RUCKUS-PPPOE-MIB
- Registered at
- 1.3.6.1.4.1.25053.1.1.8.1
- Last updated
- 2010-10-15 08:00
- Organization
- Ruckus Wireless, Inc
- Namespace
- ruckus
- Source file
RUCKUS-PPPOE-MIB- Digest
sha256:e7bc13cf29eca52f147de2d2b3054d9014630485f67979713976f61f1c65b622
Description
Ruckus PPPoE mib objects.
Contact
Ruckus Wireless Inc. Postal: 350 West Java Dr. Sunnyvale, CA 94089 USA EMail: support@ruckuswireless.com Phone: +1-650-265-4200.
Imports
| From | Symbols |
|---|---|
| IF-MIB | InterfaceIndex |
| RUCKUS-ROOT-MIB | ruckusCommonPPPOEModule |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB RUCKUS-PPPOE-MIB RUCKUS-ROOT-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ruckusPPPOEObjects OBJECT-IDENTITY | 1.3.6.1.4.1.25053.1.1.8.1.1 | |||
| ruckusPPPOEInfo OBJECT-IDENTITY | 1.3.6.1.4.1.25053.1.1.8.1.1.1 | |||
| ruckusPPPOEUserName OBJECT-TYPE Specifies PPPoE user name. But it will not be effective unless you set apply(1) to ruckusPPPOEApply. | 1.3.6.1.4.1.25053.1.1.8.1.1.1.1 | DisplayString (SIZE(1..64)) | read-write | current |
| ruckusPPPOEPassword OBJECT-TYPE Specifies PPPoE password. But it will not be effective unless you set apply(1) to ruckusPPPOEApply. | 1.3.6.1.4.1.25053.1.1.8.1.1.1.2 | OCTET STRING (SIZE(1..64)) | read-write | current |
| ruckusPPPOEConnectionStatus OBJECT-TYPE Specifies PPPoE connection status. Return up(1) if connection is up, down(2) if connection is down, disabled(3) if PPPoE is disabled. | 1.3.6.1.4.1.25053.1.1.8.1.1.1.3 | INTEGER {connected(1), notConnected(2)} | read-only | current |
| ruckusPPPOEConnection OBJECT-TYPE Set connect(1) to connect or re-connect and disConnect(2) to PPPoE server. On read, return enabled(3) if PPPoE is enabled, or disabled(4) if PPPoE is disabled. | 1.3.6.1.4.1.25053.1.1.8.1.1.1.4 | INTEGER {connect(1), disConnect(2), ok(3), disabled(4)} | read-write | current |
| ruckusPPPOEIfindex OBJECT-TYPE Specifies the interface index, in the ifTable. | 1.3.6.1.4.1.25053.1.1.8.1.1.1.5 | InterfaceIndex | read-only | current |
| ruckusPPPOEApply OBJECT-TYPE Set apply(1) to apply the change of username and password for PPPoE . Firstly, set the mib nodes : ruckusPPPOEUserName and ruckusPPPOEPassword . Secondly, set apply(1) to enable this PPPOE's username and password . For read, only return 0. | 1.3.6.1.4.1.25053.1.1.8.1.1.1.6 | INTEGER {apply(1)} | read-write | current |
| ruckusPPPOEEvents OBJECT-IDENTITY | 1.3.6.1.4.1.25053.1.1.8.1.2 |