RS-XX9-DTMB-MIB
- Registered at
- 1.3.6.1.4.1.2566.127.1.2.216.12.01.3.6.1.4.1.2566.127.1.2.216.12.11.3.6.1.4.1.2566.127.1.2.216.12.21.3.6.1.4.1.2566.149.1.216.12
- Last updated
- 2015-06-23 11:00
- Organization
- Rohde&Schwarz GmbH & Co. KG
- Revisions
- 2015-07-06 12:00, 2015-02-27 15:00, 2014-12-22 16:00, 2014-01-30 11:00, 2013-09-02 11:00, 2013-05-29 15:00
- Namespace
- rs
- Source file
RS-XX9-DTMB-MIB- Digest
sha256:6462a1493a5a37b9c4df32b5908218ac6c051b482eef8a98cd515f710332c458
Description
This MIB defines DTMB specific objects of XX9000 transmitting systems from Rohde & Schwarz. The following MIBs are related to this: - RS-COMMON-MIB - mandatory for this MIB - RS-XX9-SMI-MIB - mandatory for this MIB - RS-XX9-TC-MIB - mandatory for this MIB - RS-XX9-COMMON-MIB - mandatory for this MIB
Contact
Rohde & Schwarz GmbH & Co. KG Broadcasting Division Muehldorfstrasse 15 81671 Munich Germany customersupport@rohde-schwarz.com
Imports
| From | Symbols |
|---|---|
| RS-XX9-COMMON-MIB | commonNotificationAlarmClass |
| RS-XX9-SMI-MIB | rsXx9Dtmb, rsXx9MibModule |
| RS-XX9-TC-MIB | IndexAB, IndexTransmitter, NotificationMask, NotificationPriority, NotificationState, SwitchOnOff |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ENTITY-MIB IANA-ENTITY-MIB INET-ADDRESS-MIB RS-COMMON-MIB RS-XX9-COMMON-MIB RS-XX9-DTMB-MIB RS-XX9-SMI-MIB RS-XX9-TC-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC UUID-TC-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| DtmbChannelBandwidth TEXTUAL-CONVENTION mhz6(5) - 6 MHz mhz7(6) - 7 MHz mhz8(7) - 8 MHz | current | |||
| DtmbCodeRate TEXTUAL-CONVENTION Description. | current | |||
| DtmbGuardInterval TEXTUAL-CONVENTION Description. | current | |||
| DtmbModulation TEXTUAL-CONVENTION Description. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| rsXx9DtmbNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.2566.127.1.2.216.12.0 | |||
| rsXx9DtmbObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2566.127.1.2.216.12.1 | |||
| dtmbStatus OBJECT-IDENTITY | 1.3.6.1.4.1.2566.127.1.2.216.12.1.1 | |||
| dtmbStatusNotificationTable OBJECT-TYPE The context information/configuration for the DTMB status notifications. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.1.1 | not-accessible | current | |
| dtmbStatusNotificationEntry OBJECT-TYPE An entry in the dtmbStatusNotificationTable. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.1.1.1 | not-accessible | current | |
| dtmbStatusNotificationTxIdx OBJECT-TYPE The transmitter index. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.1.1.1.1 | IndexTransmitter | not-accessible | current |
| dtmbStatusNotificationExcIdx OBJECT-TYPE This index distinguishes the exciters. Necessary if you have dual drive transmitters. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.1.1.1.2 | IndexAB | not-accessible | current |
| dtmbStatusNotificationIdx OBJECT-TYPE The notification number as below rsXx9DtmbNotifications. This is a helper column and therefore not accessible. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.1.1.1.3 | Unsigned32 (1..3) | not-accessible | current |
| dtmbStatusNotificationName OBJECT-TYPE The notification number as an enumeration. The enumeration correlates with the notifications under rsXx9DtmbNotifications. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.1.1.1.4 | INTEGER {dtmbEncoderSummary(1), dtmbManualConfiguration(2), dtmbActiveConfiguration(3), dtmbTest(4)} | read-write | current |
| dtmbStatusNotificationMask OBJECT-TYPE See TextualConvention for details. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.1.1.1.5 | NotificationMask | read-write | current |
| dtmbStatusNotificationPriority OBJECT-TYPE See TextualConvention for details. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.1.1.1.6 | NotificationPriority | read-write | current |
| dtmbStatusNotificationState OBJECT-TYPE See TextualConvention for details. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.1.1.1.7 | NotificationState | read-only | current |
| dtmbStateTable OBJECT-TYPE DTMB state values. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.1.2 | not-accessible | current | |
| dtmbStateEntry OBJECT-TYPE An entry in the dtmbStateTable. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.1.2.1 | not-accessible | current | |
| dtmbStTxDelayOffset OBJECT-TYPE Transmitting time shift compared to other transmitters in the DTMB network. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.1.2.1.1 | Integer32 | read-only | current |
| dtmbSetup OBJECT-IDENTITY | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2 | |||
| dtmbConfigurationTable OBJECT-TYPE General DTMB configuration. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.1 | not-accessible | current | |
| dtmbConfigurationEntry OBJECT-TYPE An entry in the dtmbConfigurationTable. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.1.1 | not-accessible | current | |
| dtmbConfigurationTxIdx OBJECT-TYPE The transmitter index. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.1.1.1 | IndexTransmitter | not-accessible | current |
| dtmbConfigurationExcIdx OBJECT-TYPE This index distinguishes the exiters. Necessary if you have dual drive transmitters. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.1.1.2 | IndexAB | not-accessible | current |
| dtmbConfigurationTpsSource OBJECT-TYPE Source set for the TPS parameters (TPS = transmission parameter signaling). off(1) is an undefined setting and shall not be used. The following are possible sources: - MIP (megaframe initialization packet), - SIP (second frame initialization packet) - manually selected default settings. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.1.1.3 | INTEGER {off(1), mip(2), manual(3), sip(4)} | read-write | current |
| dtmbConfigurationInfoPacketReplacement OBJECT-TYPE Controls, whether the information packets (MIP or SIP) shall be contained in the outgiung datastream (off-2), or replaced by null-packets (on-3). | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.1.1.4 | INTEGER {undefined(1), off(2), on(3)} | read-write | current |
| dtmbConfigurationNetworkMode OBJECT-TYPE Used to activate time synchronization. MFN: The time of transmission is not controlled. SFN (MIP): The time of transmission of a symbol is the same for all the transmitters of a single-frequency network (SFN). The time of transmission signaled by the Megaframe Information Packet is used. SFN (SIP): The time of transmission of a symbol is the same for all the transmitters of a single-frequency network (SFN). The time of transmission signaled by the Session Initiation Protocol is used. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.1.1.5 | INTEGER {undefined(1), mfn(2), sfnMip(3), sfnSip(4)} | read-write | current |
| dtmbModulationTable OBJECT-TYPE DTMB modulation parameters. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.3 | not-accessible | current | |
| dtmbModulationEntry OBJECT-TYPE An entry in the dtmbModulationTable. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.3.1 | not-accessible | current | |
| dtmbModulationChannelBandwidth OBJECT-TYPE Channel bandwidth occupied by the DTMB signal in the frequency spectrum. 6 MHz, 7 MHz or 8 MHz can be set. The choice depends on the required bandwidth of the channel to be transmitted. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.3.1.3 | DtmbChannelBandwidth | read-write | current |
| dtmbModulationGuardInterval OBJECT-TYPE Padding mode for the guard interval. The value can be changed if Manual was selected as the TPS source. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.3.1.5 | DtmbGuardInterval | read-write | current |
| dtmbModulationConstellation OBJECT-TYPE Sets up the modulation mode. The value can be changed if Manual was selected as the TPS source. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.3.1.6 | DtmbModulation | read-write | current |
| dtmbModulationCodeRate OBJECT-TYPE Sets the code rate. The code rate is used to set the ratio of information data to (error correction values + information data). 4/10 provides the greatest error correction and the lowest data transfer rate 8/10 provides the lowest error correction and the greatest data transfer rate. The value can be changed if Manual was selected as the TPS source. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.3.1.7 | DtmbCodeRate | read-write | current |
| dtmbModulationTimeInterleaver OBJECT-TYPE Sets the mode for the time interleaver. The time interleaver distributes the payload data over many symbols in order to reduce noise sensitivity. The setting 720 symbols (s720-3) is recommended for a high error tolerance. If, on the other hand, the resulting delay is to be kept short, the setting 240 symbols (s240-2) is more suitable. The value can be changed if Manual was selected as the TPS source. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.3.1.8 | INTEGER {off(2), s240(3), s720(4)} | read-write | current |
| dtmbModulationControlFrame OBJECT-TYPE obsolete parameter. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.3.1.9 | SwitchOnOff | read-write | obsolete |
| dtmbModulationCarrierMode OBJECT-TYPE configures whether the signal should be transmitted in Single Carrier Mode (previously: ADTB-T) or in Multicarrier Mode (previously: DMB-T) with 3780 single carriers. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.3.1.10 | INTEGER {single(2), multi(3)} | read-write | current |
| dtmbModulationDualPilotTone OBJECT-TYPE configures whether two additional pilot signals are to be inserted into the spectrum. The pilots are at +/- half symbol rate. The setting can be changed here. This parameter is effective only if Carrier Mode= Single has been selected. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.3.1.11 | SwitchOnOff | read-write | current |
| dtmbModulationGuardIntervalPN OBJECT-TYPE Sets which PN sequence (pseudo random noise sequence) is used for the guard interval. Constant (3): The PN sequence Index 0 is always used Variable (2): All PN sequences will be used. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.3.1.12 | INTEGER {variable(2), constant(3)} | read-write | current |
| dtmbTestTable OBJECT-TYPE Configures the test mode of the exciter. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.4 | not-accessible | current | |
| dtmbTestEntry OBJECT-TYPE An entry in the dtmbTestTable. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.4.1 | not-accessible | current | |
| dtmbTestMode OBJECT-TYPE sets which test signal is to be generated. - Off (1): switches off test signal generation. - PRBS (2): Generates a pseudo-random binary sequence insted of the payload. - Single Carrier (3): Generates an unmodulated single carrier. This test signal can be used to measure the phase noise of the synthesizer. The phase noise must be measured via the RF Monitor Out connector (X61). The cable connected to RF Out (X60) must be removed. In order to protect the amplifiers, this test signal is only generated if the output of the exciter is open. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.4.1.1 | INTEGER {off(1), prbs(2), singleCarrier(3)} | read-write | current |
| dtmbTestCarrierPower OBJECT-TYPE sets level of the single carrier. This parameter is effective only if Carrier Mode = Single has been selected. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.4.1.2 | Unsigned32 (0..255) | read-write | current |
| dtmbLocalizationTable OBJECT-TYPE DTMB localization parameters. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.5 | not-accessible | current | |
| dtmbLocalizationEntry OBJECT-TYPE An entry in the dtmbLocalizationTable. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.5.1 | not-accessible | current | |
| dtmbLocalizationTxControl OBJECT-TYPE Description. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.5.1.1 | INTEGER {undefined(1), on(2), off(3)} | read-write | current |
| dtmbLocalizationTxAddress OBJECT-TYPE Description. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.2.5.1.2 | Unsigned32 (0..65535) | read-write | current |
| dtmbOutput OBJECT-IDENTITY | 1.3.6.1.4.1.2566.127.1.2.216.12.1.3 | |||
| dtmbOutModulationTable OBJECT-TYPE Currently active DTMB modulation parameters. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.3.1 | not-accessible | current | |
| dtmbOutModulationEntry OBJECT-TYPE An entry in the dtmbOutModulationTable. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.3.1.1 | not-accessible | current | |
| dtmbOutModulationChannelBandwidth OBJECT-TYPE Channel bandwidth occupied by the DTMB signal in the frequency spectrum. 6 MHz, 7 MHz or 8 MHz can be set. The choice depends on the required bandwidth of the channel to be transmitted. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.3.1.1.3 | DtmbChannelBandwidth | read-only | current |
| dtmbOutModulationGuardInterval OBJECT-TYPE Padding mode for the guard interval. The value can be changed if Manual was selected as the TPS source. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.3.1.1.5 | DtmbGuardInterval | read-only | current |
| dtmbOutModulationConstellation OBJECT-TYPE Shows the modulation mode. The value can be changed if Manual was selected as the TPS source. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.3.1.1.6 | DtmbModulation | read-only | current |
| dtmbOutModulationCodeRate OBJECT-TYPE Shows the code rate. The code rate is used to set the ratio of information data to (error correction values + information data). 4/10 provides the greatest error correction and the lowest data transfer rate 8/10 provides the lowest error correction and the greatest data transfer rate. The value can be changed if Manual was selected as the TPS source. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.3.1.1.7 | DtmbCodeRate | read-only | current |
| dtmbOutModulationTimeInterleaver OBJECT-TYPE Shows the mode for the time interleaver. The time interleaver distributes the payload data over many symbols in order to reduce noise sensitivity. The setting 720 symbols (s720-3) is recommended for a high error tolerance. If, on the other hand, the resulting delay is to be kept short, the setting 240 symbols (s240-2) is more suitable. The value can be changed if Manual was selected as the TPS source. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.3.1.1.8 | INTEGER {off(2), s240(3), s720(4)} | read-only | current |
| dtmbOutModulationCarrierMode OBJECT-TYPE Shows whether the signal should be transmitted in Single Carrier Mode (previously: ADTB-T) or in Multicarrier Mode (previously: DMB-T) with 3780 single carriers. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.3.1.1.10 | INTEGER {single(2), multi(3)} | read-only | current |
| dtmbOutModulationDualPilotTone OBJECT-TYPE Shows whether two additional pilot signals are to be inserted into the spectrum. The pilots are at +/- half symbol rate. This parameter is effective only if Carrier Mode= Single has been selected. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.3.1.1.11 | SwitchOnOff | read-only | current |
| dtmbOutModulationGuardIntervalPN OBJECT-TYPE Shows which PN sequence (pseudo random noise sequence) is used for the guard interval. Constant (3): The PN sequence Index 0 is always used Variable (2): All PN sequences will be used. | 1.3.6.1.4.1.2566.127.1.2.216.12.1.3.1.1.12 | INTEGER {variable(2), constant(3)} | read-only | current |
| rsXx9DtmbConformance OBJECT-IDENTITY | 1.3.6.1.4.1.2566.127.1.2.216.12.2 | |||
| rsXx9DtmbCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.2566.127.1.2.216.12.2.1 | |||
| rsXx9DtmbGroups OBJECT-IDENTITY | 1.3.6.1.4.1.2566.127.1.2.216.12.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| dtmbEncoderSummary NOTIFICATION-TYPE Encoder summary state. Possible values: off(2) fault(3) warning(4) ok(5) Notification class: fault | 1.3.6.1.4.1.2566.127.1.2.216.12.0.1 | current |
| dtmbManualConfiguration NOTIFICATION-TYPE Indicates whether the configured DTMB configuration is consistent and valid over all three layers. If an error is displayed, check whether the sum of all segments over the three layers is exactly 13. Possible values: off(2) - warning(4) - not valid ok(5) - valid Notification class: warning | 1.3.6.1.4.1.2566.127.1.2.216.12.0.2 | current |
| dtmbActiveConfiguration NOTIFICATION-TYPE Indicates whether the active DTMB configuration is consistent and valid over all three layers. If an error is displayed, check whether the sum of all segments over the three layers is exactly 13. Possible values: off(2) - warning(4) - not valid ok(5) - valid Notification class: warning | 1.3.6.1.4.1.2566.127.1.2.216.12.0.3 | current |
| dtmbTest NOTIFICATION-TYPE One of the test signals is activated. If a test signal is activated, decoding of the transmitted signal by the transmitter will not be possible. Possible values: off(2) - no test signal generation warning(4) - test signal generation is activated Notification class: warning | 1.3.6.1.4.1.2566.127.1.2.216.12.0.4 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| dtmbBasicCompliance MODULE-COMPLIANCE The compliance statement for XX9000 DTMB encoding. | 1.3.6.1.4.1.2566.127.1.2.216.12.2.1.1 | current |
| dtmbObjBasic OBJECT-GROUP Basic DTMB objects group. | 1.3.6.1.4.1.2566.127.1.2.216.12.2.2.1 | current |
| dtmbNotifyBasic NOTIFICATION-GROUP General DTMB notifications. | 1.3.6.1.4.1.2566.127.1.2.216.12.2.2.2 | current |
| dtmbObjBasicObsolete OBJECT-GROUP absoleted DTMB objects group. | 1.3.6.1.4.1.2566.127.1.2.216.12.2.2.3 | obsolete |