RS-XX9-DVBT-MIB
- Registered at
- 1.3.6.1.4.1.2566.127.1.2.216.6.01.3.6.1.4.1.2566.127.1.2.216.6.11.3.6.1.4.1.2566.127.1.2.216.6.21.3.6.1.4.1.2566.149.1.216.6
- Last updated
- 2014-12-22 16:00
- Organization
- Rohde&Schwarz GmbH & Co. KG
- Revisions
- 2014-12-22 16:00, 2014-02-05 16:00, 2012-02-23 08:00
- Namespace
- rs
- Source file
RS-XX9-DVBT-MIB- Digest
sha256:a99f5e23a510089b1d5f13e66ebfca3cf68fc01f357c5d56c35c2ab1a21c2cff
Description
This MIB defines DVB-T specific objects of XX9000 transmitting systems from Rohde & Schwarz. The following MIBs are related to this: - RS-COMMON-MIB - mandatory for this MIB - RS-XX9-SMI-MIB - mandatory for this MIB - RS-XX9-TC-MIB - mandatory for this MIB - RS-XX9-COMMON-MIB - mandatory for this MIB
Contact
Rohde & Schwarz GmbH & Co. KG Broadcasting Division Muehldorfstrasse 15 81671 Munich Germany customersupport@rohde-schwarz.com
Imports
| From | Symbols |
|---|---|
| RS-XX9-COMMON-MIB | commonNotificationAlarmClass |
| RS-XX9-SMI-MIB | rsXx9DvbT, rsXx9MibModule |
| RS-XX9-TC-MIB | IndexAB, IndexTransmitter, NotificationMask, NotificationPriority, NotificationState, SwitchOnOff |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ENTITY-MIB IANA-ENTITY-MIB INET-ADDRESS-MIB RS-COMMON-MIB RS-XX9-COMMON-MIB RS-XX9-DVBT-MIB RS-XX9-SMI-MIB RS-XX9-TC-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC UUID-TC-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| DvbtChannelBandwidth TEXTUAL-CONVENTION mhz5(4) - 5 MHz mhz6(5) - 6 MHz mhz7(6) - 7 MHz mhz8(7) - 8 MHz | current | |||
| DvbtCodeRate TEXTUAL-CONVENTION The code rate sets the ratio between payload and error correction information. | current | |||
| DvbtFftSize TEXTUAL-CONVENTION FFT size: k2(3) - the OFDM signal is modulated on 1705 sub-carriers k8(4) - 6817 subcarriers are used k4(4) - only for DVB-H | current | |||
| DvbtGuardInterval TEXTUAL-CONVENTION Guard interval. oneDiv32(2) -> 1/32 oneDiv16(3) -> 1/16 oneDiv8(4) -> 1/8 oneDiv4(5) -> 1/4 | current | |||
| DvbtInterleave TEXTUAL-CONVENTION Process according to which the bit interleaver interleaves its data. Meaningful only for DVBT-H. | current | |||
| DvbtModulation TEXTUAL-CONVENTION qpsk(4) - is very fail safe but only allows low data rate. qam64(6) - 64 QAM can transport a huge amount of data in good radio reception environments | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| rsXx9DvbtNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.2566.127.1.2.216.6.0 | |||
| rsXx9DvbtObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2566.127.1.2.216.6.1 | |||
| dvbtStatus OBJECT-IDENTITY | 1.3.6.1.4.1.2566.127.1.2.216.6.1.1 | |||
| dvbtStatusNotificationTable OBJECT-TYPE The context information/configuration for the DVB-T status notifications. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.1.1 | not-accessible | current | |
| dvbtStatusNotificationEntry OBJECT-TYPE An entry in the dvbtStatusNotificationTable. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.1.1.1 | not-accessible | current | |
| dvbtStatusNotificationTxIdx OBJECT-TYPE The transmitter index. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.1.1.1.1 | IndexTransmitter | not-accessible | current |
| dvbtStatusNotificationExcIdx OBJECT-TYPE This index distinguishes the exiters. Necessary if you have dual drive transmitters. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.1.1.1.2 | IndexAB | not-accessible | current |
| dvbtStatusNotificationIdx OBJECT-TYPE The notification number as below rsXx9DvbtNotifications. This is a helper column and therefore not-accessible. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.1.1.1.3 | Unsigned32 (1..2) | not-accessible | current |
| dvbtStatusNotificationName OBJECT-TYPE The notification number as an enumeration. The enumeration correlates with the notifications under rsXx9DvbtNotifications. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.1.1.1.4 | INTEGER {dvbtEncoderSummary(1), dvbtTest(2)} | read-write | current |
| dvbtStatusNotificationMask OBJECT-TYPE See textual convention for details. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.1.1.1.5 | NotificationMask | read-write | current |
| dvbtStatusNotificationPriority OBJECT-TYPE See textual convention for details. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.1.1.1.6 | NotificationPriority | read-write | current |
| dvbtStatusNotificationState OBJECT-TYPE See textual convention for details. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.1.1.1.7 | NotificationState | read-only | current |
| dvbtStateTable OBJECT-TYPE DVB-T state values. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.1.2 | not-accessible | current | |
| dvbtStateEntry OBJECT-TYPE An entry in the dvbtStateTable. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.1.2.1 | not-accessible | current | |
| dvbtStTxFrequencyOffset OBJECT-TYPE Number of Hertz by which this transmitter is to shift its transmission frequency relative to other transmitters of the DVB-T network. This value is configured via the MIP (megaframe initialization packet). | 1.3.6.1.4.1.2566.127.1.2.216.6.1.1.2.1.1 | Integer32 | read-only | current |
| dvbtStTxDelayOffset OBJECT-TYPE Time by which this transmitter is to shift the time of transmission of its signal relative to other transmitters of the DVB-T network. This value is configured via the MIP (megaframe initialization packet). | 1.3.6.1.4.1.2566.127.1.2.216.6.1.1.2.1.2 | Integer32 | read-only | current |
| dvbtStCellId OBJECT-TYPE shows if a Cell ID has been found in the transport stream, which matches the configured transmitter ID. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.1.2.1.3 | INTEGER {disabled(1), ok(2), notPresent(3), txControlDisabled(4), txAddressFail(5), mipFail(6)} | read-only | current |
| dvbtSetup OBJECT-IDENTITY | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2 | |||
| dvbtConfigurationTable OBJECT-TYPE General DVB-T configuration. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.1 | not-accessible | current | |
| dvbtConfigurationEntry OBJECT-TYPE An entry in the dvbtConfigurationTable. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.1.1 | not-accessible | current | |
| dvbtConfigurationTxIdx OBJECT-TYPE The transmitter index. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.1.1.1 | IndexTransmitter | not-accessible | current |
| dvbtConfigurationExcIdx OBJECT-TYPE This index distinguishes the exiters. Necessary if you have dual drive transmitters. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.1.1.2 | IndexAB | not-accessible | current |
| dvbtConfigurationModulationSource OBJECT-TYPE The source for the TPS (transmission parameter signaling) parameters is configured here. Possible sources are the MIP (megaframe initialization packet) or manually selected default settings. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.1.1.3 | INTEGER {undefined(1), mip(2), manual(3)} | read-write | current |
| dvbtConfigurationDigitalMode OBJECT-TYPE Selection of digital TV standard. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.1.1.4 | INTEGER {undefined(1), dvbT(2), dvbH(3)} | read-write | current |
| dvbtLocalizationTable OBJECT-TYPE DVB-T localization parameters. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.2 | not-accessible | current | |
| dvbtLocalizationEntry OBJECT-TYPE An entry in the dvbtLocalizationTable. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.2.1 | not-accessible | current | |
| dvbtLocalizationTxControl OBJECT-TYPE If set to on(2) and if dvbtLocalizationTxAddress is valid, the Cell ID, the frequency offset, and the delay offset from the MIP (megaframe initialization packet) are applied. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.2.1.1 | INTEGER {undefined(1), on(2), off(3)} | read-write | current |
| dvbtLocalizationTxAddress OBJECT-TYPE Transmitter address. Setting the transmitter address is a precondition to reading Tx information (transmitter-specific settings) from the MIP (Megaframe Initialization Packet). However, the information is used only if dvbtLocalizationTxControl is enabled. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.2.1.2 | Unsigned32 (0..65535) | read-write | current |
| dvbtLocalizationCellIdSource OBJECT-TYPE Selects the data source of the Cell ID. The signaling of the Cell ID can be switched off here. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.2.1.3 | INTEGER {undefined(1), mip(2), manual(3)} | read-write | current |
| dvbtLocalizationCellId OBJECT-TYPE Defines what Cell ID this transmitter should use according to Individual Addressing information. This value can be applied from the MIP (when dvbtLocalizationCellIdSource is set to mip(2)). However, the Cell ID can also be configured here manually if necessary (dvbtLocalizationCellIdSource set to manual(3)). | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.2.1.4 | Unsigned32 (0..65535) | read-write | current |
| dvbtModulationTable OBJECT-TYPE DVB-T modulation parameters. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.3 | not-accessible | current | |
| dvbtModulationEntry OBJECT-TYPE An entry in the dvbtModulationTable. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.3.1 | not-accessible | current | |
| dvbtModulationChannelBandwidth OBJECT-TYPE Channel bandwidth occupied by the DVB-T signal in the frequency spectrum. You can configure 5, 6, 7, or 8 MHz. The choice depends on the required bandwidth of the channel to be transmitted. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.3.1.3 | DvbtChannelBandwidth | read-write | current |
| dvbtModulationFftMode OBJECT-TYPE The FFT length corresponds to the number of carriers used. The setting depends on the customized decision concerning your DVB network.The OFDM signal is modeled at 2K on 1705 carriers and at 8K on 6817 carriers. The setting of 4K can be selected only for DVB-H. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.3.1.4 | DvbtFftSize | read-write | current |
| dvbtModulationGuardInterval OBJECT-TYPE The Guard Interval determines the time span between signals for multicarrier modulation, in which no information is transmitted. The larger the time span is, the lower the risk of interference and the lower the data transfer rate. The setting values are a fraction of the symbol period. Ideally, you select a value that is larger than the longest echo travel time of the system. Possible setting values are: 1/32, 1/16, 1/8, 1/4, whereby the risk of interference is greatest at 1/32, but the data transfer rate, in turn, is highest. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.3.1.5 | DvbtGuardInterval | read-write | current |
| dvbtModulationConstellation OBJECT-TYPE Sets up the modulation mode. QPSK is very fail-safe, but has only a small data rate. 64 QAM can transmit very large data rates if you expect few faults on the transmission link. 16 QAM is a compromise between the two other setting values. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.3.1.6 | DvbtModulation | read-write | current |
| dvbtModulationCodeRate OBJECT-TYPE With the code rate you can configure the relationship between user data and (error correction values+user data). Possible values are 1/2, 2/3, 3/4, 5/6, 7/8. The greatest error correction and the lowest data transfer rate are enabled by 1/2, and the lowest error correction and greatest data transfer rate are enabled by 7/8. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.3.1.7 | DvbtCodeRate | read-write | current |
| dvbtModulationMpeFEC OBJECT-TYPE Switches the forward error correction on or off. This parameter is operative for DVB-H only. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.3.1.8 | SwitchOnOff | read-write | current |
| dvbtModulationTimeSlicing OBJECT-TYPE The transmission of the payload in time slices is activated by this. It enables energy-efficient operation of the receivers, since these can disable their input stages during pauses in transmission. This parameter is operative for DVB-H only. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.3.1.9 | SwitchOnOff | read-write | current |
| dvbtModulationInterleave OBJECT-TYPE Process according to which the bit interleaver interleaves its data. This parameter is operative only for DVB-H. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.3.1.10 | DvbtInterleave | read-write | current |
| dvbtTestTable OBJECT-TYPE Configures the test mode of the exciter. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.4 | not-accessible | current | |
| dvbtTestEntry OBJECT-TYPE An entry in the dvbtTestTable. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.4.1 | not-accessible | current | |
| dvbtTestMode OBJECT-TYPE Which test signal is to be generated. off(1) - switches off test signal generation. prbs(2) - Generates a pseudo-random binary sequence insted of the payload. singleCarrier(3) - Generates an unmodulated single carrier. This test signal can be used to measure the phase noise of the synthesizer. mute1SymOfMegaFrame(6) - Suppresses the first symbol of each T2 frame. This function can be used to measure the time of signal transmission. The phase noise must be measured via the RF Monitor Out connector (X61). The cable connected to RF Out (X60) must be removed. In order to protect the amplifiers, this test signal is only generated if the output of the exciter is open. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.2.4.1.1 | INTEGER {off(1), prbs(2), singleCarrier(3), mute1P1SymOfSuperFrame(6)} | read-write | current |
| dvbtOutput OBJECT-IDENTITY | 1.3.6.1.4.1.2566.127.1.2.216.6.1.3 | |||
| dvbtOutLocalizationTable OBJECT-TYPE Currently active DVB-T localization parameters. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.3.2 | not-accessible | current | |
| dvbtOutLocalizationEntry OBJECT-TYPE An entry in the dvbtOutLocalizationTable. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.3.2.1 | not-accessible | current | |
| dvbtOutLocalizationCellId OBJECT-TYPE The currently used cell ID. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.3.2.1.4 | Unsigned32 | read-write | current |
| dvbtOutModulationTable OBJECT-TYPE Currently active DVB-T modulation parameters. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.3.3 | not-accessible | current | |
| dvbtOutModulationEntry OBJECT-TYPE An entry in the dvbtOutModulationTable. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.3.3.1 | not-accessible | current | |
| dvbtOutModulationChannelBandwidth OBJECT-TYPE Channel bandwidth occupied by the DVB-T signal in the frequency spectrum. You can configure 5, 6, 7, or 8 MHz. The choice depends on the required bandwidth of the channel to be transmitted. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.3.3.1.3 | DvbtChannelBandwidth | read-only | current |
| dvbtOutModulationFftMode OBJECT-TYPE The amount of used subcarriers. The FFT length corresponds to the number of carriers used. The setting depends on the customized decision concerning your DVB network.The OFDM signal is modeled at 2K on 1705 carriers and at 8K on 6817 carriers. The setting of 4K can be selected only for DVB-H. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.3.3.1.4 | DvbtFftSize | read-only | current |
| dvbtOutModulationGuardInterval OBJECT-TYPE The time where no information is sent in relation to the bit on air time. This value affects the error correction in multipath receiving situations. A long Guard Interval reduces the amount of payload data. The time span between signals for multicarrier modulation, in which no information is transmitted. The larger the time span is, the lower the risk of interference and the lower the data transfer rate. The setting values are a fraction of the symbol period. Ideally, you select a value that is larger than the longest echo travel time of the system. Possible setting values are: 1/32, 1/16, 1/8, 1/4, whereby the risk of interference is greatest at 1/32, but the data transfer rate, in turn, is highest. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.3.3.1.5 | DvbtGuardInterval | read-only | current |
| dvbtOutModulationConstellation OBJECT-TYPE Shows the modulation mode. QPSK is very fail-safe, but has only a small data rate. 64 QAM can transmit very large data rates if you expect few faults on the transmission link. 16 QAM is a compromise between the two other setting values. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.3.3.1.6 | DvbtModulation | read-only | current |
| dvbtOutModulationCodeRate OBJECT-TYPE With the code rate you can configure the relationship between user data and (error correction values+user data). Possible values are 1/2, 2/3, 3/4, 5/6, 7/8. The greatest error correction and the lowest data transfer rate are enabled by 1/2, and the lowest error correction and greatest data transfer rate are enabled by 7/8. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.3.3.1.7 | DvbtCodeRate | read-only | current |
| dvbtOutModulationMpeFEC OBJECT-TYPE Shows whether the forward error correction is on or off. This parameter is meaningful for DVB-H only. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.3.3.1.8 | TruthValue | read-only | current |
| dvbtOutModulationTimeSlicing OBJECT-TYPE Shows the activation of the transmission of the payload in time slices. It enables energy-efficient operation of the receivers, since these can disable their input stages during pauses in transmission. This parameter is meaningful for DVB-H only. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.3.3.1.9 | TruthValue | read-only | current |
| dvbtOutModulationInterleave OBJECT-TYPE Process according to which the bit interleaver interleaves its data. This parameter is meaningful for DVB-H only. | 1.3.6.1.4.1.2566.127.1.2.216.6.1.3.3.1.10 | DvbtInterleave | read-only | current |
| rsXx9DvbtConformance OBJECT-IDENTITY | 1.3.6.1.4.1.2566.127.1.2.216.6.2 | |||
| rsXx9DvbtCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.2566.127.1.2.216.6.2.1 | |||
| rsXx9DvbtGroups OBJECT-IDENTITY | 1.3.6.1.4.1.2566.127.1.2.216.6.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| dvbtEncoderSummary NOTIFICATION-TYPE Encoder summary state. Possible values: off(2) fault(3) warning(4) ok(5) Notification class: fault | 1.3.6.1.4.1.2566.127.1.2.216.6.0.1 | current |
| dvbtTest NOTIFICATION-TYPE One of the test signals is activated. If a test signal is activated, decoding of the transmitted signal by the transmitter will not be possible. Possible values: off(2) - no test signal generation warning(4) - test signal generation is activated Notification class: warning | 1.3.6.1.4.1.2566.127.1.2.216.6.0.2 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| dvbtBasicCompliance MODULE-COMPLIANCE The compliance statement for XX9000 DVB-T encoding. | 1.3.6.1.4.1.2566.127.1.2.216.6.2.1.1 | current |
| dvbtObjBasic OBJECT-GROUP General DVB-T objects. | 1.3.6.1.4.1.2566.127.1.2.216.6.2.2.1 | current |
| dvbtNotifyBasic NOTIFICATION-GROUP General DVB-T notifications. | 1.3.6.1.4.1.2566.127.1.2.216.6.2.2.101 | current |
| dvbtObjDvbH OBJECT-GROUP Additional objects for DVB-H. | 1.3.6.1.4.1.2566.127.1.2.216.6.2.2.102 | current |