MIBs Depot

RAISECOM-POWERMONITOR-MIB

Registered at
1.3.6.1.4.1.8886.1.24
Last updated
2011-01-19 00:00
Organization
Raisecom, Inc.
Namespace
raisecom
Source file
RAISECOM-POWERMONITOR-MIB
Digest
sha256:8a0398ef634ee3636d0893012416b85178139f006ba894088158ba04757aa3f7

Description

The initial revision of this MIB.

Contact

Raise Systems Postal: Beijing, China Tel: 86-010-82884499 E-mail: support@raisecom.com

Imports

FromSymbols
RAISECOM-BASE-MIBraisecomAgent
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

RAISECOM-BASE-MIB
RAISECOM-POWERMONITOR-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
raisecomPowerMonitorNotification
OBJECT-IDENTITY
1.3.6.1.4.1.8886.1.24.1
raisecomPowerMonitorMibObjects
OBJECT-IDENTITY
1.3.6.1.4.1.8886.1.24.2
raisecomPowerMonitorStateTable
OBJECT-TYPE
Power monitor state table.
1.3.6.1.4.1.8886.1.24.2.1not-accessiblecurrent
raisecomPowerMonitorStateEntry
OBJECT-TYPE
Power monitor state entry.
1.3.6.1.4.1.8886.1.24.2.1.1not-accessiblecurrent
raisecomPowerIndex
OBJECT-TYPE
Specify the sequence number of Power.
1.3.6.1.4.1.8886.1.24.2.1.1.1Unsigned32not-accessiblecurrent
raisecomPowerSerialNumber
OBJECT-TYPE
specify the identical serial number of current power card,this string number will be set when device leaving factory
1.3.6.1.4.1.8886.1.24.2.1.1.2OCTET STRINGread-onlycurrent
raisecomPowerType
OBJECT-TYPE
Specify the current type of the power. ac(1) means the current power AC Input. dc(2) means the current power DC Input.
1.3.6.1.4.1.8886.1.24.2.1.1.3INTEGER {ac(1), dc(2)}read-onlycurrent
raisecomPowerVoltReference
OBJECT-TYPE
Specify the reference of the volt value of Power.
1.3.6.1.4.1.8886.1.24.2.1.1.4INTEGERread-onlycurrent
raisecomPowerVoltValue
OBJECT-TYPE
Specify the volt value of Power.
1.3.6.1.4.1.8886.1.24.2.1.1.5INTEGERread-onlycurrent
raisecomPowerStatus
OBJECT-TYPE
The status of power alarm.
1.3.6.1.4.1.8886.1.24.2.1.1.6INTEGER {offline(1), online(2), power-on(3)}read-onlycurrent

Notifications

NameOIDStatus
raisecomPowerVoltNormal
NOTIFICATION-TYPE
The trap notification occur when power-card value translating from abnormal to normal.
1.3.6.1.4.1.8886.1.24.1.1current
raisecomPowerVoltAbnormal
NOTIFICATION-TYPE
The trap notification occur when power-card value translating from normal to abnormal.
1.3.6.1.4.1.8886.1.24.1.2current
raisecomPowerStatusTrap
NOTIFICATION-TYPE
A raisecomPowerTrap trap is sent when a power alarm generate.
1.3.6.1.4.1.8886.1.24.1.3current
raisecomDyingGaspTrap
NOTIFICATION-TYPE
Dying gasp.
1.3.6.1.4.1.8886.1.24.1.4current