RBRIDGE-MIB
- Registered at
- 1.3.6.1.2.1.214
- Last updated
- 2013-01-07 00:00
- Organization
- IETF TRILL Working Group
- Revisions
- 2013-01-07 00:00
- Namespace
- standard
- Source file
RBRIDGE-MIB- Digest
sha256:d6807f42926e1e8c103daf3f3179c2421f554389eabd9f5ed6952d46dd2298ef
Description
The RBridge MIB module for managing switches that support the TRILL protocol.
Contact
http://datatracker.ietf.org/wg/trill/charter/ Email: trill@ietf.org Anil Rijhsinghani Hewlett-Packard Tel: +1 508 323 1251 Email: anil@charter.net Kate Zebrose HW Embedded Tel: +1 617 840 9673 Email: zebrose@alum.mit.edu
Imports
| From | Symbols |
|---|---|
| BRIDGE-MIB | BridgeId |
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| Q-BRIDGE-MIB | PortList, VlanId |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Counter64, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso, mib-2 |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RBRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| RbridgeAddress TEXTUAL-CONVENTION The Media Access Control (MAC) address used by an RBridge port. This may match the RBridge IS-IS SystemID. | current | |||
| RbridgeNickname TEXTUAL-CONVENTION The 16-bit identifier used in TRILL as an abbreviation for the RBridge's 48-bit IS-IS System ID. The value 0 means a nickname is not specified, the values 0xFFC0 through 0xFFFE are reserved for future allocation, and the value 0xFFFF is permanently reserved. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| rbridgeNotifications OBJECT-IDENTITY | 1.3.6.1.2.1.214.0 | |||
| rbridgeObjects OBJECT-IDENTITY | 1.3.6.1.2.1.214.1 | |||
| rbridgeBase OBJECT-IDENTITY | 1.3.6.1.2.1.214.1.1 | |||
| rbridgeBaseTrillVersion OBJECT-TYPE The maximum TRILL version number that this RBridge supports. | 1.3.6.1.2.1.214.1.1.1 | Unsigned32 | read-only | current |
| rbridgeBaseNumPorts OBJECT-TYPE The number of ports controlled by this RBridge. | 1.3.6.1.2.1.214.1.1.2 | Unsigned32 | read-only | current |
| rbridgeBaseForwardDelay OBJECT-TYPE Modified aging time for address entries after an appointed forwarder change. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.1.3 | Unsigned32 (4..30) | read-write | current |
| rbridgeBaseUniMultipathEnable OBJECT-TYPE The enabled status of unicast TRILL multipathing. It is enabled when true. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.1.4 | TruthValue | read-write | current |
| rbridgeBaseMultiMultipathEnable OBJECT-TYPE The enabled status of multi-destination TRILL multipathing. It is enabled when true. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.1.5 | TruthValue | read-write | current |
| rbridgeBaseAcceptEncapNonadj OBJECT-TYPE Accept TRILL-encapsulated frames from a neighbor with which this RBridge does not have an IS-IS adjacency, when the value of this object is 'true'. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.1.6 | TruthValue | read-write | current |
| rbridgeBaseNicknameNumber OBJECT-TYPE The number of nicknames this RBridge should acquire. These can be acquired dynamically or configured statically. This value represents the maximum number of entries in rbridgeBaseNicknameTable. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.1.7 | Unsigned32 (1..256) | read-write | current |
| rbridgeBaseNicknameTable OBJECT-TYPE A table that contains information about nicknames configured by an operator or learned dynamically by this RBridge. | 1.3.6.1.2.1.214.1.1.8 | not-accessible | current | |
| rbridgeBaseNicknameEntry OBJECT-TYPE A list of information for each nickname of the RBridge. | 1.3.6.1.2.1.214.1.1.8.1 | not-accessible | current | |
| rbridgeBaseNicknameName OBJECT-TYPE Nicknames are 16-bit quantities that act as abbreviations for RBridge's 48-bit IS-IS System ID to achieve a more compact encoding. | 1.3.6.1.2.1.214.1.1.8.1.1 | RbridgeNickname | not-accessible | current |
| rbridgeBaseNicknamePriority OBJECT-TYPE This RBridge's priority to hold this nickname. When the nickname is configured, the default value of this object is 192. When the nickname is configured, the most significant bit (0x80) must be set and the bottom 7 bits have the default value of 0x40, so 0x80 + 0x40 == 0xC0, which is 192 decimal. Additionally, the bottom 7 bits could be configured to a value other than 0x40. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.1.8.1.2 | Unsigned32 (0..255) | read-create | current |
| rbridgeBaseNicknameDtrPriority OBJECT-TYPE The distribution tree root priority for this nickname. The default value of this object is 32768. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.1.8.1.3 | Unsigned32 (1..65535) | read-create | current |
| rbridgeBaseNicknameType OBJECT-TYPE This object indicates the status of the entry. The default value is static(1). static(1) - this entry has been configured and will remain after the next reset of the RBridge. dynamic(2) - this entry has been acquired by the RBridge nickname acquisition protocol. | 1.3.6.1.2.1.214.1.1.8.1.4 | INTEGER {static(1), dynamic(2)} | read-only | current |
| rbridgeBaseNicknameRowStatus OBJECT-TYPE This object indicates the status of the entry. | 1.3.6.1.2.1.214.1.1.8.1.5 | RowStatus | read-create | current |
| rbridgeBasePortTable OBJECT-TYPE A table that contains generic information about every port that is associated with this RBridge. | 1.3.6.1.2.1.214.1.1.9 | not-accessible | current | |
| rbridgeBasePortEntry OBJECT-TYPE A list of information for each port of the bridge. | 1.3.6.1.2.1.214.1.1.9.1 | not-accessible | current | |
| rbridgeBasePort OBJECT-TYPE The port number of the port for which this entry contains RBridge management information. | 1.3.6.1.2.1.214.1.1.9.1.1 | Unsigned32 (1..65535) | not-accessible | current |
| rbridgeBasePortIfIndex OBJECT-TYPE The value of the instance of the ifIndex object, defined in the IF-MIB, for the interface corresponding to this port. The RBridge port sits on top of this interface. | 1.3.6.1.2.1.214.1.1.9.1.2 | InterfaceIndex | read-only | current |
| rbridgeBasePortDisable OBJECT-TYPE Disable port bit. When this bit is set (true), all frames received or to be transmitted are discarded, with the possible exception of some layer 2 control frames that may be generated and transmitted or received and processed locally. Default value is 'false'. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.1.9.1.3 | TruthValue | read-write | current |
| rbridgeBasePortTrunkPort OBJECT-TYPE End-station service disable (trunk port) bit. When this bit is set (true), all native frames received on the port and all native frames that would have been sent on the port are discarded. Default value is 'false'. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.1.9.1.4 | TruthValue | read-write | current |
| rbridgeBasePortAccessPort OBJECT-TYPE TRILL traffic disable (access port) bit. If this bit is set, the goal is to avoid sending any TRILL frames, except TRILL-Hello frames, on the port, since it is intended only for native end-station traffic. This ensures that the link is not on the shortest path for any destination. Default value is 'false'. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.1.9.1.5 | TruthValue | read-write | current |
| rbridgeBasePortP2pHellos OBJECT-TYPE Use point-to-point (P2P) Hellos bit. If this bit is set, Hellos sent on this port are IS-IS P2P Hellos, not the default TRILL-Hellos. In addition, the IS-IS P2P three-way handshake is used on P2P RBridge links. Default value is 'false'. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.1.9.1.6 | TruthValue | read-write | current |
| rbridgeBasePortState OBJECT-TYPE The port's current state. If the entire port is inhibited, its state is portInhibited(2). If specific VLANs are inhibited, the state is vlanInhibited(3), and rbridgeVlanPortTable will tell which VLANs are inhibited. For ports that are disabled (see rbridgeBasePortDisable), this object will have a value of disabled(4). If the RBridge has detected a port that is malfunctioning, it will place that port into the broken(5) state. | 1.3.6.1.2.1.214.1.1.9.1.7 | INTEGER {uninhibited(1), portInhibited(2), vlanInhibited(3), disabled(4), broken(5)} | read-only | current |
| rbridgeBasePortInhibitionTime OBJECT-TYPE Time in seconds that this RBridge will inhibit forwarding on this port after it observes a spanning tree root bridge change on a link or receives conflicting VLAN forwarder information. The default value is 30. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.1.9.1.8 | Unsigned32 | read-write | current |
| rbridgeBasePortDisableLearning OBJECT-TYPE Disable learning of MAC addresses seen on this port. To disable learning, the value of this object must be set to 'true'. The default is 'false'. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.1.9.1.9 | TruthValue | read-write | current |
| rbridgeBasePortDesiredDesigVlan OBJECT-TYPE The VLAN that a Designated RBridge (DRB) will specify in its TRILL-Hellos as the VLAN to be used by all RBridges on the link for TRILL frames. This VLAN must be enabled on this port. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.1.9.1.10 | VlanId | read-write | current |
| rbridgeBasePortDesigVlan OBJECT-TYPE The VLAN being used on this link for TRILL frames. | 1.3.6.1.2.1.214.1.1.9.1.11 | VlanId | read-only | current |
| rbridgeBasePortStpRoot OBJECT-TYPE The bridge identifier of the root of the spanning tree, as learned from a Bridge PDU (BPDU) received on this port. For the Multiple Spanning Tree Protocol (MSTP), this is the root bridge of the Common and Internal Spanning Tree (CIST). If no BPDU has been heard, the value returned is a string of zeros. | 1.3.6.1.2.1.214.1.1.9.1.12 | BridgeId | read-only | current |
| rbridgeBasePortStpRootChanges OBJECT-TYPE The number of times a change in the root bridge is seen from spanning tree BPDUs received on this port, indicating a change in bridged LAN topology. Each such change may cause the port to be inhibited for a period of time. This counter should be synchronized with ifCounterDiscontinuityTime. Discontinuities in the value of this counter can occur at re-initialization of the management system. | 1.3.6.1.2.1.214.1.1.9.1.13 | Counter32 | read-only | current |
| rbridgeBasePortStpWiringCloset OBJECT-TYPE The Bridge ID to be used as the spanning tree root in BPDUs sent for the Wiring Closet topology solution described in [RFC6325]. Note that the same value of this object must be set on all RBridge ports participating in this solution. The default value is all 0s. A non-zero value configured into this object indicates that this solution is in use. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.1.9.1.14 | BridgeId | read-write | current |
| rbridgeFdb OBJECT-IDENTITY | 1.3.6.1.2.1.214.1.2 | |||
| rbridgeConfidenceNative OBJECT-TYPE The confidence level associated with MAC addresses learned from native frames. This is applicable to all RBridge ports. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.2.1 | Unsigned32 (0..255) | read-write | current |
| rbridgeConfidenceDecap OBJECT-TYPE The confidence level associated with inner MAC addresses learned after decapsulation of a TRILL data frame. This is applicable to all RBridge ports. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.2.2 | Unsigned32 (0..255) | read-write | current |
| rbridgeConfidenceStatic OBJECT-TYPE The confidence level associated with MAC addresses that are statically configured. The default value is 255. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.2.3 | Unsigned32 (0..255) | read-write | current |
| rbridgeUniFdbTable OBJECT-TYPE A table that contains information about unicast entries for which the device has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame. | 1.3.6.1.2.1.214.1.2.4 | not-accessible | current | |
| rbridgeUniFdbEntry OBJECT-TYPE Information about a specific unicast MAC address for which the RBridge has some forwarding and/or filtering information. | 1.3.6.1.2.1.214.1.2.4.1 | not-accessible | current | |
| rbridgeFdbId OBJECT-TYPE The identity of this Filtering Database. | 1.3.6.1.2.1.214.1.2.4.1.1 | Unsigned32 (0..4294967295) | not-accessible | current |
| rbridgeUniFdbAddr OBJECT-TYPE A unicast MAC address for which the device has forwarding information. | 1.3.6.1.2.1.214.1.2.4.1.2 | MacAddress | not-accessible | current |
| rbridgeUniFdbPort OBJECT-TYPE Either the value '0', or the RBridge port number of the port on which a frame having a source address equal to the value of the corresponding instance of rbridgeUniFdbAddr has been seen. A value of '0' indicates that the port number has not been learned but that the device does have some information about this MAC address. Implementors are encouraged to assign the port value to this object whenever it is available, even for addresses for which the corresponding value of rbridgeUniFdbStatus is not learned(3). | 1.3.6.1.2.1.214.1.2.4.1.3 | Unsigned32 (0..65535) | read-only | current |
| rbridgeUniFdbNickname OBJECT-TYPE The RBridge nickname that is placed in the egress nickname field of a TRILL frame sent to this rbridgeFdbAddress in this rbridgeFdbId. | 1.3.6.1.2.1.214.1.2.4.1.4 | RbridgeNickname | read-only | current |
| rbridgeUniFdbConfidence OBJECT-TYPE The confidence level associated with this entry. | 1.3.6.1.2.1.214.1.2.4.1.5 | Unsigned32 (0..255) | read-only | current |
| rbridgeUniFdbStatus OBJECT-TYPE The status of this entry. The meanings of the values are: other(1) - none of the following. invalid(2) - this entry is no longer valid (e.g., it was learned but has since aged out) but has not yet been flushed from the table. learned(3) - the information in this entry was learned and is being used. self(4) - the value of the corresponding instance of rbridgeFdbAddress represents one of the device's addresses. The corresponding instance of rbridgeFdbPort indicates which of the device's ports has this address. mgmt(5) - the value of the corresponding instance of rbridgeFdbAddress was configured by management. esadi(6) - the value of the corresponding instance of rbridgeFdbAddress was learned from ESADI. | 1.3.6.1.2.1.214.1.2.4.1.6 | INTEGER {other(1), invalid(2), learned(3), self(4), mgmt(5), esadi(6)} | read-only | current |
| rbridgeUniFibTable OBJECT-TYPE A table that contains information about nicknames known by the RBridge. If Equal-Cost Multipath (ECMP) is implemented, there are as many entries for a nickname as there are ECMP paths available for it. | 1.3.6.1.2.1.214.1.2.5 | not-accessible | current | |
| rbridgeUniFibEntry OBJECT-TYPE A list of information about nicknames known by the RBridge. If ECMP is implemented, there are as many entries as there are ECMP paths available for a given nickname. | 1.3.6.1.2.1.214.1.2.5.1 | not-accessible | current | |
| rbridgeUniFibNickname OBJECT-TYPE An RBridge nickname for which this RBridge has forwarding information. | 1.3.6.1.2.1.214.1.2.5.1.1 | RbridgeNickname | not-accessible | current |
| rbridgeUniFibPort OBJECT-TYPE The RBridge port number of the port attached to the next-hop RBridge for the path towards the RBridge whose nickname is specified in this entry. | 1.3.6.1.2.1.214.1.2.5.1.2 | Unsigned32 (0..65535) | not-accessible | current |
| rbridgeUniFibNextHop OBJECT-TYPE The nickname of the next-hop RBridge for the path towards the RBridge whose nickname is specified in this entry. | 1.3.6.1.2.1.214.1.2.5.1.3 | RbridgeNickname | not-accessible | current |
| rbridgeUniFibHopCount OBJECT-TYPE The hop count from this ingress RBridge to the egress RBridge whose nickname is specified in rbridgeUniFibNickname. | 1.3.6.1.2.1.214.1.2.5.1.4 | Unsigned32 | read-only | current |
| rbridgeMultiFibTable OBJECT-TYPE A table that contains information about egress nicknames used for multi-destination frame forwarding by this RBridge. | 1.3.6.1.2.1.214.1.2.6 | not-accessible | current | |
| rbridgeMultiFibEntry OBJECT-TYPE A list of information about egress nicknames used for multi-destination frame forwarding by this RBridge. | 1.3.6.1.2.1.214.1.2.6.1 | not-accessible | current | |
| rbridgeMultiFibNickname OBJECT-TYPE The nickname of the multicast distribution tree. | 1.3.6.1.2.1.214.1.2.6.1.1 | RbridgeNickname | not-accessible | current |
| rbridgeMultiFibPorts OBJECT-TYPE The list of ports to which a frame destined to this multicast distribution tree is flooded. This may be pruned further based on other forwarding information. | 1.3.6.1.2.1.214.1.2.6.1.2 | PortList | read-only | current |
| rbridgeVlan OBJECT-IDENTITY | 1.3.6.1.2.1.214.1.3 | |||
| rbridgeVlanTable OBJECT-TYPE A table that contains information about VLANs on the RBridge. | 1.3.6.1.2.1.214.1.3.1 | not-accessible | current | |
| rbridgeVlanEntry OBJECT-TYPE A list of information about VLANs on the RBridge. | 1.3.6.1.2.1.214.1.3.1.1 | not-accessible | current | |
| rbridgeVlanIndex OBJECT-TYPE The VLAN-ID referring to this VLAN. | 1.3.6.1.2.1.214.1.3.1.1.1 | Unsigned32 (1..4094 | 4096..4294967295) | not-accessible | current |
| rbridgeVlanForwarderLosts OBJECT-TYPE The number of times this RBridge has lost appointed forwarder status for this VLAN on any of its ports. Discontinuities in the value of this counter can occur at re-initialization of the management system. | 1.3.6.1.2.1.214.1.3.1.1.2 | Counter32 | read-only | current |
| rbridgeVlanDisableLearning OBJECT-TYPE Disable learning of MAC addresses seen in this VLAN. One application of this may be to restrict learning to ESADI. To disable learning, the value of this object should be set to 'true'. The default is 'false'. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.3.1.1.3 | TruthValue | read-write | current |
| rbridgeVlanSnooping OBJECT-TYPE IP Multicast Snooping on this VLAN. For RBridges performing both IPv4 and IPv6 IP Multicast Snooping, the value returned is ipv4v6(4). | 1.3.6.1.2.1.214.1.3.1.1.4 | INTEGER {notSupported(1), ipv4(2), ipv6(3), ipv4v6(4)} | read-only | current |
| rbridgeVlanPortTable OBJECT-TYPE A table that contains information about VLANs on an RBridge port. | 1.3.6.1.2.1.214.1.3.2 | not-accessible | current | |
| rbridgeVlanPortEntry OBJECT-TYPE A list of information about VLANs on the RBridge port. | 1.3.6.1.2.1.214.1.3.2.1 | not-accessible | current | |
| rbridgeVlanPortInhibited OBJECT-TYPE This VLAN has been inhibited by the RBridge due to conflicting forwarder information received from another RBridge, when the value of this object is 'true'. | 1.3.6.1.2.1.214.1.3.2.1.1 | TruthValue | read-only | current |
| rbridgeVlanPortForwarder OBJECT-TYPE This RBridge is an appointed forwarder for this VLAN on this port, when the value of this object is 'true'. | 1.3.6.1.2.1.214.1.3.2.1.2 | TruthValue | read-only | current |
| rbridgeVlanPortAnnouncing OBJECT-TYPE TRILL-Hellos tagged with this VLAN can be sent by this RBridge on this port, when the value of this object is 'true'. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.3.2.1.3 | TruthValue | read-write | current |
| rbridgeVlanPortDetectedVlanMapping OBJECT-TYPE VLAN mapping has been detected on the link attached to this port, when the value of this object is 'true'. | 1.3.6.1.2.1.214.1.3.2.1.4 | TruthValue | read-only | current |
| rbridgeEsadi OBJECT-IDENTITY | 1.3.6.1.2.1.214.1.4 | |||
| rbridgeEsadiTable OBJECT-TYPE A table that contains information about ESADI instances on VLANs, if available. | 1.3.6.1.2.1.214.1.4.1 | not-accessible | current | |
| rbridgeEsadiEntry OBJECT-TYPE Information about an ESADI instance on a VLAN. | 1.3.6.1.2.1.214.1.4.1.1 | not-accessible | current | |
| rbridgeEsadiEnable OBJECT-TYPE If the RBridge is participating in an ESADI instance for this VLAN, the value of this object is 'true'. To disable participation, set it to 'false'. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.4.1.1.1 | TruthValue | read-create | current |
| rbridgeEsadiConfidence OBJECT-TYPE Confidence level of address entries sent by this ESADI instance. The default is 16. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.4.1.1.2 | Unsigned32 (0..255) | read-create | current |
| rbridgeEsadiDrbPriority OBJECT-TYPE The priority of this RBridge for being selected as the DRB for this ESADI instance. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.4.1.1.3 | Unsigned32 (0..127) | read-create | current |
| rbridgeEsadiDrb OBJECT-TYPE The DRB on this ESADI instance's virtual link. | 1.3.6.1.2.1.214.1.4.1.1.4 | RbridgeAddress | read-only | current |
| rbridgeEsadiDrbHoldingTime OBJECT-TYPE The holding time for this ESADI instance. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.4.1.1.5 | Unsigned32 (0..127) | read-create | current |
| rbridgeEsadiRowStatus OBJECT-TYPE This object indicates the status of the entry. | 1.3.6.1.2.1.214.1.4.1.1.6 | RowStatus | read-create | current |
| rbridgeCounter OBJECT-IDENTITY | 1.3.6.1.2.1.214.1.5 | |||
| rbridgePortCounterTable OBJECT-TYPE A table that contains per-port counters for this RBridge. | 1.3.6.1.2.1.214.1.5.1 | not-accessible | current | |
| rbridgePortCounterEntry OBJECT-TYPE Counters for a port on this RBridge. | 1.3.6.1.2.1.214.1.5.1.1 | not-accessible | current | |
| rbridgePortRpfCheckFails OBJECT-TYPE The number of times a multi-destination frame was dropped on this port because the Reverse Path Forwarding (RPF) check failed. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime object of the associated interface. | 1.3.6.1.2.1.214.1.5.1.1.1 | Counter32 | read-only | current |
| rbridgePortHopCountExceeds OBJECT-TYPE The number of times a frame was dropped on this port because its hop count was zero. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime object of the associated interface. | 1.3.6.1.2.1.214.1.5.1.1.2 | Counter32 | read-only | current |
| rbridgePortOptionDrops OBJECT-TYPE The number of times a frame was dropped on this port because it contained unsupported options. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime object of the associated interface. | 1.3.6.1.2.1.214.1.5.1.1.3 | Counter32 | read-only | current |
| rbridgePortTrillInFrames OBJECT-TYPE The number of TRILL-encapsulated frames that have been received by this port from its attached link, including management frames. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime object of the associated interface. | 1.3.6.1.2.1.214.1.5.1.1.4 | Counter64 | read-only | current |
| rbridgePortTrillOutFrames OBJECT-TYPE The number of TRILL-encapsulated frames that have been transmitted by this port to its attached link, including management frames. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime object of the associated interface. | 1.3.6.1.2.1.214.1.5.1.1.5 | Counter64 | read-only | current |
| rbridgeSnooping OBJECT-IDENTITY | 1.3.6.1.2.1.214.1.6 | |||
| rbridgeSnoopingPortTable OBJECT-TYPE For RBridges implementing IP Multicast Snooping, information about ports on which the presence of IPv4 or IPv6 multicast routers has been detected. | 1.3.6.1.2.1.214.1.6.1 | not-accessible | current | |
| rbridgeSnoopingPortEntry OBJECT-TYPE Information about ports on which the presence of IPv4 or IPv6 multicast routers has been detected for a VLAN. | 1.3.6.1.2.1.214.1.6.1.1 | not-accessible | current | |
| rbridgeSnoopingPortAddrType OBJECT-TYPE The IP address type of an IP multicast router detected on this port and VLAN. If only IPv4 router(s) are detected, the value returned is 'ipv4'. If only IPv6 routers are detected, the value returned is 'ipv6'. If both IPv4 and IPv6 routers are detected on this port and VLAN, the value returned is 'ipv4v6'. | 1.3.6.1.2.1.214.1.6.1.1.1 | INTEGER {ipv4(1), ipv6(2), ipv4v6(3)} | read-only | current |
| rbridgeSnoopingAddrTable OBJECT-TYPE For RBridges implementing IP Multicast Snooping, information about IP multicast addresses being snooped. | 1.3.6.1.2.1.214.1.6.2 | not-accessible | current | |
| rbridgeSnoopingAddrEntry OBJECT-TYPE Information about IP multicast addresses being snooped. | 1.3.6.1.2.1.214.1.6.2.1 | not-accessible | current | |
| rbridgeSnoopingAddrType OBJECT-TYPE The IP multicast address type for which a listener has been detected by this RBridge. This MIB requires support for only IPv4 and IPv6 address types. | 1.3.6.1.2.1.214.1.6.2.1.1 | InetAddressType | not-accessible | current |
| rbridgeSnoopingAddr OBJECT-TYPE The IP multicast address for which a listener has been detected by this RBridge. The address type of this object is specified in rbridgeSnoopingAddrType. This MIB requires support for only global IPv4 and IPv6 addresses, so the length of the object can be either 4 or 16 bytes. Hence, the index will not exceed the OID size limit. | 1.3.6.1.2.1.214.1.6.2.1.2 | InetAddress | not-accessible | current |
| rbridgeSnoopingAddrPorts OBJECT-TYPE The set of ports on which a listener has been detected for this IP multicast address. | 1.3.6.1.2.1.214.1.6.2.1.3 | PortList | read-only | current |
| rbridgeDtree OBJECT-IDENTITY | 1.3.6.1.2.1.214.1.7 | |||
| rbridgeDtreePriority OBJECT-TYPE The distribution tree root priority for this RBridge. The default value of this object is 32768. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.7.1 | Unsigned32 (1..65535) | read-write | current |
| rbridgeDtreeActiveTrees OBJECT-TYPE The total number of trees being computed by all RBridges in the campus. | 1.3.6.1.2.1.214.1.7.2 | Unsigned32 | read-only | current |
| rbridgeDtreeMaxTrees OBJECT-TYPE The maximum number of trees this RBridge can compute. | 1.3.6.1.2.1.214.1.7.3 | Unsigned32 | read-only | current |
| rbridgeDtreeDesiredUseTrees OBJECT-TYPE The maximum number of trees this RBridge would like to use for transmission of ingress multi-destination frames. | 1.3.6.1.2.1.214.1.7.4 | Unsigned32 | read-only | current |
| rbridgeDtreeTable OBJECT-TYPE Information about distribution trees being computed by this RBridge. | 1.3.6.1.2.1.214.1.7.5 | not-accessible | current | |
| rbridgeDtreeEntry OBJECT-TYPE List of information about distribution trees being computed by this RBridge. | 1.3.6.1.2.1.214.1.7.5.1 | not-accessible | current | |
| rbridgeDtreeNumber OBJECT-TYPE The tree number of a distribution tree being computed by this RBridge. | 1.3.6.1.2.1.214.1.7.5.1.1 | Unsigned32 (0..65535) | not-accessible | current |
| rbridgeDtreeNickname OBJECT-TYPE The nickname of the distribution tree. | 1.3.6.1.2.1.214.1.7.5.1.2 | RbridgeNickname | read-only | current |
| rbridgeDtreeIngress OBJECT-TYPE Indicates whether this RBridge might choose this distribution tree to ingress a multi-destination frame. | 1.3.6.1.2.1.214.1.7.5.1.3 | TruthValue | read-only | current |
| rbridgeTrill OBJECT-IDENTITY | 1.3.6.1.2.1.214.1.8 | |||
| rbridgeTrillMinMtuDesired OBJECT-TYPE The desired minimum acceptable inter-RBridge link MTU for the campus, that is, originatingLSPBufferSize. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.8.1 | Unsigned32 | read-write | current |
| rbridgeTrillSz OBJECT-TYPE The minimum acceptable inter-RBridge link size for the campus for the proper operation of TRILL IS-IS. | 1.3.6.1.2.1.214.1.8.2 | Unsigned32 | read-only | current |
| rbridgeTrillMaxMtuProbes OBJECT-TYPE The number of failed MTU-probes before the RBridge concludes that a particular MTU is not supported by a neighbor. The value of this object MUST be retained across re-initializations of the management system. | 1.3.6.1.2.1.214.1.8.3 | Unsigned32 (1..255) | read-write | current |
| rbridgeTrillNbrTable OBJECT-TYPE Information about this RBridge's TRILL neighbors. | 1.3.6.1.2.1.214.1.8.4 | not-accessible | current | |
| rbridgeTrillNbrEntry OBJECT-TYPE List of information about this RBridge's TRILL neighbors. | 1.3.6.1.2.1.214.1.8.4.1 | not-accessible | current | |
| rbridgeTrillNbrMacAddr OBJECT-TYPE The MAC address of a neighbor of this RBridge. | 1.3.6.1.2.1.214.1.8.4.1.1 | MacAddress | not-accessible | current |
| rbridgeTrillNbrMtu OBJECT-TYPE MTU size for this neighbor for IS-IS communication purposes. | 1.3.6.1.2.1.214.1.8.4.1.2 | Unsigned32 | read-only | current |
| rbridgeTrillNbrFailedMtuTest OBJECT-TYPE If true, indicates that the neighbor's tested MTU is less than the minimum acceptable inter-bridge link MTU for the campus (1470). | 1.3.6.1.2.1.214.1.8.4.1.3 | TruthValue | read-only | current |
| rbridgeConformance OBJECT-IDENTITY | 1.3.6.1.2.1.214.2 | |||
| rbridgeCompliances OBJECT-IDENTITY | 1.3.6.1.2.1.214.2.1 | |||
| rbridgeGroup OBJECT-IDENTITY | 1.3.6.1.2.1.214.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| rbridgeBaseNewDrb NOTIFICATION-TYPE The rbridgeBaseNewDrb notification indicates that the sending agent has become the new Designated RBridge; the notification is sent by an RBridge soon after its election as the new DRB root, e.g., upon expiration of the Topology Change Timer, immediately subsequent to its election. | 1.3.6.1.2.1.214.0.1 | current |
| rbridgeBaseTopologyChange NOTIFICATION-TYPE The rbridgeBaseTopologyChange notification is sent by an RBridge when any of its configured ports transition to/from the VLAN-x designated forwarder. The notification is not sent if an rbridgeBaseNewDrb notification is sent for the same transition. | 1.3.6.1.2.1.214.0.2 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| rbridgeCompliance MODULE-COMPLIANCE The compliance statement for support of RBridge services. | 1.3.6.1.2.1.214.2.1.1 | current |
| rbridgeReadOnlyCompliance MODULE-COMPLIANCE When this MIB is implemented in read-only mode, then the implementation can claim read-only compliance. In that case, RBridge objects can be monitored but cannot be configured with this implementation. | 1.3.6.1.2.1.214.2.1.2 | current |
| rbridgeBaseGroup OBJECT-GROUP A collection of objects providing basic control and status information for the RBridge. | 1.3.6.1.2.1.214.2.2.1 | current |
| rbridgeBaseNicknameGroup OBJECT-GROUP A collection of objects providing basic control and status information for RBridge nicknames. | 1.3.6.1.2.1.214.2.2.2 | current |
| rbridgeBasePortGroup OBJECT-GROUP A collection of objects providing basic control and status information for RBridge ports. | 1.3.6.1.2.1.214.2.2.3 | current |
| rbridgeFdbGroup OBJECT-GROUP A collection of objects providing information about the Unicast Address Database. | 1.3.6.1.2.1.214.2.2.4 | current |
| rbridgeFibGroup OBJECT-GROUP A collection of objects providing information about the Unicast and Multicast FIBs. | 1.3.6.1.2.1.214.2.2.5 | current |
| rbridgeVlanGroup OBJECT-GROUP A collection of objects providing information about VLANs on the RBridge. | 1.3.6.1.2.1.214.2.2.6 | current |
| rbridgePortCounterGroup OBJECT-GROUP A collection of objects providing per-port counters for the RBridge. | 1.3.6.1.2.1.214.2.2.7 | current |
| rbridgeEsadiGroup OBJECT-GROUP A collection of objects providing information about ESADI instances on the RBridge. | 1.3.6.1.2.1.214.2.2.8 | current |
| rbridgeSnoopingGroup OBJECT-GROUP A collection of objects providing information about IP Multicast Snooping. This MIB requires support for only global IPv4 and IPv6 address types in rbridgeSnoopingPortAddrType and rbridgeSnoopingAddrType, so the length of rbridgeSnoopingAddr can be either 4 or 16 bytes. | 1.3.6.1.2.1.214.2.2.9 | current |
| rbridgeDtreeGroup OBJECT-GROUP A collection of objects providing information about distribution trees. | 1.3.6.1.2.1.214.2.2.10 | current |
| rbridgeTrillGroup OBJECT-GROUP A collection of objects providing information about TRILL neighbors. | 1.3.6.1.2.1.214.2.2.11 | current |
| rbridgeNotificationGroup NOTIFICATION-GROUP A collection of objects describing notifications (traps). | 1.3.6.1.2.1.214.2.2.12 | current |