MIBs Depot

SIAE-LLF-MIB

Registered at
1.3.6.1.4.1.3373.1103.85
Last updated
2014-09-02 00:00
Organization
SIAE MICROELETTRONICA spa
Namespace
siae
Source file
SIAE-LLF-MIB
Digest
sha256:fb94d6dfadf568e156e5755333b82683ab4fa7cd117a3206859d9db77177fd0a

Description

SIAE's Link Loss Forwarding MIB.

Contact

SIAE MICROELETTONICA s.p.a. Via Michelangelo Buonarroti, 21 20093 - Cologno Monzese Milano - ITALY Phone : +39-02-27325-1 E-mail: tbd@siaemic.com

Imports

FromSymbols
IF-MIBInterfaceIndex
SIAE-ALARM-MIBAlarmSeverityCode, AlarmStatus
SIAE-TREE-MIBsiaeMib
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
SIAE-ALARM-MIB
SIAE-LLF-MIB
SIAE-TREE-MIB
SIAE-USER-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
llfMibVersion
OBJECT-TYPE
Numerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01.
1.3.6.1.4.1.3373.1103.85.1INTEGERread-onlycurrent
llfTable
OBJECT-TYPE
Table with SIAE's LLF entries.
1.3.6.1.4.1.3373.1103.85.2not-accessiblecurrent
llfEntry
OBJECT-TYPE
SIAE's LLF entry.
1.3.6.1.4.1.3373.1103.85.2.1not-accessiblecurrent
llfIndex
OBJECT-TYPE
A unique value, greater than zero, for each interface supporting LLF. This object is identical to the ifIndex of the standard MIB-2 ifTable.
1.3.6.1.4.1.3373.1103.85.2.1.1InterfaceIndexnot-accessiblecurrent
llfEnable
OBJECT-TYPE
On interfaces supporting LLF, this object is used to disable or enable LLF towards local LAN interfaces.
1.3.6.1.4.1.3373.1103.85.2.1.2INTEGER {disable(1), enable(2)}read-createcurrent
llfUnidirectionalFault
OBJECT-TYPE
When enable is set, a local link fault causes LLF on both local and remote interfaces.
1.3.6.1.4.1.3373.1103.85.2.1.3INTEGER {disable(1), enable(2)}read-createcurrent
llfDelayTime
OBJECT-TYPE
The LLF delay time specifies the time interval (in seconds) to wait for to actuate or to remove the Link Loss Forwarding condition.
1.3.6.1.4.1.3373.1103.85.2.1.4INTEGER (0..10)read-createcurrent
llfProtectionMode
OBJECT-TYPE
When protection mode is enabled, LLF alarm is issued only when all radio links or circuits connected to interface are alarmed.
1.3.6.1.4.1.3373.1103.85.2.1.5INTEGER {disable(1), enable(2)}read-createcurrent
llfAlarm
OBJECT-TYPE
Interface Link Loss Forwarding alarm status.
1.3.6.1.4.1.3373.1103.85.2.1.6AlarmStatusread-onlycurrent
llfRowStatus
OBJECT-TYPE
Status of this row of llfTable. This object may not be set to destroy until at least a circuit belong to this LLF interface. In other words, circuits must be deleted before a LLF interface.
1.3.6.1.4.1.3373.1103.85.2.1.7RowStatusread-createcurrent
llfMapTable
OBJECT-TYPE
This table map llf interface on llf circuits.
1.3.6.1.4.1.3373.1103.85.3not-accessiblecurrent
llfMapEntry
OBJECT-TYPE
SIAE's llf cross-connection entry.
1.3.6.1.4.1.3373.1103.85.3.1not-accessiblecurrent
llfMapLinkIndex
OBJECT-TYPE
Radio link identifier. With llfMapPolIndex and llfMapCircuitIndex it points to a specific instance of llfCircuitTable.
1.3.6.1.4.1.3373.1103.85.3.1.1INTEGERread-onlycurrent
llfMapPolIndex
OBJECT-TYPE
Radio polarization identifier. With llfMapLinkIndex and llfMapCircuitIndex it points to a specific instance of llfCircuitTable.
1.3.6.1.4.1.3373.1103.85.3.1.2INTEGERread-onlycurrent
llfMapCircuitIndex
OBJECT-TYPE
LLF circuit identifier. With llfMapLinkIndex and llfMapPolIndex it points to a specific instance of llfCircuitTable.
1.3.6.1.4.1.3373.1103.85.3.1.3INTEGERread-onlycurrent
llfMapLosInsertion
OBJECT-TYPE
Enable or disable insertion of interface LOS into a specified circuit. The inserted LOS is transported through the radio link.
1.3.6.1.4.1.3373.1103.85.3.1.4INTEGER {disable(1), enable(2)}read-createcurrent
llfMapInsertionMode
OBJECT-TYPE
In single mode, LOS is inserted in the circuit if the relative interface has a LOS alarm. In group mode, LOS is inserted when all (grouped) interfaces mapped to the same circuit have a LOS alarm.
1.3.6.1.4.1.3373.1103.85.3.1.5INTEGER {single(1), group(2)}read-createcurrent
llfMapSignalFail
OBJECT-TYPE
Alarm condition detected on specified circuit.
1.3.6.1.4.1.3373.1103.85.3.1.6TruthValueread-onlycurrent
llfMapRowStatus
OBJECT-TYPE
Status of this row of llfMapTable
1.3.6.1.4.1.3373.1103.85.3.1.7RowStatusread-createcurrent
llfCircuitTable
OBJECT-TYPE
Table describing llf circuits available over each link. This circuits can be connected to available interfaces via llfMapTable.
1.3.6.1.4.1.3373.1103.85.4not-accessiblecurrent
llfCircuitEntry
OBJECT-TYPE
SIAE's llf circuit entry.
1.3.6.1.4.1.3373.1103.85.4.1not-accessiblecurrent
llfCircuitLinkIndex
OBJECT-TYPE
Radio link identifier.
1.3.6.1.4.1.3373.1103.85.4.1.1INTEGERread-onlycurrent
llfCircuitPolIndex
OBJECT-TYPE
Radio polarization identifier.
1.3.6.1.4.1.3373.1103.85.4.1.2INTEGERread-onlycurrent
llfCircuitIndex
OBJECT-TYPE
LLF circuit identifier.
1.3.6.1.4.1.3373.1103.85.4.1.3INTEGERread-onlycurrent
llfCircuitLinkLabel
OBJECT-TYPE
ASCII string used to assign a name to the radio link and polarization.
1.3.6.1.4.1.3373.1103.85.4.1.4DisplayString (SIZE(0..32))read-onlycurrent
llfCircuitRowStatus
OBJECT-TYPE
Status of this row of llfCircuitTable
1.3.6.1.4.1.3373.1103.85.4.1.5RowStatusread-createcurrent
llfAlarmSeverityCode
OBJECT-TYPE
Defines the severity associated to the llfAlarm and enables/disables the trap generation on status change event.
1.3.6.1.4.1.3373.1103.85.5AlarmSeverityCoderead-writecurrent