RAISECOM-OPTICAL-MONITOR-MIB
- Registered at
- 1.3.6.1.4.1.8886.1.9
- Last updated
- 2006-06-06 00:00
- Organization
- Raisecom, Inc.
- Revisions
- 2006-06-06 00:00
- Namespace
- raisecom
- Source file
RAISECOM-OPTICAL-MONITOR-MIB- Digest
sha256:414fbd8e76c731f25b29d3f1e13030fd9efadf868c94907a1a08189d70282bd5
Description
This MIB module defines objects to monitor optical characteristics on the optical interfaces in a network element.
Contact
Raise Systems Postal: Beijing, China Tel: 86-010-82884499 E-mail: chenyu@raisecom.com
Imports
| From | Symbols |
|---|---|
| IF-MIB | ifIndex |
| RAISECOM-BASE-MIB | raisecomAgent |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
| SWITCH-TC | EnableVar |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB RAISECOM-BASE-MIB RAISECOM-OPTICAL-MONITOR-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC SWITCH-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| OpticalPMPeriod TEXTUAL-CONVENTION This value indicates the time period over which performance monitoring data has been collected. | current | |||
| OpticalParameterType TEXTUAL-CONVENTION This value indicates the optical parameter that is being monitored. Valid values are - temperature(1) supplyVoltage(2) biasCurrent(3) txOutputPower(4) receivedPower(5) | current | |||
| OpticalParameterValue TEXTUAL-CONVENTION The value of the optical parameter that is being monitored. The range of values varies depending on the type of optical parameter being monitored, as identified by a corresponding object with syntax OpticalParameterType. When the optical parameter being monitored is 'temperature', the supported range is from -32768 to 32768, in units of 1/256 degrees centigrade. Example: A value of 6016 represents a temperature reading of 23.5 degrees C. When the optical parameter being monitored is 'supplyVoltage', the supported range is from 0 to 65535, in units of 1/10 millivolts. Example: A value of 55000 represents a supplyVoltage reading of 5.5 V. When the optical parameter being monitored is 'biasCurrent', the supported range is from 0 to 65535, in units of 1/500 microamperes. Example: A value of 500 represents a bias current reading of 1 microamperes. When the optical parameter being monitored is 'txOutputPower', the supported range is from 0 to 65535, in units of 1/10000 mW ..and express in units of dBm. Example: A value of 60000 represents a txOutputPower reading of 7.78 dBm. When the optical parameter being monitored is 'receivedPower', the supported range is from 0 to 65535, in units of 1/10000 mW ..and express in units of dBm. Example: A value of 60000 represents a receivedPower reading of 7.78 dBm. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| raisecomOpticalMonitorMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.8886.1.9.1 | |||
| raisecomOpticalMonGroup OBJECT-IDENTITY | 1.3.6.1.4.1.8886.1.9.1.1 | |||
| raisecomOpticalMonTable OBJECT-TYPE This table provides objects to monitor optical parameters in a network element. | 1.3.6.1.4.1.8886.1.9.1.1.1 | not-accessible | current | |
| raisecomOpticalMonEntry OBJECT-TYPE An entry in the raisecomOpticalMonTable provides objects to monitor an optical parameter at an optical interface. | 1.3.6.1.4.1.8886.1.9.1.1.1.1 | not-accessible | current | |
| raisecomOpticalMonParameterType OBJECT-TYPE This object specifies the optical parameter that is being monitored in this entry. | 1.3.6.1.4.1.8886.1.9.1.1.1.1.1 | OpticalParameterType | not-accessible | current |
| raisecomOpticalParameterValue OBJECT-TYPE This object gives the value measured for the particular optical parameter specified by the raisecomOpticalMonParameterType object. | 1.3.6.1.4.1.8886.1.9.1.1.1.1.2 | OpticalParameterValue | read-only | current |
| raisecomOpticalParamHighAlarmThresh OBJECT-TYPE This object gives the high alarm threshold on the optical parameter being monitored. An alarm condition will be raised if the value given by raisecomOpticalParameterValue goes from below the value of this object to above the value of this object, or if the initial value of raisecomOpticalParameterValue exceeds the value of this object. This alarm will be indicated in the raisecomOpticalParamAlarmStatus object. | 1.3.6.1.4.1.8886.1.9.1.1.1.1.3 | OpticalParameterValue | read-only | current |
| raisecomOpticalParamHighWarningThresh OBJECT-TYPE This object is used to set a high warning threshold on the optical parameter being monitored. A threshold crossing condition will be indicated if the value given by raisecomOpticalParameterValue goes from below the value of this object to above the value of this object, or if the initial value of raisecomOpticalParameterValue exceeds the value of this object. This alarm will be indicated in the raisecomOpticalParamAlarmStatus object. | 1.3.6.1.4.1.8886.1.9.1.1.1.1.4 | OpticalParameterValue | read-only | current |
| raisecomOpticalParamLowAlarmThresh OBJECT-TYPE This object is used to set a low alarm threshold on the optical parameter being monitored. An alarm condition will be raised if the value given by raisecomOpticalParameterValue goes from above the value of this object to below the value of this object, or if the initial value of raisecomOpticalParameterValue is lower than the value of this object. This alarm will be indicated in the raisecomOpticalParamAlarmStatus object .. | 1.3.6.1.4.1.8886.1.9.1.1.1.1.5 | OpticalParameterValue | read-only | current |
| raisecomOpticalParamLowWarningThresh OBJECT-TYPE This object is used to set a low warning threshold on the optical parameter being monitored. A threshold crossing condition will be indicated if the value given by raisecomOpticalParameterValue goes from above the value of this object to below the value of this object, or if the initial value of raisecomOpticalParameterValue object is lower than the value of this object. For network elements in the status indications, this threshold violation will be indicated in the raisecomOpticalParamAlarmStatus object . | 1.3.6.1.4.1.8886.1.9.1.1.1.1.6 | OpticalParameterValue | read-only | current |
| raisecomOpticalParamAlarmStatus OBJECT-TYPE This object is used to indicate the current status of the thresholds for the monitored optical parameter on the interface. If a threshold is currently being exceeded on the interface, the object will be set. Otherwise, the object will be set to 0. | 1.3.6.1.4.1.8886.1.9.1.1.1.1.7 | INTEGER {none(0), high-alarm-threshold(1), high-warning-threshold(2), low-alarm-threshold(3), low-warning-threshold(4)} | read-only | current |
| raisecomOpticalParamAlarmLastValue OBJECT-TYPE This object indicates the optical parameter value at the last time a threshold related to a particular optical parameter was exceeded on the interface. If no threshold value is currently being exceeded, then the value '-1000000' is returned. | 1.3.6.1.4.1.8886.1.9.1.1.1.1.8 | OpticalParameterValue | read-only | current |
| raisecomOpticalParamAlarmLastChange OBJECT-TYPE This object specifies the value of sysUpTime at the last time a threshold related to a particular optical parameter was exceeded on the interface. | 1.3.6.1.4.1.8886.1.9.1.1.1.1.9 | TimeTicks | read-only | current |
| raisecomOpticalMon15MinValidIntervals OBJECT-TYPE This object gives the number of previous 15 minute intervals for which valid performance monitoring data has been stored on the interface. The value of this object will be n (where n is the maximum number of 15 minute intervals supported at this interface), unless the measurement was (re-)started within the last (nx15) minutes, in which case the value will be the number of previous 15 minute intervals for which the agent has some data. | 1.3.6.1.4.1.8886.1.9.1.1.1.1.10 | Unsigned32 (0..96) | read-only | current |
| raisecomOpticalMon24HrValidIntervals OBJECT-TYPE This object gives the number of previous 24 hour intervals for which valid performance monitoring data has been stored on the interface. The value of this object will be 0 if the measurement was (re-)started within the last 24 hours, or 1 otherwise. | 1.3.6.1.4.1.8886.1.9.1.1.1.1.11 | Unsigned32 (0..1) | read-only | current |
| raisecomOpticalMonValidStatus OBJECT-TYPE This object indicates the parameter row is valid or not. | 1.3.6.1.4.1.8886.1.9.1.1.1.1.12 | INTEGER {valid(1), invalid(2)} | read-only | current |
| raisecomOpticalNotifyEnable OBJECT-TYPE This object specifies the generation of raisecomOpticalMonParameterStatus notifications. | 1.3.6.1.4.1.8886.1.9.1.1.2 | EnableVar | read-write | current |
| raisecomOpticalDigitalDiagnoticEnable OBJECT-TYPE Enable or disable digitaldiagnotic on the switch. | 1.3.6.1.4.1.8886.1.9.1.1.3 | EnableVar | read-write | current |
| raisecomOpticalPMGroup OBJECT-IDENTITY | 1.3.6.1.4.1.8886.1.9.1.2 | |||
| raisecomOpticalPMCurrentTable OBJECT-TYPE This table contains performance monitoring data for the various optical parameters, collected over the current 15 minute or the current 24 hour interval. | 1.3.6.1.4.1.8886.1.9.1.2.1 | not-accessible | current | |
| raisecomOpticalPMCurrentEntry OBJECT-TYPE An entry in the raisecomOpticalPMCurrentTable. It contains performance monitoring data for a monitored optical parameter at an interface, collected over the current 15 minute or the current 24 hour interval. | 1.3.6.1.4.1.8886.1.9.1.2.1.1 | not-accessible | current | |
| raisecomOpticalPMCurrentPeriod OBJECT-TYPE This object indicates whether the optical parameter values given in this entry are collected over the current 15 minute or the current 24 hour interval. | 1.3.6.1.4.1.8886.1.9.1.2.1.1.1 | OpticalPMPeriod | not-accessible | current |
| raisecomOpticalPMCurrentParamType OBJECT-TYPE This object specifies the optical parameter that is being monitored, in this entry. | 1.3.6.1.4.1.8886.1.9.1.2.1.1.2 | OpticalParameterType | not-accessible | current |
| raisecomOpticalPMCurrentMaxParam OBJECT-TYPE This object gives the maximum value measured for the monitored optical parameter, in the current 15 minute or the current 24 hour interval. | 1.3.6.1.4.1.8886.1.9.1.2.1.1.3 | OpticalParameterValue | read-only | current |
| raisecomOpticalPMCurrentMinParam OBJECT-TYPE This object gives the minimum value measured for the monitored optical parameter, in the current 15 minute or the current 24 hour interval. | 1.3.6.1.4.1.8886.1.9.1.2.1.1.4 | OpticalParameterValue | read-only | current |
| raisecomOpticalPMCurrentMeanParam OBJECT-TYPE This object gives the average value of the monitored optical parameter, in the current 15 minute or the current 24 hour interval. | 1.3.6.1.4.1.8886.1.9.1.2.1.1.5 | OpticalParameterValue | read-only | current |
| raisecomOpticalPMIntervalTable OBJECT-TYPE This table stores performance monitoring data for the various optical parameters, collected over previous intervals. This table can have entries for one complete 24 hour interval and up to 96 complete 15 minute intervals. A system is required to store at least 4 completed 15 minute intervals. The number of valid 15 minute intervals in this table is indicated by the cOpticalMon15MinValidIntervals object and the number of valid 24 hour intervals is indicated by the cOpticalMon24HrValidIntervals object. | 1.3.6.1.4.1.8886.1.9.1.2.2 | not-accessible | current | |
| raisecomOpticalPMIntervalEntry OBJECT-TYPE An entry in the raisecomOpticalPMIntervalTable. It contains performance monitoring data for an optical parameter, collected over a previous interval. | 1.3.6.1.4.1.8886.1.9.1.2.2.1 | not-accessible | current | |
| raisecomOpticalPMIntervalPeriod OBJECT-TYPE This object indicates whether the optical parameter values, given in this entry, are collected over a period of 15 minutes or 24 hours. | 1.3.6.1.4.1.8886.1.9.1.2.2.1.1 | OpticalPMPeriod | not-accessible | current |
| raisecomOpticalPMIntervalNumber OBJECT-TYPE A number between 1 and 96, which identifies the interval for which the set of optical parameter values is available. The interval identified by 1 is the most recently completed 15 minute or 24 hour interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. | 1.3.6.1.4.1.8886.1.9.1.2.2.1.2 | Integer32 (1..96) | not-accessible | current |
| raisecomOpticalPMIntervalParamType OBJECT-TYPE This object specifies the optical parameter that is being monitored, in this entry. | 1.3.6.1.4.1.8886.1.9.1.2.2.1.3 | OpticalParameterType | not-accessible | current |
| raisecomOpticalPMIntervalMaxParam OBJECT-TYPE This object gives the maximum value measured for the optical parameter, in a particular 15 minute or 24 hour interval. | 1.3.6.1.4.1.8886.1.9.1.2.2.1.4 | OpticalParameterValue | read-only | current |
| raisecomOpticalPMIntervalMinParam OBJECT-TYPE This object gives the minimum value measured for the optical parameter, in a particular 15 minute or 24 hour interval. | 1.3.6.1.4.1.8886.1.9.1.2.2.1.5 | OpticalParameterValue | read-only | current |
| raisecomOpticalPMIntervalMeanParam OBJECT-TYPE This object gives the average value of the measured optical parameter, in a particular 15 minute or 24 hour interval. | 1.3.6.1.4.1.8886.1.9.1.2.2.1.6 | OpticalParameterValue | read-only | current |
| raisecomTranceiverInfoTable OBJECT-TYPE Trancetver information Table. | 1.3.6.1.4.1.8886.1.9.1.4 | not-accessible | current | |
| raisecomTranceiverInfoEntry OBJECT-TYPE An entry in the raisecomSfpAccessA0Table. | 1.3.6.1.4.1.8886.1.9.1.4.1 | not-accessible | current | |
| raisecomTranceiverType OBJECT-TYPE Type of the interface, such as 1000_BASE_SX_SFP | 1.3.6.1.4.1.8886.1.9.1.4.1.1 | OCTET STRING | read-only | current |
| raisecomTranceiverConnectorType OBJECT-TYPE ConnectorType of the interface, such as SC/LC | 1.3.6.1.4.1.8886.1.9.1.4.1.2 | OCTET STRING | read-only | current |
| raisecomTranceiverWavelength OBJECT-TYPE Wavelength of the interface, measured in nm. | 1.3.6.1.4.1.8886.1.9.1.4.1.3 | Integer32 | read-only | current |
| raisecomTranceiverVendorName OBJECT-TYPE Vendor name of the interface. | 1.3.6.1.4.1.8886.1.9.1.4.1.4 | OCTET STRING | read-only | current |
| raisecomTranceiverVendorPN OBJECT-TYPE Vendor part number of the interface. | 1.3.6.1.4.1.8886.1.9.1.4.1.5 | OCTET STRING | read-only | current |
| raisecomTranceiverVendorSN OBJECT-TYPE Vendor serial number of the interface. | 1.3.6.1.4.1.8886.1.9.1.4.1.6 | OCTET STRING | read-only | current |
| raisecomTransceiverFiberType OBJECT-TYPE Types of the fiber, single_mode, multi_mode, none. | 1.3.6.1.4.1.8886.1.9.1.4.1.7 | INTEGER {single-mode(1), multi-mode(2), none(3)} | read-only | current |
| raisecomTransceiverTransferDistance OBJECT-TYPE The max distance which the interface could transmit, measured in meter. | 1.3.6.1.4.1.8886.1.9.1.4.1.8 | Integer32 | read-only | current |
| raisecomOpticalMonitorMIBNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.8886.1.9.2 | |||
| raisecomOpticalMonitorMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.8886.1.9.3 | |||
| raisecomOpticalMonitorMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.8886.1.9.3.1 | |||
| raisecomOpticalMonitorMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.8886.1.9.3.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| raisecomOpticalMonParameterStatus NOTIFICATION-TYPE This notification is sent when any threshold related to an optical parameter is exceeded on an interface. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable object. | 1.3.6.1.4.1.8886.1.9.2.1 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| raisecomOpticalMonitorMIBCompliance MODULE-COMPLIANCE The compliance statement for network elements that monitor optical characteristics and thresholds on the optical interfaces in a network element. | 1.3.6.1.4.1.8886.1.9.3.1.1 | current |
| raisecomOpticalMIBMonGroup OBJECT-GROUP A mandatory object that provides monitoring of optical characteristics. | 1.3.6.1.4.1.8886.1.9.3.2.1 | current |
| raisecomOpticalMIBThresholdGroup OBJECT-GROUP A collection of objects that support thresholds on optical parameters and provide status information when the thresholds are exceeded . | 1.3.6.1.4.1.8886.1.9.3.2.2 | current |
| raisecomOpticalMIBPMGroup OBJECT-GROUP A collection of objects that provide optical performance monitoring data for 15 minute and 24 hour intervals. | 1.3.6.1.4.1.8886.1.9.3.2.3 | current |
| raisecomOpticalMIBNotifyEnableGroup OBJECT-GROUP An object to control the generation of notifications. | 1.3.6.1.4.1.8886.1.9.3.2.4 | current |
| raisecomOpticalMIBNotifGroup NOTIFICATION-GROUP A notification generated when a threshold on an optical parameter is exceeded or cleared. | 1.3.6.1.4.1.8886.1.9.3.2.5 | current |