MIBs Depot

RPHY-NDF-NDR-MIB

Registered at
1.3.6.1.4.1.9.9.857
Last updated
2018-09-25 00:00
Organization
Cisco Systems, Inc.
Revisions
2018-09-18 00:00
Namespace
cisco
Source file
RPHY-NDF-NDR-MIB
Digest
sha256:1340d92cafd316731c5ce690b2a5c2a2227977bf7184cd73528b808a0d6759e5

Description

description

Contact

Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-<list>@cisco.com

Imports

FromSymbols
CISCO-SMIciscoMgmt
INET-ADDRESS-MIBInetAddress
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CISCO-SMI
INET-ADDRESS-MIB
RPHY-NDF-NDR-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
rphyNdfNdrMIBNotifs
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.857.0
rphyNdfNdrMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.857.1
docsRphyRpdDevNdfCfgTable
OBJECT-TYPE
This table provides OOB NDF channel's status and configuration information, for example channel frequency, width, poweradjust, admin status etc. This table also allows to enable or disable the NDF channel's admin status.
1.3.6.1.4.1.9.9.857.1.1not-accessiblecurrent
docsRphyRpdDevNdfCfgEntry
OBJECT-TYPE
Each entry contains status and configuration information for a single NDF Channel.
1.3.6.1.4.1.9.9.857.1.1.1not-accessiblecurrent
docsRphyRpdDevNdfUniqueId
OBJECT-TYPE
This key attribute specifies a globally unique 6-byte identifier for the RPD. By convention, an RPD SHOULD use the MAC address of the lowest numbered Ethernet port facing the CIN.
1.3.6.1.4.1.9.9.857.1.1.1.1MacAddressnot-accessiblecurrent
docsRphyRpdDevNdfRfPort
OBJECT-TYPE
This key attribute reports the RPD RF port number carrying this NDF channel.
1.3.6.1.4.1.9.9.857.1.1.1.2Unsigned32not-accessiblecurrent
docsRphyRpdDevNdfRfChannel
OBJECT-TYPE
This key attribute reports the NDF channel number.
1.3.6.1.4.1.9.9.857.1.1.1.3Unsigned32not-accessiblecurrent
docsRphyRpdDevNdfEnable
OBJECT-TYPE
This attribute indicates whether the NDF stream is enabled or disabled. Also, using this attribute NDF stream can be enabled or disabled.
1.3.6.1.4.1.9.9.857.1.1.1.4TruthValueread-writecurrent
docsRphyRpdDevNdfDstIPAddr
OBJECT-TYPE
This attribute reports the Group IP address of the RPD multicast NDF stream. When this filed is 0.0.0.0 or 0::0 (::) then the NDF stream is a unicast NDF stream.
1.3.6.1.4.1.9.9.857.1.1.1.5InetAddressread-onlycurrent
docsRphyRpdDevNdfSrcIPAddr
OBJECT-TYPE
This attribute reports the IP address of the transmitter of the L2TP stream.
1.3.6.1.4.1.9.9.857.1.1.1.6InetAddressread-onlycurrent
docsRphyRpdDevNdfSessionId
OBJECT-TYPE
This attribute reports the L2TP session ID of the NDF stream.
1.3.6.1.4.1.9.9.857.1.1.1.7Unsigned32read-onlycurrent
docsRphyRpdDevNdfFrequency
OBJECT-TYPE
This attribute reports the center frequency of the NDF channel.
1.3.6.1.4.1.9.9.857.1.1.1.8Unsigned32read-onlycurrent
docsRphyRpdDevNdfBandwidth
OBJECT-TYPE
This attribute reports the bandwidth of the NDF channel. Channel widths supported for NDF are- Mode 0 : 80000Hz, Mode 1 : 160000Hz, Mode 2 : 320000Hz, Mode 3 : 640000Hz, Mode 4 : 1280000Hz, Mode 5 : 2560000Hz, Mode 6 : 5120000Hz, Mode 7 : 25600000Hz.
1.3.6.1.4.1.9.9.857.1.1.1.9Unsigned32read-onlycurrent
docsRphyRpdDevNdfPowerAdjust
OBJECT-TYPE
This attribute specifies power level adjustment for the NDF channel relative to the base power level configured for the DS RF port.
1.3.6.1.4.1.9.9.857.1.1.1.10Integer32read-onlycurrent
docsRphyRpdDevNdfRfMute
OBJECT-TYPE
This attribute reports the current state of the RF output of the NDF channel. When Rf-mute is set to TRUE, the output RF signal is off. Similarly, when Rf-mute is set to FALSE, the output RF signal is active.
1.3.6.1.4.1.9.9.857.1.1.1.11TruthValueread-onlycurrent
docsRphyRpdDevNdfIsUnicast
OBJECT-TYPE
This attribute indicates whether the NDF stream is unicast or multicast. When Group-IP filed is 0.0.0.0 or 0::0 (::) then the NDF stream is a unicast NDF stream.
1.3.6.1.4.1.9.9.857.1.1.1.12TruthValueread-onlycurrent
docsRphyRpdDevNdfRpdStatus
OBJECT-TYPE
This attribute reports the string describing the current status of the RPD i.e 'Online' or 'Offline'. For config modify to take effect, the RPD status shoud be 'Online'.
1.3.6.1.4.1.9.9.857.1.1.1.13OCTET STRINGread-onlycurrent
docsRphyRpdDevNdfRpdInPktCount
OBJECT-TYPE
This attribute reports the number of packets received by the RPD on a given NDF stream. RPD status should be 'Online' to get the actual input packets count.
1.3.6.1.4.1.9.9.857.1.1.1.14Counter64read-onlycurrent
docsRphyRpdDevNdfRpdOutPktCount
OBJECT-TYPE
This attribute reports the number of packets transmitted by the RPD. RPD status should be 'Online' to get the actual output packets count.
1.3.6.1.4.1.9.9.857.1.1.1.15Counter64read-onlycurrent
docsRphyRpdDevNdrCfgTable
OBJECT-TYPE
This table provides OOB NDR channel's status and configuration information, for example channel frequency, width, poweradjust, admin status etc. This table also allows to enable or disable the NDR channel's admin status.
1.3.6.1.4.1.9.9.857.1.2not-accessiblecurrent
docsRphyRpdDevNdrCfgEntry
OBJECT-TYPE
Each entry contains status and configuration information for a single NDR Channel.
1.3.6.1.4.1.9.9.857.1.2.1not-accessiblecurrent
docsRphyRpdDevNdrUniqueId
OBJECT-TYPE
This key attribute specifies a globally unique 6-byte identifier for the RPD. By convention, an RPD SHOULD use the MAC address of the lowest numbered Ethernet port facing the CIN.
1.3.6.1.4.1.9.9.857.1.2.1.1MacAddressnot-accessiblecurrent
docsRphyRpdDevNdrRfPort
OBJECT-TYPE
This key attribute reports the RPD RF port number
1.3.6.1.4.1.9.9.857.1.2.1.2Unsigned32not-accessiblecurrent
docsRphyRpdDevNdrRfChannel
OBJECT-TYPE
This key attribute reports the NDR channel number.
1.3.6.1.4.1.9.9.857.1.2.1.3Unsigned32not-accessiblecurrent
docsRphyRpdDevNdrEnable
OBJECT-TYPE
This attribute indicates whether the NDR stream is enabled or disabled. Also, using this attribute NDR stream can be enabled or disabled.
1.3.6.1.4.1.9.9.857.1.2.1.4TruthValueread-writecurrent
docsRphyRpdDevNdrDstIPAddr
OBJECT-TYPE
This attribute reports the IP address of the receiver of the NDR L2TP stream.
1.3.6.1.4.1.9.9.857.1.2.1.5InetAddressread-onlycurrent
docsRphyRpdDevNdrSrcIPAddr
OBJECT-TYPE
This attribute reports the IP address of the RPD transmitting the L2TP stream.
1.3.6.1.4.1.9.9.857.1.2.1.6InetAddressread-onlycurrent
docsRphyRpdDevNdrSessionId
OBJECT-TYPE
This attribute reports the L2TP session ID of the NDR stream.
1.3.6.1.4.1.9.9.857.1.2.1.7Unsigned32read-onlycurrent
docsRphyRpdDevNdrFrequency
OBJECT-TYPE
This attribute reports the center frequency of the NDR channel.
1.3.6.1.4.1.9.9.857.1.2.1.8Unsigned32read-onlycurrent
docsRphyRpdDevNdrBandwidth
OBJECT-TYPE
This attribute reports the bandwidth of the NDR channel.Channel widths supported for NDR are- Mode 0 : 80000Hz, Mode 1 : 160000Hz, Mode 2 : 320000Hz, Mode 3 : 640000Hz, Mode 4 : 1280000Hz, Mode 5 : 2560000Hz, Mode 6 : 5120000Hz.
1.3.6.1.4.1.9.9.857.1.2.1.9Unsigned32read-onlycurrent
docsRphyRpdDevNdrMtuSize
OBJECT-TYPE
This attribute reports the Maximum Transmission Unit or maximum packet size for the L2TP stream.
1.3.6.1.4.1.9.9.857.1.2.1.10Unsigned32read-onlycurrent
docsRphyRpdDevNdrPhb
OBJECT-TYPE
This attribute reports the DSCP QOS value configured for a L2TP packets. Default PHB is 0x0 means Best-Effort packet delivery.
1.3.6.1.4.1.9.9.857.1.2.1.11Unsigned32read-onlycurrent
docsRphyRpdDevNdrPowerAdjust
OBJECT-TYPE
This attribute represents the desired target receive power level adjust for the selected NDR channel from the base target power reference level specified for the corresponding US RF port. The value represents power spectral density and is specified in units of TenthdB per 1.6 MHz of equivalent RF spectrum. The channel’s target receive power is computed by adding the value of this attribute to the value of base target power reference level for the corresponding RF port. This object specifies the commanded input power level for the NDR channel as specified in [R-OOB].
1.3.6.1.4.1.9.9.857.1.2.1.12Integer32read-onlycurrent
docsRphyRpdDevNdrRpdStatus
OBJECT-TYPE
This attribute reports the string describing the current status of the RPD i.e 'Online' or 'Offline'. For config modify to take effect, the RPD status shoud be 'Online'.
1.3.6.1.4.1.9.9.857.1.2.1.13OCTET STRINGread-onlycurrent
docsRphyRpdDevNdrRpdInPktCount
OBJECT-TYPE
This attribute reports the number of packets received by the RPD on a given NDR stream. RPD status should be 'Online' to get the actual input packets count.
1.3.6.1.4.1.9.9.857.1.2.1.14Counter64read-onlycurrent
docsRphyRpdDevNdrRpdOutPktCount
OBJECT-TYPE
This attribute reports the number of packets transmitted by the RPD. RPD status should be 'Online' to get the actual output packets count.
1.3.6.1.4.1.9.9.857.1.2.1.15Counter64read-onlycurrent
rphyNdfNdrMIBConform
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.857.2
rphyNdfNdrMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.857.2.1
rphyNdfNdrMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.857.2.2

Notifications

NameOIDStatus
rphyNdfNdrMIBEventName
NOTIFICATION-TYPE
Test Notifiation Type
1.3.6.1.4.1.9.9.857.0.1current

Conformance

NameOIDStatus
rphyNdfNdrMIBCompliance
MODULE-COMPLIANCE
This is a default module-compliance containing default object groups.
1.3.6.1.4.1.9.9.857.2.1.1current
rphyNdfNdrMIBMainObjectGroup
OBJECT-GROUP
The is a test group.
1.3.6.1.4.1.9.9.857.2.2.1current
rphyNdfNdrMIBNotificationGroup
NOTIFICATION-GROUP
The is a test group.
1.3.6.1.4.1.9.9.857.2.2.2current