPE The port index. | 1.3.6.1.4.1.6296.101.23.24.5.2.1.2 | Integer32 (0..65535) | read-only | current |
| sleGponCfmTestTrResultMepId OBJECT-TYPE This attribute specifies the MEP's own identity in the MA. For a given MA, the MEP ID must be unique throughout the network defined by the MD. The MEP ID is defined in the range 1..8191. | 1.3.6.1.4.1.6296.101.23.24.5.2.1.3 | INTEGER (1..8196) | read-only | current |
| sleGponCfmTestTrResultReceiveOrder OBJECT-TYPE Indicates an index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value | 1.3.6.1.4.1.6296.101.23.24.5.2.1.4 | Integer32 (0..65535) | read-only | current |
| sleGponCfmTestTrResultInfo OBJECT-TYPE The result of trace route | 1.3.6.1.4.1.6296.101.23.24.5.2.1.5 | OCTET STRING | read-only | current |
| sleGponCfmTestControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.24.5.3 | |||
| sleGponCfmTestControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.24.5.3.1 | INTEGER {setLoopback(1), setTraceRoute(2)} | read-write | current |
| sleGponCfmTestControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.24.5.3.2 | SleControlStatusType | read-only | current |
| sleGponCfmTestControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.24.5.3.3 | Gauge32 | read-write | current |
| sleGponCfmTestControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.24.5.3.4 | TimeTicks | read-only | current |
| sleGponCfmTestControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.24.5.3.5 | SleControlRequestResultType | read-only | current |
| sleGponCfmTestControlOltId OBJECT-TYPE Gpon Olt Index | 1.3.6.1.4.1.6296.101.23.24.5.3.6 | Integer32 (1..2147483647) | read-write | current |
| sleGponCfmTestControlOnuId OBJECT-TYPE Gpon Onu Index | 1.3.6.1.4.1.6296.101.23.24.5.3.7 | Integer32 | read-write | current |
| sleGponCfmTestControlSlotType OBJECT-TYPE The slot Type | 1.3.6.1.4.1.6296.101.23.24.5.3.8 | INTEGER {ethernet(1), iphost(2), ces(3), virtualEthernet(4), mapper(5), gem(6), bridgeAni(7)} | read-write | current |
| sleGponCfmTestControlPortindex OBJECT-TYPE The port index. | 1.3.6.1.4.1.6296.101.23.24.5.3.9 | Integer32 | read-write | current |
| sleGponCfmTestControlMepid OBJECT-TYPE This attribute specifies the MEP's own identity in the MA. For a given MA, the MEP ID must be unique throughout the network defined by the MD. The MEP ID is defined in the range 1..8191. | 1.3.6.1.4.1.6296.101.23.24.5.3.10 | INTEGER (1..8196) | read-write | current |
| sleGponCfmTestControlRmepid OBJECT-TYPE Remote MepId | 1.3.6.1.4.1.6296.101.23.24.5.3.11 | INTEGER (1..8196) | read-write | current |
| sleGponCfmTestControlRmac OBJECT-TYPE Target Mac address | 1.3.6.1.4.1.6296.101.23.24.5.3.12 | OCTET STRING | read-write | current |
| sleGponCfmTestControlCount OBJECT-TYPE The number of Loopback messages to be transmitted | 1.3.6.1.4.1.6296.101.23.24.5.3.13 | Integer32 | read-write | current |
| sleGponCfmTestControlPriority OBJECT-TYPE Priority. 3 bit value to be used in the VLAN tag | 1.3.6.1.4.1.6296.101.23.24.5.3.14 | INTEGER (0..7) | read-write | current |
| sleGponCfmTestControlLength OBJECT-TYPE Indicates the length of Data TLV | 1.3.6.1.4.1.6296.101.23.24.5.3.15 | INTEGER (5..1480) | read-write | current |
| sleGponCfmTestControlTtl OBJECT-TYPE Indicates the length of Data TLV | 1.3.6.1.4.1.6296.101.23.24.5.3.16 | INTEGER (1..64) | read-write | current |
| sleGponCfmTestNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.24.5.4 | |||
| sleGponCfmRmep OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.24.6 | |||
| sleGponCfmRmepTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.24.6.1 | not-accessible | current | |
| sleGponCfmRmepEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.24.6.1.1 | not-accessible | current | |
| sleGponCfmRmepSlotType OBJECT-TYPE The slot Type | 1.3.6.1.4.1.6296.101.23.24.6.1.1.1 | INTEGER {ethernet(1), iphost(2), ces(3), virtualEthernet(4), mapper(5), gem(6), bridgeAni(7)} | read-only | current |
| sleGponCfmRmepPortIndex OBJECT-TYPE The port index. | 1.3.6.1.4.1.6296.101.23.24.6.1.1.2 | Integer32 | read-only | current |
| sleGponCfmRmepMepId OBJECT-TYPE This attribute specifies the MEP's own identity in the MA. For a given MA, the MEP ID must be unique throughout the network defined by the MD. The MEP ID is defined in the range 1..8191. | 1.3.6.1.4.1.6296.101.23.24.6.1.1.3 | INTEGER (1..8196) | read-only | current |
| sleGponCfmRmepIndex OBJECT-TYPE The Remote mep index | 1.3.6.1.4.1.6296.101.23.24.6.1.1.4 | INTEGER (1..8191) | read-only | current |
| sleGponCfmRmepRmepId OBJECT-TYPE Remote Mepid | 1.3.6.1.4.1.6296.101.23.24.6.1.1.5 | INTEGER (1..8196) | read-only | current |
| sleGponCfmRmepRmac OBJECT-TYPE Mac address. | 1.3.6.1.4.1.6296.101.23.24.6.1.1.6 | OCTET STRING | read-only | current |
| sleGponCfmRmepState OBJECT-TYPE Indicates the operational state of the remote MEP State machines | 1.3.6.1.4.1.6296.101.23.24.6.1.1.7 | INTEGER {idle(1), start(2), failed(3), ok(4)} | read-only | current |
| sleGponCfmRmepControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.24.6.2 | |||
| sleGponCfmRmepControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.24.6.2.1 | INTEGER {updateRmepInfo(1)} | read-write | current |
| sleGponCfmRmepControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.24.6.2.2 | SleControlStatusType | read-only | current |
| sleGponCfmRmepControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.24.6.2.3 | Gauge32 | read-write | current |
| sleGponCfmRmepControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.24.6.2.4 | TimeTicks | read-only | current |
| sleGponCfmRmepControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.24.6.2.5 | SleControlRequestResultType | read-only | current |
| sleGponCfmRmepControlOltId OBJECT-TYPE Gpon Olt Index | 1.3.6.1.4.1.6296.101.23.24.6.2.6 | Integer32 (1..2147483647) | read-write | current |
| sleGponCfmRmepControlOnuId OBJECT-TYPE Gpon Onu Index | 1.3.6.1.4.1.6296.101.23.24.6.2.7 | Integer32 | read-write | current |
| sleGponCfmRmepControlSlotType OBJECT-TYPE The slot Type | 1.3.6.1.4.1.6296.101.23.24.6.2.8 | INTEGER {ethernet(1), iphost(2), ces(3), virtualEthernet(4), mapper(5), gem(6), bridgeAni(7)} | read-write | current |
| sleGponCfmRmepControlPortindex OBJECT-TYPE The port index. | 1.3.6.1.4.1.6296.101.23.24.6.2.9 | Integer32 | read-write | current |
| sleGponCfmRmepControlMepid OBJECT-TYPE This attribute specifies the MEP's own identity in the MA. For a given MA, the MEP ID must be unique throughout the network defined by the MD. The MEP ID is defined in the range 1..8191. | 1.3.6.1.4.1.6296.101.23.24.6.2.10 | INTEGER (1..8196) | read-write | current |
| copyOfsleGponCfmMepNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.24.6.3 | |||
| sleGponOnuGsp OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.25 | |||
| sleGponOnuGspTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.25.1 | not-accessible | current | |
| sleGponOnuGspEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.25.1.1 | not-accessible | current | |
| sleGponOnuGspType OBJECT-TYPE SP(Generic status portal) Table Type 1: GSP(Generic status portal) Status document table 2: GSP(Generic status portal) Configuration document table | 1.3.6.1.4.1.6296.101.23.25.1.1.1 | INTEGER {gspStatusDocTable(1), gspConfDocTable(2)} | read-only | current |
| sleGponOnuGspIndex OBJECT-TYPE GSP(Generic status portal) document table Index Each Index means 1KB data. | 1.3.6.1.4.1.6296.101.23.25.1.1.2 | Integer32 (1..65535) | read-only | current |
| sleGponOnuGspData OBJECT-TYPE GSP(Generic status portal) document table | 1.3.6.1.4.1.6296.101.23.25.1.1.3 | OCTET STRING | read-only | current |
| sleGponOnuGspControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.25.2 | |||
| sleGponOnuGspControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.25.2.1 | INTEGER {updateOnuGspInfo(1)} | read-write | current |
| sleGponOnuGspControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.25.2.2 | SleControlStatusType | read-only | current |
| sleGponOnuGspControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.25.2.3 | Gauge32 | read-write | current |
| sleGponOnuGspControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.25.2.4 | TimeTicks | read-only | current |
| sleGponOnuGspControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.25.2.5 | SleControlRequestResultType | read-only | current |
| sleGponOnuGspControlOltId OBJECT-TYPE Gpon Olt Index | 1.3.6.1.4.1.6296.101.23.25.2.6 | Integer32 (1..2147483647) | read-write | current |
| sleGponOnuGspControlOnuId OBJECT-TYPE Gpon Onu Index (OxFF is all onu) | 1.3.6.1.4.1.6296.101.23.25.2.7 | Integer32 | read-write | current |
| sleGponOnuGspControlType OBJECT-TYPE GSP(Generic status portal) Table Type | 1.3.6.1.4.1.6296.101.23.25.2.8 | INTEGER {gspStatusDocTable(1), gspConfDocTable(2)} | read-write | current |
| sleGponOnuGspNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.25.3 | |||
| sleGponProfile2 OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51 | |||
| sleGponProfile2Dba OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.1 | |||
| sleGponProfile2DbaTable OBJECT-TYPE sleGponProfile2DbaTable | 1.3.6.1.4.1.6296.101.23.51.1.1 | not-accessible | current | |
| sleGponProfile2DbaEntry OBJECT-TYPE key: sleGponProfile2DbaIndex | 1.3.6.1.4.1.6296.101.23.51.1.1.1 | not-accessible | current | |
| sleGponProfile2DbaIndex OBJECT-TYPE The DBA profile index. | 1.3.6.1.4.1.6296.101.23.51.1.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2DbaName OBJECT-TYPE The DBA profile name. | 1.3.6.1.4.1.6296.101.23.51.1.1.1.2 | OCTET STRING | read-only | current |
| sleGponProfile2DbaMode OBJECT-TYPE The SLA mode. | 1.3.6.1.4.1.6296.101.23.51.1.1.1.3 | INTEGER {sr(1), nsr(2), fixedUbr(3), fixedCbr(4)} | read-only | current |
| sleGponProfile2DbaSlaAssured OBJECT-TYPE The SLA Assured bandwidth | 1.3.6.1.4.1.6296.101.23.51.1.1.1.4 | Integer32 | read-only | current |
| sleGponProfile2DbaSlaFixed OBJECT-TYPE The SLA fixed bandwidth | 1.3.6.1.4.1.6296.101.23.51.1.1.1.5 | Integer32 | read-only | current |
| sleGponProfile2DbaSlaMax OBJECT-TYPE The SLA maximum bandwidth | 1.3.6.1.4.1.6296.101.23.51.1.1.1.6 | Integer32 | read-only | current |
| sleGponProfile2DbaSlaMaxFlags OBJECT-TYPE The SLA maximum Flags | 1.3.6.1.4.1.6296.101.23.51.1.1.1.7 | INTEGER {nonAssured(1), bestEffort(2), unknown(255)} | read-write | current |
| sleGponProfile2DbaControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.1.2 | |||
| sleGponProfile2DbaControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.1.2.1 | INTEGER {addDbaProfile(1), delDbaProfile(2), setDbaSla(3)} | read-write | current |
| sleGponProfile2DbaControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.1.2.2 | SleControlStatusType | read-write | current |
| sleGponProfile2DbaControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.1.2.3 | Gauge32 | read-write | current |
| sleGponProfile2DbaControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.1.2.4 | TimeTicks | read-write | current |
| sleGponProfile2DbaControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.1.2.5 | SleControlRequestResultType | read-write | current |
| sleGponProfile2DbaControlName OBJECT-TYPE The DBA profile name. | 1.3.6.1.4.1.6296.101.23.51.1.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2DbaControlMode OBJECT-TYPE The SLA mode. | 1.3.6.1.4.1.6296.101.23.51.1.2.7 | INTEGER {sr(1), nsr(2), fixedUbr(3), fixedCbr(4)} | read-write | current |
| sleGponProfile2DbaControlSlaAssured OBJECT-TYPE The SLA Assured bandwidth | 1.3.6.1.4.1.6296.101.23.51.1.2.8 | Integer32 | read-write | current |
| sleGponProfile2DbaControlSlaFixed OBJECT-TYPE The SLA fixed bandwidth | 1.3.6.1.4.1.6296.101.23.51.1.2.9 | Integer32 | read-write | current |
| sleGponProfile2DbaControlSlaMax OBJECT-TYPE The SLA maximum bandwidth | 1.3.6.1.4.1.6296.101.23.51.1.2.10 | Integer32 | read-write | current |
| sleGponProfile2DbaControlSlaMaxFlags OBJECT-TYPE The SLA maximum Flags | 1.3.6.1.4.1.6296.101.23.51.1.2.11 | INTEGER {nonAssured(1), bestEffort(2), unknown(255)} | read-write | current |
| sleGponProfile2DbaNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.1.3 | |||
| sleGponProfile2Traffic OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.2 | |||
| sleGponProfile2TrafficTable OBJECT-TYPE sleGponProfile2TrafficTable | 1.3.6.1.4.1.6296.101.23.51.2.1 | not-accessible | current | |
| sleGponProfile2TrafficEntry OBJECT-TYPE key: sleGponProfile2TrafficIndex | 1.3.6.1.4.1.6296.101.23.51.2.1.1 | not-accessible | current | |
| sleGponProfile2TrafficIndex OBJECT-TYPE The traffic profile index | 1.3.6.1.4.1.6296.101.23.51.2.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2TrafficName OBJECT-TYPE The traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.2.1.1.2 | OCTET STRING | read-only | current |
| sleGponProfile2TrafficControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.2.2 | |||
| sleGponProfile2TrafficControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.2.2.1 | INTEGER {addTrafficProfile(1), delTrafficProfile(2)} | read-write | current |
| sleGponProfile2TrafficControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.2.2.2 | SleControlStatusType | read-write | current |
| sleGponProfile2TrafficControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.2.2.3 | Gauge32 | read-write | current |
| sleGponProfile2TrafficControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.2.2.4 | TimeTicks | read-write | current |
| sleGponProfile2TrafficControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.2.2.5 | SleControlRequestResultType | read-write | current |
| sleGponProfile2TrafficControlName OBJECT-TYPE The Traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.2.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2TrafficNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.2.3 | |||
| sleGponProfile2Mapper OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.3 | |||
| sleGponProfile2MapperTable OBJECT-TYPE sleGponProfile2MapperTable | 1.3.6.1.4.1.6296.101.23.51.3.1 | not-accessible | current | |
| sleGponProfile2MapperEntry OBJECT-TYPE key: sleGponProfile2TrafficIndex, sleGponProfile2MapperId | 1.3.6.1.4.1.6296.101.23.51.3.1.1 | not-accessible | current | |
| sleGponProfile2MapperId OBJECT-TYPE The mapper ID. | 1.3.6.1.4.1.6296.101.23.51.3.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2MapperGemportCount OBJECT-TYPE The mapper gemport count (1|2|4|8) | 1.3.6.1.4.1.6296.101.23.51.3.1.1.2 | Integer32 | read-only | current |
| sleGponProfile2MapperDefaultCoS OBJECT-TYPE The mapper default CoS. | 1.3.6.1.4.1.6296.101.23.51.3.1.1.3 | Integer32 | read-only | current |
| sleGponProfile2MapperDscp2Pbit OBJECT-TYPE The DSCP to P bit marking | 1.3.6.1.4.1.6296.101.23.51.3.1.1.4 | EnableFlag | read-only | current |
| sleGponProfile2MapperCos0 OBJECT-TYPE COS to GEM port mapping configuration (Cos0) | 1.3.6.1.4.1.6296.101.23.51.3.1.1.5 | Integer32 | read-only | current |
| sleGponProfile2MapperCos1 OBJECT-TYPE COS to GEM port mapping configuration (Cos1) | 1.3.6.1.4.1.6296.101.23.51.3.1.1.6 | Integer32 | read-only | current |
| sleGponProfile2MapperCos2 OBJECT-TYPE COS to GEM port mapping configuration (Cos2) | 1.3.6.1.4.1.6296.101.23.51.3.1.1.7 | Integer32 | read-only | current |
| sleGponProfile2MapperCos3 OBJECT-TYPE COS to GEM port mapping configuration (Cos3) | 1.3.6.1.4.1.6296.101.23.51.3.1.1.8 | Integer32 | read-only | current |
| sleGponProfile2MapperCos4 OBJECT-TYPE COS to GEM port mapping configuration (Cos4) | 1.3.6.1.4.1.6296.101.23.51.3.1.1.9 | Integer32 | read-only | current |
| sleGponProfile2MapperCos5 OBJECT-TYPE COS to GEM port mapping configuration (Cos5) | 1.3.6.1.4.1.6296.101.23.51.3.1.1.10 | Integer32 | read-only | current |
| sleGponProfile2MapperCos6 OBJECT-TYPE COS to GEM port mapping configuration (Cos6) | 1.3.6.1.4.1.6296.101.23.51.3.1.1.11 | Integer32 | read-only | current |
| sleGponProfile2MapperCos7 OBJECT-TYPE COS to GEM port mapping configuration (Cos7) | 1.3.6.1.4.1.6296.101.23.51.3.1.1.12 | Integer32 | read-only | current |
| sleGponProfile2MapperActiveEth OBJECT-TYPE The Active Ethernet type. | 1.3.6.1.4.1.6296.101.23.51.3.1.1.13 | INTEGER {normalMapper(0), activeEthMapper(1)} | read-only | current |
| sleGponProfile2MapperControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.3.2 | |||
| sleGponProfile2MapperControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.3.2.1 | INTEGER {addMapper(1), delMapper(2), setGemportCount(3), setDefaultCos(4), setDscp2Bit(5), setCosGemport(6), addActiveEthMapper(7), delActiveEthMapper(8)} | read-write | current |
| sleGponProfile2MapperControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.3.2.2 | SleControlStatusType | read-write | current |
| sleGponProfile2MapperControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.3.2.3 | Gauge32 | read-write | current |
| sleGponProfile2MapperControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.3.2.4 | TimeTicks | read-write | current |
| sleGponProfile2MapperControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.3.2.5 | SleControlRequestResultType | read-write | current |
| sleGponProfile2MapperControlTName OBJECT-TYPE The Traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.3.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2MapperControlId OBJECT-TYPE The mapper ID. | 1.3.6.1.4.1.6296.101.23.51.3.2.7 | Integer32 | read-write | current |
| sleGponProfile2MapperControlGemportCount OBJECT-TYPE The mapper gemport count (1|2|4|8) | 1.3.6.1.4.1.6296.101.23.51.3.2.8 | Integer32 | read-write | current |
| sleGponProfile2MapperControlDefaultCoS OBJECT-TYPE The mapper default CoS. | 1.3.6.1.4.1.6296.101.23.51.3.2.9 | Integer32 | read-write | current |
| sleGponProfile2MapperControlDscp2Pbit OBJECT-TYPE The DSCP to P bit marking | 1.3.6.1.4.1.6296.101.23.51.3.2.10 | EnableFlag | read-write | current |
| sleGponProfile2MapperControlCosIndex OBJECT-TYPE The CoS Index. | 1.3.6.1.4.1.6296.101.23.51.3.2.11 | INTEGER {cos0(1), cos1(2), cos2(3), cos3(4), cos4(5), cos5(6), cos6(7), cos7(8)} | read-write | current |
| sleGponProfile2MapperControlCosGemport OBJECT-TYPE The gemport number. | 1.3.6.1.4.1.6296.101.23.51.3.2.12 | Integer32 | read-write | current |
| sleGponProfile2MapperNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.3.3 | |||
| sleGponProfile2Bridge OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.4 | |||
| sleGponProfile2BridgeTable OBJECT-TYPE sleGponProfile2BridgeTable | 1.3.6.1.4.1.6296.101.23.51.4.1 | not-accessible | current | |
| sleGponProfile2BridgeEntry OBJECT-TYPE key: sleGponProfile2TrafficIndex, sleGponProfile2BridgeId | 1.3.6.1.4.1.6296.101.23.51.4.1.1 | not-accessible | current | |
| sleGponProfile2BridgeId OBJECT-TYPE The Bridge ID. | 1.3.6.1.4.1.6296.101.23.51.4.1.1.1 | Integer32 (1..4094) | read-only | current |
| sleGponProfile2BridgeMacLearning OBJECT-TYPE The Bridge mac learning. | 1.3.6.1.4.1.6296.101.23.51.4.1.1.2 | EnableFlag | read-only | current |
| sleGponProfile2BridgeMaxHost OBJECT-TYPE The Bridge max host. | 1.3.6.1.4.1.6296.101.23.51.4.1.1.3 | Integer32 (0..255) | read-only | current |
| sleGponProfile2BridgeMcastFlag OBJECT-TYPE The Mcast supporting. | 1.3.6.1.4.1.6296.101.23.51.4.1.1.4 | EnableFlag | read-only | current |
| sleGponProfile2BridgePortBridge OBJECT-TYPE The Port bridge. | 1.3.6.1.4.1.6296.101.23.51.4.1.1.5 | EnableFlag | read-only | current |
| sleGponProfile2BridgeControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.4.2 | |||
| sleGponProfile2BridgeControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.4.2.1 | INTEGER {addBridge(1), delBridge(2), setMacLearning(3), setMaxHost(4), setMcast(5), setPortBridge(6)} | read-write | current |
| sleGponProfile2BridgeControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.4.2.2 | SleControlStatusType | read-write | current |
| sleGponProfile2BridgeControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.4.2.3 | Gauge32 | read-write | current |
| sleGponProfile2BridgeControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.4.2.4 | TimeTicks | read-write | current |
| sleGponProfile2BridgeControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.4.2.5 | SleControlRequestResultType | read-write | current |
| sleGponProfile2BridgeControlTName OBJECT-TYPE The Traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.4.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2BridgeControlId OBJECT-TYPE The bridge ID. | 1.3.6.1.4.1.6296.101.23.51.4.2.7 | Integer32 | read-write | current |
| sleGponProfile2BridgeControlMacLearning OBJECT-TYPE The Bridge mac learning. | 1.3.6.1.4.1.6296.101.23.51.4.2.8 | EnableFlag | read-write | current |
| sleGponProfile2BridgeControlMaxHost OBJECT-TYPE The Bridge max host. | 1.3.6.1.4.1.6296.101.23.51.4.2.9 | Integer32 | read-write | current |
| sleGponProfile2BridgeControlMcastFlag OBJECT-TYPE The Mcast supporting. | 1.3.6.1.4.1.6296.101.23.51.4.2.10 | EnableFlag | read-write | current |
| sleGponProfile2BridgeControlPortBridge OBJECT-TYPE The Mcast supporting. | 1.3.6.1.4.1.6296.101.23.51.4.2.11 | EnableFlag | read-write | current |
| sleGponProfile2BridgeNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.4.3 | |||
| sleGponProfile2BridgeAni OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.5 | |||
| sleGponProfile2BridgeAniTable OBJECT-TYPE sleGponProfile2BridgeAniTable | 1.3.6.1.4.1.6296.101.23.51.5.1 | not-accessible | current | |
| sleGponProfile2BridgeAniEntry OBJECT-TYPE key: sleGponProfile2TrafficIndex, sleGponProfile2BridgeId, sleGponProfile2BridgeAniId | 1.3.6.1.4.1.6296.101.23.51.5.1.1 | not-accessible | current | |
| sleGponProfile2BridgeAniId OBJECT-TYPE The Bridge ani mapper-ID. | 1.3.6.1.4.1.6296.101.23.51.5.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2BridgeAniVlanFilterMode OBJECT-TYPE Allow or deny that untagged fowarding operation | 1.3.6.1.4.1.6296.101.23.51.5.1.1.2 | INTEGER {allow(1), deny(2)} | read-only | current |
| sleGponProfile2BridgeAniVlanFilter OBJECT-TYPE The vlan-filter VID list. | 1.3.6.1.4.1.6296.101.23.51.5.1.1.3 | OCTET STRING | read-only | current |
| sleGponProfile2BridgeAniMacFilterPreassign OBJECT-TYPE MAC Filter Preassign Table 0 -> forward 1 -> filter | 1.3.6.1.4.1.6296.101.23.51.5.1.1.4 | Bits {ipv4Multicast(0), ipv6Multicast(1), ipv4Broadcast(2), rarp(3), ipx(4), netBEUI(5), appleTalk(6), bridgeManagementInformation(7), arp(8), pppoeBroadcast(9)} | read-only | current |
| sleGponProfile2BridgeAniControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.5.2 | |||
| sleGponProfile2BridgeAniControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.5.2.1 | INTEGER {addBridgeAni(1), delBridgeAni(2), setVlanFilter(3), setAniMacFilterPreassign(4)} | read-write | current |
| sleGponProfile2BridgeAniControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.5.2.2 | SleControlStatusType | read-write | current |
| sleGponProfile2BridgeAniControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.5.2.3 | Gauge32 | read-write | current |
| sleGponProfile2BridgeAniControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.5.2.4 | TimeTicks | read-write | current |
| sleGponProfile2BridgeAniControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.5.2.5 | SleControlRequestResultType | read-write | current |
| sleGponProfile2BridgeAniControlTName OBJECT-TYPE The Traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.5.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2BridgeAniControlBridgeId OBJECT-TYPE The bridge ID. | 1.3.6.1.4.1.6296.101.23.51.5.2.7 | Integer32 | read-write | current |
| sleGponProfile2BridgeAniControlId OBJECT-TYPE The bridge Ani ID. | 1.3.6.1.4.1.6296.101.23.51.5.2.8 | Integer32 | read-write | current |
| sleGponProfile2BridgeAniControlVlanFilterMode OBJECT-TYPE Allow or deny that untagged fowarding operation | 1.3.6.1.4.1.6296.101.23.51.5.2.9 | INTEGER {allow(1), deny(2)} | read-write | current |
| sleGponProfile2BridgeAniControlVlanFilter OBJECT-TYPE The vlan-filter VID list. | 1.3.6.1.4.1.6296.101.23.51.5.2.10 | OCTET STRING | read-write | current |
| sleGponProfile2BridgeAniControlMacFilterPreassign OBJECT-TYPE MAC Filter Preassign Table 0 -> forward 1 -> filter | 1.3.6.1.4.1.6296.101.23.51.5.2.11 | Bits {ipv4Multicast(0), ipv6Multicast(1), ipv4Broadcast(2), rarp(3), ipx(4), netBEUI(5), appleTalk(6), bridgeManagementInformation(7), arp(8), pppoeBroadcast(9)} | read-write | current |
| sleGponProfile2BridgeAniNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.5.3 | |||
| sleGponProfile2BridgeUni OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.6 | |||
| sleGponProfile2BridgeUniTable OBJECT-TYPE sleGponProfile2BridgeUniTable | 1.3.6.1.4.1.6296.101.23.51.6.1 | not-accessible | current | |
| sleGponProfile2BridgeUniEntry OBJECT-TYPE key: sleGponProfile2TrafficIndex, sleGponProfile2BridgeId, sleGponProfile2BridgeUniType, sleGponProfile2BridgeUniId | 1.3.6.1.4.1.6296.101.23.51.6.1.1 | not-accessible | current | |
| sleGponProfile2BridgeUniType OBJECT-TYPE The Bridge Uni Type. | 1.3.6.1.4.1.6296.101.23.51.6.1.1.1 | INTEGER {eth(1), voip(2), virtualEth(3)} | read-only | current |
| sleGponProfile2BridgeUniId OBJECT-TYPE The Bridge Uni mapper-ID. | 1.3.6.1.4.1.6296.101.23.51.6.1.1.2 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2BridgeUniVlanOpDsOperFlag OBJECT-TYPE The VLAN Tagging Operation Data & DS VLAN Tagging Operation mode | 1.3.6.1.4.1.6296.101.23.51.6.1.1.3 | INTEGER {unused(0), keep(1), remove(2)} | read-only | current |
| sleGponProfile2BridgeUniVlanOpUsOperFlag OBJECT-TYPE The VLAN Tagging Operation Data & US VLAN Tagging Operation mode | 1.3.6.1.4.1.6296.101.23.51.6.1.1.4 | INTEGER {unused(0), keep(1), overwrite(2), add(3)} | read-only | current |
| sleGponProfile2BridgeUniVlanOpUsOperVid OBJECT-TYPE The US Oper Vid. | 1.3.6.1.4.1.6296.101.23.51.6.1.1.5 | Integer32 | read-only | current |
| sleGponProfile2BridgeUniVlanOpUsOperCos OBJECT-TYPE The US Oper tag CoS value | 1.3.6.1.4.1.6296.101.23.51.6.1.1.6 | Integer32 | read-only | current |
| sleGponProfile2BridgeUniPortAdmin OBJECT-TYPE The port admin status | 1.3.6.1.4.1.6296.101.23.51.6.1.1.7 | EnableFlag | read-only | current |
| sleGponProfile2BridgeUniRateLimitDownSir OBJECT-TYPE The download rate-limit control : SIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.6.1.1.8 | Integer32 | read-only | current |
| sleGponProfile2BridgeUniRateLimitDownPir OBJECT-TYPE The download rate-limit control : PIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.6.1.1.9 | Integer32 | read-only | current |
| sleGponProfile2BridgeUniRateLimitUpSir OBJECT-TYPE The upload rate-limit control : SIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.6.1.1.10 | Integer32 | read-only | current |
| sleGponProfile2BridgeUniRateLimitUpPir OBJECT-TYPE The upload rate-limit control : SIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.6.1.1.11 | Integer32 | read-only | current |
| sleGponProfile2BridgeUniIgmpMaxGroup OBJECT-TYPE The IGMP max group | 1.3.6.1.4.1.6296.101.23.51.6.1.1.12 | Integer32 | read-only | current |
| sleGponProfile2BridgeUniMaxFrame OBJECT-TYPE The max-frame | 1.3.6.1.4.1.6296.101.23.51.6.1.1.13 | Integer32 | read-only | current |
| sleGponProfile2BridgeUniMcastProfile OBJECT-TYPE The multicast profile name | 1.3.6.1.4.1.6296.101.23.51.6.1.1.14 | OCTET STRING | read-only | current |
| sleGponProfile2BridgeUniVlanFilterMode OBJECT-TYPE Allow or deny that untagged fowarding operation | 1.3.6.1.4.1.6296.101.23.51.6.1.1.15 | INTEGER {allow(1), deny(2)} | read-only | current |
| sleGponProfile2BridgeUniVlanFilter OBJECT-TYPE The vlan-filter VID list. | 1.3.6.1.4.1.6296.101.23.51.6.1.1.16 | OCTET STRING | read-only | current |
| sleGponProfile2BridgeUniIpMode OBJECT-TYPE The UNI IP mode. | 1.3.6.1.4.1.6296.101.23.51.6.1.1.17 | INTEGER {static(1), dhcp(2), none(3)} | read-only | current |
| sleGponProfile2BridgeUniDns1 OBJECT-TYPE The DNS address 1. | 1.3.6.1.4.1.6296.101.23.51.6.1.1.18 | IpAddress | read-only | current |
| sleGponProfile2BridgeUniDns2 OBJECT-TYPE The DNS address 2. | 1.3.6.1.4.1.6296.101.23.51.6.1.1.19 | IpAddress | read-only | current |
| sleGponProfile2BridgeUniVoIPProfile OBJECT-TYPE The VoIP profile name. | 1.3.6.1.4.1.6296.101.23.51.6.1.1.20 | OCTET STRING | read-only | current |
| sleGponProfile2BridgeUniMaxHost OBJECT-TYPE The UNI max host. | 1.3.6.1.4.1.6296.101.23.51.6.1.1.21 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2BridgeUniExtVlanName OBJECT-TYPE The Extended vlan name. | 1.3.6.1.4.1.6296.101.23.51.6.1.1.22 | OCTET STRING | read-only | current |
| sleGponProfile2BridgeUniMcastRateLimit OBJECT-TYPE The multicast rate-limit bandwidth (Bandwidth in steps of 8Kbps), 0 is disable | 1.3.6.1.4.1.6296.101.23.51.6.1.1.23 | Integer32 (0..1031616) | read-only | current |
| sleGponProfile2BridgeUniMacFilterPreassign OBJECT-TYPE MAC Filter Preassign Table 0 -> forward 1 -> filter | 1.3.6.1.4.1.6296.101.23.51.6.1.1.24 | Bits {ipv4Multicast(0), ipv6Multicast(1), ipv4Broadcast(2), rarp(3), ipx(4), netBEUI(5), appleTalk(6), bridgeManagementInformation(7), arp(8), pppoeBroadcast(9)} | read-only | current |
| sleGponProfile2BridgeUniRateLimitProfile OBJECT-TYPE The rate-limit profile name. | 1.3.6.1.4.1.6296.101.23.51.6.1.1.25 | OCTET STRING | read-only | current |
| sleGponProfile2BridgeUniIneterDomainName OBJECT-TYPE The virtual ethernet interface domain name | 1.3.6.1.4.1.6296.101.23.51.6.1.1.26 | OCTET STRING | read-only | current |
| sleGponProfile2BridgeUniControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.6.2 | |||
| sleGponProfile2BridgeUniControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.6.2.1 | INTEGER {addBridgeUni(1), delBridgeUni(2), setVlanUsOper(3), setVlanDsOper(4), setPortAdmin(5), setRateLimit(6), setIgmpMaxGroup(7), setMaxFrame(8), setMcastProfile(9), setVlanFilter(10), setIpInfo(11), setVoipProfile(12), setMaxHost(13), setExtendedVlan(14), setMcastRateLimit(15), setUniMacFilterPreassign(16), setUniRateLimitProfile(17), setUniInterDomainName(18)} | read-write | current |
| sleGponProfile2BridgeUniControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.6.2.2 | SleControlStatusType | read-write | current |
| sleGponProfile2BridgeUniControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.6.2.3 | Gauge32 | read-write | current |
| sleGponProfile2BridgeUniControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.6.2.4 | TimeTicks | read-write | current |
| sleGponProfile2BridgeUniControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.6.2.5 | SleControlRequestResultType | read-write | current |
| sleGponProfile2BridgeUniControlTName OBJECT-TYPE The Traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.6.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2BridgeUniControlBridgeId OBJECT-TYPE The bridge ID. | 1.3.6.1.4.1.6296.101.23.51.6.2.7 | Integer32 | read-write | current |
| sleGponProfile2BridgeUniControlType OBJECT-TYPE The Bridge Uni Type. | 1.3.6.1.4.1.6296.101.23.51.6.2.8 | INTEGER {eth(1), voip(2), virtualEth(3)} | read-write | current |
| sleGponProfile2BridgeUniControlId OBJECT-TYPE The bridge Uni ID. | 1.3.6.1.4.1.6296.101.23.51.6.2.9 | Integer32 | read-write | current |
| sleGponProfile2BridgeUniControlVlanOpDsOperFlag OBJECT-TYPE The VLAN Tagging Operation Data & DS VLAN Tagging Operation mode | 1.3.6.1.4.1.6296.101.23.51.6.2.10 | INTEGER {unused(0), keep(1), remove(2)} | read-write | current |
| sleGponProfile2BridgeUniControlVlanOpUsOperFlag OBJECT-TYPE The VLAN Tagging Operation Data & US VLAN Tagging Operation mode | 1.3.6.1.4.1.6296.101.23.51.6.2.11 | INTEGER {unused(0), keep(1), overwrite(2), add(3)} | read-write | current |
| sleGponProfile2BridgeUniControlVlanOpUsOperVid OBJECT-TYPE The US Oper Vid. | 1.3.6.1.4.1.6296.101.23.51.6.2.12 | Integer32 | read-write | current |
| sleGponProfile2BridgeUniControlVlanOpUsOperCos OBJECT-TYPE The US Oper tag CoS value | 1.3.6.1.4.1.6296.101.23.51.6.2.13 | Integer32 | read-write | current |
| sleGponProfile2BridgeUniControlPortAdmin OBJECT-TYPE The port admin status | 1.3.6.1.4.1.6296.101.23.51.6.2.14 | EnableFlag | read-write | current |
| sleGponProfile2BridgeUniControlRateLimitDownSir OBJECT-TYPE The download rate-limit control : SIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.6.2.15 | Integer32 | read-write | current |
| sleGponProfile2BridgeUniControlRateLimitDownPir OBJECT-TYPE The download rate-limit control : PIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.6.2.16 | Integer32 | read-write | current |
| sleGponProfile2BridgeUniControlRateLimitUpSir OBJECT-TYPE The upload rate-limit control : SIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.6.2.17 | Integer32 | read-write | current |
| sleGponProfile2BridgeUniControlRateLimitUpPir OBJECT-TYPE The upload rate-limit control : SIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.6.2.18 | Integer32 | read-write | current |
| sleGponProfile2BridgeUniControlIgmpMaxGroup OBJECT-TYPE The IGMP max group | 1.3.6.1.4.1.6296.101.23.51.6.2.19 | Integer32 | read-write | current |
| sleGponProfile2BridgeUniControlMaxFrame OBJECT-TYPE The max-frame | 1.3.6.1.4.1.6296.101.23.51.6.2.20 | Integer32 | read-write | current |
| sleGponProfile2BridgeUniControlMcastProfile OBJECT-TYPE The multicast profile name | 1.3.6.1.4.1.6296.101.23.51.6.2.21 | OCTET STRING | read-write | current |
| sleGponProfile2BridgeUniControlVlanFilterMode OBJECT-TYPE Allow or deny that untagged fowarding operation | 1.3.6.1.4.1.6296.101.23.51.6.2.22 | INTEGER {allow(1), deny(2)} | read-write | current |
| sleGponProfile2BridgeUniControlVlanFilter OBJECT-TYPE The vlan-filter VID list. | 1.3.6.1.4.1.6296.101.23.51.6.2.23 | OCTET STRING | read-write | current |
| sleGponProfile2BridgeUniControlIpMode OBJECT-TYPE The IP mode. | 1.3.6.1.4.1.6296.101.23.51.6.2.24 | INTEGER {static(1), dhcp(2), none(3)} | read-write | current |
| sleGponProfile2BridgeUniControlDns1 OBJECT-TYPE The DNS address 1. | 1.3.6.1.4.1.6296.101.23.51.6.2.25 | IpAddress | read-write | current |
| sleGponProfile2BridgeUniControlDns2 OBJECT-TYPE The DNS address 2. | 1.3.6.1.4.1.6296.101.23.51.6.2.26 | IpAddress | read-write | current |
| sleGponProfile2BridgeUniControlVoIPProfile OBJECT-TYPE The VoIP profile name. | 1.3.6.1.4.1.6296.101.23.51.6.2.27 | OCTET STRING | read-write | current |
| sleGponProfile2BridgeUniControlMaxHost OBJECT-TYPE The UNI max host. | 1.3.6.1.4.1.6296.101.23.51.6.2.28 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2BridgeUniControlExtVlanName OBJECT-TYPE The Extended vlan name. | 1.3.6.1.4.1.6296.101.23.51.6.2.29 | OCTET STRING | read-write | current |
| sleGponProfile2BridgeUniControlMcastRateLimit OBJECT-TYPE The multicast rate-limit bandwidth (Bandwidth in steps of 8Kbps), 0 is disable | 1.3.6.1.4.1.6296.101.23.51.6.2.30 | Integer32 (0..1031616) | read-write | current |
| sleGponProfile2BridgeUniControlMacFilterPreassign OBJECT-TYPE MAC Filter Preassign Table 0 -> forward 1 -> filter | 1.3.6.1.4.1.6296.101.23.51.6.2.31 | Bits {ipv4Multicast(0), ipv6Multicast(1), ipv4Broadcast(2), rarp(3), ipx(4), netBEUI(5), appleTalk(6), bridgeManagementInformation(7), arp(8), pppoeBroadcast(9)} | read-write | current |
| sleGponProfile2BridgeUniControlRateLimitProfile OBJECT-TYPE The rate-limit profile name. | 1.3.6.1.4.1.6296.101.23.51.6.2.32 | OCTET STRING | read-write | current |
| sleGponProfile2BridgeUniControlInterDomainName OBJECT-TYPE The virtual ethernet interface domain name | 1.3.6.1.4.1.6296.101.23.51.6.2.33 | OCTET STRING | read-write | current |
| sleGponProfile2BridgeUniNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.6.3 | |||
| sleGponProfile2Tcont OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.7 | |||
| sleGponProfile2TcontTable OBJECT-TYPE sleGponProfile2TcontTable | 1.3.6.1.4.1.6296.101.23.51.7.1 | not-accessible | current | |
| sleGponProfile2TcontEntry OBJECT-TYPE key: sleGponProfile2TrafficIndex, sleGponProfile2TcontId | 1.3.6.1.4.1.6296.101.23.51.7.1.1 | not-accessible | current | |
| sleGponProfile2TcontId OBJECT-TYPE The Tcont ID | 1.3.6.1.4.1.6296.101.23.51.7.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2TcontDbaProfile OBJECT-TYPE The DBA profile | 1.3.6.1.4.1.6296.101.23.51.7.1.1.2 | OCTET STRING | read-only | current |
| sleGponProfile2TcontQueue1Weight OBJECT-TYPE The queue weight | 1.3.6.1.4.1.6296.101.23.51.7.1.1.3 | Integer32 (1..255) | read-only | current |
| sleGponProfile2TcontQueue2Weight OBJECT-TYPE The queue weight | 1.3.6.1.4.1.6296.101.23.51.7.1.1.4 | Integer32 (1..255) | read-only | current |
| sleGponProfile2TcontQueue3Weight OBJECT-TYPE The queue weight | 1.3.6.1.4.1.6296.101.23.51.7.1.1.5 | Integer32 (1..255) | read-only | current |
| sleGponProfile2TcontQueue4Weight OBJECT-TYPE The queue weight | 1.3.6.1.4.1.6296.101.23.51.7.1.1.6 | Integer32 (1..255) | read-only | current |
| sleGponProfile2TcontQueue5Weight OBJECT-TYPE The queue weight | 1.3.6.1.4.1.6296.101.23.51.7.1.1.7 | Integer32 (1..255) | read-only | current |
| sleGponProfile2TcontQueue6Weight OBJECT-TYPE The queue weight | 1.3.6.1.4.1.6296.101.23.51.7.1.1.8 | Integer32 (1..255) | read-only | current |
| sleGponProfile2TcontQueue7Weight OBJECT-TYPE The queue weight | 1.3.6.1.4.1.6296.101.23.51.7.1.1.9 | Integer32 (1..255) | read-only | current |
| sleGponProfile2TcontQueue8Weight OBJECT-TYPE The queue weight | 1.3.6.1.4.1.6296.101.23.51.7.1.1.10 | Integer32 (1..255) | read-only | current |
| sleGponProfile2TcontControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.7.2 | |||
| sleGponProfile2TcontControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.7.2.1 | INTEGER {addTcont(1), delTacont(2), setDbaProfile(3), setQueueWeight(4)} | read-write | current |
| sleGponProfile2TcontControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.7.2.2 | SleControlStatusType | read-write | current |
| sleGponProfile2TcontControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.7.2.3 | Gauge32 | read-write | current |
| sleGponProfile2TcontControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.7.2.4 | TimeTicks | read-write | current |
| sleGponProfile2TcontControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.7.2.5 | SleControlRequestResultType | read-write | current |
| sleGponProfile2TcontControlTName OBJECT-TYPE The Traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.7.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2TcontControlID OBJECT-TYPE The tcont ID | 1.3.6.1.4.1.6296.101.23.51.7.2.7 | Integer32 | read-write | current |
| sleGponProfile2TcontControlDbaProfile OBJECT-TYPE The DBA profile | 1.3.6.1.4.1.6296.101.23.51.7.2.8 | OCTET STRING | read-write | current |
| sleGponProfile2TcontControlQueue1Weight OBJECT-TYPE The queue weight | 1.3.6.1.4.1.6296.101.23.51.7.2.9 | Integer32 (1..255) | read-write | current |
| sleGponProfile2TcontControlQueue2Weight OBJECT-TYPE The queue weight | 1.3.6.1.4.1.6296.101.23.51.7.2.10 | Integer32 (1..255) | read-write | current |
| sleGponProfile2TcontControlQueue3Weight OBJECT-TYPE The queue weight | 1.3.6.1.4.1.6296.101.23.51.7.2.11 | Integer32 (1..255) | read-write | current |
| sleGponProfile2TcontControlQueue4Weight OBJECT-TYPE The queue weight | 1.3.6.1.4.1.6296.101.23.51.7.2.12 | Integer32 (1..255) | read-write | current |
| sleGponProfile2TcontControlQueue5Weight OBJECT-TYPE The queue weight | 1.3.6.1.4.1.6296.101.23.51.7.2.13 | Integer32 (1..255) | read-write | current |
| sleGponProfile2TcontControlQueue6Weight OBJECT-TYPE The queue weight | 1.3.6.1.4.1.6296.101.23.51.7.2.14 | Integer32 (1..255) | read-write | current |
| sleGponProfile2TcontControlQueue7Weight OBJECT-TYPE The queue weight | 1.3.6.1.4.1.6296.101.23.51.7.2.15 | Integer32 (1..255) | read-write | current |
| sleGponProfile2TcontControlQueue8Weight OBJECT-TYPE The queue weight | 1.3.6.1.4.1.6296.101.23.51.7.2.16 | Integer32 (1..255) | read-write | current |
| sleGponProfile2TcontNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.7.3 | |||
| sleGponProfile2TcontGemport OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.8 | |||
| sleGponProfile2TcontGemportTable OBJECT-TYPE sleGponProfile2TcontGemportTable | 1.3.6.1.4.1.6296.101.23.51.8.1 | not-accessible | current | |
| sleGponProfile2TcontGemportEntry OBJECT-TYPE key: sleGponProfile2TrafficIndex, sleGponProfile2TcontId, sleGponProfile2TcontGemportMapperId, sleGponProfile2TcontGemportId | 1.3.6.1.4.1.6296.101.23.51.8.1.1 | not-accessible | current | |
| sleGponProfile2TcontGemportMapperId OBJECT-TYPE The tcont mapper ID. | 1.3.6.1.4.1.6296.101.23.51.8.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2TcontGemportId OBJECT-TYPE The Tcont gemport Id | 1.3.6.1.4.1.6296.101.23.51.8.1.1.2 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2TcontGemportQueue OBJECT-TYPE The Tcont gemport Queue | 1.3.6.1.4.1.6296.101.23.51.8.1.1.3 | Integer32 (0 | 1..8) | read-only | current |
| sleGponProfile2TcontGemportControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.8.2 | |||
| sleGponProfile2TcontGemportControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.8.2.1 | INTEGER {addTcontGemport(1), delTcontGemport(2)} | read-write | current |
| sleGponProfile2TcontGemportControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.8.2.2 | SleControlStatusType | read-write | current |
| sleGponProfile2TcontGemportControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.8.2.3 | Gauge32 | read-write | current |
| sleGponProfile2TcontGemportControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.8.2.4 | TimeTicks | read-write | current |
| sleGponProfile2TcontGemportControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.8.2.5 | SleControlRequestResultType | read-write | current |
| sleGponProfile2TcontGemportControlTName OBJECT-TYPE The Traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.8.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2TcontGemportControlTcontId OBJECT-TYPE The tcont ID | 1.3.6.1.4.1.6296.101.23.51.8.2.7 | Integer32 | read-write | current |
| sleGponProfile2TcontGemportControlMapperId OBJECT-TYPE The tcont mapper ID. | 1.3.6.1.4.1.6296.101.23.51.8.2.8 | Integer32 | read-write | current |
| sleGponProfile2TcontGemportControlId OBJECT-TYPE The gemport ID | 1.3.6.1.4.1.6296.101.23.51.8.2.9 | Integer32 | read-write | current |
| sleGponProfile2TcontGemportControlQueue OBJECT-TYPE The gemport queue | 1.3.6.1.4.1.6296.101.23.51.8.2.10 | Integer32 (0 | 1..8) | read-write | current |
| sleGponProfile2TcontGemportNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.8.3 | |||
| sleGponProfile2Mcast OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.9 | |||
| sleGponProfile2McastTable OBJECT-TYPE sleGponProfile2McastTable | 1.3.6.1.4.1.6296.101.23.51.9.1 | not-accessible | current | |
| sleGponProfile2McastEntry OBJECT-TYPE key: sleGponProfile2McastIndex | 1.3.6.1.4.1.6296.101.23.51.9.1.1 | not-accessible | current | |
| sleGponProfile2McastIndex OBJECT-TYPE The Mcast profile index. | 1.3.6.1.4.1.6296.101.23.51.9.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2McastName OBJECT-TYPE The Mcast profile name. | 1.3.6.1.4.1.6296.101.23.51.9.1.1.2 | OCTET STRING | read-only | current |
| sleGponProfile2McastIgmpFunc OBJECT-TYPE The Igmp function snooping : Igmp snooping (default) proxy : Igmp proxy spr : Igmp snooping with proxy | 1.3.6.1.4.1.6296.101.23.51.9.1.1.3 | INTEGER {snooping(1), proxy(2), spr(3)} | read-only | current |
| sleGponProfile2McastIgmpImmLeave OBJECT-TYPE The immediate leave processing | 1.3.6.1.4.1.6296.101.23.51.9.1.1.4 | EnableFlag | read-only | current |
| sleGponProfile2McastIgmpRobust OBJECT-TYPE IGMP Snooping robustness variable | 1.3.6.1.4.1.6296.101.23.51.9.1.1.5 | Integer32 (0 | 1..7) | read-only | current |
| sleGponProfile2McastIgmpQuerierAddress OBJECT-TYPE The IGMP querier address. | 1.3.6.1.4.1.6296.101.23.51.9.1.1.6 | IpAddress | read-only | current |
| sleGponProfile2McastIgmpQuerierMaxRespTime OBJECT-TYPE The IGMP querier max-response time | 1.3.6.1.4.1.6296.101.23.51.9.1.1.7 | Integer32 (1..25) | read-only | current |
| sleGponProfile2McastIgmpQuerierInterval OBJECT-TYPE The IGMP querier query-interval. | 1.3.6.1.4.1.6296.101.23.51.9.1.1.8 | Integer32 (1..3600) | read-only | current |
| sleGponProfile2McastIgmpVersion OBJECT-TYPE The IGMP version. | 1.3.6.1.4.1.6296.101.23.51.9.1.1.9 | INTEGER {version1(1), version2(2), version3(3)} | read-only | current |
| sleGponProfile2McastIgmpUpRateLimit OBJECT-TYPE The IGMP upstream rate-limit | 1.3.6.1.4.1.6296.101.23.51.9.1.1.10 | Integer32 | read-only | current |
| sleGponProfile2McastIgmpTagCtrl OBJECT-TYPE The Igmp upstream tag control action. (TCI) | 1.3.6.1.4.1.6296.101.23.51.9.1.1.11 | INTEGER {bypass(1), add(2), replaceWithPbit(3), replace(4), unknown(255)} | read-only | current |
| sleGponProfile2McastIgmpTagCtrlVid OBJECT-TYPE The vid of TCI 1~4095 are vailable. 0 is None | 1.3.6.1.4.1.6296.101.23.51.9.1.1.12 | Integer32 (0 | 1..4095) | read-only | current |
| sleGponProfile2McastIgmpTagCtrlCos OBJECT-TYPE The Cos of TCI 0~7 are available. 255 is None. | 1.3.6.1.4.1.6296.101.23.51.9.1.1.13 | Integer32 (0..7 | 255) | read-only | current |
| sleGponProfile2McastIgmpDsTagCtrl OBJECT-TYPE The Igmp downstream tag control action. (TCI) | 1.3.6.1.4.1.6296.101.23.51.9.1.1.14 | INTEGER {bypass(1), remove(2), add(3), replaceWithPbit(4), replace(5), unknown(255)} | read-only | current |
| sleGponProfile2McastIgmpDsTagCtrlVid OBJECT-TYPE The vid of TCI 1~4095 are vailable. 0 is None | 1.3.6.1.4.1.6296.101.23.51.9.1.1.15 | Integer32 (0 | 1..4095) | read-only | current |
| sleGponProfile2McastIgmpDsTagCtrlCos OBJECT-TYPE The Cos of TCI 0~7 are available. 255 is None. | 1.3.6.1.4.1.6296.101.23.51.9.1.1.16 | Integer32 (0..7 | 255) | read-only | current |
| sleGponProfile2McastControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.9.2 | |||
| sleGponProfile2McastControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.9.2.1 | INTEGER {addMcastProfile(1), delMcastProfile(2), setIgmpFunction(3), setIgmpImmLeave(4), setIgmpRobuts(5), setIgmpQueirierInfo(6), setIgmpVersion(7), setIgmpUpRateLimit(8), setIgmpTagCtrl(9), setIgmpDsTagCtrl(10)} | read-write | current |
| sleGponProfile2McastControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.9.2.2 | SleControlStatusType | read-write | current |
| sleGponProfile2McastControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.9.2.3 | Gauge32 | read-write | current |
| sleGponProfile2McastControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.9.2.4 | TimeTicks | read-write | current |
| sleGponProfile2McastControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.9.2.5 | SleControlRequestResultType | read-write | current |
| sleGponProfile2McastControlName OBJECT-TYPE The Multicast profile name. | 1.3.6.1.4.1.6296.101.23.51.9.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2McastControlIgmpFunc OBJECT-TYPE The Igmp function snooping : Igmp snooping (default) proxy : Igmp proxy spr : Igmp snooping with proxy | 1.3.6.1.4.1.6296.101.23.51.9.2.7 | INTEGER {snooping(1), proxy(2), spr(3)} | read-write | current |
| sleGponProfile2McastControlIgmpImmLeave OBJECT-TYPE The immediate leave processing | 1.3.6.1.4.1.6296.101.23.51.9.2.8 | EnableFlag | read-write | current |
| sleGponProfile2McastControlIgmpRobust OBJECT-TYPE IGMP Snooping robustness variable | 1.3.6.1.4.1.6296.101.23.51.9.2.9 | Integer32 (0 | 1..7) | read-write | current |
| sleGponProfile2McastControlIgmpQuerierAddress OBJECT-TYPE The IGMP querier address. | 1.3.6.1.4.1.6296.101.23.51.9.2.10 | IpAddress | read-write | current |
| sleGponProfile2McastControlIgmpQuerierMaxRespTime OBJECT-TYPE The IGMP querier max-response time | 1.3.6.1.4.1.6296.101.23.51.9.2.11 | Integer32 (1..25) | read-write | current |
| sleGponProfile2McastControlIgmpQuerierInterval OBJECT-TYPE The IGMP querier query-interval. | 1.3.6.1.4.1.6296.101.23.51.9.2.12 | Integer32 (1..3600) | read-write | current |
| sleGponProfile2McastControlIgmpVersion OBJECT-TYPE The IGMP version. | 1.3.6.1.4.1.6296.101.23.51.9.2.13 | INTEGER {version1(1), version2(2), version3(3)} | read-write | current |
| sleGponProfile2McastControlIgmpUpRateLimit OBJECT-TYPE The IGMP upstream rate-limit | 1.3.6.1.4.1.6296.101.23.51.9.2.14 | Integer32 | read-write | current |
| sleGponProfile2McastControlIgmpTagCtrl OBJECT-TYPE The Igmp upstream tag control action. (TCI) | 1.3.6.1.4.1.6296.101.23.51.9.2.15 | INTEGER {bypass(1), add(2), replaceWithPbit(3), replace(4), unknown(255)} | read-write | current |
| sleGponProfile2McastControlIgmpTagCtrlVid OBJECT-TYPE The vid of TCI 1~4095 are vailable. | 1.3.6.1.4.1.6296.101.23.51.9.2.16 | Integer32 (1..4095) | read-write | current |
| sleGponProfile2McastControlIgmpTagCtrlCos OBJECT-TYPE The Cos of TCI 0~7 are available. | 1.3.6.1.4.1.6296.101.23.51.9.2.17 | Integer32 (0..7) | read-write | current |
| sleGponProfile2McastControlIgmpDsTagCtrl OBJECT-TYPE The Igmp downstream tag control action. (TCI) | 1.3.6.1.4.1.6296.101.23.51.9.2.18 | INTEGER {bypass(1), remove(2), add(3), replaceWithPbit(4), replace(5), unknown(255)} | read-write | current |
| sleGponProfile2McastControlIgmpDsTagCtrlVid OBJECT-TYPE The vid of TCI 1~4095 are vailable. | 1.3.6.1.4.1.6296.101.23.51.9.2.19 | Integer32 (1..4095) | read-write | current |
| sleGponProfile2McastControlIgmpDsTagCtrlCos OBJECT-TYPE The Cos of TCI 0~7 are available. | 1.3.6.1.4.1.6296.101.23.51.9.2.20 | Integer32 (0..7) | read-write | current |
| sleGponProfile2McastNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.9.3 | |||
| sleGponProfile2McastACL OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.10 | |||
| sleGponProfile2McastAclTable OBJECT-TYPE sleGponProfile2McastAclTable | 1.3.6.1.4.1.6296.101.23.51.10.1 | not-accessible | current | |
| sleGponProfile2McastAclEntry OBJECT-TYPE key: sleGponProfile2McastIndex, sleGponProfile2McastAclIndex | 1.3.6.1.4.1.6296.101.23.51.10.1.1 | not-accessible | current | |
| sleGponProfile2McastAclIndex OBJECT-TYPE The Mcast access-list index. | 1.3.6.1.4.1.6296.101.23.51.10.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2McastAclVid OBJECT-TYPE This specific the VLAN carrying the multicast group DS | 1.3.6.1.4.1.6296.101.23.51.10.1.1.2 | Integer32 (0 | 1..4094) | read-write | current |
| sleGponProfile2McastAclDstIpStart OBJECT-TYPE The destination IP range-start. | 1.3.6.1.4.1.6296.101.23.51.10.1.1.3 | IpAddress | read-only | current |
| sleGponProfile2McastAclDstIpEnd OBJECT-TYPE The destination IP range-end | 1.3.6.1.4.1.6296.101.23.51.10.1.1.4 | IpAddress | read-only | current |
| sleGponProfile2McastAclSrcIp OBJECT-TYPE The source IP. | 1.3.6.1.4.1.6296.101.23.51.10.1.1.5 | IpAddress | read-only | current |
| sleGponProfile2McastAclBandwidth OBJECT-TYPE The Imputed group bandwidth | 1.3.6.1.4.1.6296.101.23.51.10.1.1.6 | Integer32 | read-only | current |
| sleGponProfile2McastAclGem OBJECT-TYPE Th GEM port ID | 1.3.6.1.4.1.6296.101.23.51.10.1.1.7 | Integer32 (1..25) | read-only | current |
| sleGponProfile2McastAclCos OBJECT-TYPE The IGMP access-list CoS | 1.3.6.1.4.1.6296.101.23.51.10.1.1.8 | Integer32 (0..7) | read-only | current |
| sleGponProfile2McastAclControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.10.2 | |||
| sleGponProfile2McastAclControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.10.2.1 | INTEGER {addMcastAcl(1), delMcastAcl(2)} | read-write | current |
| sleGponProfile2McastAclControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.10.2.2 | SleControlStatusType | read-write | current |
| sleGponProfile2McastAclControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.10.2.3 | Gauge32 | read-write | current |
| sleGponProfile2McastAclControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.10.2.4 | TimeTicks | read-write | current |
| sleGponProfile2McastAclControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.10.2.5 | SleControlRequestResultType | read-write | current |
| sleGponProfile2McastAclControlIndex OBJECT-TYPE The Mcast access-list index. | 1.3.6.1.4.1.6296.101.23.51.10.2.6 | Integer32 | read-write | current |
| sleGponProfile2McastAclControlVid OBJECT-TYPE This specific the VLAN carrying the multicast group DS | 1.3.6.1.4.1.6296.101.23.51.10.2.7 | Integer32 (0 | 1..4094) | read-write | current |
| sleGponProfile2McastAclControlName OBJECT-TYPE The Mcast profile name. | 1.3.6.1.4.1.6296.101.23.51.10.2.8 | OCTET STRING | read-write | current |
| sleGponProfile2McastAclControlDstIpStart OBJECT-TYPE The destination IP range-start. | 1.3.6.1.4.1.6296.101.23.51.10.2.9 | IpAddress | read-write | current |
| sleGponProfile2McastAclControlDstIpEnd OBJECT-TYPE The destination IP range-end | 1.3.6.1.4.1.6296.101.23.51.10.2.10 | IpAddress | read-write | current |
| sleGponProfile2McastAclControlSrcIp OBJECT-TYPE The source IP. | 1.3.6.1.4.1.6296.101.23.51.10.2.11 | IpAddress | read-write | current |
| sleGponProfile2McastAclControlBandwidth OBJECT-TYPE The Imputed group bandwidth | 1.3.6.1.4.1.6296.101.23.51.10.2.12 | Integer32 | read-write | current |
| sleGponProfile2McastAclControlGem OBJECT-TYPE The GEM port ID | 1.3.6.1.4.1.6296.101.23.51.10.2.13 | Integer32 (1..25) | read-write | current |
| sleGponProfile2McastAclControlCos OBJECT-TYPE The IGMP access-list CoS | 1.3.6.1.4.1.6296.101.23.51.10.2.14 | Integer32 (0..7) | read-write | current |
| sleGponProfile2McastAclNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.10.3 | |||
| sleGponProfile2McastSACL OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.11 | |||
| sleGponProfile2McastSAclTable OBJECT-TYPE sleGponProfile2McastSAclTable | 1.3.6.1.4.1.6296.101.23.51.11.1 | not-accessible | current | |
| sleGponProfile2McastSAclEntry OBJECT-TYPE key: sleGponProfile2McastIndex, sleGponProfile2McastSAclIndex | 1.3.6.1.4.1.6296.101.23.51.11.1.1 | not-accessible | current | |
| sleGponProfile2McastSAclIndex OBJECT-TYPE The Mcast statis access-list index. | 1.3.6.1.4.1.6296.101.23.51.11.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2McastSAclVid OBJECT-TYPE This specific the VLAN carrying the multicast group DS | 1.3.6.1.4.1.6296.101.23.51.11.1.1.2 | Integer32 (0 | 1..4094) | read-only | current |
| sleGponProfile2McastSAclDstIpStart OBJECT-TYPE The destination IP range-start. | 1.3.6.1.4.1.6296.101.23.51.11.1.1.3 | IpAddress | read-only | current |
| sleGponProfile2McastSAclDstIpEnd OBJECT-TYPE The destination IP range-end | 1.3.6.1.4.1.6296.101.23.51.11.1.1.4 | IpAddress | read-only | current |
| sleGponProfile2McastSAclSrcIp OBJECT-TYPE The source IP. | 1.3.6.1.4.1.6296.101.23.51.11.1.1.5 | IpAddress | read-only | current |
| sleGponProfile2McastSAclBandwidth OBJECT-TYPE The Imputed group bandwidth | 1.3.6.1.4.1.6296.101.23.51.11.1.1.6 | Integer32 | read-only | current |
| sleGponProfile2McastSAclGem OBJECT-TYPE EM port ID | 1.3.6.1.4.1.6296.101.23.51.11.1.1.7 | Integer32 (1..25) | read-only | current |
| sleGponProfile2McastSAclCos OBJECT-TYPE The Multicast access-list CoS | 1.3.6.1.4.1.6296.101.23.51.11.1.1.8 | Integer32 (0..7) | read-only | current |
| sleGponProfile2McastSAclControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.11.2 | |||
| sleGponProfile2McastSAclControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.11.2.1 | INTEGER {addMcastSACL(1), delMcastSACL(2)} | read-write | current |
| sleGponProfile2McastSAclControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.11.2.2 | SleControlStatusType | read-write | current |
| sleGponProfile2McastSAclControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.11.2.3 | Gauge32 | read-write | current |
| sleGponProfile2McastSAclControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.11.2.4 | TimeTicks | read-write | current |
| sleGponProfile2McastSAclControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.11.2.5 | SleControlRequestResultType | read-write | current |
| sleGponProfile2McastSAclControlIndex OBJECT-TYPE The Mcast statis access-list index. | 1.3.6.1.4.1.6296.101.23.51.11.2.6 | Integer32 | read-write | current |
| sleGponProfile2McastSAclControlVid OBJECT-TYPE This specific the VLAN carrying the multicast group DS | 1.3.6.1.4.1.6296.101.23.51.11.2.7 | Integer32 (0 | 1..4094) | read-write | current |
| sleGponProfile2McastSAclControlName OBJECT-TYPE The Mcast statis access-list name. | 1.3.6.1.4.1.6296.101.23.51.11.2.8 | OCTET STRING | read-write | current |
| sleGponProfile2McastSAclControlDstIpStart OBJECT-TYPE The destination IP range-start. | 1.3.6.1.4.1.6296.101.23.51.11.2.9 | IpAddress | read-write | current |
| sleGponProfile2McastSAclControlDstIpEnd OBJECT-TYPE The destination IP range-end | 1.3.6.1.4.1.6296.101.23.51.11.2.10 | IpAddress | read-write | current |
| sleGponProfile2McastSAclControlSrcIp OBJECT-TYPE The source IP. | 1.3.6.1.4.1.6296.101.23.51.11.2.11 | IpAddress | read-write | current |
| sleGponProfile2McastSAclControlBandwidth OBJECT-TYPE The Imputed group bandwidth | 1.3.6.1.4.1.6296.101.23.51.11.2.12 | Integer32 | read-write | current |
| sleGponProfile2McastSAclControlGem OBJECT-TYPE The GEM port ID | 1.3.6.1.4.1.6296.101.23.51.11.2.13 | Integer32 (1..25) | read-write | current |
| sleGponProfile2McastSAclControlCos OBJECT-TYPE The Multicast access-list CoS | 1.3.6.1.4.1.6296.101.23.51.11.2.14 | Integer32 (0..7) | read-write | current |
| sleGponProfile2McastSAclNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.11.3 | |||
| sleGponProfile2Onu OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.12 | |||
| sleGponProfile2OnuTable OBJECT-TYPE sleGponProfile2OnuTable | 1.3.6.1.4.1.6296.101.23.51.12.1 | not-accessible | current | |
| sleGponProfile2OnuEntry OBJECT-TYPE key: sleGponProfile2OnuIndex | 1.3.6.1.4.1.6296.101.23.51.12.1.1 | not-accessible | current | |
| sleGponProfile2OnuIndex OBJECT-TYPE The ONU profile index. | 1.3.6.1.4.1.6296.101.23.51.12.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2OnuName OBJECT-TYPE The Onu profile name. | 1.3.6.1.4.1.6296.101.23.51.12.1.1.2 | OCTET STRING | read-only | current |
| sleGponProfile2OnuRxPowerHighThresh OBJECT-TYPE ONU Receive power configuration : high threshold | 1.3.6.1.4.1.6296.101.23.51.12.1.1.3 | Integer32 (-127..0 | 255) | read-only | current |
| sleGponProfile2OnuRxPowerLowThresh OBJECT-TYPE ONU Receive power configuration : low threshold | 1.3.6.1.4.1.6296.101.23.51.12.1.1.4 | Integer32 (-127..0 | 255) | read-write | current |
| sleGponProfile2OnuRogueAlarmCount OBJECT-TYPE The count of rogue onu alarm. | 1.3.6.1.4.1.6296.101.23.51.12.1.1.5 | Integer32 (-1 | 1..5) | read-only | current |
| sleGponProfile2OnuRoguePollingInterval OBJECT-TYPE The polling interval of rogue alarm. | 1.3.6.1.4.1.6296.101.23.51.12.1.1.6 | Integer32 (-1 | 10..60000) | read-only | current |
| sleGponProfile2OnuRoguePollingCount OBJECT-TYPE The polling count of rogue ONU. | 1.3.6.1.4.1.6296.101.23.51.12.1.1.7 | Integer32 (1..250) | read-only | current |
| sleGponProfile2OnuRogueWaitingTime OBJECT-TYPE The waiting time of rogue onu alarm | 1.3.6.1.4.1.6296.101.23.51.12.1.1.8 | Integer32 (-1 | 100..50000) | read-only | current |
| sleGponProfile2OnuTrafficProfile OBJECT-TYPE The traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.12.1.1.9 | OCTET STRING | read-only | current |
| sleGponProfile2OnuPmProfile OBJECT-TYPE The PM profile assigned to ONU profile. | 1.3.6.1.4.1.6296.101.23.51.12.1.1.10 | OCTET STRING | read-only | current |
| sleGponProfile2OnuCircuitPackCardConfigCDs1E1 OBJECT-TYPE Card Configuration value in Circuit Pack ME. CDs1E1 -> Configurable DS1/E1 CDs1E1J1 -> Configurable DS1/E1/J1 | 1.3.6.1.4.1.6296.101.23.51.12.1.1.11 | INTEGER {ds1(0), e1(1), unUsed(255)} | read-only | current |
| sleGponProfile2OnuCircuitPackCardConfigCDs1E1J1 OBJECT-TYPE Card Configuration value in Circuit Pack ME. CDs1E1 -> Configurable DS1/E1 CDs1E1J1 -> Configurable DS1/E1/J1 | 1.3.6.1.4.1.6296.101.23.51.12.1.1.12 | INTEGER {ds1(0), e1(1), j1(2), unUsed(255)} | read-only | current |
| sleGponProfile2OnuSWWatchdog OBJECT-TYPE gpon-sw-watchdog (enable|disable) | 1.3.6.1.4.1.6296.101.23.51.12.1.1.13 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponProfile2OnuLinkPassThrough OBJECT-TYPE link-pass-through (enable|disable) | 1.3.6.1.4.1.6296.101.23.51.12.1.1.14 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponProfile2OnuCpuLoadThr OBJECT-TYPE The cpu load threshold | 1.3.6.1.4.1.6296.101.23.51.12.1.1.15 | INTEGER (0..100) | read-only | current |
| sleGponProfile2OnuMemoryUsageThr OBJECT-TYPE The memory usage threshold. | 1.3.6.1.4.1.6296.101.23.51.12.1.1.16 | INTEGER (0..100) | read-only | current |
| sleGponProfile2OnuTemperatureHighThr OBJECT-TYPE The temperature high threshold | 1.3.6.1.4.1.6296.101.23.51.12.1.1.17 | INTEGER (-40..0 | 1..100) | read-only | current |
| sleGponProfile2OnuTemperatureLowThr OBJECT-TYPE The temperature low threshold | 1.3.6.1.4.1.6296.101.23.51.12.1.1.18 | INTEGER (-40..0 | 1..100) | read-only | current |
| sleGponProfile2OnuLoopDetectStatus OBJECT-TYPE The loop detect status. | 1.3.6.1.4.1.6296.101.23.51.12.1.1.19 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponProfile2OnuLoopDetectSendPeriod OBJECT-TYPE The sending period configuration for loop dectect. (default:10 sec) 0: disable | 1.3.6.1.4.1.6296.101.23.51.12.1.1.20 | Integer32 (0..65535) | read-only | current |
| sleGponProfile2OnuLoopDetectDetectedAction OBJECT-TYPE The detected action. | 1.3.6.1.4.1.6296.101.23.51.12.1.1.21 | INTEGER {check(0), block(1)} | read-only | current |
| sleGponProfile2OnuLoopDetectBlcokTimer OBJECT-TYPE the block timer. (default:600 sec) 0: unlimited. | 1.3.6.1.4.1.6296.101.23.51.12.1.1.22 | Integer32 (0..65535) | read-only | current |
| sleGponProfile2OnuTr069Url OBJECT-TYPE The tr-069 management URL | 1.3.6.1.4.1.6296.101.23.51.12.1.1.23 | OCTET STRING | read-only | current |
| sleGponProfile2OnuTr069AccessId OBJECT-TYPE The tr-069 management Access ID | 1.3.6.1.4.1.6296.101.23.51.12.1.1.24 | OCTET STRING | read-only | current |
| sleGponProfile2OnuTr069AccessPassword OBJECT-TYPE The tr-069 management Access password | 1.3.6.1.4.1.6296.101.23.51.12.1.1.25 | OCTET STRING | read-only | current |
| sleGponProfile2OnuTr069Status OBJECT-TYPE The tr-069 management status | 1.3.6.1.4.1.6296.101.23.51.12.1.1.26 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponProfile2OnuTr069Tag OBJECT-TYPE The Tr069 Vlan tag. | 1.3.6.1.4.1.6296.101.23.51.12.1.1.27 | Integer32 (1..4094) | read-only | current |
| sleGponProfile2OnuSwitchControlUplinkMacLearning OBJECT-TYPE The ONT switch uplink MAC learning | 1.3.6.1.4.1.6296.101.23.51.12.1.1.28 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponPorifle2OnuAniVoltageHighThr OBJECT-TYPE The voltage high threshold. (0.1 V) | 1.3.6.1.4.1.6296.101.23.51.12.1.1.29 | Integer32 | read-only | current |
| sleGponPorifle2OnuAniVoltageLowThr OBJECT-TYPE The voltage low threshold. (0.1 V) | 1.3.6.1.4.1.6296.101.23.51.12.1.1.30 | Integer32 | read-only | current |
| sleGponPorifle2OnuAniTemperatureHighThr OBJECT-TYPE The temperature high threshold. | 1.3.6.1.4.1.6296.101.23.51.12.1.1.31 | Integer32 | read-only | current |
| sleGponPorifle2OnuAniTemperatureLowThr OBJECT-TYPE The temperature low threshold. | 1.3.6.1.4.1.6296.101.23.51.12.1.1.32 | Integer32 | read-only | current |
| sleGponPorifle2OnuAniTxBiasHighThr OBJECT-TYPE The TX-bias high threshold. | 1.3.6.1.4.1.6296.101.23.51.12.1.1.33 | Integer32 | read-only | current |
| sleGponPorifle2OnuAniTxBiasLowThr OBJECT-TYPE The TX-bias low threshold. | 1.3.6.1.4.1.6296.101.23.51.12.1.1.34 | Integer32 | read-only | current |
| sleGponPorifle2OnuAniTxpowerHighThr OBJECT-TYPE The TX power high threshold. (0.1 dBm) | 1.3.6.1.4.1.6296.101.23.51.12.1.1.35 | Integer32 | read-only | current |
| sleGponPorifle2OnuAniTxpowerLowThr OBJECT-TYPE The TX power low threshold. (0.1 dBm) | 1.3.6.1.4.1.6296.101.23.51.12.1.1.36 | Integer32 | read-only | current |
| sleGponProfile2OnuIgmpMaxGroups OBJECT-TYPE The max count of IGMP group. (0:unlimited) | 1.3.6.1.4.1.6296.101.23.51.12.1.1.37 | Integer32 (0..255) | read-only | current |
| sleGponProfile2OnuIgmpUpRateLimit OBJECT-TYPE The IGMP upstream rate limit.(0:unlimited) | 1.3.6.1.4.1.6296.101.23.51.12.1.1.38 | Integer32 (0..65535) | read-only | current |
| sleGponProfile2OnuIgmpHostTracking OBJECT-TYPE Igmp Host Tracking (enable|disable) | 1.3.6.1.4.1.6296.101.23.51.12.1.1.39 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponProfile2OnuMacFullPolicy OBJECT-TYPE Mac Full Policy (drop|forward) | 1.3.6.1.4.1.6296.101.23.51.12.1.1.40 | INTEGER {drop(0), forward(1)} | read-only | current |
| sleGponProfile2OnuCpuPacketLimitBroadcast OBJECT-TYPE CPU Packet Limit Broadcast(Packet limit in steps of 100) | 1.3.6.1.4.1.6296.101.23.51.12.1.1.41 | Integer32 (0 | 100..40000) | read-only | current |
| sleGponProfile2OnuCpuPacketLimitMulticast OBJECT-TYPE CPU Packet Limit Multicast(Packet limit in steps of 100) | 1.3.6.1.4.1.6296.101.23.51.12.1.1.42 | Integer32 (0 | 100..40000) | read-only | current |
| sleGponProfile2OnuCpuPacketLimitDlf OBJECT-TYPE CPU Packet Limit L2 DLF(Packet limit in steps of 100) | 1.3.6.1.4.1.6296.101.23.51.12.1.1.43 | Integer32 (0 | 100..40000) | read-only | current |
| sleGponProfile2OnuRateLimitDownstream OBJECT-TYPE The rate limit for downstream (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.12.1.1.44 | Integer32 | read-only | current |
| sleGponProfile2OnuTrapToCpuDlf OBJECT-TYPE The DLF is traped to CPU | 1.3.6.1.4.1.6296.101.23.51.12.1.1.45 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponProfile2OnuMgmtIpPathStatus OBJECT-TYPE The Ip-path management status | 1.3.6.1.4.1.6296.101.23.51.12.1.1.46 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponProfile2OnuMgmtIpPathProtocol OBJECT-TYPE The Ip-path management protocol | 1.3.6.1.4.1.6296.101.23.51.12.1.1.47 | INTEGER {ftp(1), tftp(2)} | read-only | current |
| sleGponProfile2OnuMgmtIpPathId OBJECT-TYPE The Ip-path management access ID | 1.3.6.1.4.1.6296.101.23.51.12.1.1.48 | OCTET STRING | read-only | current |
| sleGponProfile2OnuMgmtIpPathPassword OBJECT-TYPE The Ip-path management access password | 1.3.6.1.4.1.6296.101.23.51.12.1.1.49 | OCTET STRING | read-only | current |
| sleGponProfile2OnuMgmtIpPathUrl OBJECT-TYPE The Ip-path management URL | 1.3.6.1.4.1.6296.101.23.51.12.1.1.50 | OCTET STRING | read-only | current |
| sleGponProfile2OnuMgmtIpPathFilename OBJECT-TYPE The Ip-path management File name | 1.3.6.1.4.1.6296.101.23.51.12.1.1.51 | OCTET STRING | read-only | current |
| sleGponProfile2OnuGsp OBJECT-TYPE The generic status portal managed entity provides a way for the OLT to discover the status and configuration information of a non-OMCI management domain within an ONU | 1.3.6.1.4.1.6296.101.23.51.12.1.1.52 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponProfile2OnuGspAvcReportRate OBJECT-TYPE This attribute governs the rate at which the generic status portal generates attribute value change notifications. | 1.3.6.1.4.1.6296.101.23.51.12.1.1.53 | INTEGER {disable(0), min10(1), sec1(2), everyChange(3)} | read-only | current |
| sleGponProfile2OnuSnmpROCommunity OBJECT-TYPE ead Only community key | 1.3.6.1.4.1.6296.101.23.51.12.1.1.54 | OCTET STRING | read-only | current |
| sleGponProfile2OnuSnmpRWCommunity OBJECT-TYPE Read Write community key | 1.3.6.1.4.1.6296.101.23.51.12.1.1.55 | OCTET STRING | read-only | current |
| sleGponProfile2OnuSnmpSecurityName OBJECT-TYPE Security Name | 1.3.6.1.4.1.6296.101.23.51.12.1.1.56 | OCTET STRING | read-only | current |
| sleGponProfile2OnuSnmpAgentAddresHost OBJECT-TYPE ONU Ip-host config data index | 1.3.6.1.4.1.6296.101.23.51.12.1.1.57 | Integer32 | read-only | current |
| sleGponProfile2OnuSnmpTrapHostAddress OBJECT-TYPE Host address for received traps | 1.3.6.1.4.1.6296.101.23.51.12.1.1.58 | IpAddress | read-only | current |
| sleGponProfile2OnuSnmpTrapHostPort OBJECT-TYPE Trap communication port | 1.3.6.1.4.1.6296.101.23.51.12.1.1.59 | Integer32 (0 | 1..65535) | read-only | current |
| sleGponProfile2OnuSnmpSysName OBJECT-TYPE An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. | 1.3.6.1.4.1.6296.101.23.51.12.1.1.60 | OCTET STRING | read-only | current |
| sleGponProfile2OnuControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.12.2 | |||
| sleGponProfile2OnuControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.12.2.1 | INTEGER {addOnuProfile(1), delOnuProfile(2), setRogueOnuInfo(3), setRxPower(4), setTrafficProfile(5), setPmProfile(6), setCircuitPack(7), setSWWatchdog(8), setLinkPassThrough(9), setCpuLoadThr(10), setMemoryUsageThr(11), setTemperatureHighThr(12), setTemperatureLowThr(13), setLoopDetect(14), setTr069Url(15), clearTr069Url(16), setTr069Status(17), setTr069Access(18), clearTr069Access(19), setTr069Tag(20), clearTr069Tag(21), setSwitchControl(22), setAniVoltageHighThr(23), setAniVoltageLowThr(24), setAniTemperatureHighThr(25), setAniTemperatureLowThr(26), setAniTxBiasHighThr(27), setAniTxBiasLowThr(28), setAniTxpowerHighThr(29), setAniTxpowerLowThr(30), setIgmpMaxGroups(31), setIgmpUpRateLimit(32), setIgmpHostTracking(33), setMacFullPolicy(34), setCpuPacketLimitBroadcast(35), setCpuPacketLimitMulticast(36), setCpuPacketLimitDlf(37), setRateLimitDownstream(38), setTrapToCpuDlf(39), setMgmtIpPathStatus(40), setMgmtIpPathProtocol(41), setMgmtIpPathInfo(42), clearMgmtIpPath(43), setGsp(44), setSnmpRoCommunity(45), setSnmpRwCommunity(46), setSnmpSecurityName(47), setSnmpAgentAddress(48), setSnmpTrapHost(49), setSnmpSysName(50)} | read-write | current |
| sleGponProfile2OnuControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.12.2.2 | SleControlStatusType | read-only | current |
| sleGponProfile2OnuControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.12.2.3 | Gauge32 | read-write | current |
| sleGponProfile2OnuControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.12.2.4 | TimeTicks | read-only | current |
| sleGponProfile2OnuControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.12.2.5 | SleControlRequestResultType | read-write | current |
| sleGponProfile2OnuControlName OBJECT-TYPE The Onu profile name. | 1.3.6.1.4.1.6296.101.23.51.12.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2OnuControlRxPowerHighThresh OBJECT-TYPE ONU Receive power configuration : high threshold | 1.3.6.1.4.1.6296.101.23.51.12.2.7 | Integer32 (-127..0 | 255) | read-write | current |
| sleGponProfile2OnuControlRxPowerLowThresh OBJECT-TYPE ONU Receive power configuration : low threshold | 1.3.6.1.4.1.6296.101.23.51.12.2.8 | Integer32 (-127..0 | 255) | read-write | current |
| sleGponProfile2OnuControlRogueAlarmCount OBJECT-TYPE The count of rogue onu alarm. | 1.3.6.1.4.1.6296.101.23.51.12.2.9 | Integer32 (-1 | 1..5) | read-write | current |
| sleGponProfile2OnuControlRoguePollingInterval OBJECT-TYPE The polling interval of rogue alarm. | 1.3.6.1.4.1.6296.101.23.51.12.2.10 | Integer32 (-1 | 10..60000) | read-write | current |
| sleGponProfile2OnuControlRoguePollingCount OBJECT-TYPE The polling count of rogue alarm. | 1.3.6.1.4.1.6296.101.23.51.12.2.11 | Integer32 (1..250) | read-write | current |
| sleGponProfile2OnuControlRogueWaitingTime OBJECT-TYPE The waiting time of rogue onu alarm | 1.3.6.1.4.1.6296.101.23.51.12.2.12 | Integer32 (-1 | 100..50000) | read-write | current |
| sleGponProfile2OnuControlTrafficProfile OBJECT-TYPE The traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.12.2.13 | OCTET STRING | read-write | current |
| sleGponProfile2OnuControlPmProfile OBJECT-TYPE The PM profile assigned to ONU profile. | 1.3.6.1.4.1.6296.101.23.51.12.2.14 | OCTET STRING | read-write | current |
| sleGponProfile2OnuControlCircuitPackCardConfigCDs1E1 OBJECT-TYPE Card Configuration value in Circuit Pack ME. CDs1E1 -> Configurable DS1/E1 CDs1E1J1 -> Configurable DS1/E1/J1 | 1.3.6.1.4.1.6296.101.23.51.12.2.15 | INTEGER {ds1(0), e1(1), unUsed(255)} | read-write | current |
| sleGponProfile2OnuControlCircuitPackCardConfigCDs1E1J1 OBJECT-TYPE Card Configuration value in Circuit Pack ME. CDs1E1 -> Configurable DS1/E1 CDs1E1J1 -> Configurable DS1/E1/J1 | 1.3.6.1.4.1.6296.101.23.51.12.2.16 | INTEGER {ds1(0), e1(1), j1(2), unUsed(255)} | read-write | current |
| sleGponProfile2OnuControlSWWatchdog OBJECT-TYPE gpon-sw-watchdog (enable|disable) | 1.3.6.1.4.1.6296.101.23.51.12.2.17 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponProfile2OnuControlLinkPassThrough OBJECT-TYPE link-pass-through (enable|disable) | 1.3.6.1.4.1.6296.101.23.51.12.2.18 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponProfile2OnuControlCpuLoadThr OBJECT-TYPE The cpu load threshold | 1.3.6.1.4.1.6296.101.23.51.12.2.19 | INTEGER (0..100) | read-write | current |
| sleGponProfile2OnuControlMemoryUsageThr OBJECT-TYPE The memory usage threshold. | 1.3.6.1.4.1.6296.101.23.51.12.2.20 | INTEGER (0..100) | read-write | current |
| sleGponProfile2OnuControlTemperatureHighThr OBJECT-TYPE The temperature high threshold | 1.3.6.1.4.1.6296.101.23.51.12.2.21 | INTEGER (-40..0 | 1..100) | read-write | current |
| sleGponProfile2OnuControlTemperatureLowThr OBJECT-TYPE The temperature low threshold | 1.3.6.1.4.1.6296.101.23.51.12.2.22 | INTEGER (-40..0 | 1..100) | read-write | current |
| sleGponProfile2OnuControlLoopDetectStatus OBJECT-TYPE The loop detect status. | 1.3.6.1.4.1.6296.101.23.51.12.2.23 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponProfile2OnuControlLoopDetectSendPeriod OBJECT-TYPE The sending period configuration for loop dectect. (default:10 sec) 0: disable | 1.3.6.1.4.1.6296.101.23.51.12.2.24 | Integer32 (0..65535) | read-write | current |
| sleGponProfile2OnuControlLoopDetectDetectedAction OBJECT-TYPE The detected action. | 1.3.6.1.4.1.6296.101.23.51.12.2.25 | INTEGER {check(0), block(1)} | read-write | current |
| sleGponProfile2OnuControlLoopDetectBlcokTimer OBJECT-TYPE the block timer. (default:600 sec) 0: unlimited. | 1.3.6.1.4.1.6296.101.23.51.12.2.26 | Integer32 (0..65535) | read-write | current |
| sleGponProfile2OnuControlTr069Url OBJECT-TYPE The tr-069 management URL | 1.3.6.1.4.1.6296.101.23.51.12.2.27 | OCTET STRING | read-write | current |
| sleGponProfile2OnuControlTr069AccessId OBJECT-TYPE The tr-069 management Access ID | 1.3.6.1.4.1.6296.101.23.51.12.2.28 | OCTET STRING | read-write | current |
| sleGponProfile2OnuControlTr069AccessPassword OBJECT-TYPE The tr-069 management Access password | 1.3.6.1.4.1.6296.101.23.51.12.2.29 | OCTET STRING | read-write | current |
| sleGponProfile2OnuControlTr069Status OBJECT-TYPE The tr-069 management status | 1.3.6.1.4.1.6296.101.23.51.12.2.30 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponProfile2OnuControlTr069Tag OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.12.2.31 | Integer32 (1..4094) | read-write | current |
| sleGponProfile2OnuControlSwitchControlUplinkMacLearning OBJECT-TYPE The ONT switch uplink MAC learning | 1.3.6.1.4.1.6296.101.23.51.12.2.32 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponPorifle2OnuControlAniVoltageHighThr OBJECT-TYPE The voltage high threshold (0.1 V) | 1.3.6.1.4.1.6296.101.23.51.12.2.33 | Integer32 | read-write | current |
| sleGponPorifle2OnuControlAniVoltageLowThr OBJECT-TYPE The voltage low threshold (0.1 V) | 1.3.6.1.4.1.6296.101.23.51.12.2.34 | Integer32 | read-write | current |
| sleGponPorifle2OnuControlAniTemperatureHighThr OBJECT-TYPE The temperature high threshold | 1.3.6.1.4.1.6296.101.23.51.12.2.35 | Integer32 | read-write | current |
| sleGponPorifle2OnuControlAniTemperatureLowThr OBJECT-TYPE The temperature low threshold | 1.3.6.1.4.1.6296.101.23.51.12.2.36 | Integer32 | read-write | current |
| sleGponPorifle2OnuControlAniTxBiasHighThr OBJECT-TYPE The tx-bias high threshold | 1.3.6.1.4.1.6296.101.23.51.12.2.37 | Integer32 | read-write | current |
| sleGponPorifle2OnuControlAniTxBiasLowThr OBJECT-TYPE The tx-bias low threshold | 1.3.6.1.4.1.6296.101.23.51.12.2.38 | Integer32 | read-write | current |
| sleGponPorifle2OnuControlAniTxpowerHighThr OBJECT-TYPE The TX power high threshold (0.1 dBm) | 1.3.6.1.4.1.6296.101.23.51.12.2.39 | Integer32 | read-write | current |
| sleGponPorifle2OnuControlAniTxpowerLowThr OBJECT-TYPE The TX power low threshold (0.1 dBm) | 1.3.6.1.4.1.6296.101.23.51.12.2.40 | Integer32 | read-write | current |
| sleGponProfile2OnuControlIgmpMaxGroups OBJECT-TYPE The max count of IGMP group. (0:unlimited) | 1.3.6.1.4.1.6296.101.23.51.12.2.41 | Integer32 (0..255) | read-write | current |
| sleGponProfile2OnuControlIgmpUpRateLimit OBJECT-TYPE The IGMP upstream rate limit.(0:unlimited) | 1.3.6.1.4.1.6296.101.23.51.12.2.42 | Integer32 (0..65535) | read-write | current |
| sleGponProfile2OnuControlIgmpHostTracking OBJECT-TYPE Igmp Host Tracking (enable|disable) | 1.3.6.1.4.1.6296.101.23.51.12.2.43 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponProfile2OnuControlMacFullPolicy OBJECT-TYPE The mac table full policy (drop|forward) | 1.3.6.1.4.1.6296.101.23.51.12.2.44 | INTEGER {drop(0), forward(1)} | read-write | current |
| sleGponProfile2OnuControlCpuPacketLimitBroadcast OBJECT-TYPE The cpu packet rate broadcast limit.(Packet limit in steps of 100)(0: unlimited) | 1.3.6.1.4.1.6296.101.23.51.12.2.45 | Integer32 (0 | 100..40000) | read-write | current |
| sleGponProfile2OnuControlCpuPacketLimitMulticast OBJECT-TYPE The cpu packet rate multicast limit.(Packet limit in steps of 100)(0: unlimited) | 1.3.6.1.4.1.6296.101.23.51.12.2.46 | Integer32 (0 | 100..40000) | read-write | current |
| sleGponProfile2OnuControlCpuPacketLimitDlf OBJECT-TYPE The cpu packet rate L2 dlf limit.(Packet limit in steps of 100)(0: unlimited) | 1.3.6.1.4.1.6296.101.23.51.12.2.47 | Integer32 (0 | 100..40000) | read-write | current |
| sleGponProfile2OnuControlRateLimitDownstream OBJECT-TYPE The overall rate limit for downstream (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.12.2.48 | Integer32 | read-write | current |
| sleGponProfile2OnuControlTrapToCpuDlf OBJECT-TYPE The DLF is traped to CPU | 1.3.6.1.4.1.6296.101.23.51.12.2.49 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponProfile2OnuControlMgmtIpPathStatus OBJECT-TYPE The Ip-path management status | 1.3.6.1.4.1.6296.101.23.51.12.2.50 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponProfile2OnuControlMgmtIpPathProtocol OBJECT-TYPE The Ip-path management protocol | 1.3.6.1.4.1.6296.101.23.51.12.2.51 | INTEGER {ftp(1), tftp(2)} | read-write | current |
| sleGponProfile2OnuControlMgmtIpPathId OBJECT-TYPE The Ip-path management access ID | 1.3.6.1.4.1.6296.101.23.51.12.2.52 | OCTET STRING | read-write | current |
| sleGponProfile2OnuControlMgmtIpPathPassword OBJECT-TYPE The Ip-path management access password | 1.3.6.1.4.1.6296.101.23.51.12.2.53 | OCTET STRING | read-write | current |
| sleGponProfile2OnuControlMgmtIpPathUrl OBJECT-TYPE The Ip-path management URL | 1.3.6.1.4.1.6296.101.23.51.12.2.54 | OCTET STRING | read-write | current |
| sleGponProfile2OnuControlMgmtIpPathFilename OBJECT-TYPE The Ip-path management File name | 1.3.6.1.4.1.6296.101.23.51.12.2.55 | OCTET STRING | read-write | current |
| sleGponProfile2OnuControlGsp OBJECT-TYPE The generic status portal managed entity provides a way for the OLT to discover the status and configuration information of a non-OMCI management domain within an ONU | 1.3.6.1.4.1.6296.101.23.51.12.2.56 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponProfile2OnuControlGspAvcReportRate OBJECT-TYPE This attribute governs the rate at which the generic status portal generates attribute value change notifications. | 1.3.6.1.4.1.6296.101.23.51.12.2.57 | INTEGER {disable(0), min10(1), sec1(2), everyChange(3)} | read-write | current |
| sleGponProfile2OnuControlSnmpROCommunity OBJECT-TYPE Read Only community key | 1.3.6.1.4.1.6296.101.23.51.12.2.58 | OCTET STRING | read-write | current |
| sleGponProfile2OnuControlSnmpRWCommunity OBJECT-TYPE Read Write community key | 1.3.6.1.4.1.6296.101.23.51.12.2.59 | OCTET STRING | read-write | current |
| sleGponProfile2OnuControlSnmpSecurityName OBJECT-TYPE Security Name | 1.3.6.1.4.1.6296.101.23.51.12.2.60 | OCTET STRING | read-write | current |
| sleGponProfile2OnuControlSnmpAgentAddresHost OBJECT-TYPE ONU Ip-host config data index | 1.3.6.1.4.1.6296.101.23.51.12.2.61 | Integer32 | read-write | current |
| sleGponProfile2OnuControlSnmpTrapHostAddress OBJECT-TYPE Host address for received traps | 1.3.6.1.4.1.6296.101.23.51.12.2.62 | IpAddress | read-write | current |
| sleGponProfile2OnuControlSnmpTrapHostPort OBJECT-TYPE Host address for received traps | 1.3.6.1.4.1.6296.101.23.51.12.2.63 | Integer32 (0 | 1..65535) | read-write | current |
| sleGponProfile2OnuControlSnmpSysName OBJECT-TYPE An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. | 1.3.6.1.4.1.6296.101.23.51.12.2.64 | OCTET STRING | read-write | current |
| sleGponProfile2OnuNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.12.3 | |||
| sleGponProfile2OnuUni OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.13 | |||
| sleGponProfile2OnuUniTable OBJECT-TYPE sleGponProfile2OnuUniTable | 1.3.6.1.4.1.6296.101.23.51.13.1 | not-accessible | current | |
| sleGponProfile2OnuUniEntry OBJECT-TYPE key: sleGponProfile2OnuIndex, sleGponProfile2OnuUniId, sleGponProfile2OnuUniType | 1.3.6.1.4.1.6296.101.23.51.13.1.1 | not-accessible | current | |
| sleGponProfile2OnuUniId OBJECT-TYPE The UNI configuration : UNI Id | 1.3.6.1.4.1.6296.101.23.51.13.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2OnuUniType OBJECT-TYPE The UNI configuration : UNI type | 1.3.6.1.4.1.6296.101.23.51.13.1.1.2 | INTEGER {eth(1)} | read-only | current |
| sleGponProfile2OnuUniDownSir OBJECT-TYPE The UNI configuration : rate-limit downstream SIR | 1.3.6.1.4.1.6296.101.23.51.13.1.1.3 | Integer32 | read-only | current |
| sleGponProfile2OnuUniDownPir OBJECT-TYPE The UNI configuration : rate-limit downstream PIR | 1.3.6.1.4.1.6296.101.23.51.13.1.1.4 | Integer32 | read-only | current |
| sleGponProfile2OnuUniVlanDsOper OBJECT-TYPE VLAN Tagging Operation Data : DS VLAN Tagging Operation mode | 1.3.6.1.4.1.6296.101.23.51.13.1.1.5 | INTEGER {keep(1), overwrite(2), add(3), remove(4), unused(255)} | read-only | current |
| sleGponProfile2OnuUniVlanUSOper OBJECT-TYPE VLAN Tagging Operation Data : US VLAN Tagging Operation mode | 1.3.6.1.4.1.6296.101.23.51.13.1.1.6 | INTEGER {keep(1), overwrite(2), add(3), unused(255)} | read-only | current |
| sleGponProfile2OnuUniVlanUsOperVID OBJECT-TYPE US VLAN tag VID value | 1.3.6.1.4.1.6296.101.23.51.13.1.1.7 | Integer32 (0 | 1..4096) | read-only | current |
| sleGponProfile2OnuUniVlanUsOperCoS OBJECT-TYPE US VLAN tag COS value | 1.3.6.1.4.1.6296.101.23.51.13.1.1.8 | Integer32 (-1 | 0..7) | read-only | current |
| sleGponProfile2OnuUniIgmpMaxGroup OBJECT-TYPE The maximum number of IGMP groups | 1.3.6.1.4.1.6296.101.23.51.13.1.1.9 | Integer32 (-1 | 0..255) | read-only | current |
| sleGponProfile2OnuUniPortAdmin OBJECT-TYPE The port's admin-status. | 1.3.6.1.4.1.6296.101.23.51.13.1.1.10 | INTEGER {enable(1), disable(2), unknown(255)} | read-only | current |
| sleGponProfile2OnuUniControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.13.2 | |||
| sleGponProfile2OnuUniControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.13.2.1 | INTEGER {setUniRateLimit(1), setUniVlanDsOper(2), setUniVlanUsOper(3), setUniIgmpMaxGroup(4), setUniPortAdmin(5)} | read-write | current |
| sleGponProfile2OnuUniControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.13.2.2 | SleControlStatusType | read-only | current |
| sleGponProfile2OnuUniControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.13.2.3 | Gauge32 | read-write | current |
| sleGponProfile2OnuUniControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.13.2.4 | TimeTicks | read-only | current |
| sleGponProfile2OnuUniControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.13.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfile2OnuUniControlOnuProfile OBJECT-TYPE The ONU profile name | 1.3.6.1.4.1.6296.101.23.51.13.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2OnuUniControlId OBJECT-TYPE The UNI configuration : UNI Id | 1.3.6.1.4.1.6296.101.23.51.13.2.7 | Integer32 | read-write | current |
| sleGponProfile2OnuUniControlType OBJECT-TYPE The UNI configuration : UNI type | 1.3.6.1.4.1.6296.101.23.51.13.2.8 | INTEGER {eth(1)} | read-write | current |
| sleGponProfile2OnuUniControlDownSir OBJECT-TYPE The UNI configuration : rate-limit downstream SIR | 1.3.6.1.4.1.6296.101.23.51.13.2.9 | Integer32 | read-write | current |
| sleGponProfile2OnuUniControlDownPir OBJECT-TYPE The UNI configuration : rate-limit downstream PIR | 1.3.6.1.4.1.6296.101.23.51.13.2.10 | Integer32 | read-write | current |
| sleGponProfile2OnuUniControlVlanDsOper OBJECT-TYPE VLAN Tagging Operation Data : DS VLAN Tagging Operation mode | 1.3.6.1.4.1.6296.101.23.51.13.2.11 | INTEGER {keep(1), overwrite(2), add(3), remove(4), unused(255)} | read-write | current |
| sleGponProfile2OnuUniControlVlanUsOper OBJECT-TYPE VLAN Tagging Operation Data : US VLAN Tagging Operation mode | 1.3.6.1.4.1.6296.101.23.51.13.2.12 | INTEGER {keep(1), overwrite(2), add(3), unused(255)} | read-write | current |
| sleGponProfile2OnuUniControlVlanUsOperVID OBJECT-TYPE US VLAN tag VID value | 1.3.6.1.4.1.6296.101.23.51.13.2.13 | Integer32 (0 | 1..4096) | read-write | current |
| sleGponProfile2OnuUniControlVlanUsOperCoS OBJECT-TYPE US VLAN tag COS value | 1.3.6.1.4.1.6296.101.23.51.13.2.14 | Integer32 (-1 | 0..7) | read-write | current |
| sleGponProfile2OnuUniControlIgmpMaxGroup OBJECT-TYPE The maximum number of IGMP groups | 1.3.6.1.4.1.6296.101.23.51.13.2.15 | Integer32 (-1 | 0..255) | read-write | current |
| sleGponProfile2OnuUniControlPortAdmin OBJECT-TYPE The port's admin-status. | 1.3.6.1.4.1.6296.101.23.51.13.2.16 | INTEGER {enable(1), disable(2), unknown(3)} | read-write | current |
| sleGponProfile2OnuUniNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.13.3 | |||
| sleGponProfile2PM OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.14 | |||
| sleGponProfile2PMProfileTable OBJECT-TYPE sleGponProfile2PMProfileTable | 1.3.6.1.4.1.6296.101.23.51.14.1 | not-accessible | current | |
| sleGponProfile2PMProfileEntry OBJECT-TYPE key: sleGponProfile2PMProfileIndex | 1.3.6.1.4.1.6296.101.23.51.14.1.1 | not-accessible | current | |
| sleGponProfile2PMProfileIndex OBJECT-TYPE The PM profile Index | 1.3.6.1.4.1.6296.101.23.51.14.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2PMProfileName OBJECT-TYPE The Performace Monitoring profile name. | 1.3.6.1.4.1.6296.101.23.51.14.1.1.2 | OCTET STRING | read-only | current |
| sleGponProfile2PMProfilePMGemPort OBJECT-TYPE The Gemport block counter : enable|disable | 1.3.6.1.4.1.6296.101.23.51.14.1.1.3 | EnableFlag | read-only | current |
| sleGponProfile2PMProfilePMAniPort OBJECT-TYPE The ANI port counter : enable|disable | 1.3.6.1.4.1.6296.101.23.51.14.1.1.4 | EnableFlag | read-only | current |
| sleGponProfile2PMProfilePMUniEthFrameUp OBJECT-TYPE The Performace Monitoring: UNI Ethernet frame up | 1.3.6.1.4.1.6296.101.23.51.14.1.1.5 | EnableFlag | read-only | current |
| sleGponProfile2PMProfilePMUniEthFrameDown OBJECT-TYPE The Performace Monitoring: UNI Ethernet frame down | 1.3.6.1.4.1.6296.101.23.51.14.1.1.6 | EnableFlag | read-only | current |
| sleGponProfile2PMProfilePMUniEth3 OBJECT-TYPE The Performace Monitoring: UNI Ethernet 3 flag | 1.3.6.1.4.1.6296.101.23.51.14.1.1.7 | EnableFlag | read-only | current |
| sleGponProfile2PMProfilePMPseduowire OBJECT-TYPE The Pseudowire PM history data counter | 1.3.6.1.4.1.6296.101.23.51.14.1.1.8 | EnableFlag | read-only | current |
| sleGponProfile2PMProfilePMUniCes OBJECT-TYPE Thr UNI CES PM history data counter | 1.3.6.1.4.1.6296.101.23.51.14.1.1.9 | EnableFlag | read-only | current |
| sleGponProfile2PMProfilePMGemNCTP OBJECT-TYPE Thr UNI CES PM history data counter | 1.3.6.1.4.1.6296.101.23.51.14.1.1.10 | EnableFlag | read-only | current |
| sleGponProfile2PMProfileControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.14.2 | |||
| sleGponProfile2PMProfileControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.14.2.1 | INTEGER {addPmProfile(1), delPmProfile(2), updatePmProfile(3)} | read-write | current |
| sleGponProfile2PMProfileControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.14.2.2 | SleControlStatusType | read-only | current |
| sleGponProfile2PMProfileControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.14.2.3 | Gauge32 | read-write | current |
| sleGponProfile2PMProfileControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.14.2.4 | TimeTicks | read-only | current |
| sleGponProfile2PMProfileControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.14.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfile2PMProfileControlName OBJECT-TYPE The Performace Monitoring profile name. | 1.3.6.1.4.1.6296.101.23.51.14.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2PMProfileControlPMGemPort OBJECT-TYPE The Gemport block counter : enable|disable | 1.3.6.1.4.1.6296.101.23.51.14.2.7 | EnableFlag | read-write | current |
| sleGponProfile2PMProfileControlPMAniPort OBJECT-TYPE The ANI port counter : enable|disable | 1.3.6.1.4.1.6296.101.23.51.14.2.8 | EnableFlag | read-write | current |
| sleGponProfile2PMProfileControlPMUniEthFrameUp OBJECT-TYPE The Performace Monitoring: UNI Ethernet frame up | 1.3.6.1.4.1.6296.101.23.51.14.2.9 | EnableFlag | read-write | current |
| sleGponProfile2PMProfileControlPMUniEthFrameDown OBJECT-TYPE The Performace Monitoring: UNI Ethernet frame down | 1.3.6.1.4.1.6296.101.23.51.14.2.10 | EnableFlag | read-write | current |
| sleGponProfile2PMProfileControlPMUniEth3 OBJECT-TYPE The Performace Monitoring: UNI Ethernet 3 flag | 1.3.6.1.4.1.6296.101.23.51.14.2.11 | EnableFlag | read-write | current |
| sleGponProfile2PMProfileControlPMPseduowire OBJECT-TYPE The Pseudowire PM history data counter | 1.3.6.1.4.1.6296.101.23.51.14.2.12 | EnableFlag | read-write | current |
| sleGponProfile2PMProfileControlPMUniCes OBJECT-TYPE Thr UNI CES PM history data counter | 1.3.6.1.4.1.6296.101.23.51.14.2.13 | EnableFlag | read-write | current |
| sleGponProfile2PMProfileControlPMGemNCTP OBJECT-TYPE Thr UNI CES PM history data counter | 1.3.6.1.4.1.6296.101.23.51.14.2.14 | EnableFlag | read-write | current |
| sleGponProfile2PMProfileNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.14.3 | |||
| sleGponProfile2OnuBridge OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.15 | |||
| sleGponProfile2OnuBridgeTable OBJECT-TYPE sleGponProfile2OnuBridgeTable | 1.3.6.1.4.1.6296.101.23.51.15.1 | not-accessible | current | |
| sleGponProfile2OnuBridgeEntry OBJECT-TYPE key: sleGponProfile2OnuIndex, sleGponProfile2OnuBridgeId | 1.3.6.1.4.1.6296.101.23.51.15.1.1 | not-accessible | current | |
| sleGponProfile2OnuBridgeId OBJECT-TYPE The MAC bridge id of Onu profile. | 1.3.6.1.4.1.6296.101.23.51.15.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2OnuBridgeMaxHost OBJECT-TYPE The max-host of MAC bridge. | 1.3.6.1.4.1.6296.101.23.51.15.1.1.2 | Integer32 (-1 | 0..255) | read-only | current |
| sleGponProfile2OnuBridgeControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.15.2 | |||
| sleGponProfile2OnuBridgeControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.15.2.1 | INTEGER {setMaxHost(1)} | read-write | current |
| sleGponProfile2OnuBridgeControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.15.2.2 | SleControlStatusType | read-only | current |
| sleGponProfile2OnuBridgeControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.15.2.3 | Gauge32 | read-write | current |
| sleGponProfile2OnuBridgeControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.15.2.4 | TimeTicks | read-only | current |
| sleGponProfile2OnuBridgeControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.15.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfile2OnuBridgeControlOnuProfile OBJECT-TYPE The ONU profile name. | 1.3.6.1.4.1.6296.101.23.51.15.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2OnuBridgeControlId OBJECT-TYPE The MAC bridge id of Onu profile. | 1.3.6.1.4.1.6296.101.23.51.15.2.7 | Integer32 | read-write | current |
| sleGponProfile2OnuBridgeControlMaxHost OBJECT-TYPE The max-host of MAC bridge. | 1.3.6.1.4.1.6296.101.23.51.15.2.8 | Integer32 (-1 | 0..255) | read-write | current |
| sleGponProfile2OnuBridgeNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.15.3 | |||
| sleGponProfile2OnuTcont OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.16 | |||
| sleGponProfile2OnuTcontTable OBJECT-TYPE sleGponProfile2OnuTcontTable | 1.3.6.1.4.1.6296.101.23.51.16.1 | not-accessible | current | |
| sleGponProfile2OnuTcontEntry OBJECT-TYPE key: sleGponProfile2OnuIndex, sleGponProfile2OnuTcontId | 1.3.6.1.4.1.6296.101.23.51.16.1.1 | not-accessible | current | |
| sleGponProfile2OnuTcontId OBJECT-TYPE The Tcont id of Onu profile. | 1.3.6.1.4.1.6296.101.23.51.16.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2OnuTcontDbaProfile OBJECT-TYPE The DBA profile name. | 1.3.6.1.4.1.6296.101.23.51.16.1.1.2 | OCTET STRING | read-only | current |
| sleGponProfile2OnuTcontControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.16.2 | |||
| sleGponProfile2OnuTcontControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.16.2.1 | INTEGER {setDbaProfile(1)} | read-write | current |
| sleGponProfile2OnuTcontControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.16.2.2 | SleControlStatusType | read-only | current |
| sleGponProfile2OnuTcontControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.16.2.3 | Gauge32 | read-write | current |
| sleGponProfile2OnuTcontControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.16.2.4 | TimeTicks | read-only | current |
| sleGponProfile2OnuTcontControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.16.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfile2OnuTcontControlOnuProfile OBJECT-TYPE The ONU profile name. | 1.3.6.1.4.1.6296.101.23.51.16.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2OnuTcontControlId OBJECT-TYPE The Tcont id of Onu profile. | 1.3.6.1.4.1.6296.101.23.51.16.2.7 | Integer32 | read-write | current |
| sleGponProfile2OnuTcontControlDbaProfile OBJECT-TYPE The DBA profile name. | 1.3.6.1.4.1.6296.101.23.51.16.2.8 | OCTET STRING | read-write | current |
| sleGponProfile2OnuTcontNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.16.3 | |||
| sleGponProfile2IpHost OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.17 | |||
| sleGponProfile2IpHostSvc OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.17.1 | |||
| sleGponProfile2IpHostSvcTable OBJECT-TYPE sleGponProfile2IpHostSvcTable | 1.3.6.1.4.1.6296.101.23.51.17.1.1 | not-accessible | current | |
| sleGponProfile2IpHostSvcEntry OBJECT-TYPE key: sleGponProfile2TrafficIndex, sleGponProfile2IpHostSvcId | 1.3.6.1.4.1.6296.101.23.51.17.1.1.1 | not-accessible | current | |
| sleGponProfile2IpHostSvcId OBJECT-TYPE The IP host service id of GPON profile. | 1.3.6.1.4.1.6296.101.23.51.17.1.1.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2IpHostSvcAddressType OBJECT-TYPE The address type. 0: unused 1: static 2: DHCP | 1.3.6.1.4.1.6296.101.23.51.17.1.1.1.2 | INTEGER {unUsed(0), static(1), dhcp(2)} | read-only | current |
| sleGponProfile2IpHostSvcPriDns OBJECT-TYPE The primary DNS address. | 1.3.6.1.4.1.6296.101.23.51.17.1.1.1.3 | IpAddress | read-only | current |
| sleGponProfile2IpHostSvcSecDns OBJECT-TYPE The second DNS address. | 1.3.6.1.4.1.6296.101.23.51.17.1.1.1.4 | IpAddress | read-only | current |
| sleGponProfile2IpHostSvcVlanFilterMode OBJECT-TYPE The VLAN filter mode 0: unused 1: allow 2: deny | 1.3.6.1.4.1.6296.101.23.51.17.1.1.1.5 | INTEGER {unUsed(0), allow(1), deny(2)} | read-only | current |
| sleGponProfile2IpHostSvcVlanFilter OBJECT-TYPE The VLAN filter name. | 1.3.6.1.4.1.6296.101.23.51.17.1.1.1.6 | OCTET STRING | read-only | current |
| sleGponProfile2IpHostSvcVlanOpDsOperFlag OBJECT-TYPE The VLAN down stream operation flag | 1.3.6.1.4.1.6296.101.23.51.17.1.1.1.7 | INTEGER {unUsed(0), keep(1), overwrite(2), add(3), remove(4)} | read-only | current |
| sleGponProfile2IpHostSvcVlanOpUsOperFlag OBJECT-TYPE The VLAN up stream operation flag | 1.3.6.1.4.1.6296.101.23.51.17.1.1.1.8 | INTEGER {unUsed(0), keep(1), overwrite(2), add(3), remove(4)} | read-only | current |
| sleGponProfile2IpHostSvcVlanOpUsOperVid OBJECT-TYPE The VLAN Up stream operation VID. | 1.3.6.1.4.1.6296.101.23.51.17.1.1.1.9 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2IpHostSvcVlanOpUsOperCos OBJECT-TYPE The VLAN Up stream operation COS. | 1.3.6.1.4.1.6296.101.23.51.17.1.1.1.10 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2IpHostSvcExtVlanName OBJECT-TYPE The Extended vlan name. | 1.3.6.1.4.1.6296.101.23.51.17.1.1.1.11 | OCTET STRING | read-only | current |
| sleGponProfile2Ipv6HostSvcSuppressRs OBJECT-TYPE enable to generates router solicitation (RS) | 1.3.6.1.4.1.6296.101.23.51.17.1.1.1.12 | INTEGER {disable(0), enable(1)} | read-only | current |
| sleGponProfile2Ipv6HostSvcDhcpClient OBJECT-TYPE DHCP operation IPv6 Address | 1.3.6.1.4.1.6296.101.23.51.17.1.1.1.13 | INTEGER {stateless(0), na(1)} | read-only | current |
| sleGponProfile2Ipv6HostSvcPriDns OBJECT-TYPE DHCP operation IPv6 Address | 1.3.6.1.4.1.6296.101.23.51.17.1.1.1.14 | InetAddress | read-only | current |
| sleGponProfile2Ipv6HostSvcSecDns OBJECT-TYPE Secondary DNS Server IPv6 Address | 1.3.6.1.4.1.6296.101.23.51.17.1.1.1.15 | InetAddress | read-only | current |
| sleGponProfile2IpHostSvcControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.17.1.2 | |||
| sleGponProfile2IpHostSvcControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.17.1.2.1 | INTEGER {addIpHostSvc(1), delIpHostSvc(2), setAddressType(3), setDns(4), setVlanFilter(5), setVlanDsOper(6), setVlanUsOper(7), setExtendedVlan(8), setIpv6SuppressRs(9), setIpv6DhcpClient(10), setIpv6Dns(11)} | read-write | current |
| sleGponProfile2IpHostSvcControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.17.1.2.2 | SleControlStatusType | read-only | current |
| sleGponProfile2IpHostSvcControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.17.1.2.3 | Gauge32 | read-write | current |
| sleGponProfile2IpHostSvcControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.17.1.2.4 | TimeTicks | read-only | current |
| sleGponProfile2IpHostSvcControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.17.1.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfile2IpHostSvcControlTName OBJECT-TYPE The Traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.17.1.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2IpHostSvcControlId OBJECT-TYPE The IP host service id of GPON profile. | 1.3.6.1.4.1.6296.101.23.51.17.1.2.7 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2IpHostSvcControlAddressType OBJECT-TYPE The address type. 0: unused 1: static 2: DHCP | 1.3.6.1.4.1.6296.101.23.51.17.1.2.8 | INTEGER {unUsed(0), static(1), dhcp(2)} | read-write | current |
| sleGponProfile2IpHostSvcControlPriDns OBJECT-TYPE The primary DNS address. | 1.3.6.1.4.1.6296.101.23.51.17.1.2.9 | IpAddress | read-write | current |
| sleGponProfile2IpHostSvcControlSecDns OBJECT-TYPE The second DNS address. | 1.3.6.1.4.1.6296.101.23.51.17.1.2.10 | IpAddress | read-write | current |
| sleGponProfile2IpHostSvcControlVlanFilterMode OBJECT-TYPE The VLAN filter mode 0: unused 1: allow 2: deny | 1.3.6.1.4.1.6296.101.23.51.17.1.2.11 | INTEGER {unUsed(0), allow(1), deny(2)} | read-write | current |
| sleGponProfile2IpHostSvcControlVlanFilter OBJECT-TYPE The VLAN filter name. | 1.3.6.1.4.1.6296.101.23.51.17.1.2.12 | OCTET STRING | read-write | current |
| sleGponProfile2IpHostSvcControlVlanOpDsOperFlag OBJECT-TYPE The VLAN down stream operation flag | 1.3.6.1.4.1.6296.101.23.51.17.1.2.13 | INTEGER {unUsed(0), keep(1), overwrite(2), add(3), remove(4)} | read-write | current |
| sleGponProfile2IpHostSvcControlVlanOpUsOperFlag OBJECT-TYPE The VLAN up stream operation flag | 1.3.6.1.4.1.6296.101.23.51.17.1.2.14 | INTEGER {unUsed(0), keep(1), overwrite(2), add(3), remove(4)} | read-write | current |
| sleGponProfile2IpHostSvcControlVlanOpUsOperVid OBJECT-TYPE The VLAN Up stream operation VID. | 1.3.6.1.4.1.6296.101.23.51.17.1.2.15 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2IpHostSvcControlVlanOpUsOperCos OBJECT-TYPE The VLAN Up stream operation COS. | 1.3.6.1.4.1.6296.101.23.51.17.1.2.16 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2IpHostSvcControlExtVlanName OBJECT-TYPE The Extended vlan name. | 1.3.6.1.4.1.6296.101.23.51.17.1.2.17 | OCTET STRING | read-write | current |
| sleGponProfile2Ipv6HostSvcControlSuppressRs OBJECT-TYPE enable to generates router solicitation (RS) | 1.3.6.1.4.1.6296.101.23.51.17.1.2.18 | INTEGER {disable(0), enable(1)} | read-write | current |
| sleGponProfile2Ipv6HostSvcControlDhcpClient OBJECT-TYPE DHCP operation IPv6 Address | 1.3.6.1.4.1.6296.101.23.51.17.1.2.19 | INTEGER {stateless(0), na(1)} | read-write | current |
| sleGponProfile2Ipv6HostSvcControlPriDns OBJECT-TYPE Primary DNS Server IPv6 Address | 1.3.6.1.4.1.6296.101.23.51.17.1.2.20 | InetAddress | read-write | current |
| sleGponProfile2Ipv6HostSvcControlSecDns OBJECT-TYPE Secondary DNS Server IPv6 Address | 1.3.6.1.4.1.6296.101.23.51.17.1.2.21 | InetAddress | read-write | current |
| sleGponProfile2IpHostSvcNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.17.1.3 | |||
| sleGponProfile2IpHostVoip OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.17.2 | |||
| sleGponProfile2IpHostVoipTable OBJECT-TYPE sleGponProfile2IpHostVoipTable | 1.3.6.1.4.1.6296.101.23.51.17.2.1 | not-accessible | current | |
| sleGponProfile2IpHostVoipEntry OBJECT-TYPE sleGponProfile2TrafficIndex, sleGponProfile2IpHostSvcId, sleGponProfile2IpHostVoipId | 1.3.6.1.4.1.6296.101.23.51.17.2.1.1 | not-accessible | current | |
| sleGponProfile2IpHostVoipId OBJECT-TYPE The VoIP id of GPON profile. | 1.3.6.1.4.1.6296.101.23.51.17.2.1.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2IpHostVoipControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.17.2.2 | |||
| sleGponProfile2IpHostVoipControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.17.2.2.1 | INTEGER {addVoipSvc(1), delVoipSvc(2)} | read-write | current |
| sleGponProfile2IpHostVoipControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.17.2.2.2 | SleControlStatusType | read-only | current |
| sleGponProfile2IpHostVoipControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.17.2.2.3 | Gauge32 | read-write | current |
| sleGponProfile2IpHostVoipControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.17.2.2.4 | TimeTicks | read-only | current |
| sleGponProfile2IpHostVoipControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.17.2.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfile2IpHostVoipControlTName OBJECT-TYPE The Traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.17.2.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2IpHostVoipControlIpHostSvcId OBJECT-TYPE The IP host service id of GPON profile. | 1.3.6.1.4.1.6296.101.23.51.17.2.2.7 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2IpHostVoipControlId OBJECT-TYPE The VoIP id of GPON profile. | 1.3.6.1.4.1.6296.101.23.51.17.2.2.8 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2IpHostVoipNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.17.2.3 | |||
| sleGponProfile2IpHostTdm OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.17.3 | |||
| sleGponProfile2IpHostTdmTable OBJECT-TYPE sleGponProfile2IpHostTdmTable | 1.3.6.1.4.1.6296.101.23.51.17.3.1 | not-accessible | current | |
| sleGponProfile2IpHostTdmEntry OBJECT-TYPE key: sleGponProfile2TrafficIndex, sleGponProfile2IpHostSvcId, sleGponProfile2IpHostTdmId | 1.3.6.1.4.1.6296.101.23.51.17.3.1.1 | not-accessible | current | |
| sleGponProfile2IpHostTdmId OBJECT-TYPE The TDM id of GPON profile. | 1.3.6.1.4.1.6296.101.23.51.17.3.1.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2IpHostTdmControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.17.3.2 | |||
| sleGponProfile2IpHostTdmControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.17.3.2.1 | INTEGER {addVoipSvc(1), delVoipSvc(2)} | read-write | current |
| sleGponProfile2IpHostTdmControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.17.3.2.2 | SleControlStatusType | read-only | current |
| sleGponProfile2IpHostTdmControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.17.3.2.3 | Gauge32 | read-write | current |
| sleGponProfile2IpHostTdmControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.17.3.2.4 | TimeTicks | read-only | current |
| sleGponProfile2IpHostTdmControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.17.3.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfile2IpHostTdmControlTName OBJECT-TYPE The Traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.17.3.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2IpHostTdmControlIpHostSvcId OBJECT-TYPE The IP host service id of GPON profile. | 1.3.6.1.4.1.6296.101.23.51.17.3.2.7 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2IpHostTdmControlId OBJECT-TYPE The TDM id of GPON profile. | 1.3.6.1.4.1.6296.101.23.51.17.3.2.8 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2IpHostTdmNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.17.3.3 | |||
| sleGponProfile2Voip OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.18 | |||
| sleGponProfile2VoipSvc OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.18.1 | |||
| sleGponProfile2VoipSvcTable OBJECT-TYPE sleGponProfile2VoipSvcTable | 1.3.6.1.4.1.6296.101.23.51.18.1.1 | not-accessible | current | |
| sleGponProfile2VoipSvcEntry OBJECT-TYPE key: sleGponProfile2TrafficIndex, sleGponProfile2VoipSvcId | 1.3.6.1.4.1.6296.101.23.51.18.1.1.1 | not-accessible | current | |
| sleGponProfile2VoipSvcId OBJECT-TYPE The VoIP service id. | 1.3.6.1.4.1.6296.101.23.51.18.1.1.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2VoipSvcProtocolPort OBJECT-TYPE UDP port in port | 1.3.6.1.4.1.6296.101.23.51.18.1.1.1.2 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2VoipSvcProtocolTos OBJECT-TYPE The UDP port TOS. | 1.3.6.1.4.1.6296.101.23.51.18.1.1.1.3 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2VoipSvcManageMethod OBJECT-TYPE The management method 0: unused 1: omci 2: ippath | 1.3.6.1.4.1.6296.101.23.51.18.1.1.1.4 | INTEGER {unUsed(0), omci(1), ipPath(2)} | read-only | current |
| sleGponProfile2VoipSvcProtocol OBJECT-TYPE The VoIP service protocol 1: sip 2: h248 3: mgcp 255: unused | 1.3.6.1.4.1.6296.101.23.51.18.1.1.1.5 | INTEGER {sip(1), h248(2), mgcp(3), unUsed(255)} | read-only | current |
| sleGponProfile2VoipSvcIppathUrl OBJECT-TYPE The IP path URL. | 1.3.6.1.4.1.6296.101.23.51.18.1.1.1.6 | OCTET STRING | read-only | current |
| sleGponProfile2VoipSvcIppathUser OBJECT-TYPE The IP path user name. | 1.3.6.1.4.1.6296.101.23.51.18.1.1.1.7 | OCTET STRING | read-only | current |
| sleGponProfile2VoipSvcIppathPasswd OBJECT-TYPE The IP path password. | 1.3.6.1.4.1.6296.101.23.51.18.1.1.1.8 | OCTET STRING | read-only | current |
| sleGponProfile2VoipSvcVoipProfile OBJECT-TYPE The VoIP profile name. | 1.3.6.1.4.1.6296.101.23.51.18.1.1.1.9 | OCTET STRING | read-only | current |
| sleGponProfile2VoipSvcProtocolType OBJECT-TYPE The IP protocol type. | 1.3.6.1.4.1.6296.101.23.51.18.1.1.1.10 | INTEGER {tcp(6), udp(17), tlsp(56)} | read-only | current |
| sleGponProfile2VoipSvcControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.18.1.2 | |||
| sleGponProfile2VoipSvcControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.18.1.2.1 | INTEGER {addVoipSvc(1), delVoipSvc(2), setUdpPort(3), setManageMethod(4), setProtocol(5), setIppathUrl(6), setIppathAuth(7), setVoipProfile(8)} | read-write | current |
| sleGponProfile2VoipSvcControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.18.1.2.2 | SleControlStatusType | read-only | current |
| sleGponProfile2VoipSvcControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.18.1.2.3 | Gauge32 | read-write | current |
| sleGponProfile2VoipSvcControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.18.1.2.4 | TimeTicks | read-only | current |
| sleGponProfile2VoipSvcControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.18.1.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfile2VoipSvcControlTName OBJECT-TYPE The Traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.18.1.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2VoipSvcControlId OBJECT-TYPE The VoIP service id. | 1.3.6.1.4.1.6296.101.23.51.18.1.2.7 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2VoipSvcControlProtocolPort OBJECT-TYPE UDP port in port | 1.3.6.1.4.1.6296.101.23.51.18.1.2.8 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2VoipSvcControlProtocolTos OBJECT-TYPE The UDP port TOS. | 1.3.6.1.4.1.6296.101.23.51.18.1.2.9 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2VoipSvcControlManageMethod OBJECT-TYPE The management method 0: unused 1: omci 2: ippath | 1.3.6.1.4.1.6296.101.23.51.18.1.2.10 | INTEGER {unUsed(0), omci(1), ipPath(2)} | read-write | current |
| sleGponProfile2VoipSvcControlProtocol OBJECT-TYPE The VoIP service protocol 1: sip 2: h248 3: mgcp 255: unused | 1.3.6.1.4.1.6296.101.23.51.18.1.2.11 | INTEGER {sip(1), h248(2), mgcp(3), unUsed(255)} | read-write | current |
| sleGponProfile2VoipSvcControlIppathUrl OBJECT-TYPE The IP path URL. | 1.3.6.1.4.1.6296.101.23.51.18.1.2.12 | OCTET STRING | read-write | current |
| sleGponProfile2VoipSvcControlIppathUser OBJECT-TYPE The IP path user name. | 1.3.6.1.4.1.6296.101.23.51.18.1.2.13 | OCTET STRING | read-write | current |
| sleGponProfile2VoipSvcControlIppathPasswd OBJECT-TYPE The IP path password. | 1.3.6.1.4.1.6296.101.23.51.18.1.2.14 | OCTET STRING | read-write | current |
| sleGponProfile2VoipSvcControlVoipProfile OBJECT-TYPE The VoIP profile name. | 1.3.6.1.4.1.6296.101.23.51.18.1.2.15 | OCTET STRING | read-write | current |
| sleGponProfile2VoipSvcControlProtocolType OBJECT-TYPE The IP protocol type. | 1.3.6.1.4.1.6296.101.23.51.18.1.2.16 | INTEGER {tcp(6), udp(17), tlsp(56)} | read-write | current |
| sleGponProfile2VoipSvcNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.18.1.3 | |||
| sleGponProfile2VoipSvcUni OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.18.2 | |||
| sleGponProfile2VoipSvcUniTable OBJECT-TYPE sleGponProfile2VoipSvcUniTable | 1.3.6.1.4.1.6296.101.23.51.18.2.1 | not-accessible | current | |
| sleGponProfile2VoipSvcUniEntry OBJECT-TYPE key: sleGponProfile2TrafficIndex, sleGponProfile2VoipSvcId, sleGponProfile2VoipSvcUniType, sleGponProfile2VoipSvcUniId | 1.3.6.1.4.1.6296.101.23.51.18.2.1.1 | not-accessible | current | |
| sleGponProfile2VoipSvcUniType OBJECT-TYPE The UNI type. | 1.3.6.1.4.1.6296.101.23.51.18.2.1.1.1 | INTEGER {pots(1), isdn(2)} | read-only | current |
| sleGponProfile2VoipSvcUniId OBJECT-TYPE The UNI id. | 1.3.6.1.4.1.6296.101.23.51.18.2.1.1.2 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2VoipSvcUniImpedance OBJECT-TYPE The UNI impedance. | 1.3.6.1.4.1.6296.101.23.51.18.2.1.1.3 | INTEGER {impedance600(0), impedance900(1), impedance750(2), impedance820(3), impedance1050(4)} | read-only | current |
| sleGponProfile2VoipSvcUniTransmissionPath OBJECT-TYPE The transmission path. | 1.3.6.1.4.1.6296.101.23.51.18.2.1.1.4 | INTEGER {fullTime(0), partTime(1)} | read-only | current |
| sleGponProfile2VoipSvcUniGainRx OBJECT-TYPE The UNI gain RX. | 1.3.6.1.4.1.6296.101.23.51.18.2.1.1.5 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2VoipSvcUniGainTx OBJECT-TYPE The UNI gain TX. | 1.3.6.1.4.1.6296.101.23.51.18.2.1.1.6 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2VoipSvcUniHoldOverTime OBJECT-TYPE The hold over time. | 1.3.6.1.4.1.6296.101.23.51.18.2.1.1.7 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2VoipSvcUniControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.18.2.2 | |||
| sleGponProfile2VoipSvcUniControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.18.2.2.1 | INTEGER {addVoipSvcUni(1), delVoipSvcUni(2), setImpedance(3), setTransmissionPath(4), setGain(5), setHoldOverTime(6)} | read-write | current |
| sleGponProfile2VoipSvcUniControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.18.2.2.2 | SleControlStatusType | read-only | current |
| sleGponProfile2VoipSvcUniControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.18.2.2.3 | Gauge32 | read-write | current |
| sleGponProfile2VoipSvcUniControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.18.2.2.4 | TimeTicks | read-only | current |
| sleGponProfile2VoipSvcUniControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.18.2.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfile2VoipSvcUniControlTName OBJECT-TYPE The Traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.18.2.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2VoipSvcUniControlVoipSvcId OBJECT-TYPE The VoIP service id. | 1.3.6.1.4.1.6296.101.23.51.18.2.2.7 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2VoipSvcUniControlType OBJECT-TYPE The UNI type. | 1.3.6.1.4.1.6296.101.23.51.18.2.2.8 | INTEGER {pots(1), isdn(2)} | read-write | current |
| sleGponProfile2VoipSvcUniControlId OBJECT-TYPE The UNI id. | 1.3.6.1.4.1.6296.101.23.51.18.2.2.9 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2VoipSvcUniControlImpedance OBJECT-TYPE The UNI impedance. | 1.3.6.1.4.1.6296.101.23.51.18.2.2.10 | INTEGER {impedance600(0), impedance900(1), impedance750(2), impedance820(3), impedance1050(4)} | read-write | current |
| sleGponProfile2VoipSvcUniControlTransmissionPath OBJECT-TYPE The transmission path. | 1.3.6.1.4.1.6296.101.23.51.18.2.2.11 | INTEGER {fullTime(0), partTime(1)} | read-write | current |
| sleGponProfile2VoipSvcUniControlGainRx OBJECT-TYPE The UNI gain RX. | 1.3.6.1.4.1.6296.101.23.51.18.2.2.12 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2VoipSvcUniControlGainTx OBJECT-TYPE The UNI gain TX. | 1.3.6.1.4.1.6296.101.23.51.18.2.2.13 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2VoipSvcUniControlHoldOverTime OBJECT-TYPE The hold over time. | 1.3.6.1.4.1.6296.101.23.51.18.2.2.14 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2VoipSvcUniNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.18.2.3 | |||
| sleGponProfile2Tdm OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.19 | |||
| sleGponProfile2TdmTable OBJECT-TYPE sleGponProfile2TdmTable | 1.3.6.1.4.1.6296.101.23.51.19.1 | not-accessible | current | |
| sleGponProfile2TdmEntry OBJECT-TYPE key: sleGponProfile2TrafficIndex, sleGponProfile2TdmId | 1.3.6.1.4.1.6296.101.23.51.19.1.1 | not-accessible | current | |
| sleGponProfile2TdmId OBJECT-TYPE The TDM index. | 1.3.6.1.4.1.6296.101.23.51.19.1.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2TdmExpectedType OBJECT-TYPE The expected type. 0: auto 13: ds1 14: e1 16: cDs1E1 | 1.3.6.1.4.1.6296.101.23.51.19.1.1.2 | INTEGER {auto(0), ds1(13), e1(14), cDs1E1(16)} | read-only | current |
| sleGponProfile2TdmFraming OBJECT-TYPE The TDM framing. 1: extendSuperframe(0) 2: superframe(1) 3: unframed(2) 4: g704(3) 5: jtG7604(4) 6: basigG704(5) 7: basigCrc(6) 8: basicTs16(7) 9: basigCrcTs16(8) | 1.3.6.1.4.1.6296.101.23.51.19.1.1.3 | INTEGER {extendSuperframe(0), superframe(1), unframed(2), g704(3), jtG7604(4), basigG704(5), basigCrc(6), basicTs16(7), basigCrcTs16(8)} | read-only | current |
| sleGponProfile2TdmEncoding OBJECT-TYPE The TDM encoding. 1: b8zs(0) 2: ami(1) 3: hdb3(2) 4: b3zs(3) | 1.3.6.1.4.1.6296.101.23.51.19.1.1.4 | INTEGER {b8zs(0), ami(1), hdb3(2), b3zs(3)} | read-only | current |
| sleGponProfile2TdmLineLengthPowerFeed OBJECT-TYPE The line length power feedback. | 1.3.6.1.4.1.6296.101.23.51.19.1.1.5 | INTEGER {ds1Nonpower110(0), ds1Nonpower220(1), ds1Nonpower330(2), ds1Nonpower440(3), ds1Nonpower550(4), ds1Nonpower660(5), ds1Shortpower133(6), ds1Shortpowert266(7), ds1Shortpower399(8), ds1Shortpowert533(9), ds1Shortpowert655(10), ds1Longpowert0(11), ds1Longpowert7dot5(12), ds1Longpowert15(13), ds1Longpowert22dot5(14), ds3powert225(15), ds3powert450(16), lengthMax(17), unUsed(255)} | read-only | current |
| sleGponProfile2TdmDs1Mode OBJECT-TYPE The TDM down stream 1 mode. 1: ds1CpeShort(0) 2: ds1CpeLong(1) 3: ds1NiuCpeNoPower(2) 4: ds1NiuCpewithPower(3) 5: unUsed(255) | 1.3.6.1.4.1.6296.101.23.51.19.1.1.6 | INTEGER {ds1CpeShort(0), ds1CpeLong(1), ds1NiuCpeNoPower(2), ds1NiuCpewithPower(3), unUsed(255)} | read-only | current |
| sleGponProfile2TdmLineType OBJECT-TYPE The TDM line type. 1: other(0) 2: ds3M23(1) 3: ds3Syntran(2) 4: ds3CbitPartity(3) 5: ds3ClearChannel(4) 6: e3Framed(5) 7: e3Plcp(6) | 1.3.6.1.4.1.6296.101.23.51.19.1.1.7 | INTEGER {other(0), ds3M23(1), ds3Syntran(2), ds3CbitPartity(3), ds3ClearChannel(4), e3Framed(5), e3Plcp(6)} | read-only | current |
| sleGponProfile2TdmControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.19.2 | |||
| sleGponProfile2TdmControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.19.2.1 | INTEGER {addtdmPort(1), delTdmPort(2), setExpectedType(3), setFraming(4), setEncoding(5), setLineLengthPowerFeed(6), setDs1Mode(7), setLineType(8)} | read-write | current |
| sleGponProfile2TdmControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.19.2.2 | SleControlStatusType | read-only | current |
| sleGponProfile2TdmControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.19.2.3 | Gauge32 | read-write | current |
| sleGponProfile2TdmControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.19.2.4 | TimeTicks | read-only | current |
| sleGponProfile2TdmControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.19.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfile2TdmControlTName OBJECT-TYPE CES Name | 1.3.6.1.4.1.6296.101.23.51.19.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2TdmControlId OBJECT-TYPE TDM (CES) Port Number | 1.3.6.1.4.1.6296.101.23.51.19.2.7 | Integer32 | read-write | current |
| sleGponProfile2TdmControlExpectedType OBJECT-TYPE CES Port Expected Type Autosense (Default value) DS1 (value 13 : 1.544 Mbit/s local (T-interface) module)) E1 (value 14 : 2.048 Mbit/s local (T-interface) module)) C-DS1/E1 (value 16 : Configurable DS1/E1) | 1.3.6.1.4.1.6296.101.23.51.19.2.8 | INTEGER {auto(0), ds1(1), e1(2), cDs1E1(3)} | read-write | current |
| sleGponProfile2TdmControlFramig OBJECT-TYPE CES Port DS1 Framing | 1.3.6.1.4.1.6296.101.23.51.19.2.9 | INTEGER {extendSuperframe(0), superframe(1), unframed(2), g704(3), jtG7604(4), basigG704(5), basigCrc(6), basicTs16(7), basigCrcTs16(8)} | read-write | current |
| sleGponProfile2TdmControlEncoding OBJECT-TYPE CES Port Encoding for DS1 and DS3 interface | 1.3.6.1.4.1.6296.101.23.51.19.2.10 | INTEGER {b8zs(0), ami(1), hdb3(2), b3zs(3)} | read-write | current |
| sleGponProfile2TdmControlLineLengthPowerFeed OBJECT-TYPE CES Port line length of the twisted pair cable Power Feed Option (db) | 1.3.6.1.4.1.6296.101.23.51.19.2.11 | INTEGER {ds1Nonpower110(0), ds1Nonpower220(1), ds1Nonpower330(2), ds1Nonpower440(3), ds1Nonpower550(4), ds1Nonpower660(5), ds1Nonpower133(6), ds1Nonpower266(7), ds1Nonpower399(8), ds1Nonpower533(9), ds1Nonpower655(10), ds1Longpowert0(11), ds1Longpowert7dot5(12), ds1Longpowert15(13), ds1Longpowert22dot5(14), ds1Longpowert225(15), ds1Longpowert450(16), lengthMax(17), unUsed(255)} | read-write | current |
| sleGponProfile2TdmControlDs1Mode OBJECT-TYPE Select connect CES Port DS1 mode | 1.3.6.1.4.1.6296.101.23.51.19.2.12 | INTEGER {ds1CpeShort(0), ds1CpeLong(1), ds1NiuCpeNoPower(2), ds1NiuCpewithPower(3), unUsed(255)} | read-write | current |
| sleGponProfile2TdmControlLineType OBJECT-TYPE CES Port line type for DS3 for E3 interface | 1.3.6.1.4.1.6296.101.23.51.19.2.13 | INTEGER {other(0), ds3M23(1), ds3Syntran(2), ds3CbitPartity(3), ds3ClearChannel(4), e3Framed(5), e3Plcp(6)} | read-write | current |
| sleGponProfile2TdmNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.19.3 | |||
| sleGponProfile2TdmSvc OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.20 | |||
| sleGponProfile2TdmSvcTable OBJECT-TYPE sleGponProfile2TdmSvcTable | 1.3.6.1.4.1.6296.101.23.51.20.1 | not-accessible | current | |
| sleGponProfile2TdmSvcEntry OBJECT-TYPE key: sleGponProfile2TrafficIndex, sleGponProfile2TdmSvcId, sleGponProfile2IpHostTdmId | 1.3.6.1.4.1.6296.101.23.51.20.1.1 | not-accessible | current | |
| sleGponProfile2TdmSvcId OBJECT-TYPE Select TDM mode | 1.3.6.1.4.1.6296.101.23.51.20.1.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2TdmSvcMode OBJECT-TYPE The TDM service mode. 1: pwMef8(1) 2: pwIp(2) 3: pwMpls(3) 4: pwMplsGem(4) 5: sdh(5) | 1.3.6.1.4.1.6296.101.23.51.20.1.1.2 | INTEGER {pwMef8(1), pwIp(2), pwMpls(3), pwMplsGem(4), sdh(5)} | read-only | current |
| sleGponProfile2TdmSvcTdmPwProfileName OBJECT-TYPE TDM Pseudowire Profile Name | 1.3.6.1.4.1.6296.101.23.51.20.1.1.3 | OCTET STRING | read-only | current |
| sleGponProfile2TdmSvcTimeSlot OBJECT-TYPE The time slot. | 1.3.6.1.4.1.6296.101.23.51.20.1.1.4 | OCTET STRING | read-only | current |
| sleGponProfile2TdmSvcFilterMode OBJECT-TYPE Allow or deny that untagged fowarding operation | 1.3.6.1.4.1.6296.101.23.51.20.1.1.5 | INTEGER {unUsed(0), allow(1), deny(2)} | read-only | current |
| sleGponProfile2TdmSvcFilter OBJECT-TYPE VLAN Tagging Filter Data | 1.3.6.1.4.1.6296.101.23.51.20.1.1.6 | OCTET STRING | read-only | current |
| sleGponProfile2TdmSvcEthDestMac OBJECT-TYPE The Destination MAC address | 1.3.6.1.4.1.6296.101.23.51.20.1.1.7 | OCTET STRING | read-only | current |
| sleGponProfile2TdmSvcEthVid OBJECT-TYPE The Ethernet Flow Tag Policy VID Value | 1.3.6.1.4.1.6296.101.23.51.20.1.1.8 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2TdmSvcEthCoS OBJECT-TYPE The Ethernet Flow Tag Policy COS Value | 1.3.6.1.4.1.6296.101.23.51.20.1.1.9 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2TdmSvcTranPayloadEcid OBJECT-TYPE The Trasmit Payload ECID | 1.3.6.1.4.1.6296.101.23.51.20.1.1.10 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2TdmSvcTranSignallingEcid OBJECT-TYPE The Trasmit Signalling ECID | 1.3.6.1.4.1.6296.101.23.51.20.1.1.11 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2TdmSvcRecvPayloadEcid OBJECT-TYPE The Recive Payload ECID | 1.3.6.1.4.1.6296.101.23.51.20.1.1.12 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2TdmSvcRecvSignallingEcid OBJECT-TYPE The Recive Signalling ECID | 1.3.6.1.4.1.6296.101.23.51.20.1.1.13 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2TdmSvcExpectPayloadEcid OBJECT-TYPE The Expected Payload ECID | 1.3.6.1.4.1.6296.101.23.51.20.1.1.14 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2TdmSvcExpectSignallingEcid OBJECT-TYPE The Expected Signalling ECID | 1.3.6.1.4.1.6296.101.23.51.20.1.1.15 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2TdmSvcProtocolPort OBJECT-TYPE The UDP port number | 1.3.6.1.4.1.6296.101.23.51.20.1.1.16 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2TdmSvcProtocolTos OBJECT-TYPE The UDP TOS value | 1.3.6.1.4.1.6296.101.23.51.20.1.1.17 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2TdmSvcFarEndIpURL OBJECT-TYPE The PW IP mode far end termination IP URL | 1.3.6.1.4.1.6296.101.23.51.20.1.1.18 | OCTET STRING | read-only | current |
| sleGponProfile2TdmSvcMplsLabelIndicator OBJECT-TYPE The MPLS Label stacking situation | 1.3.6.1.4.1.6296.101.23.51.20.1.1.19 | INTEGER {single(0), double(1), unUsed(255)} | read-only | current |
| sleGponProfile2TdmSvcMplsPwDirection OBJECT-TYPE The Inner MPLS direction | 1.3.6.1.4.1.6296.101.23.51.20.1.1.20 | INTEGER {usOnly(0), dsOnly(1), bidirectional(2), unUsed(255)} | read-only | current |
| sleGponProfile2TdmSvcMplsPwLabelUp OBJECT-TYPE The Label of the Inner MPLS pseudowire (Uplink) | 1.3.6.1.4.1.6296.101.23.51.20.1.1.21 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2TdmSvcMplsPwLabelDown OBJECT-TYPE The Label of the Inner MPLS pseudowire (Downlink) | 1.3.6.1.4.1.6296.101.23.51.20.1.1.22 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2TdmSvcMplsPwLabelExp OBJECT-TYPE The Label of the Inner MPLS pseudowire (Expert) | 1.3.6.1.4.1.6296.101.23.51.20.1.1.23 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2TdmSvcMplsPwTunnelDirection OBJECT-TYPE The Outer MPLS direction | 1.3.6.1.4.1.6296.101.23.51.20.1.1.24 | INTEGER {usOnly(0), dsOnly(1), bidirectional(2)} | read-only | current |
| sleGponProfile2TdmSvcMplsPwTunnelLabelUp OBJECT-TYPE The Label of the Outer label for MPLS tunnel (Uplink) | 1.3.6.1.4.1.6296.101.23.51.20.1.1.25 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2TdmSvcMplsPwTunnelLabelDown OBJECT-TYPE The Label of the Outer label for MPLS tunnel (Downlink) | 1.3.6.1.4.1.6296.101.23.51.20.1.1.26 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2TdmSvcMplsPwTunnelLabelExp OBJECT-TYPE The Label of the Outer label for MPLS tunnel (Expert) | 1.3.6.1.4.1.6296.101.23.51.20.1.1.27 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2TdmSvcCesBuffCdvTolerance OBJECT-TYPE sleGponProfile2TdmSvcCesBuffCdvTolerance | 1.3.6.1.4.1.6296.101.23.51.20.1.1.28 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2TdmSvcCesChannelAssociateSignal OBJECT-TYPE sleGponProfile2TdmSvcCesChannelAssociateSignal | 1.3.6.1.4.1.6296.101.23.51.20.1.1.29 | INTEGER {basic(0), e1Cas(1), sfCas(2), ds1EsfCas(3), j2Cas(4), unUsed(255)} | read-only | current |
| sleGponProfile2TdmSvcProtocolType OBJECT-TYPE The IP protocol type. | 1.3.6.1.4.1.6296.101.23.51.20.1.1.30 | INTEGER {tcp(6), udp(17), tlsp(56)} | read-write | current |
| sleGponProfile2TdmSvcControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.20.2 | |||
| sleGponProfile2TdmSvcControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.20.2.1 | INTEGER {addTdmService(1), delTemService(2), setTdmPwProfile(3), setVlanFilter(4), setEthDestMac(5), setEthTagPolicy(6), setTranEcid(7), setRecvEcid(8), setExpectEcid(9), setUdpPort(10), setFarEndIp(11), setMplsLabelIndicator(12), setMplsPwDirection(13), setMplsPwLabel(14), setMplsPwTunnelDirection(15), setMplsPwTunnelLabel(16), setCesBuffCdvTolerance(17), setCesChannelAssociateSignal(18)} | read-write | current |
| sleGponProfile2TdmSvcControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.20.2.2 | SleControlStatusType | read-only | current |
| sleGponProfile2TdmSvcControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.20.2.3 | Gauge32 | read-write | current |
| sleGponProfile2TdmSvcControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.20.2.4 | TimeTicks | read-only | current |
| sleGponProfile2TdmSvcControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.20.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfile2TdmSvcControlTName OBJECT-TYPE TDM Service Name | 1.3.6.1.4.1.6296.101.23.51.20.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2TdmSvcControlTdmId OBJECT-TYPE TDM (CES) Port Number | 1.3.6.1.4.1.6296.101.23.51.20.2.7 | Integer32 | read-write | current |
| sleGponProfile2TdmSvcControlId OBJECT-TYPE TDM Service ID | 1.3.6.1.4.1.6296.101.23.51.20.2.8 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2TdmSvcControlMode OBJECT-TYPE Select TDM mode | 1.3.6.1.4.1.6296.101.23.51.20.2.9 | INTEGER {pwMef8(1), pwIp(2), pwMpls(3), pwMplsGem(4), sdh(5)} | read-write | current |
| sleGponProfile2TdmSvcControlTdmPwProfileName OBJECT-TYPE TDM Pseudowire Profile Name | 1.3.6.1.4.1.6296.101.23.51.20.2.10 | OCTET STRING | read-write | current |
| sleGponProfile2TdmSvcControlTimeSlot OBJECT-TYPE Time slot | 1.3.6.1.4.1.6296.101.23.51.20.2.11 | OCTET STRING | read-write | current |
| sleGponProfile2TdmSvcControlFilterMode OBJECT-TYPE Allow or deny that untagged fowarding operation | 1.3.6.1.4.1.6296.101.23.51.20.2.12 | INTEGER {unUsed(0), allow(1), deny(2)} | read-write | current |
| sleGponProfile2TdmSvcControlFilter OBJECT-TYPE VLAN Tagging Filter Data | 1.3.6.1.4.1.6296.101.23.51.20.2.13 | OCTET STRING | read-write | current |
| sleGponProfile2TdmSvcControlEthDestMac OBJECT-TYPE Destination MAC address | 1.3.6.1.4.1.6296.101.23.51.20.2.14 | OCTET STRING | read-write | current |
| sleGponProfile2TdmSvcControlEthVid OBJECT-TYPE Ethernet Flow Tag Policy VID Value | 1.3.6.1.4.1.6296.101.23.51.20.2.15 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2TdmSvcControlEthCoS OBJECT-TYPE Ethernet Flow Tag Policy COS Value | 1.3.6.1.4.1.6296.101.23.51.20.2.16 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2TdmSvcControlTranPayloadEcid OBJECT-TYPE Trasmit Payload ECID | 1.3.6.1.4.1.6296.101.23.51.20.2.17 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2TdmSvcControlTranSignallingEcid OBJECT-TYPE Trasmit Signalling ECID | 1.3.6.1.4.1.6296.101.23.51.20.2.18 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2TdmSvcControlRecvPayloadEcid OBJECT-TYPE Recive Payload ECID | 1.3.6.1.4.1.6296.101.23.51.20.2.19 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2TdmSvcControlRecvSignallingEcid OBJECT-TYPE Recive Signalling ECID | 1.3.6.1.4.1.6296.101.23.51.20.2.20 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2TdmSvcControlExpectPayloadEcid OBJECT-TYPE Expected Payload ECID | 1.3.6.1.4.1.6296.101.23.51.20.2.21 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2TdmSvcControlExpectSignallingEcid OBJECT-TYPE Expected Signalling ECID | 1.3.6.1.4.1.6296.101.23.51.20.2.22 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2TdmSvcControlProtocolPort OBJECT-TYPE UDP port number | 1.3.6.1.4.1.6296.101.23.51.20.2.23 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2TdmSvcControlProtocolTos OBJECT-TYPE UDP TOS value | 1.3.6.1.4.1.6296.101.23.51.20.2.24 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2TdmSvcControlFarEndIpURL OBJECT-TYPE PW IP mode far end termination IP URL | 1.3.6.1.4.1.6296.101.23.51.20.2.25 | OCTET STRING | read-write | current |
| sleGponProfile2TdmSvcControlMplsLabelIndicator OBJECT-TYPE MPLS Label stacking situation | 1.3.6.1.4.1.6296.101.23.51.20.2.26 | INTEGER {single(0), double(1), unUsed(255)} | read-write | current |
| sleGponProfile2TdmSvcControlMplsPwDirection OBJECT-TYPE Inner MPLS direction | 1.3.6.1.4.1.6296.101.23.51.20.2.27 | INTEGER {usOnly(0), dsOnly(1), bidirectional(2), unUsed(255)} | read-write | current |
| sleGponProfile2TdmSvcControlMplsPwLabelUp OBJECT-TYPE Label of the Inner MPLS pseudowire (Uplink) | 1.3.6.1.4.1.6296.101.23.51.20.2.28 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2TdmSvcControlMplsPwLabelDown OBJECT-TYPE Label of the Inner MPLS pseudowire (Downlink) | 1.3.6.1.4.1.6296.101.23.51.20.2.29 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2TdmSvcControlMplsPwLabelExp OBJECT-TYPE Label of the Inner MPLS pseudowire (Expert) | 1.3.6.1.4.1.6296.101.23.51.20.2.30 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2TdmSvcControlMplsPwTunnelDirection OBJECT-TYPE Outer MPLS direction | 1.3.6.1.4.1.6296.101.23.51.20.2.31 | INTEGER {usOnly(0), dsOnly(1), bidirectional(2)} | read-write | current |
| sleGponProfile2TdmSvcControlMplsPwTunnelLabelUp OBJECT-TYPE Label of the Outer label for MPLS tunnel (Uplink) | 1.3.6.1.4.1.6296.101.23.51.20.2.32 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2TdmSvcControlMplsPwTunnelLabelDown OBJECT-TYPE Label of the Outer label for MPLS tunnel (Downlink) | 1.3.6.1.4.1.6296.101.23.51.20.2.33 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2TdmSvcControlMplsPwTunnelLabelExp OBJECT-TYPE Label of the Outer label for MPLS tunnel (Expert) | 1.3.6.1.4.1.6296.101.23.51.20.2.34 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2TdmSvcControlCesBuffCdvTolerance OBJECT-TYPE sleGponProfile2TdmSvcControlCesBuffCdvTolerance (unused) | 1.3.6.1.4.1.6296.101.23.51.20.2.35 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2TdmSvcControlCesChannelAssociateSignal OBJECT-TYPE sleGponProfile2TdmSvcControlCesChannelAssociateSignal (unused) | 1.3.6.1.4.1.6296.101.23.51.20.2.36 | INTEGER {basic(0), e1Cas(1), sfCas(2), ds1EsfCas(3), j2Cas(4), unUsed(255)} | read-write | current |
| sleGponProfile2TdmSvcControlProtocolType OBJECT-TYPE The IP protocol type. | 1.3.6.1.4.1.6296.101.23.51.20.2.37 | INTEGER {tcp(6), udp(17), tlsp(56)} | read-write | current |
| sleGponProfile2TdmSvcNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.20.3 | |||
| sleGponProfile2BridgeGem OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.21 | |||
| sleGponProfile2BridgeGemTable OBJECT-TYPE sleGponProfile2BridgeGemTable | 1.3.6.1.4.1.6296.101.23.51.21.1 | not-accessible | current | |
| sleGponProfile2BridgeGemEntry OBJECT-TYPE key: sleGponProfile2TrafficIndex, sleGponProfile2BridgeId, sleGponProfile2BridgeGemId | 1.3.6.1.4.1.6296.101.23.51.21.1.1 | not-accessible | current | |
| sleGponProfile2BridgeGemId OBJECT-TYPE The Gem ID | 1.3.6.1.4.1.6296.101.23.51.21.1.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2BridgeGemVlanFilterMode OBJECT-TYPE Allow or deny that untagged fowarding operation | 1.3.6.1.4.1.6296.101.23.51.21.1.1.2 | INTEGER {unUsed(0), allow(1), derny(2)} | read-only | current |
| sleGponProfile2BridgeGemVlanFilter OBJECT-TYPE The Vlan filter. | 1.3.6.1.4.1.6296.101.23.51.21.1.1.3 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2BridgeGemControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.21.2 | |||
| sleGponProfile2BridgeGemControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.21.2.1 | INTEGER {addBridgeGem(1), delBridgeGem(2), setVlanFilter(3)} | read-write | current |
| sleGponProfile2BridgeGemControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.21.2.2 | SleControlStatusType | read-only | current |
| sleGponProfile2BridgeGemControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.21.2.3 | Gauge32 | read-write | current |
| sleGponProfile2BridgeGemControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.21.2.4 | TimeTicks | read-only | current |
| sleGponProfile2BridgeGemControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.21.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfile2BridgeGemControlTName OBJECT-TYPE The Traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.21.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2BridgeGemControlBridgeId OBJECT-TYPE The Bridge ID. | 1.3.6.1.4.1.6296.101.23.51.21.2.7 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2BridgeGemControlId OBJECT-TYPE The Gem ID | 1.3.6.1.4.1.6296.101.23.51.21.2.8 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2BridgeGemControlVlanFilterMode OBJECT-TYPE Allow or deny that untagged fowarding operation | 1.3.6.1.4.1.6296.101.23.51.21.2.9 | INTEGER {unUsed(0), allow(1), derny(2)} | read-write | current |
| sleGponProfile2BridgeGemControlVlanFilter OBJECT-TYPE The VLAN Tagging Filter Data | 1.3.6.1.4.1.6296.101.23.51.21.2.10 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2BridgeGemNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.21.3 | |||
| sleGponProfile2BridgeTdm OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.22 | |||
| sleGponProfile2BridgeTdmTable OBJECT-TYPE sleGponProfile2BridgeTdmTable | 1.3.6.1.4.1.6296.101.23.51.22.1 | not-accessible | current | |
| sleGponProfile2BridgeTdmEntry OBJECT-TYPE key: sleGponProfile2TrafficIndex, sleGponProfile2BridgeId, sleGponProfile2BridgeTdmId | 1.3.6.1.4.1.6296.101.23.51.22.1.1 | not-accessible | current | |
| sleGponProfile2BridgeTdmId OBJECT-TYPE The TDM Service link. | 1.3.6.1.4.1.6296.101.23.51.22.1.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2BridgeTdmControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.22.2 | |||
| sleGponProfile2BridgeTdmControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.22.2.1 | INTEGER {addBridgeTdm(1), delBridgeTdm(2)} | read-write | current |
| sleGponProfile2BridgeTdmControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.22.2.2 | SleControlStatusType | read-only | current |
| sleGponProfile2BridgeTdmControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.22.2.3 | Gauge32 | read-write | current |
| sleGponProfile2BridgeTdmControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.22.2.4 | TimeTicks | read-only | current |
| sleGponProfile2BridgeTdmControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.22.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfile2BridgeTdmControlTName OBJECT-TYPE The Traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.22.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2BridgeTdmControlBridgeId OBJECT-TYPE The Bridge ID. | 1.3.6.1.4.1.6296.101.23.51.22.2.7 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2BridgeTdmControlId OBJECT-TYPE The TDM Service link. | 1.3.6.1.4.1.6296.101.23.51.22.2.8 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2BridgeTdmNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.22.3 | |||
| sleGponProfile2BridgeIpHost OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.23 | |||
| sleGponProfile2BridgeIpHostTable OBJECT-TYPE sleGponProfile2BridgeIpHostTable | 1.3.6.1.4.1.6296.101.23.51.23.1 | not-accessible | current | |
| sleGponProfile2BridgeIpHostEntry OBJECT-TYPE key: sleGponProfile2TrafficIndex, sleGponProfile2BridgeId, sleGponProfile2BridgeIpHostId | 1.3.6.1.4.1.6296.101.23.51.23.1.1 | not-accessible | current | |
| sleGponProfile2BridgeIpHostId OBJECT-TYPE The Host ID | 1.3.6.1.4.1.6296.101.23.51.23.1.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2BridgeIpHostControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.23.2 | |||
| sleGponProfile2BridgeIpHostControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.23.2.1 | INTEGER {addBridgeIpHost(1), delBridgeIpHost(2)} | read-write | current |
| sleGponProfile2BridgeIpHostControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.23.2.2 | SleControlStatusType | read-only | current |
| sleGponProfile2BridgeIpHostControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.23.2.3 | Gauge32 | read-write | current |
| sleGponProfile2BridgeIpHostControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.23.2.4 | TimeTicks | read-only | current |
| sleGponProfile2BridgeIpHostControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.23.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfile2BridgeIpHostControlTName OBJECT-TYPE The Traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.23.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2BridgeIpHostControlBridgeId OBJECT-TYPE The Bridge ID. | 1.3.6.1.4.1.6296.101.23.51.23.2.7 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2BridgeIpHostControlId OBJECT-TYPE The Host ID | 1.3.6.1.4.1.6296.101.23.51.23.2.8 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2BridgeIpHostNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.23.3 | |||
| sleGponProfile2ExtVlan OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.24 | |||
| sleGponProfile2ExtVlanBasic OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.24.1 | |||
| sleGponProfile2ExtVlanTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.1.1 | not-accessible | current | |
| sleGponProfile2ExtVlanEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.1.1.1 | not-accessible | current | |
| sleGponProfile2ExtVlanIndex OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.1.1.1.1 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2ExtVlanName OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.1.1.1.2 | OCTET STRING | read-only | current |
| sleGponProfile2ExtVlanDownStreamMode OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.1.1.1.3 | INTEGER {enable(0), disable(1)} | read-write | current |
| sleGponProfile2ExtVlanDscpToCosMapTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.1.1.1.4 | OCTET STRING | read-only | current |
| sleGponProfile2ExtVlanTpidInput OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.1.1.1.5 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2ExtVlanTpidOutput OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.1.1.1.6 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2ExtVlanControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.24.1.2 | |||
| sleGponProfile2ExtVlanControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.24.1.2.1 | INTEGER {addExtendedVlanProfile(1), delExtendedVlanProfile(2), setDownstreamMode(3), setDscpToCosMapTable(4), setTpid(5)} | read-write | current |
| sleGponProfile2ExtVlanControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.24.1.2.2 | SleControlStatusType | read-only | current |
| sleGponProfile2ExtVlanControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.24.1.2.3 | Gauge32 | read-write | current |
| sleGponProfile2ExtVlanControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.24.1.2.4 | TimeTicks | read-only | current |
| sleGponProfile2ExtVlanControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.24.1.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfile2ExtVlanControlName OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.1.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2ExtVlanControlDownStreamMode OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.1.2.7 | INTEGER {enable(0), disable(1)} | read-write | current |
| sleGponProfile2ExtVlanControlDscpToCosMapTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.1.2.8 | OCTET STRING | read-write | current |
| sleGponProfile2ExtVlanControlTpidInput OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.1.2.9 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2ExtVlanControlTpidOutput OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.1.2.10 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2ExtVlanNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.24.1.3 | |||
| sleGponProfile2ExtVlanTag OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.24.2 | |||
| sleGponProfile2ExtVlanTagTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.1 | not-accessible | current | |
| sleGponProfile2ExtVlanTagEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.1.1 | not-accessible | current | |
| sleGponProfile2ExtVlanTagType OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.1.1.1 | INTEGER {unTaggedFrame(1), singleTaggedFrame(2), doubleTaggedFrame(3)} | read-only | current |
| sleGponProfile2ExtVlanTagIndex OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.1.1.2 | INTEGER (1..65535) | read-only | current |
| sleGponProfile2ExtVlanTagTreatTag OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.1.1.3 | INTEGER {notRemove(0), remove(1), both(2), notMatchDiscardInDs(3)} | read-only | current |
| sleGponProfile2ExtVlanTagTreatInnerCopyVid OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.1.1.4 | INTEGER (0..4094 | 4096 | 4097) | read-only | current |
| sleGponProfile2ExtVlanTagTreatInnerCopyCos OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.1.1.5 | INTEGER (0..7 | 8 | 9 | 10 | 15) | read-only | current |
| sleGponProfile2ExtVlanTagTreatInnerTpidDei OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.1.1.6 | INTEGER {tpidCopyInner(0), tpidCopyOuter(1), tpidOutputDeiCopyInner(2), tpidOutputDeiOuter(3), tpid0x8100(4), tpidReserved(5), tpidOutputDei0(6), tpidOutputDei1(7)} | read-only | current |
| sleGponProfile2ExtVlanTagTreatOuterCopyVid OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.1.1.7 | INTEGER (0..4094 | 4096 | 4097) | read-only | current |
| sleGponProfile2ExtVlanTagTreatOuterCopyCos OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.1.1.8 | INTEGER (0..7 | 8 | 9 | 10 | 15) | read-only | current |
| sleGponProfile2ExtVlanTagTreatOuterTpidDei OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.1.1.9 | INTEGER {tpidCopyInner(0), tpidCopyOuter(1), tpidOutputDeiCopyInner(2), tpidOutputDeiOuter(3), tpid0x8100(4), tpidReserved(5), tpidOutputDei0(6), tpidOutputDei1(7)} | read-only | current |
| sleGponProfile2ExtVlanTagFilterEtherType OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.1.1.10 | INTEGER {unused(0), ipoe(1), pppoe(2), arp(3), ipv6Ipoe(4)} | read-only | current |
| sleGponProfile2ExtVlanTagFilterInnerVid OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.1.1.11 | INTEGER (0..4094 | 4096) | read-only | current |
| sleGponProfile2ExtVlanTagFilterInnerCos OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.1.1.12 | INTEGER (0..7 | 8) | read-only | current |
| sleGponProfile2ExtVlanTagFilterInnerTpidDei OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.1.1.13 | INTEGER {tpidany(0), tpid0x8100(4), tpidInput(5), tpidInputDei0(6), tpidInputDei1(7)} | read-only | current |
| sleGponProfile2ExtVlanTagFilterOuterVid OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.1.1.14 | INTEGER (0..4094 | 4096) | read-only | current |
| sleGponProfile2ExtVlanTagFilterOuterCos OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.1.1.15 | INTEGER (0..7 | 8) | read-only | current |
| sleGponProfile2ExtVlanTagFilterOuterTpidDei OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.1.1.16 | INTEGER {tpidany(0), tpid0x8100(4), tpidInput(5), tpidInputDei0(6), tpidInputDei1(7)} | read-only | current |
| sleGponProfile2ExtVlanTagControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.24.2.2 | |||
| sleGponProfile2ExtVlanTagControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.24.2.2.1 | INTEGER {addExtendedVlanTag(1), delExtendedVlanTag(2), setTreatmentTag(3), setTreatmentInner(4), setTreatmentOuter(5), setFilterEtherType(6), setFilterInner(7), setFilterOuter(8)} | read-write | current |
| sleGponProfile2ExtVlanTagControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.24.2.2.2 | SleControlStatusType | read-only | current |
| sleGponProfile2ExtVlanTagControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.24.2.2.3 | Gauge32 | read-write | current |
| sleGponProfile2ExtVlanTagControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.24.2.2.4 | TimeTicks | read-only | current |
| sleGponProfile2ExtVlanTagControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.24.2.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfile2ExtVlanTagControlName OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2ExtVlanTagControlType OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.2.7 | INTEGER {unTaggedFrame(1), singleTaggedFrame(2), doubleTaggedFrame(3)} | read-write | current |
| sleGponProfile2ExtVlanTagControlIndex OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.2.8 | INTEGER (1..65535) | read-write | current |
| sleGponProfile2ExtVlanTagControlTreatTag OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.2.9 | INTEGER {notRemove(0), remove(1), both(2), notMatchDiscardInDs(3)} | read-write | current |
| sleGponProfile2ExtVlanTagControlTreatInnerCopyVid OBJECT-TYPE (0-4094) | 4096(copy_inner) | 4097(copy_outer) | 1.3.6.1.4.1.6296.101.23.51.24.2.2.10 | INTEGER (0..4094 | 4096 | 4097) | read-write | current |
| sleGponProfile2ExtVlanTagControlTreatInnerCopyCos OBJECT-TYPE (0-7) | 8(copy_inner) | 9(copy_outer)|10(dscpToPbit)15(unused) | 1.3.6.1.4.1.6296.101.23.51.24.2.2.11 | INTEGER (0..7 | 8 | 9 | 10 | 15) | read-write | current |
| sleGponProfile2ExtVlanTagControlTreatInnerTpidDei OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.2.12 | INTEGER {tpidCopyInner(0), tpidCopyOuter(1), tpidOutputDeiCopyInner(2), tpidOutputDeiOuter(3), tpid0x8100(4), tpidReserved(5), tpidOutputDei0(6), tpidOutputDei1(7)} | read-write | current |
| sleGponProfile2ExtVlanTagControlTreatOuterCopyVid OBJECT-TYPE (0-4094) | 4096(copy_inner) | 4097(copy_outer) | 1.3.6.1.4.1.6296.101.23.51.24.2.2.13 | INTEGER (0..4094 | 4096 | 4097) | read-write | current |
| sleGponProfile2ExtVlanTagControlTreatOuterCopyCos OBJECT-TYPE (0-7) | 8(copy_inner) | 9(copy_outer)|10(dscpToPbit)15(unused) | 1.3.6.1.4.1.6296.101.23.51.24.2.2.14 | INTEGER (0..7 | 8 | 9 | 10 | 15) | read-write | current |
| sleGponProfile2ExtVlanTagControlTreatOuterTpidDei OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.2.15 | INTEGER {tpidCopyInner(0), tpidCopyOuter(1), tpidOutputDeiCopyInner(2), tpidOutputDeiOuter(3), tpid0x8100(4), tpidReserved(5), tpidOutputDei0(6), tpidOutputDei1(7)} | read-write | current |
| sleGponProfile2ExtVlanTagControlFilterEtherType OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.2.16 | INTEGER {unused(0), ipoe(1), pppoe(2), arp(3), ipv6Ipoe(4)} | read-write | current |
| sleGponProfile2ExtVlanTagControlFilterInnerVid OBJECT-TYPE (0-4094) | any(4096 | 1.3.6.1.4.1.6296.101.23.51.24.2.2.17 | INTEGER (0..4094 | 4096) | read-write | current |
| sleGponProfile2ExtVlanTagControlFilterInnerCos OBJECT-TYPE (0-7) | 8(any) | 1.3.6.1.4.1.6296.101.23.51.24.2.2.18 | INTEGER (0..7 | 8) | read-write | current |
| sleGponProfile2ExtVlanTagControlFilterInnerTpidDei OBJECT-TYPE 0(Tpidany) | 4(TpidDefault) 5(TpidInput), 6(TpidInputDei0), 7 (TpidInputDei1) | 1.3.6.1.4.1.6296.101.23.51.24.2.2.19 | INTEGER {tpidany(0), tpid0x8100(4), tpidInput(5), tpidInputDei0(6), tpidInputDei1(7)} | read-write | current |
| sleGponProfile2ExtVlanTagControlFilterOuterVid OBJECT-TYPE (0-4094) | any(4096 | 1.3.6.1.4.1.6296.101.23.51.24.2.2.20 | INTEGER (0..4094 | 4096) | read-write | current |
| sleGponProfile2ExtVlanTagControlFilterOuterCos OBJECT-TYPE (0-7) | 8(any) | 1.3.6.1.4.1.6296.101.23.51.24.2.2.21 | INTEGER (0..7 | 8) | read-write | current |
| sleGponProfile2ExtVlanTagControlFilterOuterTpidDei OBJECT-TYPE 0(Tpidany) | 4(TpidDefault) 5(TpidInput), 6(TpidInputDei0), 7 (TpidInputDei1) | 1.3.6.1.4.1.6296.101.23.51.24.2.2.22 | INTEGER {tpidany(0), tpid0x8100(4), tpidInput(5), tpidInputDei0(6), tpidInputDei1(7)} | read-write | current |
| sleGponProfile2ExtVlanTagNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.24.2.3 | |||
| sleGponProfile2MapperGem OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.25 | |||
| sleGponProfile2MapperGemTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.25.1 | not-accessible | current | |
| sleGponProfile2MapperGemEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.25.1.1 | not-accessible | current | |
| sleGponProfile2MapperIndex OBJECT-TYPE The mapper index. | 1.3.6.1.4.1.6296.101.23.51.25.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2MapperGemId OBJECT-TYPE The GEM index. | 1.3.6.1.4.1.6296.101.23.51.25.1.1.2 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2MapperGemRateLimitDownSir OBJECT-TYPE The downstream rate-limit control : SIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.25.1.1.3 | Integer32 | read-only | current |
| sleGponProfile2MapperGemRateLimitDownPir OBJECT-TYPE The downstream rate-limit control : PIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.25.1.1.4 | Integer32 | read-only | current |
| sleGponProfile2MapperGemRateLimitUpSir OBJECT-TYPE The upstream rate-limit control : SIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.25.1.1.5 | Integer32 | read-only | current |
| sleGponProfile2MapperGemRateLimitUpPir OBJECT-TYPE The upstream rate-limit control : PIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.25.1.1.6 | Integer32 | read-only | current |
| sleGponProfile2MapperGemRateLimitProfile OBJECT-TYPE The rate-limit profile name. | 1.3.6.1.4.1.6296.101.23.51.25.1.1.7 | OCTET STRING | read-only | current |
| sleGponProfile2MapperGemControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.25.2 | |||
| sleGponProfile2MapperGemControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.25.2.1 | INTEGER {setGemRateLimit(1), delGemRateLimit(2), setGemRatelimitProfile(3)} | read-write | current |
| sleGponProfile2MapperGemControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.25.2.2 | SleControlStatusType | read-only | current |
| sleGponProfile2MapperGemControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.25.2.3 | Gauge32 | read-write | current |
| sleGponProfile2MapperGemControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.25.2.4 | TimeTicks | read-only | current |
| sleGponProfile2MapperGemControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.25.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfile2MapperGemControlTrafficName OBJECT-TYPE The Traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.25.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2MapperGemControlIndex OBJECT-TYPE The mapper index. | 1.3.6.1.4.1.6296.101.23.51.25.2.7 | Integer32 | read-write | current |
| sleGponProfile2MapperGemControlGemIndex OBJECT-TYPE The GEM index. | 1.3.6.1.4.1.6296.101.23.51.25.2.8 | Integer32 | read-write | current |
| sleGponProfile2MapperGemControlRateLimitDownSir OBJECT-TYPE The downstream rate-limit control : SIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.25.2.9 | Integer32 | read-write | current |
| sleGponProfile2MapperGemControlRateLimitDownPir OBJECT-TYPE The downstream rate-limit control : PIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.25.2.10 | Integer32 | read-write | current |
| sleGponProfile2MapperGemControlRateLimitUpSir OBJECT-TYPE The upstream rate-limit control : SIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.25.2.11 | Integer32 | read-write | current |
| sleGponProfile2MapperGemControlRateLimitUpPir OBJECT-TYPE The upstream rate-limit control : PIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.25.2.12 | Integer32 | read-write | current |
| sleGponProfile2MapperGemControlRateLimitProfile OBJECT-TYPE The rate-limit profile name. | 1.3.6.1.4.1.6296.101.23.51.25.2.13 | OCTET STRING | read-write | current |
| sleGponProfile2MapperGemNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.25.3 | |||
| sleGponProfile2GemNctp OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.26 | |||
| sleGponProfile2GemNctpTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.26.1 | not-accessible | current | |
| sleGponProfile2GemNctpEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.26.1.1 | not-accessible | current | |
| sleGponProfile2GemNctpIndex OBJECT-TYPE The NCTP index. | 1.3.6.1.4.1.6296.101.23.51.26.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2GemNctpServiceId OBJECT-TYPE The NCTP service index. | 1.3.6.1.4.1.6296.101.23.51.26.1.1.2 | Integer32 | read-only | current |
| sleGponProfile2GemNctpServiceType OBJECT-TYPE The NCTP service type | 1.3.6.1.4.1.6296.101.23.51.26.1.1.3 | INTEGER {svcTypeBridge(1), svcTypeIphost(2), svcTypeVRP(3)} | read-write | current |
| sleGponProfile2GemNctpControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.26.2 | |||
| sleGponProfile2GemNctpControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.26.2.1 | INTEGER {addNCTPService(1), delNCTPService(2), setNCTPService(3)} | read-write | current |
| sleGponProfile2GemNctpControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.26.2.2 | SleControlStatusType | read-only | current |
| sleGponProfile2GemNctpControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.26.2.3 | Gauge32 | read-write | current |
| sleGponProfile2GemNctpControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.26.2.4 | TimeTicks | read-only | current |
| sleGponProfile2GemNctpControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.26.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfile2GemNctpControlTname OBJECT-TYPE The Traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.26.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2GemNctpControlIndex OBJECT-TYPE The NCTP index. | 1.3.6.1.4.1.6296.101.23.51.26.2.7 | Integer32 | read-write | current |
| sleGponProfile2GemNctpControlServiceId OBJECT-TYPE The NCTP service index. | 1.3.6.1.4.1.6296.101.23.51.26.2.8 | Integer32 | read-write | current |
| sleGponProfile2GemNctpControlServiceType OBJECT-TYPE The NCTP service type | 1.3.6.1.4.1.6296.101.23.51.26.2.9 | INTEGER {svcTypeBridge(1), svcTypeIphost(2), svcTypeVRP(3)} | read-write | current |
| sleGponProfile2GemNctpNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.26.3 | |||
| sleGponProfile2VideoReturnPathSvc OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.27 | |||
| sleGponProfile2VideoReturnPathSvcTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.27.1 | not-accessible | current | |
| sleGponProfile2VideoReturnPathSvcEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.27.1.1 | not-accessible | current | |
| sleGponProfile2VideoReturnPathSvcIndex OBJECT-TYPE The SVC index. | 1.3.6.1.4.1.6296.101.23.51.27.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2VideoReturnPathSvcMode OBJECT-TYPE The SVC mode. | 1.3.6.1.4.1.6296.101.23.51.27.1.1.2 | INTEGER {mode1VRP256k(0), mode2VRP256k(1), mode2VRP1M(2), mode2VRP3M(3)} | read-only | current |
| sleGponProfile2VideoReturnPathSvcFrequency OBJECT-TYPE The SVC frequency | 1.3.6.1.4.1.6296.101.23.51.27.1.1.3 | Integer32 | read-only | current |
| sleGponProfile2VideoReturnPathSvcPhysical OBJECT-TYPE The SVC physical. | 1.3.6.1.4.1.6296.101.23.51.27.1.1.4 | Bits {vrpStage13(0), vrpStage12(1), vrpStage11(2), vrpStage10(3), vrpStage9(4), vrpStage8(5), vrpStage7(6), vrpStage6(7), vrpDQPSKmode(8)} | read-write | current |
| sleGponProfile2VideoReturnPathSvcControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.27.2 | |||
| sleGponProfile2VideoReturnPathSvcControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.27.2.1 | INTEGER {addVrp(1), delVrp(2), setVrpMode(3), setVrpFrequency(4), setVrpPhysical(5)} | read-write | current |
| sleGponProfile2VideoReturnPathSvcControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.27.2.2 | SleControlStatusType | read-only | current |
| sleGponProfile2VideoReturnPathSvcControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.27.2.3 | Gauge32 | read-write | current |
| sleGponProfile2VideoReturnPathSvcControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.27.2.4 | TimeTicks | read-only | current |
| sleGponProfile2VideoReturnPathSvcControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.27.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfile2VideoReturnPathSvcControlTname OBJECT-TYPE The Traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.27.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2VideoReturnPathSvcControlIndex OBJECT-TYPE The SVC index. | 1.3.6.1.4.1.6296.101.23.51.27.2.7 | Integer32 | read-write | current |
| sleGponProfile2VideoReturnPathSvcControlMode OBJECT-TYPE The SVC mode. | 1.3.6.1.4.1.6296.101.23.51.27.2.8 | INTEGER {mode1VRP256k(0), mode2VRP256k(1), mode2VRP1M(2), mode2VRP3M(3)} | read-write | current |
| sleGponProfile2VideoReturnPathSvcControlFrequency OBJECT-TYPE The SVC frequency | 1.3.6.1.4.1.6296.101.23.51.27.2.9 | Integer32 | read-write | current |
| sleGponProfile2VideoReturnPathSvcControlPhysical OBJECT-TYPE The SVC physical. | 1.3.6.1.4.1.6296.101.23.51.27.2.10 | Bits {vrpStage13(0), vrpStage12(1), vrpStage11(2), vrpStage10(3), vrpStage9(4), vrpStage8(5), vrpStage7(6), vrpStage6(7), vrpDQPSKmode(8)} | read-write | current |
| sleGponProfile2VideoReturnPathSvcNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.27.3 | |||
| sleGponProfile2PortMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.28 | |||
| sleGponProfile2PortMgmtTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.28.1 | not-accessible | current | |
| sleGponProfile2PortMgmtEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.28.1.1 | not-accessible | current | |
| sleGponProfile2PortMgmtSlotId OBJECT-TYPE The Slot ID | 1.3.6.1.4.1.6296.101.23.51.28.1.1.1 | INTEGER {ethernet(1), pots(2), ces(3), video(4)} | read-only | current |
| sleGponProfile2PortMgmtPortId OBJECT-TYPE The Port ID | 1.3.6.1.4.1.6296.101.23.51.28.1.1.2 | Integer32 (1..32) | read-only | current |
| sleGponProfile2PortMgmtMode OBJECT-TYPE The Mgmt mode. 0 : OMCI mode 1 : Non-OMCI mode | 1.3.6.1.4.1.6296.101.23.51.28.1.1.3 | INTEGER {modeOMCI(0), modeNonOMCI(1)} | read-only | current |
| sleGponProfile2PotMgmtVirtualEthNum OBJECT-TYPE Virtual Eth Number | 1.3.6.1.4.1.6296.101.23.51.28.1.1.4 | Integer32 (1..32) | read-only | current |
| sleGponProfile2PortMgmtControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.28.2 | |||
| sleGponProfile2PortMgmtControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.28.2.1 | INTEGER {setPortMgmtMode(1), unsetPortMgmtMode(2)} | read-write | current |
| sleGponProfile2PortMgmtControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.28.2.2 | SleControlStatusType | read-only | current |
| sleGponProfile2PortMgmtControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.28.2.3 | Gauge32 | read-write | current |
| sleGponProfile2PortMgmtControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.28.2.4 | TimeTicks | read-only | current |
| sleGponProfile2PortMgmtControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.28.2.5 | SleControlRequestResultType | read-only | current |
| sleGponProfile2PortMgmtControlTName OBJECT-TYPE The Traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.28.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2PortMgmtControlSlotId OBJECT-TYPE The Slot ID | 1.3.6.1.4.1.6296.101.23.51.28.2.7 | INTEGER {ethernet(1), pots(2), ces(3), video(4)} | read-write | current |
| sleGponProfile2PortMgmtControlPortId OBJECT-TYPE The Port ID | 1.3.6.1.4.1.6296.101.23.51.28.2.8 | Integer32 (1..32) | read-write | current |
| sleGponProfile2PortMgmtControlMode OBJECT-TYPE The Mgmt mode. 0 : OMCI mode 1 : Non-OMCI mode | 1.3.6.1.4.1.6296.101.23.51.28.2.9 | INTEGER {modeOMCI(0), modeNonOMCI(1)} | read-write | current |
| sleGponProfile2PortMgmtControlVirtualEthNum OBJECT-TYPE Virtual Eth Number | 1.3.6.1.4.1.6296.101.23.51.28.2.10 | Integer32 (1..32) | read-write | current |
| sleGponProfile2PortMgmtNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.28.3 | |||
| sleGponProfile2McastAccessList OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.29 | |||
| sleGponProfile2McastAccessListTable OBJECT-TYPE sleGponProfile2McastTable | 1.3.6.1.4.1.6296.101.23.51.29.1 | not-accessible | current | |
| sleGponProfile2McastAccessListEntry OBJECT-TYPE key: sleGponProfile2McastIndex | 1.3.6.1.4.1.6296.101.23.51.29.1.1 | not-accessible | current | |
| sleGponProfile2McastAccessListIndex OBJECT-TYPE The Mcast access-list profile index. | 1.3.6.1.4.1.6296.101.23.51.29.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2McastAccessListName OBJECT-TYPE The Mcast access-list profile name. | 1.3.6.1.4.1.6296.101.23.51.29.1.1.2 | OCTET STRING | read-only | current |
| sleGponProfile2McastAccessListControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.29.2 | |||
| sleGponProfile2McastAccessListControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.29.2.1 | INTEGER {addMcastACL(1), delMcastACL(2)} | read-write | current |
| sleGponProfile2McastAccessListControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.29.2.2 | SleControlStatusType | read-write | current |
| sleGponProfile2McastAccessListControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.29.2.3 | Gauge32 | read-write | current |
| sleGponProfile2McastAccessListControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.29.2.4 | TimeTicks | read-write | current |
| sleGponProfile2McastAccessListControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.29.2.5 | SleControlRequestResultType | read-write | current |
| sleGponProfile2McastAccessListControlName OBJECT-TYPE The Mcast access-list profile name. | 1.3.6.1.4.1.6296.101.23.51.29.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2McastAccessListNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.29.3 | |||
| sleGponProfile2McastAccessListDynamic OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.30 | |||
| sleGponProfile2McastAccessListDynamicTable OBJECT-TYPE sleGponProfile2McastAclTable | 1.3.6.1.4.1.6296.101.23.51.30.1 | not-accessible | current | |
| sleGponProfile2McastAccessListDynamicEntry OBJECT-TYPE key: sleGponProfile2McastIndex, sleGponProfile2McastAclIndex | 1.3.6.1.4.1.6296.101.23.51.30.1.1 | not-accessible | current | |
| sleGponProfile2McastAccessListDynamicIndex OBJECT-TYPE The Mcast access-list dynamic index. | 1.3.6.1.4.1.6296.101.23.51.30.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2McastAccessListDynamicVid OBJECT-TYPE This specific the VLAN carrying the multicast group DS | 1.3.6.1.4.1.6296.101.23.51.30.1.1.2 | Integer32 (0 | 1..4094) | read-write | current |
| sleGponProfile2McastAccessListDynamicDstIpStart OBJECT-TYPE The destination IP range-start. | 1.3.6.1.4.1.6296.101.23.51.30.1.1.3 | IpAddress | read-only | current |
| sleGponProfile2McastAccessListDynamicDstIpEnd OBJECT-TYPE The destination IP range-end | 1.3.6.1.4.1.6296.101.23.51.30.1.1.4 | IpAddress | read-only | current |
| sleGponProfile2McastAccessListDynamicSrcIp OBJECT-TYPE The source IP. | 1.3.6.1.4.1.6296.101.23.51.30.1.1.5 | IpAddress | read-only | current |
| sleGponProfile2McastAccessListDynamicBandwidth OBJECT-TYPE The Imputed group bandwidth | 1.3.6.1.4.1.6296.101.23.51.30.1.1.6 | Integer32 | read-only | current |
| sleGponProfile2McastAccessListDynamicGem OBJECT-TYPE Th GEM port ID | 1.3.6.1.4.1.6296.101.23.51.30.1.1.7 | Integer32 (1..25) | read-only | current |
| sleGponProfile2McastAccessListDynamicCos OBJECT-TYPE The access-list CoS | 1.3.6.1.4.1.6296.101.23.51.30.1.1.8 | Integer32 (0..7) | read-only | current |
| sleGponProfile2McastAccessListDynamicControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.30.2 | |||
| sleGponProfile2McastAccessListDynamicControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.30.2.1 | INTEGER {addMcastAclDynamic(1), delMcastAclDynamic(2)} | read-write | current |
| sleGponProfile2McastAccessListDynamicControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.30.2.2 | SleControlStatusType | read-write | current |
| sleGponProfile2McastAccessListDynamicControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.30.2.3 | Gauge32 | read-write | current |
| sleGponProfile2McastAccessListDynamicControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.30.2.4 | TimeTicks | read-write | current |
| sleGponProfile2McastAccessListDynamicControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.30.2.5 | SleControlRequestResultType | read-write | current |
| sleGponProfile2McastAccessListDynamicControlIndex OBJECT-TYPE The Mcast access-list dynamic index. | 1.3.6.1.4.1.6296.101.23.51.30.2.6 | Integer32 | read-write | current |
| sleGponProfile2McastAccessListDynamicControlVid OBJECT-TYPE This specific the VLAN carrying the multicast group DS | 1.3.6.1.4.1.6296.101.23.51.30.2.7 | Integer32 (0 | 1..4094) | read-write | current |
| sleGponProfile2McastAccessListDynamicControlName OBJECT-TYPE The Mcast profile name. | 1.3.6.1.4.1.6296.101.23.51.30.2.8 | OCTET STRING | read-write | current |
| sleGponProfile2McastAccessListDynamicControlDstIpStart OBJECT-TYPE The destination IP range-start. | 1.3.6.1.4.1.6296.101.23.51.30.2.9 | IpAddress | read-write | current |
| sleGponProfile2McastAccessListDynamicControlDstIpEnd OBJECT-TYPE The destination IP range-end | 1.3.6.1.4.1.6296.101.23.51.30.2.10 | IpAddress | read-write | current |
| sleGponProfile2McastAccessListDynamicControlSrcIp OBJECT-TYPE The source IP. | 1.3.6.1.4.1.6296.101.23.51.30.2.11 | IpAddress | read-write | current |
| sleGponProfile2McastAccessListDynamicControlBandwidth OBJECT-TYPE The Imputed group bandwidth | 1.3.6.1.4.1.6296.101.23.51.30.2.12 | Integer32 | read-write | current |
| sleGponProfile2McastAccessListDynamicControlGem OBJECT-TYPE The GEM port ID | 1.3.6.1.4.1.6296.101.23.51.30.2.13 | Integer32 (1..25) | read-write | current |
| sleGponProfile2McastAccessListDynamicControlCos OBJECT-TYPE The access-list CoS | 1.3.6.1.4.1.6296.101.23.51.30.2.14 | Integer32 (0..7) | read-write | current |
| sleGponProfile2McastAccessListDynamicNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.30.3 | |||
| sleGponProfile2McastAccessListStatic OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.31 | |||
| sleGponProfile2McastAccessListStaticTable OBJECT-TYPE sleGponProfile2McastAclTable | 1.3.6.1.4.1.6296.101.23.51.31.1 | not-accessible | current | |
| sleGponProfile2McastAccessListStaticEntry OBJECT-TYPE key: sleGponProfile2McastIndex, sleGponProfile2McastAclIndex | 1.3.6.1.4.1.6296.101.23.51.31.1.1 | not-accessible | current | |
| sleGponProfile2McastAccessListStaticIndex OBJECT-TYPE The Mcast access-list static index. | 1.3.6.1.4.1.6296.101.23.51.31.1.1.1 | Integer32 (1..65535) | read-only | current |
| sleGponProfile2McastAccessListStaticVid OBJECT-TYPE This specific the VLAN carrying the multicast group DS | 1.3.6.1.4.1.6296.101.23.51.31.1.1.2 | Integer32 (0 | 1..4094) | read-write | current |
| sleGponProfile2McastAccessListStaticDstIpStart OBJECT-TYPE The destination IP range-start. | 1.3.6.1.4.1.6296.101.23.51.31.1.1.3 | IpAddress | read-only | current |
| sleGponProfile2McastAccessListStaticDstIpEnd OBJECT-TYPE The destination IP range-end | 1.3.6.1.4.1.6296.101.23.51.31.1.1.4 | IpAddress | read-only | current |
| sleGponProfile2McastAccessListStaticSrcIp OBJECT-TYPE The source IP. | 1.3.6.1.4.1.6296.101.23.51.31.1.1.5 | IpAddress | read-only | current |
| sleGponProfile2McastAccessListStaticBandwidth OBJECT-TYPE The Imputed group bandwidth | 1.3.6.1.4.1.6296.101.23.51.31.1.1.6 | Integer32 | read-only | current |
| sleGponProfile2McastAccessListStaticGem OBJECT-TYPE Th GEM port ID | 1.3.6.1.4.1.6296.101.23.51.31.1.1.7 | Integer32 (1..25) | read-only | current |
| sleGponProfile2McastAccessListStaticCos OBJECT-TYPE The access-list CoS | 1.3.6.1.4.1.6296.101.23.51.31.1.1.8 | Integer32 (0..7) | read-only | current |
| sleGponProfile2McastAccessListStaticControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.31.2 | |||
| sleGponProfile2McastAccessListStaticControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.31.2.1 | INTEGER {addMcastAclStatic(1), delMcastAclStatic(2)} | read-write | current |
| sleGponProfile2McastAccessListStaticControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.31.2.2 | SleControlStatusType | read-write | current |
| sleGponProfile2McastAccessListStaticControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.31.2.3 | Gauge32 | read-write | current |
| sleGponProfile2McastAccessListStaticControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.31.2.4 | TimeTicks | read-write | current |
| sleGponProfile2McastAccessListStaticControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.31.2.5 | SleControlRequestResultType | read-write | current |
| sleGponProfile2McastAccessListStaticControlIndex OBJECT-TYPE The Mcast access-list static index. | 1.3.6.1.4.1.6296.101.23.51.31.2.6 | Integer32 | read-write | current |
| sleGponProfile2McastAccessListStaticControlVid OBJECT-TYPE This specific the VLAN carrying the multicast group DS | 1.3.6.1.4.1.6296.101.23.51.31.2.7 | Integer32 (0 | 1..4094) | read-write | current |
| sleGponProfile2McastAccessListStaticControlName OBJECT-TYPE The Mcast profile name. | 1.3.6.1.4.1.6296.101.23.51.31.2.8 | OCTET STRING | read-write | current |
| sleGponProfile2McastAccessListStaticControlDstIpStart OBJECT-TYPE The destination IP range-start. | 1.3.6.1.4.1.6296.101.23.51.31.2.9 | IpAddress | read-write | current |
| sleGponProfile2McastAccessListStaticControlDstIpEnd OBJECT-TYPE The destination IP range-end | 1.3.6.1.4.1.6296.101.23.51.31.2.10 | IpAddress | read-write | current |
| sleGponProfile2McastAccessListStaticControlSrcIp OBJECT-TYPE The source IP. | 1.3.6.1.4.1.6296.101.23.51.31.2.11 | IpAddress | read-write | current |
| sleGponProfile2McastAccessListStaticControlBandwidth OBJECT-TYPE The Imputed group bandwidth | 1.3.6.1.4.1.6296.101.23.51.31.2.12 | Integer32 | read-write | current |
| sleGponProfile2McastAccessListStaticControlGem OBJECT-TYPE The GEM port ID | 1.3.6.1.4.1.6296.101.23.51.31.2.13 | Integer32 (1..25) | read-write | current |
| sleGponProfile2McastAccessListStaticControlCos OBJECT-TYPE The access-list CoS | 1.3.6.1.4.1.6296.101.23.51.31.2.14 | Integer32 (0..7) | read-write | current |
| sleGponProfile2McastAccessListStaticControlNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.31.3 | |||
| sleGponProfile2RateLimit OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.32 | |||
| sleGponProfile2RateLimitTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.32.1 | not-accessible | current | |
| sleGponProfile2RateLimitEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.32.1.1 | not-accessible | current | |
| sleGponProfile2RateLimitIndex OBJECT-TYPE The rate limit index. | 1.3.6.1.4.1.6296.101.23.51.32.1.1.1 | Integer32 (0..65535) | read-only | current |
| sleGponProfile2RateLimitName OBJECT-TYPE The rate limit name. | 1.3.6.1.4.1.6296.101.23.51.32.1.1.2 | OCTET STRING | read-only | current |
| sleGponProfile2RateLimitUpPir OBJECT-TYPE The upload rate-limit control : SIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.32.1.1.3 | Integer32 | read-only | current |
| sleGponProfile2RateLimitUpSir OBJECT-TYPE The upload rate-limit control : SIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.32.1.1.4 | Integer32 | read-only | current |
| sleGponProfile2RateLimitDownPir OBJECT-TYPE The download rate-limit control : PIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.32.1.1.5 | Integer32 | read-only | current |
| sleGponProfile2RateLimitDownSir OBJECT-TYPE The download rate-limit control : SIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.32.1.1.6 | Integer32 | read-only | current |
| sleGponProfile2RateLimitControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.32.2 | |||
| sleGponProfile2RateLimitControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.32.2.1 | INTEGER {addRateLimitProfile(1), delRateLimitProfile(2), setRateLimitProfile(3)} | read-write | current |
| sleGponProfile2RateLimitControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.32.2.2 | SleControlStatusType | read-write | current |
| sleGponProfile2RateLimitControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.32.2.3 | Gauge32 | read-write | current |
| sleGponProfile2RateLimitControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.32.2.4 | TimeTicks | read-write | current |
| sleGponProfile2RateLimitControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.32.2.5 | SleControlRequestResultType | read-write | current |
| sleGponProfile2RateLimitControlName OBJECT-TYPE The rate limit name. | 1.3.6.1.4.1.6296.101.23.51.32.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2RateLimitControlUpPir OBJECT-TYPE The upload rate-limit control : SIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.32.2.7 | Integer32 | read-write | current |
| sleGponProfile2RateLimitControlUpSir OBJECT-TYPE The upload rate-limit control : SIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.32.2.8 | Integer32 | read-write | current |
| sleGponProfile2RateLimitControlDownPir OBJECT-TYPE The download rate-limit control : PIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.32.2.9 | Integer32 | read-write | current |
| sleGponProfile2RateLimitControlDownSir OBJECT-TYPE The download rate-limit control : SIR (Bandwidth in steps of 64Kbps) | 1.3.6.1.4.1.6296.101.23.51.32.2.10 | Integer32 | read-write | current |
| sleGponProfile2RateLimitNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.32.3 | |||
| sleGponProfile2BridgeUniPQ OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.33 | |||
| sleGponProfile2BridgeUniPQTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.33.1 | not-accessible | current | |
| sleGponProfile2BridgeUniPQEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.33.1.1 | not-accessible | current | |
| sleGponProfile2BridgeUniPQId OBJECT-TYPE The Bridge Uni Priority Queue ID | 1.3.6.1.4.1.6296.101.23.51.33.1.1.1 | Integer32 (1..8) | read-only | current |
| sleGponProfile2BridgeUniPQGreenMinThreshold OBJECT-TYPE Green Packet Minimum Threshold (65535: Default Value) | 1.3.6.1.4.1.6296.101.23.51.33.1.1.2 | Integer32 (0..65535) | read-only | current |
| sleGponProfile2BridgeUniPQGreenMaxThreshold OBJECT-TYPE Green Packet Maximum Threshold (65535: Default Value) | 1.3.6.1.4.1.6296.101.23.51.33.1.1.3 | Integer32 (0..65535) | read-only | current |
| sleGponProfile2BridgeUniPQYellowMinThreshold OBJECT-TYPE Yellow Packet Minimum Threshold (65535: Default Value) | 1.3.6.1.4.1.6296.101.23.51.33.1.1.4 | Integer32 (0..65535) | read-only | current |
| sleGponProfile2BridgeUniPQYellowMaxThreshold OBJECT-TYPE Yellow Packet Maximum Threshold (65535: Default Value) | 1.3.6.1.4.1.6296.101.23.51.33.1.1.5 | Integer32 (0..65535) | read-only | current |
| sleGponProfile2BridgeUniPQGreenProbability OBJECT-TYPE Green Packet Probability (255: Default Value) | 1.3.6.1.4.1.6296.101.23.51.33.1.1.6 | Integer32 (0..255) | read-only | current |
| sleGponProfile2BridgeUniPQYellowProbability OBJECT-TYPE Yellow Packet Probability (255: Default Value) | 1.3.6.1.4.1.6296.101.23.51.33.1.1.7 | Integer32 (0..255) | read-only | current |
| sleGponProfile2BridgeUniPQAverageCoefficient OBJECT-TYPE Averaging Coefficient, as described in Floyd and Jacobson (9: Default Value) | 1.3.6.1.4.1.6296.101.23.51.33.1.1.8 | Integer32 (0..255) | read-only | current |
| sleGponProfile2BridgeUniPQDropPrecedence OBJECT-TYPE Drop Precedence Colour Marking | 1.3.6.1.4.1.6296.101.23.51.33.1.1.9 | INTEGER {noMarking(0), internalMarking(1), dei(2), pcp8p0d(3), pcp7p1d(4), pcp6p2d(5), pcp5p3d(6), dscpAfClass(7)} | read-only | current |
| sleGponProfile2BridgeUniPQControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.33.2 | |||
| sleGponProfile2BridgeUniPQControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.33.2.1 | INTEGER {setPQThreshold(1), setPQProbability(2), setPQAverageCoefficient(3), setPQDropPrecedence(4)} | read-write | current |
| sleGponProfile2BridgeUniPQControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.33.2.2 | SleControlStatusType | read-write | current |
| sleGponProfile2BridgeUniPQControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.33.2.3 | Gauge32 | read-write | current |
| sleGponProfile2BridgeUniPQControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.33.2.4 | TimeTicks | read-write | current |
| sleGponProfile2BridgeUniPQControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.33.2.5 | SleControlRequestResultType | read-write | current |
| sleGponProfile2BridgeUniPQControlTName OBJECT-TYPE The Traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.33.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2BridgeUniPQControlBridgeId OBJECT-TYPE The bridge ID. | 1.3.6.1.4.1.6296.101.23.51.33.2.7 | Integer32 (1..65535) | read-write | current |
| sleGponProfile2BridgeUniPQControlType OBJECT-TYPE The Bridge Uni Type. | 1.3.6.1.4.1.6296.101.23.51.33.2.8 | INTEGER {eth(1), virtualEth(2)} | read-write | current |
| sleGponProfile2BridgeUniPQControlUniId OBJECT-TYPE The bridge Uni ID. | 1.3.6.1.4.1.6296.101.23.51.33.2.9 | Integer32 (1..65535) | read-write | current |
| sleGponProfile2BridgeUniPQControlId OBJECT-TYPE The bridge Uni Priority Queue ID. | 1.3.6.1.4.1.6296.101.23.51.33.2.10 | Integer32 (1..8) | read-write | current |
| sleGponProfile2BridgeUniPQControlGreenMinThreshold OBJECT-TYPE Green Packet Minimum Threshold (65535: Default Value) | 1.3.6.1.4.1.6296.101.23.51.33.2.11 | Integer32 (0..65535) | read-write | current |
| sleGponProfile2BridgeUniPQControlGreenMaxThreshold OBJECT-TYPE Green Packet Maximum Threshold (65535: Default Value) | 1.3.6.1.4.1.6296.101.23.51.33.2.12 | Integer32 (0..65535) | read-write | current |
| sleGponProfile2BridgeUniPQControlYellowMinThreshold OBJECT-TYPE Yellow Packet Minimum Threshold (65535: Default Value) | 1.3.6.1.4.1.6296.101.23.51.33.2.13 | Integer32 (0..65535) | read-write | current |
| sleGponProfile2BridgeUniPQControlYellowMaxThreshold OBJECT-TYPE Yellow Packet Maximum Threshold (65535: Default Value) | 1.3.6.1.4.1.6296.101.23.51.33.2.14 | Integer32 (0..65535) | read-write | current |
| sleGponProfile2BridgeUniPQControlGreenProbability OBJECT-TYPE Green Packet Probability (255: Default Value) | 1.3.6.1.4.1.6296.101.23.51.33.2.15 | Integer32 (0..255) | read-write | current |
| sleGponProfile2BridgeUniPQControlYellowProbability OBJECT-TYPE Yellow Packet Probability (255: Default Value) | 1.3.6.1.4.1.6296.101.23.51.33.2.16 | Integer32 (0..255) | read-write | current |
| sleGponProfile2BridgeUniPQControlAverageCoefficient OBJECT-TYPE Averaging Coefficient, as described in Floyd and Jacobson (9: Default Value) | 1.3.6.1.4.1.6296.101.23.51.33.2.17 | Integer32 (0..255) | read-write | current |
| sleGponProfile2BridgeUniPQControlDropPrecedence OBJECT-TYPE Drop Precedence Colour Marking | 1.3.6.1.4.1.6296.101.23.51.33.2.18 | INTEGER {noMarking(0), internalMarking(1), dei(2), pcp8p0d(3), pcp7p1d(4), pcp6p2d(5), pcp5p3d(6), dscpAfClass(7)} | read-write | current |
| sleGponProfile2BridgeUniPQNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.33.3 | |||
| sleGponProfile2TcontPQ OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.34 | |||
| sleGponProfile2TcontPQTable OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.34.1 | not-accessible | current | |
| sleGponProfile2TcontPQEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.34.1.1 | not-accessible | current | |
| sleGponProfile2TcontPQId OBJECT-TYPE The Tcont Priority Queue ID | 1.3.6.1.4.1.6296.101.23.51.34.1.1.1 | Integer32 (1..8) | read-only | current |
| sleGponProfile2TcontPQGreenMinThreshold OBJECT-TYPE Green Packet Minimum Threshold (65535: Default Value) | 1.3.6.1.4.1.6296.101.23.51.34.1.1.2 | Integer32 (0..65535) | read-only | current |
| sleGponProfile2TcontPQGreenMaxThreshold OBJECT-TYPE Green Packet Maximum Threshold (65535: Default Value) | 1.3.6.1.4.1.6296.101.23.51.34.1.1.3 | Integer32 (0..65535) | read-only | current |
| sleGponProfile2TcontPQYellowMinThreshold OBJECT-TYPE Yellow Packet Minimum Threshold (65535: Default Value) | 1.3.6.1.4.1.6296.101.23.51.34.1.1.4 | Integer32 (0..65535) | read-only | current |
| sleGponProfile2TcontPQYellowMaxThreshold OBJECT-TYPE Yellow Packet Maximum Threshold (65535: Default Value) | 1.3.6.1.4.1.6296.101.23.51.34.1.1.5 | Integer32 (0..65535) | read-only | current |
| sleGponProfile2TcontPQGreenProbability OBJECT-TYPE Green Packet Probability (255: Default Value) | 1.3.6.1.4.1.6296.101.23.51.34.1.1.6 | Integer32 (0..255) | read-only | current |
| sleGponProfile2TcontPQYellowProbability OBJECT-TYPE Yellow Packet Probability (255: Default Value) | 1.3.6.1.4.1.6296.101.23.51.34.1.1.7 | Integer32 (0..255) | read-only | current |
| sleGponProfile2TcontPQAverageCoefficient OBJECT-TYPE Averaging Coefficient, as described in Floyd and Jacobson (9: Default Value) | 1.3.6.1.4.1.6296.101.23.51.34.1.1.8 | Integer32 (0..255) | read-only | current |
| sleGponProfile2TcontPQDropPrecedence OBJECT-TYPE Drop Precedence Colour Marking | 1.3.6.1.4.1.6296.101.23.51.34.1.1.9 | INTEGER {noMarking(0), internalMarking(1), dei(2), pcp8p0d(3), pcp7p1d(4), pcp6p2d(5), pcp5p3d(6), dscpAfClass(7)} | read-only | current |
| sleGponProfile2TcontPQControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.34.2 | |||
| sleGponProfile2TcontPQControlRequest OBJECT-TYPE The request of a user command | 1.3.6.1.4.1.6296.101.23.51.34.2.1 | INTEGER {setPQThreshold(1), setPQProbability(2), setPQAverageCoefficient(3), setPQDropPrecedence(4)} | read-write | current |
| sleGponProfile2TcontPQControlStatus OBJECT-TYPE The status of user command | 1.3.6.1.4.1.6296.101.23.51.34.2.2 | SleControlStatusType | read-write | current |
| sleGponProfile2TcontPQControlTimer OBJECT-TYPE The maximum time for the manager for a long running user command | 1.3.6.1.4.1.6296.101.23.51.34.2.3 | Gauge32 | read-write | current |
| sleGponProfile2TcontPQControlTimeStamp OBJECT-TYPE The time stamp of the last command(end of command) | 1.3.6.1.4.1.6296.101.23.51.34.2.4 | TimeTicks | read-write | current |
| sleGponProfile2TcontPQControlReqResult OBJECT-TYPE The result of the last user command | 1.3.6.1.4.1.6296.101.23.51.34.2.5 | SleControlRequestResultType | read-write | current |
| sleGponProfile2TcontPQControlTName OBJECT-TYPE The Traffic profile name. | 1.3.6.1.4.1.6296.101.23.51.34.2.6 | OCTET STRING | read-write | current |
| sleGponProfile2TcontPQTcontId OBJECT-TYPE The T-cont ID | 1.3.6.1.4.1.6296.101.23.51.34.2.7 | Integer32 (1..65535) | read-write | current |
| sleGponProfile2TcontPQControlId OBJECT-TYPE The bridge Uni Priority Queue ID. | 1.3.6.1.4.1.6296.101.23.51.34.2.8 | Integer32 (1..8) | read-write | current |
| sleGponProfile2TcontPQControlGreenMinThreshold OBJECT-TYPE Green Packet Minimum Threshold (65535: Default Value) | 1.3.6.1.4.1.6296.101.23.51.34.2.9 | Integer32 (0..65535) | read-write | current |
| sleGponProfile2TcontPQControlGreenMaxThreshold OBJECT-TYPE Green Packet Maximum Threshold (65535: Default Value) | 1.3.6.1.4.1.6296.101.23.51.34.2.10 | Integer32 (0..65535) | read-write | current |
| sleGponProfile2TcontPQControlYellowMinThreshold OBJECT-TYPE Yellow Packet Minimum Threshold (65535: Default Value) | 1.3.6.1.4.1.6296.101.23.51.34.2.11 | Integer32 (0..65535) | read-write | current |
| sleGponProfile2TcontPQControlYellowMaxThreshold OBJECT-TYPE Yellow Packet Maximum Threshold (65535: Default Value) | 1.3.6.1.4.1.6296.101.23.51.34.2.12 | Integer32 (0..65535) | read-write | current |
| sleGponProfile2TcontPQControlGreenProbability OBJECT-TYPE Green Packet Probability (255: Default Value) | 1.3.6.1.4.1.6296.101.23.51.34.2.13 | Integer32 (0..255) | read-write | current |
| sleGponProfile2TcontPQControlYellowProbability OBJECT-TYPE Yellow Packet Probability (255: Default Value) | 1.3.6.1.4.1.6296.101.23.51.34.2.14 | Integer32 (0..255) | read-write | current |
| sleGponProfile2TcontPQControlAverageCoefficient OBJECT-TYPE Averaging Coefficient, as described in Floyd and Jacobson (9: Default Value) | 1.3.6.1.4.1.6296.101.23.51.34.2.15 | Integer32 (0..255) | read-write | current |
| sleGponProfile2TcontPQControlDropPrecedence OBJECT-TYPE Drop Precedence Colour Marking | 1.3.6.1.4.1.6296.101.23.51.34.2.16 | INTEGER {noMarking(0), internalMarking(1), dei(2), pcp8p0d(3), pcp7p1d(4), pcp6p2d(5), pcp5p3d(6), dscpAfClass(7)} | read-write | current |
| copyOfsleGponProfile2BridgeUniPQNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.34.3 | |||
| sleGponProfile2Base OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.100 | |||
| sleGponProfile2BaseInfo OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.100.1 | |||
| sleGponProfile2BaseOnuProfileCount OBJECT-TYPE The GPON profile count | 1.3.6.1.4.1.6296.101.23.51.100.1.1 | Integer32 | read-only | current |
| sleGponProfile2BaseDbaProfileCount OBJECT-TYPE The DBA profile count | 1.3.6.1.4.1.6296.101.23.51.100.1.2 | Integer32 | read-only | current |
| sleGponProfile2BaseMcastProfileCount OBJECT-TYPE The Multicast operation profile count | 1.3.6.1.4.1.6296.101.23.51.100.1.3 | Integer32 | read-only | current |
| sleGponProfile2BaseMcastAclProfileCount OBJECT-TYPE The multicast access list profile count | 1.3.6.1.4.1.6296.101.23.51.100.1.4 | Integer32 | read-only | current |
| sleGponProfile2BaseExtVlanProfileCount OBJECT-TYPE The extended vlan tagging operation profile count | 1.3.6.1.4.1.6296.101.23.51.100.1.5 | Integer32 | read-only | current |
| sleGponProfile2BaseVoipProfileCount OBJECT-TYPE The voip profile count | 1.3.6.1.4.1.6296.101.23.51.100.1.6 | Integer32 | read-only | current |
| sleGponProfile2BasePmProfileCount OBJECT-TYPE The Performance Monitoring profile count | 1.3.6.1.4.1.6296.101.23.51.100.1.7 | Integer32 | read-only | current |
| sleGponProfile2BaseTrafficProfileCount OBJECT-TYPE The traffic profile count | 1.3.6.1.4.1.6296.101.23.51.100.1.8 | Integer32 | read-only | current |
| sleGponProfile2BaseTdmPwProfileCount OBJECT-TYPE The TDM PW profile count | 1.3.6.1.4.1.6296.101.23.51.100.1.9 | Integer32 | read-only | current |
| sleGponProfile2BasePwMetrmsProfileCount OBJECT-TYPE The PW maintenance profile count | 1.3.6.1.4.1.6296.101.23.51.100.1.10 | Integer32 | read-only | current |
| sleGponProfile2BaseRateLimitProfileCount OBJECT-TYPE The rate limit profile count | 1.3.6.1.4.1.6296.101.23.51.100.1.11 | Integer32 | read-only | current |
| sleGponProfile2BaseControl OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.100.2 | |||
| sleGponProfile2BaseNotification OBJECT-IDENTITY | 1.3.6.1.4.1.6296.101.23.51.100.3 |
Notifications
| Name | OID | Status |
|---|---|---|
| sleGponBaseCableDownStatusChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.1.3.1 | current |
| sleGponBaseCableDownRefCntChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.1.3.2 | current |
| sleGponBaseDefaultServiceProfileChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.1.3.3 | current |
| sleGponBasePasswordTypeChanged NOTIFICATION-TYPE setOnuPasswordType | 1.3.6.1.4.1.6296.101.23.1.3.4 | current |
| sleGponBaseOnuRxPowerUpdateTimeChanged NOTIFICATION-TYPE setOnuRxPowerUpdateTime | 1.3.6.1.4.1.6296.101.23.1.3.5 | current |
| sleGponBaseOltMulticastGemChanged NOTIFICATION-TYPE setMulticastGem | 1.3.6.1.4.1.6296.101.23.1.3.6 | current |
| sleGponBaseOltInterworkIgmpSnoopingChanged NOTIFICATION-TYPE setInterworkIgmpSnooping | 1.3.6.1.4.1.6296.101.23.1.3.7 | current |
| sleGponBaseOnuRFPseudowireDstMacChanged NOTIFICATION-TYPE setOnuRFPseudowireDstMac | 1.3.6.1.4.1.6296.101.23.1.3.8 | current |
| sleGponBaseOnuActiveModeChanged NOTIFICATION-TYPE setOnuActiveMode | 1.3.6.1.4.1.6296.101.23.1.3.9 | current |
| sleGponBaseOnuRFPseudowireEthTypeChanged NOTIFICATION-TYPE setOnuRFPseudowireEthType | 1.3.6.1.4.1.6296.101.23.1.3.10 | current |
| sleGponBaseOnuRFPseudowireVlanIdChanged NOTIFICATION-TYPE setOnuRFPseudowireVlanId | 1.3.6.1.4.1.6296.101.23.1.3.11 | current |
| sleGponBaseOltRxPowerUpdateTimeChanged NOTIFICATION-TYPE setOltRxPowerUpdateTime | 1.3.6.1.4.1.6296.101.23.1.3.12 | current |
| sleGponBaseOnuAuthRadiusUserNameChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.1.3.13 | current |
| sleGponBaseOnuAuthRadiusUserPasswordChanged NOTIFICATION-TYPE setOnuAuthRadiusUserPassword | 1.3.6.1.4.1.6296.101.23.1.3.14 | current |
| sleGponBaseOnuVideoStatusUpdateTimeChanged NOTIFICATION-TYPE Notify when user change value of interval time Binding OIDs: sleGponBaseControlRequest sleGponBaseControlTimeStamp sleGponBaseControlReqResult sleGponBaseControlOnuVideoStatusUpdateTime | 1.3.6.1.4.1.6296.101.23.1.3.22 | current |
| sleGponBaseOnuPppoeStatusUpdateTimeChanged NOTIFICATION-TYPE Notify when user change value of interval time Binding OIDs: sleGponBaseControlRequest sleGponBaseControlTimeStamp sleGponBaseControlReqResult sleGponBaseControlOnuPppoeStatusUpdateTime | 1.3.6.1.4.1.6296.101.23.1.3.23 | current |
| sleGponOltDiscoverySerialStarted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.1 | current |
| sleGponOltDiscoverySerialStopped NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.2 | current |
| sleGponOltLinkMaxDistanceChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.3 | current |
| sleGponOltKeyExchangeStarted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.4 | current |
| sleGponOltKeyExchangeStopped NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.5 | current |
| sleGponOltSignalCheckChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.6 | current |
| sleGponOltSignalCheckAutoOnuBlockChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.7 | current |
| sleGponOltDescriptionChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.8 | current |
| sleGponOltAutoToManualChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.9 | current |
| sleGponOltDefaultTcontChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.10 | current |
| sleGponOltDefaultTcontRemoved NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.11 | current |
| sleGponOltDefaultProfileChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.12 | current |
| sleGponOltDefaultProfileRemoved NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.13 | current |
| sleGponOltFecModeUSChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.14 | current |
| sleGponOltFecModeDSChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.15 | current |
| sleGponOltMacAgingTimeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.16 | current |
| sleGponOltTransceiverPortChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.17 | current |
| sleGponOltActivateStatusChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.18 | current |
| sleGponOltProtectionChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.19 | current |
| sleGponOltAuthStatsCleared NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.20 | current |
| sleGponOltOpticParamChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.21 | current |
| sleGponOltSrcMacMonitorChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.22 | current |
| sleGponOltTotalUsBwChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.23 | current |
| sleGponOltMaxOnuCountChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.24 | current |
| sleGponOltAntiSpoofingFilterChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.25 | current |
| sleGponOltBwBEMethodChanged NOTIFICATION-TYPE setBwBEMethod | 1.3.6.1.4.1.6296.101.23.2.3.26 | current |
| sleGponOltDsGemMappingChanged NOTIFICATION-TYPE setDsGemMapping | 1.3.6.1.4.1.6296.101.23.2.3.27 | current |
| sleGponOltFixedTcontCountChanged NOTIFICATION-TYPE setFixedTcontCount | 1.3.6.1.4.1.6296.101.23.2.3.28 | current |
| sleGponOltDynamicTcontCountChanged NOTIFICATION-TYPE setDynamicTcontCount | 1.3.6.1.4.1.6296.101.23.2.3.29 | current |
| sleGponOltPortCountChanged NOTIFICATION-TYPE setPortCount | 1.3.6.1.4.1.6296.101.23.2.3.30 | current |
| sleGponOltDeactiveMonitorStatusChanged NOTIFICATION-TYPE setDeactiveMonitorStatus | 1.3.6.1.4.1.6296.101.23.2.3.31 | current |
| sleGponOltDeactiveMonitorRaisePercentChanged NOTIFICATION-TYPE setDeactiveMonitorRaisePercent | 1.3.6.1.4.1.6296.101.23.2.3.32 | current |
| sleGponOltDeactiveMonitorClearPercentChanged NOTIFICATION-TYPE setDeactiveMonitorClearPercent | 1.3.6.1.4.1.6296.101.23.2.3.33 | current |
| sleGponOltDeactiveMonitorPeriodChanged NOTIFICATION-TYPE setDeactiveMonitorPeriod | 1.3.6.1.4.1.6296.101.23.2.3.34 | current |
| sleGponOltDeactiveMonitorAlarmCleared NOTIFICATION-TYPE clearDeactiveMonitorAlarm | 1.3.6.1.4.1.6296.101.23.2.3.35 | current |
| sleGponOltRegisterd NOTIFICATION-TYPE setOltRegister | 1.3.6.1.4.1.6296.101.23.2.3.36 | current |
| sleGponOltBerUsIntervalChanged NOTIFICATION-TYPE setOltBer | 1.3.6.1.4.1.6296.101.23.2.3.37 | current |
| sleGponOltBerDsIntervalChanged NOTIFICATION-TYPE setOltBer | 1.3.6.1.4.1.6296.101.23.2.3.38 | current |
| sleGponOltBerSfThresholdChanged NOTIFICATION-TYPE setOltBer | 1.3.6.1.4.1.6296.101.23.2.3.39 | current |
| sleGponOltBerSdThresholdChanged NOTIFICATION-TYPE setOltBer | 1.3.6.1.4.1.6296.101.23.2.3.40 | current |
| sleGponOltUsFlowMappingChanged NOTIFICATION-TYPE setUsFlowMapping | 1.3.6.1.4.1.6296.101.23.2.3.41 | current |
| sleGponOltDsQosMappingChanged NOTIFICATION-TYPE setDsQosMapping | 1.3.6.1.4.1.6296.101.23.2.3.42 | current |
| sleGponOltDsQosMappingCleared NOTIFICATION-TYPE clearDsQosMapping | 1.3.6.1.4.1.6296.101.23.2.3.43 | current |
| sleGponOltDsQosMappingModeChanged NOTIFICATION-TYPE setDsQosMappingMode | 1.3.6.1.4.1.6296.101.23.2.3.44 | current |
| sleGponOltAutoOnuBlockContMoveMacChanged NOTIFICATION-TYPE setAutoOnuBlockContMoveMac | 1.3.6.1.4.1.6296.101.23.2.3.45 | current |
| sleGponOltRxPowerUpdateModeChanged NOTIFICATION-TYPE setOltRxPowerUpdateMode | 1.3.6.1.4.1.6296.101.23.2.3.46 | current |
| sleGponOltRxPowerThresholdChanged NOTIFICATION-TYPE setOltRxPowerThreshold | 1.3.6.1.4.1.6296.101.23.2.3.47 | current |
| sleGponOltStormControlThresholdChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.2.3.48 | current |
| sleGponOltStormControlChanged NOTIFICATION-TYPE setOltRxPowerThreshold | 1.3.6.1.4.1.6296.101.23.2.3.49 | current |
| sleGponOltControlOnuAuthControlModeChanged NOTIFICATION-TYPE setOltRxPowerThreshold | 1.3.6.1.4.1.6296.101.23.2.3.50 | current |
| sleGponOltControlOnuAuthReauthenChanged NOTIFICATION-TYPE setOltRxPowerThreshold | 1.3.6.1.4.1.6296.101.23.2.3.51 | current |
| sleGponOltTransceiverTypeChanged NOTIFICATION-TYPE setOltTransceiverType | 1.3.6.1.4.1.6296.101.23.2.3.52 | current |
| sleGponOltOmccRecoveryChanged NOTIFICATION-TYPE setOltOmccRecovery | 1.3.6.1.4.1.6296.101.23.2.3.53 | current |
| sleGponOnuRegistered NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.3.3.1 | current |
| sleGponOnuDeregistered NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.3.3.2 | current |
| sleGponOnuProfileChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.3.3.3 | current |
| sleGponOnuFixed NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.3.3.4 | current |
| sleGponOnuUpgradeNosChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.3.3.5 | current |
| sleGponOnuNosActiveChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.3.3.6 | current |
| sleGponOnuEncModeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.3.3.7 | current |
| sleGponOnuReset NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.3.3.8 | current |
| sleGponOnuTxOffOpticChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.3.3.9 | current |
| sleGponOnuDescriptionChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.3.3.10 | current |
| sleGponOnuFecModeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.3.3.11 | current |
| sleGponOnuIPInfoChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.3.3.12 | current |
| sleGponOnuOmciPingTest NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.3.3.13 | current |
| sleGponOnuActivationChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.3.3.14 | current |
| sleGponOnuPMProfileChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.3.3.15 | current |
| sleGponOnuUpgradeNosPartitionChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.3.3.16 | current |
| sleGponOnuUpgradeNosCommited NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.3.3.17 | current |
| sleGponOnuUpgradeNosActiveChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.3.3.18 | current |
| sleGponOnuBlockChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.3.3.19 | current |
| sleGponOnuUpdateOltRxPowerChanged NOTIFICATION-TYPE sleGponOnuUpdateOltRxPowerChanged | 1.3.6.1.4.1.6296.101.23.3.3.20 | current |
| sleGponOnuSystemInfoUpdated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.3.3.21 | current |
| sleGponOnuTxOnOptic NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.3.3.22 | current |
| sleGponOnuLoopDetectUnblockChanged NOTIFICATION-TYPE setOnuLoopDetectUnblock | 1.3.6.1.4.1.6296.101.23.3.3.23 | current |
| sleGponOnuUserMacCntUpdated NOTIFICATION-TYPE updateOnuUserMacCnt | 1.3.6.1.4.1.6296.101.23.3.3.24 | current |
| sleGponOnuAccountUpdated NOTIFICATION-TYPE updateOnuAccount | 1.3.6.1.4.1.6296.101.23.3.3.25 | current |
| sleGponOnuAccountChanged NOTIFICATION-TYPE setOnuAccount | 1.3.6.1.4.1.6296.101.23.3.3.26 | current |
| sleGponOnuSerialNumberRemoved NOTIFICATION-TYPE removeOnuSerialNumber | 1.3.6.1.4.1.6296.101.23.3.3.27 | current |
| sleGponOnuMgmtIpPathProtocolChanged NOTIFICATION-TYPE removeOnuSerialNumber | 1.3.6.1.4.1.6296.101.23.3.3.28 | current |
| sleGponOnuMgmtIpPathInfoChanged NOTIFICATION-TYPE removeOnuSerialNumber | 1.3.6.1.4.1.6296.101.23.3.3.29 | current |
| sleGponOnuMgmtIpPathCleared NOTIFICATION-TYPE removeOnuSerialNumber | 1.3.6.1.4.1.6296.101.23.3.3.30 | current |
| sleGponOnuServiceModeChanged NOTIFICATION-TYPE setOnuServiceMode | 1.3.6.1.4.1.6296.101.23.3.3.31 | current |
| sleGponOnuServiceModeCleared NOTIFICATION-TYPE clearOnuServiceMode | 1.3.6.1.4.1.6296.101.23.3.3.32 | current |
| sleGponOnuAutoUpgradeModeChanged NOTIFICATION-TYPE setOnuAutoUpgradeMode | 1.3.6.1.4.1.6296.101.23.3.3.33 | current |
| sleGponOnuMibUpload NOTIFICATION-TYPE setOnuMibUpload | 1.3.6.1.4.1.6296.101.23.3.3.34 | current |
| sleGponOnuReconfig NOTIFICATION-TYPE setOnuReconfig | 1.3.6.1.4.1.6296.101.23.3.3.35 | current |
| sleGponOnuRestoreFactoryReset NOTIFICATION-TYPE setOnuRestoreFactoryReset | 1.3.6.1.4.1.6296.101.23.3.3.36 | current |
| sleGponOnuMoveChanged NOTIFICATION-TYPE setOnuMove | 1.3.6.1.4.1.6296.101.23.3.3.37 | current |
| sleGponOnuAuthReauthSpecificChanged NOTIFICATION-TYPE setOnuAuthReauthSpecific | 1.3.6.1.4.1.6296.101.23.3.3.38 | current |
| sleGponOnuRadiusAttributeChanged NOTIFICATION-TYPE setOnuRadiusAttribute | 1.3.6.1.4.1.6296.101.23.3.3.39 | current |
| sleGponOnuPloamReset NOTIFICATION-TYPE setOnuPloamReset | 1.3.6.1.4.1.6296.101.23.3.3.40 | current |
| sleGponTcontCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.4.3.1 | current |
| sleGponTcontDestroyed NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.4.3.2 | current |
| sleGponProfileBaseCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.1.3.1 | current |
| sleGponProfileBaseModified NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.1.3.2 | current |
| sleGponProfileBaseDestroyed NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.1.3.3 | current |
| sleGponProfileTcontProfileChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.1.3.4 | current |
| sleGponProfileBaseVoIPProfileChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.1.3.5 | current |
| sleGponProfilePortRateLimitChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.2.3.1 | current |
| sleGponProfilePortMaxHostChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.2.3.2 | current |
| sleGponProfilePortVlanOperChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.2.3.3 | current |
| sleGponProfilePortVlanFilterChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.2.3.4 | current |
| sleGponProfilePortAdminChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.2.3.5 | current |
| sleGponProfilePortDuplexChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.2.3.6 | current |
| sleGponProfilePortSpeedChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.2.3.7 | current |
| sleGponProfilePorPauseChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.2.3.8 | current |
| sleGponProfileDbaCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.3.3.1 | current |
| sleGponProfileDbaDestroyed NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.3.3.2 | current |
| sleGponProfileDbaChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.3.3.3 | current |
| sleGponProfileMultiTcontProfileCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.4.3.1 | current |
| sleGponProfileMultiTcontProfileDestroyed NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.4.3.2 | current |
| sleGponProfileMultiTcontProfileDscp2PbitChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.4.3.3 | current |
| sleGponProfileMultiTcontProfilePriQWeightChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.4.3.4 | current |
| sleGponProfileMultiTcontProfileGemportChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.4.3.5 | current |
| sleGponProfileVoIPProfileCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.1.3.1 | current |
| sleGponProfileVoIPProfileDestroyed NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.1.3.2 | current |
| sleGponProfilVoIPProfileServiceChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.1.3.3 | current |
| sleGponProfileVoIPProfileOmciChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.1.3.4 | current |
| sleGponProfileVoIPProfileIpwayChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.1.3.5 | current |
| sleGponProfileVoIPOmciSIPAuthChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.2.3.1 | current |
| sleGponProfileVoIPOmciSIPPhoneChnaged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.2.3.2 | current |
| sleGponProfileVoIPOmciMGCTerminationChanged NOTIFICATION-TYPE setMGCTermination | 1.3.6.1.4.1.6296.101.23.5.5.2.3.3 | current |
| sleGponProfileVoIPIpPathInfoChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.3.3.1 | current |
| sleGponProfileVoIPPotsAdded NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.4.3.1 | current |
| sleGponProfileVoIPPotsDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.4.3.2 | current |
| sleGponProfileVoIPDetailProfileCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.1 | current |
| sleGponProfileVoIPDetailProfileDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.2 | current |
| sleGponProfileVoIPDetailFaxModeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.3 | current |
| sleGponProfileVoIPDetailCodec1stChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.4 | current |
| sleGponProfileVoIPDetailCodec2ndChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.5 | current |
| sleGponProfileVoIPDetailCodec3rdChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.6 | current |
| sleGponProfileVoIPDetailCodec4thChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.7 | current |
| sleGponProfileVoIPDetailOobDtmfChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.8 | current |
| sleGponProfileVoIPDetailAnnouncementTypeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.9 | current |
| sleGponProfileVoIPDetailJitterTargetChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.10 | current |
| sleGponProfileVoIPDetailJitterBuffMaxChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.11 | current |
| sleGponProfileVoIPDetailEchoCancelChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.12 | current |
| sleGponProfileVoIPDetailPstnProtoChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.13 | current |
| sleGponProfileVoIPDetailDtmfDigitChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.14 | current |
| sleGponProfileVoIPDetailHookFlashTimeMinChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.15 | current |
| sleGponProfileVoIPDetailHookFlashTimeMaxChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.16 | current |
| sleGponProfileVoIPDetailSignalingCodeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.17 | current |
| sleGponProfileVoIPDetailRtpLocalPortChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.18 | current |
| sleGponProfileVoIPDetailRtpDscpMarkChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.19 | current |
| sleGponProfileVoIPDetailRtpPiggybackEventChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.20 | current |
| sleGponProfileVoIPDetailRtpToneEventChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.21 | current |
| sleGponProfileVoIPDetailRtpDtmfEventChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.22 | current |
| sleGponProfileVoIPDetailRtpCasEventChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.23 | current |
| sleGponProfileVoIPDetailProtocolChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.24 | current |
| sleGponProfileVoIPDetailMgcPriServerChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.25 | current |
| sleGponProfileVoIPDetailMgcSecServerChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.26 | current |
| sleGponProfileVoIPDetailMgcVersionChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.27 | current |
| sleGponProfileVoIPDetailMgcFormatChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.28 | current |
| sleGponProfileVoIPDetailMgcMaxRetryTimeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.29 | current |
| sleGponProfileVoIPDetailMgcRetryAttemptsChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.30 | current |
| sleGponProfileVoIPDetailMgcServiceChangeDelayChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.31 | current |
| sleGponProfileVoIPDetailMgcTerminationIdChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.32 | current |
| sleGponProfileVoIPDetailMgcSoftswitchChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.33 | current |
| sleGponProfileVoIPDetailVoicemailServerChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.34 | current |
| sleGponProfileVoIPDetailVoicemailExpireTimeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.35 | current |
| sleGponProfileVoIPDetailReleaseTimeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.36 | current |
| sleGponProfileVoIPDetailRohTimerChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.37 | current |
| sleGponProfileVoIPDetailProxyServerChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.38 | current |
| sleGponProfileVoIPDetailOutboundProxyServerChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.39 | current |
| sleGponProfileVoIPDetailRegisterServerChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.40 | current |
| sleGponProfileVoIPDetailHostpartServerChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.41 | current |
| sleGponProfileVoIPDetailDnsChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.42 | current |
| sleGponProfileVoIPDetailRegExpTimeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.43 | current |
| sleGponProfileVoIPDetailReregHeadStartTimeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.44 | current |
| sleGponProfileVoIPDetailSoftSwitchChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.45 | current |
| sleGponProfileVoIPDetailSipOptionTransmitCtlChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.46 | current |
| sleGponProfileVoIPDetailSipUriFormatChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.47 | current |
| sleGponProfileVoIPDetailCallerIdChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.48 | current |
| sleGponProfileVoIPDetailCallWaitingChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.49 | current |
| sleGponProfileVoIPDetailCallProgressTransferChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.50 | current |
| sleGponProfileVoIPDetailCallPresentChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.51 | current |
| sleGponProfileVoIPDetailDirectConnectChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.52 | current |
| sleGponProfileVoIPDetailDirectConnectUriChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.53 | current |
| sleGponProfileVoIPDetailBridgedLineAgentUriChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.54 | current |
| sleGponProfileVoIPDetailConferenceFactoryUriChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.55 | current |
| sleGponProfileVoIPDetailCancelCallWaitChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.56 | current |
| sleGponProfileVoIPDetailCallHoldChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.57 | current |
| sleGponProfileVoIPDetailCallParkChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.58 | current |
| sleGponProfileVoIPDetailCallerIdActChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.59 | current |
| sleGponProfileVoIPDetailCallerIdDeactChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.60 | current |
| sleGponProfileVoIPDetailDoNotDisturbActChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.61 | current |
| sleGponProfileVoIPDetailDoNotDisturbDeactChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.62 | current |
| sleGponProfileVoIPDetailDoNotDisturbPinChangeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.63 | current |
| sleGponProfileVoIPDetailEmergServiceNumberChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.64 | current |
| sleGponProfileVoIPDetailIntercomServiceChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.65 | current |
| sleGponProfileVoIPDetailDialPlanCritTimeOutChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.66 | current |
| sleGponProfileVoIPDetailDialPlanPartTimeOutChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.67 | current |
| sleGponProfileVoIPDetailDialPlanFormatChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.5.3.68 | current |
| sleGponProfileVoIPDetailSpecialLineServiceChanged NOTIFICATION-TYPE setSpecialLineService | 1.3.6.1.4.1.6296.101.23.5.5.5.3.69 | current |
| sleGponProfileVoIPDetailThreeWaySSWMixingChanged NOTIFICATION-TYPE setThreeWaySSWMixing | 1.3.6.1.4.1.6296.101.23.5.5.5.3.70 | current |
| sleGponProfileVoIPDetailSIPDNSCacheChanged NOTIFICATION-TYPE setDNSCachePolicy | 1.3.6.1.4.1.6296.101.23.5.5.5.3.71 | current |
| sleGponProfileVoIPDetailSIPTimerChanged NOTIFICATION-TYPE setSIPTimer | 1.3.6.1.4.1.6296.101.23.5.5.5.3.72 | current |
| sleGponProfileVoIPDetailSIPSessionTimerChanged NOTIFICATION-TYPE setSessionTimer | 1.3.6.1.4.1.6296.101.23.5.5.5.3.73 | current |
| sleGponProfileVoIPDetailSIPEndOfDigitChanged NOTIFICATION-TYPE setEndOfDigit | 1.3.6.1.4.1.6296.101.23.5.5.5.3.74 | current |
| sleGponProfileVoIPDetailSIPEndSharpTokenChanged NOTIFICATION-TYPE setEndSharpToken | 1.3.6.1.4.1.6296.101.23.5.5.5.3.75 | current |
| sleGponProfileVoIPDetailDialPlanTableCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.6.3.1 | current |
| sleGponProfileVoIPDetailDialPlanTableDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.5.6.3.2 | current |
| sleGponProfileVoIPServiceMgcMessageChanged NOTIFICATION-TYPE setMgcMessage | 1.3.6.1.4.1.6296.101.23.5.5.7.3.1 | current |
| sleGponServiceProfileModelChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.6.3.1 | current |
| sleGponProfileTdmPwMtProfileCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.1.3.1 | current |
| sleGponProfileTdmPwMtProfileDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.1.3.2 | current |
| sleGponProfileTdmPwMtMaxDepthChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.1.3.3 | current |
| sleGponProfileTdmDesiredDepthChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.1.3.4 | current |
| sleGponProfileTdmFillPolicyChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.1.3.5 | current |
| sleGponProfileTdmMisconnectDeclarePolicyChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.1.3.6 | current |
| sleGponProfileTdmMisconnectClearPolicyChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.1.3.7 | current |
| sleGponProfileTdmLossDeclarePolicyChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.1.3.8 | current |
| sleGponProfileTdmLossClearPolicyChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.1.3.9 | current |
| sleGponProfileTdmBuffUnderrunDeclarePolicyChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.1.3.10 | current |
| sleGponProfileTdmbuffUnderrunClearPolicyChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.1.3.11 | current |
| sleGponProfileTdmMalformedDeclarePolicyChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.1.3.12 | current |
| sleGponProfileTdmMalformedClearPolicyChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.1.3.13 | current |
| sleGponProfileTdmRBitTransmitPolicyChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.1.3.14 | current |
| sleGponProfileTdmRBitReceivePolicyChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.1.3.15 | current |
| sleGponProfileTdmLBitReceivePolicyChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.1.3.16 | current |
| sleGponProfileTdmSesThresholdChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.1.3.17 | current |
| sleGponProfileTdmPwProfileCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.2.3.1 | current |
| sleGponProfileTdmPwProfileDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.2.3.2 | current |
| sleGponProfileTdmPwServiceTypeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.2.3.3 | current |
| sleGponProfileTdmPwSignallingChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.2.3.4 | current |
| sleGponProfileTdmPwPayloadSizeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.2.3.5 | current |
| sleGponProfileTdmPwPayloadEncapsulationDelayChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.2.3.6 | current |
| sleGponProfileTdmPwTimingModeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.2.3.7 | current |
| sleGponProfileTdmPwRtpClockReferenceChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.2.3.8 | current |
| sleGponProfileTdmPwRtpTimeStampmodeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.2.3.9 | current |
| sleGponProfileTdmPwRtpPayloadTypeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.2.3.10 | current |
| sleGponProfileTdmPwRtpSyncSourceChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.2.3.11 | current |
| sleGponProfileTdmPwRtpExpectPayloadTypeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.2.3.12 | current |
| sleGponProfileTdmPwRtpExpectSyncSourceChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.2.3.13 | current |
| sleGponProfileTdmPwMtProfileChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.2.3.14 | current |
| sleGponProfileTdmSdhProfileCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.3.3.1 | current |
| sleGponProfileTdmSdhProfileDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.3.3.2 | current |
| sleGponProfileTdmSdhTuTypeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.3.3.3 | current |
| sleGponProfileTdmSdhGemLossIntergrationPeriodChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.3.3.4 | current |
| sleGponProfileTdmSdhTransmitJ1J2Changed NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.3.3.5 | current |
| sleGponProfileTdmSdhExpectJ1J2Changed NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.3.3.6 | current |
| sleGponProfileTdmSdhreceiveJ1J2Changed NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.3.3.7 | current |
| sleGponProfileTdmSdhTimMonitorChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.3.3.8 | current |
| sleGponProfileTdmSdhTimAisChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.5.7.3.3.9 | current |
| sleGponOltServiceProfileModelChanged NOTIFICATION-TYPE setGponOltServiceProfileModel | 1.3.6.1.4.1.6296.101.23.5.8.3.1 | current |
| sleGponOnuPortAdminChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.6.1.3.1 | current |
| sleGponOnuPortAutoNegoChanged NOTIFICATION-TYPE setOnuPortAutoNego (This OID is not available) | 1.3.6.1.4.1.6296.101.23.6.1.3.2 | current |
| sleGponOnuPortSpeedChanged NOTIFICATION-TYPE setOnuPortSpeed (This OID is not available) | 1.3.6.1.4.1.6296.101.23.6.1.3.3 | current |
| sleGponOnuPortStatisticsCleared NOTIFICATION-TYPE clearOnuPortStats (This OID is not available) | 1.3.6.1.4.1.6296.101.23.6.1.3.4 | current |
| sleGponOnuPortUniDescriptionChanged NOTIFICATION-TYPE setUniDescription | 1.3.6.1.4.1.6296.101.23.6.1.3.5 | current |
| sleGponOnuPortAutoDetectionChanged NOTIFICATION-TYPE setAutoDetection. | 1.3.6.1.4.1.6296.101.23.6.1.3.6 | current |
| sleGponOnuPortMediumModeChanged NOTIFICATION-TYPE setOnuPortMediumMode | 1.3.6.1.4.1.6296.101.23.6.1.3.7 | current |
| sleGponOnuPortLoopbackStatusChanged NOTIFICATION-TYPE setOnuPortLoopbackStatus | 1.3.6.1.4.1.6296.101.23.6.1.3.8 | current |
| sleGponOnuPortOpticModuleInfoUpdated NOTIFICATION-TYPE updateOnuPortOpticModuleInfo. | 1.3.6.1.4.1.6296.101.23.6.1.3.9 | current |
| sleGponOnuPortLinkStatisticsUpdated NOTIFICATION-TYPE updateOnuPortLinkStatisticsInfo | 1.3.6.1.4.1.6296.101.23.6.1.3.10 | current |
| sleGponOnuPortMgmtChanged NOTIFICATION-TYPE updateOnuPortMgmtData | 1.3.6.1.4.1.6296.101.23.6.1.3.11 | current |
| sleGponOnuPortPowrControlChanged NOTIFICATION-TYPE setOnuPortPowerControl | 1.3.6.1.4.1.6296.101.23.6.1.3.12 | current |
| sleGponOnuUserMacOltMacChanged NOTIFICATION-TYPE clearOltMacOne | 1.3.6.1.4.1.6296.101.23.6.2.3.1 | current |
| sleGponOnuUserMacOltMacOnuChanged NOTIFICATION-TYPE clearOltMacOnu | 1.3.6.1.4.1.6296.101.23.6.2.3.2 | current |
| sleGponOnuUserMacOltMacAllChanged NOTIFICATION-TYPE clearOltMacAll | 1.3.6.1.4.1.6296.101.23.6.2.3.3 | current |
| sleGponOnuUserMacOltMacUpdated NOTIFICATION-TYPE updateOltMac | 1.3.6.1.4.1.6296.101.23.6.2.3.4 | current |
| sleGponOnuVoipLineVoipInfoChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.6.5.3.1 | current |
| sleGponOnuAniOpticModuleInfoUpdated NOTIFICATION-TYPE updateOnuAniOpticModuleInfo | 1.3.6.1.4.1.6296.101.23.6.6.3.1 | current |
| sleGponOnuAniOpticModuleInfoTestActionUpdated NOTIFICATION-TYPE updateOnuAniOpticModuleInfoTestAction | 1.3.6.1.4.1.6296.101.23.6.6.3.2 | current |
| sleGponStaticMacCreated NOTIFICATION-TYPE setGponStaticMac | 1.3.6.1.4.1.6296.101.23.6.7.3.1 | current |
| sleGponStaticMacDeleted NOTIFICATION-TYPE deleteGponStaticMac | 1.3.6.1.4.1.6296.101.23.6.7.3.2 | current |
| sleGponOnuVideoAniupdateVideoAniStatusUpdated NOTIFICATION-TYPE updateVideoAniStatus | 1.3.6.1.4.1.6296.101.23.6.8.3.1 | current |
| sleGponOnuVideoAniControlVideoAniArcChanged NOTIFICATION-TYPE setVideoAniAgc | 1.3.6.1.4.1.6296.101.23.6.8.3.2 | current |
| sleGponOnuPppoeStatusUpdated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.6.10.3.1 | current |
| sleGponOltStatsCleared NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.7.1.5.1 | current |
| sleGponOltActivationStatsCleared NOTIFICATION-TYPE clearGponOltActivationStatistics | 1.3.6.1.4.1.6296.101.23.7.1.5.2 | current |
| sleGponOltOnuStatsCleared NOTIFICATION-TYPE clearGponOltOnuStatistics | 1.3.6.1.4.1.6296.101.23.7.1.5.3 | current |
| sleGponOltAlarmStatsCleared NOTIFICATION-TYPE clearGponOltAlarmStatistics | 1.3.6.1.4.1.6296.101.23.7.1.5.4 | current |
| sleGponOnuPMStatsCleared NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.7.2.3.1 | current |
| sleGponOnuPMStatsCurrentDetailChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.7.2.3.2 | current |
| sleGponOnuIgmpPmStatisticsPmDataChanged NOTIFICATION-TYPE updateOnuIgmpPmData | 1.3.6.1.4.1.6296.101.23.7.5.3.1 | current |
| sleGponOnuIgmpPmStatisticsPmDataCleared NOTIFICATION-TYPE clearOnuIgmpPmData | 1.3.6.1.4.1.6296.101.23.7.5.3.2 | current |
| sleGponOnuPmStatsUniAvgUpdated NOTIFICATION-TYPE updateAvgStats | 1.3.6.1.4.1.6296.101.23.7.6.3.1 | current |
| sleGponFirmwareUpgradeProfileChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.8.3.1 | current |
| sleGponFirmwareDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.8.3.2 | current |
| sleGponFirmwareDownloadChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.8.3.3 | current |
| sleGponOnuFWAutoUpgradeModeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.9.1.3.1 | current |
| sleGponOnuFWAutoUpgradeVersionMatchChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.9.1.3.2 | current |
| sleGponOnuFWAutoUpgradeInvalidVersionMatchChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.9.1.3.3 | current |
| sleGponOnuFWAutoUpgradeStartEndTimeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.9.2.3.1 | current |
| sleGponOnuFWAutoUpgradeRebootTimeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.9.2.3.2 | current |
| sleGponOnuFWAutoUpgradeModelProfileChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.9.3.3.1 | current |
| sleGponOnuFWAutoUpgradeModelDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.9.3.3.2 | current |
| sleGponOnuFWAutoUpgradeModelModifyTargetVer NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.9.3.3.3 | current |
| sleGponOnuFWAutoUpgradeModelTargetVerDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.9.3.3.4 | current |
| sleGponOnuFWAutoUpgradeMTimeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.9.4.3.1 | current |
| sleGponOnuFWAutoUpgradeMTimeDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.9.4.3.2 | current |
| sleGponOnuFWAutoUpgradeMTimeRebootTimeChanged NOTIFICATION-TYPE setRebootTime | 1.3.6.1.4.1.6296.101.23.9.4.3.3 | current |
| sleGponOnuFWAutoUpgradeBaseRetryCountChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.9.6.3.1 | current |
| gponOntFwDownloaded NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.10.4.1 | current |
| gponOntFwUpgraded NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.10.4.2 | current |
| gponOntFwOntReseted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.10.4.3 | current |
| gponOntFwDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.10.4.4 | current |
| gponOntFwDeleteAll NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.10.4.5 | current |
| sleGponRedGroupChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.11.3.1 | current |
| sleGponRedGroupCleared NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.11.3.2 | current |
| sleGponRedGroupForceSwitchovered NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.11.3.3 | current |
| sleGponRedGroupStandbyOpticChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.11.3.4 | current |
| sleGponRedGroupSlaveAdminStatusChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.11.3.5 | current |
| sleGponRedGroupTriggerChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.11.3.6 | current |
| sleGponRedGroupSafeSwitchOverChanged NOTIFICATION-TYPE setGponRedSafeSwitchover | 1.3.6.1.4.1.6296.101.23.11.3.7 | current |
| sleGponRedGroupDbSyncCheckChanged NOTIFICATION-TYPE setGponRedDbSyncCheck | 1.3.6.1.4.1.6296.101.23.11.3.8 | current |
| sleGponRedGroupDbResyncChanged NOTIFICATION-TYPE setGponRedDbResync | 1.3.6.1.4.1.6296.101.23.11.3.9 | current |
| sleGponRedGroupStandbyActTriggerTimeChanged NOTIFICATION-TYPE setGponRedStandbyActTriggerTime | 1.3.6.1.4.1.6296.101.23.11.3.10 | current |
| sleGponOnuHostIPInfoChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.12.3.1 | current |
| sleGponOnuHostInfoChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.12.3.2 | current |
| sleGponOnuHostIpv6InfoChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.12.3.3 | current |
| sleGponOnuHostPppoeAccountChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.12.3.4 | current |
| sleGponIgmpGroupChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.13.3.1 | current |
| sleGponAntiSpoofingAntiSpoofingStatusChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.14.3.1 | current |
| sleGponAntiSpoofingAntiSpoofingOltCleared NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.14.3.2 | current |
| sleGponAntiSpoofingAntiSpoofingOnuCleared NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.14.3.3 | current |
| sleGponAntiSpoofingAntiSpoofingOneCleared NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.14.3.4 | current |
| sleGponVlanGemMappingChagned NOTIFICATION-TYPE sleGponVlanGemMappingControlRequest, sleGponVlanGemMappingControlTimeStamp, sleGponVlanGemMappingControlReqResult, sleGponVlanGemMappingControlOltId, sleGponVlanGemMappingControlOnuId, sleGponVlanGemMappingControlVid, sleGponVlanGemMappingControlMapperId, sleGponVlanGemMappingControlVidTo | 1.3.6.1.4.1.6296.101.23.15.3.1 | current |
| sleGponVlanGemMappingCleared NOTIFICATION-TYPE sleGponVlanGemMappingControlRequest, sleGponVlanGemMappingControlTimeStamp, sleGponVlanGemMappingControlReqResult, sleGponVlanGemMappingControlOltId, sleGponVlanGemMappingControlOnuId, sleGponVlanGemMappingControlVid, sleGponVlanGemMappingControlMapperId, sleGponVlanGemMappingControlVidTo | 1.3.6.1.4.1.6296.101.23.15.3.2 | current |
| sleGponOnuVlanGemMappingCleared NOTIFICATION-TYPE clearOnuVlanGemMapping | 1.3.6.1.4.1.6296.101.23.15.3.3 | current |
| sleGponOltVlanGemMappingCleared NOTIFICATION-TYPE clearOltVlanGemMapping | 1.3.6.1.4.1.6296.101.23.15.3.4 | current |
| sleGponOnuMcastAclCreated NOTIFICATION-TYPE createMcastAcl | 1.3.6.1.4.1.6296.101.23.17.1.3.1 | current |
| sleGponOnuMcastAclCleared NOTIFICATION-TYPE clearMcastAcl | 1.3.6.1.4.1.6296.101.23.17.1.3.2 | current |
| sleGponOnuMcastAclOnuCleared NOTIFICATION-TYPE clearMcastAclOnu | 1.3.6.1.4.1.6296.101.23.17.1.3.3 | current |
| sleGponOnuMcastAclOltCleared NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.17.1.3.4 | current |
| sleGponFlowMappingMethodChanged NOTIFICATION-TYPE setFlowMappingMethod | 1.3.6.1.4.1.6296.101.23.18.1.3.1 | current |
| sleGponFlowMappingMethodCleared NOTIFICATION-TYPE clearFlowMappingMethod | 1.3.6.1.4.1.6296.101.23.18.1.3.2 | current |
| sleGponFlowMappingMethodOltCleared NOTIFICATION-TYPE clearFlowMappingMethodOlt | 1.3.6.1.4.1.6296.101.23.18.1.3.3 | current |
| sleGponOnuMacUpdated NOTIFICATION-TYPE updateOnuMac | 1.3.6.1.4.1.6296.101.23.19.3.1 | current |
| sleGponOnuMacFilterChanged NOTIFICATION-TYPE setOnuMacFilter | 1.3.6.1.4.1.6296.101.23.20.3.1 | current |
| sleGponOnuMacFilterDeleted NOTIFICATION-TYPE setOnuMacFilter | 1.3.6.1.4.1.6296.101.23.20.3.2 | current |
| sleGponOnuMcastAccessListAdded NOTIFICATION-TYPE addMcastACL | 1.3.6.1.4.1.6296.101.23.21.3.1 | current |
| sleGponOnuMcastAccessListDeleted NOTIFICATION-TYPE delMcastACL | 1.3.6.1.4.1.6296.101.23.21.3.2 | current |
| sleGponOnuMcastAccessListOnuDeleted NOTIFICATION-TYPE addMcastACL | 1.3.6.1.4.1.6296.101.23.21.3.3 | current |
| sleGponOnuMcastAccessListOltDeleted NOTIFICATION-TYPE addMcastACL | 1.3.6.1.4.1.6296.101.23.21.3.4 | current |
| sleGponOnuAuthServerChanged NOTIFICATION-TYPE addMcastACL | 1.3.6.1.4.1.6296.101.23.22.3.1 | current |
| sleGponOnuAuthServerDeleted NOTIFICATION-TYPE addMcastACL | 1.3.6.1.4.1.6296.101.23.22.3.2 | current |
| sleGponOnuExtVlanTagFrameTreatInnerAdded NOTIFICATION-TYPE addMcastACL | 1.3.6.1.4.1.6296.101.23.23.3.1 | current |
| sleGponOnuExtVlanTagFrameTreatInnerDeleted NOTIFICATION-TYPE addMcastACL | 1.3.6.1.4.1.6296.101.23.23.3.2 | current |
| sleGponCfmMdChanged NOTIFICATION-TYPE | 1.3.6.1.4.1.6296.101.23.24.1.3.1 | current |
| sleGponCfmMdDeleted NOTIFICATION-TYPE | 1.3.6.1.4.1.6296.101.23.24.1.3.2 | current |
| sleGponCfmMaChanged NOTIFICATION-TYPE | 1.3.6.1.4.1.6296.101.23.24.2.3.1 | current |
| sleGponCfmMaDeleted NOTIFICATION-TYPE | 1.3.6.1.4.1.6296.101.23.24.2.3.2 | current |
| sleGponCfmMepChanged NOTIFICATION-TYPE | 1.3.6.1.4.1.6296.101.23.24.3.3.1 | current |
| sleGponCfmMepDeleted NOTIFICATION-TYPE | 1.3.6.1.4.1.6296.101.23.24.3.3.2 | current |
| sleGponCfmMepCleared NOTIFICATION-TYPE | 1.3.6.1.4.1.6296.101.23.24.3.3.3 | current |
| sleGponCfmMepCcmChanged NOTIFICATION-TYPE | 1.3.6.1.4.1.6296.101.23.24.3.3.4 | current |
| sleGponCfmMipChanged NOTIFICATION-TYPE | 1.3.6.1.4.1.6296.101.23.24.4.3.1 | current |
| sleGponCfmMipDeleted NOTIFICATION-TYPE | 1.3.6.1.4.1.6296.101.23.24.4.3.2 | current |
| sleGponCfmTestLbChanged NOTIFICATION-TYPE | 1.3.6.1.4.1.6296.101.23.24.5.4.1 | current |
| sleGponCfmTestTrChanged NOTIFICATION-TYPE | 1.3.6.1.4.1.6296.101.23.24.5.4.2 | current |
| sleGponCfmRmepUpdated NOTIFICATION-TYPE | 1.3.6.1.4.1.6296.101.23.24.6.3.1 | current |
| sleGponOnuGspInfoUpdated NOTIFICATION-TYPE updateOnuGspInfo | 1.3.6.1.4.1.6296.101.23.25.3.1 | current |
| sleGponProfile2DbaAdded NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.1.3.1 | current |
| sleGponProfile2DbaDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.1.3.2 | current |
| sleGponProfile2DbaSlaChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.1.3.3 | current |
| sleGponProfile2TrafficAdded NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.2.3.1 | current |
| sleGponProfile2TrafficDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.2.3.2 | current |
| sleGponProfile2MapperAdded NOTIFICATION-TYPE addMapper | 1.3.6.1.4.1.6296.101.23.51.3.3.1 | current |
| sleGponProfile2MapperDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.3.3.2 | current |
| sleGponProfile2MapperGemportCountChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.3.3.3 | current |
| sleGponProfile2MapperDefaultCoSChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.3.3.4 | current |
| sleGponProfile2MapperDscp2BitChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.3.3.5 | current |
| sleGponProfile2MapperCosGemportChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.3.3.6 | current |
| sleGponProfile2MapperActiveEthCreated NOTIFICATION-TYPE addActiveEthMapper | 1.3.6.1.4.1.6296.101.23.51.3.3.7 | current |
| sleGponProfile2MapperActiveEthDeleted NOTIFICATION-TYPE delActiveEthMapper | 1.3.6.1.4.1.6296.101.23.51.3.3.8 | current |
| sleGponProfile2BridgeAdded NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.4.3.1 | current |
| sleGponProfile2BridgeDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.4.3.2 | current |
| sleGponProfile2BridgeMacLearningChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.4.3.3 | current |
| sleGponProfile2BridgeMaxHostChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.4.3.4 | current |
| sleGponProfile2BridgeMcastChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.4.3.5 | current |
| sleGponProfile2BridgePortBridgeChanged NOTIFICATION-TYPE setPortBridge | 1.3.6.1.4.1.6296.101.23.51.4.3.6 | current |
| sleGponProfile2BridgeAniAdded NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.5.3.1 | current |
| sleGponProfile2BridgeAniDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.5.3.2 | current |
| sleGponProfile2BridgeAniVlanFilterChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.5.3.3 | current |
| sleGponProfile2BridgeAniMacFilterPreassignChanged NOTIFICATION-TYPE setAniMacFilterPreassign | 1.3.6.1.4.1.6296.101.23.51.5.3.4 | current |
| sleGponProfile2BridgeUniAdded NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.6.3.1 | current |
| sleGponProfile2BridgeUniDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.6.3.2 | current |
| sleGponProfile2BridgeUniVlanDsOpChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.6.3.3 | current |
| sleGponProfile2BridgeUniVlanUsOpChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.6.3.4 | current |
| sleGponProfile2BridgeUniPortAdminChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.6.3.5 | current |
| sleGponProfile2BridgeUniRateLimitChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.6.3.6 | current |
| sleGponProfile2BridgeUniIgmpMaxGroupChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.6.3.7 | current |
| sleGponProfile2BridgeUniMaxFrameChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.6.3.8 | current |
| sleGponProfile2BridgeUniMcastProfileChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.6.3.9 | current |
| sleGponProfile2BridgeUniVlanFilterChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.6.3.10 | current |
| sleGponProfile2BridgeUniIpInfoChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.6.3.11 | current |
| sleGponProfile2BridgeUniVoipProfileChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.6.3.12 | current |
| sleGponProfile2BridgeUniMaxHostChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.6.3.13 | current |
| sleGponProfile2BridgeUniExtendedVlanChanged NOTIFICATION-TYPE setExtendedVlan | 1.3.6.1.4.1.6296.101.23.51.6.3.14 | current |
| sleGponProfile2BridgeUniMcastRateLimitChanged NOTIFICATION-TYPE setExtendedVlan | 1.3.6.1.4.1.6296.101.23.51.6.3.15 | current |
| sleGponProfile2BridgeUniMacFilterPreassignChanged NOTIFICATION-TYPE setUniMacFilterPreassign | 1.3.6.1.4.1.6296.101.23.51.6.3.16 | current |
| sleGponProfile2BridgeUniRateLimitProfileChanged NOTIFICATION-TYPE setUniRateLimitProfile | 1.3.6.1.4.1.6296.101.23.51.6.3.17 | current |
| sleGponProfile2BridgeUniInterDomainNameChanged NOTIFICATION-TYPE setUniInterDomainName | 1.3.6.1.4.1.6296.101.23.51.6.3.18 | current |
| sleGponProfile2TcontAdded NOTIFICATION-TYPE addTcont | 1.3.6.1.4.1.6296.101.23.51.7.3.1 | current |
| sleGponProfile2TcontDeleted NOTIFICATION-TYPE delTacont | 1.3.6.1.4.1.6296.101.23.51.7.3.2 | current |
| sleGponProfile2TcontDbaChanged NOTIFICATION-TYPE setDbaProfile | 1.3.6.1.4.1.6296.101.23.51.7.3.3 | current |
| sleGponProfile2TcontQueueWeight NOTIFICATION-TYPE setQueueWeight | 1.3.6.1.4.1.6296.101.23.51.7.3.4 | current |
| sleGponProfile2TcontGemportAdded NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.8.3.1 | current |
| sleGponProfile2TcontGemportDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.8.3.2 | current |
| sleGponProfile2McastProfileAdded NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.9.3.1 | current |
| sleGponProfile2McastProfileDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.9.3.2 | current |
| sleGponProfile2McastIgmpFuncChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.9.3.3 | current |
| sleGponProfile2McastIgmpImmLeaveChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.9.3.4 | current |
| sleGponProfile2McastIgmpRobustChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.9.3.5 | current |
| sleGponProfile2McastIgmpQuerierInfoChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.9.3.6 | current |
| sleGponProfile2McastIgmpVersionChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.9.3.7 | current |
| sleGponProfile2McastIgmpUpRateLimitChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.9.3.8 | current |
| sleGponProfile2McastIgmpTagCtrlChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.9.3.9 | current |
| sleGponProfile2McastIgmpDsTagCtrlChanged NOTIFICATION-TYPE setIgmpDsTagCtrl | 1.3.6.1.4.1.6296.101.23.51.9.3.10 | current |
| sleGponProfile2McastAclAdded NOTIFICATION-TYPE addMcastAcl | 1.3.6.1.4.1.6296.101.23.51.10.3.1 | current |
| sleGponProfile2McastAclDeleted NOTIFICATION-TYPE delMcastAcl | 1.3.6.1.4.1.6296.101.23.51.10.3.2 | current |
| sleGponProfile2McastSAclAdded NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.11.3.1 | current |
| sleGponProfile2McastSAclDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.11.3.2 | current |
| sleGponProfile2OnuAdded NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.12.3.1 | current |
| sleGponProfile2OnuDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.12.3.2 | current |
| sleGponProfile2OnuRogueInfoChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.12.3.3 | current |
| sleGponProfile2OnuRxPowerChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.12.3.4 | current |
| sleGponProfile2OnuTrafficProfileChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.12.3.5 | current |
| sleGponProfile2OnuPmProfileChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.12.3.6 | current |
| sleGponProfile2OnuCircuitPackChanged NOTIFICATION-TYPE Card Configuration value in Circuit Pack ME. CDs1E1 -> Configurable DS1/E1 CDs1E1J1 -> Configurable DS1/E1/J1 | 1.3.6.1.4.1.6296.101.23.51.12.3.7 | current |
| sleGponProfile2OnuSWWatchdogChanged NOTIFICATION-TYPE setSWWatchdog | 1.3.6.1.4.1.6296.101.23.51.12.3.8 | current |
| sleGponProfile2OnuLinkPassThroughChanged NOTIFICATION-TYPE setLinkPassThrough | 1.3.6.1.4.1.6296.101.23.51.12.3.9 | current |
| sleGponProfile2OnuCpuLoadThrChanged NOTIFICATION-TYPE setCpuLoadThr | 1.3.6.1.4.1.6296.101.23.51.12.3.10 | current |
| sleGponProfile2OnuMemoryUsageThrChanged NOTIFICATION-TYPE setMemoryUsageThr | 1.3.6.1.4.1.6296.101.23.51.12.3.11 | current |
| sleGponProfile2OnuTemperatureHighThrChanged NOTIFICATION-TYPE setTemperatureHighThr | 1.3.6.1.4.1.6296.101.23.51.12.3.12 | current |
| sleGponProfile2OnuTemperatureThrChanged NOTIFICATION-TYPE setTemperatureLowThr | 1.3.6.1.4.1.6296.101.23.51.12.3.13 | current |
| sleGponProfile2OnuLoopDetectChanged NOTIFICATION-TYPE setLoopDetect | 1.3.6.1.4.1.6296.101.23.51.12.3.14 | current |
| sleGponProfile2OnuTr069UrlChanged NOTIFICATION-TYPE setTr069Url | 1.3.6.1.4.1.6296.101.23.51.12.3.15 | current |
| sleGponProfile2OnuTr069UrlCleared NOTIFICATION-TYPE clearTr069Url | 1.3.6.1.4.1.6296.101.23.51.12.3.16 | current |
| sleGponProfile2OnuTr069StatusChanged NOTIFICATION-TYPE setTr069Status | 1.3.6.1.4.1.6296.101.23.51.12.3.17 | current |
| sleGponProfile2OnuTr069AccessChanged NOTIFICATION-TYPE setTr069Access | 1.3.6.1.4.1.6296.101.23.51.12.3.18 | current |
| sleGponProfile2OnuTr069AccessCleared NOTIFICATION-TYPE clearTr069Access | 1.3.6.1.4.1.6296.101.23.51.12.3.19 | current |
| sleGponProfile2OnuTr069TagChanged NOTIFICATION-TYPE setTr069Tag | 1.3.6.1.4.1.6296.101.23.51.12.3.20 | current |
| sleGponProfile2OnuTr069TagCleared NOTIFICATION-TYPE clearTr069Tag | 1.3.6.1.4.1.6296.101.23.51.12.3.21 | current |
| sleGponProfile2OnuSwitchControlChanged NOTIFICATION-TYPE setSwitchControl | 1.3.6.1.4.1.6296.101.23.51.12.3.22 | current |
| sleGponProfile2OnuAniVoltageHighThrChanged NOTIFICATION-TYPE setAniVoltageHighThr | 1.3.6.1.4.1.6296.101.23.51.12.3.23 | current |
| sleGponProfile2OnuAniVoltageLowThrChanged NOTIFICATION-TYPE setAniVoltageLowThr | 1.3.6.1.4.1.6296.101.23.51.12.3.24 | current |
| sleGponProfile2OnuAniTemperatureHighThrChanged NOTIFICATION-TYPE setAniTemperatureHighThr | 1.3.6.1.4.1.6296.101.23.51.12.3.25 | current |
| sleGponProfile2OnuAniTemperatureLowThrChanged NOTIFICATION-TYPE setAniTemperatureLowThr | 1.3.6.1.4.1.6296.101.23.51.12.3.26 | current |
| sleGponProfile2OnuAniTxBiasHighThrChanged NOTIFICATION-TYPE setAniTxBiasHighThr | 1.3.6.1.4.1.6296.101.23.51.12.3.27 | current |
| sleGponProfile2OnuAniTxBiasLowThrChanged NOTIFICATION-TYPE setAniTxBiasLowThr | 1.3.6.1.4.1.6296.101.23.51.12.3.28 | current |
| sleGponProfile2OnuAniTxpowerHighThrChanged NOTIFICATION-TYPE setAniTxpowerHighThr | 1.3.6.1.4.1.6296.101.23.51.12.3.29 | current |
| sleGponProfile2OnuAniTxpowerLowThrChanged NOTIFICATION-TYPE setAniTxpowerLowThr | 1.3.6.1.4.1.6296.101.23.51.12.3.30 | current |
| sleGponProfile2OnuIgmpMaxGroupsChanged NOTIFICATION-TYPE setIgmpMaxGroups | 1.3.6.1.4.1.6296.101.23.51.12.3.31 | current |
| sleGponProfile2OnuIgmpUpRateLimitChanged NOTIFICATION-TYPE setIgmpUpRateLimit | 1.3.6.1.4.1.6296.101.23.51.12.3.32 | current |
| sleGponProfile2OnuIgmpHostTrackingChanged NOTIFICATION-TYPE setIgmpHostTracking | 1.3.6.1.4.1.6296.101.23.51.12.3.33 | current |
| sleGponProfile2OnuMacFullPolicyChanged NOTIFICATION-TYPE setMacFullPolicy | 1.3.6.1.4.1.6296.101.23.51.12.3.34 | current |
| sleGponProfile2OnuCpuPacketLimitBroadcastChanged NOTIFICATION-TYPE setCpuPacketLimitBroadcast | 1.3.6.1.4.1.6296.101.23.51.12.3.35 | current |
| sleGponProfile2OnuCpuPacketLimitMulticastChanged NOTIFICATION-TYPE setOnuCpuPacketLimitMulticast | 1.3.6.1.4.1.6296.101.23.51.12.3.36 | current |
| sleGponProfile2OnuCpuPacketLimitDlfChanged NOTIFICATION-TYPE setOnuCpuPacketLimitDlf | 1.3.6.1.4.1.6296.101.23.51.12.3.37 | current |
| sleGponProfile2OnuRateLimitDownstreamChanged NOTIFICATION-TYPE setRateLimitDownstream | 1.3.6.1.4.1.6296.101.23.51.12.3.38 | current |
| sleGponProfile2OnuTrapToCpuDlfChanged NOTIFICATION-TYPE setTrapToCpuDlf | 1.3.6.1.4.1.6296.101.23.51.12.3.39 | current |
| sleGponProfile2OnuIpPathStatusChanged NOTIFICATION-TYPE | 1.3.6.1.4.1.6296.101.23.51.12.3.40 | current |
| sleGponProfile2OnuIpPathProtocolChanged NOTIFICATION-TYPE | 1.3.6.1.4.1.6296.101.23.51.12.3.41 | current |
| sleGponProfile2OnuIpPathInfoChanged NOTIFICATION-TYPE | 1.3.6.1.4.1.6296.101.23.51.12.3.42 | current |
| sleGponProfile2OnuIpPathCleared NOTIFICATION-TYPE | 1.3.6.1.4.1.6296.101.23.51.12.3.43 | current |
| sleGponProfile2OnuGspChanged NOTIFICATION-TYPE setGsp | 1.3.6.1.4.1.6296.101.23.51.12.3.44 | current |
| sleGponProfile2OnuSnmpRoCommunityChanged NOTIFICATION-TYPE setSnmpRoCommunity | 1.3.6.1.4.1.6296.101.23.51.12.3.45 | current |
| sleGponProfile2OnuSnmpRwCommunityChanged NOTIFICATION-TYPE setSnmpRwCommunity | 1.3.6.1.4.1.6296.101.23.51.12.3.46 | current |
| sleGponProfile2OnuSnmpSecurityNameChanged NOTIFICATION-TYPE setSnmpSecurityName | 1.3.6.1.4.1.6296.101.23.51.12.3.47 | current |
| sleGponProfile2OnuSnmpAgentAddressChanged NOTIFICATION-TYPE setSnmpAgentAddress | 1.3.6.1.4.1.6296.101.23.51.12.3.48 | current |
| sleGponProfile2OnuSnmpTrapHostChanged NOTIFICATION-TYPE setSnmpTrapHost | 1.3.6.1.4.1.6296.101.23.51.12.3.49 | current |
| sleGponProfile2OnuSnmpSysNameChanged NOTIFICATION-TYPE setSnmpSysName | 1.3.6.1.4.1.6296.101.23.51.12.3.50 | current |
| sleGponProfile2OnuUniRateLimitChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.13.3.1 | current |
| sleGponProfile2OnuUniVlanDsOperChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.13.3.2 | current |
| sleGponProfile2OnuUniVlanUsOperChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.13.3.3 | current |
| sleGponProfile2OnuUniIgmpMaxGroupChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.13.3.4 | current |
| sleGponProfile2OnuUniPortAdminChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.13.3.5 | current |
| sleGponProfile2PMProfileAdded NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.14.3.1 | current |
| sleGponProfile2PMProfileDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.14.3.2 | current |
| sleGponProfile2PMProfileChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.14.3.3 | current |
| sleGponProfile2OnuBridgeMaxHostChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.15.3.1 | current |
| sleGponProfile2OnuTcontDbaProfileChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.16.3.1 | current |
| sleGponProfile2IpHostSvcIpHostSvcCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.17.1.3.1 | current |
| sleGponProfile2IpHostSvcIpHostSvcDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.17.1.3.2 | current |
| sleGponProfile2IpHostSvcAddressTypeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.17.1.3.3 | current |
| sleGponProfile2IpHostSvcDnsChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.17.1.3.4 | current |
| sleGponProfile2IpHostSvcVlanFilterChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.17.1.3.5 | current |
| sleGponProfile2IpHostSvcVlanDsOperChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.17.1.3.6 | current |
| sleGponProfile2IpHostSvcVlanUsOperChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.17.1.3.7 | current |
| sleGponProfile2IpHostSvcExtendedVlanChanged NOTIFICATION-TYPE setExtendedVlan | 1.3.6.1.4.1.6296.101.23.51.17.1.3.8 | current |
| sleGponProfile2Ipv6HostSvcSuppressRsChanged NOTIFICATION-TYPE setIpv6SuppressRs | 1.3.6.1.4.1.6296.101.23.51.17.1.3.9 | current |
| sleGponProfile2Ipv6HostSvcDhcpClientChanged NOTIFICATION-TYPE setIpv6DhcpClient | 1.3.6.1.4.1.6296.101.23.51.17.1.3.10 | current |
| sleGponProfile2Ipv6HostSvcDnsChanged NOTIFICATION-TYPE setIpv6Dns | 1.3.6.1.4.1.6296.101.23.51.17.1.3.11 | current |
| sleGponProfile2IpHostVoipVoipSvcCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.17.2.3.1 | current |
| sleGponProfile2IpHostVoipVoipSvcDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.17.2.3.2 | current |
| sleGponProfile2IpHostTdmSvcCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.17.3.3.1 | current |
| sleGponProfile2IpHostTdmSvcDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.17.3.3.2 | current |
| sleGponProfile2VoipSvcVoipSvcCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.18.1.3.1 | current |
| sleGponProfile2VoipSvcVoipSvcDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.18.1.3.2 | current |
| sleGponProfile2VoipSvcUdpPortChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.18.1.3.3 | current |
| sleGponProfile2VoipSvcManageMethodChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.18.1.3.4 | current |
| sleGponProfile2VoipSvcProtocolChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.18.1.3.5 | current |
| sleGponProfile2VoipSvcIppathUrlChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.18.1.3.6 | current |
| sleGponProfile2VoipSvcIppathAuthChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.18.1.3.7 | current |
| sleGponProfile2VoipSvcVoipProfileChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.18.1.3.8 | current |
| sleGponProfile2VoipSvcUniVoipSvcUniCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.18.2.3.1 | current |
| sleGponProfile2VoipSvcUniVoipSvcUniDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.18.2.3.2 | current |
| sleGponProfile2VoipSvcUniImpedanceChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.18.2.3.3 | current |
| sleGponProfile2VoipSvcUniTransmissionPathChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.18.2.3.4 | current |
| sleGponProfile2VoipSvcUniGainChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.18.2.3.5 | current |
| sleGponProfile2VoipSvcUniHoldOverTimeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.18.2.3.6 | current |
| sleGponProfile2TdmPortCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.19.3.1 | current |
| sleGponProfile2TdmPortDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.19.3.2 | current |
| sleGponProfile2TdmExpectedTypeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.19.3.3 | current |
| sleGponProfile2TdmFramingChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.19.3.4 | current |
| sleGponProfile2TdmEncodingChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.19.3.5 | current |
| sleGponProfile2TdmLineLengthPowerFeedChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.19.3.6 | current |
| sleGponProfile2TdmDs1ModeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.19.3.7 | current |
| sleGponProfile2TdmLineTypeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.19.3.8 | current |
| sleGponProfile2TdmSvcTdmServiceCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.20.3.1 | current |
| sleGponProfile2TdmSvcTdmServiceDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.20.3.2 | current |
| sleGponProfile2TdmSvcTdmPwProfileChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.20.3.3 | current |
| sleGponProfile2TdmSvcTdmVlanFilterChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.20.3.4 | current |
| sleGponProfile2TdmSvcTdmEthDestMacChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.20.3.5 | current |
| sleGponProfile2TdmSvcTdmEthTagPolicyChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.20.3.6 | current |
| sleGponProfile2TdmSvcTdmTranEcidChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.20.3.7 | current |
| sleGponProfile2TdmSvcTdmRecvEcidChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.20.3.8 | current |
| sleGponProfile2TdmSvcTdmExpectEcidChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.20.3.9 | current |
| sleGponProfile2TdmSvcTdmUdpPortChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.20.3.10 | current |
| sleGponProfile2TdmSvcTdmFarEndIpChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.20.3.11 | current |
| sleGponProfile2TdmSvcMplsLabelIndicatorChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.20.3.12 | current |
| sleGponProfile2TdmSvcMplsPwDirectionChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.20.3.13 | current |
| sleGponProfile2TdmSvcMplsPwLabelChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.20.3.14 | current |
| sleGponProfile2TdmSvcMplsPwTunnelDirectionChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.20.3.15 | current |
| sleGponProfile2TdmSvcMplsPwTunnelLabelChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.20.3.16 | current |
| sleGponProfile2TdmSvcCesBuffCdvToleranceChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.20.3.17 | current |
| sleGponProfile2TdmSvcCesChannelAssociateSignalChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.20.3.18 | current |
| sleGponProfile2BridgeGemBridgeGemCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.21.3.1 | current |
| sleGponProfile2BridgeGemBridgeGemDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.21.3.2 | current |
| sleGponProfile2BridgeGemVlanFilterChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.21.3.3 | current |
| sleGponProfile2BridgeTdmBridgeTdmCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.22.3.1 | current |
| sleGponProfile2BridgeTdmBridgeTdmDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.22.3.2 | current |
| sleGponProfile2BridgeIpHostBridgeIpHostCreated NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.23.3.1 | current |
| sleGponProfile2BridgeIpHostBridgeIpHostDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.23.3.2 | current |
| sleGponProfile2ExtVlanProfileAdded NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.1.3.1 | current |
| sleGponProfile2ExtVlanProfileDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.1.3.2 | current |
| sleGponProfile2ExtVlanDownStreamModeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.1.3.3 | current |
| sleGponProfile2ExtVlanDscpToCosMapTableChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.1.3.4 | current |
| sleGponProfile2ExtVlanTpidChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.1.3.5 | current |
| sleGponProfile2ExtVlanTagAdded NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.3.1 | current |
| sleGponProfile2ExtVlanTagDeleted NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.3.2 | current |
| sleGponProfile2ExtVlanTagTreatmentTag NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.3.3 | current |
| sleGponProfile2ExtVlanTagTreatmentInnerChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.3.4 | current |
| sleGponProfile2ExtVlanTagTreatmentOuterChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.3.5 | current |
| sleGponProfile2ExtVlanTagFilterEtherTypeChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.3.6 | current |
| sleGponProfile2ExtVlanTagFilterInnerChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.3.7 | current |
| sleGponProfile2ExtVlanTagFilterOuterChanged NOTIFICATION-TYPE Description. | 1.3.6.1.4.1.6296.101.23.51.24.2.3.8 | current |
| sleGponProfile2MapperGemRateLimitChanged NOTIFICATION-TYPE setGemRateLimit | 1.3.6.1.4.1.6296.101.23.51.25.3.1 | current |
| sleGponProfile2MapperGemRateLimitDeleted NOTIFICATION-TYPE delGemRateLimit | 1.3.6.1.4.1.6296.101.23.51.25.3.2 | current |
| sleGponProfile2MapperGemRateLimitProfileChanged NOTIFICATION-TYPE setGemRatelimitProfile | 1.3.6.1.4.1.6296.101.23.51.25.3.3 | current |
| sleGponProfile2GemNctpServiceAdded NOTIFICATION-TYPE addNCTPService | 1.3.6.1.4.1.6296.101.23.51.26.3.1 | current |
| sleGponProfile2GemNctpServiceDeleted NOTIFICATION-TYPE delNCTPService | 1.3.6.1.4.1.6296.101.23.51.26.3.2 | current |
| sleGponProfile2GemNctpServiceChanged NOTIFICATION-TYPE setNCTPService | 1.3.6.1.4.1.6296.101.23.51.26.3.3 | current |
| sleGponProfile2VideoReturnPathSvcAdded NOTIFICATION-TYPE addVrp | 1.3.6.1.4.1.6296.101.23.51.27.3.1 | current |
| sleGponProfile2VideoReturnPathSvcDeleted NOTIFICATION-TYPE delVrp | 1.3.6.1.4.1.6296.101.23.51.27.3.2 | current |
| sleGponProfile2VideoReturnPathSvcModeChanged NOTIFICATION-TYPE setVrpMode | 1.3.6.1.4.1.6296.101.23.51.27.3.3 | current |
| sleGponProfile2VideoReturnPathSvcFrequencyChanged NOTIFICATION-TYPE setVrpFrequency | 1.3.6.1.4.1.6296.101.23.51.27.3.4 | current |
| sleGponProfile2VideoReturnPathSvcPhysicalChanged NOTIFICATION-TYPE setVrpPhysical | 1.3.6.1.4.1.6296.101.23.51.27.3.5 | current |
| sleGponProfile2PortMgmtSetted NOTIFICATION-TYPE setPortMgmtMode | 1.3.6.1.4.1.6296.101.23.51.28.3.1 | current |
| sleGponProfile2PortMgmtUnsetted NOTIFICATION-TYPE unsetPortMgmtMode | 1.3.6.1.4.1.6296.101.23.51.28.3.2 | current |
| sleGponProfile2McastAccessListAdded NOTIFICATION-TYPE addMcastACL | 1.3.6.1.4.1.6296.101.23.51.29.3.1 | current |
| sleGponProfile2McastAccessListDeleted NOTIFICATION-TYPE delMcastACL | 1.3.6.1.4.1.6296.101.23.51.29.3.2 | current |
| sleGponProfile2McastAccessListDynamicAdded NOTIFICATION-TYPE addMcastAclDynamic | 1.3.6.1.4.1.6296.101.23.51.30.3.1 | current |
| sleGponProfile2McastAccessListDynamicDeleted NOTIFICATION-TYPE delMcastAclDynamic | 1.3.6.1.4.1.6296.101.23.51.30.3.2 | current |
| sleGponProfile2McastAccessListStaticControlAdded NOTIFICATION-TYPE addMcastAclStatic | 1.3.6.1.4.1.6296.101.23.51.31.3.1 | current |
| sleGponProfile2McastAccessListStaticControlDeleted NOTIFICATION-TYPE delMcastAclStatic | 1.3.6.1.4.1.6296.101.23.51.31.3.2 | current |
| sleGponProfile2RateLimitProfileCreated NOTIFICATION-TYPE addRateLimitProfile | 1.3.6.1.4.1.6296.101.23.51.32.3.1 | current |
| sleGponProfile2RateLimitProfileDeleted NOTIFICATION-TYPE delRateLimitProfile | 1.3.6.1.4.1.6296.101.23.51.32.3.2 | current |
| sleGponProfile2RateLimitProfileChanged NOTIFICATION-TYPE setRateLimitProfile | 1.3.6.1.4.1.6296.101.23.51.32.3.3 | current |
| sleGponProfile2BridgeUniPQThresholdChanged NOTIFICATION-TYPE setPQThreshold | 1.3.6.1.4.1.6296.101.23.51.33.3.1 | current |
| sleGponProfile2BridgeUniPQProbabilityChanged NOTIFICATION-TYPE setPQProbability | 1.3.6.1.4.1.6296.101.23.51.33.3.2 | current |
| sleGponProfile2BridgeUniPQAverageCoefficientChanged NOTIFICATION-TYPE setPQAverageCoefficient | 1.3.6.1.4.1.6296.101.23.51.33.3.3 | current |
| sleGponProfile2BridgeUniPQDropPrecedenceChanged NOTIFICATION-TYPE setPQDropPrecedence | 1.3.6.1.4.1.6296.101.23.51.33.3.4 | current |
| sleGponProfile2TcontPQThresholdChanged NOTIFICATION-TYPE setPQThreshold | 1.3.6.1.4.1.6296.101.23.51.34.3.1 | current |
| sleGponProfile2TcontPQProbabilityChanged NOTIFICATION-TYPE setPQProbability | 1.3.6.1.4.1.6296.101.23.51.34.3.2 | current |
| sleGponProfile2TcontPQAverageCoefficientChanged NOTIFICATION-TYPE setPQAverageCoefficient | 1.3.6.1.4.1.6296.101.23.51.34.3.3 | current |
| sleGponProfile2TcontPQDropPrecedenceChanged NOTIFICATION-TYPE setPQDropPrecedence | 1.3.6.1.4.1.6296.101.23.51.34.3.4 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| sleGponGroup OBJECT-GROUP Description. | 1.3.6.1.4.1.6296.101.23.53 | current |
| sleGponNotificationGroup NOTIFICATION-GROUP Description. | 1.3.6.1.4.1.6296.101.23.54 | current |