SAF-INTEGRAE-MIB
- Registered at
- 1.3.6.1.4.1.7571.100.1.1.7.9
- Last updated
- 2020-04-25 00:00
- Organization
- SAF Tehnika
- Revisions
- 2020-04-25 00:00, 2020-04-22 00:00, 2020-01-14 00:00, 2019-11-21 00:00, 2019-06-11 00:00, 2019-04-23 00:00, 2019-03-12 00:00, 2019-02-04 00:00, 2018-11-15 00:00, 2018-11-14 00:00
- Namespace
- saf
- Source file
SAF-INTEGRAE-MIB- Digest
sha256:2f1c4b9d24c7b955716663e297cc7d5f6aee78a749fe5403cd131bacc2160213
Description
SAF Integra-E device management base
Contact
SAF Tehnika technical support <techsupport@saftehnika.com>
Imports
| From | Symbols |
|---|---|
| IANAifType-MIB | IANAifType |
| SAF-ENTERPRISE | pointToPoint |
| SAF-INTEGRA-MIB | safIntegra |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB SAF-ENTERPRISE SAF-INTEGRA-MIB SAF-INTEGRAE-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| FixedDiv10 TEXTUAL-CONVENTION Fixed point, two decimals | current | |||
| FixedDiv20 TEXTUAL-CONVENTION Fixed point, two decimals | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| integraEtimestamp OBJECT-TYPE Last data update time | 1.3.6.1.4.1.7571.100.1.1.7.9.1 | DateAndTime | read-only | current |
| integraEradio OBJECT-IDENTITY | 1.3.6.1.4.1.7571.100.1.1.7.9.2 | |||
| integraEradioTxPower OBJECT-TYPE Output power of radio transmitter | 1.3.6.1.4.1.7571.100.1.1.7.9.2.1 | Integer32 | read-write | current |
| integraEradioTxFrequency OBJECT-TYPE Frequency of radio transmitter | 1.3.6.1.4.1.7571.100.1.1.7.9.2.2 | Integer32 | read-write | current |
| integraEradioRxLevel OBJECT-TYPE Level of the received signal | 1.3.6.1.4.1.7571.100.1.1.7.9.2.3 | Integer32 | read-only | current |
| integraEradioSide OBJECT-TYPE Radio side: Low/High | 1.3.6.1.4.1.7571.100.1.1.7.9.2.4 | INTEGER {high(1), low(2), error(3)} | read-only | current |
| integraEradioTxMute OBJECT-TYPE Status of 'Tx mute' 1 - Tx is muted, 2 - Tx is not muted. 3 - Status information unavailable | 1.3.6.1.4.1.7571.100.1.1.7.9.2.5 | INTEGER {on(1), off(2), error(3)} | read-only | current |
| integraEradioDuplexShift OBJECT-TYPE Utilized duplex shift in kHz | 1.3.6.1.4.1.7571.100.1.1.7.9.2.6 | Integer32 | read-only | current |
| integraEradioRxFrequency OBJECT-TYPE Frequency of radio receiver | 1.3.6.1.4.1.7571.100.1.1.7.9.2.7 | Integer32 | read-only | current |
| integraEradioTemperature OBJECT-TYPE Radio module temperature | 1.3.6.1.4.1.7571.100.1.1.7.9.2.8 | FixedDiv10 | read-only | current |
| integraEradioTxMuteDuration OBJECT-TYPE Time remaning for Tx to be muted in seconds. To turn mute on send number of seconds between 10 and MAX. To turn mute off send 0. GET will retrieve remaining duration for mute or 0 if Tx mute is turned off. | 1.3.6.1.4.1.7571.100.1.1.7.9.2.9 | Integer32 (0..214748364) | read-write | current |
| integraEradioRangesTable OBJECT-TYPE Network interface port status data. | 1.3.6.1.4.1.7571.100.1.1.7.9.2.10 | not-accessible | current | |
| integraEradioRangeEntry OBJECT-TYPE An entry containing network physical port status info. | 1.3.6.1.4.1.7571.100.1.1.7.9.2.10.1 | not-accessible | current | |
| integraEradioRangeEntryIndex OBJECT-TYPE A unique value, greater than zero, for each range entry. Starts with 1 and is equal to a number of all range parameters. | 1.3.6.1.4.1.7571.100.1.1.7.9.2.10.1.1 | Integer32 (1..2) | read-only | current |
| integraEradioRangeDescr OBJECT-TYPE 'Minimal' and 'maximal' labels | 1.3.6.1.4.1.7571.100.1.1.7.9.2.10.1.2 | DisplayString (SIZE(0..255)) | read-only | current |
| integraEradioRangeTxPower OBJECT-TYPE Output power ranges for radio transmitter | 1.3.6.1.4.1.7571.100.1.1.7.9.2.10.1.3 | Integer32 | read-only | current |
| integraEradioRangeTxFrequency OBJECT-TYPE Frequency ranges for radio transmitter | 1.3.6.1.4.1.7571.100.1.1.7.9.2.10.1.4 | Integer32 | read-only | current |
| integraEradioPLL OBJECT-TYPE PLL state of local-oscillator generator | 1.3.6.1.4.1.7571.100.1.1.7.9.2.11 | INTEGER {error(1), ok(2)} | read-only | current |
| integraEradioRxLevelState OBJECT-TYPE Received signal level state | 1.3.6.1.4.1.7571.100.1.1.7.9.2.12 | INTEGER {ok(1), low(2), high(3), error(4)} | read-only | current |
| integraEradioAtpcState OBJECT-TYPE ATPC state | 1.3.6.1.4.1.7571.100.1.1.7.9.2.13 | INTEGER {off(1), on(2), unknown(3)} | read-only | current |
| integraEradioAtpcUpdatePeriod OBJECT-TYPE ATPC update period | 1.3.6.1.4.1.7571.100.1.1.7.9.2.14 | Integer32 (0..214748364) | read-only | current |
| integraEradioAtpcRxLevelMin OBJECT-TYPE ATPC Minimal level of the received signal | 1.3.6.1.4.1.7571.100.1.1.7.9.2.15 | Integer32 | read-only | current |
| integraEradioAtpcRxLevelMax OBJECT-TYPE ATPC Maximal level of the received signal | 1.3.6.1.4.1.7571.100.1.1.7.9.2.16 | Integer32 | read-only | current |
| integraEmodem OBJECT-IDENTITY | 1.3.6.1.4.1.7571.100.1.1.7.9.3 | |||
| integraEmodemAcquireStatus OBJECT-TYPE This is the current status of modem data acquire when queried modem status. For detailed info use modemAcquireLastStatusDetails. | 1.3.6.1.4.1.7571.100.1.1.7.9.3.1 | INTEGER {acquireInProgress(1), acquireLocked(2), acquireFailed(3)} | read-only | current |
| integraEmodemNormalizedMse OBJECT-TYPE Current normalized MSE value | 1.3.6.1.4.1.7571.100.1.1.7.9.3.2 | FixedDiv10 | read-only | current |
| integraEmodemFECload OBJECT-TYPE Decoder stress or FEC load value | 1.3.6.1.4.1.7571.100.1.1.7.9.3.3 | FixedDiv10 | read-only | current |
| integraEmodemFEClocked OBJECT-TYPE FEC locked status | 1.3.6.1.4.1.7571.100.1.1.7.9.3.4 | INTEGER {no(1), yes(2), unknown(3)} | read-only | current |
| integraEmodemAcquireLastStatusDetails OBJECT-TYPE This is the last status of successfull or unsuccessful modem data acquire | 1.3.6.1.4.1.7571.100.1.1.7.9.3.5 | INTEGER {acquireLocked(1), acquireSweep(4), acquireMSEerror(5), acquireBITerror(6), acquireStopped(12), acquireSMerror(13)} | read-only | current |
| integraEmodemTemperature OBJECT-TYPE Modem DSP temperature | 1.3.6.1.4.1.7571.100.1.1.7.9.3.6 | FixedDiv10 | read-only | current |
| integraEmodemBandwidth OBJECT-TYPE Signal bandwidth | 1.3.6.1.4.1.7571.100.1.1.7.9.3.7 | Integer32 | read-only | current |
| integraEmodemModulation OBJECT-TYPE Modulation (preferred) | 1.3.6.1.4.1.7571.100.1.1.7.9.3.8 | DisplayString | read-only | current |
| integraEmodemRxModulation OBJECT-TYPE Current (actual) Rx Modulation | 1.3.6.1.4.1.7571.100.1.1.7.9.3.9 | DisplayString | read-only | current |
| integraEmodemTxModulation OBJECT-TYPE Current (actual) Tx Modulation | 1.3.6.1.4.1.7571.100.1.1.7.9.3.10 | DisplayString | read-only | current |
| integraEmodemRxCapacity OBJECT-TYPE Rx ethernet capacity in kilobits per second | 1.3.6.1.4.1.7571.100.1.1.7.9.3.11 | Integer32 | read-only | current |
| integraEmodemTxCapacity OBJECT-TYPE Tx ethernet capacity in kilobits per second | 1.3.6.1.4.1.7571.100.1.1.7.9.3.12 | Integer32 | read-only | current |
| integraEmodemACMBengine OBJECT-TYPE ACMB engine status | 1.3.6.1.4.1.7571.100.1.1.7.9.3.13 | INTEGER {enabled(1), disabled(2), error(3)} | read-only | current |
| integraEmodemCarrierOffset OBJECT-TYPE Modem carrier offset | 1.3.6.1.4.1.7571.100.1.1.7.9.3.14 | Integer32 | read-only | current |
| integraEmodemCountTime OBJECT-TYPE Modem performance count time | 1.3.6.1.4.1.7571.100.1.1.7.9.3.15 | Counter64 | read-only | current |
| integraEmodemErroredBlock OBJECT-TYPE Modem performance errored blocks | 1.3.6.1.4.1.7571.100.1.1.7.9.3.16 | Counter64 | read-only | current |
| integraEmodemErroredSecond OBJECT-TYPE Modem performance errored seconds | 1.3.6.1.4.1.7571.100.1.1.7.9.3.17 | Counter64 | read-only | current |
| integraEmodemSeverelyErroredSecond OBJECT-TYPE Modem performance severely errored seconds | 1.3.6.1.4.1.7571.100.1.1.7.9.3.18 | Counter64 | read-only | current |
| integraEmodemBackgroundBlockError OBJECT-TYPE Modem performance background block errors | 1.3.6.1.4.1.7571.100.1.1.7.9.3.19 | Counter64 | read-only | current |
| integraEmodemTotalBlockNumber OBJECT-TYPE Modem performance total block number | 1.3.6.1.4.1.7571.100.1.1.7.9.3.20 | Counter64 | read-only | current |
| integraEmodemErroredSecondRatio OBJECT-TYPE Modem performance errored second ratio | 1.3.6.1.4.1.7571.100.1.1.7.9.3.21 | DisplayString | read-only | current |
| integraEmodemSeverelyErroredSecondRatio OBJECT-TYPE Modem performance severely errored second ratio | 1.3.6.1.4.1.7571.100.1.1.7.9.3.22 | DisplayString | read-only | current |
| integraEmodemBackgroundBlockErrorRatio OBJECT-TYPE Modem performance background block error ratio | 1.3.6.1.4.1.7571.100.1.1.7.9.3.23 | DisplayString | read-only | current |
| integraEmodemUptime OBJECT-TYPE Modem performance : uptime | 1.3.6.1.4.1.7571.100.1.1.7.9.3.24 | Counter64 | read-only | current |
| integraEmodemUnavailtime OBJECT-TYPE Modem performance : unavailtime | 1.3.6.1.4.1.7571.100.1.1.7.9.3.25 | Counter64 | read-only | current |
| integraEmodemModulationACMBmin OBJECT-TYPE Minimal modulation for ACMB enabled profile | 1.3.6.1.4.1.7571.100.1.1.7.9.3.26 | DisplayString | read-only | current |
| integraEmodemModulationACMBmax OBJECT-TYPE Maximal modulation for ACMB enabled profile | 1.3.6.1.4.1.7571.100.1.1.7.9.3.27 | DisplayString | read-only | current |
| integraEsystem OBJECT-IDENTITY | 1.3.6.1.4.1.7571.100.1.1.7.9.4 | |||
| integraEsysCPUtemperature OBJECT-TYPE System CPU temperature | 1.3.6.1.4.1.7571.100.1.1.7.9.4.2 | FixedDiv10 | read-only | current |
| integraEsysLicenseExpire OBJECT-TYPE License expires after number of seconds. In the case of -1, check licenseGenStatus status | 1.3.6.1.4.1.7571.100.1.1.7.9.4.3 | Gauge32 | read-only | current |
| integraEsysLicenseGenStatus OBJECT-TYPE License General status. | 1.3.6.1.4.1.7571.100.1.1.7.9.4.4 | INTEGER {ok(1), expired(2), unknown(3), unlimitedTime(4)} | read-only | current |
| integraEsysPSUvoltage OBJECT-TYPE Power voltage in mV | 1.3.6.1.4.1.7571.100.1.1.7.9.4.5 | Integer32 | read-only | current |
| integraEsysPSUcurrent OBJECT-TYPE Power current in mA | 1.3.6.1.4.1.7571.100.1.1.7.9.4.6 | Integer32 | read-only | current |
| integraEsysPSUpower OBJECT-TYPE Power consumption in mW | 1.3.6.1.4.1.7571.100.1.1.7.9.4.7 | Integer32 | read-only | current |
| integraEsysBoardTemperature OBJECT-TYPE System temperature | 1.3.6.1.4.1.7571.100.1.1.7.9.4.8 | FixedDiv10 | read-only | current |
| integraEsysFreeMemory OBJECT-TYPE System free memory | 1.3.6.1.4.1.7571.100.1.1.7.9.4.9 | FixedDiv10 | read-only | current |
| integraEsysCPUidle OBJECT-TYPE System CPU idle | 1.3.6.1.4.1.7571.100.1.1.7.9.4.10 | FixedDiv10 | read-only | current |
| integraEsysDeviceType OBJECT-TYPE Device type name | 1.3.6.1.4.1.7571.100.1.1.7.9.4.11 | DisplayString | read-only | current |
| integraEsysDeviceSerial OBJECT-TYPE Device serial number | 1.3.6.1.4.1.7571.100.1.1.7.9.4.12 | DisplayString | read-only | current |
| integraEsysDeviceProductModel OBJECT-TYPE Device product model code | 1.3.6.1.4.1.7571.100.1.1.7.9.4.13 | DisplayString | read-only | current |
| integraEsysFanError OBJECT-TYPE Device fan 1 error status | 1.3.6.1.4.1.7571.100.1.1.7.9.4.14 | Bits {no(0), fan1(1), unknown(3)} | read-only | current |
| integraEsysXADCtemperature OBJECT-TYPE XADC Temperature | 1.3.6.1.4.1.7571.100.1.1.7.9.4.15 | FixedDiv10 | read-only | current |
| integraEsysVCCint OBJECT-TYPE Vcc INT | 1.3.6.1.4.1.7571.100.1.1.7.9.4.16 | FixedDiv20 | read-only | current |
| integraEsysVCCaux OBJECT-TYPE Vcc AUX | 1.3.6.1.4.1.7571.100.1.1.7.9.4.17 | FixedDiv20 | read-only | current |
| integraEsysVCCbram OBJECT-TYPE Vcc BRAM | 1.3.6.1.4.1.7571.100.1.1.7.9.4.18 | FixedDiv20 | read-only | current |
| integraEsysVCCpint OBJECT-TYPE Vcc PINT | 1.3.6.1.4.1.7571.100.1.1.7.9.4.19 | FixedDiv20 | read-only | current |
| integraEsysVCCpaux OBJECT-TYPE Vcc PAUX | 1.3.6.1.4.1.7571.100.1.1.7.9.4.20 | FixedDiv20 | read-only | current |
| integraEsysVCCoddr OBJECT-TYPE Vcc ODDR | 1.3.6.1.4.1.7571.100.1.1.7.9.4.21 | FixedDiv20 | read-only | current |
| integraEsysXadc6v0AvddMdmAna OBJECT-TYPE XADC_6V0_AVDD_M - Modem Analog | 1.3.6.1.4.1.7571.100.1.1.7.9.4.22 | FixedDiv20 | read-only | current |
| integraEsysXadc1v0AvddSwAna OBJECT-TYPE XADC_1V0_AVDD_S - Switch Analog | 1.3.6.1.4.1.7571.100.1.1.7.9.4.23 | FixedDiv20 | read-only | current |
| integraEsysXadc1v0AvddMdmAna OBJECT-TYPE XADC_1V0_AVDD_M - Modem Analog | 1.3.6.1.4.1.7571.100.1.1.7.9.4.24 | FixedDiv20 | read-only | current |
| integraEsysXadc1v0DvddMdmDig OBJECT-TYPE XADC_1V0_DVDD_M - Modem Digital | 1.3.6.1.4.1.7571.100.1.1.7.9.4.25 | FixedDiv20 | read-only | current |
| integraEsysXadc1v0CoreMdmDig OBJECT-TYPE XADC_1V0_CORE_M - Modem Digital | 1.3.6.1.4.1.7571.100.1.1.7.9.4.26 | FixedDiv20 | read-only | current |
| integraEsysXadc2v5EnvAdcAvddMdmAna OBJECT-TYPE XADC_2V5_ENVADC_AVDD - Modem Analog | 1.3.6.1.4.1.7571.100.1.1.7.9.4.27 | FixedDiv20 | read-only | current |
| integraEsysXadc1v0CoreSwDig OBJECT-TYPE XADC_1V0_CORE_S - Switch Digital | 1.3.6.1.4.1.7571.100.1.1.7.9.4.28 | FixedDiv20 | read-only | current |
| integraEsysXadc5v0IqAvddMdmAna OBJECT-TYPE XADC_5V0_IQ_AVDD - Modem Analog | 1.3.6.1.4.1.7571.100.1.1.7.9.4.29 | FixedDiv20 | read-only | current |
| integraEsysXadc2v5WbDacClAvddMdmAna OBJECT-TYPE XADC_2V5_WBDAC_CL_AVDD - Modem Analog | 1.3.6.1.4.1.7571.100.1.1.7.9.4.30 | FixedDiv20 | read-only | current |
| integraEsysXadc1v2VccPhyDig OBJECT-TYPE XADC_1V2_VCC - PHY Digital | 1.3.6.1.4.1.7571.100.1.1.7.9.4.31 | FixedDiv20 | read-only | current |
| integraEsysXadc4v6AfeDacAvddMdmAna OBJECT-TYPE XADC_4V6_AFE_DAC_AVDD - Modem Analog | 1.3.6.1.4.1.7571.100.1.1.7.9.4.32 | FixedDiv20 | read-only | current |
| integraEsysXadc2v5WbDacAvddMdmAna OBJECT-TYPE XADC_2V5_WBDAC_AVDD - Modem Analog | 1.3.6.1.4.1.7571.100.1.1.7.9.4.33 | FixedDiv20 | read-only | current |
| integraEsysXadc2v5VccSysDig OBJECT-TYPE XADC_2V5_VCC - System Digital | 1.3.6.1.4.1.7571.100.1.1.7.9.4.34 | FixedDiv20 | read-only | current |
| integraEsysXadc3v3VccSysDig OBJECT-TYPE XADC_3V3_VCC - System Digital | 1.3.6.1.4.1.7571.100.1.1.7.9.4.35 | FixedDiv20 | read-only | current |
| integraEsysXadc1v5Ddr3Sw OBJECT-TYPE XADC_1V5_DDR3_S - Switch DDR3 | 1.3.6.1.4.1.7571.100.1.1.7.9.4.36 | FixedDiv20 | read-only | current |
| integraEsysXadc2v5WbAdcAvddMdmAna OBJECT-TYPE XADC_2V5_WBADC_AVDD - Modem Analog | 1.3.6.1.4.1.7571.100.1.1.7.9.4.37 | FixedDiv20 | read-only | current |
| integraEsysXadc2v5WbDacPllAvddMdmAna OBJECT-TYPE XADC_2V5_WBDAC_PLL_AVDD - Modem Analog | 1.3.6.1.4.1.7571.100.1.1.7.9.4.38 | FixedDiv20 | read-only | current |
| integraEethernet OBJECT-IDENTITY | 1.3.6.1.4.1.7571.100.1.1.7.9.5 | |||
| integraEifStatusTable OBJECT-TYPE Network interface port status data. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1 | not-accessible | current | |
| integraEifPortEntry OBJECT-TYPE An entry containing network physical port status info. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1 | not-accessible | current | |
| integraEifPortStatIndex OBJECT-TYPE A unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.1 | Integer32 (1..4) | read-only | current |
| integraEifPortStatDescr OBJECT-TYPE Physical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP and WAN is radio port. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.2 | DisplayString (SIZE(0..255)) | read-only | current |
| integraEifPortType OBJECT-TYPE The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.3 | IANAifType | read-only | current |
| integraEifPortMtu OBJECT-TYPE Maximum transmission unit value in bytes. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.4 | Integer32 | read-only | current |
| integraEifPortHighSpeed OBJECT-TYPE Link speed in 1 000 000 * bits per second. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.5 | Gauge32 | read-only | current |
| integraEifPortPhysAddress OBJECT-TYPE The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.6 | PhysAddress | read-only | current |
| integraEifPortAdminStatus OBJECT-TYPE Desired state of network interfaces. Interfaces can be enabled(1), disabled(2), unknown(3) (no info received). | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.7 | INTEGER {enabled(1), disabled(2), unknown(3)} | read-only | current |
| integraEifPortOperStatus OBJECT-TYPE Actual state of interfaces. Link can be up(1), down(2) or in unknown(3) state. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.8 | INTEGER {up(1), down(2), unknown(3)} | read-only | current |
| integraEifPortLastChange OBJECT-TYPE This parameter value is always 0 at the moment. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.9 | TimeTicks | read-only | current |
| integraEifPortAutoneg OBJECT-TYPE Auto-negotiation status. Unknown means no info was received. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.10 | INTEGER {enabled(1), disabled(2), unknown(3)} | read-only | current |
| integraEifPortDuplex OBJECT-TYPE Duplex status for the interface. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.11 | INTEGER {full(1), half(2), unknown(3)} | read-only | current |
| integraEifPortSyncEthActive OBJECT-TYPE Synchronous Ethernet status. Can be active(1) or inactive(0). | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.12 | INTEGER {off(0), on(1)} | read-only | current |
| integraEifPortSyncEthPrio OBJECT-TYPE Synchronous Ethernet priority. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.13 | Integer32 | read-only | current |
| integraEifPortFlowControl OBJECT-TYPE Flow control status. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.14 | INTEGER {enabled(1), disabled(2), unknown(3)} | read-only | current |
| integraEifStatisticsTable OBJECT-TYPE Network interface port statistics data. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2 | not-accessible | current | |
| integraEifPortStcEntry OBJECT-TYPE An entry containing network physical port statistics counter data. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1 | not-accessible | current | |
| integraEifPortStcIndex OBJECT-TYPE A unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.1 | Integer32 (1..5) | read-only | current |
| integraEifPortStcDescr OBJECT-TYPE Physical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP, WAN is radio port and MNG is internal management interface. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.2 | DisplayString (SIZE(0..255)) | read-only | current |
| integraEifTimePassed OBJECT-TYPE Statistics collection time. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.3 | TimeTicks | read-only | current |
| integraEifIngressPackets OBJECT-TYPE Packets that ingress on the port. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.4 | Counter64 | read-only | current |
| integraEifIngressBytes OBJECT-TYPE Bytes that ingress on the port. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.5 | Counter64 | read-only | current |
| integraEifEgressPackets OBJECT-TYPE Packets that egress on the port. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.6 | Counter64 | read-only | current |
| integraEifEgressBytes OBJECT-TYPE Bytes that egress on the port. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.7 | Counter64 | read-only | current |
| integraEifEtherStatsMulticastPkts OBJECT-TYPE The total number of good packets (both received and transmitted) that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.8 | Counter64 | read-only | current |
| integraEifEtherStatsBroadcastPkts OBJECT-TYPE The total number of good packets (both received and transmitted) that were directed to the broadcast address. Note that this does not include multicast packets. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.9 | Counter64 | read-only | current |
| integraEifEtherStatsPkts64Octets OBJECT-TYPE The total number of packets (including bad packets) (both received and transmitted) that were 64 octets in length (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.10 | Counter64 | read-only | current |
| integraEifEtherStatsPkts65to127Octets OBJECT-TYPE The total number of packets (including bad packets) (both received and transmitted) that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.11 | Counter64 | read-only | current |
| integraEifEtherStatsPkts128to255Octets OBJECT-TYPE The total number of packets (including bad packets) (both received and transmitted) that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.12 | Counter64 | read-only | current |
| integraEifEtherStatsPkts256to511Octets OBJECT-TYPE The total number of packets (including bad packets) (both received and transmitted) that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.13 | Counter64 | read-only | current |
| integraEifEtherStatsPkts512to1023Octets OBJECT-TYPE The total number of packets (including bad packets) (both received and transmitted) that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.14 | Counter64 | read-only | current |
| integraEifEtherStatsPkts1024to1518Octets OBJECT-TYPE The total number of packets (including bad packets) (both received and transmitted) that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.15 | Counter64 | read-only | current |
| integraEifEtherStatsOversizePkts OBJECT-TYPE The number of packets (both received and transmitted) that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.16 | Counter64 | read-only | current |
| integraEifEtherRxOversizePkts OBJECT-TYPE The number of packets received that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.17 | Counter64 | read-only | current |
| integraEifEtherTxOversizePkts OBJECT-TYPE The number of packets transmitted that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.18 | Counter64 | read-only | current |
| integraEifEtherStatsOctets OBJECT-TYPE Total number of octets of data (including those in bad packets) both received and transmitted. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.19 | Counter64 | read-only | current |
| integraEifEtherStatsPkts OBJECT-TYPE Total number of packets (including bad packets) both received and transmitted. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.20 | Counter64 | read-only | current |
| integraEifEtherStatsTXNoErrors OBJECT-TYPE Number of packets that were transmitted without errors. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.21 | Counter64 | read-only | current |
| integraEifEtherStatsRXNoErrors OBJECT-TYPE Number of packets that were received without errors. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.22 | Counter64 | read-only | current |
| integraEifEtherStatsPkts1519to1522Octets OBJECT-TYPE The total number of packets (including bad packets) (both received and transmitted) that were between 1519 and 1522 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.23 | Counter64 | read-only | current |
| integraEifIfInOctets OBJECT-TYPE Total number of octets of data (including those in bad packets) that were received. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.24 | Counter64 | read-only | current |
| integraEifIfOutOctets OBJECT-TYPE Total number of octets of data (including those in bad packets) that were transmitted. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.25 | Counter64 | read-only | current |
| integraEifDot1dTpPortInFrames OBJECT-TYPE The number of frames that have been received by this port from its segment. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.26 | Counter64 | read-only | current |
| integraEifDot1dTpPortOutFrames OBJECT-TYPE The number of frames that have been transmitted by this port to its segment. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.27 | Counter64 | read-only | current |
| integraEifReceivedPkts64Octets OBJECT-TYPE Total number of received packets that were 64 octets in length (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.28 | Counter64 | read-only | current |
| integraEifTransmittedPkts64Octets OBJECT-TYPE Total number of transmitted packets that were 64 octets in length (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.29 | Counter64 | read-only | current |
| integraEifReceivedPkts65to127Octets OBJECT-TYPE Total number of received packets that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.30 | Counter64 | read-only | current |
| integraEifTransmittedPkts65to127Octets OBJECT-TYPE Total number of transmitted packets that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.31 | Counter64 | read-only | current |
| integraEifReceivedPkts128to255Octets OBJECT-TYPE Total number of received packets that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.32 | Counter64 | read-only | current |
| integraEifTransmittedPkts128to255Octets OBJECT-TYPE Total number of transmitted packets that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.33 | Counter64 | read-only | current |
| integraEifReceivedPkts256to511Octets OBJECT-TYPE Total number of received packets that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.34 | Counter64 | read-only | current |
| integraEifTransmittedPkts256to511Octets OBJECT-TYPE Total number of transmitted packets that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.35 | Counter64 | read-only | current |
| integraEifReceivedPkts512to1023Octets OBJECT-TYPE Total number of received packets that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.36 | Counter64 | read-only | current |
| integraEifTransmittedPkts512to1023Octets OBJECT-TYPE Total number of transmitted packets that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.37 | Counter64 | read-only | current |
| integraEifReceivedPkts1024to1518Octets OBJECT-TYPE Total number of received packets that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.38 | Counter64 | read-only | current |
| integraEifTransmittedPkts1024to1518Octets OBJECT-TYPE Total number of transmitted packets that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets). | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.39 | Counter64 | read-only | current |
| integraEifIfInBroadcastPkts OBJECT-TYPE The total number of received good packets that were directed to the broadcast address. Note that this does not include multicast packets. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.40 | Counter64 | read-only | current |
| integraEifIfOutBroadcastPkts OBJECT-TYPE The total number of transmitted good packets that were directed to the broadcast address. Note that this does not include multicast packets. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.41 | Counter64 | read-only | current |
| integraEifIfInMulticastPkts OBJECT-TYPE The total number of received good packets that were directed to a multicast address. Note that this number does not include broadcast packets. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.42 | Counter64 | read-only | current |
| integraEifIfOutMulticastPkts OBJECT-TYPE The total number of transmitted good packets that were directed to a multicast address. Note that this number does not include broadcast packets. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.43 | Counter64 | read-only | current |
| integraEifDot3InPauseFrames OBJECT-TYPE A count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.44 | Counter64 | read-only | current |
| integraEifDot3OutPauseFrames OBJECT-TYPE A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.45 | Counter64 | read-only | current |
| integraEifEtherStatsUndersizePkts OBJECT-TYPE The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.46 | Counter64 | read-only | current |
| integraEifEtherStatsFragments OBJECT-TYPE The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherStatsFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.47 | Counter64 | read-only | current |
| integraEifEtherStatsCRCAlignErrors OBJECT-TYPE The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.48 | Counter64 | read-only | current |
| integraEifEtherStatsJabbers OBJECT-TYPE The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.49 | Counter64 | read-only | current |
| integraEifIngressBPS OBJECT-TYPE Ingoing data transfer rate in bytes per second. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.50 | Integer32 | read-only | current |
| integraEifIngressPPS OBJECT-TYPE Ingoing data transfer rate in packets per second. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.51 | Integer32 | read-only | current |
| integraEifEgressBPS OBJECT-TYPE Outgoing data transfer rate in bytes per second. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.52 | Integer32 | read-only | current |
| integraEifEgressPPS OBJECT-TYPE Outgoing data transfer rate in packets per second. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.53 | Integer32 | read-only | current |
| integraEifAllCoSQoutPackets OBJECT-TYPE All CoSQ outgoing packets. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.54 | Counter64 | read-only | current |
| integraEifAllCoSQoutBytes OBJECT-TYPE All CoSQ outgoing bytes. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.55 | Counter64 | read-only | current |
| integraEifAllCoSQdroppedPackets OBJECT-TYPE All CoSQ dropped packets. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.56 | Counter64 | read-only | current |
| integraEifAllCoSQdroppedBytes OBJECT-TYPE All CoSQ dropped bytes. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.57 | Counter64 | read-only | current |
| integraEifProcessedRxPackets OBJECT-TYPE Processed received packets. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.58 | Counter64 | read-only | current |
| integraEifProcessedRxBytes OBJECT-TYPE Processed received bytes. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.59 | Counter64 | read-only | current |
| integraEifLspPortAdminState OBJECT-TYPE LSP port status. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.3 | INTEGER {disabled(1), lsp(2), backup(3), unknown(4)} | read-only | current |
| integraEifLspPortList OBJECT-TYPE LSP port status. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.4 | Bits {none(0), lan1(1), lan2(2), lan3(3)} | read-only | current |
| integraEifLspPortStatus OBJECT-TYPE LSP port status. | 1.3.6.1.4.1.7571.100.1.1.7.9.5.5 | INTEGER {lspPortOK(1), lspPortDownBlockedByLSP(2), backupNoLink(3), backupLinkActive(4), backupLinkReady(5), unknown(6)} | read-only | current |
| integraEexecuteConfig OBJECT-TYPE This object can only be set to 1. It initiates new running configuration applying using values, that have been set before. Setting it when no new changes are available will do nothing and return an error. GET will return 0 if there were no errors, while executing configuration or will return a bitmask, that shows which SET requests have failed. Those failed requests will be shown bit wise from LSB as follows: BIT0 radioTxMuteDuration BIT1 radioTxFrequency BIT2 radioTxPower | 1.3.6.1.4.1.7571.100.1.1.7.9.6 | INTEGER {execute(1)} | read-write | current |
| integraEneedStore OBJECT-TYPE This object shows if there is unsaved, but executed (running) configuration. Unsaved changes will be lost after device reboot. Unsaved entities are shown bit wise, starting from LSB as follows: BIT0 Aggregation BIT1 Event log BIT2 Modem BIT3 Network BIT4 Performance BIT5 Radio BIT6 SNMP BIT7 Synchronous Ethernet BIT8 System | 1.3.6.1.4.1.7571.100.1.1.7.9.7 | INTEGER {no(0)} | read-only | current |
| integraEstoreConfig OBJECT-TYPE This object can only be set to 1. It initiates saving of running configuration. It will only work if there are unsaved, but executed (running) changes (configuration). Setting it when no new running configuration is available will do nothing and return an error. | 1.3.6.1.4.1.7571.100.1.1.7.9.8 | INTEGER {store(1)} | read-write | current |
| integraEnetCfg OBJECT-IDENTITY | 1.3.6.1.4.1.7571.100.1.1.7.9.9 | |||
| integraEnetCfgIPaddress OBJECT-TYPE Local IP address | 1.3.6.1.4.1.7571.100.1.1.7.9.9.1 | DisplayString | read-write | current |
| integraEnetCfgIPmask OBJECT-TYPE Local IP mask | 1.3.6.1.4.1.7571.100.1.1.7.9.9.2 | DisplayString | read-write | current |
| integraEnetCfgIPgateway OBJECT-TYPE IP gateway Send '0' or '255.255.255.255' to clear. | 1.3.6.1.4.1.7571.100.1.1.7.9.9.3 | DisplayString | read-write | current |
| integraEnetCfgRemoteIPaddress OBJECT-TYPE Remote IP address | 1.3.6.1.4.1.7571.100.1.1.7.9.9.4 | DisplayString | read-only | current |
| integraEConformance OBJECT-IDENTITY | 1.3.6.1.4.1.7571.100.1.1.7.9.10 | |||
| integraECompliances OBJECT-IDENTITY | 1.3.6.1.4.1.7571.100.1.1.7.9.10.1 | |||
| integraEGroups OBJECT-IDENTITY | 1.3.6.1.4.1.7571.100.1.1.7.9.10.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| integraECompliance MODULE-COMPLIANCE The compliance statement for SNMP engine which implements the SAF Tehnika Integra-E device. | 1.3.6.1.4.1.7571.100.1.1.7.9.10.1.1 | current |
| integraEMiscGroup OBJECT-GROUP misc data | 1.3.6.1.4.1.7571.100.1.1.7.9.10.2.1 | current |
| integraERadioGroup OBJECT-GROUP Radio group. | 1.3.6.1.4.1.7571.100.1.1.7.9.10.2.2 | current |
| integraEModemGroup OBJECT-GROUP Modem group. | 1.3.6.1.4.1.7571.100.1.1.7.9.10.2.3 | current |
| integraESystemGroup OBJECT-GROUP System group. | 1.3.6.1.4.1.7571.100.1.1.7.9.10.2.4 | current |
| integraEEthernetGeneralGroup OBJECT-GROUP A collection to objects, providing info applicable to all network interfaces. | 1.3.6.1.4.1.7571.100.1.1.7.9.10.2.5 | current |
| integraEEthernetMiiPortGroup OBJECT-GROUP A collection of objects, providing info applicable only to MII group interfaces. | 1.3.6.1.4.1.7571.100.1.1.7.9.10.2.6 | current |