SL-ALS-MIB
- Registered at
- 1.3.6.1.4.1.4515.1.12
- Last updated
- 2000-08-28 00:00
- Organization
- PacketLight Networks Ltd.
- Namespace
- packetlight
- Source file
SL-ALS-MIB- Digest
sha256:3bef2c637a35df7a9af8ce3ea51d42119ea12e1c7c80e653a72332a1de0f0ab0
Description
This MIB module describes the SiteLight ALS feature.
Contact
Omri_Viner@PacketLight.com
Imports
| From | Symbols |
|---|---|
| IF-MIB | InterfaceIndex, ifIndex |
| PerfHist-TC-MIB | PerfCurrentCount, PerfIntervalCount, PerfTotalCount |
| SL-NE-MIB | sitelight |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter64, Gauge32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB PerfHist-TC-MIB SL-ALS-MIB SL-NE-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| slAlsConfig OBJECT-IDENTITY | 1.3.6.1.4.1.4515.1.12.1 | |||
| slAlsConfigTable OBJECT-TYPE The ALS configuration Table. | 1.3.6.1.4.1.4515.1.12.1.1 | not-accessible | current | |
| slAlsConfigEntry OBJECT-TYPE The entries exist for active optical inetfaces ifType = 196. The objects in this table are used to configure the ALS algorithm. | 1.3.6.1.4.1.4515.1.12.1.1.1 | not-accessible | current | |
| slAlsMode OBJECT-TYPE Enable/Disable the ALS algorithm. When the Laser Admin Status is 'down' the ALS not operational. | 1.3.6.1.4.1.4515.1.12.1.1.1.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| slAlsLosDeclareTime OBJECT-TYPE Time to declare optical LOS present or clear: 550 +- 50 msec. | 1.3.6.1.4.1.4515.1.12.1.1.1.2 | INTEGER {ms500(1), ms550(2), ms600(3)} | read-write | current |
| slAlsTestPulseTime OBJECT-TYPE Manual restart for test Pulse time (in manual restart) - 90+-10 sec. | 1.3.6.1.4.1.4515.1.12.1.1.1.3 | INTEGER {s80(1), s90(2), s100(3)} | read-write | current |
| slAlsManualPulseTime OBJECT-TYPE Manual restart Pulse time (in manual mode) - 2+-0.25 sec. | 1.3.6.1.4.1.4515.1.12.1.1.1.4 | INTEGER {ms1750(1), ms2000(2), ms2250(3)} | read-write | current |
| slAlsAutomaticPulseTime OBJECT-TYPE Automatic restart Pulse time (in automatic mode) - 2+-0.25 sec. | 1.3.6.1.4.1.4515.1.12.1.1.1.5 | INTEGER {ms1750(1), ms2000(2), ms2250(3)} | read-write | current |
| slAlsAutomaticDelayTime OBJECT-TYPE In Automatic mode. The delay between two laser re-activations. | 1.3.6.1.4.1.4515.1.12.1.1.1.6 | INTEGER (60..300) | read-write | current |
| slAlsLaserTestActivate OBJECT-TYPE Activate the laser for test operation. | 1.3.6.1.4.1.4515.1.12.1.1.1.7 | INTEGER {activate(1)} | read-write | current |
| slAlsLaserManualActivate OBJECT-TYPE Activate the laser manual operation. | 1.3.6.1.4.1.4515.1.12.1.1.1.8 | INTEGER {activate(1)} | read-write | current |
| slAlsOperStatus OBJECT-TYPE The operational status of the ALS algorithm. When the Laser Admin Status is 'down' the ALS not operational. | 1.3.6.1.4.1.4515.1.12.1.1.1.9 | INTEGER {active(1), inactive(2)} | read-only | current |
| slAlsResetParams OBJECT-TYPE Setting this variable to 1 will reset the ALS parameters to the factory defaults. | 1.3.6.1.4.1.4515.1.12.1.1.1.10 | INTEGER {resetCounters(1)} | read-write | current |
| slAlsTraps OBJECT-IDENTITY | 1.3.6.1.4.1.4515.1.12.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| slAlsStatusChangeTrap NOTIFICATION-TYPE A slAlsStatusChangeTrap is sent when the TX laser status is changed. | 1.3.6.1.4.1.4515.1.12.2.1 | current |