MIBs Depot

SAF-INTEGRAX-MIB

Registered at
1.3.6.1.4.1.7571.100.1.1.7.10
Last updated
2020-06-26 00:00
Organization
SAF Tehnika
Revisions
2020-06-26 00:00, 2020-05-19 00:00, 2020-05-08 00:00, 2020-01-14 00:00, 2019-11-27 00:00, 2019-06-11 00:00, 2019-04-23 00:00, 2019-03-07 00:00, 2019-03-06 00:00, 2019-02-17 00:00
Namespace
saf
Source file
SAF-INTEGRAX-MIB
Digest
sha256:c374a2bb4efc0d39a79fd543b0b62d937cb3468e15880ed7c6a9259241ccf880

Description

SAF Integra-X device management base

Contact

SAF Tehnika technical support <techsupport@saftehnika.com>

Imports

FromSymbols
IANAifType-MIBIANAifType
SAF-ENTERPRISEpointToPoint
SAF-INTEGRA-MIBsafIntegra
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso
SNMPv2-TCDateAndTime, DisplayString, PhysAddress, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
SAF-ENTERPRISE
SAF-INTEGRA-MIB
SAF-INTEGRAX-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
FixedDiv10
TEXTUAL-CONVENTION
Fixed point, two decimals
current
FixedDiv20
TEXTUAL-CONVENTION
Fixed point, two decimals
current

Objects

NameOIDSyntaxAccessStatus
integraXtimestamp
OBJECT-TYPE
Last data update time
1.3.6.1.4.1.7571.100.1.1.7.10.1DateAndTimeread-onlycurrent
integraXradio
OBJECT-IDENTITY
1.3.6.1.4.1.7571.100.1.1.7.10.2
integraXradioA
OBJECT-IDENTITY
1.3.6.1.4.1.7571.100.1.1.7.10.2.1
integraXradioAtxPower
OBJECT-TYPE
Output power of radio transmitter
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.1Integer32read-onlycurrent
integraXradioAtxFrequency
OBJECT-TYPE
Frequency of radio transmitter
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.2Integer32read-onlycurrent
integraXradioArxLevel
OBJECT-TYPE
Level of the received signal
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.3Integer32read-onlycurrent
integraXradioArxLevelState
OBJECT-TYPE
Received signal level state
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.4INTEGER {ok(1), low(2), high(3), error(4)}read-onlycurrent
integraXradioAside
OBJECT-TYPE
Radio side: Low/High
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.5INTEGER {high(1), low(2), error(3)}read-onlycurrent
integraXradioAtxMute
OBJECT-TYPE
Status of 'Tx mute' 1 - Tx is muted, 2 - Tx is not muted. 3 - Status information unavailable
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.6INTEGER {on(1), off(2), error(3)}read-onlycurrent
integraXradioAtxMuteDuration
OBJECT-TYPE
Time remaning for Tx to be muted in seconds. To turn mute on send number of seconds between 10 and MAX. To turn mute off send 0. GET will retrieve remaining duration for mute or 0 if Tx mute is turned off.
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.7Integer32 (0..214748364)read-onlycurrent
integraXradioAduplexShift
OBJECT-TYPE
Utilized duplex shift in kHz
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.8Integer32read-onlycurrent
integraXradioArxFrequency
OBJECT-TYPE
Frequency of radio receiver
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.9Integer32read-onlycurrent
integraXradioAtemperature
OBJECT-TYPE
Radio module temperature
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.10FixedDiv10read-onlycurrent
integraXradioApll
OBJECT-TYPE
PLL state of local-oscillator generator
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.11INTEGER {error(1), ok(2)}read-onlycurrent
integraXradioArangesTable
OBJECT-TYPE
Network interface port status data.
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12not-accessiblecurrent
integraXradioArangeEntry
OBJECT-TYPE
An entry containing network physical port status info.
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1not-accessiblecurrent
integraXradioArangeEntryIndex
OBJECT-TYPE
A unique value, greater than zero, for each range entry. Starts with 1 and is equal to a number of all range parameters.
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1.1Integer32 (1..2)read-onlycurrent
integraXradioArangeDescr
OBJECT-TYPE
'Minimal' and 'maximal' labels
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1.2DisplayString (SIZE(0..255))read-onlycurrent
integraXradioArangeTxPower
OBJECT-TYPE
Output power ranges for radio transmitter
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1.3Integer32read-onlycurrent
integraXradioArangeTxFrequency
OBJECT-TYPE
Frequency ranges for radio transmitter
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1.4Integer32read-onlycurrent
integraXradioB
OBJECT-IDENTITY
1.3.6.1.4.1.7571.100.1.1.7.10.2.2
integraXradioBtxPower
OBJECT-TYPE
Output power of radio transmitter
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.1Integer32read-onlycurrent
integraXradioBtxFrequency
OBJECT-TYPE
Frequency of radio transmitter
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.2Integer32read-onlycurrent
integraXradioBrxLevel
OBJECT-TYPE
Level of the received signal
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.3Integer32read-onlycurrent
integraXradioBrxLevelState
OBJECT-TYPE
Received signal level state
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.4INTEGER {ok(1), low(2), high(3), error(4)}read-onlycurrent
integraXradioBside
OBJECT-TYPE
Radio side: Low/High
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.5INTEGER {high(1), low(2), error(3)}read-onlycurrent
integraXradioBtxMute
OBJECT-TYPE
Status of 'Tx mute' 1 - Tx is muted, 2 - Tx is not muted. 3 - Status information unavailable
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.6INTEGER {on(1), off(2), error(3)}read-onlycurrent
integraXradioBtxMuteDuration
OBJECT-TYPE
Time remaning for Tx to be muted in seconds. To turn mute on send number of seconds between 10 and MAX. To turn mute off send 0. GET will retrieve remaining duration for mute or 0 if Tx mute is turned off.
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.7Integer32 (0..214748364)read-onlycurrent
integraXradioBduplexShift
OBJECT-TYPE
Utilized duplex shift in kHz
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.8Integer32read-onlycurrent
integraXradioBrxFrequency
OBJECT-TYPE
Frequency of radio receiver
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.9Integer32read-onlycurrent
integraXradioBtemperature
OBJECT-TYPE
Radio module temperature
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.10FixedDiv10read-onlycurrent
integraXradioBpll
OBJECT-TYPE
PLL state of local-oscillator generator
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.11INTEGER {error(1), ok(2)}read-onlycurrent
integraXradioBrangesTable
OBJECT-TYPE
Network interface port status data.
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12not-accessiblecurrent
integraXradioBrangeEntry
OBJECT-TYPE
An entry containing network physical port status info.
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1not-accessiblecurrent
integraXradioBrangeEntryIndex
OBJECT-TYPE
A unique value, greater than zero, for each range entry. Starts with 1 and is equal to a number of all range parameters.
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1.1Integer32 (1..2)read-onlycurrent
integraXradioBrangeDescr
OBJECT-TYPE
'Minimal' and 'maximal' labels
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1.2DisplayString (SIZE(0..255))read-onlycurrent
integraXradioBrangeTxPower
OBJECT-TYPE
Output power ranges for radio transmitter
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1.3Integer32read-onlycurrent
integraXradioBrangeTxFrequency
OBJECT-TYPE
Frequency ranges for radio transmitter
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1.4Integer32read-onlycurrent
integraXmodem
OBJECT-IDENTITY
1.3.6.1.4.1.7571.100.1.1.7.10.3
integraXmodemA
OBJECT-IDENTITY
1.3.6.1.4.1.7571.100.1.1.7.10.3.1
integraXmodemAacquireStatus
OBJECT-TYPE
This is the current status of modem data acquire when queried modem status. For detailed info use modemAcquireLastStatusDetails.
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.1INTEGER {acquireInProgress(1), acquireLocked(2), acquireFailed(3)}read-onlycurrent
integraXmodemAnormalizedMse
OBJECT-TYPE
Current normalized MSE value (floating point value multiplied by 10)
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.2Integer32read-onlycurrent
integraXmodemAfecLoad
OBJECT-TYPE
Decoder stress or FEC load value (floating point in textual representation)
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.3DisplayStringread-onlycurrent
integraXmodemAxpdEst
OBJECT-TYPE
XPD Estimated value (floating point value multiplied by 10)
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.4Integer32read-onlycurrent
integraXmodemAacquireLastStatusDetails
OBJECT-TYPE
This is the last status of successfull or unsuccessful modem data acquire
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.5INTEGER {acquireLocked(1), acquireSweep(4), acquireMSEerror(5), acquireBITerror(6), acquireStopped(12), acquireSMerror(13)}read-onlycurrent
integraXmodemAtemperature
OBJECT-TYPE
Modem DSP temperature
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.6FixedDiv10read-onlycurrent
integraXmodemArxModulation
OBJECT-TYPE
Current (actual) Rx Modulation
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.7DisplayStringread-onlycurrent
integraXmodemAtxModulation
OBJECT-TYPE
Current (actual) Tx Modulation
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.8DisplayStringread-onlycurrent
integraXmodemArxCapacity
OBJECT-TYPE
Rx ethernet capacity in kilobits per second
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.9Integer32read-onlycurrent
integraXmodemAtxCapacity
OBJECT-TYPE
Tx ethernet capacity in kilobits per second
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.10Integer32read-onlycurrent
integraXmodemAacmEngine
OBJECT-TYPE
ACM engine status
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.11INTEGER {enabled(1), disabled(2), error(3)}read-onlycurrent
integraXmodemAcarrierOffset
OBJECT-TYPE
Modem carrier offset
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.12Integer32read-onlycurrent
integraXmodemAcountTime
OBJECT-TYPE
Modem performance count time
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.13Counter64read-onlycurrent
integraXmodemAerroredBlock
OBJECT-TYPE
Modem performance errored blocks
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.14Counter64read-onlycurrent
integraXmodemAerroredSecond
OBJECT-TYPE
Modem performance errored seconds
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.15Counter64read-onlycurrent
integraXmodemAseverelyErroredSecond
OBJECT-TYPE
Modem performance severely errored seconds
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.16Counter64read-onlycurrent
integraXmodemAbackgroundBlockError
OBJECT-TYPE
Modem performance background block errors
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.17Counter64read-onlycurrent
integraXmodemAtotalBlockNumber
OBJECT-TYPE
Modem performance total block number
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.18Counter64read-onlycurrent
integraXmodemAerroredSecondRatio
OBJECT-TYPE
Modem performance errored second ratio
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.19DisplayStringread-onlycurrent
integraXmodemAseverelyErroredSecondRatio
OBJECT-TYPE
Modem performance severely errored second ratio
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.20DisplayStringread-onlycurrent
integraXmodemAbackgroundBlockErrorRatio
OBJECT-TYPE
Modem performance background block error ratio
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.21DisplayStringread-onlycurrent
integraXmodemAuptime
OBJECT-TYPE
Modem performance : uptime
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.22Counter64read-onlycurrent
integraXmodemAunavailtime
OBJECT-TYPE
Modem performance : unavailtime
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.23Counter64read-onlycurrent
integraXmodemAfecLdpcBlockCounter
OBJECT-TYPE
Modem FEC load block counter
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.24Counter64read-onlycurrent
integraXmodemAfecLdpcUncorrectedBlockCounter
OBJECT-TYPE
Modem FEC load uncorrected block counter
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.25Counter64read-onlycurrent
integraXmodemAfecLdpcUncorrectedPercent
OBJECT-TYPE
Modem FEC load uncorrected percent
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.26Integer32read-onlycurrent
integraXmodemAfecRsBlockCounter
OBJECT-TYPE
Modem FEC load RS block counter
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.27Counter64read-onlycurrent
integraXmodemAfecRsUncorrectedBlockCounter
OBJECT-TYPE
Modem FEC load RS uncorrected block counter
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.28Counter64read-onlycurrent
integraXmodemAmodulationACMmin
OBJECT-TYPE
Minimal modulation for ACM enabled profile
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.29DisplayStringread-onlycurrent
integraXmodemAmodulationACMmax
OBJECT-TYPE
Maximal modulation for ACM enabled profile
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.30DisplayStringread-onlycurrent
integraXmodemB
OBJECT-IDENTITY
1.3.6.1.4.1.7571.100.1.1.7.10.3.2
integraXmodemBacquireStatus
OBJECT-TYPE
This is the current status of modem data acquire when queried modem status. For detailed info use modemAcquireLastStatusDetails.
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.1INTEGER {acquireInProgress(1), acquireLocked(2), acquireFailed(3)}read-onlycurrent
integraXmodemBnormalizedMse
OBJECT-TYPE
Current normalized MSE value (floating point value multiplied by 10)
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.2Integer32read-onlycurrent
integraXmodemBfecLoad
OBJECT-TYPE
Decoder stress or FEC load value (floating point in textual representation)
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.3DisplayStringread-onlycurrent
integraXmodemBxpdEst
OBJECT-TYPE
XPD Estimated value (floating point value multiplied by 10)
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.4Integer32read-onlycurrent
integraXmodemBacquireLastStatusDetails
OBJECT-TYPE
This is the last status of successfull or unsuccessful modem data acquire
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.5INTEGER {acquireLocked(1), acquireSweep(4), acquireMSEerror(5), acquireBITerror(6), acquireStopped(12), acquireSMerror(13)}read-onlycurrent
integraXmodemBtemperature
OBJECT-TYPE
Modem DSP temperature
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.6FixedDiv10read-onlycurrent
integraXmodemBrxModulation
OBJECT-TYPE
Current (actual) Rx Modulation
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.7DisplayStringread-onlycurrent
integraXmodemBtxModulation
OBJECT-TYPE
Current (actual) Tx Modulation
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.8DisplayStringread-onlycurrent
integraXmodemBrxCapacity
OBJECT-TYPE
Rx ethernet capacity in kilobits per second
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.9Integer32read-onlycurrent
integraXmodemBtxCapacity
OBJECT-TYPE
Tx ethernet capacity in kilobits per second
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.10Integer32read-onlycurrent
integraXmodemBacmEngine
OBJECT-TYPE
ACM engine status
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.11INTEGER {enabled(1), disabled(2), error(3)}read-onlycurrent
integraXmodemBcarrierOffset
OBJECT-TYPE
Modem carrier offset
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.12Integer32read-onlycurrent
integraXmodemBcountTime
OBJECT-TYPE
Modem performance count time
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.13Counter64read-onlycurrent
integraXmodemBerroredBlock
OBJECT-TYPE
Modem performance errored blocks
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.14Counter64read-onlycurrent
integraXmodemBerroredSecond
OBJECT-TYPE
Modem performance errored seconds
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.15Counter64read-onlycurrent
integraXmodemBseverelyErroredSecond
OBJECT-TYPE
Modem performance severely errored seconds
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.16Counter64read-onlycurrent
integraXmodemBbackgroundBlockError
OBJECT-TYPE
Modem performance background block errors
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.17Counter64read-onlycurrent
integraXmodemBtotalBlockNumber
OBJECT-TYPE
Modem performance total block number
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.18Counter64read-onlycurrent
integraXmodemBerroredSecondRatio
OBJECT-TYPE
Modem performance errored second ratio
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.19DisplayStringread-onlycurrent
integraXmodemBseverelyErroredSecondRatio
OBJECT-TYPE
Modem performance severely errored second ratio
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.20DisplayStringread-onlycurrent
integraXmodemBbackgroundBlockErrorRatio
OBJECT-TYPE
Modem performance background block error ratio
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.21DisplayStringread-onlycurrent
integraXmodemBuptime
OBJECT-TYPE
Modem performance : uptime
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.22Counter64read-onlycurrent
integraXmodemBunavailtime
OBJECT-TYPE
Modem performance : unavailtime
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.23Counter64read-onlycurrent
integraXmodemBfecLdpcBlockCounter
OBJECT-TYPE
Modem FEC load block counter
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.24Counter64read-onlycurrent
integraXmodemBfecLdpcUncorrectedBlockCounter
OBJECT-TYPE
Modem FEC load uncorrected block counter
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.25Counter64read-onlycurrent
integraXmodemBfecLdpcUncorrectedPercent
OBJECT-TYPE
Modem FEC load uncorrected percent
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.26Integer32read-onlycurrent
integraXmodemBfecRsBlockCounter
OBJECT-TYPE
Modem FEC load RS block counter
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.27Counter64read-onlycurrent
integraXmodemBfecRsUncorrectedBlockCounter
OBJECT-TYPE
Modem FEC load RS uncorrected block counter
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.28Counter64read-onlycurrent
integraXmodemBmodulationACMmin
OBJECT-TYPE
Minimal modulation for ACM enabled profile
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.29DisplayStringread-onlycurrent
integraXmodemBmodulationACMmax
OBJECT-TYPE
Maximal modulation for ACM enabled profile
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.30DisplayStringread-onlycurrent
integraXmodemBandwidth
OBJECT-TYPE
Signal bandwidth
1.3.6.1.4.1.7571.100.1.1.7.10.3.3Integer32read-onlycurrent
integraXmodemModulation
OBJECT-TYPE
Modulation (preferred)
1.3.6.1.4.1.7571.100.1.1.7.10.3.4DisplayStringread-onlycurrent
integraXsystem
OBJECT-IDENTITY
1.3.6.1.4.1.7571.100.1.1.7.10.4
integraXsysCPUtemperature
OBJECT-TYPE
System CPU temperature
1.3.6.1.4.1.7571.100.1.1.7.10.4.2FixedDiv10read-onlycurrent
integraXsysLicenseExpire
OBJECT-TYPE
License expires after number of seconds. In the case of -1, check licenseGenStatus status
1.3.6.1.4.1.7571.100.1.1.7.10.4.3Gauge32read-onlycurrent
integraXsysLicenseGenStatus
OBJECT-TYPE
License General status.
1.3.6.1.4.1.7571.100.1.1.7.10.4.4INTEGER {ok(1), expired(2), unknown(3), unlimitedTime(4)}read-onlycurrent
integraXsysPSUvoltage
OBJECT-TYPE
Power voltage in mV
1.3.6.1.4.1.7571.100.1.1.7.10.4.5Integer32read-onlycurrent
integraXsysPSUcurrent
OBJECT-TYPE
Power current in mA
1.3.6.1.4.1.7571.100.1.1.7.10.4.6Integer32read-onlycurrent
integraXsysPSUpower
OBJECT-TYPE
Power consumption in mW
1.3.6.1.4.1.7571.100.1.1.7.10.4.7Integer32read-onlycurrent
integraXsysBoardTemperature
OBJECT-TYPE
System temperature
1.3.6.1.4.1.7571.100.1.1.7.10.4.8FixedDiv10read-onlycurrent
integraXsysFreeMemory
OBJECT-TYPE
System free memory
1.3.6.1.4.1.7571.100.1.1.7.10.4.9FixedDiv10read-onlycurrent
integraXsysCPUidle
OBJECT-TYPE
System CPU idle
1.3.6.1.4.1.7571.100.1.1.7.10.4.10FixedDiv10read-onlycurrent
integraXsysDeviceType
OBJECT-TYPE
Device type name
1.3.6.1.4.1.7571.100.1.1.7.10.4.11DisplayStringread-onlycurrent
integraXsysDeviceSerial
OBJECT-TYPE
Device serial number
1.3.6.1.4.1.7571.100.1.1.7.10.4.12DisplayStringread-onlycurrent
integraXsysDeviceProductModel
OBJECT-TYPE
Device product model code
1.3.6.1.4.1.7571.100.1.1.7.10.4.13DisplayStringread-onlycurrent
integraXsysFanError
OBJECT-TYPE
Device fan 1 and fan 2 error status
1.3.6.1.4.1.7571.100.1.1.7.10.4.14Bits {no(0), fan1(1), fan2(2), unknown(3)}read-onlycurrent
integraXsysSw1v0core
OBJECT-TYPE
SW_1V0_CORE
1.3.6.1.4.1.7571.100.1.1.7.10.4.15FixedDiv20read-onlycurrent
integraXsysSw1v0avdd
OBJECT-TYPE
SW_1V0_AVDD
1.3.6.1.4.1.7571.100.1.1.7.10.4.16FixedDiv20read-onlycurrent
integraXsysSw1v2a
OBJECT-TYPE
SW_1V2A
1.3.6.1.4.1.7571.100.1.1.7.10.4.17FixedDiv20read-onlycurrent
integraXsysSw1v5ddr
OBJECT-TYPE
SW_1V5_DDR
1.3.6.1.4.1.7571.100.1.1.7.10.4.18FixedDiv20read-onlycurrent
integraXsysSw1v8
OBJECT-TYPE
SW_1V8
1.3.6.1.4.1.7571.100.1.1.7.10.4.19FixedDiv20read-onlycurrent
integraXsysSw2v5
OBJECT-TYPE
SW_2V5
1.3.6.1.4.1.7571.100.1.1.7.10.4.20FixedDiv20read-onlycurrent
integraXsysSw3v3
OBJECT-TYPE
SW_3V3
1.3.6.1.4.1.7571.100.1.1.7.10.4.21FixedDiv20read-onlycurrent
integraXsysVttrefPs
OBJECT-TYPE
VTTVREF_PS
1.3.6.1.4.1.7571.100.1.1.7.10.4.22FixedDiv20read-onlycurrent
integraXsysVttddrPs
OBJECT-TYPE
VTTDDR_PS
1.3.6.1.4.1.7571.100.1.1.7.10.4.23FixedDiv20read-onlycurrent
integraXsysZq1v0
OBJECT-TYPE
ZQ_1V0
1.3.6.1.4.1.7571.100.1.1.7.10.4.24FixedDiv20read-onlycurrent
integraXsysZq1v5
OBJECT-TYPE
ZQ_1V5
1.3.6.1.4.1.7571.100.1.1.7.10.4.25FixedDiv20read-onlycurrent
integraXsysZq1v8
OBJECT-TYPE
ZQ_1V8
1.3.6.1.4.1.7571.100.1.1.7.10.4.26FixedDiv20read-onlycurrent
integraXsysZq2v5
OBJECT-TYPE
ZQ_2V5
1.3.6.1.4.1.7571.100.1.1.7.10.4.27FixedDiv20read-onlycurrent
integraXsysZq3v3
OBJECT-TYPE
ZQ_3V3
1.3.6.1.4.1.7571.100.1.1.7.10.4.28FixedDiv20read-onlycurrent
integraXsys5v0d
OBJECT-TYPE
5V0D
1.3.6.1.4.1.7571.100.1.1.7.10.4.29FixedDiv20read-onlycurrent
integraXsysSw1v2
OBJECT-TYPE
SW_1V2
1.3.6.1.4.1.7571.100.1.1.7.10.4.30FixedDiv20read-onlycurrent
integraXsysMdmVddcAvs
OBJECT-TYPE
MDM_VDDC_AVS
1.3.6.1.4.1.7571.100.1.1.7.10.4.31FixedDiv20read-onlycurrent
integraXsysMdm3v3
OBJECT-TYPE
MDM_3V3
1.3.6.1.4.1.7571.100.1.1.7.10.4.32FixedDiv20read-onlycurrent
integraXsysMdm1v0aPm
OBJECT-TYPE
MDM_1V0A_PM
1.3.6.1.4.1.7571.100.1.1.7.10.4.33FixedDiv20read-onlycurrent
integraXsysMdm1v0a
OBJECT-TYPE
MDM_1V0A
1.3.6.1.4.1.7571.100.1.1.7.10.4.34FixedDiv20read-onlycurrent
integraXsysMdm1v8a
OBJECT-TYPE
MDM_1V8A
1.3.6.1.4.1.7571.100.1.1.7.10.4.35FixedDiv20read-onlycurrent
integraXsysMdmDAC02v5a
OBJECT-TYPE
MDM_DAC0_2V5A
1.3.6.1.4.1.7571.100.1.1.7.10.4.36FixedDiv20read-onlycurrent
integraXsysMdmDAC12v5
OBJECT-TYPE
MDM_DAC1_2V5A
1.3.6.1.4.1.7571.100.1.1.7.10.4.37FixedDiv20read-onlycurrent
integraXsysMdmDAC22v5
OBJECT-TYPE
MDM_DAC2_2V5A
1.3.6.1.4.1.7571.100.1.1.7.10.4.38FixedDiv20read-onlycurrent
integraXsysMdm1v8io
OBJECT-TYPE
MDM_1V8_IO
1.3.6.1.4.1.7571.100.1.1.7.10.4.39FixedDiv20read-onlycurrent
integraXsysMdm3v3io
OBJECT-TYPE
MDM_3V3_IO
1.3.6.1.4.1.7571.100.1.1.7.10.4.40FixedDiv20read-onlycurrent
integraXsys3v3Radio
OBJECT-TYPE
3V3_RADIO
1.3.6.1.4.1.7571.100.1.1.7.10.4.41FixedDiv20read-onlycurrent
integraXsysMdm4v0
OBJECT-TYPE
MDM_4V0
1.3.6.1.4.1.7571.100.1.1.7.10.4.42FixedDiv20read-onlycurrent
integraXsys5v0nRadio
OBJECT-TYPE
5V0N_RADIO
1.3.6.1.4.1.7571.100.1.1.7.10.4.43FixedDiv20read-onlycurrent
integraXsysCoreVddSns
OBJECT-TYPE
CORE_VDD_SNS
1.3.6.1.4.1.7571.100.1.1.7.10.4.44FixedDiv20read-onlycurrent
integraXsys40v0RadioSns
OBJECT-TYPE
40V0_RADIO_SNS
1.3.6.1.4.1.7571.100.1.1.7.10.4.45FixedDiv20read-onlycurrent
integraXsysServices
OBJECT-IDENTITY
1.3.6.1.4.1.7571.100.1.1.7.10.4.46
integraXsysServicesReboot
OBJECT-TYPE
This object can only be set to 1. It initiates system reboot immediately.
1.3.6.1.4.1.7571.100.1.1.7.10.4.46.1INTEGER {reboot(1)}read-writecurrent
integraXsysServicesFtpSwitch
OBJECT-TYPE
Status and on/off switch for the FTP server
1.3.6.1.4.1.7571.100.1.1.7.10.4.46.2INTEGER {disabled(1), enabled(2), unknown(3)}read-writecurrent
integraXsysServicesFwCurrInfo
OBJECT-TYPE
Currently running FW info. Same output as in RFC1213-MIB::sysDescr.
1.3.6.1.4.1.7571.100.1.1.7.10.4.46.3DisplayString (SIZE(0..255))read-onlycurrent
integraXsysServicesFwAvailView
OBJECT-TYPE
List FW available for installation (uploaded).
1.3.6.1.4.1.7571.100.1.1.7.10.4.46.4DisplayStringread-onlycurrent
integraXsysServicesFwRemove
OBJECT-TYPE
Remove available (uploaded) FW version. View FW versions in integraXsysServicesFwAvailView. Send number corresponding to info in integraXsysServicesFwAvailView.
1.3.6.1.4.1.7571.100.1.1.7.10.4.46.5INTEGER {candfw1(1), candfw2(2), candfw3(3), candfw4(4), candfw5(5)}read-writecurrent
integraXsysServicesFwRemoveAll
OBJECT-TYPE
Remove all available (uploaded) FW versions.
1.3.6.1.4.1.7571.100.1.1.7.10.4.46.6INTEGER {removeAllCandfw(1)}read-writecurrent
integraXsysServicesFwUpload
OBJECT-TYPE
Upload FW (make available for installation). You need to upload a firmware to FTP ftp://anonymous@DEVICE_IP:/firmware/ first! You must have only 1 firmware in firmware folder for this option to work! This option only starts upload on the device and doesn't return success status for it. Usually you should wait some time while the device completes upload. SNMP won't response to quieries while upload is in progress. You may check integraXsysServicesFwAvailView to see if your FW is ready for install.
1.3.6.1.4.1.7571.100.1.1.7.10.4.46.7INTEGER {upload(1)}read-writecurrent
integraXsysServicesFwInst
OBJECT-TYPE
Install FW version. You need check integraXsysServicesFwAvailView to see FW versions ready for install. This option only starts installation on the device and doesn't return success status for it. Usually you should wait some time while the device completes installation. SNMP won't response to quieries while upload is in progress. If FW installation was successful, integraXsysServicesFwSwitchNext will show different FW bank value for the next boot.
1.3.6.1.4.1.7571.100.1.1.7.10.4.46.8INTEGER {candfw1(1), candfw2(2), candfw3(3), candfw4(4), candfw5(5)}read-writecurrent
integraXsysServicesFwSwitchRunning
OBJECT-TYPE
FW running bank info. Use integraXsysServicesFwSwitchNext to view and switch FW bank for the next boot.
1.3.6.1.4.1.7571.100.1.1.7.10.4.46.9INTEGER {fw1(1), fw2(2)}read-onlycurrent
integraXsysServicesFwSwitchNext
OBJECT-TYPE
FW next boot bank info. Set request can change FW bank for the next boot. View running FW bank number in integraXsysServicesFwSwitchRunning.
1.3.6.1.4.1.7571.100.1.1.7.10.4.46.10INTEGER {fw1(1), fw2(2)}read-writecurrent
integraXethernet
OBJECT-IDENTITY
1.3.6.1.4.1.7571.100.1.1.7.10.5
integraXifStatusTable
OBJECT-TYPE
Network interface port status data.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1not-accessiblecurrent
integraXifPortEntry
OBJECT-TYPE
An entry containing network physical port status info.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1not-accessiblecurrent
integraXifPortStatIndex
OBJECT-TYPE
A unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.1Integer32 (1..4)read-onlycurrent
integraXifPortStatDescr
OBJECT-TYPE
Physical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP and WAN is radio port.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.2DisplayString (SIZE(0..255))read-onlycurrent
integraXifPortType
OBJECT-TYPE
The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.3IANAifTyperead-onlycurrent
integraXifPortMtu
OBJECT-TYPE
Maximum transmission unit value in bytes.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.4Integer32read-onlycurrent
integraXifPortHighSpeed
OBJECT-TYPE
Link speed in 1 000 000 * bits per second.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.5Gauge32read-onlycurrent
integraXifPortPhysAddress
OBJECT-TYPE
The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.6PhysAddressread-onlycurrent
integraXifPortAdminStatus
OBJECT-TYPE
Desired state of network interfaces. Interfaces can be enabled(1), disabled(2), unknown(3) (no info received).
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.7INTEGER {enabled(1), disabled(2), unknown(3)}read-onlycurrent
integraXifPortOperStatus
OBJECT-TYPE
Actual state of interfaces. Link can be up(1), down(2) or in unknown(3) state.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.8INTEGER {up(1), down(2), unknown(3)}read-onlycurrent
integraXifPortLastChange
OBJECT-TYPE
This parameter value is always 0 at the moment.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.9TimeTicksread-onlycurrent
integraXifPortAutoneg
OBJECT-TYPE
Auto-negotiation status. Unknown means no info was received.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.10INTEGER {enabled(1), disabled(2), unknown(3)}read-onlycurrent
integraXifPortDuplex
OBJECT-TYPE
Duplex status for the interface.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.11INTEGER {full(1), half(2), unknown(3)}read-onlycurrent
integraXifPortSyncEthActive
OBJECT-TYPE
Synchronous Ethernet status. Can be active(1) or inactive(0).
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.12INTEGER {off(0), on(1)}read-onlycurrent
integraXifPortSyncEthPrio
OBJECT-TYPE
Synchronous Ethernet priority.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.13Integer32read-onlycurrent
integraXifPortFlowControl
OBJECT-TYPE
Flow control status.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.14INTEGER {enabled(1), disabled(2), unknown(3)}read-onlycurrent
integraXifStatisticsTable
OBJECT-TYPE
Network interface port statistics data.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2not-accessiblecurrent
integraXifPortStcEntry
OBJECT-TYPE
An entry containing network physical port statistics counter data.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1not-accessiblecurrent
integraXifPortStcIndex
OBJECT-TYPE
A unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.1Integer32 (1..5)read-onlycurrent
integraXifPortStcDescr
OBJECT-TYPE
Physical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP, WAN is radio port and MNG is internal management interface.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.2DisplayString (SIZE(0..255))read-onlycurrent
integraXifTimePassed
OBJECT-TYPE
Statistics collection time.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.3TimeTicksread-onlycurrent
integraXifIngressPackets
OBJECT-TYPE
Packets that ingress on the port.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.4Counter64read-onlycurrent
integraXifIngressBytes
OBJECT-TYPE
Bytes that ingress on the port.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.5Counter64read-onlycurrent
integraXifEgressPackets
OBJECT-TYPE
Packets that egress on the port.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.6Counter64read-onlycurrent
integraXifEgressBytes
OBJECT-TYPE
Bytes that egress on the port.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.7Counter64read-onlycurrent
integraXifEtherStatsMulticastPkts
OBJECT-TYPE
The total number of good packets (both received and transmitted) that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.8Counter64read-onlycurrent
integraXifEtherStatsBroadcastPkts
OBJECT-TYPE
The total number of good packets (both received and transmitted) that were directed to the broadcast address. Note that this does not include multicast packets.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.9Counter64read-onlycurrent
integraXifEtherStatsPkts64Octets
OBJECT-TYPE
The total number of packets (including bad packets) (both received and transmitted) that were 64 octets in length (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.10Counter64read-onlycurrent
integraXifEtherStatsPkts65to127Octets
OBJECT-TYPE
The total number of packets (including bad packets) (both received and transmitted) that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.11Counter64read-onlycurrent
integraXifEtherStatsPkts128to255Octets
OBJECT-TYPE
The total number of packets (including bad packets) (both received and transmitted) that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.12Counter64read-onlycurrent
integraXifEtherStatsPkts256to511Octets
OBJECT-TYPE
The total number of packets (including bad packets) (both received and transmitted) that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.13Counter64read-onlycurrent
integraXifEtherStatsPkts512to1023Octets
OBJECT-TYPE
The total number of packets (including bad packets) (both received and transmitted) that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.14Counter64read-onlycurrent
integraXifEtherStatsPkts1024to1518Octets
OBJECT-TYPE
The total number of packets (including bad packets) (both received and transmitted) that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.15Counter64read-onlycurrent
integraXifEtherStatsOversizePkts
OBJECT-TYPE
The number of packets (both received and transmitted) that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.16Counter64read-onlycurrent
integraXifEtherRxOversizePkts
OBJECT-TYPE
The number of packets received that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.17Counter64read-onlycurrent
integraXifEtherTxOversizePkts
OBJECT-TYPE
The number of packets transmitted that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.18Counter64read-onlycurrent
integraXifEtherStatsOctets
OBJECT-TYPE
Total number of octets of data (including those in bad packets) both received and transmitted.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.19Counter64read-onlycurrent
integraXifEtherStatsPkts
OBJECT-TYPE
Total number of packets (including bad packets) both received and transmitted.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.20Counter64read-onlycurrent
integraXifEtherStatsTXNoErrors
OBJECT-TYPE
Number of packets that were transmitted without errors.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.21Counter64read-onlycurrent
integraXifEtherStatsRXNoErrors
OBJECT-TYPE
Number of packets that were received without errors.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.22Counter64read-onlycurrent
integraXifEtherStatsPkts1519to1522Octets
OBJECT-TYPE
The total number of packets (including bad packets) (both received and transmitted) that were between 1519 and 1522 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.23Counter64read-onlycurrent
integraXifIfInOctets
OBJECT-TYPE
Total number of octets of data (including those in bad packets) that were received.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.24Counter64read-onlycurrent
integraXifIfOutOctets
OBJECT-TYPE
Total number of octets of data (including those in bad packets) that were transmitted.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.25Counter64read-onlycurrent
integraXifDot1dTpPortInFrames
OBJECT-TYPE
The number of frames that have been received by this port from its segment.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.26Counter64read-onlycurrent
integraXifDot1dTpPortOutFrames
OBJECT-TYPE
The number of frames that have been transmitted by this port to its segment.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.27Counter64read-onlycurrent
integraXifReceivedPkts64Octets
OBJECT-TYPE
Total number of received packets that were 64 octets in length (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.28Counter64read-onlycurrent
integraXifTransmittedPkts64Octets
OBJECT-TYPE
Total number of transmitted packets that were 64 octets in length (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.29Counter64read-onlycurrent
integraXifReceivedPkts65to127Octets
OBJECT-TYPE
Total number of received packets that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.30Counter64read-onlycurrent
integraXifTransmittedPkts65to127Octets
OBJECT-TYPE
Total number of transmitted packets that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.31Counter64read-onlycurrent
integraXifReceivedPkts128to255Octets
OBJECT-TYPE
Total number of received packets that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.32Counter64read-onlycurrent
integraXifTransmittedPkts128to255Octets
OBJECT-TYPE
Total number of transmitted packets that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.33Counter64read-onlycurrent
integraXifReceivedPkts256to511Octets
OBJECT-TYPE
Total number of received packets that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.34Counter64read-onlycurrent
integraXifTransmittedPkts256to511Octets
OBJECT-TYPE
Total number of transmitted packets that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.35Counter64read-onlycurrent
integraXifReceivedPkts512to1023Octets
OBJECT-TYPE
Total number of received packets that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.36Counter64read-onlycurrent
integraXifTransmittedPkts512to1023Octets
OBJECT-TYPE
Total number of transmitted packets that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.37Counter64read-onlycurrent
integraXifReceivedPkts1024to1518Octets
OBJECT-TYPE
Total number of received packets that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.38Counter64read-onlycurrent
integraXifTransmittedPkts1024to1518Octets
OBJECT-TYPE
Total number of transmitted packets that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.39Counter64read-onlycurrent
integraXifIfInBroadcastPkts
OBJECT-TYPE
The total number of received good packets that were directed to the broadcast address. Note that this does not include multicast packets.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.40Counter64read-onlycurrent
integraXifIfOutBroadcastPkts
OBJECT-TYPE
The total number of transmitted good packets that were directed to the broadcast address. Note that this does not include multicast packets.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.41Counter64read-onlycurrent
integraXifIfInMulticastPkts
OBJECT-TYPE
The total number of received good packets that were directed to a multicast address. Note that this number does not include broadcast packets.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.42Counter64read-onlycurrent
integraXifIfOutMulticastPkts
OBJECT-TYPE
The total number of transmitted good packets that were directed to a multicast address. Note that this number does not include broadcast packets.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.43Counter64read-onlycurrent
integraXifDot3InPauseFrames
OBJECT-TYPE
A count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.44Counter64read-onlycurrent
integraXifDot3OutPauseFrames
OBJECT-TYPE
A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.45Counter64read-onlycurrent
integraXifEtherStatsUndersizePkts
OBJECT-TYPE
The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.46Counter64read-onlycurrent
integraXifEtherStatsFragments
OBJECT-TYPE
The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherStatsFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.47Counter64read-onlycurrent
integraXifEtherStatsCRCAlignErrors
OBJECT-TYPE
The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.48Counter64read-onlycurrent
integraXifEtherStatsJabbers
OBJECT-TYPE
The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.49Counter64read-onlycurrent
integraXifIngressBPS
OBJECT-TYPE
Ingoing data transfer rate in bytes per second.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.50Integer32read-onlycurrent
integraXifIngressPPS
OBJECT-TYPE
Ingoing data transfer rate in packets per second.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.51Integer32read-onlycurrent
integraXifEgressBPS
OBJECT-TYPE
Outgoing data transfer rate in bytes per second.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.52Integer32read-onlycurrent
integraXifEgressPPS
OBJECT-TYPE
Outgoing data transfer rate in packets per second.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.53Integer32read-onlycurrent
integraXifAllCoSQoutPackets
OBJECT-TYPE
All CoSQ outgoing packets.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.54Counter64read-onlycurrent
integraXifAllCoSQoutBytes
OBJECT-TYPE
All CoSQ outgoing bytes.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.55Counter64read-onlycurrent
integraXifAllCoSQdroppedPackets
OBJECT-TYPE
All CoSQ dropped packets.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.56Counter64read-onlycurrent
integraXifAllCoSQdroppedBytes
OBJECT-TYPE
All CoSQ dropped bytes.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.57Counter64read-onlycurrent
integraXifProcessedRxPackets
OBJECT-TYPE
Processed received packets.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.58Counter64read-onlycurrent
integraXifProcessedRxBytes
OBJECT-TYPE
Processed received bytes.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.59Counter64read-onlycurrent
integraXifLspPortAdminState
OBJECT-TYPE
LSP port status.
1.3.6.1.4.1.7571.100.1.1.7.10.5.3INTEGER {disabled(1), lsp(2), backup(3), unknown(4)}read-onlycurrent
integraXifLspPortList
OBJECT-TYPE
LSP port status.
1.3.6.1.4.1.7571.100.1.1.7.10.5.4Bits {none(0), lan1(1), lan2(2), lan3(3)}read-onlycurrent
integraXifLspPortStatus
OBJECT-TYPE
LSP port status.
1.3.6.1.4.1.7571.100.1.1.7.10.5.5INTEGER {lspPortOK(1), lspPortDownBlockedByLSP(2), backupNoLink(3), backupLinkActive(4), backupLinkReady(5), unknown(6)}read-onlycurrent
integraXexecuteConfig
OBJECT-TYPE
This object can only be set to 1. It initiates new running configuration applying using values, that have been set before. Setting it when no new changes are available will do nothing and return an error. GET will return 0 if there were no errors, while executing configuration or will return a bitmask, that shows which SET requests have failed. Those failed requests will be shown bit wise from LSB as follows: BIT0 radioTxMuteDuration BIT1 radioTxFrequency BIT2 radioTxPower
1.3.6.1.4.1.7571.100.1.1.7.10.6INTEGER {execute(1)}read-writecurrent
integraXneedStore
OBJECT-TYPE
This object shows if there is unsaved, but executed (running) configuration. Unsaved changes will be lost after device reboot. Unsaved entities are shown bit wise, starting from LSB as follows: BIT0 Aggregation BIT1 Event log BIT2 Modem BIT3 Network BIT4 Performance BIT5 Radio BIT6 SNMP BIT7 Synchronous Ethernet BIT8 System
1.3.6.1.4.1.7571.100.1.1.7.10.7INTEGER {no(0)}read-onlycurrent
integraXstoreConfig
OBJECT-TYPE
This object can only be set to 1. It initiates saving of running configuration. It will only work if there are unsaved, but executed (running) changes (configuration). Setting it when no new running configuration is available will do nothing and return an error.
1.3.6.1.4.1.7571.100.1.1.7.10.8INTEGER {store(1)}read-writecurrent
integraXnetCfg
OBJECT-IDENTITY
1.3.6.1.4.1.7571.100.1.1.7.10.9
integraXnetCfgIPaddress
OBJECT-TYPE
Local IP address
1.3.6.1.4.1.7571.100.1.1.7.10.9.1DisplayStringread-writecurrent
integraXnetCfgIPmask
OBJECT-TYPE
Local IP mask
1.3.6.1.4.1.7571.100.1.1.7.10.9.2DisplayStringread-writecurrent
integraXnetCfgIPgateway
OBJECT-TYPE
IP gateway Send '0' or '255.255.255.255' to clear.
1.3.6.1.4.1.7571.100.1.1.7.10.9.3DisplayStringread-writecurrent
integraXnetCfgRemoteIPaddress
OBJECT-TYPE
Remote IP address
1.3.6.1.4.1.7571.100.1.1.7.10.9.4DisplayStringread-onlycurrent
integraXConformance
OBJECT-IDENTITY
1.3.6.1.4.1.7571.100.1.1.7.10.10
integraXCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.7571.100.1.1.7.10.10.1
integraXGroups
OBJECT-IDENTITY
1.3.6.1.4.1.7571.100.1.1.7.10.10.2

Conformance

NameOIDStatus
integraXCompliance
MODULE-COMPLIANCE
The compliance statement for SNMP engine which implements the SAF Tehnika Integra-X device.
1.3.6.1.4.1.7571.100.1.1.7.10.10.1.1current
integraXMiscGroup
OBJECT-GROUP
misc data
1.3.6.1.4.1.7571.100.1.1.7.10.10.2.1current
integraXRadioGroup
OBJECT-GROUP
Radio group.
1.3.6.1.4.1.7571.100.1.1.7.10.10.2.2current
integraXModemGroup
OBJECT-GROUP
Modem group.
1.3.6.1.4.1.7571.100.1.1.7.10.10.2.3current
integraXSystemGroup
OBJECT-GROUP
System group.
1.3.6.1.4.1.7571.100.1.1.7.10.10.2.4current
integraXEthernetGeneralGroup
OBJECT-GROUP
A collection to objects, providing info applicable to all network interfaces.
1.3.6.1.4.1.7571.100.1.1.7.10.10.2.5current
integraXEthernetMiiPortGroup
OBJECT-GROUP
A collection of objects, providing info applicable only to MII group interfaces.
1.3.6.1.4.1.7571.100.1.1.7.10.10.2.6current