SL-XPDR-MIB
- Registered at
- 1.3.6.1.4.1.4515.1.8
- Last updated
- 2005-01-25 00:00
- Organization
- PacketLight Networks Ltd.
- Namespace
- packetlight
- Source file
SL-XPDR-MIB- Digest
sha256:7fc7f5104d69f3e14a286cdedd611aca1988687209071b1e756d8cb9dce6a188
Description
This MIB module describes the optical connections.
Contact
Omri_Viner@PacketLight.com
Imports
| From | Symbols |
|---|---|
| IF-MIB | InterfaceIndex |
| PerfHist-TC-MIB | PerfCurrentCount, PerfIntervalCount, PerfTotalCount |
| SL-NE-MIB | sitelight |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB PerfHist-TC-MIB SL-NE-MIB SL-XPDR-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| TsMaskBits TEXTUAL-CONVENTION 100G Tributary Slots Mask Bits 1..80. | current | |||
| XpdrServiceType TEXTUAL-CONVENTION The service type of the tarsponder. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| slXpdrConn OBJECT-IDENTITY | 1.3.6.1.4.1.4515.1.8.1 | |||
| xpdrConnConfigTable OBJECT-TYPE The connection table contains for each transponding connection a single bi-directional entry. The index to the table is the ifIndex of both XPDR interfaces. The ifType valued used for the index is: 196. | 1.3.6.1.4.1.4515.1.8.1.1 | not-accessible | current | |
| xpdrConnConfigEntry OBJECT-TYPE An entry in the transponding connection table. | 1.3.6.1.4.1.4515.1.8.1.1.1 | not-accessible | current | |
| xpdrConnConfigIf1 OBJECT-TYPE The first XPDR interface. | 1.3.6.1.4.1.4515.1.8.1.1.1.1 | InterfaceIndex | read-only | current |
| xpdrConnConfigIf2 OBJECT-TYPE The second XPDR interface. | 1.3.6.1.4.1.4515.1.8.1.1.1.2 | InterfaceIndex | read-only | current |
| xpdrConnConfigRateControlAdmin OBJECT-TYPE This variable ask the rate of the traffic used by this interface. Frequency is in Kbp/s. The value 0-30 is used for rate control Bypass. | 1.3.6.1.4.1.4515.1.8.1.1.1.3 | INTEGER | read-write | current |
| xpdrConnConfigRateControlOper OBJECT-TYPE This variable tells the rate of the traffic used by this interface. Frequency is in Kbp/s. The value 0 returned for rate control Bypass. | 1.3.6.1.4.1.4515.1.8.1.1.1.4 | INTEGER | read-only | current |
| xpdrConnConfigLosPropagation OBJECT-TYPE This object is used to detrmine if the LOS propagation should be active. | 1.3.6.1.4.1.4515.1.8.1.1.1.5 | TruthValue | read-write | current |
| xpdrServiceType OBJECT-TYPE The service type of the transponder. | 1.3.6.1.4.1.4515.1.8.1.1.1.6 | XpdrServiceType | read-write | current |
| xpdrConnAddMask OBJECT-TYPE This object is a bit mask relevant only for 10G Muxponder entry. It contains a bit for each Muxponder service. To add a service the management should set the corresponding bit to 1. To remove a service the bit should be set to 0. For ODU allocation, the value of xpdrConnAddMask should be set to reflect the odus/time-slots provisioned for the service according to the following rules: a. For ODU1 the first byte is 0; for ODU0 the first byte is 1. b. The second byte. Is equal to: i. The 4 bits of the first nibble correspond to Uplink 1 allocated odus counted from right to left ii. The 4 bits of the second nibble correspond to Uplink 2 allocated odus counted from right to left c. The Third and Forth bytes keep bit-mask of the allocated time-slots within the odu. | 1.3.6.1.4.1.4515.1.8.1.1.1.7 | INTEGER | read-write | current |
| xpdrMuxInbandAdmin OBJECT-TYPE This object is relevant only for muxponder. up value means that the muxponder inband management is enabled. | 1.3.6.1.4.1.4515.1.8.1.1.1.8 | INTEGER {up(1), down(2), standby(3)} | read-write | current |
| xpdrMuxInbandOper OBJECT-TYPE The operational state of the inband interface. | 1.3.6.1.4.1.4515.1.8.1.1.1.9 | INTEGER {up(1), down(2), standby(3)} | read-only | current |
| xpdrDirection OBJECT-TYPE This object is used for unidirectional services. The upper port is the uplink as with the aps configuration. The transponder on one side should be configured as TX and the peer as RX. | 1.3.6.1.4.1.4515.1.8.1.1.1.10 | INTEGER {bidirectional(1), unidirectionalTx(2), unidirectionalRx(3), loopback(4)} | read-write | current |
| xpdrConnConfigCpriRateControl OBJECT-TYPE This object is used to detrmine if the CPRI rate control should be active. | 1.3.6.1.4.1.4515.1.8.1.1.1.11 | TruthValue | read-write | current |
| xpdrFaultPropagationDelay OBJECT-TYPE This object is used to determine the fault propagation delay. The value 0 mean no delay, the value 1 means 100ms delay, the value 2 means 200ms delay etc. 0 is the default value. | 1.3.6.1.4.1.4515.1.8.1.1.1.12 | INTEGER | read-write | current |
| xpdrFecMode OBJECT-TYPE This object is used to determine the IEEE FEC mode for 10G and 16G services: 0 - No FEC (default) 1 - FEC Monitoring 2 - FEC Generation 3 - FEC Regeneration | 1.3.6.1.4.1.4515.1.8.1.1.1.13 | INTEGER | read-write | current |
| xpdrConnAddMask1 OBJECT-TYPE This object is a bit mask relevant only for 100G Muxponder entry. It contains a bit for each tributary slot allocated to the service port from Uplink 1. To incluse a tributary slot the management should set the corresponding bit to 1. To remove a tributary slot service the bit should be set to 0. | 1.3.6.1.4.1.4515.1.8.1.1.1.14 | TsMaskBits | read-write | current |
| xpdrConnAddMask2 OBJECT-TYPE This object is a bit mask relevant only for 100G Muxponder entry. It contains a bit for each tributary slot allocated to the service port from Uplink 2. To incluse a tributary slot the management should set the corresponding bit to 1. To remove a tributary slot service the bit should be set to 0. This entry is relevant only for protected services. | 1.3.6.1.4.1.4515.1.8.1.1.1.15 | TsMaskBits | read-write | current |
| xpdrCryptoUser OBJECT-TYPE The user name of the crypto officer assigned to this service. Default value is Crypto | 1.3.6.1.4.1.4515.1.8.1.1.1.16 | DisplayString | read-write | current |
| oduXcConnConfigTable OBJECT-TYPE Description for 10G: 1. The port numbers are: 0 unassigned 1..10 ODUs of Uplink 1 11..20 ODUs of Uplink 2 (not available without 20G or 1+1 license) 2. All connections are unidirectional 3. P1 is the Source port and P2 is the Sync port 4. Port 0 is used as P2 when P1 is dropped 5. Port 0 is used as P1 when P2 is added 6. In the case of APS the two mate ODUs will apear with oduXcConnConfigProtected=TRUE 7. The allocation of ODUs per service port is described in xpdrConnAddMask above Description for 100G: The ports are the ifIndex of the tributary slots, where the path byte equals to the tributary slot. | 1.3.6.1.4.1.4515.1.8.1.2 | not-accessible | current | |
| oduXcConnConfigEntry OBJECT-TYPE An entry in the ODU connection table. An entry describes uni-directional connection of traffic from P1 (Source port) to port P2 (Sync port). | 1.3.6.1.4.1.4515.1.8.1.2.1 | not-accessible | current | |
| oduXcConnConfigP1 OBJECT-TYPE The Source port. | 1.3.6.1.4.1.4515.1.8.1.2.1.1 | INTEGER | read-create | current |
| oduXcConnConfigP2 OBJECT-TYPE The Sync port. | 1.3.6.1.4.1.4515.1.8.1.2.1.2 | INTEGER | read-create | current |
| oduXcConnConfigProtected OBJECT-TYPE Indication for entry with Protection Mates | 1.3.6.1.4.1.4515.1.8.1.2.1.3 | TruthValue | read-create | current |
| oduXcConnConfigRowStatus OBJECT-TYPE The Status of this connection entry. | 1.3.6.1.4.1.4515.1.8.1.2.1.4 | RowStatus | read-create | current |
| tribXcConnConfigTable OBJECT-TYPE The ports are: For service port - the first tributary (1..80) For Uplink 1 - 100 + first tributary (101..180) For Uplink 2 - 200 + first tributary (201..280) | 1.3.6.1.4.1.4515.1.8.1.3 | not-accessible | current | |
| tribXcConnConfigEntry OBJECT-TYPE An entry in the tributary cross connection table. An entry describes uni-directional connection of traffic from P1 (Source port) to port P2 (Sync port). | 1.3.6.1.4.1.4515.1.8.1.3.1 | not-accessible | current | |
| tribXcConnConfigP1 OBJECT-TYPE The Source port. | 1.3.6.1.4.1.4515.1.8.1.3.1.1 | INTEGER | read-create | current |
| tribXcConnConfigP2 OBJECT-TYPE The Sync port. | 1.3.6.1.4.1.4515.1.8.1.3.1.2 | INTEGER | read-create | current |
| tribXcConnServiceType OBJECT-TYPE The service type of the service. | 1.3.6.1.4.1.4515.1.8.1.3.1.3 | XpdrServiceType | read-write | current |
| tribXcConnMask1 OBJECT-TYPE This object is a bit mask relevant only for 100G Muxponder entry. It contains a bit for each tributary slot allocated to the service port from Uplink 1. To incluse a tributary slot the management should set the corresponding bit to 1. To remove a tributary slot service the bit should be set to 0. | 1.3.6.1.4.1.4515.1.8.1.3.1.4 | TsMaskBits | read-write | current |
| tribXcConnMask2 OBJECT-TYPE This object is a bit mask relevant only for 100G Muxponder entry. It contains a bit for each tributary slot allocated to the service port from Uplink 2. To incluse a tributary slot the management should set the corresponding bit to 1. To remove a tributary slot service the bit should be set to 0. This entry is relevant only for protected services. | 1.3.6.1.4.1.4515.1.8.1.3.1.5 | TsMaskBits | read-write | current |
| tribXcConnConfigProtected OBJECT-TYPE Indication for entry with Protection Mates | 1.3.6.1.4.1.4515.1.8.1.3.1.6 | TruthValue | read-create | current |
| tribXcConnConfigRowStatus OBJECT-TYPE The Status of this connection entry. | 1.3.6.1.4.1.4515.1.8.1.3.1.7 | RowStatus | read-create | current |
| smmOwnerMode OBJECT-TYPE The owner of the SMM tables. | 1.3.6.1.4.1.4515.1.8.1.4 | INTEGER {gui(1), ems(2)} | read-write | current |
| slXpdrLastChange OBJECT-IDENTITY | 1.3.6.1.4.1.4515.1.8.6 | |||
| slXpdrTraps OBJECT-IDENTITY | 1.3.6.1.4.1.4515.1.8.7 | |||
| slXpdrTraps0 OBJECT-IDENTITY | 1.3.6.1.4.1.4515.1.8.7.0 |
Notifications
| Name | OID | Status |
|---|---|---|
| xpdrConnConfigTableChange0 NOTIFICATION-TYPE A xpdrConnConfigTableChange trap is sent when the content of the xpdrConnConfigTable is changed. It is defined to support browsers that don't recognize RFC 2576. | 1.3.6.1.4.1.4515.1.8.7.0.1 | current |
| xpdrConnConfigTableChange NOTIFICATION-TYPE A xpdrConnConfigTableChange trap is sent when the content of the xpdrConnConfigTable is changed. | 1.3.6.1.4.1.4515.1.8.7.1 | current |