RFC1253-MIB
- Namespace
- standard
- Source file
RFC1253-MIB- Digest
sha256:8e27311b833379cee68636a8cd0d2edf22f1d8dfa6b357a84844cdd8df9c66dd
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso, mib-2 |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
RFC1253-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| AreaID type | ||||
| BigMetric type | ||||
| DesignatedRouterPriority type | ||||
| HelloRange type | ||||
| InterfaceIndex type | ||||
| Metric type | ||||
| PositiveInteger type | ||||
| RouterID type | ||||
| Status type | ||||
| TOSType type | ||||
| TruthValue type | ||||
| UpToMaxAge type | ||||
| Validation type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ospf OBJECT-IDENTITY | 1.3.6.1.2.1.14 | |||
| ospfGeneralGroup OBJECT-IDENTITY | 1.3.6.1.2.1.14.1 | |||
| ospfRouterId OBJECT-TYPE A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses. | 1.3.6.1.2.1.14.1.1 | RouterID | read-write | mandatory |
| ospfAdminStat OBJECT-TYPE The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it on all interfaces. | 1.3.6.1.2.1.14.1.2 | Status | read-write | mandatory |
| ospfVersionNumber OBJECT-TYPE The current version number of the OSPF protocol is 2. | 1.3.6.1.2.1.14.1.3 | INTEGER {version2(2)} | read-only | mandatory |
| ospfAreaBdrRtrStatus OBJECT-TYPE A flag to note whether this router is an area border router. | 1.3.6.1.2.1.14.1.4 | TruthValue | read-only | mandatory |
| ospfASBdrRtrStatus OBJECT-TYPE A flag to note whether this router is an Autonomous System border router. | 1.3.6.1.2.1.14.1.5 | TruthValue | read-write | mandatory |
| ospfExternLSACount OBJECT-TYPE The number of external (LS type 5) link-state advertisements in the link-state database. | 1.3.6.1.2.1.14.1.6 | Gauge | read-only | mandatory |
| ospfExternLSACksumSum OBJECT-TYPE The 32-bit unsigned sum of the LS checksums of the external link-state advertisements contained in the link-state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. | 1.3.6.1.2.1.14.1.7 | INTEGER | read-only | mandatory |
| ospfTOSSupport OBJECT-TYPE The router's support for type-of-service routing. | 1.3.6.1.2.1.14.1.8 | TruthValue | read-write | mandatory |
| ospfOriginateNewLSAs OBJECT-TYPE The number of new link-state advertisements that have been originated. This number is incremented each time the router originates a new LSA. | 1.3.6.1.2.1.14.1.9 | Counter | read-only | mandatory |
| ospfRxNewLSAs OBJECT-TYPE The number of link-state advertisements received determined to be new instantiations. This number does not include newer instantiations of self-originated link-state advertisements. | 1.3.6.1.2.1.14.1.10 | Counter | read-only | mandatory |
| ospfAreaTable OBJECT-TYPE Information describing the configured parameters and cumulative statistics of the router's attached areas. | 1.3.6.1.2.1.14.2 | not-accessible | mandatory | |
| ospfAreaEntry OBJECT-TYPE Information describing the configured parameters and cumulative statistics of one of the router's attached areas. | 1.3.6.1.2.1.14.2.1 | not-accessible | mandatory | |
| ospfAreaId OBJECT-TYPE A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. | 1.3.6.1.2.1.14.2.1.1 | AreaID | read-write | mandatory |
| ospfAuthType OBJECT-TYPE The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis. | 1.3.6.1.2.1.14.2.1.2 | INTEGER | read-write | mandatory |
| ospfImportASExtern OBJECT-TYPE The area's support for importing AS external link- state advertisements. | 1.3.6.1.2.1.14.2.1.3 | TruthValue | read-write | mandatory |
| ospfSpfRuns OBJECT-TYPE The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm. | 1.3.6.1.2.1.14.2.1.4 | Counter | read-only | mandatory |
| ospfAreaBdrRtrCount OBJECT-TYPE The total number of area border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. | 1.3.6.1.2.1.14.2.1.5 | Gauge | read-only | mandatory |
| ospfASBdrRtrCount OBJECT-TYPE The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. | 1.3.6.1.2.1.14.2.1.6 | Gauge | read-only | mandatory |
| ospfAreaLSACount OBJECT-TYPE The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's. | 1.3.6.1.2.1.14.2.1.7 | Gauge | read-only | mandatory |
| ospfAreaLSACksumSum OBJECT-TYPE The 32-bit unsigned sum of the link-state advertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. | 1.3.6.1.2.1.14.2.1.8 | INTEGER | read-only | mandatory |
| ospfStubAreaTable OBJECT-TYPE The set of metrics that will be advertised by a default Area Border Router into a stub area. | 1.3.6.1.2.1.14.3 | not-accessible | mandatory | |
| ospfStubAreaEntry OBJECT-TYPE The metric for a given Type of Service that will be advertised by a default Area Border Router into a stub area. | 1.3.6.1.2.1.14.3.1 | not-accessible | mandatory | |
| ospfStubAreaID OBJECT-TYPE The 32 bit identifier for the Stub Area. On creation, this can be derived from the instance. | 1.3.6.1.2.1.14.3.1.1 | AreaID | read-write | mandatory |
| ospfStubTOS OBJECT-TYPE The Type of Service associated with the metric. On creation, this can be derived from the instance. | 1.3.6.1.2.1.14.3.1.2 | TOSType | read-write | mandatory |
| ospfStubMetric OBJECT-TYPE The metric value applied at the indicated type of service. By default, this equals the least metric at the type of service among the interfaces to other areas. | 1.3.6.1.2.1.14.3.1.3 | BigMetric | read-write | mandatory |
| ospfStubStatus OBJECT-TYPE This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. | 1.3.6.1.2.1.14.3.1.4 | Validation | read-write | mandatory |
| ospfLsdbTable OBJECT-TYPE The OSPF Process's Links State Database. | 1.3.6.1.2.1.14.4 | not-accessible | mandatory | |
| ospfLsdbEntry OBJECT-TYPE A single Link State Advertisement. | 1.3.6.1.2.1.14.4.1 | not-accessible | mandatory | |
| ospfLsdbAreaId OBJECT-TYPE The 32 bit identifier of the Area from which the LSA was received. | 1.3.6.1.2.1.14.4.1.1 | AreaID | read-only | mandatory |
| ospfLsdbType OBJECT-TYPE The type of the link state advertisement. Each link state type has a separate advertisement format. | 1.3.6.1.2.1.14.4.1.2 | INTEGER {routerLink(1), networkLink(2), summaryLink(3), asSummaryLink(4), asExternalLink(5)} | read-only | mandatory |
| ospfLsdbLSID OBJECT-TYPE The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. | 1.3.6.1.2.1.14.4.1.3 | IpAddress | read-only | mandatory |
| ospfLsdbRouterId OBJECT-TYPE The 32 bit number that uniquely identifies the originating router in the Autonomous System. | 1.3.6.1.2.1.14.4.1.4 | RouterID | read-only | mandatory |
| ospfLsdbSequence OBJECT-TYPE The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. | 1.3.6.1.2.1.14.4.1.5 | INTEGER | read-only | mandatory |
| ospfLsdbAge OBJECT-TYPE This field is the age of the link state advertisement in seconds. | 1.3.6.1.2.1.14.4.1.6 | INTEGER | read-only | mandatory |
| ospfLsdbChecksum OBJECT-TYPE This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. | 1.3.6.1.2.1.14.4.1.7 | INTEGER | read-only | mandatory |
| ospfLsdbAdvertisement OBJECT-TYPE The entire Link State Advertisement, including its header. | 1.3.6.1.2.1.14.4.1.8 | OCTET STRING | read-only | mandatory |
| ospfAreaRangeTable OBJECT-TYPE A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255 | 1.3.6.1.2.1.14.5 | not-accessible | mandatory | |
| ospfAreaRangeEntry OBJECT-TYPE A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255 | 1.3.6.1.2.1.14.5.1 | not-accessible | mandatory | |
| ospfAreaRangeAreaID OBJECT-TYPE The Area the Address Range is to be found within. | 1.3.6.1.2.1.14.5.1.1 | AreaID | read-write | mandatory |
| ospfAreaRangeNet OBJECT-TYPE The IP Address of the Net or Subnet indicated by the range. | 1.3.6.1.2.1.14.5.1.2 | IpAddress | read-write | mandatory |
| ospfAreaRangeMask OBJECT-TYPE The Subnet Mask that pertains to the Net or Subnet. | 1.3.6.1.2.1.14.5.1.3 | IpAddress | read-write | mandatory |
| ospfAreaRangeStatus OBJECT-TYPE This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. | 1.3.6.1.2.1.14.5.1.4 | Validation | read-write | mandatory |
| ospfHostTable OBJECT-TYPE The list of Hosts, and their metrics, that the router will advertise as host routes. | 1.3.6.1.2.1.14.6 | not-accessible | mandatory | |
| ospfHostEntry OBJECT-TYPE A metric to be advertised, for a given type of service, when a given host is reachable. | 1.3.6.1.2.1.14.6.1 | not-accessible | mandatory | |
| ospfHostIpAddress OBJECT-TYPE The IP Address of the Host. | 1.3.6.1.2.1.14.6.1.1 | IpAddress | read-write | mandatory |
| ospfHostTOS OBJECT-TYPE The Type of Service of the route being configured. | 1.3.6.1.2.1.14.6.1.2 | TOSType | read-write | mandatory |
| ospfHostMetric OBJECT-TYPE The Metric to be advertised. | 1.3.6.1.2.1.14.6.1.3 | Metric | read-write | mandatory |
| ospfHostStatus OBJECT-TYPE This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. | 1.3.6.1.2.1.14.6.1.4 | Validation | read-write | mandatory |
| ospfIfTable OBJECT-TYPE The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. | 1.3.6.1.2.1.14.7 | not-accessible | mandatory | |
| ospfIfEntry OBJECT-TYPE The OSPF Interface Entry describes one interface from the viewpoint of OSPF. | 1.3.6.1.2.1.14.7.1 | not-accessible | mandatory | |
| ospfIfIpAddress OBJECT-TYPE The IP address of this OSPF interface. | 1.3.6.1.2.1.14.7.1.1 | IpAddress | read-write | mandatory |
| ospfAddressLessIf OBJECT-TYPE For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address. | 1.3.6.1.2.1.14.7.1.2 | INTEGER | read-write | mandatory |
| ospfIfAreaId OBJECT-TYPE A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. | 1.3.6.1.2.1.14.7.1.3 | AreaID | read-write | mandatory |
| ospfIfType OBJECT-TYPE The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25, Frame Relay, and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'. | 1.3.6.1.2.1.14.7.1.4 | INTEGER {broadcast(1), nbma(2), pointToPoint(3)} | read-write | mandatory |
| ospfIfAdminStat OBJECT-TYPE The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF. | 1.3.6.1.2.1.14.7.1.5 | Status | read-write | mandatory |
| ospfIfRtrPriority OBJECT-TYPE The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their router id as a tie breaker. | 1.3.6.1.2.1.14.7.1.6 | DesignatedRouterPriority | read-write | mandatory |
| ospfIfTransitDelay OBJECT-TYPE The estimated number of seconds it takes to transmit a link- state update packet over this interface. | 1.3.6.1.2.1.14.7.1.7 | UpToMaxAge | read-write | mandatory |
| ospfIfRetransInterval OBJECT-TYPE The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. | 1.3.6.1.2.1.14.7.1.8 | UpToMaxAge | read-write | mandatory |
| ospfIfHelloInterval OBJECT-TYPE The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network. | 1.3.6.1.2.1.14.7.1.9 | HelloRange | read-write | mandatory |
| ospfIfRtrDeadInterval OBJECT-TYPE The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network. | 1.3.6.1.2.1.14.7.1.10 | PositiveInteger | read-write | mandatory |
| ospfIfPollInterval OBJECT-TYPE The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi- access neighbor. | 1.3.6.1.2.1.14.7.1.11 | PositiveInteger | read-write | mandatory |
| ospfIfState OBJECT-TYPE The OSPF Interface State. | 1.3.6.1.2.1.14.7.1.12 | INTEGER {down(1), loopback(2), waiting(3), pointToPoint(4), designatedRouter(5), backupDesignatedRouter(6), otherDesignatedRouter(7)} | read-only | mandatory |
| ospfIfDesignatedRouter OBJECT-TYPE The IP Address of the Designated Router. | 1.3.6.1.2.1.14.7.1.13 | IpAddress | read-only | mandatory |
| ospfIfBackupDesignatedRouter OBJECT-TYPE The IP Address of the Backup Designated Router. | 1.3.6.1.2.1.14.7.1.14 | IpAddress | read-only | mandatory |
| ospfIfEvents OBJECT-TYPE The number of times this OSPF interface has changed its state, or an error has occurred. | 1.3.6.1.2.1.14.7.1.15 | Counter | read-only | mandatory |
| ospfIfAuthKey OBJECT-TYPE The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, ospfIfAuthKey always returns an Octet String of length zero. | 1.3.6.1.2.1.14.7.1.16 | OCTET STRING | read-write | mandatory |
| ospfIfMetricTable OBJECT-TYPE The TOS metrics for a non-virtual interface identified by the interface index. | 1.3.6.1.2.1.14.8 | not-accessible | mandatory | |
| ospfIfMetricEntry OBJECT-TYPE A particular TOS metric for a non-virtual interface identified by the interface index. | 1.3.6.1.2.1.14.8.1 | not-accessible | mandatory | |
| ospfIfMetricIpAddress OBJECT-TYPE The IP address of this OSPF interface. On row creation, this can be derived from the instance. | 1.3.6.1.2.1.14.8.1.1 | IpAddress | read-write | mandatory |
| ospfIfMetricAddressLessIf OBJECT-TYPE For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the value of ifIndex for interfaces having no IP Address. On row creation, this can be derived from the instance. | 1.3.6.1.2.1.14.8.1.2 | INTEGER | read-write | mandatory |
| ospfIfMetricTOS OBJECT-TYPE The type of service metric being referenced. On row creation, this can be derived from the instance. | 1.3.6.1.2.1.14.8.1.3 | TOSType | read-write | mandatory |
| ospfIfMetricMetric OBJECT-TYPE The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. The value FFFF is distinguished to mean 'no route via this TOS'. | 1.3.6.1.2.1.14.8.1.4 | Metric | read-write | mandatory |
| ospfIfMetricStatus OBJECT-TYPE This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. | 1.3.6.1.2.1.14.8.1.5 | Validation | read-write | mandatory |
| ospfVirtIfTable OBJECT-TYPE Information about this router's virtual interfaces. | 1.3.6.1.2.1.14.9 | not-accessible | mandatory | |
| ospfVirtIfEntry OBJECT-TYPE Information about a single Virtual Interface. | 1.3.6.1.2.1.14.9.1 | not-accessible | mandatory | |
| ospfVirtIfAreaID OBJECT-TYPE The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 | 1.3.6.1.2.1.14.9.1.1 | AreaID | read-write | mandatory |
| ospfVirtIfNeighbor OBJECT-TYPE The Router ID of the Virtual Neighbor. | 1.3.6.1.2.1.14.9.1.2 | RouterID | read-write | mandatory |
| ospfVirtIfTransitDelay OBJECT-TYPE The estimated number of seconds it takes to transmit a link- state update packet over this interface. | 1.3.6.1.2.1.14.9.1.3 | UpToMaxAge | read-write | mandatory |
| ospfVirtIfRetransInterval OBJECT-TYPE The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. This value should be well over the expected round-trip time. | 1.3.6.1.2.1.14.9.1.4 | UpToMaxAge | read-write | mandatory |
| ospfVirtIfHelloInterval OBJECT-TYPE The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor. | 1.3.6.1.2.1.14.9.1.5 | HelloRange | read-write | mandatory |
| ospfVirtIfRtrDeadInterval OBJECT-TYPE The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor. | 1.3.6.1.2.1.14.9.1.6 | PositiveInteger | read-write | mandatory |
| ospfVirtIfState OBJECT-TYPE OSPF virtual interface states. | 1.3.6.1.2.1.14.9.1.7 | INTEGER {down(1), pointToPoint(4)} | read-only | mandatory |
| ospfVirtIfEvents OBJECT-TYPE The number of state changes or error events on this Virtual Link | 1.3.6.1.2.1.14.9.1.8 | Counter | read-only | mandatory |
| ospfVirtIfAuthKey OBJECT-TYPE If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, ospfVifAuthKey always returns a string of length zero. | 1.3.6.1.2.1.14.9.1.9 | OCTET STRING | read-write | mandatory |
| ospfVirtIfStatus OBJECT-TYPE This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. | 1.3.6.1.2.1.14.9.1.10 | Validation | read-write | mandatory |
| ospfNbrTable OBJECT-TYPE A table of non-virtual neighbor information. | 1.3.6.1.2.1.14.10 | not-accessible | mandatory | |
| ospfNbrEntry OBJECT-TYPE The information regarding a single neighbor. | 1.3.6.1.2.1.14.10.1 | not-accessible | mandatory | |
| ospfNbrIpAddr OBJECT-TYPE The IP address of this neighbor. | 1.3.6.1.2.1.14.10.1.1 | IpAddress | read-write | mandatory |
| ospfNbrAddressLessIndex OBJECT-TYPE On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance. | 1.3.6.1.2.1.14.10.1.2 | InterfaceIndex | read-write | mandatory |
| ospfNbrRtrId OBJECT-TYPE A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System. | 1.3.6.1.2.1.14.10.1.3 | RouterID | read-only | mandatory |
| ospfNbrOptions OBJECT-TYPE A Bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information; if zero, it is a stub area. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. | 1.3.6.1.2.1.14.10.1.4 | INTEGER | read-only | mandatory |
| ospfNbrPriority OBJECT-TYPE The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network. | 1.3.6.1.2.1.14.10.1.5 | DesignatedRouterPriority | read-write | mandatory |
| ospfNbrState OBJECT-TYPE The State of the relationship with this Neighbor. | 1.3.6.1.2.1.14.10.1.6 | INTEGER {down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full(8)} | read-only | mandatory |
| ospfNbrEvents OBJECT-TYPE The number of times this neighbor relationship has changed state, or an error has occurred. | 1.3.6.1.2.1.14.10.1.7 | Counter | read-only | mandatory |
| ospfNbrLSRetransQLen OBJECT-TYPE The current length of the retransmission queue. | 1.3.6.1.2.1.14.10.1.8 | Gauge | read-only | mandatory |
| ospfNBMANbrStatus OBJECT-TYPE This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. | 1.3.6.1.2.1.14.10.1.9 | Validation | read-write | mandatory |
| ospfVirtNbrTable OBJECT-TYPE A table of virtual neighbor information. | 1.3.6.1.2.1.14.11 | not-accessible | mandatory | |
| ospfVirtNbrEntry OBJECT-TYPE Virtual neighbor information. | 1.3.6.1.2.1.14.11.1 | not-accessible | mandatory | |
| ospfVirtNbrArea OBJECT-TYPE The Transit Area Identifier. | 1.3.6.1.2.1.14.11.1.1 | AreaID | read-only | mandatory |
| ospfVirtNbrRtrId OBJECT-TYPE A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. | 1.3.6.1.2.1.14.11.1.2 | RouterID | read-only | mandatory |
| ospfVirtNbrIpAddr OBJECT-TYPE The IP address this Virtual Neighbor is using. | 1.3.6.1.2.1.14.11.1.3 | IpAddress | read-only | mandatory |
| ospfVirtNbrOptions OBJECT-TYPE A bit map corresponding to the neighbor's options field. Thus, Bit 1, if set, indicates that the neighbor supports Type of Service Routing; if zero, no metrics other than TOS 0 are in use by the neighbor. | 1.3.6.1.2.1.14.11.1.4 | INTEGER | read-only | mandatory |
| ospfVirtNbrState OBJECT-TYPE The state of the Virtual Neighbor Relationship. | 1.3.6.1.2.1.14.11.1.5 | INTEGER {down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full(8)} | read-only | mandatory |
| ospfVirtNbrEvents OBJECT-TYPE The number of times this virtual link has changed its state, or an error has occurred. | 1.3.6.1.2.1.14.11.1.6 | Counter | read-only | mandatory |
| ospfVirtNbrLSRetransQLen OBJECT-TYPE The current length of the retransmission queue. | 1.3.6.1.2.1.14.11.1.7 | Gauge | read-only | mandatory |