MIBs Depot

SL-DRY-CON-MIB

Registered at
1.3.6.1.4.1.4515.1.7
Last updated
2001-08-07 00:00
Organization
PacketLight Networks Ltd.
Namespace
packetlight
Source file
SL-DRY-CON-MIB
Digest
sha256:6e3a51f0c65c1763d21a4ecdf39bbc4823f378ba9c06412c1d258815f242a013

Description

This MIB module describes the Dry Contacts.

Contact

Omri_Viner@PacketLight.com

Imports

FromSymbols
IF-MIBInterfaceIndex, ifIndex
PerfHist-TC-MIBPerfCurrentCount, PerfIntervalCount, PerfTotalCount
SL-NE-MIBsitelight
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter64, Gauge32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
PerfHist-TC-MIB
SL-DRY-CON-MIB
SL-NE-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
slDryConOut
OBJECT-IDENTITY
1.3.6.1.4.1.4515.1.7.1
slDryConAlarmCutoff
OBJECT-TYPE
Setting this variable cause to Alarms Cutoff.
1.3.6.1.4.1.4515.1.7.1.1INTEGER {dummy(1)}read-writecurrent
slDryConOutTable
OBJECT-TYPE
The Dry Contact Out table configure the dry contact outputs.
1.3.6.1.4.1.4515.1.7.1.2not-accessiblecurrent
slDryConOutEntry
OBJECT-TYPE
There is an entry for each Output Dry Contact
1.3.6.1.4.1.4515.1.7.1.2.1not-accessiblecurrent
slDryConOutIndex
OBJECT-TYPE
The index of the output dry contact.
1.3.6.1.4.1.4515.1.7.1.2.1.1INTEGER (1..4)read-onlycurrent
slDryConOutCommand
OBJECT-TYPE
Setting this object controls the output dry contact state: activate(1) - activate the output dry contact deactivate(2) - dectivate the output dry contact clear(3) - clears the output dry contact command The object value can also be read by the management. In this case the agent should return the current command to the management. The object value should not be kept in the NVRAM because it is used only for testing. The intial value should be clear(3).
1.3.6.1.4.1.4515.1.7.1.2.1.2INTEGER {activate(1), deactivate(2), clear(3)}read-writecurrent
slDryConOutActiveStatus
OBJECT-TYPE
The current status of the output dry contact: TRUE - means that it is currently active FLASE - means that it is not active
1.3.6.1.4.1.4515.1.7.1.2.1.3TruthValueread-onlycurrent
slDryConIn
OBJECT-IDENTITY
1.3.6.1.4.1.4515.1.7.2
slDryConLastChange
OBJECT-TYPE
The Sys Uptime at the last input change.
1.3.6.1.4.1.4515.1.7.2.1INTEGER {dummy(1)}read-onlycurrent
slDryConInTable
OBJECT-TYPE
The Dry Contact In table describes the dry contacts inputs.
1.3.6.1.4.1.4515.1.7.2.2not-accessiblecurrent
slDryConInEntry
OBJECT-TYPE
There is an entry for each Input Dry Contact
1.3.6.1.4.1.4515.1.7.2.2.1not-accessiblecurrent
slDryConInIndex
OBJECT-TYPE
The index of the input dry contact.
1.3.6.1.4.1.4515.1.7.2.2.1.1INTEGER (1..4)read-onlycurrent
slDryConInDescription
OBJECT-TYPE
A textual description of the input dry contact alarm.
1.3.6.1.4.1.4515.1.7.2.2.1.2DisplayString (SIZE(0..40))read-writecurrent
slDryConInSeverity
OBJECT-TYPE
A severity of the input dry contact alarm.
1.3.6.1.4.1.4515.1.7.2.2.1.3INTEGER {critical(1), major(2), minor(3), cleared(4), notification(5)}read-writecurrent
slDryConInEnable
OBJECT-TYPE
Enable/Disable the input dry contact alarm report generation.
1.3.6.1.4.1.4515.1.7.2.2.1.4INTEGER {enable(1), disable(2)}read-writecurrent
slDryConInPolarity
OBJECT-TYPE
Determines the input dry contact alarm polarity.
1.3.6.1.4.1.4515.1.7.2.2.1.5INTEGER {activeClose(1), activeOpen(2)}read-writecurrent
slDryConInStatus
OBJECT-TYPE
Describe the current input dry contact alarm status.
1.3.6.1.4.1.4515.1.7.2.2.1.6INTEGER {active(1), inactive(2)}read-onlycurrent
slDryConInAlmType
OBJECT-TYPE
Describe the current input dry contact alarm type.
1.3.6.1.4.1.4515.1.7.2.2.1.7INTEGER {aircompr(1), aircond(2), airdryd(3), batdschrg(4), battery(5), clfan(6), cpmajor(7), cpminor(8), engine(9), engoprg(10), explgs(11), firdetr(12), fire(13), flood(14), fuse(15), gen(16), hiair(17), hihum(18), hitemp(19), hiwtr(20), intruder(21), lwbatvg(22), lwfuel(23), lwhum(24), lwpres(25), lwtemp(26), lwwtr(27), misc(28), opendr(29), pump(30), power(31), pwrX(32), rect(33), recthi(34), rectlo(35), smoke(36), toxicgas(37), ventn(38)}read-writecurrent
slDryConTraps
OBJECT-IDENTITY
1.3.6.1.4.1.4515.1.7.3

Notifications

NameOIDStatus
slDryConStatusChangeTrap
NOTIFICATION-TYPE
An slDryConStatusChangeTrap notification is sent when the the Status of an input dry contact is changed and the corresponding alarm is enabled. In order to shoten the Trap, the DisplayString that describes the alarm is not sent. To find out this string the NMS should use the index and get it from the table.
1.3.6.1.4.1.4515.1.7.3.1current