MIBs Depot

RS-XX9-DAB-MIB

Registered at
1.3.6.1.4.1.2566.127.1.2.216.10.0
1.3.6.1.4.1.2566.127.1.2.216.10.1
1.3.6.1.4.1.2566.127.1.2.216.10.2
1.3.6.1.4.1.2566.149.1.216.1
Last updated
2016-03-23 09:00
Organization
Rohde&Schwarz GmbH & Co. KG
Revisions
2016-03-23 09:00, 2015-11-30 15:00, 2015-02-27 15:00, 2015-02-02 18:00, 2014-12-22 16:00, 2014-09-30 13:00, 2014-06-03 12:00, 2014-05-16 15:00, 2014-03-06 16:00, 2013-12-20 10:00, 2013-10-10 14:00, 2013-10-01 10:00, 2013-03-13 10:00
Namespace
rs
Source file
RS-XX9-DAB-MIB
Digest
sha256:99349374a121099ab37390c4561f6ce5ca62f9c2037d1f818000f26d06e5c0e7

Description

This MIB defines DAB specific objects of XX9000 transmitting systems from Rohde & Schwarz. The following MIBs are related to this: - RS-COMMON-MIB - mandatory for this MIB - RS-XX9-SMI-MIB - mandatory for this MIB - RS-XX9-TC-MIB - mandatory for this MIB - RS-XX9-COMMON-MIB - mandatory for this MIB

Contact

Rohde & Schwarz GmbH & Co. KG Broadcasting Division Muehldorfstrasse 15 81671 Munich Germany customersupport@rohde-schwarz.com

Imports

FromSymbols
INET-ADDRESS-MIBInetAddress, InetAddressType
RS-XX9-COMMON-MIBcommonNotificationAlarmClass
RS-XX9-SMI-MIBrsXx9Dab, rsXx9MibModule
RS-XX9-TC-MIBIndexAB, IndexTransmitter, NotificationMask, NotificationPriority, NotificationState
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ENTITY-MIB
IANA-ENTITY-MIB
INET-ADDRESS-MIB
RS-COMMON-MIB
RS-XX9-COMMON-MIB
RS-XX9-DAB-MIB
RS-XX9-SMI-MIB
RS-XX9-TC-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
UUID-TC-MIB

Textual conventions

NameOIDSyntaxAccessStatus
DabMode
TEXTUAL-CONVENTION
DAB mode
current
DabModeSource
TEXTUAL-CONVENTION
Source for DAB mode: manual(1) - from dabModulationMode etiMID(2) - signalled by ETI(LI)-MID
current
DabTiiSource
TEXTUAL-CONVENTION
Behaviour of TII (transmitter identification information). off(1) - not signalled - main ID out of range manual(2) - signalled from manual input etiMNSC(3) - signalled from ASS type 0 message
current
DatarateState
TEXTUAL-CONVENTION
Description.
current
ErrorLevelState
TEXTUAL-CONVENTION
Description.
current
NetworkCompensationDelay
TEXTUAL-CONVENTION
Description.
current

Objects

NameOIDSyntaxAccessStatus
rsXx9DabNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.10.0
rsXx9DabObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.10.1
dabInput
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.10.1.1
dabInputCommonTable
OBJECT-TYPE
Common parameters for all inputs.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.1not-accessiblecurrent
dabInputCommonEntry
OBJECT-TYPE
An entry in the dabInputCommonTable.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.1.1not-accessiblecurrent
dabInputCmnTxIdx
OBJECT-TYPE
The transmitter index.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.1.1.1IndexTransmitternot-accessiblecurrent
dabInputCmnExcIdx
OBJECT-TYPE
This index distinguishes the exiters. Necessary if you have dual drive transmitters.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.1.1.2IndexABnot-accessiblecurrent
dabInputCmnImpedance
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.1.1.3INTEGER {ohm75(2), high(3)}read-writecurrent
dabInputCmnEdiDejitterBuffer
OBJECT-TYPE
Determines the buffer time at start, before the input data is forwarded to EDI handling. This value should be greater than the expected jitter of the input network.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.1.1.4Unsigned32 (10..100)read-writecurrent
dabInputCmnEdiMaxReplacements
OBJECT-TYPE
Determines the number of ETI frames, which can be created because of replacement. If this number is exceeded, the input is switched off.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.1.1.5Unsigned32 (0..255)read-writecurrent
dabInputEtiTable
OBJECT-TYPE
ETI input parameters.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.2not-accessiblecurrent
dabInputEtiEntry
OBJECT-TYPE
An entry in the dabInputEtiTable.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.2.1not-accessiblecurrent
dabInputEtiInputIdx
OBJECT-TYPE
Input index.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.2.1.1INTEGER {input1(1), input2(2)}not-accessiblecurrent
dabInputEtiSyncState
OBJECT-TYPE
Indicates whether the synchronisation could occur on the data stream and which kind of feeding the data stream is used. niG703(6) - ETI(NI, G.703) na5592(7) - ETI(NA, G.704)5592 na5376(8) - ETI(NA, G.704)5376
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.2.1.2INTEGER {undefined(1), noSignal(2), ais(3), g703(4), g704(5), niG703(6), na5592(7), na5376(8)}read-onlycurrent
dabInputEtiDatarate
OBJECT-TYPE
The total data rate inclusive stuffing bytes at ETI feed.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.2.1.3Unsigned32read-onlycurrent
dabInputEtiDatarateState
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.2.1.4DatarateStateread-onlycurrent
dabInputEtiErrorLevelState
OBJECT-TYPE
Indicates the status of error level included in the ETI. The status is set from a multiplexer individually for each ETI Frame. Off: The monitoring is deactivated. No Signal: No signal is being applied. Too High: The error level is 2. This input is used no longer. Ok: The error level is 2.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.2.1.5ErrorLevelStateread-onlycurrent
dabInputNotificationTable
OBJECT-TYPE
The context information/configuration for the DAB input notifications.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.3not-accessiblecurrent
dabInputNotificationEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.3.1not-accessiblecurrent
dabInputNotificationTxIdx
OBJECT-TYPE
The transmitter index.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.3.1.1IndexTransmitternot-accessiblecurrent
dabInputNotificationExcIdx
OBJECT-TYPE
This index distinguishes the exiters. Necessary if you have dual drive transmitters.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.3.1.2IndexABnot-accessiblecurrent
dabInputNotificationInputIdx
OBJECT-TYPE
Input index.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.3.1.3INTEGER {input1(1), input2(2)}not-accessiblecurrent
dabInputNotificationIdx
OBJECT-TYPE
The notification number as below rsXx9DabNotifications. This is a helper column and therefore not-accessible.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.3.1.4Unsigned32 (4..5)not-accessiblecurrent
dabInputNotificationName
OBJECT-TYPE
The notification number as an enumeration. The enumeration correlates with the notifications below rsXx9DabNotifications.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.3.1.5INTEGER {dabInpIfEtiState(4), dabInpIfEdiState(5)}read-onlycurrent
dabInputNotificationMask
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.3.1.6NotificationMaskread-writecurrent
dabInputNotificationPriority
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.3.1.7NotificationPriorityread-writecurrent
dabInputNotificationState
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.3.1.8NotificationStateread-onlycurrent
dabInputEdiTable
OBJECT-TYPE
EDI input parameters.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.4not-accessiblecurrent
dabInputEdiEntry
OBJECT-TYPE
An entry in the dabInputEdiTable.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.4.1not-accessiblecurrent
dabInputEdiSyncState
OBJECT-TYPE
Indicates whether the datastream could be synchronized and which type of the datastream is fed.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.4.1.1INTEGER {undefined(0), noSignal(1), stiDLi(8), etiNi(9)}read-onlycurrent
dabInputEdiDatarate
OBJECT-TYPE
Indicates the total data rate (gross data rate) on the EDI feed.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.4.1.2Unsigned32read-onlycurrent
dabInputEdiDatarateState
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.4.1.3DatarateStateread-onlycurrent
dabInputEdiConnector
OBJECT-TYPE
Used to define the physical network interface to which the logical EDI stream is bound. Normally, the TS LAN 1 socket (X30) is coupled to EDI stream 1 and the TS LAN 2 socket (X31) to EDI stream 2. This allows you to use multiple redundant servers that can be selected automatically using the automatic input signal switchover. However, it is also possible to feed several multicast streams via the same physical Ethernet socket. In this case, too, the automatic input signal switchover function can toggle automatically between two data streams.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.4.1.4INTEGER {tsLan1(1), tsLan2(2)}read-writecurrent
dabInputEdiStreamingMode
OBJECT-TYPE
Determines the streaming mode.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.4.1.5INTEGER {uniCast(1), multiCast(2)}read-writecurrent
dabInputEdiStreamAddressType
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.4.1.6InetAddressTyperead-onlycurrent
dabInputEdiStreamAddress
OBJECT-TYPE
If dabInputEdiStreamingMode is unicast(1) this object is read-only and shows the IP address on the physical connector. If dabInputEdiStreamingMode is multicast(2) this object is read-write for configuration of the multicast source the IP address.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.4.1.7InetAddressread-writecurrent
dabInputEdiStreamPort
OBJECT-TYPE
The port of the logical input stream.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.4.1.8Unsigned32 (1..65535)read-writecurrent
dabInputEdiErrorLevelState
OBJECT-TYPE
Indicates the status of error level included in the EDI. The status is set from a multiplexer individually for each EDI Frame. Off: The monitoring is deactivated. No Signal: No signal is being applied. Too High: The error level is 2. This input is used no longer. Ok: The error level is 2.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.4.1.9ErrorLevelStateread-onlycurrent
dabInputEdiReplacementStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.4.1.10INTEGER {undefined(1), noInput(2), unused(3), replacedFrames(4), ok(5)}read-writecurrent
dabInputEdiFecMode
OBJECT-TYPE
Shows the fed FEC.
1.3.6.1.4.1.2566.127.1.2.216.10.1.1.4.1.11INTEGER {undefined(1), off(2), mode1(3), mode2(4), mode3(5), mode4(6), mode5(7), mode6OrHigher(8), unknown(9)}read-onlycurrent
dabStatus
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.10.1.2
dabStatusNotificationTable
OBJECT-TYPE
The context information/configuration for the DAB status notifications.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.1not-accessiblecurrent
dabStatusNotificationEntry
OBJECT-TYPE
An entry in the dabStatusNotificationTable.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.1.1not-accessiblecurrent
dabStatusNotificationTxIdx
OBJECT-TYPE
The transmitter index.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.1.1.1IndexTransmitternot-accessiblecurrent
dabStatusNotificationExcIdx
OBJECT-TYPE
This index distinguishes the exiters. Necessary if you have dual drive transmitters.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.1.1.2IndexABnot-accessiblecurrent
dabStatusNotificationIdx
OBJECT-TYPE
The notification number as below rsXx9DabNotifications. This is a helper column and therefore not-accessible.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.1.1.3Unsigned32 (1..3)not-accessiblecurrent
dabStatusNotificationName
OBJECT-TYPE
The notification number as an enumeration. The enumeration correlates with the notifications below rsXx9DabNotifications.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.1.1.4INTEGER {dabTiiMainIdOutOfRange(1), dabEncoderSummary(2), dabTest(3)}read-onlycurrent
dabStatusNotificationMask
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.1.1.5NotificationMaskread-writecurrent
dabStatusNotificationPriority
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.1.1.6NotificationPriorityread-writecurrent
dabStatusNotificationState
OBJECT-TYPE
See textual convention for details.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.1.1.7NotificationStateread-onlycurrent
dabActiveConfigurationTable
OBJECT-TYPE
Current general DAB configuration.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.2not-accessiblecurrent
dabActiveConfigurationEntry
OBJECT-TYPE
An entry in the dabActiveConfigurationTable.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.2.1not-accessiblecurrent
dabActCfgModeSource
OBJECT-TYPE
Indicates the source from which the DAB mode setting is retrieved. Manual: DAB mode is set manually at the transmitter. ETI (LI)-MID: DAB mode is read out from the ETI header.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.2.1.1DabModeSourceread-onlycurrent
dabActiveLocalizationTable
OBJECT-TYPE
Current DAB localization parameters.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.3not-accessiblecurrent
dabActiveLocalizationEntry
OBJECT-TYPE
An entry in the dabActiveLocalizationTable.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.3.1not-accessiblecurrent
dabActLclTxAddressPresentPlain
OBJECT-TYPE
Indicates whether transmitter identification information (TII) for the set transmitter address is contained in the transport stream.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.3.1.1TruthValueread-onlycurrent
dabActLclTxAddressRequired
OBJECT-TYPE
Depending on the setting for TII Source, indicates whether the Tx address is evaluated.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.3.1.2TruthValueread-onlycurrent
dabActLclTxAddressState
OBJECT-TYPE
Indicates whether the Tx address is present. Never Seen: No Tx address has been found in the data stream. The main ID is set to 0 and the sub-ID is set to 1 and no additional Tx time offset is set. Holdover: The data stream does not currently contain a Tx address. The TII last found is sent. Ok: TII for the set Tx address is present in the data stream.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.3.1.3INTEGER {undefined(1), neverSeen(2), holdover(3), ok(4)}read-onlycurrent
dabActLclTiiSource
OBJECT-TYPE
Indicates which source has been selected for the identifiers of the TII (transmission identification information) settings.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.3.1.4DabTiiSourceread-onlycurrent
dabActiveModulationTable
OBJECT-TYPE
Current DAB modulation parameters.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.4not-accessiblecurrent
dabActiveModulationEntry
OBJECT-TYPE
An entry in the dabActiveModulationTable.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.4.1not-accessiblecurrent
dabActMdlModeEti
OBJECT-TYPE
Indicates which DAB mode is signaled via the ETI header in the data stream.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.4.1.1DabModeread-onlycurrent
dabActMdlMode
OBJECT-TYPE
Indicates the currently active DAB mode.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.4.1.2DabModeread-onlycurrent
dabActiveTiiTable
OBJECT-TYPE
Current DAB TII (transmitter identification information) parameters.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.5not-accessiblecurrent
dabActiveTiiEntry
OBJECT-TYPE
An entry in the dabActiveTiiTable.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.5.1not-accessiblecurrent
dabActTiiMainIdMnsc
OBJECT-TYPE
Indicates the main ID signaled via MNSC (multiplex network service channel).
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.5.1.1Unsigned32read-onlycurrent
dabActTiiSubIdMnsc
OBJECT-TYPE
Indicates the sub-ID signaled via MNSC (multiplex network service channel).
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.5.1.2Unsigned32read-onlycurrent
dabActTiiMainId
OBJECT-TYPE
Indicates the main ID effective in the exciter.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.5.1.3Unsigned32read-onlycurrent
dabActTiiSubId
OBJECT-TYPE
Indicates the sub-ID effective in the exciter.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.5.1.4Unsigned32read-onlycurrent
dabStatusSfnTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.6not-accessiblecurrent
dabStatusSfnEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.6.1not-accessiblecurrent
dabStSfnTxOffsetDelaySource
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.6.1.1INTEGER {off(1), mnsc(2)}read-onlycurrent
dabStSfnTxOffsetDelayMnsc
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.6.1.2Unsigned32read-onlycurrent
dabStSfnNetworkCompensationDelay
OBJECT-TYPE
Indicates the network compensation delay for the opereation in static single frequency networks. If dabSetupSfnSync has been set to static(4), the different feeding time of several transmitters in a SFN can be compensated by the setting of a static transit time correction. The value for the two logical inputs can be set separately.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.6.1.3NetworkCompensationDelayread-onlycurrent
dabStSfnTxCompensationDelay
OBJECT-TYPE
Indicates the time span by which the signal processing is delayed artificially to get a constant Tx Delay.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.6.1.4Unsigned32read-onlycurrent
dabStSfnTxOffsetDelay
OBJECT-TYPE
Indicates the TX Offset Delay. The TX Offset Delay is transmitted via the ETI signalling Channel MNSC (Multiplex Network Service Channel) and is used to set off the time of transmission in comparison with the regular time of transmission pre-determined by the Tx Delay.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.6.1.5Unsigned32read-onlycurrent
dabStSfnMfnOverallSignalDelay
OBJECT-TYPE
Indicates the processing delay of the signal through the transmitter.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.6.1.6Unsigned32 (0..2000000)read-onlycurrent
dabStatusSfnInputTable
OBJECT-TYPE
current DAB SFN state (by input).
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.7not-accessiblecurrent
dabStatusSfnInputEntry
OBJECT-TYPE
An entry in the dabStatusSfnInputTable
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.7.1not-accessiblecurrent
dabStSfnInputIdx
OBJECT-TYPE
Input index.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.7.1.1INTEGER {input1(1), input2(2)}not-accessiblecurrent
dabStSfnTistState
OBJECT-TYPE
shows, if the input fulfills the requirements of the TIST.
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.7.1.2INTEGER {undefined(1), off(2), missingNi(3), missingNa(4), null(5), ok(6), flywheelActive(7)}read-onlycurrent
dabStSfnNetworkCompensationDelayState
OBJECT-TYPE
Description. valid, if dabSetupSfnSync is dynamic(3)
1.3.6.1.4.1.2566.127.1.2.216.10.1.2.7.1.3NetworkCompensationDelayread-onlycurrent
dabSetup
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.10.1.3
dabConfigurationTable
OBJECT-TYPE
General DAB configuration.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.1not-accessiblecurrent
dabConfigurationEntry
OBJECT-TYPE
An entry in the dabConfigurationTable.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.1.1not-accessiblecurrent
dabConfigurationTxIdx
OBJECT-TYPE
The transmitter index.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.1.1.1IndexTransmitternot-accessiblecurrent
dabConfigurationExcIdx
OBJECT-TYPE
This index distinguishes the exiters. Necessary if you have dual drive transmitters.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.1.1.2IndexABnot-accessiblecurrent
dabConfigurationModeSource
OBJECT-TYPE
Indicates the DAB mode source. The setting can be changed here. Manual: DAB mode is set manually at the transmitter. ETI (LI)-MID: DAB mode is read out from the ETI header.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.1.1.3DabModeSourceread-writecurrent
dabLocalizationTable
OBJECT-TYPE
DAB localization parameters.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.2not-accessiblecurrent
dabLocalizationEntry
OBJECT-TYPE
An entry in the dabLocalizationTable.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.2.1not-accessiblecurrent
dabLocalizationTxAddress
OBJECT-TYPE
TX address of transmitter.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.2.1.1Unsigned32 (0..65535)read-writecurrent
dabLocalizationTiiSource
OBJECT-TYPE
see textual convention.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.2.1.2DabTiiSourceread-writecurrent
dabModulationTable
OBJECT-TYPE
DAB modulation parameters.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.3not-accessiblecurrent
dabModulationEntry
OBJECT-TYPE
An entry in the dabModulationTable.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.3.1not-accessiblecurrent
dabModulationChannelBandwidth
OBJECT-TYPE
Channel bandwidth of DAB signal. mhz1p5(2) - 1.5 MHz
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.3.1.1INTEGER {mhz1p5(2)}read-writecurrent
dabModulationMode
OBJECT-TYPE
Indicates which DAB mode has been manually preselected if dabConfigurationModeSource is manual(2).
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.3.1.2DabModeread-writecurrent
dabTiiTable
OBJECT-TYPE
DAB TII (transmitter identification information) parameters.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.4not-accessiblecurrent
dabTiiEntry
OBJECT-TYPE
An entry in the dabTiiTable.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.4.1not-accessiblecurrent
dabTiiMainId
OBJECT-TYPE
Defines main ID if dabLocalizationTiiSource is manual(2).
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.4.1.1Unsigned32 (0..69)read-writecurrent
dabTiiSubId
OBJECT-TYPE
Indicates the set sub-ID. The sub-ID can be used to distinguish between the transmitters within a DAB cell. The setting can be changed here if dabLocalizationTiiSource has been set to manual(2).
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.4.1.2Unsigned32 (1..23)read-writecurrent
dabTiiCarrierPhase
OBJECT-TYPE
Determines the TII Carrier Phase (CP). ETSI EN 300 401: The phase of TII carrier pairs are identical according to ETSI EN 300 401. PR-Symbol: The phase of TII carrier pairs are not identical according to ETSI EN 300 401.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.4.1.3INTEGER {etsi(1), prSymbol(2)}read-writecurrent
dabSetupSfnTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.5not-accessiblecurrent
dabSetupSfnEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.5.1not-accessiblecurrent
dabSetupSfnSync
OBJECT-TYPE
Indicates whether the network mode MFN or SFN (dynymic or static) is selected. The setting can be changed here. Off (MFN): The time of transmission is not controlled. Dynamic (SFN): The time of transmission of a symbol is the same for all the transmitters of a single-frequency network (SFN). The calculation of the network compensation delays occurs automatically. A GPS receiver is required for synchronization. Static (SFN): The time of transmission of a symbol is the same for all the transmitters of a single-frequency network (SFN). The network compensation delay must be determined manually and permanently set. A constant transit time must be ensured for a accurate function.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.5.1.1INTEGER {off(2), dynamic(3), static(4)}read-writecurrent
dabSetupSfnTistSource
OBJECT-TYPE
Indicates which source is selected for the TIST (timestamp). The setting can be changed here, if dabSetupSfnSync has been set to dynamic(3). It can be used the TIST either from the ETI (LI) frame or the ETI (NA) frame.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.5.1.2INTEGER {etiLi(3), etiNa(4)}read-writecurrent
dabSetupSfnMaxTistLevel
OBJECT-TYPE
Indicates the accuracy of the analysis of the timestamp. On principle the highest possible level must be used which is supported by the ensemble multiplexer and all other transmiiters in the network. Level 4 correponds to 488 ns. The setting of the level can be changed here, if dabSetupSfnSync has been set to dynamic(3).
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.5.1.3INTEGER {off(2), level1(3), level2(4), level3(5), level4(6), level5(7)}read-writecurrent
dabSetupSfnNetworkCompensationDelay1
OBJECT-TYPE
Network compensation delay for logical input 1. Indicates the network compensation delay for the opereation in static single frequency networks. If dabSetupSfnSync has been set to static(4), the different feeding time of several transmitters in a SFN can be compensated by the setting of a static transit time correction. The value for the two logical inputs can be set separately.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.5.1.4NetworkCompensationDelayread-writecurrent
dabSetupSfnNetworkCompensationDelay2
OBJECT-TYPE
Network compensation delay for logical input 2. Indicates the network compensation delay for the opereation in static single frequency networks. If dabSetupSfnSync has been set to static(4), the different feeding time of several transmitters in a SFN can be compensated by the setting of a static transit time correction. The value for the two logical inputs can be set separately.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.5.1.5NetworkCompensationDelayread-writecurrent
dabSetupSfnTxDelay
OBJECT-TYPE
Indicates the transit time of the signal through the transmitter. The transit time is the sum of Tx Compensation Delay and Tx Processing Delay.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.5.1.6Unsigned32 (0..1000000)read-writecurrent
dabSetupSfnTxOffsetDelaySource
OBJECT-TYPE
Choose whether a transmitter specific offset delay is taken from the Multiplex Network Service Channel.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.5.1.7INTEGER {off(1), mnsc(2)}read-writecurrent
dabTestTable
OBJECT-TYPE
Configures the test mode of the exciter.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.6not-accessiblecurrent
dabTestEntry
OBJECT-TYPE
An entry in the dabTestTable.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.6.1not-accessiblecurrent
dabTestSignal
OBJECT-TYPE
Indicates which test signal is to be generated. off(1): - switches off test signal generation. rohdeSchwarzEnsemble(2): - Generates an ETI(LI) signal insted of the payload. singleCarrier(3): - Generates an unmodulated single carrier. This test signal can be used to measure the phase noise of the synthesizer. The phase noise must be measured via the RF Monitor Out connector (X61). The cable connected to RF Out (X60) must be removed. In order to protect the amplifiers, this test signal is only generated if the output of the exciter is open.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.6.1.1INTEGER {off(1), rohdeSchwarzEnsemble(2), singleCarrier(3)}read-writecurrent
dabTestRsEnsembleDataChannel
OBJECT-TYPE
Indicates which PRBS Sequence shall be inserted to the data channel: To activate PRBS insertion the parameter dabTestSignal has to be set to rohdeSchwarzEnsemble(2). off(1): A PRBS sequence is inserted to the audio channel only. prbs(2): A PRBS sequence is inserted to the audio and data channel. The setting can be changed here.
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.6.1.2INTEGER {off(1), prbs(2)}read-writecurrent
dabTestRsEnsemblePrbs
OBJECT-TYPE
Indicates which pseudo random binary sequence shall be inserted to the audio and/or data channels. To activate PRBS insertion the parameter dabTestSignal has to be set to rohdeSchwarzEnsemble(2). The setting can be changed here. poly1(1) - x^20+x^17+1 poly2(2) - x^23+x^18+1 poly3(3) - x^15+x^14+1
1.3.6.1.4.1.2566.127.1.2.216.10.1.3.6.1.3INTEGER {poly1(1), poly2(2), poly3(3)}read-writecurrent
rsXx9DabConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.10.2
rsXx9DabCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.10.2.1
rsXx9DabGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2566.127.1.2.216.10.2.2

Notifications

NameOIDStatus
dabTiiMainIdOutOfRange
NOTIFICATION-TYPE
Indicates that the set TII Main Id is not allowed to use. This warning might occur when the DAB-mode is switched to Mode3. Please check the setting for DAB main-ID. Possible values: off(2) warning(4) - Active main ID not admissible in active DAB mode. Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.10.0.1current
dabEncoderSummary
NOTIFICATION-TYPE
Encoder summary state. Possible values: off(2) fault(3) warning(4) ok(5) Notification class: fault
1.3.6.1.4.1.2566.127.1.2.216.10.0.2current
dabTest
NOTIFICATION-TYPE
One of the test signals is activated. If a test signal is activated, decoding of the transmitted signal by the transmitter will not be possible. Possible values: off(2) - no test signal generation warning(4) - test signal generation is activated Notification class: warning
1.3.6.1.4.1.2566.127.1.2.216.10.0.3current
dabInpIfEtiState
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.10.0.4current
dabInpIfEdiState
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.2566.127.1.2.216.10.0.5current

Conformance

NameOIDStatus
dabBasicCompliance
MODULE-COMPLIANCE
The compliance statement for XX9000 DAB encoding.
1.3.6.1.4.1.2566.127.1.2.216.10.2.1.1current
dabObjBasic
OBJECT-GROUP
General DAB objects.
1.3.6.1.4.1.2566.127.1.2.216.10.2.2.1current
dabObjInput
OBJECT-GROUP
DAB input objects.
1.3.6.1.4.1.2566.127.1.2.216.10.2.2.2current
dabNotifyBasic
NOTIFICATION-GROUP
General DAB notifications.
1.3.6.1.4.1.2566.127.1.2.216.10.2.2.3current