MIBs Depot

SENAO-WLAN-CB-MIB

Namespace
senao
Source file
SENAO-WLAN-CB-MIB
Digest
sha256:7d4a6a33e3e89b106fb8e8584a16b240f380ced1c07b889dd697b83e332a6643

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, enterprises, iso, mgmt
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

SENAO-WLAN-CB-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
senaoMIB
OBJECT-IDENTITY
1.3.6.1.4.1.14125
senaoRFC1213Group
OBJECT-IDENTITY
1.3.6.1.4.1.14125.1
ip
OBJECT-IDENTITY
1.3.6.1.4.1.14125.1.1
ipInReceives
OBJECT-TYPE
The total number of input datagrams received from interfaces, including those received in error. @GET-FUNC=get_ip_row
1.3.6.1.4.1.14125.1.1.1Counterread-onlymandatory
ipForwDatagrams
OBJECT-TYPE
The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful. @GET-FUNC=get_ip_row
1.3.6.1.4.1.14125.1.1.2Counterread-onlymandatory
icmp
OBJECT-IDENTITY
1.3.6.1.4.1.14125.1.2
icmpInMsgs
OBJECT-TYPE
The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors. @GET-FUNC=get_icmp_row
1.3.6.1.4.1.14125.1.2.1Counterread-onlymandatory
icmpOutMsgs
OBJECT-TYPE
The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors. @GET-FUNC=get_icmp_row
1.3.6.1.4.1.14125.1.2.2Counterread-onlymandatory
tcp
OBJECT-IDENTITY
1.3.6.1.4.1.14125.1.3
tcpInSegs
OBJECT-TYPE
The total number of segments received, including those received in error. This count includes segments received on currently established connections. @GET-FUNC=get_tcp_row
1.3.6.1.4.1.14125.1.3.1Counterread-onlymandatory
tcpOutSegs
OBJECT-TYPE
The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets. @GET-FUNC=get_tcp_row
1.3.6.1.4.1.14125.1.3.2Counterread-onlymandatory
udp
OBJECT-IDENTITY
1.3.6.1.4.1.14125.1.4
udpInDatagrams
OBJECT-TYPE
The total number of UDP datagrams delivered to UDP users. @GET-FUNC=get_udp_row
1.3.6.1.4.1.14125.1.4.1Counterread-onlymandatory
udpOutDatagrams
OBJECT-TYPE
The total number of UDP datagrams sent from this entity. @GET-FUNC=get_udp_row
1.3.6.1.4.1.14125.1.4.2Counterread-onlymandatory
statusInformationGroup
OBJECT-IDENTITY
1.3.6.1.4.1.14125.2
connectedToSSID
OBJECT-TYPE
This attribute reflects the Service Set ID. This value may be modified by an external management entity and used by the local SME to make decisions about the Scanning process. The connectedToSSID length is limit between 1~ 32 characters. @GET-FUNC=get_statusInfo_group @SET-FUNC=set_statusInfo_group
1.3.6.1.4.1.14125.2.1DisplayStringread-writemandatory
usingChannel
OBJECT-TYPE
The operating frequency channel. Valid numbers are as defind in ISO/IEC 8802-11:1999, 15.4.6.2. @GET-FUNC=get_statusInfo_group
1.3.6.1.4.1.14125.2.2INTEGER {channel1(1), channel2(2), channel3(3), channel4(4), channel5(5), channel6(6), channel7(7), channel8(8), channel9(9), channel10(10), channel11(11)}read-onlymandatory
clientBridgeMACAddress
OBJECT-TYPE
The purpose of clientBridgeMACAddress is to allow a manager to identify a station for its own purposes. This attribute provides for that eventuality while keeping the true MAC address independent. Its syntax is MAC address and default value is the station's assigned, unique MAC address. @GET-FUNC=get_statusInfo_group
1.3.6.1.4.1.14125.2.3PhysAddressread-onlymandatory
currentIPAddress
OBJECT-TYPE
The IP address of this device used over its Ethernet interface in Routing mode or Bridge interface in Bridgeing mode. @GET-FUNC=get_statusInfo_group
1.3.6.1.4.1.14125.2.4IpAddressread-onlymandatory
linkUpIndicator
OBJECT-TYPE
The operated state of the wireless interface. The onLine(1) state indicates that this device connected to Access Point. @GET-FUNC=get_statusInfo_group
1.3.6.1.4.1.14125.2.5INTEGERread-onlymandatory
clientSignalStrength
OBJECT-TYPE
A device-dependent measure of the signal strength(%) of the most recently received packet from this Station. @GET-FUNC=get_statusInfo_group
1.3.6.1.4.1.14125.2.6INTEGER (0..100)read-onlymandatory
clientAssociationTime
OBJECT-TYPE
The time since this device connected to Access Point. @GET-FUNC=get_statusInfo_group
1.3.6.1.4.1.14125.2.7TimeTicksread-onlymandatory
currentTXPower
OBJECT-TYPE
The Transmit Power of this device used. @GET-FUNC=get_statusInfo_group @SET-FUNC=set_statusInfo_group
1.3.6.1.4.1.14125.2.8INTEGER {high(1), medium(2), low(3)}read-writemandatory
countersGroup
OBJECT-IDENTITY
1.3.6.1.4.1.14125.3
receivedPacketsGoodCount
OBJECT-TYPE
The number of good packets received on the radio interface, including unicast, broadcast and multicast packets. @GET-FUNC=get_counters_group
1.3.6.1.4.1.14125.3.1Counterread-onlymandatory
receivedPacketsBadCount
OBJECT-TYPE
The number of inbound bad packets of the radio interface were chosen to be discarded even though no errors had been detected to prevent their being received. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live. @GET-FUNC=get_counters_group
1.3.6.1.4.1.14125.3.2Counterread-onlymandatory
sendPacketsGoodCount
OBJECT-TYPE
The number of good packets transmitted on the radio interface, including unicast, broadcast and multicast packets. @GET-FUNC=get_counters_group
1.3.6.1.4.1.14125.3.3Counterread-onlymandatory
sendPacketsBadCount
OBJECT-TYPE
The number of outbound bad packets of the radio interface were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live. @GET-FUNC=get_counters_group
1.3.6.1.4.1.14125.3.4Counterread-onlymandatory
privacySettingsGroup
OBJECT-IDENTITY
1.3.6.1.4.1.14125.4
wepEnabled
OBJECT-TYPE
When this attribute is enable, it shall indicate that the IEEE 802.11 WEP mechanism is used for transmitting frames of type Data. The default value of this attribute shall be disable. @GET-FUNC=get_privacy_group @SET-FUNC=set_privacy_group
1.3.6.1.4.1.14125.4.1INTEGER {disable(1), enable(2)}read-writemandatory
wepKeyLength
OBJECT-TYPE
The length of WEP key that is used for transmitting and received frames of type Data. The value of 0 denotes WEP64bit Hex. Key; 1 stands for WEP128bit Hex. Key @GET-FUNC=get_privacy_group @SET-FUNC=set_privacy_group
1.3.6.1.4.1.14125.4.2INTEGER {key-64bits(1), key-128bits(2)}read-writemandatory
wepKeyNumber
OBJECT-TYPE
This attribute shall indicate the use of the first, second, third, or fourth element of the WEPDefaultKeys array when set to values of 1, 2, 3, or 4. The default value of this attribute shall be 0. @GET-FUNC=get_privacy_group @SET-FUNC=set_privacy_group
1.3.6.1.4.1.14125.4.3INTEGER {wep-key1(1), wep-key2(2), wep-key3(3), wep-key4(4)}read-writemandatory
wepKey
OBJECT-TYPE
A WEP secret key value. 10 Hex. Keys for WEP 64Bits/26 Hex. Keys for WEP128Bits. @GET-FUNC=get_privacy_group @SET-FUNC=set_privacy_group
1.3.6.1.4.1.14125.4.4DisplayStringread-writemandatory
systemSettingsGroup
OBJECT-IDENTITY
1.3.6.1.4.1.14125.5
operationMode
OBJECT-TYPE
This defines the type of role of a wireless device. The device types are: Bridge(1) -- Bridge AP+WDS(2) -- Access Point+WDS @GET-FUNC=get_system_group
1.3.6.1.4.1.14125.5.1INTEGER {bridge(1), ap-wds(2)}read-onlymandatory
ipAddress
OBJECT-TYPE
The IP address of this device used over its Ethernet interface in CB mode. The IP address must NOT set [x.x.x.0] or [x,x.x.255]. @GET-FUNC=get_system_group @SET-FUNC=set_system_group
1.3.6.1.4.1.14125.5.2IpAddressread-writemandatory
subnetMask
OBJECT-TYPE
The IP Network mask used by the IP entity when accessing devices through any of its Ethernet interface in Routing mode or Bridge interface in Bridgeing mode. The value of subnet mask must set to 0, 128, 192, 224, 240, 248, 252, 254, 255. @GET-FUNC=get_system_group @SET-FUNC=set_system_group
1.3.6.1.4.1.14125.5.3IpAddressread-writemandatory
ipGateway
OBJECT-TYPE
The IP address of this device's Gateway. The value of IP Gateway must NOT set to 0 or 255 @GET-FUNC=get_system_group @SET-FUNC=set_system_group
1.3.6.1.4.1.14125.5.4IpAddressread-writemandatory
deviceName
OBJECT-TYPE
The description name of this device. The deviceName length is limit between 1~32 characters. @GET-FUNC=get_system_group @SET-FUNC=set_system_group
1.3.6.1.4.1.14125.5.5DisplayStringread-writemandatory
saveReboot
OBJECT-TYPE
Save and Reboot System The save Reboot value must set to 1 when you enable this function. @GET-FUNC=get_system_group @SET-FUNC=set_system_group
1.3.6.1.4.1.14125.5.6INTEGERread-writemandatory
webAdministratorSettingsGroup
OBJECT-IDENTITY
1.3.6.1.4.1.14125.6
userName
OBJECT-TYPE
User Name assigned to the system for use when authenticating with Web browser. The username length limit is 15 characters. @GET-FUNC=get_webAdmin_group @SET-FUNC=set_webAdmin_group
1.3.6.1.4.1.14125.6.1DisplayStringread-writemandatory
password
OBJECT-TYPE
User Password assigned to the system for use when authenticating with Web browser. The password length limit is 15 characters. @GET-FUNC=get_webAdmin_group @SET-FUNC=set_webAdmin_group
1.3.6.1.4.1.14125.6.2DisplayStringread-writemandatory