MIBs Depot

SAEUROPE-DCM-MIB

Registered at
1.3.6.1.4.1.1482.1.3.2.2.1
1.3.6.1.4.1.1482.20.3.2.2.1
1.3.6.1.4.1.1482.20.3.2.2.3
Last updated
2012-06-14 13:00
Organization
Synamedia
Revisions
2006-02-16 14:40, 2006-10-11 14:58, 2006-12-04 13:00, 2006-12-21 13:00, 2007-01-05 13:00, 2007-05-24 13:00, 2007-11-13 13:00, 2008-01-14 13:00, 2009-01-13 13:00, 2009-10-13 13:00, 2010-01-15 13:00, 2011-05-27 13:00, 2012-03-02 13:00, 2012-06-14 13:00, 2013-07-12 13:00
Namespace
saeurope
Source file
SAEUROPE-DCM-MIB
Digest
sha256:6eea0f5ccd2b5bbdccc3e0a08d7d71ef0331d4e05a8560736878de1946875050

Description

MIB for the DCM device. In all the tables in this MIB, UNDO is not guaranteed to work on a row destruction. i.e. if you destroy a row and simultaneously do something else that fails, it is not guaranteed that the row will be restored, and if it is restored, it might have changed.

Contact

https://www.synamedia.com/video-professional-services/

Imports

FromSymbols
SAEUROPE-ROOT-MIBtsProcessors, tsProcessorsMIBGroups
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

SAEUROPE-DCM-MIB
SAEUROPE-ROOT-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
dcmMibGroups
OBJECT-IDENTITY
1.3.6.1.4.1.1482.1.3.2.2.1
dcmMIB
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3
dcmSettings
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.1
dcmMuxSettings
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.1.1
dcmInputTransportStreamTable
OBJECT-TYPE
This table contains the transport streams present at the input ports of the DCM.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.1not-accessiblecurrent
dcmInputTransportStreamEntry
OBJECT-TYPE
Conceptual row of the dcmInputTransportStreamTable.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.1.1not-accessiblecurrent
dcmInputTsIndex
OBJECT-TYPE
Identification of the input transport stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.1.1.1Integer32 (100000000..999999999)not-accessiblecurrent
dcmInputTsBoard
OBJECT-TYPE
Identification of the board where the service is coming in.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.1.1.2Integer32 (1..4)read-onlycurrent
dcmInputTsPort
OBJECT-TYPE
Identification of the port where the service is coming in. For ASI boards port numbers range from 1..10 For GbE boards port numbers can range from 1..4. Only 1 and 3 can be used (2 and 4 are backup ports)
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.1.1.3Integer32 (1..10)read-onlycurrent
dcmInputTsUdpPort
OBJECT-TYPE
For an input TS on a GbE board, this is the identification of the UDP port. For an input TS on an ASI board this object will be 0.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.1.1.4Integer32 (0..65535)read-onlycurrent
dcmInputTsIpAddress
OBJECT-TYPE
For an input transport stream on a GbE board, this is the destination (multicast) IP address of the stream containing the input service. For an input TS on an ASI board this object will be 0.0.0.0.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.1.1.5IpAddressread-onlycurrent
dcmInputTsSrcIpAddress
OBJECT-TYPE
For an input transport stream on a GbE board, this is the source IP address of the stream containing the input service. If the source IP address of a GbE input transport stream is not known, or when the input transport stream arrives on an ASI board, then the IP address 0.0.0.0 will be returned.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.1.1.6IpAddressread-onlycurrent
dcmConfigInputTsTable
OBJECT-TYPE
This table contains the transport streams present at the input ports of the DCM, and allows preconfiguration of input streams.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.2not-accessiblecurrent
dcmConfigInputTsEntry
OBJECT-TYPE
Conceptual row of the dcmConfigInputTsTable.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.2.1not-accessiblecurrent
dcmCfgInputTsBoard
OBJECT-TYPE
Identification of the board where the service is coming in.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.2.1.1Integer32 (1..4)not-accessiblecurrent
dcmCfgInputTsPort
OBJECT-TYPE
Identification of the port where the service is coming in. For ASI boards port numbers range from 1..10 For GbE boards port numbers can range from 1..4. Only 1 and 3 can be used (2 and 4 are backup ports)
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.2.1.2Integer32 (1..10)not-accessiblecurrent
dcmCfgInputTsUdpPort
OBJECT-TYPE
For an input TS on a GbE board, this is the identification of the UDP port. For an input TS on an ASI board, specify 0.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.2.1.3Integer32 (0..65535)not-accessiblecurrent
dcmCfgInputTsIpAddress
OBJECT-TYPE
For an input transport stream on a GbE board, this is the destination (multicast) IP address of the stream containing the input service. For an input TS on an ASI board, specify 0.0.0.0.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.2.1.4IpAddressnot-accessiblecurrent
dcmCfgInputTsIndex
OBJECT-TYPE
Identification of the input transport stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.2.1.5Integer32 (100000000..999999999)read-onlycurrent
dcmCfgInputTsSrcIpAddress
OBJECT-TYPE
For an input transport stream on a GbE board, this is the source IP address of the stream containing the input service(s). If the source IP address of a GbE input transport stream is not known, or when the input transport stream arrives on an ASI board, then the IP address 0.0.0.0 will be returned.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.2.1.6IpAddressread-onlycurrent
dcmCfgInputTsRowStatus
OBJECT-TYPE
Rowstatus column that allows to preconfigure an input transport stream. Can only support one-shot creation and deletion (createAndGo(4)/destroy(6)) SNMP UNDO of a destroy might fail.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.2.1.7RowStatusread-createcurrent
dcmCfgInputTsState
OBJECT-TYPE
State of the input transport stream, based on TS-Loss alarm.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.2.1.8INTEGER {present(1), notPresent(2)}read-onlycurrent
dcmOutputTransportStreamTable
OBJECT-TYPE
Table with the output transport streams. This table contains both actual and preconfigured transport streams.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.3not-accessiblecurrent
dcmOutputTransportStreamEntry
OBJECT-TYPE
Conceptual row of the dcmOutputTransportStreamTable.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.3.1not-accessiblecurrent
dcmOutputTsIndex
OBJECT-TYPE
Identification of the outgoing transport stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.3.1.1Integer32 (100000000..999999999)not-accessiblecurrent
dcmOutputTsBoard
OBJECT-TYPE
Identification of the board where output transport stream is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.3.1.2Integer32 (1..4)read-onlycurrent
dcmOutputTsPort
OBJECT-TYPE
Identification of the outgoing port.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.3.1.3Integer32 (1..10)read-onlycurrent
dcmOutputTsUdpPort
OBJECT-TYPE
Destination UDP port in case of a GbE stream. This object will be 0 for ASI streams.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.3.1.4Integer32 (0..65535)read-writecurrent
dcmOutputTsIpAddress
OBJECT-TYPE
Destination IP address in case of a GbE stream. This object will be 0.0.0.0 for ASI streams.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.3.1.5IpAddressread-writecurrent
dcmOutputTsTransportStreamId
OBJECT-TYPE
For GbE transport streams, the transport stream ID (TSID) of the output transport stream. For ASI transport streams there is no instance of this object.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.3.1.6Integer32 (0..65535)read-writecurrent
dcmOutputTsOriginalNetworkId
OBJECT-TYPE
For GbE transport streams, the Original Network ID (ONID) of the output transport stream. For ASI transport streams there is no instance of this object.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.3.1.7Integer32 (0..65535)read-writecurrent
dcmOutputTsStandard
OBJECT-TYPE
Transport stream setting - PMT generation standard. Values between transparent and forceUpLink result in undefined behaviour.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.3.1.8INTEGER {transparent(1), forceUpLink(5), forceVideo(6), forceAudio3(7)}read-writecurrent
dcmOutputTsActive
OBJECT-TYPE
Transport stream active or not.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.3.1.9INTEGER {active(1), notActive(2)}read-writecurrent
dcmOutputTsTransportStreamBitRate
OBJECT-TYPE
Transport stream bit rate.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.3.1.10Integer32read-writecurrent
dcmConfigOutputTsTable
OBJECT-TYPE
Table with the transport streams defined at the output ports of the DCM device. This table contains both regular transport streams and preconfigured transport streams.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.4not-accessiblecurrent
dcmConfigOutputTsEntry
OBJECT-TYPE
.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.4.1not-accessiblecurrent
dcmCfgOutputTsBoard
OBJECT-TYPE
Identification of the board where output transportstream is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.4.1.1Integer32 (1..4)not-accessiblecurrent
dcmCfgOutputTsPort
OBJECT-TYPE
Identification of the outgoing port.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.4.1.2Integer32 (1..10)not-accessiblecurrent
dcmCfgOutputTsUdpPort
OBJECT-TYPE
Destination UDP port in case of GbE stream, and 0 for an ASI stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.4.1.3Integer32 (0..65535)not-accessiblecurrent
dcmCfgOutputTsIpAddress
OBJECT-TYPE
Destination IP address in case of GbE stream, and 0.0.0.0 for an ASI stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.4.1.4IpAddressnot-accessiblecurrent
dcmCfgOutputTsIndex
OBJECT-TYPE
Transport stream index of the output transport stream (dcmTsIndex).
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.4.1.5Integer32 (100000000..999999999)read-onlycurrent
dcmCfgOutputTsTransportStreamId
OBJECT-TYPE
For GbE transpor streams, the transport stream ID (TSID) of the output transport stream. For ASI transport streams there is no instance of this object.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.4.1.6Integer32 (0..65535)read-createcurrent
dcmCfgOutputTsOriginalNetworkId
OBJECT-TYPE
For GbE transport streams, the Original Network ID (ONID) of the output transport stream. For ASI transport streams there is no instance of this object.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.4.1.7Integer32 (0..65535)read-createcurrent
dcmCfgOutputTsStandard
OBJECT-TYPE
Transport stream setting - PMT generation standard.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.4.1.8INTEGER {transparent(1), dvb(2), atsc(3), motorola(4), forceUpLink(5), forceVideo(6), forceAudio3(7)}read-createcurrent
dcmCfgOutputTsActive
OBJECT-TYPE
Transport stream active or not.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.4.1.9INTEGER {active(1), notActive(2)}read-createcurrent
dcmCfgOutputTsTransportStreamBitRate
OBJECT-TYPE
Transport stream bit rate.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.4.1.10Integer32read-createcurrent
dcmCfgOutputTsRowStatus
OBJECT-TYPE
Rowstatus column to create an outgoing transport stream. Supports only one-shot creation and deletion (createAndGo(4)/destroy(6)) SNMP UNDO of a destroy might fail. Current defaults for omitted columns in createAndGo: 40Mbit, notActive, transparent, ONID=TSID=1 But don't rely on these defaults.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.4.1.11RowStatusread-createcurrent
dcmConfigServiceTable
OBJECT-TYPE
Table with the services routed from input to output. This table contains one row for each service present at one of the DCM's output ports. If the same services is passed two or more times to one output transport stream only the first is shown. In that case it will not be possible to update the configuration for that service.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.5not-accessiblecurrent
dcmConfigServiceEntry
OBJECT-TYPE
Conceptual row of dcmConfigServiceTable
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.5.1not-accessiblecurrent
dcmCfgSrvInputTsIndex
OBJECT-TYPE
Identification of the stream where the service is coming in.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.5.1.1Integer32 (100000000..999999999)not-accessiblecurrent
dcmCfgSrvInputServiceID
OBJECT-TYPE
The service ID (PAT programme number) of the input service.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.5.1.2Integer32 (0..65535)not-accessiblecurrent
dcmCfgSrvOutputTsIndex
OBJECT-TYPE
Identification of the stream where the service is going to.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.5.1.3Integer32 (100000000..999999999)not-accessiblecurrent
dcmCfgSrvForceOutputServiceID
OBJECT-TYPE
Overrule the incoming service ID.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.5.1.4TruthValueread-createcurrent
dcmCfgSrvOutputServiceID
OBJECT-TYPE
Output service ID (PAT programme number) of the stream. Only settable if dcmCfgSrvForceOutputServiceID is true
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.5.1.5Integer32 (0..65535)read-createcurrent
dcmCfgSrvForceOutputServiceName
OBJECT-TYPE
Overrule the incoming service name.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.5.1.6TruthValueread-createcurrent
dcmCfgSrvOutputServiceName
OBJECT-TYPE
Overrule the incoming service name. Only settable if dcmCfgSrvForceOutputServiceName is true. You can put here international characters and markup, if you use the correct DVB SI bytes (charset and so on)
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.5.1.7OCTET STRINGread-createcurrent
dcmCfgSrvRowStatus
OBJECT-TYPE
Rowstatus column to create a service configuration Can only support one-shot creation and deletion (createAndGo(4)/destroy(6)) SNMP UNDO of a destroy might fail. Current defaults for omitted columns in createAndGo: both Force flags false But don't rely on these defaults.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.5.1.8RowStatusread-createcurrent
dcmCfgSrvState
OBJECT-TYPE
State of the output service, based on Service-loss-at-output alarm.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.5.1.9INTEGER {present(1), notPresent(2)}read-onlycurrent
dcmTsAutoPassTable
OBJECT-TYPE
Table with the auto pass configuration. This in an output TS feature. See the DCM manual for more info on the applications and limitations of this feature.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.6not-accessiblecurrent
dcmTsAutoPassEntry
OBJECT-TYPE
Conceptual row of the dcmTsAutoPassTable. A number of auto pass rules can be defined for an output TS (MPTS pass through), by creating a row with index dcmOutputTsIndex,dcmInputTsIndex. These rules specify from which input TS all Services, EMMs and/or unreferenced PIDs should be passed to an output TS. Disclaimers: 1) Only one AutoPass input TS is supported for a specific output TS. If rows are created with the same dcmOutputTsIndex, but with different dcmInputTsIndex, the behaviour is undefined. 2) If all three flags of a dcmTsAutoPassEntry are disabled, the behaviour is undefined. To remove the autopass settings for dcmTsAutoPassEntry, the row should be destroyed. 3) If dcmInputTsIndex does not exists, it is not guaranteed that an error is returned.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.6.1not-accessiblecurrent
dcmTsAutoPassNewServices
OBJECT-TYPE
If true, any service detected in the PAT of the Input Ts will be automatically passed to this OutputTs. If you clear this flag, any automatically passed service remains passed.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.6.1.1TruthValueread-createcurrent
dcmTsAutoPassNewEMMs
OBJECT-TYPE
If true, any emm detected in the CAT of the Input Ts will be automatically passed to this OutputTs. If you clear this flag, any automatically passed emm remains passed.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.6.1.2TruthValueread-createcurrent
dcmTsAutoPassUnreferencedPIDs
OBJECT-TYPE
If true, any unreferenced pid detected in the Input Ts will be automatically passed to this OutputTs. If you clear this flag, any automatically passed unreferenced pid disappears again.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.6.1.3TruthValueread-createcurrent
dcmTsAutoPassRowStatus
OBJECT-TYPE
Rowstatus column to enable AutoPass. Supports only one-shot creation and deletion (createAndGo(4)/destroy(6)) SNMP UNDO of a destroy might fail.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.6.1.4RowStatusread-createcurrent
dcmConfigTransparentOutputTsTable
OBJECT-TYPE
Table with the transparent transport streams defined at the output ports of the DCM device. This table contains both regular transparent transport streams and preconfigured transparent transport streams.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.7not-accessiblecurrent
dcmConfigTransparentOutputTsEntry
OBJECT-TYPE
.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.7.1not-accessiblecurrent
dcmCfgTransparentOutputTsBoard
OBJECT-TYPE
Identification of the board where output transportstream is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.7.1.1Integer32 (1..4)not-accessiblecurrent
dcmCfgTransparentOutputTsPort
OBJECT-TYPE
Identification of the outgoing port.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.7.1.2Integer32 (1..10)not-accessiblecurrent
dcmCfgTransparentOutputTsUdpPort
OBJECT-TYPE
Destination UDP port in case of GbE stream, and 0 for an ASI stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.7.1.3Integer32 (0..65535)not-accessiblecurrent
dcmCfgTransparentOutputTsIpAddress
OBJECT-TYPE
Destination IP address in case of GbE stream, and 0.0.0.0 for an ASI stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.7.1.4IpAddressnot-accessiblecurrent
dcmCfgTransparentSourceTsIndex
OBJECT-TYPE
Transport stream index of the source transport stream (dcmTsIndex).
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.7.1.5Integer32 (100000000..999999999)not-accessiblecurrent
dcmCfgTransparentOutputTsIndex
OBJECT-TYPE
Transport stream index of the output transport stream (dcmTsIndex).
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.7.1.6Integer32 (100000000..999999999)read-onlycurrent
dcmCfgTransparentOutputTsActive
OBJECT-TYPE
Transport stream active or not.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.7.1.7INTEGER {active(1), notActive(2)}read-createcurrent
dcmCfgTransparentOutputTsRowStatus
OBJECT-TYPE
Rowstatus column to create an outgoing transport stream. Supports only one-shot creation and deletion (createAndGo(4)/destroy(6)) SNMP UNDO of a destroy might fail.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.7.1.8RowStatusread-createcurrent
dcmServiceBackup
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8
dcmServiceBackupByBoardTable
OBJECT-TYPE
Trigger service backup or revert to the main service for all services on a board. It is not possible to read the status: it will always return 'unknown'.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.1not-accessiblecurrent
dcmServiceBackupByBoardEntry
OBJECT-TYPE
.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.1.1not-accessiblecurrent
dcmServiceBackupByBoardBoard
OBJECT-TYPE
Identification of the board where service backup can be activated or reverted.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.1.1.1Integer32 (1..4)not-accessiblecurrent
dcmServiceBackupByBoardStatus
OBJECT-TYPE
Service backup mode.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.1.1.2INTEGER {unknown(1), main(2), backup(3)}read-writecurrent
dcmServiceBackupByTsTable
OBJECT-TYPE
Trigger service backup or revert to the main service for all services in a TS. It is not possible to read the status: it will always return 'unknown'.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.2not-accessiblecurrent
dcmServiceBackupByTsEntry
OBJECT-TYPE
.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.2.1not-accessiblecurrent
dcmServiceBackupByTsTsIndex
OBJECT-TYPE
Identification of the TS where service backup can be activated or reverted.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.2.1.1Integer32 (100000000..999999999)not-accessiblecurrent
dcmServiceBackupByTsStatus
OBJECT-TYPE
Service backup mode.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.2.1.2INTEGER {unknown(1), main(2), backup(3)}read-writecurrent
dcmServiceBackupSettingsTable
OBJECT-TYPE
Table with settings for service backup.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.3not-accessiblecurrent
dcmServiceBackupSettingsEntry
OBJECT-TYPE
Conceptual row of dcmServiceBackupSettingsTable
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.3.1not-accessiblecurrent
dcmSrvBuSettingsTsIndex
OBJECT-TYPE
Identification of the transport stream of the output service.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.3.1.1Integer32 (100000000..999999999)not-accessiblecurrent
dcmSrvBuSettingsServiceID
OBJECT-TYPE
The service ID (PAT programme number) of the output service.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.3.1.2Integer32 (0..65535)not-accessiblecurrent
dcmSrvBuSettingsBehavior
OBJECT-TYPE
Behavior of the backup: - non revertive: when switched to lower priority backup service, manual switch is needed to return to higher priority input service. - revertive: when switched to lower priority backup service, return to higher priority input service when one is present. - floating: when switched to lower priority backup service, return to higher priority input service when one is present and the current active input service is not present.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.3.1.3INTEGER {nonRevertive(1), revertive(2), floating(3)}read-writecurrent
dcmSrvBuSettingsToBackupDelay
OBJECT-TYPE
The delay in seconds before a lower priority backup service is chosen when the active service is not present anymore.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.3.1.4Integer32 (0..2147483647)read-writecurrent
dcmSrvBuSettingsToMainDelay
OBJECT-TYPE
The delay in seconds before a higher priority backup service is chosen when: - revertive: a higher priority input service becomes present - floating: the active service is not present anymore and a higher priority input service is present.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.3.1.5Integer32 (0..2147483647)read-writecurrent
dcmSrvBuSettingsState
OBJECT-TYPE
Read out the current state and select main (selecting a backup service must be done in de backup service table, setting the value to backup will be ignored).
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.3.1.6INTEGER {main(1), backup(2)}read-writecurrent
dcmServiceBackupServicesTable
OBJECT-TYPE
Table with list of backup services, the order of the list defines the priority: when the main input service is not present anymore, the first backup service will be active when present. Remark: because snmp does not have support for merged in services and alternate services, this table does not support back up for them. At the moment of writing, the maximum backup services per output service is 1.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.4not-accessiblecurrent
dcmServiceBackupServicesEntry
OBJECT-TYPE
Conceptual row of dcmServiceBackupSettingsTable
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.4.1not-accessiblecurrent
dcmSrvBuOutputSrvTsIndex
OBJECT-TYPE
Identification of the transport stream of the output service.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.4.1.1Integer32 (100000000..999999999)not-accessiblecurrent
dcmSrvBuOutputSrvServiceID
OBJECT-TYPE
The service ID (PAT programme number) of the output service.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.4.1.2Integer32 (0..65535)not-accessiblecurrent
dcmSrvBuBuSrvTsIndex
OBJECT-TYPE
Identification of the transport stream of the backup service.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.4.1.3Integer32 (100000000..999999999)not-accessiblecurrent
dcmSrvBuBuSrvServiceID
OBJECT-TYPE
The service ID (PAT programme number) of the backup service.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.4.1.4Integer32 (0..65535)not-accessiblecurrent
dcmSrvBuBuSrvState
OBJECT-TYPE
Read out the current state and select the backup service by setting the value to active (setting the value to notActive will be ignored).
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.4.1.5INTEGER {active(1), notActive(2)}read-writecurrent
dcmSrvBuRowStatus
OBJECT-TYPE
Adding a row creates a new backup service for the output service. Deleting the row removes the backup service from the output service. The only way to define a higher priority backup service is to delete the lower priority backup services, add the new backup services and add the lower priority backup services again.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.8.4.1.6RowStatusread-createcurrent
dcmTsBackup
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.9
dcmTsBackupSettingsTable
OBJECT-TYPE
Table with settings for ts backup.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.9.1not-accessiblecurrent
dcmTsBackupSettingsEntry
OBJECT-TYPE
Conceptual row of dcmTsBackupSettingsTable
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.9.1.1not-accessiblecurrent
dcmTsBuSettingsTsIndex
OBJECT-TYPE
Identification of the input transport stream that needs to be backed up.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.9.1.1.1Integer32 (100000000..999999999)not-accessiblecurrent
dcmTsBuSettingsBuTsIndex
OBJECT-TYPE
Identification of the backup transport stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.9.1.1.2Integer32 (100000000..999999999)read-writecurrent
dcmTsBuSettingsBehavior
OBJECT-TYPE
Behavior of the backup: - non revertive: when switched to backup ts, manual switch is needed to return to main ts. - revertive: when switched to backup ts, return to main ts when it is present. - floating: when switched to other active ts, return to original active ts when one is present and the current active ts is not present.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.9.1.1.3INTEGER {nonRevertive(1), revertive(2), floating(3)}read-writecurrent
dcmTsBuSettingsToBackupDelay
OBJECT-TYPE
The delay in seconds before switching to backup when the main ts is not present anymore.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.9.1.1.4Integer32 (0..2147483647)read-writecurrent
dcmTsBuSettingsToMainDelay
OBJECT-TYPE
The delay in seconds before switching back to main ts when: - revertive: main ts becomes present.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.9.1.1.5Integer32 (0..2147483647)read-writecurrent
dcmTsBuSettingsState
OBJECT-TYPE
Read out the current state and select a new backup state.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.9.1.1.6INTEGER {main(1), backup(2)}read-writecurrent
dcmTsBuSettingsRowStatus
OBJECT-TYPE
Adding a row defines a backup transport stream for a main transport stream. Deleting a row indicates that the transport stream will not be backed up
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.9.1.1.7RowStatusread-createcurrent
dcmInputServiceTable
OBJECT-TYPE
Table with input service state
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.10not-accessiblecurrent
dcmInputServiceEntry
OBJECT-TYPE
Conceptual row of dcmInputServiceTable
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.10.1not-accessiblecurrent
dcmInputSrvTsIndex
OBJECT-TYPE
Identification of the transport stream of the input service.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.10.1.1Integer32 (100000000..999999999)not-accessiblecurrent
dcmInputSrvServiceID
OBJECT-TYPE
The service ID (PAT programme number) of the input service.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.10.1.2Integer32 (0..65535)not-accessiblecurrent
dcmInputSrvName
OBJECT-TYPE
The name of the input service: extra information to find out the services at the input.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.10.1.3OCTET STRINGread-onlycurrent
dcmInputSrvState
OBJECT-TYPE
State of the input service, based on the Service-Loss alarm.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.10.1.4INTEGER {present(1), notPresent(2)}read-onlycurrent
dcmProcessingServiceTable
OBJECT-TYPE
Table with mapping of internal reference to usertag of processing services (not at input/output, e.g. for transcoding)
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.11not-accessiblecurrent
dcmProcessingServiceEntry
OBJECT-TYPE
Conceptual row of dcmProcessingServiceTable
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.11.1not-accessiblecurrent
dcmProcessingSrvTsIndex
OBJECT-TYPE
Internal Identification of the transport stream of the Processing service.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.11.1.1Integer32 (100000000..999999999)not-accessiblecurrent
dcmProcessingSrvServiceID
OBJECT-TYPE
Internal service ID of the Processing service.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.11.1.2Integer32 (0..65535)not-accessiblecurrent
dcmProcessingSrvName
OBJECT-TYPE
The usertag of the Processing service: external reference of the Processing service.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.11.1.3OCTET STRINGread-onlycurrent
dcmProcessingSrvState
OBJECT-TYPE
State of the Processing service, based on the Service-Loss alarm.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.11.1.4INTEGER {present(1), notPresent(2)}read-onlycurrent
dcmDvbS2InputStreamTable
OBJECT-TYPE
Table with DvbS2 input stream mapping (ISI to transport stream index)
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.12not-accessiblecurrent
dcmDvbS2InputStreamEntry
OBJECT-TYPE
Conceptual row of dcmDvbS2InputStreamTable
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.12.1not-accessiblecurrent
dcmDvbS2InputStreamTsIndex
OBJECT-TYPE
Identification of the transport stream of the DvbS2 input stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.12.1.1Integer32 (100000000..999999999)not-accessiblecurrent
dcmDvbS2InputStreamISI
OBJECT-TYPE
Input Stream Identifier in a DvbS2 multistream (65535: no multistream).
1.3.6.1.4.1.1482.20.3.2.2.3.1.1.12.1.2Integer32 (0..65535)read-onlycurrent
dcmTrSettings
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.1.2
dcmTrGroupTable
OBJECT-TYPE
The transrater group table keeps an overview of all defined transrater groups per board over a DCM.
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.1not-accessiblecurrent
dcmTrGroupEntry
OBJECT-TYPE
A row of the table holds all the objects that characterize an MPEG program stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.1.1not-accessiblecurrent
dcmTrGroupBoardNumber
OBJECT-TYPE
Identification of the (output) board where the transrater group is associated to.
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.1.1.1Integer32 (1..4)not-accessiblecurrent
dcmTrGroupPortNumber
OBJECT-TYPE
Identification of the (output) port where the transrater group is associated to.
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.1.1.2Integer32 (1..10)not-accessiblecurrent
dcmTrGroupId
OBJECT-TYPE
Identification of the transrater group given board and port.
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.1.1.3Integer32 (2..501)not-accessiblecurrent
dcmTrGroupOutputTs
OBJECT-TYPE
For sPTS transrating groups, set this number to 999999999. For mPTS and mPTSSelectiveService groups, this is the identification of the output transport stream the transrater group is associated to.
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.1.1.4Integer32 (100000000..999999999)not-accessiblecurrent
dcmTrGroupBitRate
OBJECT-TYPE
Maximal transrater group bitrate
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.1.1.5Integer32read-createcurrent
dcmTrGroupType
OBJECT-TYPE
Type of transrating group. A transrater group is of one of the following types: sPTS: A transrating group containing zero or more MPEG-2 transport streams. Each transport streams contains a single program (service). mPTS: A transrating group containing exactly one MPEG-2 transport stream. The transport stream contains zero or more programs (services). mPTSSelectiveService: A transrating group that contains zero or more programs (services). This group subordinates to a transport stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.1.1.6INTEGER {sPTS(1), mPTS(2), mPTSSelectiveService(3)}read-createcurrent
dcmTrGroupRowStatus
OBJECT-TYPE
RowStatus to create a group Can only support one-shot creation and deletion (createAndGo(4)/destroy(6)) SNMP UNDO of a destroy might fail. dcmTrGroupType is mandatory Current defaults for omitted columns in createAndGo: bitrate=15Mbit But don't rely on these defaults.
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.1.1.7RowStatusread-createcurrent
dcmTrTransportStreamTable
OBJECT-TYPE
Table with assignments of output transport streams to transrating groups.
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.2not-accessiblecurrent
dcmTrTransportStreamEntry
OBJECT-TYPE
Conceptual row of dcmTrTransportStreamTable
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.2.1not-accessiblecurrent
dcmTrTsOutputTsIndex
OBJECT-TYPE
Identification of the output transport stream. See also dcmTsIndex.
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.2.1.1Integer32 (100000000..999999999)not-accessiblecurrent
dcmTrTsGroupId
OBJECT-TYPE
Identification of the transrater group.
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.2.1.2Integer32 (2..501)read-createcurrent
dcmTrTsRowStatus
OBJECT-TYPE
Rowstatus column to create a transport stream - group configuration. Can only support one-shot creation and deletion (createAndGo(4)/destroy(6)) SNMP UNDO of a destroy might fail. dcmTrTsGroupId is mandatory
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.2.1.3RowStatusread-createcurrent
dcmTrServiceConfigTable
OBJECT-TYPE
Table with assignments of output services to transrating groups.
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.3not-accessiblecurrent
dcmTrServiceConfigEntry
OBJECT-TYPE
Conceptual row of dcmTrServiceConfigTable
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.3.1not-accessiblecurrent
dcmTrSrvOutputTsIndex
OBJECT-TYPE
Identification of the output transport stream. See also dcmTsIndex.
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.3.1.1Integer32 (100000000..999999999)not-accessiblecurrent
dcmTrSrvOutputServiceID
OBJECT-TYPE
Identification of the output service.
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.3.1.2Integer32 (0..65535)not-accessiblecurrent
dcmTrSrvGroupId
OBJECT-TYPE
Identification of the transrater group.
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.3.1.3Integer32 (2..501)read-createcurrent
dcmTrSrvTypeForService
OBJECT-TYPE
Service is passed, statmuxed or rate limited.
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.3.1.4INTEGER {passThrough(1), statMuxed(2), rateLimited(3)}read-createcurrent
dcmTrSrvLowerLimitServiceBitRate
OBJECT-TYPE
Lower bound on the transrating for that service. Lower and upper bound are always equal for rate limited services.
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.3.1.5Integer32read-createcurrent
dcmTrSrvUpperLimitServiceBitRate
OBJECT-TYPE
Upper bound on the transrating for that service. Lower and upper bound are always equal for rate limited services.
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.3.1.6Integer32read-createcurrent
dcmTrSrvPriority
OBJECT-TYPE
Priority of the service for bitrate assignment -- the higher this number the higher the priority for bitrate assignment.
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.3.1.7Integer32 (0..10)read-createcurrent
dcmTrSrvRowStatus
OBJECT-TYPE
Rowstatus column to create a service configuration. Can only support one-shot creation and deletion (createAndGo(4)/destroy(6)) SNMP UNDO of a destroy might fail dcmTrSrvGroupId is mandatory. Current defaults for omitted columns in createAndGo: passThrough, lower=.1Mbit, upper=15Mbit, priority=5 But don't rely on these defaults.
1.3.6.1.4.1.1482.20.3.2.2.3.1.2.3.1.8RowStatusread-createcurrent
dcmDpiSettings
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.1.3
dcmDpiChannelTable
OBJECT-TYPE
Table with settings related to Digital Program Insertion (DPI), also known as splicing.
1.3.6.1.4.1.1482.20.3.2.2.3.1.3.1not-accessiblecurrent
dcmDpiChannelEntry
OBJECT-TYPE
Conceptual row of dcmDpiChannelTable
1.3.6.1.4.1.1482.20.3.2.2.3.1.3.1.1not-accessiblecurrent
dcmDpiPrimaryChannelName
OBJECT-TYPE
Name of the DPI primary channel (maximum 31 characters). This name must be unique over the DCM
1.3.6.1.4.1.1482.20.3.2.2.3.1.3.1.1.1DisplayStringread-createcurrent
dcmDpiPrimaryChannelMode
OBJECT-TYPE
How DPI is triggered: - off, DPI is never triggered. - scte30, DPI is triggered by an ad server. - scte35, DPI is triggered by an SCTE35 digital cue tone. - manual, DPI is triggered by an IDL call (e.g. using HTML GUI or dcmDpiManualTrigger). - scte35custom: a scte35 variant not fully configurable using SNMP. - manualcustom: a manual variant not fully configurable using SNMP.
1.3.6.1.4.1.1482.20.3.2.2.3.1.3.1.1.2INTEGER {off(1), scte30(2), scte35(3), manual(4), scte35custom(5), manualcustom(6)}read-createcurrent
dcmDpiInputTsIndex
OBJECT-TYPE
Insertion channel: Reference to the input TS. 999999999 means undefined
1.3.6.1.4.1.1482.20.3.2.2.3.1.3.1.1.3Integer32 (100000000..999999999)read-createcurrent
dcmDpiInputServiceId
OBJECT-TYPE
Insertion channel: Reference to the input service ID. -1 means undefined
1.3.6.1.4.1.1482.20.3.2.2.3.1.3.1.1.4Integer32 (-1..65535)read-createcurrent
dcmDpiManualTrigger
OBJECT-TYPE
In case of manual splicing mode: trigger to start/stop splice. This object may be set to either startSplice or stopSplice. When performing an SNMP get on this object, the result will be the value 'undefined'.
1.3.6.1.4.1.1482.20.3.2.2.3.1.3.1.1.5INTEGER {undefined(1), startSplice(2), stopSplice(3)}read-createcurrent
dcmDpiChannelStatus
OBJECT-TYPE
Show the current status of the DPI Channel: Primary Channel or Insertion Channel (ad)
1.3.6.1.4.1.1482.20.3.2.2.3.1.3.1.1.6INTEGER {primary(1), ad(2)}read-onlycurrent
dcmDpiRowStatus
OBJECT-TYPE
Rowstatus column to set up a splice. SNMP UNDO of a destroy might fail Can only support one-shot creation and deletion (createAndGo(4)/destroy(6)) Current defaults for omitted columns in createAndGo: off, undefined insertion channel, (no manual trigger) But don't rely on these defaults.
1.3.6.1.4.1.1482.20.3.2.2.3.1.3.1.1.7RowStatusread-createcurrent
dcmGbeSettings
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.1.5
dcmOutputTsFecTable
OBJECT-TYPE
Table with the FEC Encoding settings specific for an Output TS. See 'Forward Error Correction' chapter in 'DCM Configuration Guide'
1.3.6.1.4.1.1482.20.3.2.2.3.1.5.1not-accessiblecurrent
dcmOutputTsFecEntry
OBJECT-TYPE
Conceptual row of the dcmOutputTsFecTable. A row exists for every Output Ts on a GbE board, even when there is no FEC board present. When no FEC board is present, the settings have no effect.
1.3.6.1.4.1.1482.20.3.2.2.3.1.5.1.1not-accessiblecurrent
dcmOutputTsFecMode
OBJECT-TYPE
Output mode for FEC encoder
1.3.6.1.4.1.1482.20.3.2.2.3.1.5.1.1.1INTEGER {disabled(1), fec1D(2), fec2D(3)}read-writecurrent
dcmOutputTsFecSendingArrangement
OBJECT-TYPE
FEC linearity for encoder.
1.3.6.1.4.1.1482.20.3.2.2.3.1.5.1.1.2INTEGER {pro-mpeg-cop3-annex-B(1), pro-mpeg-cop3-annex-A(2)}read-writecurrent
dcmOutputTsFecRowL
OBJECT-TYPE
FEC Row Length (L value). L x D must be <= 256. L must be >=4 for Fec2D D must be >L for Annex_A
1.3.6.1.4.1.1482.20.3.2.2.3.1.5.1.1.3Integer32 (1..20)read-writecurrent
dcmOutputTsFecColD
OBJECT-TYPE
FEC Column Depth (D value). L x D must be <= 256 D must be >L for Annex_A
1.3.6.1.4.1.1482.20.3.2.2.3.1.5.1.1.4Integer32 (4..20)read-writecurrent
dcmOutputTsFecColIp
OBJECT-TYPE
Ip Address of the Column Fec Stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.5.1.1.5IpAddressread-writecurrent
dcmOutputTsFecColUdp
OBJECT-TYPE
Udp port of the Column Fec Stream
1.3.6.1.4.1.1482.20.3.2.2.3.1.5.1.1.6Integer32 (0..65535)read-writecurrent
dcmOutputTsFecRowIp
OBJECT-TYPE
Ip Address of the Row Fec Stream Only applicable for 2D FEC
1.3.6.1.4.1.1482.20.3.2.2.3.1.5.1.1.7IpAddressread-writecurrent
dcmOutputTsFecRowUdp
OBJECT-TYPE
Udp port of the Row Fec Stream Only applicable for 2D FEC
1.3.6.1.4.1.1482.20.3.2.2.3.1.5.1.1.8Integer32 (0..65535)read-writecurrent
dcmGbePortModeTable
OBJECT-TYPE
Table of GbE Port mode per board pair: only one of the ports of the pair is used (manual or automatic) individual: ports are still accessed per pair, but they are split up in an input and output port
1.3.6.1.4.1.1482.20.3.2.2.3.1.5.2not-accessiblecurrent
dcmGbePortModeEntry
OBJECT-TYPE
Conceptual row of the dcmGbePortModeTable A row exists for every GbE board
1.3.6.1.4.1.1482.20.3.2.2.3.1.5.2.1not-accessiblecurrent
dcmGbePortModeBoardNumber
OBJECT-TYPE
Identification of the (GbE) board where the port mode is configured.
1.3.6.1.4.1.1482.20.3.2.2.3.1.5.2.1.1Integer32 (1..4)not-accessiblecurrent
dcmGbePortModeMode
OBJECT-TYPE
Mode of the ports (see dcmGbePortModeTable)
1.3.6.1.4.1.1482.20.3.2.2.3.1.5.2.1.2INTEGER {pair(1), individual(2)}read-onlycurrent
dcmAsiSettings
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.1.6
dcmConfigAsiInputBandwidthLimitTable
OBJECT-TYPE
Table with the bandwidth limitation configuration. This in an ASI input TS feature. See the DCM manual for more info on the applications and limitations of this feature.
1.3.6.1.4.1.1482.20.3.2.2.3.1.6.1not-accessiblecurrent
dcmConfigAsiInputBandwidthLimitEntry
OBJECT-TYPE
Conceptual row of the dcmConfigAsiInputBandwidthLimitTable.
1.3.6.1.4.1.1482.20.3.2.2.3.1.6.1.1not-accessiblecurrent
dcmConfigAsiInputBandwidthLimitBoard
OBJECT-TYPE
The board number.
1.3.6.1.4.1.1482.20.3.2.2.3.1.6.1.1.1Integer32 (1..4)not-accessiblecurrent
dcmConfigAsiInputBandwidthLimitPort
OBJECT-TYPE
The port number.
1.3.6.1.4.1.1482.20.3.2.2.3.1.6.1.1.2Integer32 (1..10)not-accessiblecurrent
dcmConfigAsiInputBandwidthLimitStatus
OBJECT-TYPE
If true the bitrate will be limited to dcmConfigAsiInputBandwidthLimitBitrate
1.3.6.1.4.1.1482.20.3.2.2.3.1.6.1.1.3INTEGER {disabled(1), enabled(2)}read-createcurrent
dcmConfigAsiInputBandwidthLimitBitrate
OBJECT-TYPE
The bitrate limit.
1.3.6.1.4.1.1482.20.3.2.2.3.1.6.1.1.4Integer32 (0..213000)read-createcurrent
dcmDeviceSettings
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.1.7
dcmDeviceBackupSettings
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.1.7.1
dcmDeviceBackupActivateDevice
OBJECT-TYPE
Instructs this device to gracefully become the active device. If the device is a main device then this will result in a manual restore operation. If the device is a backup device then this will result in a manual backup operation. Before DCM v10.10, this field was write-only, only accepting eActive (before eActivate) to activate the device and always returning eUnknown when being read. From DCM v10.10 on, this field still only accepts eActive to activate the device, but now returns the state (eActive or eNotActive) when being read.
1.3.6.1.4.1.1482.20.3.2.2.3.1.7.1.1INTEGER {eUnknown(1), eActive(2), eNotActive(3)}read-writecurrent
dcmIpgwSettings
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.1.8
dcmIpgwSdiIn
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1
dcmIpgwSdiInConfigTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.1not-accessiblecurrent
dcmIpgwSdiInConfigEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.1.1not-accessiblecurrent
dcmIpgwSdiInConfigBoard
OBJECT-TYPE
Identification of the board where the SDI input port is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.1.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwSdiInConfigPort
OBJECT-TYPE
Identification of the SDI input port. SDI port numbers range from 2..7
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.1.1.2Integer32 (2..7)not-accessiblecurrent
dcmIpgwSdiInConfigRef
OBJECT-TYPE
Same as the Port. A SDI port can only have 1 stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.1.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwSdiInConfigMaxAllowedVideoFormat
OBJECT-TYPE
Maximum allowed bandwidth
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.1.1.4INTEGER {eSD(1), eHD(2), e3G(3)}read-writecurrent
dcmIpgwSdiInConfigUserName
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.1.1.5OCTET STRINGread-writecurrent
dcmIpgwSdiInFormatTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.2not-accessiblecurrent
dcmIpgwSdiInFormatEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.2.1not-accessiblecurrent
dcmIpgwSdiInFormatBoard
OBJECT-TYPE
Identification of the board where the SDI input port is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.2.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwSdiInFormatPort
OBJECT-TYPE
Identification of the SDI input port. SDI port numbers range from 2..7
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.2.1.2Integer32 (2..7)not-accessiblecurrent
dcmIpgwSdiInFormatRef
OBJECT-TYPE
Same as the Port. A SDI port can only have 1 stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.2.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwSdiInFormatFramerate
OBJECT-TYPE
The received framerate
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.2.1.4INTEGER {e24fps(1), e25fps(2), e30fps(3), e50fps(4), e60fps(5), e2997fps(6), e5994fps(7)}read-onlycurrent
dcmIpgwSdiInFormatVideoformat
OBJECT-TYPE
The received video format.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.2.1.5INTEGER {eSD(1), eHD(2), e3G(3)}read-onlycurrent
dcmIpgwSdiInFormatAspectRatio
OBJECT-TYPE
The received Aspect Ratio.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.2.1.6INTEGER {e4n3(1), e16n9(2), e14n9(3), eNotAvailable(4)}read-onlycurrent
dcmIpgwSdiInFormatNbrOfLinesPerFrame
OBJECT-TYPE
Received number of lines per frame.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.2.1.7Integer32read-onlycurrent
dcmIpgwSdiInFormatFrameBuildUp
OBJECT-TYPE
Received Frame buildup.Progressive or Interlaced.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.2.1.8INTEGER {eProgressive(1), eInterlaced(2)}read-onlycurrent
dcmIpgwSdiInStatisticsCrcTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.3not-accessiblecurrent
dcmIpgwSdiInStatisticsCrcEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.3.1not-accessiblecurrent
dcmIpgwSdiInStatisticsBoard
OBJECT-TYPE
Identification of the board where the SDI input port is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.3.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwSdiInStatisticsPort
OBJECT-TYPE
Identification of the SDI input port. SDI port numbers range from 2..7
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.3.1.2Integer32 (2..7)not-accessiblecurrent
dcmIpgwSdiInStatisticsRef
OBJECT-TYPE
Same as the Port. A SDI port can only have 1 stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.3.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwSdiInStatisticsReset
OBJECT-TYPE
Write-only value that resets all the CRC-counters.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.3.1.4INTEGER {eReset(1)}read-writecurrent
dcmIpgwSdiInStatisticsCrcErrors1Min
OBJECT-TYPE
1 min CRC counter.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.3.1.5Unsigned32read-onlycurrent
dcmIpgwSdiInStatisticsCrcErrors1Hour
OBJECT-TYPE
1 hour CRC counter.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.3.1.6Unsigned32read-onlycurrent
dcmIpgwSdiInStatisticsCrcErrors1Day
OBJECT-TYPE
1 day CRC counter.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.1.3.1.7Unsigned32read-onlycurrent
dcmIpgwSdiOut
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.2
dcmIpgwSdiOutTSTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.2.1not-accessiblecurrent
dcmIpgwSdiOutTSEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.2.1.1not-accessiblecurrent
dcmIpgwSdiOutTSBoard
OBJECT-TYPE
Identification of the board where the SDI output port is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.2.1.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwSdiOutTSPort
OBJECT-TYPE
Identification of the SDI output port. SDI port numbers range from 2..7 Monitor port is named 8
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.2.1.1.2Integer32 (2..8)not-accessiblecurrent
dcmIpgwSdiOutTSRef
OBJECT-TYPE
Same as the Port as a SDI port can only have 1 stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.2.1.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwSdiOutTSSrcBoard
OBJECT-TYPE
Identification of the board from where the stream is routed from. Must be the same board number as in dcmIpgwSdiOutTSSrcBoard. If Board, Port, Ref is 0,0,0 it indicates that there is no Stream routed to the SDI Output port. To delete a Route, write 0,0,0 to Board, Port, Ref.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.2.1.1.4Integer32 (1..4)read-writecurrent
dcmIpgwSdiOutTSSrcPort
OBJECT-TYPE
Identification of the port from where the stream is routed from. For GbE board the port number is 0. For SDI ports, the port number is in range 2..7. It is possible to route SDI output ports to the Monito port 8. Port If Board, Port, Ref is 0,0,0 it indicates that there is no Stream routed to the SDI Output port. To delete a Route, write 0,0,0 to Board, Port, Ref.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.2.1.1.5Integer32 (0 | 2..7 | 101..106)read-writecurrent
dcmIpgwSdiOutTSSrcRef
OBJECT-TYPE
If routed from the Gbe port, the Ref must also be given. The Ref is listed in dcmIpgwRtpInTSRef. Not used is routed from a SDI port. If Board, Port, Ref is 0,0,0 it indicates that there is no Stream routed to the SDI Output port. To delete a Route, write 0,0,0 to Board, Port, Ref.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.2.1.1.6Integer32 (0..65535)read-writecurrent
dcmIpgwSdiOutTSActive
OBJECT-TYPE
Activate or Pause the output of the SDI Port
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.2.1.1.7INTEGER {eActive(1), eNotActive(2)}read-writecurrent
dcmIpgwRtpIn
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3
dcmIpgwRtpInTSTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.1not-accessiblecurrent
dcmIpgwRtpInTSEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.1.1not-accessiblecurrent
dcmIpgwRtpInTsBoard
OBJECT-TYPE
Identification of the board where the RTP input stream is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.1.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwRtpInTSPort
OBJECT-TYPE
Gbe A. Allways 0.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.1.1.2Integer32 (0)not-accessiblecurrent
dcmIpgwRtpInTSRef
OBJECT-TYPE
The Rtp Input reference.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.1.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwRtpInTSMaxAllowedVideoFormat
OBJECT-TYPE
Maximum allowed bandwidth
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.1.1.4INTEGER {eSD(1), eHD(2), e3G(3)}read-createcurrent
dcmIpgwRtpInTSUsername
OBJECT-TYPE
RTP input Stream Name.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.1.1.5OCTET STRINGread-createcurrent
dcmIpgwRtpInTSIpAddress
OBJECT-TYPE
Destination (multicast) IP Address of the received RTP-Stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.1.1.6IpAddressread-createcurrent
dcmIpgwRtpInTSUdpPort
OBJECT-TYPE
Destination UDP Port of the received RTP-Stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.1.1.7Integer32 (0..65535)read-createcurrent
dcmIpgwRtpInTSDejitter
OBJECT-TYPE
Dejitter in ms, range between 1 and 200 (default 25) For uncompressed, the minimum value is 7.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.1.1.8Integer32 (1..200)read-createcurrent
dcmIpgwRtpInTSVideoOffset
OBJECT-TYPE
Video Phase Offset in ns.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.1.1.9Integer32 (-10000..10000)read-createcurrent
dcmIpgwRtpInTSRowStatus
OBJECT-TYPE
Rowstatus column that allows to create a RTP input stream. The dcmIpgwRtpInTsRef value will be given a new value by the IPGW. Can only support one-shot creation and deletion (createAndGo(4)/destroy(6)) SNMP UNDO of a destroy might fail.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.1.1.10RowStatusread-createcurrent
dcmIpgwRtpInFormatTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.2not-accessiblecurrent
dcmIpgwRtpInFormatEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.2.1not-accessiblecurrent
dcmIpgwRtpInFormatBoard
OBJECT-TYPE
Identification of the board where the RTP input stream is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.2.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwRtpInFormatPort
OBJECT-TYPE
Gbe A. Allways 0.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.2.1.2Integer32 (2..7)not-accessiblecurrent
dcmIpgwRtpInFormatRef
OBJECT-TYPE
The Rtp Input reference in dcmIpgwRtpInTSRef.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.2.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwRtpInFormatFramerate
OBJECT-TYPE
The received framerate
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.2.1.4INTEGER {e24fps(1), e25fps(2), e30fps(3), e50fps(4), e60fps(5), e2997fps(6), e5994fps(7)}read-onlycurrent
dcmIpgwRtpInFormatVideoformat
OBJECT-TYPE
The received video format.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.2.1.5INTEGER {eSD(1), eHD(2), e3G(3)}read-onlycurrent
dcmIpgwRtpInFormatAspectRatio
OBJECT-TYPE
The received Aspect Ratio.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.2.1.6INTEGER {e4n3(1), e16n9(2), e14n9(3), eNotAvailable(4)}read-onlycurrent
dcmIpgwRtpInFormatNbrOfLinesPerFrame
OBJECT-TYPE
Received number of lines per frame.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.2.1.7Integer32read-onlycurrent
dcmIpgwRtpInFormatFrameBuildUp
OBJECT-TYPE
Received Frame buildup.Progressive or Interlaced.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.2.1.8INTEGER {eProgressive(1), eInterlaced(2)}read-onlycurrent
dcmIpgwRtpInJp2kEnableTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.3not-accessiblecurrent
dcmIpgwRtpInJp2kEnableEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.3.1not-accessiblecurrent
dcmIpgwRtpInJp2kEnableBoard
OBJECT-TYPE
Identification of the board where the RTP input stream is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.3.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwRtpInJp2kEnablePort
OBJECT-TYPE
Gbe A. Allways 0.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.3.1.2Integer32 (0)not-accessiblecurrent
dcmIpgwRtpInJp2kEnableRef
OBJECT-TYPE
The Rtp Input reference in dcmIpgwRtpInTSRef.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.3.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwRtpInJp2kEnableState
OBJECT-TYPE
Enable or disable use of Jpeg2k compression for the Rtp-stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.3.1.4INTEGER {eActive(1), eNotActive(2)}read-writecurrent
dcmIpgwRtpInStatisticsTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.4not-accessiblecurrent
dcmIpgwRtpInStatisticsEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.4.1not-accessiblecurrent
dcmIpgwRtpInStatisticsBoard
OBJECT-TYPE
Identification of the board where the RTP input stream is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.4.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwRtpInStatisticsPort
OBJECT-TYPE
Gbe A. Allways 0.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.4.1.2Integer32 (0)not-accessiblecurrent
dcmIpgwRtpInStatisticsRef
OBJECT-TYPE
The Rtp Input reference in dcmIpgwRtpInTSRef.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.4.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwRtpInStatisticsReset
OBJECT-TYPE
Write-only value that resets all the counters.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.4.1.4INTEGER {eReset(1)}read-writecurrent
dcmIpgwRtpInStatisticsValidPackets
OBJECT-TYPE
Valid Packets counter.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.4.1.5Counter64read-onlycurrent
dcmIpgwRtpInStatisticsMissingPackets
OBJECT-TYPE
Missing Packets counter.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.4.1.6Counter64read-onlycurrent
dcmIpgwRtpInStatisticsFixedPackets
OBJECT-TYPE
Fixed Packets
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.4.1.7Counter64read-onlycurrent
dcmIpgwRtpInStatisticsDuplicatePackets
OBJECT-TYPE
Duplicate Packets counter.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.4.1.8Counter64read-onlycurrent
dcmIpgwRtpInStatisticsReorderedPackets
OBJECT-TYPE
Reordered Packets counter.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.4.1.9Counter64read-onlycurrent
dcmIpgwRtpInStatisticsOutOfRangePackets
OBJECT-TYPE
Out of Range Packets counter.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.4.1.10Counter64read-onlycurrent
dcmIpgwRtpInStatitsticsCrcTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.5not-accessiblecurrent
dcmIpgwRtpInStatitsticsCrcEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.5.1not-accessiblecurrent
dcmIpgwRtpInStatitsticsCrcBoard
OBJECT-TYPE
Identification of the board where the RTP input stream is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.5.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwRtpInStatitsticsCrcPort
OBJECT-TYPE
Gbe A. Allways 0.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.5.1.2Integer32 (0)not-accessiblecurrent
dcmIpgwRtpInStatitsticsCrcRef
OBJECT-TYPE
The Rtp Input reference in dcmIpgwRtpInTSRef.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.5.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwRtpInStatisticsCrcReset
OBJECT-TYPE
Write-only value that resets all the CRC-counters.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.5.1.4INTEGER {eReset(1)}read-writecurrent
dcmIpgwRtpInStatisticsCrcErrors1min
OBJECT-TYPE
1 min CRC counter.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.5.1.5Unsigned32read-onlycurrent
dcmIpgwRtpInStatisticsCrcErrors1Hour
OBJECT-TYPE
1 hour CRC counter.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.5.1.6Unsigned32read-onlycurrent
dcmIpgwRtpInStatisticsCrcErrors1Day
OBJECT-TYPE
1 day CRC counter.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.5.1.7Unsigned32read-onlycurrent
dcmIpgwRtpInFecConfigTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.6not-accessiblecurrent
dcmIpgwRtpInFecConfigEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.6.1not-accessiblecurrent
dcmIpgwRtpInFecConfigBoard
OBJECT-TYPE
Identification of the board where the RTP input stream is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.6.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwRtpInFecConfigPort
OBJECT-TYPE
Gbe A. Allway 0.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.6.1.2Integer32 (0)not-accessiblecurrent
dcmIpgwRtpInFecConfigRef
OBJECT-TYPE
The Rtp Input reference in dcmIpgwRtpInTSRef.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.6.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwRtpInFecConfigMode
OBJECT-TYPE
FEC Mode.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.6.1.4INTEGER {eDisable(1), e1DMode(2), e2DMode(3)}read-writecurrent
dcmIpgwRtpInFecConfigColumnIpAddress
OBJECT-TYPE
FEC Column Destination IP Address.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.6.1.5IpAddressread-writecurrent
dcmIpgwRtpInFecConfigColumnUdpPort
OBJECT-TYPE
FEC Column Destination UDP Port.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.6.1.6Integer32 (0..65535)read-writecurrent
dcmIpgwRtpInFecConfigRowIpAddress
OBJECT-TYPE
FEC Row Destination IP Address.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.6.1.7IpAddressread-writecurrent
dcmIpgwRtpInFecConfigRowUdpPort
OBJECT-TYPE
FEC Row Destination UDP Port.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.6.1.8Integer32 (0..65535)read-writecurrent
dcmIpgwRtpInFecStatusTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.7not-accessiblecurrent
dcmIpgwRtpInFecStatusEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.7.1not-accessiblecurrent
dcmIpgwRtpInFecStatusBoard
OBJECT-TYPE
Identification of the board where the RTP input stream is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.7.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwRtpInFecStatusPort
OBJECT-TYPE
Gbe A. Allways 0.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.7.1.2Integer32 (0)not-accessiblecurrent
dcmIpgwRtpInFecStatusRef
OBJECT-TYPE
The Rtp Input reference in dcmIpgwRtpInTSRef.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.7.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwRtpInFecStatusColumnPresent
OBJECT-TYPE
Is FEC Coloumn Present.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.7.1.4INTEGER {ePresent(1), eNotPresent(2)}read-onlycurrent
dcmIpgwRtpInFecStatusRowPresent
OBJECT-TYPE
Is FEC Row Present.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.7.1.5INTEGER {ePresent(1), eNotPresent(2)}read-onlycurrent
dcmIpgwRtpInFecStatusFecColumnDepth
OBJECT-TYPE
FEC Column Depth.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.7.1.6Integer32read-onlycurrent
dcmIpgwRtpInFecStatusFecRowLength
OBJECT-TYPE
FEC Row Depth.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.7.1.7Integer32read-onlycurrent
dcmIpgwRtpInFecStatusColumnOverhead
OBJECT-TYPE
Column FEC Stream Overhead in percentage fixed point 2 digit (x100)
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.7.1.8Integer32 (0..10000)read-onlycurrent
dcmIpgwRtpInFecStatusRowOverhead
OBJECT-TYPE
Row FEC Stream Overhead in percentage fixed point 2 digit (x100)
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.7.1.9Integer32 (0..10000)read-onlycurrent
dcmIpgwRtpInFecStatusTotalOverhead
OBJECT-TYPE
Total FEC Stream Overhead in percentage fixed point 2 digit (x100)
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.7.1.10Integer32 (0..10000)read-onlycurrent
dcmIpgwRtpInFecStatusLatency
OBJECT-TYPE
FEC Stream Latency in ms fixed point 1 digit (x10).
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.7.1.11Integer32read-onlycurrent
dcmIpgwRtpInHitlessTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.8not-accessiblecurrent
dcmIpgwRtpInHitlessEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.8.1not-accessiblecurrent
dcmIpgwRtpInHitlessBoard
OBJECT-TYPE
Identification of the board where the RTP input stream is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.8.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwRtpInHitlessPort
OBJECT-TYPE
Gbe A. Allways 0.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.8.1.2Integer32 (0)not-accessiblecurrent
dcmIpgwRtpInHitlessRef
OBJECT-TYPE
The Rtp Input reference in dcmIpgwRtpInTSRef.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.8.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwRtpInHitlessMode
OBJECT-TYPE
Enable/Disable Hitless Switchover.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.8.1.4INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwRtpInHitlessWindowPackets
OBJECT-TYPE
Write only. RTP Packets window.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.8.1.5Integer32read-writecurrent
dcmIpgwRtpInHitlessDelay
OBJECT-TYPE
Hitless Buffer Delay in ms corresponding to RTP packet window.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.3.8.1.6Integer32read-onlycurrent
dcmIpgwRtpOut
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4
dcmIpgwRtpOutTSTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.1not-accessiblecurrent
dcmIpgwRtpOutTSEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.1.1not-accessiblecurrent
dcmIpgwRtpOutTSBoard
OBJECT-TYPE
Identification of the board where the RTP output stream is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.1.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwRtpOutTSPort
OBJECT-TYPE
Gbe A. Allways 0.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.1.1.2Integer32 (0)not-accessiblecurrent
dcmIpgwRtpOutTSRef
OBJECT-TYPE
The Rtp Output reference.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.1.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwRtpOutTSSrcBoard
OBJECT-TYPE
The Board from where the stream is routed from. Must be the same dcmIpgwRtpOutTSSrcBoard. If Board, Port, Ref is 0,0,0 it indicates that there is no Stream routed to the RTP Output port. To delete a Route, write 0,0,0 to Board, Port, Ref.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.1.1.4Integer32 (1..4)read-createcurrent
dcmIpgwRtpOutTSSrcPort
OBJECT-TYPE
The Port from where the stream is routed from. 2-7 if routing a SDI input stream. If Board, Port, Ref is 0,0,0 it indicates that there is no Stream routed to the RTP Output port. To delete a Route, write 0,0,0 to Board, Port, Ref.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.1.1.5Integer32 (0 | 2..7 | 101..106)read-createcurrent
dcmIpgwRtpOutTSSrcRef
OBJECT-TYPE
If routed from the Gbe port, the Ref must also be given. The Ref is listed in dcmIpgwRtpInTSRef. Not used if routed from a SDI port. If Board, Port, Ref is 0,0,0 it indicates that there is no Stream routed to the RTP Output port. To delete a Route, write 0,0,0 to Board, Port, Ref.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.1.1.6Integer32 (0..65535)read-createcurrent
dcmIpgwRtpOutTSActive
OBJECT-TYPE
Activate or Pause the output of the RTP Stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.1.1.7INTEGER {eActive(1), eNotActive(2)}read-createcurrent
dcmIpgwRtpOutTSGbePortType
OBJECT-TYPE
Pair: All configuration values like: TTL, TOS, VLAN, srcAddr (source socket) and destination socket are the same for the two GbE ports. Values configured for GbE0 are also used for GbE1. Individual: All configuration values as mentioned above are individual for for each GbE port.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.1.1.8INTEGER {ePairType(1), eIndividualType(2)}read-createcurrent
dcmIpgwRtpOutTSDestinationIpAddressA
OBJECT-TYPE
Destination IP Address. If dcmIpgwRtpOutTSGbePortType is set ePairType this address is used on both the A and B port.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.1.1.9IpAddressread-createcurrent
dcmIpgwRtpOutTSDestinationUdpPortA
OBJECT-TYPE
Destination UDP Port. If dcmIpgwRtpOutTSGbePortType is set ePairType this udpport is used on both the A and B port.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.1.1.10Integer32 (0..65535)read-createcurrent
dcmIpgwRtpOutTSDestinationIpAddressB
OBJECT-TYPE
Destination IP Address. If dcmIpgwRtpOutTSGbePortType is set ePairType this address is not used.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.1.1.11IpAddressread-createcurrent
dcmIpgwRtpOutTSDestinationUdpPortB
OBJECT-TYPE
Destination UDP Port. If dcmIpgwRtpOutTSGbePortType is set ePairType this udpport is not used.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.1.1.12Integer32 (0..65535)read-createcurrent
dcmIpgwRtpOutTSRowStatus
OBJECT-TYPE
Rowstatus column that allows to create a RTP output stream. The dcmIpgwRtpOutTsRef value will be given a new value by the IPGW. Can only support one-shot creation and deletion (createAndGo(4)/destroy(6)) SNMP UNDO of a destroy might fail.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.1.1.13RowStatusread-createcurrent
dcmIpgwRtpOutJp2kEnableTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.2not-accessiblecurrent
dcmIpgwRtpOutJp2kEnableEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.2.1not-accessiblecurrent
dcmIpgwRtpOutJp2kEnableBoard
OBJECT-TYPE
Identification of the board where the RTP output stream is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.2.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwRtpOutJp2kEnablePort
OBJECT-TYPE
Gbe A: Always 0.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.2.1.2Integer32 (0)not-accessiblecurrent
dcmIpgwRtpOutJp2kEnableRef
OBJECT-TYPE
The Rtp Output reference in dcmIpgwRtpOutTSRef.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.2.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwRtpOutJp2kEnableState
OBJECT-TYPE
Enable or disable use of Jpeg2k compression for the Rtp-stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.2.1.4INTEGER {eActive(1), eNotActive(2)}read-writecurrent
dcmIpgwRtpOutJp2k
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3
dcmIpgwRtpOutJp2kConfigTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.1not-accessiblecurrent
dcmIpgwRtpOutJp2kConfigEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.1.1not-accessiblecurrent
dcmIpgwRtpOutJp2kConfigBoard
OBJECT-TYPE
Identification of the board where the RTP output stream is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.1.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwRtpOutJp2kConfigPort
OBJECT-TYPE
Gbe A: Always 0.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.1.1.2Integer32 (0)not-accessiblecurrent
dcmIpgwRtpOutJp2kConfigRef
OBJECT-TYPE
The Rtp output stream reference in dcmIpgwRtpOutTSRef.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.1.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwRtpOutJp2kConfigVideoRate
OBJECT-TYPE
Actual encoded rate [bps].
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.1.1.4Integer32read-onlycurrent
dcmIpgwRtpOutJp2kConfigMaxStreamBitRate
OBJECT-TYPE
Maximum bit rate of an JP2K output stream incl. audio, MXF, and RTP overhead [bps]
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.1.1.5Integer32 (20000000..900000000)read-writecurrent
dcmIpgwRtpOutJp2kConfigChromaWeight
OBJECT-TYPE
Percentage of compressed bit rate used for chroma data.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.1.1.6Integer32 (5..30)read-writecurrent
dcmIpgwRtpOutJp2kConfigVitcEnable
OBJECT-TYPE
Enable VITC.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.1.1.7INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwRtpOutJp2kConfigViiEnable
OBJECT-TYPE
Enable VII.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.1.1.8INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwRtpOutJp2kConfigAfdEnable
OBJECT-TYPE
Enable AFD.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.1.1.9INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwRtpOutJp2kConfigTeletextBEnable
OBJECT-TYPE
Enable Teletext B.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.1.1.10INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwRtpOutJp2kConfigCCEnable
OBJECT-TYPE
Enable Close Caption.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.1.1.11INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwRtpOutJp2kConfigVPSEnable
OBJECT-TYPE
Enable Close Caption.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.1.1.12INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwRtpOutJp2kConfigTrans625F1Line
OBJECT-TYPE
The following lines is valid: 625 Field 1: 6-22 625 Field 2: 319-335 525 Field 1: 10-19 525 Field 2: 10-18
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.1.1.13OCTET STRINGread-writecurrent
dcmIpgwRtpOutJp2kConfigTrans625F2Line
OBJECT-TYPE
The following lines is valid: 625 Field 1: 6-22 625 Field 2: 319-335 525 Field 1: 10-19 525 Field 2: 10-18
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.1.1.14OCTET STRINGread-writecurrent
dcmIpgwRtpOutJp2kConfigTrans525F1Line
OBJECT-TYPE
The following lines is valid: 625 Field 1: 6-22 625 Field 2: 319-335 525 Field 1: 10-19 525 Field 2: 10-18
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.1.1.15OCTET STRINGread-writecurrent
dcmIpgwRtpOutJp2kConfigTrans525F2Line
OBJECT-TYPE
The following lines is valid: 625 Field 1: 6-22 625 Field 2: 319-335 525 Field 1: 10-19 525 Field 2: 10-18
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.1.1.16OCTET STRINGread-writecurrent
dcmIpgwRtpOutJp2kConfigEncapsulationType
OBJECT-TYPE
Ecapsulation type for Jpeg2k compression for the Rtp-stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.1.1.17INTEGER {eNative(1), eSMPTE_2022_1-2(2)}read-writecurrent
dcmIpgwRtpOutJp2kAudioTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.2not-accessiblecurrent
dcmIpgwRtpOutJp2kAudioEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.2.1not-accessiblecurrent
dcmIpgwRtpOutJp2kAudioBoard
OBJECT-TYPE
Identification of the board where the RTP output stream is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.2.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwRtpOutJp2kAudioPort
OBJECT-TYPE
Gbe A: Always 0.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.2.1.2Integer32 (0)not-accessiblecurrent
dcmIpgwRtpOutJp2kAudioRef
OBJECT-TYPE
The Rtp output stream reference in dcmIpgwRtpOutTSRef.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.2.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwRtpOutJp2kAudioPair1Enable
OBJECT-TYPE
Enable/Disable Audio pair on JP2K output.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.2.1.4INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwRtpOutJp2kAudioPair1Present
OBJECT-TYPE
Is Audio pair is present in the stream
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.2.1.5INTEGER {ePresent(1), eNotPresent(2)}read-onlycurrent
dcmIpgwRtpOutJp2kAudioPair2Enable
OBJECT-TYPE
Enable/Disable Audio pair on JP2K output.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.2.1.6INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwRtpOutJp2kAudioPair2Present
OBJECT-TYPE
Is Audio pair is present in the stream
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.2.1.7INTEGER {ePresent(1), eNotPresent(2)}read-onlycurrent
dcmIpgwRtpOutJp2kAudioPair3Enable
OBJECT-TYPE
Enable/Disable Audio pair on JP2K output.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.2.1.8INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwRtpOutJp2kAudioPair3Present
OBJECT-TYPE
Is Audio pair is present in the stream
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.2.1.9INTEGER {ePresent(1), eNotPresent(2)}read-onlycurrent
dcmIpgwRtpOutJp2kAudioPair4Enable
OBJECT-TYPE
Enable/Disable Audio pair on JP2K output.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.2.1.10INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwRtpOutJp2kAudioPair4Present
OBJECT-TYPE
Is Audio pair is present in the stream
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.2.1.11INTEGER {ePresent(1), eNotPresent(2)}read-onlycurrent
dcmIpgwRtpOutJp2kAudioPair5Enable
OBJECT-TYPE
Enable/Disable Audio pair on JP2K output.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.2.1.12INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwRtpOutJp2kAudioPair5Present
OBJECT-TYPE
Is Audio pair is present in the stream
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.2.1.13INTEGER {ePresent(1), eNotPresent(2)}read-onlycurrent
dcmIpgwRtpOutJp2kAudioPair6Enable
OBJECT-TYPE
Enable/Disable Audio pair on JP2K output.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.2.1.14INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwRtpOutJp2kAudioPair6Present
OBJECT-TYPE
Is Audio pair is present in the stream
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.2.1.15INTEGER {ePresent(1), eNotPresent(2)}read-onlycurrent
dcmIpgwRtpOutJp2kAudioPair7Enable
OBJECT-TYPE
Enable/Disable Audio pair on JP2K output.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.2.1.16INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwRtpOutJp2kAudioPair7Present
OBJECT-TYPE
Is Audio pair is present in the stream
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.2.1.17INTEGER {ePresent(1), eNotPresent(2)}read-onlycurrent
dcmIpgwRtpOutJp2kAudioPair8Enable
OBJECT-TYPE
Enable/Disable Audio pair on JP2K output.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.2.1.18INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwRtpOutJp2kAudioPair8Present
OBJECT-TYPE
Is Audio pair is present in the stream
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.3.2.1.19INTEGER {ePresent(1), eNotPresent(2)}read-onlycurrent
dcmIpgwRtpOutAdvancedTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.4not-accessiblecurrent
dcmIpgwRtpOutAdvancedEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.4.1not-accessiblecurrent
dcmIpgwRtpOutAdvancedBoard
OBJECT-TYPE
Identification of the board where the RTP output stream is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.4.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwRtpOutAdvancedPort
OBJECT-TYPE
Gbe A: 0 If dcmIpgwRtpOutTSGbePortType = eDualType. Gbe A+B:0-1: If dcmIpgwRtpOutTSGbePortType = eIndividualType.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.4.1.2Integer32 (0..1)not-accessiblecurrent
dcmIpgwRtpOutAdvancedRef
OBJECT-TYPE
The Rtp output stream reference in dcmIpgwRtpOutTSRef.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.4.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwRtpOutAdvancedVlanEnable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.4.1.4INTEGER {eVlanOn(1), eVlanOff(2)}read-writecurrent
dcmIpgwRtpOutAdvancedVlanId
OBJECT-TYPE
Range: 0-4094 12 bit, 0x0FFF not allowed, 0=no vlan id, only priority (ieee 802.1Q).
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.4.1.5Integer32 (0..4094)read-writecurrent
dcmIpgwRtpOutAdvancedVlanPriority
OBJECT-TYPE
Range: 0-7 0=default 1=low 7=high (ieee 802.1D)
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.4.1.6Integer32 (0..7)read-writecurrent
dcmIpgwRtpOutAdvancedTtl
OBJECT-TYPE
Time To Live value.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.4.1.7Integer32 (1..255)read-writecurrent
dcmIpgwRtpOutAdvancedTos
OBJECT-TYPE
TOS Value
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.4.1.8Integer32 (0..255)read-writecurrent
dcmIpgwRtpOutAdvancedUseSourceAddress
OBJECT-TYPE
If this value is set to eUseSourceIp the IP address and UDP Port is used as source
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.4.1.9INTEGER {eUsePortIp(1), eUseSourceIp(2)}read-writecurrent
dcmIpgwRtpOutAdvancedSourceIpAddress
OBJECT-TYPE
Source IP Address.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.4.1.10IpAddressread-writecurrent
dcmIpgwRtpOutAdvancedSourceUdpPort
OBJECT-TYPE
Source UDP Port.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.4.1.11Integer32 (0..65535)read-writecurrent
dcmIpgwRtpOutFecTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.5not-accessiblecurrent
dcmIpgwRtpOutFecEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.5.1not-accessiblecurrent
dcmIpgwRtpOutFecBoard
OBJECT-TYPE
Identification of the board where the RTP output stream is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.5.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwRtpOutFecPort
OBJECT-TYPE
Gbe A: Always 0.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.5.1.2Integer32 (0)not-accessiblecurrent
dcmIpgwRtpOutFecRef
OBJECT-TYPE
The Rtp output stream reference in dcmIpgwRtpOutTSRef.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.5.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwRtpOutFecMode
OBJECT-TYPE
FEC Mode.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.5.1.4INTEGER {eDisable(1), e1DMode(2), e2DMode(3)}read-writecurrent
dcmIpgwRtpOutFecSendingArrangement
OBJECT-TYPE
FEC Sending Arrangement. Only eProMpegCop3AnnexB is supported.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.5.1.5INTEGER {eProMpegCop3AnnexB(1), eProMpegCop3AnnexA(2)}read-writecurrent
dcmIpgwRtpOutFecRowLength
OBJECT-TYPE
FEC Row Length (L value). L x D must be <= 256. L must be >=4 for Fec2D
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.5.1.6Integer32 (1..20)read-writecurrent
dcmIpgwRtpOutFecColumnDepth
OBJECT-TYPE
FEC Column Depth (D value). L x D must be <= 256
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.5.1.7Integer32 (4..20)read-writecurrent
dcmIpgwRtpOutFecDestinationColIpAddressA
OBJECT-TYPE
FEC Column Desination IP Address. If dcmIpgwRtpOutTSGbePortType is set ePairType this address is used on both the A and B port.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.5.1.8IpAddressread-writecurrent
dcmIpgwRtpOutFecDestinationColUdpPortA
OBJECT-TYPE
FEC Column Desination UDP Port. If dcmIpgwRtpOutTSGbePortType is set ePairType this udpport is used on both the A and B port.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.5.1.9Integer32 (0..65535)read-writecurrent
dcmIpgwRtpOutFecDestinationRowIpAddressA
OBJECT-TYPE
FEC Row Desination IP Address. If dcmIpgwRtpOutTSGbePortType is set ePairType this address is used on both the A and B port.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.5.1.10IpAddressread-writecurrent
dcmIpgwRtpOutFecDestinationRowUdpPortA
OBJECT-TYPE
FEC Row Desination UDP Port. If dcmIpgwRtpOutTSGbePortType is set ePairType this udpport is used on both the A and B port.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.5.1.11Integer32 (0..65535)read-writecurrent
dcmIpgwRtpOutFecDestinationColIpAddressB
OBJECT-TYPE
FEC Column Desination IP Address. If dcmIpgwRtpOutTSGbePortType is set ePairType this address is not used.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.5.1.12IpAddressread-writecurrent
dcmIpgwRtpOutFecDestinationColUdpPortB
OBJECT-TYPE
FEC Column Desination UDP Port. If dcmIpgwRtpOutTSGbePortType is set ePairType this udpport is not used.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.5.1.13Integer32 (0..65535)read-writecurrent
dcmIpgwRtpOutFecDestinationRowIpAddressB
OBJECT-TYPE
FEC Row Desination IP Address. If dcmIpgwRtpOutTSGbePortType is set ePairType this address is not used.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.5.1.14IpAddressread-writecurrent
dcmIpgwRtpOutFecDestinationRowUdpPortB
OBJECT-TYPE
FEC Row Desination UDP Port. If dcmIpgwRtpOutTSGbePortType is set ePairType this udpport is not used.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.5.1.15Integer32 (0..65535)read-writecurrent
dcmIpgwRtpOutFecOverheadTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.6not-accessiblecurrent
dcmIpgwRtpOutFecOverheadEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.6.1not-accessiblecurrent
dcmIpgwRtpOutFecOverheadBoard
OBJECT-TYPE
Identification of the board where the RTP output stream is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.6.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwRtpOutFecOverheadPort
OBJECT-TYPE
Gbe A: Always 0.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.6.1.2Integer32 (0)not-accessiblecurrent
dcmIpgwRtpOutFecOverheadRef
OBJECT-TYPE
The Rtp output stream reference in dcmIpgwRtpOutTSRef.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.6.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwRtpOutFecOverheadColumn
OBJECT-TYPE
Column FEC Overhead in percentage fixed point 2 digit (x100), e.g. 10% -> 1000
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.6.1.4Integer32 (0..10000)read-onlycurrent
dcmIpgwRtpOutFecOverheadRow
OBJECT-TYPE
Row FEC Overhead in percentage fixed point 2 digit (x100), e.g. 10% -> 1000
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.6.1.5Integer32 (0..10000)read-onlycurrent
dcmIpgwRtpOutFecOverheadTotal
OBJECT-TYPE
Total FEC Overhead in percentage fixed point 2 digit (x100), e.g. 10% -> 1000
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.4.6.1.6Integer32 (0..10000)read-onlycurrent
dcmIpgwAsiIn
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5
dcmIpgwAsiInConfigTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.1not-accessiblecurrent
dcmIpgwAsiInConfigEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.1.1not-accessiblecurrent
dcmIpgwAsiInConfigBoard
OBJECT-TYPE
Identification of the board where the ASI input port is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.1.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwAsiInConfigPort
OBJECT-TYPE
Identification of the ASI input port. ASI port numbers range from 2..4
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.1.1.2Integer32 (2..7)not-accessiblecurrent
dcmIpgwAsiInConfigRef
OBJECT-TYPE
Same as the Port. An ASI port can only have 1 stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.1.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwAsiInConfigMaxAllowedVideoFormat
OBJECT-TYPE
Maximum allowed bandwidth
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.1.1.4INTEGER {eSD(1), eHD(2), e3G(3)}read-writecurrent
dcmIpgwAsiInConfigUserName
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.1.1.5OCTET STRINGread-writecurrent
dcmIpgwAsiInConfigVideoOffset
OBJECT-TYPE
Video Phase Offset in ns.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.1.1.6Integer32 (-10000..10000)read-writecurrent
dcmIpgwAsiInFormatTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.2not-accessiblecurrent
dcmIpgwAsiInFormatEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.2.1not-accessiblecurrent
dcmIpgwAsiInFormatBoard
OBJECT-TYPE
Identification of the board where the ASI input port is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.2.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwAsiInFormatPort
OBJECT-TYPE
Identification of the ASI input port. ASI port numbers range from 2..4
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.2.1.2Integer32 (2..7)not-accessiblecurrent
dcmIpgwAsiInFormatRef
OBJECT-TYPE
Same as the Port. An ASI port can only have 1 stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.2.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwAsiInFormatFramerate
OBJECT-TYPE
The received framerate
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.2.1.4INTEGER {e24fps(1), e25fps(2), e30fps(3), e50fps(4), e60fps(5), e2997fps(6), e5994fps(7)}read-onlycurrent
dcmIpgwAsiInFormatVideoformat
OBJECT-TYPE
The received video format.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.2.1.5INTEGER {eSD(1), eHD(2), e3G(3)}read-onlycurrent
dcmIpgwAsiInFormatAspectRatio
OBJECT-TYPE
The received Aspect Ratio.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.2.1.6INTEGER {e4n3(1), e16n9(2), e14n9(3), eNotAvailable(4)}read-onlycurrent
dcmIpgwAsiInFormatNbrOfLinesPerFrame
OBJECT-TYPE
Received number of lines per frame.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.2.1.7Integer32read-onlycurrent
dcmIpgwAsiInFormatFrameBuildUp
OBJECT-TYPE
Received Frame buildup.Progressive or Interlaced.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.2.1.8INTEGER {eProgressive(1), eInterlaced(2)}read-onlycurrent
dcmIpgwAsiInStatisticsCrcTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.3not-accessiblecurrent
dcmIpgwAsiInStatisticsCrcEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.3.1not-accessiblecurrent
dcmIpgwAsiInStatisticsBoard
OBJECT-TYPE
Identification of the board where the SDI input port is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.3.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwAsiInStatisticsPort
OBJECT-TYPE
Identification of the ASI input port. ASI port numbers range from 2..4
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.3.1.2Integer32 (2..7)not-accessiblecurrent
dcmIpgwAsiInStatisticsRef
OBJECT-TYPE
Same as the Port. An ASI port can only have 1 stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.3.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwAsiInStatisticsReset
OBJECT-TYPE
Write-only value that resets all the CRC-counters.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.3.1.4INTEGER {eReset(1)}read-writecurrent
dcmIpgwAsiInStatisticsCrcErrors1Min
OBJECT-TYPE
1 min CRC counter.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.3.1.5Unsigned32read-onlycurrent
dcmIpgwAsiInStatisticsCrcErrors1Hour
OBJECT-TYPE
1 hour CRC counter.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.3.1.6Unsigned32read-onlycurrent
dcmIpgwAsiInStatisticsCrcErrors1Day
OBJECT-TYPE
1 day CRC counter.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.5.3.1.7Unsigned32read-onlycurrent
dcmIpgwAsiOut
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6
dcmIpgwAsiOutTSTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.1not-accessiblecurrent
dcmIpgwAsiOutTSEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.1.1not-accessiblecurrent
dcmIpgwAsiOutTSBoard
OBJECT-TYPE
Identification of the board where the ASI output port is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.1.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwAsiOutTSPort
OBJECT-TYPE
Identification of the ASI output port. SDI output ports numbers range from 5..7 Monitor port is named 8
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.1.1.2Integer32 (2..8)not-accessiblecurrent
dcmIpgwAsiOutTSRef
OBJECT-TYPE
Same as the Port. An ASI port can only have 1 stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.1.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwAsiOutTSActive
OBJECT-TYPE
Activate or Pause the output of the ASI Port
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.1.1.4INTEGER {eActive(1), eNotActive(2)}read-writecurrent
dcmIpgwASIOutJp2k
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2
dcmIpgwASIOutJp2kConfigTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.1not-accessiblecurrent
dcmIpgwASIOutJp2kConfigEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.1.1not-accessiblecurrent
dcmIpgwASIOutJp2kConfigBoard
OBJECT-TYPE
Identification of the board where the ASI output port is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.1.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwASIOutJp2kConfigPort
OBJECT-TYPE
Identification of the ASI output port. SDI output ports numbers range from 5..7 Monitor port is named 8
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.1.1.2Integer32 (5..8)not-accessiblecurrent
dcmIpgwASIOutJp2kConfigRef
OBJECT-TYPE
Same as the Port. An ASI port can only have 1 stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.1.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwASIOutJp2kConfigVideoRate
OBJECT-TYPE
Actual encoded rate [bps].
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.1.1.4Integer32read-onlycurrent
dcmIpgwASIOutJp2kConfigMaxStreamBitRate
OBJECT-TYPE
Maximum bit rate of an JP2K output stream incl. audio, MXF, and RTP overhead [bps]
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.1.1.5Integer32 (20..900)read-writecurrent
dcmIpgwASIOutJp2kConfigChromaWeight
OBJECT-TYPE
Percentage of compressed bit rate used for chroma data.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.1.1.6Integer32 (5..30)read-writecurrent
dcmIpgwASIOutJp2kConfigVitcEnable
OBJECT-TYPE
Enable VITC.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.1.1.7INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwASIOutJp2kConfigViiEnable
OBJECT-TYPE
Enable VII.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.1.1.8INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwASIOutJp2kConfigAfdEnable
OBJECT-TYPE
Enable AFD.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.1.1.9INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwASIOutJp2kConfigTeletextBEnable
OBJECT-TYPE
Enable Teletext B.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.1.1.10INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwASIOutJp2kConfigCCEnable
OBJECT-TYPE
Enable Close Caption.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.1.1.11INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwASIOutJp2kConfigVPSEnable
OBJECT-TYPE
Enable Close Caption.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.1.1.12INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwASIOutJp2kConfigTrans625F1Line
OBJECT-TYPE
The following lines is valid: 625 Field 1: 6-22 625 Field 2: 319-335 525 Field 1: 10-19 525 Field 2: 10-18
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.1.1.13OCTET STRINGread-writecurrent
dcmIpgwASIOutJp2kConfigTrans625F2Line
OBJECT-TYPE
The following lines is valid: 625 Field 1: 6-22 625 Field 2: 319-335 525 Field 1: 10-19 525 Field 2: 10-18
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.1.1.14OCTET STRINGread-writecurrent
dcmIpgwASIOutJp2kConfigTrans525F1Line
OBJECT-TYPE
The following lines is valid: 625 Field 1: 6-22 625 Field 2: 319-335 525 Field 1: 10-19 525 Field 2: 10-18
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.1.1.15OCTET STRINGread-writecurrent
dcmIpgwASIOutJp2kConfigTrans525F2Line
OBJECT-TYPE
The following lines is valid: 625 Field 1: 6-22 625 Field 2: 319-335 525 Field 1: 10-19 525 Field 2: 10-18
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.1.1.16OCTET STRINGread-writecurrent
dcmIpgwASIOutJp2kAudioTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.2not-accessiblecurrent
dcmIpgwASIOutJp2kAudioEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.2.1not-accessiblecurrent
dcmIpgwASIOutJp2kAudioBoard
OBJECT-TYPE
Identification of the board where the ASI output stream is located.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.2.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwASIOutJp2kAudioPort
OBJECT-TYPE
Identification of the ASI output port. SDI output ports numbers range from 5..7 Monitor port is named 8
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.2.1.2Integer32 (5..8)not-accessiblecurrent
dcmIpgwASIOutJp2kAudioRef
OBJECT-TYPE
Same as the Port. An ASI port can only have 1 stream.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.2.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwASIOutJp2kAudioPair1Enable
OBJECT-TYPE
Enable/Disable Audio pair on JP2K output.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.2.1.4INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwASIOutJp2kAudioPair1Present
OBJECT-TYPE
Is Audio pair is present in the stream
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.2.1.5INTEGER {ePresent(1), eNotPresent(2)}read-onlycurrent
dcmIpgwASIOutJp2kAudioPair2Enable
OBJECT-TYPE
Enable/Disable Audio pair on JP2K output.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.2.1.6INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwASIOutJp2kAudioPair2Present
OBJECT-TYPE
Is Audio pair is present in the stream
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.2.1.7INTEGER {ePresent(1), eNotPresent(2)}read-onlycurrent
dcmIpgwASIOutJp2kAudioPair3Enable
OBJECT-TYPE
Enable/Disable Audio pair on JP2K output.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.2.1.8INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwASIOutJp2kAudioPair3Present
OBJECT-TYPE
Is Audio pair is present in the stream
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.2.1.9INTEGER {ePresent(1), eNotPresent(2)}read-onlycurrent
dcmIpgwASIOutJp2kAudioPair4Enable
OBJECT-TYPE
Enable/Disable Audio pair on JP2K output.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.2.1.10INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwASIOutJp2kAudioPair4Present
OBJECT-TYPE
Is Audio pair is present in the stream
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.2.1.11INTEGER {ePresent(1), eNotPresent(2)}read-onlycurrent
dcmIpgwASIOutJp2kAudioPair5Enable
OBJECT-TYPE
Enable/Disable Audio pair on JP2K output.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.2.1.12INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwASIOutJp2kAudioPair5Present
OBJECT-TYPE
Is Audio pair is present in the stream
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.2.1.13INTEGER {ePresent(1), eNotPresent(2)}read-onlycurrent
dcmIpgwASIOutJp2kAudioPair6Enable
OBJECT-TYPE
Enable/Disable Audio pair on JP2K output.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.2.1.14INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwASIOutJp2kAudioPair6Present
OBJECT-TYPE
Is Audio pair is present in the stream
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.2.1.15INTEGER {ePresent(1), eNotPresent(2)}read-onlycurrent
dcmIpgwASIOutJp2kAudioPair7Enable
OBJECT-TYPE
Enable/Disable Audio pair on JP2K output.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.2.1.16INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwASIOutJp2kAudioPair7Present
OBJECT-TYPE
Is Audio pair is present in the stream
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.2.1.17INTEGER {ePresent(1), eNotPresent(2)}read-onlycurrent
dcmIpgwASIOutJp2kAudioPair8Enable
OBJECT-TYPE
Enable/Disable Audio pair on JP2K output.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.2.1.18INTEGER {eEnable(1), eDisable(2)}read-writecurrent
dcmIpgwASIOutJp2kAudioPair8Present
OBJECT-TYPE
Is Audio pair is present in the stream
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.6.2.2.1.19INTEGER {ePresent(1), eNotPresent(2)}read-onlycurrent
dcmIpgwSystem
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.7
dcmIpgwSystemGenlockEnableTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.7.1not-accessiblecurrent
dcmIpgwSystemGenlockEnableEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.7.1.1not-accessiblecurrent
dcmIpgwSystemGenlockEnableBoard
OBJECT-TYPE
Identification of the board where the Genlock can be Enabled/Disabled.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.7.1.1.1Integer32 (1..4)not-accessiblecurrent
dcmIpgwSystemGenlockEnablePort
OBJECT-TYPE
Not Used.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.7.1.1.2Integer32 (0)not-accessiblecurrent
dcmIpgwSystemGenlockEnableRef
OBJECT-TYPE
Not used.
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.7.1.1.3Integer32 (0..65535)not-accessiblecurrent
dcmIpgwSystemGenlockEnableState
OBJECT-TYPE
Enable or disable use of Genlock for the Board
1.3.6.1.4.1.1482.20.3.2.2.3.1.8.7.1.1.4INTEGER {eActive(1), eNotActive(2)}read-writecurrent
dcmMibObjects
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.2
dcmPhysVendorType
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.2.1
dcmDevice
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.2.1.1
dcmIoBoard
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.2.1.2
dcm100BaseTPort
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.2.1.3
dcmGbePort
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.2.1.4
dcmAsiPort
OBJECT-IDENTITY
1.3.6.1.4.1.1482.20.3.2.2.3.2.1.5

Conformance

NameOIDStatus
saEuropeDcmModuleCompliance
MODULE-COMPLIANCE
The compliance statement for entities which implement the SA Europe DCM MIB
1.3.6.1.4.1.1482.1.3.2.2.1.1current
dcmMandatoryGroup
OBJECT-GROUP
Mandatory objects for all devices implementing the SA Europe DCM MIB.
1.3.6.1.4.1.1482.1.3.2.2.1.2current
dcmOptionalGroup
OBJECT-GROUP
Optional objects in the SA Europe DCM MIB.
1.3.6.1.4.1.1482.1.3.2.2.1.3current
dcmIpgwGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.1482.1.3.2.2.1.4current