SL-ETH-MIB
- Registered at
- 1.3.6.1.4.1.4515.1.1.1
- Last updated
- 2005-08-17 12:00
- Organization
- PacketLight Networks Ltd.
- Namespace
- packetlight
- Source file
SL-ETH-MIB- Digest
sha256:78d97cf9ad41cdf2ead8b34604419f52f469b1e0726e82f7107d64ba0077c4ed
Description
This MIB module describes the Ethernet Service
Contact
Omri_Viner@PacketLight.com
Imports
| From | Symbols |
|---|---|
| IF-MIB | InterfaceIndex |
| PerfHist-TC-MIB | PerfCurrentCount, PerfIntervalCount, PerfTotalCount |
| SL-NE-MIB | slService |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter64, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DateAndTime, DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB PerfHist-TC-MIB SL-ETH-MIB SL-NE-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ethConfigTable OBJECT-TYPE The Ethernet Configuration table. | 1.3.6.1.4.1.4515.1.1.1.1 | not-accessible | current | |
| ethConfigEntry OBJECT-TYPE An entry in the Ethernet Configuration table. | 1.3.6.1.4.1.4515.1.1.1.1.1 | not-accessible | current | |
| ethLineIndex OBJECT-TYPE This object should be made equal to ifIndex. | 1.3.6.1.4.1.4515.1.1.1.1.1.1 | InterfaceIndex | read-only | current |
| ethTimeElapsed OBJECT-TYPE The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value. | 1.3.6.1.4.1.4515.1.1.1.1.1.2 | INTEGER (0..899) | read-only | current |
| ethValidIntervals OBJECT-TYPE The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available. | 1.3.6.1.4.1.4515.1.1.1.1.1.3 | INTEGER (0..96) | read-only | current |
| ethResetPm OBJECT-TYPE Writing to this object cause a Reset to the current PM counters of the corresponding Ethernet interface. | 1.3.6.1.4.1.4515.1.1.1.1.1.4 | INTEGER | read-write | current |
| ethAutoNegSupported OBJECT-TYPE This object indicates the AutoNeg oper status. TRUE - meanse that ethAutoNegAdminStatus is enabled(1) and the Remote interface supports AutoNeg. FALSE - Otherwise. | 1.3.6.1.4.1.4515.1.1.1.1.1.5 | TruthValue | read-only | current |
| ethAutoNegAdminStatus OBJECT-TYPE Setting this object to enabled(1) will cause the interface auto-negotiation function capability to be enabled. | 1.3.6.1.4.1.4515.1.1.1.1.1.6 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| ethConfigStatus OBJECT-TYPE This variable indicates the Line Status of the Ethrenet interface. The ethConfigStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) simultaneously. ethConfigNoAlarm must be set if and only if no other flag is set. The various bit positions are: 1 ethConfigNoAlarm No alarm present 2 ethConfigTransmitFault Optical GbE transceiver transmit fault 4 ethConfigLossOfSignal Optical GbE transceiver signal detect failed 8 ethConfigLinkFail Mac Layer Link failed | 1.3.6.1.4.1.4515.1.1.1.1.1.7 | INTEGER (1..16) | read-only | current |
| ethTransceiverType OBJECT-TYPE The GBIC Type. | 1.3.6.1.4.1.4515.1.1.1.1.1.8 | INTEGER {none(1), base1000SX(2), base1000LX(3)} | read-only | current |
| ethPauseTime OBJECT-TYPE This object indicate how much time the other mac device should pause after it receive a pause frame. The unit are of 512 ns. | 1.3.6.1.4.1.4515.1.1.1.1.1.9 | INTEGER (50..16383) | read-write | current |
| ethPauseEnable OBJECT-TYPE This object indicates whether or not we want to use the flow control mechanism. | 1.3.6.1.4.1.4515.1.1.1.1.1.10 | TruthValue | read-write | current |
| ethResetPmCounters OBJECT-TYPE Setting this object to 1 reset the current interval PM counters of the port. | 1.3.6.1.4.1.4515.1.1.1.1.1.11 | INTEGER | read-write | current |
| ethTransceiverMedia OBJECT-TYPE The thernet port tranceiver media. Used to determine which uplink interface to use. | 1.3.6.1.4.1.4515.1.1.1.1.1.12 | INTEGER {none(1), copper(2), fiber(3)} | read-write | current |
| ethCurrentTable OBJECT-TYPE The Ethernet current table contains various statistics being collected for the current 15 minute interval. | 1.3.6.1.4.1.4515.1.1.1.2 | not-accessible | current | |
| ethCurrentEntry OBJECT-TYPE An entry in the Ethernet Current table. | 1.3.6.1.4.1.4515.1.1.1.2.1 | not-accessible | current | |
| ethCurrentIndex OBJECT-TYPE The index value which uniquely identifies the Ethernet interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a ethLineIndex object instance. | 1.3.6.1.4.1.4515.1.1.1.2.1.1 | InterfaceIndex | read-only | current |
| ethCurrentRxDropEvents OBJECT-TYPE The total number of events in which packets were dropped by the probe due to lack of Ingress resources during this sampling interval. Note that this number is not necessarily the number of packets dropped, it is just the number of times this condition has been detected. | 1.3.6.1.4.1.4515.1.1.1.2.1.2 | Counter64 | read-only | current |
| ethCurrentOctets OBJECT-TYPE The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of 10-Megabit ethernet utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets objects should be sampled before and after a common interval. The differences in the sampled values are Pkts and Octets, respectively, and the number of seconds in the interval is Interval. These values are used to calculate the Utilization as follows: Pkts * (9.6 + 6.4) + (Octets * .8) Utilization = ------------------------------------- Interval * 10,000 The result of this equation is the value Utilization which is the percent utilization of the ethernet segment on a scale of 0 to 100 percent. | 1.3.6.1.4.1.4515.1.1.1.2.1.3 | Counter64 | read-only | current |
| ethCurrentPkts OBJECT-TYPE The number of packets (including bad packets) received during this sampling interval. | 1.3.6.1.4.1.4515.1.1.1.2.1.4 | Counter64 | read-only | current |
| ethCurrentBroadcastPkts OBJECT-TYPE The number of good packets received during this sampling interval that were directed to the broadcast address. | 1.3.6.1.4.1.4515.1.1.1.2.1.5 | Counter64 | read-only | current |
| ethCurrentMulticastPkts OBJECT-TYPE The number of good packets received during this sampling interval that were directed to a multicast address. Note that this number does not include packets addressed to the broadcast address. | 1.3.6.1.4.1.4515.1.1.1.2.1.6 | Counter64 | read-only | current |
| ethCurrentCRCAlignErrors OBJECT-TYPE The number of packets received during this sampling interval that had a length (excluding framing bits but including FCS octets) between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). | 1.3.6.1.4.1.4515.1.1.1.2.1.7 | Counter64 | read-only | current |
| ethCurrentUndersizePkts OBJECT-TYPE The number of packets received during this sampling interval that were less than 64 octets long (excluding framing bits but including FCS octets) and were otherwise well formed. | 1.3.6.1.4.1.4515.1.1.1.2.1.8 | Counter64 | read-only | current |
| ethCurrentOversizePkts OBJECT-TYPE The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed. | 1.3.6.1.4.1.4515.1.1.1.2.1.9 | Counter64 | read-only | current |
| ethCurrentFragments OBJECT-TYPE The total number of packets received during this sampling interval that were less than 64 octets in length (excluding framing bits but including FCS octets) had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment error). | 1.3.6.1.4.1.4515.1.1.1.2.1.10 | Counter64 | read-only | current |
| ethCurrentJabbers OBJECT-TYPE The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). | 1.3.6.1.4.1.4515.1.1.1.2.1.11 | Counter64 | read-only | current |
| ethCurrentCollisions OBJECT-TYPE The best estimate of the total number of collisions on this Ethernet segment during this sampling interval. | 1.3.6.1.4.1.4515.1.1.1.2.1.12 | Counter64 | read-only | current |
| ethCurrentUtilization OBJECT-TYPE The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent (0..10000). | 1.3.6.1.4.1.4515.1.1.1.2.1.13 | Counter64 | read-only | current |
| ethCurrentTxOctets OBJECT-TYPE The total number of octets of data transmited during the current interval. | 1.3.6.1.4.1.4515.1.1.1.2.1.14 | Counter64 | read-only | current |
| ethCurrentTxPkts OBJECT-TYPE The number of packets (including bad packets) received during the current interval. | 1.3.6.1.4.1.4515.1.1.1.2.1.15 | Counter64 | read-only | current |
| ethCurrentRxPause OBJECT-TYPE The number of Pause frames received during the current interval. | 1.3.6.1.4.1.4515.1.1.1.2.1.16 | Counter64 | read-only | current |
| ethCurrentTxPause OBJECT-TYPE The number of Pause farmes transmitted during the current interval. | 1.3.6.1.4.1.4515.1.1.1.2.1.17 | Counter64 | read-only | current |
| ethCurrentTxDropEvents OBJECT-TYPE The total number of events in which packets were dropped by the probe due to lack of Egress resources during this sampling interval. Note that this number is not necessarily the number of packets dropped, it is just the number of times this condition has been detected. | 1.3.6.1.4.1.4515.1.1.1.2.1.18 | Counter64 | read-only | current |
| ethCurrentRxPkts64Octets OBJECT-TYPE The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.4515.1.1.1.2.1.19 | Counter64 | read-only | current |
| ethCurrentRxPkts65to127Octets OBJECT-TYPE The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.4515.1.1.1.2.1.20 | Counter64 | read-only | current |
| ethCurrentRxPkts128to255Octets OBJECT-TYPE The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.4515.1.1.1.2.1.21 | Counter64 | read-only | current |
| ethCurrentRxPkts256to511Octets OBJECT-TYPE The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.4515.1.1.1.2.1.22 | Counter64 | read-only | current |
| ethCurrentRxPkts512to1023Octets OBJECT-TYPE The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.4515.1.1.1.2.1.23 | Counter64 | read-only | current |
| ethCurrentRxPkts1024to1518Octets OBJECT-TYPE The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.4515.1.1.1.2.1.24 | Counter64 | read-only | current |
| ethCurrentRxPkts1519to1522Octets OBJECT-TYPE The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.4515.1.1.1.2.1.25 | Counter64 | read-only | current |
| ethCurrentTxPkts64Octets OBJECT-TYPE The total number of packets transmitted that were 64 octets in length (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.4515.1.1.1.2.1.26 | Counter64 | read-only | current |
| ethCurrentTxPkts65to127Octets OBJECT-TYPE The total number of packets transmitted that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.4515.1.1.1.2.1.27 | Counter64 | read-only | current |
| ethCurrentTxPkts128to255Octets OBJECT-TYPE The total number of packets transmitted that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.4515.1.1.1.2.1.28 | Counter64 | read-only | current |
| ethCurrentTxPkts256to511Octets OBJECT-TYPE The total number of packets transmitted that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.4515.1.1.1.2.1.29 | Counter64 | read-only | current |
| ethCurrentTxPkts512to1023Octets OBJECT-TYPE The total number of packets transmitted that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.4515.1.1.1.2.1.30 | Counter64 | read-only | current |
| ethCurrentTxPkts1024to1518Octets OBJECT-TYPE The total number of packets transmitted that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.4515.1.1.1.2.1.31 | Counter64 | read-only | current |
| ethCurrentTxPkts1519to1522Octets OBJECT-TYPE The total number of packets transmitted that were between 1519 and 1522 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.4515.1.1.1.2.1.32 | Counter64 | read-only | current |
| ethCurrentRxVlanPkts OBJECT-TYPE The total number of VLAN packets received. | 1.3.6.1.4.1.4515.1.1.1.2.1.33 | Counter64 | read-only | current |
| ethCurrentTxVlanPkts OBJECT-TYPE The total number of VLAN packets transmitted. | 1.3.6.1.4.1.4515.1.1.1.2.1.34 | Counter64 | read-only | current |
| ethCurrentRxJumboPkts OBJECT-TYPE The total number of Jumbo packets received. | 1.3.6.1.4.1.4515.1.1.1.2.1.35 | Counter64 | read-only | current |
| ethCurrentTxJumboPkts OBJECT-TYPE The total number of Jumbo packets transmitted. | 1.3.6.1.4.1.4515.1.1.1.2.1.36 | Counter64 | read-only | current |
| ethIntervalTable OBJECT-TYPE The Ethernet Interval Table contains various statistics collected by each Ethernet Interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (identified by ethIntervalNumber) for one specific instance (identified by ethIntervalIndex). | 1.3.6.1.4.1.4515.1.1.1.3 | not-accessible | current | |
| ethIntervalEntry OBJECT-TYPE An entry in the Ethernet Interval table. | 1.3.6.1.4.1.4515.1.1.1.3.1 | not-accessible | current | |
| ethIntervalIndex OBJECT-TYPE The index value which uniquely identifies the Ethernet interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a ethLineIndex object instance. | 1.3.6.1.4.1.4515.1.1.1.3.1.1 | InterfaceIndex | read-only | current |
| ethIntervalNumber OBJECT-TYPE A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1. | 1.3.6.1.4.1.4515.1.1.1.3.1.2 | INTEGER (1..96) | read-only | current |
| ethIntervalDropEvents OBJECT-TYPE The total number of events in which packets were dropped by the probe due to lack of resources during this sampling interval. Note that this number is not necessarily the number of packets dropped, it is just the number of times this condition has been detected. | 1.3.6.1.4.1.4515.1.1.1.3.1.3 | Counter64 | read-only | current |
| ethIntervalOctets OBJECT-TYPE The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets) in the current interval. | 1.3.6.1.4.1.4515.1.1.1.3.1.4 | Counter64 | read-only | current |
| ethIntervalPkts OBJECT-TYPE The number of packets (including bad packets) received during this sampling interval. | 1.3.6.1.4.1.4515.1.1.1.3.1.5 | Counter64 | read-only | current |
| ethIntervalBroadcastPkts OBJECT-TYPE The number of good packets received during this sampling interval that were directed to the broadcast address. | 1.3.6.1.4.1.4515.1.1.1.3.1.6 | Counter64 | read-only | current |
| ethIntervalMulticastPkts OBJECT-TYPE The number of good packets received during this sampling interval that were directed to a multicast address. Note that this number does not include packets addressed to the broadcast address. | 1.3.6.1.4.1.4515.1.1.1.3.1.7 | Counter64 | read-only | current |
| ethIntervalCRCAlignErrors OBJECT-TYPE The number of packets received during this sampling interval that had a length (excluding framing bits but including FCS octets) between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). | 1.3.6.1.4.1.4515.1.1.1.3.1.8 | Counter64 | read-only | current |
| ethIntervalUndersizePkts OBJECT-TYPE The number of packets received during this sampling interval that were less than 64 octets long (excluding framing bits but including FCS octets) and were otherwise well formed. | 1.3.6.1.4.1.4515.1.1.1.3.1.9 | Counter64 | read-only | current |
| ethIntervalOversizePkts OBJECT-TYPE The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed. | 1.3.6.1.4.1.4515.1.1.1.3.1.10 | Counter64 | read-only | current |
| ethIntervalFragments OBJECT-TYPE The total number of packets received during this sampling interval that were less than 64 octets in length (excluding framing bits but including FCS octets) had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment error). | 1.3.6.1.4.1.4515.1.1.1.3.1.11 | Counter64 | read-only | current |
| ethIntervalJabbers OBJECT-TYPE The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). | 1.3.6.1.4.1.4515.1.1.1.3.1.12 | Counter64 | read-only | current |
| ethIntervalCollisions OBJECT-TYPE The best estimate of the total number of collisions on this Ethernet segment during this sampling interval. | 1.3.6.1.4.1.4515.1.1.1.3.1.13 | Counter64 | read-only | current |
| ethIntervalUtilization OBJECT-TYPE The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent (0..10000). | 1.3.6.1.4.1.4515.1.1.1.3.1.14 | Counter64 | read-only | current |
| ethIntervalTxOctets OBJECT-TYPE The total number of octets of data transmited on the network. | 1.3.6.1.4.1.4515.1.1.1.3.1.15 | Counter64 | read-only | current |
| ethIntervalTxPkts OBJECT-TYPE The number of packets (including bad packets) received during this sampling interval. | 1.3.6.1.4.1.4515.1.1.1.3.1.16 | Counter64 | read-only | current |
| ethIntervalRxPause OBJECT-TYPE The number of Pause frames received during this sampling interval. | 1.3.6.1.4.1.4515.1.1.1.3.1.17 | Counter64 | read-only | current |
| ethIntervalTxPause OBJECT-TYPE The number of Pause farmes transmitted during this sampling interval. | 1.3.6.1.4.1.4515.1.1.1.3.1.18 | Counter64 | read-only | current |
| ethIntervalValidData OBJECT-TYPE This variable indicates if the data for this interval is valid. | 1.3.6.1.4.1.4515.1.1.1.3.1.19 | TruthValue | read-only | current |
| ethIntervalTcaFlag OBJECT-TYPE TRUE if one of the counters crossed the threshold during the interval. | 1.3.6.1.4.1.4515.1.1.1.3.1.20 | TruthValue | read-only | current |
| ethTotalTable OBJECT-TYPE The Ethernet Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current day, starting from startOfDay. | 1.3.6.1.4.1.4515.1.1.1.4 | not-accessible | current | |
| ethTotalEntry OBJECT-TYPE An entry in the Ethernet Total table. | 1.3.6.1.4.1.4515.1.1.1.4.1 | not-accessible | current | |
| ethTotalIndex OBJECT-TYPE The index value which uniquely identifies the Ethernet interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a ethLineIndex object instance. | 1.3.6.1.4.1.4515.1.1.1.4.1.1 | InterfaceIndex | read-only | current |
| ethTotalDayNumber OBJECT-TYPE A number which identifies the 1-day interval for which the set of section related statistics is available. The number is between 1 and n, where n is the number of 1-day intervals supported by the agent. The interval identified by 1 is the current 1-day interval, 2 is the previous (most recently completed) 1-day interval and n is the least recently completed 1-day interval. | 1.3.6.1.4.1.4515.1.1.1.4.1.2 | INTEGER (1..33) | not-accessible | current |
| ethTotalDropEvents OBJECT-TYPE The total number of events in which packets were dropped by the probe due to lack of resources in the previous 24 hour interval. Note that this number is not necessarily the number of packets dropped, it is just the number of times this condition has been detected. | 1.3.6.1.4.1.4515.1.1.1.4.1.3 | Counter64 | read-only | current |
| ethTotalOctets OBJECT-TYPE The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets) in the previous 24 hour interval. | 1.3.6.1.4.1.4515.1.1.1.4.1.4 | Counter64 | read-only | current |
| ethTotalPkts OBJECT-TYPE The number of packets (including bad packets) received in the previous 24 hour interval. | 1.3.6.1.4.1.4515.1.1.1.4.1.5 | Counter64 | read-only | current |
| ethTotalBroadcastPkts OBJECT-TYPE The number of good packets received in the previous 24 hour interval that were directed to the broadcast address. | 1.3.6.1.4.1.4515.1.1.1.4.1.6 | Counter64 | read-only | current |
| ethTotalMulticastPkts OBJECT-TYPE The number of good packets received in the previous 24 hour interval that were directed to a multicast address. Note that this number does not include packets addressed to the broadcast address. | 1.3.6.1.4.1.4515.1.1.1.4.1.7 | Counter64 | read-only | current |
| ethTotalCRCAlignErrors OBJECT-TYPE The number of packets received in the previous 24 hour interval that had a length (excluding framing bits but including FCS octets) between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). | 1.3.6.1.4.1.4515.1.1.1.4.1.8 | Counter64 | read-only | current |
| ethTotalUndersizePkts OBJECT-TYPE The number of packets received in the previous 24 hour interval that were less than 64 octets long (excluding framing bits but including FCS octets) and were otherwise well formed. | 1.3.6.1.4.1.4515.1.1.1.4.1.9 | Counter64 | read-only | current |
| ethTotalOversizePkts OBJECT-TYPE The number of packets received in the previous 24 hour interval that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed. | 1.3.6.1.4.1.4515.1.1.1.4.1.10 | Counter64 | read-only | current |
| ethTotalFragments OBJECT-TYPE The total number of packets received in the previous 24 hour interval that were less than 64 octets in length (excluding framing bits but including FCS octets) had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment error). | 1.3.6.1.4.1.4515.1.1.1.4.1.11 | Counter64 | read-only | current |
| ethTotalJabbers OBJECT-TYPE The number of packets received in the previous 24 hour interval that were longer than 1518 octets (excluding framing bits but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). | 1.3.6.1.4.1.4515.1.1.1.4.1.12 | Counter64 | read-only | current |
| ethTotalCollisions OBJECT-TYPE The best estimate of the total number of collisions on this Ethernet segment in the previous 24 hour interval. | 1.3.6.1.4.1.4515.1.1.1.4.1.13 | Counter64 | read-only | current |
| ethTotalUtilization OBJECT-TYPE The avarage of the mean physical layer network utilization on this interface in the previous 24 hour interval. | 1.3.6.1.4.1.4515.1.1.1.4.1.14 | Counter64 | read-only | current |
| ethTotalTxOctets OBJECT-TYPE The total number of octets of data transmited on the network. | 1.3.6.1.4.1.4515.1.1.1.4.1.15 | Counter64 | read-only | current |
| ethTotalTxPkts OBJECT-TYPE The number of packets (including bad packets) received during this sampling interval. | 1.3.6.1.4.1.4515.1.1.1.4.1.16 | Counter64 | read-only | current |
| ethTotalRxPause OBJECT-TYPE The number of Pause frames received during this sampling interval. | 1.3.6.1.4.1.4515.1.1.1.4.1.17 | Counter64 | read-only | current |
| ethTotalTxPause OBJECT-TYPE The number of Pause farmes transmitted during this sampling interval. | 1.3.6.1.4.1.4515.1.1.1.4.1.18 | Counter64 | read-only | current |
| ethTotalValidData OBJECT-TYPE This variable indicates if the data for this day is valid. | 1.3.6.1.4.1.4515.1.1.1.4.1.19 | TruthValue | read-only | current |
| ethTraps OBJECT-IDENTITY | 1.3.6.1.4.1.4515.1.1.1.7 |
Notifications
| Name | OID | Status |
|---|---|---|
| ethStatusChange NOTIFICATION-TYPE A ethStatusChange trap is sent when the value of an instance ethConfigStatus changes. It can be utilized by an NMS to trigger polls. | 1.3.6.1.4.1.4515.1.1.1.7.1 | current |