MIBs Depot

SLE-DEVICE-MIB

Registered at
1.3.6.1.4.1.6296.101.2
Last updated
2004-12-10 08:52
Organization
Organization.
Namespace
dasan
Source file
SLE-DEVICE-MIB
Digest
sha256:4e4597533ac7101f8d0304cdfa8d915a9e47df11cd3a8d4bb4d655ac467988fe

Description

Description.

Contact

Contact-info.

Imports

FromSymbols
DASAN-SMIsleMgmt
SLE-TC-MIBSleControlRequestResultType, SleControlStatusType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIBITS, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DASAN-SMI
SLE-DEVICE-MIB
SLE-TC-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
sleDeviceBase
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.1
sleDeviceBaseInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.1.1
sleDeviceEthernetPortNum
OBJECT-TYPE
The number of ethernet port.
1.3.6.1.4.1.6296.101.2.1.1.1Integer32read-onlycurrent
sleDevicePowerNum
OBJECT-TYPE
The number of power module
1.3.6.1.4.1.6296.101.2.1.1.2Integer32read-onlycurrent
sleDeviceFanModuleNum
OBJECT-TYPE
The number of FAN module
1.3.6.1.4.1.6296.101.2.1.1.3Integer32read-onlycurrent
sleDeviceTemperatureNum
OBJECT-TYPE
The number of temperature sensor
1.3.6.1.4.1.6296.101.2.1.1.4Integer32read-onlycurrent
sleDeviceFanStartTemperature
OBJECT-TYPE
The temperature value which begins to turn fan.
1.3.6.1.4.1.6296.101.2.1.1.5Integer32read-onlycurrent
sleDeviceFanStopTemperature
OBJECT-TYPE
The temperature value which stops fan.
1.3.6.1.4.1.6296.101.2.1.1.6Integer32read-onlycurrent
sleDeviceJumboFrameStatus
OBJECT-TYPE
The global jumbo-frame status. 2011/01/20 V5924CR only support this.
1.3.6.1.4.1.6296.101.2.1.1.7INTEGER {enable(1), disable(2)}read-onlycurrent
sleDeviceEnvironmentMonitoringStatus
OBJECT-TYPE
The alarm input mode of environment monitoring for AIU
1.3.6.1.4.1.6296.101.2.1.1.8INTEGER {notInstallAIU(0), normalOpen(1), normalClose(2)}read-onlycurrent
sleDeviceBaseControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.1.2
sleDeviceControlRequest
OBJECT-TYPE
set an administrative state of FAN module
1.3.6.1.4.1.6296.101.2.1.2.1INTEGER {setDeviceTemperatureThreshold(1), setDeviceJumboFrameStatus(2), setDeviceLEDTest(3), setEnvironmentMonitoringStatus(4)}read-writecurrent
sleDeviceControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.1.2.2SleControlStatusTyperead-onlycurrent
sleDeviceControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.1.2.3Gauge32read-writecurrent
sleDeviceControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.1.2.4TimeTicksread-onlycurrent
sleDeviceControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.1.2.5SleControlRequestResultTyperead-onlycurrent
sleDeviceControlFanStartTemperature
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.1.2.6Integer32read-writecurrent
sleDeviceControlFanStopTemperature
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.1.2.7Integer32read-writecurrent
sleDeviceControlJumboFrameStatus
OBJECT-TYPE
The global jumbo-frame status. 2011/01/20 V5924CR only support this.
1.3.6.1.4.1.6296.101.2.1.2.8INTEGER {enable(1), disable(2)}read-writecurrent
sleDeviceControlEnvironmentMonitoringStatus
OBJECT-TYPE
The alarm input mode of environment monitoring for AIU
1.3.6.1.4.1.6296.101.2.1.2.9INTEGER {normalOpen(1), normalClose(2)}read-onlycurrent
sleDeviceBaseNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.1.3
sleEthernetPort
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.2
sleEthernetPortTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.1not-accessiblecurrent
sleEthernetPortEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.1.1not-accessiblecurrent
sleEthernetPortIndex
OBJECT-TYPE
The port index.
1.3.6.1.4.1.6296.101.2.2.1.1.1INTEGER (1..255)read-onlycurrent
sleEthernetPortPhyIndex
OBJECT-TYPE
The physical index of entity mib.
1.3.6.1.4.1.6296.101.2.2.1.1.2Integer32read-onlycurrent
sleEthernetPortType
OBJECT-TYPE
The type of port. It is not planed to made a automatic switchover between optical and electrical interfaces.
1.3.6.1.4.1.6296.101.2.2.1.1.3INTEGER {unknown(0), electrical(1), optical(2)}read-onlycurrent
sleEthernetPortAdminStatus
OBJECT-TYPE
The admin status of port.
1.3.6.1.4.1.6296.101.2.2.1.1.4INTEGER {up(1), down(2), notAvailable(3)}read-onlycurrent
sleEthernetPortOperStatus
OBJECT-TYPE
The oper status of port
1.3.6.1.4.1.6296.101.2.2.1.1.5INTEGER {up(1), down(2), notAvailable(3)}read-onlycurrent
sleEthernetPortTransmissionRate
OBJECT-TYPE
The speed of port. Unit is Mbit/s. This configurations are only useful for electrical interfaces. Optical - interfaces will always support 1000 MBIT/s
1.3.6.1.4.1.6296.101.2.2.1.1.6Integer32 (10 | 100 | 1000 | 2500 | 10000)read-onlycurrent
sleEthernetPortDuplexMode
OBJECT-TYPE
The duplex status of port.
1.3.6.1.4.1.6296.101.2.2.1.1.7INTEGER {full(1), half(2), notAvailable(3)}read-onlycurrent
sleEthernetPortFlowControl
OBJECT-TYPE
The flow-control mode of port.
1.3.6.1.4.1.6296.101.2.2.1.1.8INTEGER {disabled(1), enabledSymetrical(2), enabledAsymetrical(3), enabledBoth(4), notAvailable(5)}read-onlycurrent
sleEthernetPortNegotiationMode
OBJECT-TYPE
The Auto Negotiation mode of port.
1.3.6.1.4.1.6296.101.2.2.1.1.9INTEGER {auto(1), force(2), notAvailable(3)}read-onlycurrent
sleEthernetPortJumboFrameSize
OBJECT-TYPE
The jumbo frame's size of port. If the value is zero, it means that it is not set up.
1.3.6.1.4.1.6296.101.2.2.1.1.10Integer32 (0 | 1518..12288)read-onlycurrent
sleEthernetPortSfpTransceiver
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.1.1.11INTEGER {unknown(0), electrical(1), electricalCoaxial(2), opticalLongHaul(3), opticalShortHaul(4), optical10G(5), opticalGpon(6)}read-onlycurrent
sleEthernetPortSfpVendorName
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.1.1.12OCTET STRINGread-onlycurrent
sleEthernetPortSfpVendorPartNumber
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.1.1.13OCTET STRINGread-onlycurrent
sleEthernetPortSfpVendorRevision
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.1.1.14OCTET STRINGread-onlycurrent
sleEthernetPortSfpVendorSerialNumber
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.1.1.15OCTET STRINGread-onlycurrent
sleEthernetPortSfpDateCode
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.1.1.16OCTET STRINGread-onlycurrent
sleEthernetPortPhysicalRemoteChassis
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.1.1.17OCTET STRINGread-onlycurrent
sleEthernetPortPhysicalRemoteSlot
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.1.1.18Integer32read-onlycurrent
sleEthernetPortPhysicalRemotePort
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.1.1.19Integer32read-onlycurrent
sleEthernetPortPhysicalLinkDiscoveryMode
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.1.1.20INTEGER {none(1), manual(2), automatic(3)}read-onlycurrent
sleEthernetPortSfpTransceiverType
OBJECT-TYPE
The type of SFP transceiver.
1.3.6.1.4.1.6296.101.2.2.1.1.21INTEGER {sfp(1), gbit(2), xfp(3), unknown(255)}read-onlycurrent
sleEthernetPortSfpTransceiverDetailType
OBJECT-TYPE
The detailed-type of SFP transceiver.
1.3.6.1.4.1.6296.101.2.2.1.1.22INTEGER {fiber1000Sx(1), fiber1000Lx(2), fiber1000Cx(3), fiber1000T(4), fiber100lLxLx10(5), fiber100Fx(6), fiberBx10(7), fiberPx(8), fiberOc3MmSr(9), fiberOc3SmIr(10), fiberOc3SmLr(11), fiber1000Zx(12), unknown(255)}read-writecurrent
sleEthernetPortSlotIndex
OBJECT-TYPE
The slot index.
1.3.6.1.4.1.6296.101.2.2.1.1.23Integer32read-onlycurrent
sleEthernetPortSlotPortIndex
OBJECT-TYPE
The slot's port index.
1.3.6.1.4.1.6296.101.2.2.1.1.24Integer32read-onlycurrent
sleEthernetPortAdminTransmissionRate
OBJECT-TYPE
The speed of port. Unit is Mbit/s. This configurations are only useful for electrical interfaces. Optical - interfaces will always support 1000 MBIT/s
1.3.6.1.4.1.6296.101.2.2.1.1.25Integer32 (10 | 100 | 1000 | 10000)read-onlycurrent
sleEthernetPortAdminDuplexMode
OBJECT-TYPE
The duplex status of port.
1.3.6.1.4.1.6296.101.2.2.1.1.26INTEGER {full(1), half(2), notAvailable(255)}read-onlycurrent
sleEthernetPortAdminFlowControl
OBJECT-TYPE
The flow-control mode of port.
1.3.6.1.4.1.6296.101.2.2.1.1.27INTEGER {disabled(1), enableSend(2), enableReceive(3), enabledBoth(4)}read-onlycurrent
sleEthernetPortAdminNegotiationMode
OBJECT-TYPE
The Auto Negotiation mode of port.
1.3.6.1.4.1.6296.101.2.2.1.1.28INTEGER {auto(1), force(2), notAvailable(255)}read-onlycurrent
sleEthernetPortAdminReason
OBJECT-TYPE
The admin down reason of the interface. user : by user-configuration xllcf : by xllcf protocol all : both user and xllcf
1.3.6.1.4.1.6296.101.2.2.1.1.29INTEGER {none(0), user(1), xllcf(2), all(3)}read-onlycurrent
sleEthernetPortLinkCheckTimer
OBJECT-TYPE
The Link check internval of the interface
1.3.6.1.4.1.6296.101.2.2.1.1.30Integer32 (20..1000)read-onlycurrent
sleEthernetPortLinkDebounceTime
OBJECT-TYPE
The link debounce time of the interface
1.3.6.1.4.1.6296.101.2.2.1.1.31Integer32 (0 | 10..5000)read-onlycurrent
sleEthernetPortCpuStatisticsLimitUnicast
OBJECT-TYPE
The CPU statistics-limit Unicast Count ( the standard unit : 1000, 10 = 1000 )
1.3.6.1.4.1.6296.101.2.2.1.1.32Integer32 (0 | 10..100)read-onlycurrent
sleEthernetPortCpuStatisticsLimitMulticast
OBJECT-TYPE
et CPU statistics-limit Multicast Count ( the standard unit : 1000, 10 = 1000 )
1.3.6.1.4.1.6296.101.2.2.1.1.33Integer32 (0 | 10..100)read-onlycurrent
sleEthernetPortCpuStatisticsLimitBroadcast
OBJECT-TYPE
Set CPU statistics-limit Broadcast Count ( the standard unit : 1000, 10 = 1000 )
1.3.6.1.4.1.6296.101.2.2.1.1.34Integer32 (0 | 10..100)read-onlycurrent
sleEthernetPortFloodBlockBroadcastState
OBJECT-TYPE
The Flood Block Broadcast State of the interface
1.3.6.1.4.1.6296.101.2.2.1.1.35INTEGER {disable(0), enable(1)}read-onlycurrent
sleEthernetPortFloodBlockDlfState
OBJECT-TYPE
The Flood Block DLF State of the interface
1.3.6.1.4.1.6296.101.2.2.1.1.36INTEGER {disable(0), enable(1)}read-onlycurrent
sleEthernetPortControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.2.2
sleEthernetPortControlRequest
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.2.1INTEGER {setEthernetPortProfile(1), setEthernetPortLinkProfile(2), setEhternetPortCpuStatisticsLimitProfile(3), setEthernetPortFloodBlockStateProfile(4)}read-writecurrent
sleEthernetPortControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.2.2SleControlStatusTyperead-onlycurrent
sleEthernetPortControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.2.3Gauge32read-writecurrent
sleEthernetPortControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.2.4TimeTicksread-onlycurrent
sleEthernetPortControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.2.5SleControlRequestResultTyperead-onlycurrent
sleEthernetPortControlIndex
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.2.6Integer32read-writecurrent
sleEthernetPortControlType
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.2.7INTEGER {unknown(0), electrical(1), optical(2)}read-writecurrent
sleEthernetPortControlAdminStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.2.8INTEGER {up(1), down(2), notAvailable(3)}read-writecurrent
sleEthernetPortControlTransmissionRate
OBJECT-TYPE
Description.The speed of port. Unit is Mbit/s. This configurations are only useful for electrical interfaces. Optical - interfaces will always support 1000 MBIT/s
1.3.6.1.4.1.6296.101.2.2.2.9Integer32 (10 | 100 | 1000 | 2500 | 10000)read-writecurrent
sleEthernetPortControlDuplexMode
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.2.10INTEGER {full(1), half(2), notAvailable(3)}read-writecurrent
sleEthernetPortControlFlowControl
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.2.11INTEGER {disabled(1), enabledSymetrical(2), enabledAsymetrical(3), enabledBoth(4), notAvailable(5)}read-writecurrent
sleEthernetPortControlNegotiationMode
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.2.12INTEGER {auto(1), force(2), notAvailable(3)}read-writecurrent
sleEthernetPortControlJumboFrameSize
OBJECT-TYPE
Description. If the value is zero, it means erasing the set-up value.
1.3.6.1.4.1.6296.101.2.2.2.13Integer32 (0 | 1518..12288)read-writecurrent
sleEthernetPortControlPhysicalRemoteChassis
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.2.14OCTET STRINGread-writecurrent
sleEthernetPortControlPhysicalRemoteSlot
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.2.15Integer32read-writecurrent
sleEthernetPortControlPhysicalRemotePort
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.2.16Integer32read-writecurrent
sleEthernetPortControlPhysicalLinkDiscoveryMode
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.2.17INTEGER {none(1), manual(2), automatic(3)}read-writecurrent
sleEthernetPortControlLinkCheckTimer
OBJECT-TYPE
The Link check internval of the interface
1.3.6.1.4.1.6296.101.2.2.2.18Integer32 (20..1000)read-writecurrent
sleEthernetPortControlLinkDebounceTime
OBJECT-TYPE
The link debounce time of the interface
1.3.6.1.4.1.6296.101.2.2.2.19Integer32 (0 | 10..5000)read-writecurrent
sleEthernetPortControlCpuStatisticsLimitUnicast
OBJECT-TYPE
The CPU statistics-limit Unicast Count ( the standard unit : 1000, 10 = 1000 )
1.3.6.1.4.1.6296.101.2.2.2.20Integer32 (0 | 10..100)read-writecurrent
sleEthernetPortControlCpuStatisticsLimitMulticast
OBJECT-TYPE
et CPU statistics-limit Multicast Count ( the standard unit : 1000, 10 = 1000 )
1.3.6.1.4.1.6296.101.2.2.2.21Integer32 (0 | 10..100)read-writecurrent
sleEthernetPortControlCpuStatisticsLimitBroadcast
OBJECT-TYPE
Set CPU statistics-limit Broadcast Count ( the standard unit : 1000, 10 = 1000 )
1.3.6.1.4.1.6296.101.2.2.2.22Integer32 (0 | 10..100)read-writecurrent
sleEthernetPortControlFloodBlockBroadcastState
OBJECT-TYPE
The Flood Block Broadcast State of the interface
1.3.6.1.4.1.6296.101.2.2.2.23INTEGER {disable(0), enable(1)}read-writecurrent
sleEthernetPortControlFloodBlockDlfState
OBJECT-TYPE
The Flood Block DLF State of the interface
1.3.6.1.4.1.6296.101.2.2.2.24INTEGER {disable(0), enable(1)}read-writecurrent
sleEthernetPortNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.2.3
sleEthernetPortDMITable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.4not-accessiblecurrent
sleEthernetPortDMIEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.4.1not-accessiblecurrent
sleEthernetPortDMIIndex
OBJECT-TYPE
Port Index.
1.3.6.1.4.1.6296.101.2.2.4.1.1INTEGER (1..255)read-onlycurrent
sleEthernetPortDMITemper
OBJECT-TYPE
Internally measured module temperature.
1.3.6.1.4.1.6296.101.2.2.4.1.2OCTET STRINGread-onlycurrent
sleEthernetPortDMIVoltage
OBJECT-TYPE
Internally measured supply voltage in transceiver.
1.3.6.1.4.1.6296.101.2.2.4.1.3OCTET STRINGread-onlycurrent
sleEthernetPortDMITxBias
OBJECT-TYPE
Internally measured TX Bias Current.
1.3.6.1.4.1.6296.101.2.2.4.1.4OCTET STRINGread-onlycurrent
sleEthernetPortDMITxPower
OBJECT-TYPE
Measured TX output power.
1.3.6.1.4.1.6296.101.2.2.4.1.5OCTET STRINGread-onlycurrent
sleEthernetPortDMIRxPower
OBJECT-TYPE
Measured RX input power.
1.3.6.1.4.1.6296.101.2.2.4.1.6OCTET STRINGread-onlycurrent
sleEthernetSFPTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.5not-accessiblecurrent
sleEthernetSFPEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.5.1not-accessiblecurrent
sleEthernetSfpIndex
OBJECT-TYPE
The SFP index.
1.3.6.1.4.1.6296.101.2.2.5.1.1Integer32 (1..65556)read-onlycurrent
sleEthernetSfpTransceiver
OBJECT-TYPE
The type of SFP
1.3.6.1.4.1.6296.101.2.2.5.1.2INTEGER {unknown(0), electrical(1), electricalCoaxial(2), opticalLongHaul(3), opticalShortHaul(4), optical10G(5), opticalGpon(6)}read-onlycurrent
sleEthernetSfpVendorName
OBJECT-TYPE
The vendor name of SFP
1.3.6.1.4.1.6296.101.2.2.5.1.3OCTET STRINGread-onlycurrent
sleEthernetSfpVendorPartNumber
OBJECT-TYPE
The part number of SFP
1.3.6.1.4.1.6296.101.2.2.5.1.4OCTET STRINGread-onlycurrent
sleEthernetSfpVendorRevision
OBJECT-TYPE
The revision of SFP
1.3.6.1.4.1.6296.101.2.2.5.1.5OCTET STRINGread-onlycurrent
sleEthernetSfpVendorSerialNumber
OBJECT-TYPE
The serial number of SFP
1.3.6.1.4.1.6296.101.2.2.5.1.6OCTET STRINGread-onlycurrent
sleEthernetSfpDateCode
OBJECT-TYPE
The manufacturing date of SFP
1.3.6.1.4.1.6296.101.2.2.5.1.7OCTET STRINGread-onlycurrent
sleEthernetSfpTransceiverType
OBJECT-TYPE
The type of SFP transceiver.
1.3.6.1.4.1.6296.101.2.2.5.1.8INTEGER {sfp(1), gbic(2), xfp(3), unknown(255)}read-onlycurrent
sleEthernetSfpTransceiverDetailType
OBJECT-TYPE
The detailed-type of SFP transceiver.
1.3.6.1.4.1.6296.101.2.2.5.1.9INTEGER {fiber1000Sx(1), fiber1000Lx(2), fiber1000Cx(3), fiber1000T(4), fiber100lLxLx10(5), fiber100Fx(6), fiberBx10(7), fiberPx(8), fiberOc3MmSr(9), fiberOc3SmIr(10), fiberOc3SmLr(11), fiber1000Zx(12), base10GSR(64), base10GLR(65), base10GER(66), base10GLRM(67), base10GSW(68), base10GLW(69), base10GEW(70), base10GEWorZW(71), unknown(255)}read-writecurrent
sleEthernetSfpTransceiverCodes
OBJECT-TYPE
The transceiver codes. In case of SFP, reference SFP-8472 Rev 11.0 - Table 3.5: Transceiver codes (Address A0h) - Table 3.5a: SONET Compliance Specifiers (A0h) In case of XFP, reference XFP Specification Revision 4.5 (August 31,2005) - Table 40 Transceiver codes
1.3.6.1.4.1.6296.101.2.2.5.1.10OCTET STRING (SIZE(1..8))read-onlycurrent
sleEthernetSfpSpeed
OBJECT-TYPE
The speed of SFP
1.3.6.1.4.1.6296.101.2.2.5.1.11OCTET STRINGread-onlycurrent
sleEthernetSfpLength
OBJECT-TYPE
The length of SFP
1.3.6.1.4.1.6296.101.2.2.5.1.12Integer32read-onlycurrent
sleEthernetSfpWaveLength
OBJECT-TYPE
The wavelength of SFP
1.3.6.1.4.1.6296.101.2.2.5.1.13Integer32read-onlycurrent
sleEthernetSfpMultimodeLengthOm1
OBJECT-TYPE
The Flame rating is 62.5um(OM1). This is used only for 10G SFP module with multi-mode. ref) 50/125 Multimode Fiber Optic 50/125 is one of the most commonly used multimode optical fiber, the other commonly used is 62.5/125 types. There is a special kind 50/125 multimode fibers, which is called OM3 50/125. People usually refer 62.5/125 as the OM1 MMF, common type 50/125 MMF as OM2, OM3 is also 50/125, but it is different from OM2 because it support 10Gig data transmission. The OM3 50/125 fiber optic cable is also called laser optimized fiber cable. Both OM1 and OM2 multimode cables use the orange color jacket (standard practice for commonly used indoor multimode), OM3 use a special color, which is called Aqua.
1.3.6.1.4.1.6296.101.2.2.5.1.14Integer32read-onlycurrent
sleEthernetSfpMultimodeLengthOm2
OBJECT-TYPE
The Flame rating is 50um(OM2). This is used only for 10G SFP module with multi-mode. ref) 50/125 Multimode Fiber Optic 50/125 is one of the most commonly used multimode optical fiber, the other commonly used is 62.5/125 types. There is a special kind 50/125 multimode fibers, which is called OM3 50/125. People usually refer 62.5/125 as the OM1 MMF, common type 50/125 MMF as OM2, OM3 is also 50/125, but it is different from OM2 because it support 10Gig data transmission. The OM3 50/125 fiber optic cable is also called laser optimized fiber cable. Both OM1 and OM2 multimode cables use the orange color jacket (standard practice for commonly used indoor multimode), OM3 use a special color, which is called Aqua.
1.3.6.1.4.1.6296.101.2.2.5.1.15Integer32read-onlycurrent
sleEthernetSfpMultimodeLengthOm3
OBJECT-TYPE
The Flame rating is 50um(OM3). This is used only for 10G SFP module with multi-mode. ref) 50/125 Multimode Fiber Optic 50/125 is one of the most commonly used multimode optical fiber, the other commonly used is 62.5/125 types. There is a special kind 50/125 multimode fibers, which is called OM3 50/125. People usually refer 62.5/125 as the OM1 MMF, common type 50/125 MMF as OM2, OM3 is also 50/125, but it is different from OM2 because it support 10Gig data transmission. The OM3 50/125 fiber optic cable is also called laser optimized fiber cable. Both OM1 and OM2 multimode cables use the orange color jacket (standard practice for commonly used indoor multimode), OM3 use a special color, which is called Aqua.
1.3.6.1.4.1.6296.101.2.2.5.1.16Integer32read-onlycurrent
sleEthernetSfpTransceiverDetailTypeStr
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.5.1.17OCTET STRINGread-onlycurrent
sleEthernetSfpTransceiverLengthStr
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.5.1.18OCTET STRINGread-onlycurrent
sleEthernetSfpWaveLengthStr
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.5.1.19OCTET STRINGread-onlycurrent
sleEthernetSfpConnectorType
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.5.1.20OCTET STRINGread-onlycurrent
sleEthernetSfpDdmState
OBJECT-TYPE
The DDM state
1.3.6.1.4.1.6296.101.2.2.5.1.21INTEGER {disable(0), enable(1)}read-onlycurrent
sleEthernetSfpNegoState
OBJECT-TYPE
The Nego state
1.3.6.1.4.1.6296.101.2.2.5.1.22INTEGER {off(0), on(1)}read-onlycurrent
sleEthernetSFPControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.2.6
sleEthernetSFPControlRequest
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.6.1INTEGER {setSFPRemoteReset(1), setSFPDdmState(2)}read-writecurrent
sleEthernetSFPControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.6.2SleControlStatusTyperead-onlycurrent
sleEthernetSFPControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.6.3Gauge32read-writecurrent
sleEthernetSFPControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.6.4TimeTicksread-onlycurrent
sleEthernetSFPControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.6.5SleControlRequestResultTyperead-onlycurrent
sleEthernetSFPControlIndex
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.6.6Integer32read-writecurrent
sleEthernetSfpControlDdmState
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.6.7INTEGER {disable(0), enable(1)}read-writecurrent
sleEthernetSFPNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.2.7
sleEthernetSFPThresholdTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.8not-accessiblecurrent
sleEthernetSFPThresholdEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.8.1not-accessiblecurrent
sleEthernetSFPThresholdIfIndex
OBJECT-TYPE
The index of the interface
1.3.6.1.4.1.6296.101.2.2.8.1.1Integer32 (1..65535)read-onlycurrent
sleEthernetSFPThresholdType
OBJECT-TYPE
The Type of Threshold
1.3.6.1.4.1.6296.101.2.2.8.1.2INTEGER {temperWarning(1), temperAlarm(2), voltageWarning(3), voltageAlarm(4), txbiasWarning(5), txbiasAlarm(6), txpowerWarning(7), txpowerAlarm(8), rxpowerWarning(9), rxpowerAlarm(10)}read-onlycurrent
sleEthernetSFPThresholdSfpLow
OBJECT-TYPE
The Threshold Low Value of Sfp
1.3.6.1.4.1.6296.101.2.2.8.1.3OCTET STRINGread-onlycurrent
sleEthernetSFPThresholdSfpHigh
OBJECT-TYPE
The Threshold High Value of Sfp
1.3.6.1.4.1.6296.101.2.2.8.1.4OCTET STRINGread-onlycurrent
sleEthernetSFPThresholdSystemLow
OBJECT-TYPE
The Threshold Low Value of System
1.3.6.1.4.1.6296.101.2.2.8.1.5OCTET STRINGread-onlycurrent
sleEthernetSFPThresholdSystemHigh
OBJECT-TYPE
The Threshold High Value of System
1.3.6.1.4.1.6296.101.2.2.8.1.6OCTET STRINGread-onlycurrent
sleEthernetSFPThresholdControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.2.9
sleEthernetSFPThresholdControlRequest
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.9.1INTEGER {setSfpThresholdModule(1), setSystemThresholdModule(2), delThresholdModule(3)}read-writecurrent
sleEthernetSFPThresholdControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.9.2SleControlStatusTyperead-onlycurrent
sleEthernetSFPThresholdControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.9.3Gauge32read-writecurrent
sleEthernetSFPThresholdControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.9.4TimeTicksread-onlycurrent
sleEthernetSFPThresholdControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.9.5SleControlRequestResultTyperead-onlycurrent
sleEthernetSFPThresholdControlIfIndex
OBJECT-TYPE
The index of the interface
1.3.6.1.4.1.6296.101.2.2.9.6Integer32read-writecurrent
sleEthernetSFPThresholdControlType
OBJECT-TYPE
The Type of Threshold
1.3.6.1.4.1.6296.101.2.2.9.7INTEGER {temperWarning(1), temperAlarm(2), voltageWarning(3), voltageAlarm(4), txbiasWarning(5), txbiasAlarm(6), txpowerWarning(7), txpowerAlarm(8), rxpowerWarning(9), rxpowerAlarm(10)}read-writecurrent
sleEthernetSFPThresholdControlSfpLow
OBJECT-TYPE
The Threshold Low Value of Sfp
1.3.6.1.4.1.6296.101.2.2.9.8OCTET STRINGread-writecurrent
sleEthernetSFPThresholdControlSfpHigh
OBJECT-TYPE
The Threshold High Value of Sfp
1.3.6.1.4.1.6296.101.2.2.9.9OCTET STRINGread-writecurrent
sleEthernetSFPThresholdControlSystemLow
OBJECT-TYPE
The Threshold Low Value of System
1.3.6.1.4.1.6296.101.2.2.9.10OCTET STRINGread-writecurrent
sleEthernetSFPThresholdControlSystemHigh
OBJECT-TYPE
The Threshold High Value of System
1.3.6.1.4.1.6296.101.2.2.9.11OCTET STRINGread-writecurrent
sleEthernetSFPThresholdNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.2.10
slePower
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.3
slePowerTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.3.1not-accessiblecurrent
slePowerEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.3.1.1not-accessiblecurrent
slePowerIndex
OBJECT-TYPE
A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
1.3.6.1.4.1.6296.101.2.3.1.1.1INTEGER (1..255)read-onlycurrent
slePowerPhyIndex
OBJECT-TYPE
entPhysicalIndex of Power Modules (0: Internal, -1: uninstalled)
1.3.6.1.4.1.6296.101.2.3.1.1.2Integer32read-onlycurrent
slePowerState
OBJECT-TYPE
Power status information.
1.3.6.1.4.1.6296.101.2.3.1.1.3INTEGER {failure(0), ok(1)}read-onlycurrent
slePowerType
OBJECT-TYPE
Power type information.
1.3.6.1.4.1.6296.101.2.3.1.1.4INTEGER {ac(1), dc(2), unknown(3), psu(4)}read-onlycurrent
slePowerPSUType
OBJECT-TYPE
The type of Power Supply Unit.(DC)
1.3.6.1.4.1.6296.101.2.3.1.1.5INTEGER {psuA(1), psuS(2), unknown(255)}read-onlycurrent
sleFanModule
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.4
sleFanModuleTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.4.1not-accessiblecurrent
sleFanModuleEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.4.1.1not-accessiblecurrent
sleFanModuleIndex
OBJECT-TYPE
A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1.
1.3.6.1.4.1.6296.101.2.4.1.1.1INTEGER (1..255)read-onlycurrent
sleFanModulePhyIndex
OBJECT-TYPE
entPhysicalIndex of FAN Modules. (0: Internal, -1: uninstalled)
1.3.6.1.4.1.6296.101.2.4.1.1.2Integer32read-onlycurrent
sleFanModuleUnitNum
OBJECT-TYPE
The number of unit in FAN module
1.3.6.1.4.1.6296.101.2.4.1.1.3Integer32read-onlycurrent
sleFanModuleAdminState
OBJECT-TYPE
An administrative state of FAN module
1.3.6.1.4.1.6296.101.2.4.1.1.4INTEGER {off(0), on(1), auto(2)}read-onlycurrent
sleFanModuleSpeedThreshold
OBJECT-TYPE
Fan-speed threshold
1.3.6.1.4.1.6296.101.2.4.1.1.5Integer32read-onlycurrent
sleFanModuleControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.4.2
sleFanModuleControlRequest
OBJECT-TYPE
set an administrative state of FAN module
1.3.6.1.4.1.6296.101.2.4.2.1INTEGER {setFanAdminState(1), setFanSpeedThreshold(2)}read-writecurrent
sleFanModuleControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.4.2.2SleControlStatusTyperead-onlycurrent
sleFanModuleControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.4.2.3Gauge32read-writecurrent
sleFanModuleControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.4.2.4TimeTicksread-onlycurrent
sleFanModuleControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.4.2.5SleControlRequestResultTyperead-onlycurrent
sleFanModuleControlIndex
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.4.2.6Integer32read-writecurrent
sleFanModuleControlAdminState
OBJECT-TYPE
An administrative state of FAN module
1.3.6.1.4.1.6296.101.2.4.2.7INTEGER {off(0), on(1), auto(2)}read-writecurrent
sleFanModuleControlSpeedThreshold
OBJECT-TYPE
Fan-speed threshold
1.3.6.1.4.1.6296.101.2.4.2.8Integer32read-writecurrent
sleFanModuleNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.4.3
sleFanUnit
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.5
sleFanUnitTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.5.1not-accessiblecurrent
sleFanUnitEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.5.1.1not-accessiblecurrent
sleFanUnitIndex
OBJECT-TYPE
A unique number in FAN module
1.3.6.1.4.1.6296.101.2.5.1.1.1INTEGER (1..255)read-onlycurrent
sleFanUnitOperState
OBJECT-TYPE
An operational state of FAN unit
1.3.6.1.4.1.6296.101.2.5.1.1.2INTEGER {failure(0), ok(1), stop(2)}read-onlycurrent
sleFanUnitSpeed
OBJECT-TYPE
Speed of FAN unit
1.3.6.1.4.1.6296.101.2.5.1.1.3Integer32read-onlycurrent
sleTemperature
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.6
sleTemperatureTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.6.1not-accessiblecurrent
sleTemperatureEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.6.1.1not-accessiblecurrent
sleTemperatureIndex
OBJECT-TYPE
A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1.
1.3.6.1.4.1.6296.101.2.6.1.1.1INTEGER (1..255)read-onlycurrent
sleTemperatureState
OBJECT-TYPE
Temperature status information
1.3.6.1.4.1.6296.101.2.6.1.1.2INTEGER {failure(0), ok(1), others(2)}read-onlycurrent
sleTemperatureValue
OBJECT-TYPE
The value of temperature sensor. (unit: C)
1.3.6.1.4.1.6296.101.2.6.1.1.3Integer32read-onlycurrent
sleTemperatureHighThreshold
OBJECT-TYPE
The High threshold of temperature.
1.3.6.1.4.1.6296.101.2.6.1.1.4Integer32read-onlycurrent
sleTemperatureLowThreshold
OBJECT-TYPE
The Low threshold of temperature.
1.3.6.1.4.1.6296.101.2.6.1.1.5Integer32read-onlycurrent
sleTemperatureWarnHighThreshold
OBJECT-TYPE
The High threshold of temperature.
1.3.6.1.4.1.6296.101.2.6.1.1.6Integer32 (-40..100)read-onlycurrent
sleTemperatureWarnLowThreshold
OBJECT-TYPE
The Low threshold of temperature.
1.3.6.1.4.1.6296.101.2.6.1.1.7Integer32 (-40..100)read-onlycurrent
sleTemperatureWarnDuration
OBJECT-TYPE
Duration-time units by the 5 sec. 0: Clear threshold.
1.3.6.1.4.1.6296.101.2.6.1.1.8Integer32 (0..300)read-onlycurrent
sleTemperatureAlarmHighThreshold
OBJECT-TYPE
The High threshold of temperature.
1.3.6.1.4.1.6296.101.2.6.1.1.9Integer32 (-40..100)read-onlycurrent
sleTemperatureAlarmLowThreshold
OBJECT-TYPE
The Low threshold of temperature.
1.3.6.1.4.1.6296.101.2.6.1.1.10Integer32 (-40..100)read-onlycurrent
sleTemperatureAlarmDuration
OBJECT-TYPE
Duration-time units by the 5 sec. 0: Clear threshold.
1.3.6.1.4.1.6296.101.2.6.1.1.11Integer32 (0..300)read-onlycurrent
sleTemperatureControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.6.2
sleTemperatureControlRequest
OBJECT-TYPE
set an administrative state of FAN module
1.3.6.1.4.1.6296.101.2.6.2.1INTEGER {setTempThreshold(1), setTempAlarmThreshold(2), setTempWarnThreshold(3)}read-writecurrent
sleTemperatureControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.6.2.2SleControlStatusTyperead-onlycurrent
sleTemperatureControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.6.2.3Gauge32read-writecurrent
sleTemperatureControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.6.2.4TimeTicksread-onlycurrent
sleTemperatureControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.6.2.5SleControlRequestResultTyperead-onlycurrent
sleTemperatureControlIndex
OBJECT-TYPE
The Temperature index
1.3.6.1.4.1.6296.101.2.6.2.6Integer32read-writecurrent
sleTemperatureControlHighThreshold
OBJECT-TYPE
The High threshold of temperature.
1.3.6.1.4.1.6296.101.2.6.2.7Integer32read-writecurrent
sleTemperatureControlLowThreshold
OBJECT-TYPE
The Low threshold of temperature.
1.3.6.1.4.1.6296.101.2.6.2.8Integer32read-writecurrent
sleTemperatureControlDuration
OBJECT-TYPE
Duration-time units by the 5 sec. 0: Clear threshold.
1.3.6.1.4.1.6296.101.2.6.2.9Integer32 (0..300)read-writecurrent
sleTemperatureNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.6.3
sleBattery
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.7
sleBatteryTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.1not-accessiblecurrent
sleBatteryEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.1.1not-accessiblecurrent
sleBatteryIndex
OBJECT-TYPE
The index of battery charger.
1.3.6.1.4.1.6296.101.2.7.1.1.1INTEGER (1..256)read-onlycurrent
sleOperationPowerType
OBJECT-TYPE
Power Type.
1.3.6.1.4.1.6296.101.2.7.1.1.2INTEGER {ac(0), rbu(1)}read-onlycurrent
sleOperationPowerInfo
OBJECT-TYPE
Operation Power Info.
1.3.6.1.4.1.6296.101.2.7.1.1.3OCTET STRINGread-onlycurrent
slePSUACPowerState
OBJECT-TYPE
Power State.
1.3.6.1.4.1.6296.101.2.7.1.1.4INTEGER {ok(0), fault(1)}read-onlycurrent
slePSUTemperture
OBJECT-TYPE
Temperture.
1.3.6.1.4.1.6296.101.2.7.1.1.5Integer32read-onlycurrent
slePSUTempThreshold
OBJECT-TYPE
Temperture Threshold.
1.3.6.1.4.1.6296.101.2.7.1.1.6Integer32read-onlycurrent
slePSUOutVoltage
OBJECT-TYPE
Voltage.
1.3.6.1.4.1.6296.101.2.7.1.1.7OCTET STRINGread-onlycurrent
slePSUOverTemp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.1.1.8INTEGER {normal(0), over(1)}read-onlycurrent
slePSUFirmwareVer
OBJECT-TYPE
The firmware version of battery charger for communication to system.
1.3.6.1.4.1.6296.101.2.7.1.1.9Integer32read-onlycurrent
sleRBUEquipState
OBJECT-TYPE
Equipment State.
1.3.6.1.4.1.6296.101.2.7.1.1.10INTEGER {equipped(0), empty(1)}read-onlycurrent
sleRBUModeStaus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.1.1.11OCTET STRINGread-onlycurrent
sleRBUTemperature1
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.1.1.12Integer32read-onlycurrent
sleRBUTemperature2
OBJECT-TYPE
.
1.3.6.1.4.1.6296.101.2.7.1.1.13Integer32read-onlycurrent
sleRBUTempLowThreshold
OBJECT-TYPE
RBU Low Temperature Threshold.
1.3.6.1.4.1.6296.101.2.7.1.1.14Integer32read-onlycurrent
sleRBUOutVoltage
OBJECT-TYPE
RBU Out Voltage.
1.3.6.1.4.1.6296.101.2.7.1.1.15OCTET STRINGread-onlycurrent
sleRBUChargeCurrent
OBJECT-TYPE
Current Charge.
1.3.6.1.4.1.6296.101.2.7.1.1.16Integer32read-onlycurrent
sleRBURemainCapacity
OBJECT-TYPE
Remain Capacity.
1.3.6.1.4.1.6296.101.2.7.1.1.17Integer32read-onlycurrent
sleRBUOverTemp
OBJECT-TYPE
The state of Temperature over.
1.3.6.1.4.1.6296.101.2.7.1.1.18INTEGER {normal(0), over(1), under(2)}read-onlycurrent
sleBatteryLow
OBJECT-TYPE
Battery state.
1.3.6.1.4.1.6296.101.2.7.1.1.19INTEGER {normal(0), low(1), notAvailable(2)}read-onlycurrent
sleRBUTempHighThreshold
OBJECT-TYPE
RBU High Temperature Threshold.
1.3.6.1.4.1.6296.101.2.7.1.1.20Integer32read-onlycurrent
sleRBUBTStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.1.1.21INTEGER {enable(1), disable(2)}read-onlycurrent
sleRBUBTThreshold
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.1.1.22Integer32read-onlycurrent
sleRBURechargeVoltage
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.1.1.23Integer32read-onlycurrent
sleBatteryCellStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.1.1.24INTEGER {ok(1), failure(2)}read-onlycurrent
sleBPSUACHardwareVer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.1.1.25Integer32read-onlycurrent
sleBatteryControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.7.2
sleBatteryControlRequest
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.2.1INTEGER {setBatteryForceCharge(1), setBatteryChargingStart(2), setBatteryForceChargeNonStop(3), setBatteryBootingTimeStatus(4), setBatteryBootingTime(5), setBatteryRechargeVoltage(6), setPsuAcTemperature(7), setBatteryTemperature(8)}read-writecurrent
sleBatteryControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.2.2Integer32read-writecurrent
sleBatteryControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.2.3Integer32read-writecurrent
sleBatteryControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.2.4Integer32read-writecurrent
sleBatteryControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.2.5Integer32read-writecurrent
sleBatteryControlRBUBTStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.2.6INTEGER {enable(1), disable(2)}read-writecurrent
sleBatteryControlRBUBTThreshold
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.2.7Integer32read-writecurrent
sleBatteryControlRBURechargeVoltage
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.2.8Integer32read-writecurrent
sleBatteryControlTemperThresh1
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.2.9Integer32read-writecurrent
sleBatteryControlTemperThresh2
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.2.10Integer32read-writecurrent
sleBatteryNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.7.3
sleBatteryBackupTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.4not-accessiblecurrent
sleBatteryBackupEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.4.1not-accessiblecurrent
sleBatteryBackupFile
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.4.1.1OCTET STRING (SIZE(1..64))read-onlycurrent
sleBatteryBackupControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.7.5
sleBatteryBackupControlRequest
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.5.1INTEGER {setBatteryBackupProfile(1), setBatteryUpgrade(2), clearBatteryBackupTable(3)}read-writecurrent
sleBatteryBackupControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.5.2SleControlStatusTyperead-onlycurrent
sleBatteryBackupControlTimer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.5.3Gauge32read-writecurrent
sleBatteryBackupControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.5.4TimeTicksread-onlycurrent
sleBatteryBackupControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.5.5SleControlRequestResultTyperead-onlycurrent
sleBatteryBackupControlServerIP
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.5.6IpAddressread-writecurrent
sleBatteryBackupControlUserID
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.5.7OCTET STRING (SIZE(1..64))read-writecurrent
sleBatteryBackupControlPassword
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.5.8OCTET STRING (SIZE(1..64))read-writecurrent
sleBatteryBackupControlFlag
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.5.9INTEGER {download(1), upload(2)}read-writecurrent
sleBatteryBackupControlLocalFile
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.5.10OCTET STRING (SIZE(1..64))read-writecurrent
sleBatteryBackupControlRemoteFile
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.5.11OCTET STRING (SIZE(1..64))read-writecurrent
sleBatterBackupNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.7.6
sleDoor
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.8
sleDoorInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.8.1
sleDoorStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.8.1.1INTEGER {close(0), open(1)}read-onlycurrent
sleCpu
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.9
sleCpuInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.9.1
sleCpuProcessor
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.9.1.1OCTET STRINGread-onlycurrent
sleCpuModel
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.9.1.2OCTET STRINGread-onlycurrent
sleCpuRevision
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.9.1.3OCTET STRINGread-onlycurrent
sleCpuBogomips
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.9.1.4OCTET STRINGread-onlycurrent
sleCpuManufacturer
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.9.1.5OCTET STRINGread-onlycurrent
sleCpuClock
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.9.1.6Integer32read-onlycurrent
sleCpuBusClock
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.9.1.7Integer32read-onlycurrent
sleClockModule
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.10
sleClockModuleTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.10.1not-accessiblecurrent
sleClockModuleEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.10.1.1not-accessiblecurrent
sleClockModuleIndex
OBJECT-TYPE
A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1.
1.3.6.1.4.1.6296.101.2.10.1.1.1INTEGER (1..255)read-onlycurrent
sleClockModuleBoardId
OBJECT-TYPE
Indication of the board identifier.
1.3.6.1.4.1.6296.101.2.10.1.1.2INTEGER {sfuA(1), sfuB(2)}read-onlycurrent
sleClockModuleInstallStatus
OBJECT-TYPE
The install status of clock module.
1.3.6.1.4.1.6296.101.2.10.1.1.3INTEGER {removed(0), installed(1)}read-onlycurrent
sleClockModuleInitStatus
OBJECT-TYPE
The initialization status of clock module.
1.3.6.1.4.1.6296.101.2.10.1.1.4INTEGER {failure(0), ok(1)}read-onlycurrent
sleClockModuleOPMode
OBJECT-TYPE
The CM operating mode
1.3.6.1.4.1.6296.101.2.10.1.1.5INTEGER {freerun(1), holdover(2), locked(3), prelocked2(4), prelocked(5), lostphase(6), unknown(255)}read-writecurrent
sleClockInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.10.2
sleClockInfoInSrcType
OBJECT-TYPE
The clock input source type.
1.3.6.1.4.1.6296.101.2.10.2.1INTEGER {ntt(1), ntt2(2), e1(3), t1(4), unknown(255)}accessible-for-notifycurrent
sleClockInfoInSrcStatus
OBJECT-TYPE
The input source is Valid or Invalid.
1.3.6.1.4.1.6296.101.2.10.2.2INTEGER {true(1), false(2)}accessible-for-notifycurrent
sleClockInfoInSrcAISStatus
OBJECT-TYPE
The AIS is detected or not detected.
1.3.6.1.4.1.6296.101.2.10.2.3INTEGER {true(1), false(2)}accessible-for-notifycurrent
sleClockInfoInSrcLoSStatus
OBJECT-TYPE
The LoS is detected or not detected
1.3.6.1.4.1.6296.101.2.10.2.4INTEGER {true(1), false(2)}accessible-for-notifycurrent
sleClockInfoInSrcLDSCStatus
OBJECT-TYPE
The Line Driver Short Circuit is detected or not detected
1.3.6.1.4.1.6296.101.2.10.2.5INTEGER {true(1), false(2)}accessible-for-notifycurrent
sleClockInfoInSrcNtrClockType
OBJECT-TYPE
The ntr clock is changed.
1.3.6.1.4.1.6296.101.2.10.2.6Bits {bit64Khz(0), bit8Khz(1), bit04Khz(2)}accessible-for-notifycurrent
sleSlot
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.11
sleSlotSystemInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.11.1
sleSlotSystemInfoTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.1.1not-accessiblecurrent
sleSlotSystemInfoEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.1.1.1not-accessiblecurrent
sleSlotSystemIndex
OBJECT-TYPE
The system slot index.
1.3.6.1.4.1.6296.101.2.11.1.1.1.1Integer32 (1..8)read-onlycurrent
sleSlotSystemUptime
OBJECT-TYPE
The time since the network management portion of the system was last re-initialized.
1.3.6.1.4.1.6296.101.2.11.1.1.1.2TimeTicksread-onlycurrent
sleSlotSystemModelName
OBJECT-TYPE
The model name.
1.3.6.1.4.1.6296.101.2.11.1.1.1.3OCTET STRINGread-onlycurrent
sleSlotSystemSerialNumber
OBJECT-TYPE
The serial number
1.3.6.1.4.1.6296.101.2.11.1.1.1.4OCTET STRINGread-onlycurrent
sleSlotSystemHWVersion
OBJECT-TYPE
The H/W version.
1.3.6.1.4.1.6296.101.2.11.1.1.1.5OCTET STRINGread-onlycurrent
sleSlotSystemBLVersion
OBJECT-TYPE
The boot loader's S/W version.
1.3.6.1.4.1.6296.101.2.11.1.1.1.6OCTET STRINGread-onlycurrent
sleSlotSystemSWCompatibility
OBJECT-TYPE
The system compatibility.
1.3.6.1.4.1.6296.101.2.11.1.1.1.7OCTET STRINGread-onlycurrent
sleSlotSystemOSVersion
OBJECT-TYPE
The version information of current os.
1.3.6.1.4.1.6296.101.2.11.1.1.1.8OCTET STRINGread-onlycurrent
sleSlotSystemMacAddress
OBJECT-TYPE
The system's MAC address.
1.3.6.1.4.1.6296.101.2.11.1.1.1.9OCTET STRINGread-onlycurrent
sleSlotSystemCPULoadAll
OBJECT-TYPE
The CPU all load for 5/60/600 second. (unit: 0.01%)
1.3.6.1.4.1.6296.101.2.11.1.1.1.10OCTET STRINGread-onlycurrent
sleSlotSystemCPULoadInterrupt
OBJECT-TYPE
The CPU interrupt load for 5/60/600 second. (unit: 0.01%)
1.3.6.1.4.1.6296.101.2.11.1.1.1.11OCTET STRINGread-onlycurrent
sleSlotSystemMemoryTotal
OBJECT-TYPE
The total memory size (unit: kb)
1.3.6.1.4.1.6296.101.2.11.1.1.1.12Gauge32read-onlycurrent
sleSlotSystemMemoryFree
OBJECT-TYPE
The freed memory size (unit: kb)
1.3.6.1.4.1.6296.101.2.11.1.1.1.13Gauge32read-onlycurrent
sleSlotSystemMemoryShared
OBJECT-TYPE
The shared memory size (unit: kb)
1.3.6.1.4.1.6296.101.2.11.1.1.1.14Gauge32read-onlycurrent
sleSlotSystemMemoryBuffers
OBJECT-TYPE
The buffer size (unit: kb)
1.3.6.1.4.1.6296.101.2.11.1.1.1.15Gauge32read-onlycurrent
sleSlotSystemMemoryCached
OBJECT-TYPE
The cached memory size (unit: kb)
1.3.6.1.4.1.6296.101.2.11.1.1.1.16Gauge32read-onlycurrent
sleSlotSystemMemorySwapTotal
OBJECT-TYPE
The total swap memory size (unit: kb)
1.3.6.1.4.1.6296.101.2.11.1.1.1.17Gauge32read-onlycurrent
sleSlotSystemMemorySwapFree
OBJECT-TYPE
The freed swap memory size (unit: kb)
1.3.6.1.4.1.6296.101.2.11.1.1.1.18Gauge32read-onlycurrent
sleSlotSystemBootReason
OBJECT-TYPE
The system slot boot reason.
1.3.6.1.4.1.6296.101.2.11.1.1.1.19INTEGER {powerBoot(1), powerBootByLocal(2), hwResetBySW(3), hardWdogByLocal(4), hwRebootByMate(5), hwRebootBySwitchover(6), swReboot(10), swRebootByLocal(11), swRebootBySFU(12), swRebootBySwitchover(13), swRebootByPanic(14), watchdog(20), watchdogByLocal(21), swWatchdog(30), swWatchdogByCpuOver(31), swWatchdogByMemoryLow(32), error(255)}read-onlycurrent
sleSlotSystemBootTime
OBJECT-TYPE
The system slot boot time. The time since the Epoch (00:00:00 UTC, January 1, 1970), measured in seconds.
1.3.6.1.4.1.6296.101.2.11.1.1.1.20Gauge32read-onlycurrent
sleSlotSystemVoltage
OBJECT-TYPE
The system slot voltage.
1.3.6.1.4.1.6296.101.2.11.1.1.1.21Gauge32read-onlycurrent
sleSlotSystemPowerLevelStatus
OBJECT-TYPE
PCB Power level status.
1.3.6.1.4.1.6296.101.2.11.1.1.1.22INTEGER {good(1), bad(2)}read-onlycurrent
sleSlotSystemInfoLEDStatus
OBJECT-TYPE
The LED status of each slot.
1.3.6.1.4.1.6296.101.2.11.1.1.1.23Bits {pwr(0), run(1), critical(2), major(3), minor(4), error(5)}read-onlycurrent
sleSlotSystemInfoPackageVersion
OBJECT-TYPE
The applied package revision.
1.3.6.1.4.1.6296.101.2.11.1.1.1.24OCTET STRINGread-onlycurrent
sleSlotSystemInfoManufacturer
OBJECT-TYPE
Ths manufacturer name and country.
1.3.6.1.4.1.6296.101.2.11.1.1.1.25OCTET STRINGread-onlycurrent
sleSlotSystemInfoManufactureDate
OBJECT-TYPE
Ths manufacture date.
1.3.6.1.4.1.6296.101.2.11.1.1.1.26OCTET STRINGread-onlycurrent
sleSlotSystemCPULoadHighThreshold
OBJECT-TYPE
The high threshold of CPU load (70:default)
1.3.6.1.4.1.6296.101.2.11.1.1.1.27Integer32read-onlycurrent
sleSlotSystemCPULoadHighThresholdTimer
OBJECT-TYPE
The high threshold timer of CPU load (sec) (60:default)
1.3.6.1.4.1.6296.101.2.11.1.1.1.28INTEGER {timerInverval5(1), timerInverval60(2), timerInverval600(3)}read-onlycurrent
sleSlotSystemCPULoadLowThreshold
OBJECT-TYPE
The low threshold of CPU load (30:default)
1.3.6.1.4.1.6296.101.2.11.1.1.1.29Integer32read-onlycurrent
sleSlotSystemCPULoadLowThresholdTimer
OBJECT-TYPE
The low threshold timer of CPU load (sec) (60:default)
1.3.6.1.4.1.6296.101.2.11.1.1.1.30INTEGER {timerInverval5(1), timerInverval60(2), timerInverval600(3)}read-onlycurrent
sleSlotSystemCPULoadCurrent
OBJECT-TYPE
The CPU load currnet value (only used for trap)
1.3.6.1.4.1.6296.101.2.11.1.1.1.31Integer32read-onlycurrent
sleSlotSystemCPUOverallStatus
OBJECT-TYPE
The CPU Overall status for SFU & IU
1.3.6.1.4.1.6296.101.2.11.1.1.1.32INTEGER {good(1), bad(2)}read-onlycurrent
sleSlotSystemTemperOverallStatus
OBJECT-TYPE
The Temperature Overall status for SFU & IU
1.3.6.1.4.1.6296.101.2.11.1.1.1.33INTEGER {good(1), bad(2)}read-onlycurrent
sleSlotSystemControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.11.1.2
sleSlotSystemControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.101.2.11.1.2.1INTEGER {setSlotRestart(1), setSlotCpuloadThreshold(2), delSlotCpuloadThreshold(3)}read-writecurrent
sleSlotSystemControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.101.2.11.1.2.2SleControlStatusTyperead-onlycurrent
sleSlotSystemControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.101.2.11.1.2.3Gauge32read-writecurrent
sleSlotSystemControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.101.2.11.1.2.4TimeTicksread-onlycurrent
sleSlotSystemControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.101.2.11.1.2.5SleControlRequestResultTyperead-onlycurrent
sleSlotSystemControlSlotIndex
OBJECT-TYPE
The system slot index.
1.3.6.1.4.1.6296.101.2.11.1.2.6Integer32read-writecurrent
sleSlotSystemControlCPULoadHighThreshold
OBJECT-TYPE
The high threshold of CPU load (70:default)
1.3.6.1.4.1.6296.101.2.11.1.2.7Integer32 (21..100)read-writecurrent
sleSlotSystemControlCPULoadHighThresholdTimer
OBJECT-TYPE
The high threshold timer of CPU load (sec) (60:default)
1.3.6.1.4.1.6296.101.2.11.1.2.8INTEGER {timerInverval5(1), timerInverval60(2), timerInverval600(3)}read-writecurrent
sleSlotSystemControlCPULoadLowThreshold
OBJECT-TYPE
The low threshold of CPU load (30:default)
1.3.6.1.4.1.6296.101.2.11.1.2.9Integer32 (20..100)read-writecurrent
sleSlotSystemControlCPULoadLowThresholdTimer
OBJECT-TYPE
The low threshold timer of CPU load (sec) (60:default)
1.3.6.1.4.1.6296.101.2.11.1.2.10INTEGER {timerInverval5(1), timerInverval60(2), timerInverval600(3)}read-writecurrent
sleSlotSystemNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.11.1.3
sleSlotStatusInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.11.2
sleSlotStatusInfoTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.2.1not-accessiblecurrent
sleSlotStatusInfoEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.2.1.1not-accessiblecurrent
sleSlotStatusPlan
OBJECT-TYPE
Planning status of slot.
1.3.6.1.4.1.6296.101.2.11.2.1.1.1INTEGER {notPlanned(1), planned(2)}read-onlycurrent
sleSlotStatusPlanCardType
OBJECT-TYPE
Planning card type status of slot.
1.3.6.1.4.1.6296.101.2.11.2.1.1.2INTEGER {unknown(1), siuGE12(2), siuEPON12(3), siuGPON4(4), niuGE12(5), sfu(6), v5548gGE12(7), siuGPON4r(8), niuGE8(9), siuGE4(10), niu10GPlus(11), iu10GE(12), iuGE6(13), iuGE4(14), siuTDM(15), siuGE24(16), siuFE48(17), niu10GE2(18), siu10GE48(19), siuGE10(20), niu10Ge2Plus(21), iuGT4(22), iuGT6(23), iuTDM6(24), siuGE6(25), siuGE8(26), siuGT6(27), niuGE2(28), niuGE4(29), iuGEPON4(30), iu10GE8(31), iuGEPON8(32), iu10GEPON8(33), iuGE8(34), siu10GEPON8(35), niu10GE4(36), sfu10GE4(37), siuGPON16(38), iu10GE4(39), siuGT24(40), iu10GE2(41), cwdm(42), iuGT8(43)}read-onlycurrent
sleSlotStatusCurrentInstall
OBJECT-TYPE
Currently installation status of slot.
1.3.6.1.4.1.6296.101.2.11.2.1.1.3INTEGER {notInstalled(1), installed(2), failed(3)}read-onlycurrent
sleSlotStatusCurrentInstallCardType
OBJECT-TYPE
Currently installation card type status of slot.
1.3.6.1.4.1.6296.101.2.11.2.1.1.4INTEGER {unknown(1), siuGE12(2), siuEPON12(3), siuGPON4(4), niuGE12(5), sfu(6), v5548gGE12(7), siuGPON4r(8), niuGE8(9), siuGE4(10), niu10GPlus(11), iuGE10(12), iuGE6(13), iuGE4(14), siuTDM(15), siuGE24(16), siuFE48(17), niu10GE2(18), siu10GE48(19), siuGE10(20), niu10Ge2Plus(21), iuGT4(22), iuGT6(23), iuTDM6(24), siuGE6(25), siuGE8(26), siuGT6(27), niuGE2(28), niuGE4(29), iuGEPON4(30), iu10GE8(31), iuGEPON8(32), iu10GEPON8(33), iuGE8(34), siu10GEPON8(35), niu10GE4(36), sfu10GE4(37), siuGPON16(38), iu10GE4(39), siuGT24(40), iu10GE2(41), cwdm(42), iuGT8(43)}read-onlycurrent
sleSlotStatusCardOperation
OBJECT-TYPE
Currently operation status of slot.
1.3.6.1.4.1.6296.101.2.11.2.1.1.5INTEGER {disable(1), init(2), enable(3), enableActive(4), enableStandby(5)}read-onlycurrent
sleSlotStatusLock
OBJECT-TYPE
Lock status of slot.
1.3.6.1.4.1.6296.101.2.11.2.1.1.6INTEGER {unlocked(1), locked(2)}read-onlycurrent
sleSlotStatusUpgradeMode
OBJECT-TYPE
Upgrade mode status of slot.
1.3.6.1.4.1.6296.101.2.11.2.1.1.7INTEGER {manual(1), auto(2)}read-onlycurrent
sleSlotStatusActionEvent
OBJECT-TYPE
Event of slot. (accessible-for-notify)
1.3.6.1.4.1.6296.101.2.11.2.1.1.8INTEGER {uninstallAction(1), installAction(2), noPlanningAction(3), planningAction(4), lockAction(5), unlockAction(6), matchedEvent(7), unMatchedEvent(8), bootEndEvent(9), configEndEvent(10), configFailEvent(11)}accessible-for-notifycurrent
sleSlotStatusState
OBJECT-TYPE
Status of slot. (accessible-for-notify)
1.3.6.1.4.1.6296.101.2.11.2.1.1.9INTEGER {default(1), planningWait(2), installWait(3), operationReady(4), actionBootReady(5), actionConfig(6), actionEnableReady(7), actionEnable(8), actionEnableLock(9), actionDisable(10)}accessible-for-notifycurrent
sleSlotStatusPower
OBJECT-TYPE
Currently power status of slot.
1.3.6.1.4.1.6296.101.2.11.2.1.1.10INTEGER {up(1), down(2)}read-onlycurrent
sleSlotStatusSerialNumber
OBJECT-TYPE
The serial number
1.3.6.1.4.1.6296.101.2.11.2.1.1.11OCTET STRINGread-onlycurrent
sleSlotStatusHealthState
OBJECT-TYPE
The slot health status
1.3.6.1.4.1.6296.101.2.11.2.1.1.12INTEGER {well(0), warning(1), timeout(2)}read-onlycurrent
sleslotStatusOverallState
OBJECT-TYPE
The slot overrall status
1.3.6.1.4.1.6296.101.2.11.2.1.1.13INTEGER {good(0), bad(1)}read-onlycurrent
sleslotStatusSyncState
OBJECT-TYPE
The slot sync status
1.3.6.1.4.1.6296.101.2.11.2.1.1.14INTEGER {none(0), disable(1), process(2), done(3)}read-onlycurrent
sleSlotStatusControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.11.2.2
sleSlotStatusControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.101.2.11.2.2.1INTEGER {setSlotLock(1), setSlotUnlock(2), setSlotPlanning(3), setSlotNoplanning(4), setSlotUpgradeMode(5), setSlotPowerUp(6), setSlotPowerDown(7), setSlotPowerReset(8)}read-writecurrent
sleSlotStatusControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.101.2.11.2.2.2SleControlStatusTyperead-onlycurrent
sleSlotStatusControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.101.2.11.2.2.3Gauge32read-writecurrent
sleSlotStatusControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.101.2.11.2.2.4TimeTicksread-onlycurrent
sleSlotStatusControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.101.2.11.2.2.5SleControlRequestResultTyperead-onlycurrent
sleSlotStatusControlSlotIndex
OBJECT-TYPE
The system slot index. 255 is means all slot.
1.3.6.1.4.1.6296.101.2.11.2.2.6Integer32read-writecurrent
sleSlotStatusControlPlanCardType
OBJECT-TYPE
Planning card type status of slot.
1.3.6.1.4.1.6296.101.2.11.2.2.7INTEGER {unknown(1), siuGE12(2), siuEPON12(3), siuGPON4(4), niuGE12(5), sfu(6), v5548gGE12(7), siuGPON4r(8), niuGE8(9), siuGE4(10), niu10GPlus(11), iuGE10(12), iuGE6(13), iuGE4(14), siuTDM(15), siuGE24(16), siuFE48(17), niu10GE2(18), siu10GE48(19), siuGE10(20), niu10Ge2Plus(21), iuGT4(22), iuGT6(23), iuTDM6(24), siuGE6(25), siuGE8(26), siuGT6(27), niuGE2(28), niuGE4(29), iuGEPON4(30), iu10GE8(31), iuGEPON8(32), iu10GEPON8(33), iuGE8(34), siu10GEPON8(35), niu10GE4(36), sfu10GE4(37), siuGPON16(38), iu10GE4(39), siuGT24(40), iu10GE2(41), cwdm(42), iuGT8(43)}read-writecurrent
sleSlotStatusControlUpgradeMode
OBJECT-TYPE
Upgrade mode status of slot.
1.3.6.1.4.1.6296.101.2.11.2.2.8INTEGER {manual(1), auto(2), autoUpgradeManualReset(3)}read-writecurrent
sleSlotStatusNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.11.2.3
sleSlotNosInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.11.3
sleSlotNosInfoTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.3.1not-accessiblecurrent
sleSlotNosInfoEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.3.1.1not-accessiblecurrent
sleSlotNosVersion
OBJECT-TYPE
NOS version of slot.
1.3.6.1.4.1.6296.101.2.11.3.1.1.1OCTET STRINGread-onlycurrent
sleSlotNosRevision
OBJECT-TYPE
NOS revision of slot.
1.3.6.1.4.1.6296.101.2.11.3.1.1.2OCTET STRINGread-onlycurrent
sleSlotNosSize
OBJECT-TYPE
NOS size of slot.
1.3.6.1.4.1.6296.101.2.11.3.1.1.3Unsigned32read-onlycurrent
sleSlotNosUpgradeStatus
OBJECT-TYPE
NOS upgrade status of slot.
1.3.6.1.4.1.6296.101.2.11.3.1.1.4INTEGER {upgradeIdle(1), upgradeStart(2), upgradeDone(3), upgradeFail(4)}read-onlycurrent
sleSlotNosStbVersion
OBJECT-TYPE
Stand by NOS version of slot
1.3.6.1.4.1.6296.101.2.11.3.1.1.5OCTET STRINGread-onlycurrent
sleSlotNosStbRevision
OBJECT-TYPE
Stand by NOS revision of slot.
1.3.6.1.4.1.6296.101.2.11.3.1.1.6OCTET STRINGread-onlycurrent
sleSlotNosStbSize
OBJECT-TYPE
Stand by NOS size of slot.
1.3.6.1.4.1.6296.101.2.11.3.1.1.7Unsigned32read-onlycurrent
sleSlotNosControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.11.3.2
sleSlotNosControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.101.2.11.3.2.1INTEGER {setSlotUpgarde(1), downloadSlotNos(2), upgradeSlotBootloader(3)}read-writecurrent
sleSlotNosControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.101.2.11.3.2.2SleControlStatusTyperead-onlycurrent
sleSlotNosControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.101.2.11.3.2.3Gauge32read-writecurrent
sleSlotNosControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.101.2.11.3.2.4TimeTicksread-onlycurrent
sleSlotNosControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.101.2.11.3.2.5SleControlRequestResultTyperead-onlycurrent
sleSlotNosControlSlotIndex
OBJECT-TYPE
The system slot index.
1.3.6.1.4.1.6296.101.2.11.3.2.6Integer32read-writecurrent
sleSlotNosControlUpDownMethod
OBJECT-TYPE
1: using FTP 2: using TFTP
1.3.6.1.4.1.6296.101.2.11.3.2.7INTEGER {ftp(1), tftp(2)}read-writecurrent
sleSlotNosControlUpDownFlag
OBJECT-TYPE
1. Uploading slot nos to the remote-host. 2. Downloading slot nos from the remote-host.
1.3.6.1.4.1.6296.101.2.11.3.2.8INTEGER {upload(1), download(2)}read-writecurrent
sleSlotNosControlServerAddress
OBJECT-TYPE
The remote-host's IP address.
1.3.6.1.4.1.6296.101.2.11.3.2.9IpAddressread-writecurrent
sleSlotNosControlUserID
OBJECT-TYPE
Account-name.
1.3.6.1.4.1.6296.101.2.11.3.2.10OCTET STRINGread-writecurrent
sleSlotNosControlPassword
OBJECT-TYPE
Account-password.
1.3.6.1.4.1.6296.101.2.11.3.2.11OCTET STRINGread-writecurrent
sleSlotNosControlFileName
OBJECT-TYPE
Slot nos file name.
1.3.6.1.4.1.6296.101.2.11.3.2.12OCTET STRINGread-writecurrent
sleSlotNosNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.11.3.3
sleSlotReleasedIUNosInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.11.4
sleSlotReleasedNIUNosVersion
OBJECT-TYPE
Released NIU NOS image version on SFU.
1.3.6.1.4.1.6296.101.2.11.4.1OCTET STRINGread-onlycurrent
sleSlotReleasedNIUNosRevision
OBJECT-TYPE
Released NIU NOS image revision on SFU.
1.3.6.1.4.1.6296.101.2.11.4.2OCTET STRINGread-onlycurrent
sleSlotReleasedNIUNosSize
OBJECT-TYPE
Released NIU NOS image size on SFU.
1.3.6.1.4.1.6296.101.2.11.4.3Unsigned32read-onlycurrent
sleSlotReleasedGPIUNosVersion
OBJECT-TYPE
Released GPIU NOS image version on SFU.
1.3.6.1.4.1.6296.101.2.11.4.4OCTET STRINGread-onlycurrent
sleSlotReleasedGPIUNosRevision
OBJECT-TYPE
Released GPIU NOS image revision on SFU.
1.3.6.1.4.1.6296.101.2.11.4.5OCTET STRINGread-onlycurrent
sleSlotReleasedGPIUNosSize
OBJECT-TYPE
Released GPIU NOS image size on SFU.
1.3.6.1.4.1.6296.101.2.11.4.6Unsigned32read-onlycurrent
sleSlotReleasedSIUNosVersion
OBJECT-TYPE
Released SIU NOS image version on SFU.
1.3.6.1.4.1.6296.101.2.11.4.7OCTET STRINGread-onlycurrent
sleSlotReleasedSIUNosRevision
OBJECT-TYPE
Released SIU NOS image revision on SFU.
1.3.6.1.4.1.6296.101.2.11.4.8OCTET STRINGread-onlycurrent
sleSlotReleasedSIUNosSize
OBJECT-TYPE
Released SIU NOS image size on SFU.
1.3.6.1.4.1.6296.101.2.11.4.9Integer32read-onlycurrent
sleSlotReleasedIU10GE8NosVersion
OBJECT-TYPE
Released IU_10GE8 NOS image version on SFU.
1.3.6.1.4.1.6296.101.2.11.4.10OCTET STRINGread-onlycurrent
sleSlotReleasedIU10GE8NosRevision
OBJECT-TYPE
Released IU_10GE8 NOS image revision on SFU.
1.3.6.1.4.1.6296.101.2.11.4.11OCTET STRINGread-onlycurrent
sleSlotReleasedIU10GE8NosSize
OBJECT-TYPE
Released IU_10GE8 NOS image size on SFU.
1.3.6.1.4.1.6296.101.2.11.4.12Integer32read-onlycurrent
sleSlotReleasedIU10GEPON8NosVersion
OBJECT-TYPE
Released IU_10GEPON8 NOS image version on SFU.
1.3.6.1.4.1.6296.101.2.11.4.13OCTET STRINGread-onlycurrent
sleSlotReleasedIU10GEPON8NosRevision
OBJECT-TYPE
Released IU_10GEPON8 NOS image revision on SFU.
1.3.6.1.4.1.6296.101.2.11.4.14OCTET STRINGread-onlycurrent
sleSlotReleasedIU10GEPON8NosSize
OBJECT-TYPE
Released IU_10GEPON8 NOS image size on SFU.
1.3.6.1.4.1.6296.101.2.11.4.15Integer32read-onlycurrent
sleSlotReleasedIUGEPON8NosVersion
OBJECT-TYPE
Released IU_GEPON8 NOS image version on SFU.
1.3.6.1.4.1.6296.101.2.11.4.16OCTET STRINGread-onlycurrent
sleSlotReleasedIUGEPON8NosRevision
OBJECT-TYPE
Released IU_GEPON8 NOS image revision on SFU
1.3.6.1.4.1.6296.101.2.11.4.17OCTET STRINGread-onlycurrent
sleSlotReleasedIUGEPON8NosSize
OBJECT-TYPE
Released IU_GEPON8 NOS image size on SFU.
1.3.6.1.4.1.6296.101.2.11.4.18Integer32read-onlycurrent
sleSlotPowerMon
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.11.5
sleSlotPowerMonTable
OBJECT-TYPE
The Power-Monitoring table.
1.3.6.1.4.1.6296.101.2.11.5.1not-accessiblecurrent
sleSlotPowerMonEntry
OBJECT-TYPE
The Power-Monitoring entry.
1.3.6.1.4.1.6296.101.2.11.5.1.1not-accessiblecurrent
sleSlotPowerMonIndex
OBJECT-TYPE
The physical index of power-monitoring object.
1.3.6.1.4.1.6296.101.2.11.5.1.1.1INTEGER (1..255)read-onlycurrent
sleSlotPowerMonStatus
OBJECT-TYPE
The monitoring status of power-monitoring object.
1.3.6.1.4.1.6296.101.2.11.5.1.1.2INTEGER {unknown(1), good(2), bad(3), over(4), under(5), overUnder(6)}read-onlycurrent
sleSlotPowerMonVoltage
OBJECT-TYPE
The voltage value of power-monitoring object. value 10000(1000v) indicate that FUSE.
1.3.6.1.4.1.6296.101.2.11.5.1.1.3Gauge32read-onlycurrent
sleSlotAiu
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.11.6
sleSlotAiuRunStatus
OBJECT-TYPE
The slot AIU run status.
1.3.6.1.4.1.6296.101.2.11.6.1INTEGER {off(0), on(1)}read-onlycurrent
sleSlotAiuAlarmStatus
OBJECT-TYPE
The slot AIU alarm status.
1.3.6.1.4.1.6296.101.2.11.6.2INTEGER {off(0), on(1)}read-onlycurrent
sleSlotProtection
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.11.7
sleSlotProtectionBase
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.11.7.1
sleSlotProtectionInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.11.7.1.1
sleSlotProtectionSystemStatus
OBJECT-TYPE
The system admin status(enable or disable) of overtemperature shutdown function.
1.3.6.1.4.1.6296.101.2.11.7.1.1.1INTEGER {enable(1), disable(2)}read-onlycurrent
sleSlotProtectionSystemThreshold
OBJECT-TYPE
The system admin threshold of overtemperature shutdown function.
1.3.6.1.4.1.6296.101.2.11.7.1.1.2Integer32read-onlycurrent
sleSlotProtectionIUPowerStatus
OBJECT-TYPE
The slot power shutdown status
1.3.6.1.4.1.6296.101.2.11.7.1.1.3INTEGER {enable(1), disable(2)}read-writecurrent
sleSlotProtectionControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.11.7.1.2
sleSlotProtectionControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.101.2.11.7.1.2.1INTEGER {setSlotProtectionSystemStatus(1), setSlotProtectionSystemThresh(2), setslotProtectionIUPowerStatus(3)}read-writecurrent
sleSlotProtectionControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.101.2.11.7.1.2.2SleControlStatusTyperead-onlycurrent
sleSlotProtectionControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.101.2.11.7.1.2.3Gauge32read-writecurrent
sleSlotProtectionControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.101.2.11.7.1.2.4TimeTicksread-onlycurrent
sleSlotProtectionControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.101.2.11.7.1.2.5SleControlRequestResultTyperead-onlycurrent
sleSlotProtectionControlSystemStatus
OBJECT-TYPE
The system admin status(enable or disable) of overtemperature shutdown function.
1.3.6.1.4.1.6296.101.2.11.7.1.2.6INTEGER {enable(1), disable(2)}read-writecurrent
sleSlotProtectionControlSystemThreshold
OBJECT-TYPE
The system admin threshold of overtemperature shutdown function.
1.3.6.1.4.1.6296.101.2.11.7.1.2.7Integer32read-writecurrent
sleSlotProtectionControlIUPowerStatus
OBJECT-TYPE
The slot power shutdown status
1.3.6.1.4.1.6296.101.2.11.7.1.2.8INTEGER {enable(1), disable(2)}read-writecurrent
sleSlotProtectionNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.11.7.1.3
sleSlotProtectionIU
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.11.7.2
sleSlotProtectionIUTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.7.2.1not-accessiblecurrent
sleSlotProtectionIUEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.7.2.1.1not-accessiblecurrent
sleSlotProtectionIUTemperHighThresh
OBJECT-TYPE
The Slot temperature High-threshold of overtemperature alarm
1.3.6.1.4.1.6296.101.2.11.7.2.1.1.1Integer32 (1..65535)read-onlycurrent
sleSlotProtectionIUTemperLowThresh
OBJECT-TYPE
The Slot temperature Low-threshold of overtemperature alarm
1.3.6.1.4.1.6296.101.2.11.7.2.1.1.2Integer32 (1..65535)read-onlycurrent
sleSlotProtectionIUPowerThresh
OBJECT-TYPE
The Slot temperature threshold of overtemperature power shutdown.
1.3.6.1.4.1.6296.101.2.11.7.2.1.1.3Integer32 (1..65535)read-onlycurrent
sleSlotProtectionIUTemper
OBJECT-TYPE
The Slot temperature.
1.3.6.1.4.1.6296.101.2.11.7.2.1.1.4Integer32 (1..65535)read-onlycurrent
sleSlotProtectionIUTemper2
OBJECT-TYPE
The Slot temperature2.
1.3.6.1.4.1.6296.101.2.11.7.2.1.1.5Integer32 (1..65535)read-onlycurrent
sleSlotProtectionIUControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.11.7.2.2
sleSlotProtectionIUControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.101.2.11.7.2.2.1INTEGER {setSlotTempThreshold(1), setSlotPowerThresh(2)}read-writecurrent
sleSlotProtectionIUControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.101.2.11.7.2.2.2SleControlStatusTyperead-onlycurrent
sleSlotProtectionIUControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.101.2.11.7.2.2.3Gauge32read-writecurrent
sleSlotProtectionIUControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.101.2.11.7.2.2.4TimeTicksread-onlycurrent
sleSlotProtectionIUControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.101.2.11.7.2.2.5SleControlRequestResultTyperead-onlycurrent
sleSlotProtectionIUControlindex
OBJECT-TYPE
the slot index
1.3.6.1.4.1.6296.101.2.11.7.2.2.6Integer32read-writecurrent
sleSlotProtectionIUControlTemperHighThresh
OBJECT-TYPE
The Slot temperature High-threshold of overtemperature alarm
1.3.6.1.4.1.6296.101.2.11.7.2.2.7Integer32read-writecurrent
sleSlotProtectionIUControlTemperLowThresh
OBJECT-TYPE
The Slot temperature Low-threshold of overtemperature alarm
1.3.6.1.4.1.6296.101.2.11.7.2.2.8Integer32read-writecurrent
sleSlotProtectionIUControlPowerThresh
OBJECT-TYPE
The Slot temperature threshold of overtemperature power shutdown.
1.3.6.1.4.1.6296.101.2.11.7.2.2.9Integer32read-writecurrent
sleSlotProtectionIUNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.11.7.2.3
sleRF
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.12
sleRfBaseInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.12.1
sleRfConnectStatus
OBJECT-TYPE
The RF connect status.
1.3.6.1.4.1.6296.101.2.12.1.1INTEGER {connect(1), disconnect(2)}read-onlycurrent
sleRfPowerStatus
OBJECT-TYPE
The RF power status.
1.3.6.1.4.1.6296.101.2.12.1.2INTEGER {poweroff(0), poweron(1)}read-onlycurrent
sleRfEthertype
OBJECT-TYPE
The RF ethertype.
1.3.6.1.4.1.6296.101.2.12.1.3OCTET STRINGread-onlycurrent
sleRfSrcAddress
OBJECT-TYPE
The RF source address.
1.3.6.1.4.1.6296.101.2.12.1.4OCTET STRINGread-onlycurrent
sleRfDesAddress
OBJECT-TYPE
The RF destination address.
1.3.6.1.4.1.6296.101.2.12.1.5OCTET STRINGread-onlycurrent
sleRfBaseControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.12.2
sleRfBaseControlRequest
OBJECT-TYPE
The request of a user command.
1.3.6.1.4.1.6296.101.2.12.2.1INTEGER {setRfEthertype(1), resetRfEthertype(2)}read-writecurrent
sleRfBaseControlStatus
OBJECT-TYPE
The status of user command.
1.3.6.1.4.1.6296.101.2.12.2.2SleControlStatusTyperead-onlycurrent
sleRfBaseControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command.
1.3.6.1.4.1.6296.101.2.12.2.3Integer32read-writecurrent
sleRfBaseControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command).
1.3.6.1.4.1.6296.101.2.12.2.4TimeTicksread-onlycurrent
sleRfBaseControlReqResult
OBJECT-TYPE
The result of user command.
1.3.6.1.4.1.6296.101.2.12.2.5SleControlRequestResultTyperead-onlycurrent
sleRfBaseControlRfEthertype
OBJECT-TYPE
The Rf ethertype ,the format is 0xXXXX, default value is 0x8864.
1.3.6.1.4.1.6296.101.2.12.2.6OCTET STRINGread-writecurrent
sleRfBaseNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.12.3
sleRfPortTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.12.4not-accessiblecurrent
sleRfPortEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.12.4.1not-accessiblecurrent
sleRfPortIndex
OBJECT-TYPE
The RF port index.
1.3.6.1.4.1.6296.101.2.12.4.1.1INTEGER (1..256)read-writecurrent
sleRfPortAdminStatus
OBJECT-TYPE
The RF port adminStatus.
1.3.6.1.4.1.6296.101.2.12.4.1.2INTEGER {enable(1), disable(2), na(255)}read-writecurrent
sleRfPortOperStatus
OBJECT-TYPE
The RF port operStatus.
1.3.6.1.4.1.6296.101.2.12.4.1.3INTEGER {enable(1), disable(2), na(255)}read-writecurrent
sleRFPortControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.12.5
sleRfPortControlRequest
OBJECT-TYPE
The request of a user command.
1.3.6.1.4.1.6296.101.2.12.5.1INTEGER {setRfPortStatus(1)}read-writecurrent
sleRfPortControlStatus
OBJECT-TYPE
The status of user command.
1.3.6.1.4.1.6296.101.2.12.5.2SleControlStatusTyperead-onlycurrent
sleRfPortControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command.
1.3.6.1.4.1.6296.101.2.12.5.3Integer32read-writecurrent
sleRfPortControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command).
1.3.6.1.4.1.6296.101.2.12.5.4TimeTicksread-onlycurrent
sleRfPortControlReqResult
OBJECT-TYPE
The result of user command.
1.3.6.1.4.1.6296.101.2.12.5.5SleControlRequestResultTyperead-onlycurrent
sleRfPortControlIndex
OBJECT-TYPE
The RF port index <1-8>.
1.3.6.1.4.1.6296.101.2.12.5.6Integer32 (1..8)read-writecurrent
sleRfPortControlAdminStatus
OBJECT-TYPE
The RF port adminStatus.
1.3.6.1.4.1.6296.101.2.12.5.7INTEGER {enable(1), disable(2)}read-writecurrent
sleRFPortNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.12.6
sleEnvironmentMonitor
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.13
sleEMTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.13.1not-accessiblecurrent
sleEMEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.13.1.1not-accessiblecurrent
sleEMInputIndex
OBJECT-TYPE
The environment monitoring input index(1-4).
1.3.6.1.4.1.6296.101.2.13.1.1.1Integer32 (1..4)read-onlycurrent
sleEMAlarmString
OBJECT-TYPE
The alarm string
1.3.6.1.4.1.6296.101.2.13.1.1.2OCTET STRINGread-onlycurrent
sleEMAlarmSeverity
OBJECT-TYPE
The alarm severity.
1.3.6.1.4.1.6296.101.2.13.1.1.3INTEGER {none(0), critical(1), major(2), minor(3), warning(4), intermediate(5)}read-onlycurrent
sleEMmode
OBJECT-TYPE
The environment monitoring mode.(default:normal-close)
1.3.6.1.4.1.6296.101.2.13.1.1.4INTEGER {normalClose(0), normalOpen(1)}read-onlycurrent
sleEMControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.13.2
sleEMControlRequest
OBJECT-TYPE
The request of a user command.
1.3.6.1.4.1.6296.101.2.13.2.1INTEGER {setEM(1), delEM(2)}read-writecurrent
sleEMControlStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.13.2.2SleControlStatusTyperead-onlycurrent
sleEMControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command. Apply your setting.
1.3.6.1.4.1.6296.101.2.13.2.3Gauge32read-onlycurrent
sleEMControlTimeStamp
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.13.2.4TimeTicksread-onlycurrent
sleEMControlReqResult
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.13.2.5SleControlRequestResultTyperead-onlycurrent
sleEMControlInputIndex
OBJECT-TYPE
The environment monitoring input index(1-4).
1.3.6.1.4.1.6296.101.2.13.2.6Integer32 (1..4)read-writecurrent
sleEMControlAlarmString
OBJECT-TYPE
The alarm string
1.3.6.1.4.1.6296.101.2.13.2.7OCTET STRINGread-writecurrent
sleEMControlAlarmSeverity
OBJECT-TYPE
The alarm severity.
1.3.6.1.4.1.6296.101.2.13.2.8INTEGER {none(0), critical(1), major(2), minor(3), warning(4), intermediate(5)}read-writecurrent
sleEMControlmode
OBJECT-TYPE
The environment monitoring mode.(default:normal-close)
1.3.6.1.4.1.6296.101.2.13.2.9INTEGER {normalClose(0), normalOpen(1)}read-writecurrent
sleEMNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.13.3
sleBypass
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.14
sleBypassBase
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.14.1
sleBypassBaseInfo
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.14.1.1
sleBypassMode
OBJECT-TYPE
optic bypass mode
1.3.6.1.4.1.6296.101.2.14.1.1.1INTEGER {on(1), off(2), auto(3)}read-onlycurrent
sleBypassStatus
OBJECT-TYPE
optic bypass status
1.3.6.1.4.1.6296.101.2.14.1.1.2INTEGER {enable(1), disable(2)}read-onlycurrent
sleBypassBaseControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.14.1.2
sleBypassBaseControlRequest
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.14.1.2.1INTEGER {setBypassMode(1)}read-writecurrent
sleBypassBaseControlStatus
OBJECT-TYPE
The status of user command.
1.3.6.1.4.1.6296.101.2.14.1.2.2SleControlStatusTyperead-onlycurrent
sleBypassBaseControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command.
1.3.6.1.4.1.6296.101.2.14.1.2.3Integer32read-writecurrent
sleBypassBaseControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command).
1.3.6.1.4.1.6296.101.2.14.1.2.4TimeTicksread-onlycurrent
sleBypassBaseControlReqResult
OBJECT-TYPE
The result of user command.
1.3.6.1.4.1.6296.101.2.14.1.2.5SleControlRequestResultTyperead-onlycurrent
sleBypassBaseControlMode
OBJECT-TYPE
optic bypass mode
1.3.6.1.4.1.6296.101.2.14.1.2.6INTEGER {on(1), off(2), auto(3)}read-writecurrent
sleBypassBaseNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.14.1.3
sleBypassOption
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.14.2
sleBypassOptionConnectivityTable
OBJECT-TYPE
The connectivity option of bypass
1.3.6.1.4.1.6296.101.2.14.2.1not-accessiblecurrent
sleBypassOptionConnectivityEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.14.2.1.1not-accessiblecurrent
sleBypassOptionConnectivityAddress
OBJECT-TYPE
The target IP address of bypass health-checking
1.3.6.1.4.1.6296.101.2.14.2.1.1.1IpAddressread-onlycurrent
sleBypassOptionConnectivityPort
OBJECT-TYPE
The target port of bypass health-checking.
1.3.6.1.4.1.6296.101.2.14.2.1.1.2Integer32 (1..65535)read-onlycurrent
sleBypassOptionConnectivityControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.14.2.2
sleBypassOptionConnectivityControlRequest
OBJECT-TYPE
setBypassConnectivity(1) : bypass-check-option connectivity (A.B.C.D) PORT unsetBypassConnectivity(2) : no bypass-check option connectivity
1.3.6.1.4.1.6296.101.2.14.2.2.1INTEGER {setBypassConnectivity(1), unsetBypassConnectivity(2)}read-writecurrent
sleBypassOptionConnectivityControlStatus
OBJECT-TYPE
The status of user command.
1.3.6.1.4.1.6296.101.2.14.2.2.2SleControlStatusTyperead-onlycurrent
sleBypassOptionConnectivityControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command.
1.3.6.1.4.1.6296.101.2.14.2.2.3Integer32read-writecurrent
sleBypassOptionConnectivityControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command).
1.3.6.1.4.1.6296.101.2.14.2.2.4TimeTicksread-onlycurrent
sleBypassOptionConnectivityControlReqResult
OBJECT-TYPE
The result of user command.
1.3.6.1.4.1.6296.101.2.14.2.2.5SleControlRequestResultTyperead-onlycurrent
sleBypassOptionConnectivityControlAddress
OBJECT-TYPE
The target IP address of bypass health-checking
1.3.6.1.4.1.6296.101.2.14.2.2.6IpAddressread-writecurrent
sleBypassOptionConnectivityControlPort
OBJECT-TYPE
he target port of bypass health-checking
1.3.6.1.4.1.6296.101.2.14.2.2.7Integer32read-writecurrent
sleBypassOptionConnectivityNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.14.2.3
sleBypassOptionPingTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.14.2.4not-accessiblecurrent
sleBypassOptionPingEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.14.2.4.1not-accessiblecurrent
sleBypassOptionPingAddress
OBJECT-TYPE
The target IP address of bypass ping health checking
1.3.6.1.4.1.6296.101.2.14.2.4.1.1IpAddressread-onlycurrent
sleBypassOptionPingTransInterval
OBJECT-TYPE
The ping transaction interval
1.3.6.1.4.1.6296.101.2.14.2.4.1.2Integer32read-onlycurrent
sleBypassOptionPingTranNumber
OBJECT-TYPE
The ping transaction request number
1.3.6.1.4.1.6296.101.2.14.2.4.1.3Integer32read-onlycurrent
sleBypassOptionPingReqInterval
OBJECT-TYPE
The ping request interval
1.3.6.1.4.1.6296.101.2.14.2.4.1.4Integer32read-onlycurrent
sleBypassOptionPingReqTimeout
OBJECT-TYPE
The ping request timeout
1.3.6.1.4.1.6296.101.2.14.2.4.1.5Integer32read-onlycurrent
sleBypassOptionPingLossThresh
OBJECT-TYPE
The ping loss threshold
1.3.6.1.4.1.6296.101.2.14.2.4.1.6Integer32read-onlycurrent
sleBypassOptionPingControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.14.2.5
sleBypassOptionPingControlRequest
OBJECT-TYPE
The request of a user command.
1.3.6.1.4.1.6296.101.2.14.2.5.1INTEGER {setBypassPing(1), unsetBypassPing(2)}read-writecurrent
sleBypassOptionPingControlStatus
OBJECT-TYPE
The status of user command.
1.3.6.1.4.1.6296.101.2.14.2.5.2SleControlStatusTyperead-onlycurrent
sleBypassOptionPingControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command.
1.3.6.1.4.1.6296.101.2.14.2.5.3Integer32read-writecurrent
sleBypassOptionPingControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command).
1.3.6.1.4.1.6296.101.2.14.2.5.4TimeTicksread-onlycurrent
sleBypassOptionPingControlReqResult
OBJECT-TYPE
The result of user command.
1.3.6.1.4.1.6296.101.2.14.2.5.5SleControlRequestResultTyperead-onlycurrent
sleBypassOptionPingControlAddress
OBJECT-TYPE
The target IP address of bypass ping health-checking
1.3.6.1.4.1.6296.101.2.14.2.5.6IpAddressread-writecurrent
sleBypassOptionPingControlTransInterval
OBJECT-TYPE
The ping transaction interval
1.3.6.1.4.1.6296.101.2.14.2.5.7Integer32read-writecurrent
sleBypassOptionPingControlTranNumber
OBJECT-TYPE
The ping transaction request number
1.3.6.1.4.1.6296.101.2.14.2.5.8Integer32read-writecurrent
sleBypassOptionPingControlReqInterval
OBJECT-TYPE
The ping request interval
1.3.6.1.4.1.6296.101.2.14.2.5.9Integer32read-writecurrent
sleBypassOptionPingControlReqTimeout
OBJECT-TYPE
The ping request timeout
1.3.6.1.4.1.6296.101.2.14.2.5.10Integer32read-writecurrent
sleBypassOptionPingControlLossThresh
OBJECT-TYPE
The ping loss threshold
1.3.6.1.4.1.6296.101.2.14.2.5.11Integer32read-writecurrent
sleBypassOptionPingNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.14.2.6
sleBypassOptionLinkMonitorTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.14.2.7not-accessiblecurrent
sleBypassOptionLinkMonitorEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.14.2.7.1not-accessiblecurrent
sleBypassOptionLinkMonitorPort
OBJECT-TYPE
The port of bypass link health-checking
1.3.6.1.4.1.6296.101.2.14.2.7.1.1Integer32 (1..65535)read-onlycurrent
sleBypassOptionLinkMonitorPortStatus
OBJECT-TYPE
The port status of bypass link health-checking
1.3.6.1.4.1.6296.101.2.14.2.7.1.2INTEGER {enable(1)}read-onlycurrent
sleBypassOptionLinkMonitorControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.14.2.8
sleBypassOptionLinkMonitorControlRequest
OBJECT-TYPE
The request of a user command.
1.3.6.1.4.1.6296.101.2.14.2.8.1INTEGER {setBypassLinkMonitor(1)}read-writecurrent
sleBypassOptionLinkMonitorControlStatus
OBJECT-TYPE
The status of user command.
1.3.6.1.4.1.6296.101.2.14.2.8.2SleControlStatusTyperead-onlycurrent
sleBypassOptionLinkMonitorControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command.
1.3.6.1.4.1.6296.101.2.14.2.8.3Integer32read-writecurrent
sleBypassOptionLinkMonitorControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command).
1.3.6.1.4.1.6296.101.2.14.2.8.4TimeTicksread-onlycurrent
sleBypassOptionLinkMonitorControlReqResult
OBJECT-TYPE
The result of user command.
1.3.6.1.4.1.6296.101.2.14.2.8.5SleControlRequestResultTyperead-onlycurrent
sleBypassOptionLinkMonitorControlPort
OBJECT-TYPE
The port of bypass link health-checking
1.3.6.1.4.1.6296.101.2.14.2.8.6Integer32read-writecurrent
sleBypassOptionLinkMonitorControlPortStatus
OBJECT-TYPE
The port status of bypass link health-checking
1.3.6.1.4.1.6296.101.2.14.2.8.7INTEGER {enable(1), disable(2)}read-writecurrent
sleBypassOptioLinkMonitorNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.14.2.9
sleHFC
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.15
sleHFCTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.15.1not-accessiblecurrent
sleHFCEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.6296.101.2.15.1.1not-accessiblecurrent
sleHFCOptic1550OTX
OBJECT-TYPE
HFC Optic 1550 OTX value.
1.3.6.1.4.1.6296.101.2.15.1.1.1OCTET STRINGread-onlycurrent
sleHFCOptic1550OTXAlarm
OBJECT-TYPE
HFC Optic 1550 OTX alarm status.
1.3.6.1.4.1.6296.101.2.15.1.1.2INTEGER {off(0), on(1)}read-onlycurrent
sleHFCOpticUpstreamOTX
OBJECT-TYPE
HFC Optic Upstream OTX value.
1.3.6.1.4.1.6296.101.2.15.1.1.3OCTET STRINGread-onlycurrent
sleHFCOpticUpstreamOTXAlarm
OBJECT-TYPE
HFC Optic Upstream OTX alarm status.
1.3.6.1.4.1.6296.101.2.15.1.1.4INTEGER {off(0), on(1)}read-onlycurrent
sleHFCOpticDownstreamORX
OBJECT-TYPE
HFC Optic Downstream ORX value.
1.3.6.1.4.1.6296.101.2.15.1.1.5OCTET STRINGread-onlycurrent
sleHFCOpticDownstreamORXAlarm
OBJECT-TYPE
HFC Optic Downstream ORX alarm status.
1.3.6.1.4.1.6296.101.2.15.1.1.6INTEGER {off(0), on(1)}read-onlycurrent
sleHFCEDFA1OTX
OBJECT-TYPE
HFC EDFA1 OTX value.
1.3.6.1.4.1.6296.101.2.15.1.1.7OCTET STRINGread-onlycurrent
sleHFCEDFA1OTXAlarm
OBJECT-TYPE
HFC EDFA1 OTX alarm status.
1.3.6.1.4.1.6296.101.2.15.1.1.8INTEGER {off(0), on(1)}read-onlycurrent
sleHFCEDFA1ORX
OBJECT-TYPE
HFC EDFA1 ORX value.
1.3.6.1.4.1.6296.101.2.15.1.1.9OCTET STRINGread-onlycurrent
sleHFCEDFA1ORXAlarm
OBJECT-TYPE
HFC EDFA1 ORX alarm status.
1.3.6.1.4.1.6296.101.2.15.1.1.10INTEGER {off(0), on(1)}read-onlycurrent
sleHFCEDFA1LD1Current
OBJECT-TYPE
HFC EDFA1 LD1 Current value.
1.3.6.1.4.1.6296.101.2.15.1.1.11OCTET STRINGread-onlycurrent
sleHFCEDFA1LD1CurrentAlarm
OBJECT-TYPE
HFC EDFA1 LD1 Current alarm status.
1.3.6.1.4.1.6296.101.2.15.1.1.12INTEGER {off(0), on(1)}read-onlycurrent
sleHFCEDFA1LD2Current
OBJECT-TYPE
HFC EDFA1 LD2 Current value.
1.3.6.1.4.1.6296.101.2.15.1.1.13OCTET STRINGread-onlycurrent
sleHFCEDFA1LD2CurrentAlarm
OBJECT-TYPE
HFC EDFA1 LD2 Current alarm status.
1.3.6.1.4.1.6296.101.2.15.1.1.14INTEGER {off(0), on(1)}read-onlycurrent
sleHFCEDFA1LD1Temp
OBJECT-TYPE
HFC EDFA1 LD1 Temp value.
1.3.6.1.4.1.6296.101.2.15.1.1.15OCTET STRINGread-onlycurrent
sleHFCEDFA1LD1TempAlarm
OBJECT-TYPE
HFC EDFA1 LD1 Temp alarm status.
1.3.6.1.4.1.6296.101.2.15.1.1.16INTEGER {off(0), on(1)}read-onlycurrent
sleHFCEDFA1LD2Temp
OBJECT-TYPE
HFC EDFA1 LD2 Temp value.
1.3.6.1.4.1.6296.101.2.15.1.1.17OCTET STRINGread-onlycurrent
sleHFCEDFA1LD2TempAlarm
OBJECT-TYPE
HFC EDFA1 LD2 Temp alarm status.
1.3.6.1.4.1.6296.101.2.15.1.1.18INTEGER {off(0), on(1)}read-onlycurrent
sleHFCEDFA1CaseTemp
OBJECT-TYPE
HFC EDFA1 Case Temp value.
1.3.6.1.4.1.6296.101.2.15.1.1.19OCTET STRINGread-onlycurrent
sleHFCEDFA1CaseTempAlarm
OBJECT-TYPE
HFC EDFA1 Case Temp alarm status.
1.3.6.1.4.1.6296.101.2.15.1.1.20INTEGER {off(0), on(1)}read-onlycurrent
sleHFCEDFA2OTX
OBJECT-TYPE
HFC EDFA2 OTX value.
1.3.6.1.4.1.6296.101.2.15.1.1.21OCTET STRINGread-onlycurrent
sleHFCEDFA2OTXAarm
OBJECT-TYPE
HFC EDFA2 OTX alarm status.
1.3.6.1.4.1.6296.101.2.15.1.1.22INTEGER {off(0), on(1)}read-onlycurrent
sleHFCEDFA2ORX
OBJECT-TYPE
HFC EDFA2 ORX value.
1.3.6.1.4.1.6296.101.2.15.1.1.23OCTET STRINGread-onlycurrent
sleHFCEDFA2ORXAlarm
OBJECT-TYPE
HFC EDFA2 ORX alarm status.
1.3.6.1.4.1.6296.101.2.15.1.1.24INTEGER {off(0), on(1)}read-onlycurrent
sleHFCEDFA2LD1Current
OBJECT-TYPE
HFC EDFA2 LD1 Current value.
1.3.6.1.4.1.6296.101.2.15.1.1.25OCTET STRINGread-onlycurrent
sleHFCEDFA2LD1CurrentAlarm
OBJECT-TYPE
HFC EDFA2 LD1 Current alarm status.
1.3.6.1.4.1.6296.101.2.15.1.1.26INTEGER {off(0), on(1)}read-onlycurrent
sleHFCEDFA2LD2Current
OBJECT-TYPE
HFC EDFA2 LD2 Current value.
1.3.6.1.4.1.6296.101.2.15.1.1.27OCTET STRINGread-onlycurrent
sleHFCEDFA2LD2CurrentAlarm
OBJECT-TYPE
HFC EDFA2 LD2 Current alarm status.
1.3.6.1.4.1.6296.101.2.15.1.1.28INTEGER {off(0), on(1)}read-onlycurrent
sleHFCEDFA2LD1Temp
OBJECT-TYPE
HFC EDFA2 LD1 Temp value.
1.3.6.1.4.1.6296.101.2.15.1.1.29OCTET STRINGread-onlycurrent
sleHFCEDFA2LD1TempAlarm
OBJECT-TYPE
HFC EDFA2 LD1 Temp alarm status.
1.3.6.1.4.1.6296.101.2.15.1.1.30INTEGER {off(0), on(1)}read-onlycurrent
sleHFCEDFA2LD2Temp
OBJECT-TYPE
HFC EDFA2 LD2 Temp value.
1.3.6.1.4.1.6296.101.2.15.1.1.31OCTET STRINGread-onlycurrent
sleHFCEDFA2LD2TempAlarm
OBJECT-TYPE
HFC EDFA2 LD2 Temp alarm status.
1.3.6.1.4.1.6296.101.2.15.1.1.32INTEGER {off(0), on(1)}read-onlycurrent
sleHFCEDFA2CaseTemp
OBJECT-TYPE
HFC EDFA2 Case Temp value.
1.3.6.1.4.1.6296.101.2.15.1.1.33OCTET STRINGread-onlycurrent
sleHFCEDFA2CaseTempAlarm
OBJECT-TYPE
HFC EDFA2 Case Temp alarm status.
1.3.6.1.4.1.6296.101.2.15.1.1.34INTEGER {off(0), on(1)}read-onlycurrent
sleHFCControl
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.15.2
sleHFCControlRequest
OBJECT-TYPE
The request of a user command
1.3.6.1.4.1.6296.101.2.15.2.1INTEGER {setHFCAlarmStatus(1)}read-writecurrent
sleHFCControlStatus
OBJECT-TYPE
The status of user command
1.3.6.1.4.1.6296.101.2.15.2.2SleControlStatusTyperead-onlycurrent
sleHFCControlTimer
OBJECT-TYPE
The maximum time for the manager for a long running user command.
1.3.6.1.4.1.6296.101.2.15.2.3Gauge32read-writecurrent
sleHFCControlTimeStamp
OBJECT-TYPE
The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.101.2.15.2.4TimeTicksread-onlycurrent
sleHFCControlReqResult
OBJECT-TYPE
The result of the last user command
1.3.6.1.4.1.6296.101.2.15.2.5SleControlRequestResultTyperead-onlycurrent
sleHFCControlAlarmIndex
OBJECT-TYPE
The HFC alarm index , edfa1 /edfa2 /optic .
1.3.6.1.4.1.6296.101.2.15.2.6INTEGER {hfcefda1(0), hfcefda2(1), hfcoptic(2)}read-writecurrent
sleHFCControlAlarmStatus
OBJECT-TYPE
The HFC alrm status.
1.3.6.1.4.1.6296.101.2.15.2.7INTEGER {disable(0), enable(1)}read-writecurrent
sleHFCNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6296.101.2.15.3

Notifications

NameOIDStatus
sleDeviceTemperatureThresholdChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.1.3.1current
sleDeviceJumboFrameChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.1.3.2current
sleDeviceLEDTestChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.1.3.3current
sleDeviceEnvironmentMonitoringStatusChanged
NOTIFICATION-TYPE
setEnvironmentMonitoringStatus
1.3.6.1.4.1.6296.101.2.1.3.4current
sleEthernetPortChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.2.3.1current
sleEthernetPortLinkChanged
NOTIFICATION-TYPE
setEthernetPortLinkProfile
1.3.6.1.4.1.6296.101.2.2.3.2current
sleEthernetPortCpuStatisticsLimitChanged
NOTIFICATION-TYPE
setEhternetPortCpuStatisticsLimitProfile
1.3.6.1.4.1.6296.101.2.2.3.3current
sleEthernetPortFloodBlockStateChanged
NOTIFICATION-TYPE
setEthernetPortFloodBlockStateProfile
1.3.6.1.4.1.6296.101.2.2.3.4current
sleEthernetSFPRemoteReset
NOTIFICATION-TYPE
setSFPRemoteReset
1.3.6.1.4.1.6296.101.2.2.7.1current
sleEthernetSFPDdmState
NOTIFICATION-TYPE
setSFPDdmState
1.3.6.1.4.1.6296.101.2.2.7.2current
sleEthernetSFPThresholdSfpChanged
NOTIFICATION-TYPE
setSfpThresholdModule
1.3.6.1.4.1.6296.101.2.2.10.1current
sleEthernetSFPThresholdSystemChanged
NOTIFICATION-TYPE
setSystemThresholdModule
1.3.6.1.4.1.6296.101.2.2.10.2current
sleEthernetSFPThresholdDestroyed
NOTIFICATION-TYPE
delThresholdModule
1.3.6.1.4.1.6296.101.2.2.10.3current
sleFanAdminStateChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.4.3.1current
sleFanSpeedThresholdChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.4.3.2current
sleTemperatureThresholdChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.6.3.1current
sleBatteryForceChargeChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.3.1current
sleBatteryChargingStartChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.3.2current
sleBatteryForceChargeNonStopChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.3.3current
sleBatteryRBUBTStatusChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.3.4current
sleBatteryRBUBTThresholdChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.3.5current
sleBatteryRBURechargeVoltageChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.3.6current
sleBatteryPsuAcTemperThreshChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.3.7current
sleBatteryRBUTemperThreshChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.3.8current
sleBatteryBackupProfileChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.6.1current
sleBatteryBackupUpgraded
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.6.2current
sleBatteryBackupTableCleared
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.7.6.3current
sleSlotSystemRestart
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.1.3.1current
sleSlotSystemCPULoadChagned
NOTIFICATION-TYPE
setSlotCpuloadThreshold
1.3.6.1.4.1.6296.101.2.11.1.3.2current
sleSlotSystemCPULoadDeleted
NOTIFICATION-TYPE
delSlotCpuloadThreshold
1.3.6.1.4.1.6296.101.2.11.1.3.3current
sleSlotStatusLocked
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.2.3.1current
sleSlotStatusUnlocked
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.2.3.2current
sleSlotStatusPlanning
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.2.3.3current
sleSlotStatusNoPlanning
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.2.3.4current
sleSlotStatusUpgradeModeChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.2.3.5current
sleSlotStatusPowerUp
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.2.3.6current
sleSlotStatusPowerDown
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.2.3.7current
sleSlotStatusPowerReset
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.2.3.8current
sleSlotNosUpgrade
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.3.3.1current
sleSlotNosDownload
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.3.3.2current
sleSlotNosBootloaderUpgrade
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.3.3.3current
sleSlotProtectionSystemStatusChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.7.1.3.1current
sleSlotProtectionSystemThreshChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.7.1.3.2current
sleSlotProtectionIUPowerStatusChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.7.1.3.3current
sleSlotProtectionIUTemperThreshChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.7.2.3.1current
sleSlotProtectionIUPowerThreshChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.11.7.2.3.2current
sleRFBaseEthertypeChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.12.3.1current
sleRFBaseEthertypeResetChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.12.3.2current
sleRfPortStatusChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.12.6.1current
sleEMChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.13.3.1current
sleEMDeleted
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.13.3.2current
sleBypassModeChanged
NOTIFICATION-TYPE
setBypassMode(1)
1.3.6.1.4.1.6296.101.2.14.1.3.1current
sleBypassOptionConnectivitySet
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.14.2.3.1current
sleBypassOptionConnectivityUnset
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.14.2.3.2current
sleBypassOptionPingSet
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.14.2.6.1current
sleBypassOptionPingUnset
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.14.2.6.2current
sleBypassOptionLinkMonitorChanged
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.6296.101.2.14.2.9.1current
sleHFCOpticAlarmStatusChanged
NOTIFICATION-TYPE
HFC Alarm Status Changed.
1.3.6.1.4.1.6296.101.2.15.3.1current

Conformance

NameOIDStatus
sleDeviceGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.6296.101.2.16current
sleDeviceNotificationGroup
NOTIFICATION-GROUP
Description.
1.3.6.1.4.1.6296.101.2.17current