RUGGEDCOM-SYS-INFO-MIB
- Registered at
- 1.3.6.1.4.1.15004.4.2
- Last updated
- 2014-10-08 17:00
- Organization
- RuggedCom
- Revisions
- 2014-10-08 17:00, 2012-08-30 17:00, 2012-06-01 17:00, 2011-04-05 10:00, 2010-09-16 13:00, 2009-05-17 13:00, 2008-12-17 13:00, 2008-10-09 10:00, 2008-09-12 14:00, 2008-02-15 14:00, 2006-09-06 14:00
- Namespace
- ros
- Source file
RUGGEDCOM-SYS-INFO-MIB- Digest
sha256:c7b063ef1314589199f999766f7a63309845e08bd1aca8e41226974160b177c8
Description
RuggedCom system information MIB.
Contact
Postal: RuggedCom Inc. 300 Applewood Crescent Concord, Ontario, L4K 5C7 Canada Tel: 1-905-856-5288 E-Mail: support@ruggedcom.com
Imports
| From | Symbols |
|---|---|
| RUGGEDCOM-MIB | ruggedcomMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
RUGGEDCOM-MIB RUGGEDCOM-SYS-INFO-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| RcFanStatus TEXTUAL-CONVENTION The status of a fan-bank. | current | |||
| RcHardwareStatus TEXTUAL-CONVENTION A status of a hardware module in the RuggedCom device. | current | |||
| RcHotswapModuleSlot TEXTUAL-CONVENTION A physical slot holding the hotswapable module (ROX 2 specific). As the value 0 is forbidden in SNMP enumerations, this value is the value 1 higher than some other ROX 2 slot values | current | |||
| RcHotswapModuleState TEXTUAL-CONVENTION A status of a hardware module in the RuggedCom device. | current | |||
| RcMainBoard TEXTUAL-CONVENTION A main board type code. This textual convention will be updated any time when new main board type is developed. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| rcDeviceError OBJECT-IDENTITY The main subtree for various errors detected in RuggedCom devices. | 1.3.6.1.4.1.15004.4.2.1 | current | ||
| rcDeviceErrBootupError OBJECT-TYPE The error discovered during bootup process. If there was no error during device bootup, zero length string will be retreived. | 1.3.6.1.4.1.15004.4.2.1.1 | DisplayString | read-only | current |
| rcDeviceErrWatchdogReset OBJECT-TYPE Indicates whether the last device reboot was caused by wachdog. | 1.3.6.1.4.1.15004.4.2.1.2 | TruthValue | read-only | current |
| rcDeviceErrConfigurationFailure OBJECT-TYPE Indicates whether errors were detected while applying configuration settings from configuration file. Configuration is updated from the configureation file at bootup time when file is loaded from nonvolatile memory, or when new file is downloaded to the device. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification. | 1.3.6.1.4.1.15004.4.2.1.3 | TruthValue | read-only | current |
| rcDeviceErrCrashLogCreated OBJECT-TYPE Indicates whether the device error that caused creation of an entry in crashlog.txt file was detected. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification. | 1.3.6.1.4.1.15004.4.2.1.4 | TruthValue | read-only | current |
| rcDeviceErrStackOverflow OBJECT-TYPE Indicates whether the stack of any of the system tasks is used over the system threshold. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification. | 1.3.6.1.4.1.15004.4.2.1.5 | TruthValue | read-only | current |
| rcDeviceErrHeapError OBJECT-TYPE Indicates whether the system memory corruption was detected. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification. | 1.3.6.1.4.1.15004.4.2.1.6 | TruthValue | read-only | current |
| rcDeviceErrDateAndTimeSetFailed OBJECT-TYPE Indicates whether the date and time setting in the device falied. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification. | 1.3.6.1.4.1.15004.4.2.1.7 | TruthValue | read-only | current |
| rcDeviceErrNtpServerUnreachable OBJECT-TYPE Indicates whether the NTP server (if required) can be reached. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification. | 1.3.6.1.4.1.15004.4.2.1.8 | TruthValue | read-only | current |
| rcDeviceErrBootPTftpTrFailed OBJECT-TYPE Indicates whether the the file was transfered properly after obtaining IP address from the BootP server. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification. | 1.3.6.1.4.1.15004.4.2.1.9 | TruthValue | read-only | current |
| rcDeviceErrRadiusServerUnreachable OBJECT-TYPE Indicates whether the RADIUS server (if required) can be reached. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification. | 1.3.6.1.4.1.15004.4.2.1.10 | TruthValue | read-only | current |
| rcDeviceErrTacacsServerUnreachable OBJECT-TYPE Indicates whether the TACACS+ server (if required) can be reached. Whenever the value of this object changes from false(2) to true(1), the device will generate genericTrap notification. | 1.3.6.1.4.1.15004.4.2.1.11 | TruthValue | read-only | current |
| rcDeviceStatus OBJECT-IDENTITY The main subtree for various status information detected in RuggedCom devices. | 1.3.6.1.4.1.15004.4.2.2 | current | ||
| rcDeviceStsCpuUsage OBJECT-TYPE The percentage in tenths of percent of available CPU cycles used for device operation as measured over the last second when object was retreived. | 1.3.6.1.4.1.15004.4.2.2.1 | Integer32 | read-only | current |
| rcDeviceStsAvailableRam OBJECT-TYPE The total number of bytes of RAM still available in the system control CPU. | 1.3.6.1.4.1.15004.4.2.2.2 | Integer32 | read-only | current |
| rcDeviceStsTemperature OBJECT-TYPE The temperature measured in the device. | 1.3.6.1.4.1.15004.4.2.2.3 | Integer32 | read-only | current |
| rcDeviceStsPowerSupply1 OBJECT-TYPE Indicates the status of Power Supply Module 1. Whenever the value of this object changes from functional(2) to notFunctional(3), or from notFunctionl(3) to functional(2), the device will generate powerSupplyTrap notification. | 1.3.6.1.4.1.15004.4.2.2.4 | RcHardwareStatus | read-only | current |
| rcDeviceStsPowerSupply2 OBJECT-TYPE Indicates the status of Power Supply Module 2. Whenever the value of this object changes from functional(2) to notFunctional(3), or from notFunctionl(3) to functional(2), the device will generate powerSupplyTrap notification. | 1.3.6.1.4.1.15004.4.2.2.5 | RcHardwareStatus | read-only | current |
| rcDeviceStsCpuUsagePercent OBJECT-TYPE The percentage of available CPU cycles used for device operation as measured over the last second when object was retreived. | 1.3.6.1.4.1.15004.4.2.2.6 | Integer32 | read-only | current |
| rcDeviceStsFailSafeRelay OBJECT-TYPE Indicates status of fail safe relay in the device. Fail safe relay is deEnergized(2) if there is at least one active alarm recorded in the device. | 1.3.6.1.4.1.15004.4.2.2.7 | INTEGER {energized(1), deEnergized(2)} | read-only | current |
| rcDeviceStsErrorAlarm OBJECT-TYPE Indicates that at least one alarm of level ERROR, ALERT or CRITICAL is active in the device. | 1.3.6.1.4.1.15004.4.2.2.8 | TruthValue | read-only | current |
| rcDeviceStsNoOfActiveAlarms OBJECT-TYPE Number of active alarms currently recorded in device. | 1.3.6.1.4.1.15004.4.2.2.9 | Integer32 | read-only | current |
| rcDeviceStsFanBank1 OBJECT-TYPE Indicates the status of Fan Bank Module 1. | 1.3.6.1.4.1.15004.4.2.2.10 | RcFanStatus | read-only | current |
| rcDeviceStsFanBank2 OBJECT-TYPE Indicates the status of Fan Bank Module 2. | 1.3.6.1.4.1.15004.4.2.2.11 | RcFanStatus | read-only | current |
| rcDeviceStsPwdsWeak OBJECT-TYPE Indicates if any of passwords is configured as 'weak'. Change in the value of the bit in this object from '0' to '1' will generate weakPasswordTrap. | 1.3.6.1.4.1.15004.4.2.2.12 | Bits {adminPwd(0), operPwd(1), guestPwd(2)} | read-only | current |
| rcDeviceStsKeysDflt OBJECT-TYPE Indicates if any of secure services uses default keys and/or certificates. Customer is advised to update keys for secure services if defaults are used. Change in the value of the bit in this object from '0' to '1' will generate defaultKeysTrap notification. | 1.3.6.1.4.1.15004.4.2.2.13 | Bits {sshDfltKeys(0), sslDfltKeys(1)} | read-only | current |
| rcDeviceInfo OBJECT-IDENTITY The main subtree for RuggedCom devices manufacturing information. | 1.3.6.1.4.1.15004.4.2.3 | current | ||
| rcDeviceInfoSerialNumber OBJECT-TYPE The manufacturing serial number of the device. | 1.3.6.1.4.1.15004.4.2.3.1 | DisplayString | read-only | current |
| rcDeviceInfoBootSwVersion OBJECT-TYPE The version and the build date of the boot loader software. | 1.3.6.1.4.1.15004.4.2.3.2 | DisplayString | read-only | current |
| rcDeviceInfoMainSwVersion OBJECT-TYPE The version and the build date of the main operating system software. | 1.3.6.1.4.1.15004.4.2.3.3 | DisplayString | read-only | current |
| rcDeviceInfoMainBoardType OBJECT-TYPE The identification code of the device main board. | 1.3.6.1.4.1.15004.4.2.3.4 | RcMainBoard | read-only | current |
| rcDeviceInfoTotalRam OBJECT-TYPE The total number of bytes of RAM in the system control CPU. | 1.3.6.1.4.1.15004.4.2.3.5 | Integer32 | read-only | current |
| rcDeviceInfoPendingBootSwVersion OBJECT-TYPE The version and the build date of the boot loader software that has been loaded to the device and is pending reboot. Whenever the value of this object changes from zero-length string to any string of non-zero length, the device will generate swUpgradeTrap notification. | 1.3.6.1.4.1.15004.4.2.3.6 | DisplayString | read-only | current |
| rcDeviceInfoPendingMainSwVersion OBJECT-TYPE The version and the build date of the main operating system software that has been loaded to the device and is pending reboot. Whenever the value of this object changes from zero-length string to any string of non-zero length, the device will generate swUpgradeTrap notification. | 1.3.6.1.4.1.15004.4.2.3.7 | DisplayString | read-only | current |
| rcDeviceInfoCfgRevision OBJECT-TYPE The configuration file revision. The revision number will be updated whenever file is saved to the flash memory. This number is recorded in config.csv at the time file is uploaded from the device. Whenever the value of this object changes the device will generate cfgChangeTrap notification. | 1.3.6.1.4.1.15004.4.2.3.8 | Integer32 | read-only | current |
| rcDeviceInfoMinBootSwVer OBJECT-TYPE The minimum version of the boot loader software required by ROS device. If this version is not newer than the version retreived as a value of object rcDeviceInfoBootSwVersion, trap bootVersionMismatchTrap will be generated. | 1.3.6.1.4.1.15004.4.2.3.9 | DisplayString | read-only | current |
| rcDeviceCommands OBJECT-IDENTITY The main subtree for device control commands. | 1.3.6.1.4.1.15004.4.2.4 | current | ||
| rcDeviceCommReset OBJECT-TYPE Setting the value of this object to 'true(1)' will cause device to reboot. As a result of Read request the agent will return value 'false(2)'. | 1.3.6.1.4.1.15004.4.2.4.1 | TruthValue | read-write | current |
| rcDeviceCommLoadDefaultCfg OBJECT-TYPE Setting the value of this object to 'true(1)' will force device to load default configuration to all tables. As a result of Read request the agent will return value 'false(2)'. | 1.3.6.1.4.1.15004.4.2.4.2 | TruthValue | read-write | current |
| rcDeviceCommClearAlarms OBJECT-TYPE Setting the value of this object to 'true(1)' will cause device to clear all alarms. As a result of Read request the agent will return value 'false(2)'. | 1.3.6.1.4.1.15004.4.2.4.3 | TruthValue | read-write | current |
| rcDeviceCommClearSyslog OBJECT-TYPE Setting the value of this object to 'true(1)' will cause device to clear syslog.txt file. As a result of Read request the agent will return value 'false(2)'. | 1.3.6.1.4.1.15004.4.2.4.4 | TruthValue | read-write | current |
| rcDeviceCommClearLogs OBJECT-TYPE Setting the value of this object to 'true(1)' will cause device to clear syslog.txt and crashlog.txt files. As a result of Read request the agent will return value 'false(2)'. | 1.3.6.1.4.1.15004.4.2.4.5 | TruthValue | read-write | current |
| rcDeviceCommIdentify OBJECT-TYPE Time Period in seconds for which the device should continue flashing the LEDs when possible so that device is visually recognized. Setting this value to any value greater than 0 will start LED flash timer on the device.Setting the value to 0 will stop the LED flash timer. On Read request agent always sends back the existing Timeout value for LED flash Timer. | 1.3.6.1.4.1.15004.4.2.4.6 | Integer32 (0..300) | read-write | current |
| rcSysInfoConformance OBJECT-IDENTITY | 1.3.6.1.4.1.15004.4.2.5 | |||
| rcSysInfoGroups OBJECT-IDENTITY | 1.3.6.1.4.1.15004.4.2.5.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| rcSysErrObjectsGroup OBJECT-GROUP A group of objects providing information about irregularities in the device. | 1.3.6.1.4.1.15004.4.2.5.2.1 | current |
| rcSysStsObjectsGroup OBJECT-GROUP A group of objects providing information device resources. | 1.3.6.1.4.1.15004.4.2.5.2.2 | current |
| rcSysStsObjectsTemperatureGroup OBJECT-GROUP This group is created to allow MIBs for products that do not have temperature sensore installed to exclude rcDeviceStsTemperature object. | 1.3.6.1.4.1.15004.4.2.5.2.3 | current |
| rcSysStsPowerSupplyGroup OBJECT-GROUP A group of objects providing information about power supply modules in the device. This group is mandatory for products with redundant power supply. | 1.3.6.1.4.1.15004.4.2.5.2.4 | current |
| rcSysInfoDeviceInfoGroup OBJECT-GROUP A group of object providing manufacturer's information about product's main board hardware, software, identification. | 1.3.6.1.4.1.15004.4.2.5.2.5 | current |
| rcSysDeviceCommGroup OBJECT-GROUP A group of object providing device control commands. | 1.3.6.1.4.1.15004.4.2.5.2.6 | current |
| rcSysDeviceCommIdentifyGroup OBJECT-GROUP A group of object providing device control commands for visual recognisation of the device (LED flashing). | 1.3.6.1.4.1.15004.4.2.5.2.7 | current |
| rcSysStsObjectsGroup1 OBJECT-GROUP A group of objects providing information device resources. | 1.3.6.1.4.1.15004.4.2.5.2.8 | current |
| rcSysStsFanBankGroup OBJECT-GROUP A group of objects providing information about fan bank modules in the device. This group is mandatory for products with redundant fan banks. | 1.3.6.1.4.1.15004.4.2.5.2.9 | current |
| rcSysDeviceSecurityGroup OBJECT-GROUP A group of object providing device control commands. | 1.3.6.1.4.1.15004.4.2.5.2.10 | current |
| rcSysDeviceSecurityGroup01 OBJECT-GROUP A group of object providing device control commands. | 1.3.6.1.4.1.15004.4.2.5.2.11 | current |