MIBs Depot

RS-XX9-TX-MIB

Registered at
1.3.6.1.4.1.2566.127.1.2.216.3.0
1.3.6.1.4.1.2566.127.1.2.216.3.1
1.3.6.1.4.1.2566.127.1.2.216.3.2
1.3.6.1.4.1.2566.149.1.216.3
Last updated
2016-05-04 15:00
Organization
Rohde&Schwarz GmbH & Co. KG
Revisions
2016-05-04 15:00, 2016-04-05 15:00, 2016-03-08 09:00, 2016-01-28 11:00, 2015-11-30 08:00, 2015-11-26 18:00, 2015-10-19 16:00, 2015-07-02 12:00, 2014-12-22 16:00, 2014-10-09 14:00, 2014-04-30 16:00, 2014-02-04 17:00, 2013-11-18 13:00, 2013-03-18 08:00, 2011-08-19 08:00
Namespace
rs
Source file
RS-XX9-TX-MIB
Digest
sha256:8c930aa1806dac4930e840591923e0806f6081ba7626a1c4c5847f469ab206a0

Description

This MIB defines transmitter specific objects of XX9000 transmitting systems from Rohde & Schwarz that are independent of modulation mode. Use this MIB for things all transmitters support via SNMP. The following MIBs are related to this: - RS-COMMON-MIB - mandatory for this MIB. - RS-XX9-SMI-MIB - mandatory for this MIB. - RS-XX9-TC-MIB - mandatory for this MIB. - RS-XX9-COMMON-MIB - mandatory for this MIB.

Contact

Rohde & Schwarz GmbH & Co. KG Broadcasting Division Muehldorfstrasse 15 81671 Munich Germany customersupport@rohde-schwarz.com

Imports

FromSymbols
INET-ADDRESS-MIBInetAddress, InetAddressType
RS-XX9-COMMON-MIBcommonNotificationAlarmClass
RS-XX9-SMI-MIBrsXx9MibModule, rsXx9Tx
RS-XX9-TC-MIBIndexAB, IndexTransmitter, NotificationClass, NotificationMask, NotificationPriority, NotificationState, SwitchOnOff, Trigger, Xx9ModulationMode
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ENTITY-MIB
IANA-ENTITY-MIB
INET-ADDRESS-MIB
RS-COMMON-MIB
RS-XX9-COMMON-MIB
RS-XX9-SMI-MIB
RS-XX9-TC-MIB
RS-XX9-TX-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
UUID-TC-MIB

Textual conventions

NameOIDSyntaxAccessStatus
AutomaticMode
TEXTUAL-CONVENTION
Determines behaviour after successful switching: severalTimes(1) - automatic switches back autonomously to the preselected exciter if the reserve exciter is faulty and the preselected exciter is ready singleShot(2) -
current
ControllerMode
TEXTUAL-CONVENTION
Description.
current
DohertyActive
TEXTUAL-CONVENTION
Description.
current
PrecorrectionOperationMode
TEXTUAL-CONVENTION
bypass(1) - precorrector is deactivated, input signal is not modified stop(2) - automatic precorrection is deactivated, input signal is modified from a constant curve run(4) - automatic precorrection is active
current
PrecorrectionSignalLevel
TEXTUAL-CONVENTION
State of RF input level: ok(2) - level is within operation area tooLow(3) - level is too low tooHigh(4) - level is too high noInput(5) - no input for run mode
current
PrecorrectionState
TEXTUAL-CONVENTION
idle(1) - precorrector not active acquisition(2) - precorrector collects new measured values calculation(3) - precorrector calculates new curve checkResult(4) - precorrector checks result for plausibility
current
SatSignalType
TEXTUAL-CONVENTION
Description.
current

Objects

NameOIDSyntaxAccessStatus
rsXx9TxNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.3.0
rsXx9TxObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.3.1
txTransmitter
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.3.1.1
txTransmitterNotificationTable
OBJECT-TYPE
The context information/configuration for the general transmitter status notifications.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.1not-accessiblecurrent
txTransmitterNotificationEntry
OBJECT-TYPE
An entry in the txGeneralNotificationTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.1.1not-accessiblecurrent
txTransmitterNotificationTxIdx
OBJECT-TYPE
The transmitter index.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.1.1.1IndexTransmitternot-accessiblecurrent
txTransmitterNotificationIdx
OBJECT-TYPE
The notification number as below rsXx9TxNotifications. This is a helper column and therefore not-accessible.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.1.1.2Unsigned32 (1..10 | 1000..1004 | 1500..1504)not-accessiblecurrent
txTransmitterNotificationName
OBJECT-TYPE
The notification number as an enumeration. The enumeration correlates with the notifications under rsXx9TxNotifications.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.1.1.3INTEGER {txSummary(1), txRF(2), txReflection(3), txRfSensorSummary(4), txLocal(5), txExciterAutomaticOn(6), txExciterAutomaticReady(7), txExciterAutomaticSwitchedOver(8), txExciterAutomaticRfSwitchSummary(9), txExciterAutomaticSummary(10), txActiveReserveExcAutoOn(1000), txActiveReserveExcAutoReady(1001), txActiveReserveExcAutoSwitchedOver(1002), txActiveReserveExcAutoRfSwitchSummary(1003), txActiveReserveExcAutoSummary(1004), txActiveReserveOstAutoOn(1500), txActiveReserveOstAutoReady(1501), txActiveReserveOstAutoSwitchedOver(1502), txActiveReserveOstAutoRfSwitchSummary(1503), txActiveReserveOstAutoSummary(1504)}read-onlycurrent
txTransmitterNotificationMask
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.1.1.4NotificationMaskread-writecurrent
txTransmitterNotificationPriority
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.1.1.5NotificationPriorityread-writecurrent
txTransmitterNotificationState
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.1.1.6NotificationStateread-onlycurrent
txTransmitterCommandsTable
OBJECT-TYPE
General transmitter settings.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.2not-accessiblecurrent
txTransmitterCommandsEntry
OBJECT-TYPE
An entry in the txGeneralCommandsTable table.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.2.1not-accessiblecurrent
txTransCmdReset
OBJECT-TYPE
Switch used to reset all faults stored in the transmitter. Stored faults are: Reflection Fail. Resetting stored faults can cause automatic redundancy functions, which are currently in the switched-over state, to switch back to their original preselected state.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.2.1.1Triggerread-writecurrent
txTransCmdOperationMode
OBJECT-TYPE
Switch used to switch the components in the program path of the transmitter on and off.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.2.1.2SwitchOnOffread-writecurrent
txTransCmdNominalPower
OBJECT-TYPE
The nominal power of the transmitter must be set here. The nominal power is defined by the number and type of amplifiers as well as by the used TV standard.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.2.1.3Unsigned32read-writecurrent
txTransCmdReserveOpMode
OBJECT-TYPE
Switch used to switch all components in the standby path of the transmitter on and off. (standby exciter with 'dual drive' redundancy concept and standby output stage with 'active PA Reserve' redundancy concept).
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.2.1.4SwitchOnOffread-writecurrent
txTransCmdChangeModulation
OBJECT-TYPE
Changes the modulation mode of the transmitter (without rebootint). Get requests will return none(2). A Set request with the desired modulation mode does trigger a modulation mode switch. A modulation mode switch does only happen, if the mode is switching to one of the preconfigured modulation modes (txTransStPrimaryModMode or txTransStPrimaryModMode).
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.2.1.5Xx9ModulationModeread-writecurrent
txTransCmdReflectionCheck
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.2.1.6INTEGER {keepRfOff(1), checkThreeTimes(2)}read-writecurrent
txTransCmdPrgOnAfterSumFault
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.2.1.7TruthValueread-writecurrent
txTransCmdWarnOnDohertyMismatch
OBJECT-TYPE
Description. only has an effect on transmitters with doherty amplifiers.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.2.1.8SwitchOnOffread-writecurrent
txTransmitterStateTable
OBJECT-TYPE
General transmitter status.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.3not-accessiblecurrent
txTransmitterStateEntry
OBJECT-TYPE
An entry in the txTransmitterStateTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.3.1not-accessiblecurrent
txTransStForwardPower
OBJECT-TYPE
Forward power of the transmitter.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.3.1.1Unsigned32read-onlycurrent
txTransStReflectedPower
OBJECT-TYPE
Reflected power of the transmitter.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.3.1.2Unsigned32read-onlycurrent
txTransStModulationMode
OBJECT-TYPE
Modulation mode of the transmitter.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.3.1.3Xx9ModulationModeread-onlycurrent
txTransStPrimaryModMode
OBJECT-TYPE
Configured primary modulation mode of the transmitter.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.3.1.4Xx9ModulationModeread-onlycurrent
txTransStSecondaryModMode
OBJECT-TYPE
Configured secondary modulation mode of the transmitter.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.3.1.5Xx9ModulationModeread-onlycurrent
txTransStPaEfficiency
OBJECT-TYPE
Shows efficiency of all amplifiers (including loss of combiners but without power consumption of TCE900 and cooling system) values <0 are invalid, because PA-efficiency could not be calculated
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.3.1.6Integer32 (-999..999)read-onlycurrent
txExciterAutomaticTable
OBJECT-TYPE
Exciter automatic configuration and status.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.4not-accessiblecurrent
txExciterAutomaticEntry
OBJECT-TYPE
An entry in the txExciterAutomaticTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.4.1not-accessiblecurrent
txExcAutoOperationMode
OBJECT-TYPE
Switches the automatic exciter switchover on and off.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.4.1.1SwitchOnOffread-writecurrent
txExciterAutomaticMode
OBJECT-TYPE
Determines the behavior after successfully switching over to a standby exciter. singleShot(2) - The selector of the automatic exciter switchover remains fixed on the standby exciter until either the preselection of the exciter is pressed again or the 'Reset Faults Transmitter' button is pressed. severalTimes(1) - The automatic switchover automatically switches back to the preselected exciter as soon as the standby exciter signals an error and the preselected exciter is operational again.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.4.1.2AutomaticModeread-writecurrent
txExcAutoGuardTime
OBJECT-TYPE
Indicates the configured checkout time which must elapse before being able to switch to another exciter. This can be used to make sure that short-term errors do not immediately cause a switchover. The Guard Time is also effective for switching over to the preselected exciter in the 'Multiple Switch' switch mode. The setting can be changed here.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.4.1.3Unsigned32 (1..60)read-writecurrent
txExcAutoPreselectExcA
OBJECT-TYPE
Preselect exciter A.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.4.1.4Triggerread-writecurrent
txExcAutoPreselectExcB
OBJECT-TYPE
Preselect exciter B.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.4.1.5Triggerread-writecurrent
txExcAutoPreselected
OBJECT-TYPE
The preselected exciter. Indicates which exciter has been preselected for operation. If the 'Switch Mode' of the automatic switchover function is configured to 'Single Switch' and the exciter switched over, the switchover can be undone by selecting the preselected exciter again.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.4.1.6IndexABread-onlycurrent
txExcAutoRfSwitchPosition
OBJECT-TYPE
The active exciter.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.4.1.7IndexABread-onlycurrent
txActiveReserve
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.5
txActiveReserveExciterTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.5.1not-accessiblecurrent
txActiveReserveExciterEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.5.1.1not-accessiblecurrent
txArExcAutomaticOperationMode
OBJECT-TYPE
Switches the automatic exciter switchover on and off.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.5.1.1.1SwitchOnOffread-writecurrent
txArExcAutomaticMode
OBJECT-TYPE
Determines the behavior after successfully switching over to a standby exciter. singleShot(2) - The automatic exciter switchover selector remains fixed to the standby exciter until the 'Recommend Selection' button is pressed. severalTimes(1) - The automatic switchover automatically switches back to the preselected exciter as soon as the standby exciter signals an error and the preselected exciter is operational again.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.5.1.1.2AutomaticModeread-writecurrent
txArExcAutomaticGuardTime
OBJECT-TYPE
Indicates the configured checkout time which must elapse before being able to switch to another exciter. This can be used to make sure that short-term errors do not immediately cause a switchover. The Guard Time is also effective for switching over to the preselected exciter in the 'Multiple Switch' switch mode. The setting can be changed here.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.5.1.1.3Unsigned32 (1..60)read-writecurrent
txArPreselectExcA
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.5.1.1.4Triggerread-writecurrent
txArPreselectExcB
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.5.1.1.5Triggerread-writecurrent
txArExcPreselected
OBJECT-TYPE
Indicates which exciter has been preselected for operation. The setting can be changed here. If the 'Switch Mode' of the automatic switchover function is configured to 'Single Switch' and the exciter switched over, the switchover can be undone by selecting the preselected exciter again.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.5.1.1.6IndexABread-onlycurrent
txArExcSelected
OBJECT-TYPE
Indicates which exciter is currently active, i.e. is working on the antenna depending on the switch state of the automatic exciter switchover.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.5.1.1.7INTEGER {exciterA(1), exciterB(2), undefined(3)}read-onlycurrent
txActiveReserveOstTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.5.2not-accessiblecurrent
txActiveReserveOstEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.5.2.1not-accessiblecurrent
txArOstAutomaticOperationMode
OBJECT-TYPE
Switches on and off the output-stage switchover function.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.5.2.1.1SwitchOnOffread-writecurrent
txArOstAutomaticMode
OBJECT-TYPE
Determines the behavior after successfully removing an output stage from the signal path. singleShot(2) - The output stage switch remains permanently fixed in the new position until either the configuration of the output stage is reset or until the 'Reset Faults Transmitter' button is pressed. severalTimes(1) - The automatic switchover function automatically switches the formerly defective output stage back into the signal path.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.5.2.1.2AutomaticModeread-writecurrent
txArOstAutomaticGuardTime
OBJECT-TYPE
Indicates the configured checkout time which must elapse before an output stage is removed from the signal path. This can be used to make sure that short-term errors do not cause toggling. The Guard Time is also effective in the 'Multiple Switch' switch mode for switching over to the preselected configuration of the output stages. The setting can be changed here.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.5.2.1.3Unsigned32 (1..60)read-writecurrent
txArPreselectOstAOstBtoAnt
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.5.2.1.4Triggerread-writecurrent
txArPreselectOstAOstBtoDl
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.5.2.1.5Triggerread-writecurrent
txArPreselectOstAtoAntOstBtoDl
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.5.2.1.6Triggerread-writecurrent
txArPreselectOstAtoDlOstBtoAnt
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.5.2.1.7Triggerread-writecurrent
txArOstPreselected
OBJECT-TYPE
Indicates how the two Output Stages A and B are to be interconnected to each other.
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.5.2.1.8INTEGER {ostAandOstBtoAntenna(1), ostAandOstBtoDummyload(2), ostAtoAntennaAndOstBtoDummyload(3), ostAtoDummyloadAndOstBtoAntenna(4)}read-onlycurrent
txArOstSelected
OBJECT-TYPE
5=Undefined, 1=Ost A+B->Ant, 2=A+B->DL, 3=A->Ant /B->DL, 4=B->Ant /A->DL
1.3.6.1.4.1.2566.127.1.2.216.3.1.1.5.2.1.9INTEGER {ostAandOstBtoAntenna(1), ostAandOstBtoDummyload(2), ostAtoAntennaAndOstBtoDummyload(3), ostAtoDummyloadAndOstBtoAntenna(4), undefined(5)}read-onlycurrent
txExciter
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.3.1.2
txExciterNotificationTable
OBJECT-TYPE
The context information/configuration for the exciter status notifications.
1.3.6.1.4.1.2566.127.1.2.216.3.1.2.1not-accessiblecurrent
txExciterNotificationEntry
OBJECT-TYPE
An entry in the txExciterNotificationTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.2.1.1not-accessiblecurrent
txExciterNotificationTxIdx
OBJECT-TYPE
The transmitter index.
1.3.6.1.4.1.2566.127.1.2.216.3.1.2.1.1.1IndexTransmitternot-accessiblecurrent
txExciterNotificationExcIdx
OBJECT-TYPE
This index distinguishes the exiters. Necessary if you have dual drive transmitters.
1.3.6.1.4.1.2566.127.1.2.216.3.1.2.1.1.2IndexABnot-accessiblecurrent
txExciterNotificationIdx
OBJECT-TYPE
The notification number as below rsXx9TxNotifications. This is a helper column and therefore not-accessible.
1.3.6.1.4.1.2566.127.1.2.216.3.1.2.1.1.3Unsigned32 (2000..2004)not-accessiblecurrent
txExciterNotificationName
OBJECT-TYPE
The notification number as an enumeration. The enumeration correlates with the notifications under rsXx9TxNotifications.
1.3.6.1.4.1.2566.127.1.2.216.3.1.2.1.1.4INTEGER {txExciterSummary(2000), txExciterLoop(2001), txExciterMute(2002), txExciterOutputConnect(2003), txExciterRfState(2004)}read-onlycurrent
txExciterNotificationMask
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.2.1.1.5NotificationMaskread-writecurrent
txExciterNotificationPriority
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.2.1.1.6NotificationPriorityread-writecurrent
txExciterNotificationState
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.2.1.1.7NotificationStateread-onlycurrent
txExciterCommandsTable
OBJECT-TYPE
Exciter settings.
1.3.6.1.4.1.2566.127.1.2.216.3.1.2.2not-accessiblecurrent
txExciterCommandsEntry
OBJECT-TYPE
An entry in the txExciterCommandsTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.2.2.1not-accessiblecurrent
txExcCmdFrequency
OBJECT-TYPE
The transmitter frequency. Its interpretation is modulation dependent: DVB-T, DVB-T2, DTMB, DAB, ISDB-T - channel center frequency ATSC - pilot carrier frequency ATV - video carrier frequency FM - carrier frequency For band II transmitters the range is 87500000 - 108000000 Hz. For all other transmitters the range is 160000000 - 870000000 Hz.
1.3.6.1.4.1.2566.127.1.2.216.3.1.2.2.1.1Unsigned32 (87500000..108000000 | 160000000..870000000)read-writecurrent
txExcCmdModulationMode
OBJECT-TYPE
Modulation mode of the exciter.
1.3.6.1.4.1.2566.127.1.2.216.3.1.2.2.1.2Xx9ModulationModeread-onlycurrent
txExcCmdRfSlope
OBJECT-TYPE
Corrects a slope in amplitude spectrum. Not for band 2.
1.3.6.1.4.1.2566.127.1.2.216.3.1.2.2.1.3Integer32 (-20..20)read-writecurrent
txExcCmdOutputAttenuation
OBJECT-TYPE
Used to attenuate the RF level of exciter up to 9dB: dB0(1) - 0 dB dB3(2) - 3 dB dB6(3) - 6 dB dB9(4) - 9 dB
1.3.6.1.4.1.2566.127.1.2.216.3.1.2.2.1.4INTEGER {dB0(1), dB3(2), dB6(3), dB9(4)}read-writecurrent
txExcCmdLoopControl
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.2.2.1.5INTEGER {limited(1), full(2)}read-writecurrent
txExcCmdOperationMode
OBJECT-TYPE
Switch used to switch the exciter on and off. Directly affects the output of the exciter. Use this command only in exciter-only configuration (no TxControl available). misuse might lead to hardware damage. For changing the operationMode of an exciter within a transmitter, always prefer txTransCmdOperationMode over txExcCmdOperationMode.
1.3.6.1.4.1.2566.127.1.2.216.3.1.2.2.1.6SwitchOnOffread-writecurrent
txExciterStateTable
OBJECT-TYPE
Exciter status.
1.3.6.1.4.1.2566.127.1.2.216.3.1.2.3not-accessiblecurrent
txExciterStateEntry
OBJECT-TYPE
An entry in the txExciterStateTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.2.3.1not-accessiblecurrent
txExcStOperationOn
OBJECT-TYPE
State of exciter operation mode: true(1) - on false(2) - off
1.3.6.1.4.1.2566.127.1.2.216.3.1.2.3.1.1TruthValueread-onlycurrent
txInputInterfaces
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.3.1.3
txInpIfNotificationTable
OBJECT-TYPE
The context information/configuration for the input interface status notifications.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.1not-accessiblecurrent
txInpIfNotificationEntry
OBJECT-TYPE
An entry in the txInpIfNotificationTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.1.1not-accessiblecurrent
txInpIfNotificationTxIdx
OBJECT-TYPE
The transmitter index.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.1.1.1IndexTransmitternot-accessiblecurrent
txInpIfNotificationExcIdx
OBJECT-TYPE
This index distinguishes the exiters. Necessary if you have dual drive transmitters.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.1.1.2IndexABnot-accessiblecurrent
txInpIfNotificationInputIdx
OBJECT-TYPE
Input index. For txInpIfState(4000) it names the logical input, for the others the physical input.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.1.1.3INTEGER {input1(1), input2(2)}not-accessiblecurrent
txInpIfNotificationIdx
OBJECT-TYPE
The notification number as below rsXx9TxNotifications. This is a helper column and therefore not-accessible.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.1.1.4Unsigned32 (3000..3021)not-accessiblecurrent
txInpIfNotificationName
OBJECT-TYPE
The notification number as an enumeration. The enumeration correlates with the notifications under rsXx9TxNotifications.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.1.1.5INTEGER {txInpIfLogState(3000), txInpIfLogInfoPacket(3001), txInpIfLogPacketLength(3002), txInpIfIpState(3003), txInpIfIpInfoPacket(3004), txInpIfIpPacketLength(3005), txInpIfTsState(3006), txInpIfTsInfoPacket(3007), txInpIfTsPacketLength(3008), txInpIfLogDatarateBufferUnderrun(3009), txInpIfLogDatarateBufferOverflow(3010), txInpIfSatInputState(3011), txInpIfSatInfoPacket(3012), txInpIfSatPacketLength(3013), txInpIfSatTransponderLocked(3014), txInpIfSatIpOutput(3015), txInpIfSatReceiverState(3016), txInpIfSatBtsStatus(3017), txInpIfSatDriftStatus(3018), txInpIfSatLinkMarginStatus(3019), txInpIfSatCarrierNoiseStatus(3020), txInpIfSatStreamTsIdMatch(3021)}read-onlycurrent
txInpIfNotificationMask
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.1.1.6NotificationMaskread-writecurrent
txInpIfNotificationPriority
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.1.1.7NotificationPriorityread-writecurrent
txInpIfNotificationState
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.1.1.8NotificationStateread-onlycurrent
txInpGeneralSetupTable
OBJECT-TYPE
General input settings.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.2not-accessiblecurrent
txInpGeneralSetupEntry
OBJECT-TYPE
An entry in the txInpGeneralSetupTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.2.1not-accessiblecurrent
txInpGsInputSource
OBJECT-TYPE
Determines which physical input interface is used for the logical input. Only available physical input interfaces may be chosen. If the physical input is not available or a required option key is missing, the chosen phyiscal input interface may not work. This is especially important for devices with a very limited number of inputs (e.g. TLx Basic Variant).
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.2.1.1INTEGER {ts1(1), ts2(2), ip1(3), ip2(4), rx(5), eti1(6), eti2(7), sat1(8), sat2(9), edi1(10), edi2(11)}read-writecurrent
txInpGsMultiplexName
OBJECT-TYPE
An arbitrary user defined name for the multiplex in input stream.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.2.1.2SnmpAdminStringread-writecurrent
txInpMonitorTable
OBJECT-TYPE
Input monitor settings.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.3not-accessiblecurrent
txInpMonitorEntry
OBJECT-TYPE
An entry in the txInpMonitorTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.3.1not-accessiblecurrent
txInpMonitorOut
OBJECT-TYPE
Selects an input signal to relay to the monitor out connector (X22). undefined(1) must not be set. The admissible choices are determined by the installed input interface and option keys. testSignal(6) is not allowed for ISDB-T transmitters.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.3.1.1INTEGER {undefined(1), off(2), activeInput(3), logicalInput1(4), logicalInput2(5), testSignal(6), fctZeroPulse(7)}read-writecurrent
txInputIpFeedTable
OBJECT-TYPE
IP feed parameters.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.4not-accessiblecurrent
txInputIpFeedEntry
OBJECT-TYPE
An entry in the txInputIpFeedTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.4.1not-accessiblecurrent
txIpFeedDatarate
OBJECT-TYPE
Indicates the total data rate (gross data rate) on the IP feed.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.4.1.1Unsigned32read-onlycurrent
txIpFeedConnector
OBJECT-TYPE
Used to define the physical network interface to which the logical IP stream is bound. Normally, the TS LAN 1 socket (X30) is coupled to IP stream 1 and the TS LAN 2 socket (X31) to IP stream 2. This allows you to use multiple redundant servers that can be selected automatically using the automatic input signal switchover. However, it is also possible to feed several multicast streams via the same physical Ethernet socket. In this case, too, the automatic input signal switchover function can toggle automatically between two data streams.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.4.1.2INTEGER {tsLan1(1), tsLan2(2)}read-writecurrent
txIpFeedStreamingMode
OBJECT-TYPE
Determines the streaming mode.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.4.1.3INTEGER {uniCast(1), multiCast(2)}read-writecurrent
txIpFeedStreamAddressType
OBJECT-TYPE
Specifies the accepted internet address type for ipStreamAddress.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.4.1.4InetAddressTyperead-onlycurrent
txIpFeedStreamAddress
OBJECT-TYPE
If ipStreamMode is unicast(1) this object is read-only and shows the IP address on the physical connector. If ipStreamMode is multicast(2) this object is read-write for configuration of the multicast source the IP address.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.4.1.5InetAddressread-writecurrent
txIpFeedStreamPort
OBJECT-TYPE
The port of the logical input stream.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.4.1.6Unsigned32 (1..65535)read-writecurrent
txIpFeedStreamProtocol
OBJECT-TYPE
The protocol of the logical input stream.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.4.1.7INTEGER {auto(1), udp(2), rtp(3)}read-writecurrent
txIpFeedPacketsTotal
OBJECT-TYPE
Total count of all received TSoverIP packets.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.4.1.8Counter64read-onlycurrent
txIpFeedPacketsMissing
OBJECT-TYPE
Count of all missing packets.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.4.1.9Counter64read-onlycurrent
txIpFeedPacketsFixed
OBJECT-TYPE
Count of all packets, which were reconstructed via FEC.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.4.1.10Counter64read-onlycurrent
txIpFeedPacketsDuplicate
OBJECT-TYPE
Cound of packets, which were received multiple times.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.4.1.11Counter64read-onlycurrent
txIpFeedPacketsReordered
OBJECT-TYPE
Count of packets, which had to be sorted into the correct order.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.4.1.12Counter64read-onlycurrent
txIpFeedPacketsOutOfRange
OBJECT-TYPE
Cound of all packets, which were not in the current processing window.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.4.1.13Counter64read-onlycurrent
txIpFeedLinkStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.4.1.14INTEGER {undefined(1), notPresent(2), present(3)}read-onlycurrent
txInputTsFeedTable
OBJECT-TYPE
TS feed parameters.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.5not-accessiblecurrent
txInputTsFeedEntry
OBJECT-TYPE
An entry in the txInputTsFeedTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.5.1not-accessiblecurrent
txTsFeedBruttoDataRate
OBJECT-TYPE
Gross data rate of the TS stream.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.5.1.1Unsigned32read-onlycurrent
txTsFeedNettoDataRate
OBJECT-TYPE
Net data rate (without stuffing bytes) of the TS stream. This value is available only when txSfnTimeSyncSFN is off(2).
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.5.1.2Unsigned32read-onlycurrent
txTsFeedPacketLength
OBJECT-TYPE
Dectected packet length of TS stream.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.5.1.3Unsigned32read-onlycurrent
txTsFeedType
OBJECT-TYPE
Used to set the data format for the data streams at X20 and X21. auto(1) - Data format is detected automatically asi(2) - Manual setting for an ASI transport stream smpte(3) - Manual setting for an SMPTE transport stream
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.5.1.4INTEGER {auto(1), asi(2), smpte(3)}read-writecurrent
txInputSatFeed
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6
txInputSatFeedTunerTable
OBJECT-TYPE
SAT tuner parameters.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.1not-accessiblecurrent
txInputSatFeedTunerEntry
OBJECT-TYPE
An entry in the txInputSatFeedTunerTable
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.1.1not-accessiblecurrent
txSatTunerTransponderFreq
OBJECT-TYPE
Description. range: 950000000 - 12750000000 [Hz] (equals 950 MHz - 12.75 GHz)
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.1.1.1Counter64read-onlycurrent
txSatTunerSignalType
OBJECT-TYPE
Expected signal type that shall be received.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.1.1.2SatSignalTyperead-writecurrent
txSatTunerSymbolRate
OBJECT-TYPE
Expected symbol rate of the signal that shall be received in kSymb/s. If 0 is entered here, the DVB-S/S2 receiver will perform a Blind Search and try to detected all signal parameters automatically.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.1.1.3Unsigned32 (0..50000000)read-writecurrent
txSatTunerModulation
OBJECT-TYPE
The detected modulation of the received signal
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.1.1.4INTEGER {undefinedMode(1), qpsk(2), psk8(3), psk16(4), psk32(5)}read-onlycurrent
txSatTunerCoderate
OBJECT-TYPE
The current FEC code rate of the received signal
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.1.1.5SnmpAdminString (SIZE(0..16))read-onlycurrent
txSatTunerSignalStandard
OBJECT-TYPE
The detected signal standard of the received signal
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.1.1.6SatSignalTyperead-onlycurrent
txSatTunerRxPower
OBJECT-TYPE
The current received power in 0.01 dBm
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.1.1.7Integer32 (-9000..0)read-onlycurrent
txSatTunerMeasuredTsDatarate
OBJECT-TYPE
The measured data rate of the transport stream in Bit/s
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.1.1.8Unsigned32read-onlycurrent
txSatTunerBitErrorRate
OBJECT-TYPE
The current bit error rate.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.1.1.9Unsigned32read-onlycurrent
txSatTunerCarrierNoiseRatio
OBJECT-TYPE
The current carrier-to-noise ratio in 0.01 dB.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.1.1.10Integer32 (-300..20000)read-onlycurrent
txSatTunerTsSymbolRate
OBJECT-TYPE
The current symbol rate of the received signal in Symb/s (including the SR offset)
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.1.1.11Unsigned32 (0..50000000)read-onlycurrent
txSatTunerIntermediateFreq
OBJECT-TYPE
The intermediate frequency is calculated from the LNB Frequency and the selected Transponder Frequency.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.1.1.12Counter64read-onlycurrent
txSatTunerLinkMargin
OBJECT-TYPE
The difference between the receiver's sensitivity (i.e., the received power at which the receiver will stop working) and the actual received power.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.1.1.13Integer32read-onlycurrent
txSatTunerLinkMarginWarnLimit
OBJECT-TYPE
Indicates the threshold for a link margin warning.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.1.1.14Integer32 (0..2000)read-writecurrent
txSatTunerLinkMarginFaultLimit
OBJECT-TYPE
Indicates the threshold for a link margin fault.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.1.1.15Integer32 (0..2000)read-writecurrent
txSatTunerCarrierNoiseWarnLimit
OBJECT-TYPE
When the C/N drops below this limit a warning is indicated.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.1.1.16Integer32 (0..2000)read-writecurrent
txSatTunerCarrierNoiseFaultLimit
OBJECT-TYPE
When the C/N drops below this limit a fault is indicated.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.1.1.17Integer32 (0..2000)read-writecurrent
txSatTunerTransponderFreqUpper32
OBJECT-TYPE
Description. these are the upper 32bits of a 64bit value range: 950000000 - 12750000000 [Hz] (equals 950 MHz - 12.75 GHz)
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.1.1.18Unsigned32read-writecurrent
txSatTunerTransponderFreqLower32
OBJECT-TYPE
Description. these are the lower 32bits of a 64bit value range: 950000000 - 12750000000 [Hz] (equals 950 MHz - 12.75 GHz)
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.1.1.19Unsigned32read-writecurrent
txInputSatFeedLnbTable
OBJECT-TYPE
SAT LNB parameters.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.2not-accessiblecurrent
txInputSatFeedLnbEntry
OBJECT-TYPE
An entry in the txInputSatFeedLnbTable
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.2.1not-accessiblecurrent
txSatLnbPolarization
OBJECT-TYPE
The polarisation that shall be selected by the LNB. If horizontal polarisation is selected, the LNB supply voltage will be increased from 13V/14V to 18V/19V. This parameter has no effect if the LNB Voltage is set to Off.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.2.1.1INTEGER {horizontal(1), vertical(2)}read-writecurrent
txSatLnbFreqLowBand
OBJECT-TYPE
Frequency of the local oscillator of the LNB in the low band in MHz (Ku-Band only). The software calculates if the selected transponder frequency falls into the low or high band of the LNB. range: 9300000000 - 10200000000 [Hz] (equals 9.3GHz - 10.2 GHz)
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.2.1.2Counter64read-onlycurrent
txSatLnbFreqHighBand
OBJECT-TYPE
Frequency of the local oscillator of the LNB in the high band in MHz (Ku-Band only). The software calculates if the selected transponder frequency falls into the low or high band of the LNB. If the high band shall be used a 22kHz tone will be automatically transmitted to the LNB. range: 10200000000 - 11000000000 [Hz] (equals 10.2GHz - 11.00 GHz)
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.2.1.3Counter64read-onlycurrent
txSatLnbVoltage
OBJECT-TYPE
Selects the LNB supply voltage. The voltage supplied to the LNB can be increased by about 1V to cope with losses due to the resistance of the RF cable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.2.1.4INTEGER {off(1), vert13VandHori18V(2), vert14VandHori19V(3)}read-writecurrent
txSatLnbBand
OBJECT-TYPE
This parameter determines how the selected IF of the DVB-S/S2 Tuner is calculated. - In C-Band Mode only one LNB frequency is used and the 22kHz tonecan be switched on or off manually. - In Ku-Band Mode two LNB frequencies (high and low) have to be entered. The device automatically selects the matching frequency band and switches the 22kHz tone on if the high band should be selected. - In Manual Mode you can directly enter the intermediate frequency (IF) which the Tuner shall attempt to receive.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.2.1.5INTEGER {kuBand(1), cBand(2), manual(3)}read-writecurrent
txSatLnbFreqCBand
OBJECT-TYPE
Frequency of the local oscillator of the LNB in Hz (C-Band only). range: 3 000 000 000 - 6 000 000 000 [Hz] (equals 3GHz - 6.00 GHz)
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.2.1.6Counter64read-onlycurrent
txSatLnb22kHzSignal
OBJECT-TYPE
Manually controls the 22kHz tone transmitted to the LNB (only relevant in LNB Modes C-Band and Manual).
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.2.1.7SwitchOnOffread-writecurrent
txSatLnbDriftWarnLimit
OBJECT-TYPE
When the difference between receive frequency and transponder frequency rises above this limit a warning is indicated.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.2.1.8Unsigned32 (0..1000000)read-writecurrent
txSatLnbDrift
OBJECT-TYPE
Indicates a warning when the difference between transponder frequency and receive frequency (tuner frequency) is too high.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.2.1.9Integer32read-onlycurrent
txSatLnbFreqLowBandUpper32
OBJECT-TYPE
Frequency of the local oscillator of the LNB in the low band in MHz (Ku-Band only). The software calculates if the selected transponder frequency falls into the low or high band of the LNB. these are the upper 32bits of a 64bit value range: 9300000000 - 10200000000 [Hz] (equals 9.3GHz - 10.2 GHz)
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.2.1.10Unsigned32read-writecurrent
txSatLnbFreqLowBandLower32
OBJECT-TYPE
Frequency of the local oscillator of the LNB in the low band in MHz (Ku-Band only). The software calculates if the selected transponder frequency falls into the low or high band of the LNB. these are the lower 32bits of a 64bit value range: 9300000000 - 10200000000 [Hz] (equals 9.3GHz - 10.2 GHz)
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.2.1.11Unsigned32read-writecurrent
txSatLnbFreqHighBandUpper32
OBJECT-TYPE
Frequency of the local oscillator of the LNB in the high band in MHz (Ku-Band only). The software calculates if the selected transponder frequency falls into the low or high band of the LNB. If the high band shall be used a 22kHz tone will be automatically transmitted to the LNB. these are the upper 32bits of a 64bit value range: 10200000000 - 11000000000 [Hz] (equals 10.2GHz - 11.00 GHz)
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.2.1.12Unsigned32read-writecurrent
txSatLnbFreqHighBandLower32
OBJECT-TYPE
Frequency of the local oscillator of the LNB in the high band in MHz (Ku-Band only). The software calculates if the selected transponder frequency falls into the low or high band of the LNB. If the high band shall be used a 22kHz tone will be automatically transmitted to the LNB. these are the lower 32bits of a 64bit value range: 10200000000 - 11000000000 [Hz] (equals 10.2GHz - 11.00 GHz)
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.2.1.13Unsigned32read-writecurrent
txSatLnbFreqCBandUpper32
OBJECT-TYPE
Frequency of the local oscillator of the LNB in Hz (C-Band only). these are the upper 32bits of a 64bit value range: 3 000 000 000 - 6 000 000 000 [Hz] (equals 3GHz - 6.00 GHz)
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.2.1.14Unsigned32read-writecurrent
txSatLnbFreqCBandLower32
OBJECT-TYPE
Frequency of the local oscillator of the LNB in Hz (C-Band only). these are the lower 32bits of a 64bit value range: 3 000 000 000 - 6 000 000 000 [Hz] (equals 3GHz - 6.00 GHz)
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.2.1.15Unsigned32read-writecurrent
txInputSatFeedCamTable
OBJECT-TYPE
SAT CAM parameters.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.3not-accessiblecurrent
txInputSatFeedCamEntry
OBJECT-TYPE
An entry in the txInputSatFeedCamTable
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.3.1not-accessiblecurrent
txSatCamInserted
OBJECT-TYPE
Indicates whether a CAM is installed. CAM=Conditional Access Module
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.3.1.1TruthValueread-onlycurrent
txSatCamStatus
OBJECT-TYPE
Status of the Condtional Access Module.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.3.1.2INTEGER {off(1), on(2), noModule(3), noSignal(4), noKey(5), needMMI(6)}read-onlycurrent
txSatCamManufacturerName
OBJECT-TYPE
The manufacturer of the CA module.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.3.1.3SnmpAdminString (SIZE(0..64))read-onlycurrent
txSatCamModuleName
OBJECT-TYPE
The name of the CA module.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.3.1.4SnmpAdminString (SIZE(0..64))read-onlycurrent
txSatCamTsInput
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.3.1.5TruthValueread-onlycurrent
txSatCamTsOutput
OBJECT-TYPE
Indicates whether a transport stream has been detected at the output of the conditional access module.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.3.1.6TruthValueread-onlycurrent
txSatCamConfigurationMode
OBJECT-TYPE
Selects the operation mode of CAM 1/2. You can use the internal BISS-E core or an additional CA Module in Common Interface Slot 1/2 for descrambling a Transport Stream.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.3.1.7INTEGER {undefinedCam(1), off(2), ci(3), biss(4)}read-writecurrent
txSatCamBissMode
OBJECT-TYPE
Operation Mode of the BISS core.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.3.1.8INTEGER {undefinedMode(1), bissE(2), biss1(3)}read-writecurrent
txSatCamBissInjectedId
OBJECT-TYPE
Enter the default 14 character Injected Identifier used for BISS-E here.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.3.1.9SnmpAdminString (SIZE(0..64))read-writecurrent
txSatCamBissEncryptedSession
OBJECT-TYPE
Enter the default 16 character Encrypted Session Word used for BISS-E here.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.3.1.10SnmpAdminString (SIZE(0..64))read-writecurrent
txSatCamBissClearSession
OBJECT-TYPE
Enter the default 12 character Clear Session Word used for BISS-1 here.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.3.1.11SnmpAdminString (SIZE(0..64))read-writecurrent
txSatCamScInserted
OBJECT-TYPE
Indicates whether a Smartcard is installed.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.3.1.12TruthValueread-onlycurrent
txSatCamScManufacturerName
OBJECT-TYPE
Shows the manufacturer name of the Smartcard.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.3.1.13SnmpAdminString (SIZE(0..64))read-onlycurrent
txSatCamScExpirationDate
OBJECT-TYPE
Indicates the expiraton date of Smartcard.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.3.1.14DateAndTimeread-onlycurrent
txSatCamResetMode
OBJECT-TYPE
Indicates whether the conditional access module is reset automatically in case of malfunction.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.3.1.15INTEGER {manual(1), auto(2)}read-writecurrent
txSatCamReset
OBJECT-TYPE
Resets the conditional access module manually.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.3.1.16Triggerread-writecurrent
txInputSatFeedIpOutputTable
OBJECT-TYPE
SAT IP output parameters.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.4not-accessiblecurrent
txInputSatFeedIpOutputEntry
OBJECT-TYPE
An entry in the txInputSatFeedIpOutputTable
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.4.1not-accessiblecurrent
txSatIpOutMulticastAddrType
OBJECT-TYPE
Specifies the accepted internet address type for txSatIpOutMulticastAddr.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.4.1.1InetAddressTyperead-onlycurrent
txSatIpOutPort
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.4.1.2Unsigned32 (0..65535)read-writecurrent
txSatIpOutMulticastAddr
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.4.1.3InetAddressread-writecurrent
txSatIpOutFecRow
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.4.1.4Unsigned32 (4..10)read-writecurrent
txSatIpOutFecCol
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.4.1.5Unsigned32 (4..10)read-writecurrent
txSatIpOutLocalIpAddrType
OBJECT-TYPE
Specifies the accepted internet address type for txSatIpOutLocalIpAddrType.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.4.1.6InetAddressTyperead-onlycurrent
txSatIpOutLocalIpAddr
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.4.1.7InetAddressread-writecurrent
txSatIpOutLocalNetmaskAddrType
OBJECT-TYPE
Specifies the accepted internet address type for txSatIpOutLocalNetmask.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.4.1.8InetAddressTyperead-onlycurrent
txSatIpOutLocalNetmask
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.4.1.9InetAddressread-writecurrent
txSatIpOutMacAddr
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.4.1.10SnmpAdminString (SIZE(0..17))read-onlycurrent
txInputSatFeedInputServiceTable
OBJECT-TYPE
SAT input service parameters.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.5not-accessiblecurrent
txInputSatFeedInputServiceEntry
OBJECT-TYPE
An entry in the txInputSatFeedInputServiceTable
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.5.1not-accessiblecurrent
txSatFeedServiceIdx
OBJECT-TYPE
The input service index.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.5.1.1Integer32 (1..32)not-accessiblecurrent
txSatFeedInputServiceName
OBJECT-TYPE
The name of the service (from SDT)
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.5.1.2SnmpAdminString (SIZE(0..64))read-onlycurrent
txSatFeedInputServiceID
OBJECT-TYPE
The Service ID (from PAT)
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.5.1.3Unsigned32 (0..65535)read-onlycurrent
txSatFeedInputServiceType
OBJECT-TYPE
The service type as decimal value (from SDT)
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.5.1.4SnmpAdminString (SIZE(0..16))read-onlycurrent
txSatFeedInputServiceElementaryStreams
OBJECT-TYPE
The number of elementary streams (ES) in this service (from PMT)
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.5.1.5Unsigned32read-onlycurrent
txSatFeedInputServiceDecryption
OBJECT-TYPE
The decryption is enabled
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.5.1.6SwitchOnOffread-writecurrent
txSatFeedInputServiceEncrypted
OBJECT-TYPE
is true(1) if the service is encrypted (from SDT)
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.5.1.7TruthValueread-onlycurrent
txSatFeedInputServiceDecryptionState
OBJECT-TYPE
The status of the decryption process
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.5.1.8INTEGER {undefinedStatus(1), no(2), error(3), ok(5)}read-onlycurrent
txSatFeedInputServiceDecryptedAt
OBJECT-TYPE
obsolete
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.5.1.9SnmpAdminStringread-onlyobsolete
txSatFeedInputServicePmtPid
OBJECT-TYPE
Indicates the ID of the service from the program map table (PMT).
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.5.1.10Unsigned32 (0..65536)read-onlycurrent
txInputSatFeedGeneralTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.6not-accessiblecurrent
txInputSatFeedGeneralEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.6.1not-accessiblecurrent
txSatGeneralAsiOutput
OBJECT-TYPE
Indicates which of the two SAT receiver streams is switched to the ASI output (X25) of SAT receiver board. The setting can be changed here. This parameter is available if at least one logical input is configured as SAT-input.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.6.1.1INTEGER {off(1), sat1(2), sat2(3)}read-writecurrent
txInputSatFeedDecryptionServiceTable
OBJECT-TYPE
SAT input service decryption parameters.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.7not-accessiblecurrent
txInputSatFeedDecryptionServiceEntry
OBJECT-TYPE
An entry in the txInputSatFeedDecryptionServiceTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.7.1not-accessiblecurrent
txSatFeedDecryptionServiceIdx
OBJECT-TYPE
The input service decryption index.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.7.1.1Integer32 (1..16)not-accessiblecurrent
txSatFeedDecryptionServiceID
OBJECT-TYPE
Enable the decryption for this services
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.7.1.2Unsigned32 (0..65535)read-writecurrent
txInputSatFeedBtsTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.8not-accessiblecurrent
txInputSatFeedBtsEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.8.1not-accessiblecurrent
txSatBtsDecompEnable
OBJECT-TYPE
obsolete
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.8.1.1TruthValueread-onlyobsolete
txSatBtsRegionalization
OBJECT-TYPE
obsolete. replaced by isdbtNitRestampingTable
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.8.1.2SwitchOnOffread-writeobsolete
txSatBtsPliTablePid
OBJECT-TYPE
Indicates the packet id which contains the PLI table in the DVB-S/S2 stream. The setting can be changed here.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.8.1.3Unsigned32 (0..8191)read-writecurrent
txSatBtsNullPacketLaPid
OBJECT-TYPE
Indicates the packet id which contains the payload for layer A. The setting can be changed here.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.8.1.4Unsigned32 (0..8191)read-writecurrent
txSatBtsNullPacketLbPid
OBJECT-TYPE
Indicates the packet id which contains the payload for layer B. The setting can be changed here.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.8.1.5Unsigned32 (0..8191)read-writecurrent
txSatBtsNullPacketLcPid
OBJECT-TYPE
Indicates the packet id which contains the payload for layer C. The setting can be changed here.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.8.1.6Unsigned32 (0..8191)read-writecurrent
txInputSatFeedExtrasTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.9not-accessiblecurrent
txInputSatFeedExtrasEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.9.1not-accessiblecurrent
txSatMultiStreamStatus
OBJECT-TYPE
Indicates, whether the sat receiver is locked to the stream with the 'Used Stream ID'.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.9.1.1INTEGER {notFound(1), available(2)}read-onlycurrent
txSatMultiStreamUsedStreamId
OBJECT-TYPE
Indicates which datastream shall be used. The stream id can be changed here.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.9.1.2Unsigned32 (0..255)read-writecurrent
txSatPlScrambling
OBJECT-TYPE
Indicates the method how the polynomial to descramble the datastream is calculated. The setting can be changed here. Physical Layer Scrambling is disabled when PL Scrambling is set to 'Gold' and Code is set to '0'
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.9.1.3INTEGER {gold(1), root(2)}read-writecurrent
txSatPlsCode
OBJECT-TYPE
Indicates the decryption code. This code and the method how the polynomial is calculated must be identical to the settings of scrambler in playout. Up to three different codes can be used. If Loop is enabled all codes will be checked automatically. To avoid copying the decryption code always the value -1 is displayed.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.9.1.4Integer32 (-1..262143)read-writecurrent
txSatPlsCode2
OBJECT-TYPE
Indicates the decryption code. This code and the method how the polynomial is calculated must be identical to the settings of scrambler in playout. Up to three different codes can be used. If Loop is enabled all codes will be checked automatically. To avoid copying the decryption code always the value -1 is displayed.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.9.1.5Integer32 (-1..262143)read-writecurrent
txSatPlsCode3
OBJECT-TYPE
Indicates the decryption code. This code and the method how the polynomial is calculated must be identical to the settings of scrambler in playout. Up to three different codes can be used. If Loop is enabled all codes will be checked automatically. To avoid copying the decryption code always the value -1 is displayed.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.9.1.6Integer32 (-1..262143)read-writecurrent
txSatCodeLoop
OBJECT-TYPE
Indicates whether the automatic pls code scanning is active. Up to three different pls codes can be used to decode the transport stream.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.9.1.10SwitchOnOffread-writecurrent
txSatPlsSelect
OBJECT-TYPE
When automatic loop is disabled one of up to three stored pls codes can be selected manually.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.9.1.11INTEGER {code1(1), code2(2), code3(3)}read-writecurrent
txSatPlsActive
OBJECT-TYPE
Indicates the used PLS code.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.9.1.12INTEGER {code1(1), code2(2), code3(3)}read-onlycurrent
txSatStreamCurrentTsId
OBJECT-TYPE
Indicates the ID of currently used transport stream. In multistream configurations the multistream number defines the active transport stream.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.9.1.13Unsigned32read-onlycurrent
txSatStreamExpectedTsId
OBJECT-TYPE
Indicates which transport stream is expected. Changing the transport stream will lead to a warning. Setting the expected TS ID to zero suppresses a warning.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.6.9.1.14Unsigned32read-writecurrent
txInputExgineStateTable
OBJECT-TYPE
Exgine device status information.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.7not-accessiblecurrent
txInputExgineStateEntry
OBJECT-TYPE
An entry in the txInputExgineStateTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.7.1not-accessiblecurrent
txExgineMode
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.7.1.1INTEGER {undefined(1), fmOnly(2), hybrid(3), extendedHybrid(4), fullDigital(5)}read-onlycurrent
txExgineStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.7.1.2NotificationStateread-onlycurrent
txExgineMute
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.7.1.3NotificationStateread-onlycurrent
txExgineSyncInputSrc
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.7.1.4INTEGER {undefined(1), internalGps(2), externalReference(3)}read-onlycurrent
txExgineSyncInputStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.7.1.5NotificationStateread-onlycurrent
txExgineMpxInput
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.7.1.6NotificationStateread-onlycurrent
txExgineE2xInput
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.7.1.7NotificationStateread-onlycurrent
txExgineSupply1Status
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.7.1.8NotificationStateread-onlycurrent
txExgineSupply2Status
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.3.7.1.9NotificationStateread-onlycurrent
txInputAutomatic
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.3.1.4
txInpAutoNotificationTable
OBJECT-TYPE
The context information/configuration for the input automatic status notifications.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.1not-accessiblecurrent
txInpAutoNotificationEntry
OBJECT-TYPE
An entry in the txInpAutoNotificationTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.1.1not-accessiblecurrent
txInpAutoNotificationTxIdx
OBJECT-TYPE
The transmitter index.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.1.1.1IndexTransmitternot-accessiblecurrent
txInpAutoNotificationExcIdx
OBJECT-TYPE
This index distinguishes the exiters. Necessary if you have dual drive transmitters.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.1.1.2IndexABnot-accessiblecurrent
txInpAutoNotificationIdx
OBJECT-TYPE
The notification number as below rsXx9TxNotifications. This is a helper column and therefore not-accessible.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.1.1.3Unsigned32 (4000..4001)not-accessiblecurrent
txInpAutoNotificationName
OBJECT-TYPE
The notification number as an enumeration. The enumeration correlates with the notifications under rsXx9TxNotifications.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.1.1.4INTEGER {txInpAuto1Active(4000), txInpAutoState(4001)}read-onlycurrent
txInpAutoNotificationMask
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.1.1.5NotificationMaskread-writecurrent
txInpAutoNotificationPriority
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.1.1.6NotificationPriorityread-writecurrent
txInpAutoNotificationState
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.1.1.7NotificationStateread-onlycurrent
txInpAutoConfigurationTable
OBJECT-TYPE
Input automatic settings.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.2not-accessiblecurrent
txInpAutoConfigurationEntry
OBJECT-TYPE
An entry in the txInpAutoConfigurationTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.2.1not-accessiblecurrent
txInpAutoOperationMode
OBJECT-TYPE
Switches the input automatic on or off.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.2.1.1SwitchOnOffread-writecurrent
txInpAutoPreferredInput
OBJECT-TYPE
Selects the preferred input for the input automatic. Not for FM.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.2.1.2INTEGER {input1(1), noPreference(2), input2(3)}read-writecurrent
txInpAutoActiveInput
OBJECT-TYPE
Used to select the active input if the automatic input signal switchover function is switched off. If the automatic switchover function is switched on, the input can only be switched over using this switch if txInpAutoPreferredInput is set to noPreference(3) or a switchover to the standby input has taken place. (The latter not for FM.)
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.2.1.3INTEGER {input1(2), input2(3)}read-writecurrent
txInpAutoDirection
OBJECT-TYPE
Used to set the operational response of the automatic switchover function: toReserveAndBack(1) - Following successful switchover to the standby input, the automatic switchover function can also switch back automatically if the signal at the standby input fails. toReserveOnly(2) - The automatic switchover function switches over once from the preferred input to the standby input and then assumes the 'not ready' state. Switching the active input over manually to the preferred input reactivates the automatic switchover function.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.2.1.4INTEGER {toReserveAndBack(1), toReserveOnly(2)}read-writecurrent
txInpAutoGuardTimeToReserve
OBJECT-TYPE
Used to set a guard time which must elapse before the automatic switchover function switches over to the standby input if the input signal at the preferred input fails. The set guard time has no effect if seamless switching is possible. In this case, the switchover always takes place immediately without interruption (i.e. seamlessly).
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.2.1.5Unsigned32 (0..100)read-writecurrent
txInpAutoGuardTimeBack
OBJECT-TYPE
Used to set a guard time which must elapse before the automatic switchover function switches back to the preferred input if the input signal at the standby input fails. If seamless switching is possible, switchover always takes place immediately without interruption regardless of the set guard time. If toReserveOnly(1) was selected for txInpAutoDirection, the set guard time has no effect.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.2.1.6Unsigned32 (0..100)read-writecurrent
txInpAutoSeamlessPossible
OBJECT-TYPE
Indicates whether seamless switching of the input signal is possible. false(2) (not possible) always appears if only one input signal is supplied or in cases where two different data streams are present at the two inputs. If seamless switching is possible, it always takes place immediately when required, regardless of whether txInpAutoGuardTimeToReserve or txInpAutoGuardTimeBack has been set.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.2.1.7TruthValueread-onlycurrent
txInpAutoSeamlessOpMode
OBJECT-TYPE
Activates/deactivates seamless switchover of the input signal.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.2.1.8SwitchOnOffread-writecurrent
txInpAutoMaxDelayInput1To2
OBJECT-TYPE
Absolute maximum delay between logical input 1 and logical input 2.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.2.1.9Integer32 (0..2000)read-writeobsolete
txInpAutoDelayInput1To2
OBJECT-TYPE
The current delay between logical input 1 and logical input 2.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.2.1.10Integer32read-onlycurrent
txInpAutoInputFailDelay
OBJECT-TYPE
The length of the checkout time which must expire after detection of an input signal fault before the exciter displays a fault. If a short checkout time is set, the system can quickly switch over to a standby exciter if all input signals of the exciter fail. If a long checkout time is set, there will be enough time in the event of a fault to switch to an alternative feed path so that the exciter is prevented from switching over to a redundancy component. Not for band II.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.2.1.11Unsigned32 (0..600)read-writecurrent
txInpAutoIfReseveFails
OBJECT-TYPE
Determine whether the signal at the standby input is to be monitored. If the transmitter is operated with only one input signal or the standby input is connected only temporarily, nothing(1) must be selected to not generate a warning. If two redundant input signals are normally supplied to the transmitter, warn(2) must be selected.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.2.1.12INTEGER {nothing(1), warn(2)}read-writecurrent
txInpAutoForceExciterChangeover
OBJECT-TYPE
Determine whether switchover to another redundant exciter is to take place if the input signal fails. This function is available for all redundancy systems (dual drive, backup exciter and n+1). on(1) - an exciter fault is signaled to the higher-level redundancy control unit which decides whether to switch over to another exciter or transmitter. off(2) - no switchover takes place.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.2.1.13SwitchOnOffread-writecurrent
txInpAutoMuteOnInputFail
OBJECT-TYPE
Determine whether the output signal of the exciter is to be shut down if the input signal of all available inputs fails, or whether 'null packets' are to be sent. This switch is available in multiple-frequency networks (MFN) only. In single-frequency networks (SFN) and using TV standard ISDB-T, the exciter will always mute if no decodable input signal is fed. Not for FM.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.2.1.14SwitchOnOffread-writecurrent
txInpAutoDetectLostPackets
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.2.1.15SwitchOnOffread-writecurrent
txInpAutoTransparentTs
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.2.1.16SwitchOnOffread-writecurrent
txInpAutoFailDetection
OBJECT-TYPE
Indicates how quick the exciter input reacts on missing data packets. normal(1): bursts in transport stream are processed without error indication (recommended for IP feed). fast(2): this setting decreases the reaction time in case of a loss of input signal. It can be used when a continous datastream at the exciter input is guaranteed.
1.3.6.1.4.1.2566.127.1.2.216.3.1.4.2.1.17INTEGER {normal(1), fast(2)}read-writecurrent
txFrequencyRegulation
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.3.1.5
txFrqRegNotificationTable
OBJECT-TYPE
The context information/configuration for the SFN status notifications.
1.3.6.1.4.1.2566.127.1.2.216.3.1.5.1not-accessiblecurrent
txFrqRegNotificationEntry
OBJECT-TYPE
An entry in the txSfnNotificationTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.5.1.1not-accessiblecurrent
txFrqRegNotificationTxIdx
OBJECT-TYPE
The transmitter index.
1.3.6.1.4.1.2566.127.1.2.216.3.1.5.1.1.1IndexTransmitternot-accessiblecurrent
txFrqRegNotificationExcIdx
OBJECT-TYPE
This index distinguishes the exiters. Necessary if you have dual drive transmitters.
1.3.6.1.4.1.2566.127.1.2.216.3.1.5.1.1.2IndexABnot-accessiblecurrent
txFrqRegNotificationIdx
OBJECT-TYPE
The notification number as below rsXx9TxNotifications. This is a helper column and therefore not-accessible.
1.3.6.1.4.1.2566.127.1.2.216.3.1.5.1.1.3Unsigned32 (5000..5004)not-accessiblecurrent
txFrqRegNotificationName
OBJECT-TYPE
The notification number as an enumeration. The enumeration correlates with the notifications under rsXx9TxNotifications.
1.3.6.1.4.1.2566.127.1.2.216.3.1.5.1.1.4INTEGER {txFrqRegSummary(5000), txFrqRegCurrentSource(5001), txFrqRegSourceExtRef(5002), txFrqRegSourceExtPPS(5003), txFrqRegSourceIntGPS(5004)}read-onlycurrent
txFrqRegNotificationMask
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.5.1.1.5NotificationMaskread-writecurrent
txFrqRegNotificationPriority
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.5.1.1.6NotificationPriorityread-writecurrent
txFrqRegNotificationState
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.5.1.1.7NotificationStateread-onlycurrent
txFrqRegStateTable
OBJECT-TYPE
Frequency regulation status.
1.3.6.1.4.1.2566.127.1.2.216.3.1.5.2not-accessiblecurrent
txFrqRegStateEntry
OBJECT-TYPE
An entry in the txSfnFreqRegulationTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.5.2.1not-accessiblecurrent
txFrqRegStateCurrentSource
OBJECT-TYPE
The current source for frequency synchronization.
1.3.6.1.4.1.2566.127.1.2.216.3.1.5.2.1.1INTEGER {manual(1), external5MHz(2), external10MHz(3), externalPPS(4), internalGPS(5)}read-onlycurrent
txFrqRegStateController
OBJECT-TYPE
The precision of frequency regulation.
1.3.6.1.4.1.2566.127.1.2.216.3.1.5.2.1.2INTEGER {unknown(1), inaccurate(2), good(3), standsGuardTime(4)}read-onlycurrent
txFrqRegStateCurrentControllerMode
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.5.2.1.3ControllerModeread-onlycurrent
txFrqRegSetupTable
OBJECT-TYPE
Frequency regulation configuration.
1.3.6.1.4.1.2566.127.1.2.216.3.1.5.3not-accessiblecurrent
txFrqRegSetupEntry
OBJECT-TYPE
An entry in the txFrqRegSetupTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.5.3.1not-accessiblecurrent
txFrqRegSetupSource
OBJECT-TYPE
The appropriate signal source for the reference frequency may be determined automatically or defined by this value. If auto(6) is choosen and several signal sources are available, an external reference will be preferred over internal GPS. If manual(1) is choosen the OCXO may be set with txSfnFreqRegManualOcxoAdjust.
1.3.6.1.4.1.2566.127.1.2.216.3.1.5.3.1.1INTEGER {manual(1), external5MHz(2), external10MHz(3), externalPPS(4), internalGPS(5), auto(6)}read-writecurrent
txFrqRegSetupControllerMode
OBJECT-TYPE
When using an external 1PPS reference source with high jitter, activating this function can provide better frequency stability. For 'good' reference signals, this function should be disabled, as the regulator takes significantly longer to attain its maximum frequency stability.
1.3.6.1.4.1.2566.127.1.2.216.3.1.5.3.1.2ControllerModeread-writecurrent
txFrqRegSetupRefFailPermissionTime
OBJECT-TYPE
Defines how many hours after loss of reference signal processing will go on.
1.3.6.1.4.1.2566.127.1.2.216.3.1.5.3.1.3Unsigned32 (0..24)read-writecurrent
txFrqRegSetupMuteOnFail
OBJECT-TYPE
Determines performance in case of reference loss. never(1) - muting is never done onlyAtStartup(2) - ifGuardTimeExpires(3) - muting is done if reference loss lasts more than txSfnFreqRegRefFailPermissionTime
1.3.6.1.4.1.2566.127.1.2.216.3.1.5.3.1.4INTEGER {never(1), onlyAtStartup(2), ifGuardTimeExpires(3)}read-writecurrent
txFrqRegSetupManualOcxoAdjust
OBJECT-TYPE
Enables adjustment of the internal crystal oszillator.
1.3.6.1.4.1.2566.127.1.2.216.3.1.5.3.1.5Unsigned32 (0..65535)read-writecurrent
txFrqRegSetupMonitor
OBJECT-TYPE
Selects the signal for the monitor out connector (X24). cofdmSync(7) - a synchronous signal at start of a DAB COFDM frame
1.3.6.1.4.1.2566.127.1.2.216.3.1.5.3.1.6INTEGER {off(1), internal5MHz(2), internal10MHz(3), internal1PPS(4), internalGPS(5), currentSource(6), cofdmSync(7)}read-writecurrent
txSFN
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.3.1.6
txSfnNotificationTable
OBJECT-TYPE
The context information/configuration for the SFN status notifications.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.1not-accessiblecurrent
txSfnNotificationEntry
OBJECT-TYPE
An entry in the txSfnNotificationTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.1.1not-accessiblecurrent
txSfnNotificationTxIdx
OBJECT-TYPE
The transmitter index.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.1.1.1IndexTransmitternot-accessiblecurrent
txSfnNotificationExcIdx
OBJECT-TYPE
This index distinguishes the exiters. Necessary if you have dual drive transmitters.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.1.1.2IndexABnot-accessiblecurrent
txSfnNotificationIdx
OBJECT-TYPE
The notification number as below rsXx9TxNotifications. This is a helper column and therefore not-accessible.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.1.1.3Unsigned32 (6000)not-accessiblecurrent
txSfnNotificationName
OBJECT-TYPE
The notification number as an enumeration. The enumeration correlates with the notifications under rsXx9TxNotifications.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.1.1.4INTEGER {txSfnSummary(6000)}read-onlycurrent
txSfnNotificationMask
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.1.1.5NotificationMaskread-writecurrent
txSfnNotificationPriority
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.1.1.6NotificationPriorityread-writecurrent
txSfnNotificationState
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.1.1.7NotificationStateread-onlycurrent
txSfnStateTable
OBJECT-TYPE
Time synchronization status.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.2not-accessiblecurrent
txSfnStateEntry
OBJECT-TYPE
An entry in the txSfnTimeSyncTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.2.1not-accessiblecurrent
txSfnStateInternalPpsValid
OBJECT-TYPE
Shows whether the internal generated PPS is phase synchronous to frequency regulation.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.2.1.1TruthValueread-onlycurrent
txSfnStateTransmissionInTime
OBJECT-TYPE
Indicates whether or not the fed signal can be transmitted in a time-synchronous manner. If an error message is displayed, check the reference feed of the Time Synchronization and the Frequency Regulation.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.2.1.2INTEGER {unknown(2), outOfTime(4), inTime(5)}read-onlycurrent
txSfnStateNetworkDelay
OBJECT-TYPE
Delivery time of signal from SFN adapter till transmitter input. For DVB-T, ISDB-T, DTMB, ATSC only.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.2.1.3Unsigned32read-onlycurrent
txSfnStateProcessingTime
OBJECT-TYPE
Time used for internal signal processing. For DAB, this indicates the minimal transit time of the signal through the transmitter. The transit time is determined by the signal processing in the Channel Encoder (COFDM) and is depending on the set DAB mode.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.2.1.4Unsigned32read-onlycurrent
txSfnStateDynamicDelay
OBJECT-TYPE
SFN controlled time delay for matching transmitting point in time exactly.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.2.1.5Unsigned32read-onlycurrent
txSfnStateTotalDelay
OBJECT-TYPE
Overall retention time through transmitter: sum of txSfnTimeSyncProcessingTime and txSfnTimeSyncDynamicDelay
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.2.1.6Unsigned32read-onlycurrent
txSfnStateMaximumDelay
OBJECT-TYPE
Time taken for the signal to travel from the play-out center to the transmitter antenna for regular transmission. This delay is set in the SFN adapter and is the default for all transmitters in a dynamic SFN. For DVB-T, ISDB-T, DTMB, ATSC only.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.2.1.7Unsigned32read-onlycurrent
txSfnStateDispatchTime
OBJECT-TYPE
Time taken for the signal to travel from the play-out center to the transmitter antenna for real transmission. This delay corresponds to the default Maximum Delay for all transmitters in a SFN plus tranmitter specific Static Delay Offset plus Tx Time Offset (if available). For DVB-T, ISDB-T, DTMB, ATSC only.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.2.1.8Unsigned32read-onlycurrent
txSfnStatePPS
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.2.1.9INTEGER {notStated(1), missing(2), holdoverExpired(3), holdover(4), ok(5)}read-onlycurrent
txSfnStateSFN
OBJECT-TYPE
Shows whether the fed signal may be transmitted time synchronous.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.2.1.10INTEGER {notStated(1), sfnResync(2), noTimeReference(3), inTime(4), noTimeInformation(5), wrongSfnTimeSetup(6), wrongFreqRefSource(7)}read-onlycurrent
txSfnStateTimestampState
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.2.1.11INTEGER {off(1), none(2), null(3), relative(4), absolute(5), multiple(6)}read-onlycurrent
txSfnSetupTable
OBJECT-TYPE
Time synchronization configuration.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.3not-accessiblecurrent
txSfnSetupEntry
OBJECT-TYPE
An entry in the txSfnSetupTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.3.1not-accessiblecurrent
txSfnSetupSource
OBJECT-TYPE
The suitable signal source for synchronizing the time of transmission.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.3.1.1INTEGER {externalPPS(4), internalGPS(5)}read-writecurrent
txSfnSetupSFN
OBJECT-TYPE
Selects mode of time synchronization: off(2) - MFN on(3) - SFN for ISDB-T, please use isdbtCfgNetworkMode instead for DTMB, please use dtmbConfigurationNetworkMode instead for DAB, please use dabSetupSfnSync instead
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.3.1.2INTEGER {undefined(1), off(2), on(3)}read-writecurrent
txSfnSetupMaxDeviation
OBJECT-TYPE
Maximum admissible deviation for transmitting point in time.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.3.1.3Unsigned32 (1..1000)read-writecurrent
txSfnSetupStaticDelay
OBJECT-TYPE
Positive or negative offset transferred in the MIP (DVB-T) respectively in IIP (ISDB-T) for the individual transmitter location of the time of transmission relative to the regular time of transmission preset by the Maximum Delay. This delay is only displayed and activated if the Tx automatic function (DVB-T) respectively Equipment Control (ISDB-T) is active. If Tx Offset Delay and Static Delay are present at the same time, their effects are added together.
1.3.6.1.4.1.2566.127.1.2.216.3.1.6.3.1.4Integer32 (-100000000..100000000)read-writecurrent
txGPS
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.3.1.7
txPrecorrection
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.3.1.8
txPrecorrNotificationTable
OBJECT-TYPE
The context information/configuration for the precorrection status notifications.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.1not-accessiblecurrent
txPrecorrNotificationEntry
OBJECT-TYPE
An entry in the txPrecorrNotificationTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.1.1not-accessiblecurrent
txPrecorrNotificationTxIdx
OBJECT-TYPE
The transmitter index.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.1.1.1IndexTransmitternot-accessiblecurrent
txPrecorrNotificationExcIdx
OBJECT-TYPE
This index distinguishes the exiters. Necessary if you have dual drive transmitters.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.1.1.2IndexABnot-accessiblecurrent
txPrecorrNotificationIdx
OBJECT-TYPE
The notification number as below rsXx9TxNotifications. This is a helper column and therefore not-accessible.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.1.1.3Unsigned32 (8000..8002)not-accessiblecurrent
txPrecorrNotificationName
OBJECT-TYPE
The notification number as an enumeration. The enumeration correlates with the notifications under rsXx9TxNotifications.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.1.1.4INTEGER {txPrecorrLinSummary(8000), txPrecorrNonLinSummary(8001), txPrecorrMerState(8002)}read-onlycurrent
txPrecorrNotificationMask
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.1.1.5NotificationMaskread-writecurrent
txPrecorrNotificationPriority
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.1.1.6NotificationPriorityread-writecurrent
txPrecorrNotificationState
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.1.1.7NotificationStateread-onlycurrent
txPrecorrectionLinear
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.2
txPrecorrLinStateTable
OBJECT-TYPE
Linear precorrection state information.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.2.1not-accessiblecurrent
txPrecorrLinStateEntry
OBJECT-TYPE
An entry in the txPrecorrLinStateTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.2.1.1not-accessiblecurrent
txPrecorrLinStateTxIdx
OBJECT-TYPE
The transmitter index.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.2.1.1.1IndexTransmitternot-accessiblecurrent
txPrecorrLinStateExcIdx
OBJECT-TYPE
This index distinguishes the exiters. Necessary if you have dual drive transmitters.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.2.1.1.2IndexABnot-accessiblecurrent
txPrecorrLinStateStatus
OBJECT-TYPE
Linear precorrection state. see textual convention
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.2.1.1.3PrecorrectionStateread-onlycurrent
txPrecorrLinStateSignalLevel
OBJECT-TYPE
see textual convention
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.2.1.1.4PrecorrectionSignalLevelread-onlycurrent
txPrecorrLinStateAmplitudeRipple
OBJECT-TYPE
achieved residual ripple for amplitude
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.2.1.1.5Integer32read-onlycurrent
txPrecorrLinStateGroupDelayRipple
OBJECT-TYPE
achieved residual ripple for group delay
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.2.1.1.6Integer32read-onlycurrent
txPrecorrLinStateAmplitudeRippleLimit
OBJECT-TYPE
off(2) - precorrection with this limit was successful or limit is not checked warning(4) - limit is not reachable
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.2.1.1.7NotificationStateread-onlycurrent
txPrecorrLinStateGroupDelayRippleLimit
OBJECT-TYPE
off(2) - precorrection with this limit was successful or limit is not checked warning(4) - limit is not reachable
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.2.1.1.8NotificationStateread-onlycurrent
txPrecorrLinSetupTable
OBJECT-TYPE
Linear precorrection settings.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.2.2not-accessiblecurrent
txPrecorrLinSetupEntry
OBJECT-TYPE
An entry in the txPrecorrLinSetupTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.2.2.1not-accessiblecurrent
txPrecorrLinSetupOpMode
OBJECT-TYPE
see textual convention
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.2.2.1.1PrecorrectionOperationModeread-writecurrent
txPrecorrLinSetupReset
OBJECT-TYPE
Reset of predistorter leads to recalculation of precorrection curve. Meanwhile precorrection is not active.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.2.2.1.2Triggerread-writecurrent
txPrecorrLinSetupAmplitudeRippleLimit
OBJECT-TYPE
Desired maximal amplitude ripple on filter output.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.2.2.1.3Unsigned32 (1..20)read-writecurrent
txPrecorrLinSetupGroupDelayRippleLimit
OBJECT-TYPE
Desired maximal group delay ripple on filter output.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.2.2.1.4Unsigned32 (10..500)read-writecurrent
txPrecorrLinSetupEquipmentSlope
OBJECT-TYPE
Description
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.2.2.1.5Integer32 (-100..100)read-writecurrent
txPrecorrectionNonLinear
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.3
txPrecorrNonLinStateTable
OBJECT-TYPE
Non linear precorrection state information.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.3.1not-accessiblecurrent
txPrecorrNonLinStateEntry
OBJECT-TYPE
An entry in the txPrecorrNonLinStateTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.3.1.1not-accessiblecurrent
txPrecorrNonLinStateTxIdx
OBJECT-TYPE
The transmitter index.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.3.1.1.1IndexTransmitternot-accessiblecurrent
txPrecorrNonLinStateExcIdx
OBJECT-TYPE
This index distinguishes the exiters. Necessary if you have dual drive transmitters.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.3.1.1.2IndexABnot-accessiblecurrent
txPrecorrNonLinStateStatus
OBJECT-TYPE
Nonlinear precorrection state. see textual convention
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.3.1.1.3PrecorrectionStateread-onlycurrent
txPrecorrNonLinStateSignalLevel
OBJECT-TYPE
see textual convention
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.3.1.1.4PrecorrectionSignalLevelread-onlycurrent
txPrecorrNonLinStateShoulderLeft
OBJECT-TYPE
achieved shoulder distance in the left area of signal spectrum
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.3.1.1.5Integer32read-onlycurrent
txPrecorrNonLinStateShoulderRight
OBJECT-TYPE
achieved shoulder distance in the right area of signal spectrum
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.3.1.1.6Integer32read-onlycurrent
txPrecorrNonLinSetupTable
OBJECT-TYPE
Non linear precorrection settings.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.3.2not-accessiblecurrent
txPrecorrNonLinSetupEntry
OBJECT-TYPE
An entry in the txPrecorrNonLinSetupTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.3.2.1not-accessiblecurrent
txPrecorrNonLinSetupOpMode
OBJECT-TYPE
see textual convention
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.3.2.1.1PrecorrectionOperationModeread-writecurrent
txPrecorrNonLinSetupReset
OBJECT-TYPE
Reset of predistorter leads to recalculation of precorrection curve. Meanwhile precorrection is not active.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.3.2.1.2Triggerread-writecurrent
txPrecorrNonLinSetupShoulderDistance
OBJECT-TYPE
Desired shoulder distance of the output signal.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.3.2.1.3Unsigned32 (30..45)read-writecurrent
txPrecorrNonLinSetupSignalLimit
OBJECT-TYPE
Limits the signal on input of the nonlinear precorrector. obsolete
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.3.2.1.4Unsigned32 (60..120)read-writeobsolete
txPrecorrectionCfrTable
OBJECT-TYPE
crest factor reduction parameters
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.4not-accessiblecurrent
txPrecorrectionCfrEntry
OBJECT-TYPE
An entry in the txPrecorrectionCfrTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.4.1not-accessiblecurrent
txPrecorrCfrEnable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.4.1.1INTEGER {bypass(1), manual(2), auto(3), run(4)}read-writecurrent
txPrecorrCfrLevel
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.4.1.2Unsigned32 (50..150)read-writecurrent
txPrecorrCfrInbandNoise
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.4.1.3Unsigned32 (0..100)read-writecurrent
txPrecorrCfrOutbandNoise
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.4.1.4Unsigned32 (0..100)read-writecurrent
txPrecorrSigQualTable
OBJECT-TYPE
signal quality parameters
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.5not-accessiblecurrent
txPrecorrSigQualEntry
OBJECT-TYPE
An entry in the txPrecorrSigQualTable
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.5.1not-accessiblecurrent
txPrecorrSigQualTxIdx
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.5.1.1IndexTransmitternot-accessiblecurrent
txPrecorrSigQualExcIdx
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.5.1.2IndexABnot-accessiblecurrent
txPrecorrSigQualPapr
OBJECT-TYPE
The Peak to Average Power Ratio indicates the proportion between peak and average in-band power.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.5.1.3Integer32read-onlycurrent
txPrecorrSigQualMer
OBJECT-TYPE
The Modulation Error Rate indicates the signal quality. A bad MER can be seen in a constellation diagram as a cloud of constellation points. A high MER let look the constellation points sharper. When the MER is too low a receiver can not differ between distinct constellation points an produces errors.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.5.1.4Integer32read-onlycurrent
txPrecorrSigQualMerWarnLimit
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.8.5.1.5Integer32read-writecurrent
txOutputStage
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.3.1.9
txOstNotificationTable
OBJECT-TYPE
The context information/configuration for the output stage status notifications.
1.3.6.1.4.1.2566.127.1.2.216.3.1.9.1not-accessiblecurrent
txOstNotificationEntry
OBJECT-TYPE
An entry in the txOstNotificationTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.9.1.1not-accessiblecurrent
txOstNotificationTxIdx
OBJECT-TYPE
The transmitter index.
1.3.6.1.4.1.2566.127.1.2.216.3.1.9.1.1.1IndexTransmitternot-accessiblecurrent
txOstNotificationOstIdx
OBJECT-TYPE
This index distinguishes the output stages. Necessary if you have power reserve transmitters.
1.3.6.1.4.1.2566.127.1.2.216.3.1.9.1.1.2IndexABnot-accessiblecurrent
txOstNotificationIdx
OBJECT-TYPE
The notification number as below rsXx9TxNotifications. This is a helper column and therefore not-accessible.
1.3.6.1.4.1.2566.127.1.2.216.3.1.9.1.1.3Unsigned32 (9000)not-accessiblecurrent
txOstNotificationName
OBJECT-TYPE
The notification number as an enumeration. The enumeration correlates with the notifications under rsXx9TxNotifications.
1.3.6.1.4.1.2566.127.1.2.216.3.1.9.1.1.4INTEGER {txOstSummary(9000)}read-onlycurrent
txOstNotificationMask
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.9.1.1.5NotificationMaskread-writecurrent
txOstNotificationPriority
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.9.1.1.6NotificationPriorityread-writecurrent
txOstNotificationState
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.9.1.1.7NotificationStateread-onlycurrent
txOstStateTable
OBJECT-TYPE
Output stage state information.
1.3.6.1.4.1.2566.127.1.2.216.3.1.9.2not-accessiblecurrent
txOstStateEntry
OBJECT-TYPE
An entry in the txOstStateTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.9.2.1not-accessiblecurrent
txOstStateRfOnHours
OBJECT-TYPE
Shows how many hours this output stage generated a RF signal with a level above the fault threshold.
1.3.6.1.4.1.2566.127.1.2.216.3.1.9.2.1.3Unsigned32read-onlycurrent
txOstCommandsTable
OBJECT-TYPE
Output stage settings.
1.3.6.1.4.1.2566.127.1.2.216.3.1.9.3not-accessiblecurrent
txOstCommandsEntry
OBJECT-TYPE
An entry in the txOstCommandsTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.9.3.1not-accessiblecurrent
txOstCmdPower
OBJECT-TYPE
Output power of the output stage. About 800 o/oo correlate to the nominal power of the output stage. If the RF sensors are calibrated, the value adjusted here should determine the txOstForwardPower. The range for band II amplifiers is 0 - 1000.
1.3.6.1.4.1.2566.127.1.2.216.3.1.9.3.1.1Unsigned32 (0..1300)read-writecurrent
txOstCmdDcControl
OBJECT-TYPE
The range for TV amplifiers is 5000 - 11000. The range for band II amplifiers is 5000 - 10000. (DC Control for FM is only available in ConstantGain mode or for FM-HD)
1.3.6.1.4.1.2566.127.1.2.216.3.1.9.3.1.3Integer32 (4800..11000)read-writecurrent
txAmplifier
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.3.1.10
txAmpNotificationTable
OBJECT-TYPE
The context information/configuration for the amplifier status notifications.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.1not-accessiblecurrent
txAmpNotificationEntry
OBJECT-TYPE
An entry in the txAmpNotificationTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.1.1not-accessiblecurrent
txAmpNotificationTxIdx
OBJECT-TYPE
The transmitter index.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.1.1.1IndexTransmitternot-accessiblecurrent
txAmpNotificationOstIdx
OBJECT-TYPE
This index distinguishes the output stages. Necessary if you have power reserve transmitters.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.1.1.2IndexABnot-accessiblecurrent
txAmpNotificationAmpIdx
OBJECT-TYPE
This index distinguishes amplifiers in an output stage.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.1.1.3Unsigned32 (1..72)not-accessiblecurrent
txAmpNotificationIdx
OBJECT-TYPE
The notification number as below rsXx9TxNotifications. This is a helper column and therefore not-accessible.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.1.1.4Unsigned32 (10000..10017)not-accessiblecurrent
txAmpNotificationName
OBJECT-TYPE
The notification number as an enumeration. The enumeration correlates with the notifications under rsXx9TxNotifications.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.1.1.5INTEGER {txAmpSummary(10000), txAmpRfPowerFail(10001), txAmpReflection(10002), txAmpSupplyFail(10003), txAmpRfInFail(10004), txAmpMute(10005), txAmpTemperatureFail(10006), txAmpTransistorFail(10007), txAmpRegulationFail(10008), txAmpAcFail(10009), txAmpDcFail(10010), txAmpDriverFail(10011), txAmpLink(10012), txAmpBiasFail(10013), txAmpInitFail(10014), txAmpAbsorberFail(10015), txAmpOn(10016), txAmpBlocking(10017)}read-onlycurrent
txAmpNotificationMask
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.1.1.6NotificationMaskread-writecurrent
txAmpNotificationPriority
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.1.1.7NotificationPriorityread-writecurrent
txAmpNotificationState
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.1.1.8NotificationStateread-onlycurrent
txAmplifierStateTable
OBJECT-TYPE
General amplifier state information.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2not-accessiblecurrent
txAmplifierStateEntry
OBJECT-TYPE
An entry in the txAmplifierStateTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1not-accessiblecurrent
txAmpStI1A
OBJECT-TYPE
Current flowing through transistors V14 and V15 (PHU901) and V500 (PMU901) in transistor block A.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.1Unsigned32read-onlycurrent
txAmpStI2A
OBJECT-TYPE
Current flowing through transistors V16 and V17 (PHU901) and V1500 (PMU901) in transistor block A.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.2Unsigned32read-onlycurrent
txAmpStI3A
OBJECT-TYPE
Current flowing through transistors V18 and V19 (PHU901) and V2500 (PMU901) in transistor block A. only for PHU901, PHU902 and PMU901
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.3Unsigned32read-onlycurrent
txAmpStI1B
OBJECT-TYPE
Current flowing through transistors V24 and V25 (PHU901) and V600 (PMU901) in transistor block B.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.4Unsigned32read-onlycurrent
txAmpStI2B
OBJECT-TYPE
Current flowing through transistors V26 and V27 (PHU901) and V1600 (PMU901) in transistor block B.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.5Unsigned32read-onlycurrent
txAmpStI3B
OBJECT-TYPE
Current flowing through transistors V28 and V29 (PHU901) and V2600 (PMU901) in transistor block B. only for PHU901, PHU902 and PMU901
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.6Unsigned32read-onlycurrent
txAmpStIDrv
OBJECT-TYPE
Current flowing through the transistors of the driver module.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.7Unsigned32read-onlycurrent
txAmpStIPre
OBJECT-TYPE
Current flowing through transistors of the preamplifier module.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.8Unsigned32read-onlycurrent
txAmpStPwrA
OBJECT-TYPE
Measured voltage of the RF detector in transistor block A. not for PMU901
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.9Unsigned32read-onlycurrent
txAmpStPwrB
OBJECT-TYPE
Measured voltage of the RF detector in transistor block B. not for PMU901
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.10Unsigned32read-onlycurrent
txAmpStPwrOut
OBJECT-TYPE
Measured voltage of the RF detector at the output of the amplifier.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.11Unsigned32read-onlycurrent
txAmpStReflOut
OBJECT-TYPE
Measured voltage of the RF detector for the reflected power.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.12Unsigned32read-onlycurrent
txAmpStVRefPwr
OBJECT-TYPE
Nominal value predefined by theTCE900 for internal control of the output power. - With DVB and ATV signals, a value of 4 V roughly corresponds to the nominal power of the amplifier. - With ATV, a value of 4.18 V roughly corresponds to the nominal power of the amplifier. - With ATSC, a value of 4.56 volts roughly corresponds to the nominal power of the amplifier.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.13Unsigned32read-onlycurrent
txAmpStVReg
OBJECT-TYPE
Adjustment value for internal control of the output power.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.14Unsigned32read-onlyobsolete
txAmpStVPlusMon
OBJECT-TYPE
Displays the voltage supplied to the transistor blocks by the power supply unit. With PMU9, the displayed voltage should be approx. 44 V. With PHU9, the displayed voltage varies during adjustment between approx. 35 V and approx. 50 V. If the displayed voltage is 0 V, either the power supply unit is faulty or the amplifier has not been switched on.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.15Unsigned32read-onlycurrent
txAmpStIDc
OBJECT-TYPE
Total current which is supplied by the internal power supply units. If the displayed current is 0 A, the amplifier has not been switched on by the TCE900 or one of the following faults has occurred: - RF In Fail - Temperature Fail - DC Fail
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.16Unsigned32read-onlycurrent
txAmpStVPreMon
OBJECT-TYPE
Supply voltage of the preamplifier. In the ON state, it is approx. 20 V and is generated on the preamplifier board. The displayed voltage is 0 V if the amplifier has been switched off by the TCE900. If no voltage is indicated in the ON state, the automatic circuit breakers of the energy distribution and the self-engaging contacts on the rear panel of the amplifier should be checked first of all. If no fault can be found in the energy feed, the amplifier must be replaced. not for PMV901
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.17Unsigned32read-onlycurrent
txAmpStVAuxIn
OBJECT-TYPE
Supply voltage of the amplifier control board. This auxiliary voltage is generated directly by the power supply unit and is fed to the amplifier control board via the preamplifier board. This voltage should be present at the amplifier control board even if the amplifier has been switched off by the TCE900. If no voltage is displayed, the automatic circuit breakers of the power distribution as well as the self-engaging contacts on the rear panel of the amplifier should be checked first of all. If no fault can be found in the energy feed, the amplifier must be replaced.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.18Unsigned32read-onlycurrent
txAmpStV12Mon
OBJECT-TYPE
12 V auxiliary voltage which is generated on the preamplifier board from the 20 V supply voltage (txAmpStVPreMon). If the amplifier has not been switched on by the TCE900, the voltage is approx. 8 V.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.19Unsigned32read-onlycurrent
txAmpStV5Acb
OBJECT-TYPE
5 V auxiliary voltage which is generated on the amplifier control board from the auxiliary voltage (txAmpStVAuxIn) of the power supply unit. If no voltage is indicated, the automatic circuit breakers of the energy distribution and also the self-engaging contacts on the rear panel of the amplifier should be checked first of all. If no fault can be found in the energy feed, the amplifier must be replaced.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.20Unsigned32read-onlycurrent
txAmpStV3V5
OBJECT-TYPE
3.5 V auxiliary voltage which is generated on the amplifier control board from the auxiliary voltage (txAmpStVAuxIn) of the power supply unit. If no voltage is indicated, the automatic circuit breakers of the energy distribution and also the self-engaging contacts on the rear panel of the amplifier should be checked first of all. If no fault can be found in the energy feed, the amplifier must be replaced.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.21Unsigned32read-onlycurrent
txAmpStTemperature
OBJECT-TYPE
Amplifier temperature; usually a few degrees higher than the coolant temperature. If the difference is greater than 15 deg C, either the stop valves are closed or the coolant flow is too low.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.22Integer32read-onlycurrent
txAmpStRfMonitor
OBJECT-TYPE
Coupling attenuation of the 'RF monitor' test point at 650 MHz.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.2.1.23Integer32read-onlycurrent
txAmplifierPmxTable
OBJECT-TYPE
Specific parameters for PMU and PMV amplifiers.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.3not-accessiblecurrent
txAmplifierPmxEntry
OBJECT-TYPE
An entry in the txAmplifierPmxTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.3.1not-accessiblecurrent
txPmxFanFail
OBJECT-TYPE
Indicates whether the fans used to dissipate heat from the amplifier module are functioning. off(2) - fans are functioning correctly warning(4)
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.3.1.1NotificationStateread-onlycurrent
txPmxAirFilterFail
OBJECT-TYPE
off(2) warning(4) - High difference between inlet and outlet air temperature. Air filter probably clogged.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.3.1.2NotificationStateread-onlyobsolete
txPmxFrequencyFail
OBJECT-TYPE
This fault occurs if the tunit (tuning unit) used in the amplifier is not suitable for the RF of the exciter. The tunit is a plug-in module and is on the top side of the amplifier. Please check that the used tunit is suitable for the frequency which is set in the Output menu of the exciter, and whether it has been installed in the amplifier in the 'Doherty' or 'Broadband' position corresponding to the setting in the 'Basic Config' menu in the GUI. off(2) - fault(3) - The tuning unit in the amplifier is not suitable for the RF of the exciter. for PMU901 only
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.3.1.3NotificationStateread-onlycurrent
txPmxFreqID
OBJECT-TYPE
ID that the tuning unit in amplifier must have for the intended frequency. Obsoleted - see txPmxFreqIDString for a replacement.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.3.1.4Unsigned32read-onlyobsolete
txPmxInletAirTemperature
OBJECT-TYPE
Inlet air temperature of the amplifier module. It should always be in the range +1 degree C to +45 degrees celsius.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.3.1.5Integer32read-onlycurrent
txPmxOutletAirTemperature
OBJECT-TYPE
Outlet air temperature of the amplifier module.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.3.1.6Integer32read-onlycurrent
txPmxvRefPowerMax
OBJECT-TYPE
maximal admissible reference voltage
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.3.1.7Unsigned32read-onlyobsolete
txPmxFreqIDString
OBJECT-TYPE
ID of the frequency range in Doherty mode
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.3.1.8SnmpAdminStringread-onlycurrent
txPmxDohertyActive
OBJECT-TYPE
Indicates whether the Doherty mode of the amplifier is active or not. for PMV901 only
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.3.1.9DohertyActiveread-onlycurrent
txAmplifierPhr901Table
OBJECT-TYPE
specific PHR901 parameters.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.4not-accessiblecurrent
txAmplifierPhr901Entry
OBJECT-TYPE
An entry in the txAmplifierPhr901Table.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.4.1not-accessiblecurrent
txPhr901PwrA
OBJECT-TYPE
The measured power of the RF detector in transistor block A.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.4.1.1Unsigned32read-onlyobsolete
txPhr901PwrB
OBJECT-TYPE
The measured power of the RF detector in transistor block B.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.4.1.2Unsigned32read-onlyobsolete
txPhr901PwrOutAv
OBJECT-TYPE
The measured forward power at the output of the amplifier.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.4.1.3Unsigned32read-onlyobsolete
txPhr901ReflOutAv
OBJECT-TYPE
The measured reflected power at the output of the amplifier.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.4.1.4Unsigned32read-onlyobsolete
txPhr901PwrAbs
OBJECT-TYPE
The measured power on the final absorber of the amplifier.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.4.1.5Unsigned32read-onlyobsolete
txPhr901PwrIn
OBJECT-TYPE
The measured power at the input of the amplifier.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.4.1.6Unsigned32read-onlycurrent
txPhr901PwrDrv
OBJECT-TYPE
The measured power of the driver stage of the amplifier.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.4.1.7Unsigned32read-onlycurrent
txPhr901I12
OBJECT-TYPE
The sum of measured currents of transistors T101 and T102.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.4.1.8Unsigned32read-onlycurrent
txPhr901I34
OBJECT-TYPE
The sum of measured currents of transistors T103 and T104.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.4.1.9Unsigned32read-onlycurrent
txPhr901I56
OBJECT-TYPE
The sum of measured currents of transistors T105 and T106.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.4.1.10Unsigned32read-onlycurrent
txPhr901I78
OBJECT-TYPE
The sum of measured currents of transistors T107 and T108.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.4.1.11Unsigned32read-onlycurrent
txAmplifierPhxTable
OBJECT-TYPE
Specific parameters for PHU and PHV amplifiers.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.5not-accessiblecurrent
txAmplifierPhxEntry
OBJECT-TYPE
An entry in the txAmplifierPhxTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.5.1not-accessiblecurrent
txPhxFreqID
OBJECT-TYPE
ID that the tuning unit in amplifier must have for the intended frequency. Obsoleted - see txPhxFreqIDString for a replacement.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.5.1.1Unsigned32read-onlyobsolete
txPhxFreqIDString
OBJECT-TYPE
ID of the frequency range in Doherty mode for PHU902 and PHV902 only
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.5.1.2SnmpAdminStringread-onlycurrent
txPhxDohertyActive
OBJECT-TYPE
Indicates whether the Doherty mode of the amplifier is active or not. for PHU902 and PHV902 only
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.5.1.3DohertyActiveread-onlycurrent
txAmplifierTlxTable
OBJECT-TYPE
Specific parameters for TLx amplifiers.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.6not-accessiblecurrent
txAmplifierTlxEntry
OBJECT-TYPE
An entry in the txAmplifierTlxTable,
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.6.1not-accessiblecurrent
txAmpTlxFanFail
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.6.1.1NotificationStateread-onlycurrent
txAmpTlxV12Mon
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.6.1.2Unsigned32read-onlycurrent
txAmpTlxSupplyFail
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.10.6.1.3NotificationStateread-onlycurrent
txSwitchlessCombiner
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.3.1.11
txSwiCoNotificationTable
OBJECT-TYPE
The context information/configuration for the Switchless Combiner status notifications. Only available if Switchless Combiner is configured.
1.3.6.1.4.1.2566.127.1.2.216.3.1.11.1not-accessiblecurrent
txSwiCoNotificationEntry
OBJECT-TYPE
An entry in the txSwiCoNotificationTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.11.1.1not-accessiblecurrent
txSwiCoNotificationTxIdx
OBJECT-TYPE
The transmitter index.
1.3.6.1.4.1.2566.127.1.2.216.3.1.11.1.1.1IndexTransmitternot-accessiblecurrent
txSwiCoNotificationSwiCoIdx
OBJECT-TYPE
This index distinguishes Switchless Combiners.
1.3.6.1.4.1.2566.127.1.2.216.3.1.11.1.1.2Unsigned32 (1)not-accessiblecurrent
txSwiCoNotificationIdx
OBJECT-TYPE
The notification number as below rsXx9TxNotifications. This is a helper column and therefore not-accessible.
1.3.6.1.4.1.2566.127.1.2.216.3.1.11.1.1.3Unsigned32 (11000..11008)not-accessiblecurrent
txSwiCoNotificationName
OBJECT-TYPE
The notification number as an enumeration. The enumeration correlates with the notifications under rsXx9TxNotifications.
1.3.6.1.4.1.2566.127.1.2.216.3.1.11.1.1.4INTEGER {txSwiCoSummary(11000), txSwiCoHwLink(11001), txSwiCoHwWarn(11002), txSwiCoHwFault(11003), txSwiCoHwLocal(11004), txSwiCoRcbFail(11005), txSwiCoRfProbeFail(11006), txSwiCoRegulationSummary(11007)}read-onlycurrent
txSwiCoNotificationMask
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.11.1.1.5NotificationMaskread-writecurrent
txSwiCoNotificationPriority
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.11.1.1.6NotificationPriorityread-writecurrent
txSwiCoNotificationState
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.11.1.1.7NotificationStateread-onlycurrent
txSwiCoStateTable
OBJECT-TYPE
General Switchless Combiner state information. Only available is Switchless Combiner is configured.
1.3.6.1.4.1.2566.127.1.2.216.3.1.11.2not-accessiblecurrent
txSwiCoStateEntry
OBJECT-TYPE
An entry in the txSwiCoStateTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.11.2.1not-accessiblecurrent
txSwiCoStRegulationState
OBJECT-TYPE
Indicates whether the control is currently working. Hold: The phase angle is constant. Phase decreasing/Phase increasing: The phase angle is currently being changed.
1.3.6.1.4.1.2566.127.1.2.216.3.1.11.2.1.1INTEGER {stablePosition(1), increasingPhaseAngle(2), decreasingPhaseAngle(3)}read-onlycurrent
txSwiCoStCalibrationState
OBJECT-TYPE
Indicates whether the switchless combiner has been calibrated for the current transmitter frequency. OK: The switchless combiner is calibrated. Warning: The switchless combiner has not yet been calibrated.
1.3.6.1.4.1.2566.127.1.2.216.3.1.11.2.1.2INTEGER {calibrated(1), notCalibrated(2)}read-onlycurrent
txSwiCoStPosGraded
OBJECT-TYPE
Shows the position of Switchless Combiner in these steps: 0: < 0deg 1: 0deg 2: between 0deg and 90 deg (2 and 4 racks) or 110deg (3 racks) 3: 90deg (2 and 4 racks) or 110deg (3 racks) 4: between 90deg (2 and 4 racks) or 110deg (3 racks) and 180deg 5: > 180deg
1.3.6.1.4.1.2566.127.1.2.216.3.1.11.2.1.3Unsigned32 (0..5)read-onlycurrent
txSwiCoStPosDegree
OBJECT-TYPE
Indicates the current effective phase angle between the two inputs. If the coupling is symmetric, the phase angle is 90 degrees. If the switchless combiner has not yet been calibrated for the current transmitter frequency, the display shows a %.
1.3.6.1.4.1.2566.127.1.2.216.3.1.11.2.1.4Integer32 (-1..500)read-onlycurrent
txSwiCoStPosPermil
OBJECT-TYPE
Indicates the current effective phase angle between the two inputs. If the coupling is symmetric, the phase angle is 90 degrees. If the switchless combiner has not yet been calibrated for the current transmitter frequency, the display shows a %.
1.3.6.1.4.1.2566.127.1.2.216.3.1.11.2.1.5Unsigned32 (0..1000)read-onlycurrent
txSwiCoCommandsTable
OBJECT-TYPE
Switchless Cominer settings. Only available is Switchless Combiner is configured.
1.3.6.1.4.1.2566.127.1.2.216.3.1.11.3not-accessiblecurrent
txSwiCoCommandsEntry
OBJECT-TYPE
An entry in the txSwiCoCommandsTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.11.3.1not-accessiblecurrent
txSwiCoCmdAutomatic
OBJECT-TYPE
Switches the automatic power control of the rack combiner on and off.
1.3.6.1.4.1.2566.127.1.2.216.3.1.11.3.1.1INTEGER {manual(1), automatic(2)}read-writecurrent
txSwiCoCmdManualPosition
OBJECT-TYPE
Indicates which input was switched to the antenna when automatic ^ is switched off. The setting can be changed here.
1.3.6.1.4.1.2566.127.1.2.216.3.1.11.3.1.2INTEGER {undefinedPosition(1), position1(2), position2(3), position1and2(4)}read-writecurrent
txSwiCoCmdActivationThreshold
OBJECT-TYPE
If the output power is below the nominal power minus this activation threshold value, the Switchless Combiner Automatic will react.
1.3.6.1.4.1.2566.127.1.2.216.3.1.11.3.1.3Unsigned32 (0..600)read-writecurrent
txPresets
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.3.1.12
txPresetCommandsTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.12.2not-accessiblecurrent
txPresetCommandsEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.12.2.1not-accessiblecurrent
txPresetCmdTxIdx
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.12.2.1.1IndexTransmitternot-accessiblecurrent
txPresetCmdLoadPreset1
OBJECT-TYPE
Activates one of up to four previously saved sets of program and feed setting values. If a name is assigned to a preset, this name appears on the button. 'Load Preset' is only available for used memory locations.
1.3.6.1.4.1.2566.127.1.2.216.3.1.12.2.1.2Triggerread-writecurrent
txPresetCmdLoadPreset2
OBJECT-TYPE
Activates one of up to four previously saved sets of program and feed setting values. If a name is assigned to a preset, this name appears on the button. 'Load Preset' is only available for used memory locations.
1.3.6.1.4.1.2566.127.1.2.216.3.1.12.2.1.3Triggerread-writecurrent
txPresetCmdLoadPreset3
OBJECT-TYPE
Activates one of up to four previously saved sets of program and feed setting values. If a name is assigned to a preset, this name appears on the button. 'Load Preset' is only available for used memory locations.
1.3.6.1.4.1.2566.127.1.2.216.3.1.12.2.1.4Triggerread-writecurrent
txPresetCmdLoadPreset4
OBJECT-TYPE
Activates one of up to four previously saved sets of program and feed setting values. If a name is assigned to a preset, this name appears on the button. 'Load Preset' is only available for used memory locations.
1.3.6.1.4.1.2566.127.1.2.216.3.1.12.2.1.5Triggerread-writecurrent
txPresetCmdSavePreset1
OBJECT-TYPE
Saves all currently active program and feed settings to one of four memory locations. Previously saved settings are overwritten. If a name is assigned to a preset, this name appears on the button. 'Save Preset' is only available if all components of the transmitter are operating correctly.
1.3.6.1.4.1.2566.127.1.2.216.3.1.12.2.1.6Triggerread-writecurrent
txPresetCmdSavePreset2
OBJECT-TYPE
Saves all currently active program and feed settings to one of four memory locations. Previously saved settings are overwritten. If a name is assigned to a preset, this name appears on the button. 'Save Preset' is only available if all components of the transmitter are operating correctly.
1.3.6.1.4.1.2566.127.1.2.216.3.1.12.2.1.7Triggerread-writecurrent
txPresetCmdSavePreset3
OBJECT-TYPE
Saves all currently active program and feed settings to one of four memory locations. Previously saved settings are overwritten. If a name is assigned to a preset, this name appears on the button. 'Save Preset' is only available if all components of the transmitter are operating correctly.
1.3.6.1.4.1.2566.127.1.2.216.3.1.12.2.1.8Triggerread-writecurrent
txPresetCmdSavePreset4
OBJECT-TYPE
Saves all currently active program and feed settings to one of four memory locations. Previously saved settings are overwritten. If a name is assigned to a preset, this name appears on the button. 'Save Preset' is only available if all components of the transmitter are operating correctly.
1.3.6.1.4.1.2566.127.1.2.216.3.1.12.2.1.9Triggerread-writecurrent
txPresetStatusTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.12.3not-accessiblecurrent
txPresetStatusEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.12.3.1not-accessiblecurrent
txPresetStActivePreset
OBJECT-TYPE
Indicates which settings are currently active. If a preset has not yet been loaded, 'Not Active' is displayed.
1.3.6.1.4.1.2566.127.1.2.216.3.1.12.3.1.1INTEGER {notActive(0), preset1(1), preset2(2), preset3(3), preset4(4)}read-onlycurrent
txPresetStProgramSettings
OBJECT-TYPE
Shows a warning if, after a preset is loaded, the currently active settings have been changed but not yet saved again in a preset. In this case, data will be lost if the preset is switched over to a different preset. If all memory locations are empty, 'Presets not Used' appears.
1.3.6.1.4.1.2566.127.1.2.216.3.1.12.3.1.2INTEGER {undefined(1), notSaved(2), saved(3)}read-onlycurrent
txRfSensors
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.3.1.13
txRfSensorsNotificationTable
OBJECT-TYPE
The context information/configuration for the Switchless Combiner status notifications.
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.1not-accessiblecurrent
txRfSensorsNotificationEntry
OBJECT-TYPE
An entry in the txRfSensorsNotificationTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.1.1not-accessiblecurrent
txRfSensorsNotificationTxIdx
OBJECT-TYPE
The transmitter index.
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.1.1.1IndexTransmitternot-accessiblecurrent
txRfSensorsNotificationSensorIdx
OBJECT-TYPE
This index distinguishes Rf sensors. Rf sensor 1 of a Tx is the Tx's antenna sensor. Rf sensor 2 of a Tx is the Tx's lower antenna sensor (in half antenna configuration). Rf sensor 3 of a Tx is the Tx's upper antenna sensor (in half antenna configuration).
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.1.1.2Unsigned32 (1..6)not-accessiblecurrent
txRfSensorsNotificationIdx
OBJECT-TYPE
The notification number as below rsXx9TxNotifications. This is a helper column and therefore not-accessible.
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.1.1.3Unsigned32 (12000..12001)not-accessiblecurrent
txRfSensorsNotificationName
OBJECT-TYPE
The notification number as an enumeration. The enumeration correlates with the notifications under rsXx9TxNotifications.
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.1.1.4INTEGER {txRfSensorLinkStatus(12000), txRfSensorCalibrated(12001)}read-onlycurrent
txRfSensorsNotificationMask
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.1.1.5NotificationMaskread-writecurrent
txRfSensorsNotificationPriority
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.1.1.6NotificationPriorityread-writecurrent
txRfSensorsNotificationState
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.1.1.7NotificationStateread-onlycurrent
txRfSensorsTable
OBJECT-TYPE
Transmitter Antenna Rf threshold configuration and status.
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.2not-accessiblecurrent
txRfSensorsEntry
OBJECT-TYPE
An entry in the txRfSensorsTable.
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.2.1not-accessiblecurrent
txRfLimitForwardFail
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.2.1.1Integer32 (-4000..0)read-writecurrent
txRfLimitForwardWarn
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.2.1.2Integer32 (-4000..0)read-writecurrent
txRfLimitReflectedFail
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.2.1.3Integer32 (-1700..-600)read-writecurrent
txRfLimitReflectedWarn
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.2.1.4Integer32 (-2800..-1700)read-writecurrent
txRfLimitForwardPercentFailUpper
OBJECT-TYPE
Description. only valid for antennaRfProbe
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.2.1.5Unsigned32 (1..1000)read-writecurrent
txRfLimitForwardPercentFailLower
OBJECT-TYPE
Description. only valid for antennaRfProbe
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.2.1.6Integer32 (-990..1)read-writecurrent
txRfLimitForwardPercentWarnUpper
OBJECT-TYPE
Description. only valid for antennaRfProbe
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.2.1.7Unsigned32 (1..100)read-writecurrent
txRfLimitForwardPercentWarnLower
OBJECT-TYPE
Description. only valid for antennaRfProbe
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.2.1.8Integer32 (-990..1)read-writecurrent
txRfLimitReflectedVswrFail
OBJECT-TYPE
Description. only valid for antennaRfProbe
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.2.1.9Integer32 (1330..3000)read-writecurrent
txRfLimitReflectedVswrWarn
OBJECT-TYPE
Description. only valid for antennaRfProbe
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.2.1.10Integer32 (1080..1330)read-writecurrent
txRfCmdForwardFailTimeout
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.2.1.11Unsigned32 (0..60)read-writecurrent
txRfStForwardPercent
OBJECT-TYPE
Description. only valid for antennaRfProbe
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.2.1.12Unsigned32 (0..2000)read-onlycurrent
txRfStReflectedVswr
OBJECT-TYPE
Description. A value of 0 means: invalid only valid for antennaRfProbe
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.2.1.13Integer32 (0 | 100..1000)read-onlycurrent
txRfStForward
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.2.1.14Unsigned32read-onlycurrent
txRfStReflected
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.2.1.15Unsigned32read-onlycurrent
txRfIdentify
OBJECT-TYPE
Identifies the power sensor to which a calibrated power meter has to be connected. When this button is pushed, a green LED on the power sensor will start flashing. Looking into the rack from the reverse, the flashing LED will mark the position of the power sensor. The LED automatically stops blinking after thirty seconds.
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.2.1.16Triggerread-writecurrent
txRfCalibrate
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.2.1.17Triggerread-writecurrent
txRfUncalibrate
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.2.1.18Triggerread-writecurrent
txRfLimitForwardAddUpperFail
OBJECT-TYPE
Description. only valid for additional probes.
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.2.1.19Integer32 (-1000..1000)read-writecurrent
txRfLimitForwardAddUpperWarn
OBJECT-TYPE
Description. only valid for additional probes.
1.3.6.1.4.1.2566.127.1.2.216.3.1.13.2.1.20Integer32 (-2000..1000)read-writecurrent
rsXx9TxConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.3.2
rsXx9TxCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.3.2.1
rsXx9TxGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.3.2.2

Notifications

NameOIDStatus
txSummary
NOTIFICATION-TYPE
Transmitter summary state. Possible values: fault(3) warning(4) ok(5) Notification class: fault
1.3.6.1.4.1.2566.127.1.2.216.3.0.1current
txRF
NOTIFICATION-TYPE
indicates a warning/fault if RF power falls below the adjusted warning/fault limit. Possible values: off(2) fault(3) warning(4) ok(5) Notification class: fault
1.3.6.1.4.1.2566.127.1.2.216.3.0.2current
txReflection
NOTIFICATION-TYPE
The reflected RF is above warning or fault limit. Possible values: off(2) fault(3) warning(4) ok(5) Notification class: fault
1.3.6.1.4.1.2566.127.1.2.216.3.0.3current
txRfSensorSummary
NOTIFICATION-TYPE
RF sensor summary state. Possible values: off(2) fault(3) warning(4) ok(5) Notification class: fault
1.3.6.1.4.1.2566.127.1.2.216.3.0.4current
txLocal
NOTIFICATION-TYPE
local/remote state of transmitter. Possible values: off(2) - remote ok(5) - local Notification class: info
1.3.6.1.4.1.2566.127.1.2.216.3.0.5current
txExciterAutomaticOn
NOTIFICATION-TYPE
Shows whether the exciter automatic is activated. Possible values: off(2) - not activated ok(5) - activated Notification class: info
1.3.6.1.4.1.2566.127.1.2.216.3.0.6current
txExciterAutomaticReady
NOTIFICATION-TYPE
Indicates whether the automatic exciter switchover function is ready. off(2) - not ready: The standby exciter is not operational, the transmitter is switched off, the automatic switchover function already switched over or there is a defect in the exciter switch. ok(5) - ready: The automatic switchover function is operational. Notification class: info
1.3.6.1.4.1.2566.127.1.2.216.3.0.7current
txExciterAutomaticSwitchedOver
NOTIFICATION-TYPE
Indicates whether the exciter automatic switched to a reserve exciter. Possible values: off(2) - not switched warning(4) - switched Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.8current
txExciterAutomaticRfSwitchSummary
NOTIFICATION-TYPE
RF switch summary state. Indicates that the exciter switch does not work properly. Check the two CAN-bus cables between exciter switch and TCE900-Exciter A and B. Whether the cabling is ok the exciter switch has to be replaced. Possible values: ok(5)
1.3.6.1.4.1.2566.127.1.2.216.3.0.9current
txExciterAutomaticSummary
NOTIFICATION-TYPE
the sum state of the exciter automatic Possible values: off(2) - automatic off fault(3) - automatic fail or RfSwitch not connected warning(4) - switchover occurred ok(5) - ready Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.10current
txActiveReserveExcAutoOn
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.0.1000current
txActiveReserveExcAutoReady
NOTIFICATION-TYPE
Indicates whether the automatic exciter switchover function is ready. ok(5) - Ready: The automatic switchover function is operational. off(2) - Not Ready: The standby exciter is not operational, the transmitter is switched off, the automatic switchover function already switched over or there is a defect in the exciter switch.
1.3.6.1.4.1.2566.127.1.2.216.3.0.1001current
txActiveReserveExcAutoSwitchedOver
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.0.1002current
txActiveReserveExcAutoRfSwitchSummary
NOTIFICATION-TYPE
Indicates whether the exciter switch is working. If a switchover to the standby exciter fails, an error is displayed.
1.3.6.1.4.1.2566.127.1.2.216.3.0.1003current
txActiveReserveExcAutoSummary
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.0.1004current
txActiveReserveOstAutoOn
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.0.1500current
txActiveReserveOstAutoReady
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.0.1501current
txActiveReserveOstAutoSwitchedOver
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.0.1502current
txActiveReserveOstAutoRfSwitchSummary
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.0.1503current
txActiveReserveOstAutoSummary
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.0.1504current
txExciterSummary
NOTIFICATION-TYPE
Exciter summary state. Possible values: off(2) fault(3) warning(4) ok(5) Notification class: fault
1.3.6.1.4.1.2566.127.1.2.216.3.0.2000current
txExciterLoop
NOTIFICATION-TYPE
Indicates whether the protection loop is open. Possible values: warning(4) - loop is open ok(5) - loop is closed Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.2001current
txExciterMute
NOTIFICATION-TYPE
Indicates whether the RF output of the exciter is muted. Possible values: warning(4) - mute ok(5) - no mute Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.2002current
txExciterOutputConnect
NOTIFICATION-TYPE
Indicates whether a RF connection between exciter output and amplifier input exists. Possible values: fault(3) - no connection ok(5) Notification class: fault
1.3.6.1.4.1.2566.127.1.2.216.3.0.2003current
txExciterRfState
NOTIFICATION-TYPE
Indicates whether a RF signal with sufficient level is output. Possible values: off(2) - no signal fault(3) - signal level lower fault limit warning(4) - signal level lower warning limit ok(5) - signal level ok Notification class: fault
1.3.6.1.4.1.2566.127.1.2.216.3.0.2004current
txInpIfLogState
NOTIFICATION-TYPE
State of logical input. Indicates whether a valid serial data stream is being fed to the transmitter. Possible values: off(2) - no signal fault(3) warning(4) ok(5) Notification class: fault
1.3.6.1.4.1.2566.127.1.2.216.3.0.3000current
txInpIfLogInfoPacket
NOTIFICATION-TYPE
state of the information packet (MIP, IIP or TCP: depends on transmitting standard). Possible values: off(2) - fault(3) warning(4) ok(5) Notification class: fault
1.3.6.1.4.1.2566.127.1.2.216.3.0.3001current
txInpIfLogPacketLength
NOTIFICATION-TYPE
Indicates whether the detected packet length can be used. Possible values: off(2) warning(4) ok(5) Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.3002current
txInpIfIpState
NOTIFICATION-TYPE
Indicates whether a valid data stream is fed to the transmitter via the IP feed. If an error is indicated, check the settings of the IP stream and the Ethernet interface. Possible values: off(2) - no stream fault(3) warning(4) ok(5) Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.3003current
txInpIfIpInfoPacket
NOTIFICATION-TYPE
Indicates the state of the information packet. Possible values: off(2) - fault(3) warning(4) ok(5) Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.3004current
txInpIfIpPacketLength
NOTIFICATION-TYPE
Indicates whether the detected packet length can be used. Possible values: warning(4) ok(5) Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.3005current
txInpIfTsState
NOTIFICATION-TYPE
Indicates whether a valid serial data stream is fed to the transmitter via TS1/2 IN (X20/X21). If an error is displayed here, first check the setting of the TS type (ASI/SMPTE). Possible values: off(2) - no stream fault(3) warning(4) ok(5) Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.3006current
txInpIfTsInfoPacket
NOTIFICATION-TYPE
Indicates whether the control information required for SFN mode is contained in the data stream. The displayed name depends on the modulation standard. An error can also be displayed in MFN mode if the coder settings are to be controlled automatically via the transport stream. Possible values: off(2) - not required fault(3) warning(4) ok(5) Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.3007current
txInpIfTsPacketLength
NOTIFICATION-TYPE
Indicates whether the detected packet length cannot be used. Possible values: warning(4) ok(5) Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.3008current
txInpIfLogDatarateBufferUnderrun
NOTIFICATION-TYPE
Indicates a too low datarate at this Input. In SFNs the datarate is defined by the coder settings. In MFNs the Input datarate might be lower, but must not exceed the minimum defined datarate by coder settings over a longer period. Possible values: off(2) warning(4) ok(5) Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.3009current
txInpIfLogDatarateBufferOverflow
NOTIFICATION-TYPE
Indicates a too high datarate at this Input. In SFNs the datarate is defined by the coder settings. In MFNs the Input datarate must not exceed the maximum defined datarate by coder settings over a longer period. Possible values: off(2) warning(4) ok(5) Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.3010current
txInpIfSatInputState
NOTIFICATION-TYPE
Indicates whether a valid data stream is fed to the transmitter via the SAT feed. Possible values: off(2) - no stream fault(3) warning(4) ok(5)
1.3.6.1.4.1.2566.127.1.2.216.3.0.3011current
txInpIfSatInfoPacket
NOTIFICATION-TYPE
Indicates the state of the information packet. Possible values: off(2) - not required fault(3) warning(4) ok(5)
1.3.6.1.4.1.2566.127.1.2.216.3.0.3012current
txInpIfSatPacketLength
NOTIFICATION-TYPE
Indicates whether the detected packet length cannot be used. Possible values: warning(4) ok(5)
1.3.6.1.4.1.2566.127.1.2.216.3.0.3013current
txInpIfSatTransponderLocked
NOTIFICATION-TYPE
Indicates if the DVB-S/S2 Receiver has locked to a signal. Possible values: warning(4) ok(5)
1.3.6.1.4.1.2566.127.1.2.216.3.0.3014current
txInpIfSatIpOutput
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.0.3015current
txInpIfSatReceiverState
NOTIFICATION-TYPE
Description. Possible values: off(2) fault(3) warning(4) ok(5)
1.3.6.1.4.1.2566.127.1.2.216.3.0.3016current
txInpIfSatBtsStatus
NOTIFICATION-TYPE
Description. Possible values: off(2) fault(3) option not installed(4) ok(5) Notification class: info
1.3.6.1.4.1.2566.127.1.2.216.3.0.3017current
txInpIfSatDriftStatus
NOTIFICATION-TYPE
Indicates a warning when the difference between transponder frequency and receive frequency (tuner frequency) is too high. Possible values: off(2) warning(4) ok(5)
1.3.6.1.4.1.2566.127.1.2.216.3.0.3018current
txInpIfSatLinkMarginStatus
NOTIFICATION-TYPE
Indicates whether the attenuation is low enough for failure-free operation. The thresholds for generating a warning or a fault can be adjusted. Possible values: off(2) fault(3) warning(4) ok(5)
1.3.6.1.4.1.2566.127.1.2.216.3.0.3019current
txInpIfSatCarrierNoiseStatus
NOTIFICATION-TYPE
Indicates whether the current carrier to noise ratio is below the warning limit. Possible values: off(2) fault(3) warning(4) ok(5)
1.3.6.1.4.1.2566.127.1.2.216.3.0.3020current
txInpIfSatStreamTsIdMatch
NOTIFICATION-TYPE
Indicates whether the current TS ID is equal to the expected TS ID. Changing the ID in transport stream leads to a warning. Setting the expected TS ID to zero suppresses a warning.
1.3.6.1.4.1.2566.127.1.2.216.3.0.3021current
txInpAuto1Active
NOTIFICATION-TYPE
Shows whether input1 or input2 is used for RF modulation. Possible values: off(2) - input2 is active ok(5) - input1 is active Notification class: info
1.3.6.1.4.1.2566.127.1.2.216.3.0.4000current
txInpAutoState
NOTIFICATION-TYPE
Indicates the state of the automatic input signal switchover function. Possible values: off(2) - The automatic switchover function is not enabled. warning(4) - The automatic switchover function has switched over from the preferred input to the standby input. ok(5) - The automatic switchover function is ready to switch the current input over to the input currently not in use as soon as the input signal of the current input fails. Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.4001current
txFrqRegSummary
NOTIFICATION-TYPE
Indicates the state of the reference used. In single-frequency networks, a failure of the reference can cause a malfunction and thus replacement of the exciter. Possible values: off(2) - txFrqRegSetupSource is manual(1) fault(3) warning(4) ok(5) Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.5000current
txFrqRegCurrentSource
NOTIFICATION-TYPE
Quality of current reference source. Possible values: off(2) - no signal fault(3) - missing warning(4) - inaccurate ok(5) - good Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.5001current
txFrqRegSourceExtRef
NOTIFICATION-TYPE
Indicates whether a reference signal is present at the REF_IN (X64) jack at the TCE. Possible values: off(2) - no signal fault(3) - missing warning(4) - inaccurate ok(5) - good Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.5002current
txFrqRegSourceExtPPS
NOTIFICATION-TYPE
Indicates whether a seconds pulse is present at the 1PPS_IN (X23) jack at the TCE. Possible values: off(2) - no signal fault(3) - missing warning(4) - inaccurate ok(5) - good Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.5003current
txFrqRegSourceIntGPS
NOTIFICATION-TYPE
Quality of the internal GPS reference source. Possible values: off(2) - no signal fault(3) - missing warning(4) - inaccurate ok(5) - good Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.5004current
txSfnSummary
NOTIFICATION-TYPE
Time synchronization summary. Contains: time reference, time information, mode state Possible values: off(2) warning(4) ok(5) - on Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.6000current
txPrecorrLinSummary
NOTIFICATION-TYPE
Linear precorrection summary state. Possible values: off(2) warning(4) ok(5) Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.8000current
txPrecorrNonLinSummary
NOTIFICATION-TYPE
Non linear precorrection summary state. Possible values: off(2) warning(4) ok(5) Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.8001current
txPrecorrMerState
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.0.8002current
txOstSummary
NOTIFICATION-TYPE
Output stage summary state. Possible values: off(2) fault(3) warning(4) ok(5) Notification class: fault
1.3.6.1.4.1.2566.127.1.2.216.3.0.9000current
txAmpSummary
NOTIFICATION-TYPE
Amplifier summary state. Possible values: off(2) fault(3) warning(4) ok(5) Notification class: fault
1.3.6.1.4.1.2566.127.1.2.216.3.0.10000current
txAmpRfPowerFail
NOTIFICATION-TYPE
Indicates that the output power of the amplifier is more than 3 dB below the reference value. Possible values: off(2) - RF power ok fault(3) - the output power of the amplifier is more than 3 dB below the reference value. Notification class: fault
1.3.6.1.4.1.2566.127.1.2.216.3.0.10001current
txAmpReflection
NOTIFICATION-TYPE
Indicates whether reflection at the RF output is becoming too great. In this case, the antenna as well as the link between the amplifiers and the antenna via the combiners and output-stage switches (if present) must be checked. Possible values: off(2) warning(4) - reflection at the RF output is too great Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.10002current
txAmpSupplyFail
NOTIFICATION-TYPE
Indicates whether the internal power supply units are functioning correctly. Possible values: off(2) - internal power supply units are functioning correctly fault(3) Notification class: fault
1.3.6.1.4.1.2566.127.1.2.216.3.0.10003current
txAmpRfInFail
NOTIFICATION-TYPE
Indicates that the amplifier is receiving an input signal, the level of which is too low. - If this message occurs at all amplifiers at the same time, the fault is located at the exciter switch, splitter or exciter. - If this fault occurs at only some of the amplifiers, the output level of the exciters and splitter must be checked. - If the fault occurs at only one amplifier, the self-engaging connector of the RF signal on the rear panel of the amplifier must be checked for mechanical damage. Possible values: off(2) warning(4) - the amplifier is receiving an input signal, the level of which is too low Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.10004current
txAmpMute
NOTIFICATION-TYPE
Indicates that the amplifier is suppressing its output signal. This indicator appears in the following cases: - No input signal - During bias adjustment - An external absorber signals that it is overheating. Possible values: off(2) warning(4) - the amplifier is suppressing its output signal Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.10005current
txAmpTemperatureFail
NOTIFICATION-TYPE
Indicates that the amplifier is overheating internally. - With liquid-cooled amplifiers, this fault can occur if the stop valves have been closed inadvertently. - With air-cooled amplifiers, it must be checked whether the air inflow or outflow is obstructed or the inflow air temperature is too high. Possible values: off(2) fault(3) - the amplifier is overheating internally Notification class: fault
1.3.6.1.4.1.2566.127.1.2.216.3.0.10006current
txAmpTransistorFail
NOTIFICATION-TYPE
Indicates that one or more driver or power transistors are defective. Only personnel with the relevant special service training are permitted to change the transistors. Possible values: off(2) fault(3) - one or more driver or power transistors are defective Notification class: fault
1.3.6.1.4.1.2566.127.1.2.216.3.0.10007current
txAmpRegulationFail
NOTIFICATION-TYPE
This error occurs if the internal power regulation of the amplifier reaches the limit of its control range. This indicates one or more defective power transistors. Possible values: off(2) fault(3) - the internal power regulation of the amplifier reaches the limit of its control range Notification class: fault
1.3.6.1.4.1.2566.127.1.2.216.3.0.10008current
txAmpAcFail
NOTIFICATION-TYPE
indicates if one of the power supplies are faulty. A fault can only be indicated if the RF of transmitter is switched on (Program=On). Possible values: off(2) warning(4) - one of the power supplies is faulty Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.10009current
txAmpDcFail
NOTIFICATION-TYPE
Indicates whether one of the internal power supply units of the amplifier is faulty (e.g. no DC voltage is being delivered). Detection of a fault is only possible if the RF of the transmitter has been switched on (Program=On). Possible values: off(2) fault(3) - one of the internal power supply units of the amplifier is faulty Notification class: fault
1.3.6.1.4.1.2566.127.1.2.216.3.0.10010current
txAmpDriverFail
NOTIFICATION-TYPE
indicates that the driver transistors are damaged. If this error occurs the amplifier has to be repaired by trained service personnel Possible values: off(2) fault(3) - the driver transistors are damaged Notification class: fault
1.3.6.1.4.1.2566.127.1.2.216.3.0.10011obsolete
txAmpBiasFail
NOTIFICATION-TYPE
Indicates a fault if the quiescent current of one or more transistors cannot be adjusted. Possible values: off(2) - Amplifier error: There is a technical fault in the amplifier; the amplifier should be replaced. fault(3) - Adjustment has been aborted because a constant temperature has not settled in the amplifier. In this case, adjustment should be started again immediately after the fault has occurred. warning(4) - Adjust error: There is a technical fault in the amplifier; the amplifier should be replaced. ok(5) - Automatic quiescent current adjustment has been performed properly. Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.10013current
txAmpInitFail
NOTIFICATION-TYPE
Indicates a fault if the amplifier detects an internal fault at power ON. If other faults are indicated at the same time, the cause of these faults must be rectified first. If the InitFail fault still exists after other faults have been rectified, the amplifier must be replaced. Possible values: off(2) fault(3) - the amplifier detects an internal fault at power ON Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.10014current
txAmpAbsorberFail
NOTIFICATION-TYPE
This warning is shown if overheating of a rack absorber is detected. Normally, this warning is signaled by all amplifiers of a transmitter simultaneously. If the warning is signaled by only one amplifier, check the rack wiring. Possible values: off(2) warning(4) - overheating of a rack absorber is detected Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.10015current
txAmpOn
NOTIFICATION-TYPE
Indicates whether the amplifier has been switched on or off. Possible values: off(2) ok(5) Notification class: fault
1.3.6.1.4.1.2566.127.1.2.216.3.0.10016current
txAmpBlocking
NOTIFICATION-TYPE
Possible values: off(2) fault(3) Notification class: fault
1.3.6.1.4.1.2566.127.1.2.216.3.0.10017current
txSwiCoSummary
NOTIFICATION-TYPE
shows state of Switchless Combiner Possible values: off(2) warn(4) ok(5) Notification class: fault
1.3.6.1.4.1.2566.127.1.2.216.3.0.11000current
txSwiCoHwWarn
NOTIFICATION-TYPE
Indicates whether the switchless combiner signals a warning. This indication is identical to the indication on the control panel of the switchless combiner. Possible values: off(2) - no connection to RCB warn(4) - no connection to potentiometer ok(5) - OK Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.11002current
txSwiCoHwFault
NOTIFICATION-TYPE
Indicates whether the switchless combiner signals an error. This indication is identical to the indication on the control panel of the switchless combiner. Possible values: off(2) - no connection to RCB warn(4) - no connection to potentiometer ok(5) - OK Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.11003current
txSwiCoHwLocal
NOTIFICATION-TYPE
Indicates whether the switchless combiner is in Local mode or Remote mode. For the control to work, the switchless combiner has to be in Remote mode. Possible values: off(2) - no connection to RCB warn(4) - switchless combiner in local state ok(5) - OK, switchless combiner in remote state Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.11004current
txSwiCoRcbFail
NOTIFICATION-TYPE
Indicates whether the redundancy control board in the TCE900 system control functions without errors. Possible values: fault(3) warning(4) ok(5) Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.11005current
txSwiCoRfProbeFail
NOTIFICATION-TYPE
Indicates whether the test point at the antenna output functions. Possible values: fault(3) warning(4) - warning or no link ok(5) Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.11006current
txSwiCoRegulationSummary
NOTIFICATION-TYPE
shows the regulation state of Switchless Combiner Possible values: fault(3) warning(4) - warning or no link ok(5) Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.11007current
txRfSensorLinkStatus
NOTIFICATION-TYPE
A communication fault to RF Sensor is detected. The CAN bus connection between sensor and TCE900 should be checked. Possible values: fault(3) - not connected ok(5) - ok Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.3.0.12000current
txRfSensorCalibrated
NOTIFICATION-TYPE
The RF sensor is not calibrated. In multi-standard transmitters the rf sensor has to be calibrated for each tv standard seperately
1.3.6.1.4.1.2566.127.1.2.216.3.0.12001current

Conformance

NameOIDStatus
txBasicCompliance
MODULE-COMPLIANCE
The compliance statement for XX9000 TV transmitters.
1.3.6.1.4.1.2566.127.1.2.216.3.2.1.1current
txBand2Compliance
MODULE-COMPLIANCE
The compliance statement for XX9000 band II transmitters.
1.3.6.1.4.1.2566.127.1.2.216.3.2.1.2current
txObjsTransmitter
OBJECT-GROUP
General transmitter objects group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.1current
txObjsExciter
OBJECT-GROUP
Exciter objects group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.2current
txObjsInputInterfaces
OBJECT-GROUP
Input interface objects group. in case of a missing physical input connector or missing option key, changes to objects in this group might be ignored.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.3current
txObjsInputTsFeed
OBJECT-GROUP
Input TS feed objects group. in case of a missing physical input connector or missing option key, changes to objects in this group might be ignored.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.4current
txObjsInputAutomatic
OBJECT-GROUP
Input automatic objects group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.5current
txObjsFrequencyRegulation
OBJECT-GROUP
Frequency regulation objects group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.6current
txObjsSFN
OBJECT-GROUP
SFN objects group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.7current
txObjsPrecorrection
OBJECT-GROUP
Precorrection objects group. also see txObjsLinPrecorrection, txObjsNonLinPrecorrection and txObjsPrecorrectionCfr objects groups.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.8current
txObjsOutputStage
OBJECT-GROUP
Output stage objects group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.9current
txObjsAmplifier
OBJECT-GROUP
Common high-power (PHx) and medium-power (PMx) amplifier objects group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.10current
txObjsSwitchlessCombiner
OBJECT-GROUP
Common switchless combiner objects group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.11current
txObjsActiveReserve
OBJECT-GROUP
Common active reserve objects group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.12current
txObjsInputSatFeed
OBJECT-GROUP
Common SAT receiver objects group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.13current
txObjsPreset
OBJECT-GROUP
Preset related objects.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.14current
txObjsRfSensors
OBJECT-GROUP
RF Sensor objects
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.15current
txNotifyTransmitter
NOTIFICATION-GROUP
General transmitter notifications group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.101current
txNotifyExciter
NOTIFICATION-GROUP
Exciter notifications group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.102current
txNotifyInputInterfaces
NOTIFICATION-GROUP
Input interface notifications group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.103current
txNotifyInputTsFeed
NOTIFICATION-GROUP
Input TS feed notifications group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.104current
txNotifyInputAutomatic
NOTIFICATION-GROUP
Input automatic notifications group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.105current
txNotifyFrequencyRegulation
NOTIFICATION-GROUP
Frequency regulation notifications group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.106current
txNotifySFN
NOTIFICATION-GROUP
SFN notifications group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.107current
txNotifyPrecorrection
NOTIFICATION-GROUP
Precorrection notifications group. obsoleted. check txNotifyLinPrecorrection and txNotifyNonLinPrecorrection notifications groups instead.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.108current
txNotifyOutputStage
NOTIFICATION-GROUP
Output stage notifications group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.109current
txNotifyAmplifier
NOTIFICATION-GROUP
High-power (PHx) and medium-power (PMx) amplifier notifications group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.110current
txNotifySwitchlessCombiner
NOTIFICATION-GROUP
Switchless Combiner notifications group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.111current
txNotifyActiveReserve
NOTIFICATION-GROUP
Active Reserve notifications group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.112current
txNotifyInputSatFeed
NOTIFICATION-GROUP
SAT receiver notifications group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.113current
txNotifyRfSensors
NOTIFICATION-GROUP
Rf sensor notifications group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.114current
txNotifyPaTLx
NOTIFICATION-GROUP
Tlx power amplifier notifications group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.115current
txObjsExciterAutomatic
OBJECT-GROUP
Exciter automatic objects group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.201current
txObjsDualDrive
OBJECT-GROUP
DualDrive and BackupDrive configuration objects.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.202current
txObjsSFN1
OBJECT-GROUP
SFN objects for DVB-T, ISDB-T, DTMB, ATSC only.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.203current
txObjsSFN2
OBJECT-GROUP
SFN objects not for ISDB-T.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.204current
txObjsPMx
OBJECT-GROUP
PMU and PMV specific objects
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.205current
txObjsNonFM
OBJECT-GROUP
Objects for all modulation modes except FM.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.207current
txObjsPHR901
OBJECT-GROUP
PHR901 specific objects
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.208current
txObjsNonBand2
OBJECT-GROUP
Non band II objects.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.209current
txObjsPMV901
OBJECT-GROUP
PMV901 specific objects
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.210current
txObjsPMU901
OBJECT-GROUP
PMU901 specific objects
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.211current
txObjsPHx902
OBJECT-GROUP
PHU902, PHU903 and PHV902 specific objects
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.212current
txObjsNonAtv
OBJECT-GROUP
Non ATV objects.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.213current
txObjsTransparentTs
OBJECT-GROUP
Transparent TS objects. (DVB-T only)
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.214current
txObjsNonAnalog
OBJECT-GROUP
Non FM or ATV objects.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.215current
txObjsDvbt2
OBJECT-GROUP
DVB-T2 specific objects.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.216current
txObjsPaTlx
OBJECT-GROUP
TLx power amplifier specific objects.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.217current
txObjsPHU901
OBJECT-GROUP
PHU901 specific objects.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.218current
txObjsPMU905
OBJECT-GROUP
PMU905 specific objects
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.219current
txObjsLinPrecorrection
OBJECT-GROUP
Linear precorrection objects group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.220current
txObjsNonLinPrecorrection
OBJECT-GROUP
Nonlinear precorrection objects group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.221current
txObjsPrecorrectionCfr
OBJECT-GROUP
Crest factor reduction objects group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.222current
txObjsInputExgine
OBJECT-GROUP
Description.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.223current
txObjsSignalQuality
OBJECT-GROUP
Signal Quality objects group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.224current
txObjsDigitalHighPower
OBJECT-GROUP
Non TLx objects (THx, TMx) and non Band-II.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.225current
txObjsOutputStageNonTlx
OBJECT-GROUP
Output stage objects group for medium and high power.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.226current
txNotifyExciterAutomatic
NOTIFICATION-GROUP
Exciter automatic notifications group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.300current
txNotifyLinPrecorrection
NOTIFICATION-GROUP
Linear precorrection notifications group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.301current
txNotifyNonLinPrecorrection
NOTIFICATION-GROUP
Nonlinear precorrection notifications group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.302current
txNotifySignalQuality
NOTIFICATION-GROUP
Signal quality notifications group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.303current
txObjsPMxObsoleted
OBJECT-GROUP
obsolete PMU and PMV specific objects
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.400obsolete
txObjsPHxObsoleted
OBJECT-GROUP
obsolete PHU and PHV specific objects
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.401obsolete
txObjsInputAutomaticObsoleted
OBJECT-GROUP
obsolete Input automatic objects group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.402obsolete
txObjsAmplifierObsoleted
OBJECT-GROUP
obsolete common amplifier objects group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.403obsolete
txObjsInputSatFeedObsoleted
OBJECT-GROUP
obsoleted SAT receiver notifications group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.404obsolete
txObjsPrecorrectionObsoleted
OBJECT-GROUP
Obsoleted precorrection objects group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.405obsolete
txNotifyAmplifierObsoleted
NOTIFICATION-GROUP
obsolete Amplifier Notification group.
1.3.6.1.4.1.2566.127.1.2.216.3.2.2.500obsolete