SITEBOSS-220-STD-MIB
- Registered at
- 1.3.6.1.4.1.3052.43
- Last updated
- 2013-06-13 01:01
- Organization
- Asentria Corporation
- Revisions
- 2013-06-13 01:01, 2013-06-07 01:00
- Namespace
- asentria
- Source file
SITEBOSS-220-STD-MIB- Digest
sha256:488f3a05294ea2e271732d9183f29c2c7501da41f1939d864f5d298fa39e1898
Description
MIB module for managing Asentria SiteBoss 220
Contact
Phone: 206-344-8800 Fax: 206-344-2116 Email: support@asentria.com
Imports
| From | Symbols |
|---|---|
| ASENTRIA-ROOT-MIB | asentria |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ASENTRIA-ROOT-MIB SITEBOSS-220-STD-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| notification OBJECT-IDENTITY | 1.3.6.1.4.1.3052.43.0 | |||
| status OBJECT-IDENTITY | 1.3.6.1.4.1.3052.43.1 | |||
| eventSensorStatus OBJECT-IDENTITY | 1.3.6.1.4.1.3052.43.1.1 | |||
| esPointTable OBJECT-TYPE This table organizes 4 basic attributes of points. A point is a particular sensor on an EventSensor (e.g., temperature, humidity, contact closure 2, relay 5, etc.). The 4 point attributes are its name, whether it's in its event state, the point's value as a number and its value as a string. Points are referenced by a point index. The point index is a string of 3 numbers separated by periods. It contains all the information necessary for getting a piece of data off an event sensor; namely, which EventSensor, point class, and which-sensor-of-that-class (a.k.a. point). | 1.3.6.1.4.1.3052.43.1.1.1 | not-accessible | current | |
| esPointEntry OBJECT-TYPE Entry for EventSensor point table | 1.3.6.1.4.1.3052.43.1.1.1.1 | not-accessible | current | |
| esIndexES OBJECT-TYPE The part of the point index that refers to an EventSensor. The point index is a string of 3 numbers separated by periods. It contains all the information necessary for getting a piece of data off an event sensor; namely, which EventSensor, point class, and which-sensor-of-that-class (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors. The number corresponding to an EventSensor is determined by the user at the initial configuration time. If there is an internal sensor in the unit, it will always be the first item in the Sensor Events setup menu. For example, if a new EventSensor is configured as the 2nd entry AFTER the internal EventSensor (if one exists) in the Sensor Events Setup Menu, then that EventSensor will be known from then on as EventSensor 2. All point indeces with esIndexES=2 will now refer to that particular EventSensor. | 1.3.6.1.4.1.3052.43.1.1.1.1.1 | Integer32 (1..200) | read-only | current |
| esIndexPC OBJECT-TYPE The part of the point index that refers to point class. The point index is a string of 3 numbers separated by periods. It contains all the information necessary for getting a piece of data off an event sensor; namely, which EventSensor, point class, and which-sensor-of-that-class (a.k.a. point). The values for this object are: 1=temperature sensor 2=contact closure 3=humidity sensor 4=noise sensor 5=analog input 6=relay | 1.3.6.1.4.1.3052.43.1.1.1.1.2 | Integer32 (1..6) | read-only | current |
| esIndexPoint OBJECT-TYPE The part of the point index that delineates which sensor on the EventSensor. So this combined with esIndexPC (Point Class or type) and esIndexES (which EventSensor) uniquely defines each point (sensor or relay) attached to a unit. For example, if esIndexES is 3, esIndexPC is 1 and esIndexPoint is 4 then this is the Fourth Temperature Sensor on EventSensor number 3. | 1.3.6.1.4.1.3052.43.1.1.1.1.3 | Integer32 (1..64) | read-only | current |
| esPointName OBJECT-TYPE The name of the point on an EventSensor. For example, 'AC temp' (in the case of the temperature sensor on an EventSensor). There can be multiple points of the same point class on an EventSensor (e.g., 8 contact closures) and multiple sensor classes on an EventSensor (e.g., temperature, contact closure, humidity). If the point referenced by a given point index is solitary (e.g., temperature sensor, because there can be only one on an EventSensor), then this object reads as '<EventSensor name>'. Setting this object for solitary point indices sets the EventSensor name only. On the other hand, if a given point is among other points of the same point class on an EventSensor, then this object reads as '<Sensor name>'. Setting this object for these NON- solitary point indices sets the sensor name only - not the EventSensor name. | 1.3.6.1.4.1.3052.43.1.1.1.1.4 | DisplayString | read-write | current |
| esPointInEventState OBJECT-TYPE A number referring to the event state of a point on an EventSensor. This number can have different meanings depending on the point class. If the point class is temperature, humidity, or analog input, then the values of this object are: 1=very low 2=low 3=normal 4=high 5=very high For contact closures the values of this object are: 1=point in event state 2=point in normal state For relays the values of this object are: 1=relay energized (active) 2=relay de-energized (inactive) For any point class and any point, if the event state is undefined, then the value of this object is 0. For any point class except relay, this object is read-only. For relays, setting this object to 1 puts the relay into its active (energized) state. Setting it to 2 puts the relay into its inactive (de-energized) state. Setting it to any value greater than 2 puts the relay into its active state for that many seconds (up to 3600), after which time it puts the relay into its inactive state. | 1.3.6.1.4.1.3052.43.1.1.1.1.5 | Integer32 | read-write | current |
| esPointValueInt OBJECT-TYPE A read-only number referring to the value of a point on an EventSensor. If the point class is temperature, then this object is the temperature in its configured scale (default is Fahrenheit). If the point class is contact closure or relay, then this object is either 0 (open) or 1 (closed). If the point class is humidity, then this object is the percent relative humidity. If the point class is analog input, then this object is the signed input value in tenths of the configured units. If the point class is relay, then this object is either 1 (active a.k.a. energized) or 0 (inactive a.k.a. de-energized). This object cannot be used to control the relay (use esPointInEventState for that). | 1.3.6.1.4.1.3052.43.1.1.1.1.6 | Integer32 (-32768..32767) | read-write | current |
| esPointValueStr OBJECT-TYPE A string referring to the value of a point on an EventSensor. For contact closures this object is either 'Open' or 'Closed'. For relays this object is either 'Active' (energized) or 'Inactive' (de-energized). For temperature and humidity point classes, this object is the string representation of the esPointValueInt object. For temperature, 'C' or 'F' is including in the string to indicate scale. For analog inputs, this object is the string representation of the plus/minus input in the configured units appended with the unit name. | 1.3.6.1.4.1.3052.43.1.1.1.1.7 | DisplayString | read-only | current |
| config OBJECT-IDENTITY | 1.3.6.1.4.1.3052.43.2 | |||
| eventSensorPointConfig OBJECT-IDENTITY | 1.3.6.1.4.1.3052.43.2.2 | |||
| esPointConfigTempTable OBJECT-TYPE This table organizes 3 basic attributes of temperature sensor points. A point is a particular sensor on an EventSensor. The 3 point attributes organizes in this table are: 1. the configuration item (e.g., enable, name, etc.) 2. the eventsensor on which this point resides 3. the point number (always 1 for temp sensors) Points are referenced by a point config index. The point config index is a string of 2 numbers separated by periods. It contains all the information necessary for getting a piece of data off an event sensor within the context of this emperature point config table ; namely, which EventSensor, and which sensor (a.k.a. point) (always 1 for temperature sensors). | 1.3.6.1.4.1.3052.43.2.2.1 | not-accessible | current | |
| esPointConfigTempEntry OBJECT-TYPE Entry for EventSensor point config temperature table | 1.3.6.1.4.1.3052.43.2.2.1.1 | not-accessible | current | |
| espcTempIndexES OBJECT-TYPE The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the the context of the eventsensor point config temperature table; namely, which EventSensor, and which sensor (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors. The number corresponding to an EventSensor is determined by the user at the initial configuration time. If there is an internal sensor in the unit, it will always be the first item in the Sensor Events setup menu. For example, if a new EventSensor is configured as the 2nd entry AFTER the internal EventSensor (if one exists) in the Sensor Events Setup Menu, then that EventSensor will be known from then on as EventSensor 2. All point indeces with esIndexES=2 will now refer to that particular EventSensor. | 1.3.6.1.4.1.3052.43.2.2.1.1.1 | Integer32 (1..200) | read-only | current |
| espcTempIndexPoint OBJECT-TYPE The part of the point index that delineates which sensor on the EventSensor. So this combined with espcTempIndexES (which EventSensor) uniquely defines each point attached to a unit within the context of temperature point configuration. | 1.3.6.1.4.1.3052.43.2.2.1.1.2 | Integer32 (1..64) | read-only | current |
| espcTempEnable OBJECT-TYPE ON/OFF enable this temperature sensor | 1.3.6.1.4.1.3052.43.2.2.1.1.3 | DisplayString | read-write | current |
| espcTempName OBJECT-TYPE The name of this temperature sensor | 1.3.6.1.4.1.3052.43.2.2.1.1.4 | DisplayString | read-write | current |
| espcTempScale OBJECT-TYPE Scale (C/F) for this temperature sensor | 1.3.6.1.4.1.3052.43.2.2.1.1.5 | DisplayString | read-write | current |
| espcTempDeadband OBJECT-TYPE Deadband for this temperature sensor | 1.3.6.1.4.1.3052.43.2.2.1.1.6 | Integer32 | read-write | current |
| espcTempVHighTemp OBJECT-TYPE Very high temperature event threshold for this temperature sensor | 1.3.6.1.4.1.3052.43.2.2.1.1.7 | Integer32 | read-write | current |
| espcTempVHighClass OBJECT-TYPE Very high temperature event class for this temperature sensor | 1.3.6.1.4.1.3052.43.2.2.1.1.9 | DisplayString | read-write | current |
| espcTempHighTemp OBJECT-TYPE High temperature event threshold for this temperature sensor | 1.3.6.1.4.1.3052.43.2.2.1.1.10 | Integer32 | read-write | current |
| espcTempHighClass OBJECT-TYPE High temperature event class for this temperature sensor | 1.3.6.1.4.1.3052.43.2.2.1.1.13 | DisplayString | read-write | current |
| espcTempLowTemp OBJECT-TYPE Low temperature event threshold for this temperature sensor | 1.3.6.1.4.1.3052.43.2.2.1.1.17 | Integer32 | read-write | current |
| espcTempLowClass OBJECT-TYPE Low temperature event class for this temperature sensor | 1.3.6.1.4.1.3052.43.2.2.1.1.20 | DisplayString | read-write | current |
| espcTempVLowTemp OBJECT-TYPE Very Low temperature event threshold for this temperature sensor | 1.3.6.1.4.1.3052.43.2.2.1.1.21 | Integer32 | read-write | current |
| espcTempVLowClass OBJECT-TYPE Very Low temperature event class for this temperature sensor | 1.3.6.1.4.1.3052.43.2.2.1.1.24 | DisplayString | read-write | current |
| espcTempActions OBJECT-TYPE Temperature event Action | 1.3.6.1.4.1.3052.43.2.2.1.1.25 | DisplayString | read-write | current |
| esPointConfigCCTable OBJECT-TYPE This table organizes 3 basic attributes of contact closure points. A point is a particular sensor on an EventSensor. The 3 point attributes organizes in this table are: 1. the configuration item (e.g., enable, name, etc.) 2. the eventsensor on which this point resides 3. the point number Points are referenced by a point config index. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the context of this contact closure point config table ; namely, which EventSensor and which sensor. | 1.3.6.1.4.1.3052.43.2.2.2 | not-accessible | current | |
| esPointConfigCCEntry OBJECT-TYPE Entry for EventSensor point config contact closure table | 1.3.6.1.4.1.3052.43.2.2.2.1 | not-accessible | current | |
| espcCCIndexES OBJECT-TYPE The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the the context of the eventsensor point config contact closure table; namely, which EventSensor and which sensor (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors. | 1.3.6.1.4.1.3052.43.2.2.2.1.1 | Integer32 (1..200) | read-only | current |
| espcCCIndexPoint OBJECT-TYPE The part of the point index that delineates which sensor on the EventSensor. So this combined with espcCCIndexES (which EventSensor) uniquely defines each point attached to a unit within the context of contact closure point configuration. | 1.3.6.1.4.1.3052.43.2.2.2.1.2 | Integer32 (1..64) | read-only | current |
| espcCCEnable OBJECT-TYPE ON/OFF enable for this contact closure | 1.3.6.1.4.1.3052.43.2.2.2.1.3 | DisplayString | read-write | current |
| espcCCName OBJECT-TYPE Name for this contact closure | 1.3.6.1.4.1.3052.43.2.2.2.1.4 | DisplayString | read-write | current |
| espcCCEventState OBJECT-TYPE Event state for this contact closure | 1.3.6.1.4.1.3052.43.2.2.2.1.5 | DisplayString | read-write | current |
| espcCCThreshold OBJECT-TYPE Threshold (seconds) for this contact closure | 1.3.6.1.4.1.3052.43.2.2.2.1.6 | Integer32 | read-write | current |
| espcCCActions OBJECT-TYPE Event class for this contact closure | 1.3.6.1.4.1.3052.43.2.2.2.1.7 | DisplayString | read-write | current |
| espcCCEventClass OBJECT-TYPE Event class for this contact closure | 1.3.6.1.4.1.3052.43.2.2.2.1.9 | DisplayString | read-write | current |
| espcCCNormalClass OBJECT-TYPE Return-to-normal class for this contact closure | 1.3.6.1.4.1.3052.43.2.2.2.1.12 | DisplayString | read-write | current |
| espcCCAlarmAlias OBJECT-TYPE Event alias for this contact closure | 1.3.6.1.4.1.3052.43.2.2.2.1.13 | DisplayString | read-write | current |
| espcCCNormalAlias OBJECT-TYPE Return-to-normal alias for this contact closure | 1.3.6.1.4.1.3052.43.2.2.2.1.14 | DisplayString | read-write | current |
| esPointConfigHumidTable OBJECT-TYPE This table organizes 3 basic attributes of humidity points. A point is a particular sensor on an EventSensor. The 3 point attributes organizes in this table are: 1. the configuration item (e.g., enable, name, etc.) 2. the eventsensor on which this point resides 3. the point number (always 1 for humidity sensors) Points are referenced by a point config index. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the context of this humidity point config table ; namely, which EventSensor and which sensor. | 1.3.6.1.4.1.3052.43.2.2.3 | not-accessible | current | |
| esPointConfigHumidEntry OBJECT-TYPE Entry for EventSensor point config humidity table | 1.3.6.1.4.1.3052.43.2.2.3.1 | not-accessible | current | |
| espcHumidIndexES OBJECT-TYPE The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the the context of the eventsensor point config contact closure table; namely, which EventSensor and which sensor (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors. | 1.3.6.1.4.1.3052.43.2.2.3.1.1 | Integer32 (1..200) | read-only | current |
| espcHumidIndexPoint OBJECT-TYPE The part of the point index that delineates which sensor on the EventSensor. So this combined with espcHumidIndexES (which EventSensor) uniquely defines each point attached to a unit within the context of contact closure point configuration. | 1.3.6.1.4.1.3052.43.2.2.3.1.2 | Integer32 (1..64) | read-only | current |
| espcHumidEnable OBJECT-TYPE ON/OFF enable for this humidity sensor | 1.3.6.1.4.1.3052.43.2.2.3.1.3 | DisplayString | read-write | current |
| espcHumidName OBJECT-TYPE The name for this humidity sensor | 1.3.6.1.4.1.3052.43.2.2.3.1.4 | DisplayString | read-write | current |
| espcHumidDeadband OBJECT-TYPE Deadband for this humidity sensor | 1.3.6.1.4.1.3052.43.2.2.3.1.5 | Integer32 | read-write | current |
| espcHumidVHighHumid OBJECT-TYPE Very high event threshold for this humidity sensor | 1.3.6.1.4.1.3052.43.2.2.3.1.6 | Integer32 | read-write | current |
| espcHumidVHighClass OBJECT-TYPE Very high event class for this humidity sensor | 1.3.6.1.4.1.3052.43.2.2.3.1.8 | DisplayString | read-write | current |
| espcHumidHighHumid OBJECT-TYPE High event threshold for this humidity sensor | 1.3.6.1.4.1.3052.43.2.2.3.1.9 | Integer32 | read-write | current |
| espcHumidHighClass OBJECT-TYPE High event class for this humidity sensor | 1.3.6.1.4.1.3052.43.2.2.3.1.12 | DisplayString | read-write | current |
| espcHumidLowHumid OBJECT-TYPE Low event threshold for this humidity sensor | 1.3.6.1.4.1.3052.43.2.2.3.1.16 | Integer32 | read-write | current |
| espcHumidLowClass OBJECT-TYPE Low event class for this humidity sensor | 1.3.6.1.4.1.3052.43.2.2.3.1.19 | DisplayString | read-write | current |
| espcHumidVLowHumid OBJECT-TYPE Very low event threshold for this humidity sensor | 1.3.6.1.4.1.3052.43.2.2.3.1.20 | Integer32 | read-write | current |
| espcHumidVLowClass OBJECT-TYPE Very low event class for this humidity sensor | 1.3.6.1.4.1.3052.43.2.2.3.1.23 | DisplayString | read-write | current |
| espcHumidActions OBJECT-TYPE Humidity event actions for this humidity sensor | 1.3.6.1.4.1.3052.43.2.2.3.1.24 | DisplayString | read-write | current |
| esPointConfigAITable OBJECT-TYPE This table organizes 3 basic attributes of analog input points. A point is a particular sensor on an EventSensor. The 3 point attributes organizes in this table are: 1. the configuration item (e.g., enable, name, etc.) 2. the eventsensor on which this point resides 3. the point number Points are referenced by a point config index. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the context of this analog input point config table ; namely, which EventSensor and which sensor. | 1.3.6.1.4.1.3052.43.2.2.5 | not-accessible | current | |
| esPointConfigAIEntry OBJECT-TYPE Entry for EventSensor point config analog input table | 1.3.6.1.4.1.3052.43.2.2.5.1 | not-accessible | current | |
| espcAIIndexES OBJECT-TYPE The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the the context of the eventsensor point config contact closure table; namely, which EventSensor and which sensor (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors. | 1.3.6.1.4.1.3052.43.2.2.5.1.1 | Integer32 (1..200) | read-only | current |
| espcAIIndexPoint OBJECT-TYPE The part of the point index that delineates which sensor on the EventSensor. So this combined with espcAIIndexES (which EventSensor) uniquely defines each point attached to a unit within the context of contact closure point configuration. | 1.3.6.1.4.1.3052.43.2.2.5.1.2 | Integer32 (1..64) | read-only | current |
| espcAIEnable OBJECT-TYPE ON/OFF for this analog input sensor | 1.3.6.1.4.1.3052.43.2.2.5.1.3 | DisplayString | read-write | current |
| espcAIName OBJECT-TYPE Name for this analog input sensor | 1.3.6.1.4.1.3052.43.2.2.5.1.4 | DisplayString | read-write | current |
| espcAIDeadband OBJECT-TYPE Deadband for this analog input sensor | 1.3.6.1.4.1.3052.43.2.2.5.1.5 | Integer32 | read-write | current |
| espcAIVhighValue OBJECT-TYPE Very high event threshold (decivolts or tenths of milliamps) for this analog input sensor | 1.3.6.1.4.1.3052.43.2.2.5.1.6 | Integer32 | read-write | current |
| espcAIVhighClass OBJECT-TYPE Very high event class for this analog input sensor | 1.3.6.1.4.1.3052.43.2.2.5.1.8 | DisplayString | read-write | current |
| espcAIHighValue OBJECT-TYPE High event threshold (decivolts or tenths of milliamps) for this analog input sensor | 1.3.6.1.4.1.3052.43.2.2.5.1.9 | Integer32 | read-write | current |
| espcAIHighClass OBJECT-TYPE High event class for this analog input sensor | 1.3.6.1.4.1.3052.43.2.2.5.1.12 | DisplayString | read-write | current |
| espcAILowValue OBJECT-TYPE Low event threshold (decivolts or tenths of milliamps) for this analog input sensor | 1.3.6.1.4.1.3052.43.2.2.5.1.16 | Integer32 | read-write | current |
| espcAILowClass OBJECT-TYPE Low event class for this analog input sensor | 1.3.6.1.4.1.3052.43.2.2.5.1.19 | DisplayString | read-write | current |
| espcAIVlowValue OBJECT-TYPE Very low event threshold (decivolts or tenths of milliamps) for this analog input sensor | 1.3.6.1.4.1.3052.43.2.2.5.1.20 | Integer32 | read-write | current |
| espcAIVlowClass OBJECT-TYPE Very low event class for this analog input sensor | 1.3.6.1.4.1.3052.43.2.2.5.1.23 | DisplayString | read-write | current |
| espcAIActions OBJECT-TYPE Event actions for this analog input sensor | 1.3.6.1.4.1.3052.43.2.2.5.1.24 | DisplayString | read-write | current |
| espcAIConvUnitName OBJECT-TYPE Conversion unit name for this analog input sensor | 1.3.6.1.4.1.3052.43.2.2.5.1.25 | DisplayString | read-write | current |
| espcAIConvLowValue OBJECT-TYPE Conversion low value for this analog input sensor | 1.3.6.1.4.1.3052.43.2.2.5.1.26 | Integer32 | read-write | current |
| espcAIConvLowUnit OBJECT-TYPE Conversion low unit value for this analog input sensor | 1.3.6.1.4.1.3052.43.2.2.5.1.27 | Integer32 | read-write | current |
| espcAIConvHighValue OBJECT-TYPE Conversion high value for this analog input sensor | 1.3.6.1.4.1.3052.43.2.2.5.1.28 | Integer32 | read-write | current |
| espcAIConvHighUnit OBJECT-TYPE Conversion high unit value for this analog input sensor | 1.3.6.1.4.1.3052.43.2.2.5.1.29 | Integer32 | read-write | current |
| esPointConfigRelayTable OBJECT-TYPE This table organizes 3 basic attributes of relay points. A point is a particular sensor on an EventSensor. The 3 point attributes organizes in this table are: 1. the configuration item (e.g., enable, name, etc.) 2. the eventsensor on which this point resides 3. the point number Points are referenced by a point config index. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the context of this relay point config table ; namely, which EventSensor and which sensor. | 1.3.6.1.4.1.3052.43.2.2.6 | not-accessible | current | |
| esPointConfigRelayEntry OBJECT-TYPE Entry for EventSensor point config relay table | 1.3.6.1.4.1.3052.43.2.2.6.1 | not-accessible | current | |
| espcRelayIndexES OBJECT-TYPE The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the the context of the eventsensor point config relay table; namely, which EventSensor and which sensor (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors. | 1.3.6.1.4.1.3052.43.2.2.6.1.1 | Integer32 (1..200) | read-only | current |
| espcRelayIndexPoint OBJECT-TYPE The part of the point index that delineates which sensor on the EventSensor. So this combined with espcRelayIndexES (which EventSensor) uniquely defines each point attached to a unit within the context of relay point configuration. | 1.3.6.1.4.1.3052.43.2.2.6.1.2 | Integer32 (1..64) | read-only | current |
| espcRelayEnable OBJECT-TYPE ON/OFF enable for this relay | 1.3.6.1.4.1.3052.43.2.2.6.1.3 | DisplayString | read-write | current |
| espcRelayName OBJECT-TYPE Name for this relay | 1.3.6.1.4.1.3052.43.2.2.6.1.4 | DisplayString | read-write | current |
| network OBJECT-IDENTITY | 1.3.6.1.4.1.3052.43.2.4 | |||
| ethernet OBJECT-IDENTITY | 1.3.6.1.4.1.3052.43.2.4.1 | |||
| ipAddress OBJECT-TYPE Ethernet IP address | 1.3.6.1.4.1.3052.43.2.4.1.1 | IpAddress | read-write | current |
| subnetMask OBJECT-TYPE Ethernet subnet mask | 1.3.6.1.4.1.3052.43.2.4.1.2 | IpAddress | read-write | current |
| router OBJECT-TYPE Ethernet router | 1.3.6.1.4.1.3052.43.2.4.1.3 | IpAddress | read-write | current |
| snmp OBJECT-IDENTITY | 1.3.6.1.4.1.3052.43.2.4.8 | |||
| snmpReadCommunity OBJECT-TYPE SNMP read community | 1.3.6.1.4.1.3052.43.2.4.8.2 | DisplayString | read-write | current |
| snmpWriteCommunity OBJECT-TYPE SNMP write community | 1.3.6.1.4.1.3052.43.2.4.8.3 | DisplayString | read-write | current |
| snmpTrapCommunity OBJECT-TYPE SNMP trap community | 1.3.6.1.4.1.3052.43.2.4.8.4 | DisplayString | read-write | current |
| snmpServerTable OBJECT-TYPE Table of network hosts to use for network-based actions | 1.3.6.1.4.1.3052.43.2.4.8.6 | not-accessible | current | |
| snmpServerEntry OBJECT-TYPE Entry for table of network hosts to use for network-based actions | 1.3.6.1.4.1.3052.43.2.4.8.6.1 | not-accessible | current | |
| snmpServerIndex OBJECT-TYPE Index for table of network hosts to use for network-based actions | 1.3.6.1.4.1.3052.43.2.4.8.6.1.1 | Integer32 (1..6) | read-only | current |
| snmpServer OBJECT-TYPE Hostname/IP address used as destination for network-based action (e.g., trap) | 1.3.6.1.4.1.3052.43.2.4.8.6.1.2 | IpAddress | read-write | current |
| snmpTestTrap OBJECT-TYPE SNMP trap community | 1.3.6.1.4.1.3052.43.2.4.8.7 | DisplayString | read-write | current |
| email OBJECT-IDENTITY | 1.3.6.1.4.1.3052.43.2.4.17 | |||
| emailServer OBJECT-TYPE SMTP server to which the unit sends email | 1.3.6.1.4.1.3052.43.2.4.17.1 | IpAddress | read-write | current |
| emailDomain OBJECT-TYPE Domain to use in recipient address | 1.3.6.1.4.1.3052.43.2.4.17.2 | DisplayString | read-write | current |
| emailAuthEnable OBJECT-TYPE ON/OFF enable SMTP authentication | 1.3.6.1.4.1.3052.43.2.4.17.3 | DisplayString | read-write | current |
| emailAuthUsername OBJECT-TYPE Username for SMTP authentication | 1.3.6.1.4.1.3052.43.2.4.17.4 | DisplayString | read-write | current |
| emailAuthPassword OBJECT-TYPE Password for SMTP authentication | 1.3.6.1.4.1.3052.43.2.4.17.5 | DisplayString | read-write | current |
| emailTable OBJECT-TYPE Table of email addresses to use for email actions | 1.3.6.1.4.1.3052.43.2.4.17.6 | not-accessible | current | |
| emailEntry OBJECT-TYPE Entry for table of email addresses to use for email actions | 1.3.6.1.4.1.3052.43.2.4.17.6.1 | not-accessible | current | |
| emailIndex OBJECT-TYPE Index for table of email addresses to use for email actions | 1.3.6.1.4.1.3052.43.2.4.17.6.1.1 | Integer32 (1..6) | read-only | current |
| emailAddress OBJECT-TYPE email address | 1.3.6.1.4.1.3052.43.2.4.17.6.1.2 | DisplayString | read-write | current |
| emailTestMail OBJECT-TYPE Password for SMTP authentication | 1.3.6.1.4.1.3052.43.2.4.17.7 | DisplayString | read-write | current |
| dateTime OBJECT-IDENTITY | 1.3.6.1.4.1.3052.43.2.8 | |||
| date OBJECT-TYPE Text string for date. | 1.3.6.1.4.1.3052.43.2.8.1 | DisplayString | read-write | current |
| time OBJECT-TYPE Text string for time. | 1.3.6.1.4.1.3052.43.2.8.2 | DisplayString | read-write | current |
| autodst OBJECT-TYPE ON/OFF automatically adjust for Daylight Savings Time | 1.3.6.1.4.1.3052.43.2.8.3 | DisplayString | read-write | current |
| action OBJECT-IDENTITY | 1.3.6.1.4.1.3052.43.2.14 | |||
| actionSystemAlertAction OBJECT-TYPE System Alert Actions are actions that occur when the system needs to alert the user of something. The only time this occurs currently is a powerup alert. | 1.3.6.1.4.1.3052.43.2.14.1 | DisplayString | read-write | current |
| actionPowerupAlertEnable OBJECT-TYPE action Powerup Alert Enable | 1.3.6.1.4.1.3052.43.2.14.2 | DisplayString | read-write | current |
| actionRTNAlertsEnable OBJECT-TYPE Return to Normal Alerts Enabled | 1.3.6.1.4.1.3052.43.2.14.3 | DisplayString | read-write | current |
| actionAlarmRepeatFrequency OBJECT-TYPE Frequency in minutes of repeats | 1.3.6.1.4.1.3052.43.2.14.4 | Integer32 | read-write | current |
| sys OBJECT-IDENTITY | 1.3.6.1.4.1.3052.43.2.16 | |||
| sysSerial OBJECT-TYPE Serial Number | 1.3.6.1.4.1.3052.43.2.16.1 | DisplayString | read-write | current |
| sysVersion OBJECT-TYPE Serial Number | 1.3.6.1.4.1.3052.43.2.16.2 | DisplayString | read-write | current |
| sysBuild OBJECT-TYPE Serial Number | 1.3.6.1.4.1.3052.43.2.16.3 | DisplayString | read-write | current |
| sysSitename OBJECT-TYPE Serial Number | 1.3.6.1.4.1.3052.43.2.16.4 | DisplayString | read-write | current |
| sysProduct OBJECT-TYPE Serial Number | 1.3.6.1.4.1.3052.43.2.16.5 | DisplayString | read-write | current |
| thisTrapText OBJECT-TYPE A text string included in all traps | 1.3.6.1.4.1.3052.43.2.16.6 | DisplayString | read-write | current |
Notifications
| Name | OID | Status |
|---|---|---|
| s220PowerUpTrap NOTIFICATION-TYPE Sent upon System Alert at power up. | 1.3.6.1.4.1.3052.43.20000 | current |
| s220ContactTrap NOTIFICATION-TYPE Sent to show a contact is in the alarm state. | 1.3.6.1.4.1.3052.43.20001 | current |
| s220TempTrap NOTIFICATION-TYPE Sent to show temperature exceeded threshold. | 1.3.6.1.4.1.3052.43.20010 | current |
| s220HumidTrap NOTIFICATION-TYPE Sent to show humidity exceeded threshold | 1.3.6.1.4.1.3052.43.20020 | current |
| s220TestTrap NOTIFICATION-TYPE Sent to test IP route(s) for traps. | 1.3.6.1.4.1.3052.43.22000 | current |