MIBs Depot

SITEBOSS-450-STD-MIB

Registered at
1.3.6.1.4.1.3052.17
Last updated
2013-07-02 04:35
Organization
Asentria Corporation
Revisions
2013-07-02 04:35, 2013-05-28 04:34, 2013-05-10 04:33, 2013-04-10 04:32, 2013-03-15 04:31, 2013-03-14 04:30, 2013-02-06 04:29, 2013-01-14 04:28, 2012-11-19 04:27, 2012-08-22 04:26, 2012-08-02 04:25, 2012-07-09 04:24, 2012-07-06 04:23, 2012-06-12 04:22, 2012-05-02 04:21, 2012-04-02 04:20, 2012-03-15 04:19, 2012-02-28 04:18, 2012-02-21 04:17, 2012-02-20 04:16, 2012-02-14 04:15, 2012-02-03 09:04, 2012-01-16 09:02, 2011-12-16 09:00, 2011-12-06 09:00, 2011-12-05 09:00, 2011-08-08 09:00, 2011-08-01 09:00, 2011-07-08 09:00, 2011-05-18 09:00, 2011-04-15 09:00, 2011-01-05 09:00, 2010-12-02 09:00, 2010-11-03 09:00, 2010-08-24 09:00, 2010-05-17 09:00
Namespace
asentria
Source file
SITEBOSS-450-STD-MIB
Digest
sha256:edeeedc33f84343ff82a339ba22a6a4f123fa966d0e02396122308687091b637

Description

MIB module for managing Asentria SiteBoss 450

Contact

Phone: 206-344-8800 Fax: 206-344-2116 Email: support@asentria.com

Imports

FromSymbols
ASENTRIA-ROOT-MIBasentria
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ASENTRIA-ROOT-MIB
SITEBOSS-450-STD-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
s450notifications
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.0
status
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.1
eventSensorStatus
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.1.1
esPointTable
OBJECT-TYPE
This table organizes 4 basic attributes of points. A point is a particular sensor on an EventSensor (e.g., temperature, humidity, contact closure 2, relay 5, etc.). The 4 point attributes are its name, whether it's in its event state, the point's value as a number and its value as a string. Points are referenced by a point index. The point index is a string of 3 numbers separated by periods. It contains all the information necessary for getting a piece of data off an event sensor; namely, which EventSensor, point class, and which-sensor-of-that-class (a.k.a. point).
1.3.6.1.4.1.3052.17.1.1.1not-accessiblecurrent
esPointEntry
OBJECT-TYPE
Entry for EventSensor point table
1.3.6.1.4.1.3052.17.1.1.1.1not-accessiblecurrent
esIndexES
OBJECT-TYPE
The part of the point index that refers to an EventSensor. The point index is a string of 3 numbers separated by periods. It contains all the information necessary for getting a piece of data off an event sensor; namely, which EventSensor, point class, and which-sensor-of-that-class (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors. The number corresponding to an EventSensor is determined by the user at the initial configuration time. If there is an internal sensor in the unit, it will always be the first item in the Sensor Events setup menu. For example, if a new EventSensor is configured as the 2nd entry AFTER the internal EventSensor (if one exists) in the Sensor Events Setup Menu, then that EventSensor will be known from then on as EventSensor 2. All point indeces with esIndexES=2 will now refer to that particular EventSensor.
1.3.6.1.4.1.3052.17.1.1.1.1.1Integer32 (1..200)read-onlycurrent
esIndexPC
OBJECT-TYPE
The part of the point index that refers to point class. The point index is a string of 3 numbers separated by periods. It contains all the information necessary for getting a piece of data off an event sensor; namely, which EventSensor, point class, and which-sensor-of-that-class (a.k.a. point). The values for this object are: 1=temperature sensor 2=contact closure 3=humidity sensor 4=noise sensor 5=analog input 6=relay
1.3.6.1.4.1.3052.17.1.1.1.1.2Integer32 (1..6)read-onlycurrent
esIndexPoint
OBJECT-TYPE
The part of the point index that delineates which sensor on the EventSensor. So this combined with esIndexPC (Point Class or type) and esIndexES (which EventSensor) uniquely defines each point (sensor or relay) attached to a unit. For example, if esIndexES is 3, esIndexPC is 1 and esIndexPoint is 4 then this is the Fourth Temperature Sensor on EventSensor number 3.
1.3.6.1.4.1.3052.17.1.1.1.1.3Integer32 (1..64)read-onlycurrent
esPointName
OBJECT-TYPE
The name of the point on an EventSensor. For example, 'AC temp' (in the case of the temperature sensor on an EventSensor). There can be multiple points of the same point class on an EventSensor (e.g., 8 contact closures) and multiple sensor classes on an EventSensor (e.g., temperature, contact closure, humidity). If the point referenced by a given point index is solitary (e.g., temperature sensor, because there can be only one on an EventSensor), then this object reads as '<EventSensor name>'. Setting this object for solitary point indices sets the EventSensor name only. On the other hand, if a given point is among other points of the same point class on an EventSensor, then this object reads as '<Sensor name>'. Setting this object for these NON- solitary point indices sets the sensor name only - not the EventSensor name.
1.3.6.1.4.1.3052.17.1.1.1.1.4DisplayStringread-writecurrent
esPointInEventState
OBJECT-TYPE
A number referring to the event state of a point on an EventSensor. This number can have different meanings depending on the point class. If the point class is temperature, humidity, or analog input, then the values of this object are: 1=very low 2=low 3=normal 4=high 5=very high For contact closures the values of this object are: 1=point in event state 2=point in normal state For relays the values of this object are: 1=relay energized (active) 2=relay de-energized (inactive) For any point class and any point, if the event state is undefined, then the value of this object is 0. For any point class except relay, this object is read-only. For relays, setting this object to 1 puts the relay into its active (energized) state. Setting it to 2 puts the relay into its inactive (de-energized) state. Setting it to any value greater than 2 puts the relay into its active state for that many seconds (up to 3600), after which time it puts the relay into its inactive state.
1.3.6.1.4.1.3052.17.1.1.1.1.5Integer32read-writecurrent
esPointValueInt
OBJECT-TYPE
A read-only number referring to the value of a point on an EventSensor. If the point class is temperature, then this object is the temperature in its configured scale (default is Fahrenheit). If the point class is contact closure or relay, then this object is either 0 (open) or 1 (closed). If the point class is humidity, then this object is the percent relative humidity. If the point class is analog input, then this object is the signed input value in tenths of the configured units. If the point class is relay, then this object is either 1 (active a.k.a. energized) or 0 (inactive a.k.a. de-energized). This object cannot be used to control the relay (use esPointInEventState for that).
1.3.6.1.4.1.3052.17.1.1.1.1.6Integer32 (-2147483648..2147483647)read-writecurrent
esPointValueStr
OBJECT-TYPE
A string referring to the value of a point on an EventSensor. For contact closures this object is either 'Open' or 'Closed'. For relays this object is either 'Active' (energized) or 'Inactive' (de-energized). For temperature and humidity point classes, this object is the string representation of the esPointValueInt object. For temperature, 'C' or 'F' is including in the string to indicate scale. For analog inputs, this object is the string representation of the plus/minus input in the configured units appended with the unit name.
1.3.6.1.4.1.3052.17.1.1.1.1.7DisplayStringread-onlycurrent
esPointTimeLastChange
OBJECT-TYPE
The time of the last time an event was triggerred for a point on an EventSensor in MM/DD/YY HH:MM:SS format. For contact closures, the possible events are Active and Inactive. For temperature, humidity, and analog inputs, the possible events are Normal, High, Very High, Low, and Very Low. For relays, this object is a null string.
1.3.6.1.4.1.3052.17.1.1.1.1.8DisplayStringread-onlycurrent
esPointTimetickLastChange
OBJECT-TYPE
The time of the last time an event was triggerred for a point on an EventSensor in 100ths of seconds since reset. For contact closures, the possible events are Active and Inactive. For temperature, humidity, and analog inputs, the possible events are Normal, High, Very High, Low, and Very Low. For relays, this object is 0.
1.3.6.1.4.1.3052.17.1.1.1.1.9TimeTicksread-onlycurrent
esPointAliasValueStr
OBJECT-TYPE
For CC inputs, this is the CC active/inactive alias setting setting value that currently corresponds to the event state. So if the CC input is in the event state, then this object is the active alias setting value. If the CC input is in the normal state, then this object is the inactive alias setting value. For relay/power outputs, this is the output active/inactive alias setting value that currently corresponds to the output state. So if the output is in the active state, then this object is the active alias setting value. If the output is in hte inactive state, then this object is the inactive alias setting value. For non-CC and non-output sensors, this is the same as the esPointValueStr object.
1.3.6.1.4.1.3052.17.1.1.1.1.10DisplayStringread-onlycurrent
dataEventStatus
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.1.2
deStatusTable
OBJECT-TYPE
Data Event Status Table
1.3.6.1.4.1.3052.17.1.2.1not-accessiblecurrent
deStatusEntry
OBJECT-TYPE
EventSensor status entry
1.3.6.1.4.1.3052.17.1.2.1.1not-accessiblecurrent
deStatusIndex
OBJECT-TYPE
Index for Data Events
1.3.6.1.4.1.3052.17.1.2.1.1.1Integer32 (1..100)read-onlycurrent
deStatusName
OBJECT-TYPE
Data Event name
1.3.6.1.4.1.3052.17.1.2.1.1.2DisplayStringread-onlycurrent
deStatusCounter
OBJECT-TYPE
Number of times a data record has matched this event's equation. Range: 1-999999999
1.3.6.1.4.1.3052.17.1.2.1.1.3Integer32read-onlycurrent
deStatusThreshold
OBJECT-TYPE
Number of times the equation is matched before an event is triggered. Range: 1-999999999
1.3.6.1.4.1.3052.17.1.2.1.1.4Integer32read-onlycurrent
fuelSensorStatus
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.1.6
fsStatusTable
OBJECT-TYPE
Fuel sensor status table
1.3.6.1.4.1.3052.17.1.6.1not-accessiblecurrent
fsStatusEntry
OBJECT-TYPE
Fuel sensor status table entry
1.3.6.1.4.1.3052.17.1.6.1.1not-accessiblecurrent
fsStatusIndex
OBJECT-TYPE
Index for fuel sensors
1.3.6.1.4.1.3052.17.1.6.1.1.1Integer32 (1..3)read-onlycurrent
fsStatusName
OBJECT-TYPE
Fuel sensor name
1.3.6.1.4.1.3052.17.1.6.1.1.2DisplayStringread-onlycurrent
fsStatusDeviceState
OBJECT-TYPE
Fuel sensor device state
1.3.6.1.4.1.3052.17.1.6.1.1.3DisplayStringread-onlycurrent
fsStatusVolumeValueString
OBJECT-TYPE
Fuel volume. Range is -2,147,483,648 to 2,147,483,647. This value reads -999 when the fuel sensor is disconnected
1.3.6.1.4.1.3052.17.1.6.1.1.4DisplayStringread-onlycurrent
fsStatusVolumePercentLevel
OBJECT-TYPE
Height of the fluid in the tank expressed as a percentage of the tank height, in hundredths of a percent.
1.3.6.1.4.1.3052.17.1.6.1.1.7DisplayStringread-onlycurrent
fsStatusVolumeInEventState
OBJECT-TYPE
Current event status of the fuel sensor.
1.3.6.1.4.1.3052.17.1.6.1.1.8DisplayStringread-onlycurrent
fsStatusCombined
OBJECT-TYPE
Combined status string intended to be parsed by NMS: deviceState`deviceStateColorCode`percentRounded`valueAsFloat`volumeEventState`volumeEventStateColorCode`capacity`units`name
1.3.6.1.4.1.3052.17.1.6.1.1.9DisplayStringread-onlycurrent
wirelessModemStatus
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.1.7
wmsStatus
OBJECT-TYPE
Wireless modem status
1.3.6.1.4.1.3052.17.1.7.1DisplayStringread-onlycurrent
wmsSignal
OBJECT-TYPE
Wireless modem Signal strength
1.3.6.1.4.1.3052.17.1.7.2DisplayStringread-onlycurrent
wmsRSSI
OBJECT-TYPE
Wireless modem Signal strength (RSSI)
1.3.6.1.4.1.3052.17.1.7.3DisplayStringread-onlycurrent
wmsBER
OBJECT-TYPE
Wireless modem Bit Error Rate
1.3.6.1.4.1.3052.17.1.7.4DisplayStringread-onlycurrent
wmsUpdated
OBJECT-TYPE
Wireless modem info last update time
1.3.6.1.4.1.3052.17.1.7.5DisplayStringread-onlycurrent
wmsRegistration
OBJECT-TYPE
Wireless modem registration status
1.3.6.1.4.1.3052.17.1.7.6DisplayStringread-onlycurrent
wmsLAC
OBJECT-TYPE
Wireless modem Location Area Code
1.3.6.1.4.1.3052.17.1.7.7DisplayStringread-onlycurrent
wmsCellID
OBJECT-TYPE
Wireless modem Cell ID
1.3.6.1.4.1.3052.17.1.7.8DisplayStringread-onlycurrent
wmsIMSI
OBJECT-TYPE
Wireless modem Internation Mobile Subscriber Identity number
1.3.6.1.4.1.3052.17.1.7.9DisplayStringread-onlycurrent
wmsPhnum
OBJECT-TYPE
Wireless modem phone number
1.3.6.1.4.1.3052.17.1.7.10DisplayStringread-onlycurrent
wmsLocalIP
OBJECT-TYPE
Local IP address of modem on wireless network
1.3.6.1.4.1.3052.17.1.7.11DisplayStringread-onlycurrent
wmsMgfID
OBJECT-TYPE
Wireless modem manufacturer ID
1.3.6.1.4.1.3052.17.1.7.12DisplayStringread-onlycurrent
wmsModelID
OBJECT-TYPE
Wireless modem model ID
1.3.6.1.4.1.3052.17.1.7.13DisplayStringread-onlycurrent
wmsIMEI
OBJECT-TYPE
Wireless modem International Mobile Equipment Identity number
1.3.6.1.4.1.3052.17.1.7.14DisplayStringread-onlycurrent
wmsRevID
OBJECT-TYPE
Wireless modem revision ID
1.3.6.1.4.1.3052.17.1.7.15DisplayStringread-onlycurrent
wmsNetName
OBJECT-TYPE
Wireless modem network name
1.3.6.1.4.1.3052.17.1.7.16DisplayStringread-onlycurrent
wmsGPRSStatus
OBJECT-TYPE
Wireless modem (E)GPRS status
1.3.6.1.4.1.3052.17.1.7.17DisplayStringread-onlycurrent
wmsBand
OBJECT-TYPE
Wireless modem band
1.3.6.1.4.1.3052.17.1.7.18DisplayStringread-onlycurrent
wmsChannel
OBJECT-TYPE
Wireless modem channel
1.3.6.1.4.1.3052.17.1.7.19DisplayStringread-onlycurrent
wmsCountryCode
OBJECT-TYPE
Wireless modem country code
1.3.6.1.4.1.3052.17.1.7.20DisplayStringread-onlycurrent
wmsNetCode
OBJECT-TYPE
Wireless modem network code
1.3.6.1.4.1.3052.17.1.7.21DisplayStringread-onlycurrent
wmsPLMNColor
OBJECT-TYPE
Wireless modem PLMN color
1.3.6.1.4.1.3052.17.1.7.22DisplayStringread-onlycurrent
wmsBScolor
OBJECT-TYPE
Wireless modem BS color
1.3.6.1.4.1.3052.17.1.7.23DisplayStringread-onlycurrent
wmsMpRACH
OBJECT-TYPE
Wireless modem max power RACH
1.3.6.1.4.1.3052.17.1.7.24DisplayStringread-onlycurrent
wmsMinRxLevel
OBJECT-TYPE
Wireless modem minimum receive level
1.3.6.1.4.1.3052.17.1.7.25DisplayStringread-onlycurrent
wmsBaseCoeff
OBJECT-TYPE
Wireless modem base coefficient
1.3.6.1.4.1.3052.17.1.7.26DisplayStringread-onlycurrent
wmsSIMStatus
OBJECT-TYPE
WWireless modem SIM status
1.3.6.1.4.1.3052.17.1.7.27DisplayStringread-onlycurrent
wmsICCID
OBJECT-TYPE
Wireless modem SIM ICCID
1.3.6.1.4.1.3052.17.1.7.28DisplayStringread-onlycurrent
wmsModemType
OBJECT-TYPE
Wireless modem type
1.3.6.1.4.1.3052.17.1.7.29DisplayStringread-onlycurrent
acPowerMonitorStatus
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.1.8
acpmStatusTable
OBJECT-TYPE
AC power monitor status table
1.3.6.1.4.1.3052.17.1.8.1not-accessiblecurrent
acpmStatusEntry
OBJECT-TYPE
AC power monitor status table entry
1.3.6.1.4.1.3052.17.1.8.1.1not-accessiblecurrent
acpmsIndex
OBJECT-TYPE
Index for AC power monitors
1.3.6.1.4.1.3052.17.1.8.1.1.1Integer32 (1..6)read-onlycurrent
acpmsName
OBJECT-TYPE
Name for the AC power monitor device.
1.3.6.1.4.1.3052.17.1.8.1.1.2DisplayStringread-onlycurrent
acpmsAvgVoltageValueStr
OBJECT-TYPE
Average voltage, in volts. This is calculated using the formula (register * PT ratio * 0.1). This could be either the average of the phase voltages, or the sum of the phase voltages, depending on device configuration.
1.3.6.1.4.1.3052.17.1.8.1.1.3DisplayStringread-onlycurrent
acpmsAvgVoltageMinStr
OBJECT-TYPE
Minimum average voltage value since last reset, in volts.
1.3.6.1.4.1.3052.17.1.8.1.1.4DisplayStringread-onlycurrent
acpmsAvgVoltageMaxStr
OBJECT-TYPE
Maximum average voltage value since last reset, in volts.
1.3.6.1.4.1.3052.17.1.8.1.1.5DisplayStringread-onlycurrent
acpmsAvgVoltageAvgStr
OBJECT-TYPE
Average average voltage value since last reset, in volts. This is the unit's average of its measurements of the average voltage reported by the AC power monitor device.
1.3.6.1.4.1.3052.17.1.8.1.1.6DisplayStringread-onlycurrent
acpmsAvgVoltageInEventState
OBJECT-TYPE
Event state of this AC power monitor voltage (Low, Normal, High, etc.).
1.3.6.1.4.1.3052.17.1.8.1.1.7DisplayStringread-onlycurrent
acpmsVoltagePhaseAValueStr
OBJECT-TYPE
Phase A voltage, in volts. This is calculated using the formula (register * PT ratio * 0.1).
1.3.6.1.4.1.3052.17.1.8.1.1.8DisplayStringread-onlycurrent
acpmsVoltagePhaseBValueStr
OBJECT-TYPE
Phase B voltage, in volts. This is calculated using the formula (register * PT ratio * 0.1).
1.3.6.1.4.1.3052.17.1.8.1.1.9DisplayStringread-onlycurrent
acpmsVoltagePhaseCValueStr
OBJECT-TYPE
Phase C voltage, in volts. This is calculated using the formula (register * PT ratio * 0.1).
1.3.6.1.4.1.3052.17.1.8.1.1.10DisplayStringread-onlycurrent
acpmsAvgCurrentValueStr
OBJECT-TYPE
Average current, in amps. This is calculated using the formula (register * CT ratio * 0.001). This could be either the average of the phase currents, or the sum of the phase currents, depending on device configuration.
1.3.6.1.4.1.3052.17.1.8.1.1.11DisplayStringread-onlycurrent
acpmsAvgCurrentMinStr
OBJECT-TYPE
Minimum average current value since last reset, in amps.
1.3.6.1.4.1.3052.17.1.8.1.1.12DisplayStringread-onlycurrent
acpmsAvgCurrentMaxStr
OBJECT-TYPE
Maximum average current value since last reset, in amps.
1.3.6.1.4.1.3052.17.1.8.1.1.13DisplayStringread-onlycurrent
acpmsAvgCurrentAvgStr
OBJECT-TYPE
Average average current value since last reset, in amps. This is the unit's average of its measurements of the average current reported by the AC power monitor device.
1.3.6.1.4.1.3052.17.1.8.1.1.14DisplayStringread-onlycurrent
acpmsAvgCurrentInEventState
OBJECT-TYPE
Event state of this AC power monitor current (Low, Normal, High, etc.).
1.3.6.1.4.1.3052.17.1.8.1.1.15DisplayStringread-onlycurrent
acpmsCurrentPhaseAValueStr
OBJECT-TYPE
Phase A current, in amps. This is calculated using the formula (register * CT ratio * 0.001).
1.3.6.1.4.1.3052.17.1.8.1.1.16DisplayStringread-onlycurrent
acpmsCurrentPhaseBValueStr
OBJECT-TYPE
Phase B current, in amps. This is calculated using the formula (register * CT ratio * 0.001).
1.3.6.1.4.1.3052.17.1.8.1.1.17DisplayStringread-onlycurrent
acpmsCurrentPhaseCValueStr
OBJECT-TYPE
Phase C current, in amps. This is calculated using the formula (register * CT ratio * 0.001).
1.3.6.1.4.1.3052.17.1.8.1.1.18DisplayStringread-onlycurrent
acpmsAvgFreqValueStr
OBJECT-TYPE
Frequency, in hertz. On the YD2010, this is calculated using the formula (register * 0.00106813). On the WattsOn, this is calculated using the formula (register * 0.1).
1.3.6.1.4.1.3052.17.1.8.1.1.19DisplayStringread-onlycurrent
acpmsAvgFreqMinStr
OBJECT-TYPE
Minimum frequency value since last reset, in hertz.
1.3.6.1.4.1.3052.17.1.8.1.1.20DisplayStringread-onlycurrent
acpmsAvgFreqMaxStr
OBJECT-TYPE
Maximum frequency value since last reset, in hertz.
1.3.6.1.4.1.3052.17.1.8.1.1.21DisplayStringread-onlycurrent
acpmsAvgFreqAvgStr
OBJECT-TYPE
Average frequency value since last reset, in hertz. This is the unit's average of its measurements of the average frequency reported by the AC power monitor device.
1.3.6.1.4.1.3052.17.1.8.1.1.22DisplayStringread-onlycurrent
acpmsAvgFreqInEventState
OBJECT-TYPE
Event state of this AC power monitor frequency (Low, Normal, High, etc.).
1.3.6.1.4.1.3052.17.1.8.1.1.23DisplayStringread-onlycurrent
acpmsTRPValueStr
OBJECT-TYPE
Total real power, in watts. On the YD2010, this is calculated using the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is the voltage range taken from register 0x30A. On the WattsOn models, this is calculated using the formula (register * PT * CT).
1.3.6.1.4.1.3052.17.1.8.1.1.24DisplayStringread-onlycurrent
acpmsTRPMinStr
OBJECT-TYPE
Minimum total real power value since last reset, in watts.
1.3.6.1.4.1.3052.17.1.8.1.1.25DisplayStringread-onlycurrent
acpmsTRPMaxStr
OBJECT-TYPE
Maximum total real power value since last reset, in watts.
1.3.6.1.4.1.3052.17.1.8.1.1.26DisplayStringread-onlycurrent
acpmsTRPAvgStr
OBJECT-TYPE
Average total real power value since last reset, in watts. This is the unit's average of its measurements of the average total real power reported by the AC power monitor device.
1.3.6.1.4.1.3052.17.1.8.1.1.27DisplayStringread-onlycurrent
acpmsTRPInEventState
OBJECT-TYPE
Event state of this AC power monitor total real power (Low, Normal, High, etc.).
1.3.6.1.4.1.3052.17.1.8.1.1.28DisplayStringread-onlycurrent
acpmsRPPhaseAValueStr
OBJECT-TYPE
Phase A real power, in watts. On the YD2010, this is calculated using the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is the voltage range taken from register 0x30A. On the WattsOn, this is calculated using the formula (register * PT * CT).
1.3.6.1.4.1.3052.17.1.8.1.1.29DisplayStringread-onlycurrent
acpmsRPPhaseBValueStr
OBJECT-TYPE
Phase B real power, in watts. On the YD2010, this is calculated using the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is the voltage range taken from register 0x30A. On the WattsOn, this is calculated using the formula (register * PT * CT).
1.3.6.1.4.1.3052.17.1.8.1.1.30DisplayStringread-onlycurrent
acpmsRPPhaseCValueStr
OBJECT-TYPE
Phase C real power, in watts. On the YD2010, this is calculated using the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is the voltage range taken from register 0x30A. On the WattsOn, this is calculated using the formula (register * PT * CT).
1.3.6.1.4.1.3052.17.1.8.1.1.31DisplayStringread-onlycurrent
acpmsCombined
OBJECT-TYPE
Combined status string intended to be parsed by NMS: name`deviceState`deviceStateColorCode`voltage`current`frequency`power~voltageEventState`voltageColorCode`currentEventState`currentColorCode`frequencyEventState`frequencyColorCode`powerEventState`powerColorCode
1.3.6.1.4.1.3052.17.1.8.1.1.32DisplayStringread-onlycurrent
acpmsTPFValueStr
OBJECT-TYPE
Total power factor.
1.3.6.1.4.1.3052.17.1.8.1.1.33DisplayStringread-onlycurrent
acpmsTPFMinStr
OBJECT-TYPE
Total power factor minimum value since last reset.
1.3.6.1.4.1.3052.17.1.8.1.1.34DisplayStringread-onlycurrent
acpmsTPFMaxStr
OBJECT-TYPE
Total power factor maximum value since last reset.
1.3.6.1.4.1.3052.17.1.8.1.1.35DisplayStringread-onlycurrent
acpmsTPFAvgStr
OBJECT-TYPE
Total power factor average value since last reset.
1.3.6.1.4.1.3052.17.1.8.1.1.36DisplayStringread-onlycurrent
acpmsTPFInEventState
OBJECT-TYPE
Total power factor event state.
1.3.6.1.4.1.3052.17.1.8.1.1.37DisplayStringread-onlycurrent
acpmsPFPhaseAValueStr
OBJECT-TYPE
Phase A power factor.
1.3.6.1.4.1.3052.17.1.8.1.1.38DisplayStringread-onlycurrent
acpmsPFPhaseBValueStr
OBJECT-TYPE
Phase B power factor.
1.3.6.1.4.1.3052.17.1.8.1.1.39DisplayStringread-onlycurrent
acpmsPFPhaseCValueStr
OBJECT-TYPE
Phase C power factor.
1.3.6.1.4.1.3052.17.1.8.1.1.40DisplayStringread-onlycurrent
acpmsTRcPValueStr
OBJECT-TYPE
Total reactive power, in VAR.
1.3.6.1.4.1.3052.17.1.8.1.1.41DisplayStringread-onlycurrent
acpmsTRcPMinStr
OBJECT-TYPE
Total reactive power minimum value since last reset, in VAR.
1.3.6.1.4.1.3052.17.1.8.1.1.42DisplayStringread-onlycurrent
acpmsTRcPMaxStr
OBJECT-TYPE
Total reactive power maximum value since last reset, in VAR.
1.3.6.1.4.1.3052.17.1.8.1.1.43DisplayStringread-onlycurrent
acpmsTRcPAvgStr
OBJECT-TYPE
Total reactive power average value since last reset, in VAR.
1.3.6.1.4.1.3052.17.1.8.1.1.44DisplayStringread-onlycurrent
acpmsRcPPhaseAValueStr
OBJECT-TYPE
Phase A reactive power, in VAR.
1.3.6.1.4.1.3052.17.1.8.1.1.45DisplayStringread-onlycurrent
acpmsRcPPhaseBValueStr
OBJECT-TYPE
Phase B reactive power, in VAR.
1.3.6.1.4.1.3052.17.1.8.1.1.46DisplayStringread-onlycurrent
acpmsRcPPhaseCValueStr
OBJECT-TYPE
Phase C reactive power, in VAR.
1.3.6.1.4.1.3052.17.1.8.1.1.47DisplayStringread-onlycurrent
acpmsTAPValueStr
OBJECT-TYPE
Total apparent power, in VA.
1.3.6.1.4.1.3052.17.1.8.1.1.48DisplayStringread-onlycurrent
acpmsTAPMinStr
OBJECT-TYPE
Total apparent power minimum value since last reset, in VA.
1.3.6.1.4.1.3052.17.1.8.1.1.49DisplayStringread-onlycurrent
acpmsTAPMaxStr
OBJECT-TYPE
Total apparent power maximum value since last reset, in VA.
1.3.6.1.4.1.3052.17.1.8.1.1.50DisplayStringread-onlycurrent
acpmsTAPAvgStr
OBJECT-TYPE
Total apparent power average value since last reset, in VA.
1.3.6.1.4.1.3052.17.1.8.1.1.51DisplayStringread-onlycurrent
acpmsAPPhaseAValueStr
OBJECT-TYPE
Phase A apparent power, in VA.
1.3.6.1.4.1.3052.17.1.8.1.1.52DisplayStringread-onlycurrent
acpmsAPPhaseBValueStr
OBJECT-TYPE
Phase B apparent power, in VA.
1.3.6.1.4.1.3052.17.1.8.1.1.53DisplayStringread-onlycurrent
acpmsAPPhaseCValueStr
OBJECT-TYPE
Phase C apparent power, in VA.
1.3.6.1.4.1.3052.17.1.8.1.1.54DisplayStringread-onlycurrent
acpmsTotalEnergyWh
OBJECT-TYPE
Total energy, in Wh.
1.3.6.1.4.1.3052.17.1.8.1.1.55Integer32read-onlycurrent
acpmsTotalEnergyVAR
OBJECT-TYPE
Total reactive energy, in VAR.
1.3.6.1.4.1.3052.17.1.8.1.1.56Integer32read-onlycurrent
acpmsTotalEnergyVA
OBJECT-TYPE
Total apparent energy, in VA.
1.3.6.1.4.1.3052.17.1.8.1.1.57Integer32read-onlycurrent
batteryMonitorStatus
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.1.10
bmStatusTable
OBJECT-TYPE
Battery monitor status table.
1.3.6.1.4.1.3052.17.1.10.1not-accessiblecurrent
bmStatusEntry
OBJECT-TYPE
Battery monitor status table entry.
1.3.6.1.4.1.3052.17.1.10.1.1not-accessiblecurrent
bmsIndex
OBJECT-TYPE
Index for battery monitors.
1.3.6.1.4.1.3052.17.1.10.1.1.1Integer32 (1..9)read-onlycurrent
bmsEnable
OBJECT-TYPE
ON/OFF enable for this battery monitor.
1.3.6.1.4.1.3052.17.1.10.1.1.2DisplayStringread-onlycurrent
bmsName
OBJECT-TYPE
Name for this battery monitor.
1.3.6.1.4.1.3052.17.1.10.1.1.3DisplayStringread-onlycurrent
bmsState
OBJECT-TYPE
The connected state of the battery monitor. If you unplug the carrier then all three of its battery monitor states will reflect the same state change.
1.3.6.1.4.1.3052.17.1.10.1.1.4DisplayStringread-onlycurrent
bmsStringState
OBJECT-TYPE
State of the string monitored by its battery monitor.
1.3.6.1.4.1.3052.17.1.10.1.1.5DisplayStringread-onlycurrent
bmsTempValue
OBJECT-TYPE
Average jar temperature value in C or F, depending on scale setting. Displayed as a floating point value. -999.0 means this is unknown.
1.3.6.1.4.1.3052.17.1.10.1.1.6DisplayStringread-onlycurrent
bmsTempValueStr
OBJECT-TYPE
Average jar temperature with appropriate scale appended. Displayed as a floating point value. -999.0 means this is unknown.
1.3.6.1.4.1.3052.17.1.10.1.1.7DisplayStringread-onlycurrent
bmsTempEvent
OBJECT-TYPE
Event state of this battery monitor average jar temperature (Low, Normal, High).
1.3.6.1.4.1.3052.17.1.10.1.1.8DisplayStringread-onlycurrent
bmsDiffTempValue
OBJECT-TYPE
Differential temperature in C or F, depending on scale setting. -999 means this is unknown.
1.3.6.1.4.1.3052.17.1.10.1.1.9Integer32read-onlycurrent
bmsDiffTempValueStr
OBJECT-TYPE
Differential temperature with appropriate scale (C or F) appended. -999 means this is unknown.
1.3.6.1.4.1.3052.17.1.10.1.1.10DisplayStringread-onlycurrent
bmsDiffTempEvent
OBJECT-TYPE
Event state of this battery monitor differential temperature (Very High, High, Normal).
1.3.6.1.4.1.3052.17.1.10.1.1.11DisplayStringread-onlycurrent
bmsVoltageValue
OBJECT-TYPE
Total battery voltage on the string, in volts. Displayed as a floating point value in format X.X. -999.0 means this is unknown.
1.3.6.1.4.1.3052.17.1.10.1.1.12DisplayStringread-onlycurrent
bmsVoltageEvent
OBJECT-TYPE
Event state of this battery monitor string voltage (Low, Normal, High, etc.).
1.3.6.1.4.1.3052.17.1.10.1.1.13DisplayStringread-onlycurrent
bmsDiffVoltValue
OBJECT-TYPE
Differential voltage in volts. Displayed as a floating point value in format X.X. -999.0 means this is unknown.
1.3.6.1.4.1.3052.17.1.10.1.1.14DisplayStringread-onlycurrent
bmsDiffVoltEvent
OBJECT-TYPE
Event state of this battery monitor differential voltage (Very High, High, Normal.)
1.3.6.1.4.1.3052.17.1.10.1.1.15DisplayStringread-onlycurrent
bmsCurrentValue
OBJECT-TYPE
Current flow on the string, in amperes. Displayed as a floating point value in format X.X. A positive value means the battery string is charging, and a negative value means the battery string is discharging. -999.0 means this is unknown.
1.3.6.1.4.1.3052.17.1.10.1.1.16DisplayStringread-onlycurrent
bmsChargingCurrentEvent
OBJECT-TYPE
Event state of this battery monitor charging current (Low, Normal, High, etc.).
1.3.6.1.4.1.3052.17.1.10.1.1.17DisplayStringread-onlycurrent
bmsDischargingCurrentEvent
OBJECT-TYPE
Event state of this battery monitor discharging current (Low, Normal, High, etc.).
1.3.6.1.4.1.3052.17.1.10.1.1.18DisplayStringread-onlycurrent
bmsChargeLevelValue
OBJECT-TYPE
Charge level of the battery string.
1.3.6.1.4.1.3052.17.1.10.1.1.19DisplayStringread-onlycurrent
bmsChargeLevelEvent
OBJECT-TYPE
Event state of this battery monitor charge level (Very Low, Low, Normal).
1.3.6.1.4.1.3052.17.1.10.1.1.20DisplayStringread-onlycurrent
bmsJarHealthValue
OBJECT-TYPE
Jar health of the battery string.
1.3.6.1.4.1.3052.17.1.10.1.1.21DisplayStringread-onlycurrent
bmsJarHealthEvent
OBJECT-TYPE
Event state of this battery monitor jar health (Very Low, Low, Normal).
1.3.6.1.4.1.3052.17.1.10.1.1.22DisplayStringread-onlycurrent
bmsCombined
OBJECT-TYPE
Combined status string intended to be parsed by NMS: name`deviceState`deviceStateColorCode`stringState`charge`voltage`temp`health~chargeEventState`chargeColorCode`voltageEventState`voltageColorCode`tempEventState`tempColorCode`healthEventState`healthColorCode`numActiveEvents
1.3.6.1.4.1.3052.17.1.10.1.1.23DisplayStringread-onlycurrent
bmsJarStatusTable
OBJECT-TYPE
This table organizes per-jar attributes of a battery monitor: 1. voltage 2. temperature.
1.3.6.1.4.1.3052.17.1.10.2not-accessiblecurrent
bmJarStatusEntry
OBJECT-TYPE
Entry for battery monitor jar status table. Note this table uses 2 SNMP indexes: the first for which battery monitor and the second for which jar.
1.3.6.1.4.1.3052.17.1.10.2.1not-accessiblecurrent
bmjsIndexBM
OBJECT-TYPE
The part of the index that refers to which battery monitor.
1.3.6.1.4.1.3052.17.1.10.2.1.1Integer32 (1..9)read-onlycurrent
bmjsIndexJar
OBJECT-TYPE
The part of the index that refers to which jar.
1.3.6.1.4.1.3052.17.1.10.2.1.2Integer32 (1..12)read-onlycurrent
bmjsVoltageValue
OBJECT-TYPE
Voltage of individual battery cell. This is a floating point value in format X.X. -999.0 means this is unknown.
1.3.6.1.4.1.3052.17.1.10.2.1.3DisplayStringread-onlycurrent
bmjsTempValue
OBJECT-TYPE
Temperature of individual battery jar. This is a floating point value. -999.0 means unknown.
1.3.6.1.4.1.3052.17.1.10.2.1.4DisplayStringread-onlycurrent
bmjsAdmittanceValue
OBJECT-TYPE
Cell admittance of individual jar. This is an integer value. -999 means unknown.
1.3.6.1.4.1.3052.17.1.10.2.1.5Integer32read-onlycurrent
bmjsAdmittanceChangeValue
OBJECT-TYPE
Percent change of cell admittance of individual jar. This is an integer value.
1.3.6.1.4.1.3052.17.1.10.2.1.6Integer32read-onlycurrent
config
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2
eventSensorBasics
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.1
esNumberEventSensors
OBJECT-TYPE
The number of EventSensors recognized by the unit, including the internal EventSensor. Range: 1-17
1.3.6.1.4.1.3052.17.2.1.1Integer32read-onlycurrent
esTable
OBJECT-TYPE
The table of what EventSensors are attached to the unit, including the internal EventSensor
1.3.6.1.4.1.3052.17.2.1.2not-accessiblecurrent
esEntry
OBJECT-TYPE
Table entry for EventSensor table
1.3.6.1.4.1.3052.17.2.1.2.1not-accessiblecurrent
esIndex
OBJECT-TYPE
This number refers to an EventSensor; it has the same meaning as the esIndexES object (see above), except that this object is used only within the esTable branch. This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors. The number corresponding to an EventSensor is determined by the user at the initial configuration time. If there is an internal sensor in the unit, it will always be the first item in the Sensor Events setup menu. For example, if a new EventSensor is configured as the 2nd entry AFTER the internal EventSensor (if one exists) in the Sensor Events Setup Menu, then that EventSensor will be known from then on as EventSensor 2. All point indeces with esIndex=2 will now refer to that particular EventSensor.
1.3.6.1.4.1.3052.17.2.1.2.1.1Integer32 (1..200)read-onlycurrent
esName
OBJECT-TYPE
The name of the EventSensor
1.3.6.1.4.1.3052.17.2.1.2.1.2DisplayStringread-onlycurrent
esID
OBJECT-TYPE
The factory-assigned ID of the EventSensor
1.3.6.1.4.1.3052.17.2.1.2.1.3DisplayStringread-onlycurrent
esNumberTempSensors
OBJECT-TYPE
The number of temperature sensors on the EventSensor
1.3.6.1.4.1.3052.17.2.1.2.1.4Integer32read-onlycurrent
esTempReportingMode
OBJECT-TYPE
Description of how temperature values should be interpreted.
1.3.6.1.4.1.3052.17.2.1.2.1.5DisplayStringread-onlycurrent
esNumberCCs
OBJECT-TYPE
The number of contact closures on the EventSensor.
1.3.6.1.4.1.3052.17.2.1.2.1.6Integer32read-onlycurrent
esCCReportingMode
OBJECT-TYPE
Description of how CC values should be interpreted.
1.3.6.1.4.1.3052.17.2.1.2.1.7DisplayStringread-onlycurrent
esNumberHumidSensors
OBJECT-TYPE
The number of humidity sensors on the EventSensor.
1.3.6.1.4.1.3052.17.2.1.2.1.8Integer32read-onlycurrent
esHumidReportingMode
OBJECT-TYPE
Description of how humidity sensor values should be interpreted.
1.3.6.1.4.1.3052.17.2.1.2.1.9DisplayStringread-onlycurrent
esNumberNoiseSensors
OBJECT-TYPE
The number of noise sensors on the EventSensor.
1.3.6.1.4.1.3052.17.2.1.2.1.10Integer32read-onlycurrent
esNoiseReportingMode
OBJECT-TYPE
Description of how noise sensor values should be interpreted.
1.3.6.1.4.1.3052.17.2.1.2.1.11DisplayStringread-onlycurrent
esNumberAirflowSensors
OBJECT-TYPE
The number of airflow sensors on the EventSensor.
1.3.6.1.4.1.3052.17.2.1.2.1.12Integer32read-onlycurrent
esAirflowReportingMode
OBJECT-TYPE
Description of how airflow sensor values should be interpreted.
1.3.6.1.4.1.3052.17.2.1.2.1.13DisplayStringread-onlycurrent
esNumberAnalog
OBJECT-TYPE
The number of analog inputs on the EventSensor.
1.3.6.1.4.1.3052.17.2.1.2.1.14Integer32read-onlycurrent
esAnalogReportingMode
OBJECT-TYPE
Description of how analog input values should be interpreted.
1.3.6.1.4.1.3052.17.2.1.2.1.15DisplayStringread-onlycurrent
esNumberRelayOutputs
OBJECT-TYPE
The number of relay outputs on the EventSensor
1.3.6.1.4.1.3052.17.2.1.2.1.16Integer32read-onlycurrent
esRelayReportingMode
OBJECT-TYPE
Description of how relay output values should be interpreted.
1.3.6.1.4.1.3052.17.2.1.2.1.17DisplayStringread-onlycurrent
esTempCombinedStatus
OBJECT-TYPE
Combined status string intended to be parsed by NMS: name`value`scale`eventState`eventColorCode
1.3.6.1.4.1.3052.17.2.1.2.1.18DisplayStringread-onlycurrent
esCCCombinedStatusBlock1
OBJECT-TYPE
Combined status string intended to be parsed by NMS: numInBlock~name1`value1`eventColorCode1`alias1~name2`value2`eventColorCode2`alias2~...name8`value8`eventColorCode8`alias8
1.3.6.1.4.1.3052.17.2.1.2.1.19DisplayStringread-onlycurrent
esCCCombinedStatusBlock2
OBJECT-TYPE
Combined status string intended to be parsed by NMS: numInBlock~name9`value9`eventColorCode9`alias9~name10`value10`eventColorCode10`alias10~...name16`value16`eventColorCode16`alias16
1.3.6.1.4.1.3052.17.2.1.2.1.20DisplayStringread-onlycurrent
esCCCombinedStatusBlock3
OBJECT-TYPE
Combined status string intended to be parsed by NMS: numInBlock~name17`value17`eventColorCode17`alias17~name18`value18`eventColorCode18`alias18~...name24`value24`eventColorCode24`alias24
1.3.6.1.4.1.3052.17.2.1.2.1.21DisplayStringread-onlycurrent
esCCCombinedStatusBlock4
OBJECT-TYPE
Combined status string intended to be parsed by NMS: numInBlock~name25`value25`eventColorCode25`alias25~name26`value26`eventColorCode26`alias26~...name32`value32`eventColorCode32`alias32
1.3.6.1.4.1.3052.17.2.1.2.1.22DisplayStringread-onlycurrent
esCCCombinedStatusBlock5
OBJECT-TYPE
Combined status string intended to be parsed by NMS: numInBlock~name33`value33`eventColorCode33`alias33~name34`value34`eventColorCode34`alias35~...name40`value40`eventColorCode40`alias40
1.3.6.1.4.1.3052.17.2.1.2.1.23DisplayStringread-onlycurrent
esCCCombinedStatusBlock6
OBJECT-TYPE
Combined status string intended to be parsed by NMS: numInBlock~name41`value41`eventColorCode41`alias41~name42`value42`eventColorCode42`alias43~...name48`value48`eventColorCode48`alias48
1.3.6.1.4.1.3052.17.2.1.2.1.24DisplayStringread-onlycurrent
esCCCombinedStatusBlock7
OBJECT-TYPE
Combined status string intended to be parsed by NMS: numInBlock~name49`value49`eventColorCode49`alias49~name50`value50`eventColorCode50`alias50~...name56`value56`eventColorCode56`alias56
1.3.6.1.4.1.3052.17.2.1.2.1.25DisplayStringread-onlycurrent
esCCCombinedStatusBlock8
OBJECT-TYPE
Combined status string intended to be parsed by NMS: numInBlock~name57`value57`eventColorCode57`alias57~name57`value57`eventColorCode564`alias57~...name64`value64`eventColorCode64`alias64
1.3.6.1.4.1.3052.17.2.1.2.1.26DisplayStringread-onlycurrent
esHumidCombinedStatus
OBJECT-TYPE
Combined status string intended to be parsed by NMS: name`value`eventState`eventColorCode
1.3.6.1.4.1.3052.17.2.1.2.1.27DisplayStringread-onlycurrent
esAnalogCombinedStatusBlock1
OBJECT-TYPE
Combined status string intended to be parsed by NMS: numInBlock~name1`value1`units1`eventState`eventColorCode1~name2`value2`units2`eventState`eventColorCode2~...
1.3.6.1.4.1.3052.17.2.1.2.1.28DisplayStringread-onlycurrent
esAnalogCombinedStatusBlock2
OBJECT-TYPE
Combined status string intended to be parsed by NMS: numInBlock~name9`value9`units9`eventState9`eventColorCode9~...
1.3.6.1.4.1.3052.17.2.1.2.1.29DisplayStringread-onlycurrent
esAnalogCombinedStatusBlock3
OBJECT-TYPE
Combined status string intended to be parsed by NMS: numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~...
1.3.6.1.4.1.3052.17.2.1.2.1.30DisplayStringread-onlycurrent
esAnalogCombinedStatusBlock4
OBJECT-TYPE
Combined status string intended to be parsed by NMS: numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~...
1.3.6.1.4.1.3052.17.2.1.2.1.31DisplayStringread-onlycurrent
esAnalogCombinedStatusBlock5
OBJECT-TYPE
Combined status string intended to be parsed by NMS: numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~...
1.3.6.1.4.1.3052.17.2.1.2.1.32DisplayStringread-onlycurrent
esAnalogCombinedStatusBlock6
OBJECT-TYPE
Combined status string intended to be parsed by NMS: numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~...
1.3.6.1.4.1.3052.17.2.1.2.1.33DisplayStringread-onlycurrent
esOutputCombinedStatusBlock1
OBJECT-TYPE
Combined status string intended to be parsed by NMS: numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~...
1.3.6.1.4.1.3052.17.2.1.2.1.34DisplayStringread-onlycurrent
esOutputCombinedStatusBlock2
OBJECT-TYPE
Combined status string intended to be parsed by NMS: numInBlock`namex`valuex`aliasx~namey`valuey`aliasy~...namez`valuez`aliasz
1.3.6.1.4.1.3052.17.2.1.2.1.35DisplayStringread-onlycurrent
esNewSensors
OBJECT-TYPE
String representing the number of new (attached but unconfigured) EventSensors
1.3.6.1.4.1.3052.17.2.1.3DisplayStringread-onlycurrent
eventSensorPointConfig
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.2
esPointConfigTempTable
OBJECT-TYPE
This table organizes 3 basic attributes of temperature sensor points. A point is a particular sensor on an EventSensor. The 3 point attributes organizes in this table are: 1. the configuration item (e.g., enable, name, etc.) 2. the eventsensor on which this point resides 3. the point number (always 1 for temp sensors) Points are referenced by a point config index. The point config index is a string of 2 numbers separated by periods. It contains all the information necessary for getting a piece of data off an event sensor within the context of this emperature point config table ; namely, which EventSensor, and which sensor (a.k.a. point) (always 1 for temperature sensors).
1.3.6.1.4.1.3052.17.2.2.1not-accessiblecurrent
esPointConfigTempEntry
OBJECT-TYPE
Entry for EventSensor point config temperature table
1.3.6.1.4.1.3052.17.2.2.1.1not-accessiblecurrent
espcTempIndexES
OBJECT-TYPE
The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the the context of the eventsensor point config temperature table; namely, which EventSensor, and which sensor (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors. The number corresponding to an EventSensor is determined by the user at the initial configuration time. If there is an internal sensor in the unit, it will always be the first item in the Sensor Events setup menu. For example, if a new EventSensor is configured as the 2nd entry AFTER the internal EventSensor (if one exists) in the Sensor Events Setup Menu, then that EventSensor will be known from then on as EventSensor 2. All point indeces with esIndexES=2 will now refer to that particular EventSensor.
1.3.6.1.4.1.3052.17.2.2.1.1.1Integer32 (1..200)read-onlycurrent
espcTempIndexPoint
OBJECT-TYPE
The part of the point index that delineates which sensor on the EventSensor. So this combined with espcTempIndexES (which EventSensor) uniquely defines each point attached to a unit within the context of temperature point configuration.
1.3.6.1.4.1.3052.17.2.2.1.1.2Integer32 (1..64)read-onlycurrent
espcTempEnable
OBJECT-TYPE
ON/OFF enable this temperature sensor
1.3.6.1.4.1.3052.17.2.2.1.1.3DisplayStringread-writecurrent
espcTempScale
OBJECT-TYPE
Scale (C/F) for this temperature sensor
1.3.6.1.4.1.3052.17.2.2.1.1.4DisplayStringread-writecurrent
espcTempDeadband
OBJECT-TYPE
Deadband for this temperature sensor (in floating-point format)
1.3.6.1.4.1.3052.17.2.2.1.1.5DisplayStringread-writecurrent
espcTempVHighTemp
OBJECT-TYPE
Very high temperature event threshold for this temperature sensor (in floating-point format)
1.3.6.1.4.1.3052.17.2.2.1.1.6DisplayStringread-writecurrent
espcTempVHighActions
OBJECT-TYPE
Very high temperature event actions for this temperature sensor
1.3.6.1.4.1.3052.17.2.2.1.1.7DisplayStringread-writecurrent
espcTempVHighTrapnum
OBJECT-TYPE
Very high temperature event trap number for this temperature sensor
1.3.6.1.4.1.3052.17.2.2.1.1.8Integer32read-writecurrent
espcTempVHighClass
OBJECT-TYPE
Very high temperature event class for this temperature sensor
1.3.6.1.4.1.3052.17.2.2.1.1.9DisplayStringread-writecurrent
espcTempHighTemp
OBJECT-TYPE
High temperature event threshold for this temperature sensor (in floating-point format)
1.3.6.1.4.1.3052.17.2.2.1.1.10DisplayStringread-writecurrent
espcTempHighActions
OBJECT-TYPE
High temperature event actions for this temperature sensor
1.3.6.1.4.1.3052.17.2.2.1.1.11DisplayStringread-writecurrent
espcTempHighTrapnum
OBJECT-TYPE
High temperature event trap number for this temperature sensor
1.3.6.1.4.1.3052.17.2.2.1.1.12Integer32read-writecurrent
espcTempHighClass
OBJECT-TYPE
High temperature event class for this temperature sensor
1.3.6.1.4.1.3052.17.2.2.1.1.13DisplayStringread-writecurrent
espcTempNormalActions
OBJECT-TYPE
Return-to-normal event actions for this temperature sensor
1.3.6.1.4.1.3052.17.2.2.1.1.14DisplayStringread-writecurrent
espcTempNormalTrapnum
OBJECT-TYPE
Return-to-normal event trap number for this temperature sensor
1.3.6.1.4.1.3052.17.2.2.1.1.15Integer32read-writecurrent
espcTempNormalClass
OBJECT-TYPE
Return-to-normal event class for this temperature sensor
1.3.6.1.4.1.3052.17.2.2.1.1.16DisplayStringread-writecurrent
espcTempLowTemp
OBJECT-TYPE
Low temperature event threshold for this temperature sensor (in floating-point format)
1.3.6.1.4.1.3052.17.2.2.1.1.17DisplayStringread-writecurrent
espcTempLowActions
OBJECT-TYPE
Low temperature event actions for this temperature sensor
1.3.6.1.4.1.3052.17.2.2.1.1.18DisplayStringread-writecurrent
espcTempLowTrapnum
OBJECT-TYPE
Low temperature event trap number for this temperature sensor
1.3.6.1.4.1.3052.17.2.2.1.1.19Integer32read-writecurrent
espcTempLowClass
OBJECT-TYPE
Low temperature event class for this temperature sensor
1.3.6.1.4.1.3052.17.2.2.1.1.20DisplayStringread-writecurrent
espcTempVLowTemp
OBJECT-TYPE
Very Low temperature event threshold for this temperature sensor (in floating-point format)
1.3.6.1.4.1.3052.17.2.2.1.1.21DisplayStringread-writecurrent
espcTempVLowActions
OBJECT-TYPE
Very Low temperature event actions for this temperature sensor
1.3.6.1.4.1.3052.17.2.2.1.1.22DisplayStringread-writecurrent
espcTempVLowTrapnum
OBJECT-TYPE
Very Low temperature event trap number for this temperature sensor
1.3.6.1.4.1.3052.17.2.2.1.1.23Integer32read-writecurrent
espcTempVLowClass
OBJECT-TYPE
Very Low temperature event class for this temperature sensor
1.3.6.1.4.1.3052.17.2.2.1.1.24DisplayStringread-writecurrent
esPointConfigCCTable
OBJECT-TYPE
This table organizes 3 basic attributes of contact closure points. A point is a particular sensor on an EventSensor. The 3 point attributes organizes in this table are: 1. the configuration item (e.g., enable, name, etc.) 2. the eventsensor on which this point resides 3. the point number Points are referenced by a point config index. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the context of this contact closure point config table ; namely, which EventSensor and which sensor.
1.3.6.1.4.1.3052.17.2.2.2not-accessiblecurrent
esPointConfigCCEntry
OBJECT-TYPE
Entry for EventSensor point config contact closure table
1.3.6.1.4.1.3052.17.2.2.2.1not-accessiblecurrent
espcCCIndexES
OBJECT-TYPE
The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the the context of the eventsensor point config contact closure table; namely, which EventSensor and which sensor (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors.
1.3.6.1.4.1.3052.17.2.2.2.1.1Integer32 (1..200)read-onlycurrent
espcCCIndexPoint
OBJECT-TYPE
The part of the point index that delineates which sensor on the EventSensor. So this combined with espcCCIndexES (which EventSensor) uniquely defines each point attached to a unit within the context of contact closure point configuration.
1.3.6.1.4.1.3052.17.2.2.2.1.2Integer32 (1..64)read-onlycurrent
espcCCEnable
OBJECT-TYPE
ON/OFF enable for this contact closure
1.3.6.1.4.1.3052.17.2.2.2.1.3DisplayStringread-writecurrent
espcCCName
OBJECT-TYPE
Name for this contact closure
1.3.6.1.4.1.3052.17.2.2.2.1.4DisplayStringread-writecurrent
espcCCEventState
OBJECT-TYPE
Event state for this contact closure
1.3.6.1.4.1.3052.17.2.2.2.1.5DisplayStringread-writecurrent
espcCCThreshold
OBJECT-TYPE
Event threshold (seconds) for this contact closure
1.3.6.1.4.1.3052.17.2.2.2.1.6Integer32 (0..65535)read-writecurrent
espcCCEventActions
OBJECT-TYPE
Event actions for this contact closure
1.3.6.1.4.1.3052.17.2.2.2.1.7DisplayStringread-writecurrent
espcCCEventTrapnum
OBJECT-TYPE
Event trap number for this contact closure
1.3.6.1.4.1.3052.17.2.2.2.1.8Integer32read-writecurrent
espcCCEventClass
OBJECT-TYPE
Event class for this contact closure
1.3.6.1.4.1.3052.17.2.2.2.1.9DisplayStringread-writecurrent
espcCCNormalActions
OBJECT-TYPE
Return-to-normal actions for this contact closure
1.3.6.1.4.1.3052.17.2.2.2.1.10DisplayStringread-writecurrent
espcCCNormalTrapnum
OBJECT-TYPE
Return-to-normal trap number for this contact closure
1.3.6.1.4.1.3052.17.2.2.2.1.11Integer32read-writecurrent
espcCCNormalClass
OBJECT-TYPE
Return-to-normal class for this contact closure
1.3.6.1.4.1.3052.17.2.2.2.1.12DisplayStringread-writecurrent
espcCCAlarmAlias
OBJECT-TYPE
Event alias for this contact closure
1.3.6.1.4.1.3052.17.2.2.2.1.13DisplayStringread-writecurrent
espcCCNormalAlias
OBJECT-TYPE
Return-to-normal alias for this contact closure
1.3.6.1.4.1.3052.17.2.2.2.1.14DisplayStringread-writecurrent
espcCCNormalThreshold
OBJECT-TYPE
Event threshold (seconds) for this contact closure to return to normal
1.3.6.1.4.1.3052.17.2.2.2.1.15Integer32 (0..65535)read-writecurrent
esPointConfigHumidTable
OBJECT-TYPE
This table organizes 3 basic attributes of humidity points. A point is a particular sensor on an EventSensor. The 3 point attributes organizes in this table are: 1. the configuration item (e.g., enable, name, etc.) 2. the eventsensor on which this point resides 3. the point number (always 1 for humidity sensors) Points are referenced by a point config index. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the context of this humidity point config table ; namely, which EventSensor and which sensor.
1.3.6.1.4.1.3052.17.2.2.3not-accessiblecurrent
esPointConfigHumidEntry
OBJECT-TYPE
Entry for EventSensor point config humidity table
1.3.6.1.4.1.3052.17.2.2.3.1not-accessiblecurrent
espcHumidIndexES
OBJECT-TYPE
The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the the context of the eventsensor point config contact closure table; namely, which EventSensor and which sensor (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors.
1.3.6.1.4.1.3052.17.2.2.3.1.1Integer32 (1..200)read-onlycurrent
espcHumidIndexPoint
OBJECT-TYPE
The part of the point index that delineates which sensor on the EventSensor. So this combined with espcHumidIndexES (which EventSensor) uniquely defines each point attached to a unit within the context of contact closure point configuration.
1.3.6.1.4.1.3052.17.2.2.3.1.2Integer32 (1..64)read-onlycurrent
espcHumidEnable
OBJECT-TYPE
ON/OFF enable for this humidity sensor
1.3.6.1.4.1.3052.17.2.2.3.1.3DisplayStringread-writecurrent
espcHumidDeadband
OBJECT-TYPE
Deadband for this humidity sensor
1.3.6.1.4.1.3052.17.2.2.3.1.4Integer32read-writecurrent
espcHumidVHighHumid
OBJECT-TYPE
Very high event threshold for this humidity sensor
1.3.6.1.4.1.3052.17.2.2.3.1.5Integer32read-writecurrent
espcHumidVHighActions
OBJECT-TYPE
Very high event actions for this humidity sensor
1.3.6.1.4.1.3052.17.2.2.3.1.6DisplayStringread-writecurrent
espcHumidVHighTrapnum
OBJECT-TYPE
Very high event trap number for this humidity sensor
1.3.6.1.4.1.3052.17.2.2.3.1.7Integer32read-writecurrent
espcHumidVHighClass
OBJECT-TYPE
Very high event class for this humidity sensor
1.3.6.1.4.1.3052.17.2.2.3.1.8DisplayStringread-writecurrent
espcHumidHighHumid
OBJECT-TYPE
High event threshold for this humidity sensor
1.3.6.1.4.1.3052.17.2.2.3.1.9Integer32read-writecurrent
espcHumidHighActions
OBJECT-TYPE
High event actions for this humidity sensor
1.3.6.1.4.1.3052.17.2.2.3.1.10DisplayStringread-writecurrent
espcHumidHighTrapnum
OBJECT-TYPE
High event trap number for this humidity sensor
1.3.6.1.4.1.3052.17.2.2.3.1.11Integer32read-writecurrent
espcHumidHighClass
OBJECT-TYPE
High event class for this humidity sensor
1.3.6.1.4.1.3052.17.2.2.3.1.12DisplayStringread-writecurrent
espcHumidNormalActions
OBJECT-TYPE
Return-to-normal actions for this humidity sensor
1.3.6.1.4.1.3052.17.2.2.3.1.13DisplayStringread-writecurrent
espcHumidNormalTrapnum
OBJECT-TYPE
Return-to-normal trap number for this humidity sensor
1.3.6.1.4.1.3052.17.2.2.3.1.14Integer32read-writecurrent
espcHumidNormalClass
OBJECT-TYPE
Return-to-normal class for this humidity sensor
1.3.6.1.4.1.3052.17.2.2.3.1.15DisplayStringread-writecurrent
espcHumidLowHumid
OBJECT-TYPE
Low event threshold for this humidity sensor
1.3.6.1.4.1.3052.17.2.2.3.1.16Integer32read-writecurrent
espcHumidLowActions
OBJECT-TYPE
Low event actions for this humidity sensor
1.3.6.1.4.1.3052.17.2.2.3.1.17DisplayStringread-writecurrent
espcHumidLowTrapnum
OBJECT-TYPE
Low event trap number for this humidity sensor
1.3.6.1.4.1.3052.17.2.2.3.1.18Integer32read-writecurrent
espcHumidLowClass
OBJECT-TYPE
Low event class for this humidity sensor
1.3.6.1.4.1.3052.17.2.2.3.1.19DisplayStringread-writecurrent
espcHumidVLowHumid
OBJECT-TYPE
Very low event threshold for this humidity sensor
1.3.6.1.4.1.3052.17.2.2.3.1.20Integer32read-writecurrent
espcHumidVLowActions
OBJECT-TYPE
Very low event actions for this humidity sensor
1.3.6.1.4.1.3052.17.2.2.3.1.21DisplayStringread-writecurrent
espcHumidVLowTrapnum
OBJECT-TYPE
Very low event trap number for this humidity sensor
1.3.6.1.4.1.3052.17.2.2.3.1.22Integer32read-writecurrent
espcHumidVLowClass
OBJECT-TYPE
Very low event class for this humidity sensor
1.3.6.1.4.1.3052.17.2.2.3.1.23DisplayStringread-writecurrent
esPointConfigAITable
OBJECT-TYPE
This table organizes 3 basic attributes of analog input points. A point is a particular sensor on an EventSensor. The 3 point attributes organizes in this table are: 1. the configuration item (e.g., enable, name, etc.) 2. the eventsensor on which this point resides 3. the point number Points are referenced by a point config index. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the context of this analog input point config table ; namely, which EventSensor and which sensor.
1.3.6.1.4.1.3052.17.2.2.5not-accessiblecurrent
esPointConfigAIEntry
OBJECT-TYPE
Entry for EventSensor point config analog input table
1.3.6.1.4.1.3052.17.2.2.5.1not-accessiblecurrent
espcAIIndexES
OBJECT-TYPE
The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the the context of the eventsensor point config contact closure table; namely, which EventSensor and which sensor (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors.
1.3.6.1.4.1.3052.17.2.2.5.1.1Integer32 (1..200)read-onlycurrent
espcAIIndexPoint
OBJECT-TYPE
The part of the point index that delineates which sensor on the EventSensor. So this combined with espcAIIndexES (which EventSensor) uniquely defines each point attached to a unit within the context of contact closure point configuration.
1.3.6.1.4.1.3052.17.2.2.5.1.2Integer32 (1..64)read-onlycurrent
espcAIEnable
OBJECT-TYPE
ON/OFF for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.3DisplayStringread-writecurrent
espcAIPolarity
OBJECT-TYPE
Polarity for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.4DisplayStringread-writecurrent
espcAIDeadband
OBJECT-TYPE
Deadband for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.5Integer32read-writecurrent
espcAIVhighValue
OBJECT-TYPE
Very high event threshold (decivolts or tenths of milliamps) for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.6Integer32read-writecurrent
espcAIVhighActions
OBJECT-TYPE
Very high event actions for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.7DisplayStringread-writecurrent
espcAIVhighTrapnum
OBJECT-TYPE
Very high event trap number for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.8Integer32read-writecurrent
espcAIVhighClass
OBJECT-TYPE
Very high event class for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.9DisplayStringread-writecurrent
espcAIHighValue
OBJECT-TYPE
High event threshold (decivolts or tenths of milliamps) for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.10Integer32read-writecurrent
espcAIHighActions
OBJECT-TYPE
High event actions for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.11DisplayStringread-writecurrent
espcAIHighTrapnum
OBJECT-TYPE
High event trap number for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.12Integer32read-writecurrent
espcAIHighClass
OBJECT-TYPE
High event class for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.13DisplayStringread-writecurrent
espcAINormalActions
OBJECT-TYPE
Return-to-normal actions for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.14DisplayStringread-writecurrent
espcAINormalTrapnum
OBJECT-TYPE
Return-to-normal trap number for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.15Integer32read-writecurrent
espcAINormalClass
OBJECT-TYPE
Return-to-normal class for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.16DisplayStringread-writecurrent
espcAILowValue
OBJECT-TYPE
Low event threshold (decivolts or tenths of milliamps) for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.17Integer32read-writecurrent
espcAILowActions
OBJECT-TYPE
Low event actions for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.18DisplayStringread-writecurrent
espcAILowTrapnum
OBJECT-TYPE
Low event trap number for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.19Integer32read-writecurrent
espcAILowClass
OBJECT-TYPE
Low event class for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.20DisplayStringread-writecurrent
espcAIVlowValue
OBJECT-TYPE
Very low event threshold (decivolts or tenths of milliamps) for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.21Integer32read-writecurrent
espcAIVlowActions
OBJECT-TYPE
Very low event actions for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.22DisplayStringread-writecurrent
espcAIVlowTrapnum
OBJECT-TYPE
Very low event actions for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.23Integer32read-writecurrent
espcAIVlowClass
OBJECT-TYPE
Very low event class for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.24DisplayStringread-writecurrent
espcAIConvUnitName
OBJECT-TYPE
Converstion unit name for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.25DisplayStringread-writecurrent
espcAIConvHighValue
OBJECT-TYPE
Conversion high value for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.26Integer32read-writecurrent
espcAIConvHighUnit
OBJECT-TYPE
Conversion high unit value for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.27Integer32read-writecurrent
espcAIConvHighSign
OBJECT-TYPE
Conversion high sign for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.28DisplayStringread-writecurrent
espcAIConvLowValue
OBJECT-TYPE
Conversion low value for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.29Integer32read-writecurrent
espcAIConvLowUnit
OBJECT-TYPE
Conversion unit low unit value for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.30Integer32read-writecurrent
espcAIConvLowSign
OBJECT-TYPE
Conversion low sign for this analog input sensor
1.3.6.1.4.1.3052.17.2.2.5.1.31DisplayStringread-writecurrent
serialPorts
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.3
numberPorts
OBJECT-TYPE
Number of RS-232 ports found. Range: 2 or 4
1.3.6.1.4.1.3052.17.2.3.1Integer32read-onlycurrent
portConfigTable
OBJECT-TYPE
Port config table
1.3.6.1.4.1.3052.17.2.3.2not-accessiblecurrent
portConfigEntry
OBJECT-TYPE
Port config entry
1.3.6.1.4.1.3052.17.2.3.2.1not-accessiblecurrent
portConfigIndex
OBJECT-TYPE
Index for ports
1.3.6.1.4.1.3052.17.2.3.2.1.1Integer32 (1..16)read-onlycurrent
portConfigBaud
OBJECT-TYPE
Baud rate, 19200, 9600, etc.
1.3.6.1.4.1.3052.17.2.3.2.1.2Integer32read-writecurrent
portConfigDataFormat
OBJECT-TYPE
Value representing word length, parity, and stop bits: 0=8N1, 1=7E1, 2=7O1, 3=7N1, 4=8O2
1.3.6.1.4.1.3052.17.2.3.2.1.3Integer32read-writecurrent
portConfigStripPtOutputLfs
OBJECT-TYPE
Strip passthrough LFs sent to device on this port: 1=yes, 0=no.
1.3.6.1.4.1.3052.17.2.3.2.1.4Integer32read-writecurrent
portConfigStripPtInputLfs
OBJECT-TYPE
Strip passthrough LFs received from device on this port: 1=yes, 0=no.
1.3.6.1.4.1.3052.17.2.3.2.1.5Integer32read-writecurrent
portConfigMaskEnable
OBJECT-TYPE
1=Use the character mask on this port. 0=Do not use the mask. When the mask is enabled, the following ASCII characters are ignored on the port: 0, 1, 4-9, 11, 12, 14-31, 128-255. When the mask is disabled, all characters are accepted on the port.
1.3.6.1.4.1.3052.17.2.3.2.1.7Integer32read-writecurrent
portConfigDAEnable
OBJECT-TYPE
1=Enable the Data Alarm Evaluator for data on this port. 0=Do not evaluate data on this port.
1.3.6.1.4.1.3052.17.2.3.2.1.8Integer32read-writecurrent
portConfigStoreAlarmsDPT
OBJECT-TYPE
ON/OFF: store alarms received during passthrough
1.3.6.1.4.1.3052.17.2.3.2.1.9DisplayStringread-writecurrent
portConfigRecordTimeout
OBJECT-TYPE
Timeout after last unterminated data received upon which data collected so far is stored as a record.
1.3.6.1.4.1.3052.17.2.3.2.1.10Integer32read-writecurrent
portConfigDataType
OBJECT-TYPE
How the port interprets incoming data: ASCII/BINARY
1.3.6.1.4.1.3052.17.2.3.2.1.11DisplayStringread-writecurrent
portConfigEtxToCRLF
OBJECT-TYPE
ON/OFF whether the port translates incoming ETX to CRLF
1.3.6.1.4.1.3052.17.2.3.2.1.12DisplayStringread-writecurrent
portConfigMLREnable
OBJECT-TYPE
ON/OFF Whether Multiline Records are collected on this port.
1.3.6.1.4.1.3052.17.2.3.2.1.13DisplayStringread-writecurrent
portConfigMLRStartField1Pos
OBJECT-TYPE
Position of MLR start field 1
1.3.6.1.4.1.3052.17.2.3.2.1.14Integer32read-writecurrent
portConfigMLRStartField1Text
OBJECT-TYPE
Text to match MLR start field 1
1.3.6.1.4.1.3052.17.2.3.2.1.15DisplayStringread-writecurrent
portConfigMLRStartField2Pos
OBJECT-TYPE
Position of MLR start field 2
1.3.6.1.4.1.3052.17.2.3.2.1.16Integer32read-writecurrent
portConfigMLRStartField2Text
OBJECT-TYPE
Text to match MLR start field 2
1.3.6.1.4.1.3052.17.2.3.2.1.17DisplayStringread-writecurrent
portConfigMLRNumLinesBefore
OBJECT-TYPE
Number of lines before the starting line which should be included in the MLR
1.3.6.1.4.1.3052.17.2.3.2.1.18Integer32read-writecurrent
portConfigMLREndDetection
OBJECT-TYPE
How the MLR parser determines what ends an MLR: by FORMULA, number of lines received so far (COUNT), or number of blank lines received so far (BLANKS)
1.3.6.1.4.1.3052.17.2.3.2.1.19DisplayStringread-writecurrent
portConfigMLRLineCount
OBJECT-TYPE
Number of lines in the MLR (used by the end detection mode)
1.3.6.1.4.1.3052.17.2.3.2.1.20Integer32read-writecurrent
portConfigMLREndField1Pos
OBJECT-TYPE
Position of MLR end field 1
1.3.6.1.4.1.3052.17.2.3.2.1.21Integer32read-writecurrent
portConfigMLREndField1Text
OBJECT-TYPE
Text to match MLR end field 1
1.3.6.1.4.1.3052.17.2.3.2.1.22DisplayStringread-writecurrent
portConfigMLREndField2Pos
OBJECT-TYPE
Position of MLR end field 2
1.3.6.1.4.1.3052.17.2.3.2.1.23Integer32read-writecurrent
portConfigMLREndField2Text
OBJECT-TYPE
Text to match MLR end field 2
1.3.6.1.4.1.3052.17.2.3.2.1.24DisplayStringread-writecurrent
portConfigMLRUseComplexRules
OBJECT-TYPE
ON/OFF MLR parser uses complex rules (field possitions/ formulas, etc.)
1.3.6.1.4.1.3052.17.2.3.2.1.25DisplayStringread-writecurrent
portConfigBufferPT
OBJECT-TYPE
ON/OFF records received during passthrough mode are buffered/stored in the database
1.3.6.1.4.1.3052.17.2.3.2.1.26DisplayStringread-writecurrent
portConfigId
OBJECT-TYPE
The text identifer for the port
1.3.6.1.4.1.3052.17.2.3.2.1.27DisplayStringread-writecurrent
network
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4
interface
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.1
ethernet
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.1.1
ethernet1
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.1.1.1
eth1Mode
OBJECT-TYPE
Mode of the Ethernet1 interface: STATIC,DHCP,VLAN
1.3.6.1.4.1.3052.17.2.4.1.1.1.1DisplayStringread-onlycurrent
eth1Address
OBJECT-TYPE
Ethernet1 IP address
1.3.6.1.4.1.3052.17.2.4.1.1.1.2IpAddressread-writecurrent
eth1SubnetMask
OBJECT-TYPE
Ethernet1 subnet mask
1.3.6.1.4.1.3052.17.2.4.1.1.1.3IpAddressread-writecurrent
eth1Router
OBJECT-TYPE
Ethernet1 router
1.3.6.1.4.1.3052.17.2.4.1.1.1.4IpAddressread-writecurrent
eth1VLAN
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.1.1.1.5
eth1VLAN1
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.1
eth1VLAN1ID
OBJECT-TYPE
Ethernet1 VLAN1 ID
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.1.1Integer32read-writecurrent
eth1VLAN1Priority
OBJECT-TYPE
Ethernet1 VLAN1 priority
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.1.2Integer32read-writecurrent
eth1VLAN1Address
OBJECT-TYPE
Ethernet1 VLAN1 IP address
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.1.3IpAddressread-writecurrent
eth1VLAN1SubnetMask
OBJECT-TYPE
Ethernet1 VLAN1 subnet mask
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.1.4IpAddressread-writecurrent
eth1VLAN1Router
OBJECT-TYPE
Ethernet1 VLAN1 router
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.1.5IpAddressread-writecurrent
eth1VLAN2
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.2
eth1VLAN2ID
OBJECT-TYPE
Ethernet1 VLAN2 ID
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.2.1Integer32read-writecurrent
eth1VLAN2Priority
OBJECT-TYPE
Ethernet1 VLAN2 priority
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.2.2Integer32read-writecurrent
eth1VLAN2Address
OBJECT-TYPE
Ethernet1 VLAN2 IP address
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.2.3IpAddressread-writecurrent
eth1VLAN2SubnetMask
OBJECT-TYPE
Ethernet1 VLAN2 subnet mask
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.2.4IpAddressread-writecurrent
eth1VLAN2Router
OBJECT-TYPE
Ethernet1 VLAN2 router
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.2.5IpAddressread-writecurrent
eth1VLAN3
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.3
eth1VLAN3ID
OBJECT-TYPE
Ethernet1 VLAN3 ID
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.3.1Integer32read-writecurrent
eth1VLAN3Priority
OBJECT-TYPE
Ethernet1 VLAN3 priority
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.3.2Integer32read-writecurrent
eth1VLAN3Address
OBJECT-TYPE
Ethernet1 VLAN3 IP address
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.3.3IpAddressread-writecurrent
eth1VLAN3SubnetMask
OBJECT-TYPE
Ethernet1 VLAN3 subnet mask
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.3.4IpAddressread-writecurrent
eth1VLAN3Router
OBJECT-TYPE
Ethernet1 VLAN3 router
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.3.5IpAddressread-writecurrent
eth1VLAN4
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.4
eth1VLAN4ID
OBJECT-TYPE
Ethernet1 VLAN4 ID
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.4.1Integer32read-writecurrent
eth1VLAN4Priority
OBJECT-TYPE
Ethernet1 VLAN4 priority
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.4.2Integer32read-writecurrent
eth1VLAN4Address
OBJECT-TYPE
Ethernet1 VLAN4 IP address
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.4.3IpAddressread-writecurrent
eth1VLAN4SubnetMask
OBJECT-TYPE
Ethernet1 VLAN4 subnet mask
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.4.4IpAddressread-writecurrent
eth1VLAN4Router
OBJECT-TYPE
Ethernet1 VLAN4 router
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.4.5IpAddressread-writecurrent
eth1VLAN5
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.5
eth1VLAN5ID
OBJECT-TYPE
Ethernet1 VLAN5 ID
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.5.1Integer32read-writecurrent
eth1VLAN5Priority
OBJECT-TYPE
Ethernet1 VLAN5 priority
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.5.2Integer32read-writecurrent
eth1VLAN5Address
OBJECT-TYPE
Ethernet1 VLAN5 IP address
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.5.3IpAddressread-writecurrent
eth1VLAN5SubnetMask
OBJECT-TYPE
Ethernet1 VLAN5 subnet mask
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.5.4IpAddressread-writecurrent
eth1VLAN5Router
OBJECT-TYPE
Ethernet1 VLAN5 router
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.5.5IpAddressread-writecurrent
eth1VLAN6
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.6
eth1VLAN6ID
OBJECT-TYPE
Ethernet1 VLAN6 ID
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.6.1Integer32read-writecurrent
eth1VLAN6Priority
OBJECT-TYPE
Ethernet1 VLAN6 priority
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.6.2Integer32read-writecurrent
eth1VLAN6Address
OBJECT-TYPE
Ethernet1 VLAN6 IP address
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.6.3IpAddressread-writecurrent
eth1VLAN6SubnetMask
OBJECT-TYPE
Ethernet1 VLAN6 subnet mask
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.6.4IpAddressread-writecurrent
eth1VLAN6Router
OBJECT-TYPE
Ethernet1 VLAN6 router
1.3.6.1.4.1.3052.17.2.4.1.1.1.5.6.5IpAddressread-writecurrent
eth1MAC
OBJECT-TYPE
Ethernet1 MAC
1.3.6.1.4.1.3052.17.2.4.1.1.1.6DisplayStringread-onlycurrent
ethernet2
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.1.1.2
eth2Mode
OBJECT-TYPE
Mode of the Ethernet2 interface: STATIC,DHCP,VLAN
1.3.6.1.4.1.3052.17.2.4.1.1.2.1DisplayStringread-onlycurrent
eth2Address
OBJECT-TYPE
Ethernet2 IP address
1.3.6.1.4.1.3052.17.2.4.1.1.2.2IpAddressread-writecurrent
eth2SubnetMask
OBJECT-TYPE
Ethernet2 subnet mask
1.3.6.1.4.1.3052.17.2.4.1.1.2.3IpAddressread-writecurrent
eth2Router
OBJECT-TYPE
Ethernet2 router
1.3.6.1.4.1.3052.17.2.4.1.1.2.4IpAddressread-writecurrent
eth2VLAN
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.1.1.2.5
eth2VLAN1
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.1
eth2VLAN1ID
OBJECT-TYPE
Ethernet2 VLAN1 ID
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.1.1Integer32read-writecurrent
eth2VLAN1Priority
OBJECT-TYPE
Ethernet2 VLAN1 priority
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.1.2Integer32read-writecurrent
eth2VLAN1Address
OBJECT-TYPE
Ethernet2 VLAN1 IP address
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.1.3IpAddressread-writecurrent
eth2VLAN1SubnetMask
OBJECT-TYPE
Ethernet2 VLAN1 subnet mask
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.1.4IpAddressread-writecurrent
eth2VLAN1Router
OBJECT-TYPE
Ethernet2 VLAN1 router
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.1.5IpAddressread-writecurrent
eth2VLAN2
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.2
eth2VLAN2ID
OBJECT-TYPE
Ethernet2 VLAN2 ID
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.2.1Integer32read-writecurrent
eth2VLAN2Priority
OBJECT-TYPE
Ethernet2 VLAN2 priority
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.2.2Integer32read-writecurrent
eth2VLAN2Address
OBJECT-TYPE
Ethernet2 VLAN2 IP address
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.2.3IpAddressread-writecurrent
eth2VLAN2SubnetMask
OBJECT-TYPE
Ethernet2 VLAN2 subnet mask
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.2.4IpAddressread-writecurrent
eth2VLAN2Router
OBJECT-TYPE
Ethernet2 VLAN2 router
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.2.5IpAddressread-writecurrent
eth2VLAN3
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.3
eth2VLAN3ID
OBJECT-TYPE
Ethernet2 VLAN3 ID
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.3.1Integer32read-writecurrent
eth2VLAN3Priority
OBJECT-TYPE
Ethernet2 VLAN3 priority
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.3.2Integer32read-writecurrent
eth2VLAN3Address
OBJECT-TYPE
Ethernet2 VLAN3 IP address
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.3.3IpAddressread-writecurrent
eth2VLAN3SubnetMask
OBJECT-TYPE
Ethernet2 VLAN3 subnet mask
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.3.4IpAddressread-writecurrent
eth2VLAN3Router
OBJECT-TYPE
Ethernet2 VLAN3 router
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.3.5IpAddressread-writecurrent
eth2VLAN4
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.4
eth2VLAN4ID
OBJECT-TYPE
Ethernet2 VLAN4 ID
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.4.1Integer32read-writecurrent
eth2VLAN4Priority
OBJECT-TYPE
Ethernet2 VLAN4 priority
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.4.2Integer32read-writecurrent
eth2VLAN4Address
OBJECT-TYPE
Ethernet2 VLAN4 IP address
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.4.3IpAddressread-writecurrent
eth2VLAN4SubnetMask
OBJECT-TYPE
Ethernet2 VLAN4 subnet mask
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.4.4IpAddressread-writecurrent
eth2VLAN4Router
OBJECT-TYPE
Ethernet2 VLAN4 router
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.4.5IpAddressread-writecurrent
eth2VLAN5
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.5
eth2VLAN5ID
OBJECT-TYPE
Ethernet2 VLAN5 ID
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.5.1Integer32read-writecurrent
eth2VLAN5Priority
OBJECT-TYPE
Ethernet2 VLAN5 priority
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.5.2Integer32read-writecurrent
eth2VLAN5Address
OBJECT-TYPE
Ethernet2 VLAN5 IP address
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.5.3IpAddressread-writecurrent
eth2VLAN5SubnetMask
OBJECT-TYPE
Ethernet2 VLAN5 subnet mask
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.5.4IpAddressread-writecurrent
eth2VLAN5Router
OBJECT-TYPE
Ethernet2 VLAN5 router
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.5.5IpAddressread-writecurrent
eth2VLAN6
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.6
eth2VLAN6ID
OBJECT-TYPE
Ethernet2 VLAN6 ID
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.6.1Integer32read-writecurrent
eth2VLAN6Priority
OBJECT-TYPE
Ethernet2 VLAN6 priority
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.6.2Integer32read-writecurrent
eth2VLAN6Address
OBJECT-TYPE
Ethernet2 VLAN6 IP address
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.6.3IpAddressread-writecurrent
eth2VLAN6SubnetMask
OBJECT-TYPE
Ethernet2 VLAN6 subnet mask
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.6.4IpAddressread-writecurrent
eth2VLAN6Router
OBJECT-TYPE
Ethernet2 VLAN6 router
1.3.6.1.4.1.3052.17.2.4.1.1.2.5.6.5IpAddressread-writecurrent
eth2MAC
OBJECT-TYPE
Ethernet2 MAC
1.3.6.1.4.1.3052.17.2.4.1.1.2.6DisplayStringread-onlycurrent
defaultRouter
OBJECT-TYPE
The default router/gateway
1.3.6.1.4.1.3052.17.2.4.2DisplayStringread-writecurrent
dnsTable
OBJECT-TYPE
DNS server address table
1.3.6.1.4.1.3052.17.2.4.3not-accessiblecurrent
dnsEntry
OBJECT-TYPE
DNS server address entry
1.3.6.1.4.1.3052.17.2.4.3.1not-accessiblecurrent
dnsIndex
OBJECT-TYPE
Index for DNS server address
1.3.6.1.4.1.3052.17.2.4.3.1.1Integer32 (1..2)read-onlycurrent
dnsAddress
OBJECT-TYPE
DNS server address
1.3.6.1.4.1.3052.17.2.4.3.1.2IpAddressread-writecurrent
hostname
OBJECT-TYPE
The hostname of the unit
1.3.6.1.4.1.3052.17.2.4.4DisplayStringread-writecurrent
hostTable
OBJECT-TYPE
Static host table
1.3.6.1.4.1.3052.17.2.4.5not-accessiblecurrent
hostEntry
OBJECT-TYPE
Static host entry
1.3.6.1.4.1.3052.17.2.4.5.1not-accessiblecurrent
hostIndex
OBJECT-TYPE
Index for static host
1.3.6.1.4.1.3052.17.2.4.5.1.1Integer32 (1..2)read-onlycurrent
hostDeclaration
OBJECT-TYPE
Static host declaration string (i.e. 'address hostname')
1.3.6.1.4.1.3052.17.2.4.5.1.2DisplayStringread-writecurrent
ncpDuplex
OBJECT-TYPE
For network command processor: 1=Input characters are echoed; 0=no echo.
1.3.6.1.4.1.3052.17.2.4.6Integer32read-writecurrent
ncpTimeout
OBJECT-TYPE
Network command processor inactivity timeout
1.3.6.1.4.1.3052.17.2.4.7Integer32read-writecurrent
snmp
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.8
snmpAgentEnable
OBJECT-TYPE
ON/OFF for snmp agent
1.3.6.1.4.1.3052.17.2.4.8.1DisplayStringread-writecurrent
snmpNotificationTx
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.8.7
snmpNtfnAttempts
OBJECT-TYPE
Maximum of times the unit attempts to send a notification (trap/inform) in 1 cycle
1.3.6.1.4.1.3052.17.2.4.8.7.1Integer32read-writecurrent
snmpNtfnTimeout
OBJECT-TYPE
Number of seconds between retries of sending a notification
1.3.6.1.4.1.3052.17.2.4.8.7.2Integer32read-writecurrent
snmpNtfnCycles
OBJECT-TYPE
Number of times the unit attempts a group of attempts to send a notification (a cycle)
1.3.6.1.4.1.3052.17.2.4.8.7.3Integer32read-writecurrent
snmpNtfnSnooze
OBJECT-TYPE
Minutes between cycles
1.3.6.1.4.1.3052.17.2.4.8.7.4Integer32read-writecurrent
snmpProxy
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.8.8
snmpProxyTable
OBJECT-TYPE
Table of SNMP proxy entries
1.3.6.1.4.1.3052.17.2.4.8.8.1not-accessiblecurrent
snmpProxyEntry
OBJECT-TYPE
Entry for SNMP proxy table
1.3.6.1.4.1.3052.17.2.4.8.8.1.1not-accessiblecurrent
snmpProxyIndex
OBJECT-TYPE
Index for SNMP proxy table
1.3.6.1.4.1.3052.17.2.4.8.8.1.1.1Integer32 (1..8)read-onlycurrent
snmpProxyOIDBranch
OBJECT-TYPE
The OID branch to trigger the proxy function. This should cover the device to proxy.
1.3.6.1.4.1.3052.17.2.4.8.8.1.1.2DisplayStringread-writecurrent
snmpProxyIP
OBJECT-TYPE
The IP address of the device to proxy.
1.3.6.1.4.1.3052.17.2.4.8.8.1.1.3DisplayStringread-writecurrent
snmpProxyPort
OBJECT-TYPE
The UDP port on which the device to proxy listens.
1.3.6.1.4.1.3052.17.2.4.8.8.1.1.4Integer32 (1..65535)read-writecurrent
snmpPoll
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.8.9
snmpPMode
OBJECT-TYPE
Mode of poll operation: OFF or POLL ONLY (just make the results available to view).
1.3.6.1.4.1.3052.17.2.4.8.9.1DisplayStringread-writecurrent
snmpPRequestTable
OBJECT-TYPE
Table of SNMP Poll requests.
1.3.6.1.4.1.3052.17.2.4.8.9.4not-accessiblecurrent
snmpPRequestEntry
OBJECT-TYPE
Entry for table pf SNMP Poll requests.
1.3.6.1.4.1.3052.17.2.4.8.9.4.1not-accessiblecurrent
snmpPRequestIndex
OBJECT-TYPE
Index for table of SNMP Poll requests.
1.3.6.1.4.1.3052.17.2.4.8.9.4.1.1Integer32 (1..64)read-onlycurrent
snmpPRequestDescription
OBJECT-TYPE
A description for this single telemetry request; no functional effect.
1.3.6.1.4.1.3052.17.2.4.8.9.4.1.2DisplayStringread-writecurrent
snmpPRequestAgent
OBJECT-TYPE
SNMP Agent IP address or hostname for this single telemetry request.
1.3.6.1.4.1.3052.17.2.4.8.9.4.1.3DisplayStringread-writecurrent
snmpPRequestReadcom
OBJECT-TYPE
SNMP read community for this single telemetry request.
1.3.6.1.4.1.3052.17.2.4.8.9.4.1.4DisplayStringread-writecurrent
snmpPRequestOID
OBJECT-TYPE
SNMP object identifier for this single telemetry request.
1.3.6.1.4.1.3052.17.2.4.8.9.4.1.5DisplayStringread-writecurrent
snmpPRequestPeriod
OBJECT-TYPE
How many seconds between periodic SNMP polls of this single telemetry request.
1.3.6.1.4.1.3052.17.2.4.8.9.4.1.6Integer32 (1..255)read-writecurrent
snmpPRequestResultStatus
OBJECT-TYPE
Status of the last attempt for this telemetry request.
1.3.6.1.4.1.3052.17.2.4.8.9.4.1.10DisplayStringread-onlycurrent
snmpPRequestResultValue
OBJECT-TYPE
The telemetry value if the last request was successful.
1.3.6.1.4.1.3052.17.2.4.8.9.4.1.11DisplayStringread-onlycurrent
snmpPRequestResultTime
OBJECT-TYPE
The timestamp of the last telemetry request.
1.3.6.1.4.1.3052.17.2.4.8.9.4.1.12DisplayStringread-onlycurrent
snmpPRequestResultType
OBJECT-TYPE
The type of the telemetry as reported by the agent.
1.3.6.1.4.1.3052.17.2.4.8.9.4.1.13DisplayStringread-onlycurrent
ftpPush
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.9
ftpPushEnable
OBJECT-TYPE
Enable FTP push for REGULAR (protocol: FTP) or SECURE (protocol: SFTP) operation, or disable it (OFF)
1.3.6.1.4.1.3052.17.2.4.9.1DisplayStringread-writecurrent
ftpPushServer
OBJECT-TYPE
FTP server to which data should be pushed
1.3.6.1.4.1.3052.17.2.4.9.2DisplayStringread-writecurrent
ftpPushAccount
OBJECT-TYPE
FTP push account
1.3.6.1.4.1.3052.17.2.4.9.5DisplayStringread-writecurrent
ftpPushDirectory
OBJECT-TYPE
FTP push directory
1.3.6.1.4.1.3052.17.2.4.9.6DisplayStringread-writecurrent
ftpPushperiod
OBJECT-TYPE
Minutes between pushes
1.3.6.1.4.1.3052.17.2.4.9.7Integer32read-writecurrent
ftpPushPushFileTable
OBJECT-TYPE
Table of files to push
1.3.6.1.4.1.3052.17.2.4.9.8not-accessiblecurrent
ftpPushPushFileEntry
OBJECT-TYPE
Entry for table of files to push
1.3.6.1.4.1.3052.17.2.4.9.8.1not-accessiblecurrent
ftpPushPushFileIndex
OBJECT-TYPE
Index for table of files to push
1.3.6.1.4.1.3052.17.2.4.9.8.1.1Integer32 (1..16)read-onlycurrent
ftpPushPushFile
OBJECT-TYPE
ON/OFF push this local FILEx
1.3.6.1.4.1.3052.17.2.4.9.8.1.2DisplayStringread-writecurrent
ftpPushPushAudit
OBJECT-TYPE
ON/OFF push the audit log
1.3.6.1.4.1.3052.17.2.4.9.9DisplayStringread-writecurrent
ftpPushPushAlarms
OBJECT-TYPE
ON/OFF push the alarms/events file
1.3.6.1.4.1.3052.17.2.4.9.10DisplayStringread-writecurrent
ftpPushRemoteFileTable
OBJECT-TYPE
Table of remote names of files to push
1.3.6.1.4.1.3052.17.2.4.9.11not-accessiblecurrent
ftpPushRemoteFileEntry
OBJECT-TYPE
Entry for table of remote names of files to push
1.3.6.1.4.1.3052.17.2.4.9.11.1not-accessiblecurrent
ftpPushRemoteFileIndex
OBJECT-TYPE
Index for table of remote names of files to push
1.3.6.1.4.1.3052.17.2.4.9.11.1.1Integer32 (1..16)read-onlycurrent
ftpPushRemoteFileName
OBJECT-TYPE
remote name of pushed FILEx (name on server)
1.3.6.1.4.1.3052.17.2.4.9.11.1.2DisplayStringread-writecurrent
ftpPushRemoteAlarmName
OBJECT-TYPE
Filename on server for alarms
1.3.6.1.4.1.3052.17.2.4.9.12DisplayStringread-writecurrent
ftpPushPassive
OBJECT-TYPE
ON/OFF use ftp passive mode
1.3.6.1.4.1.3052.17.2.4.9.13DisplayStringread-writecurrent
ftpPushIncludeDate
OBJECT-TYPE
ON/OFF include the date in the name of the pushed file
1.3.6.1.4.1.3052.17.2.4.9.14DisplayStringread-writecurrent
ftpPushIncludeTime
OBJECT-TYPE
ON/OFF include the time in the name of the pushed file
1.3.6.1.4.1.3052.17.2.4.9.15DisplayStringread-writecurrent
ftpPushIncludeSeq
OBJECT-TYPE
ON/OFF include a sequence number in the name of the pushed file
1.3.6.1.4.1.3052.17.2.4.9.16DisplayStringread-writecurrent
routing
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.11
ethRoutingEnable
OBJECT-TYPE
ON/OFF unit routes IP traffic from Ethernet to PPP/Wireless
1.3.6.1.4.1.3052.17.2.4.11.2DisplayStringread-writecurrent
ethRoutingNATEnable
OBJECT-TYPE
ON/OFF unit applies NAT on routed IP frames egressing the unit on its PPP interface
1.3.6.1.4.1.3052.17.2.4.11.3DisplayStringread-writecurrent
netSecurity
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.12
ipRestriction
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.12.1
ipRestrictionTable
OBJECT-TYPE
Table of IP restrictions
1.3.6.1.4.1.3052.17.2.4.12.1.1not-accessiblecurrent
ipRestrictionEntry
OBJECT-TYPE
Entry for table of IP restrictions
1.3.6.1.4.1.3052.17.2.4.12.1.1.1not-accessiblecurrent
ipRestrictionIndex
OBJECT-TYPE
Index for table of IP restrictions
1.3.6.1.4.1.3052.17.2.4.12.1.1.1.1Integer32 (1..8)read-onlycurrent
ipRestrictionEnable
OBJECT-TYPE
ON/OFF enable this IP restriction
1.3.6.1.4.1.3052.17.2.4.12.1.1.1.2DisplayStringread-writecurrent
ipRestrictionMask
OBJECT-TYPE
IP restriction mask
1.3.6.1.4.1.3052.17.2.4.12.1.1.1.3IpAddressread-writecurrent
rts
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.13
rtsFileTable
OBJECT-TYPE
Table of RTS files
1.3.6.1.4.1.3052.17.2.4.13.1not-accessiblecurrent
rtsFileEntry
OBJECT-TYPE
Entry for table of RTS files
1.3.6.1.4.1.3052.17.2.4.13.1.1not-accessiblecurrent
rtsFileIndex
OBJECT-TYPE
Index for table of RTS files
1.3.6.1.4.1.3052.17.2.4.13.1.1.1Integer32 (1..16)read-onlycurrent
rtsFileMode
OBJECT-TYPE
RTS mode (OFF,LISTEN,PUSH) for FILEx
1.3.6.1.4.1.3052.17.2.4.13.1.1.2DisplayStringread-writecurrent
rtsFileShowAnswer
OBJECT-TYPE
Show answer string upon RTS connect for FILEx
1.3.6.1.4.1.3052.17.2.4.13.1.1.3DisplayStringread-writecurrent
rtsFileReqXON
OBJECT-TYPE
ON/OFF require XON to start flow for FILEx
1.3.6.1.4.1.3052.17.2.4.13.1.1.4DisplayStringread-writecurrent
rtsFileTimeout
OBJECT-TYPE
Idle connection close timer (0 means no timeout) for FILEx
1.3.6.1.4.1.3052.17.2.4.13.1.1.5Integer32read-writecurrent
rtsFileEmptyClose
OBJECT-TYPE
ON/OFF close the socket when FILEx is empty
1.3.6.1.4.1.3052.17.2.4.13.1.1.6DisplayStringread-writecurrent
rtsFilePushHost
OBJECT-TYPE
Host to which FILEx should be pushed via RTS
1.3.6.1.4.1.3052.17.2.4.13.1.1.7DisplayStringread-writecurrent
rtsFilePushPort
OBJECT-TYPE
TCP port to which FILEx should be pushed via RTS
1.3.6.1.4.1.3052.17.2.4.13.1.1.8Integer32read-writecurrent
rtsFilePushRetryTimer
OBJECT-TYPE
Retry timer (seconds) for retrying failed RTS push connect attempts
1.3.6.1.4.1.3052.17.2.4.13.1.1.9Integer32read-writecurrent
rtsAlarms
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.13.2
rtsAlarmsMode
OBJECT-TYPE
RTS mode (OFF,LISTEN,PUSH) for alarms file
1.3.6.1.4.1.3052.17.2.4.13.2.1DisplayStringread-writecurrent
rtsAlarmsShowAnswer
OBJECT-TYPE
Show answer string upon RTS connect for alarms file
1.3.6.1.4.1.3052.17.2.4.13.2.2DisplayStringread-writecurrent
rtsAlarmsReqXON
OBJECT-TYPE
ON/OFF require XON to start flow for alarms file
1.3.6.1.4.1.3052.17.2.4.13.2.3DisplayStringread-writecurrent
rtsAlarmsTimeout
OBJECT-TYPE
Idle connection close timer (0 means no timeout) for alarms file
1.3.6.1.4.1.3052.17.2.4.13.2.4Integer32read-writecurrent
rtsAlarmsEmptyClose
OBJECT-TYPE
ON/OFF close the socket when this file is empty for alarms file
1.3.6.1.4.1.3052.17.2.4.13.2.5DisplayStringread-writecurrent
rtsAlarmsPushHost
OBJECT-TYPE
Host to which alarms file should be pushed via RTS
1.3.6.1.4.1.3052.17.2.4.13.2.6DisplayStringread-writecurrent
rtsAlarmsPushPort
OBJECT-TYPE
TCP port to which alarms file should be pushed via RTS
1.3.6.1.4.1.3052.17.2.4.13.2.7Integer32read-writecurrent
rtsAlarmsPushRetryTimer
OBJECT-TYPE
Retry timer (seconds) for retrying failed RTS push connect attempts
1.3.6.1.4.1.3052.17.2.4.13.2.8Integer32read-writecurrent
trap
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.14
trapInclude
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.14.1
trapIncludeDateTime
OBJECT-TYPE
ON/OFF include date and time in stock trap message
1.3.6.1.4.1.3052.17.2.4.14.1.1DisplayStringread-writecurrent
trapIncludeSiteName
OBJECT-TYPE
ON/OFF include site name in stock trap message
1.3.6.1.4.1.3052.17.2.4.14.1.2DisplayStringread-writecurrent
trapIncludeSensorID
OBJECT-TYPE
ON/OFF include sensor ID in stock trap message
1.3.6.1.4.1.3052.17.2.4.14.1.3DisplayStringread-writecurrent
trapIncludeUDName
OBJECT-TYPE
ON/OFF include user defined name in stock trap message
1.3.6.1.4.1.3052.17.2.4.14.1.4DisplayStringread-writecurrent
trapIncludeUDState
OBJECT-TYPE
ON/OFF include user defined state in stock trap message
1.3.6.1.4.1.3052.17.2.4.14.1.5DisplayStringread-writecurrent
trapIncludeSourceAddress
OBJECT-TYPE
ON/OFF include source IP address in stock trap message
1.3.6.1.4.1.3052.17.2.4.14.1.6IpAddressread-writecurrent
trapAuthFailEnable
OBJECT-TYPE
ON/OFF enable trap sent upon SNMP authentication failure
1.3.6.1.4.1.3052.17.2.4.14.2DisplayStringread-writecurrent
wireless
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.16
wirelessMode
OBJECT-TYPE
Wireless mode (OFF,PERMANENT-EDGE)
1.3.6.1.4.1.3052.17.2.4.16.1DisplayStringread-writecurrent
wirelessAPN
OBJECT-TYPE
Wireless access point name
1.3.6.1.4.1.3052.17.2.4.16.2DisplayStringread-writecurrent
wirelessIdleTimeout
OBJECT-TYPE
Wireless idle timeout
1.3.6.1.4.1.3052.17.2.4.16.3Integer32 (3..255)read-writecurrent
wirelessPIN
OBJECT-TYPE
Wireless modem SIM PIN
1.3.6.1.4.1.3052.17.2.4.16.5DisplayStringread-writecurrent
wirelessDRE
OBJECT-TYPE
Default route enable for wireless network interface. When this is ON, the wireless link, if up, becomes the default route, overriding the default route setting (defaultRouter object). When OFF, the default route setting controls the default route and the wireless link does not become the default route.
1.3.6.1.4.1.3052.17.2.4.16.9DisplayStringread-writecurrent
email
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.17
emailServer
OBJECT-TYPE
SMTP server to which the unit sends email
1.3.6.1.4.1.3052.17.2.4.17.1DisplayStringread-writecurrent
emailDomain
OBJECT-TYPE
Domain to use in recipient address
1.3.6.1.4.1.3052.17.2.4.17.2DisplayStringread-writecurrent
emailAuthEnable
OBJECT-TYPE
ON/OFF enable SMTP authentication
1.3.6.1.4.1.3052.17.2.4.17.3DisplayStringread-writecurrent
netAdvanced
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.18
arpFilter
OBJECT-TYPE
ARP filter code
1.3.6.1.4.1.3052.17.2.4.18.1Integer32read-writecurrent
web
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.4.19
webEnable
OBJECT-TYPE
ON/OFF for the web interface
1.3.6.1.4.1.3052.17.2.4.19.1DisplayStringread-writecurrent
webPort
OBJECT-TYPE
TCP port on which web interface listens
1.3.6.1.4.1.3052.17.2.4.19.2Integer32read-writecurrent
webTimeout
OBJECT-TYPE
Web interface session timeout (seconds)
1.3.6.1.4.1.3052.17.2.4.19.3Integer32read-writecurrent
time
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.8
clock
OBJECT-TYPE
Text string for date and time; e.g. 'SUN 01/02/98 12:34:27'. When setting this object, only the date and time are required; the unit will ignore a specified day of week because it is calculated from the date and time. When this object is included in a notification as a varbind, it represents the time that the triggering event occurred.
1.3.6.1.4.1.3052.17.2.8.1DisplayStringread-writecurrent
console
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.10
consoleDuplex
OBJECT-TYPE
ON/OFF characters echoed on telnet command session
1.3.6.1.4.1.3052.17.2.10.1DisplayStringread-writecurrent
consoleTimeout
OBJECT-TYPE
Minutes of inactivity after which telnet command session is terminated
1.3.6.1.4.1.3052.17.2.10.2Integer32read-writecurrent
consoleConfirm
OBJECT-TYPE
ON/OFF Prompt to confirm certain actions
1.3.6.1.4.1.3052.17.2.10.7DisplayStringread-writecurrent
unitSecurity
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.11
secCore
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.11.1
scShowPasswordPrompt
OBJECT-TYPE
ON/OFF show password prompt upon login
1.3.6.1.4.1.3052.17.2.11.1.1DisplayStringread-writecurrent
scConsoleLoginRequired
OBJECT-TYPE
ON/OFF login required upon connecting via console
1.3.6.1.4.1.3052.17.2.11.1.2DisplayStringread-writecurrent
scModemLoginRequired
OBJECT-TYPE
ON/OFF login required upon connecting via modem
1.3.6.1.4.1.3052.17.2.11.1.3DisplayStringread-writecurrent
scTelnetLoginRequired
OBJECT-TYPE
ON/OFF login required upon connecting via Telnet
1.3.6.1.4.1.3052.17.2.11.1.4DisplayStringread-writecurrent
scTelnetPTLoginRequired
OBJECT-TYPE
ON/OFF login required upon connecting via Telnet to pass- through ports (TCP ports 210x)
1.3.6.1.4.1.3052.17.2.11.1.5DisplayStringread-writecurrent
scRTSLoginRequired
OBJECT-TYPE
ON/OFF login required upon connecting to RTS (TCP ports 220x)
1.3.6.1.4.1.3052.17.2.11.1.6DisplayStringread-writecurrent
scAuthMode
OBJECT-TYPE
Authentication mode (USERNAME/PW,PW/USERNAME,PASSWORD ONLY)
1.3.6.1.4.1.3052.17.2.11.1.7DisplayStringread-writecurrent
scRightsGroup
OBJECT-TYPE
The set of aliases used for the 8 available rights levels
1.3.6.1.4.1.3052.17.2.11.1.8DisplayStringread-writecurrent
scSecret
OBJECT-TYPE
Shared secret for challenges
1.3.6.1.4.1.3052.17.2.11.1.9DisplayStringread-writecurrent
secUserTable
OBJECT-TYPE
Table of users
1.3.6.1.4.1.3052.17.2.11.2not-accessiblecurrent
secUserEntry
OBJECT-TYPE
Entry for table of users
1.3.6.1.4.1.3052.17.2.11.2.1not-accessiblecurrent
secUserIndex
OBJECT-TYPE
Index for table of users
1.3.6.1.4.1.3052.17.2.11.2.1.1Integer32 (1..12)read-onlycurrent
secUserEnable
OBJECT-TYPE
ON/OFF enable user
1.3.6.1.4.1.3052.17.2.11.2.1.2DisplayStringread-writecurrent
secUserConnectVia
OBJECT-TYPE
Methods by which user is allowed to connect: L=local (console) T=Telnet F=FTP R=RTS Ss=SSH W=Web
1.3.6.1.4.1.3052.17.2.11.2.1.5DisplayStringread-writecurrent
secUserLoginTo
OBJECT-TYPE
The function presented to the user upon login (COMMAND, PASSTHROUGH,MENU)
1.3.6.1.4.1.3052.17.2.11.2.1.6DisplayStringread-writecurrent
secUserAccessFile
OBJECT-TYPE
The default access file associated with the user
1.3.6.1.4.1.3052.17.2.11.2.1.7DisplayStringread-writecurrent
secUserPTEscapeTo
OBJECT-TYPE
The function presented to the user upon escaping pass- through: currently only MENU
1.3.6.1.4.1.3052.17.2.11.2.1.9DisplayStringread-writecurrent
secUserPPPType
OBJECT-TYPE
The kind of PPP access allowed to this user cannot connect via PPP (NONE), can connect but only to the unit (LOCAL), or can connect and route to Ethernet (ROUTING)
1.3.6.1.4.1.3052.17.2.11.2.1.10DisplayStringread-writecurrent
secUserRights
OBJECT-TYPE
The rights level granted to this user
1.3.6.1.4.1.3052.17.2.11.2.1.11DisplayStringread-writecurrent
secUserEventsReadAccess
OBJECT-TYPE
DENY/ALLOW user to read the events/alarms file
1.3.6.1.4.1.3052.17.2.11.2.1.13DisplayStringread-writecurrent
secUserAuditReadAccess
OBJECT-TYPE
DENY/ALLOW user to read the audit log
1.3.6.1.4.1.3052.17.2.11.2.1.14DisplayStringread-writecurrent
secUserEventsWriteAccess
OBJECT-TYPE
DENY/ALLOW user to delete the events file
1.3.6.1.4.1.3052.17.2.11.2.1.16DisplayStringread-writecurrent
secUserAuditWriteAccess
OBJECT-TYPE
DENY/ALLOW user to write to the audit log
1.3.6.1.4.1.3052.17.2.11.2.1.17DisplayStringread-writecurrent
secUserExpiration
OBJECT-TYPE
Expiration date/time of this user
1.3.6.1.4.1.3052.17.2.11.2.1.18DisplayStringread-writecurrent
secUserCallbackNumber1
OBJECT-TYPE
Number slot 1 the unit calls for dialback
1.3.6.1.4.1.3052.17.2.11.2.1.19DisplayStringread-writecurrent
secUserCallbackNumber2
OBJECT-TYPE
Number slot 2 the unit calls for dialback
1.3.6.1.4.1.3052.17.2.11.2.1.20DisplayStringread-writecurrent
secUserCallbackNumber3
OBJECT-TYPE
Number slot 3 the unit calls for dialback
1.3.6.1.4.1.3052.17.2.11.2.1.21DisplayStringread-writecurrent
secUserChallengeTelnetMode
OBJECT-TYPE
Telnet challenge mode: when user logs in via telnet, unit allows access (OFF), presents a challenge (CHALLENGE), or unit sends a one-time-password (SEND PASSWORD) to a destination configured by secUserChallengeTelnetSendTo
1.3.6.1.4.1.3052.17.2.11.2.1.22DisplayStringread-writecurrent
secUserChallengeModemMode
OBJECT-TYPE
Modem challenge mode: when user logs in via modem, unit allows access (OFF), presents a challenge (CHALLENGE), sends a one-time-password (SEND PASSWORD) to a destination configured by secUserChallengeTelnetSendTo, or dials a number (CALLBACK) configured with secUserCallbackNumberx
1.3.6.1.4.1.3052.17.2.11.2.1.23DisplayStringread-writecurrent
secUserChallengeConsoleMode
OBJECT-TYPE
Console challenge mode: when user logs in via console, unit allows access (OFF), or presents a challenge (CHALLENGE)
1.3.6.1.4.1.3052.17.2.11.2.1.24DisplayStringread-writecurrent
secUserChallengeTelnetSendTo
OBJECT-TYPE
Email action used as the destination address for one-time- password when a user logs in with a challenge mode of SEND PASSWORD
1.3.6.1.4.1.3052.17.2.11.2.1.25DisplayStringread-writecurrent
secUserChallengeModemSendTo
OBJECT-TYPE
Modem action used as the destination phone number for one- time-password when a user logs in with a challenge mode of SEND PASSWORD
1.3.6.1.4.1.3052.17.2.11.2.1.26DisplayStringread-writecurrent
secUserChallengeExpiration
OBJECT-TYPE
Time (in minutes) after which a one-time-password is sent that it can be used to log in
1.3.6.1.4.1.3052.17.2.11.2.1.27Integer32 (0..180)read-writecurrent
secFactory
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.11.3
sfEnable
OBJECT-TYPE
ON/OFF enable factory access
1.3.6.1.4.1.3052.17.2.11.3.1DisplayStringread-writecurrent
sfSecret
OBJECT-TYPE
Secret used for factory access
1.3.6.1.4.1.3052.17.2.11.3.2DisplayStringread-writecurrent
event
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.12
evCore
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.12.1
evClassNameTable
OBJECT-TYPE
Table of classes
1.3.6.1.4.1.3052.17.2.12.1.1not-accessiblecurrent
evClassNameEntry
OBJECT-TYPE
Entry for table of classes
1.3.6.1.4.1.3052.17.2.12.1.1.1not-accessiblecurrent
evClassNameIndex
OBJECT-TYPE
Index for table of classes
1.3.6.1.4.1.3052.17.2.12.1.1.1.1Integer32 (1..12)read-onlycurrent
evClassName
OBJECT-TYPE
Class name for this slot
1.3.6.1.4.1.3052.17.2.12.1.1.1.2DisplayStringread-writecurrent
evReminderInterval
OBJECT-TYPE
Interval (minutes) between EventSensor reminder events
1.3.6.1.4.1.3052.17.2.12.1.2Integer32 (0..65535)read-writecurrent
evLog
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.12.1.3
evLogEnable
OBJECT-TYPE
ON/OFF enable event log
1.3.6.1.4.1.3052.17.2.12.1.3.1DisplayStringread-writecurrent
evLogStoreAlarm
OBJECT-TYPE
ON/OFF store data alarms in event log
1.3.6.1.4.1.3052.17.2.12.1.3.2DisplayStringread-writecurrent
evLogMaxSize
OBJECT-TYPE
max size (in KB) of event log
1.3.6.1.4.1.3052.17.2.12.1.3.3Integer32read-writecurrent
evLogStoreSensor
OBJECT-TYPE
ON/OFF store EventSensor events in event log
1.3.6.1.4.1.3052.17.2.12.1.3.4DisplayStringread-writecurrent
evLogTimeStampAlarms
OBJECT-TYPE
ON/OFF put timestamps on event log entries
1.3.6.1.4.1.3052.17.2.12.1.3.5DisplayStringread-writecurrent
evLogPrependName
OBJECT-TYPE
ON/OFF prepend data event name to data alarm records in event log
1.3.6.1.4.1.3052.17.2.12.1.3.6DisplayStringread-writecurrent
evMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.12.1.4
evMgmtReprocess
OBJECT-TYPE
Number of sensors that have generated events since reset. Write this to reprocess each sensor's last generated event since reset. The value to write determines what kind of events should be reprocessed: 'all': all sensor events 'cc': cc events 'temperature': temperature events 'humidity': humidity events 'analog': analog input events 'fuel': fuel sensor events 'acpm': AC power monitor events 'battery': battery monitor events
1.3.6.1.4.1.3052.17.2.12.1.4.3DisplayStringread-writecurrent
evSched1
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.12.5
evSched1Enable
OBJECT-TYPE
ON/OFF enable this scheduled event
1.3.6.1.4.1.3052.17.2.12.5.1DisplayStringread-writecurrent
evSched1Actions
OBJECT-TYPE
Actions for this scheduled event
1.3.6.1.4.1.3052.17.2.12.5.2DisplayStringread-writecurrent
evSched1Message
OBJECT-TYPE
Message for this scheduled event
1.3.6.1.4.1.3052.17.2.12.5.3DisplayStringread-writecurrent
evSched1TrapNum
OBJECT-TYPE
Trap number for this scheduled event
1.3.6.1.4.1.3052.17.2.12.5.4Integer32read-writecurrent
evSched1Class
OBJECT-TYPE
Class for this scheduled event
1.3.6.1.4.1.3052.17.2.12.5.5DisplayStringread-writecurrent
evSched1Sunday
OBJECT-TYPE
Time on Sunday (HH:MM) when this scheduled event triggers
1.3.6.1.4.1.3052.17.2.12.5.6DisplayStringread-writecurrent
evSched1Monday
OBJECT-TYPE
Time on Monday (HH:MM) when this scheduled event triggers
1.3.6.1.4.1.3052.17.2.12.5.7DisplayStringread-writecurrent
evSched1Tuesday
OBJECT-TYPE
Time on Tuesday (HH:MM) when this scheduled event triggers
1.3.6.1.4.1.3052.17.2.12.5.8DisplayStringread-writecurrent
evSched1Wednesday
OBJECT-TYPE
Time on Wednesday (HH:MM) when this scheduled event triggers
1.3.6.1.4.1.3052.17.2.12.5.9DisplayStringread-writecurrent
evSched1Thursday
OBJECT-TYPE
Time on Thursday (HH:MM) when this scheduled event triggers
1.3.6.1.4.1.3052.17.2.12.5.10DisplayStringread-writecurrent
evSched1Friday
OBJECT-TYPE
Time on Friday (HH:MM) when this scheduled event triggers
1.3.6.1.4.1.3052.17.2.12.5.11DisplayStringread-writecurrent
evSched1Saturday
OBJECT-TYPE
Time on Saturday (HH:MM) when this scheduled event triggers
1.3.6.1.4.1.3052.17.2.12.5.12DisplayStringread-writecurrent
evSched1Exclusions
OBJECT-TYPE
Exclusions (space-separated MM/DD-formatted dates) for this scheduled event
1.3.6.1.4.1.3052.17.2.12.5.13DisplayStringread-writecurrent
evSched2
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.12.6
evSched2Enable
OBJECT-TYPE
ON/OFF enable this scheduled event
1.3.6.1.4.1.3052.17.2.12.6.1DisplayStringread-writecurrent
evSched2Actions
OBJECT-TYPE
Actions for this scheduled event
1.3.6.1.4.1.3052.17.2.12.6.2DisplayStringread-writecurrent
evSched2Message
OBJECT-TYPE
Message for this scheduled event
1.3.6.1.4.1.3052.17.2.12.6.3DisplayStringread-writecurrent
evSched2TrapNum
OBJECT-TYPE
Trap number for this scheduled event
1.3.6.1.4.1.3052.17.2.12.6.4Integer32read-writecurrent
evSched2Class
OBJECT-TYPE
Class for this scheduled event
1.3.6.1.4.1.3052.17.2.12.6.5DisplayStringread-writecurrent
evSched2Sunday
OBJECT-TYPE
Time on Sunday (HH:MM) when this scheduled event triggers
1.3.6.1.4.1.3052.17.2.12.6.6DisplayStringread-writecurrent
evSched2Monday
OBJECT-TYPE
Time on Monday (HH:MM) when this scheduled event triggers
1.3.6.1.4.1.3052.17.2.12.6.7DisplayStringread-writecurrent
evSched2Tuesday
OBJECT-TYPE
Time on Tuesday (HH:MM) when this scheduled event triggers
1.3.6.1.4.1.3052.17.2.12.6.8DisplayStringread-writecurrent
evSched2Wednesday
OBJECT-TYPE
Time on Wednesday (HH:MM) when this scheduled event triggers
1.3.6.1.4.1.3052.17.2.12.6.9DisplayStringread-writecurrent
evSched2Thursday
OBJECT-TYPE
Time on Thursday (HH:MM) when this scheduled event triggers
1.3.6.1.4.1.3052.17.2.12.6.10DisplayStringread-writecurrent
evSched2Friday
OBJECT-TYPE
Time on Friday (HH:MM) when this scheduled event triggers
1.3.6.1.4.1.3052.17.2.12.6.11DisplayStringread-writecurrent
evSched2Saturday
OBJECT-TYPE
Time on Saturday (HH:MM) when this scheduled event triggers
1.3.6.1.4.1.3052.17.2.12.6.12DisplayStringread-writecurrent
evSched2Exclusions
OBJECT-TYPE
Exclusions (space-separated MM/DD-formatted dates) for this scheduled event
1.3.6.1.4.1.3052.17.2.12.6.13DisplayStringread-writecurrent
evShskLowTable
OBJECT-TYPE
Table of serial handshaking low events
1.3.6.1.4.1.3052.17.2.12.7not-accessiblecurrent
evShskLowEntry
OBJECT-TYPE
Entry for table of serial handshaking low events
1.3.6.1.4.1.3052.17.2.12.7.1not-accessiblecurrent
evShskLowIndex
OBJECT-TYPE
Index for table of serial handshaking low events
1.3.6.1.4.1.3052.17.2.12.7.1.1Integer32 (1..16)read-onlycurrent
evShskLowEnable
OBJECT-TYPE
ON/OFF: enable the serial handshaking low event for this port
1.3.6.1.4.1.3052.17.2.12.7.1.2DisplayStringread-writecurrent
evShskLowActions
OBJECT-TYPE
Actions for the serial handshaking low event for this port
1.3.6.1.4.1.3052.17.2.12.7.1.3DisplayStringread-writecurrent
evShskLowMessage
OBJECT-TYPE
Message for the serial handshaking low event for this port
1.3.6.1.4.1.3052.17.2.12.7.1.4DisplayStringread-writecurrent
evShskLowClass
OBJECT-TYPE
Class for the serial handshaking low event for this port
1.3.6.1.4.1.3052.17.2.12.7.1.5DisplayStringread-writecurrent
evShskLowTrapNum
OBJECT-TYPE
Trap number for the serial handshaking low event for this port
1.3.6.1.4.1.3052.17.2.12.7.1.6Integer32read-writecurrent
evShskHighTable
OBJECT-TYPE
Table of serial handshaking high events
1.3.6.1.4.1.3052.17.2.12.8not-accessiblecurrent
evShskHighEntry
OBJECT-TYPE
Entry for table of serial handshaking high events
1.3.6.1.4.1.3052.17.2.12.8.1not-accessiblecurrent
evShskHighIndex
OBJECT-TYPE
Index for table of serial handshaking high events
1.3.6.1.4.1.3052.17.2.12.8.1.1Integer32 (1..16)read-onlycurrent
evShskHighEnable
OBJECT-TYPE
ON/OFF: enable the serial handshaking high event for this port
1.3.6.1.4.1.3052.17.2.12.8.1.2DisplayStringread-writecurrent
evShskHighActions
OBJECT-TYPE
Actions for the serial handshaking high event for this port
1.3.6.1.4.1.3052.17.2.12.8.1.3DisplayStringread-writecurrent
evShskHighMessage
OBJECT-TYPE
Message for the serial handshaking high event for this port
1.3.6.1.4.1.3052.17.2.12.8.1.4DisplayStringread-writecurrent
evShskHighClass
OBJECT-TYPE
Class for the serial handshaking high event for this port
1.3.6.1.4.1.3052.17.2.12.8.1.5DisplayStringread-writecurrent
evShskHighTrapNum
OBJECT-TYPE
Trap number for the serial handshaking high event for this port
1.3.6.1.4.1.3052.17.2.12.8.1.6Integer32read-writecurrent
evNoSensor
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.12.9
evNoSensorTimeout
OBJECT-TYPE
Timeout (seconds) after which an EventSensor becomes unresponsive that this event is triggered
1.3.6.1.4.1.3052.17.2.12.9.1Integer32read-writecurrent
evNoSensorActions
OBJECT-TYPE
Actions for no sensor event
1.3.6.1.4.1.3052.17.2.12.9.2DisplayStringread-writecurrent
evNoSensorTrapNum
OBJECT-TYPE
Trap number for no sensor event
1.3.6.1.4.1.3052.17.2.12.9.3Integer32read-writecurrent
evNoSensorClass
OBJECT-TYPE
Class for no sensor event
1.3.6.1.4.1.3052.17.2.12.9.4DisplayStringread-writecurrent
fuelSensor
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.12.11
fuelSensorGeneralTable
OBJECT-TYPE
This table organizes general fuel sensor attributes.
1.3.6.1.4.1.3052.17.2.12.11.1not-accessiblecurrent
fsGenEntry
OBJECT-TYPE
Entry for fuel sensor general config table.
1.3.6.1.4.1.3052.17.2.12.11.1.1not-accessiblecurrent
fsGenIndex
OBJECT-TYPE
Which fuel sensor in the fuel sensor general config table.
1.3.6.1.4.1.3052.17.2.12.11.1.1.1Integer32 (1..3)read-onlycurrent
fsGenName
OBJECT-TYPE
Fuel sensor name.
1.3.6.1.4.1.3052.17.2.12.11.1.1.2DisplayStringread-writecurrent
fsGenSensorType
OBJECT-TYPE
Type of fuel sensor in use; NONE disables the fuel sensor.
1.3.6.1.4.1.3052.17.2.12.11.1.1.3DisplayStringread-writecurrent
fsGenDistanceUnit
OBJECT-TYPE
Distance units in use when setting and indicating tank dimensions.
1.3.6.1.4.1.3052.17.2.12.11.1.1.4DisplayStringread-writecurrent
fsGenRawValueTop
OBJECT-TYPE
Analog input reading corresponding to the SENSOR FULL point.
1.3.6.1.4.1.3052.17.2.12.11.1.1.5Integer32read-writecurrent
fsGenTopOffset
OBJECT-TYPE
Distance, in the specified distance unit, between the SENSOR FULL point and the TANK FULL point. The value is positive if the SENSOR FULL point is above the TANK FULL point, and negative if it is below.
1.3.6.1.4.1.3052.17.2.12.11.1.1.6DisplayStringread-writecurrent
fsGenRawValueBottom
OBJECT-TYPE
Analog input reading corresponding to the minimum fluid height measurable by the fuel sensor.
1.3.6.1.4.1.3052.17.2.12.11.1.1.7Integer32read-writecurrent
fsGenBottomOffset
OBJECT-TYPE
Distance, in the specified distance unit, between the SENSOR EMPTY point and the TANK EMPTY point. The value is positive if the SENSOR EMPTY point is above the TANK EMPTY point, and negative if it is below.
1.3.6.1.4.1.3052.17.2.12.11.1.1.8DisplayStringread-writecurrent
fsGenInputES
OBJECT-TYPE
Which eventsensor contains the analog input associated with this fuel sensor. Allowed values are 200 (for internal ES), or 1-16.
1.3.6.1.4.1.3052.17.2.12.11.1.1.9Integer32 (1..200)read-writecurrent
fsGenInputPoint
OBJECT-TYPE
Which analog input point, on the specified eventsensor, that is associated with the fuel sensor.
1.3.6.1.4.1.3052.17.2.12.11.1.1.10Integer32 (1..16)read-writecurrent
fsGenFilterAveraging
OBJECT-TYPE
Fuel sensor filter averaging factor.
1.3.6.1.4.1.3052.17.2.12.11.1.1.11Integer32read-writecurrent
fsGenSysrepEnable
OBJECT-TYPE
Fuel sensor System Reporting enable.
1.3.6.1.4.1.3052.17.2.12.11.1.1.12DisplayStringread-writecurrent
fsGenSysrepThreshold
OBJECT-TYPE
Fuel sensor System Reporting threshold (floating point value).
1.3.6.1.4.1.3052.17.2.12.11.1.1.13DisplayStringread-writecurrent
fsGenSysrepLimit
OBJECT-TYPE
Fuel sensor System Reporting limit.
1.3.6.1.4.1.3052.17.2.12.11.1.1.14Integer32read-writecurrent
fsGenSysrepPackage
OBJECT-TYPE
Fuel sensor System Reporting package number.
1.3.6.1.4.1.3052.17.2.12.11.1.1.15Integer32 (0..10)read-writecurrent
fsGenSysrepType
OBJECT-TYPE
Fuel sensor ASM profile type.
1.3.6.1.4.1.3052.17.2.12.11.1.1.16DisplayStringread-writecurrent
fuelSensorTankTable
OBJECT-TYPE
This table organizes tank-specific fuel sensor attributes.
1.3.6.1.4.1.3052.17.2.12.11.2not-accessiblecurrent
fsTankEntry
OBJECT-TYPE
Entry for fuel sensor tank config table.
1.3.6.1.4.1.3052.17.2.12.11.2.1not-accessiblecurrent
fsTankIndex
OBJECT-TYPE
Which fuel sensor in the fuel sensor tank config table.
1.3.6.1.4.1.3052.17.2.12.11.2.1.1Integer32 (1..3)read-onlycurrent
fsTankHeight
OBJECT-TYPE
Height of the tank, from the TANK EMPTY point to the TANK FULL point, in the specified distance unit (i.e. TANK HEIGHT). This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.11.2.1.2DisplayStringread-writecurrent
fsTankDimA
OBJECT-TYPE
Tank dimension measurement A for certain tank profiles. For HORIZ OVAL, this is the length of the straight section. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.11.2.1.3DisplayStringread-writecurrent
fsTankDimB
OBJECT-TYPE
Tank dimension measurement B for certain tank profiles. For HORIZ OVAL, this is the radius of the curved section. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.11.2.1.4DisplayStringread-writecurrent
fsTankVolume
OBJECT-TYPE
How many volume units the tank contains, when full. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.11.2.1.5DisplayStringread-writecurrent
fsTankVolumeUnit
OBJECT-TYPE
Name of the unit representing fluid volume in the tank. This is only used for display purposes; it does not affect the volume calculation.
1.3.6.1.4.1.3052.17.2.12.11.2.1.6DisplayStringread-writecurrent
fsTankShape
OBJECT-TYPE
The shape of the fuel tank. A value of LINEAR produces a fluid volume reading that is directly proportional to fluid height. The HORIZ CYL and HORIZ OVAL settings use a hard-coded formula to calculate the volume. The CUSTOM setting uses a strapping table that must be configured as well (see fuelSensorCustomTankTable).
1.3.6.1.4.1.3052.17.2.12.11.2.1.7DisplayStringread-writecurrent
fuelSensorCustomTankTable
OBJECT-TYPE
This table organizes the custom tank strapping table. Each fuel sensor has a table of height/volume pairs in service only when the tank shape (fsTankShape) in CUSTOM. This allows the unit to calculate volumes for nonstandard tank shapes, to the degree that accurate height/volume measurements can be configured. This SNMP table has two indexes: the first for which fuel sensor and the second for which height/volume pair.
1.3.6.1.4.1.3052.17.2.12.11.3not-accessiblecurrent
fsCustomTankEntry
OBJECT-TYPE
Entry for fuel sensor custom tank config table.
1.3.6.1.4.1.3052.17.2.12.11.3.1not-accessiblecurrent
fsCustomTankIndexFS
OBJECT-TYPE
Which fuel sensor in the fuel sensor tank config table. This is the first of two indexes for this SNMP table.
1.3.6.1.4.1.3052.17.2.12.11.3.1.1Integer32 (1..3)read-onlycurrent
fsCustomTankIndexDatum
OBJECT-TYPE
Which hight/volume pair: there are 32 pairs per fuel sensor. This is the second of two indexes for this SNMP table.
1.3.6.1.4.1.3052.17.2.12.11.3.1.2Integer32 (1..32)read-onlycurrent
fsCustomTankHeight
OBJECT-TYPE
Height of custom tank height/volume pair. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.11.3.1.3DisplayStringread-writecurrent
fsCustomTankVolume
OBJECT-TYPE
Volume of custom tank height/volume pair. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.11.3.1.4DisplayStringread-writecurrent
fuelSensorVolumeTable
OBJECT-TYPE
This table organizes volume-event-specific fuel sensor attributes.
1.3.6.1.4.1.3052.17.2.12.11.4not-accessiblecurrent
fsVolumeEntry
OBJECT-TYPE
Entry for fuel sensor volume event config table.
1.3.6.1.4.1.3052.17.2.12.11.4.1not-accessiblecurrent
fsVolumeIndex
OBJECT-TYPE
Which fuel sensor in the fuel sensor volume event config table.
1.3.6.1.4.1.3052.17.2.12.11.4.1.1Integer32 (1..3)read-onlycurrent
fsVolumeEnable
OBJECT-TYPE
Enable fuel sensor volume events.
1.3.6.1.4.1.3052.17.2.12.11.4.1.2DisplayStringread-writecurrent
fsVolumeDeadband
OBJECT-TYPE
Fuel sensor deadband (hysteresis). This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.11.4.1.3DisplayStringread-writecurrent
fsVolumeVHighValue
OBJECT-TYPE
Fuel sensor volume very high event threshold value. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.11.4.1.4DisplayStringread-writecurrent
fsVolumeVHighActions
OBJECT-TYPE
Fuel sensor volume very high event threshold actions.
1.3.6.1.4.1.3052.17.2.12.11.4.1.5DisplayStringread-writecurrent
fsVolumeVHighTrapNum
OBJECT-TYPE
Fuel sensor volume very high event threshold trap number.
1.3.6.1.4.1.3052.17.2.12.11.4.1.6Integer32 (519..1199)read-writecurrent
fsVolumeVHighClass
OBJECT-TYPE
Fuel sensor volume very high event threshold class (severity).
1.3.6.1.4.1.3052.17.2.12.11.4.1.7DisplayStringread-writecurrent
fsVolumeHighValue
OBJECT-TYPE
Fuel sensor volume high event threshold value. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.11.4.1.8DisplayStringread-writecurrent
fsVolumeHighActions
OBJECT-TYPE
Fuel sensor volume high event threshold actions.
1.3.6.1.4.1.3052.17.2.12.11.4.1.9DisplayStringread-writecurrent
fsVolumeHighTrapNum
OBJECT-TYPE
Fuel sensor volume high event threshold trap number.
1.3.6.1.4.1.3052.17.2.12.11.4.1.10Integer32 (519..1199)read-writecurrent
fsVolumeHighClass
OBJECT-TYPE
Fuel sensor volume high event threshold class (severity).
1.3.6.1.4.1.3052.17.2.12.11.4.1.11DisplayStringread-writecurrent
fsVolumeNormalActions
OBJECT-TYPE
Fuel sensor volume return to normal actions.
1.3.6.1.4.1.3052.17.2.12.11.4.1.12DisplayStringread-writecurrent
fsVolumeNormalTrapNum
OBJECT-TYPE
Fuel sensor volume return to normal trap number.
1.3.6.1.4.1.3052.17.2.12.11.4.1.13Integer32 (519..1199)read-writecurrent
fsVolumeNormalClass
OBJECT-TYPE
Fuel sensor volume return to normal class (severity).
1.3.6.1.4.1.3052.17.2.12.11.4.1.14DisplayStringread-writecurrent
fsVolumeLowValue
OBJECT-TYPE
Fuel sensor volume low event threshold value. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.11.4.1.15DisplayStringread-writecurrent
fsVolumeLowActions
OBJECT-TYPE
Fuel sensor volume low event threshold actions.
1.3.6.1.4.1.3052.17.2.12.11.4.1.16DisplayStringread-writecurrent
fsVolumeLowTrapNum
OBJECT-TYPE
Fuel sensor volume low event threshold trap number.
1.3.6.1.4.1.3052.17.2.12.11.4.1.17Integer32 (519..1199)read-writecurrent
fsVolumeLowClass
OBJECT-TYPE
Fuel sensor volume low event threshold class (severity).
1.3.6.1.4.1.3052.17.2.12.11.4.1.18DisplayStringread-writecurrent
fsVolumeVLowValue
OBJECT-TYPE
Fuel sensor volume very low event threshold value. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.11.4.1.19DisplayStringread-writecurrent
fsVolumeVLowActions
OBJECT-TYPE
Fuel sensor volume very low event threshold actions.
1.3.6.1.4.1.3052.17.2.12.11.4.1.20DisplayStringread-writecurrent
fsVolumeVLowTrapNum
OBJECT-TYPE
Fuel sensor volume very low event threshold trap number.
1.3.6.1.4.1.3052.17.2.12.11.4.1.21Integer32 (519..1199)read-writecurrent
fsVolumeVLowClass
OBJECT-TYPE
Fuel sensor volume very low event threshold class (severity).
1.3.6.1.4.1.3052.17.2.12.11.4.1.22DisplayStringread-writecurrent
fuelSensorDisconnectTable
OBJECT-TYPE
This table organizes disconnect-event-specific fuel sensor attributes.
1.3.6.1.4.1.3052.17.2.12.11.5not-accessiblecurrent
fsDiscEntry
OBJECT-TYPE
Entry for fuel sensor disconnect event config table.
1.3.6.1.4.1.3052.17.2.12.11.5.1not-accessiblecurrent
fsDiscIndex
OBJECT-TYPE
Which fuel sensor in the fuel sensor disconnect event config table.
1.3.6.1.4.1.3052.17.2.12.11.5.1.1Integer32 (1..3)read-onlycurrent
fsDiscEnable
OBJECT-TYPE
Fuel sensor disconnect event enable.
1.3.6.1.4.1.3052.17.2.12.11.5.1.2DisplayStringread-writecurrent
fsDiscHighValue
OBJECT-TYPE
High end of input value range when fuel sensor is disconnected. This is in the units of the analog input value.
1.3.6.1.4.1.3052.17.2.12.11.5.1.3Integer32read-writecurrent
fsDiscLowValue
OBJECT-TYPE
Low end of input value range when fuel sensor is disconnected. This is in the units of the analog input value.
1.3.6.1.4.1.3052.17.2.12.11.5.1.4Integer32read-writecurrent
fsDiscActions
OBJECT-TYPE
Fuel sensor disconnect event actions.
1.3.6.1.4.1.3052.17.2.12.11.5.1.5DisplayStringread-writecurrent
fsDiscTrapNum
OBJECT-TYPE
Fuel sensor disconnect event trap number.
1.3.6.1.4.1.3052.17.2.12.11.5.1.6Integer32 (515..1199)read-writecurrent
fsDiscClass
OBJECT-TYPE
Fuel sensor disconnect event class (severity).
1.3.6.1.4.1.3052.17.2.12.11.5.1.7DisplayStringread-writecurrent
fsDiscNormalActions
OBJECT-TYPE
Fuel sensor disconnect return to normal actions.
1.3.6.1.4.1.3052.17.2.12.11.5.1.8DisplayStringread-writecurrent
fsDiscNormalTrapNum
OBJECT-TYPE
Fuel sensor disconnect return to normal trap number.
1.3.6.1.4.1.3052.17.2.12.11.5.1.9Integer32 (515..1199)read-writecurrent
fsDiscNormalClass
OBJECT-TYPE
Fuel sensor disconnect return to normal class (severity).
1.3.6.1.4.1.3052.17.2.12.11.5.1.10DisplayStringread-writecurrent
fuelSensorSuddenChangeTable
OBJECT-TYPE
This table organizes sudden-change-event-specific fuel sensor attributes.
1.3.6.1.4.1.3052.17.2.12.11.6not-accessiblecurrent
fsSuddenChangeEntry
OBJECT-TYPE
Entry for fuel sensor sudden change event config table.
1.3.6.1.4.1.3052.17.2.12.11.6.1not-accessiblecurrent
fsSuddenChangeIndex
OBJECT-TYPE
Which fuel sensor in the fuel sensor disconnect event config table.
1.3.6.1.4.1.3052.17.2.12.11.6.1.1Integer32 (1..3)read-onlycurrent
fsSuddenChangeEnable
OBJECT-TYPE
Fuel volume sudden change event enable.
1.3.6.1.4.1.3052.17.2.12.11.6.1.2DisplayStringread-writecurrent
fsSuddenChangeTime
OBJECT-TYPE
Fuel volume sudden change event time (minutes): what duration defines 'sudden'.
1.3.6.1.4.1.3052.17.2.12.11.6.1.3Integer32 (5..360)read-writecurrent
fsSuddenChangeAmplitude
OBJECT-TYPE
Fuel volume sudden change event amplitude: what amount (in fuel volume units) over the duration (fsSuddenChangeTime) defines enough change.
1.3.6.1.4.1.3052.17.2.12.11.6.1.4DisplayStringread-writecurrent
fsSuddenChangeActions
OBJECT-TYPE
Fuel volume sudden change event actions.
1.3.6.1.4.1.3052.17.2.12.11.6.1.5DisplayStringread-writecurrent
fsSuddenChangeTrapNum
OBJECT-TYPE
Fuel volume sudden change event trap number.
1.3.6.1.4.1.3052.17.2.12.11.6.1.6Integer32 (527..1199)read-writecurrent
fsSuddenChangeClass
OBJECT-TYPE
Fuel volume sudden change event class (severity).
1.3.6.1.4.1.3052.17.2.12.11.6.1.7DisplayStringread-writecurrent
fuelSensorSlowChangeTable
OBJECT-TYPE
This table organizes slow-change-event-specific fuel sensor attributes.
1.3.6.1.4.1.3052.17.2.12.11.7not-accessiblecurrent
fsSlowChangeEntry
OBJECT-TYPE
Entry for fuel sensor slow change event config table.
1.3.6.1.4.1.3052.17.2.12.11.7.1not-accessiblecurrent
fsSlowChangeIndex
OBJECT-TYPE
Which fuel sensor in the fuel sensor disconnect event config table.
1.3.6.1.4.1.3052.17.2.12.11.7.1.1Integer32 (1..3)read-onlycurrent
fsSlowChangeEnable
OBJECT-TYPE
Fuel volume slow change event enable.
1.3.6.1.4.1.3052.17.2.12.11.7.1.2DisplayStringread-writecurrent
fsSlowChangeTime
OBJECT-TYPE
Fuel volume slow change event time (minutes): what duration defines 'slow'.
1.3.6.1.4.1.3052.17.2.12.11.7.1.3Integer32 (1..168)read-writecurrent
fsSlowChangeAmplitude
OBJECT-TYPE
Fuel volume slow change event amplitude: what amount (in fuel volume units) over the duration (fsSlowChangeTime) defines enough change.
1.3.6.1.4.1.3052.17.2.12.11.7.1.4DisplayStringread-writecurrent
fsSlowChangeActions
OBJECT-TYPE
Fuel volume slow change event actions.
1.3.6.1.4.1.3052.17.2.12.11.7.1.5DisplayStringread-writecurrent
fsSlowChangeTrapNum
OBJECT-TYPE
Fuel volume slow change event trap number.
1.3.6.1.4.1.3052.17.2.12.11.7.1.6Integer32 (528..1199)read-writecurrent
fsSlowChangeClass
OBJECT-TYPE
Fuel volume slow change event class (severity).
1.3.6.1.4.1.3052.17.2.12.11.7.1.7DisplayStringread-writecurrent
acPowerMonitor
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.12.12
acpmGeneralTable
OBJECT-TYPE
This table organizes general AC power monitor attributes.
1.3.6.1.4.1.3052.17.2.12.12.1not-accessiblecurrent
acpmGenEntry
OBJECT-TYPE
Entry for AC power monitor general config table.
1.3.6.1.4.1.3052.17.2.12.12.1.1not-accessiblecurrent
acpmGenIndex
OBJECT-TYPE
Which AC power monitor in the AC power monitor general config table.
1.3.6.1.4.1.3052.17.2.12.12.1.1.1Integer32 (1..6)read-onlycurrent
acpmGenDevice
OBJECT-TYPE
Model of the AC power monitor device. The unit needs this setting to know which registers to poll for the various data items, among other things.
1.3.6.1.4.1.3052.17.2.12.12.1.1.2DisplayStringread-writecurrent
acpmGenName
OBJECT-TYPE
Name for the AC power monitor device.
1.3.6.1.4.1.3052.17.2.12.12.1.1.3DisplayStringread-writecurrent
acpmGenAddress
OBJECT-TYPE
Modbus address of the AC power monitor device.
1.3.6.1.4.1.3052.17.2.12.12.1.1.4Integer32 (1..247)read-writecurrent
acpmGenPtRatio
OBJECT-TYPE
Ratio of secondary turns to primary turns on potential transformers (PT).
1.3.6.1.4.1.3052.17.2.12.12.1.1.5Integer32 (1..10000)read-writecurrent
acpmGenCtRatio
OBJECT-TYPE
Ratio of secondary turns to primary turns on current transformers (CT).
1.3.6.1.4.1.3052.17.2.12.12.1.1.6Integer32 (1..10000)read-writecurrent
acpmGenPowerType
OBJECT-TYPE
Type of power being monitored.
1.3.6.1.4.1.3052.17.2.12.12.1.1.7DisplayStringread-writecurrent
acpmGenSysrepPackage
OBJECT-TYPE
System reporting package number.
1.3.6.1.4.1.3052.17.2.12.12.1.1.8Integer32 (0..10)read-writecurrent
acpmGenSysrepType
OBJECT-TYPE
ASM profile type.
1.3.6.1.4.1.3052.17.2.12.12.1.1.9DisplayStringread-writecurrent
acpmAvgVoltageTable
OBJECT-TYPE
This table organizes AC power monitor average voltage attributes.
1.3.6.1.4.1.3052.17.2.12.12.2not-accessiblecurrent
acpmAvgVoltageEntry
OBJECT-TYPE
Entry for AC power monitor average voltage config table.
1.3.6.1.4.1.3052.17.2.12.12.2.1not-accessiblecurrent
acpmAvgVoltageIndex
OBJECT-TYPE
Which AC power monitor in the AC power monitor average voltage config table.
1.3.6.1.4.1.3052.17.2.12.12.2.1.1Integer32 (1..6)read-onlycurrent
acpmAvgVoltageEnable
OBJECT-TYPE
Enable AC power monitor average voltage events.
1.3.6.1.4.1.3052.17.2.12.12.2.1.2DisplayStringread-writecurrent
acpmAvgVoltageDeadband
OBJECT-TYPE
Deadband (hysteresis) for average voltage event. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.2.1.3DisplayStringread-writecurrent
acpmAvgVoltageVHighValue
OBJECT-TYPE
Very high event threshold. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.2.1.4DisplayStringread-writecurrent
acpmAvgVoltageVHighActions
OBJECT-TYPE
Very high event actions.
1.3.6.1.4.1.3052.17.2.12.12.2.1.5DisplayStringread-writecurrent
acpmAvgVoltageVHighTrapNum
OBJECT-TYPE
Very high event trap number.
1.3.6.1.4.1.3052.17.2.12.12.2.1.6Integer32 (520..1199)read-writecurrent
acpmAvgVoltageVHighClass
OBJECT-TYPE
Very high event class.
1.3.6.1.4.1.3052.17.2.12.12.2.1.7DisplayStringread-writecurrent
acpmAvgVoltageHighValue
OBJECT-TYPE
High event threshold. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.2.1.8DisplayStringread-writecurrent
acpmAvgVoltageHighActions
OBJECT-TYPE
High event actions.
1.3.6.1.4.1.3052.17.2.12.12.2.1.9DisplayStringread-writecurrent
acpmAvgVoltageHighTrapNum
OBJECT-TYPE
High event trap number.
1.3.6.1.4.1.3052.17.2.12.12.2.1.10Integer32 (520..1199)read-writecurrent
acpmAvgVoltageHighClass
OBJECT-TYPE
High event class.
1.3.6.1.4.1.3052.17.2.12.12.2.1.11DisplayStringread-writecurrent
acpmAvgVoltageNormalActions
OBJECT-TYPE
Return to normal actions.
1.3.6.1.4.1.3052.17.2.12.12.2.1.12DisplayStringread-writecurrent
acpmAvgVoltageNormalTrapNum
OBJECT-TYPE
Return to normal trap number.
1.3.6.1.4.1.3052.17.2.12.12.2.1.13Integer32 (520..1199)read-writecurrent
acpmAvgVoltageNormalClass
OBJECT-TYPE
Return to normal class.
1.3.6.1.4.1.3052.17.2.12.12.2.1.14DisplayStringread-writecurrent
acpmAvgVoltageLowValue
OBJECT-TYPE
Low event threshold. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.2.1.15DisplayStringread-writecurrent
acpmAvgVoltageLowActions
OBJECT-TYPE
Low event actions.
1.3.6.1.4.1.3052.17.2.12.12.2.1.16DisplayStringread-writecurrent
acpmAvgVoltageLowTrapNum
OBJECT-TYPE
Low event trap number.
1.3.6.1.4.1.3052.17.2.12.12.2.1.17Integer32 (520..1199)read-writecurrent
acpmAvgVoltageLowClass
OBJECT-TYPE
Low event class.
1.3.6.1.4.1.3052.17.2.12.12.2.1.18DisplayStringread-writecurrent
acpmAvgVoltageVLowValue
OBJECT-TYPE
Very low event threshold. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.2.1.19DisplayStringread-writecurrent
acpmAvgVoltageVLowActions
OBJECT-TYPE
Very low event actions.
1.3.6.1.4.1.3052.17.2.12.12.2.1.20DisplayStringread-writecurrent
acpmAvgVoltageVLowTrapNum
OBJECT-TYPE
Very low event trap number.
1.3.6.1.4.1.3052.17.2.12.12.2.1.21Integer32 (520..1199)read-writecurrent
acpmAvgVoltageVLowClass
OBJECT-TYPE
Very low event class.
1.3.6.1.4.1.3052.17.2.12.12.2.1.22DisplayStringread-writecurrent
acpmAvgVoltageSysrepEnable
OBJECT-TYPE
System reporting enable for average voltage telemetry.
1.3.6.1.4.1.3052.17.2.12.12.2.1.23DisplayStringread-writecurrent
acpmAvgVoltageSysrepThreshold
OBJECT-TYPE
System reporting threshold for average voltage telemetry. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.2.1.24DisplayStringread-writecurrent
acpmAvgVoltageSysrepLimit
OBJECT-TYPE
System reporting limit for average voltage telemetry.
1.3.6.1.4.1.3052.17.2.12.12.2.1.25Integer32read-writecurrent
acpmAvgCurrentTable
OBJECT-TYPE
This table organizes AC power monitor average current attributes.
1.3.6.1.4.1.3052.17.2.12.12.3not-accessiblecurrent
acpmAvgCurrentEntry
OBJECT-TYPE
Entry for AC power monitor average current config table.
1.3.6.1.4.1.3052.17.2.12.12.3.1not-accessiblecurrent
acpmAvgCurrentIndex
OBJECT-TYPE
Which AC power monitor in the AC power monitor average current config table.
1.3.6.1.4.1.3052.17.2.12.12.3.1.1Integer32 (1..6)read-onlycurrent
acpmAvgCurrentEnable
OBJECT-TYPE
Enable AC power monitor average current events.
1.3.6.1.4.1.3052.17.2.12.12.3.1.2DisplayStringread-writecurrent
acpmAvgCurrentDeadband
OBJECT-TYPE
Deadband (hysteresis) for average current event. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.3.1.3DisplayStringread-writecurrent
acpmAvgCurrentVHighValue
OBJECT-TYPE
Very high event threshold. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.3.1.4DisplayStringread-writecurrent
acpmAvgCurrentVHighActions
OBJECT-TYPE
Very high event actions.
1.3.6.1.4.1.3052.17.2.12.12.3.1.5DisplayStringread-writecurrent
acpmAvgCurrentVHighTrapNum
OBJECT-TYPE
Very high event trap number.
1.3.6.1.4.1.3052.17.2.12.12.3.1.6Integer32 (521..1199)read-writecurrent
acpmAvgCurrentVHighClass
OBJECT-TYPE
Very high event class.
1.3.6.1.4.1.3052.17.2.12.12.3.1.7DisplayStringread-writecurrent
acpmAvgCurrentHighValue
OBJECT-TYPE
High event threshold. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.3.1.8DisplayStringread-writecurrent
acpmAvgCurrentHighActions
OBJECT-TYPE
High event actions.
1.3.6.1.4.1.3052.17.2.12.12.3.1.9DisplayStringread-writecurrent
acpmAvgCurrentHighTrapNum
OBJECT-TYPE
High event trap number.
1.3.6.1.4.1.3052.17.2.12.12.3.1.10Integer32 (521..1199)read-writecurrent
acpmAvgCurrentHighClass
OBJECT-TYPE
High event class.
1.3.6.1.4.1.3052.17.2.12.12.3.1.11DisplayStringread-writecurrent
acpmAvgCurrentNormalActions
OBJECT-TYPE
Return to normal actions.
1.3.6.1.4.1.3052.17.2.12.12.3.1.12DisplayStringread-writecurrent
acpmAvgCurrentNormalTrapNum
OBJECT-TYPE
Return to normal trap number.
1.3.6.1.4.1.3052.17.2.12.12.3.1.13Integer32 (521..1199)read-writecurrent
acpmAvgCurrentNormalClass
OBJECT-TYPE
Return to normal class.
1.3.6.1.4.1.3052.17.2.12.12.3.1.14DisplayStringread-writecurrent
acpmAvgCurrentLowValue
OBJECT-TYPE
Low event threshold. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.3.1.15DisplayStringread-writecurrent
acpmAvgCurrentLowActions
OBJECT-TYPE
Low event actions.
1.3.6.1.4.1.3052.17.2.12.12.3.1.16DisplayStringread-writecurrent
acpmAvgCurrentLowTrapNum
OBJECT-TYPE
Low event trap number.
1.3.6.1.4.1.3052.17.2.12.12.3.1.17Integer32 (521..1199)read-writecurrent
acpmAvgCurrentLowClass
OBJECT-TYPE
Low event class.
1.3.6.1.4.1.3052.17.2.12.12.3.1.18DisplayStringread-writecurrent
acpmAvgCurrentVLowValue
OBJECT-TYPE
Very low event threshold. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.3.1.19DisplayStringread-writecurrent
acpmAvgCurrentVLowActions
OBJECT-TYPE
Very low event actions.
1.3.6.1.4.1.3052.17.2.12.12.3.1.20DisplayStringread-writecurrent
acpmAvgCurrentVLowTrapNum
OBJECT-TYPE
Very low event trap number.
1.3.6.1.4.1.3052.17.2.12.12.3.1.21Integer32 (521..1199)read-writecurrent
acpmAvgCurrentVLowClass
OBJECT-TYPE
Very low event class.
1.3.6.1.4.1.3052.17.2.12.12.3.1.22DisplayStringread-writecurrent
acpmAvgCurrentSysrepEnable
OBJECT-TYPE
System reporting enable for average current telemetry.
1.3.6.1.4.1.3052.17.2.12.12.3.1.23DisplayStringread-writecurrent
acpmAvgCurrentSysrepThreshold
OBJECT-TYPE
System reporting threshold for average current telemetry. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.3.1.24DisplayStringread-writecurrent
acpmAvgCurrentSysrepLimit
OBJECT-TYPE
System reporting limit for average current telemetry.
1.3.6.1.4.1.3052.17.2.12.12.3.1.25Integer32read-writecurrent
acpmFreqTable
OBJECT-TYPE
This table organizes AC power monitor frequency attributes.
1.3.6.1.4.1.3052.17.2.12.12.4not-accessiblecurrent
acpmFreqEntry
OBJECT-TYPE
Entry for AC power monitor frequency config table.
1.3.6.1.4.1.3052.17.2.12.12.4.1not-accessiblecurrent
acpmFreqIndex
OBJECT-TYPE
Which AC power monitor in the AC power monitor frequency config table.
1.3.6.1.4.1.3052.17.2.12.12.4.1.1Integer32 (1..6)read-onlycurrent
acpmFreqEnable
OBJECT-TYPE
Enable AC power monitor frequency events.
1.3.6.1.4.1.3052.17.2.12.12.4.1.2DisplayStringread-writecurrent
acpmFreqDeadband
OBJECT-TYPE
Deadband (hysteresis) for frequency event. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.4.1.3DisplayStringread-writecurrent
acpmFreqVHighValue
OBJECT-TYPE
Very high event threshold. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.4.1.4DisplayStringread-writecurrent
acpmFreqVHighActions
OBJECT-TYPE
Very high event actions.
1.3.6.1.4.1.3052.17.2.12.12.4.1.5DisplayStringread-writecurrent
acpmFreqVHighTrapNum
OBJECT-TYPE
Very high event trap number.
1.3.6.1.4.1.3052.17.2.12.12.4.1.6Integer32 (522..1199)read-writecurrent
acpmFreqVHighClass
OBJECT-TYPE
Very high event class.
1.3.6.1.4.1.3052.17.2.12.12.4.1.7DisplayStringread-writecurrent
acpmFreqHighValue
OBJECT-TYPE
High event threshold. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.4.1.8DisplayStringread-writecurrent
acpmFreqHighActions
OBJECT-TYPE
High event actions.
1.3.6.1.4.1.3052.17.2.12.12.4.1.9DisplayStringread-writecurrent
acpmFreqHighTrapNum
OBJECT-TYPE
High event trap number.
1.3.6.1.4.1.3052.17.2.12.12.4.1.10Integer32 (522..1199)read-writecurrent
acpmFreqHighClass
OBJECT-TYPE
High event class.
1.3.6.1.4.1.3052.17.2.12.12.4.1.11DisplayStringread-writecurrent
acpmFreqNormalActions
OBJECT-TYPE
Return to normal actions.
1.3.6.1.4.1.3052.17.2.12.12.4.1.12DisplayStringread-writecurrent
acpmFreqNormalTrapNum
OBJECT-TYPE
Return to normal trap number.
1.3.6.1.4.1.3052.17.2.12.12.4.1.13Integer32 (522..1199)read-writecurrent
acpmFreqNormalClass
OBJECT-TYPE
Return to normal class.
1.3.6.1.4.1.3052.17.2.12.12.4.1.14DisplayStringread-writecurrent
acpmFreqLowValue
OBJECT-TYPE
Low event threshold. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.4.1.15DisplayStringread-writecurrent
acpmFreqLowActions
OBJECT-TYPE
Low event actions.
1.3.6.1.4.1.3052.17.2.12.12.4.1.16DisplayStringread-writecurrent
acpmFreqLowTrapNum
OBJECT-TYPE
Low event trap number.
1.3.6.1.4.1.3052.17.2.12.12.4.1.17Integer32 (522..1199)read-writecurrent
acpmFreqLowClass
OBJECT-TYPE
Low event class.
1.3.6.1.4.1.3052.17.2.12.12.4.1.18DisplayStringread-writecurrent
acpmFreqVLowValue
OBJECT-TYPE
Very low event threshold. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.4.1.19DisplayStringread-writecurrent
acpmFreqVLowActions
OBJECT-TYPE
Very low event actions.
1.3.6.1.4.1.3052.17.2.12.12.4.1.20DisplayStringread-writecurrent
acpmFreqVLowTrapNum
OBJECT-TYPE
Very low event trap number.
1.3.6.1.4.1.3052.17.2.12.12.4.1.21Integer32 (522..1199)read-writecurrent
acpmFreqVLowClass
OBJECT-TYPE
Very low event class.
1.3.6.1.4.1.3052.17.2.12.12.4.1.22DisplayStringread-writecurrent
acpmFreqSysrepEnable
OBJECT-TYPE
System reporting enable for frequency telemetry.
1.3.6.1.4.1.3052.17.2.12.12.4.1.23DisplayStringread-writecurrent
acpmFreqSysrepThreshold
OBJECT-TYPE
System reporting threshold for frequency telemetry. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.4.1.24DisplayStringread-writecurrent
acpmFreqSysrepLimit
OBJECT-TYPE
System reporting limit for frequency telemetry.
1.3.6.1.4.1.3052.17.2.12.12.4.1.25Integer32read-writecurrent
acpmTotalRealPowerTable
OBJECT-TYPE
This table organizes AC power monitor total real power attributes.
1.3.6.1.4.1.3052.17.2.12.12.5not-accessiblecurrent
acpmTRPEntry
OBJECT-TYPE
Entry for AC power monitor total real power config table.
1.3.6.1.4.1.3052.17.2.12.12.5.1not-accessiblecurrent
acpmTRPIndex
OBJECT-TYPE
Which AC power monitor in the AC power monitor total real power config table.
1.3.6.1.4.1.3052.17.2.12.12.5.1.1Integer32 (1..6)read-onlycurrent
acpmTRPEnable
OBJECT-TYPE
Enable AC power monitor total real power events.
1.3.6.1.4.1.3052.17.2.12.12.5.1.2DisplayStringread-writecurrent
acpmTRPDeadband
OBJECT-TYPE
Deadband (hysteresis) for total real power event. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.5.1.3DisplayStringread-writecurrent
acpmTRPVHighValue
OBJECT-TYPE
Very high event threshold. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.5.1.4DisplayStringread-writecurrent
acpmTRPVHighActions
OBJECT-TYPE
Very high event actions.
1.3.6.1.4.1.3052.17.2.12.12.5.1.5DisplayStringread-writecurrent
acpmTRPVHighTrapNum
OBJECT-TYPE
Very high event trap number.
1.3.6.1.4.1.3052.17.2.12.12.5.1.6Integer32 (523..1199)read-writecurrent
acpmTRPVHighClass
OBJECT-TYPE
Very high event class.
1.3.6.1.4.1.3052.17.2.12.12.5.1.7DisplayStringread-writecurrent
acpmTRPHighValue
OBJECT-TYPE
High event threshold. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.5.1.8DisplayStringread-writecurrent
acpmTRPHighActions
OBJECT-TYPE
High event actions.
1.3.6.1.4.1.3052.17.2.12.12.5.1.9DisplayStringread-writecurrent
acpmTRPHighTrapNum
OBJECT-TYPE
High event trap number.
1.3.6.1.4.1.3052.17.2.12.12.5.1.10Integer32 (523..1199)read-writecurrent
acpmTRPHighClass
OBJECT-TYPE
High event class.
1.3.6.1.4.1.3052.17.2.12.12.5.1.11DisplayStringread-writecurrent
acpmTRPNormalActions
OBJECT-TYPE
Return to normal actions.
1.3.6.1.4.1.3052.17.2.12.12.5.1.12DisplayStringread-writecurrent
acpmTRPNormalTrapNum
OBJECT-TYPE
Return to normal trap number.
1.3.6.1.4.1.3052.17.2.12.12.5.1.13Integer32 (523..1199)read-writecurrent
acpmTRPNormalClass
OBJECT-TYPE
Return to normal class.
1.3.6.1.4.1.3052.17.2.12.12.5.1.14DisplayStringread-writecurrent
acpmTRPLowValue
OBJECT-TYPE
Low event threshold. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.5.1.15DisplayStringread-writecurrent
acpmTRPLowActions
OBJECT-TYPE
Low event actions.
1.3.6.1.4.1.3052.17.2.12.12.5.1.16DisplayStringread-writecurrent
acpmTRPLowTrapNum
OBJECT-TYPE
Low event trap number.
1.3.6.1.4.1.3052.17.2.12.12.5.1.17Integer32 (523..1199)read-writecurrent
acpmTRPLowClass
OBJECT-TYPE
Low event class.
1.3.6.1.4.1.3052.17.2.12.12.5.1.18DisplayStringread-writecurrent
acpmTRPVLowValue
OBJECT-TYPE
Very low event threshold. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.5.1.19DisplayStringread-writecurrent
acpmTRPVLowActions
OBJECT-TYPE
Very low event actions.
1.3.6.1.4.1.3052.17.2.12.12.5.1.20DisplayStringread-writecurrent
acpmTRPVLowTrapNum
OBJECT-TYPE
Very low event trap number.
1.3.6.1.4.1.3052.17.2.12.12.5.1.21Integer32 (523..1199)read-writecurrent
acpmTRPVLowClass
OBJECT-TYPE
Very low event class.
1.3.6.1.4.1.3052.17.2.12.12.5.1.22DisplayStringread-writecurrent
acpmTRPSysrepEnable
OBJECT-TYPE
System reporting enable for total real power telemetry.
1.3.6.1.4.1.3052.17.2.12.12.5.1.23DisplayStringread-writecurrent
acpmTRPSysrepThreshold
OBJECT-TYPE
System reporting threshold for total real power telemetry. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.12.5.1.24DisplayStringread-writecurrent
acpmTRPSysrepLimit
OBJECT-TYPE
System reporting limit for total real power telemetry.
1.3.6.1.4.1.3052.17.2.12.12.5.1.25Integer32read-writecurrent
acpmDisconnectTable
OBJECT-TYPE
This table organizes AC power monitor device disconnect event attributes.
1.3.6.1.4.1.3052.17.2.12.12.6not-accessiblecurrent
acpmDisconnectEntry
OBJECT-TYPE
Entry for AC power monitor device disconnect event config table.
1.3.6.1.4.1.3052.17.2.12.12.6.1not-accessiblecurrent
acpmDisconnectIndex
OBJECT-TYPE
Which AC power monitor in the AC power monitor device disconnect event config table.
1.3.6.1.4.1.3052.17.2.12.12.6.1.1Integer32 (1..6)read-onlycurrent
acpmDisconnectEnable
OBJECT-TYPE
Enable AC power monitor device disconnect event.
1.3.6.1.4.1.3052.17.2.12.12.6.1.2DisplayStringread-writecurrent
acpmDisconnectActions
OBJECT-TYPE
Actions for disconnect event.
1.3.6.1.4.1.3052.17.2.12.12.6.1.3DisplayStringread-writecurrent
acpmDisconnectTrapNum
OBJECT-TYPE
Trap number for disconnect event.
1.3.6.1.4.1.3052.17.2.12.12.6.1.4Integer32 (524..1199)read-writecurrent
acpmDisconnectClass
OBJECT-TYPE
Class for disconnect event.
1.3.6.1.4.1.3052.17.2.12.12.6.1.5DisplayStringread-writecurrent
acpmDisconnectNormalActions
OBJECT-TYPE
Actions for disconnect return to normal event.
1.3.6.1.4.1.3052.17.2.12.12.6.1.6DisplayStringread-writecurrent
acpmDisconnectNormalTrapNum
OBJECT-TYPE
Trap number for disconnect return to normal event.
1.3.6.1.4.1.3052.17.2.12.12.6.1.7Integer32 (524..1199)read-writecurrent
acpmDisconnectNormalClass
OBJECT-TYPE
Class for disconnect return to normal event.
1.3.6.1.4.1.3052.17.2.12.12.6.1.8DisplayStringread-writecurrent
acpmTotalPowerFactorTable
OBJECT-TYPE
This table organizes AC power monitor device total power factor event attributes.
1.3.6.1.4.1.3052.17.2.12.12.7not-accessiblecurrent
acpmTPFEntry
OBJECT-TYPE
Entry for AC power monitor device total power factor event config table.
1.3.6.1.4.1.3052.17.2.12.12.7.1not-accessiblecurrent
acpmTPFIndex
OBJECT-TYPE
Which AC power monitor in the AC power monitor device disconnect event config table.
1.3.6.1.4.1.3052.17.2.12.12.7.1.1Integer32 (1..6)read-onlycurrent
acpmTPFEnable
OBJECT-TYPE
Enable AC power monitor device disconnect event.
1.3.6.1.4.1.3052.17.2.12.12.7.1.2DisplayStringread-writecurrent
acpmTPFDeadband
OBJECT-TYPE
Deadband (hysteresis).
1.3.6.1.4.1.3052.17.2.12.12.7.1.3DisplayStringread-writecurrent
acpmTPFNormalActions
OBJECT-TYPE
Normal actions.
1.3.6.1.4.1.3052.17.2.12.12.7.1.4DisplayStringread-writecurrent
acpmTPFNormalTrapNum
OBJECT-TYPE
Normal trap number.
1.3.6.1.4.1.3052.17.2.12.12.7.1.5Integer32read-writecurrent
acpmTPFNormalClass
OBJECT-TYPE
Normal class.
1.3.6.1.4.1.3052.17.2.12.12.7.1.6DisplayStringread-writecurrent
acpmTPFLowValue
OBJECT-TYPE
Low threshold.
1.3.6.1.4.1.3052.17.2.12.12.7.1.7DisplayStringread-writecurrent
acpmTPFLowActions
OBJECT-TYPE
Low actions.
1.3.6.1.4.1.3052.17.2.12.12.7.1.8DisplayStringread-writecurrent
acpmTPFLowTrapNum
OBJECT-TYPE
Low trap number.
1.3.6.1.4.1.3052.17.2.12.12.7.1.9Integer32read-writecurrent
acpmTPFLowClass
OBJECT-TYPE
Low class.
1.3.6.1.4.1.3052.17.2.12.12.7.1.10DisplayStringread-writecurrent
acpmTPFVLowValue
OBJECT-TYPE
Very Low threshold.
1.3.6.1.4.1.3052.17.2.12.12.7.1.11DisplayStringread-writecurrent
acpmTPFVLowActions
OBJECT-TYPE
Very Low actions.
1.3.6.1.4.1.3052.17.2.12.12.7.1.12DisplayStringread-writecurrent
acpmTPFVLowTrapNum
OBJECT-TYPE
Very Low trap number.
1.3.6.1.4.1.3052.17.2.12.12.7.1.13Integer32read-writecurrent
acpmTPFVLowClass
OBJECT-TYPE
Very Low class.
1.3.6.1.4.1.3052.17.2.12.12.7.1.14DisplayStringread-writecurrent
acpmTPFSysrepEnable
OBJECT-TYPE
System reporting enable.
1.3.6.1.4.1.3052.17.2.12.12.7.1.15DisplayStringread-writecurrent
acpmTPFSysrepThreshold
OBJECT-TYPE
System reporting threshold.
1.3.6.1.4.1.3052.17.2.12.12.7.1.16DisplayStringread-writecurrent
acpmTPFSysrepLimit
OBJECT-TYPE
System reporting limit.
1.3.6.1.4.1.3052.17.2.12.12.7.1.17Integer32read-writecurrent
batteryMonitor
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.12.14
batteryMonitorGeneralTable
OBJECT-TYPE
This table organizes general battery monitor attributes.
1.3.6.1.4.1.3052.17.2.12.14.1not-accessiblecurrent
bmGenEntry
OBJECT-TYPE
Entry for battery monitor general config table.
1.3.6.1.4.1.3052.17.2.12.14.1.1not-accessiblecurrent
bmGenIndex
OBJECT-TYPE
Which battery monitor in the battery monitor general config table.
1.3.6.1.4.1.3052.17.2.12.14.1.1.1Integer32 (1..9)read-onlycurrent
bmGenEnable
OBJECT-TYPE
Which battery monitor in the battery monitor general config table.
1.3.6.1.4.1.3052.17.2.12.14.1.1.2DisplayStringread-writecurrent
bmGenName
OBJECT-TYPE
Name for this battery monitor.
1.3.6.1.4.1.3052.17.2.12.14.1.1.3DisplayStringread-writecurrent
bmGenBatteryQuantity
OBJECT-TYPE
Number of batteries in the string.
1.3.6.1.4.1.3052.17.2.12.14.1.1.4Integer32 (1..4)read-writecurrent
bmGenBatteryCapacity
OBJECT-TYPE
Capacity of the individual batteries in the string, in amp-hours. A single value applies to all batteries; that is, they are assumed to be all of the same capacity.
1.3.6.1.4.1.3052.17.2.12.14.1.1.5Integer32 (5..500)read-writecurrent
bmGenBatteryNominalVoltage
OBJECT-TYPE
Nominal voltage of the individual batteries in the string, in volts. A single value applies to all batteres; that is, they are assumed to be all of the same voltage. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.14.1.1.6DisplayStringread-writecurrent
bmGenSysrepPackage
OBJECT-TYPE
System reporting package number.
1.3.6.1.4.1.3052.17.2.12.14.1.1.7Integer32 (0..10)read-writecurrent
bmGenSysrepType
OBJECT-TYPE
System reporting ASM profile type.
1.3.6.1.4.1.3052.17.2.12.14.1.1.8DisplayStringread-writecurrent
batteryMonitorDeviceTable
OBJECT-TYPE
This table organizes temperature battery monitor attributes.
1.3.6.1.4.1.3052.17.2.12.14.2not-accessiblecurrent
bmDeviceEntry
OBJECT-TYPE
Entry for battery monitor temperature config table.
1.3.6.1.4.1.3052.17.2.12.14.2.1not-accessiblecurrent
bmDeviceIndex
OBJECT-TYPE
Which battery monitor in the battery monitor device config table.
1.3.6.1.4.1.3052.17.2.12.14.2.1.1Integer32 (1..9)read-onlycurrent
bmDeviceType
OBJECT-TYPE
The type of hardware battery monitor unit associated with this battery monitor.
1.3.6.1.4.1.3052.17.2.12.14.2.1.2DisplayStringread-writecurrent
bmDeviceES
OBJECT-TYPE
The ES index of the hardware battery monitor unit associated with this battery monitor. This setting only pertains to the ES-BMU.
1.3.6.1.4.1.3052.17.2.12.14.2.1.3Integer32 (1..16)read-writecurrent
bmDeviceIP
OBJECT-TYPE
The IP address of the hardware battery monitor unit associated with this battery monitor.
1.3.6.1.4.1.3052.17.2.12.14.2.1.4IpAddressread-writecurrent
bmDeviceReadcom
OBJECT-TYPE
The SNMP read community of the hardware battery monitor unit associated with this battery monitor.
1.3.6.1.4.1.3052.17.2.12.14.2.1.5DisplayStringread-writecurrent
bmDeviceInputString
OBJECT-TYPE
Which string on the hardware battery monitor unit is associated with this battery monitor.
1.3.6.1.4.1.3052.17.2.12.14.2.1.6Integer32 (1..3)read-writecurrent
bmDeviceCTSize
OBJECT-TYPE
The rating of the DC current sensor, in amperes. If this value is set to 0, then string current will not be measured. This setting only pertains to the ES-BMU.
1.3.6.1.4.1.3052.17.2.12.14.2.1.7Integer32 (0..999)read-writecurrent
batteryMonitorTempTable
OBJECT-TYPE
This table organizes temperature battery monitor attributes.
1.3.6.1.4.1.3052.17.2.12.14.3not-accessiblecurrent
bmTempEntry
OBJECT-TYPE
Entry for battery monitor temperature config table.
1.3.6.1.4.1.3052.17.2.12.14.3.1not-accessiblecurrent
bmTempIndex
OBJECT-TYPE
Which battery monitor in the battery monitor temperature config table.
1.3.6.1.4.1.3052.17.2.12.14.3.1.1Integer32 (1..9)read-onlycurrent
bmTempEnable
OBJECT-TYPE
Enable/disable temperature event. This event is based on the average temperature of the jars in the string.
1.3.6.1.4.1.3052.17.2.12.14.3.1.2DisplayStringread-writecurrent
bmTempDeadband
OBJECT-TYPE
Deadband in degrees F or C, depending on scale setting of sensor referenced by bmGenDeviceES. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.14.3.1.3DisplayStringread-writecurrent
bmTempScale
OBJECT-TYPE
Temperature scale; this affects how temperature values are represented, and also how the temperature alarm thresholds and deadbands are interpreted.
1.3.6.1.4.1.3052.17.2.12.14.3.1.4DisplayStringread-writecurrent
bmTempHighValue
OBJECT-TYPE
Very high event threshold in degrees F or C, depending on scale setting referenced by bmGenDeviceES. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.14.3.1.5DisplayStringread-writecurrent
bmTempHighActions
OBJECT-TYPE
Actions for very high temperature event.
1.3.6.1.4.1.3052.17.2.12.14.3.1.6DisplayStringread-writecurrent
bmTempHighTrapNum
OBJECT-TYPE
Trap number for high temperature event.
1.3.6.1.4.1.3052.17.2.12.14.3.1.7Integer32 (530..1199)read-writecurrent
bmTempHighClass
OBJECT-TYPE
Class for high temperature event.
1.3.6.1.4.1.3052.17.2.12.14.3.1.8DisplayStringread-writecurrent
bmTempNormalActions
OBJECT-TYPE
Actions for return to normal temperature event.
1.3.6.1.4.1.3052.17.2.12.14.3.1.9DisplayStringread-writecurrent
bmTempNormalTrapNum
OBJECT-TYPE
Trap number for return to normal temperature event.
1.3.6.1.4.1.3052.17.2.12.14.3.1.10Integer32 (530..1199)read-writecurrent
bmTempNormalClass
OBJECT-TYPE
Class for return to normal temperature event.
1.3.6.1.4.1.3052.17.2.12.14.3.1.11DisplayStringread-writecurrent
bmTempLowValue
OBJECT-TYPE
Low event threshold in degrees F or C, depending on scale setting. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.14.3.1.12DisplayStringread-writecurrent
bmTempLowActions
OBJECT-TYPE
Actions for low temperature event.
1.3.6.1.4.1.3052.17.2.12.14.3.1.13DisplayStringread-writecurrent
bmTempLowTrapNum
OBJECT-TYPE
Trap number for low temperature event.
1.3.6.1.4.1.3052.17.2.12.14.3.1.14Integer32 (530..1199)read-writecurrent
bmTempLowClass
OBJECT-TYPE
Trap number for low temperature event.
1.3.6.1.4.1.3052.17.2.12.14.3.1.15DisplayStringread-writecurrent
bmTempSysrepEnable
OBJECT-TYPE
System reporting enable for temperature telemetry.
1.3.6.1.4.1.3052.17.2.12.14.3.1.16DisplayStringread-writecurrent
bmTempSysrepThreshold
OBJECT-TYPE
System reporting threshold for temperature telemetry. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.14.3.1.17DisplayStringread-writecurrent
bmTempSysrepLimit
OBJECT-TYPE
System reporting limit for temperature telemetry.
1.3.6.1.4.1.3052.17.2.12.14.3.1.18Integer32read-writecurrent
batteryMonitorDiffTempTable
OBJECT-TYPE
This table organizes differential temperature battery monitor attributes.
1.3.6.1.4.1.3052.17.2.12.14.4not-accessiblecurrent
bmDiffTempEntry
OBJECT-TYPE
Entry for battery monitor differential temperature config table.
1.3.6.1.4.1.3052.17.2.12.14.4.1not-accessiblecurrent
bmDiffTempIndex
OBJECT-TYPE
Which battery monitor in the battery monitor differential temperature config table.
1.3.6.1.4.1.3052.17.2.12.14.4.1.1Integer32 (1..9)read-onlycurrent
bmDiffTempEnable
OBJECT-TYPE
Enable/disable differential temperature event. This event is based on the differential between the average temperature of the batteries in the string, and ambient temperature (ambient - string temperature).
1.3.6.1.4.1.3052.17.2.12.14.4.1.2DisplayStringread-writecurrent
bmDiffTempDeadband
OBJECT-TYPE
Deadband in degrees F or C, depending on scale setting.
1.3.6.1.4.1.3052.17.2.12.14.4.1.3Integer32read-writecurrent
bmDiffTempVHighValue
OBJECT-TYPE
Very high event threshold in degrees F or C, depending on scale setting.
1.3.6.1.4.1.3052.17.2.12.14.4.1.4Integer32read-writecurrent
bmDiffTempVHighActions
OBJECT-TYPE
Actions for very high differential temperature event.
1.3.6.1.4.1.3052.17.2.12.14.4.1.5DisplayStringread-writecurrent
bmDiffTempVHighTrapNum
OBJECT-TYPE
Trap number for very high differential temperature event.
1.3.6.1.4.1.3052.17.2.12.14.4.1.6Integer32read-writecurrent
bmDiffTempVHighClass
OBJECT-TYPE
Class for very high differential temperature event.
1.3.6.1.4.1.3052.17.2.12.14.4.1.7DisplayStringread-writecurrent
bmDiffTempHighValue
OBJECT-TYPE
High event threshold in degrees F or C, depending on scale setting.
1.3.6.1.4.1.3052.17.2.12.14.4.1.8Integer32read-writecurrent
bmDiffTempHighActions
OBJECT-TYPE
Actions for high differential temperature event.
1.3.6.1.4.1.3052.17.2.12.14.4.1.9DisplayStringread-writecurrent
bmDiffTempHighTrapNum
OBJECT-TYPE
Trap number for high differential temperature event.
1.3.6.1.4.1.3052.17.2.12.14.4.1.10Integer32read-writecurrent
bmDiffTempHighClass
OBJECT-TYPE
Class for high differential temperature event.
1.3.6.1.4.1.3052.17.2.12.14.4.1.11DisplayStringread-writecurrent
bmDiffTempNormalActions
OBJECT-TYPE
Actions for return to normal differential temperature event.
1.3.6.1.4.1.3052.17.2.12.14.4.1.12DisplayStringread-writecurrent
bmDiffTempNormalTrapNum
OBJECT-TYPE
Trap number for return to normal differential temperature event.
1.3.6.1.4.1.3052.17.2.12.14.4.1.13Integer32read-writecurrent
bmDiffTempNormalClass
OBJECT-TYPE
Class for return to normal differential temperature event.
1.3.6.1.4.1.3052.17.2.12.14.4.1.14DisplayStringread-writecurrent
bmDiffTempSysrepEnable
OBJECT-TYPE
System reporting enable for differential temperature telemetry.
1.3.6.1.4.1.3052.17.2.12.14.4.1.15DisplayStringread-writecurrent
bmDiffTempSysrepThreshold
OBJECT-TYPE
System reporting threshold for differential temperature telemetry.
1.3.6.1.4.1.3052.17.2.12.14.4.1.16Integer32read-writecurrent
bmDiffTempSysrepLimit
OBJECT-TYPE
System reporting limit for differential temperature telemetry.
1.3.6.1.4.1.3052.17.2.12.14.4.1.17Integer32read-writecurrent
batteryMonitorVoltageTable
OBJECT-TYPE
This table organizes battery monitor voltage attributes.
1.3.6.1.4.1.3052.17.2.12.14.5not-accessiblecurrent
bmVoltageEntry
OBJECT-TYPE
Entry for battery monitor voltage config table.
1.3.6.1.4.1.3052.17.2.12.14.5.1not-accessiblecurrent
bmVoltageIndex
OBJECT-TYPE
Which battery monitor in the battery monitor voltage config table.
1.3.6.1.4.1.3052.17.2.12.14.5.1.1Integer32 (1..9)read-onlycurrent
bmVoltageEnable
OBJECT-TYPE
Enable/disable voltage event. This event is based on the total voltage output of the batteries in the string.
1.3.6.1.4.1.3052.17.2.12.14.5.1.2DisplayStringread-writecurrent
bmVoltageDeadband
OBJECT-TYPE
Deadband in volts. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.14.5.1.3DisplayStringread-writecurrent
bmVoltageVHighValue
OBJECT-TYPE
Very high event threshold, in volts. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.14.5.1.4DisplayStringread-writecurrent
bmVoltageVHighActions
OBJECT-TYPE
Actions for very high voltage event.
1.3.6.1.4.1.3052.17.2.12.14.5.1.5DisplayStringread-writecurrent
bmVoltageVHighTrapNum
OBJECT-TYPE
Trap number for very high voltage event.
1.3.6.1.4.1.3052.17.2.12.14.5.1.6Integer32read-writecurrent
bmVoltageVHighClass
OBJECT-TYPE
Class for very high voltage event.
1.3.6.1.4.1.3052.17.2.12.14.5.1.7DisplayStringread-writecurrent
bmVoltageHighValue
OBJECT-TYPE
High event threshold, in volts. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.14.5.1.8DisplayStringread-writecurrent
bmVoltageHighActions
OBJECT-TYPE
Actions for high voltage event.
1.3.6.1.4.1.3052.17.2.12.14.5.1.9DisplayStringread-writecurrent
bmVoltageHighTrapNum
OBJECT-TYPE
Trap number for high voltage event.
1.3.6.1.4.1.3052.17.2.12.14.5.1.10Integer32read-writecurrent
bmVoltageHighClass
OBJECT-TYPE
Class for high voltage event.
1.3.6.1.4.1.3052.17.2.12.14.5.1.11DisplayStringread-writecurrent
bmVoltageNormalActions
OBJECT-TYPE
Actions for return to normal voltage event.
1.3.6.1.4.1.3052.17.2.12.14.5.1.12DisplayStringread-writecurrent
bmVoltageNormalTrapNum
OBJECT-TYPE
Trap number for return to normal voltage event.
1.3.6.1.4.1.3052.17.2.12.14.5.1.13Integer32read-writecurrent
bmVoltageNormalClass
OBJECT-TYPE
Class for return to normal voltage event.
1.3.6.1.4.1.3052.17.2.12.14.5.1.14DisplayStringread-writecurrent
bmVoltageLowValue
OBJECT-TYPE
Low event threshold, in volts. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.14.5.1.15DisplayStringread-writecurrent
bmVoltageLowActions
OBJECT-TYPE
Actions for low voltage event.
1.3.6.1.4.1.3052.17.2.12.14.5.1.16DisplayStringread-writecurrent
bmVoltageLowTrapNum
OBJECT-TYPE
Trap number for low voltage event.
1.3.6.1.4.1.3052.17.2.12.14.5.1.17Integer32read-writecurrent
bmVoltageLowClass
OBJECT-TYPE
Class for low voltage event.
1.3.6.1.4.1.3052.17.2.12.14.5.1.18DisplayStringread-writecurrent
bmVoltageVLowValue
OBJECT-TYPE
Very Low event threshold, in volts. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.14.5.1.19DisplayStringread-writecurrent
bmVoltageVLowActions
OBJECT-TYPE
Actions for very low voltage event.
1.3.6.1.4.1.3052.17.2.12.14.5.1.20DisplayStringread-writecurrent
bmVoltageVLowTrapNum
OBJECT-TYPE
Trap number for very low voltage event.
1.3.6.1.4.1.3052.17.2.12.14.5.1.21Integer32read-writecurrent
bmVoltageVLowClass
OBJECT-TYPE
Class for very low voltage event.
1.3.6.1.4.1.3052.17.2.12.14.5.1.22DisplayStringread-writecurrent
bmVoltageSysrepEnable
OBJECT-TYPE
System reporting enable for voltage telemetry.
1.3.6.1.4.1.3052.17.2.12.14.5.1.23DisplayStringread-writecurrent
bmVoltageSysrepThreshold
OBJECT-TYPE
System reporting threshold for voltage telemetry. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.14.5.1.24DisplayStringread-writecurrent
bmVoltageSysrepLimit
OBJECT-TYPE
System reporting limit for voltage telemetry.
1.3.6.1.4.1.3052.17.2.12.14.5.1.25Integer32read-writecurrent
batteryMonitorDiffVoltTable
OBJECT-TYPE
This table organizes differential voltage battery monitor attributes.
1.3.6.1.4.1.3052.17.2.12.14.6not-accessiblecurrent
bmDiffVoltEntry
OBJECT-TYPE
Entry for battery monitor differential voltage config table.
1.3.6.1.4.1.3052.17.2.12.14.6.1not-accessiblecurrent
bmDiffVoltIndex
OBJECT-TYPE
Which battery monitor in the battery monitor differential voltage config table.
1.3.6.1.4.1.3052.17.2.12.14.6.1.1Integer32 (1..9)read-onlycurrent
bmDiffVoltEnable
OBJECT-TYPE
Enable/disable differential voltage event. This event is based on the differential between the highest and lowest jar voltages within the string.
1.3.6.1.4.1.3052.17.2.12.14.6.1.2DisplayStringread-writecurrent
bmDiffVoltDeadband
OBJECT-TYPE
Deadband in volts.
1.3.6.1.4.1.3052.17.2.12.14.6.1.3DisplayStringread-writecurrent
bmDiffVoltVHighValue
OBJECT-TYPE
Very high event threshold in volts. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.14.6.1.4DisplayStringread-writecurrent
bmDiffVoltVHighActions
OBJECT-TYPE
Actions for very high differential voltage event.
1.3.6.1.4.1.3052.17.2.12.14.6.1.5DisplayStringread-writecurrent
bmDiffVoltVHighTrapNum
OBJECT-TYPE
Trap number for very high differential voltage event.
1.3.6.1.4.1.3052.17.2.12.14.6.1.6Integer32read-writecurrent
bmDiffVoltVHighClass
OBJECT-TYPE
Class for very high differential voltage event.
1.3.6.1.4.1.3052.17.2.12.14.6.1.7DisplayStringread-writecurrent
bmDiffVoltHighValue
OBJECT-TYPE
High event threshold in volts. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.14.6.1.8DisplayStringread-writecurrent
bmDiffVoltHighActions
OBJECT-TYPE
Actions for high differential voltage event.
1.3.6.1.4.1.3052.17.2.12.14.6.1.9DisplayStringread-writecurrent
bmDiffVoltHighTrapNum
OBJECT-TYPE
Trap number for high differential voltage event.
1.3.6.1.4.1.3052.17.2.12.14.6.1.10Integer32read-writecurrent
bmDiffVoltHighClass
OBJECT-TYPE
Class for high differential voltage event.
1.3.6.1.4.1.3052.17.2.12.14.6.1.11DisplayStringread-writecurrent
bmDiffVoltNormalActions
OBJECT-TYPE
Actions for return to normal differential voltage event.
1.3.6.1.4.1.3052.17.2.12.14.6.1.12DisplayStringread-writecurrent
bmDiffVoltNormalTrapNum
OBJECT-TYPE
Trap number for return to normal differential voltage event.
1.3.6.1.4.1.3052.17.2.12.14.6.1.13Integer32read-writecurrent
bmDiffVoltNormalClass
OBJECT-TYPE
Class for return to normal differential voltage event.
1.3.6.1.4.1.3052.17.2.12.14.6.1.14DisplayStringread-writecurrent
bmDiffVoltSysrepEnable
OBJECT-TYPE
System reporting enable for differential voltage telemetry.
1.3.6.1.4.1.3052.17.2.12.14.6.1.15DisplayStringread-writecurrent
bmDiffVoltSysrepThreshold
OBJECT-TYPE
System reporting threshold for differential voltage telemetry.
1.3.6.1.4.1.3052.17.2.12.14.6.1.16DisplayStringread-writecurrent
bmDiffVoltSysrepLimit
OBJECT-TYPE
System reporting limit for differential voltage telemetry.
1.3.6.1.4.1.3052.17.2.12.14.6.1.17Integer32read-writecurrent
batteryMonitorChargingCurrentTable
OBJECT-TYPE
This table organizes battery monitor charging current attributes.
1.3.6.1.4.1.3052.17.2.12.14.7not-accessiblecurrent
bmChargingCurrentEntry
OBJECT-TYPE
Entry for battery monitor differential charging current config table.
1.3.6.1.4.1.3052.17.2.12.14.7.1not-accessiblecurrent
bmChargingCurrentIndex
OBJECT-TYPE
Which battery monitor in the battery monitor charging current config table.
1.3.6.1.4.1.3052.17.2.12.14.7.1.1Integer32 (1..9)read-onlycurrent
bmChargingCurrentEnable
OBJECT-TYPE
Enable/disable charging current event. This event is based on positive current flow (i.e. current flowing into the battery string).
1.3.6.1.4.1.3052.17.2.12.14.7.1.2DisplayStringread-writecurrent
bmChargingCurrentDeadband
OBJECT-TYPE
Deadband in amperes. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.14.7.1.3DisplayStringread-writecurrent
bmChargingCurrentVHighValue
OBJECT-TYPE
Very high event threshold, in volts. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.14.7.1.4DisplayStringread-writecurrent
bmChargingCurrentVHighActions
OBJECT-TYPE
Actions for very high charging current event.
1.3.6.1.4.1.3052.17.2.12.14.7.1.5DisplayStringread-writecurrent
bmChargingCurrentVHighTrapNum
OBJECT-TYPE
Trap number for very high charging current event.
1.3.6.1.4.1.3052.17.2.12.14.7.1.6Integer32read-writecurrent
bmChargingCurrentVHighClass
OBJECT-TYPE
Class for very high charging current event.
1.3.6.1.4.1.3052.17.2.12.14.7.1.7DisplayStringread-writecurrent
bmChargingCurrentHighValue
OBJECT-TYPE
High event threshold, in volts. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.14.7.1.8DisplayStringread-writecurrent
bmChargingCurrentHighActions
OBJECT-TYPE
Actions for high charging current event.
1.3.6.1.4.1.3052.17.2.12.14.7.1.9DisplayStringread-writecurrent
bmChargingCurrentHighTrapNum
OBJECT-TYPE
Trap number for high charging current event.
1.3.6.1.4.1.3052.17.2.12.14.7.1.10Integer32read-writecurrent
bmChargingCurrentHighClass
OBJECT-TYPE
Class for high charging current event.
1.3.6.1.4.1.3052.17.2.12.14.7.1.11DisplayStringread-writecurrent
bmChargingCurrentNormalActions
OBJECT-TYPE
Actions for return to normal charging current event.
1.3.6.1.4.1.3052.17.2.12.14.7.1.12DisplayStringread-writecurrent
bmChargingCurrentNormalTrapNum
OBJECT-TYPE
Trap number for return to normal charging current event.
1.3.6.1.4.1.3052.17.2.12.14.7.1.13Integer32read-writecurrent
bmChargingCurrentNormalClass
OBJECT-TYPE
Class for return to normal charging current event.
1.3.6.1.4.1.3052.17.2.12.14.7.1.14DisplayStringread-writecurrent
bmChargingCurrentSysrepEnable
OBJECT-TYPE
System reporting enable for charging current telemetry.
1.3.6.1.4.1.3052.17.2.12.14.7.1.15DisplayStringread-writecurrent
bmChargingCurrentSysrepThreshold
OBJECT-TYPE
System reporting threshold for charging current telemetry. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.14.7.1.16DisplayStringread-writecurrent
bmChargingCurrentSysrepLimit
OBJECT-TYPE
System reporting limit for charging current telemetry.
1.3.6.1.4.1.3052.17.2.12.14.7.1.17Integer32read-writecurrent
batteryMonitorDischargingCurrentTable
OBJECT-TYPE
This table organizes battery monitor discharging current attributes.
1.3.6.1.4.1.3052.17.2.12.14.8not-accessiblecurrent
bmDischargingCurrentEntry
OBJECT-TYPE
Entry for battery monitor differential discharging current config table.
1.3.6.1.4.1.3052.17.2.12.14.8.1not-accessiblecurrent
bmDischargingCurrentIndex
OBJECT-TYPE
Which battery monitor in the battery monitor discharging current config table.
1.3.6.1.4.1.3052.17.2.12.14.8.1.1Integer32 (1..9)read-onlycurrent
bmDischargingCurrentEnable
OBJECT-TYPE
Enable/disable discharging current event. This event is based on positive current flow (i.e. current flowing into the battery string).
1.3.6.1.4.1.3052.17.2.12.14.8.1.2DisplayStringread-writecurrent
bmDischargingCurrentDeadband
OBJECT-TYPE
Deadband in amperes. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.14.8.1.3DisplayStringread-writecurrent
bmDischargingCurrentVHighValue
OBJECT-TYPE
Very high event threshold, in volts. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.14.8.1.4DisplayStringread-writecurrent
bmDischargingCurrentVHighActions
OBJECT-TYPE
Actions for very high discharging current event.
1.3.6.1.4.1.3052.17.2.12.14.8.1.5DisplayStringread-writecurrent
bmDischargingCurrentVHighTrapNum
OBJECT-TYPE
Trap number for very high discharging current event.
1.3.6.1.4.1.3052.17.2.12.14.8.1.6Integer32read-writecurrent
bmDischargingCurrentVHighClass
OBJECT-TYPE
Class for very high discharging current event.
1.3.6.1.4.1.3052.17.2.12.14.8.1.7DisplayStringread-writecurrent
bmDischargingCurrentHighValue
OBJECT-TYPE
High event threshold, in volts. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.14.8.1.8DisplayStringread-writecurrent
bmDischargingCurrentHighActions
OBJECT-TYPE
Actions for high discharging current event.
1.3.6.1.4.1.3052.17.2.12.14.8.1.9DisplayStringread-writecurrent
bmDischargingCurrentHighTrapNum
OBJECT-TYPE
Trap number for high discharging current event.
1.3.6.1.4.1.3052.17.2.12.14.8.1.10Integer32read-writecurrent
bmDischargingCurrentHighClass
OBJECT-TYPE
Class for high discharging current event.
1.3.6.1.4.1.3052.17.2.12.14.8.1.11DisplayStringread-writecurrent
bmDischargingCurrentNormalActions
OBJECT-TYPE
Actions for return to normal discharging current event.
1.3.6.1.4.1.3052.17.2.12.14.8.1.12DisplayStringread-writecurrent
bmDischargingCurrentNormalTrapNum
OBJECT-TYPE
Trap number for return to normal discharging current event.
1.3.6.1.4.1.3052.17.2.12.14.8.1.13Integer32read-writecurrent
bmDischargingCurrentNormalClass
OBJECT-TYPE
Class for return to normal discharging current event.
1.3.6.1.4.1.3052.17.2.12.14.8.1.14DisplayStringread-writecurrent
bmDischargingCurrentSysrepEnable
OBJECT-TYPE
System reporting enable for discharging current telemetry.
1.3.6.1.4.1.3052.17.2.12.14.8.1.15DisplayStringread-writecurrent
bmDischargingCurrentSysrepThreshold
OBJECT-TYPE
System reporting threshold for discharging current telemetry. This is a floating point value.
1.3.6.1.4.1.3052.17.2.12.14.8.1.16DisplayStringread-writecurrent
bmDischargingCurrentSysrepLimit
OBJECT-TYPE
System reporting limit for discharging current telemetry.
1.3.6.1.4.1.3052.17.2.12.14.8.1.17Integer32read-writecurrent
batteryMonitorChargeLevelTable
OBJECT-TYPE
This table organizes battery monitor charge level attributes.
1.3.6.1.4.1.3052.17.2.12.14.9not-accessiblecurrent
bmChargeLevelEntry
OBJECT-TYPE
Entry for battery monitor charge level config table.
1.3.6.1.4.1.3052.17.2.12.14.9.1not-accessiblecurrent
bmChargeLevelIndex
OBJECT-TYPE
Which battery monitor in the battery monitor charge level config table.
1.3.6.1.4.1.3052.17.2.12.14.9.1.1Integer32 (1..9)read-onlycurrent
bmChargeLevelEnable
OBJECT-TYPE
Enable/disable charge level event.
1.3.6.1.4.1.3052.17.2.12.14.9.1.2DisplayStringread-writecurrent
bmChargeLevelNormalActions
OBJECT-TYPE
Actions for return to normal charge level event.
1.3.6.1.4.1.3052.17.2.12.14.9.1.3DisplayStringread-writecurrent
bmChargeLevelNormalTrapNum
OBJECT-TYPE
Trap number for return to normal charge level event.
1.3.6.1.4.1.3052.17.2.12.14.9.1.4Integer32read-writecurrent
bmChargeLevelNormalClass
OBJECT-TYPE
Class for return to normal charge level event.
1.3.6.1.4.1.3052.17.2.12.14.9.1.5DisplayStringread-writecurrent
bmChargeLevelLowActions
OBJECT-TYPE
Actions for low charge level event.
1.3.6.1.4.1.3052.17.2.12.14.9.1.6DisplayStringread-writecurrent
bmChargeLevelLowTrapNum
OBJECT-TYPE
Trap number for low charge level event.
1.3.6.1.4.1.3052.17.2.12.14.9.1.7Integer32read-writecurrent
bmChargeLevelLowClass
OBJECT-TYPE
Class for low charge level event.
1.3.6.1.4.1.3052.17.2.12.14.9.1.8DisplayStringread-writecurrent
bmChargeLevelVLowActions
OBJECT-TYPE
Actions for very low charge level event.
1.3.6.1.4.1.3052.17.2.12.14.9.1.9DisplayStringread-writecurrent
bmChargeLevelVLowTrapNum
OBJECT-TYPE
Trap number for very low charge level event.
1.3.6.1.4.1.3052.17.2.12.14.9.1.10Integer32read-writecurrent
bmChargeLevelVLowClass
OBJECT-TYPE
Class for very low charge level event.
1.3.6.1.4.1.3052.17.2.12.14.9.1.11DisplayStringread-writecurrent
bmChargeLevelSysrepEnable
OBJECT-TYPE
System reporting enable for charge level telemetry.
1.3.6.1.4.1.3052.17.2.12.14.9.1.12DisplayStringread-writecurrent
batteryMonitorJarHealthTable
OBJECT-TYPE
This table organizes battery monitor jar health attributes.
1.3.6.1.4.1.3052.17.2.12.14.10not-accessiblecurrent
bmJarHealthEntry
OBJECT-TYPE
Entry for battery monitor jar health config table.
1.3.6.1.4.1.3052.17.2.12.14.10.1not-accessiblecurrent
bmJarHealthIndex
OBJECT-TYPE
Which battery monitor in the battery monitor jar health config table.
1.3.6.1.4.1.3052.17.2.12.14.10.1.1Integer32 (1..9)read-onlycurrent
bmJarHealthEnable
OBJECT-TYPE
Enable/disable jar health event.
1.3.6.1.4.1.3052.17.2.12.14.10.1.2DisplayStringread-writecurrent
bmJarHealthNormalActions
OBJECT-TYPE
Actions for return to normal jar health event.
1.3.6.1.4.1.3052.17.2.12.14.10.1.3DisplayStringread-writecurrent
bmJarHealthNormalTrapNum
OBJECT-TYPE
Trap number for return to normal jar health event.
1.3.6.1.4.1.3052.17.2.12.14.10.1.4Integer32read-writecurrent
bmJarHealthNormalClass
OBJECT-TYPE
Class for return to normal jar health event.
1.3.6.1.4.1.3052.17.2.12.14.10.1.5DisplayStringread-writecurrent
bmJarHealthLowActions
OBJECT-TYPE
Actions for low jar health event.
1.3.6.1.4.1.3052.17.2.12.14.10.1.6DisplayStringread-writecurrent
bmJarHealthLowTrapNum
OBJECT-TYPE
Trap number for low jar health event.
1.3.6.1.4.1.3052.17.2.12.14.10.1.7Integer32read-writecurrent
bmJarHealthLowClass
OBJECT-TYPE
Class for low jar health event.
1.3.6.1.4.1.3052.17.2.12.14.10.1.8DisplayStringread-writecurrent
bmJarHealthVLowActions
OBJECT-TYPE
Actions for very low jar health event.
1.3.6.1.4.1.3052.17.2.12.14.10.1.9DisplayStringread-writecurrent
bmJarHealthVLowTrapNum
OBJECT-TYPE
Trap number for very low jar health event.
1.3.6.1.4.1.3052.17.2.12.14.10.1.10Integer32read-writecurrent
bmJarHealthVLowClass
OBJECT-TYPE
Class for very low jar health event.
1.3.6.1.4.1.3052.17.2.12.14.10.1.11DisplayStringread-writecurrent
bmJarHealthSysrepEnable
OBJECT-TYPE
System reporting enable for jar health telemetry.
1.3.6.1.4.1.3052.17.2.12.14.10.1.12DisplayStringread-writecurrent
evReset
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.12.16
evResetEnable
OBJECT-TYPE
Enable/disable reset event. This event is triggered when the unit finishes booting.
1.3.6.1.4.1.3052.17.2.12.16.1DisplayStringread-writecurrent
evResetDelay
OBJECT-TYPE
Number of seconds to wait after unit finishes booting before triggering the reset event.
1.3.6.1.4.1.3052.17.2.12.16.2Integer32 (0..3600)read-writecurrent
evResetActions
OBJECT-TYPE
Actions for reset event.
1.3.6.1.4.1.3052.17.2.12.16.3DisplayStringread-writecurrent
evResetMessage
OBJECT-TYPE
Message for reset event.
1.3.6.1.4.1.3052.17.2.12.16.4DisplayStringread-writecurrent
evResetTrapnum
OBJECT-TYPE
Trap number for reset event.
1.3.6.1.4.1.3052.17.2.12.16.5Integer32 (543..1199)read-writecurrent
evResetClass
OBJECT-TYPE
Class (severity) for reset event.
1.3.6.1.4.1.3052.17.2.12.16.6DisplayStringread-writecurrent
evGlobal
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.12.18
evGlobalActions
OBJECT-TYPE
Global event actions.
1.3.6.1.4.1.3052.17.2.12.18.2DisplayStringread-writecurrent
evGlobalTrapnum
OBJECT-TYPE
Global trap number.
1.3.6.1.4.1.3052.17.2.12.18.3Integer32 (0..1199)read-writecurrent
action
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.14
actionSched
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.14.3
actionSchedEnable
OBJECT-TYPE
ON/OFF enable action schedule
1.3.6.1.4.1.3052.17.2.14.3.1DisplayStringread-writecurrent
actionSchedBegin
OBJECT-TYPE
action schedule begin time (HH:MM)
1.3.6.1.4.1.3052.17.2.14.3.2DisplayStringread-writecurrent
actionSchedEnd
OBJECT-TYPE
action schedule end time (HH:MM)
1.3.6.1.4.1.3052.17.2.14.3.3DisplayStringread-writecurrent
actionSchedWeekdaysOnly
OBJECT-TYPE
ON/OFF whether the action schedule applies to weekdays only (ON) or all days (OFF)
1.3.6.1.4.1.3052.17.2.14.3.4DisplayStringread-writecurrent
actionAsentria
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.14.4
actionAsentriaRequireAck
OBJECT-TYPE
ON/OFF Asentria action requires an ack from the receiver
1.3.6.1.4.1.3052.17.2.14.4.1DisplayStringread-writecurrent
actionAsentriaVersion
OBJECT-TYPE
version 1.0 or 1.1
1.3.6.1.4.1.3052.17.2.14.4.2DisplayStringread-writecurrent
actionAsentriaTCPPort
OBJECT-TYPE
TCP port used for TCP-based Asentria alarms
1.3.6.1.4.1.3052.17.2.14.4.3Integer32read-writecurrent
actionHostTable
OBJECT-TYPE
Table of network hosts to use for network-based actions
1.3.6.1.4.1.3052.17.2.14.6not-accessiblecurrent
actionHostEntry
OBJECT-TYPE
Entry for table of network hosts to use for network-based actions
1.3.6.1.4.1.3052.17.2.14.6.1not-accessiblecurrent
actionHostIndex
OBJECT-TYPE
Index for table of network hosts to use for network-based actions
1.3.6.1.4.1.3052.17.2.14.6.1.1Integer32 (1..6)read-onlycurrent
actionHost
OBJECT-TYPE
Hostname/IP address used as destination for network-based action (e.g., trap)
1.3.6.1.4.1.3052.17.2.14.6.1.2DisplayStringread-writecurrent
actionEmailTable
OBJECT-TYPE
Table of email addresses to use for email actions
1.3.6.1.4.1.3052.17.2.14.7not-accessiblecurrent
actionEmailEntry
OBJECT-TYPE
Entry for table of email addresses to use for email actions
1.3.6.1.4.1.3052.17.2.14.7.1not-accessiblecurrent
actionEmailIndex
OBJECT-TYPE
Index for table of email addresses to use for email actions
1.3.6.1.4.1.3052.17.2.14.7.1.1Integer32 (1..6)read-onlycurrent
actionEmail
OBJECT-TYPE
email address
1.3.6.1.4.1.3052.17.2.14.7.1.2DisplayStringread-writecurrent
actionParseError
OBJECT-TYPE
When a user attempts to configure an invalid action setting/ object, this object says why it was invalid.
1.3.6.1.4.1.3052.17.2.14.8DisplayStringread-onlycurrent
sys
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.16
sysTime
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.16.1
sysTimeAutoDST
OBJECT-TYPE
ON/OFF automatically adjust for Daylight Savings Time
1.3.6.1.4.1.3052.17.2.16.1.1DisplayStringread-writecurrent
sysTimeGMTOffset
OBJECT-TYPE
Absolute value of offset (hours) from GMT of the timezone
1.3.6.1.4.1.3052.17.2.16.1.2Integer32read-writecurrent
sysTimeGMTDirection
OBJECT-TYPE
Direction (AHEAD/BEHIND) of timezone relative to GMT
1.3.6.1.4.1.3052.17.2.16.1.3DisplayStringread-writecurrent
sysTimeNet
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.16.1.4
sysTimeNetEnable
OBJECT-TYPE
Network time mode
1.3.6.1.4.1.3052.17.2.16.1.4.1DisplayStringread-writecurrent
sysTimeNetHostTable
OBJECT-TYPE
Table of hosts to use for network time services
1.3.6.1.4.1.3052.17.2.16.1.4.2not-accessiblecurrent
sysTimeNetHostEntry
OBJECT-TYPE
Entry for table of hosts to use for network time services
1.3.6.1.4.1.3052.17.2.16.1.4.2.1not-accessiblecurrent
sysTimeNetHostIndex
OBJECT-TYPE
Index for table of hosts to use for network time services
1.3.6.1.4.1.3052.17.2.16.1.4.2.1.1Integer32 (1..6)read-onlycurrent
sysTimeNetHost
OBJECT-TYPE
host to use for network time services
1.3.6.1.4.1.3052.17.2.16.1.4.2.1.2DisplayStringread-writecurrent
sysPT
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.16.2
sysPTTimeout
OBJECT-TYPE
Timeout (minutes) of inactivity after which a pass-through session is terminated (0 means it never terminates)
1.3.6.1.4.1.3052.17.2.16.2.1Integer32read-writecurrent
sysPTEndPause
OBJECT-TYPE
number of 16ths of a second between escape characters received on pass-through origin IO handle that are reuired for the escape characters to register as pass-through escape characters in the pass-through escape sequence. Set to 0 to make the escape character register as part of the pass- through escape sequence without requiring a pause.
1.3.6.1.4.1.3052.17.2.16.2.2Integer32read-writecurrent
sysMTU
OBJECT-TYPE
Maximum transfer unit for ethernet interfaces
1.3.6.1.4.1.3052.17.2.16.3Integer32read-writecurrent
sysAnswerString
OBJECT-TYPE
String displayed upon login
1.3.6.1.4.1.3052.17.2.16.4DisplayStringread-writecurrent
sysEventFileID
OBJECT-TYPE
ID string for events file
1.3.6.1.4.1.3052.17.2.16.6DisplayStringread-writecurrent
sysEscapeCharacter
OBJECT-TYPE
Decimal ASCII code of the system escape character
1.3.6.1.4.1.3052.17.2.16.7Integer32read-writecurrent
sysTimeStamp
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.16.8
sysTimeStampTimeFormat
OBJECT-TYPE
Format of time stamp: HH:MM,HH:MM:SS,BLANK
1.3.6.1.4.1.3052.17.2.16.8.1DisplayStringread-writecurrent
sysTimeStampDateFormat
OBJECT-TYPE
Format of date stamp: MM/DD,MM/DD/YY,MM/DD/YYYY,BLANK
1.3.6.1.4.1.3052.17.2.16.8.2DisplayStringread-writecurrent
sysTimeStampSpaceAfter
OBJECT-TYPE
ON/OFF Inlude a space after timestamp
1.3.6.1.4.1.3052.17.2.16.8.3DisplayStringread-writecurrent
sysLog
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.16.9
sysLogMode
OBJECT-TYPE
Syslog mode: disabled, emit UDP (REMOTE), save in a rotating file set (FILE), or emit on a listening socket (SERVER)
1.3.6.1.4.1.3052.17.2.16.9.1DisplayStringread-writecurrent
sysLoghost
OBJECT-TYPE
Syslog host: destination machine when syslog mode is REMOTE
1.3.6.1.4.1.3052.17.2.16.9.2DisplayStringread-writecurrent
sysLogFilter
OBJECT-TYPE
String describing what functions place data in the syslog
1.3.6.1.4.1.3052.17.2.16.9.3DisplayStringread-writecurrent
sysLogFileSize
OBJECT-TYPE
Size (in KB) of syslog files (when syslog mode is SERVER or FILE)
1.3.6.1.4.1.3052.17.2.16.9.4Integer32read-writecurrent
sysLogFileCount
OBJECT-TYPE
Number of files in syslog file set (when syslog mode is SERVER or FILE)
1.3.6.1.4.1.3052.17.2.16.9.5Integer32read-writecurrent
sysLogListenPort
OBJECT-TYPE
TCP port on which the unit listens for a connection on which syslog data is dumped (when syslog mode is SERVER)
1.3.6.1.4.1.3052.17.2.16.9.6Integer32read-writecurrent
sysCRDB
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.16.10
sysCRDBCapacity
OBJECT-TYPE
Capacity of Call Record Database (in KB)
1.3.6.1.4.1.3052.17.2.16.10.1Integer32read-onlycurrent
sysCRDBPercentFull
OBJECT-TYPE
Percent of the CRDB used
1.3.6.1.4.1.3052.17.2.16.10.2Integer32read-onlycurrent
sysCRDBFileIDTable
OBJECT-TYPE
Table of CRDB file IDs
1.3.6.1.4.1.3052.17.2.16.10.3not-accessiblecurrent
sysCRDBFileIDEntry
OBJECT-TYPE
Entry for table of CRDB file IDs
1.3.6.1.4.1.3052.17.2.16.10.3.1not-accessiblecurrent
sysCRDBFileIDIndex
OBJECT-TYPE
Index for table of CRDB file IDs
1.3.6.1.4.1.3052.17.2.16.10.3.1.1Integer32 (1..16)read-onlycurrent
sysCRDBFileID
OBJECT-TYPE
ID of CRDB file for this port-associated file x
1.3.6.1.4.1.3052.17.2.16.10.3.1.2DisplayStringread-writecurrent
sysCRDBFileEnforceMinTable
OBJECT-TYPE
Table of CRDB file minimum size enforcement settings
1.3.6.1.4.1.3052.17.2.16.10.4not-accessiblecurrent
sysCRDBFileEnforceMinEntry
OBJECT-TYPE
Entry for table of CRDB file minimum size enforcement settings
1.3.6.1.4.1.3052.17.2.16.10.4.1not-accessiblecurrent
sysCRDBFileEnforceMinIndex
OBJECT-TYPE
Index for table of CRDB file minimum size enforcement settings
1.3.6.1.4.1.3052.17.2.16.10.4.1.1Integer32 (1..24)read-onlycurrent
sysCRDBFileEnforceMin
OBJECT-TYPE
ON/OFF: enforce minimum size for this CRDB file x
1.3.6.1.4.1.3052.17.2.16.10.4.1.2DisplayStringread-writecurrent
sysCharMask
OBJECT-TYPE
Character mask used for ignoring certain characters on serial ports when assembling data records (when port mode is ASCII)
1.3.6.1.4.1.3052.17.2.16.11OCTET STRINGread-writecurrent
sysPrompt
OBJECT-TYPE
Prompt to use in a commnand session
1.3.6.1.4.1.3052.17.2.16.12DisplayStringread-writecurrent
sysBootStatus
OBJECT-TYPE
String describing the boot status of the unit (Booted OK/ still booting
1.3.6.1.4.1.3052.17.2.16.13DisplayStringread-onlycurrent
sysLoc
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.16.14
sysLocLatitude
OBJECT-TYPE
Latitude portion of geographic coordinates as string
1.3.6.1.4.1.3052.17.2.16.14.1DisplayStringread-writecurrent
sysLocLongitude
OBJECT-TYPE
Longitude portion of geographic coordinates as string
1.3.6.1.4.1.3052.17.2.16.14.2DisplayStringread-writecurrent
sysLocXOffset
OBJECT-TYPE
X-offset portion of geographic coordinates as string
1.3.6.1.4.1.3052.17.2.16.14.3DisplayStringread-writecurrent
sysLocYOffset
OBJECT-TYPE
Y offset portion of geographic coordinates as string
1.3.6.1.4.1.3052.17.2.16.14.4DisplayStringread-writecurrent
sysLocAngle
OBJECT-TYPE
Angle portion of geographic coordinates as string
1.3.6.1.4.1.3052.17.2.16.14.5DisplayStringread-writecurrent
sysLocAltitude
OBJECT-TYPE
Altitude as string
1.3.6.1.4.1.3052.17.2.16.14.6DisplayStringread-writecurrent
sysFileTransfer
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.16.17
sysFileTransferStatus
OBJECT-TYPE
Start/cancel file transfer, or check transfer status. To start, set this object to 'start'. To cancel, set this object to 'cancel'. To check status, get the object
1.3.6.1.4.1.3052.17.2.16.17.1DisplayStringread-writecurrent
sysFileTransferURL
OBJECT-TYPE
URL (describing protocol, host, directory, and file) on which file transfer function operates.
1.3.6.1.4.1.3052.17.2.16.17.2DisplayStringread-writecurrent
sysFileTransferUsername
OBJECT-TYPE
Username for user account at the resource specified by sysFileTransferURL.
1.3.6.1.4.1.3052.17.2.16.17.3DisplayStringread-writecurrent
sysFileTransferPassword
OBJECT-TYPE
Password for user account at the resource specified by sysFileTransferURL.
1.3.6.1.4.1.3052.17.2.16.17.4DisplayStringread-writecurrent
sysUpdate
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.16.18
sysUpdateStatus
OBJECT-TYPE
Check time/result of last update attempt.
1.3.6.1.4.1.3052.17.2.16.18.1DisplayStringread-onlycurrent
auditLog
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.17
auditLogEnable
OBJECT-TYPE
ON/OFF enable audit log
1.3.6.1.4.1.3052.17.2.17.1DisplayStringread-writecurrent
auditLogStoreResets
OBJECT-TYPE
ON/OFF audit log stores when the unit resets
1.3.6.1.4.1.3052.17.2.17.2DisplayStringread-writecurrent
auditLogStoreCommands
OBJECT-TYPE
ON/OFF audit log stores commands entered in a command session
1.3.6.1.4.1.3052.17.2.17.3DisplayStringread-writecurrent
auditLogStoreRelays
OBJECT-TYPE
ON/OFF audit log stores relay activity
1.3.6.1.4.1.3052.17.2.17.4DisplayStringread-writecurrent
auditLogStoreAlarmActions
OBJECT-TYPE
ON/OFF audit log stores action delivery activity
1.3.6.1.4.1.3052.17.2.17.5DisplayStringread-writecurrent
auditLogStorePwdFailures
OBJECT-TYPE
ON/OFF audit log stores when user was denied login
1.3.6.1.4.1.3052.17.2.17.6DisplayStringread-writecurrent
auditLogStoreLogins
OBJECT-TYPE
ON/OFF audit log stores when a user was allowed login
1.3.6.1.4.1.3052.17.2.17.7DisplayStringread-writecurrent
auditLogStoreSHSK
OBJECT-TYPE
ON/OFF audit log stores serial handshaking status (regardless of serial handshaking event)
1.3.6.1.4.1.3052.17.2.17.8DisplayStringread-writecurrent
auditLogStorePassthrough
OBJECT-TYPE
ON/OFF audit log stores pass-through activity
1.3.6.1.4.1.3052.17.2.17.9DisplayStringread-writecurrent
auditLogStoreInactivity
OBJECT-TYPE
ON/OFF audit log stores when sessions expire due to inactivity
1.3.6.1.4.1.3052.17.2.17.10DisplayStringread-writecurrent
auditLogStorePolling
OBJECT-TYPE
ON/OFF audit log stores CRDB polling activity
1.3.6.1.4.1.3052.17.2.17.11DisplayStringread-writecurrent
auditLogMaxSize
OBJECT-TYPE
Maximum size (in KB) of audit log
1.3.6.1.4.1.3052.17.2.17.12Integer32read-writecurrent
scripting
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.18
scrGlobalEnable
OBJECT-TYPE
ON/OFF enable scripting
1.3.6.1.4.1.3052.17.2.18.1DisplayStringread-writecurrent
scrDTRCtrlPortEnableTable
OBJECT-TYPE
Table of DTR control port enables
1.3.6.1.4.1.3052.17.2.18.2not-accessiblecurrent
scrDTRCtrlPortEnableEntry
OBJECT-TYPE
Entry for table of DTR control port enables
1.3.6.1.4.1.3052.17.2.18.2.1not-accessiblecurrent
scrDTRCtrlPortEnableIndex
OBJECT-TYPE
Index for table of DTR control port enables
1.3.6.1.4.1.3052.17.2.18.2.1.1Integer32 (1..16)read-onlycurrent
scrDTRCtrlPortEnable
OBJECT-TYPE
ON/OFF enable DTR control of scripting for this port
1.3.6.1.4.1.3052.17.2.18.2.1.2DisplayStringread-writecurrent
scrTable
OBJECT-TYPE
Table of scripts
1.3.6.1.4.1.3052.17.2.18.3not-accessiblecurrent
scrEntry
OBJECT-TYPE
Entry for table of scripts
1.3.6.1.4.1.3052.17.2.18.3.1not-accessiblecurrent
scrIndex
OBJECT-TYPE
Index for table of scripts
1.3.6.1.4.1.3052.17.2.18.3.1.1Integer32 (1..20)read-onlycurrent
scrEnable
OBJECT-TYPE
ON/OFF enable this script
1.3.6.1.4.1.3052.17.2.18.3.1.2DisplayStringread-writecurrent
scrName
OBJECT-TYPE
Name of this script
1.3.6.1.4.1.3052.17.2.18.3.1.3DisplayStringread-writecurrent
scrFilename
OBJECT-TYPE
Filename for this script
1.3.6.1.4.1.3052.17.2.18.3.1.4DisplayStringread-writecurrent
scrRunAlways
OBJECT-TYPE
ON/OFF: this script always runs
1.3.6.1.4.1.3052.17.2.18.3.1.5DisplayStringread-writecurrent
scrRunAtStartup
OBJECT-TYPE
ON/OFF: this script runs at startup
1.3.6.1.4.1.3052.17.2.18.3.1.6DisplayStringread-writecurrent
scrRunScheduled
OBJECT-TYPE
ON/OFF: this script runs at a certain time of day
1.3.6.1.4.1.3052.17.2.18.3.1.7DisplayStringread-writecurrent
scrScheduleTime
OBJECT-TYPE
Time of day (HH:MM) this script is scheduled to run
1.3.6.1.4.1.3052.17.2.18.3.1.8DisplayStringread-writecurrent
scrArguments
OBJECT-TYPE
Arguments for this script
1.3.6.1.4.1.3052.17.2.18.3.1.9DisplayStringread-writecurrent
scrRepeatInterval
OBJECT-TYPE
How often this script runs (minutes)
1.3.6.1.4.1.3052.17.2.18.3.1.10Integer32read-writecurrent
scrVolatileStringTable
OBJECT-TYPE
Table of volatile string settings for use in scripts.
1.3.6.1.4.1.3052.17.2.18.4not-accessiblecurrent
scrVolatileStringEntry
OBJECT-TYPE
Entry for table of volatile script string settings
1.3.6.1.4.1.3052.17.2.18.4.1not-accessiblecurrent
scrVolatileStringIndex
OBJECT-TYPE
Index for table of volatile script string settings
1.3.6.1.4.1.3052.17.2.18.4.1.1Integer32 (1..50)read-onlycurrent
scrVolatileString
OBJECT-TYPE
Volatile string for use in scripts. Use this object to cache frequently-changing string values or string values that do not need to persist through reset. This object corresponds to the scripting.vstring[] setting key branch; use those keys in scripts and you can view or change their values with this object.
1.3.6.1.4.1.3052.17.2.18.4.1.2DisplayStringread-writecurrent
scrVolatileIntTable
OBJECT-TYPE
Table of volatile integer settings for use in scripts.
1.3.6.1.4.1.3052.17.2.18.5not-accessiblecurrent
scrVolatileIntEntry
OBJECT-TYPE
Entry for table of volatile script integer settings
1.3.6.1.4.1.3052.17.2.18.5.1not-accessiblecurrent
scrVolatileIntIndex
OBJECT-TYPE
Index for table of volatile script integer settings
1.3.6.1.4.1.3052.17.2.18.5.1.1Integer32 (1..50)read-onlycurrent
scrVolatileInt
OBJECT-TYPE
Volatile integer for use in scripts. Use this object to cache frequently-changing integer values or integer values that do not need to persist through reset. This object corresponds to the scripting.vint[] setting key branch; use those keys in scripts and you can view or change their values with this object.
1.3.6.1.4.1.3052.17.2.18.5.1.2Integer32 (0..2147483647)read-writecurrent
scrNonVolatileStringTable
OBJECT-TYPE
Table of non-volatile string settings for use in scripts.
1.3.6.1.4.1.3052.17.2.18.6not-accessiblecurrent
scrNonVolatileStringEntry
OBJECT-TYPE
Entry for table of non-volatile script string settings
1.3.6.1.4.1.3052.17.2.18.6.1not-accessiblecurrent
scrNonVolatileStringIndex
OBJECT-TYPE
Index for table of non-volatile script string settings
1.3.6.1.4.1.3052.17.2.18.6.1.1Integer32 (1..50)read-onlycurrent
scrNonVolatileString
OBJECT-TYPE
Non-volatile string for use in scripts. Use this object to store values that need to persist through reset. This object corresponds to the scripting.nvstring[] setting key branch; use those keys in scripts and you can view or change their values with this object. Note: to store frequently- changing integers, use the scrVolatileString object, otherwise your scripts may cause unnecessary wear of the non-volatile storage medium on the unit.
1.3.6.1.4.1.3052.17.2.18.6.1.2DisplayStringread-writecurrent
scrNonVolatileIntTable
OBJECT-TYPE
Table of non-volatile integer settings for use in scripts.
1.3.6.1.4.1.3052.17.2.18.7not-accessiblecurrent
scrNonVolatileIntEntry
OBJECT-TYPE
Entry for table of non-volatile script integer settings
1.3.6.1.4.1.3052.17.2.18.7.1not-accessiblecurrent
scrNonVolatileIntIndex
OBJECT-TYPE
Index for table of non-volatile script integer settings
1.3.6.1.4.1.3052.17.2.18.7.1.1Integer32 (1..50)read-onlycurrent
scrNonVolatileInt
OBJECT-TYPE
Non-volatile integer for use in scripts. Use this object to store integer values that need to persist through reset. This object corresponds to the scripting.nvint[] setting key branch; use those keys in scripts and you can view or change their values with this object. Note: to store frequently- changing integers, use the scrVolatileInt object, otherwise your scripts may cause unnecessary wear of the non-volatile storage medium on the unit.
1.3.6.1.4.1.3052.17.2.18.7.1.2Integer32 (0..2147483647)read-writecurrent
generator
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.19
genSet
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.19.1
genSetEnable
OBJECT-TYPE
Enable genset functionality; that is, a generator is in use.
1.3.6.1.4.1.3052.17.2.19.1.1DisplayStringread-writecurrent
genSetRelay
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.19.1.2
genSetRelayEs
OBJECT-TYPE
Which EventSensor has the relay which starts the generator.
1.3.6.1.4.1.3052.17.2.19.1.2.1Integer32 (1..200)read-writecurrent
genSetRelayPoint
OBJECT-TYPE
Which relay starts the generator.
1.3.6.1.4.1.3052.17.2.19.1.2.2Integer32 (1..13)read-writecurrent
genSetRelayRunningstate
OBJECT-TYPE
Which relay state corresponds with the generator starting/running.
1.3.6.1.4.1.3052.17.2.19.1.2.3DisplayStringread-writecurrent
genSetCC
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.19.1.3
genSetCCEnable
OBJECT-TYPE
Enable generator running detection functionality; that is, the associated CC is valid for determining if generator is running.
1.3.6.1.4.1.3052.17.2.19.1.3.1DisplayStringread-writecurrent
genSetCCEs
OBJECT-TYPE
Which CC EventSensor has the CC which is connected to the genertor running detection monitor.
1.3.6.1.4.1.3052.17.2.19.1.3.2Integer32 (1..200)read-writecurrent
genSetCCPoint
OBJECT-TYPE
Which CC is connected to the genertor running detection monitor.
1.3.6.1.4.1.3052.17.2.19.1.3.3Integer32 (1..64)read-writecurrent
genSetCCRunningState
OBJECT-TYPE
Which CC physical state corresponds with the generator running.
1.3.6.1.4.1.3052.17.2.19.1.3.4DisplayStringread-writecurrent
genRun
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.19.2
genRunMode
OBJECT-TYPE
Generator Exercising function main operating mode; set to INHIBIT to inhibit exercising the generator.
1.3.6.1.4.1.3052.17.2.19.2.1DisplayStringread-writecurrent
genRunSched
OBJECT-TYPE
Schedule number(s) which govern(s) when Generator Exercising function runs.
1.3.6.1.4.1.3052.17.2.19.2.2DisplayStringread-writecurrent
genRunDuration
OBJECT-TYPE
Number of seconds that generator should run, started when the generator needs to start by SCHEDULE or by being forced to start.
1.3.6.1.4.1.3052.17.2.19.2.3Integer32 (600..3600)read-writecurrent
genRunForce
OBJECT-TYPE
Write 1 to this to force the generator exercising to start. Always reads as 0.
1.3.6.1.4.1.3052.17.2.19.2.4Integer32 (0..1)read-writecurrent
genRunReqasm
OBJECT-TYPE
Require ASM connectivity before starting the generator from a schedule.
1.3.6.1.4.1.3052.17.2.19.2.5DisplayStringread-writecurrent
genRunStatus
OBJECT-TYPE
Status of Generator Exercising function.
1.3.6.1.4.1.3052.17.2.19.2.6DisplayStringread-onlycurrent
genRunNonstartEvent
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.19.2.7
genRunNonstartEventEnable
OBJECT-TYPE
Enable generator non-start event.
1.3.6.1.4.1.3052.17.2.19.2.7.1DisplayStringread-writecurrent
genRunNonstartEventActions
OBJECT-TYPE
Actions for generator non-start event.
1.3.6.1.4.1.3052.17.2.19.2.7.2DisplayStringread-writecurrent
genRunNonstartEventTrap
OBJECT-TYPE
Trap number for generator non-start event.
1.3.6.1.4.1.3052.17.2.19.2.7.3Integer32 (536..1199)read-writecurrent
genRunNonstartEventClass
OBJECT-TYPE
Class (severity) for generator non-start event.
1.3.6.1.4.1.3052.17.2.19.2.7.4DisplayStringread-writecurrent
calendar
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.2.20
schedTable
OBJECT-TYPE
Table of schedules
1.3.6.1.4.1.3052.17.2.20.1not-accessiblecurrent
schedEntry
OBJECT-TYPE
Entry for table of schedules.
1.3.6.1.4.1.3052.17.2.20.1.1not-accessiblecurrent
schedIndex
OBJECT-TYPE
Index for table of schedules.
1.3.6.1.4.1.3052.17.2.20.1.1.1Integer32 (1..8)read-onlycurrent
schedEnable
OBJECT-TYPE
Enable this schedule.
1.3.6.1.4.1.3052.17.2.20.1.1.2DisplayStringread-writecurrent
schedStart
OBJECT-TYPE
This is of the form 'mm/dd/yy hh:mm:ss'. This controls on which date/time the schedule starts.
1.3.6.1.4.1.3052.17.2.20.1.1.3DisplayStringread-writecurrent
schedRepeatMode
OBJECT-TYPE
Controls in which way the schedule should repeat.
1.3.6.1.4.1.3052.17.2.20.1.1.4DisplayStringread-writecurrent
schedRepeatFreq
OBJECT-TYPE
Controls how often the schedule should repeat: every nth day, week, month, or year.
1.3.6.1.4.1.3052.17.2.20.1.1.5Integer32 (1..400)read-writecurrent
schedRepeatEndMode
OBJECT-TYPE
Controls how the repeating schedule should end.
1.3.6.1.4.1.3052.17.2.20.1.1.6DisplayStringread-writecurrent
schedRepeatEndAfter
OBJECT-TYPE
Number of times this schedule should be repeated; relevant when the repeat end mode is AFTER.
1.3.6.1.4.1.3052.17.2.20.1.1.7Integer32 (1..1000)read-writecurrent
schedRepeatEndOn
OBJECT-TYPE
Date/time (in the form 'mm/yy/dd hh:mm:ss' or blank string) after which repeating should end, relevant when repeat end mode is ON DATE.
1.3.6.1.4.1.3052.17.2.20.1.1.8DisplayStringread-writecurrent
schedRepeatWeeklySun
OBJECT-TYPE
Run this schedule on Sunday(s); relevant when repeat mode is weekly.
1.3.6.1.4.1.3052.17.2.20.1.1.9DisplayStringread-writecurrent
schedRepeatWeeklyMon
OBJECT-TYPE
Run this schedule on Monday(s); relevant when repeat mode is weekly.
1.3.6.1.4.1.3052.17.2.20.1.1.10DisplayStringread-writecurrent
schedRepeatWeeklyTue
OBJECT-TYPE
Run this schedule on Tuesday(s); relevant when repeat mode is weekly.
1.3.6.1.4.1.3052.17.2.20.1.1.11DisplayStringread-writecurrent
schedRepeatWeeklyWed
OBJECT-TYPE
Run this schedule on Wednesday(s); relevant when repeat mode is weekly.
1.3.6.1.4.1.3052.17.2.20.1.1.12DisplayStringread-writecurrent
schedRepeatWeeklyThu
OBJECT-TYPE
Run this schedule on Thursday(s); relevant when repeat mode is weekly.
1.3.6.1.4.1.3052.17.2.20.1.1.13DisplayStringread-writecurrent
schedRepeatWeeklyFri
OBJECT-TYPE
Run this schedule on Friday(s); relevant when repeat mode is weekly.
1.3.6.1.4.1.3052.17.2.20.1.1.14DisplayStringread-writecurrent
schedRepeatWeeklySat
OBJECT-TYPE
Run this schedule on Saturday(s); relevant when repeat mode is weekly.
1.3.6.1.4.1.3052.17.2.20.1.1.15DisplayStringread-writecurrent
schedRepeatMonthlyMode
OBJECT-TYPE
EACH means the schedule runs on specific dates of the month. ON THE means the schedule runs on calculated dates of the month according to which day that month starts.
1.3.6.1.4.1.3052.17.2.20.1.1.16DisplayStringread-writecurrent
schedRepeatMonthlyDates
OBJECT-TYPE
Comma-separated list of dates of a month on which this schedule should run, relevant when repeat monthly mode is EACH.
1.3.6.1.4.1.3052.17.2.20.1.1.17DisplayStringread-writecurrent
schedRepeatMonthlyOnThe
OBJECT-TYPE
Controls on which day of the month this schedule should run, relevant when repeat monthly mode is ON THE.
1.3.6.1.4.1.3052.17.2.20.1.1.18DisplayStringread-writecurrent
schedRepeatMonthlyOnDay
OBJECT-TYPE
Controls the day of week on which this schedule is run, relevant when repeat monthly mode is ON THE
1.3.6.1.4.1.3052.17.2.20.1.1.19DisplayStringread-writecurrent
schedRepeatYearlyJan
OBJECT-TYPE
Run this schedule in January, relevant when repeat mode is YEARLY.
1.3.6.1.4.1.3052.17.2.20.1.1.20DisplayStringread-writecurrent
schedRepeatYearlyFeb
OBJECT-TYPE
Run this schedule in February, relevant when repeat mode is YEARLY.
1.3.6.1.4.1.3052.17.2.20.1.1.21DisplayStringread-writecurrent
schedRepeatYearlyMar
OBJECT-TYPE
Run this schedule in March, relevant when repeat mode is YEARLY.
1.3.6.1.4.1.3052.17.2.20.1.1.22DisplayStringread-writecurrent
schedRepeatYearlyApr
OBJECT-TYPE
Run this schedule in April, relevant when repeat mode is YEARLY.
1.3.6.1.4.1.3052.17.2.20.1.1.23DisplayStringread-writecurrent
schedRepeatYearlyMay
OBJECT-TYPE
Run this schedule in May, relevant when repeat mode is YEARLY.
1.3.6.1.4.1.3052.17.2.20.1.1.24DisplayStringread-writecurrent
schedRepeatYearlyJun
OBJECT-TYPE
Run this schedule in June, relevant when repeat mode is YEARLY.
1.3.6.1.4.1.3052.17.2.20.1.1.25DisplayStringread-writecurrent
schedRepeatYearlyJul
OBJECT-TYPE
Run this schedule in July, relevant when repeat mode is YEARLY.
1.3.6.1.4.1.3052.17.2.20.1.1.26DisplayStringread-writecurrent
schedRepeatYearlyAug
OBJECT-TYPE
Run this schedule in August, relevant when repeat mode is YEARLY.
1.3.6.1.4.1.3052.17.2.20.1.1.27DisplayStringread-writecurrent
schedRepeatYearlySep
OBJECT-TYPE
Run this schedule in September, relevant when repeat mode is YEARLY.
1.3.6.1.4.1.3052.17.2.20.1.1.28DisplayStringread-writecurrent
schedRepeatYearlyOct
OBJECT-TYPE
Run this schedule in October, relevant when repeat mode is YEARLY.
1.3.6.1.4.1.3052.17.2.20.1.1.29DisplayStringread-writecurrent
schedRepeatYearlyNov
OBJECT-TYPE
Run this schedule in November, relevant when repeat mode is YEARLY.
1.3.6.1.4.1.3052.17.2.20.1.1.30DisplayStringread-writecurrent
schedRepeatYearlyDec
OBJECT-TYPE
Run this schedule in December, relevant when repeat mode is YEARLY.
1.3.6.1.4.1.3052.17.2.20.1.1.31DisplayStringread-writecurrent
schedRepeatYearlyOnThe
OBJECT-TYPE
Controls on which day of the month this schedule should run, relevant when repeat mode is YEARLY.
1.3.6.1.4.1.3052.17.2.20.1.1.32DisplayStringread-writecurrent
schedRepeatYearlyOnDay
OBJECT-TYPE
Controls the day of week on which this schedule is run, relevant when repeat mode is YEARLY.
1.3.6.1.4.1.3052.17.2.20.1.1.33DisplayStringread-writecurrent
schedNextTrigger
OBJECT-TYPE
When this schedule will next trigger.
1.3.6.1.4.1.3052.17.2.20.1.1.34DisplayStringread-onlycurrent
productIds
OBJECT-IDENTITY
1.3.6.1.4.1.3052.17.3
siteName
OBJECT-TYPE
Site Name string; Max 40 characters.
1.3.6.1.4.1.3052.17.3.1DisplayStringread-onlycurrent
thisProduct
OBJECT-TYPE
This is a factory configured string for the product name.
1.3.6.1.4.1.3052.17.3.2DisplayStringread-onlycurrent
stockTrapString
OBJECT-TYPE
The message defined for the event that triggers a trap.
1.3.6.1.4.1.3052.17.3.3DisplayStringread-onlycurrent
trapEventTypeNumber
OBJECT-TYPE
The user-defined trap variable for the type of event that happened. Here are the definitions: 4 SCHEDULED 7 Serial Handshaking Low 8 Serial Handshaking High 10 Contact Closure Active 11 Contact Closure Inactive 12 Temperature High 13 Temperature Very High 14 Temperature Low 15 Temperature Very Low 16 Temperature Return to Normal 17 Humidity High 18 Humidity Very High 19 Humidity Low 20 Humidity Very Low 21 Humidity Return to Normal 26 Analog High 27 Analog Very High 28 Analog Low 29 Analog Very Low 30 Analog Normal 40 EventSensor Unresponsive 100 Contact Closure Active Reminder 101 Temperature High Reminder 102 Temperature High Very Reminder 103 Temperature Low Reminder 104 Temperature Very Low Reminder 105 Humidity High Reminder 106 Humidity Very High Reminder 107 Humidity Low Reminder 108 Humidity Very Low Reminder 109 Analog High Reminder 110 Analog Very High Reminder 111 Analog Low Reminder 112 Analog Very Low Reminder
1.3.6.1.4.1.3052.17.3.4Integer32read-onlycurrent
trapEventTypeName
OBJECT-TYPE
The user-defined trap variable for the string corresponding to the event type.
1.3.6.1.4.1.3052.17.3.5DisplayStringread-onlycurrent
trapIncludedValue
OBJECT-TYPE
The user-defined trap variable for the generic included value.
1.3.6.1.4.1.3052.17.3.6Integer32 (-2147483648..2147483647)read-onlycurrent
trapIncludedString
OBJECT-TYPE
The user-defined trap variable for the generic included string.
1.3.6.1.4.1.3052.17.3.7DisplayStringread-onlycurrent
trapTypeString
OBJECT-TYPE
The cause of the trap, added for DL880 compatibility.
1.3.6.1.4.1.3052.17.3.8DisplayStringread-onlycurrent
trapEventClassNumber
OBJECT-TYPE
The user-defined trap variable for the configurable class number associated with the triggering event.
1.3.6.1.4.1.3052.17.3.9Integer32read-onlycurrent
trapEventClassName
OBJECT-TYPE
The user-defined trap variable for the configurable class name associated with the class number.
1.3.6.1.4.1.3052.17.3.10DisplayStringread-onlycurrent
keyInterface
OBJECT-TYPE
This object represents a setting key interface. When setting this object, the value to set is the 'sk' command you would enter on the command line (without the 'sk'). To get the result of the operation, read this object after you write it. For example, to configure EventSensor 1 contact closure 34 event actions to be an SNMP InformRequest to host foo, set this object to: 'event.sensor[1].cc[34].eventactions=inform(foo)'. The SNMP response is the result of the operation: if setting that key to that value was a success then the SNMP response will be a success and the response value will be what you had set. If you subsequently read this object then you will see a message 'OK: ...'. If setting that key to that value failed then the SNMP response will be a failure (a badValue response). If you subsequently read this object then the value returned is the reason that setting that key to that value failed. For another example, to read user 3's pass-through access for port 7, set this object to: 'sec.user[3].port[7].ptaccess'. The SNMP response is the result of the operation: if reading that key is a success then the SNMP response will be a success and the response value will be what you had SET (i.e., the opertion of reading a key, which is just the key itself with no '=' operator, and this is not the key value you want to read). If you subsequently read this object then the value returned is the value of the key you want to read. If reading that key failed (e.g., if the key is invalid) then the SNMP response to your SNMP set operation (the value you set being the invalid key to read) will be a failure (a badValue response). If you subsequently read this object then the value returned is the reason that reading that key failed (i.e., 'invalid key').
1.3.6.1.4.1.3052.17.4DisplayStringread-writecurrent

Notifications

NameOIDStatus
s450StockContactClosureTrap
NOTIFICATION-TYPE
A stock contact closure trap is issued when a contact closure event happens.
1.3.6.1.4.1.3052.17.0.110current
s450StockTempTrap
NOTIFICATION-TYPE
A stock temperature trap is issued when a temperature event happens.
1.3.6.1.4.1.3052.17.0.120current
s450StockHumidityTrap
NOTIFICATION-TYPE
A stock humidity trap is issued when a humidity event happens.
1.3.6.1.4.1.3052.17.0.130current
s450StockAnalogTrap
NOTIFICATION-TYPE
A stock analog trap is issued when an analog sensor event happens.
1.3.6.1.4.1.3052.17.0.140current
s450StockOutputTrap
NOTIFICATION-TYPE
A stock output trap is issued when an output event happens. That is, depending on the configuration, when an output changes state for any reason, this trap will be sent.
1.3.6.1.4.1.3052.17.0.150current
s450StockSchedTrap
NOTIFICATION-TYPE
The stock scheduled alarm trap is issued when the current time reaches the scheduled alarm time.
1.3.6.1.4.1.3052.17.0.506current
s450StockImmediateTrap
NOTIFICATION-TYPE
The stock immediate alarm trap is issued when the user enters the DOTRAP command.
1.3.6.1.4.1.3052.17.0.507current
s450StockCTSTrap
NOTIFICATION-TYPE
A stock CTS trap is issued when an RS-232 CTS event happens.
1.3.6.1.4.1.3052.17.0.510current
s450CPEDownTrap
NOTIFICATION-TYPE
A stock CPE Down trap is issued when a CPE Down event happens.
1.3.6.1.4.1.3052.17.0.511current
s450FuelSensorDisconnectTrap
NOTIFICATION-TYPE
A stock Fuel Sensor Disconnect trap is issued when a Fuel Sensor Disconnect or Connect (Return to Normal) event happens.
1.3.6.1.4.1.3052.17.0.515current
s450FuelSensorVolumeTrap
NOTIFICATION-TYPE
A stock Fuel Sensor Volume trap is issued when a Fuel Sensor Volume event happens
1.3.6.1.4.1.3052.17.0.519current
s450ACPowerMonitorAvgVoltageTrap
NOTIFICATION-TYPE
A stock AC power monitor average voltage trap is issued when an AC power monitor average voltage event happens.
1.3.6.1.4.1.3052.17.0.520current
s450ACPowerMonitorAvgCurrentTrap
NOTIFICATION-TYPE
A stock AC power monitor average current trap is issued when an AC power monitor average current event happens.
1.3.6.1.4.1.3052.17.0.521current
s450ACPowerMonitorFrequencyTrap
NOTIFICATION-TYPE
A stock AC power monitor frequency trap is issued when an AC power monitor frequency event happens.
1.3.6.1.4.1.3052.17.0.522current
s450ACPowerMonitorTRPTrap
NOTIFICATION-TYPE
A stock AC power monitor TRP (total real power) trap is issued when an AC power monitor TRP event happens.
1.3.6.1.4.1.3052.17.0.523current
s450ACPowerMonitorDisconnectTrap
NOTIFICATION-TYPE
A stock AC power monitor disconnect trap is issued when an AC power monitor disconnect event happens.
1.3.6.1.4.1.3052.17.0.524current
s450StockScriptTrap
NOTIFICATION-TYPE
A stock script trap is issued when a script triggers an event via a_lib.PostEvent() called with no trap number (or this trap number) specified.
1.3.6.1.4.1.3052.17.0.526current
s450FuelSensorVolumeSuddenChangeTrap
NOTIFICATION-TYPE
A stock Fuel Sensor Volume Sudden Change trap is issued when a Fuel Sensor Volume Sudden Change event happens
1.3.6.1.4.1.3052.17.0.527current
s450FuelSensorVolumeSlowChangeTrap
NOTIFICATION-TYPE
A stock Fuel Sensor Volume Slow Change trap is issued when a Fuel Sensor Volume Slow Change event happens
1.3.6.1.4.1.3052.17.0.528current
s450BattMonStringTemperatureTrap
NOTIFICATION-TYPE
A stock Battery Monitor String Temperature trap is issued when a Battery Monitor String Temperature event happens.
1.3.6.1.4.1.3052.17.0.530current
s450BattMonStringDiffTemperatureTrap
NOTIFICATION-TYPE
A stock Battery Monitor String Differential Temperature trap is issued when a Battery Monitor String Differential Temperature event happens.
1.3.6.1.4.1.3052.17.0.531current
s450BattMonStringVoltageTrap
NOTIFICATION-TYPE
A stock Battery Monitor String Voltage trap is issued when a Battery Monitor String Voltage event happens.
1.3.6.1.4.1.3052.17.0.532current
s450BattMonStringChargeLevelTrap
NOTIFICATION-TYPE
A stock Battery Monitor String Charge Level trap is issued when a Battery Monitor String Charge Level event happens.
1.3.6.1.4.1.3052.17.0.533current
s450BattMonStringChargingCurrentTrap
NOTIFICATION-TYPE
A stock Battery Monitor String Charging Current trap is issued when a Battery Monitor String Charging Current event happens.
1.3.6.1.4.1.3052.17.0.534current
s450BattMonStringDischargingCurrentTrap
NOTIFICATION-TYPE
A stock Battery Monitor String Discharging Current trap is issued when a Battery Monitor String Discharging Current event happens.
1.3.6.1.4.1.3052.17.0.535current
s450GeneratorNonStartTrap
NOTIFICATION-TYPE
A stock Generator Non-start trap is issued when the unit commands the generator to start as part of the generator exercising feature, and the generator fails to register as started after 30 seconds (as detected by CC generator running detection).
1.3.6.1.4.1.3052.17.0.536current
s450BattMonStringDifferentialVoltageTrap
NOTIFICATION-TYPE
A stock Battery Monitor String Differential Voltage trap is issued when a Battery Monitor String Differential Voltage event happens.
1.3.6.1.4.1.3052.17.0.537current
s450BattMonStringJarHealthTrap
NOTIFICATION-TYPE
A stock Battery Monitor String Jar Health trap is issued when a Battery Monitor String Jar Health event happens.
1.3.6.1.4.1.3052.17.0.538current
s450CameraTrap
NOTIFICATION-TYPE
A stock camera trap is issued when a camera event happens.
1.3.6.1.4.1.3052.17.0.539current
s450ACTotalPowerFactorTrap
NOTIFICATION-TYPE
A stock AC power monitor total power factor trap is issued when an AC power monitor total power factor event happens.
1.3.6.1.4.1.3052.17.0.540current
s450ResetTrap
NOTIFICATION-TYPE
A stock reset trap is issued when a reset event happens.
1.3.6.1.4.1.3052.17.0.543current
s450UserTrap1000
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1000.
1.3.6.1.4.1.3052.17.0.1000current
s450UserTrap1001
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1001.
1.3.6.1.4.1.3052.17.0.1001current
s450UserTrap1002
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1002.
1.3.6.1.4.1.3052.17.0.1002current
s450UserTrap1003
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1003.
1.3.6.1.4.1.3052.17.0.1003current
s450UserTrap1004
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1004.
1.3.6.1.4.1.3052.17.0.1004current
s450UserTrap1005
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1005.
1.3.6.1.4.1.3052.17.0.1005current
s450UserTrap1006
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1006.
1.3.6.1.4.1.3052.17.0.1006current
s450UserTrap1007
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1007.
1.3.6.1.4.1.3052.17.0.1007current
s450UserTrap1008
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1008.
1.3.6.1.4.1.3052.17.0.1008current
s450UserTrap1009
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1009.
1.3.6.1.4.1.3052.17.0.1009current
s450UserTrap1010
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1010.
1.3.6.1.4.1.3052.17.0.1010current
s450UserTrap1011
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1011.
1.3.6.1.4.1.3052.17.0.1011current
s450UserTrap1012
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1012.
1.3.6.1.4.1.3052.17.0.1012current
s450UserTrap1013
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1013.
1.3.6.1.4.1.3052.17.0.1013current
s450UserTrap1014
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1014.
1.3.6.1.4.1.3052.17.0.1014current
s450UserTrap1015
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1015.
1.3.6.1.4.1.3052.17.0.1015current
s450UserTrap1016
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1016.
1.3.6.1.4.1.3052.17.0.1016current
s450UserTrap1017
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1017.
1.3.6.1.4.1.3052.17.0.1017current
s450UserTrap1018
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1018.
1.3.6.1.4.1.3052.17.0.1018current
s450UserTrap1019
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1019.
1.3.6.1.4.1.3052.17.0.1019current
s450UserTrap1020
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1020.
1.3.6.1.4.1.3052.17.0.1020current
s450UserTrap1021
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1021.
1.3.6.1.4.1.3052.17.0.1021current
s450UserTrap1022
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1022.
1.3.6.1.4.1.3052.17.0.1022current
s450UserTrap1023
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1023.
1.3.6.1.4.1.3052.17.0.1023current
s450UserTrap1024
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1024.
1.3.6.1.4.1.3052.17.0.1024current
s450UserTrap1025
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1025.
1.3.6.1.4.1.3052.17.0.1025current
s450UserTrap1026
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1026.
1.3.6.1.4.1.3052.17.0.1026current
s450UserTrap1027
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1027.
1.3.6.1.4.1.3052.17.0.1027current
s450UserTrap1028
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1028.
1.3.6.1.4.1.3052.17.0.1028current
s450UserTrap1029
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1029.
1.3.6.1.4.1.3052.17.0.1029current
s450UserTrap1030
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1030.
1.3.6.1.4.1.3052.17.0.1030current
s450UserTrap1031
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1031.
1.3.6.1.4.1.3052.17.0.1031current
s450UserTrap1032
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1032.
1.3.6.1.4.1.3052.17.0.1032current
s450UserTrap1033
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1033.
1.3.6.1.4.1.3052.17.0.1033current
s450UserTrap1034
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1034.
1.3.6.1.4.1.3052.17.0.1034current
s450UserTrap1035
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1035.
1.3.6.1.4.1.3052.17.0.1035current
s450UserTrap1036
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1036.
1.3.6.1.4.1.3052.17.0.1036current
s450UserTrap1037
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1037.
1.3.6.1.4.1.3052.17.0.1037current
s450UserTrap1038
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1038.
1.3.6.1.4.1.3052.17.0.1038current
s450UserTrap1039
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1039.
1.3.6.1.4.1.3052.17.0.1039current
s450UserTrap1040
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1040.
1.3.6.1.4.1.3052.17.0.1040current
s450UserTrap1041
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1041.
1.3.6.1.4.1.3052.17.0.1041current
s450UserTrap1042
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1042.
1.3.6.1.4.1.3052.17.0.1042current
s450UserTrap1043
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1043.
1.3.6.1.4.1.3052.17.0.1043current
s450UserTrap1044
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1044.
1.3.6.1.4.1.3052.17.0.1044current
s450UserTrap1045
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1045.
1.3.6.1.4.1.3052.17.0.1045current
s450UserTrap1046
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1046.
1.3.6.1.4.1.3052.17.0.1046current
s450UserTrap1047
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1047.
1.3.6.1.4.1.3052.17.0.1047current
s450UserTrap1048
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1048.
1.3.6.1.4.1.3052.17.0.1048current
s450UserTrap1049
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1049.
1.3.6.1.4.1.3052.17.0.1049current
s450UserTrap1050
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1050.
1.3.6.1.4.1.3052.17.0.1050current
s450UserTrap1051
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1051.
1.3.6.1.4.1.3052.17.0.1051current
s450UserTrap1052
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1052.
1.3.6.1.4.1.3052.17.0.1052current
s450UserTrap1053
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1053.
1.3.6.1.4.1.3052.17.0.1053current
s450UserTrap1054
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1054.
1.3.6.1.4.1.3052.17.0.1054current
s450UserTrap1055
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1055.
1.3.6.1.4.1.3052.17.0.1055current
s450UserTrap1056
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1056.
1.3.6.1.4.1.3052.17.0.1056current
s450UserTrap1057
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1057.
1.3.6.1.4.1.3052.17.0.1057current
s450UserTrap1058
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1058.
1.3.6.1.4.1.3052.17.0.1058current
s450UserTrap1059
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1059.
1.3.6.1.4.1.3052.17.0.1059current
s450UserTrap1060
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1060.
1.3.6.1.4.1.3052.17.0.1060current
s450UserTrap1061
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1061.
1.3.6.1.4.1.3052.17.0.1061current
s450UserTrap1062
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1062.
1.3.6.1.4.1.3052.17.0.1062current
s450UserTrap1063
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1063.
1.3.6.1.4.1.3052.17.0.1063current
s450UserTrap1064
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1064.
1.3.6.1.4.1.3052.17.0.1064current
s450UserTrap1065
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1065.
1.3.6.1.4.1.3052.17.0.1065current
s450UserTrap1066
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1066.
1.3.6.1.4.1.3052.17.0.1066current
s450UserTrap1067
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1067.
1.3.6.1.4.1.3052.17.0.1067current
s450UserTrap1068
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1068.
1.3.6.1.4.1.3052.17.0.1068current
s450UserTrap1069
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1069.
1.3.6.1.4.1.3052.17.0.1069current
s450UserTrap1070
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1070.
1.3.6.1.4.1.3052.17.0.1070current
s450UserTrap1071
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1071.
1.3.6.1.4.1.3052.17.0.1071current
s450UserTrap1072
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1072.
1.3.6.1.4.1.3052.17.0.1072current
s450UserTrap1073
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1073.
1.3.6.1.4.1.3052.17.0.1073current
s450UserTrap1074
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1074.
1.3.6.1.4.1.3052.17.0.1074current
s450UserTrap1075
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1075.
1.3.6.1.4.1.3052.17.0.1075current
s450UserTrap1076
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1076.
1.3.6.1.4.1.3052.17.0.1076current
s450UserTrap1077
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1077.
1.3.6.1.4.1.3052.17.0.1077current
s450UserTrap1078
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1078.
1.3.6.1.4.1.3052.17.0.1078current
s450UserTrap1079
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1079.
1.3.6.1.4.1.3052.17.0.1079current
s450UserTrap1080
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1080.
1.3.6.1.4.1.3052.17.0.1080current
s450UserTrap1081
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1081.
1.3.6.1.4.1.3052.17.0.1081current
s450UserTrap1082
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1082.
1.3.6.1.4.1.3052.17.0.1082current
s450UserTrap1083
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1083.
1.3.6.1.4.1.3052.17.0.1083current
s450UserTrap1084
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1084.
1.3.6.1.4.1.3052.17.0.1084current
s450UserTrap1085
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1085.
1.3.6.1.4.1.3052.17.0.1085current
s450UserTrap1086
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1086.
1.3.6.1.4.1.3052.17.0.1086current
s450UserTrap1087
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1087.
1.3.6.1.4.1.3052.17.0.1087current
s450UserTrap1088
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1088.
1.3.6.1.4.1.3052.17.0.1088current
s450UserTrap1089
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1089.
1.3.6.1.4.1.3052.17.0.1089current
s450UserTrap1090
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1090.
1.3.6.1.4.1.3052.17.0.1090current
s450UserTrap1091
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1091.
1.3.6.1.4.1.3052.17.0.1091current
s450UserTrap1092
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1092.
1.3.6.1.4.1.3052.17.0.1092current
s450UserTrap1093
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1093.
1.3.6.1.4.1.3052.17.0.1093current
s450UserTrap1094
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1094.
1.3.6.1.4.1.3052.17.0.1094current
s450UserTrap1095
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1095.
1.3.6.1.4.1.3052.17.0.1095current
s450UserTrap1096
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1096.
1.3.6.1.4.1.3052.17.0.1096current
s450UserTrap1097
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1097.
1.3.6.1.4.1.3052.17.0.1097current
s450UserTrap1098
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1098.
1.3.6.1.4.1.3052.17.0.1098current
s450UserTrap1099
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1099.
1.3.6.1.4.1.3052.17.0.1099current
s450UserTrap1100
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1100.
1.3.6.1.4.1.3052.17.0.1100current
s450UserTrap1101
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1101.
1.3.6.1.4.1.3052.17.0.1101current
s450UserTrap1102
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1102.
1.3.6.1.4.1.3052.17.0.1102current
s450UserTrap1103
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1103.
1.3.6.1.4.1.3052.17.0.1103current
s450UserTrap1104
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1104.
1.3.6.1.4.1.3052.17.0.1104current
s450UserTrap1105
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1105.
1.3.6.1.4.1.3052.17.0.1105current
s450UserTrap1106
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1106.
1.3.6.1.4.1.3052.17.0.1106current
s450UserTrap1107
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1107.
1.3.6.1.4.1.3052.17.0.1107current
s450UserTrap1108
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1108.
1.3.6.1.4.1.3052.17.0.1108current
s450UserTrap1109
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1109.
1.3.6.1.4.1.3052.17.0.1109current
s450UserTrap1110
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1110.
1.3.6.1.4.1.3052.17.0.1110current
s450UserTrap1111
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1111.
1.3.6.1.4.1.3052.17.0.1111current
s450UserTrap1112
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1112.
1.3.6.1.4.1.3052.17.0.1112current
s450UserTrap1113
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1113.
1.3.6.1.4.1.3052.17.0.1113current
s450UserTrap1114
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1114.
1.3.6.1.4.1.3052.17.0.1114current
s450UserTrap1115
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1115.
1.3.6.1.4.1.3052.17.0.1115current
s450UserTrap1116
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1116.
1.3.6.1.4.1.3052.17.0.1116current
s450UserTrap1117
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1117.
1.3.6.1.4.1.3052.17.0.1117current
s450UserTrap1118
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1118.
1.3.6.1.4.1.3052.17.0.1118current
s450UserTrap1119
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1119.
1.3.6.1.4.1.3052.17.0.1119current
s450UserTrap1120
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1120.
1.3.6.1.4.1.3052.17.0.1120current
s450UserTrap1121
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1121.
1.3.6.1.4.1.3052.17.0.1121current
s450UserTrap1122
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1122.
1.3.6.1.4.1.3052.17.0.1122current
s450UserTrap1123
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1123.
1.3.6.1.4.1.3052.17.0.1123current
s450UserTrap1124
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1124.
1.3.6.1.4.1.3052.17.0.1124current
s450UserTrap1125
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1125.
1.3.6.1.4.1.3052.17.0.1125current
s450UserTrap1126
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1126.
1.3.6.1.4.1.3052.17.0.1126current
s450UserTrap1127
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1127.
1.3.6.1.4.1.3052.17.0.1127current
s450UserTrap1128
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1128.
1.3.6.1.4.1.3052.17.0.1128current
s450UserTrap1129
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1129.
1.3.6.1.4.1.3052.17.0.1129current
s450UserTrap1130
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1130.
1.3.6.1.4.1.3052.17.0.1130current
s450UserTrap1131
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1131.
1.3.6.1.4.1.3052.17.0.1131current
s450UserTrap1132
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1132.
1.3.6.1.4.1.3052.17.0.1132current
s450UserTrap1133
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1133.
1.3.6.1.4.1.3052.17.0.1133current
s450UserTrap1134
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1134.
1.3.6.1.4.1.3052.17.0.1134current
s450UserTrap1135
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1135.
1.3.6.1.4.1.3052.17.0.1135current
s450UserTrap1136
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1136.
1.3.6.1.4.1.3052.17.0.1136current
s450UserTrap1137
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1137.
1.3.6.1.4.1.3052.17.0.1137current
s450UserTrap1138
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1138.
1.3.6.1.4.1.3052.17.0.1138current
s450UserTrap1139
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1139.
1.3.6.1.4.1.3052.17.0.1139current
s450UserTrap1140
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1140.
1.3.6.1.4.1.3052.17.0.1140current
s450UserTrap1141
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1141.
1.3.6.1.4.1.3052.17.0.1141current
s450UserTrap1142
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1142.
1.3.6.1.4.1.3052.17.0.1142current
s450UserTrap1143
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1143.
1.3.6.1.4.1.3052.17.0.1143current
s450UserTrap1144
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1144.
1.3.6.1.4.1.3052.17.0.1144current
s450UserTrap1145
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1145.
1.3.6.1.4.1.3052.17.0.1145current
s450UserTrap1146
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1146.
1.3.6.1.4.1.3052.17.0.1146current
s450UserTrap1147
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1147.
1.3.6.1.4.1.3052.17.0.1147current
s450UserTrap1148
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1148.
1.3.6.1.4.1.3052.17.0.1148current
s450UserTrap1149
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1149.
1.3.6.1.4.1.3052.17.0.1149current
s450UserTrap1150
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1150.
1.3.6.1.4.1.3052.17.0.1150current
s450UserTrap1151
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1151.
1.3.6.1.4.1.3052.17.0.1151current
s450UserTrap1152
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1152.
1.3.6.1.4.1.3052.17.0.1152current
s450UserTrap1153
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1153.
1.3.6.1.4.1.3052.17.0.1153current
s450UserTrap1154
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1154.
1.3.6.1.4.1.3052.17.0.1154current
s450UserTrap1155
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1155.
1.3.6.1.4.1.3052.17.0.1155current
s450UserTrap1156
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1156.
1.3.6.1.4.1.3052.17.0.1156current
s450UserTrap1157
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1157.
1.3.6.1.4.1.3052.17.0.1157current
s450UserTrap1158
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1158.
1.3.6.1.4.1.3052.17.0.1158current
s450UserTrap1159
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1159.
1.3.6.1.4.1.3052.17.0.1159current
s450UserTrap1160
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1160.
1.3.6.1.4.1.3052.17.0.1160current
s450UserTrap1161
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1161.
1.3.6.1.4.1.3052.17.0.1161current
s450UserTrap1162
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1162.
1.3.6.1.4.1.3052.17.0.1162current
s450UserTrap1163
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1163.
1.3.6.1.4.1.3052.17.0.1163current
s450UserTrap1164
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1164.
1.3.6.1.4.1.3052.17.0.1164current
s450UserTrap1165
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1165.
1.3.6.1.4.1.3052.17.0.1165current
s450UserTrap1166
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1166.
1.3.6.1.4.1.3052.17.0.1166current
s450UserTrap1167
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1167.
1.3.6.1.4.1.3052.17.0.1167current
s450UserTrap1168
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1168.
1.3.6.1.4.1.3052.17.0.1168current
s450UserTrap1169
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1169.
1.3.6.1.4.1.3052.17.0.1169current
s450UserTrap1170
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1170.
1.3.6.1.4.1.3052.17.0.1170current
s450UserTrap1171
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1171.
1.3.6.1.4.1.3052.17.0.1171current
s450UserTrap1172
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1172.
1.3.6.1.4.1.3052.17.0.1172current
s450UserTrap1173
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1173.
1.3.6.1.4.1.3052.17.0.1173current
s450UserTrap1174
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1174.
1.3.6.1.4.1.3052.17.0.1174current
s450UserTrap1175
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1175.
1.3.6.1.4.1.3052.17.0.1175current
s450UserTrap1176
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1176.
1.3.6.1.4.1.3052.17.0.1176current
s450UserTrap1177
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1177.
1.3.6.1.4.1.3052.17.0.1177current
s450UserTrap1178
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1178.
1.3.6.1.4.1.3052.17.0.1178current
s450UserTrap1179
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1179.
1.3.6.1.4.1.3052.17.0.1179current
s450UserTrap1180
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1180.
1.3.6.1.4.1.3052.17.0.1180current
s450UserTrap1181
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1181.
1.3.6.1.4.1.3052.17.0.1181current
s450UserTrap1182
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1182.
1.3.6.1.4.1.3052.17.0.1182current
s450UserTrap1183
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1183.
1.3.6.1.4.1.3052.17.0.1183current
s450UserTrap1184
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1184.
1.3.6.1.4.1.3052.17.0.1184current
s450UserTrap1185
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1185.
1.3.6.1.4.1.3052.17.0.1185current
s450UserTrap1186
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1186.
1.3.6.1.4.1.3052.17.0.1186current
s450UserTrap1187
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1187.
1.3.6.1.4.1.3052.17.0.1187current
s450UserTrap1188
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1188.
1.3.6.1.4.1.3052.17.0.1188current
s450UserTrap1189
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1189.
1.3.6.1.4.1.3052.17.0.1189current
s450UserTrap1190
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1190.
1.3.6.1.4.1.3052.17.0.1190current
s450UserTrap1191
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1191.
1.3.6.1.4.1.3052.17.0.1191current
s450UserTrap1192
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1192.
1.3.6.1.4.1.3052.17.0.1192current
s450UserTrap1193
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1193.
1.3.6.1.4.1.3052.17.0.1193current
s450UserTrap1194
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1194.
1.3.6.1.4.1.3052.17.0.1194current
s450UserTrap1195
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1195.
1.3.6.1.4.1.3052.17.0.1195current
s450UserTrap1196
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1196.
1.3.6.1.4.1.3052.17.0.1196current
s450UserTrap1197
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1197.
1.3.6.1.4.1.3052.17.0.1197current
s450UserTrap1198
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1198.
1.3.6.1.4.1.3052.17.0.1198current
s450UserTrap1199
NOTIFICATION-TYPE
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1199.
1.3.6.1.4.1.3052.17.0.1199current