MIBs Depot

RAPID-HA-MIB

Registered at
1.3.6.1.4.1.4355.6.6
Last updated
1902-11-01 12:00
Organization
WatchGuard Technologies, Inc.
Revisions
2002-11-01 12:00
Namespace
nortel
Source file
RAPID-HA-MIB
Digest
sha256:91d708f6ac42c2fbd614d3b8bcce44b65ca0b828324983144a745056ef830c14

Description

The MIB module describes general information of RapidStream system. Mainly, the information obtained from this MIB is used by rsInfoSystemMIB, rsClientMIB, rsSystemStatisticsMIB, rsIpsecTunnelMIB, rsHAMIB.

Contact

Ella Yu WatchGuard Technologies, Inc. 1841 Zanker Road San Jose, CA 95112 USA 408-519-4888 ella.yu@watchguard.com

Imports

FromSymbols
RAPID-MIBrapidstream
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso
SNMPv2-TCDateAndTime, DisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

RAPID-HA-MIB
RAPID-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
rsHAMIB
OBJECT-IDENTITY
This is the base object identifier for all HA related branches.
1.3.6.1.4.1.4355.6.6current
rsHALocal
OBJECT-IDENTITY
This is the base object identifier for all objects which are belong to local appliance.
1.3.6.1.4.1.4355.6.6.1current
rsHAStatus
OBJECT-TYPE
Indicates current status of local appliance. disabled: The local appliance of HA system is not enabled. unknown: The local appliance of HA system is in initialization as-primary-active: The local appliance that is the primary appliance of HA/AS system is in active mode. This status is also called MASTER in some systems. as-secondary-active: The local appliance that is the secondary appliance of HA/AS system is in active mode. This status is also called BACKUP in some systems. aa-primary-ative: The local appliance that is the primary appliance of HA/AA system is in active mode. aa-secondary-active: The local appliance that is the secondary appliance of HA/AA system is in active mode. aa-primary-takeover: The local appliance that is the primary appliance of HA/AA system has taken over the peer's duty. aa-secondary-takeover: The local appliance of the secondary appliance of HA/AA system has taken over the peer's duty. standby: The local appliance of HA/AS system is in standby mode. admin: The local appliance of HA system detects an mismatched configuration and waits for system administrator to reslove the conflict. failed: The local appliance of the HA system is down due to forced failover or other reasons. unavailable: It's reported when local appliance of HA system is unabled to get status information.
1.3.6.1.4.1.4355.6.6.1.1INTEGER {disabled(0), unknown(1), as-primary-active(2), as-secondary-active(3), aa-primary-ative(4), aa-secondary-active(5), aa-primary-takeover(6), aa-secondary-takeover(7), standby(8), admin(9), failed(10), unavailable(11)}read-onlycurrent
rsHAPeerStatus
OBJECT-TYPE
Indicates current status of peer appliance. unavailable: It's reported when peer appliance of HA system is unabled to get status information. active: The peer applicance of HA system is in active mode. standby: The peer applicance of HA system is in standby mode. admin: The peer applicance of HA system dectects an mismatched configuration and waits for system administrator to reslove the conflict. failed: The peer appliance of HA system is down due to forced failover or other reasons.
1.3.6.1.4.1.4355.6.6.1.2INTEGER {unavailable(0), active(1), standby(2), admin(3), failed(4)}read-onlycurrent
rsHALastDBSyncTime
OBJECT-TYPE
The last DB synchronized time of local appliance.
1.3.6.1.4.1.4355.6.6.1.3DateAndTimeread-onlycurrent
rsHAError
OBJECT-TYPE
Reports the current error that occurred in local appliance .
1.3.6.1.4.1.4355.6.6.1.4INTEGER {no-error(0), mismatched-ha-id(1), mismatched-software(2), mismatched-database(3), mismatched-hardware(4), forced-fail(5), invalid-ha-role(6), link-down(7), lost-mia-heartbeat(8), mia-not-responding(9), admin-command-failed(10), detect-ha-error(11), unavailable(12), hotsync-failed(13), config-sync-failed(14)}read-onlycurrent
rsHAPeerError
OBJECT-TYPE
Reports the current error that occurred in peer appliance.
1.3.6.1.4.1.4355.6.6.1.5INTEGER {no-error(0), mismatched-ha-id(1), mismatched-software(2), mismatched-database(3), mismatched-hardware(4), forced-fail(5), invalid-ha-role(6), link-down(7), lost-mia-heartbeat(8), mia-not-responding(9), admin-command-failed(10), detect-ha-error(11), unavailable(12), hotsync-failed(13), config-sync-failed(14)}read-onlycurrent
rsHAPeer
OBJECT-IDENTITY
This is the base object identifier for all objects which are belong to peer appliance.
1.3.6.1.4.1.4355.6.6.2current
rsHAPeerSerialNumber
OBJECT-TYPE
The serial number of peer appliance.
1.3.6.1.4.1.4355.6.6.2.1OCTET STRINGread-onlycurrent
rsHAPeerLastDBSyncTime
OBJECT-TYPE
The last DB synchronized time of peer appliance.
1.3.6.1.4.1.4355.6.6.2.2DateAndTimeread-onlycurrent
rsHAPeerDevice
OBJECT-IDENTITY
This is the base object for parameters and configuration data of devices in this entity.
1.3.6.1.4.1.4355.6.6.2.3current
rsHAPeerIfNumber
OBJECT-TYPE
The number of RapidCard installed in this entity.
1.3.6.1.4.1.4355.6.6.2.3.1Unsigned32read-onlycurrent
rsHAPeerIfTable
OBJECT-TYPE
A list of RapidCard entries. The number of entries is given by the value of rsHAPeerDeviceNumber.
1.3.6.1.4.1.4355.6.6.2.3.2not-accessiblecurrent
rsHAPeerIfEntry
OBJECT-TYPE
A RapidCard entry containing objects for a particular RapidCard.
1.3.6.1.4.1.4355.6.6.2.3.2.1not-accessiblecurrent
rsHAPeerIfIndex
OBJECT-TYPE
The unique value for each interface.
1.3.6.1.4.1.4355.6.6.2.3.2.1.1Unsigned32read-onlycurrent
rsHAPeerIfIpAddr
OBJECT-TYPE
The ip address of the interface.
1.3.6.1.4.1.4355.6.6.2.3.2.1.4IpAddressread-onlycurrent
rsHAPeerIfLinkStatus
OBJECT-TYPE
The current state of the interface.
1.3.6.1.4.1.4355.6.6.2.3.2.1.9INTEGER {down(0), up(1), other(2)}read-onlycurrent
rsHAPeerCounters
OBJECT-IDENTITY
This is the base object for parameters and configuration data of devices in this entity.
1.3.6.1.4.1.4355.6.6.2.4current
rsHAPeerSystemCpuUtil
OBJECT-TYPE
The CPU utilization of the peer system in last 5 seconds.
1.3.6.1.4.1.4355.6.6.2.4.1Gauge32read-onlycurrent
rsHAPeerSystemTotalSendBytes
OBJECT-TYPE
The total number of bytes sent since peer system is up.
1.3.6.1.4.1.4355.6.6.2.4.2Counter64read-onlycurrent
rsHAPeerSystemTotalRecvBytes
OBJECT-TYPE
The total number of bytes received since peer system is up.
1.3.6.1.4.1.4355.6.6.2.4.3Counter64read-onlycurrent
rsHAPeerSystemTotalSendPackets
OBJECT-TYPE
The total number of packets sent since peer system is up.
1.3.6.1.4.1.4355.6.6.2.4.4Counter64read-onlycurrent
rsHAPeerSystemTotalRecvPackets
OBJECT-TYPE
The total number of packets received since peer system is up.
1.3.6.1.4.1.4355.6.6.2.4.5Counter64read-onlycurrent
rsHAPeerSystemStreamReqTotal
OBJECT-TYPE
The total number of the connection requests since system is up.
1.3.6.1.4.1.4355.6.6.2.4.6Counter64read-onlycurrent
rsHAPeerSystemStreamReqDrop
OBJECT-TYPE
The total number of the connection requests being dropped since system is up.
1.3.6.1.4.1.4355.6.6.2.4.7Counter64read-onlycurrent
rsHAPeerSystemCurrIpsecTunnels
OBJECT-TYPE
The number of ipsec tunnels in the peer system currently.
1.3.6.1.4.1.4355.6.6.2.4.8Counter64read-onlycurrent
rsHAPeerSystemCpuUtil1
OBJECT-TYPE
The CPU utilization of the peer system in last 1 minute.
1.3.6.1.4.1.4355.6.6.2.4.9Gauge32read-onlycurrent
rsHAPeerSystemCpuUtil5
OBJECT-TYPE
The CPU utilization of the peer system in last 5 minutes.
1.3.6.1.4.1.4355.6.6.2.4.10Gauge32read-onlycurrent
rsHAPeerSystemCpuUtil15
OBJECT-TYPE
The CPU utilization of the peer system in last 15 minutes.
1.3.6.1.4.1.4355.6.6.2.4.11Gauge32read-onlycurrent