REPEATER-REV4-MIB
- Registered at
- 1.3.6.1.4.1.52.4.1.1.1.4
- Namespace
- enterasys
- Source file
REPEATER-REV4-MIB- Digest
sha256:e86abaf4cffa6e9893e1a10ed9a3e13dea289242e40cfcb12656878966715709
Imports
| From | Symbols |
|---|---|
| CTRON-MIB-NAMES | repeaterRev4 |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CTRON-MIB-NAMES CTRON-OIDS REPEATER-REV4-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| repeaterrev4 OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4 | |||
| rptr OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.1 | |||
| rptrMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.1.1 | |||
| rptrMgmtName OBJECT-TYPE The ASCII name assigned to this network. | 1.3.6.1.4.1.52.4.1.1.1.4.1.1.1 | DisplayString (SIZE(20)) | read-write | mandatory |
| rptrMgmtPortCount OBJECT-TYPE Total number of ports residing on this lan segment. | 1.3.6.1.4.1.52.4.1.1.1.4.1.1.2 | INTEGER | read-only | mandatory |
| rptrMgmtPortsEnable OBJECT-TYPE Setting this object to Enable will cause all the ports residing in this network segment to be enabled. Setting this object to noEnable will have no effect. When read this object will always return noEnable. | 1.3.6.1.4.1.52.4.1.1.1.4.1.1.3 | INTEGER {noEnable(1), enable(2)} | read-write | mandatory |
| rptrMgmtPortsOn OBJECT-TYPE Get the total number of ON ports in this network. | 1.3.6.1.4.1.52.4.1.1.1.4.1.1.4 | INTEGER | read-only | mandatory |
| rptrMgmtPortsOper OBJECT-TYPE Get the number of operational ports in this network. | 1.3.6.1.4.1.52.4.1.1.1.4.1.1.5 | INTEGER | read-only | mandatory |
| rptrMgmtBoardMap OBJECT-TYPE Get a map of the chassis slots occupied by the boards in this network. | 1.3.6.1.4.1.52.4.1.1.1.4.1.1.6 | INTEGER | read-only | mandatory |
| rptrMgmtInterfaceNum OBJECT-TYPE Get the MIBII interface number of this network. A return of zero will mean this network is not associated with a MIBII interface. | 1.3.6.1.4.1.52.4.1.1.1.4.1.1.7 | INTEGER | read-only | mandatory |
| rptrMgmtResetCounters OBJECT-TYPE Setting this OID to 2 will reset the 'rptrPktStats', 'rptrProtocols' and 'rptrFrameSizes' RREV-4 branch static counters. Reading this OID will always return a 1. | 1.3.6.1.4.1.52.4.1.1.1.4.1.1.8 | INTEGER {normal(1), reseStaticCounters(2)} | read-write | mandatory |
| rptrStats OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.1.2 | |||
| rptrPktStats OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1 | |||
| rptrPktStatsPackets OBJECT-TYPE Get this repeater's total received packets. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.1 | Counter | read-only | mandatory |
| rptrPktStatsBytes OBJECT-TYPE Get this repeater's total received bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.2 | Counter | read-only | mandatory |
| rptrPktStatsColls OBJECT-TYPE Get this repeater's total collisions. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.3 | Counter | read-only | mandatory |
| rptrPktStatsErrors OBJECT-TYPE Get this repeater's total errors. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.4 | Counter | read-only | mandatory |
| rptrPktStatsAlign OBJECT-TYPE Get this repeater's total frame alignment errors. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.5 | Counter | read-only | mandatory |
| rptrPktStatsCRC OBJECT-TYPE Get this repeater's total CRC errors. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.6 | Counter | read-only | mandatory |
| rptrPktStatsOOW OBJECT-TYPE Get this repeater's total out-of-window collisions. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.7 | Counter | read-only | mandatory |
| rptrPktStatsNoRsc OBJECT-TYPE This counter is the number of packets on this network that the hardware has processed that the management has either not seen yet, in the case of an active network, or has missed missed all together, in the case of a once active network. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.8 | Counter | read-only | mandatory |
| rptrPktStatsBroadcasts OBJECT-TYPE This counter is the number of broadcast packets on this network that the hardware has processed. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.9 | Counter | read-only | mandatory |
| rptrPktStatsMulticasts OBJECT-TYPE This counter is the number of multicast packets on this network that the hardware has processed. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.10 | Counter | read-only | mandatory |
| rptrProtocols OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2 | |||
| rptrProtocolsOSI OBJECT-TYPE Get this repeater's total received OSI packets. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.1 | Counter | read-only | mandatory |
| rptrProtocolsNovell OBJECT-TYPE Get this repeater's total received Novell packets. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.2 | Counter | read-only | mandatory |
| rptrProtocolsBanyan OBJECT-TYPE Get this repeater's total received Banyan packets. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.3 | Counter | read-only | mandatory |
| rptrProtocolsDECNet OBJECT-TYPE Get this repeater's total received DECNet packets. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.4 | Counter | read-only | mandatory |
| rptrProtocolsXNS OBJECT-TYPE Get this repeater's total received XNS packets. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.5 | Counter | read-only | mandatory |
| rptrProtocolsIP OBJECT-TYPE Get this repeater's total received TCP/IP packets. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.6 | Counter | read-only | mandatory |
| rptrProtocolsCtron OBJECT-TYPE Get this repeater's total received CTRON Management packets. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.7 | Counter | read-only | mandatory |
| rptrProtocolsAppletalk OBJECT-TYPE Get this repeater's total received Appletalk packets. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.8 | Counter | read-only | mandatory |
| rptrProtocolsOther OBJECT-TYPE Get this repeater's total received unknown protocol packets. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.9 | Counter | read-only | mandatory |
| rptrFrameSizes OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3 | |||
| rptrFrameSzRunt OBJECT-TYPE Get this repeater's total received packets of size less than 64 bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.1 | Counter | read-only | mandatory |
| rptrFrameSz64To127 OBJECT-TYPE Get this repeater's total received packets of size between 64 and 127 bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.2 | Counter | read-only | mandatory |
| rptrFrameSz128To255 OBJECT-TYPE Get this repeater's total received packets of size between 128 and 255 bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.3 | Counter | read-only | mandatory |
| rptrFrameSz256To511 OBJECT-TYPE Get this repeater's total received packets of size between 256 and 511 bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.4 | Counter | read-only | mandatory |
| rptrFrameSz512To1023 OBJECT-TYPE Get this repeater's total received packets of size between 512 and 1023 bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.5 | Counter | read-only | mandatory |
| rptrFrameSz1024To1518 OBJECT-TYPE Get this repeater's total received packets of size between 1024 and 1518 bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.6 | Counter | read-only | mandatory |
| rptrFrameSzGiant OBJECT-TYPE Get this repeater's total received packets of size greater than 1518 bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.7 | Counter | read-only | mandatory |
| rptrAlarms OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.1.3 | |||
| rptrAlarmsTrafEnable OBJECT-TYPE Get returns whether traffic alarms are enabled/disabled. Set allows for enabling/disabling of traffic alarms. | 1.3.6.1.4.1.52.4.1.1.1.4.1.3.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrAlarmsTrafThreshold OBJECT-TYPE The maximum number of packets that will be allowed before an alarm is generated. | 1.3.6.1.4.1.52.4.1.1.1.4.1.3.2 | INTEGER | read-write | mandatory |
| rptrAlarmsCollEnable OBJECT-TYPE Get returns whether collision alarms are enabled/disabled. Set allows for enabling/disabling of collision alarms. | 1.3.6.1.4.1.52.4.1.1.1.4.1.3.3 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrAlarmsCollThreshold OBJECT-TYPE The collision threshold is the maximum number of collisions within the time base that will be allowed before an alarm is generated. | 1.3.6.1.4.1.52.4.1.1.1.4.1.3.4 | INTEGER (1..15) | read-write | mandatory |
| rptrAlarmsErrEnable OBJECT-TYPE Get returns whether error alarms are enabled/disabled. Set allows for enabling/disabling of error alarms. | 1.3.6.1.4.1.52.4.1.1.1.4.1.3.5 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrAlarmsErrThreshold OBJECT-TYPE The percentage of errors per good packet within the timebase that will cause an alarm. The units of this value is in seconds. | 1.3.6.1.4.1.52.4.1.1.1.4.1.3.6 | INTEGER (1..100) | read-write | mandatory |
| rptrAlarmsErrSource OBJECT-TYPE Get/Set a bit encoded map of which errors to include in the error sum, as follows: CRC_errors - Bit 0 - Least Significant Bit runts - Bit 1 OOW_colls - Bit 2 align_errs - Bit 3 undefined - Bit 4 Giants - Bit 5 | 1.3.6.1.4.1.52.4.1.1.1.4.1.3.7 | INTEGER | read-write | mandatory |
| rptrAlarmsAlarmTimebase OBJECT-TYPE The alarm timebase, in seconds. | 1.3.6.1.4.1.52.4.1.1.1.4.1.3.8 | INTEGER (10..999999) | read-write | mandatory |
| rptrAlarmsBroadEnable OBJECT-TYPE Get returns whether broadcast alarms are enabled/disabled. Set allows for enabling/disabling of broadcast alarms. | 1.3.6.1.4.1.52.4.1.1.1.4.1.3.9 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrAlarmsBroadThreshold OBJECT-TYPE The broadcase threshold represents the maximum number of broadcasts that are allowed during the time base before an alarm is generated. | 1.3.6.1.4.1.52.4.1.1.1.4.1.3.10 | INTEGER | read-write | mandatory |
| rptrRedundancy OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.1.4 | |||
| rptrRedund OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1 | |||
| rptrRedundReset OBJECT-TYPE If this object is set to Reset it will cause a reset of the redundancy object to occur. Setting this object to NoReset will do nothing. This object will always be read as NoReset. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.1 | INTEGER {noReset(1), reset(2)} | read-write | mandatory |
| rptrRedundPollInterval OBJECT-TYPE Get/Set the number of seconds between polls for redundancy. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.2 | INTEGER | read-write | mandatory |
| rptrRedundTestTOD OBJECT-TYPE Get/Set the time of day at which the redundant circuits will be tested. The format of the time string is hh:mm:ss. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.3 | DisplayString (SIZE(8)) | read-write | mandatory |
| rptrRedundPerformTest OBJECT-TYPE If this object is set to Test it will cause a test of the redundant circuits to be performed. Setting this object to NoTest will have no effect. When read this object will always return NoTest. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.4 | INTEGER {noTest(1), test(2)} | read-write | mandatory |
| rptrRedundMaxCrcts OBJECT-TYPE Returns the maximum number of circuits which may exist on this network. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.5 | INTEGER | read-only | mandatory |
| rptrRedundCrctTable OBJECT-TYPE A list of redundant circuit objects for this repeater. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2 | not-accessible | mandatory | |
| rptrRedundCrctEntry OBJECT-TYPE A list of objects for a particular redundant circuit. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1 | not-accessible | mandatory | |
| rptrRedundCrctId OBJECT-TYPE Returns the index for a member circuit in the table of redundant circuits. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.1 | INTEGER | read-only | mandatory |
| rptrRedundCrctName OBJECT-TYPE Get/Set the name of the indicated circuit. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.2 | OCTET STRING | read-write | mandatory |
| rptrRedundCrctRetrys OBJECT-TYPE Get/Set the the number of unanswered polls allowed for the circuit. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.3 | INTEGER | read-write | mandatory |
| rptrRedundCrctNumBPs OBJECT-TYPE Get the number of board/port combinations associated with the circuit. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.4 | INTEGER | read-only | mandatory |
| rptrRedundCrctNumAddr OBJECT-TYPE Get the number of IP Addresses associated with the circuit. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.5 | INTEGER | read-only | mandatory |
| rptrRedundCrctAddAddr OBJECT-TYPE Add an IP Address to the polling list for the indicated circuit. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.6 | IpAddress | read-write | mandatory |
| rptrRedundCrctDelAddr OBJECT-TYPE Delete an IP Address from the polling list of the indicated circuit. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.7 | IpAddress | read-write | mandatory |
| rptrRedundCrctEnable OBJECT-TYPE If this object is set to Enable, the circuit is enabled. If this object is set to Disable, the circuit is disbabled. When read, this object returns the state of the object based on the last request made. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.8 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrRedundCrctReset OBJECT-TYPE If this object is set to Reset, the circuit is reset. All of the circuit's associated boards and ports are returned to NOT_USED, any associated IP Addresses are purged from the circuit's address list, the name is cleared, and the retry count is reset to a default value. Setting this object to NoReset has no effect. When read, NoReset is always returned. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.9 | INTEGER {noReset(1), reset(2)} | read-write | mandatory |
| rptrRedundPortTable OBJECT-TYPE A list of redundant port objects for this repeater. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3 | not-accessible | mandatory | |
| rptrRedundPortEntry OBJECT-TYPE A redundant port entry containing objects pertaining to a particular redundant port. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1 | not-accessible | mandatory | |
| rptrRedundPortId OBJECT-TYPE A unique value identifying an element in a sequence of member ports which belong to a circuit in the table of redundant circuits. This value is not a port number; rather it is a value which goes from 1 to the maximum number of ports which may be included in a redundant circuit. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.1 | INTEGER | read-only | mandatory |
| rptrRedundPortCrctId OBJECT-TYPE A unique value identifying a member circuit in the table of redundant circuits. This value is similar to rptrRedundCrctId. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.2 | INTEGER | read-only | mandatory |
| rptrRedundPortNum OBJECT-TYPE Returns the port number of a member port belonging to a redundant circuit. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.3 | INTEGER | read-only | mandatory |
| rptrRedundPortBoardNum OBJECT-TYPE Returns the board number of a member port belonging to a redundant circuit. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.4 | INTEGER | read-only | mandatory |
| rptrRedundPortType OBJECT-TYPE Return the state of a port associated with the indicated circuit. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.5 | INTEGER {notUsed(1), primary(2), backup(3)} | read-only | mandatory |
| rptrRedundAddrTable OBJECT-TYPE A list of redundant IP Address objects which belong to a circuit for this repeater. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.4 | not-accessible | mandatory | |
| rptrRedundAddrEntry OBJECT-TYPE A entry containing objects pertaining to a particular redundant IP Address which belongs to a circuit. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1 | not-accessible | mandatory | |
| rptrRedundAddrId OBJECT-TYPE A unique value identifying an element in a sequence of member IP Addresses which belong to a circuit in the table of redundant circuits. This value goes from 1 to the maximum number of IP Addresses which may be included in a redundant circuit. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.1 | INTEGER | read-only | mandatory |
| rptrRedundAddrCrctId OBJECT-TYPE A unique value identifying a member circuit in the table of redundant circuits. This value is similar to rptrRedundCrctId. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.2 | INTEGER | read-only | mandatory |
| rptrRedundAddrIPAddr OBJECT-TYPE Returns an IP Address associated with the indicated circuit. | 1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.3 | IpAddress | read-only | mandatory |
| rptrSourceAddress OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.1.5 | |||
| rptrSrcAddrListTable OBJECT-TYPE This table defines the source address list that is defined at the repeater level. | 1.3.6.1.4.1.52.4.1.1.1.4.1.5.1 | not-accessible | mandatory | |
| rptrSrcAddrListEntry OBJECT-TYPE Defines a specific source address object. | 1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1 | not-accessible | mandatory | |
| rptrSrcAddrListId OBJECT-TYPE Returns an index into a table of source address seen by this repeater. | 1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1.1 | INTEGER | read-only | mandatory |
| rptrSrcAddrAddressList OBJECT-TYPE Returns a source address seen by this repeater. | 1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1.2 | OCTET STRING (SIZE(6)) | read-only | mandatory |
| rptrSrcAddrSrcTable OBJECT-TYPE This table defines the list of all source addresses that have been seen. | 1.3.6.1.4.1.52.4.1.1.1.4.1.5.2 | not-accessible | mandatory | |
| rptrSrcAddrSrcTableEntry OBJECT-TYPE Describes a particular source address source entry. | 1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1 | not-accessible | mandatory | |
| rptrSrcAddrSrcTableEntryId OBJECT-TYPE Returns the source address to which this table's information pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.1 | OCTET STRING (SIZE(6)) | read-only | mandatory |
| rptrSrcAddrSrcTableEntryPort OBJECT-TYPE Returns the port# of the port that sourced the source address. | 1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.2 | INTEGER | read-only | mandatory |
| rptrSrcAddrSrcTableEntryPortGroup OBJECT-TYPE Returns the port group# of the port that sourced the source address. | 1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.3 | INTEGER | read-only | mandatory |
| rptrSrcAddrMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.1.5.3 | |||
| rptrSrcAddrMgmtSrcAgeInterval OBJECT-TYPE Get/Set source addressing ageing interval. | 1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.1 | INTEGER | read-write | mandatory |
| rptrSrcAddrMgmtPortLock OBJECT-TYPE Setting this object to Lock will activate the network port security lock. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value. | 1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.2 | INTEGER {unlock(1), lock(2), portMisMatch(3)} | read-write | mandatory |
| rptrSrcAddrMgmtActiveUsers OBJECT-TYPE Get the number of active users on this network. | 1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.3 | INTEGER | read-only | mandatory |
| rptrSrcAddrMgmtHashType OBJECT-TYPE Defines the type of hashing that will be used for source address management. In a DEC-NET environment or a combination fo DEC-NET and non DEC-NET users where source address hash access is a concern a value of decHash(2) may yield better results. For non DEC-NET users a value of noDecHash(1) is preferred. | 1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.4 | INTEGER {noDecHash(1), decHash(2)} | read-write | mandatory |
| rptrTrap OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.1.6 | |||
| rptrHwTrapSet OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.1.6.1 | |||
| rptrHwTrapSetLink OBJECT-TYPE Enables and disables link traps for this network. Setting a value of disable(1) is equivalent to setting all instances of rptrPortHwTrapSetLink to a value of disable(1). Setting a value of enable(2) is equivalent to setting all instances of rptrPortHwTrapSetLink to a value of disable(2). Setting a value of other(3) is not allowed. This object will read with the value of disable(1) if all instances of rptrPortHwTrapSetLink for this network are currently set to a value of disable(1). This object will read with the value of enable(2) if all instances of rptrPortHwTrapSetLink for this network are currently set to a value of enable(2). This object will read with the value of other(3) if all instances of rptrPortHwTrapSetLink for this network are not currently set to a value the same value. | 1.3.6.1.4.1.52.4.1.1.1.4.1.6.1.1 | INTEGER {disable(1), enable(2), other(3)} | read-write | mandatory |
| rptrHwTrapSetSeg OBJECT-TYPE Enables and disables segmentation traps for this network. Setting a value of disable(1) is equivalent to setting all instances of rptrPortHwTrapSetSeg to a value of disable(1). Setting a value of enable(2) is equivalent to setting all instances of rptrPortHwTrapSetSeg to a value of disable(2). Setting a value of other(3) is not allowed. This object will read with the value of disable(1) if all instances of rptrPortHwTrapSetSeg for this network are currently set to a value of disable(1). This object will read with the value of enable(2) if all instances of rptrPortHwTrapSetSeg for this network are currently set to a value of enable(2). This object will read with the value of other(3) if all instances of rptrPortHwTrapSetSeg for this network are not currently set to a value the same value. | 1.3.6.1.4.1.52.4.1.1.1.4.1.6.1.2 | INTEGER {disable(1), enable(2), other(3)} | read-write | mandatory |
| rptrSaTrapSet OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.1.6.2 | |||
| rptrSaTrapSetSrcaddr OBJECT-TYPE Enables and disables source address traps for this network. Setting a value of disable(1) is equivalent to setting all instances of rptrPortSaTrapSetSrcaddr to a value of disable(1). Setting a value of enable(2) is equivalent to setting all instances of rptrPortSaTrapSetSrcaddr to a value of disable(2). Setting a value of other(3) is not allowed. This object will read with the value of disable(1) if all instances of rptrPortSaTrapSetSrcaddr for this network are currently set to a value of disable(1). This object will read with the value of enable(2) if all instances of rptrPortSaTrapSetSrcaddr for this network are currently set to a value of enable(2). This object will read with the value of other(3) if all instances of rptrPortSaTrapSetSrcaddr for this network are not currently set to a value the same value. | 1.3.6.1.4.1.52.4.1.1.1.4.1.6.2.1 | INTEGER {disable(1), enable(2), other(3)} | read-write | mandatory |
| rptrSaSecurity OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.1.7 | |||
| rptrSecurityLockState OBJECT-TYPE Setting this object to Lock will activate the network port security lock. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value. | 1.3.6.1.4.1.52.4.1.1.1.4.1.7.1 | INTEGER {unlock(1), lock(2), portMisMatch(3)} | read-write | mandatory |
| rptrSecuritySecureState OBJECT-TYPE The status of source address security of the network. Ports on the network that are secure(1), can be locked in order to enable security. nonSecure(2) ports cannot be locked. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value. | 1.3.6.1.4.1.52.4.1.1.1.4.1.7.2 | INTEGER {secure(1), nonSecure(2), portMisMatch(3)} | read-only | mandatory |
| rptrSecurityLearnState OBJECT-TYPE The learn state of the network. This object will only be applied to ports that are unlocked. If set to learn(1), all addresses are deleted on the ports and learning begins once again. If it is set to noLearn(2), learning stops on the port. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value. | 1.3.6.1.4.1.52.4.1.1.1.4.1.7.3 | INTEGER {learn(1), noLearn(2), portMisMatch(3)} | read-write | mandatory |
| rptrSecurityLearnMode OBJECT-TYPE Get/Set the learn mode of the network. If set to onetime learn mode oneTime(1), each port is capable of learning two addresses and securing on both destination and source addresses once they are locked. If set to continuous learn continuous(2), all addresses are initially deleted and each port continuously replaces the existing secure source address with the latest source address it sees. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value. | 1.3.6.1.4.1.52.4.1.1.1.4.1.7.4 | INTEGER {oneTime(1), continuous(2), portMisMatch(3)} | read-write | mandatory |
| rptrPortGroup OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.2 | |||
| rptrPortGrpMgmtTable OBJECT-TYPE A list of port management objects for this repeater node. | 1.3.6.1.4.1.52.4.1.1.1.4.2.1 | not-accessible | mandatory | |
| rptrPortGrpMgmtEntry OBJECT-TYPE An entry containing objects pertaining to port management for a port group. | 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1 | not-accessible | mandatory | |
| rptrPortGrpMgmtGrpId OBJECT-TYPE Returns an index to a port group for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.1 | INTEGER | read-only | mandatory |
| rptrPortGrpMgmtName OBJECT-TYPE Gets/Sets a name for the specified port group. | 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.2 | DisplayString (SIZE(20)) | read-write | mandatory |
| rptrPortGrpMgmtPortCount OBJECT-TYPE Get total number of ports contained on the board. Notice that this is the physical port count. | 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.3 | INTEGER | read-only | mandatory |
| rptrPortGrpMgmtPortsEnable OBJECT-TYPE Setting this object to Enable will cause all the ports residing in this network segment to be enabled. Setting this object to noEnable will have no effect. When read this object will always return noEnable. | 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.4 | INTEGER {noEnable(1), enable(2)} | read-write | mandatory |
| rptrPortGrpMgmtPortsOn OBJECT-TYPE Get total number of ON ports in this port group. | 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.5 | INTEGER | read-only | mandatory |
| rptrPortGrpMgmtPortsOper OBJECT-TYPE Get total number of operational ports in the port group. | 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.6 | INTEGER | read-only | mandatory |
| rptrPortGrpMgmtLogPortCount OBJECT-TYPE Get total number of ports contained in this port group. | 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.7 | INTEGER | read-only | mandatory |
| rptrPortGrpStats OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.2.2 | |||
| rptrPortGrpPktStatsTbl OBJECT-TYPE This table provides packet statistics for port group. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1 | not-accessible | mandatory | |
| rptrPortGrpPktStatsEntry OBJECT-TYPE Defines a specific packet statistics entry. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1 | not-accessible | mandatory | |
| rptrPortGrpPktStatsId OBJECT-TYPE Returns an index to a port group for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.1 | INTEGER | read-only | mandatory |
| rptrPortGrpPktStatsPkts OBJECT-TYPE Return this port group's total received packets. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.2 | Counter | read-only | mandatory |
| rptrPortGrpPktStatsBytes OBJECT-TYPE Return this port group's total received bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.3 | Counter | read-only | mandatory |
| rptrPortGrpPktStatsColls OBJECT-TYPE Return this port group's total collisions. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.4 | Counter | read-only | mandatory |
| rptrPortGrpPktStatsErrors OBJECT-TYPE Return this port group's total errors. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.5 | Counter | read-only | mandatory |
| rptrPortGrpPktStatsAlign OBJECT-TYPE Return this port group's total frame alignment errors. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.6 | Counter | read-only | mandatory |
| rptrPortGrpPktStatsCRC OBJECT-TYPE Return this port group's total CRC errors. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.7 | Counter | read-only | mandatory |
| rptrPortGrpPktStatsOOW OBJECT-TYPE Return this port group's total out-of-window collisions. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.8 | Counter | read-only | mandatory |
| rptrPortGrpPktStatsBroadcasts OBJECT-TYPE Return this port group's total received broadcast packets. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.9 | Counter | read-only | mandatory |
| rptrPortGrpPktStatsMulticasts OBJECT-TYPE Return this port group's total received multicast packets. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.10 | Counter | read-only | mandatory |
| rptrPortGrpProtocolTbl OBJECT-TYPE Provides port group protocol statistics. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2 | not-accessible | mandatory | |
| rptrPortGrpProtocolEntry OBJECT-TYPE Defines a specific port group protocol statistics entry. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1 | not-accessible | mandatory | |
| rptrPortGrpProtocolId OBJECT-TYPE Returns an index to a port group for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.1 | INTEGER | read-only | mandatory |
| rptrPortGrpProtocolOSI OBJECT-TYPE Return this port group's total received OSI packets. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.2 | Counter | read-only | mandatory |
| rptrPortGrpProtocolNovell OBJECT-TYPE Return this port group's total received Novell packets. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.3 | Counter | read-only | mandatory |
| rptrPortGrpProtocolBanyan OBJECT-TYPE Return this port group's total received Banyan packets. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.4 | Counter | read-only | mandatory |
| rptrPortGrpProtocolDECNet OBJECT-TYPE Return this port group's total received DECNet packets. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.5 | Counter | read-only | mandatory |
| rptrPortGrpProtocolXNS OBJECT-TYPE Return this port group's total received XNS packets. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.6 | Counter | read-only | mandatory |
| rptrPortGrpProtocolIP OBJECT-TYPE Return this port group's total received TCP/IP packets. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.7 | Counter | read-only | mandatory |
| rptrPortGrpProtocolCtron OBJECT-TYPE Return this port group's total received CTRON Management packets. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.8 | Counter | read-only | mandatory |
| rptrPortGrpProtocolAppletalk OBJECT-TYPE Return this port group's total received Appletalk packets. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.9 | Counter | read-only | mandatory |
| rptrPortGrpProtocolOther OBJECT-TYPE Return this port group's total received unknown protocol packets. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.10 | Counter | read-only | mandatory |
| rptrPortGrpFrameSzTbl OBJECT-TYPE Defines frame sizes as seen by this port group. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3 | not-accessible | mandatory | |
| rptrPortGrpFrameSzEntry OBJECT-TYPE Defines a particular frame size entry. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1 | not-accessible | mandatory | |
| rptrPortGrpFrameSzId OBJECT-TYPE Returns an index to a port group for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.1 | INTEGER | read-only | mandatory |
| rptrPortGrpFrameSzRunt OBJECT-TYPE Return this port group's total received packets of size less than 64 bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.2 | Counter | read-only | mandatory |
| rptrPortGrpFrameSz64To127 OBJECT-TYPE Return this port group's total received packets of size between 64 and 127 bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.3 | Counter | read-only | mandatory |
| rptrPortGrpFrameSz128To255 OBJECT-TYPE Return this port group's total received packets of size between 128 and 255 bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.4 | Counter | read-only | mandatory |
| rptrPortGrpFrameSz256To511 OBJECT-TYPE Return this port group's total received packets of size between 256 and 511 bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.5 | Counter | read-only | mandatory |
| rptrPortGrpFrameSz512To1023 OBJECT-TYPE Return this port group's total received packets of size between 512 and 1023 bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.6 | Counter | read-only | mandatory |
| rptrPortGrpFrameSz1024To1518 OBJECT-TYPE Return this port group's total received packets of size between 1024 and 1518 bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.7 | Counter | read-only | mandatory |
| rptrPortGrpFrameSzGiant OBJECT-TYPE Return this port group's total received packets of size greater than 1518 bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.8 | Counter | read-only | mandatory |
| rptrPortGrpAlarmTable OBJECT-TYPE A list of port group alarm objects for this repeater node. | 1.3.6.1.4.1.52.4.1.1.1.4.2.3 | not-accessible | mandatory | |
| rptrPortGrpAlarmEntry OBJECT-TYPE An entry containing objects pertaining to port group alarms for a port group. | 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1 | not-accessible | mandatory | |
| rptrPortGrpAlarmId OBJECT-TYPE Returns an index to a port group for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.1 | INTEGER | read-only | mandatory |
| rptrPortGrpAlarmTrafEnable OBJECT-TYPE Get returns whether traffic alarms are enabled/disabled. Set allows for enabling/disabling of traffic alarms. | 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.2 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrPortGrpAlarmTrafThreshold OBJECT-TYPE The maximum number of packets that will be allowed before an alarm is generated. | 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.3 | INTEGER | read-write | mandatory |
| rptrPortGrpAlarmTrafGrpDisable OBJECT-TYPE Set will permit a port group to be disabled on a traffic alarm condition. Get will show whether the port group disabling is allowed or not. | 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.4 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrPortGrpAlarmCollEnable OBJECT-TYPE Get returns whether collision alarms are enabled/disabled. Set allows for enabling/disabling of collision alarms. | 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.5 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrPortGrpAlarmCollThreshold OBJECT-TYPE The collision threshold is the maximum number of collisions within the time base that will be allowed before an alaram is generated. | 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.6 | INTEGER (1..999999) | read-write | mandatory |
| rptrPortGrpAlarmCollBdDisable OBJECT-TYPE Set will permit a port group to be disabled on a collision alarm condition. Get will show whether the port group disabling is allowed or not. | 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.7 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrPortGrpAlarmErrEnable OBJECT-TYPE Get returns whether error alarms are enabled/disabled. Set allows for enabling/disabling of error alarms. | 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.8 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrPortGrpAlarmErrThreshold OBJECT-TYPE Get/Set the percentage of errors per good packet within the timebase that will cause an alarm. | 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.9 | INTEGER (1..100) | read-write | mandatory |
| rptrPortGrpAlarmErrSource OBJECT-TYPE Get/Set a bit encoded map of which errors to include in the error sum, as follows: CRC_errors - Bit 0 - Least Significant Bit runts - Bit 1 OOW_colls - Bit 2 align_errs - Bit 3 undefined - Bit 4 Giants - Bit 5 | 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.10 | INTEGER | read-write | mandatory |
| rptrPortGrpAlarmErrGrpDisable OBJECT-TYPE Set will permit a port group to be disabled on an error alarm condition. Get will show whether the port group disabling is allowed or not. | 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.11 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrPortGrpAlarmBroadEnable OBJECT-TYPE Get returns whether broadcast alarms are enabled/disabled. Set allows for enabling/disabling of broadcast alarms. | 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.12 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrPortGrpAlarmBroadThreshold OBJECT-TYPE The broadcase threshold represents the maximum number of broadcasts that are allowed during the time base before an alarm is generated. | 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.13 | INTEGER | read-write | mandatory |
| rptrPortGrpAlarmBroadGrpDisable OBJECT-TYPE Set will permit a port group to be disabled on a broadcast alarm condition. Get will show whether the port group disabling is allowed or not. | 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.14 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrPortGrpSrcAddrTable OBJECT-TYPE This table provides a list of the number of active users that have been seen by port group. | 1.3.6.1.4.1.52.4.1.1.1.4.2.4 | not-accessible | mandatory | |
| rptrPortGrpSrcAddrEntry OBJECT-TYPE Defines a specific active user entry. | 1.3.6.1.4.1.52.4.1.1.1.4.2.4.1 | not-accessible | mandatory | |
| rptrPortGrpSrcAddrId OBJECT-TYPE Returns an index to a port group for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.2.4.1.1 | INTEGER | read-only | mandatory |
| rptrPortGrpSrcAddrActiveUsers OBJECT-TYPE Returns the total number of active users seen by this port group. | 1.3.6.1.4.1.52.4.1.1.1.4.2.4.1.2 | INTEGER | read-only | mandatory |
| rptrPortGrpTrap OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.2.5 | |||
| rptrPortGrpHwTrapSet OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1 | |||
| rptrPortGrpHwTrapTable OBJECT-TYPE A list of trap enable/disable at the port group level. Disable here is equivalent to disable for each port in the port group. | 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1 | not-accessible | mandatory | |
| rptrPortGrpHwTrapEntry OBJECT-TYPE Individual trap entries for port group enable/disable. | 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1 | not-accessible | mandatory | |
| rptrPortGrpHwTrapSetGrpId OBJECT-TYPE Returns an index to a port group for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1.1 | INTEGER | read-only | mandatory |
| rptrPortGrpHwTrapSetLink OBJECT-TYPE Enables and disables link traps for the specified port group. Setting a value of disable(1) is equivalent to setting all instances of rptrPortHwTrapSetLink to a value of disable(1). Setting a value of enable(2) is equivalent to setting all instances of rptrPortHwTrapSetLink to a value of disable(2). Setting a value of other(3) is not allowed. This object will read with the value of disable(1) if all instances of rptrPortHwTrapSetLink for this port group are currently set to a value of disable(1). This object will read with the value of enable(2) if all instances of rptrPortHwTrapSetLink for this port group are currently set to a value of enable(2). This object will read with the value of other(3) if all instances of rptrPortHwTrapSetLink for this port group are not currently set to a value the same value. | 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1.2 | INTEGER {disable(1), enable(2), other(3)} | read-write | mandatory |
| rptrPortGrpHwTrapSetSeg OBJECT-TYPE Enables and disables segmentation traps for the specified port group. Setting a value of disable(1) is equivalent to setting all instances of rptrPortHwTrapSetSeg to a value of disable(1). Setting a value of enable(2) is equivalent to setting all instances of rptrPortHwTrapSetSeg to a value of disable(2). Setting a value of other(3) is not allowed. This object will read with the value of disable(1) if all instances of rptrPortHwTrapSetSeg for this port group are currently set to a value of disable(1). This object will read with the value of enable(2) if all instances of rptrPortHwTrapSetSeg for this port group are currently set to a value of enable(2). This object will read with the value of other(3) if all instances of rptrPortHwTrapSetSeg for this port group are not currently set to a value the same value. | 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1.3 | INTEGER {disable(1), enable(2), other(3)} | read-write | mandatory |
| rptrPortGrpSaTrapSet OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.2.5.2 | |||
| rptrPortGrpSaTrapTable OBJECT-TYPE A list of trap enable/disable at the port group level. Disable here is equivalent to disable for each port in the port group. | 1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1 | not-accessible | mandatory | |
| rptrPortGrpSaTrapEntry OBJECT-TYPE Individual trap entries for port group enable/disable. | 1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1.1 | not-accessible | mandatory | |
| rptrPortGrpSaTrapSetGrpId OBJECT-TYPE Returns an index to a port group for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1.1.1 | INTEGER | read-only | mandatory |
| rptrPortGrpSaTrapSetSrcaddr OBJECT-TYPE Enables and disables source address traps for the specified port group. Setting a value of disable(1) is equivalent to setting all instances of rtprPortSaTrapSetSrcaddr to a value of disable(1). Setting a value of enable(2) is equivalent to setting all instances of rtprPortSaTrapSetSrcaddr to a value of disable(2). Setting a value of other(3) is not allowed. This object will read with the value of disable(1) if all instances of rptrPortSaTrapSetSrcaddr for this port group are currently set to a value of disable(1). This object will read with the value of enable(2) if all instances of rptrPortSaTrapSetSrcaddr for this port group are currently set to a value of enable(2). This object will read with the value of other(3) if all instances of rptrPortSaTrapSetSrcaddr for this port group are not currently set to a value the same value. | 1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1.1.2 | INTEGER {disable(1), enable(2), other(3)} | read-write | mandatory |
| rptrPortGrpSrcAddrLockTable OBJECT-TYPE This table defines the status of the port group source address security locks. | 1.3.6.1.4.1.52.4.1.1.1.4.2.6 | not-accessible | mandatory | |
| rptrPortGrpSrcAddrLockEntry OBJECT-TYPE DeDefines a status of a particular port group security lock. | 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1 | not-accessible | mandatory | |
| rptrPortGrpSrcAddrLockGrpId OBJECT-TYPE Defines a particular port group for which this source address security lock information pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.1 | INTEGER | read-only | mandatory |
| rptrPortGrpSrcAddrLock OBJECT-TYPE Allows setting of the security lock status for this port group. unlock(1) - Unlocks the source address lock this group, lock(2) - Locks the source address for this group, Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value. | 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.2 | INTEGER {unlock(1), lock(2), portMisMatch(3)} | read-write | mandatory |
| rptrPortGrpSASecuritySecureState OBJECT-TYPE The state of the source addressing security for this port group. Ports on the port group that are secure(1), can be locked in order to enable security. When a value of nonSecure(2) is returned ports cannot be locked. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value. | 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.3 | INTEGER {secure(1), nonSecure(2), portMisMatch(3)} | read-only | mandatory |
| rptrPortGrpSASecurityLearnState OBJECT-TYPE The learn state of source addressing security for this port group. This object will only be applied to ports that are unlocked. If set to learn(1), all addresses are deleted on the port and learning begins once again. If it is set to noLearn(2), learning stops on the port. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value. | 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.4 | INTEGER {learn(1), noLearn(2), portMisMatch(3)} | read-write | mandatory |
| rptrPortGrpSASecurityLearnMode OBJECT-TYPE The learn mode of source addressing security port group. If set to oneTime(1), each port is capable of learning two addresses and securing on both destination and source addresses once they are locked. If set to continuous(2), all addresses are initially deleted and each port continuously replaces the existing secure source address with latest source address it sees. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects that not all ports are at the same value. | 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.5 | INTEGER {oneTime(1), continuous(2), portMisMatch(3)} | read-write | mandatory |
| rptrPort OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.3 | |||
| rptrPortMgmtTable OBJECT-TYPE A list of port management objects for this repeater node. | 1.3.6.1.4.1.52.4.1.1.1.4.3.1 | not-accessible | mandatory | |
| rptrPortMgmtEntry OBJECT-TYPE An entry containing objects pertaining to port management for a port. | 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1 | not-accessible | mandatory | |
| rptrPortMgmtPortId OBJECT-TYPE Returns an index to a port for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.1 | INTEGER | read-only | mandatory |
| rptrPortMgmtPortGrpId OBJECT-TYPE Returns an index to a port group for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.2 | INTEGER | read-only | mandatory |
| rptrPortMgmtName OBJECT-TYPE Sets/Gets an ASCII name assigned to this port. | 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.3 | DisplayString (SIZE(20)) | read-write | mandatory |
| rptrPortMgmtAdminState OBJECT-TYPE Setting this object to Enable will cause port to be enabled. Setting this object to Disable will cause the port to be disabled. When read this object will return the state of the object per the last request. | 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.4 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrPortMgmtOperState OBJECT-TYPE Get port operational status. | 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.5 | INTEGER {notOperational(1), operational(2)} | read-only | mandatory |
| rptrPortMgmtPortType OBJECT-TYPE Uniquely defines the repeater port type. A authoritative identification for a port type. By convention, this value is allocated within the SMI enterprises subtree (1.3.6.1.4.1), and provides an easy and unambiguous means to determine the type of repeater port. | 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.6 | OBJECT IDENTIFIER | read-only | mandatory |
| rptrPortStats OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.3.2 | |||
| rptrPortPktStatsTbl OBJECT-TYPE Provides repeater port packet statistics. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1 | not-accessible | mandatory | |
| rptrPortPktStatsEntry OBJECT-TYPE Provides basic statistics for a specific port. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1 | not-accessible | mandatory | |
| rptrPortPktStatsPortId OBJECT-TYPE Returns an index to a port for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.1 | INTEGER | read-only | mandatory |
| rptrPortPktStatsPortGrpId OBJECT-TYPE Returns an index to a port group for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.2 | INTEGER | read-only | mandatory |
| rptrPortPktStatsPackets OBJECT-TYPE Get this port's total received packets. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.3 | Counter | read-only | mandatory |
| rptrPortPktStatsBytes OBJECT-TYPE Get this port's total received bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.4 | Counter | read-only | mandatory |
| rptrPortPktStatsColls OBJECT-TYPE Get this port's total collisions. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.5 | Counter | read-only | mandatory |
| rptrPortPktStatsErrors OBJECT-TYPE Get this port's total errors. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.6 | Counter | read-only | mandatory |
| rptrPortPktStatsAlign OBJECT-TYPE Get this port's total frame alignment errors. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.7 | Counter | read-only | mandatory |
| rptrPortPktStatsCRC OBJECT-TYPE Get this port's total CRC errors. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.8 | Counter | read-only | mandatory |
| rptrPortPktStatsOOW OBJECT-TYPE Get this port's total out-of-window collisions. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.9 | Counter | read-only | mandatory |
| rptrPortPktStatsBroadcasts OBJECT-TYPE Get this port's total received broadcast packets. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.10 | Counter | read-only | mandatory |
| rptrPortPktStatsMulticasts OBJECT-TYPE Get this port's total received multicast packets. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.11 | Counter | read-only | mandatory |
| rptrPortProtocolTbl OBJECT-TYPE Provides statistics about the protocols seen by the different ports. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2 | not-accessible | mandatory | |
| rptrPortProtocolEntry OBJECT-TYPE An entry containing objects pertaining to statistics about protocols seen by different ports. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1 | not-accessible | mandatory | |
| rptrPortProtocolPortId OBJECT-TYPE Returns an index to a port for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.1 | INTEGER | read-only | mandatory |
| rptrPortProtocolPortGrpId OBJECT-TYPE Returns an index to a port group for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.2 | INTEGER | read-only | mandatory |
| rptrPortProtocolOSI OBJECT-TYPE Get this port's total received OSI protocol packets. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.3 | Counter | read-only | mandatory |
| rptrPortProtocolNovell OBJECT-TYPE Get this port's total received Novell protocol packets. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.4 | Counter | read-only | mandatory |
| rptrPortProtocolBanyan OBJECT-TYPE Get this port's total received Banyan protocol packets. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.5 | Counter | read-only | mandatory |
| rptrPortProtocolDECNet OBJECT-TYPE Get this port's total received DECNet protocol packets. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.6 | Counter | read-only | mandatory |
| rptrPortProtocolXNS OBJECT-TYPE Get this port's total received XNS protocol packets. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.7 | Counter | read-only | mandatory |
| rptrPortProtocolIP OBJECT-TYPE Get this port's total received TCP/IP protocol packets. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.8 | Counter | read-only | mandatory |
| rptrPortProtocolCtron OBJECT-TYPE Get this port's total received CTRON Management protocol packets. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.9 | Counter | read-only | mandatory |
| rptrPortProtocolAppletalk OBJECT-TYPE Get this port's total received Appletalk protocol packets. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.10 | Counter | read-only | mandatory |
| rptrPortProtocolOther OBJECT-TYPE Get this port's total received unknown protocol packets. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.11 | Counter | read-only | mandatory |
| rptrPortFrameSzTbl OBJECT-TYPE Provides repeater port frame size statistics. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3 | not-accessible | mandatory | |
| rptrPortFrameSzEntry OBJECT-TYPE Describes a set of frame size statistics for a specific port. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1 | not-accessible | mandatory | |
| rptrPortFrameSzPortId OBJECT-TYPE Returns an index to a port for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.1 | INTEGER | read-only | mandatory |
| rptrPortFrameSzPortGrpId OBJECT-TYPE Returns an index to a port group for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.2 | INTEGER | read-only | mandatory |
| rptrPortFrameSzRunt OBJECT-TYPE Get this port's total received packets of size less than 64 bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.3 | Counter | read-only | mandatory |
| rptrPortFrameSz64To127 OBJECT-TYPE Get this port's total received packets of size between 64 and 127 bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.4 | Counter | read-only | mandatory |
| rptrPortFrameSz128To255 OBJECT-TYPE Get this port's total received packets of size between 128 and 255 bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.5 | Counter | read-only | mandatory |
| rptrPortFrameSz256To511 OBJECT-TYPE Get this port's total received packets of size between 256 and 511 bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.6 | Counter | read-only | mandatory |
| rptrPortFrameSz512To1023 OBJECT-TYPE Get this port's total received packets of size between 512 and 1023 bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.7 | Counter | read-only | mandatory |
| rptrPortFrameSz1024To1518 OBJECT-TYPE Get this port's total received packets of size between 1024 and 1518 bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.8 | Counter | read-only | mandatory |
| rptrPortFrameSzGiant OBJECT-TYPE Get this port's total received packets of size greater than 1518 bytes. | 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.9 | Counter | read-only | mandatory |
| rptrPortAlarmTable OBJECT-TYPE A list of port alarm objects for this repeater node. | 1.3.6.1.4.1.52.4.1.1.1.4.3.3 | not-accessible | mandatory | |
| rptrPortAlarmEntry OBJECT-TYPE An entry containing objects pertaining to port alarm objects for a port group. | 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1 | not-accessible | mandatory | |
| rptrPortAlarmPortId OBJECT-TYPE Returns an index to a port for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.1 | INTEGER | read-only | mandatory |
| rptrPortAlarmPortGrpId OBJECT-TYPE Returns an index to a port group for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.2 | INTEGER | read-only | mandatory |
| rptrPortAlarmTrafEnable OBJECT-TYPE Get returns whether traffic alarms are enabled/disabled. Set allows for enabling/disabling of traffic alarms. | 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.3 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrPortAlarmTrafThreshold OBJECT-TYPE The maximum number of packets that will be allowed before an alarm is generated. | 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.4 | INTEGER | read-write | mandatory |
| rptrPortAlarmTrafPortDisable OBJECT-TYPE Set will permit a port to be disabled on a traffic alarm condition. Get will show whether the port disabling is allowed or not. | 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.5 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrPortAlarmCollEnable OBJECT-TYPE Get returns whether collision alarms are enabled/disabled. Set allows for enabling/disabling of collision alarms. | 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.6 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrPortAlarmCollThreshold OBJECT-TYPE The collision threshold is the maximum number of collisions within the time base that will be allowed before an alaram is generated. | 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.7 | INTEGER (1..999999) | read-write | mandatory |
| rptrPortAlarmCollPortDisable OBJECT-TYPE Set will permit a port to be disabled on a collision alarm condition. Get will show whether the port disabling is allowed or not. | 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.8 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrPortAlarmErrEnable OBJECT-TYPE Get returns whether error alarms are enabled/disabled. Set allows for enabling/disabling of error alarms. | 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.9 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrPortAlarmErrThreshold OBJECT-TYPE Get/Set the percentage of errors per good packet within the timebase that will cause an alarm. | 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.10 | INTEGER (1..100) | read-write | mandatory |
| rptrPortAlarmErrSource OBJECT-TYPE Get/Set a bit encoded map of which errors to include in the error sum, as follows: CRC_errors - Bit 0 - Least Significant Bit runts - Bit 1 OOW_colls - Bit 2 align_errs - Bit 3 undefined - Bit 4 Giants - Bit 5 | 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.11 | INTEGER | read-write | mandatory |
| rptrPortAlarmErrPortDisable OBJECT-TYPE Set will permit a port to be disabled on an error alarm condition. Get will show whether the port disabling is allowed or not. | 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.12 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrPortAlarmBroadEnable OBJECT-TYPE Get returns whether broadcast alarms are enabled/disabled. Set allows for enabling/disabling of broadcast alarms. | 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.13 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrPortAlarmBroadThreshold OBJECT-TYPE The broadcase threshold represents the maximum number of broadcasts that are allowed during the time base before an alarm is generated. | 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.14 | INTEGER | read-write | mandatory |
| rptrPortAlarmBroadPortDisable OBJECT-TYPE Set will permit a port to be disabled on a broadcast alarm condition. Get will show whether the port disabling is allowed or not. | 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.15 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrPortRedundTable OBJECT-TYPE A list of port redundancy objects for this repeater node. | 1.3.6.1.4.1.52.4.1.1.1.4.3.4 | not-accessible | mandatory | |
| rptrPortRedundEntry OBJECT-TYPE An entry containing objects pertaining to port redundancy for a port group. | 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1 | not-accessible | mandatory | |
| rptrPortRedundPortId OBJECT-TYPE Returns an index to a port for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.1 | INTEGER | read-only | mandatory |
| rptrPortRedundPortGrpId OBJECT-TYPE Returns an index to a port group for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.2 | INTEGER | read-only | mandatory |
| rptrPortRedundCrctNum OBJECT-TYPE Get/Set redundant circuit number of redundant circuit that port is or is to be associated with. | 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.3 | INTEGER | read-write | mandatory |
| rptrPortRedundType OBJECT-TYPE Get/Set redundant port type. | 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.4 | INTEGER {notUsed(1), primary(2), backup(3)} | read-write | mandatory |
| rptrPortRedundStatus OBJECT-TYPE Get/Set redundant port status. | 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.5 | INTEGER {notUsed(1), active(2), inactive(3)} | read-write | mandatory |
| rptrPortSrcAddrTable OBJECT-TYPE A list of port source address objects for this repeater node. | 1.3.6.1.4.1.52.4.1.1.1.4.3.5 | not-accessible | mandatory | |
| rptrPortSrcAddrEntry OBJECT-TYPE An entry containing objects pertaining to port source address objects for a port group. | 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1 | not-accessible | mandatory | |
| rptrPortSrcAddrPortId OBJECT-TYPE Returns an index to a port for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.1 | INTEGER | read-only | mandatory |
| rptrPortSrcAddrPortGrpId OBJECT-TYPE Returns an index to a port group for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.2 | INTEGER | read-only | mandatory |
| rptrPortSrcAddrTopoState OBJECT-TYPE Returns the topological state of the port. | 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.3 | INTEGER {station(1), trunk(2)} | read-only | mandatory |
| rptrPortSrcAddrForceTrunk OBJECT-TYPE When this object is set to Force it causes the port to be placed into a Trunk topological state whether the network traffic would warrant such a state or not. When this object is set to NoForce it allows the port to assume the topological state it would naturally assume based on the network activity across it. When read this object reports the current setting. | 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.4 | INTEGER {noForce(1), force(2)} | read-write | mandatory |
| rptrPortSrcAddrActiveUsers OBJECT-TYPE Returns the total number of active users seen by this port. | 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.5 | INTEGER | read-only | mandatory |
| rptrPortSrcAddrListTable OBJECT-TYPE This table provides information about the source addresses that have been seen by the differnt ports. | 1.3.6.1.4.1.52.4.1.1.1.4.3.6 | not-accessible | mandatory | |
| rptrPortSrcAddrListEntry OBJECT-TYPE A specific source address that has been seen | 1.3.6.1.4.1.52.4.1.1.1.4.3.6.1 | not-accessible | mandatory | |
| rptrPortSrcAddrListId OBJECT-TYPE Returns an index associated with the number of address to be returned. | 1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.1 | INTEGER | read-only | mandatory |
| rptrPortSrcAddrListPortId OBJECT-TYPE Returns an index to a port for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.2 | INTEGER | read-only | mandatory |
| rptrPortSrcAddrListPortGrpId OBJECT-TYPE Returns an index to a port group for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.3 | INTEGER | read-only | mandatory |
| rptrPortSrcAddrAddressList OBJECT-TYPE Returns a source address seen on this port. | 1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.4 | OCTET STRING | read-only | mandatory |
| rptrPortHardwareTable OBJECT-TYPE A list of port hardware objects for this repeater port. | 1.3.6.1.4.1.52.4.1.1.1.4.3.7 | not-accessible | mandatory | |
| rptrPortHardwareEntry OBJECT-TYPE An entry containing objects pertaining to port hardware for a hardware port group. | 1.3.6.1.4.1.52.4.1.1.1.4.3.7.1 | not-accessible | mandatory | |
| rptrPortHardwarePortId OBJECT-TYPE Returns an index to a port for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.1 | INTEGER | read-only | mandatory |
| rptrPortHardwarePortGrpId OBJECT-TYPE Returns an index to a port group for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.2 | INTEGER | read-only | mandatory |
| rptrPortHardwareSegStatus OBJECT-TYPE Returns port segmentation status. | 1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.3 | INTEGER {notSegmented(1), segmented(2)} | read-only | mandatory |
| rptrPortHardwareLinkStatus OBJECT-TYPE Returns port link status. | 1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.4 | INTEGER {notLinked(1), linked(2), notApplicable(3)} | read-only | mandatory |
| rptrPortTrap OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.3.8 | |||
| rptrPortHwTrapSet OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1 | |||
| rptrPortHwTrapTable OBJECT-TYPE A list of trap enable/disable at the port level. | 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1 | not-accessible | mandatory | |
| rptrPortHwTrapEntry OBJECT-TYPE Individual trap entries for port group enable/disable. | 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1 | not-accessible | mandatory | |
| rptrPortHwTrapSetPortId OBJECT-TYPE Returns an index to a port for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.1 | INTEGER | read-only | mandatory |
| rptrPortHwTrapSetPortGrpId OBJECT-TYPE Returns an index to a port group for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.2 | INTEGER | read-only | mandatory |
| rptrPortHwTrapSetLink OBJECT-TYPE Enables and disables link traps for this port. | 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.3 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrPortHwTrapSetSeg OBJECT-TYPE Enables and disables segmentation traps for this port. | 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.4 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrPortSaTrapSet OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2 | |||
| rptrPortSaTrapTable OBJECT-TYPE A list of trap enable/disable at the port level | 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1 | not-accessible | mandatory | |
| rptrPortSaTrapEntry OBJECT-TYPE Individual trap entries for port group enable/disable. | 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1 | not-accessible | mandatory | |
| rptrPortSaTrapSetPortId OBJECT-TYPE Returns an index to a port for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.1 | INTEGER | read-only | mandatory |
| rptrPortSaTrapSetPortGrpId OBJECT-TYPE Returns an index to a port group for which the information in this table pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.2 | INTEGER | read-only | mandatory |
| rptrPortSaTrapSetSrcaddr OBJECT-TYPE Enables and disables source address traps for this port. | 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.3 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rptrPortSecurity OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.3.9 | |||
| rptrPortSecurityTable OBJECT-TYPE This table defines status of the source lock security. | 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1 | not-accessible | mandatory | |
| rptrPortSecurityEntry OBJECT-TYPE Defines lock status for this particular entry. | 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1 | not-accessible | mandatory | |
| rptrPortSecurityPortGrpId OBJECT-TYPE The port Group ID for which this source address lock entry pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.1 | INTEGER | read-only | mandatory |
| rptrPortSecurityPortId OBJECT-TYPE The port ID for which this source address lock entry pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.2 | INTEGER | read-only | mandatory |
| rptrPortSecurityLockStatus OBJECT-TYPE Defines the lock status for this particular port entry. | 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.3 | INTEGER {unlock(1), lock(2)} | read-write | mandatory |
| rptrPortSecurityLockAddAddress OBJECT-TYPE Setting a value to this object will cause a new entry to be added to the rptrPortSecurityListTable. When read this object will display an OCTET STRING of SIZE 6 with each octet containing a 0. In general it is possible to add addresses at anytime. However there are several instances where the firmware and or hardware can not support the operation. In these instances an error will be returned if a addition is attempted. | 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.4 | OCTET STRING (SIZE(6)) | read-write | mandatory |
| rptrPortSecurityLockDelAddress OBJECT-TYPE Setting a value to this object will cause corresponding entry in the rptrPortSecurityListTable to be deleted. When read this object returns an OCTET STRING of length 6 with each octet having the value '0'. In general it is possible to delete locked addresses at any time. however there are instances where it is not supported in which case an error will be returned. | 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.5 | OCTET STRING | read-write | mandatory |
| rptrPortSecurityDisableOnViolation OBJECT-TYPE Designates whether port is disabled if its source address is violated. A source address violation occurs when a address is detected which is not in the source address list for this port. If the port is disabled due to the source address violation it can be enabled by setting rptrPortMgmtAdminState. | 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.6 | INTEGER {noDisable(1), disable(2)} | read-write | mandatory |
| rptrPortSecurityFullSecEnabled OBJECT-TYPE A port that is set to full security and is locked will scramble ALL packets, which are not contained in the expected address list, including broadcasts and multicasts. A port that is set to partial security will allow broadcasts and multicasts to repeat unscrambled. | 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.7 | INTEGER {partialSecurity(1), fullSecurity(2)} | read-write | mandatory |
| rptrPortSecuritySecureState OBJECT-TYPE The secure state of the port. If the port is secure(1), it can be locked in order to enable security. A nonSecure(2) port cannot be locked. | 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.8 | INTEGER {secure(1), nonSecure(2)} | read-only | mandatory |
| rptrPortSecurityForceNonSecure OBJECT-TYPE The force non-secure state of port. If the port is Forced, Non-Secure via a value of forceNonSecure(2), it is put into a Non-Secure state, in which case it cannot be locked. If a port is not forced noForce(1), then it will take on its natural state, according to the traffic flow on the port. | 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.9 | INTEGER {noForce(1), forceNonSecure(2)} | read-write | mandatory |
| rptrPortSecurityLearnState OBJECT-TYPE The learn state of the port. This object will only be applied to a port that is unlocked. If set to learn(1), all addresses are deleted on the port and learning begins once again. If it is set to noLearn(2), learning stops on the port. | 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.10 | INTEGER {learn(1), noLearn(2)} | read-write | mandatory |
| rptrPortSecurityLearnMode OBJECT-TYPE The learn mode of the port. If set to oneTime(1), the port is capable of learning two addresses and securing on both destination and source addresses (upon locking port). If set to continuous(2), all addresses are initially deleted and the port continuously replaces the existing secure source address with the latest source address it sees. | 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.11 | INTEGER {oneTime(1), continuous(2)} | read-write | mandatory |
| rptrPortSecurityListTable OBJECT-TYPE This table defines a list of all source address locks maintained for the specified port. | 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2 | not-accessible | mandatory | |
| rptrPortSecurityListEntry OBJECT-TYPE An entry containing objects pertaining to source address locks for a port group. | 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1 | not-accessible | mandatory | |
| rptrPortSecurityListPortGrpId OBJECT-TYPE The port group for which this security list entry pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.1 | INTEGER | read-only | mandatory |
| rptrPortSecurityListPortId OBJECT-TYPE The port ID for which this source address lock list pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.2 | INTEGER | read-only | mandatory |
| rptrPortSecurityListIndex OBJECT-TYPE A unique index for the source address entries. | 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.3 | INTEGER | read-only | mandatory |
| rptrPortSecurityListAddress OBJECT-TYPE Defines the particular source address that has been locked. | 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.4 | OCTET STRING | read-only | mandatory |
| rptrPortAssoc OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.1.1.4.4 | |||
| rptrPortAssocTable OBJECT-TYPE This table defines the port association for those switching MIMs that support this functionality. | 1.3.6.1.4.1.52.4.1.1.1.4.4.1 | not-accessible | mandatory | |
| rptrPortAssocEntry OBJECT-TYPE Describes a particular port association entry. | 1.3.6.1.4.1.52.4.1.1.1.4.4.1.1 | not-accessible | mandatory | |
| rptrPortAssocBoard OBJECT-TYPE The board number for which this port association information pertains. | 1.3.6.1.4.1.52.4.1.1.1.4.4.1.1.1 | INTEGER | read-only | mandatory |
| rptrPortAssocStatus OBJECT-TYPE This object describes the status of the user selectable port. On a TPXMIM34 this is port 13 which may either be an EPIM or default configuration. A value of defaultPort(1) restores the default configuration. A value of otherPort(2) may imply the use of the EPIM connection. | 1.3.6.1.4.1.52.4.1.1.1.4.4.1.1.2 | INTEGER {defaultPort(1), otherPort(2)} | read-write | mandatory |