RFC7777-MIB
- Registered at
- 1.3.6.1.4.1.18
- Namespace
- nortel
- Source file
RFC7777-MIB- Digest
sha256:a7ff5797e8363ece954a0b7166a252958f62af49f4b857435245620cc9568561
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Opaque, TimeTicks, enterprises, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
RFC7777-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.18.3 | wfSwSeries7 | Wellfleet-COMMON-MIB |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| wellfleet OBJECT-IDENTITY | 1.3.6.1.4.1.18 | |||
| wfOspfGeneralGroup OBJECT-IDENTITY | 1.3.6.1.4.1.18.3.5.3.2.3.1 | |||
| wfOspfGeneralDelete OBJECT-TYPE 'This value determines whether OSPF is configured' | 1.3.6.1.4.1.18.3.5.3.2.3.1.1 | INTEGER {created(1), deleted(2)} | read-write | mandatory |
| wfOspfGeneralDisable OBJECT-TYPE 'The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it on all interfaces.' | 1.3.6.1.4.1.18.3.5.3.2.3.1.2 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| wfOspfGeneralState OBJECT-TYPE 'The state of OSPF' | 1.3.6.1.4.1.18.3.5.3.2.3.1.3 | INTEGER {up(1), down(2), init(3), notpresent(4)} | read-only | mandatory |
| wfOspfRouterId OBJECT-TYPE 'A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses.' REFERENCE 'OSPF Version 2, C.1 Global parameters' | 1.3.6.1.4.1.18.3.5.3.2.3.1.4 | IpAddress | read-write | mandatory |
| wfOspfVersionNumber OBJECT-TYPE 'The current version number of the OSPF protocol is 2.' REFERENCE 'OSPF Version 2, Title' | 1.3.6.1.4.1.18.3.5.3.2.3.1.5 | INTEGER | read-only | mandatory |
| wfOspfAreaBdrRtrStatus OBJECT-TYPE 'A flag to note whether this router is an area border router.' REFERENCE 'OSPF Version 2, Section 3 Splitting the AS into Areas' | 1.3.6.1.4.1.18.3.5.3.2.3.1.6 | INTEGER {true(1), false(2)} | read-only | mandatory |
| wfOspfASBdrRtrStatus OBJECT-TYPE 'A flag to note whether this router is an Autonomous System border router.' REFERENCE 'OSPF Version 2, Section 3.3 Classification of routers' | 1.3.6.1.4.1.18.3.5.3.2.3.1.7 | INTEGER {true(1), false(2)} | read-write | mandatory |
| wfOspfTOSSupport OBJECT-TYPE 'The router's support for type-of-service routing.' REFERENCE 'OSPF Version 2, Appendix F.1.2 Optional TOS support' | 1.3.6.1.4.1.18.3.5.3.2.3.1.8 | INTEGER {true(1), false(2)} | read-only | mandatory |
| wfOspfSpfHoldDown OBJECT-TYPE Hold Down Timer for the SPF. The SPF will run at most once per hold down timer value. A value of 0 means no hold down. | 1.3.6.1.4.1.18.3.5.3.2.3.1.9 | INTEGER {defval(1), maximum(10)} | read-write | mandatory |
| wfOspfSlotMask OBJECT-TYPE Slot mask for which slots OSPF is eligible to run on. The MSBit represents slot 1, the next most significant bit represents slot 2, and so on... Slots can be 1-14. Default is all slots on a BCN. | 1.3.6.1.4.1.18.3.5.3.2.3.1.10 | INTEGER {slotmask(4261150720)} | read-write | mandatory |
| wfOspfAreaTable OBJECT-TYPE -- The OSPF Area Data Structure contains information -- regarding the various areas. The interfaces and -- virtual links are configured as part of these areas. -- Area 0.0.0.0, by definition, is the Backbone Area 'Information describing the configured parameters and cumulative statistics of the router's attached areas.' REFERENCE 'OSPF Version 2, Section 6 The Area Data Structure' | 1.3.6.1.4.1.18.3.5.3.2.3.2 | not-accessible | mandatory | |
| wfOspfAreaEntry OBJECT-TYPE 'Information describing the configured parameters and cumulative statistics of one of the router's attached areas.' | 1.3.6.1.4.1.18.3.5.3.2.3.2.1 | not-accessible | mandatory | |
| wfOspfAreaDelete OBJECT-TYPE This value determines if the OSPF router is configured with this area. | 1.3.6.1.4.1.18.3.5.3.2.3.2.1.1 | INTEGER {created(1), deleted(2)} | read-write | mandatory |
| wfOspfAreaDisable OBJECT-TYPE This value indicates the state of this area on the OSPF router. | 1.3.6.1.4.1.18.3.5.3.2.3.2.1.2 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| wfOspfAreaState OBJECT-TYPE This value indicates the state of the OSPF Area. | 1.3.6.1.4.1.18.3.5.3.2.3.2.1.3 | INTEGER {up(1), down(2)} | read-only | mandatory |
| wfOspfAreaId OBJECT-TYPE 'A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters' | 1.3.6.1.4.1.18.3.5.3.2.3.2.1.4 | IpAddress | read-only | mandatory |
| wfOspfAuthType OBJECT-TYPE 'The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis.' REFERENCE 'OSPF Version 2, Appendix E Authentication' -- none (0), -- simplePassword (1) -- reserved for future specification (2..255) -- reserved for AS specific values (> 255) | 1.3.6.1.4.1.18.3.5.3.2.3.2.1.5 | INTEGER {nopassword(1), simplepassword(2)} | read-write | mandatory |
| wfOspfImportASExtern OBJECT-TYPE 'The area's support for importing AS external link- state advertisements.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters' | 1.3.6.1.4.1.18.3.5.3.2.3.2.1.6 | INTEGER {true(1), false(2)} | read-write | mandatory |
| wfOspfStubMetric OBJECT-TYPE 'The metric value applied at the indicated type of service. By default, this equals the least metric at the type of service among the interfaces to other areas.' | 1.3.6.1.4.1.18.3.5.3.2.3.2.1.7 | INTEGER {minimum(1), maximum(16777215)} | read-write | mandatory |
| wfOspfImportSum OBJECT-TYPE 'The area's support for importing Summary advertisements into a stub area. This variable should not be set unless wfOspfImportASExtern is set to FALSE' | 1.3.6.1.4.1.18.3.5.3.2.3.2.1.8 | INTEGER {true(1), false(2)} | read-write | mandatory |
| wfOspfSpfCnt OBJECT-TYPE The number of times the OSPF SPF algorithm has been run for this area. | 1.3.6.1.4.1.18.3.5.3.2.3.2.1.9 | Counter | read-only | mandatory |
| wfOspfLsdbTable OBJECT-TYPE -- OSPF Link State Database -- The Link State Database contains the Link State -- Advertisements from throughout the areas that the -- device is attached to. 'The OSPF Process's Links State Database.' REFERENCE 'OSPF Version 2, Section 12 Link State Advertisements' | 1.3.6.1.4.1.18.3.5.3.2.3.3 | not-accessible | mandatory | |
| wfOspfLsdbEntry OBJECT-TYPE 'A single Link State Advertisement.' | 1.3.6.1.4.1.18.3.5.3.2.3.3.1 | not-accessible | mandatory | |
| wfOspfLsdbAreaId OBJECT-TYPE 'The 32 bit identifier of the Area from which the LSA was received.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters' | 1.3.6.1.4.1.18.3.5.3.2.3.3.1.1 | IpAddress | read-only | mandatory |
| wfOspfLsdbType OBJECT-TYPE 'The type of the link state advertisement. Each link state type has a separate advertisement format.' REFERENCE 'OSPF Version 2, Appendix A.4.1 The Link State Advertisement header' stubLink (0), routerLink (1), networkLink (2), summaryLink (3), asSummaryLink (4), asExternalLink (5) | 1.3.6.1.4.1.18.3.5.3.2.3.3.1.2 | INTEGER {routerlink(1), networklink(2), summarylink(3), assummarylink(4), asexternallink(5)} | read-only | mandatory |
| wfOspfLsdbLSID OBJECT-TYPE 'The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.' REFERENCE 'OSPF Version 2, Section 12.1.4 Link State ID' | 1.3.6.1.4.1.18.3.5.3.2.3.3.1.3 | IpAddress | read-only | mandatory |
| wfOspfLsdbRouterId OBJECT-TYPE 'The 32 bit number that uniquely identifies the originating router in the Autonomous System.' REFERENCE 'OSPF Version 2, Appendix C.1 Global parameters' | 1.3.6.1.4.1.18.3.5.3.2.3.3.1.4 | IpAddress | read-only | mandatory |
| wfOspfLsdbSequence OBJECT-TYPE -- Note that the OSPF Sequence Number is a 32 bit signed -- integer. It starts with the value '80000001'h, -- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h -- Thus, a typical sequence number will be very negative. 'The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.' REFERENCE 'OSPF Version 2, Section 12.1.6 LS sequence number' | 1.3.6.1.4.1.18.3.5.3.2.3.3.1.5 | INTEGER | read-only | mandatory |
| wfOspfLsdbAge OBJECT-TYPE 'This field is the age of the link state advertisement in seconds.' (OSPF_LSDBMINAGE = 0) REFERENCE 'OSPF Version 2, Section 12.1.1 LS age' | 1.3.6.1.4.1.18.3.5.3.2.3.3.1.6 | INTEGER {lsdbmaxage(3600)} | read-only | mandatory |
| wfOspfLsdbChecksum OBJECT-TYPE 'This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.' REFERENCE 'OSPF Version 2, Section 12.1.7 LS checksum' | 1.3.6.1.4.1.18.3.5.3.2.3.3.1.7 | INTEGER | read-only | mandatory |
| wfOspfLsdbAdvLen OBJECT-TYPE 'The length of entire Link State Advertisement, including its header.' REFERENCE 'OSPF Version 2, Section 12 Link State Advertisements' | 1.3.6.1.4.1.18.3.5.3.2.3.3.1.8 | INTEGER | read-only | mandatory |
| wfOspfAreaRangeTable OBJECT-TYPE 'A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters' | 1.3.6.1.4.1.18.3.5.3.2.3.4 | not-accessible | mandatory | |
| wfOspfAreaRangeEntry OBJECT-TYPE | 1.3.6.1.4.1.18.3.5.3.2.3.4.1 | not-accessible | mandatory | |
| wfOspfAreaRangeDelete OBJECT-TYPE This value determines if an Area Range has been configured for the OSPF router. | 1.3.6.1.4.1.18.3.5.3.2.3.4.1.1 | INTEGER {created(1), deleted(2)} | read-write | mandatory |
| wfOspfAreaRangeDisable OBJECT-TYPE 'This variable displays the status of the entry. Setting it to 'DISBALED' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.' | 1.3.6.1.4.1.18.3.5.3.2.3.4.1.2 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| wfOspfAreaRangeState OBJECT-TYPE The state of the OSPF Area Range. | 1.3.6.1.4.1.18.3.5.3.2.3.4.1.3 | INTEGER {up(1), down(2)} | read-only | mandatory |
| wfOspfAreaRangeAreaID OBJECT-TYPE 'The Area the Address Range is to be found within.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters' | 1.3.6.1.4.1.18.3.5.3.2.3.4.1.4 | IpAddress | read-only | mandatory |
| wfOspfAreaRangeNet OBJECT-TYPE 'The IP Address of the Net or Subnet indicated by the range.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters' | 1.3.6.1.4.1.18.3.5.3.2.3.4.1.5 | IpAddress | read-only | mandatory |
| wfOspfAreaRangeMask OBJECT-TYPE 'The Subnet Mask that pertains to the Net or Subnet.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters' | 1.3.6.1.4.1.18.3.5.3.2.3.4.1.6 | IpAddress | read-write | mandatory |
| wfOspfIfTable OBJECT-TYPE -- OSPF Interface Table -- The OSPF Interface Table augments the ifTable with OSPF -- specific information. 'The OSPF Interface Table describes the interfaces from the viewpoint of OSPF.' REFERENCE 'OSPF Version 2, Appendix C.3 Router interface parameters' | 1.3.6.1.4.1.18.3.5.3.2.3.5 | not-accessible | mandatory | |
| wfOspfIfEntry OBJECT-TYPE 'The OSPF Interface Entry describes one interface from the viewpoint of OSPF.' | 1.3.6.1.4.1.18.3.5.3.2.3.5.1 | not-accessible | mandatory | |
| wfOspfIfDelete OBJECT-TYPE This variable determines in an OSPF Interface has been configured on the router. | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.1 | INTEGER {created(1), deleted(2)} | read-write | mandatory |
| wfOspfIfDisable OBJECT-TYPE 'The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.' | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.2 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| wfOspfIfState OBJECT-TYPE 'The OSPF Interface State.' down (1), loopback (2), waiting (3), pointToPoint (4), designatedRouter (5), backupDesignatedRouter (6), otherDesignatedRouter (7) | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.3 | INTEGER {down(1), loopback(2), waiting(3), pointtopoint(4), designatedrouter(5), backupdesignatedrouter(6), otherdesignatedrouter(7)} | read-only | mandatory |
| wfOspfIfIpAddress OBJECT-TYPE 'The IP address of this OSPF interface.' | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.4 | IpAddress | read-only | mandatory |
| wfOspfAddressLessIf OBJECT-TYPE 'For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.' | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.5 | INTEGER | read-only | mandatory |
| wfOspfIfAreaId OBJECT-TYPE 'A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.' default { '00000000'H } -- 0.0.0.0 | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.6 | IpAddress | read-write | mandatory |
| wfOspfIfType OBJECT-TYPE 'The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25, Frame Relay, and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'.' broadcast (1), nbma (2), pointToPoint (3) | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.7 | INTEGER {broadcast(1), nbma(2), pointtopoint(3)} | read-write | mandatory |
| wfOspfIfRtrPriority OBJECT-TYPE 'The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their router id as a tie breaker.' | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.8 | INTEGER {defval(1), maximum(255)} | read-write | mandatory |
| wfOspfIfTransitDelay OBJECT-TYPE 'The estimated number of seconds it takes to transmit a link- state update packet over this interface.' | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.9 | INTEGER {minimum(1), maximum(3600)} | read-write | mandatory |
| wfOspfIfRetransInterval OBJECT-TYPE 'The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets.' | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.10 | INTEGER {minimum(1), defval(5), maximum(3600)} | read-write | mandatory |
| wfOspfIfHelloInterval OBJECT-TYPE 'The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.' | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.11 | INTEGER {minimum(1), defval(10), maximum(65535)} | read-write | mandatory |
| wfOspfIfRtrDeadInterval OBJECT-TYPE 'The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.' | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.12 | INTEGER {minimum(1), defval(40), maximum(2147483647)} | read-write | mandatory |
| wfOspfIfPollInterval OBJECT-TYPE 'The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi- access neighbor.' | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.13 | INTEGER {minimum(1), defval(120), maximum(2147483647)} | read-write | mandatory |
| wfOspfIfDesignatedRouter OBJECT-TYPE 'The IP Address of the Designated Router.' default { '00000000'H } -- 0.0.0.0 | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.14 | IpAddress | read-only | mandatory |
| wfOspfIfBackupDesignatedRouter OBJECT-TYPE 'The IP Address of the Backup Designated Router.' default { '00000000'H } -- 0.0.0.0 | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.15 | IpAddress | read-only | mandatory |
| wfOspfIfMetricCost OBJECT-TYPE 'The cost of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. The value FFFF is distinguished to mean 'no route via this TOS'.' | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.16 | INTEGER {minimum(1), maximum(65535)} | read-write | mandatory |
| wfOspfIfAuthKey OBJECT-TYPE 'The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, ospfIfAuthKey always returns an Octet String of length zero.' default { '0000000000000000'H } -- 0.0.0.0.0.0.0.0 REFERENCE 'OSPF Version 2, Section 9 The Interface Data Structure' | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.17 | OCTET STRING | read-write | mandatory |
| wfOspfIfTxHellos OBJECT-TYPE Number of OSPF Hello packets transmitted. | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.18 | Counter | read-only | mandatory |
| wfOspfIfTxDBDescripts OBJECT-TYPE Number of OSPF DataBase Description packets transmitted. | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.19 | Counter | read-only | mandatory |
| wfOspfIfTxLinkStateReqs OBJECT-TYPE Number of OSPF Link State Request packets transmitted. | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.20 | Counter | read-only | mandatory |
| wfOspfIfTxLinkStateUpds OBJECT-TYPE Number of OSPF Link State Update packets transmitted. | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.21 | Counter | read-only | mandatory |
| wfOspfIfTxLinkStateAcks OBJECT-TYPE Number of OSPF Link States Acknowledgements transmitted. | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.22 | Counter | read-only | mandatory |
| wfOspfIfRxHellos OBJECT-TYPE Number of OSPF Hello packets received. | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.23 | Counter | read-only | mandatory |
| wfOspfIfRxDBDescripts OBJECT-TYPE Number of OSPF DataBase Description packets received. | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.24 | Counter | read-only | mandatory |
| wfOspfIfRxLinkStateReqs OBJECT-TYPE Number of OSPF Link State Requests received. | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.25 | Counter | read-only | mandatory |
| wfOspfIfRxLinkStateUpds OBJECT-TYPE Number of OSPF Link State Updates received. | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.26 | Counter | read-only | mandatory |
| wfOspfIfRxLinkStateAcks OBJECT-TYPE Number of OSPF Link State Acknowledgements received. | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.27 | Counter | read-only | mandatory |
| wfOspfIfDrops OBJECT-TYPE Number of OSPF packets dropped because of invalid information in the packet. | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.28 | Counter | read-only | mandatory |
| wfOspfMtuSize OBJECT-TYPE Configure MTU size per OSPF inreface | 1.3.6.1.4.1.18.3.5.3.2.3.5.1.29 | INTEGER {defval(1), min(2), maximum(10000)} | read-write | mandatory |
| wfOspfVirtIfTable OBJECT-TYPE -- OSPF Virtual Interface Table -- The Virtual Interface Table describes the virtual -- links that the OSPF Process is configured to -- carry on. 'Information about this router's virtual interfaces.' REFERENCE 'OSPF Version 2, Appendix C.4 Virtual link parameters' | 1.3.6.1.4.1.18.3.5.3.2.3.6 | not-accessible | mandatory | |
| wfOspfVirtIfEntry OBJECT-TYPE 'Information about a single Virtual Interface.' | 1.3.6.1.4.1.18.3.5.3.2.3.6.1 | not-accessible | mandatory | |
| wfOspfVirtIfDelete OBJECT-TYPE | 1.3.6.1.4.1.18.3.5.3.2.3.6.1.1 | INTEGER {created(1), deleted(2)} | read-write | mandatory |
| wfOspfVirtIfDisable OBJECT-TYPE 'This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.' | 1.3.6.1.4.1.18.3.5.3.2.3.6.1.2 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| wfOspfVirtIfState OBJECT-TYPE 'OSPF virtual interface states.' down (1), -- these use the same encoding pointToPoint (4) -- as the ospfIfTable | 1.3.6.1.4.1.18.3.5.3.2.3.6.1.3 | INTEGER {down(1), pointtopoint(4)} | read-only | mandatory |
| wfOspfVirtIfAreaID OBJECT-TYPE 'The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0' | 1.3.6.1.4.1.18.3.5.3.2.3.6.1.4 | IpAddress | read-only | mandatory |
| wfOspfVirtIfNeighbor OBJECT-TYPE 'The Router ID of the Virtual Neighbor.' | 1.3.6.1.4.1.18.3.5.3.2.3.6.1.5 | IpAddress | read-only | mandatory |
| wfOspfVirtIfTransitDelay OBJECT-TYPE 'The estimated number of seconds it takes to transmit a link- state update packet over this interface.' | 1.3.6.1.4.1.18.3.5.3.2.3.6.1.6 | INTEGER {minimum(1), maximum(3600)} | read-write | mandatory |
| wfOspfVirtIfRetransInterval OBJECT-TYPE 'The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. This value should be well over the expected round-trip time.' | 1.3.6.1.4.1.18.3.5.3.2.3.6.1.7 | INTEGER {minimum(1), defval(5), maximum(3600)} | read-write | mandatory |
| wfOspfVirtIfHelloInterval OBJECT-TYPE 'The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.' | 1.3.6.1.4.1.18.3.5.3.2.3.6.1.8 | INTEGER {minimum(1), defval(15), maximum(65535)} | read-write | mandatory |
| wfOspfVirtIfRtrDeadInterval OBJECT-TYPE 'The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor.' | 1.3.6.1.4.1.18.3.5.3.2.3.6.1.9 | INTEGER {minimum(1), defval(60), maximum(2147483647)} | read-write | mandatory |
| wfOspfVirtIfAuthKey OBJECT-TYPE 'If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, ospfVifAuthKey always returns a string of length zero.' REFERENCE 'OSPF Version 2, Section 9 The Interface Data Structure' | 1.3.6.1.4.1.18.3.5.3.2.3.6.1.10 | OCTET STRING | read-write | mandatory |
| wfOspfVirtIfTxHellos OBJECT-TYPE Number of OSPF Hello packets transmitted on Virtual Interfaces. | 1.3.6.1.4.1.18.3.5.3.2.3.6.1.11 | Counter | read-only | mandatory |
| wfOspfVirtIfTxDBDescripts OBJECT-TYPE Number of OSPF DataBase Description packets transmitted on Virtual Interfaces. | 1.3.6.1.4.1.18.3.5.3.2.3.6.1.12 | Counter | read-only | mandatory |
| wfOspfVirtIfTxLinkStateReqs OBJECT-TYPE Number of OSPF Link State Request packets transmitted on Virtual Interfaces. | 1.3.6.1.4.1.18.3.5.3.2.3.6.1.13 | Counter | read-only | mandatory |
| wfOspfVirtIfTxLinkStateUpds OBJECT-TYPE Number of OSPF Link State Update packets transmitted on Virtual Interfaces. | 1.3.6.1.4.1.18.3.5.3.2.3.6.1.14 | Counter | read-only | mandatory |
| wfOspfVirtIfTxLinkStateAcks OBJECT-TYPE Number of OSPF Link State Acknowledgement packets transmitted on Virtual Interfaces. | 1.3.6.1.4.1.18.3.5.3.2.3.6.1.15 | Counter | read-only | mandatory |
| wfOspfVirtIfRxHellos OBJECT-TYPE Number of OSPF Hello packets received on Virtual Interfaces. | 1.3.6.1.4.1.18.3.5.3.2.3.6.1.16 | Counter | read-only | mandatory |
| wfOspfVirtIfRxDBDescripts OBJECT-TYPE Number of OSPF DataBase Description packets received on Virtual Interfaces. | 1.3.6.1.4.1.18.3.5.3.2.3.6.1.17 | Counter | read-only | mandatory |
| wfOspfVirtIfRxLinkStateReqs OBJECT-TYPE Number of OSPF Link State Request packets recieved on Virtual Interfaces. | 1.3.6.1.4.1.18.3.5.3.2.3.6.1.18 | Counter | read-only | mandatory |
| wfOspfVirtIfRxLinkStateUpds OBJECT-TYPE Number of OSPF Link State Update packets received on Virtual Interfaces. | 1.3.6.1.4.1.18.3.5.3.2.3.6.1.19 | Counter | read-only | mandatory |
| wfOspfVirtIfRxLinkStateAcks OBJECT-TYPE Number of OSPF Link State Acknowledgement packets received on Virtual Interfaces. | 1.3.6.1.4.1.18.3.5.3.2.3.6.1.20 | Counter | read-only | mandatory |
| wfOspfVirtIfDrops OBJECT-TYPE Number of OSPF packets dropped on Virtual Interfaces. | 1.3.6.1.4.1.18.3.5.3.2.3.6.1.21 | Counter | read-only | mandatory |
| wfOspfNbrTable OBJECT-TYPE -- OSPF Neighbor Table -- The OSPF Neighbor Table describes all neighbors in -- the locality of the subject router. 'A table of non-virtual neighbor information.' REFERENCE 'OSPF Version 2, Section 10 The Neighbor Data Structure' | 1.3.6.1.4.1.18.3.5.3.2.3.7 | not-accessible | mandatory | |
| wfOspfNbrEntry OBJECT-TYPE 'The information regarding a single neighbor.' REFERENCE 'OSPF Version 2, Section 10 The Neighbor Data Structure' | 1.3.6.1.4.1.18.3.5.3.2.3.7.1 | not-accessible | mandatory | |
| wfOspfNbrDelete OBJECT-TYPE This variable indicates the existence of a static OSPF neighbor. | 1.3.6.1.4.1.18.3.5.3.2.3.7.1.1 | INTEGER {created(1), deleted(2)} | read-write | mandatory |
| wfOspfNbrDisable OBJECT-TYPE 'This variable displays the status of the entry. Setting it to 'DISABLED' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.' | 1.3.6.1.4.1.18.3.5.3.2.3.7.1.2 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| wfOspfNbrState OBJECT-TYPE 'The State of the relationship with this Neighbor.' REFERENCE 'OSPF Version 2, Section 10.1 Neighbor States' down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8) | 1.3.6.1.4.1.18.3.5.3.2.3.7.1.3 | INTEGER {down(1), attempt(2), init(3), twoway(4), exchangstart(5), exchange(6), loading(7), full(8)} | read-only | mandatory |
| wfOspfNbrIpAddr OBJECT-TYPE 'The IP address of this neighbor.' | 1.3.6.1.4.1.18.3.5.3.2.3.7.1.4 | IpAddress | read-only | mandatory |
| wfOspfNbrIfAddr OBJECT-TYPE 'The Interface IP address for this neighbor.' | 1.3.6.1.4.1.18.3.5.3.2.3.7.1.5 | IpAddress | read-write | mandatory |
| wfOspfNbrAddressLessIndex OBJECT-TYPE ' On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.' | 1.3.6.1.4.1.18.3.5.3.2.3.7.1.6 | INTEGER | read-only | mandatory |
| wfOspfNbrRtrId OBJECT-TYPE 'A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System.' default { '00000000'H } -- 0.0.0.0 | 1.3.6.1.4.1.18.3.5.3.2.3.7.1.7 | IpAddress | read-only | mandatory |
| wfOspfNbrOptions OBJECT-TYPE 'A Bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information; if zero, it is a stub area. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric.' REFERENCE 'OSPF Version 2, Section 12.1.2 Options' | 1.3.6.1.4.1.18.3.5.3.2.3.7.1.8 | INTEGER | read-only | mandatory |
| wfOspfNbrPriority OBJECT-TYPE 'The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.' | 1.3.6.1.4.1.18.3.5.3.2.3.7.1.9 | INTEGER {defval(1), maximum(255)} | read-write | mandatory |
| wfOspfNbrEvents OBJECT-TYPE 'The number of times this neighbor relationship has changed state, or an error has occurred.' | 1.3.6.1.4.1.18.3.5.3.2.3.7.1.10 | Counter | read-only | mandatory |
| wfOspfNbrLSRetransQLen OBJECT-TYPE 'The current length of the retransmission queue.' | 1.3.6.1.4.1.18.3.5.3.2.3.7.1.11 | Gauge | read-only | mandatory |
| wfOspfVirtNbrTable OBJECT-TYPE -- WFOSPF Virtual Neighbor Table -- This table describes all virtual neighbors. -- Since Virtual Links are configured in the -- virtual interface table, this table is read-only. 'A table of virtual neighbor information.' REFERENCE 'OSPF Version 2, ' | 1.3.6.1.4.1.18.3.5.3.2.3.8 | not-accessible | mandatory | |
| wfOspfVirtNbrEntry OBJECT-TYPE 'Virtual neighbor information.' REFERENCE 'OSPF Version 2, ' | 1.3.6.1.4.1.18.3.5.3.2.3.8.1 | not-accessible | mandatory | |
| wfOspfVirtNbrArea OBJECT-TYPE 'The Transit Area Identifier.' | 1.3.6.1.4.1.18.3.5.3.2.3.8.1.1 | IpAddress | read-only | mandatory |
| wfOspfVirtNbrRtrId OBJECT-TYPE 'A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.' | 1.3.6.1.4.1.18.3.5.3.2.3.8.1.2 | IpAddress | read-only | mandatory |
| wfOspfVirtNbrIpAddr OBJECT-TYPE 'The IP address this Virtual Neighbor is using.' | 1.3.6.1.4.1.18.3.5.3.2.3.8.1.3 | IpAddress | read-only | mandatory |
| wfOspfVirtNbrOptions OBJECT-TYPE 'A bit map corresponding to the neighbor's options field. Thus, Bit 1, if set, indicates that the neighbor supports Type of Service Routing; if zero, no metrics other than TOS 0 are in use by the neighbor.' | 1.3.6.1.4.1.18.3.5.3.2.3.8.1.4 | INTEGER | read-only | mandatory |
| wfOspfVirtNbrState OBJECT-TYPE 'The state of the Virtual Neighbor Relationship.' down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8) | 1.3.6.1.4.1.18.3.5.3.2.3.8.1.5 | INTEGER {down(1), attempt(2), init(3), twoway(4), exchangstart(5), exchange(6), loading(7), full(8)} | read-only | mandatory |
| wfOspfVirtNbrEvents OBJECT-TYPE 'The number of times this virtual link has changed its state, or an error has occurred.' | 1.3.6.1.4.1.18.3.5.3.2.3.8.1.6 | Counter | read-only | mandatory |
| wfOspfVirtNbrLSRetransQLen OBJECT-TYPE 'The current length of the retransmission queue.' | 1.3.6.1.4.1.18.3.5.3.2.3.8.1.7 | Gauge | read-only | mandatory |
| wfOspfDynNbrTable OBJECT-TYPE -- OSPF Dynamic Neighbor Table -- The OSPF Dynamic Neighbor Table describes all neighbors in -- the locality of the subject router learned during operation. 'A table of non-virtual neighbor information.' REFERENCE 'OSPF Version 2, Section 10 The Neighbor Data Structure' | 1.3.6.1.4.1.18.3.5.3.2.3.9 | not-accessible | mandatory | |
| wfOspfDynNbrEntry OBJECT-TYPE 'The information regarding a single neighbor.' REFERENCE 'OSPF Version 2, Section 10 The Neighbor Data Structure' | 1.3.6.1.4.1.18.3.5.3.2.3.9.1 | not-accessible | mandatory | |
| wfOspfDynNbrState OBJECT-TYPE 'The State of the relationship with this Neighbor.' REFERENCE 'OSPF Version 2, Section 10.1 Neighbor States' down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8) | 1.3.6.1.4.1.18.3.5.3.2.3.9.1.1 | INTEGER {down(1), attempt(2), init(3), twoway(4), exchangstart(5), exchange(6), loading(7), full(8)} | read-only | mandatory |
| wfOspfDynNbrIpAddr OBJECT-TYPE 'The IP address of this neighbor.' | 1.3.6.1.4.1.18.3.5.3.2.3.9.1.2 | IpAddress | read-only | mandatory |
| wfOspfDynNbrIfAddr OBJECT-TYPE 'The Interface IP address for this neighbor.' | 1.3.6.1.4.1.18.3.5.3.2.3.9.1.3 | IpAddress | read-only | mandatory |
| wfOspfDynNbrAddressLessIndex OBJECT-TYPE ' On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.' | 1.3.6.1.4.1.18.3.5.3.2.3.9.1.4 | INTEGER | read-only | mandatory |
| wfOspfDynNbrRtrId OBJECT-TYPE 'A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System.' default { '00000000'H } -- 0.0.0.0 | 1.3.6.1.4.1.18.3.5.3.2.3.9.1.5 | IpAddress | read-only | mandatory |
| wfOspfDynNbrOptions OBJECT-TYPE 'A Bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information; if zero, it is a stub area. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric.' REFERENCE 'OSPF Version 2, Section 12.1.2 Options' | 1.3.6.1.4.1.18.3.5.3.2.3.9.1.6 | INTEGER | read-only | mandatory |
| wfOspfDynNbrPriority OBJECT-TYPE 'The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.' | 1.3.6.1.4.1.18.3.5.3.2.3.9.1.7 | INTEGER | read-only | mandatory |
| wfOspfDynNbrEvents OBJECT-TYPE 'The number of times this neighbor relationship has changed state, or an error has occurred.' | 1.3.6.1.4.1.18.3.5.3.2.3.9.1.8 | Counter | read-only | mandatory |
| wfOspfDynNbrLSRetransQLen OBJECT-TYPE 'The current length of the retransmission queue.' | 1.3.6.1.4.1.18.3.5.3.2.3.9.1.9 | Gauge | read-only | mandatory |